ALCATEL-IND1-RIPNG-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Configuration Of Global RIPNG Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-RIPNG-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-RIPNG-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.10.12.1Imports
| ALCATEL-IND1-BASE | routingIND1Ripng |
|---|---|
| IPV6-TC | Ipv6Address, Ipv6AddressPrefix |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1RIPNGMIB | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Configuration Of Global RIPNG Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1RIPNGMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1 | |||
node · current Branch for Routing Information Protocol (RIPNG) Subsystem Managed Objects. | ||||
| NalaProtocolRipng | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1 | |||
| SalaRipngProtoStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Global administration status of RIPng.
| ||||
| SalaRipngUpdateInterval | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.2 | Integer32 (1..120) | RW | |
scalar · Integer32 (1..120) · read-write · current Interval (in seconds) that RIPng routing updates will be sent out. The value must be less than or equal to one-third the the invalid timer and greater or equal to two times the jitter value.
| ||||
| SalaRipngInvalidTimer | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.3 | Integer32 (1..360) | RW | |
scalar · Integer32 (1..360) · read-write · current Time in seconds that a route will remain active in RIB before being moved to the invalid state. The value must be at least three times the update interval. The defined range of 1 to 360 allows backwards compatibility with older devices which do not enforce the three-times constraint. For newer devices which enforce the three-times constraint with the update interval, the minimum allowed value of the invalid timer is 3.
| ||||
| SalaRipngHolddownTimer | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.4 | Integer32 (0..120) | RW | |
scalar · Integer32 (0..120) · read-write · current Time to keep a route in the holddown state. | ||||
| SalaRipngGarbageTimer | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.5 | Integer32 (0..180) | RW | |
scalar · Integer32 (0..180) · read-write · current Time to keep a route before garbage collection. | ||||
| SalaRipngRouteCount | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.6 | Integer32 (0..2147483647) | RO | |
scalar · Integer32 (0..2147483647) · read-only · current The number of network routes in RIPng routing table. | ||||
| SalaRipngGlobalRouteTag | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.7 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The route tag that will be added to all RIPng entries | ||||
| SalaRipngTriggeredSends | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls whether trigged updates contain entire RIB or just changes.
| ||||
| SalaRipngJitter | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.9 | Integer32 (0..60) | RW | |
scalar · Integer32 (0..60) · read-write · current Jitter to use when sending updates. The value must be less than one-half the update interval.
| ||||
| SalaRipngPort | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.10 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Port to send/receive packets on. | ||||
| TalaRipngInterfaceTable | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11 | NA | ||
table · not-accessible · current RIPng interfaces. | ||||
| RalaRipngInterfaceEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1 | NA | ||
| CalaRipngInterfaceIndex | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current IPv6 index of this interface. | ||||
| CalaRipngInterfaceStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Create/delete RIPng interfaces. | ||||
| CalaRipngInterfaceMetric | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.3 | Integer32 (1..15) | RC | |
column · Integer32 (1..15) · read-create · current Metric used on this interface. | ||||
| CalaRipngInterfaceRecvStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Controls whether or not to recv updates on this intf.
| ||||
| CalaRipngInterfaceSendStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Controls whether or not to send updates on this intf.
| ||||
| CalaRipngInterfaceHorizon | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Controls use of split horizon on this interface.
| ||||
| CalaRipngInterfacePacketsSent | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current # of packets sent on this interface. | ||||
| CalaRipngInterfacePacketsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current # of packets received on this interface. | ||||
| CalaRipngInterfaceMTU | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Max Transfer size of RIPng packets on this interface | ||||
| CalaRipngInterfaceNextUpdate | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.11.1.10 | TimeTicks | RO | |
column · TimeTicks · read-only · current Seconds remaining for the next update on this interface | ||||
| TalaRipngPeerTable | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15 | NA | ||
table · not-accessible · current RIPng peers. | ||||
| RalaRipngPeerEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1 | NA | ||
| CalaRipngPeerAddress | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.1 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current Address of peer. | ||||
| CalaRipngPeerIndex | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.2 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current IPv6 index of the interface on which this peer is seen | ||||
| CalaRipngPeerLastUpdate | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.3 | TimeTicks | RO | |
column · TimeTicks · read-only · current Last Update received. | ||||
| CalaRipngPeerNumUpdates | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Total # of updates received from this peer. | ||||
| CalaRipngPeerNumRoutes | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Total # of routes received from this peer. | ||||
| CalaRipngPeerBadPackets | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Total # of bad packets received. | ||||
| CalaRipngPeerBadRoutes | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.15.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Total # of bad routes received. | ||||
| TalaRipngRouteTable | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16 | NA | ||
table · not-accessible · current Ripng routing table which contains the routes. | ||||
| RalaRipngRouteEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1 | NA | ||
row · not-accessible · current Ripng routing table which contains the network routes | ||||
| CalaRipngRoutePrefix | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.1 | Ipv6AddressPrefix | NA | |
column · Ipv6AddressPrefix · not-accessible · current The destination IP address of this route. | ||||
| CalaRipngRoutePrefixLen | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.2 | Integer32 (0..128) | NA | |
column · Integer32 (0..128) · not-accessible · current The prefix length for this route. | ||||
| CalaRipngRouteNextHop | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.3 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current The address of the next hop to reach this route. | ||||
| CalaRipngRouteType | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The type of route.
| ||||
| CalaRipngRouteAge | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current The number of seconds since this route was last updated or otherwise determined to be correct. | ||||
| CalaRipngRouteTag | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.6 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The associated route tag | ||||
| CalaRipngRouteMetric | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.7 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current The routing metric for this route. | ||||
| CalaRipngRouteStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the route has been installed into the IP Route Manager's fib.
| ||||
| CalaRipngRouteFlags | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The assocated flags for this route.
| ||||
| CalaRipngRouteIndex | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.1.1.16.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current IPv6 index of the interface on which the route gateway can be reached | ||||
| NalcatelIND1RIPNGMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2 | |||
node · current Branch for Routing Information Protocol (RIPNG) Subsystem Conformance Information. | ||||
| NalcatelIND1RIPNGMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1 | |||
node · current Branch for Routing Information Protocol (RIPNG) Subsystem Units Of Conformance. | ||||
| GalaRipngGlobalGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.1 | |||
group · current Collection of Miscellaneous objects for management of RIP. | ||||
| GalaRipngInterfaceGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.3 | |||
group · current Collection of Miscellaneous objects for management of RIP. | ||||
| GalaRipngPeerGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.7 | |||
group · current Collection of Miscellaneous objects for management of RIP. | ||||
| GalaRipngRouteGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.8 | |||
group · current Collection of Miscellaneous objects for management of RIP. | ||||
| GalcatelIND1RIPNGTrapsGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.1.9 | |||
| NalcatelIND1RIPNGMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.2 | |||
node · current Branch for Routing Information Protocol (RIPNG) Subsystem Compliance Statements. | ||||
| MalcatelIND1RIPMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.2.2.1 | |||
compliance · current Compliance statement for RIPng subsystem. | ||||
| NalcatelIND1RIPNGTraps | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.3 | |||
| NalcatelIND1RIPNGTrapsRoot | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.3.0 | |||
| !ripngRouteMaxLimitReached | 1.3.6.1.4.1.6486.801.1.2.1.10.12.1.3.0.1 | |||
notification · current This notification is generated as RIPng database reached supported maximum entries. RIPng will discard any new updates. | ||||
Traps / Notifications
- ripngRouteMaxLimitReached
1.3.6.1.4.1.6486.801.1.2.1.10.12.1.3.0.1