ALCATEL-IND1-UDP-RELAY-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
UDP Relay to forward BOOTP/DHCP requests across VLANs
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-UDP-RELAY-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-UDP-RELAY-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.10.9.1Imports
| ALCATEL-IND1-BASE | alaDhcpClientTraps, routingIND1UdpRelay |
|---|---|
| ALCATEL-IND1-VLAN-STP-MIB | VlanBitmap |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1UDPRelayMIB | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
UDP Relay to forward BOOTP/DHCP requests across VLANs
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1UDPRelayMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1 | |||
node · current Branch For UDP Relay Subsystem Managed Objects. | ||||
| NiphelperMIB | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1 | |||
| TiphelperTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1 | NA | ||
table · not-accessible · current A list of active UDP Relay Service instances. | ||||
| RiphelperEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1 | NA | ||
row · not-accessible · current An entry in UDP Relay table | ||||
| CiphelperService | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.1 | IphelperServIndex | RC | |
column · IphelperServIndex · read-create · current This specifies a service to be forwarded by UDP Relay. | ||||
| CiphelperForwAddr | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current This specifies relayed service's forwarding address.
For entries with iphelperService equal to iphelperBootp(1):
This object can either be set to a distinct IP address (e.g. the address
of a server), to an IP broadcast address or a VLAN. A value
of 0.0.0.0 indicates that no forwarding address is being used.
For entries with iphelperService not equal to ipHelperBootp(1),
this object is not settable. | ||||
| CiphelperVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This specifies a Vlan to which the service is to be forwarded.
For entries with iphelperService equal to iphelperBootp(1),
a value of 0 indicates that no vlan is being used.
For entries with iphelperService not equal to ipHelperBootp(1),
only non-zero values may be specified. | ||||
| CiphelperStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| TiphelperStatTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2 | NA | ||
table · not-accessible · current This keeps statistics for each service by server address. | ||||
| RiphelperStatEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1 | NA | ||
| CiphelperServerAddress | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current This specifies the unique server address. | ||||
| CiphelperRxFromClient | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.2 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This keeps track of the number of packets recieved from the client. | ||||
| CiphelperTxToServer | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.3 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This keeps track of the number of packets transmitted to the server. | ||||
| CiphelperMaxHopsViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.4 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This keeps track of the number of packets dropped due to max hops violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1). | ||||
| CiphelperForwDelayViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.5 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This keeps track of the number of packets dropped due to forward delay violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1). | ||||
| CiphelperResetAll | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.6 | INTEGER (0..1) | RW | |
column · INTEGER (0..1) · read-write · current This parameter resets all the stats. | ||||
| CiphelperAgentInfoViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to DHCP packet with giaddr field not equal to zero and Relay Agent Information option is present and also the Relay Agent Information Policy is set to DROP. | ||||
| CiphelperInvalidGatewayIP | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to giaddr matching a local subnet and Relay Agent Information option is present in the DHCP packet. | ||||
| CiphelperInvalidAgentInfoOptFrmSrver | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to invalid from DHCP server with Relay Agent Information option in the DHCP packet. | ||||
| SiphelperForwDelay | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.3 | Unsigned32 (0..65535) | RW | |
scalar · Unsigned32 (0..65535) · read-write · current This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. For other services it is ignored.It is typically set as seconds, but the value is totally client dependent.This relay will not forward frames until client frames have 'secs' field set to atleast the value iphelperForwDelay. | ||||
| SiphelperMaxHops | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.4 | Unsigned32 (1..16) | RW | |
scalar · Unsigned32 (1..16) · read-write · current This sets the BOOTP/DHCP relay's maximum hops forwarding limit and is only used by the BOOTP/DHCP service. For other services it is ignored. If a frame arrives with hopcount greater than or equal to iphelperMaxHops, it will be dropped. | ||||
| SiphelperForwardOption | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is only significant for the BOOTP/DHCP service. It allows the relay to forward DHCP requests only when they are issued by an Authenticated Vlan client.Needed to prevent having multiple relays enabled on the same vlan. Default value is standard
| ||||
| SiphelperBootupOption | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of the relay to get an IP address at the time of system boot-up and assign that IP address as the router IP of the default VLAN. Default option is Disable.
| ||||
| SiphelperBootupPacketOption | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is only significant for the BOOTP/DHCP service. It allows the user to
select the packet format with the choices of BOOTP and DHCP to be used to get
an IP address at the time of system boot-up.
Default option is DHCP
| ||||
| TiphelperxServicePortAssociationTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8 | NA | ||
table · not-accessible · current A list of services being forwarded with their associated ports.
An entry in this table is allowed only for the services listed below:
iphelperBootp
iphelperNbnsNbdd
iphelperNbdd
iphelperDns
iphelperTacacs
iphelperTftp
iphelperNtp | ||||
| RiphelperxServicePortAssociationEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1 | NA | ||
row · not-accessible · current An entry in UDP Relay PortAssociation table | ||||
| CiphelperxServicePortAssociationService | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.1 | IphelperServIndex | RW | |
column · IphelperServIndex · read-write · current This specifies the service being forwarded.
Legal values:
iphelperBootp(1)
iphelperNbnsNbdd(2)
iphelperNbdd(3)
iphelperDns(4)
iphelperTacacs(5)
iphelperTftp(6)
iphelperNtp(7) | ||||
| CiphelperxServicePortAssociationPort | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current UDP port for the service. | ||||
| CiphelperxServicePortAssociationName | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.3 | DisplayString (SIZE (0..30)) | RO | |
column · DisplayString (SIZE (0..30)) · read-only · current The name and/or description of the service. | ||||
| CiphelperxServicePortAssociationStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| TiphelperxPortServiceAssociationTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9 | NA | ||
table · not-accessible · current A list of services being forwarded with their associated ports.
An entry in this table is allowed only for those services
NOT using one of the following well-known ports:
53 - DNS
65 - TACACS
67 - BOOTP/DHCP
68 - BOOTP/DHCP
69 - TFTP
123 - NTP
137 - NBNS
138 - NBDD | ||||
| RiphelperxPortServiceAssociationEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1 | NA | ||
row · not-accessible · current An entry in UDP Relay PortAssociation table | ||||
| CiphelperxPortServiceAssociationService | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.1 | IphelperServIndex | RO | |
column · IphelperServIndex · read-only · current This specifies the service being forwarded. | ||||
| CiphelperxPortServiceAssociationPort | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current UDP port for the service.
May not be one of the following well-known ports:
53 - DNS
65 - TACACS
67 - BOOTP/DHCP
68 - BOOTP/DHCP
69 - TFTP
123 - NTP
137 - NBNS
138 - NBDD | ||||
| CiphelperxPortServiceAssociationName | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.3 | DisplayString (SIZE (0..30)) | RC | |
column · DisplayString (SIZE (0..30)) · read-create · current The name and/or description of the service. | ||||
| CiphelperxPortServiceAssociationStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| TiphelperxPropertiesTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10 | NA | ||
table · not-accessible · current A list of services being forwarded with their associated ports. There is an entry in this table for each service being forwarded by UDP Relay, including those with implied protocol/port associations. | ||||
| RiphelperxPropertiesEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1 | NA | ||
row · not-accessible · current An entry in UDP Relay Service Properties table | ||||
| CiphelperxPropertiesService | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1.1 | IphelperServIndex | RO | |
column · IphelperServIndex · read-only · current This specifies the service to be forwarded. | ||||
| CiphelperxPropertiesPort | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current UDP port for the service. | ||||
| CiphelperxPropertiesName | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1.3 | DisplayString (SIZE (0..30)) | RO | |
column · DisplayString (SIZE (0..30)) · read-only · current The name/description of the service. | ||||
| TiphelperxStatTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11 | NA | ||
table · not-accessible · current This keeps statistics for each service by server address. | ||||
| RiphelperxStatEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1 | NA | ||
row · not-accessible · current An entry in the stat table. | ||||
| CiphelperxStatService | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.1 | IphelperServIndex | RO | |
column · IphelperServIndex · read-only · current This specifies the service being forwarded. | ||||
| CiphelperxStatServerAddress | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current This specifies the unique server address. | ||||
| CiphelperxStatVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This specifies the unique Vlan of the server. | ||||
| CiphelperxStatRxFromClient | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.4 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current This keeps track of the number of packets recieved from the client. | ||||
| CiphelperxStatTxToServer | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.5 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current This keeps track of the number of packets transmitted to the server. | ||||
| CiphelperxStatReset | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.6 | INTEGER (0..1) | RW | |
column · INTEGER (0..1) · read-write · current This parameter resets all the stats for this entry. | ||||
| SiphelperAgentInformation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of inserting the relay agent information option to the DHCP option field according to RFC 3046.
| ||||
| SiphelperAgentInformationPolicy | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is only significant for the BOOTP/DHCP service. It allows the user to select the policy of either drop, keep or replace the relay agent information option if it is already present in the DHCP packet.
| ||||
| TiphelperDhcpSnoopingVlanTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14 | NA | ||
table · not-accessible · current A list of vlans that have DHCP Snooping enabled. | ||||
| RiphelperDhcpSnoopingVlanEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1 | NA | ||
| CiphelperDhcpSnoopingVlanNumber | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.1 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current The VLAN number identifying this instance. Valid range from 1 to 4094. | ||||
| CiphelperDhcpSnoopingVlanOpt82DataInsertionStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The DHCP Option-82 data insertion status. Default value is enabled, which means once the VLAN is enabled for DHCP snooping, the Option-82 field will be inserted in the DHCP packets between the Relay Agent and the DHCP Server, on all the ports belong to the VLAN.
| ||||
| CiphelperDhcpSnoopingVlanMacAddrVerificationStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The DHCP Snooping MAC Address verification status. Default value is enabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vlan port, it compares the source MAC address and the client Hardware Address in the DHCP packet. If mismatch, the packet will be dropped.
| ||||
| CiphelperDhcpSnoopingVlanTrafficSuppressionStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vlan port will not be flooded throughout the VLAN. The usage of UDP/DHCP Relay Agent will be enforced. Traffic will always be forwarded to CPU.
| ||||
| CiphelperDhcpSnoopingVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| TiphelperDhcpSnoopingPortTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15 | NA | ||
table · not-accessible · current A list of ports that have DHCP Snooping trust status. | ||||
| RiphelperDhcpSnoopingPortEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1 | NA | ||
| CiphelperDhcpSnoopingPortIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex subindex identifying this instance. | ||||
| CiphelperDhcpSnoopingPortTrustMode | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The DHCP Snooping's VLAN port's trust mode. Default value is client-only, which means once the VLAN is enabled for DHCP snooping, the vlan ports only allow DHCP client packets. Blocked means all DHCP traffic is block on the port. Trusted means all DHCP traffic is allowed on the port
| ||||
| CiphelperDhcpSnoopingPortTrafficSuppression | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those ports will not be flooded instead will always be forwarded to CPU.
| ||||
| CiphelperDhcpSnoopingPortMacAddrViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to DHCP packet with the source MAC Address not equal the client DHCP Hardware address in the DHCP packet. | ||||
| CiphelperDhcpSnoopingPortDhcpServerViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to receiving an DHCP server packet on a DHCP Snooping enabled port. | ||||
| CiphelperDhcpSnoopingPortOption82Violation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to a relay agent forards a packet that includes option 82 info to an untrusted port. | ||||
| CiphelperDhcpSnoopingPortRelayAgentViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to an DHCP relay agent forwards a DHCP packate includes an relay agent ip address that is not 0.0.0.0. | ||||
| CiphelperDhcpSnoopingPortBindingViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to receiving an DHCP Relase or DHCP Decline message that contains a MAC address in the DHCP snooping binding table, but the interface information in the binding table does not match the interface on which the message was received. | ||||
| CiphelperDhcpSnoopingPortIpSourceFiltering | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The DHCP Snooping IP Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IP address, MAC address and port will be allowed.
| ||||
| TiphelperDhcpSnoopingBindingTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16 | NA | ||
table · not-accessible · current DHCP Snooping binding table. | ||||
| RiphelperDhcpSnoopingBindingEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1 | NA | ||
row · not-accessible · current A DHCP Snooping binding entry. | ||||
| CiphelperDhcpSnoopingBindingMacAddress | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.1 | MacAddress | RW | |
column · MacAddress · read-write · current The MAC Address subindex identifying this instance. | ||||
| CiphelperDhcpSnoopingBindingIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.2 | InterfaceIndex | RW | |
column · InterfaceIndex · read-write · current The IfIndex subindex identifying this instance. It is the the interface where the DHCP request is coming in from. | ||||
| CiphelperDhcpSnoopingBindingIpAddress | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The Ip Address offered by the DHCP Server to the Client. | ||||
| CiphelperDhcpSnoopingBindingVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current It is the VLAN Id where the DHCP client belongs to. | ||||
| CiphelperDhcpSnoopingBindingLeaseTime | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The lease time of the client's IP Address in minutes. | ||||
| CiphelperDhcpSnoopingBindingType | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The learning/configuration nature of the binding entry. Normally, the entries are learned dynamically, while it also can be statically/manually configured.
| ||||
| CiphelperDhcpSnoopingBindingRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| CiphelperDhcpSnoopingBindingRemoteFlag | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Flag to indicate whether the binding entry belong to local chassis or remote chassis in multi-chassis environment.
| ||||
| SiphelperDhcpSnooping | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enabling DHCP Snooping at the switch level. For the vlan level, it is enabled implicitly when an individual vlan's DHCP Snooping is enbled.
| ||||
| SiphelperDhcpSnoopingOpt82DataInsertionStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current The DHCP Option-82 data insertion status at switch level. Default value is enabled, the Option-82 field will be inserted in the DHCP packets between the Relay Agent and the DHCP Server, on all the ports belong to the switch.
| ||||
| SiphelperDhcpSnoopingMacAddrVerificationStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current The DHCP Snooping MAC Address verification status at switch level. Default value is enabled. Once enabled, for all the incoming DHCP traffic to the port, it compares the source MAC address and the client Hardware Address in the DHCP packet. If mismatch, the packet will be dropped.
| ||||
| SiphelperDhcpSnoopingTrafficSuppressionStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current The DHCP Snooping Traffic Suppression status at switch level. Default value is disabled. Once enabled, for all the incoming DHCP traffic to the ports will not be flooded The usage of UDP/DHCP Relay Agent will be enforced. DHCP Traffic will always be forwarded to CPU.
| ||||
| SiphelperDhcpSnoopingBindingStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object specifies if the capability of building the DHCP Snooping Binding Table/Database is enable or not. By default, it is enabled. It is applicable for both switch-level or vlan-level DHCP Snooping.
| ||||
| SiphelperDhcpSnoopingBindingDatabaseSyncTimeout | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.22 | Unsigned32 (180..600) | RW | |
scalar · Unsigned32 (180..600) · read-write · current The DHCP Snooping Binding Database synchronization timeout value. It is used to specify the synchronization frequency, in seconds, between the binding table in memory and the binding file in flash. | ||||
| SiphelperDhcpSnoopingBindingDatabaseLastSyncTime | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.23 | DisplayString | RO | |
scalar · DisplayString · read-only · current The time stamp of the last successuful DHCP Snooping Binding Database synchronization. | ||||
| SiphelperDhcpSnoopingBindingDatabaseAction | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object identifies the action to be performed. Purge: means to clear the binding table entries in the memory. Renew: means to populate the binding table entries from the flash file.
| ||||
| SiphelperTrafficSuppressionStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP packet traffic suppression status. By default, it is disabled. Once enabled, all incoming DHCP packets will be sent to software only, and no longer be hardware flooded.
| ||||
| SiphelperDhcpSnoopingBypassOpt82CheckStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP bypass option-82 check status. By default, it is disabled. Once enabled, it will no longer enforce the check of option-82 field in the incoming DHCP Packets on those untrusted ports.
| ||||
| SiphelperDhcpOption82FormatType | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP option-82 defines the type of information carried in circuit id and remote id sub option fields. If the type selected is string the actual value of the string can be found in iphelperDhcpOption82StringValue. Format type ASCII will insert the configured fields in ASCII format.
| ||||
| SiphelperDhcpOption82StringValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.28 | DisplayString (SIZE (0..63)) | RW | |
scalar · DisplayString (SIZE (0..63)) · read-write · current The value of the string that will be used in the circuit id and remote id sub options. | ||||
| SiphelperPXESupport | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.29 | INTEGER | RW | |
scalar · INTEGER · read-write · current When enabled the relay agent will replace the source IP address of the packet with the gateway IP address from the DHCP packet. The default value is disabled.
| ||||
| SiphelperDhcpSnoopingBindingPersistencyStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP Snooping binding table persistency check status. By default, it is disabled. Once enabled, the binding entries expiry will be solely depend on Lease time
| ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField1 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.31 | IphelpereOption82ASCIIFieldType | RW | deprecated |
scalar · IphelpereOption82ASCIIFieldType · read-write · deprecated The type of the first field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII. This
object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField1StringValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.32 | DisplayString (SIZE (0..63)) | RW | deprecated |
scalar · DisplayString (SIZE (0..63)) · read-write · deprecated The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField2 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.33 | IphelpereOption82ASCIIFieldType | RW | deprecated |
scalar · IphelpereOption82ASCIIFieldType · read-write · deprecated The type of the second field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII. This
object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField2StringValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.34 | DisplayString (SIZE (0..63)) | RW | deprecated |
scalar · DisplayString (SIZE (0..63)) · read-write · deprecated The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField3 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.35 | IphelpereOption82ASCIIFieldType | RW | deprecated |
scalar · IphelpereOption82ASCIIFieldType · read-write · deprecated The type of the third field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII. This
object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField3StringValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.36 | DisplayString (SIZE (0..63)) | RW | deprecated |
scalar · DisplayString (SIZE (0..63)) · read-write · deprecated The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField4 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.37 | IphelpereOption82ASCIIFieldType | RW | deprecated |
scalar · IphelpereOption82ASCIIFieldType · read-write · deprecated The type of the fourth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII. This
object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField4StringValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.38 | DisplayString (SIZE (0..63)) | RW | deprecated |
scalar · DisplayString (SIZE (0..63)) · read-write · deprecated The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField5 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.39 | IphelpereOption82ASCIIFieldType | RW | deprecated |
scalar · IphelpereOption82ASCIIFieldType · read-write · deprecated The type of the fifth field in the Option 82 string in ASCII format,
which will be copied to Option-82 circuit id of the DHCP packet.
This Field is applicable only, if the option 82 format type is ASCII. This
object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIField5StringValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.40 | DisplayString (SIZE (0..63)) | RW | deprecated |
scalar · DisplayString (SIZE (0..63)) · read-write · deprecated The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. This object is deprecated by the objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| SiphelperDhcpSnoopingOption82FormatASCIIDelimiter | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.41 | DisplayString (SIZE (0..63)) | RW | deprecated |
scalar · DisplayString (SIZE (0..63)) · read-write · deprecated The value of the delimiter that is inserted between the fields in the
Option 82 string in ASCII format, which will be copied to Option-82
circuit id of the DHCP packet. This value is applicable only, if the
option 82 format type is ASCII. This object is deprecated by the
objects in iphelperDhcpSnoopingOption82FormatASCIIConfigurableTable. | ||||
| TiphelperDhcpSourceFilterVlanTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42 | NA | ||
table · not-accessible · current A list of vlans that have ip-source-filtering enabled. | ||||
| RiphelperDhcpSourceFilterVlanEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42.1 | NA | ||
row · not-accessible · current A Source Filtering enabled VLAN entry. | ||||
| CiphelperDhcpSourceFilterVlanNumber | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The VLAN number identifying this instance. Valid range from 1 to 4094. | ||||
| CiphelperDhcpSourceFilterVlanFilteringStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The DHCP Snooping IP Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IP address, MAC address , port and vlan will be allowed.
| ||||
| SiphelperOption82Policy | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.43 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is only significant for the BOOTP/DHCP service. It allows the user to select the option-82 insertion policy of either drop, keep or replace the option-82 information if it is already present in the DHCP packet.
| ||||
| TiphelperDhcpSnoopingOption82FormatASCIIConfigurableTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44 | NA | ||
table · not-accessible · current A list of ascii fields used for Circuit ID or Remote ID. | ||||
| RiphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1 | NA | ||
row · not-accessible · current An ascii field entry for Circuit ID or Remote ID. | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableIndex | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.1 | IphelperOption82CircuitOrRemoteId | NA | |
column · IphelperOption82CircuitOrRemoteId · not-accessible · current This object specifies the either circuit id or remote id for option82. | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField1 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.2 | IphelpereOption82ASCIIFieldType | RC | |
column · IphelpereOption82ASCIIFieldType · read-create · current The type of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII. | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField1StrVal | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.3 | SnmpAdminString (SIZE (0..63)) | RC | |
column · SnmpAdminString (SIZE (0..63)) · read-create · current The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField2 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.4 | IphelpereOption82ASCIIFieldType | RC | |
column · IphelpereOption82ASCIIFieldType · read-create · current The type of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField2StrVal | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.5 | SnmpAdminString (SIZE (0..63)) | RC | |
column · SnmpAdminString (SIZE (0..63)) · read-create · current The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField3 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.6 | IphelpereOption82ASCIIFieldType | RC | |
column · IphelpereOption82ASCIIFieldType · read-create · current The type of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField3StrVal | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.7 | SnmpAdminString (SIZE (0..63)) | RC | |
column · SnmpAdminString (SIZE (0..63)) · read-create · current The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField4 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.8 | IphelpereOption82ASCIIFieldType | RC | |
column · IphelpereOption82ASCIIFieldType · read-create · current The type of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField4StrVal | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.9 | SnmpAdminString (SIZE (0..63)) | RC | |
column · SnmpAdminString (SIZE (0..63)) · read-create · current The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField5 | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.10 | IphelpereOption82ASCIIFieldType | RC | |
column · IphelpereOption82ASCIIFieldType · read-create · current The type of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableField5StrVal | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.11 | SnmpAdminString (SIZE (0..63)) | RC | |
column · SnmpAdminString (SIZE (0..63)) · read-create · current The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableDelimiter | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.12 | SnmpAdminString (SIZE (0..63)) | RC | |
column · SnmpAdminString (SIZE (0..63)) · read-create · current The value of the delimiter that is inserted between the fields in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This value is applicable only, if the option 82 format type is ASCII | ||||
| CiphelperDhcpSnoopingOption82FormatASCIIConfigurableStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current This object specifies the status of the entry. | ||||
| SalaMdnsGreTunnelName | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.45 | DisplayString | RW | |
scalar · DisplayString · read-write · current Specifies the tunnel name for the mdns feature. | ||||
| SalaMdnsAdminStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.46 | INTEGER | RW | |
scalar · INTEGER · read-write · current Mdns global status
| ||||
| SalaMdnsFloodVlans | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.47 | VlanBitmap | RW | |
scalar · VlanBitmap · read-write · current Mdns flood vlans | ||||
| TiphelperDhcpSourceFilterAllowSubnetTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48 | NA | ||
table · not-accessible · current A list of ip address that have exempted from ip-source-filtering enabled. | ||||
| RiphelperDhcpSourceFilterAllowIpEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1 | NA | ||
row · not-accessible · current A Source Filtering exempted ip enabled entry. | ||||
| CiphelperDhcpSourceFilterExpIpAddress | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The Ip address identifying this instance | ||||
| CiphelperDhcpSourceFilterExpIpMask | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The Mask address identifying this instance | ||||
| CiphelperDhcpSourceFilterVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.3 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current The VLAN number identifying this instance. Valid range from 1 to 4094. | ||||
| CiphelperDhcpSourceFilterExpIpStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The DHCP snooping IP source filtering exception for subnets status. Default value is disabled. Once enabled, only the incoming traffic with the configured IP address on vlan will be allowed.
| ||||
| SiphelperDhcpSnoopingTrapStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.49 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is only significant for the BOOTP/DHCP service. It allows the user to to configure trap-mode for snooping.
| ||||
| SiphelperDhcpSnoopingArpAllowStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.50 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object specifies if the capability to allow arp packets is enabled or not when the ISF mode is enabled. By default, it is enabled. It is applicable for both switch-level or vlan-level DHCP Snooping.
| ||||
| Nipv6helperMIB | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2 | |||
| Tipv6helperTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1 | NA | ||
table · not-accessible · current A list of active DHCPV6 Relay Service instances. | ||||
| Ripv6helperEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1 | NA | ||
| Cipv6helperForwAddr | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1.1 | InetAddressIPv6 | RC | |
column · InetAddressIPv6 · read-create · current This specifies relayed service's forwarding address. This object is used set DHCPV6 server IPv6 address. | ||||
| Cipv6helperVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1.2 | INTEGER (0..4094) | RC | |
column · INTEGER (0..4094) · read-create · current This specifies a Vlan to which the service is to be forwarded. a value of 0 indicates that no vlan is being used. | ||||
| Cipv6helperStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| Sipv6helperForwardOption | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is to indicate whether relay should work system wide or per vlan. Default value is standard
| ||||
| Sipv6helperMaxHops | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.3 | Unsigned32 (1..32) | RW | |
scalar · Unsigned32 (1..32) · read-write · current This sets the DHCPv6 relay's maximum hops forwarding limit . If a frame arrives with hopcount greater than or equal to ipv6helperMaxHops, it will be dropped. | ||||
| Sipv6helperDhcpSnooping | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enabling LDRA/DHCPv6 Snooping at the switch level. For the vlan level, it is enabled implicitly when an individual vlan's LDRA/DHCPv6 Snooping is enbled.
| ||||
| Tipv6helperDhcpSnoopingVlanTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5 | NA | ||
table · not-accessible · current A list of vlans that have LDRA/DHCPv6 Snooping enabled. | ||||
| Ripv6helperDhcpSnoopingVlanEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5.1 | NA | ||
row · not-accessible · current A LDRA/DHCPv6 Snooping VLAN entry. | ||||
| Cipv6helperDhcpSnoopingVlanNumber | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5.1.1 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current The VLAN number identifying this instance. Valid range from 1 to 4094. | ||||
| Cipv6helperDhcpSnoopingVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| Tipv6helperDhcpSnoopingPortTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6 | NA | ||
table · not-accessible · current A list of ports that have LDRA/DHCPv6 Snooping trust status. | ||||
| Ripv6helperDhcpSnoopingPortEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1 | NA | ||
row · not-accessible · current A LDRA/DHCP Snooping Port entry. | ||||
| Cipv6helperDhcpSnoopingPortIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex subindex identifying this instance. | ||||
| Cipv6helperDhcpSnoopingPortTrustMode | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The LDRA/DHCPv6 Snooping's VLAN port's trust mode. Default value
is clientOnlyUntrusted, which means once the VLAN is enabled for DHCPv6
snooping, the vlan ports only allow DHCPv6 client packets. Blocked
means all DHCPv6 traffic is block on the port. clientOnlyTrusted means
DHCPV6 client and Relay-Foward msg from another relay agent is allowed.
Trusted means all DHCPv6 traffic is allowed on the port.
| ||||
| Cipv6helperSnoopingClientViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number client violation packets dropped. | ||||
| Cipv6helperSnoopingServerViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of server violation packets received/dropped , server packet received on client port. | ||||
| Cipv6helperSnoopingBindingViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to mismacthed binding entry with client infomration. | ||||
| Cipv6helperSnoopingInterfaceidViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current This keeps track of the number of packets dropped due to invalid interface id value from DHCP server in Relay Agent Information option in the DHCP packet. | ||||
| Cipv6helperSnoopingPortSourceFilterStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current IPV6 Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IPV6 address, MAC address and port will be allowed.
| ||||
| Sipv6helperDhcpSnoopingBindingStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object specifies if the capability of building the DHCPv6 Snooping Binding Table/Database is enable or not. By default, it is enabled. It is applicable for both switch-level or vlan-level DHCPv6 Snooping.
| ||||
| Tipv6helperDhcpSnoopingBindingTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8 | NA | ||
table · not-accessible · current DHCP Snooping binding table. | ||||
| Ripv6helperDhcpSnoopingBindingEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1 | NA | ||
row · not-accessible · current A LDRA/DHCPv6 Snooping binding entry. | ||||
| Cipv6helperBindingLinkLocalAddress | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.1 | InetAddressIPv6 | RW | |
column · InetAddressIPv6 · read-write · current The Link loacl Address subindex identifying this instance. | ||||
| Cipv6helperBindingVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.2 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current It is the VLAN Id where the DHCP client belongs to. | ||||
| Cipv6helperBindingIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.3 | InterfaceIndex | RW | |
column · InterfaceIndex · read-write · current The IfIndex subindex identifying this instance. It is the the interface where the DHCP request is coming in from. | ||||
| Cipv6helperBindingGlobalIpv6Address | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.4 | InetAddressIPv6 | RC | |
column · InetAddressIPv6 · read-create · current The Ip Address offered by the DHCP Server to the Client. | ||||
| Cipv6helperBindingLeaseTime | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The lease time of the client's IP Address. | ||||
| Cipv6helperBindingRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status for creating/deleting | ||||
| Sipv6helperDhcpSnoopingBindingDatabaseSyncTimeout | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.9 | Unsigned32 (180..600) | RW | |
scalar · Unsigned32 (180..600) · read-write · current The DHCPv6 Snooping Binding Database synchronization timeout value. It is used to specify the synchronization frequency, in seconds, between the binding table in memory and the binding file in flash. | ||||
| Sipv6helperDhcpSnoopingBindingDatabaseLastSyncTime | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current The time stamp of the last successuful DHCPv6 Snooping Binding Database synchronization. | ||||
| Sipv6helperDhcpSnoopingBindingDatabaseAction | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object identifies the action to be performed. Purge: means to clear the binding table entries in the memory. Renew: means to populate the binding table entries from the flash file.
| ||||
| Sipv6helperDhcpSnoopingBindingPersistencyStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP Snooping binding table persistency check status. By default, it is disabled. Once enabled, the binding entries expiry will be solely depend on Lease time
| ||||
| Tipv6helperStatTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13 | NA | ||
table · not-accessible · current This keeps statistics for DHCPv6 server address. | ||||
| Ripv6helperStatEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1 | NA | ||
row · not-accessible · current An entry in the stat table. | ||||
| Cipv6helperStatsServerAddress | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1.1 | InetAddressIPv6 | RO | |
column · InetAddressIPv6 · read-only · current This specifies the unique server address. | ||||
| Cipv6helperStatsVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1.2 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current It is the VLAN Id of the server for which stats displayed in case of vlan level relay configured. | ||||
| Cipv6helperTxToServer | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1.3 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current This keeps track of the number of packets transmitted to the server. | ||||
| Sipv6helperInterfaceIdPrefixValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.14 | DisplayString (SIZE (0..246)) | RW | |
scalar · DisplayString (SIZE (0..246)) · read-write · current The value of the string that will be added along with the standard interface id ((chassis group(1 byte), chassis id(1 byte), vlan(2 byte) and ifIndex(4 byte)) by the relay agent. | ||||
| Sipv6helperRemoteIdEnterpriseNumber | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.15 | Unsigned32 (1..4294967295) | RW | |
scalar · Unsigned32 (1..4294967295) · read-write · current The value of the Enterprise Number that will be used in the remote id sub options. | ||||
| Sipv6helperRemoteIdUserStringValue | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.16 | DisplayString (SIZE (0..63)) | RW | |
scalar · DisplayString (SIZE (0..63)) · read-write · current The value of the string that will be used in the remote id sub options. | ||||
| Sipv6helperRemoteIdFormatType | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCPv6 remote-id defines the type of information carried in remote id option fields. ipv6helperRemoteIdEnterpriseNumber should be configured before configuring specifying ipv6helperRemoteIdFormatType. If the type selected is string the actual value of the string can be found in ipv6helperRemoteIdUserStringValue.
| ||||
| Sipv6helperRxFromClient | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.18 | Unsigned32 (0..65535) | RO | |
scalar · Unsigned32 (0..65535) · read-only · current This keeps track of the number of packets recieved from the client. | ||||
| Sipv6helperMaxHopsViolation | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.19 | Unsigned32 (0..65535) | RO | |
scalar · Unsigned32 (0..65535) · read-only · current This keeps track of the number of packets dropped due to max hops violation. | ||||
| Sipv6helperResetAll | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current This parameter resets all the stats.
| ||||
| Tipv6helperSourceFilterVlanTable | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21 | NA | ||
table · not-accessible · current A list of vlans that have ipv6-source-filtering enabled. | ||||
| Ripv6helperSourceFilterVlanEntry | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21.1 | NA | ||
| Cipv6helperSourceFilterVlan | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21.1.1 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current The VLAN number identifying this instance. Valid range from 1 to 4094. | ||||
| Cipv6helperSourceFilterVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current IPV6 Source filtering status. Default value is disabled.
Once enabled, only the incoming traffic with the proper
client IPV6 address, MAC address , port and vlan will be allowed.
| ||||
| NalcatelIND1UDPRelayMIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2 | |||
node · current Branch For UDP Relay Subsystem Conformance Information. | ||||
| NalcatelIND1UDPRelayMIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1 | |||
node · current Branch For UDP Relay Subsystem Units Of Conformance. | ||||
| GiphelperGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.1 | |||
group · current Collection of objects for the management of parameters of UDP Relay.
| ||||
| GiphelperStatGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.2 | |||
group · current Collection of objects for management of statistics for UDP Relay. | ||||
| GiphelperMiscGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.3 | |||
group · current Other independent objects of UDP Relay.
| ||||
| GalaDhcpClientTrapsGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.4 | |||
group · current Collection of traps for management of DHCP Client | ||||
| GiphelperSourceGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.5 | |||
group · current Source filtering status at vlan level | ||||
| GiphelperOption82FormatASCIIConfigurableGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.6 | |||
group · current Collection of objects identifying option-32 for Circuit ID and Remote ID.
| ||||
| GalaDhcpClientTrapObjectsGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.7 | |||
group · current Objects used in UDP Relay Notifications | ||||
| GiphelperxGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.8 | |||
group · current An entry in UDP Relay PortAssociation table
| ||||
| Gipv6helperGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.9 | |||
group · current Collection of objects for the management of parameters of DHCPV6 Relay. | ||||
| Gipv6helperMiscGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.10 | |||
group · current Other independent objects of DHCPV6 Relay.
| ||||
| Gipv6helperSourceFilterGroup | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.11 | |||
| NalcatelIND1UDPRelayMIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.2 | |||
node · current Branch For UDP Relay Subsystem Compliance Statements. | ||||
| MalcatelIND1UDPRelayMIBCompliance | 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.2.1 | |||
compliance · current Compliance statement for UDP Relay | ||||
| NalaDhcpClientTrapsDesc | 1.3.6.1.4.1.6486.800.1.3.2.23.1 | |||
| !alaDhcpClientAddressAddTrap | 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.1 | |||
notification · current When new IP address is assigned to DHCP Client interface.
| ||||
| !alaDhcpClientAddressExpiryTrap | 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.2 | |||
notification · current When the lease time expires or when DHCP client not able to renew/rebind an IP address.
| ||||
| !alaDhcpClientAddressModifyTrap | 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.3 | |||
notification · current When the dhcp client not able to obtain the existing IP address and new IP address is assigned to the DHCP client. | ||||
| !alaDhcpBindingDuplicateEntry | 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.4 | |||
notification · current Trap to notify MAC Movement in DHCP-Binding Table Mac Address, Vlan, Previous ifIndex, Current ifIndex | ||||
| !alaDhcpBindingTcamFail | 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.5 | |||
notification · current Trap to notify DHCP Binding Failure due to TCAM resource failure.
| ||||
| !alaDhcpIsfDrop | 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.6 | |||
notification · current Trap message to notify ISF drop. | ||||
| NalaDhcpClientTrapsObj | 1.3.6.1.4.1.6486.800.1.3.2.23.2 | |||
| SalaDhcpClientAddress | 1.3.6.1.4.1.6486.800.1.3.2.23.2.1 | IpAddress | AN | |
scalar · IpAddress · accessible-for-notify · current This object specifies the current IP address of the DHCP client. | ||||
| SalaDhcpClientNewAddress | 1.3.6.1.4.1.6486.800.1.3.2.23.2.2 | IpAddress | AN | |
scalar · IpAddress · accessible-for-notify · current This object specifies the new IP address assigned for the DHCP client. | ||||
| SalaDhcpIsfDropIntervalStartTimeStamp | 1.3.6.1.4.1.6486.800.1.3.2.23.2.3 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current This object specifies the start time of this ISF drop monitoring interval. | ||||
| SalaDhcpIsfDropIntervalStopTimeStamp | 1.3.6.1.4.1.6486.800.1.3.2.23.2.4 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current This object specifies the end time of this ISF drop monitoring interval. This is the time at which the trap message will be initiated. | ||||
| SalaDhcpIsfDropCount | 1.3.6.1.4.1.6486.800.1.3.2.23.2.5 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current This object specifies the number of ISF drop in the time period specified by alaDhcpIsfDropIntervalStartTimeStamp and alaDhcpIsfDropIntervalStopTimeStamp. | ||||
| SalaDhcpTcamFailMsg | 1.3.6.1.4.1.6486.800.1.3.2.23.2.6 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current This object specifies binding fail due to TCAM Resource. | ||||
Textual conventions
IphelperOption82CircuitOrRemoteIdINTEGERcircuitid(1)remoteid(2)Circuit Id or Remote Id for Option 82 Format ASCII field.
IphelperServIndexINTEGERiphelperBootp(1)iphelperDns(4)iphelperNbdd(3)iphelperNbnsNbdd(2)iphelperNtp(7)iphelperOther1(8)iphelperOther10(17)iphelperOther2(9)iphelperOther3(10)iphelperOther4(11)iphelperOther5(12)iphelperOther6(13)iphelperOther7(14)iphelperOther8(15)iphelperOther9(16)iphelperTacacs(5)iphelperTftp(6)IphelperServIndex provides a means to specify a service to be forwarded by UDP Relay. Some values indicate a specfic protocol and associated UDP port(s): ---------------- ---------- ----------- Value Protocol UDP port(s) ---------------- ---------- ----------- iphelperBootp BOOTP/DHCP 67/68 iphelperNbnsNbdd NBNS/NBDD 137/138 iphelperNbdd NBDD 138 iphelperDns DNS 53 iphelperTacacs TACACS 65 iphelperTftp TFTP 69 iphelperNtp NTP 123 The remaining values are to be used for other services: ---------------- ---------- ----------- Value Protocol UDP port ---------------- ---------- ----------- iphelperOther1 ? user-specified iphelperOther2 ? user-specified iphelperOther3 ? user-specified iphelperOther4 ? user-specified iphelperOther5 ? user-specified iphelperOther6 ? user-specified iphelperOther7 ? user-specified iphelperOther8 ? user-specified iphelperOther9 ? user-specified iphelperOther10 ? user-specifiedIphelpereOption82ASCIIFieldTypeINTEGERcvlan(7)interface(6)interfaceAlias(4)macAddress(1)none(0)portAlias(8)systemName(2)userString(3)vlan(5)Ip helper Option 82 Format ASCII field type
Traps / Notifications
- alaDhcpBindingDuplicateEntry
1.3.6.1.4.1.6486.800.1.3.2.23.1.0.4 - alaDhcpBindingTcamFail
1.3.6.1.4.1.6486.800.1.3.2.23.1.0.5 - alaDhcpClientAddressAddTrap
1.3.6.1.4.1.6486.800.1.3.2.23.1.0.1 - alaDhcpClientAddressExpiryTrap
1.3.6.1.4.1.6486.800.1.3.2.23.1.0.2 - alaDhcpClientAddressModifyTrap
1.3.6.1.4.1.6486.800.1.3.2.23.1.0.3 - alaDhcpIsfDrop
1.3.6.1.4.1.6486.800.1.3.2.23.1.0.6