ALCATEL-IND1-AUTO-FABRIC-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-AUTO-FABRIC-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-AUTO-FABRIC-MIB <host> 1.3.6.1.4.1.6486.801.1.2.1.75.1Imports
| ALCATEL-IND1-BASE | softentIND1AutoFabric |
|---|---|
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1AUTOFABRICMIB | 1.3.6.1.4.1.6486.801.1.2.1.75.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1AUTOFABRICMIBNotifications | 1.3.6.1.4.1.6486.801.1.2.1.75.1.0 | |||
| !alaAutoFabricSTPModeChangeAlert | 1.3.6.1.4.1.6486.801.1.2.1.75.1.0.1 | |||
notification · current This trap is sent when auto-fabric changes STP mode.
| ||||
| NalcatelIND1AUTOFABRICMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1 | |||
node · current Branch For AUTO-FABRIC Subsystem Managed Objects. | ||||
| SalaAutoFabricGlobalStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or diable Autofabric on the switch. The value enable (1) indicates that Autofabric should be enabled on the switch. The value disable (2) is used to disable Autofabric on the switch. By default, Autofabric is enabled on the switch.
| ||||
| SalaAutoFabricGlobalDiscovery | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the global discovery window control for Autofabric. The value restart (2) indicates that Autofabric should restart global discovery window. By default, this object contains a zero value.
| ||||
| SalaAutoFabricGlobalLACPProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or diable AutoFabric LACP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create LACP link aggregates. The value
disable (2) indicates that there would be no attempt to create LACP
link aggregates during the discovery phase. By default LACP is enabled
on the switch
| ||||
| SalaAutoFabricGlobalSPBProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or diable AutoFabric SPB discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create SPB adjacencies. The value
disable (2) indicates that there would be no attempt to create SPB
adjacencies during the discovery phase. By default SPB is enabled
on the switch
| ||||
| SalaAutoFabricGlobalMVRPProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or diable AutoFabric MVRP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will enable MVRP and attempt to propagate and learn VLANs.
The value disable (2) indicates that MVRP would not be enabled in
discovery phase. By default MVRP is enabled on the switch
| ||||
| SalaAutoFabricGlobalConfigSaveTimer | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.6 | Unsigned32 (60..3600) | RW | |
scalar · Unsigned32 (60..3600) · read-write · current Maximum period of time after which configuration built up by AutoFabric
would get written to the boot.cfg or vcboot.cfg.
The range supported is 60-3600 seconds.
| ||||
| SalaAutoFabricGlobalConfigSaveTimerStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or diable AutoFabric config save
timer on the switch. The value enable (1) indicates that
after the expiry of the config save timer, all AutoFabric
configurations would get written to the boot.cfg ot the vcboot.cfg
The value disable (2) would disable the config save timer.
By default it is enabled
| ||||
| SalaAutoFabricGlobalDiscoveryTimer | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.8 | Unsigned32 (0..3600) | RW | |
scalar · Unsigned32 (0..3600) · read-write · current This variable is used to specify auto-fabric auto
discovery interval, zero disables it, configurable
Value is from 2 to 3600 minutes.
| ||||
| NalaAutoFabricPortConfig | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9 | |||
| TalaAutoFabricPortConfigTable | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1 | NA | ||
table · not-accessible · current A table containing Autofabric port configuration information. | ||||
| RalaAutoFabricPortConfigEntry | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1 | NA | ||
row · not-accessible · current An AutoFabric port configuration entry. | ||||
| CalaAutoFabricPortConfigIfIndex | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifindex of the port on which AutoFabric is running | ||||
| CalaAutoFabricPortConfigStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This variable is used to enable or diable AutoFabric on the interface. The value enable (1) indicates that AutoFabric should be enabled on the interface. The value disable (2) is used to disable AutoFabric on the interface. By default, AutoFabric is enabled on the interface.
| ||||
| CalaAutoFabricPortLACPProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This variable is used to enable LACP in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will attempt to form LACP link aggregates. The value disable (2) indicates this port will not participate in LACP discovery phase. By default it is enabled
| ||||
| CalaAutoFabricPortSPBProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This variable is used to enable SPB in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will attempt to form SPB adjacencies. The value disable (2) indicates this port will not participate in SPB discovery phase. By default it is enabled
| ||||
| CalaAutoFabricPortMVRPProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This variable is used to enable MVRP in the AutoFabric discovery on this port. The value enable (1) indicates during discovery window this port will enable MVRP and attempt to learn and propagate VLANs. The value disable (2) indicates this port will not participate in MVRP discovery phase. By default it is enabled
| ||||
| CalaAutoFabricPortStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The state of the Autofabric discovery window on the port.
| ||||
| CalaAutoFabricPortSPBDefaultProfile | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the default SAP profile used on a particular port in the switch. singleService: defines single service SAP profiles. autoVlan: AOS will generate SAP bindings for VLANS concerned automatically.
| ||||
| SalaAutoFabricRemoveGlobalConfig | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.10 | INTEGER | RW | deprecated |
scalar · INTEGER · read-write · deprecated This variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabric
| ||||
| SalaAutoFabricGlobalOSPFv2ProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or disable auto configuration on the OSPFv2 IP Protocol on the switch.
| ||||
| SalaAutoFabricGlobalOSPFv3ProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or disable auto configuration on the OSPFv3 IP Protocol on the switch.
| ||||
| SalaAutoFabricGlobalISISProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or disable auto configuration on the ISIS IP Protocol on the switch.
| ||||
| SalaAutoFabricSPBDefaultProfile | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object specifies the default SAP profile used in the Omni switch. singleService: defines single service SAP profiles. autoVlan: AOS will generate SAP bindings for VLANS concerned automatically
| ||||
| SalaAutoFabricLBDProtocolStatus | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is used to enable or disable AutoFabric LBD on SAP port on the switch. The value enable (1) indicates that during discovery the switch will enable Loopback detection on UNP SAP port. The value disable (2) indicates that Loobback detection will not be enabled on UNP SAP port discovery
| ||||
| NalaAutoFabricTrapsObj | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.16 | |||
| SalaAutoFabricSTPMode | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.16.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Indicates the change in STP Mode, to Flat or 1X1, due to the change in Auto-Fabric admin-status.
| ||||
| SalaAutoFabricRemoveVCReload | 1.3.6.1.4.1.6486.801.1.2.1.75.1.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is applicable only for Standalone configuration. It reloads the unit as a Standalone when the user chooses to disable auto fabric.
| ||||
| NalcatelIND1AUTOFABRICMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2 | |||
node · current Branch for AUTOFABRIC Module MIB Subsystem Conformance Information. | ||||
| NalcatelIND1AUTOFABRICMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1 | |||
node · current Branch for AUTOFABRIC Module MIB Subsystem Units of Conformance. | ||||
| GalaAutoFabricBaseGroup | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.1 | |||
group · current Collection of objects for management of AutoFabric Base Group.
| ||||
| GalaAutoFabricPortConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.2 | |||
group · current Collection of objects for management of AutoFabric Port Configuration Table. | ||||
| GalaAutoFabricNotificationGroup | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.3 | |||
| GalaAutoFabricTrapsObjGroup | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1.4 | |||
| NalcatelIND1AUTOFABRICMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2.2 | |||
node · current Branch for AUTOFABRIC Module MIB Subsystem Compliance Statements. | ||||
| MalcatelIND1AUTOFABRICMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.75.1.2.2.1 | |||
compliance · current Compliance statement for AUTOFABRIC. | ||||
Traps / Notifications
- alaAutoFabricSTPModeChangeAlert
1.3.6.1.4.1.6486.801.1.2.1.75.1.0.1