ALCATEL-IND1-PORT-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This group contains the configuration information data
for the Ethernet and Fiber Channel Switching Module.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2022
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-PORT-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-PORT-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.5.1Imports
| ALCATEL-IND1-BASE | softentIND1Port |
|---|---|
| ALCATEL-IND1-LAG-MIB | alclnkaggAggIndex |
| ALCATEL-IND1-VIRTUAL-CHASSIS-MIB | VirtualOperChassisId |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifEntry, ifInErrors, ifIndex, ifOutErrors |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IalcatelIND1PortMIB | 1.3.6.1.4.1.6486.801.1.2.1.5.1 | ||||||||||||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This group contains the configuration information data
for the Ethernet and Fiber Channel Switching Module.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2022
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | |||||||||||||
| NalcatelIND1PortNotifications | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0 | ||||||||||||
| !esmDrvTrapDropsLink | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.1 | ||||||||||||
notification · current When the Ethernet code drops the link because of excessive errors, a Trap is sent.
| |||||||||||||
| !ddmTemperatureThresholdViolated | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.2 | ||||||||||||
notification · current This object notifies management station if an SFP/XFP/SFP+ temperature has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ temperature.
| |||||||||||||
| !ddmVoltageThresholdViolated | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.3 | ||||||||||||
notification · current This object notifies management station if an SFP/XFP/SFP+ supply voltage has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ supply voltage.
| |||||||||||||
| !ddmCurrentThresholdViolated | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.4 | ||||||||||||
notification · current This object notifies management station if an SFP/XFP/SFP+ Tx bias current has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx bias current.
| |||||||||||||
| !ddmTxPowerThresholdViolated | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.5 | ||||||||||||
notification · current This object notifies management station if an SFP/XFP/SFP+ Tx output power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx output power.
| |||||||||||||
| !ddmRxPowerThresholdViolated | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.6 | ||||||||||||
notification · current This object notifies management station if an SFP/XFP/SFP+ Rx optical power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Rx optical power.
| |||||||||||||
| !portViolationTrap | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.7 | ||||||||||||
notification · current A Trap will be generated when a port violation occurs. The port violation trap will indicate the source of the violation and the reason for the violation. | |||||||||||||
| !portViolationNotificationTrap | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.8 | ||||||||||||
notification · current A Trap will be generated when a port violation is cleared. This trap will indicate the reason for the recovery from violation.
| |||||||||||||
| !alaDyingGaspTrap | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.9 | ||||||||||||
notification · current Dying Gasp trap. | |||||||||||||
| !esmStormThresholdViolationStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.10 | ||||||||||||
notification · current This object notifies management station if User-Port ports gets the ingress traffic inflow above the configured value. | |||||||||||||
| !esmDrvTrapPortReset | 1.3.6.1.4.1.6486.801.1.2.1.5.1.0.11 | ||||||||||||
notification · current Port Reset trap. | |||||||||||||
| NalcatelIND1PortMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1 | ||||||||||||
| NesmConfTrap | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.1 | ||||||||||||
| SesmDrvTrapDrops | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.1.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Partitioned port (separated due to errors). | |||||||||||||
| NphysicalPort | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2 | ||||||||||||
| TesmConfTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1 | NA | |||||||||||
table · not-accessible · current A list of ESM Physical Port instances. | |||||||||||||
| ResmConfEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1 | NA | |||||||||||
| CesmPortSlot | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap. | |||||||||||||
| CesmPortIF | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap. | |||||||||||||
| CesmPortAutoSpeed | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The automatically detected port line speed of this ESM port.
| |||||||||||||
| CesmPortAutoDuplexMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The automatically detected port duplex mode
of this ESM port.
Note: GigaEthernet supports only Full duplex mode.
Default value for 10/100 = Half duplex mode.
| |||||||||||||
| CesmPortCfgSpeed | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The configured port line speed of this ESM port.
| |||||||||||||
| CesmPortCfgDuplexMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
| |||||||||||||
| CesmPortAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
| |||||||||||||
| CesmPortLinkUpDownTrapEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates whether linkUp/linkDown traps should be generated
for this interface.
By default, this object should have the value enable(1) for
interfaces which do not operate on 'top' of any other
interface (as defined in the ifStackTable), and disable(2)
otherwise.
| |||||||||||||
| CesmPortCfgMaxFrameSize | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Configure the value of the maximum frame
size allow.
For 10Mbps the range is upto 1518 bytes.
For ports with speed > 10Mbps the value can extend upto 9216 bytes. | |||||||||||||
| CesmPortAlias | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.12 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-write · current This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile
'handle' for the interface.
On the first instantiation of an interface, the value of
ifAlias associated with that interface is the zero-length
string. As and when a value is written into an instance of
ifAlias through a network management set operation, then the
agent must retain the supplied value in the ifAlias instance
associated with the same interface for as long as that
interface remains instantiated, including across all re-
initializations/reboots of the network management system,
including those which result in a change of the interface's
ifIndex value.
An example of the value which a network manager might store
in this object for a WAN interface is the (Telco's) circuit
number/identifier of the interface.
Some agents may support write-access only for interfaces
having particular values of ifType. An agent which supports
write access to this object is required to keep the value in
non-volatile storage, but it may limit the length of new
values depending on how much storage is already occupied by
the current values for other interfaces. | |||||||||||||
| CesmPortCfgPause | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used to configure the default
administrative PAUSE mode for this interface.
This object represents the
administratively-configured PAUSE mode for this
interface. If auto-negotiation is not enabled
or is not implemented for the active MAU
attached to this interface, the value of this
object determines the operational PAUSE mode
of the interface whenever it is operating in
full-duplex mode. In this case, a set to this
object will force the interface into the
specified mode.
If auto-negotiation is implemented and enabled
for the MAU attached to this interface, the
PAUSE mode for this interface is determined by
auto-negotiation, and the value of this object
denotes the mode to which the interface will
automatically revert if/when auto-negotiation is
later disabled. For more information on what
pause values will be autonegotiated based on
settings on this object, please refer to the
truth table in the users manual.
Note that the value of this object is ignored
when the interface is not operating in
full-duplex mode.
| |||||||||||||
| CesmPortCfgAutoNegotiation | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Allow the user to enable or disable the port auto negotiation.
| |||||||||||||
| CesmPortCfgCrossover | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Allow the user to configure port crossover. This object is applicable only to copper ports. For fiber ports notapplicable is returned as a status.
| |||||||||||||
| CesmPortCfgHybridActiveType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be different if esmPortCfgHybridMode is configured to be preferredFiber or preferredCopper) For non hybrid ports notapplicable is returned as a status.
| |||||||||||||
| CesmPortCfgHybridMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port should come up. The user can configure the port to come as copper only or fiber only or either fiber/copper (with preference to one of them).
| |||||||||||||
| CesmPortOperationalHybridType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.20 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing traffic. If link is not present the object will return none(0) value.
| |||||||||||||
| CesmPortBcastRateLimitEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.21 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable per port broadcast traffic rate limit. When 'enable' value from esmPortBcastRateLimit object will be applicable to the ingressing broadcast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming broadcast traffic which is limited by the port speed.
| |||||||||||||
| CesmPortBcastRateLimitType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.22 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The unit applicable to the value in esmPortBcastRateLimit object.
| |||||||||||||
| CesmPortBcastRateLimit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.23 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of the maximum broadcast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port speed.
It is mandatory to set esmPortBcastRateLimitType object along with
esmPortBcastRateLimit object to set the broadcast rate limit. | |||||||||||||
| CesmPortMcastRateLimitEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.24 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable per port multicast traffic rate limit. When 'enable' value from esmPortMcastRateLimit object will be applicable to the ingressing multicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming multicast traffic which is limited by the port speed.
| |||||||||||||
| CesmPortMcastRateLimitType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The unit applicable to the value in esmPortMcastRateLimit object.
| |||||||||||||
| CesmPortMcastRateLimit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.26 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of the maximum multicast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port speed.
It is mandatory to set esmPortMcastRateLimitType object along with
esmPortMcastRateLimit object to set the multicast rate limit. | |||||||||||||
| CesmPortUucastRateLimitEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.27 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable per port unknown unicast traffic rate limit. When 'enable' value from esmPortUucastRateLimit object will be applicable to the ingressing unknown unicast traffic if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming unknown unicast traffic which is limited by the port speed.
| |||||||||||||
| CesmPortUucastRateLimitType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.28 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The unit applicable to the value in esmPortUucastRate object.
| |||||||||||||
| CesmPortUucastRateLimit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.29 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of the maximum unknown unicast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port speed.
It is mandatory to set esmPortUucastRateLimitType object along with
esmPortUucastRateLimit object to set the unknown unicast rate limit. | |||||||||||||
| CesmPortIngressRateLimitEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.30 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable per port ingress traffic rate limit. When 'enable' value from esmPortIngressRate object will be applicable to the ingressing traffic (BC, MC, UUC) if the speed is greater than the limit else the default limit for the speed will be applied. When it is 'disable' no limit is applied to incoming traffic which is limited by the port speed.
| |||||||||||||
| CesmPortIngressRateLimit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.31 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of the maximum ingress traffic that can flow through the port. The actual value depends on the port speed if the configured value is greater than the current port speed. | |||||||||||||
| CesmPortIngressRateLimitBurst | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.32 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of ingress traffic burst size in Mbits. | |||||||||||||
| CesmPortEPPEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.33 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current use for port diagnostics
| |||||||||||||
| CesmPortEEEEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.34 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current 10Gbase-T Energy Efficent Ethernet port parameter.
| |||||||||||||
| CesmPortIsFiberChannelCapable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.35 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The port can be configured as Fiber Channel interface (yes) or can not be configured as Fiber Channel interface.
| |||||||||||||
| CesmPortBcastThresholdAction | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.36 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The port can be configured to send trap/shutdown if the threshold limit is crossed for Bcast Frames
| |||||||||||||
| CesmPortMcastThresholdAction | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.37 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The port can be configured to send trap/shutdown if the threshold limit is crossed for Mcast Frames
| |||||||||||||
| CesmPortUucastThresholdAction | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.38 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The port can be configured to send trap/shutdown if the threshold limit is crossed Unknown Unicast Frames
| |||||||||||||
| CesmPortMinBcastRateLimit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.39 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of low threshold for bcast. | |||||||||||||
| CesmPortMinMcastRateLimit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.40 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of low threshold for mcast. | |||||||||||||
| CesmPortMinUucastRateLimit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.41 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of low threshold for uucast. | |||||||||||||
| CesmPortBcastStormState | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.42 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the port for broadcast Storm Control.
| |||||||||||||
| CesmPortMcastStormState | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.43 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the port for multi-cast Storm Control.
| |||||||||||||
| CesmPortUucastStormState | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.44 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the port for uucast Storm Control.
| |||||||||||||
| CesmLinkStateChangeTime | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.45 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Time when the link status changed last. | |||||||||||||
| CesmLinkStateChangeCount | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.46 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Counter to represent the number of times the link status changed. | |||||||||||||
| CesmPortIfg | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.47 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The value of inter packet gap in bytes. | |||||||||||||
| CesmPortFecMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.48 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Allow the user to enable or disable the port fec mode. Auto mode will select the appropiate mode based on cable capabilities.
| |||||||||||||
| CesmPortFecOperMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.49 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Access operational fec mode.
| |||||||||||||
| CesmPortGbicType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.50 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current information about Port Speed connected with SFP
| |||||||||||||
| CesmPortInterfaceType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.51 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the port type. Copper(1) and fiber(2) are fixed types and NOT configurable.
| |||||||||||||
| CesmPortDownReason | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.52 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The port down or violation reason.
| |||||||||||||
| CesmPortMacsecSupported | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.53 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The port has macsec supported (yes) or not (no).
| |||||||||||||
| CesmPortMacsec256bit | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.54 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The port has macsec 256 bit (yes) or not (no).
| |||||||||||||
| CesmPortMacsecXpn | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.55 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The port has macsec xpn (yes) or not (no).
| |||||||||||||
| CesmPortReset | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.56 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The port reset.
| |||||||||||||
| TalcetherStatsTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2 | NA | |||||||||||
table · not-accessible · current A list of Ethernet statistics entries. | |||||||||||||
| RalcetherStatsEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1 | NA | |||||||||||
row · not-accessible · current A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named alcetherStatsPkts.1
| |||||||||||||
| CalcetherClearStats | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Used to Clear all Statistics counters. By default, this object contains zero value.
| |||||||||||||
| CalcetherLastClearStats | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.2 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value. | |||||||||||||
| CalcetherStatsCRCAlignErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | |||||||||||||
| CalcetherStatsRxUndersizePkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||||||||||
| CalcetherStatsTxUndersizePkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||||||||||
| CalcetherStatsTxOversizePkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||||||||||
| CalcetherStatsRxJabbers | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms. | |||||||||||||
| CalcetherStatsRxCollisions | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The best estimate of the total number of collisions on this Ethernet segment (in reception). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected. | |||||||||||||
| CalcetherStatsTxCollisions | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The best estimate of the total number of collisions on this Ethernet segment (in transmition). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected. | |||||||||||||
| CalcetherStatsPkts64Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). | |||||||||||||
| CalcetherStatsPkts65to127Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | |||||||||||||
| CalcetherStatsPkts128to255Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | |||||||||||||
| CalcetherStatsPkts256to511Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | |||||||||||||
| CalcetherStatsPkts512to1023Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | |||||||||||||
| CalcetherStatsPkts1024to1518Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). For both Ethernet and GigaEthernet. | |||||||||||||
| CgigaEtherStatsPkts1519to4095Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 1519 and 4095 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces | |||||||||||||
| CgigaEtherStatsPkts4096to9215Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.17 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 4096 and 9215 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces | |||||||||||||
| CalcetherStatsPkts1519to2047Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.18 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames(including error packets) received that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsPkts2048to4095Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.19 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames(including error packets) received that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsPkts4096Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.20 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames(including error packets) received that were greater than or equal to 4096 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsRxGiantPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.21 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames that are greater than the specified Max length value, with a valid CRC, dropped because too long. | |||||||||||||
| CalcetherStatsRxDribbleNibblePkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.22 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames for which a dribble nibble has been received and CRC is correct. | |||||||||||||
| CalcetherStatsRxLongEventPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.23 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames for which the Carrier sense exceeds 50000 bit times for 10 Mbits/sec or 80000 bit times for 100 Mbits/sec. | |||||||||||||
| CalcetherStatsRxVlanTagPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.24 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames for which Type/Length field contains the VLAN protocol identifier (0x8100). | |||||||||||||
| CalcetherStatsRxControlPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.25 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames that were recognized as control frames. | |||||||||||||
| CalcetherStatsRxLenChkErrPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a type field. | |||||||||||||
| CalcetherStatsRxCodeErrPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.27 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames for which one or more nibbles were signaled as errors during reception of the frame. | |||||||||||||
| CalcetherStatsRxDvEventPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.28 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames for which a RX_DV event (packet not too long enough to be valid packet) has been seen before the correct frame. | |||||||||||||
| CalcetherStatsRxPrevPktDropped | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.29 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames for which a packet has been dropped (because of too small IFG) before the correct frame. | |||||||||||||
| CalcetherStatsTx64Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.30 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames of 64 bytes. | |||||||||||||
| CalcetherStatsTx65to127Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.31 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTx128to255Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.32 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTx256to511Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.33 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTx512to1023Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.34 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTx1024to1518Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.35 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTx1519to2047Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.36 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTx2048to4095Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.37 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTx4096Octets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.38 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were greater than or equal to 4096 bytes in length and less than Max frame length (excluding framing bits but including FCS bytes). | |||||||||||||
| CalcetherStatsTxRetryCount | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.39 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of collisions that the frames faced during transmission attempts. | |||||||||||||
| CalcetherStatsTxVlanTagPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.40 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames for which Type/Length field contains the VLAN protocol identifier (0x8100). | |||||||||||||
| CalcetherStatsTxControlPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.41 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames that were recognised as control frames. | |||||||||||||
| CalcetherStatsTxLatePkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.42 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of late collisions that occured beyond the collision window. | |||||||||||||
| CalcetherStatsTxTotalBytesOnWire | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.43 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of bytes transmitted on wire, including all bytes from collided attempts. | |||||||||||||
| CalcetherStatsTxLenChkErrPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.44 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of transmitted frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a Type field. | |||||||||||||
| CalcetherStatsTxExcDeferPkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.45 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of frames that were deferred in excess of 6071 nibble-times in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This stat is only in case of Half duplex and excessive defer bit reset). | |||||||||||||
| TesmHybridConfTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3 | NA | |||||||||||
table · not-accessible · current A list of inactive hybrid port instances. | |||||||||||||
| ResmHybridConfEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1 | NA | |||||||||||
| CesmHybridPortCfgSpeed | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The configured port line speed of this ESM port.
| |||||||||||||
| CesmHybridPortCfgDuplexMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
| |||||||||||||
| CesmHybridPortCfgAutoNegotiation | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Allow the user to enable or disable the port auto negotiation.
| |||||||||||||
| CesmHybridPortCfgCrossover | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Allow the user to configure port crossover.
| |||||||||||||
| CesmHybridPortCfgFlow | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode object in dot3PauseTable. It is used to configure pause for fiber media.
| |||||||||||||
| CesmHybridPortCfgInactiveType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object is only applicable to hybrid ports . It indicates the configured inactive media type.
| |||||||||||||
| TddmInfoTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5 | NA | deprecated | ||||||||||
table · not-accessible · deprecated The ddmInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components. | |||||||||||||
| RddmInfoEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1 | NA | |||||||||||
row · not-accessible · current Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
| |||||||||||||
| CddmTemperature | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.1 | Integer32 (-200000 | -150000..150000) | RO | ||||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTemperature indicates the current temperature
of the SFP/XFP in 1000s of degrees Celsius.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTempLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.2 | Integer32 (-200000 | -150000..150000) | RO | ||||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempLowWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTempLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.3 | Integer32 (-200000 | -150000..150000) | RO | ||||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempLowAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTempHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.4 | Integer32 (-200000 | -150000..150000) | RO | ||||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempHiWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTempHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.5 | Integer32 (-200000 | -150000..150000) | RO | ||||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempHiAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmSupplyVoltage | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.6 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltage indicates the current supply
voltage of the SFP/XFP in 1000s of Volts (V).
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmSupplyVoltageLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.7 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmSupplyVoltageLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.8 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmSupplyVoltageHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.9 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmSupplyVoltageHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.10 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxBiasCurrent | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.11 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA).
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxBiasCurrentLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.12 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxBiasCurrentLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.13 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxBiasCurrentHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.14 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxBiasCurrentHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.15 | Integer32 (-200000 | 0..10000) | RO | ||||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxOutputPower | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.16 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPower indicates the current Output
Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxOutputPowerLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.17 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxOutputPowerLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.18 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxOutputPowerHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.19 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmTxOutputPowerHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.20 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmRxOpticalPower | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.21 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmRxOpticalPowerLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.22 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmRxOpticalPowerLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.23 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmRxOpticalPowerHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.24 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmRxOpticalPowerHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.25 | Integer32 (-200000 | -40000..10000) | RO | ||||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| TddmPortInfoTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6 | NA | |||||||||||
table · not-accessible · current The ddmPortInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex and port channel. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components. | |||||||||||||
| RddmPortInfoEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1 | NA | |||||||||||
row · not-accessible · current Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
| |||||||||||||
| CddmPortChannel | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.1 | Integer32 (1..4) | RO | 1 | |||||||||
column · Integer32 (1..4) · read-only · current The channel number of the data that is being read. In the case
of a QSFP there will be 4 10 gigabyte channels, for SFP/XFP there
will only be one.
Example values from LibreNMS test devices
| |||||||||||||
| CddmPortTemperature | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.2 | Integer32 (-200000 | -150000..150000) | RO | 40000 | |||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTemperature indicates the current temperature
of the SFP/XFP in 1000s of degrees Celsius.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTempLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.3 | Integer32 (-200000 | -150000..150000) | RO | -40000 | |||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempLowWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTempLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.4 | Integer32 (-200000 | -150000..150000) | RO | -40000 | |||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempLowAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTempHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.5 | Integer32 (-200000 | -150000..150000) | RO | 85000 | |||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempHiWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTempHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.6 | Integer32 (-200000 | -150000..150000) | RO | 90000 | |||||||||
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempHiAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortSupplyVoltage | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.7 | Integer32 (-200000 | 0..10000) | RO | 3283 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltage indicates the current supply
voltage of the SFP/XFP in 1000s of Volts (V).
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortSupplyVoltageLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.8 | Integer32 (-200000 | 0..10000) | RO | 2955 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortSupplyVoltageLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.9 | Integer32 (-200000 | 0..10000) | RO | 0 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortSupplyVoltageHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.10 | Integer32 (-200000 | 0..10000) | RO | 3645 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortSupplyVoltageHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.11 | Integer32 (-200000 | 0..10000) | RO | 4000 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxBiasCurrent | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.12 | Integer32 (-200000 | 0..10000) | RO | 4466 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA).
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxBiasCurrentLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.13 | Integer32 (-200000 | 0..10000) | RO | 2000 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxBiasCurrentLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.14 | Integer32 (-200000 | 0..10000) | RO | 1000 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxBiasCurrentHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.15 | Integer32 (-200000 | 0..10000) | RO | 9000 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxBiasCurrentHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.16 | Integer32 (-200000 | 0..10000) | RO | 10000 | |||||||||
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxOutputPower | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.17 | Integer32 (-200000 | -40000..10000) | RO | -4986 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPower indicates the current Output
Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxOutputPowerLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.18 | Integer32 (-200000 | -40000..10000) | RO | -6989 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxOutputPowerLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.19 | Integer32 (-200000 | -40000..10000) | RO | -10000 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxOutputPowerHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.20 | Integer32 (-200000 | -40000..10000) | RO | -2218 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortTxOutputPowerHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.21 | Integer32 (-200000 | -40000..10000) | RO | -969 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortRxOpticalPower | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.22 | Integer32 (-200000 | -40000..10000) | RO | -5212 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortRxOpticalPowerLowWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.23 | Integer32 (-200000 | -40000..10000) | RO | -16989 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortRxOpticalPowerLowAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.24 | Integer32 (-200000 | -40000..10000) | RO | -20000 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortRxOpticalPowerHiWarning | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.25 | Integer32 (-200000 | -40000..10000) | RO | 0 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| CddmPortRxOpticalPowerHiAlarm | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.26 | Integer32 (-200000 | -40000..10000) | RO | 2041 | |||||||||
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||||||||||
| TalcfcStatsTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7 | NA | |||||||||||
table · not-accessible · current A list of Fiber Channel statistics entries. | |||||||||||||
| RalcfcStatsEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1 | NA | |||||||||||
row · not-accessible · current A collection of statistics kept for a particular Fiber Channel interface. As an example, an instance of the fcStatsPkts object might be named alcfcStatsPkts.1
| |||||||||||||
| CalcfcClearStats | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Used to Clear all Statistics counters. By default, this object contains zero value.
| |||||||||||||
| CalcfcLastClearStats | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.2 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value. | |||||||||||||
| CalcfcStatsRxUndersizePkts | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of packets received that were less than 36 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||||||||||
| CalcfcStatsTxBBCreditZeros | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of transitions in/out of the buffer-to-buffer credit zero state. | |||||||||||||
| CalcfcStatsRxBBCreditZeros | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of times RX BBCredit drops to zero. | |||||||||||||
| CalcfcStatsLinkFailures | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of link failures. | |||||||||||||
| CalcfcStatsLossofSynchs | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of loss of word-sync detected. | |||||||||||||
| CalcfcStatsLossofSignals | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of loss of signals detected. | |||||||||||||
| CalcfcStatsPrimSeqProtocolErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of primitive sequence protocol errors detected. | |||||||||||||
| CalcfcStatsInvalidTxWords | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of invalid transmission words. This includes invalid ordered sets and invalid data words. | |||||||||||||
| CalcfcStatsInvalidCRCs | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of frames received with an invalid CRC. | |||||||||||||
| CalcfcStatsInvalidOrderedSets | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of invalid ordered sets received at this port. | |||||||||||||
| CalcfcStatsFrameTooLongs | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of frames received at this port for which the frame length was greater than what was agreed to in FLOGI/PLOGI. | |||||||||||||
| CalcfcStatsDelimiterErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.16 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of invalid delimiters received | |||||||||||||
| CalcfcStatsEncodingDisparityErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.17 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of detected running disparity at 10b/8b level. | |||||||||||||
| CalcfcStatsOtherErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.18 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of errors detected but not counted by any other error counter. This only includes RX frames drops due to zero RX BBCredits | |||||||||||||
| TesmTdrPortTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8 | NA | |||||||||||
table · not-accessible · current The table lists the results of cable diagnostics. | |||||||||||||
| ResmTdrPortEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1 | NA | |||||||||||
| CesmTdrPortCableState | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.1 | CableState | RO | ||||||||||
column · CableState · read-only · current State of a cable as returned by the TDR test. | |||||||||||||
| CesmTdrPortValidPairs | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The number of wire pairs in the cable for which the results of this test are valid. | |||||||||||||
| CesmTdrPortPair1State | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.3 | CableState | RO | ||||||||||
column · CableState · read-only · current The state for wire pair-1 of the cable as returned by the TDR test. | |||||||||||||
| CesmTdrPortPair1Length | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The length for wire pair-1 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||||||||||
| CesmTdrPortPair2State | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.5 | CableState | RO | ||||||||||
column · CableState · read-only · current The state for wire pair-2 of the cable as returned by the TDR test. | |||||||||||||
| CesmTdrPortPair2Length | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The length for wire pair-2 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||||||||||
| CesmTdrPortPair3State | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.7 | CableState | RO | ||||||||||
column · CableState · read-only · current The state for wire pair-3 of the cable as returned by the TDR test. | |||||||||||||
| CesmTdrPortPair3Length | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The length for wire pair-3 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||||||||||
| CesmTdrPortPair4State | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.9 | CableState | RO | ||||||||||
column · CableState · read-only · current The state for wire pair-4 of the cable as returned by the TDR test. | |||||||||||||
| CesmTdrPortPair4Length | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The length for wire pair-4 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||||||||||
| CesmTdrPortFuzzLength | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.11 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The error in the estimated length of the cable (as returned by TDR test). | |||||||||||||
| CesmTdrPortTest | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Object used to start a TDR test on the port. When configured as on, it initiates a TDR test on the port. A read operation on this object always returns the value off.
| |||||||||||||
| CesmTdrPortClearStats | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Used to Clear TDR stats. This MIB object is to trigger a clear of the stats. The value of the object will revert back to default after the action is completed.
| |||||||||||||
| CesmTdrPortResult | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Used to give the status of BCM API,whether API able to execute TDR test successfully or failed to executethe TDR test.
| |||||||||||||
| TesmPortModeTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9 | NA | |||||||||||
table · not-accessible · current A list of interface entries. This table contains Configured Port mode and operational port mode | |||||||||||||
| ResmPortModeEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1 | NA | |||||||||||
row · not-accessible · current An entry containing additional management information applicable to a particular interface with respect to port mode
| |||||||||||||
| CesmConfiguredMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The desired mode of the interface. When a managed system initializes, all interfaces start with ifConfiguredMode in the Auto state. User is not allowed to configure this parameter for subport
| |||||||||||||
| CesmOperationalMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operational mode of the port
| |||||||||||||
| CstartPortModeIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.3 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The start IfIndex of the port that is part of same Port Mode group | |||||||||||||
| CendPortModeIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.4 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The end IfIndex of the port that is part of same Port Mode group | |||||||||||||
| TesmPortBeaconTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10 | NA | |||||||||||
table · not-accessible · current A list of interface entries. This table contains Beacon Admin State Beacon Led Color and Beacon Led mode | |||||||||||||
| ResmPortBeaconEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1 | NA | |||||||||||
row · not-accessible · current An entry containing additional management information applicable to a particular interface with respect to Beacon
| |||||||||||||
| CesmBeaconAdminState | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.1 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The beacon admin state of the interface. When a managed system initializes, all interfaces start with esmBeaconAdminState in disable state
| |||||||||||||
| CesmBeaconLedColor | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Beacon Led Color of the port
| |||||||||||||
| CesmBeaconLedMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Beacon Led Mode of the port
| |||||||||||||
| CesmBeaconRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row status to control creation/deletion of the Beacon | |||||||||||||
| TesmPortGroupTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11 | NA | |||||||||||
table · not-accessible · current A list of port group entries. This table contains Configured Port group speed and Operational Port group speed | |||||||||||||
| ResmPortGroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1 | NA | |||||||||||
row · not-accessible · current An entry containing configured and operational port group speed applicable to a particular port group and list of member port
| |||||||||||||
| CesmPortGroupIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The port group ifIndex component of this instance. | |||||||||||||
| CesmConfiguredPortGroupSpeed | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The desired speed of the port group. When a managed system initializes, all portgroup start with esmConfiguredPortGroupSpeed in the Auto state
| |||||||||||||
| CesmOperationalPortGroupSpeed | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.11.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operational port group speed
| |||||||||||||
| TesmPortBreakOutTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.12 | NA | |||||||||||
table · not-accessible · current A list of port group entries. This table contains port break out. | |||||||||||||
| ResmPortBreakOutEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.12.1 | NA | |||||||||||
row · not-accessible · current An entry containing configured and operational port break out applicable to a particular port.
| |||||||||||||
| CesmPortBreakOutEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.12.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable or disable port break out.
| |||||||||||||
| NddmConfiguration | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4 | ||||||||||||
| SddmConfig | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object enables/disables DDM software feature in the system.
| |||||||||||||
| SddmTrapConfig | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This objects enables/disables traps for DDM warning/alarm threshold violations.
| |||||||||||||
| SddmNotificationType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.4.3 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This object defines the trap type for monitored DDM parameters.
| |||||||||||||
| NportViolations | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5 | ||||||||||||
| TportViolationTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1 | NA | |||||||||||
table · not-accessible · current This table contains the port Violations per port. | |||||||||||||
| RportViolationEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1 | NA | |||||||||||
row · not-accessible · current Port Violation Entry. The entries in this table are indexed by 3 units, 1. ifIndex of the port for which the violation is set 2. source of the violation, the feature or module 3. reason for the violation (sub reason under each source). | |||||||||||||
| CportViolationIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The IfIndex of the port that has a violation. | |||||||||||||
| CportViolationSource | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.2 | INTEGER | AN | ||||||||||
column · INTEGER · accessible-for-notify · current Indicates the source of the port violation. The source is the feature or module that has caused the violation. The list is given below 1. Initiated by Access Guardian 2. Initiated by QOS Policy 3. Initiated by Net Sec 4. Initiated by UDLD 5. Initiated by NI supervison (Fabric Stability). 6. initiated by OAM 8. initiated by LFP 9. initiated by Link Monitor 10. initiated by LBD 11. initiated by SPB 12. initiated by ESM 13. initiated by ESM 14. initiated by LLDP When there is no value the value of this will be 0
| |||||||||||||
| CportViolationReason | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.3 | INTEGER | AN | ||||||||||
column · INTEGER · accessible-for-notify · current The Reason for the port violation. This will be application specific. The Reason indicate the violation for the 1st Violation that happened on this port.
| |||||||||||||
| CportViolationAction | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The action determines on violation, what action will taken. Either the port would be shutdown or Admin Down or wait for the timer to expire and the timerAction will determine what needs to be done.
| |||||||||||||
| CportViolationTimer | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.5 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current If any timer is associated with the violation This is Zero if no timer is associated. | |||||||||||||
| CportViolationTimerAction | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The Timer related action. If set to portDownAfterTimer, no operation will be performed on the port and the port will be shutdown after timer expiry. If set to portUpAfterTimer the port will be shutdown immediately and after the timer expiry the port will brought up..
| |||||||||||||
| CportViolationClearPort | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When this MIB object is set all violation on the given port will be cleared. The Indices portViolationSource and portViolationReason should be set to 0
| |||||||||||||
| CportViolationCfgRecoveryMax | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.8 | Integer32 (-1..50) | RO | ||||||||||
column · Integer32 (-1..50) · read-only · current The maximum attempts for auto-recovery as configured for the ifindex in alaPvrRecoveryMax. Value 0 means auto recovery is disabled for this port. Value -1 means auto recovery will retry infinitely. | |||||||||||||
| CportViolationCfgRetryTime | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.9 | Integer32 (30..600) | RO | ||||||||||
column · Integer32 (30..600) · read-only · current The time (in seconds) between auto-recovery attempts as configured for the ifindex in alaPvrRetryTime.
| |||||||||||||
| CportViolationRetryRemain | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of remaining auto-recovery attempts. Value -1 means there are infinite retries remaining. | |||||||||||||
| TalaLinkMonConfigTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2 | NA | |||||||||||
table · not-accessible · current A list of Link Monitoring Configuration Parameters | |||||||||||||
| RalaLinkMonConfigEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1 | NA | |||||||||||
row · not-accessible · current A collection of Link Monitoring configurations kept for a particular Ethernet interface.
| |||||||||||||
| CalaLinkMonStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Allows the user to enable or disable Link Monitoring on the port.
| |||||||||||||
| CalaLinkMonTimeWindow | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.2 | Integer32 (10..3600) | RW | ||||||||||
column · Integer32 (10..3600) · read-write · current Indicates the number of seconds the Link will be monitored for a port. | |||||||||||||
| CalaLinkMonLinkFlapThreshold | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.3 | Integer32 (2..10) | RW | ||||||||||
column · Integer32 (2..10) · read-write · current Indicaes the number of link flaps allowed for the specified port during the time window before the port is shutdown. | |||||||||||||
| CalaLinkMonLinkErrorThreshold | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.4 | Integer32 (1..100) | RW | ||||||||||
column · Integer32 (1..100) · read-write · current Indicates the number of link errors allowed on Rx for the specified port during the time window before the port is shutdown. The errors are the MAC errors that include CRC, lost frames, error frames, alignment frames. | |||||||||||||
| CalaLinkMonWaitToRestoreTimer | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.5 | Integer32 (0..300) | RW | ||||||||||
column · Integer32 (0..300) · read-write · current Indicates the number of seconds after which the link up event is notified to other applications. The timer is started whenever a Link Up is detected on a port being monitored. | |||||||||||||
| CalaLinkMonWaitToShutdownTimer | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.6 | Integer32 (0..300000) | RW | ||||||||||
column · Integer32 (0..300000) · read-write · current Indicates the number of milli seconds after which the link down event is notified to other applications. The timer is started whenever a Link down is detected on a port being monitored. | |||||||||||||
| TalaLinkMonStatsTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3 | NA | |||||||||||
table · not-accessible · current A list of Link Monitoring Statistics | |||||||||||||
| RalaLinkMonStatsEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1 | NA | |||||||||||
row · not-accessible · current A collection of Link Monitoring statistics for a particular Ethernet interface.
| |||||||||||||
| CalaLinkMonStatsClearStats | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Used to Clear all Statistics counters. The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port. By default, this object contains zero value.
| |||||||||||||
| CalaLinkMonStatsPortState | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the status of the port.
up(1) means the port is physically up,
down(2) means the port is physically down,
shutdown(3) means the interface is shutdown because of excessive link flaps or link errors.
| |||||||||||||
| CalaLinkMonStatsCurrentLinkFlaps | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the number of Link flaps in the current time window. | |||||||||||||
| CalaLinkMonStatsCurrentErrorFrames | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the number of error frames in the current time window. | |||||||||||||
| CalaLinkMonStatsCurrentCRCErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the number of CRC errors in the current time window. | |||||||||||||
| CalaLinkMonStatsCurrentLostFrames | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the number of Rx Lost frames in the current time window. | |||||||||||||
| CalaLinkMonStatsCurrentAlignErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the number of Rx alignment frames in the current time window. | |||||||||||||
| CalaLinkMonStatsCurrentLinkErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the sum of all the MAC Errors within the current time window. i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, alaLinkMonCurrentLosFrames, alaLinkMonStatsCurrentAlignErrors. | |||||||||||||
| CalaLinkMonStatsTotalLinkFlaps | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the total number of link flaps across all the time windows. | |||||||||||||
| CalaLinkMonStatsTotalLinkErrors | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Indicates the total number of link errors across all the time windows. | |||||||||||||
| TalaLFPGroupTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4 | NA | |||||||||||
table · not-accessible · current A list of Link Fault Propagation Grooups and their status | |||||||||||||
| RalaLFPGroupEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1 | NA | |||||||||||
row · not-accessible · current The list of Link Fault Propagation group id and status for each group
| |||||||||||||
| CalaLFPGroupId | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.1 | Integer32 (1..8) | AN | ||||||||||
column · Integer32 (1..8) · accessible-for-notify · current Indicates the unique group id for Link Fault Propagation (LFP). | |||||||||||||
| CalaLFPGroupAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates the admin status of the group. disable(2) means link fault propagation, is disbaled. enable(1) means link fault propagation is enabled
| |||||||||||||
| CalaLFPGroupOperStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the operational status of the group. down(2) means all the source ports are down, up(1) means atleast one source port in the group is up.
| |||||||||||||
| CalaLFPGroupWaitToShutdown | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.4 | Integer32 (0..300) | RC | ||||||||||
column · Integer32 (0..300) · read-create · current 0 - Disable wait to shutdown timer 5 - 300 - after expiry of this timer all destination ports will be shutdown | |||||||||||||
| CalaLFPGroupRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row Status for initiating a MIB retrieval request. | |||||||||||||
| TalaLFPConfigTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5 | NA | |||||||||||
table · not-accessible · current A list of Link Fault Propagation port and port type of each LFP group | |||||||||||||
| RalaLFPConfigEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1 | NA | |||||||||||
row · not-accessible · current A list of Link Fault Propagation port and port type of each LFP group | |||||||||||||
| CalaLFPConfigPort | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.1 | InterfaceIndex | AN | ||||||||||
column · InterfaceIndex · accessible-for-notify · current Indicates ifindex of source/destination port for a LFP Group. | |||||||||||||
| CalaLFPConfigPortType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates the type of port, (1) means the port is destination port and (2) means the port is a destination port for a LFP Group.
| |||||||||||||
| CalaLFPConfigRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row Status for initiating a MIB retrieval request. | |||||||||||||
| NalaPvrGlobalConfigObjects | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6 | ||||||||||||
| SalaPvrGlobalRecoveryMax | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6.1 | Integer32 (-1..50) | RW | ||||||||||
scalar · Integer32 (-1..50) · read-write · current Auto violation recovery maximum attempts. Value 0 means auto recovery is disabled for any ports using this global value. Value -1 means auto recovery will retry infinitely for any ports using this global value. | |||||||||||||
| SalaPvrGlobalRetryTime | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6.2 | Integer32 (30..600) | RW | ||||||||||
scalar · Integer32 (30..600) · read-write · current Time (in seconds) between auto violation recovery attempts for any ports using this global value.
| |||||||||||||
| SalaPvrGlobalTrapEnable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.6.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Auto violation recovery global trap configuration
| |||||||||||||
| TalaPvrConfigTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7 | NA | |||||||||||
table · not-accessible · current A list of auto violation recovery configuration parameters | |||||||||||||
| RalaPvrConfigEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1 | NA | |||||||||||
| CalaPvrRecoveryMax | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1.1 | Integer32 (-2..50) | RW | ||||||||||
column · Integer32 (-2..50) · read-write · current Per port maximum auto violation recovery maximum attempts. Value -2 means use value from alaPvrGlobalRecoveryMax Value -1 means retry infinitely. Value 0 means disable this port. Values 1 to 50 mean 1 to 50 auto violation recovery attempts. | |||||||||||||
| CalaPvrRetryTime | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1.2 | Integer32 (-2 | 30..600) | RW | ||||||||||
column · Integer32 (-2 | 30..600) · read-write · current Per port time (in seconds) between auto violation recovery attempts. Value -2 means use value from alaPvrGlobalRetryTime.
| |||||||||||||
| NalaPortViolationTrapObjects | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.8 | ||||||||||||
| SportViolationRecoveryReason | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.8.1 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current The reason for the recovery from port violation. It can be
none (1): none.
clearViolationCmd (2): Indicates that the port is recovered from
clear violation command.
recoveryTimer (3): Indicates that the port is recovered by
Recovery Timer mechanism.
adminUpDown (4): Indicates that the port is recovered from
admin Up/Down.
nativeRecoveryTimer (5): Indicates that the port is recovered
from the feature that shutdown the interface.
| |||||||||||||
| NcsmConfTrap | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6 | ||||||||||||
| SalaDyingGaspChassisId | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.1 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current This object specifies the chassis id of the chassis whose NI is going down. | |||||||||||||
| SalaDyingGaspPowerSupplyType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.2 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This object specifies the type of the power supply.
| |||||||||||||
| SalaDyingGaspTime | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.6.3 | DateAndTime | AN | ||||||||||
scalar · DateAndTime · accessible-for-notify · current This object specifies the time (in UTC) of power failure. | |||||||||||||
| NinterfaceCounters | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7 | ||||||||||||
| TinterfaceStatsTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1 | NA | |||||||||||
table · not-accessible · current Expansion for ifEntry. | |||||||||||||
| RinterfaceStatsEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1 | NA | |||||||||||
| CinBitsPerSec | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The average number of Bits Received per second | |||||||||||||
| CoutBitsPerSec | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The average number of Bits Transmitted per second | |||||||||||||
| CifInPauseFrames | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The average number of Pause Frames Received per second | |||||||||||||
| CifOutPauseFrames | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The average number of Pause Frames Transmitted per second | |||||||||||||
| CifInPktsPerSec | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The average number of Packet Received per second | |||||||||||||
| CifOutPktsPerSec | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The average number of Packets Transmitted per second | |||||||||||||
| NesmStormTrap | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.8 | ||||||||||||
| SesmStormViolationThresholdNotificationType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.8.1 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This type defines the trap genrated by storm control feature for high or low threshold.
| |||||||||||||
| SesmStormViolationThresholdTrafficType | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.8.2 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This type defines the traffic for which the trap genrated by storm control feature for high or low threshold.
| |||||||||||||
| NlinkAggPort | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9 | ||||||||||||
| TalcLagStatsTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1 | NA | |||||||||||
table · not-accessible · current A list of Link Aggregation statistics entries. | |||||||||||||
| RalcLagStatsEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1.1 | NA | |||||||||||
row · not-accessible · current A collection of statistics kept for a particular Link Aggregation interface. alclnkaggAggIndex is defined in alclnkaggAggTable; it is of SYNTAX InterfaceIndex (aka ifIndex) starting at value 40000001 for link agg 1. Index values received outside of the range for link aggregation interfaces will return an error.
| |||||||||||||
| CalcLagClearStats | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Used to Clear all Link Aggregation Statistics counters. New stats collection starts immediately. No meaningful read on this object.
| |||||||||||||
| NalaPtpConfiguration | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10 | ||||||||||||
| SalaPtpConfigAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object enables/disables PTP software feature in the system.
| |||||||||||||
| SalaPtpConfigPriority | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.2 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current This object use for configure PTP priority. | |||||||||||||
| SalaPtpConfigMode | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.3 | SnmpAdminString (SIZE (0..32)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-only · current This object denotes the current PTP mode. | |||||||||||||
| TalaPtpPortTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.4 | NA | |||||||||||
table · not-accessible · current This table manages PTP port's admin-state. | |||||||||||||
| RalaPtpPortEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.4.1 | NA | |||||||||||
row · not-accessible · current An entry containing additional management information applicable to a particular interface with respect to ptp.
| |||||||||||||
| CalaPtpPortAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.4.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current this object enables/disables PTP port's admin-state.
| |||||||||||||
| SalaPtpLoopBackPort1 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.5 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| SalaPtpLoopBackPort2 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.6 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| SalaPtpLoopBackPort3 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.7 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| SalaPtpLoopBackPort4 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.8 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| SalaPtpLoopBackPort5 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.9 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| SalaPtpLoopBackPort6 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.10 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| SalaPtpLoopBackPort7 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.11 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| SalaPtpLoopBackPort8 | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.10.12 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This object contain PTP loopback portlist interface index. | |||||||||||||
| NalaPortXConfiguration | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11 | ||||||||||||
| TalaPortXTable | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11.1 | NA | |||||||||||
table · not-accessible · current This table manages port's additional parameters. | |||||||||||||
| RalaPortXEntry | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11.1.1 | NA | |||||||||||
row · not-accessible · current An entry containing additional management information applicable to a particular interface.
| |||||||||||||
| CalaPortXLoopbackStatus | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.11.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current this object enables/disables port's Loopback status.
| |||||||||||||
| NportResetTrap | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12 | ||||||||||||
| SportResetStartIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.1 | InterfaceIndex | AN | ||||||||||
scalar · InterfaceIndex · accessible-for-notify · current Start interface index. | |||||||||||||
| SportResetEndIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.2 | InterfaceIndex | AN | ||||||||||
scalar · InterfaceIndex · accessible-for-notify · current End interface index. | |||||||||||||
| SportResetUserName | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.3 | SnmpAdminString (SIZE (1..63)) | AN | ||||||||||
scalar · SnmpAdminString (SIZE (1..63)) · accessible-for-notify · current User name. | |||||||||||||
| SportResetErrorWarningDescription | 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.12.4 | SnmpAdminString (SIZE (1..255)) | AN | ||||||||||
scalar · SnmpAdminString (SIZE (1..255)) · accessible-for-notify · current Port reset error or warning discription. | |||||||||||||
| NalcatelIND1PortMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2 | ||||||||||||
| NalcatelIND1PortMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1 | ||||||||||||
| MesmConfPortCompliance | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.1 | ||||||||||||
compliance · current The compliance statement for the configuration of Ethernet ports.
| |||||||||||||
| MalcEtherStatsCompliance | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.2 | ||||||||||||
compliance · current The compliance statement for the Statistics of the Ethernet ports. | |||||||||||||
| MalcLagStatsCompliance | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.1.3 | ||||||||||||
compliance · current The compliance statement for the Statistics of the Link Aggregation ports.
| |||||||||||||
| NalcatelIND1PortMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2 | ||||||||||||
| GesmConfMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.1 | ||||||||||||
group · current A collection of objects to support the management of global configuration parameters of the Ethernet ports.
| |||||||||||||
| GesmDetectedConfMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.2 | ||||||||||||
group · current A collection of objects to support the Detected configuration parameters of the Ethernet ports. | |||||||||||||
| GalcEtherStatsMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.3 | ||||||||||||
group · current A collection of objects to provide all the statistics related to the Ethernet and GigaEthernert ports.
| |||||||||||||
| GalcPortNotificationGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.4 | ||||||||||||
group · current The Port MIB Notification Group. | |||||||||||||
| GddmInfoGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.6 | ||||||||||||
group · current A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s.
| |||||||||||||
| GddmConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.7 | ||||||||||||
group · current A collection of objects to allow configuration of DDM and DDM traps.
| |||||||||||||
| GddmNotificationsGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.8 | ||||||||||||
group · current A collection of notifications used to indicate DDM threshold violations. | |||||||||||||
| GesmConfTrapGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.9 | ||||||||||||
group · current Partitioned port (separated due to errors). | |||||||||||||
| GesmHybridConfEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.10 | ||||||||||||
group · current A list of inactive hybrid port instances. | |||||||||||||
| GesmConfEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.11 | ||||||||||||
group · current A list of ESM Physical Port instances. | |||||||||||||
| GportViolationEntryGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.12 | ||||||||||||
group · current This table contains the port Violations per port. | |||||||||||||
| GddmPortInfoGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.13 | ||||||||||||
group · current A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s.
| |||||||||||||
| GalaLinkMonConfigMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.14 | ||||||||||||
group · current A collection of objects to support the Link Monitoring Configurations on the ports. | |||||||||||||
| GalaLinkMonStatsMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.15 | ||||||||||||
group · current A collection of objects to provide all the statistics related to the Link Monitoring on the ports.
| |||||||||||||
| GalaLFPGroupMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.16 | ||||||||||||
group · current A collection of objects to configure Link Fault Propagation Group, Wait to shutdown timer and admin staus of group. | |||||||||||||
| GalaLFPConfigMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.17 | ||||||||||||
group · current A collection of objects to configure a port and port type for a Link Fault Propagation Group. | |||||||||||||
| GcsmConfTrapGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.18 | ||||||||||||
group · current A collection of objects for chassis supervision traps | |||||||||||||
| GesmTdrPortGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.19 | ||||||||||||
group · current A collection of objects to provide TDR information
| |||||||||||||
| GalcfcStatsGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.20 | ||||||||||||
group · current A collection of objects for chassis supervision traps
| |||||||||||||
| GesmPortFiberstatsGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.21 | ||||||||||||
group · current A collection of objects for chassis supervision traps
| |||||||||||||
| GalaPvrGlobalConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.22 | ||||||||||||
group · current A collection of global pvr objects | |||||||||||||
| GesmPortModeGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.23 | ||||||||||||
group · current A collection of objects for port splitter mode | |||||||||||||
| GesmPortBeaconGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.24 | ||||||||||||
group · current A collection of objects for port Beacon | |||||||||||||
| GalaPvrConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.25 | ||||||||||||
| GinterfaceStatsMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.26 | ||||||||||||
group · current A collection of objects to display the interface counters details of the ports | |||||||||||||
| GalaPortViolationTrapGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.27 | ||||||||||||
| GalcLagStatsMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.28 | ||||||||||||
| GalaPtpConfigurationGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.29 | ||||||||||||
group · current A collection of objects to allow configuration of PTP. | |||||||||||||
| GalaPtpPortGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.30 | ||||||||||||
| GalaPortXGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.31 | ||||||||||||
group · current A collection of objects to allow configuration of additional Port Configuration attributes.
| |||||||||||||
| GesmPortGroupGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.32 | ||||||||||||
group · current A collection of objects for port Group | |||||||||||||
| GesmPortBreakOutGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.33 | ||||||||||||
| GesmPortResetGroup | 1.3.6.1.4.1.6486.801.1.2.1.5.1.2.2.34 | ||||||||||||
group · current A collection of objects for port reset | |||||||||||||
Textual conventions
CableStateINTEGERcrossTalk(5)faulty(7)ok(1)open(2)openShort(4)short(3)unknown(6)an enumerated value used to indicate the status of a cable pair
Traps / Notifications
- alaDyingGaspTrap
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.9 - ddmCurrentThresholdViolated
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.4 - ddmRxPowerThresholdViolated
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.6 - ddmTemperatureThresholdViolated
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.2 - ddmTxPowerThresholdViolated
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.5 - ddmVoltageThresholdViolated
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.3 - esmDrvTrapDropsLink
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.1 - esmDrvTrapPortReset
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.11 - esmStormThresholdViolationStatus
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.10 - portViolationNotificationTrap
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.8 - portViolationTrap
1.3.6.1.4.1.6486.801.1.2.1.5.1.0.7
Groups and compliance
- alaLFPConfigMIBGroup
- alaLFPGroupMIBGroup
- alaLinkMonConfigMIBGroup
- alaLinkMonStatsMIBGroup
- alaPortViolationTrapGroup
- alaPortXGroup
- alaPtpConfigurationGroup
- alaPtpPortGroup
- alaPvrConfigGroup
- alaPvrGlobalConfigGroup
- alcEtherStatsCompliance
- alcEtherStatsMIBGroup
- alcLagStatsCompliance
- alcLagStatsMIBGroup
- alcPortNotificationGroup
- alcfcStatsGroup
- csmConfTrapGroup
- ddmConfigGroup
- ddmInfoGroup
- ddmNotificationsGroup
- ddmPortInfoGroup
- esmConfEntryGroup
- esmConfMIBGroup
- esmConfPortCompliance
- esmConfTrapGroup
- esmDetectedConfMIBGroup
- esmHybridConfEntryGroup
- esmPortBeaconGroup
- esmPortBreakOutGroup
- esmPortFiberstatsGroup
- esmPortGroupGroup
- esmPortModeGroup
- esmPortResetGroup
- esmTdrPortGroup
- interfaceStatsMIBGroup
- portViolationEntryGroup