ALCATEL-IND1-DVMRP-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This MIB contains management information for Coronado Layer
3 Hardware Routing Engine (HRE) management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-DVMRP-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-DVMRP-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.10.7.1Imports
| ALCATEL-IND1-BASE | routingIND1Dvmrp |
|---|---|
| DVMRP-STD-MIB | dvmrpInterfaceEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1DVMRPMIB | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This MIB contains management information for Coronado Layer
3 Hardware Routing Engine (HRE) management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1DVMRPMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1 | |||
| NalaDvmrpGlobalConfig | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1 | |||
| SalaDvmrpAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Administratively enables/disables the DVMRP protocol on this router.
| ||||
| SalaDvmrpRouteReportInterval | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.2 | Integer32 (10..2000) | RW | |
scalar · Integer32 (10..2000) · read-write · current The Route Report Interval determines how often a router will send its complete routing tables to neighboring routers running DVMRP.
| ||||
| SalaDvmrpFlashUpdateInterval | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.3 | Integer32 (5..86400) | RW | |
scalar · Integer32 (5..86400) · read-write · current The minimum Flash Update Interval defines how often routing table change messages are sent to neighboring DVMRP routers. Since these messages are sent between the transmission of complete routing tables, the flash update interval value must be shorter than that of the route report interval.
| ||||
| SalaDvmrpNeighborTimeout | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.4 | Integer32 (5..86400) | RW | |
scalar · Integer32 (5..86400) · read-write · current The Neighbor Timeout value specifies how long, without any activity from a neighboring DVMRP router, the router will wait before assuming that the inactive router is down.
| ||||
| SalaDvmrpRouteExpirationTimeout | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.5 | Integer32 (20..4000) | RW | |
scalar · Integer32 (20..4000) · read-write · current The Route Expiration Timeout value specifies how long the router will wait before aging out a route. When this value expires, the route is advertised as inactive until either it's activity resumes or it is deleted.
| ||||
| SalaDvmrpRouteHoldDown | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.6 | Integer32 (1..86400) | RW | |
scalar · Integer32 (1..86400) · read-write · current Specifies the time during which DVMRP routes are kept in a hold-down state. A hold-down state refers to the time that a route to an inactive network continues to be advertised.
| ||||
| SalaDvmrpNeighborProbeInterval | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.7 | Integer32 (5..30) | RW | |
scalar · Integer32 (5..30) · read-write · current The Neighbor Probe Interval value specifies how often probes will be transmitted to those interfaces with attached DVMRP neighbors.
| ||||
| SalaDvmrpPruneLifetime | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.8 | Integer32 (180..86400) | RW | |
scalar · Integer32 (180..86400) · read-write · current The Prune Lifetime value defines the value whereby a source-rooted multicast tree will be pruned.
| ||||
| SalaDvmrpPruneRetransmission | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.9 | Integer32 (30..86400) | RW | |
scalar · Integer32 (30..86400) · read-write · current The Prune Packet Retransmission value is the duration of time that the router will wait, if it continues to receive unwanted multicast traffic, before retransmitting a prune message.
| ||||
| SalaDvmrpGraftRetransmission | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.10 | Integer32 (5..86400) | RW | |
scalar · Integer32 (5..86400) · read-write · current The Graft message Retransmission value defines the duration of time that the router will wait before retransmitting a graft message, if it has not already received an acknowledgement from its neighbor.
| ||||
| SalaDvmrpInitNbrAsSubord | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.11 | TruthValue | RW | |
scalar · TruthValue · read-write · current The value true(1) indicates neighbors, on initial discovery, are considered subordinate. This means traffic may be resumed slightly quicker on network disruptions. But, if the neighbor has trouble handling huge initial blasts of traffic, it may be wise to wait until route reports have been exchanged and the neighbor has requested dependency, before forwarding traffic. | ||||
| SalaDvmrpBfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enables/Disables Bfd for DVMRP Protocol.
| ||||
| SalaDvmrpBfdAllInterfaceStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current Enables/Disables Bfd for all DVMRP interfaces.
| ||||
| SalaDvmrpMbrOperStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current Whether MBR is currently enabled/disabled for DVMRP.
| ||||
| TalaDvmrpTunnelXIfTable | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2 | NA | ||
table · not-accessible · current A list of attributes that are associated with the internal assigned tunnel index when a DVMRP tunnel is created. This table contains additional objects that are not present in the tunnelMIB tunnelIfTable. | ||||
| RalaDvmrpTunnelXIfEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1 | NA | ||
row · not-accessible · current An entry containing additional attributes associated with a DVMRP tunnel.
| ||||
| CalaDvmrpTunnelIndex | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The tunnel index of the DVMRP tunnel. | ||||
| CalaDvmrpLocalIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The interface index of the local end-point of the DVMRP tunnel. | ||||
| TalaDvmrpIfAugTable | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4 | NA | ||
table · not-accessible · current Expansion for Dvmrp Intf table. | ||||
| RalaDvmrpIfAugEntry | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1 | NA | ||
| CalaDvmrpIfBfdStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object enables/disables BFD for this DVMRP interface.
| ||||
| CalaDvmrpIfMbrDefaultInfoStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This object enables/disables DVMRP to advertise the default route on this interface. This object is only applicable if the router is operating as a Multicast Border Router.
| ||||
| NalcatelIND1DVMRPMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2 | |||
| NalcatelIND1DVMRPMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1 | |||
| MalaDvmrpCompliance | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1.1 | |||
compliance · current The compliance statement for routers running DVMRP and implementing the ALCATEL-IND1-DVMRP MIB. | ||||
| NalcatelIND1DVMRPMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2 | |||
| GalaDvmrpConfigMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.1 | |||
group · current A collection of objects to support the management of global configuration parameters on DVMRP routers.
| ||||
| GalaDvmrpTunnelXIfMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.2 | |||
group · current These objects are required to provide additional information about configured DVMRP tunnels not found in the standard tunnel MIB.
| ||||
| GalaDvmrpIfConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.3 | |||
group · current These objects are required to provide additional information about configured DVMRP interfaces not found in the standard tunnel MIB. | ||||