ALCATEL-IND1-SESSION-MGR-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
User Sessions Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-SESSION-MGR-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-SESSION-MGR-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.7.1Imports
| ALCATEL-IND1-BASE | softentIND1Sesmgr |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1SessionMgrMIB | 1.3.6.1.4.1.6486.801.1.2.1.7.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
User Sessions Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1SessionMgrMIBNotifications | 1.3.6.1.4.1.6486.801.1.2.1.7.1.0 | |||
node · current Branch For Session manager MIB Subsystem Notifications. | ||||
| !sessionAuthenticationTrap | 1.3.6.1.4.1.6486.801.1.2.1.7.1.0.1 | |||
notification · current Authentication Failure Trap is sent each time a user authentication is refused. | ||||
| !sessionAuthenticationSuccessTrap | 1.3.6.1.4.1.6486.801.1.2.1.7.1.0.2 | |||
notification · current Authentication Success Trap is sent each time a user authentication is accepted. | ||||
| !sessionResetToFactoryTrap | 1.3.6.1.4.1.6486.801.1.2.1.7.1.0.3 | |||
notification · current Trap to notify the reset to factory. | ||||
| NalcatelIND1SessionMgrMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1 | |||
node · current Branch For Session Manager Subsystem Managed Objects. | ||||
| NsessionMgr | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1 | |||
| TsessionConfigTable | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1 | NA | ||
table · not-accessible · current The configuration parameters of a user session. | ||||
| RsessionConfigEntry | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1 | NA | ||
| CsessionType | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the session interface.
| ||||
| CsessionBannerFileName | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.2 | SnmpAdminString (SIZE (0..255)) | RW | |
column · SnmpAdminString (SIZE (0..255)) · read-write · current Optional Banner File Name. For CLI, HTTP, and FTP sessions only. | ||||
| CsessionInactivityTimerValue | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.3 | Integer32 (1..596523) | RW | |
column · Integer32 (1..596523) · read-write · current The inactivity timer value for this type of session, in minutes. | ||||
| CsessionDefaultPromptString | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.4 | SnmpAdminString (SIZE (0..31)) | RW | |
column · SnmpAdminString (SIZE (0..31)) · read-write · current Prompt string. For CLI sessions only. | ||||
| TsessionActiveTable | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2 | NA | ||
table · not-accessible · current A list of active users sessions. | ||||
| RsessionActiveEntry | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1 | NA | ||
| CsessionIndex | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.1 | Integer32 (0..63) | RO | |
column · Integer32 (0..63) · read-only · current The index of the session. | ||||
| CsessionAccessType | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The access type of the session.
| ||||
| CsessionPhysicalPort | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The physical port type of the session. notSignificant : use for console port or when information is not available, local : a serial port (e.g. the CMM console), ether : an ethernet port (e.g. the EMP or NI)
| ||||
| CsessionUserName | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.4 | SnmpAdminString (SIZE (0..31)) | RO | |
column · SnmpAdminString (SIZE (0..31)) · read-only · current The user name of the user logged-in. | ||||
| CsessionUserReadPrivileges | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.5 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The read privileges of the user logged-in. These privileges are stored as a bitmap. Each bit represents a command family. The number of families may go up to 64. Applied for functional authorization (partitioned management). | ||||
| CsessionUserWritePrivileges | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.6 | OCTET STRING (SIZE (16)) | RO | |
column · OCTET STRING (SIZE (16)) · read-only · current The write privileges of the user logged-in. These privileges are stored as a bitmap. Each bit represents a command family. The number of families may go up to 64. Applied for functional authorization (partitioned management). | ||||
| CsessionUserProfileName | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.7 | SnmpAdminString (SIZE (0..31)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..31)) · read-only · obsolete The profile name of the logged-in user. Applied for the end-user partitioned management. | ||||
| CsessionUserIpAddress | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.8 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the user logged-in. | ||||
| CsessionRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. An entry in this table is dynamically created when a user connects to the switch (through console, telnet, ftp or http). The only value supported for set is destroy(6), to kill a user session. | ||||
| CsessionUserInetAddressType | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.10 | InetAddressType | RO | |
column · InetAddressType · read-only · current The IP address type of the user logged-in. | ||||
| CsessionUserInetAddress | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.11 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address of the user logged-in. | ||||
| SsessionLoginTimeout | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.3 | Integer32 (5..600) | RW | |
scalar · Integer32 (5..600) · read-write · current At login time, it is the time in seconds to get the password, after the username has been keyed in. | ||||
| SsessionLoginAttempt | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.4 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current The maximum number of login attempts for one session. | ||||
| SsessionCliCommandLogEnable | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current CLI command logging status. Enable(1) will save all CLI set command activilies on flash memory. Disable(2) will stop the record
| ||||
| SsessionXonXoffEnable | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable xon-xoff flow control on console port
| ||||
| NswitchMgtTrapsObj | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7 | |||
| SsessionAuthFailure | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The reason why the user authentication failed.
| ||||
| SsessionDefaultCredential | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specify if the 'admin' user logged in using the default password.
| ||||
| SsessionResetToFactoryUsername | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7.3 | SnmpAdminString (SIZE (0..32)) | RW | |
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current Name of the user who activates reset-to-factory. | ||||
| SsessionResetToFactoryIpAddressType | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7.4 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current IP Address Type of the session which activates reset-to-factory. | ||||
| SsessionResetToFactoryIpAddress | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7.5 | InetAddress | RW | |
scalar · InetAddress · read-write · current IP Address of the session which activates reset-to-factory. | ||||
| SsessionResetToFactoryCommand | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7.6 | SnmpAdminString (SIZE (0..255)) | RW | |
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Command of the session which activates reset-to-factory. | ||||
| SsessionReauthenticationInterval | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The reauthentication interval for sessions in minutes. | ||||
| SsessionCliAutoCompleteSpace | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable auto completion of CLI command.
| ||||
| SsessionFtpLimitNum | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.10 | Integer32 (1..4) | RW | |
scalar · Integer32 (1..4) · read-write · current Session ftp limit number. | ||||
| SsessionSshLimitNum | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.11 | Integer32 (1..8) | RW | |
scalar · Integer32 (1..8) · read-write · current Session ssh limit number. | ||||
| SsessionTelnetLimitNum | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.12 | Integer32 (1..6) | RW | |
scalar · Integer32 (1..6) · read-write · current Session telnet limit number. | ||||
| SsessionHttpLimitNum | 1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.13 | Integer32 (1..32) | RW | |
scalar · Integer32 (1..32) · read-write · current Session http/https limit number. | ||||
| NalcatelIND1SessionMgrMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2 | |||
node · current Branch For Session Manager Subsystem Conformance Information. | ||||
| NalcatelIND1SessionMgrMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2.1 | |||
node · current Branch For Session Manager Subsystem Units Of Conformance. | ||||
| GsessionConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2.1.1 | |||
group · current Collection of objects for management of Session Manager. | ||||
| GsessionActiveGroup | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2.1.2 | |||
group · current Collection of objects for management of users sessions. | ||||
| GsessionTrapsGroup | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2.1.3 | |||
group · current Collection of Traps for management of users sessions. | ||||
| GsessionObjectGroup | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2.1.4 | |||
group · current Collection of objects used in sessions.
| ||||
| NalcatelIND1SessionMgrMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2.2 | |||
node · current Branch For Session Manager Subsystem Compliance Statements. | ||||
| MalcatelIND1SessionMgrMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.7.1.2.2.1 | |||
compliance · current Compliance statement for Session Manager Subsystem. | ||||
Traps / Notifications
- sessionAuthenticationSuccessTrap
1.3.6.1.4.1.6486.801.1.2.1.7.1.0.2 - sessionAuthenticationTrap
1.3.6.1.4.1.6486.801.1.2.1.7.1.0.1 - sessionResetToFactoryTrap
1.3.6.1.4.1.6486.801.1.2.1.7.1.0.3