ALCATEL-IND1-SYSTEM-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-SYSTEM-MIB <host> 1.3.6.1.4.1.6486.801.1.1.1.2.1Imports
| ALCATEL-IND1-BASE | hardentIND1System |
|---|---|
| ALCATEL-IND1-VIRTUAL-CHASSIS-MIB | VirtualOperChassisId, virtualChassisOperChasId |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| IPV6-TC | Ipv6Address |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IalcatelIND1SystemMIB | 1.3.6.1.4.1.6486.801.1.1.1.2.1 | ||||||||||||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | |||||||||||||
| NalcatelIND1SystemMIBObjects | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1 | ||||||||||||
node · current Branch For BOP Proprietary System Subsystem Managed Objects. | |||||||||||||
| NsystemMicrocode | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1 | ||||||||||||
| TsystemMicrocodePackageTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1 | NA | |||||||||||
table · not-accessible · current the microcode package table | |||||||||||||
| RsystemMicrocodePackageEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1 | NA | |||||||||||
row · not-accessible · current a row in the microcode package table | |||||||||||||
| CsystemMicrocodePackageDirectoryIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The package index for directories. Values 1-4 are pre-defined
as: loaded(1), certified(2), working(3), issu(4). Values 5+
are user working directories in /flash assigned by the system.
Values 5+ remain associated with a directory until reboot,
takeover, the directory no longer contains valid images or
the directory no longer exists. | |||||||||||||
| CsystemMicrocodePackageDirectory | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.2 | SnmpAdminString (SIZE (1..108)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..108)) · not-accessible · current The directory name under flash where the microcode package is found. Directories with names longer than 108 characters will be skipped. | |||||||||||||
| CsystemMicrocodePackageIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.3 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The index to the package sub table in the microcode table | |||||||||||||
| CsystemMicrocodePackageVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.4 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The version of the microcode package (Fos.img, Fbase.img, etc.) | |||||||||||||
| CsystemMicrocodePackageName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.5 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The name of the microcode package | |||||||||||||
| CsystemMicrocodePackageDescription | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.6 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The description of the microcode package | |||||||||||||
| CsystemMicrocodePackageStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the microcode package
| |||||||||||||
| CsystemMicrocodePackageSize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The size of the microcode package | |||||||||||||
| TsystemMicrocodeLoadedTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2 | NA | |||||||||||
table · not-accessible · current the microcode package table | |||||||||||||
| RsystemMicrocodeLoadedEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1 | NA | |||||||||||
| CsystemMicrocodeLoadedIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The index to the loaded package in microcode table | |||||||||||||
| CsystemMicrocodeLoadedDirectory | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.2 | SnmpAdminString (SIZE (1..108)) | RO | ||||||||||
column · SnmpAdminString (SIZE (1..108)) · read-only · current The directory name under flash where the microcode package is found. Directories with names longer than 108 characters will be skipped. | |||||||||||||
| CsystemMicrocodeLoadedVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.3 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The version of the microcode package (Fos.img, Fbase.img, etc.) | |||||||||||||
| CsystemMicrocodeLoadedName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.4 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The name of the microcode package | |||||||||||||
| CsystemMicrocodeLoadedDescription | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.5 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The description of the microcode package | |||||||||||||
| CsystemMicrocodeLoadedSize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.2.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The size of the microcode package | |||||||||||||
| NsystemBootParams | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2 | ||||||||||||
| SsystemBootNetwork | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.1 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current this object is the base IP address of the EMP for this CMM | |||||||||||||
| SsystemBootNetworkGateway | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current this object is the gateway of the EMP for this CMM | |||||||||||||
| SsystemBootNetworkNetmask | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current This is the Netmask of the EMP that is used when this CMM boots. | |||||||||||||
| NsystemHardware | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3 | ||||||||||||
| SsystemHardwareFlashMfg | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object identifies the manufacturer of the Flash memory used on this product. toshiba(7) is for hawk only. The reason 7 is used is because 5 is already used for micron and 6 is for kingston. toshiba, sandisk, and sst are compact flashes for the hawk only.
| |||||||||||||
| SsystemHardwareFlashSize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This object identifies the size of the flash memory available on this CMM. It is the total flash hardware memory and does not indicate how much of the memory is free, used, etc. | |||||||||||||
| SsystemHardwareMemoryMfg | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object identifies the manufacturer of the RAM memory used on this CMM.
| |||||||||||||
| SsystemHardwareMemorySize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.4 | Unsigned32 | RO | 2019244 | |||||||||
scalar · Unsigned32 · read-only · current This object identifies the size of the RAM memory available on this CMM. It is the total RAM hardware memory and does not indicate how much of the memory is free, used, etc. Example values from LibreNMS test devices
| |||||||||||||
| SsystemHardwareNVRAMBatteryLow | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.5 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies the whether the NVRAM battery is low. true(1), false(2) | |||||||||||||
| SsystemHardwareBootCpuType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the manufacturer and model number of the CPU. Currently, only two types of processors are enumerated.
| |||||||||||||
| SsystemHardwareJumperInterruptBoot | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.7 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Interrupt Boot Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| SsystemHardwareJumperForceUartDefaults | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.8 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Force Uart Defaults Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| SsystemHardwareJumperRunExtendedMemoryDiagnostics | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.9 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Run Extended Memory Diagnostics Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| SsystemHardwareJumperSpare | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.10 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Spare Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| TsystemHardwareFpgaVersionTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11 | NA | |||||||||||
table · not-accessible · current This table contains the FPGA version for each FPGA on this CMM | |||||||||||||
| RsystemHardwareFpgaVersionEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1 | NA | |||||||||||
row · not-accessible · current a row in the systemHardwareFpgaVersionTable | |||||||||||||
| CsystemHardwareFpgaVersionIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.1 | Integer32 (1..3) | RO | ||||||||||
column · Integer32 (1..3) · read-only · current This is the index to one of the FPGA versions on this CMM | |||||||||||||
| CsystemHardwareFpgaVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This is the major version of one of the FPGA devices on this CMM. refer to the systemHardwareMinorFpgaVersion for the minor number. | |||||||||||||
| CsystemHardwareFpgaManufacturer | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object identifies the manufacturer of the FPGA devices on this CMM.
| |||||||||||||
| SsystemHardwareBootRomVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.12 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the boot rom version | |||||||||||||
| SsystemHardwareBackupMiniBootVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.13 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the backup miniboot version. | |||||||||||||
| SsystemHardwareDefaultMiniBootVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.14 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the default miniboot version. | |||||||||||||
| SsystemHardwareMinorFpgaVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.15 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the minor FPGA version. Refer to the systemHardwareFpgaVersion for the major FPGA version number. | |||||||||||||
| SsystemHardwareCpldVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.16 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the CPLD version. | |||||||||||||
| SsystemHardwareUbootVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.17 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the Uboot version. | |||||||||||||
| SsystemHardwareProdRegId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.18 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the product ID register | |||||||||||||
| SsystemHardwareRevisionRegister | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.19 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the hardware revision register | |||||||||||||
| SsystemHardwareXfpId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.20 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the XFP ID | |||||||||||||
| SsystemHardwareUbootMinibootVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.21 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the Uboot-miniboot version. | |||||||||||||
| NsystemFileSystem | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4 | ||||||||||||
| TsystemFileSystemTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1 | NA | |||||||||||
table · not-accessible · current system file system table for this CMM. | |||||||||||||
| RsystemFileSystemEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1 | NA | |||||||||||
| CsystemFileSystemIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.1 | FileSystemIndex | RO | ||||||||||
column · FileSystemIndex · read-only · current Index to a specific file system. | |||||||||||||
| CsystemFileSystemName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.2 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The name of the file system. | |||||||||||||
| CsystemFileSystemFreeSpace | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current the free space in octets of this file system | |||||||||||||
| SsystemFileSystemDirectoryName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.2 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The name of a file system directory. This object is used in conjunction with an Action command. The Action command will set this directory name to the name of a specific directory. Information for all of the files in that directory will then be read from the file system and the appropriate values written in the entries in the systemFileSystemFile table. All this is being done to give snmp access to the file system files. | |||||||||||||
| SsystemFileSystemDirectoryDateTime | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.3 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current the date and time (in system format) of the last access to this directory | |||||||||||||
| TsystemFileSystemFileTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4 | NA | |||||||||||
table · not-accessible · current system file system File table for this CMM. This table is used by an Action command which will populate it with file information read from the files in the specified directory. | |||||||||||||
| RsystemFileSystemFileEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1 | NA | |||||||||||
row · not-accessible · current A row in the system file system File table | |||||||||||||
| CsystemFileSystemFileIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Index to a specific file system File. | |||||||||||||
| CsystemFileSystemFileName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.2 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The name of a file system File | |||||||||||||
| CsystemFileSystemFileType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.3 | SystemFileType | RO | ||||||||||
column · SystemFileType · read-only · current The Type of a file system File | |||||||||||||
| CsystemFileSystemFileSize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current size of this file | |||||||||||||
| CsystemFileSystemFileAttr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current attributes of this file
| |||||||||||||
| CsystemFileSystemFileDateTime | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.6 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current the modification date and time of a file | |||||||||||||
| NsystemServices | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5 | ||||||||||||
| SsystemServicesDate | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.1 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This object contains the current System Date in the following format: MM/DD/YYYY | |||||||||||||
| SsystemServicesTime | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.2 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This object contains the current System Time in the following format: HH:MM:SS | |||||||||||||
| SsystemServicesTimezone | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.3 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This object contains the current Hour Offset from UTC
in the following format: -13:00 to +12:00
OR
a well known timezone (PST,CST,etc.) | |||||||||||||
| SsystemServicesTimezoneStartWeek | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.4 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current first, second, third, fourth, fifth, last = 1,2,3,4,5,6 | |||||||||||||
| SsystemServicesTimezoneStartDay | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.5 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Sunday, Monday, Tues... = 1,2,3,4,5,6,7 | |||||||||||||
| SsystemServicesTimezoneStartMonth | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.6 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current January, February, march... = 1,2,3,4,5,67,8,9,10,11,12 | |||||||||||||
| SsystemServicesTimezoneStartTime | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.7 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current 2:00, 3:00, 4:00... = 200, 300, 400, etc. | |||||||||||||
| SsystemServicesTimezoneOffset | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.8 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current 60 minutes = 60 | |||||||||||||
| SsystemServicesTimezoneEndWeek | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.9 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current first, second, third, fourth, fifth, last = 1,2,3,4,5,6 | |||||||||||||
| SsystemServicesTimezoneEndDay | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.10 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Sunday, Monday, Tues... = 1,2,3,4,5,6,7 | |||||||||||||
| SsystemServicesTimezoneEndMonth | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.11 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12 | |||||||||||||
| SsystemServicesTimezoneEndTime | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.12 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current 2:00, 3:00, 4:00... = 200, 300, 400, etc. | |||||||||||||
| SsystemServicesEnableDST | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.13 | Enable | RW | ||||||||||
scalar · Enable · read-write · current This object enables and disables the DST. | |||||||||||||
| SsystemServicesWorkingDirectory | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.14 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This object contains the current file system working directory for this CMM. For example, /flash/certified | |||||||||||||
| SsystemServicesArg1 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.15 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 1st argument for system services action routines | |||||||||||||
| SsystemServicesArg2 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.16 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 2nd argument for system services action routines | |||||||||||||
| SsystemServicesArg3 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.17 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 3rd argument for system services action routines | |||||||||||||
| SsystemServicesArg4 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.18 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 4th argument for system services action routines | |||||||||||||
| SsystemServicesArg5 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.19 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 5th argument for system services action routines | |||||||||||||
| SsystemServicesArg6 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.20 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 6th argument for system services action routines | |||||||||||||
| SsystemServicesArg7 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.21 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 7th argument for system services action routines | |||||||||||||
| SsystemServicesArg8 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.22 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 8th argument for system services action routines | |||||||||||||
| SsystemServicesArg9 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.23 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current the 9th argument for system services action routines | |||||||||||||
| SsystemServicesAction | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object identifies which of the above Actions is to be performed by the System Services Application. Most Actions require one or more parameters be set before the Action is executed. systemServicesAction - 26 for bootrom, 27 for default miniboot, and 28 for backup miniboot use systemServicesArg1 for name of the file scp- the first 2 arguments are going to be used. Set arg 1 with the source and the arg 2 with the destination file(s). E.g. scp LocalDir/testfileX.txt [email protected]:RemoteDir/testfileX.txt For mount and umount, systemServicesArg1 specifies the mount point (such as /uflash). For newfs, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be created. On /uflash, a FAT16 file system is created with long name naming conventions. For fsck, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be checked and systemServicesArg2 will contain the string repair or no-repair depending on if autocorrection is requested. To see all file systems currently mounted, refer to the systemFileSystemTable. For backup and restore, systemServicesArg1 contains the archive name and systemServicesArg2 through Arg9 contains the directories and/or files to be archived/extracted. For newfs, fsck, backup and restore, the systemServicesActionPercentComplete variable can be inspected to see a progress indication.
| |||||||||||||
| SsystemServicesResultCode | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.25 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current the result of a system services application | |||||||||||||
| SsystemServicesResultString | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.26 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current the string result of a system services application | |||||||||||||
| SsystemServicesKtraceEnable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.27 | Enable | RW | obsolete | |||||||||
scalar · Enable · read-write · obsolete enables/disables the Ktrace facility | |||||||||||||
| SsystemServicesSystraceEnable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.28 | Enable | RW | obsolete | |||||||||
scalar · Enable · read-write · obsolete enables/disables the Systrace facility | |||||||||||||
| SsystemServicesTtyLines | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.29 | Unsigned32 (0..255) | RO | ||||||||||
scalar · Unsigned32 (0..255) · read-only · current the number of tty lines for a console screen | |||||||||||||
| SsystemServicesTtyColumns | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.30 | Unsigned32 (0..255) | RO | ||||||||||
scalar · Unsigned32 (0..255) · read-only · current the number of tty columns for a console screen | |||||||||||||
| SsystemServicesMemMonitorEnable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.31 | Enable | RW | ||||||||||
scalar · Enable · read-write · current disables/enables the kernel Memory Monitor feature | |||||||||||||
| TsystemServicesKtraceLevelTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32 | NA | obsolete | ||||||||||
table · not-accessible · obsolete the table of Ktrace severity level settings | |||||||||||||
| RsystemServicesKtraceLevelEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1 | NA | obsolete | ||||||||||
row · not-accessible · obsolete A row in the system services ktrace level table. There is one entry for each possible Application ID | |||||||||||||
| CsystemServicesKtraceLevelAppId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.1 | AppIdIndex | RO | obsolete | |||||||||
column · AppIdIndex · read-only · obsolete the index into the ktrace level table | |||||||||||||
| CsystemServicesKtraceLevel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.2 | SeverityLevel | RW | obsolete | |||||||||
column · SeverityLevel · read-write · obsolete the ktrace level for a specific Application ID | |||||||||||||
| TsystemServicesSystraceLevelTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33 | NA | obsolete | ||||||||||
table · not-accessible · obsolete the table of Systrace severity level settings | |||||||||||||
| RsystemServicesSystraceLevelEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1 | NA | obsolete | ||||||||||
row · not-accessible · obsolete A row in the system services systrace level table. There is one entry for each possible Application ID | |||||||||||||
| CsystemServicesSystraceLevelAppId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.1 | AppIdIndex | RO | obsolete | |||||||||
column · AppIdIndex · read-only · obsolete the Systrace level for a specific Application ID. | |||||||||||||
| CsystemServicesSystraceLevel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.2 | SeverityLevel | RW | obsolete | |||||||||
column · SeverityLevel · read-write · obsolete the Systrace level for a specific Application ID. | |||||||||||||
| TsystemUpdateStatusTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34 | NA | |||||||||||
table · not-accessible · current Provides update status for firmware updates | |||||||||||||
| RsystemUpdateStatusEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1 | NA | |||||||||||
| CsystemUpdateIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.1 | Integer32 (1..5972) | NA | ||||||||||
column · Integer32 (1..5972) · not-accessible · current The index to the CMM for which status is required. | |||||||||||||
| CsystemUpdateStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of a firmware update. In the case of doneNok, further information can be obtained from systemUpdateErrorCode.
| |||||||||||||
| CsystemUpdateErrorCode | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Error codes for done_nok.
| |||||||||||||
| SsystemServicesActionPercentComplete | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.35 | CommandPercentComplete | RO | ||||||||||
scalar · CommandPercentComplete · read-only · current This object identifies the percent completion of the currently executing systemServicesAction. | |||||||||||||
| SsystemServicesCurrentArchivePathName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.36 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This object identifies the archive currently being read via the systemServicesArchiveTable. This object is the complete pathname to the archive and must be set prior to reading the systemServicesArchiveTable. | |||||||||||||
| TsystemServicesArchiveTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37 | NA | |||||||||||
table · not-accessible · current This table contains the contents of a backup archive. This table is used by the restore action command to display (rather than backup) an archive. The restore command will populate this table with archive information read from the archive specified by the systemServicesAction restore command. This is done as follows. Set the systemServicesArg1 object to the archive name to be read. Set the systemServicesArg2 object to the string: display-only. Set the systemServicesAction object to restore. Then read this table. | |||||||||||||
| RsystemServicesArchiveEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1 | NA | |||||||||||
row · not-accessible · current A row in the system services archive table. | |||||||||||||
| CsystemServicesArchiveIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Index to a specific entry in the backup archive file. | |||||||||||||
| CsystemServicesArchiveName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.2 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The name of a file in the backup archive file. | |||||||||||||
| CsystemServicesArchiveType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.3 | SystemFileType | RO | ||||||||||
column · SystemFileType · read-only · current The type of a file in the backup archive file. | |||||||||||||
| CsystemServicesArchiveSize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The size of a file in the backup archive file. | |||||||||||||
| CsystemServicesArchiveAttr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The attributes of a file in the backup archive file.
| |||||||||||||
| SsystemServicesUsbEnable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.38 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current disable/enable the USB interface with mode as synchronous / asynchronous
| |||||||||||||
| SsystemServicesUsbAutoCopyEnable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.39 | Enable | RW | ||||||||||
scalar · Enable · read-write · current disable/enable the USB auto-copy facility | |||||||||||||
| SsystemServicesUsbMounted | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.40 | Enable | RO | ||||||||||
scalar · Enable · read-only · current determinse if usb is mounted | |||||||||||||
| SsystemServicesTcpHalfOpenTimeout | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.41 | Integer32 (3..63) | RW | ||||||||||
scalar · Integer32 (3..63) · read-write · current The timeout value in seconds for tcp half-open connections. Current suppored values are 3, 7, 15, 31 and 63(default) | |||||||||||||
| SsystemServicesUsbBackupAdminState | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.42 | Enable | RW | ||||||||||
scalar · Enable · read-write · current This object enables and disables usb backup admin-state . | |||||||||||||
| SsystemServicesUsbCopyConfig | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.43 | Enable | RW | ||||||||||
scalar · Enable · read-write · current This object enables and disables usb copy-config . | |||||||||||||
| SsystemServicesUsbBackupKey | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.44 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The key entered by the user which will be used for encrypting files that will be backed up to USB. | |||||||||||||
| SsystemServicesUsbBackupHashkey | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.45 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The encrypted key entered by the user which will be used for encrypted files that will be backed up to USB. | |||||||||||||
| SsystemServicesTCPTimeStampResponse | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.46 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable TCP time-stamp-response. | |||||||||||||
| SsystemServicesUsbBackupBootable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.47 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/Disable enhanced USB backup for bootable USB drive | |||||||||||||
| NsystemSwitchLogging | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6 | ||||||||||||
| SsystemSwitchLoggingIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.1 | SwitchLoggingIndex | RO | ||||||||||
scalar · SwitchLoggingIndex · read-only · current A small positive integer used to identify a switch logging output | |||||||||||||
| SsystemSwitchLoggingEnable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.2 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Global switch logging enable/disable | |||||||||||||
| SsystemSwitchLoggingFlash | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.3 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging to flash | |||||||||||||
| SsystemSwitchLoggingSocket | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.4 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging to a socket | |||||||||||||
| SsystemSwitchLoggingSocketIpAddr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.5 | IpAddress | RW | deprecated | |||||||||
scalar · IpAddress · read-write · deprecated The IP Address of a remote host that can be used to send switch logging records to as an option | |||||||||||||
| SsystemSwitchLoggingConsole | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.6 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging to the console | |||||||||||||
| TsystemSwitchLoggingApplicationTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7 | NA | |||||||||||
table · not-accessible · current The table of switch logging registered applications,one for each Application ID | |||||||||||||
| RsystemSwitchLoggingLevelEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1 | NA | |||||||||||
row · not-accessible · current A row in the system switch logging application table | |||||||||||||
| CsystemSwitchLoggingApplicationAppId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.1 | AppIdIndex | RO | ||||||||||
column · AppIdIndex · read-only · current A specific application ID which has a registered application
associated with it. This application ID is used as an index
into the application table. | |||||||||||||
| CsystemSwitchLoggingApplicationSubAppId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.2 | AppIdIndex | RO | ||||||||||
column · AppIdIndex · read-only · current A specific sub-application ID which belongs to a registered application associated with it. This sub-application ID is used as part of the index into the application table. | |||||||||||||
| CsystemSwitchLoggingApplicationSubAppVrfLevelIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.3 | Integer32 (0..9) | RO | ||||||||||
column · Integer32 (0..9) · read-only · current The specific sub-application's VRF severity level. This severity level is used as part of the index into the application table. | |||||||||||||
| CsystemSwitchLoggingApplicationAppName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.4 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current Application name in an entry in the table | |||||||||||||
| CsystemSwitchLoggingApplicationSubAppName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.5 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The name of the specific sub-application ID. | |||||||||||||
| CsystemSwitchLoggingApplicationSubAppLevel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.6 | SeverityLevel | RO | ||||||||||
column · SeverityLevel · read-only · current The severity level of the specific sub-application ID. | |||||||||||||
| CsystemSwitchLoggingApplicationSubAppVrfLevelString | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.7 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current A string with comma-delimited VRF IDs or ranges of VRF IDs that belong to this sub-application's VRF severity level. | |||||||||||||
| SsystemSwitchLoggingClear | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.8 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Enable clearing of switch logging entries | |||||||||||||
| SsystemSwitchLoggingFileSize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.9 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Set size of swlog logging file | |||||||||||||
| TsystemSwitchLoggingHostTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10 | NA | |||||||||||
table · not-accessible · current The table of switch logging remote hosts. | |||||||||||||
| RsystemSwitchLoggingHostEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1 | NA | |||||||||||
row · not-accessible · current A remote switch logging server entry. | |||||||||||||
| CsystemSwitchLoggingHostIpAddr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.1 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The IP Address of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostPort | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.2 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current The port number of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Provides the ability to add or remove a remote host entry. | |||||||||||||
| CsystemSwitchLoggingHostUserCommandHost | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.4 | Enable | RC | ||||||||||
column · Enable · read-create · current Indicates whether this host may receive user command data. | |||||||||||||
| CsystemSwitchLoggingHostVrfName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.5 | SnmpAdminString (SIZE (0..32)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-create · current The name or number of the VRF to be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostTls | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object is used to enable syslog over TLS.
| |||||||||||||
| TsystemSwitchLoggingHostv6Table | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11 | NA | |||||||||||
table · not-accessible · current The table of switch logging remote hosts. | |||||||||||||
| RsystemSwitchLoggingHostv6Entry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1 | NA | |||||||||||
row · not-accessible · current A remote switch logging server entry. | |||||||||||||
| CsystemSwitchLoggingHostv6IpAddr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.1 | Ipv6Address | RO | ||||||||||
column · Ipv6Address · read-only · current The IP Address of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostv6Port | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.2 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current The port number of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostv6Status | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Provides the ability to add or remove a remote host entry. | |||||||||||||
| CsystemSwitchLoggingHostv6UserCommandHost | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.4 | Enable | RC | ||||||||||
column · Enable · read-create · current Indicates whether this host may receive user command data. | |||||||||||||
| CsystemSwitchLoggingHostv6VrfName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.5 | SnmpAdminString (SIZE (0..32)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-create · current The name or number of the VRF to be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostv6Tls | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object is used to enable syslog over TLS.
| |||||||||||||
| SsystemSwitchLoggingHostCount | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.12 | Integer32 (0..4) | RO | ||||||||||
scalar · Integer32 (0..4) · read-only · current The number of remote hosts currently defined. | |||||||||||||
| SsystemSwitchLoggingConsoleLevel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.13 | SeverityLevel | RC | ||||||||||
scalar · SeverityLevel · read-create · current Messages whose severity level is equal to or more severe than this value will be displayed to the console. | |||||||||||||
| SsystemSwitchLoggingUserCommandStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.14 | Enable | RC | ||||||||||
scalar · Enable · read-create · current User commands will be logged to remote hosts when enabled. | |||||||||||||
| SsystemSwitchLoggingSysLogFacilityId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.15 | SysLogFacilityId | RW | ||||||||||
scalar · SysLogFacilityId · read-write · current This textual convention enumerates the facilities that originate syslog messages. The Facilities of syslog messages are numerically coded with decimal values. Some of the operating system daemons and processes are traditionally designated by the Facility values given below. Daemons and processes that do not have an explicitly assigned Facility may use any of the 'local use' Facilities or they may use the 'user-level' Facility. For interoperability and backwards compatibility reasons, mapping specified in this document between a label which represents a Facility and the value which represents the corresponding code, is normative. So the mapping from a label configured by operators in syslog.conf or equivalent will consistently map to the same Facility code regardless of implementation, but the label itself is often semantically meaningless, because it is impractical to attempt to enumerate all possible facilities, and the enumeration (label and corresponding value) that is used by an actual Facility is, and has historically been, implementation-dependent. For example, the foobar application might log messages as having come from local7, even though there is no 'local' process on the device, and the operator can configure syslog.conf to have local7.critical messages be relayed, even though there might be multiple facilities using Facility local7. This is typical current practice, and originators, relays and collectors know how to handle this situation. For improved accuracy, the foobar application can also include an APPNAME Structured Data Element. | |||||||||||||
| SsystemSwitchLoggingLevel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.16 | SeverityLevel | RW | ||||||||||
scalar · SeverityLevel · read-write · current The logging level for a specific application id. | |||||||||||||
| SsystemSwitchLoggingAppName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.17 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Application name used as an index into the table | |||||||||||||
| SsystemSwitchLoggingDuplicateDetect | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.18 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Global switch logging enable/disable duplicate detection | |||||||||||||
| SsystemSwitchLoggingPreamble | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.19 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Global switch logging enable/disable printing preamble | |||||||||||||
| SsystemSwitchLoggingDebug | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.20 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Global switch logging enable/disable debug information | |||||||||||||
| SsystemSwitchLoggingVrf | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.21 | VrfId | RW | ||||||||||
scalar · VrfId · read-write · current Global switch logging subapplicastion VRF ID | |||||||||||||
| SsystemSwitchLoggingHashAgeLimit | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.22 | AgeLimit | RW | ||||||||||
scalar · AgeLimit · read-write · current Global switch logging Hash Table Age Limit | |||||||||||||
| SsystemSwitchLoggingTty | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.23 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging to tty | |||||||||||||
| SsystemSwitchLoggingSubAppNbr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.24 | AppIdIndex | RW | ||||||||||
scalar · AppIdIndex · read-write · current The subapplication number of a given application | |||||||||||||
| SsystemSwitchLoggingLibraryName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.25 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Library name used as an index into the table of registered libraries | |||||||||||||
| SsystemSwitchLoggingLoopback0 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.26 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging using Loopback0 interface as the source ip address when logging to syslog server | |||||||||||||
| TsystemSwitchLoggingDgHostTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27 | NA | |||||||||||
table · not-accessible · current The table of switch logging remote hosts for Dying Gasp. | |||||||||||||
| RsystemSwitchLoggingDgHostEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1 | NA | |||||||||||
row · not-accessible · current A remote switch logging server entry. | |||||||||||||
| CsystemSwitchLoggingDgHostIndex | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1.1 | Integer32 (1..3) | NA | ||||||||||
column · Integer32 (1..3) · not-accessible · current Index of Dying Gasp swlod table. | |||||||||||||
| CsystemSwitchLoggingDgHostIpType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1.2 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current The IP address type . | |||||||||||||
| CsystemSwitchLoggingDgHostIpAddr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.27.1.3 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The IP Address of a remote host that can be used to send Dying Gasp switch logging records to. | |||||||||||||
| SsystemSwitchLoggingGmtTime | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.28 | Enable | RW | deprecated | |||||||||
scalar · Enable · read-write · deprecated Enable/disable switch logging in GMT time when logging to syslog server | |||||||||||||
| SsystemSwitchLoggingSyslogProtocol | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.29 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging in syslog-protocol RFC5424 format when logging to file or syslog server. | |||||||||||||
| SsystemSwitchLoggingSizeTrapThreshold | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.30 | Integer32 (50..90) | RW | ||||||||||
scalar · Integer32 (50..90) · read-write · current when the swlog file size reaches this threshold, the trap 'systemSwlogSizeTrap' will be generated. | |||||||||||||
| TsystemSwitchLoggingHostDnTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31 | NA | |||||||||||
table · not-accessible · current The table of switch logging remote hosts. | |||||||||||||
| RsystemSwitchLoggingHostDnEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1 | NA | |||||||||||
row · not-accessible · current A remote switch logging server domain name entry. The MAX size available for systemSwitchLoggingHostDnName is 127 because the table index cannot exceed MAX 128 dotted values. | |||||||||||||
| CsystemSwitchLoggingHostDnName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.1 | SnmpAdminString (SIZE (1..128)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..128)) · not-accessible · current The domain name of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostDnPort | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.2 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current The port number of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostDnUserCommandHost | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.3 | Enable | RC | ||||||||||
column · Enable · read-create · current Indicates whether this host may receive user command data. | |||||||||||||
| CsystemSwitchLoggingHostDnVrfName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.4 | SnmpAdminString (SIZE (0..32)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-create · current The name or number of the VRF to be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostDnStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Provides the ability to add or remove a remote host entry. | |||||||||||||
| CsystemSwitchLoggingHostDnTls | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.31.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This object is used to enable syslog over TLS.
| |||||||||||||
| SsystemSwitchLoggingHostOutputSocket | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.32 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable host logging to external syslog server. | |||||||||||||
| TsystemSwitchLoggingNiOutputSocketTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33 | NA | |||||||||||
table · not-accessible · current The table of NI output socket | |||||||||||||
| RsystemSwitchLoggingNiOutputSocketEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1 | NA | |||||||||||
row · not-accessible · current A row in the NI output socket table. | |||||||||||||
| CsystemSwitchLoggingNiOutputSocketChassisId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The chassis ID for NI output socket. | |||||||||||||
| CsystemSwitchLoggingNiOutputSocketSlot | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1.2 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The slot ID for NI output socket. | |||||||||||||
| CsystemSwitchLoggingNiOutputSocket | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.33.1.3 | Enable | RW | ||||||||||
column · Enable · read-write · current Enable/disable NI logging to external syslog server. | |||||||||||||
| SsystemSwitchLoggingOutputSocketConsole | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.34 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable send console log to remote Syslog server. | |||||||||||||
| SsystemSwitchLoggingDefaultLevel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.35 | SeverityLevel | RW | ||||||||||
scalar · SeverityLevel · read-write · current Switch logging default level.
| |||||||||||||
| NsystemDNS | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7 | ||||||||||||
| SsystemDNSEnableDnsResolver | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.1 | Enable | RC | ||||||||||
scalar · Enable · read-create · current Global Domain Name Service enable/disable | |||||||||||||
| SsystemDNSDomainName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.2 | SnmpAdminString (SIZE (0..255)) | RC | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-create · current current domain name used by the Domain Name Service | |||||||||||||
| SsystemDNSNsAddr1 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.3 | IpAddress | RC | ||||||||||
scalar · IpAddress · read-create · current 1st part of address used by the Domain Name Service | |||||||||||||
| SsystemDNSNsAddr2 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.4 | IpAddress | RC | ||||||||||
scalar · IpAddress · read-create · current 2nd part of address used by the Domain Name Service | |||||||||||||
| SsystemDNSNsAddr3 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.5 | IpAddress | RC | ||||||||||
scalar · IpAddress · read-create · current 3rd part of address used by the Domain Name Service | |||||||||||||
| SsystemDNSNsIPv6Addr1 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.6 | Ipv6Address | RC | ||||||||||
scalar · Ipv6Address · read-create · current IPv6 address of the Primary DNS server | |||||||||||||
| SsystemDNSNsIPv6Addr2 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.7 | Ipv6Address | RC | ||||||||||
scalar · Ipv6Address · read-create · current IPv6 address of the Secondary DNS server | |||||||||||||
| SsystemDNSNsIPv6Addr3 | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.8 | Ipv6Address | RC | ||||||||||
scalar · Ipv6Address · read-create · current IPv6 address of the third DNS server | |||||||||||||
| NsystemBlueToothServices | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8 | ||||||||||||
| SsystemServicesBluetoothEnable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.1 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable or disable Bluetooth. | |||||||||||||
| SsystemServicesBluetoothTxPower | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The Bluetooth transmit power, low or high.
| |||||||||||||
| TsystemServicesBluetoothTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3 | NA | |||||||||||
table · not-accessible · current The table of Bluetooth devices. | |||||||||||||
| RsystemServicesBluetoothEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3.1 | NA | |||||||||||
| CsystemServicesBluetoothChassisId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3.1.1 | VirtualOperChassisId | NA | ||||||||||
column · VirtualOperChassisId · not-accessible · current The chassis ID for this Bluetooth instance. | |||||||||||||
| CsystemServicesBluetoothStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.8.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current Bluetooth status.
| |||||||||||||
| NsystemFips | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.9 | ||||||||||||
| SsystemFipsAdminState | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.9.1 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable or disable the FIPS mode on AOS switches. This value becomes the systemFipsOperState after write-memory and reboot. | |||||||||||||
| SsystemFipsOperState | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.9.2 | Enable | RO | ||||||||||
scalar · Enable · read-only · current The Operational State of the FIPS mode on AOS switches | |||||||||||||
| NsystemVcHardware | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10 | ||||||||||||
| TsystemVcHardwareTable | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1 | NA | |||||||||||
table · not-accessible · current The table lists the results of cable diagnostics. | |||||||||||||
| RsystemVcHardwareEntry | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1 | NA | |||||||||||
| CsystemVcHardwareCpuVendor | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.1 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the CPU Vendor for this chassis in the VC. | |||||||||||||
| CsystemVcHardwareCpuModel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.2 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the CPU Model for this chassis in the VC. | |||||||||||||
| CsystemVcHardwareFlashMfg | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object identifies the manufacturer of the Flash memory used on this chassis in the VC.
| |||||||||||||
| CsystemVcHardwareFlashSize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object identifies the size of the flash memory available on this chassis in the VC. | |||||||||||||
| CsystemVcHardwareMemoryMfg | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object identifies the manufacturer of the RAM memory used on this chassis in the VC
| |||||||||||||
| CsystemVcHardwareMemorySize | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object identifies the size of the RAM memory available on this chassis in the VC | |||||||||||||
| CsystemVcHardwareUbootVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.7 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current A string that identifies the Uboot version for this chassis in the VC. | |||||||||||||
| CsystemVcHardwareFpga1Version | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.8 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current This is the version of one of the FPGA #1 this CMM in the VC. | |||||||||||||
| CsystemVcHardwareFpga2Version | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.9 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current This is the version of one of the FPGA #2 this CMM in the VC. If this FPGA does not exist then this will be N/A | |||||||||||||
| CsystemVcHardwarePowerSuppliesPresent | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.10 | Bits | RO | ||||||||||
column · Bits · read-only · current A List of the Power supplies that are Present
| |||||||||||||
| CsystemVcHardwareNisPresent | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.11 | Bits | RO | ||||||||||
column · Bits · read-only · current A List of the NI's/Expansion modules Present
| |||||||||||||
| CsystemVcHardwareCFMsPresent | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.12 | Bits | RO | ||||||||||
column · Bits · read-only · current A List of the CFM's that are Present
| |||||||||||||
| CsystemVcHardwareFanTraysPresent | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.10.1.1.13 | Bits | RO | ||||||||||
column · Bits · read-only · current A List of the Fan Trays Present
| |||||||||||||
| NovCloudAgent | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11 | ||||||||||||
| SovCloudAgentAdminState | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable the cloud agent on AOS switches.
| |||||||||||||
| SovCloudAgentDiscoveryInterval | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.2 | Unsigned32 (2..43200) | RW | ||||||||||
scalar · Unsigned32 (2..43200) · read-write · current Time interval in minutes the switch does call-home in case of the previous call-home failed. | |||||||||||||
| SovCloudAgentDeviceState | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The AOS switch OV cloud agent state.
| |||||||||||||
| SovCloudAgentVpnStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The AOS switch OV cloud agent VPN connection status.
| |||||||||||||
| SovCloudAgentTimeToNextCallhome | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.5 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Time in second to the next callhome in case the previous callhome is failed. Zero (0) value means it is not applicable. | |||||||||||||
| SovCloudAgentRemoveInconsistentCertificate | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.11.6 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Remove the certificates from all chassis if the certificate status is inconsistent. | |||||||||||||
| NsystemStorage | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.12 | ||||||||||||
| SsystemStorageLock | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.12.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The storage system status. By default, the storage system is un-locked.
| |||||||||||||
| SsystemStorageExtractOperStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.12.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object denotes the status of the last extraction operation.
| |||||||||||||
| NsystemStorageLockSftpServer | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13 | ||||||||||||
| SsystemStorageLockSftpServerInetAddrType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.1 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value of systemStorageLockSftpServerInetAddrType indicates the inet address type for systemStorageLockSftpServerInetAddr.
| |||||||||||||
| SsystemStorageLockSftpServerInetAddr | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.2 | InetAddress (SIZE (1..128)) | RW | ||||||||||
scalar · InetAddress (SIZE (1..128)) · read-write · current IP address of the sftp server. | |||||||||||||
| SsystemStorageLockSftpServerUser | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.3 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Name of the user. | |||||||||||||
| SsystemStorageLockSftpServerPass | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.4 | SnmpAdminString (SIZE (0..47)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..47)) · read-write · current Password of the user. | |||||||||||||
| SsystemStorageLockSftpServerPassHash | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.5 | SnmpAdminString (SIZE (0..96)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..96)) · read-write · current Password hash of the user. | |||||||||||||
| SsystemStorageLockSftpServerPort | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.13.6 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current Port of the sftp server. | |||||||||||||
| NsystemStorageLockOutputFile | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14 | ||||||||||||
| SsystemStorageLockOutputFileName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.1 | SnmpAdminString (SIZE (1..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (1..128)) · read-write · current Name of the output file. | |||||||||||||
| SsystemStorageLockOutputFileChassisId | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.2 | Integer32 (1..8) | RW | ||||||||||
scalar · Integer32 (1..8) · read-write · current The storage lock chassis id. | |||||||||||||
| SsystemStorageLockOutputFileType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The storage lock type.
| |||||||||||||
| SsystemStorageLockOutputFileAdminPass | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.14.4 | SnmpAdminString (SIZE (0..47)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..47)) · read-write · current Password of the admin user. | |||||||||||||
| NsystemSslCipher | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.15 | ||||||||||||
| SsystemSslCipherLevel | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.15.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The strength of the cipher and indicates the minimum level of ciphers that are supported. all-Includes all ciphers, including NULL-SHA. low-Includes all ciphers except NULL-SHA. medium-Includes all ciphers except NULL-SHA, DES-CBC-SHA, and RC4-MD5. high (applies only to TLSv1.2)-Includes only AES-256 with SHA-2 ciphers. custom-The cipher suite using OpenSSL cipher definition strings. customFile-The cipher suite using OpenSSL cipher definition strings that are stored in the specified file.
| |||||||||||||
| SsystemSslCipherSuite | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.15.2 | SnmpAdminString (SIZE (0..1024)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..1024)) · read-write · current Full control of the cipher suite using OpenSSL cipher definition strings. | |||||||||||||
| NsystemMgmtAgent | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16 | ||||||||||||
| SsystemMgmtAgentAdminState | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable the MGMT agent on AOS switches.
| |||||||||||||
| SsystemMgmtAgentBrokerConfHostType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.2 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current Type of broker. It should be DNS, IPv4 and IPv6.
| |||||||||||||
| SsystemMgmtAgentBrokerConfHost | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.3 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Specify the broker host to connect to. | |||||||||||||
| SsystemMgmtAgentBrokerConfPort | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.4 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Connect to the port specified. If not given, the default of 1883 for plain MQTT or 8883 for MQTT over TLS will be used. | |||||||||||||
| SsystemMgmtAgentBrokerConfUserName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.5 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Provide a username to be used for authenticating with the broker. | |||||||||||||
| SsystemMgmtAgentBrokerConfPassword | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.6 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Provide a password to be used for authenticating with the broker. | |||||||||||||
| SsystemMgmtAgentBrokerConfQoS | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specify the quality of service to use for the message, from 0, 1 and 2.
| |||||||||||||
| SsystemMgmtAgentBrokerConfKeepAlive | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.8 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The number of seconds between sending PING commands to the broker for the purposes of informing it we are still connected and functioning. | |||||||||||||
| SsystemMgmtAgentBrokerConfCleanSession | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.9 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enable or disable the clean session flag. | |||||||||||||
| SsystemMgmtAgentBrokerConfProxy | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.10 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Specify a SOCKS5 proxy to connect through. | |||||||||||||
| SsystemMgmtAgentBrokerConfInsecure | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.11 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current When using certificate based encryption, this option disables verification of the server hostname in the server certificate. | |||||||||||||
| SsystemMgmtAgentBrokerOperHostType | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.12 | InetAddressType | RO | ||||||||||
scalar · InetAddressType · read-only · current Type of broker. It should be DNS, IPv4 and IPv6.
| |||||||||||||
| SsystemMgmtAgentBrokerOperHost | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.13 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current Specify the broker host to connect to. | |||||||||||||
| SsystemMgmtAgentBrokerOperPort | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.14 | Integer32 (1..65535) | RO | ||||||||||
scalar · Integer32 (1..65535) · read-only · current Connect to the port specified. If not given, the default of 1883 for plain MQTT or 8883 for MQTT over TLS will be used. | |||||||||||||
| SsystemMgmtAgentBrokerOperUserName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.15 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current Provide a username to be used for authenticating with the broker. | |||||||||||||
| SsystemMgmtAgentBrokerOperPassword | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.16 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current Provide a password to be used for authenticating with the broker. | |||||||||||||
| SsystemMgmtAgentBrokerOperQoS | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.17 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Specify the quality of service to use for the message, from 0, 1 and 2.
| |||||||||||||
| SsystemMgmtAgentBrokerOperKeepAlive | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.18 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of seconds between sending PING commands to the broker for the purposes of informing it we are still connected and functioning. | |||||||||||||
| SsystemMgmtAgentBrokerOperCleanSession | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.19 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current Enable or disable the clean session flag. | |||||||||||||
| SsystemMgmtAgentBrokerOperProxy | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.20 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Specify a SOCKS5 proxy to connect through. | |||||||||||||
| SsystemMgmtAgentBrokerOperInsecure | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.16.21 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current When using certificate based encryption, this option disables verification of the server hostname in the server certificate. | |||||||||||||
| NsystemSslPki | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17 | ||||||||||||
| SsystemSslPkiClientCertificateValidation | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used for enabling/disabling the SSL certificate validation for AOS TLS clients ( LDAP, RADIUS, SYSLOG, SNMP ).
| |||||||||||||
| SsystemSslPkiClientMutualAuthentication | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used for enabling/disabling the SSL mutual authentication for AOS TLS clients ( LDAP, RADIUS, SYSLOG, SNMP ).
| |||||||||||||
| SsystemSslPkiServerMutualAuthentication | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used for enabling/disabling the SSL mutual authentication for AOS TLS servers ( Captive-Portal, SNMP ).
| |||||||||||||
| SsystemSslPkiTlsVersion | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used for selecting the TLS version for AOS TLS.
| |||||||||||||
| SsystemSslPkiCheckRevocation | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.17.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used to set the TLS certificate revocation check method.
| |||||||||||||
| NsystemPythonPip | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.18 | ||||||||||||
| SsystemPythonPipInstall | 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.18.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current A set with value 1 on this object will install python pip module to the switch. A set with value 2 on this object will uninstall python pip module but a reboot is required.
| |||||||||||||
| NalcatelIND1SystemMIBConformance | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Conformance Information. | |||||||||||||
| NalcatelIND1SystemMIBGroups | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Units Of Conformance. | |||||||||||||
| GsystemMicrocodeGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.1 | ||||||||||||
group · current Group all the system microcode objects together
| |||||||||||||
| GsystemBootParamsGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.2 | ||||||||||||
group · current Group all the system boot parameters together | |||||||||||||
| GsystemHardwareGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.3 | ||||||||||||
group · current Group all the system Hardware Data together
| |||||||||||||
| GsystemServicesGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.4 | ||||||||||||
group · current Group all the system services parameters together
| |||||||||||||
| GsystemFileSystemGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.5 | ||||||||||||
group · current Group all the system flash file parameters together
| |||||||||||||
| GsystemSwitchLoggingGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.6 | ||||||||||||
group · current Group all the switch logging parameters together
| |||||||||||||
| GsystemDNSGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.7 | ||||||||||||
group · current Group all the systemDNS parameters together | |||||||||||||
| GsystemBlueToothServicesGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.8 | ||||||||||||
group · current Group all the systemFips parameters together | |||||||||||||
| GsystemFipsGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.9 | ||||||||||||
group · current Group all the systemFips parameters together | |||||||||||||
| GsystemVcHardwareGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.10 | ||||||||||||
group · current Group all the system VC Hardware Data together
| |||||||||||||
| GsystemSwlogGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.11 | ||||||||||||
group · current Group all the swlog trap objects together | |||||||||||||
| GsystemNotificationGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.12 | ||||||||||||
group · current A collection of notifications for System Services events. | |||||||||||||
| GovCloudAgentGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.13 | ||||||||||||
group · current Group all the ovCloudAgent parameters together. | |||||||||||||
| GsystemStorageGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.14 | ||||||||||||
group · current Group all the systemStorage parameters together. | |||||||||||||
| GsystemStorageLockSftpServerGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.15 | ||||||||||||
group · current Group all the systemStorageLockSftpServer parameters together. | |||||||||||||
| GsystemStorageLockOutputFileGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.16 | ||||||||||||
group · current Group all the systemStorageLockOutputFile parameters together. | |||||||||||||
| GsystemStorageLockingGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.17 | ||||||||||||
| GsystemSslCipherGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.18 | ||||||||||||
group · current Collection of objects for SSL ciphers. | |||||||||||||
| GsystemMgmtAgentGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.19 | ||||||||||||
group · current Group all the MGMT agent parameters together.
| |||||||||||||
| GsystemSslPkiGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.20 | ||||||||||||
group · current Collection of objects for SSL PKI. | |||||||||||||
| GsystemPythonPipGroup | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.21 | ||||||||||||
| NalcatelIND1SystemMIBCompliances | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.2 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Compliance Statements. | |||||||||||||
| MalcatelIND1SystemMIBCompliance | 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.2.1 | ||||||||||||
compliance · current Compliance statement for Alcatel BOP Proprietary System Subsystem.
| |||||||||||||
| NalcatelIND1SystemMIBTrapObjects | 1.3.6.1.4.1.6486.801.1.1.1.2.1.3 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Trap Objects. | |||||||||||||
| SsystemSwlogName | 1.3.6.1.4.1.6486.801.1.1.1.2.1.3.1 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current SWLOG file name that might get overwritten since swlog file reached (90%) it size | |||||||||||||
| SsystemSwlogFailure | 1.3.6.1.4.1.6486.801.1.1.1.2.1.3.2 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current SWLOG to /flash/swlog_chasis* file may fail due to the switch runs out of file descriptor or hard disk space. This trap will also be raised during failure sending the swlog to external syslog server. | |||||||||||||
| SsystemRebootReason | 1.3.6.1.4.1.6486.801.1.1.1.2.1.3.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object indicates the system reboot reason. If this object value is swlogFailure(1) that means system reboot due to remote logging failure. If this object value is loggingServiceNotRunning(2) that means system reboot because syslogd/swlogd is not running.
| |||||||||||||
| SsystemStorageLockStatus | 1.3.6.1.4.1.6486.801.1.1.1.2.1.3.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object indicates the system storage lock status.
| |||||||||||||
| SswlogdRestart | 1.3.6.1.4.1.6486.801.1.1.1.2.1.3.5 | SnmpAdminString (SIZE (1..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (1..255)) · read-only · current This trap is sent when swlogd/syslogd is restarted | |||||||||||||
| NalcatelIND1SystemMIBTraps | 1.3.6.1.4.1.6486.801.1.1.1.2.1.4 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Trap Information. | |||||||||||||
| !systemSwlogSizeTrap | 1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.1 | ||||||||||||
notification · current The file specified file may get lost if not backed up , since swlog file reached 90% of its size , please back up swlog before getting overwritten.
| |||||||||||||
| !systemSwlogFailureTraps | 1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.2 | ||||||||||||
notification · current when swlog fails to store log message to /flash/swlog_chassis* file, then this trap is sent to the Management Entity, with the message which was failed to persist. This trap will also be raised during failure sending the swlog to external syslog server.
| |||||||||||||
| !systemRebootSwlogFailureTrap | 1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.3 | ||||||||||||
notification · current When swlog fails to send log message to remote server or log service is not running, the system need to be rebooted. This trap is sent to the management entity to indicate the reboot reason.
| |||||||||||||
| !systemStorageLockTrap | 1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.4 | ||||||||||||
notification · current When system storage is locked or unlocked, this trap is sent to management entity to indicate the storage lock status.
| |||||||||||||
| !swlogdRestartTrap | 1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.5 | ||||||||||||
notification · current When swlogd/syslogd is restarted, this trap is sent as an indication.
| |||||||||||||
Textual conventions
AgeLimitInteger32 (1..64)Time Limit for switch log hash table entries
AppIdIndexInteger32 (0..254)a small positive integer used to index into tables arranged by Application ID's.
CommandPercentCompleteInteger32 (0..100)An indication of percent complete for a command.
EnableINTEGERdisabled(2)enabled(1)an enumerated value used to indicate whether an entity is enabled(1), or disabled(2)
FileSystemIndexINTEGERflash(1)uflash(2)an enumerated value which provides an indication of the file system. The value is a small positive integer indicating the type of the file system
SeverityLevelINTEGERseverityLevelAlarm(1)severityLevelAlert(3)severityLevelDbg1(7)severityLevelDbg2(8)severityLevelDbg3(9)severityLevelError(2)severityLevelEvent(5)severityLevelInfo(6)severityLevelOff(0)severityLevelWarn(4)an enumerated value which provides an indication of the severity level used for logging and debug purposes. The value is a small integer.
SwitchLoggingIndexINTEGERconsole(1)flash(2)ipaddr(4)socket(3)a small positive integer used to identify switch logging outputs
SysLogFacilityIdINTEGERclock1(23)clock2(22)ftp(21)kernel(20)local0(19)local1(18)local2(17)local3(16)local4(15)local5(14)local6(13)local7(12)logAlert(11)logAudit(10)lptr(9)mail(8)netNews(7)ntp(6)secAuth1(5)secAuth2(4)syslog(3)system(2)user(1)uucp(0)SystemFileTypeINTEGERdirectory(2)file(1)tarArchive(4)undefined(3)a small positive integer used to identify file types
VrfIdInteger32 (1..64)Switch Log Vrf ID
Traps / Notifications
- swlogdRestartTrap
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.5 - systemRebootSwlogFailureTrap
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.3 - systemStorageLockTrap
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.4 - systemSwlogFailureTraps
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.2 - systemSwlogSizeTrap
1.3.6.1.4.1.6486.801.1.1.1.2.1.4.0.1
Groups and compliance
- alcatelIND1SystemMIBCompliance
- ovCloudAgentGroup
- systemBlueToothServicesGroup
- systemBootParamsGroup
- systemDNSGroup
- systemFileSystemGroup
- systemFipsGroup
- systemHardwareGroup
- systemMgmtAgentGroup
- systemMicrocodeGroup
- systemNotificationGroup
- systemPythonPipGroup
- systemServicesGroup
- systemSslCipherGroup
- systemSslPkiGroup
- systemStorageGroup
- systemStorageLockOutputFileGroup
- systemStorageLockSftpServerGroup
- systemStorageLockingGroup
- systemSwitchLoggingGroup
- systemSwlogGroup
- systemVcHardwareGroup