ALCATEL-IND1-DCBX-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-DCBX-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-DCBX-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.72.1Imports
| ALCATEL-IND1-BASE | softentIND1Dcbx |
|---|---|
| ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB | VfcEnableState |
| IEEE8021-TC-MIB | IEEE8021PriorityValue |
| LLDP-EXT-DOT1-V2-MIB | LldpXdot1dcbxAppProtocol, LldpXdot1dcbxAppSelector, LldpXdot1dcbxSupportedCapacity, LldpXdot1dcbxTrafficClassBandwidthValue, LldpXdot1dcbxTrafficClassValue, LldpXdot1dcbxTrafficSelectionAlgorithm, lldpXdot1dcbxAdminApplicationPriorityAEProtocol, lldpXdot1dcbxAdminApplicationPriorityAESelector |
| LLDP-V2-MIB | lldpV2LocPortIfIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1DcbxMIB | 1.3.6.1.4.1.6486.801.1.2.1.72.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1DcbxMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1 | |||
node · current Branch For VFC-DCBX Subsystem Managed Objects. | ||||
| NalaDcbxConfig | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1 | |||
| TalaDcbxDCProfileTable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1 | NA | ||
table · not-accessible · current A table of Data Center profiles. | ||||
| RalaDcbxDCProfileEntry | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1 | NA | ||
| CalaDcbxDCPId | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.1 | Unsigned32 (1..128) | NA | |
column · Unsigned32 (1..128) · not-accessible · current Identifier of DCB profile. | ||||
| CalaDcbxDCPName | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.2 | SnmpAdminString (SIZE (0..32)) | RC | |
column · SnmpAdminString (SIZE (0..32)) · read-create · current Name of DCB profile. | ||||
| CalaDcbxDCPETSTrafficClassesSupported | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.3 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes supported. | ||||
| CalaDcbxDCPPFCCap | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.4 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. | ||||
| CalaDcbxDCPPriorityTCMap | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.5 | DcbxPriorityTCMap | RO | |
column · DcbxPriorityTCMap · read-only · current Indicates the priority TC map. All 8 priorities are assigned a TC. | ||||
| CalaDcbxDCPTemplateDCPId | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.6 | Unsigned32 (1..128) | RC | |
column · Unsigned32 (1..128) · read-create · current Identifier of Template DCB profile. Used when creating a new profile. The template profile values will be copied to the new profile. | ||||
| CalaDcbxDCPTemplateDCPName | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.7 | SnmpAdminString (SIZE (0..32)) | RC | |
column · SnmpAdminString (SIZE (0..32)) · read-create · current Name of Template DCB profile. Used when creating a new profile. The template profile values will be copied to the new profile. | ||||
| CalaDcbxDCPTCsPresent | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.8 | DcbxTCsPresent | RC | |
column · DcbxTCsPresent · read-create · current Represents the traffic classes present in this particular profile. Can be used to change the TC numbering. For example, a profile with TCs numbered 0, 1, 2, can be changed to 1, 5, 7. The numbering is assigned in increasing order. The number of TCs specified must match the current number of TCs in the profile. | ||||
| CalaDcbxDCP8023xPauseReady | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.9 | VfcEnableState | RC | |
column · VfcEnableState · read-create · current Makes a profile pause-ready. Can only be set during profile creation. When enabled, the PFC is lossy for all traffic classes in the profile and they cannot be changed to lossless. Applying this profile to a port will allow the port to have 802.2x pause enabled through the interfaces commands. Can be applied to ports with a standard VFC profile. Can be applied to a DCB port only if pfc willing and pfc tlv bits are disabled. | ||||
| CalaDcbxDCPRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current alaDcbxDCPRowStatus controls the creation and deletion of rows in the table. | ||||
| TalaDcbxDCPTrafficClassTable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2 | NA | ||
table · not-accessible · current A table of Traffic Classes for the DCB Profiles. | ||||
| RalaDcbxDCPTCEntry | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1 | NA | ||
row · not-accessible · current A DCB profile traffic class entry. | ||||
| CalaDcbxDCPTCDCPId | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.1 | Unsigned32 (1..128) | NA | |
column · Unsigned32 (1..128) · not-accessible · current Identifier of DCB profile. | ||||
| CalaDcbxDCPTCTrafficClass | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.2 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class. | ||||
| CalaDcbxDCPTCDCPName | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.3 | SnmpAdminString (SIZE (0..32)) | RW | |
column · SnmpAdminString (SIZE (0..32)) · read-write · current Name of DCB profile. | ||||
| CalaDcbxDCPTCMaximumBandwidth | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.4 | LldpXdot1dcbxTrafficClassBandwidthValue | RW | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-write · current Indicates the max bandwidth assigned to this traffic class. | ||||
| CalaDcbxDCPTCMinimumBandwidth | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.5 | LldpXdot1dcbxTrafficClassBandwidthValue | RW | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-write · current Indicates the min bandwidth assigned to this traffic class. | ||||
| CalaDcbxDCPTCPFCLinkDelay | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.6 | Unsigned32 (0 | 10..100) | RW | |
column · Unsigned32 (0 | 10..100) · read-write · current PFC link delay allowance. Default for a lossy TC is 0 and cannot be any other value. Default for a lossless TC is 52 and can be changed in a valid range (10-100). | ||||
| CalaDcbxDCPTCPFCLinkDelayUserModified | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the Link Delay value has been modified by the user. | ||||
| CalaDcbxDCPTCPFCTrafficFlow | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.8 | DcbxTrafficFlow | RW | |
column · DcbxTrafficFlow · read-write · current Indicates if PFC traffic flow is enabled on this traffic class | ||||
| CalaDcbxDCPTCPriorityMap | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current A bitmap that indicates the priorities assigned to this traffic class. | ||||
| CalaDcbxDCPTCTrafficScheduler | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.10 | LldpXdot1dcbxTrafficSelectionAlgorithm | RO | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-only · current Indicates the traffic class scheduler algorithm assigned to this traffic class. | ||||
| CalaDcbxDCPTCRecommendedBandwidth | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.11 | LldpXdot1dcbxTrafficClassBandwidthValue | RW | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-write · current Indicates the recommended min bandwidth assigned to this traffic class. | ||||
| CalaDcbxDCPTCRecommendedTrafficScheduler | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.12 | LldpXdot1dcbxTrafficSelectionAlgorithm | RO | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-only · current Indicates the recommended traffic class scheduler algorithm assigned to this traffic class. | ||||
| TalaDcbxPortInstanceTable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3 | NA | ||
table · not-accessible · current A table of DCP Port Instances. | ||||
| RalaDcbxPortInstanceEntry | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1 | NA | ||
row · not-accessible · current A DCP Port Instance Entry. Creating this entry for a port will change the port mode to DCB, set the default DCB profile (if none is specified), will disable NDCB features, and will create a set of alaDcbxPIPrioEntrys for the port.
| ||||
| CalaDcbxPIIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Identifier of DCB profile applied to this port. | ||||
| CalaDcbxPIDCBXAdmin | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.2 | VfcEnableState | RC | |
column · VfcEnableState · read-create · current DCBX Admin State. Enable or Disable all DCBX features on this port. | ||||
| CalaDcbxPIDCBXOper | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.3 | VfcEnableState | RO | |
column · VfcEnableState · read-only · current DCBX Oper State. Enable or Disable all DCBX features on this port. | ||||
| CalaDcbxPIAdminDCPId | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.4 | Unsigned32 (1..128) | RC | |
column · Unsigned32 (1..128) · read-create · current Identifier of DCB profile applied to this port. | ||||
| CalaDcbxPIAdminDCPName | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.5 | SnmpAdminString (SIZE (0..32)) | RC | |
column · SnmpAdminString (SIZE (0..32)) · read-create · current Name of DCB profile applied to this port. | ||||
| CalaDcbxPILocalModified | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Value is true if local configuration is different from configuration imported from the DCB profile applied to this port. | ||||
| CalaDcbxPIPFCDefense | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.7 | VfcEnableState | RC | |
column · VfcEnableState · read-create · current PFC Defense Mode. Applies when PFC negotiation fails. If value is enabled, then PFC becomes disabled but traffic still flows. If the value is disabled, then PFC local configuration remains on the port. | ||||
| CalaDcbxPIPFCStatsClear | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.8 | VfcEnableState | RC | |
column · VfcEnableState · read-create · current Clear the PFC stats for this port. | ||||
| CalaDcbxPIStatus | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.9 | DcbxStatus | RO | |
column · DcbxStatus · read-only · current Indicates port status. | ||||
| CalaDcbxPIActionTaken | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.10 | DcbxActionTaken | RO | |
column · DcbxActionTaken · read-only · current Indicates the action taken as a result of the status. | ||||
| CalaDcbxPIRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current Controls the creation and deletion of rows in the alaDcbxPortInstanceTable. | ||||
| CalaDcbxPIDCBXVersion | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.12 | DcbxVersion | RC | |
column · DcbxVersion · read-create · current DCBX Version selected on this port. | ||||
| CalaDcbxPIDCBXOperVersion | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.13 | DcbxVersion | RO | |
column · DcbxVersion · read-only · current DCBX Version operating on this port. | ||||
| CalaDcbxPIDCBXRemoteOperVersion | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.14 | RemoteDcbxVersion | RO | |
column · RemoteDcbxVersion · read-only · current DCBX Remote Version operating on this port. | ||||
| TalaDcbxPIPriorityTable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4 | NA | ||
table · not-accessible · current A table of Priorities for DCP Port Instances. | ||||
| RalaDcbxPIPrioEntry | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1 | NA | ||
row · not-accessible · current A DCB profile traffic class entry. | ||||
| CalaDcbxPIPrioIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Identifier of DCP Port Instance. | ||||
| CalaDcbxPIPrioPriority | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.2 | IEEE8021PriorityValue | NA | |
column · IEEE8021PriorityValue · not-accessible · current Indicates the priority of the DCP Port Instance. | ||||
| CalaDcbxPIPrioTC | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.3 | LldpXdot1dcbxTrafficClassValue | RO | |
column · LldpXdot1dcbxTrafficClassValue · read-only · current Indicates the traffic class this priority belongs to. | ||||
| CalaDcbxPIPrioPFCPacketsReceived | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Total PFC received packet count. | ||||
| CalaDcbxPIPrioPFCPacketsTransmitted | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Total PFC transmitted packet count. | ||||
| SalaDcbxPfcLLPrioritiesUsed | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.5 | Unsigned32 | RO | deprecated |
scalar · Unsigned32 · read-only · deprecated This object specifies the number of PFC Lossless Priorities in use in the system. | ||||
| SalaDcbxPfcLLPrioritiesReserved | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.6 | Unsigned32 | RO | deprecated |
scalar · Unsigned32 · read-only · deprecated This object specifies the number of PFC Lossless Priorities in reserved in the system. | ||||
| SalaDcbxPfcLLPrioritiesAvailable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.7 | Unsigned32 | RO | deprecated |
scalar · Unsigned32 · read-only · deprecated This object specifies the number of Priorities available to be configured as PFC Lossless. | ||||
| TalaDcbxPfcUsageTable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8 | NA | ||
table · not-accessible · current A table of chassis entries. Each depicts the pfc priorities available per chassis. Only valid for TOR platform. In Virtual Chassis mode there is an entry per chassis. In non-Virtual Chassis mode, only one entry is present. | ||||
| RalaDcbxPfcUsageEntry | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1 | NA | ||
| CalaDcbxPfcUsageChassisId | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Chassis ID. | ||||
| CalaDcbxPfcUsagePrioritiesUsed | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object specifies the number of PFC Lossless Priorities in use. | ||||
| CalaDcbxPfcUsagePrioritiesReserved | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object specifies the number of PFC Lossless Priorities reserved. | ||||
| CalaDcbxPfcUsagePrioritiesAvailable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object specifies the number of Priorities available to be configured as PFC Lossless. | ||||
| TalaXdot1dcbxAdminApplicationPriorityAppTable | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9 | NA | ||
table · not-accessible · current Table containing entries indicating the status of the corresponding row in lldpXdot1dcbxAdminApplicationPriorityAppTable | ||||
| RalaXdot1dcbxAdminApplicationPriorityAppEntry | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1 | NA | ||
row · not-accessible · current Entry that indicates the rowstatus of application priority entry in lldpXdot1dcbxAdminApplicationPriorityAppTable | ||||
| CalaXdot1dcbxAdminApplicationPriorityAEPriority | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.1 | IEEE8021PriorityValue | RC | |
column · IEEE8021PriorityValue · read-create · current The priority code point that should be used in frames transporting the protocol indicated by alaXdot1dcbxAdminApplicationPriorityAESelector and alaXdot1dcbxAdminApplicationPriorityAEProtocol | ||||
| CalaXdot1dcbxAdminApplicationPriorityAppRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object controls only the deletion of an entry in lldpXdot1dcbxAdminApplicationPriorityAppTable. | ||||
| NalaDcbxConformance | 1.3.6.1.4.1.6486.801.1.2.1.72.1.1.2 | |||
| NalcatelIND1DcbxMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2 | |||
node · current Branch For VFC-DCBX Subsystem Conformance Information. | ||||
| NalcatelIND1DcbxMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1 | |||
node · current Branch For VFC-DCBX Subsystem Units Of Conformance. | ||||
| GalaDcbxDCProfileGroup | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.1 | |||
group · current Collection of DCB Profile for management of DCBX. | ||||
| GalaDcbxDCPTrafficClassGroup | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.2 | |||
group · current Collection of DCB Profile Traffic Class for management of DCBX.
| ||||
| GalaDcbxPortInstanceGroup | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.3 | |||
group · current Collection of DCP Port Instances for management of DCBX. | ||||
| GalaDcbxPortInstancePriorityGroup | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.4 | |||
group · current Collection of DCP Port Instance Traffic Class for management of DCBX. | ||||
| GalaDcbxPfcUsageGroup | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.5 | |||
group · current Collection of PFC Lossless TC Usage Objects. | ||||
| GalaDcbxPfcUsageNewGroup | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.6 | |||
group · current Collection of PFC Lossless Priorities Usage Objects. Compatible with Virtual Chassis mode. | ||||
| GalaXdot1dcbxAdminApplicationPriorityGroup | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1.7 | |||
group · current Collection of dcbx app priority configuration Usage Objects. | ||||
| NalcatelIND1DcbxMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.2 | |||
node · current Branch For VFC-DCBX Subsystem Compliance Statements. | ||||
| MalcatelIND1DcbxMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.72.1.2.2.1 | |||
compliance · current Compliance statement for VFC-DCBX Subsystem. | ||||
Textual conventions
DcbxActionTakenINTEGERcfgLocalAdmin(5)cfgLocalRecom(6)cfgRemoteAdmin(7)cfgRemoteRecom(8)disabledPfc(3)na(0)restEtsAdminCfg(1)restEtsPfcAdminCfg(4)restPfcAdminCfg(2)Indicates the action taken as a result of DcbxStatus 0: No action taken (dcbx might not be operationaly UP) 1: Restored ETS admin config 2: Restored PFC admin config 3: Disabled PFC 4: Restored ETS and PFC admin config 5: Configured local admin 6: Configured local recommended 7: Configured remote admin 8: Configured remote recommended
DcbxPriorityTCMapOCTET STRING (SIZE (32))Each group of four octets in this string specify a 32-bit Traffic class ID. The IDs are stored in network byte order; i.e. octet N corresponds to the most significant 8 bits of the ID, and octet N+3 correspond to the least significant 8 bits. The list is large enough to hold 8 TC IDs, one per priority. The first first 4 octets represent the first priority.
DcbxStatusINTEGERetsPfcTlvMismatch(4)etsTlvMismatch(3)ok(0)pfcResourcesExhausted(1)pfcTlvMismatch(2)Indicates the dcbx status (could be related to hardware) 0: OK 1: PFC Resources Exhausted 2: PFC TLV Mismatch 3: ETS TLV Mismatch 4: PFC and ETS TLV Mismatch
DcbxTCsPresentOCTET STRING (SIZE (1))Octet representing the traffic classes present in a particular profile. Each bit represents the presence of the traffic class. The first bit indicates if TC 0 is present, the second bit indicates TC 1, and so forth. Bit value 1 indicates the TC is present. Bit value 0 indicates the TC is not present. Can be used to change the TC numbering.
DcbxTrafficFlowINTEGERtfLossless(1)tfLossy(0)Indicates the traffic flow 0: Lossy 1: Lossless
DcbxVersionINTEGERauto(2)cee(1)ieee(0)Indicates the dcbx version 0: IEEE 1: CEE 2: AUTO
RemoteDcbxVersionINTEGERauto(2)cee(1)ieee(0)unknown(3)Indicates the remote dcbx version 0: IEEE 1: CEE 2: AUTO 3: Unknown