ALCATEL-IND1-VRRP-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary VRRP MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-VRRP-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-VRRP-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.28.1Imports
| ALCATEL-IND1-BASE | softentIND1Vrrp |
|---|---|
| ALCATEL-IND1-VRRP3-MIB | alaVrrp3OperEntry, alaVrrp3OperIpVersion, alaVrrp3OperVrId |
| IF-MIB | InterfaceIndexOrZero, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
| VRRP-MIB | vrrpOperEntry, vrrpOperVrId |
| VRRPV3-MIB | vrrpv3OperationsEntry, vrrpv3OperationsInetAddrType, vrrpv3OperationsVrId |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1VRRPMIB | 1.3.6.1.4.1.6486.801.1.2.1.28.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary VRRP MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1VRRPMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1 | |||
| NalaVRRPConfig | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1 | |||
| SalaVRRPStartDelay | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.1 | Integer32 (0..180) | RW | |
scalar · Integer32 (0..180) · read-write · current Once VRRP's initial configuration is complete at startup, this object specifies the number of seconds VRRP will delay before leaving the initialize state. This delay is to allow external protocols (spanning tree, OSPF, etc.) time to converge so that when a VRRP virtual router becomes master it will be able to forward traffic.
| ||||
| SalaVrrpBfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable the BFD for VRRP.
| ||||
| NalaVrrpTracking | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2 | |||
| TalaVrrpTrackTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1 | NA | ||
table · not-accessible · current VRRP Tracking Policy table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpTrackEntry' items. | ||||
| RalaVrrpTrackEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1 | NA | ||
row · not-accessible · current An entry in the vrrpTrackTable containing the operational characteristics of a VRRP tracking policy. Rows in the table cannot be modified unless the value of 'vrrpTrackAdminState' is 'disabled'.
| ||||
| CalaVrrpTrackId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.1 | AlaVrTrackId | NA | |
column · AlaVrTrackId · not-accessible · current This object contains the Tracking Policy Identifier (TRACKID). | ||||
| CalaVrrpTrackState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The conditional state of the tracking policy entity.
| ||||
| CalaVrrpTrackAdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This object will enable/disable the tracking policy function.
| ||||
| CalaVrrpTrackEntityType | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object specifies the tracking policy entity type currently in use.
| ||||
| CalaVrrpTrackEntityPort | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.6 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This object contains the Tracking Policy Entity. A port ifIndex or 0 if not significant. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | ||||
| CalaVrrpTrackPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.8 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current This object specifies the value by which the priority of virtual routers associated with the tracking policy will be decremented when the tracked entity's operational state transitions from up to down, or will be incremented when the tracked entity's operational state transitions from down to up. | ||||
| CalaVrrpTrackRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpTrackRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instances of `vrrpTrackId', and either one of : alaVrrpTrackEntityPort, or alaVrrpTrackEntityInterface have been set. | ||||
| CalaVrrpTrackEntityInterface | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.10 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This object contains the Tracking Policy Entity. An interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | ||||
| CalaVrrpTrackEntityIpv6Interface | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.11 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This object contains the Tracking Policy Entity. An Ipv6 interface. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | ||||
| CalaVrrpTrackEntityIpAddrType | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.12 | InetAddressType | RC | |
column · InetAddressType · read-create · current This object contains the Tracking Policy Entity IP Address type. | ||||
| CalaVrrpTrackEntityIpAddr | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.13 | InetAddress | RC | |
column · InetAddress · read-create · current This object contains the Tracking Policy Entity. An IPv4 for or IPv6 Address based on alaVrrpTrackEntityIpAddrType. The alaVrrpTrackEntityPort, alaVrrpTrackEntityInterface, alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr are mutually exclusive of one another. The last one set is the valid one and identifies the entity type. | ||||
| CalaVrrpTrackBfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Enables BFD for a VRRP track.
| ||||
| CalaVrrpTrackDelay | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.1.1.15 | Integer32 (0..60) | RC | |
column · Integer32 (0..60) · read-create · current This object specifies a delay value, in seconds, applied when an address tracking policy's operational state transitions to up. The effect is to delay incrementing the priority of the virtual routers associated with the tracking policy.
| ||||
| TalaVrrpAssoTrackTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2 | NA | ||
table · not-accessible · current The table of tracking policies associated with this virtual router. | ||||
| RalaVrrpAssoTrackEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1 | NA | ||
row · not-accessible · current An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrpTrackCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the 'vrrpOperState' has transitioned to `initialize'. | ||||
| CalaVrrpAssoTrackId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.1 | AlaVrTrackId | NA | |
column · AlaVrTrackId · not-accessible · current The identifier of the tracking policy the virtual router is responsible for monitoring. | ||||
| CalaVrrpAssoTrackRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent. | ||||
| TalaVrrp3AssoTrackTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3 | NA | ||
table · not-accessible · current The table of tracking policies associated with this virtual router. | ||||
| RalaVrrp3AssoTrackEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1 | NA | ||
row · not-accessible · current An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given IP Version, VrId, and ifIndex will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrp3TrackCount'). Rows in the table cannot be modified unless the value of `alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'. | ||||
| CalaVrrp3AssoTrackId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.1 | AlaVrTrackId | NA | |
column · AlaVrTrackId · not-accessible · current The identifier of the tracking policy the virtual router is responsible for monitoring. | ||||
| CalaVrrp3AssoTrackRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.3.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent. | ||||
| TalaVrrpv3AssoTrackTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4 | NA | ||
table · not-accessible · current The table of tracking policies associated with this virtual router. | ||||
| RalaVrrpv3AssoTrackEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1 | NA | ||
row · not-accessible · current An entry in the table contains a tracking policy id that is associated with a virtual router. The number of rows for a given IP Version, VrId, and ifIndex will equal the number of tracking policies associated with the virtual router (equivalent to alaVrrp3TrackCount'). Rows in the table cannot be modified unless the value of `alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'. | ||||
| CalaVrrpv3AssoTrackId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1.1 | AlaVrTrackId | NA | |
column · AlaVrTrackId · not-accessible · current The identifier of the tracking policy the virtual router is responsible for monitoring. | ||||
| CalaVrrpv3AssoTrackRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.2.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated tracking policy for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated tracking policy from the virtual router. The use of other values is implementation-dependent. | ||||
| NalaVrrpOperations | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3 | |||
| TalaVrrpOperTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1 | NA | ||
table · not-accessible · current Table of virtual router configuration info. | ||||
| RalaVrrpOperEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1 | NA | ||
row · not-accessible · current An entry in the table, config information about a given virtual router.
| ||||
| CalaVrrpCurrentPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). | ||||
| CalaVrrpTrackCount | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The number of tracking policies associated with a virtual router. | ||||
| CalaVrrpGroupIdent | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.1.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group. | ||||
| TalaVrrp3OperExTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2 | NA | ||
table · not-accessible · current Table of virtual router configuration info. | ||||
| RalaVrrp3OperExEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1 | NA | ||
row · not-accessible · current An entry in the table, config information about a given virtual router.
| ||||
| CalaVrrp3CurrentPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). | ||||
| CalaVrrp3TrackCount | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The number of tracking policies associated with a virtual router. | ||||
| CalaVrrp3GroupIdent | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.2.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group. | ||||
| TalaVrrpv3OperationsExTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3 | NA | ||
table · not-accessible · current Table of virtual router configuration info. | ||||
| RalaVrrpv3OperationsExEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1 | NA | ||
row · not-accessible · current An entry in the table, config information about a given virtual router.
| ||||
| CalaVrrpv3CurrentPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current This object specifies the priority currently used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). | ||||
| CalaVrrpv3TrackCount | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The number of tracking policies associated with a virtual router. | ||||
| CalaVrrpv3GroupIdent | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The VRRP group to which this virtual router belongs. A value of zero indicates that the virtual router is not affiliated with any group. | ||||
| CalaVrrpv3OperVersion | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The VRRP version for this IPv4 virtual router.
| ||||
| CalaVrrpv3OperInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.3.3.1.5 | TimeInterval (1..25500) | RW | |
column · TimeInterval (1..25500) · read-write · current The VRRP version 3 IPv4 Interface time interval, in centiseconds, between sending advertisement messages. | ||||
| NalaVRRPv2Config | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4 | |||
| SalaVRRPDefaultInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.1 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current The VRRP Router default time interval, in seconds, between sending advertisement messages.
| ||||
| SalaVRRPDefaultPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.2 | Integer32 (1..254) | RW | |
scalar · Integer32 (1..254) · read-write · current This object specifies the VRRP Router default priority to be used for the virtual router master election process. Higher values imply higher priority. | ||||
| SalaVRRPDefaultPreemptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current The VRRP Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | ||||
| SalaVRRPAdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to force a change in to the vrrpOperAdminState of virtual routers in the vrrpOperTable. Setting a value of allEnable will cause the vrrpOperAdminState of each entry in the table to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set.
| ||||
| SalaVRRPSetParam | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to force the virtual routers in the vrrpOperTable to revert to the default parameter values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. Unless alaVRRPOverride is set to true only virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set.
| ||||
| SalaVRRPOverride | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.4.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used in combination with the alaVRRPSetParam object to force all virtual routers in the vrrpOperTable to revert to the default values specified in alaVRRPDefaultInterval, alaVRRPDefaultPriority, and alaVRRPDefaultPreemptMode. This object is of little value when read but will return the last value to which it was set. | ||||
| NalaVrrpGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5 | |||
| TalaVrrpGroupTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1 | NA | ||
table · not-accessible · current VRRP Group table, which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpGroupEntry' items. | ||||
| RalaVrrpGroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1 | NA | ||
row · not-accessible · current An entry in the vrrpGroupTable containing the characteristics of a VRRP group.
| ||||
| CalaVrrpGroupId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.1 | AlaVrGroupId | NA | |
column · AlaVrGroupId · not-accessible · current This object contains the Tracking Policy Identifier (GROUPID). | ||||
| CalaVrrpGroupInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.2 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current The VRRP Group time interval, in seconds, between sending advertisement messages.
| ||||
| CalaVrrpGroupPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.3 | Integer32 (1..254) | RC | |
column · Integer32 (1..254) · read-create · current This object specifies the VRRP Group priority to be used for the virtual router master election process. Higher values imply higher priority. | ||||
| CalaVrrpGroupPreemptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current The VRRP Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | ||||
| CalaVrrpGroupAdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to force a change in to the vrrpOperAdminState of virtual routers in the corresponding alaVRRPAssoGroupTable entry. Setting a value of allEnable will cause the vrrpOperAdminState of each vrrpOperEntry to be set to up. Setting a value of enable will set the vrrpOperAdminState to up but only for the set of virtual routers in the group whose vrrpOperAdminState was down by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVrrpGroupAdminState or alaVRRPAdminState to disable. Setting a value of disable will cause the vrrpOperAdminState of each entry in the table to be set to down. This object is of little value when read but will return the last value to which it was set.
| ||||
| CalaVrrpGroupSetParam | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to force the virtual routers in the corresponding alaVRRPAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. Unless alaVrrpGroupOverride is set to true only virtual routers previously configured with default or group parameter values are modified. Parameters can be modified individually with the interval, priority, and preempt values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set.
| ||||
| CalaVrrpGroupOverride | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current This object is used in combination with the alaVrrpGroupSetParam object to force all virtual routers in the corresponding alaVrrpAssoGroupTable to revert to the group parameter values specified in alaVrrpGroupInterval, alaVrrpGroupPriority, and alaVrrpGroupPreemptMode. This object is of little value when read but will return the last value to which it was set. | ||||
| CalaVrrpGroupRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.1.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `alaVrrpGroupRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `alaVrrpGroupId' has been set. | ||||
| TalaVrrpAssoGroupTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2 | NA | ||
table · not-accessible · current The table of virtual routers associated with this group. | ||||
| RalaVrrpAssoGroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1 | NA | ||
row · not-accessible · current An entry in the table contains a virtual router id that is associated with a virtual router group.
| ||||
| CalaVrrpAssoGroupRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.2.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group. Destroying the entry or setting it to notInService(2) removes the associated virtual router from the group. The use of other values is implementation-dependent. | ||||
| TalaVrrpv3GroupTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3 | NA | ||
table · not-accessible · current VRRP version 3 Group table, which consists of a sequence (i.e., one or more conceptual rows) of 'alaVrrpv3GroupEntry' items. | ||||
| RalaVrrpv3GroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1 | NA | ||
row · not-accessible · current An entry in the vrrpv3GroupTable containing the characteristics of a VRRP version 3 group.
| ||||
| CalaVrrpv3GroupId | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.1 | AlaVrGroupId | NA | |
column · AlaVrGroupId · not-accessible · current This object contains the VRRP version 3 Group Identifier (GROUPID). | ||||
| CalaVrrpv3GroupInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.2 | TimeInterval (1..25500) | RC | |
column · TimeInterval (1..25500) · read-create · current The VRRP version 3 Group time interval, in seconds, between sending advertisement messages.
| ||||
| CalaVrrpv3GroupPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.3 | Integer32 (1..254) | RC | |
column · Integer32 (1..254) · read-create · current This object specifies the VRRP version 3 Group priority to be used for the virtual router master election process. Higher values imply higher priority. | ||||
| CalaVrrpv3GroupPreemptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current The VRRP version 3 Group preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | ||||
| CalaVrrpv3GroupAcceptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The VRRP version 3 Group accept mode. Controls whether a virtual router in the master state will accept packets addressed to the address owner's address as its own even when it is not the address owner. | ||||
| CalaVrrpv3GroupVersion | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The IPv4 VRRP group version.
| ||||
| CalaVrrpv3GroupAdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to force a change in to the vrrpv3OperationsRowStatus of virtual routers in the corresponding alaVRRPv3AssoGroupTable entry. Setting a value of allEnable will cause the vrrpv3OperationsRowStatus of each vrrpv3OperationsEntry to be set to active. Setting a value of enable will set the vrrpv3OperationsRowStatus to active but only for the set of virtual routers in the group whose vrrpv3OperationsRowStatus was notInService by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVrrpv3GroupAdminState or alaVRRPv3AdminState to disable. Setting a value of disable will cause the vrrpv3OperationsRowStatus of each entry in the table to be set to notInService. This object is of little value when read but will return the last value to which it was set.
| ||||
| CalaVrrpv3GroupSetParam | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to force the virtual routers in the corresponding alaVRRPv3AssoGroupTable to revert to the group parameter values specified in alaVrrpv3GroupInterval, alaVrrpv3GroupPriority, alaVrrpv3GroupPreemptMode, alaVrrpv3GroupAcceptMode and alaVrrpv3GroupVersion. Unless alaVrrpv3GroupOverride is set to true only virtual routers previously configured with default or group parameter values are modified. Parameters can be modified individually with the interval, priority, preempt, accept, and version values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set.
| ||||
| CalaVrrpv3GroupOverride | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current This object is used in combination with the alaVrrpv3GroupSetParam object to force all virtual routers in the corresponding alaVrrpv3AssoGroupTable to revert to the group parameter values specified in alaVrrpv3GroupInterval, alaVrrpv3GroupPriority, alaVrrpv3GroupPreemptMode, alaVrrpv3GroupAcceptMode and alaVrrpv3GroupVersion. This object is of little value when read but will return the last value to which it was set. | ||||
| CalaVrrpv3GroupRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.3.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `alaVrrpv3GroupRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `alaVrrpv3GroupId' has been set. | ||||
| TalaVrrpv3AssoGroupTable | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4 | NA | ||
table · not-accessible · current The table of VRRP version 3 virtual routers associated with this group. | ||||
| RalaVrrpv3AssoGroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4.1 | NA | ||
row · not-accessible · current An entry in the table contains a virtual router id that is associated with a VRRP version 3 virtual router group. | ||||
| CalaVrrpv3AssoGroupRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.5.4.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated virtual router for a group. Destroying the entry or setting it to notInService(2) removes the associated virtual router from the group. The use of other values is implementation-dependent. | ||||
| NalaVRRPv3IPv4Config | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6 | |||
| SalaVRRPv3IPv4DefaultInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.1 | TimeInterval (1..25500) | RW | |
scalar · TimeInterval (1..25500) · read-write · current The VRRP version 3 IPv4 Router default time interval, in seconds, between sending advertisement messages.
| ||||
| SalaVRRPv3IPv4DefaultPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.2 | Integer32 (1..254) | RW | |
scalar · Integer32 (1..254) · read-write · current The VRRP version 3 IPv4 Router default priority to be used for the virtual router master election process. Higher values imply higher priority. | ||||
| SalaVRRPv3IPv4DefaultPreemptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current The VRRP version 3 IPv4 Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | ||||
| SalaVRRPv3IPv4DefaultAcceptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current The VRRP version 3 IPv4 Router default accept mode. Controls whether a virtual router in the master state will accept packets addressed to the address owner's address as its own even when it is not the address owner. | ||||
| SalaVRRPv3IPv4DefaultVersion | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object contains the default VRRP version for all IPv4 virtual routers.
| ||||
| SalaVRRPv3IPv4AdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to force a change in to the vrrpv3OperationsRowStatus of IPv4 virtual routers in the vrrpv3OperationsTable. Setting a value of allEnable will cause the vrrpv3OperationsRowStatus of each IPv4 entry in the table to be set to active. Setting a value of enable will set the vrrpv3OperationsRowStatus to active but only for the set of IPv4 virtual routers whose vrrpv3OperationsRowStatus was notInService by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPv3IPv4AdminState to disable. Setting a value of disable will cause the vrrpv3OperationsRowStatus of each IPv4 entry in the table to be set to notInService. This object is of little value when read but will return the last value to which it was set.
| ||||
| SalaVRRPv3IPv4SetParam | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to force the IPv4 virtual routers in the vrrpv3OperationsTable to revert to the default parameter values specified in alaVRRPv3IPv4DefaultInterval, alaVRRPv3IPv4DefaultPriority, alaVRRPv3IPv4DefaultPreemptMode, alaVRRPv3IPv4DefaultAcceptMode, and alaVRRPv3IPv4DefaultVersion. Unless alaVRRPv3IPv4Override is set to true only IPv4 virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, preempt, accept, and version values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set.
| ||||
| SalaVRRPv3IPv4Override | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.6.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used in combination with the alaVRRPv3IPv4SetParam object to force all IPv4 virtual routers in the vrrpv3Operations Table to revert to the default values specified in alaVRRPv3IPv4DefaultInterval, alaVRRPv3IPv4DefaultPriority, alaVRRPv3IPv4DefaultPreemptMode, and alaVRRPv3IPv4DefaultAcceptMode. This object is of little value when read but will return the last value to which it was set. | ||||
| NalaVRRPv3IPv6Config | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7 | |||
| SalaVRRPv3IPv6DefaultInterval | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.1 | TimeInterval (1..4095) | RW | |
scalar · TimeInterval (1..4095) · read-write · current The VRRP version 3 IPv6 Router default time interval, in seconds, between sending advertisement messages.
| ||||
| SalaVRRPv3IPv6DefaultPriority | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.2 | Integer32 (1..254) | RW | |
scalar · Integer32 (1..254) · read-write · current The VRRP version 3 IPv6 Router default priority to be used for the virtual router master election process. Higher values imply higher priority. | ||||
| SalaVRRPv3IPv6DefaultPreemptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current The VRRP version 3 IPv6 Router default preempt mode. Controls whether a higher priority virtual router will preempt a lower priority master. | ||||
| SalaVRRPv3IPv6DefaultAcceptMode | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current The VRRP version 3 IPv6 Router default accept mode. Controls whether a virtual router in the master state will accept packets addressed to the address owner's address as its own even when it is not the address owner. | ||||
| SalaVRRPv3IPv6AdminState | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to force a change in to the vrrpv3OperationsRowStatus of IPv6 virtual routers in the vrrpv3OperationsTable. Setting a value of allEnable will cause the vrrpv3OperationsRowStatus of each IPv6 entry in the table to be set to active. Setting a value of enable will set the vrrpv3OperationsRowStatus to active but only for the set of IPv6 virtual routers whose vrrpv3OperationsRowStatus was notInService by default (as occurs when the virtual router instance is created) or due to a previous set command of the alaVRRPv3IPv6AdminState to disable. Setting a value of disable will cause the vrrpv3OperationsRowStatus of each IPv6 entry in the table to be set to notInService. This object is of little value when read but will return the last value to which it was set.
| ||||
| SalaVRRPv3IPv6SetParam | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to force the IPv6 virtual routers in the vrrpv3OperationsTable to revert to the default parameter values specified in alaVRRPv3IPv6DefaultInterval, alaVRRPv3IPv6DefaultPriority, alaVRRPv3IPv6DefaultPreemptMode, alaVRRPv3IPv6DefaultAcceptMode. Unless alaVRRPv3IPv4Override is set to true only IPv6 virtual routers previously configured with default parameter values are modified. Parameters can be modified individually with the interval, priority, preempt, and accept values, or collectively with the all value. This object is of little value when read but will return the last value to which it was set.
| ||||
| SalaVRRPv3IPv6Override | 1.3.6.1.4.1.6486.801.1.2.1.28.1.1.7.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used in combination with the alaVRRPv3IPv6SetParam object to force all IPv6 virtual routers in the vrrpv3Operations Table to revert to the default values specified in alaVRRPv3IPv6DefaultInterval, alaVRRPv3IPv6DefaultPriority, alaVRRPv3IPv6DefaultPreemptMode, and alaVRRPv3IPv6DefaultAcceptMode. This object is of little value when read but will return the last value to which it was set. | ||||
| NalcatelIND1VRRPMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2 | |||
| NalcatelIND1VRRPMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1 | |||
| MalaVRRPCompliance | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.1.1 | |||
compliance · current The compliance statement for switches with Alcatel VRRP and implementing ALCATEL-IND1-VRRP-MIB.
| ||||
| NalcatelIND1VRRPMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2 | |||
| GalaVRRPConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.1 | |||
group · current A collection of objects to support management of Alcatel VRRP.
| ||||
| GalaVRRPv2ConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.2 | |||
group · current A collection of objects to support management of Alcatel VRRP | ||||
| GalaVrrp3AssoTrackTableGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.3 | |||
group · current The table of tracking policies associated with this virtual router.
| ||||
| GalaVrrp3OperExEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.4 | |||
group · current Table of virtual router configuration info. | ||||
| GalaVrrpAssoGroupEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.5 | |||
group · current The table of virtual routers associated with this group.
| ||||
| GalaVrrpAssoTrackEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.6 | |||
group · current The table of tracking policies associated with this virtual router.
| ||||
| GalaVrrpOperEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.7 | |||
group · current Config information about a given virtual router. | ||||
| GalaVrrpGroupTableGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.8 | |||
group · current VRRP Group table objects with attributes of VRRP Group. | ||||
| GalaVrrpTrackGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.9 | |||
group · current VRRP Tracking Policy objects.
| ||||
| GalaVRRPv3IPv4ConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.10 | |||
group · current VRRP version 3 IPv4 default configuration objects. | ||||
| GalaVRRPv3IPv6ConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.11 | |||
group · current VRRP version 3 IPv6 default configuration objects. | ||||
| GalaVrrpv3GroupTableGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.12 | |||
group · current VRRP version 3 group table objects. | ||||
| GalaVrrpv3AssoGroupEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.13 | |||
| GalaVrrpv3AssoTrackEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.14 | |||
| GalaVrrpv3OperationsExEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.28.1.2.2.15 | |||
group · current VRRP version 3 operations table extension objects. | ||||
Textual conventions
AlaVrGroupIdInteger32 (1..255)A number that serves to uniquely identify a virtual router group.
AlaVrTrackIdInteger32 (1..255)A number that serves to uniquely identify a tracking policy.
Groups and compliance
- alaVRRPCompliance
- alaVRRPConfigGroup
- alaVRRPv2ConfigGroup
- alaVRRPv3IPv4ConfigGroup
- alaVRRPv3IPv6ConfigGroup
- alaVrrp3AssoTrackTableGroup
- alaVrrp3OperExEntryGroup
- alaVrrpAssoGroupEntryGroup
- alaVrrpAssoTrackEntryGroup
- alaVrrpGroupTableGroup
- alaVrrpOperEntryGroup
- alaVrrpTrackGroup
- alaVrrpv3AssoGroupEntryGroup
- alaVrrpv3AssoTrackEntryGroup
- alaVrrpv3GroupTableGroup
- alaVrrpv3OperationsExEntryGroup