ALCATEL-IND1-RIP-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Configuration Of Global RIP Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-RIP-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-RIP-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.10.3.1Imports
| ALCATEL-IND1-BASE | routingIND1Rip |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| RIPv2-MIB | rip2IfConfEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1RIPMIB | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Configuration Of Global RIP Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1RIPMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1 | |||
node · current Branch for Routing Information Protocol (RIP) Subsystem Managed Objects. | ||||
| NalaProtocolRip | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1 | |||
| SalaRipProtoStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Global administration status of RIP.
| ||||
| SalaRipHostRouteSupport | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable support for host routes.
| ||||
| SalaRipRedistRouteTag | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.4 | Integer32 (0..2147483647) | RW | |
scalar · Integer32 (0..2147483647) · read-write · current A 32-bit value tagged to each RIP internal route while it is redistributed in to other routing protocol domains. The lower 16-bits typically indicate the autonomous system number. | ||||
| SalaRipForceHolddownTimer | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.5 | Integer32 (0..120) | RW | |
scalar · Integer32 (0..120) · read-write · current Interval in seconds during which routing information regarding better paths is suppressed. A route enters into a forced holddown state when an update packet is received that indicates the route is unreachable and when this timer value is nonzero. After this timer has expired, if the value is less that 120 - the route enters a holddown state for the rest of the period until 120. During this time advertisements for better paths are accepted if any. | ||||
| SalaRipRouteNumber | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.6 | Integer32 (0..2147483647) | RO | |
scalar · Integer32 (0..2147483647) · read-only · current The number of network routes in RIP routing table. | ||||
| TalaRip2IfConfAugTable | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11 | NA | ||
table · not-accessible · current Expansion for rip2ifconftable | ||||
| RalaRip2IfConfAugEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1 | NA | ||
| CalaRip2IfConfEncryptKey | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.1 | AlaAuthenticationEncryptKey | RW | |
column · AlaAuthenticationEncryptKey · read-write · current The authentication encryption key that is used to decypher RIP passwords. | ||||
| CalaRip2IfIpConfStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the associated IP interface
| ||||
| CalaRip2IfRecvPkts | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Number of packets received on this interface | ||||
| CalaRip2IfConfName | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.4 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current The user defined name used to identify the IP interface | ||||
| CalaRip2IfConfType | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The type of the rip interface
| ||||
| CalaRip2IfConfPtoPPeer | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.6 | IpAddress | RW | |
column · IpAddress · read-write · current The address of the peer for a point-to-point rip interface | ||||
| CalaRip2IfConfIngressFilterRouteMapName | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.7 | SnmpAdminString (SIZE (0..20)) | RW | |
column · SnmpAdminString (SIZE (0..20)) · read-write · current The name of a Route Map to be applied when filtering RIP routing updates received on this RIP interface. RIP routes that are explicitly denied by a Route Map are filtered. An empty string indicates that no filtering action is performed (this is the default). If the Route Map is specified and a RIP route doesn't match any Route Map route or if there is a match that is permitted, the RIP route is not filtered. Route Map manipulators (SET commands configured for a Route Map) are not applied when filtering is performed. (cf. alaRouteMapNameTable.AlaRouteMapNameEntry.alaRouteMapName) | ||||
| CalaRip2IfConfEgressFilterRouteMapName | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.8 | SnmpAdminString (SIZE (0..20)) | RW | |
column · SnmpAdminString (SIZE (0..20)) · read-write · current The name of a Route Map to be applied when filtering RIP routing updates sent out this RIP interface. RIP routes that are explicitly denied by a Route Map are filtered. An empty string indicates that no filtering action is performed (this is the default). If the Route Map is specified and a RIP route doesn't match any Route Map route or if there is a match that is permitted, the RIP route is not filtered. Route Map manipulators (SET commands configured for a Route Map) are not applied when filtering is performed. (cf. alaRouteMapNameTable.AlaRouteMapNameEntry.alaRouteMapName) | ||||
| CalaRip2IfIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.9 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The ifIndex value which identifies the local interface on which RIP is configured. | ||||
| CalaRip2IfKeyChainId | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Key Chain ID for RIP interface. | ||||
| TalaRipEcmpRouteTable | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12 | NA | ||
table · not-accessible · current ECMP-enabled RIP routing table which contains the network routes. | ||||
| RalaRipEcmpRouteEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1 | NA | ||
row · not-accessible · current ECMP-enabled RIP routing table which contains the network routes. | ||||
| CalaRipEcmpRouteDest | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The destination IP address of this route. | ||||
| CalaRipEcmpRouteMask | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The network mask for this route. | ||||
| CalaRipEcmpRouteNextHop | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The address of the next hop to reach this route. | ||||
| CalaRipEcmpRouteType | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The type of route.
| ||||
| CalaRipEcmpRouteAge | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current The number of seconds since this route was last updated or otherwise determined to be correct. | ||||
| CalaRipEcmpRouteTag | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.6 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The associated route tag. | ||||
| CalaRipEcmpRouteMetric | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.7 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current The routing metric for this route. | ||||
| CalaRipEcmpRouteStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used according to row installation and removal conventions. | ||||
| CalaRipEcmpRouteState | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The associated state for this route.
| ||||
| SalaRipUpdateInterval | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.13 | Integer32 (1..120) | RW | |
scalar · Integer32 (1..120) · read-write · current Interval (in seconds) that RIP routing updates will be sent out. The value must be less than or equal to one-third the value of the invalid timer.
| ||||
| SalaRipInvalidTimer | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.14 | Integer32 (3..360) | RW | |
scalar · Integer32 (3..360) · read-write · current Time in seconds that a route will remain active in RIB before being moved to the invalid state. The value must be at least three times the update interval.
| ||||
| SalaRipHolddownTimer | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.15 | Integer32 (0..120) | RW | |
scalar · Integer32 (0..120) · read-write · current Time to keep a route in the holddown state.
| ||||
| SalaRipGarbageTimer | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.16 | Integer32 (0..180) | RW | |
scalar · Integer32 (0..180) · read-write · current Time to keep a route before garbage collection.
| ||||
| NalcatelIND1RIPMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2 | |||
node · current Branch for Routing Information Protocol (RIP) Subsystem Conformance Information. | ||||
| NalcatelIND1RIPMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1 | |||
node · current Branch for Routing Information Protocol (RIP) Subsystem Units Of Conformance. | ||||
| GalaRipMiscellaneousGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.1 | |||
group · current Collection of Miscellaneous objects for management of RIP. | ||||
| GalaRip2IfConfAugGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.2 | |||
group · current Collection of RIP2 Interface objects. | ||||
| GalaProtocolRipGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.3 | |||
group · current Collection of RIP Protocol objects. | ||||
| GalaRipEcmpRouteGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.6 | |||
group · current Collection of objects for management of Network Route configuration. | ||||
| GalcatelIND1RIPTrapsGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.7 | |||
| NalcatelIND1RIPMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.2 | |||
node · current Branch for Routing Information Protocol (RIP) Subsystem Compliance Statements. | ||||
| MalcatelIND1RIPMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.2.1 | |||
compliance · current Compliance statement for Routing Information Protocol (RIP) Subsystem. | ||||
| NalcatelIND1RIPTraps | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.3 | |||
| NalcatelIND1RIPTrapsRoot | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.3.0 | |||
| !ripRouteMaxLimitReached | 1.3.6.1.4.1.6486.801.1.2.1.10.3.1.3.0.1 | |||
notification · current This notification is generated as RIP database reached supported Maximum entries. RIP will discard any new updates. | ||||
Textual conventions
AlaAuthenticationEncryptKeyOCTET STRING (SIZE (16))The authentication encryption key that is used to decypher RIP simple passwords.
Traps / Notifications
- ripRouteMaxLimitReached
1.3.6.1.4.1.6486.801.1.2.1.10.3.1.3.0.1