ALCATEL-IND1-OSPF3-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of OSPFv3 global configuration parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, o
r
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-OSPF3-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-OSPF3-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.10.13.1Imports
| ALCATEL-IND1-BASE | routingIND1Ospf3 |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| IPV6-TC | Ipv6Address, Ipv6IfIndexOrZero |
| OSPFV3-MIB | ospfv3AreaEntry, ospfv3IfEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1OSPF3MIB | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of OSPFv3 global configuration parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, o
r
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1OSPF3MIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1 | |||
| NalaProtocolOspf3 | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1 | |||
| SalaOspf3OrigRouteTag | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.1 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Route tag that is originated with ASEs | ||||
| SalaOspf3TimerSpfDelay | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.2 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Delay (in seconds) between topology change and SPF run | ||||
| SalaOspf3TimerSpfHold | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.3 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Delay (in seconds) between subsequent SPF executions | ||||
| SalaOspf3RestartHelperSupport | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This router can be a helper to another restarting router
| ||||
| SalaOspf3RestartStrictLsaChecking | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.5 | INTEGER | RW | deprecated |
scalar · INTEGER · read-write · deprecated Will changed LSA result in restart termination
| ||||
| SalaOspf3RestartInitiate | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Start a planned graceful restart
| ||||
| SalaOspf3MTUCheck | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Verify the MTU of a neighbor matches our own.
| ||||
| TalaOspf3RouteTable | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8 | NA | ||
table · not-accessible · current OSPF3 Routing table. This table contains an entry for each valid OSPF unicast route that can be used for packet forwarding determination. It is for display purposes only. | ||||
| RalaOspf3RouteEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1 | NA | ||
row · not-accessible · current A routing entry. | ||||
| CalaOspf3RouteDest | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.1 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current The destination IPv6 address of this route. | ||||
| CalaOspf3RoutePfxLength | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.2 | Integer32 (0..128) | NA | |
column · Integer32 (0..128) · not-accessible · current Indicates the prefix length of the destination address.
| ||||
| CalaOspf3RouteNextHop | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.3 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current On remote routes, the address of the next
system en route; otherwise, ::0
('00000000000000000000000000000000'H in ASN.1
string representation). | ||||
| CalaOspf3RouteIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.4 | Ipv6IfIndexOrZero | NA | |
column · Ipv6IfIndexOrZero · not-accessible · current The index value which uniquely identifies the local interface through which the next hop of this route should be reached. | ||||
| CalaOspf3RouteType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The type of this route.
| ||||
| CalaOspf3RoutePathType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The routing metric path type for this route.
| ||||
| CalaOspf3RouteMetric1 | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The primary routing metric for this route. | ||||
| CalaOspf3RouteMetric2 | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current An alternate routing metric for this route. It's 0 for internal routes. For an external route, it's the metric to reach the ASBR that announced the external route. | ||||
| SalaOspf3BfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables bfd for OSPF protocol
| ||||
| SalaOspf3BfdAllInterfaceStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables bfd for all OSPF interfaces
| ||||
| TalaOspf3IfAugTable | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11 | NA | ||
table · not-accessible · current Expansion for ospf3IfTable | ||||
| RalaOspf3IfAugEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1 | NA | ||
| CalaOspf3IfBfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current Enables/Disables OSP3F for a BFD interface
| ||||
| CalaOspf3IfBfdDrsOnly | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Enables/Disables Drs Only option for a BFD interface
| ||||
| TalaOspf3AreaAugTable | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12 | NA | ||
table · not-accessible · current This table extends the ofpv3 area table and it is used to display very granular LSA Counts, Host and Interface counts | ||||
| RalaOspf3AreaAugEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1 | NA | ||
| CalaOspf3AreaRouterLsaCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the Router LSA Count. | ||||
| CalaOspf3AreaNetworkLsaCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the Network LSA Count. | ||||
| CalaOspf3AreaIntraAreaPrefixLsaCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the Intra Area LSA Count. | ||||
| CalaOspf3AreaInterAreaPrefixLsaCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the Inter area LSA Count. | ||||
| CalaOspf3AreaInterAreaRouterLsaCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the inter area Router LSA Count. | ||||
| CalaOspf3AreaHostCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the host count. | ||||
| CalaOspf3AreaInterfaceCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the Interface count. | ||||
| CalaOspf3AreaSummarizationRangeCount | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object indicates the summarization range count. | ||||
| SalaOspf3RestartHelperStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates whether this OSPF router is operating as a Helper to a restarting router.
| ||||
| TalaOspf3BorderRouterTable | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14 | NA | ||
table · not-accessible · current OSPF3 Routing table which allows collections of contiguous networks and hosts to be grouped together. | ||||
| RalaOspf3BorderRouterEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1 | NA | ||
row · not-accessible · current OSPF3 Routing table which allows collections of contiguous networks and hosts to be grouped together. | ||||
| CalaOspf3BorderRouterAreaIdType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The IP address type of the area to which the border router belongs to. InetAddressIPv4 (1) type is supported.
| ||||
| CalaOspf3BorderRouterAreaId | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.2 | InetAddress | NA | |
column · InetAddress · not-accessible · current The area to which the border router belongs to. | ||||
| CalaOspf3BorderRouterIdType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.3 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The IP address type of the router idenitifer of this border router. InetAddressIPv4 (1) type is supported.
| ||||
| CalaOspf3BorderRouterId | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.4 | InetAddress | NA | |
column · InetAddress · not-accessible · current The router idenitifer of this border router. | ||||
| CalaOspf3BorderRouterPathType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.5 | INTEGER | NA | |
column · INTEGER · not-accessible · current The routing metric path type for this route.
| ||||
| CalaOspf3BorderRouterNextHopType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.6 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The IP address type of the address of the next hop to reach this border router. InetAddressIPv6 (2) type is supported.
| ||||
| CalaOspf3BorderRouterNextHop | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.7 | InetAddress | NA | |
column · InetAddress · not-accessible · current The address of the next hop to reach this border router. | ||||
| CalaOspf3BorderRouterMetric | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The cost to reach the border router. | ||||
| CalaOspf3BorderRouterType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The type of border router.
| ||||
| SalaOspf3DefaultOriginate | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates whether this ASBR router originates the default route into the OSPFv3 normal area(s). If set to 'only', the default route is advertised into the OSPFv3 normal area, provided the ASBR has a route to 0.0.0.0/0 in its routing table. Alternatively, if set to 'always', a default route is advertised into the OSPFv3 domain regardless of whether the ASBR has a route to 0.0.0.0/0. A value of 'none' has the effect of not originating the default route.
| ||||
| SalaOspf3DefaultOriginateMetricType | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Type of metric to be used with the default route.
| ||||
| SalaOspf3DefaultOriginateMetric | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.17 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Default metric to be used for the default route. | ||||
| NalcatelIND1OSPF3MIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2 | |||
| NalcatelIND1OSPF3MIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.1 | |||
| MalcatelIND1OSPF3MIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.1.1 | |||
compliance · current The compliance statement for OSPFv3 and implementing the ALCATEL-IND1-OSPF3 MIB.
| ||||
| NalcatelIND1OSPF3MIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2 | |||
| GalaOSPF3ConfigMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.1 | |||
group · current A collection of objects to support management of OSPF3.
| ||||
| GalaOspf3RouteGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.2 | |||
group · current Collection of objects for management of Network Route. | ||||
| GalaOspf3AreaGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.3 | |||
group · current Collection of objects for management of Router LSAs. | ||||
| GalaOspf3BorderRouterGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.4 | |||
group · current Collection of objects for management of routes to Border Routers. | ||||