ALCATEL-IND1-DHL-MIB
Alcatel-Lucent EnterpriseThe Dual Homed Link uses two links with a number of VLANs split between
them from the common pool of vlans, in such a way that any vlan is not
associated with both of the redundant links at the same time to avoid formation
of loops and also VLANs are still connected to the core when one link fails.
STP is disabled on both the DHL links implicitly.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-DHL-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-DHL-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.65.1Imports
| ALCATEL-IND1-BASE | softentIND1DHL |
|---|---|
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1DHLMIB | 1.3.6.1.4.1.6486.801.1.2.1.65.1 | |||
identity The Dual Homed Link uses two links with a number of VLANs split between
them from the common pool of vlans, in such a way that any vlan is not
associated with both of the redundant links at the same time to avoid formation
of loops and also VLANs are still connected to the core when one link fails.
STP is disabled on both the DHL links implicitly.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1DHLMIBNotifications | 1.3.6.1.4.1.6486.801.1.2.1.65.1.0 | |||
node · current Branch For DHL Subsystem Notifications. | ||||
| !alaDHLVlanMoveTrap | 1.3.6.1.4.1.6486.801.1.2.1.65.1.0.1 | |||
notification · current When linkA or linkB goes down or becomes up and both the ports are are part of some vlan-map, then this trap is sent to the Management Entity, with the DHL port information. | ||||
| NalcatelIND1DHLMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1 | |||
node · current Branch For DHL Subsystem Managed Objects. | ||||
| NalaDHLSessionConfig | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1 | |||
| TalaDHLSessionTable | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1 | NA | ||
table · not-accessible · current Defines the DHL control table for providing the capability of performing DHL Active-Active operations. | ||||
| RalaDHLSessionEntry | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1 | NA | ||
row · not-accessible · current An entry in this table containing information of a single DHL (Active-Active) session.
| ||||
| CalaDHLSessionIndex | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.1 | Integer32 (1..1000) | NA | |
column · Integer32 (1..1000) · not-accessible · current DHL session Index identify the entries in the table. we are currently supporting one session. | ||||
| CalaDHLSessionDescr | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.2 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current User provided description string for the DHL session. | ||||
| CalaDHLSessionAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates whether the admin state of DHL session is ENBLED or DISABLED.
| ||||
| CalaDHLSessionOperStatus | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the operational state of DHL session is UP or DOWN.
| ||||
| CalaDHLSessionPreemptionTime | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.5 | Integer32 (10..600) | RC | |
column · Integer32 (10..600) · read-create · current Interval, in seconds, which defines the pre-emption time used for delay in moving back the vlan to their original link.
| ||||
| CalaDHLSessionAdminMacFlushing | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Value for mac-flushing technique used for the specified DHL session.
| ||||
| CalaDHLSessionActiveMacFlushing | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Operational state of mac-flushing technique used for the specified DHL session.
| ||||
| CalaDHLSessionRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.1.1.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object allows entries to be created and deleted in the table. | ||||
| NalaDHLLinksConfig | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2 | |||
| TalaDHLLinksTable | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1 | NA | ||
table · not-accessible · current Defines the DHLG links table for a DHL session. this table allows the capability to add or remove the DHL links from the DHL session. | ||||
| RalaDHLLinksEntry | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1 | NA | ||
row · not-accessible · current An entry in this table, contains information of the configured port/ling-aggs that participate in a DHL session. | ||||
| CalaDHLLinkslinkA | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The physical identification number for DHL linkA. it can be a physical port or a logical port | ||||
| CalaDHLLinkslinkB | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.2 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The physical identification number for DHL linkB. it can be a physical port or a logical port | ||||
| CalaDHLLinkslinkAOperStatus | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the operational state of DHL linkA is UP or DOWN.
| ||||
| CalaDHLLinkslinkBOperStatus | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the operational state of DHL linkB is UP or DOWN.
| ||||
| CalaDHLLinksRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.2.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object allows entries to be created and deleted in the table. | ||||
| NalaDHLVpa | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3 | |||
| TalaDHLVpaTable | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1 | NA | ||
table · not-accessible · current Used to display the vlan membership of the DHL links. this table is also used to display whether a vlan is protected or unprotected and operational on which DHL link. | ||||
| RalaDHLVpaEntry | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1 | NA | ||
row · not-accessible · current An entry in this table, contains VPA information of of each link per DHL session. | ||||
| CalaDHLVpalink | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Indicates the vlan is member of linkA or linkB. the value is physical identification number for DHL link. it can be a physical port or a logical port | ||||
| CalaDHLVpaVlan | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1.2 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The vlan number where the DHL linkA or linkB is member of it. | ||||
| CalaDHLVpaVlanType | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current indicates whether the vlan is protected or un protected where one of the DHL link is member of it.
| ||||
| CalaDHLVpaActiveLink | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.3.1.1.4 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current indicates the DHL link on which the vlan is operational. If the value is zero that means the vlan is not operational and it's unprotected. | ||||
| NalaDHLVlanMap | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4 | |||
| TalaDHLVlanMapTable | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1 | NA | ||
table · not-accessible · current Defines the DHL vlan map for linkB. this indicates the vlans that will be operational on DHL linkB from the common pool of vlans between DHL linkA and linkB and by default the vlans that are not specified by this table are operational on DHL linkA. | ||||
| RalaDHLVlanMapEntry | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1 | NA | ||
row · not-accessible · current An entry in this table, contains the vlan-map for linkB in DHL session. | ||||
| CalaDHLVlanMapVlanStart | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The VLAN number identifying the first vlan id in the range. And if start and end is same then it will be treated a one vlan id. | ||||
| CalaDHLVlanMapVlanEnd | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1.2 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The VLAN number identifying the end vlan id in the range. And if start and end is same then it will be treated a one vlan id. | ||||
| CalaDHLVlanMapRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.4.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object allows entries to be created and deleted in the table. | ||||
| NalaDHLTrapsObj | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5 | |||
| SalaDHLSessionID | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current This object specifies the DHL Session ID for which alaDHLVlanMoveTrap needs to be sent to the Management Entity. | ||||
| SalaDHLPortFrom | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.2 | InterfaceIndex | AN | |
scalar · InterfaceIndex · accessible-for-notify · current This object specifies the port, either linkA or linkB, from which vlan-mapped vlans have joined to other port due to linkUp or linkDown as specified by alaDHLVlanMoveReason. | ||||
| SalaDHLPortTo | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.3 | InterfaceIndex | AN | |
scalar · InterfaceIndex · accessible-for-notify · current This object specifies the port, either linkA or linkB, to which
vlan-mapped vlans have joined from other port due to linkUp or linkDown
as specified by alaDHLVlanMoveReason. | ||||
| SalaDHLVlanMoveReason | 1.3.6.1.4.1.6486.801.1.2.1.65.1.1.5.4 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current This object specifies the reason for Vlan Movement from one port to another port.
| ||||
| NalcatelIND1DHLMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2 | |||
node · current Branch for DHL Module MIB Subsystem Conformance Information. | ||||
| NalcatelIND1DHLMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1 | |||
node · current Branch for DHL Module MIB Subsystem Units of Conformance. | ||||
| GalaDHLSessionGroup | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.1 | |||
group · current Collection of objects for management of a single DHL (Active-Active) session. | ||||
| GalaDHLLinksGroup | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.2 | |||
group · current Collection of objects for information of the configured port/ling-aggs that participate in a DHL session. | ||||
| GalaDHLVpaGroup | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.3 | |||
group · current Collection of objects providing VPA information of each link per DHL session.
| ||||
| GalaDHLVlanMapGroup | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.4 | |||
group · current Collection of objects providing the vlan-map for linkB in DHL session.
| ||||
| GalaDHLNotificationObjectGroup | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.5 | |||
group · current Collection of objects providing the information regarding DHL Trap. | ||||
| GalaDHLNotificationGroup | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.1.6 | |||
| NalcatelIND1DHLMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.2 | |||
node · current Branch for DHL Module MIB Subsystem Compliance Statements. | ||||
| MalcatelIND1DHLMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.65.1.2.2.1 | |||
compliance · current Compliance statement for DHL. | ||||
Traps / Notifications
- alaDHLVlanMoveTrap
1.3.6.1.4.1.6486.801.1.2.1.65.1.0.1