ALCATEL-IND1-LAG-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
The Link Aggregation module for managing ALCATEL FALCON product
This MIB is an image of the 802.3ad standard.
The aim of this proprietary MIB is to allow the creation of
aggregate objects with their size.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-LAG-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-LAG-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.13.1Imports
| ALCATEL-IND1-BASE | softentIND1LnkAgg |
|---|---|
| IEEE8023-LAG-MIB | ChurnState, LacpKey, LacpState |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IalcatelIND1LAGMIB | 1.3.6.1.4.1.6486.801.1.2.1.13.1 | ||||||||||||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
The Link Aggregation module for managing ALCATEL FALCON product
This MIB is an image of the 802.3ad standard.
The aim of this proprietary MIB is to allow the creation of
aggregate objects with their size.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | |||||||||||||
| NalcatelIND1LAGMIBNotifications | 1.3.6.1.4.1.6486.801.1.2.1.13.1.0 | ||||||||||||
node · current Branch For LAG MIB Subsystem Notifications. | |||||||||||||
| !lnkaggAggUp | 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.1 | ||||||||||||
notification · current The Link Aggregation is active . This trap is sent when any one port of the link aggregation goes to attached state.
| |||||||||||||
| !lnkaggAggDown | 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.2 | ||||||||||||
notification · current The Link Aggregation is not active . This trap is sent when all ports of the link aggregation goes out of attached state.
| |||||||||||||
| !lnkaggPortJoin | 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.3 | ||||||||||||
notification · current The Link Aggregation port joins the aggregate . This trap is sent when given port of the link aggregation goes to attached state.
| |||||||||||||
| !lnkaggPortLeave | 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.4 | ||||||||||||
notification · current The Link Aggregation port leaves the aggregate . This trap is sent when given port of the link aggregation goes out of attached state.
| |||||||||||||
| !lnkaggPortRemove | 1.3.6.1.4.1.6486.801.1.2.1.13.1.0.5 | deprecated | |||||||||||
notification · deprecated The Link Aggregation port removed from the aggregate . This trap is sent when given port of the link aggregation removed due to invalid configuration .
| |||||||||||||
| NalcatelIND1LAGMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1 | ||||||||||||
| NalclnkaggAgg | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1 | ||||||||||||
| TalclnkaggAggTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1 | NA | |||||||||||
table · not-accessible · current A table that contains information about every Aggregator that is associated with this System. To create specify alclnkaggAggIndex,alclnkaggAggSize and alclnkaggAggLacpType. | |||||||||||||
| RalclnkaggAggEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1 | NA | |||||||||||
row · not-accessible · current A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator.
| |||||||||||||
| CalclnkaggAggIndex | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only. | |||||||||||||
| CalclnkaggAggMACAddress | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.2 | MacAddress | RO | 2c:fa:a2:de:e1:26 | |||||||||
column · MacAddress · read-only · current A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator. | |||||||||||||
| CalclnkaggAggActorSystemPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.3 | Integer32 (0..65535) | RC | 0 | |||||||||
column · Integer32 (0..65535) · read-create · current A 2-octet read-write value indicating the priority value associated with the Actor's System ID. Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggActorSystemID | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.4 | MacAddress | RC | 00:00:00:00:00:00 | |||||||||
column · MacAddress · read-create · current A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed. objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see ). Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggPartnerAdminKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.5 | LacpKey | RC | 0 | |||||||||
column · LacpKey · read-create · current The current Administrative value of the Key accepted for the
Aggregator's current protocol Partner. Optional this is
a 16-bit read-write value. If the aggregation is manually
configured, this Key value will be a value assigned by the
local System. The administrative Key value may differ from
the operational. Configurable range is 1-65535. | |||||||||||||
| CalclnkaggAggActorAdminKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.6 | LacpKey | RC | 1 | |||||||||
column · LacpKey · read-create · current The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit, read-write value. The meaning of particular Key values is of local significance. Configurable range is 1-65535. | |||||||||||||
| CalclnkaggAggActorOperKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.7 | LacpKey | RO | 1 | |||||||||
column · LacpKey · read-only · current The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in . This is a 16-bit read-only value. The meaning of particular Key values is of local significance. | |||||||||||||
| CalclnkaggAggPartnerSystemID | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.8 | MacAddress | RC | 00:00:00:00:00:00 | |||||||||
column · MacAddress · read-create · current A 6-octet read-write MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System. Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggPartnerSystemPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.9 | Integer32 (0..65535) | RC | 0 | |||||||||
column · Integer32 (0..65535) · read-create · current A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System. Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggPartnerOperKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.10 | LacpKey | RC | 1 | |||||||||
column · LacpKey · read-create · current The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read- write value. If the aggregation is manually configured, this Key value will be a value assigned by the local System. | |||||||||||||
| CalclnkaggAggSize | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.11 | Integer32 (1..16) | RC | 2 | |||||||||
column · Integer32 (1..16) · read-create · current Maximum number of links that could be attached to this aggregator, This nominator is mandatory and is a required field in order to create a row in this table | |||||||||||||
| CalclnkaggAggNumber | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.12 | Integer32 (0..253) | RO | 1 | |||||||||
column · Integer32 (0..253) · read-only · current Aggreagtor number reference the aggregate dedicated from the ifindex at the creation. Higher range supported only by high end products. | |||||||||||||
| CalclnkaggAggDescr | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.13 | SnmpAdminString (SIZE (0..255)) | RO | Dynamic Aggregate Number 1 ref 40000001 size 2 | |||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current Description is a human readable string which describes of the type of aggregator object OMNICHANNEL / LACP etc | |||||||||||||
| CalclnkaggAggName | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.14 | SnmpAdminString (SIZE (0..255)) | RC | rox-timi5-1 <-> rox-timi5-10 | |||||||||
column · SnmpAdminString (SIZE (0..255)) · read-create · current Name of the aggregator is human readable string manually given by the operator | |||||||||||||
| CalclnkaggAggLacpType | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.15 | LacpType | RC | 1 | |||||||||
column · LacpType · read-create · current Aggreagtor set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the aggregator, cannot be modified later Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggAdminState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.16 | INTEGER | RC | enable(1) | |||||||||
column · INTEGER · read-create · current status assigned by the admnistrator. The activation of the aggregator is managed by this nominator
Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggOperState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.17 | INTEGER | RO | up(1) | |||||||||
column · INTEGER · read-only · current Operational status of the aggregator with proprietary values operational state from iftable corresponds to UP state
| |||||||||||||
| CalclnkaggAggNbrSelectedPorts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.18 | Integer32 (0..16) | RO | 2 | |||||||||
| CalclnkaggAggNbrAttachedPorts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.19 | Integer32 (0..16) | RO | 2 | |||||||||
| CalclnkaggAggPrimaryPortIndex | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.20 | InterfaceIndex | RO | 1051 | |||||||||
column · InterfaceIndex · read-only · current the ifindex of the primary port in the aggregator used to send BPDUs and flooding frames Zeo indicates no primary port is available . | |||||||||||||
| CalclnkaggAggPrimaryPortPosition | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.21 | Integer32 (-1..15) | RO | 50 | |||||||||
| CalclnkaggAggRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.22 | RowStatus | RC | 1 | |||||||||
column · RowStatus · read-create · current This object is the RowStatus (locking flag) for creating or deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType and must be supplied in the request to create a row, it is a required field. | |||||||||||||
| CalclnkaggAggMcLagType | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.23 | McLagType | RC | 0 | |||||||||
column · McLagType · read-create · current Aggregator set with MultiChassis mode or not mandatory at the creation of the aggregator, cannot be modified later Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggPortSelectionHash | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.24 | INTEGER | RC | sourceDestinationIp(6) | |||||||||
column · INTEGER · read-create · current Port Selection Criteria used to hash one port of the aggregate for a given traffic flow
Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggWTRTimer | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.25 | Integer32 (0..12) | RC | 0 | |||||||||
column · Integer32 (0..12) · read-create · current This sets the WTR timer value in minutes for an aggregate. The default value is 0 minute. The Default means the WTR is Disabled. When an link comes up, If there is no WTR enabled for this linkagg, bring up the link. If there is a WTR configured for this linkagg, 1.if there are no other links attached to the same linkagg, bypass the WTR and bring up the link immediately. 2. If there are links attached to the same linkagg, start the WTR when the WTR expires,bring up the link.
Example values from LibreNMS test devices
| |||||||||||||
| CalclnkaggAggLoopbackState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.26 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Defines the Loopback type, Applicable only to static LinkAggs. Dynamic LinkAggs must use disabled valye only.
| |||||||||||||
| TalclnkaggAggPortListTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2 | NA | |||||||||||
table · not-accessible · current A table that contains a list of all the ports associated with each Aggregator. | |||||||||||||
| RalclnkaggAggPortListEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2.1 | NA | |||||||||||
row · not-accessible · current A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator.
| |||||||||||||
| CalclnkaggAggPortListPorts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2.1.1 | PortList | RO | ||||||||||
column · PortList · read-only · current The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation. | |||||||||||||
| TalclnkaggAggIdIfIndexTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3 | NA | |||||||||||
table · not-accessible · current Each row in this table represents the link aggregation aggregate id's corresponding ifIndex. | |||||||||||||
| RalclnkaggAggIdIfIndexEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1 | NA | |||||||||||
row · not-accessible · current Parameters for link aggregation aggregate id relationship to ifIndex.
| |||||||||||||
| CalclnkaggIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current IfIndex for the given Aggregate ID | |||||||||||||
| CalclnkaggAggId | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1.2 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current The aggregate id number. | |||||||||||||
| TalclnkaggAggIdAccountTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4 | NA | |||||||||||
table · not-accessible · current Rows in this table represents account statistics of one aggregation. | |||||||||||||
| RalclnkaggAggIdAccountEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1 | NA | |||||||||||
| CalcRxUndersize | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Undersize packet received | |||||||||||||
| CalcTxUndersize | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Undersize packet sent | |||||||||||||
| CalcRxOversize | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current oversize packet received | |||||||||||||
| CalcTxOversize | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current oversize packet sent | |||||||||||||
| CalcRxPackets64 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 64 received | |||||||||||||
| CalcRxPackets127 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 64-127 received | |||||||||||||
| CalcRxPackets255 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 128-255 received | |||||||||||||
| CalcRxPackets511 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 256-511 received | |||||||||||||
| CalcRxPackets1023 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 512-1023 received | |||||||||||||
| CalcRxPackets1518 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 1024-1518 received | |||||||||||||
| CalcRxPackets4095 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 1518-4095 received | |||||||||||||
| CalcRxPackets9216 | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.12 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current packet size 4096-Max received | |||||||||||||
| CalcRxJabberFrames | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.4.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Jabber frames received | |||||||||||||
| TalclnkaggAggIdCounterTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5 | NA | |||||||||||
table · not-accessible · current Rows in this table represents counter statistics of one aggregation. | |||||||||||||
| RalclnkaggAggIdCounterEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1 | NA | |||||||||||
| CalcInOctets | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Octets received | |||||||||||||
| CalcOutOctets | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Octets sent | |||||||||||||
| CalcInUcastPkts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current unicast packet received | |||||||||||||
| CalcOutUcastPkts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current unicast packet sent | |||||||||||||
| CalcInMcastPkts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current multicast packet received | |||||||||||||
| CalcOutMcastPkts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current multicast packet sent | |||||||||||||
| CalcInBcastPkts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current broadcast packet received | |||||||||||||
| CalcOutBcastPkts | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current broadcast packet sent | |||||||||||||
| CalcInPauseFrames | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current pause frames received | |||||||||||||
| CalcOutPauseFrames | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.5.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current pause frames sent | |||||||||||||
| TalclnkaggAggIdCounterErrTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.6 | NA | |||||||||||
table · not-accessible · current Rows in this table represents counter error statistics of one aggregation. | |||||||||||||
| RalclnkaggAggIdCounterErrEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.6.1 | NA | |||||||||||
| CalcAlignmentsErrors | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.6.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Alignments error | |||||||||||||
| CalcFCSErrors | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.6.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Alignments error | |||||||||||||
| CalcIfInErrors | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.6.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current interface rceive error | |||||||||||||
| CalcIfOutErrors | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.6.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current interface send error | |||||||||||||
| TalclnkaggAggIdTrafficTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.7 | NA | |||||||||||
table · not-accessible · current Rows in this table represents traffic count statistics of one aggregation. | |||||||||||||
| RalclnkaggAggIdTrafficEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.7.1 | NA | |||||||||||
| CalcInputPackets | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.7.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current InputPacket | |||||||||||||
| CalcInputBytes | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.7.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Input bytes | |||||||||||||
| CalcOutputPackets | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.7.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current InputPacket | |||||||||||||
| CalcOutputBytes | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.7.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current output bytes | |||||||||||||
| NalclnkaggAggPort | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2 | ||||||||||||
| TalclnkaggAggPortTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1 | NA | |||||||||||
table · not-accessible · current A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port. | |||||||||||||
| RalclnkaggAggPortEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1 | NA | |||||||||||
row · not-accessible · current A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device. | |||||||||||||
| CalclnkaggAggPortIndex | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex of the port | |||||||||||||
| CalclnkaggAggPortActorSystemPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.2 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current A 2-octet read-write value used to define the priority value associated with the Actor's System ID. | |||||||||||||
| CalclnkaggAggPortActorSystemID | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.3 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port. | |||||||||||||
| CalclnkaggAggPortActorAdminKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.4 | LacpKey | RC | ||||||||||
column · LacpKey · read-create · current The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance. | |||||||||||||
| CalclnkaggAggPortActorOperKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.5 | LacpKey | RO | ||||||||||
column · LacpKey · read-only · current The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance. | |||||||||||||
| CalclnkaggAggPortPartnerAdminSystemPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.6 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current A 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. | |||||||||||||
| CalclnkaggAggPortPartnerOperSystemPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.7 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner. | |||||||||||||
| CalclnkaggAggPortPartnerAdminSystemID | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.8 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current A 6-octet read-write MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. | |||||||||||||
| CalclnkaggAggPortPartnerOperSystemID | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.9 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner. | |||||||||||||
| CalclnkaggAggPortPartnerAdminKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.10 | LacpKey | RC | ||||||||||
column · LacpKey · read-create · current The current administrative value of the Key for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. | |||||||||||||
| CalclnkaggAggPortPartnerOperKey | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.11 | LacpKey | RO | ||||||||||
column · LacpKey · read-only · current The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value. | |||||||||||||
| CalclnkaggAggPortSelectedAggID | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.12 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only. | |||||||||||||
| CalclnkaggAggPortAttachedAggID | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.13 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only. | |||||||||||||
| CalclnkaggAggPortActorPort | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.14 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only. | |||||||||||||
| CalclnkaggAggPortActorPortPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.15 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current The priority value assigned to this Aggregation Port. This 16-bit value is read-write. | |||||||||||||
| CalclnkaggAggPortPartnerAdminPort | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.16 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current The current administrative value of the port number for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. | |||||||||||||
| CalclnkaggAggPortPartnerOperPort | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.17 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only. | |||||||||||||
| CalclnkaggAggPortPartnerAdminPortPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.18 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation. | |||||||||||||
| CalclnkaggAggPortPartnerOperPortPriority | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.19 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only. | |||||||||||||
| CalclnkaggAggPortActorAdminState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.20 | LacpState | RC | ||||||||||
column · LacpState · read-create · current A string of 8 bits, corresponding to the administrative values of Actor_State () as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-write. | |||||||||||||
| CalclnkaggAggPortActorOperState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.21 | LacpState | RO | ||||||||||
column · LacpState · read-only · current A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in . This attribute value is read-only. | |||||||||||||
| CalclnkaggAggPortPartnerAdminState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.22 | LacpState | RC | ||||||||||
column · LacpState · read-create · current A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in . This attribute value is read-write. The assigned value is used in order to achieve manually configured aggregation. | |||||||||||||
| CalclnkaggAggPortPartnerOperState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.23 | LacpState | RO | ||||||||||
column · LacpState · read-only · current A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in . In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only. | |||||||||||||
| CalclnkaggAggPortSelectedAggNumber | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.24 | Integer32 (-1..253) | RC | ||||||||||
column · Integer32 (-1..253) · read-create · current Aggreagtor number to attach a port at its creation mandatory and only used for the Omnichhannel not allowed for LACP (-1) value displayed when it is not significant. Higher range supported only by high end products. | |||||||||||||
| CalclnkaggAggPortGlobalPortNumber | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.25 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current Physical reference of the port | |||||||||||||
| CalclnkaggAggPortAdminState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.26 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current status assigned by the admnistrator. port activation done by iftable this nominator is equivalent to ifAdminStatus in ifTable
| |||||||||||||
| CalclnkaggAggPortOperState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.27 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operational status of the port regarding the traffic
| |||||||||||||
| CalclnkaggAggPortState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.28 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current aggregation status of the port
| |||||||||||||
| CalclnkaggAggPortLinkState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.29 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operational status of the link
| |||||||||||||
| CalclnkaggAggPortPrimary | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.30 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current port primary or not
| |||||||||||||
| CalclnkaggAggPortLacpType | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.31 | LacpType | RC | ||||||||||
column · LacpType · read-create · current Port set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the port | |||||||||||||
| CalclnkaggAggPortRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.32 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is the RowStatus (locking flag) for creating or deleting aggregatable port objects. alclnkaggAggPortActorAdminKey and alclnkaggAggPortSlotSlice must be supplied in the request to create a row, it is a required field. | |||||||||||||
| CalclnkaggAggPortMcLagType | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.33 | McLagType | RO | ||||||||||
column · McLagType · read-only · current Port set with McLag mode or not | |||||||||||||
| TalclnkaggAggPortStatsTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2 | NA | |||||||||||
table · not-accessible · current A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port. | |||||||||||||
| RalclnkaggAggPortStatsEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1 | NA | |||||||||||
row · not-accessible · current A list of Link Aggregation Control Protocol statistics for each port on this device. | |||||||||||||
| CalclnkaggAggPortStatsLACPDUsRx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of valid LACPDUs received on this Aggregation Port. This value is read-only. | |||||||||||||
| CalclnkaggAggPortStatsMarkerPDUsRx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of valid Marker PDUs received on this Aggregation Port. This value is read-only. | |||||||||||||
| CalclnkaggAggPortStatsMarkerResponsePDUsRx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only. | |||||||||||||
| CalclnkaggAggPortStatsUnknownRx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of frames received that either: - carry the Slow Protocols Ethernet Type value (), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (), but do not carry the Slow Protocols Ethernet Type. This value is read-only. | |||||||||||||
| CalclnkaggAggPortStatsIllegalRx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of frames received that carry the Slow Protocols Ethernet Type value (), but contain a badly formed PDU or an illegal value of Protocol Subtype (). This value is read-only. | |||||||||||||
| CalclnkaggAggPortStatsLACPDUsTx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of LACPDUs transmitted on this Aggregation Port. This value is read-only. | |||||||||||||
| CalclnkaggAggPortStatsMarkerPDUsTx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only. | |||||||||||||
| CalclnkaggAggPortStatsMarkerResponsePDUsTx | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only. | |||||||||||||
| TalclnkaggAggPortDebugTable | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3 | NA | |||||||||||
table · not-accessible · current A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port. | |||||||||||||
| RalclnkaggAggPortDebugEntry | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1 | NA | |||||||||||
| CalclnkaggAggPortDebugRxState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine. is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or 'portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only.
| |||||||||||||
| CalclnkaggAggPortDebugLastRxTime | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.2 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugMuxState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
| |||||||||||||
| CalclnkaggAggPortDebugMuxReason | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.4 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugActorChurnState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.5 | ChurnState | RO | ||||||||||
column · ChurnState · read-only · current The state of the Actor Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugPartnerChurnState | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.6 | ChurnState | RO | ||||||||||
column · ChurnState · read-only · current The state of the Partner Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and 'churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugActorChurnCount | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugPartnerChurnCount | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugActorSyncTransitionCount | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Count of the number of times the Actor's Mux state machine () has entered the IN_SYNC state. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugPartnerSyncTransitionCount | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.10 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Count of the number of times the Partner's Mux state machine () has entered the IN_SYNC state. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugActorChangeCount | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only. | |||||||||||||
| CalclnkaggAggPortDebugPartnerChangeCount | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Count of the number of times the Partner's perception of the LAG ID (see ) for this Aggregation Port has changed. This value is read-only. | |||||||||||||
| SalclnkaggTablesLastChanged | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.3 | TimeTicks | RO | ||||||||||
scalar · TimeTicks · read-only · current This object indicates the time of the most recent change to the alclnkaggAggTable, alclnkaggAggPortListTable, or alclnkaggAggPortTable. | |||||||||||||
| NlnkaggNotificationVars | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4 | ||||||||||||
| StraplnkaggAggId | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4.1 | Integer32 (0..253) | AN | ||||||||||
scalar · Integer32 (0..253) · accessible-for-notify · current Index Value of Link Aggregation group . | |||||||||||||
| StraplnkaggPortIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4.2 | Integer32 (1..2147483647) | AN | ||||||||||
scalar · Integer32 (1..2147483647) · accessible-for-notify · current Port of Link Aggregate group . | |||||||||||||
| NalclnkaggAggConfig | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5 | ||||||||||||
| SalclnkAggLocalRangeOperMin | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.1 | Integer32 (-1..253) | RO | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-only · obsolete Minimum value of aggregate currently used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none. | |||||||||||||
| SalclnkAggLocalRangeOperMax | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.2 | Integer32 (-1..253) | RO | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-only · obsolete Maximum value of aggregate currently used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none. | |||||||||||||
| SalclnkAggLocalRangeConfiguredMin | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.3 | Integer32 (-1..253) | RW | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-write · obsolete Minimum value of aggregate configured to be used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none. | |||||||||||||
| SalclnkAggLocalRangeConfiguredMax | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.4 | Integer32 (-1..253) | RW | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-write · obsolete Maximum value of aggregate configured to be used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none. OS6360, OS6465 and OS6560 support LAG values 0..32 only. LAG values 128..253 are valid only for OS9900. | |||||||||||||
| SalclnkAggPeerRangeOperMin | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.5 | Integer32 (-1..253) | RO | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-only · obsolete Minimum value of aggregate currently used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| SalclnkAggPeerRangeOperMax | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.6 | Integer32 (-1..253) | RO | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-only · obsolete Maximum value of aggregate currently used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| SalclnkAggPeerRangeConfiguredMin | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.7 | Integer32 (-1..253) | RW | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-write · obsolete Minimum value of aggregate configured to be used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| SalclnkAggPeerRangeConfiguredMax | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.8 | Integer32 (-1..253) | RW | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-write · obsolete Maximum value of aggregate configured to be used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| SalclnkAggMcLagRangeOperMin | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.9 | Integer32 (-1..253) | RO | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-only · obsolete Minimum value of aggregate currently used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| SalclnkAggMcLagRangeOperMax | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.10 | Integer32 (-1..253) | RO | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-only · obsolete Maximum value of aggregate currently used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| SalclnkAggMcLagRangeConfiguredMin | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.11 | Integer32 (-1..253) | RW | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-write · obsolete Minimum value of aggregate configured to be used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| SalclnkAggMcLagRangeConfiguredMax | 1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.12 | Integer32 (-1..253) | RW | obsolete | |||||||||
scalar · Integer32 (-1..253) · read-write · obsolete Maximum value of aggregate configured to be used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is from 0 to 253. Value -1 indicated none or multi-chassis feature is not enabled. | |||||||||||||
| NalcatelIND1LAGMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2 | ||||||||||||
node · current Branch For Link Aggregation Subsystem Conformance Information. | |||||||||||||
| NalcatelIND1LAGMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1 | ||||||||||||
node · current Branch For Link Aggregation Subsystem Units Of Conformance. | |||||||||||||
| GalclnkaggAggGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.1 | ||||||||||||
group · current A collection of objects providing information about an aggregation.
| |||||||||||||
| GalclnkaggAggPortListGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.2 | ||||||||||||
group · current A collection of objects providing information about every port in an aggregation.
| |||||||||||||
| GalclnkaggAggPortGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.3 | ||||||||||||
group · current A collection of objects providing information about every port in an aggregation.
| |||||||||||||
| GalclnkaggAggPortStatsGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.4 | ||||||||||||
group · current A collection of objects providing information about every port in an aggregation. | |||||||||||||
| GalclnkaggAggPortDebugGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.5 | ||||||||||||
group · current A collection of objects providing debug information about. every aggregated port.
| |||||||||||||
| GalclnkaggTablesLastChangedGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.6 | ||||||||||||
group · current A collection of objects providing information about the time of changes to the configuration of aggregations and their ports.
| |||||||||||||
| GlnkaggNotificationVarsGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.7 | ||||||||||||
group · current Collection of objects which appear only in notifications.
| |||||||||||||
| GlnkaggTrapsGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.8 | ||||||||||||
group · current Collection of Traps for Link Aggregation . | |||||||||||||
| GalclnkaggAggConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.9 | ||||||||||||
group · current A collection of objects providing information about ranges allowed aggregate number values.
| |||||||||||||
| GalclnkaggAggIdAccountGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.10 | ||||||||||||
group · current A collection of objects providing information about aggregate account info | |||||||||||||
| GalclnkaggAggIdCounterGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.11 | ||||||||||||
group · current A collection of objects providing information about aggregate counter info | |||||||||||||
| GalclnkaggAggIdCounterErrGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.12 | ||||||||||||
group · current A collection of objects providing information about aggregate counter error info | |||||||||||||
| GalclnkaggAggIdTrafficGroup | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1.13 | ||||||||||||
group · current A collection of objects providing information about aggregate traffic info | |||||||||||||
| NalcatelIND1LAGMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.2 | ||||||||||||
node · current Branch For Link Aggregation Subsystem Compliance Statements. | |||||||||||||
| MalclnkaggAggCompliance | 1.3.6.1.4.1.6486.801.1.2.1.13.1.2.2.1 | ||||||||||||
compliance · current The compliance statement for device support of Link Aggregation.
| |||||||||||||
Textual conventions
LacpTypeINTEGERlacpOff(0)lacpOn(1)The object supports or not (Omnichannel) the LACP protocol .
McLagTypeINTEGERmcLagOff(0)mcLagOn(1)The object supports or not the Multi Chassis Link aggregation .
Traps / Notifications
- lnkaggAggDown
1.3.6.1.4.1.6486.801.1.2.1.13.1.0.2 - lnkaggAggUp
1.3.6.1.4.1.6486.801.1.2.1.13.1.0.1 - lnkaggPortJoin
1.3.6.1.4.1.6486.801.1.2.1.13.1.0.3 - lnkaggPortLeave
1.3.6.1.4.1.6486.801.1.2.1.13.1.0.4 - lnkaggPortRemove
1.3.6.1.4.1.6486.801.1.2.1.13.1.0.5
Groups and compliance
- alclnkaggAggCompliance
- alclnkaggAggConfigGroup
- alclnkaggAggGroup
- alclnkaggAggIdAccountGroup
- alclnkaggAggIdCounterErrGroup
- alclnkaggAggIdCounterGroup
- alclnkaggAggIdTrafficGroup
- alclnkaggAggPortDebugGroup
- alclnkaggAggPortGroup
- alclnkaggAggPortListGroup
- alclnkaggAggPortStatsGroup
- alclnkaggTablesLastChangedGroup
- lnkaggNotificationVarsGroup
- lnkaggTrapsGroup