ALCATEL-IND1-SYSTEM-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-SYSTEM-MIB <host> 1.3.6.1.4.1.6486.800.1.1.1.2.1Imports
| ALCATEL-IND1-BASE | hardentIND1System |
|---|---|
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IalcatelIND1SystemMIB | 1.3.6.1.4.1.6486.800.1.1.1.2.1 | ||||||||||||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | |||||||||||||
| NalcatelIND1SystemMIBObjects | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1 | ||||||||||||
node · current Branch For BOP Proprietary System Subsystem Managed Objects. | |||||||||||||
| NsystemMicrocode | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1 | ||||||||||||
| TsystemMicrocodeTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1 | NA | |||||||||||
table · not-accessible · current This table contains one row per set of microcode objects. There is always at least one set of microcode objects for each CMM System Module | |||||||||||||
| RsystemMicrocodeEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1.1 | NA | |||||||||||
| CsystemMicrocodeIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1.1.1 | MicrocodeDirectoryIndex | RO | ||||||||||
column · MicrocodeDirectoryIndex · read-only · current The index to the highest level of the microcode table. This level is organized by the directory being referenced. | |||||||||||||
| TsystemMicrocodePackageTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2 | NA | |||||||||||
table · not-accessible · current the microcode package table | |||||||||||||
| RsystemMicrocodePackageEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1 | NA | |||||||||||
row · not-accessible · current a row in the microcode package table | |||||||||||||
| CsystemMicrocodePackageIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The index to the package sub table in the microcode table | |||||||||||||
| CsystemMicrocodePackageVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.2 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The version of the microcode package (Fos.img, Fbase.img, etc.) | |||||||||||||
| CsystemMicrocodePackageName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.3 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The name of the microcode package | |||||||||||||
| CsystemMicrocodePackageDescription | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.4 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The description of the microcode package | |||||||||||||
| CsystemMicrocodePackageStatus | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the microcode package
| |||||||||||||
| CsystemMicrocodePackageSize | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The size of the microcode package | |||||||||||||
| TsystemMicrocodeComponentTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3 | NA | |||||||||||
table · not-accessible · current the microcode Component table | |||||||||||||
| RsystemMicrocodeComponentEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1 | NA | |||||||||||
row · not-accessible · current a row in the microcode Component table | |||||||||||||
| CsystemMicrocodeComponentIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The index to the Component sub table in the microcode table | |||||||||||||
| CsystemMicrocodeComponentVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.2 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The version of the microcode Component | |||||||||||||
| CsystemMicrocodeComponentName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.3 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The name of the microcode Component | |||||||||||||
| CsystemMicrocodeComponentDescription | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.4 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The description of the microcode Component | |||||||||||||
| CsystemMicrocodeComponentStatus | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the microcode Component
| |||||||||||||
| CsystemMicrocodeComponentSize | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The size of the microcode Component | |||||||||||||
| TsystemMicrocodeDependencyTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4 | NA | |||||||||||
table · not-accessible · current the microcode Dependency table | |||||||||||||
| RsystemMicrocodeDependencyEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1 | NA | |||||||||||
row · not-accessible · current a row in the microcode Dependency table | |||||||||||||
| CsystemMicrocodeDependencyIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The index to the Dependency sub table in the microcode table | |||||||||||||
| CsystemMicrocodeDependencyPackageName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1.2 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The name of the microcode Package Dependency | |||||||||||||
| CsystemMicrocodeDependencyVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1.3 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The version of the microcode Dependency | |||||||||||||
| NsystemBootParams | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2 | ||||||||||||
| SsystemBootNetwork | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2.1 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current this object is the base IP address of the EMP for this CMM | |||||||||||||
| SsystemBootNetworkGateway | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current this object is the gateway of the EMP for this CMM | |||||||||||||
| SsystemBootNetworkNetmask | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current This is the Netmask of the EMP that is used when this CMM boots. | |||||||||||||
| NsystemHardware | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3 | ||||||||||||
| SsystemHardwareFlashMfg | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object identifies the manufacturer of the Flash memory used on this product. toshiba(7) is for hawk only. The reason 7 is used is because 5 is already used for micron and 6 is for kingston. toshiba, sandisk, and sst are compact flashes for the hawk only.
| |||||||||||||
| SsystemHardwareFlashSize | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This object identifies the size of the flash memory available on this CMM. It is the total flash hardware memory and does not indicate how much of the memory is free, used, etc. | |||||||||||||
| SsystemHardwareMemoryMfg | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object identifies the manufacturer of the RAM memory used on this CMM.
| |||||||||||||
| SsystemHardwareMemorySize | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.4 | Unsigned32 | RO | 536870912 | |||||||||
scalar · Unsigned32 · read-only · current This object identifies the size of the RAM memory available on this CMM. It is the total RAM hardware memory and does not indicate how much of the memory is free, used, etc. Example values from LibreNMS test devices
| |||||||||||||
| SsystemHardwareNVRAMBatteryLow | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.5 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies the whether the NVRAM battery is low. true(1), false(2) | |||||||||||||
| SsystemHardwareBootCpuType | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the manufacturer and model number of the CPU. Currently, only two types of processors are enumerated.
| |||||||||||||
| SsystemHardwareJumperInterruptBoot | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.7 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Interrupt Boot Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| SsystemHardwareJumperForceUartDefaults | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.8 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Force Uart Defaults Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| SsystemHardwareJumperRunExtendedMemoryDiagnostics | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.9 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Run Extended Memory Diagnostics Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| SsystemHardwareJumperSpare | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.10 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current This object identifies whether the Spare Jumper on this CMM is set: True(1), False(2) | |||||||||||||
| TsystemHardwareFpgaVersionTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11 | NA | |||||||||||
table · not-accessible · current This table contains the FPGA version for each FPGA on this CMM | |||||||||||||
| RsystemHardwareFpgaVersionEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11.1 | NA | |||||||||||
row · not-accessible · current a row in the systemHardwareFpgaVersionTable | |||||||||||||
| CsystemHardwareFpgaVersionIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11.1.1 | INTEGER (1..3) | RO | ||||||||||
column · INTEGER (1..3) · read-only · current This is the index to one of the FPGA versions on this CMM | |||||||||||||
| CsystemHardwareFpgaVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This is the major version of one of the FPGA devices on this CMM | |||||||||||||
| SsystemHardwareBootRomVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.12 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the boot rom version | |||||||||||||
| SsystemHardwareBackupMiniBootVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.13 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the backup miniboot version. | |||||||||||||
| SsystemHardwareDefaultMiniBootVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.14 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the default miniboot version. | |||||||||||||
| SsystemHardwareMinorFpgaVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.15 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the minor FPGA version. | |||||||||||||
| SsystemHardwareCpldVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.16 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the CPLD version. | |||||||||||||
| SsystemHardwareUbootVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.17 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the Uboot version. | |||||||||||||
| SsystemHardwareProdRegId | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.18 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the product ID register | |||||||||||||
| SsystemHardwareRevisionRegister | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.19 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the hardware revision register | |||||||||||||
| SsystemHardwareXfpId | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.20 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the XFP ID | |||||||||||||
| SsystemHardwareUbootMinibootVersion | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.21 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current A string that identifies the Uboot-miniboot version. | |||||||||||||
| NsystemFileSystem | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4 | ||||||||||||
| TsystemFileSystemTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1 | NA | |||||||||||
table · not-accessible · current system file system table for this CMM. | |||||||||||||
| RsystemFileSystemEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1 | NA | |||||||||||
| CsystemFileSystemIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1.1 | FileSystemIndex | RO | ||||||||||
column · FileSystemIndex · read-only · current Index to a specific file system. | |||||||||||||
| CsystemFileSystemName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1.2 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The name of the file system. | |||||||||||||
| CsystemFileSystemFreeSpace | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current the free space in octets of this file system | |||||||||||||
| SsystemFileSystemDirectoryName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.2 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current The name of a file system directory. This object is used in conjunction with an Action command. The Action command will set this directory name to the name of a specific directory. Information for all of the files in that directory will then be read from the file system and the appropriate values written in the entries in the systemFileSystemFile table. All this is being done to give snmp access to the file system files. | |||||||||||||
| SsystemFileSystemDirectoryDateTime | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.3 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current the date and time (in system format) of the last access to this directory | |||||||||||||
| TsystemFileSystemFileTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4 | NA | |||||||||||
table · not-accessible · current system file system File table for this CMM. This table is used by an Action command which will populate it with file information read from the files in the specified directory. | |||||||||||||
| RsystemFileSystemFileEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1 | NA | |||||||||||
row · not-accessible · current A row in the system file system File table | |||||||||||||
| CsystemFileSystemFileIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Index to a specific file system File. | |||||||||||||
| CsystemFileSystemFileName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.2 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The name of a file system File | |||||||||||||
| CsystemFileSystemFileType | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.3 | SystemFileType | RO | ||||||||||
column · SystemFileType · read-only · current The Type of a file system File | |||||||||||||
| CsystemFileSystemFileSize | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current size of this file | |||||||||||||
| CsystemFileSystemFileAttr | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current attributes of this file
| |||||||||||||
| CsystemFileSystemFileDateTime | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.6 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current the modification date and time of a file | |||||||||||||
| NsystemServices | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5 | ||||||||||||
| SsystemServicesDate | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.1 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current This object contains the current System Date in the following format: MM/DD/YYYY | |||||||||||||
| SsystemServicesTime | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.2 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current This object contains the current System Time in the following format: HH:MM:SS | |||||||||||||
| SsystemServicesTimezone | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.3 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current This object contains the current Hour Offset from UTC in the following format: -13:00 to +12:00 OR a well known timezone (PST,CST,etc.) | |||||||||||||
| SsystemServicesTimezoneStartWeek | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.4 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current first, second, third, fourth, fifth, last = 1,2,3,4,5,6 | |||||||||||||
| SsystemServicesTimezoneStartDay | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.5 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Sunday, Monday, Tues... = 1,2,3,4,5,6,7 | |||||||||||||
| SsystemServicesTimezoneStartMonth | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.6 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current January, February, march... = 1,2,3,4,5,67,8,9,10,11,12 | |||||||||||||
| SsystemServicesTimezoneStartTime | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.7 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current 2:00, 3:00, 4:00... = 200, 300, 400, etc. | |||||||||||||
| SsystemServicesTimezoneOffset | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.8 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current 60 minutes = 60 | |||||||||||||
| SsystemServicesTimezoneEndWeek | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.9 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current first, second, third, fourth, fifth, last = 1,2,3,4,5,6 | |||||||||||||
| SsystemServicesTimezoneEndDay | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.10 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Sunday, Monday, Tues... = 1,2,3,4,5,6,7 | |||||||||||||
| SsystemServicesTimezoneEndMonth | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.11 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12 | |||||||||||||
| SsystemServicesTimezoneEndTime | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.12 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current 2:00, 3:00, 4:00... = 200, 300, 400, etc. | |||||||||||||
| SsystemServicesEnableDST | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.13 | Enable | RW | ||||||||||
scalar · Enable · read-write · current This object enables and disables the DST. | |||||||||||||
| SsystemServicesWorkingDirectory | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.14 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current This object contains the current file system working directory for this CMM. For example, /flash/certified | |||||||||||||
| SsystemServicesArg1 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.15 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 1st argument for system services action routines | |||||||||||||
| SsystemServicesArg2 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.16 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 2nd argument for system services action routines | |||||||||||||
| SsystemServicesArg3 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.17 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 3rd argument for system services action routines | |||||||||||||
| SsystemServicesArg4 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.18 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 4th argument for system services action routines | |||||||||||||
| SsystemServicesArg5 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.19 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 5th argument for system services action routines | |||||||||||||
| SsystemServicesArg6 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.20 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 6th argument for system services action routines | |||||||||||||
| SsystemServicesArg7 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.21 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 7th argument for system services action routines | |||||||||||||
| SsystemServicesArg8 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.22 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 8th argument for system services action routines | |||||||||||||
| SsystemServicesArg9 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.23 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current the 9th argument for system services action routines | |||||||||||||
| SsystemServicesAction | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object identifies which of the above Actions is to be performed by the System Services Application. Most Actions require one or more parameters be set before the Action is executed. systemServicesAction - 26 for bootrom, 27 for default miniboot, and 28 for backup miniboot use systemServicesArg1 for name of the file scp- the first 2 arguments are going to be used. Set arg 1 with the source and the arg 2 with the destination file(s). E.g. scp LocalDir/testfileX.txt [email protected]:RemoteDir/testfileX.txt For mount and umount, systemServicesArg1 specifies the mount point (such as /uflash). For newfs, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be created. On /uflash, a FAT16 file system is created with long name naming conventions. For fsck, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be checked and systemServicesArg2 will contain the string repair or no-repair depending on if autocorrection is requested. To see all file systems currently mounted, refer to the systemFileSystemTable. For backup and restore, systemServicesArg1 contains the archive name and systemServicesArg2 through Arg9 contains the directories and/or files to be archived/extracted. For newfs, fsck, backup and restore, the systemServicesActionPercentComplete variable can be inspected to see a progress indication.
| |||||||||||||
| SsystemServicesResultCode | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.25 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current the result of a system services application | |||||||||||||
| SsystemServicesResultString | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.26 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current the string result of a system services application | |||||||||||||
| SsystemServicesKtraceEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.27 | Enable | RW | ||||||||||
scalar · Enable · read-write · current enables/disables the Ktrace facility | |||||||||||||
| SsystemServicesSystraceEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.28 | Enable | RW | ||||||||||
scalar · Enable · read-write · current enables/disables the Systrace facility | |||||||||||||
| SsystemServicesTtyLines | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.29 | Unsigned32 (0..255) | RO | ||||||||||
scalar · Unsigned32 (0..255) · read-only · current the number of tty lines for a console screen | |||||||||||||
| SsystemServicesTtyColumns | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.30 | Unsigned32 (0..255) | RO | ||||||||||
scalar · Unsigned32 (0..255) · read-only · current the number of tty columns for a console screen | |||||||||||||
| SsystemServicesMemMonitorEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.31 | Enable | RW | ||||||||||
scalar · Enable · read-write · current disables/enables the kernel Memory Monitor feature | |||||||||||||
| TsystemServicesKtraceLevelTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32 | NA | |||||||||||
table · not-accessible · current the table of Ktrace severity level settings | |||||||||||||
| RsystemServicesKtraceLevelEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32.1 | NA | |||||||||||
row · not-accessible · current A row in the system services ktrace level table. There is one entry for each possible Application ID | |||||||||||||
| CsystemServicesKtraceLevelAppId | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32.1.1 | AppIdIndex | RO | ||||||||||
column · AppIdIndex · read-only · current the index into the ktrace level table | |||||||||||||
| CsystemServicesKtraceLevel | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32.1.2 | SeverityLevel | RW | ||||||||||
column · SeverityLevel · read-write · current the ktrace level for a specific Application ID | |||||||||||||
| TsystemServicesSystraceLevelTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33 | NA | |||||||||||
table · not-accessible · current the table of Systrace severity level settings | |||||||||||||
| RsystemServicesSystraceLevelEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33.1 | NA | |||||||||||
row · not-accessible · current A row in the system services systrace level table. There is one entry for each possible Application ID | |||||||||||||
| CsystemServicesSystraceLevelAppId | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33.1.1 | AppIdIndex | RO | ||||||||||
column · AppIdIndex · read-only · current the Systrace level for a specific Application ID. | |||||||||||||
| CsystemServicesSystraceLevel | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33.1.2 | SeverityLevel | RW | ||||||||||
column · SeverityLevel · read-write · current the Systrace level for a specific Application ID. | |||||||||||||
| TsystemUpdateStatusTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34 | NA | |||||||||||
table · not-accessible · current Provides update status for firmware updates | |||||||||||||
| RsystemUpdateStatusEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1 | NA | |||||||||||
| CsystemUpdateIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1.1 | INTEGER (1..72) | NA | ||||||||||
column · INTEGER (1..72) · not-accessible · current The index to the CMM for which status is required. | |||||||||||||
| CsystemUpdateStatus | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of a firmware update. In the case of doneNok, further information can be obtained from systemUpdateErrorCode.
| |||||||||||||
| CsystemUpdateErrorCode | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Error codes for done_nok.
| |||||||||||||
| SsystemServicesActionPercentComplete | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.35 | CommandPercentComplete | RO | ||||||||||
scalar · CommandPercentComplete · read-only · current This object identifies the percent completion of the currently executing systemServicesAction. | |||||||||||||
| SsystemServicesCurrentArchivePathName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.36 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current This object identifies the archive currently being read via the systemServicesArchiveTable. This object is the complete pathname to the archive and must be set prior to reading the systemServicesArchiveTable. | |||||||||||||
| TsystemServicesArchiveTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37 | NA | |||||||||||
table · not-accessible · current This table contains the contents of a backup archive. This table is used by the restore action command to display (rather than backup) an archive. The restore command will populate this table with archive information read from the archive specified by the systemServicesAction restore command. This is done as follows. Set the systemServicesArg1 object to the archive name to be read. Set the systemServicesArg2 object to the string: display-only. Set the systemServicesAction object to restore. Then read this table. | |||||||||||||
| RsystemServicesArchiveEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1 | NA | |||||||||||
row · not-accessible · current A row in the system services archive table. | |||||||||||||
| CsystemServicesArchiveIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Index to a specific entry in the backup archive file. | |||||||||||||
| CsystemServicesArchiveName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.2 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The name of a file in the backup archive file. | |||||||||||||
| CsystemServicesArchiveType | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.3 | SystemFileType | RO | ||||||||||
column · SystemFileType · read-only · current The type of a file in the backup archive file. | |||||||||||||
| CsystemServicesArchiveSize | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The size of a file in the backup archive file. | |||||||||||||
| CsystemServicesArchiveAttr | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The attributes of a file in the backup archive file.
| |||||||||||||
| SsystemServicesUsbEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.38 | Enable | RW | ||||||||||
scalar · Enable · read-write · current disable/enable the USB interface | |||||||||||||
| SsystemServicesUsbAutoCopyEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.39 | Enable | RW | ||||||||||
scalar · Enable · read-write · current disable/enable the USB auto-copy facility | |||||||||||||
| SsystemServicesUsbDisasterRecoveryEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.40 | Enable | RW | ||||||||||
scalar · Enable · read-write · current disable/enable the USB disaster-recovery factility | |||||||||||||
| SsystemServicesFipsEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.41 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable or disable the FIPS mode on AOS switches The default value is disabled. | |||||||||||||
| SsystemServicesFipsStatus | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.42 | Enable | RO | ||||||||||
scalar · Enable · read-only · current Status of the FIPS mode on AOS switches | |||||||||||||
| SsystemServicesArg10 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.43 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Argument for storing the VRF id | |||||||||||||
| SsystemServicesCommonCriteriaEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.44 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable or disable the Common Criteria mode on AOS switches The default value is disabled. | |||||||||||||
| SsystemServicesCommonCriteriaStatus | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.45 | Enable | RO | ||||||||||
scalar · Enable · read-only · current Status of the Common Criteria mode on AOS switches | |||||||||||||
| NsystemSwitchLogging | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6 | ||||||||||||
| SsystemSwitchLoggingIndex | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.1 | SwitchLoggingIndex | RO | ||||||||||
scalar · SwitchLoggingIndex · read-only · current A small positive integer used to identify a switch logging output | |||||||||||||
| SsystemSwitchLoggingEnable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.2 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Global switch logging enable/disable | |||||||||||||
| SsystemSwitchLoggingFlash | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.3 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging to flash | |||||||||||||
| SsystemSwitchLoggingSocket | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.4 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging to a socket | |||||||||||||
| SsystemSwitchLoggingSocketIpAddr | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.5 | IpAddress | RW | deprecated | |||||||||
scalar · IpAddress · read-write · deprecated The IP Address of a remote host that can be used to send switch logging records to as an option | |||||||||||||
| SsystemSwitchLoggingConsole | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.6 | Enable | RW | ||||||||||
scalar · Enable · read-write · current Enable/disable switch logging to the console | |||||||||||||
| TsystemSwitchLoggingLevelTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7 | NA | |||||||||||
table · not-accessible · current The table of switch logging level settings, one for each Application ID | |||||||||||||
| RsystemSwitchLoggingLevelEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7.1 | NA | |||||||||||
row · not-accessible · current A row in the system switch logging level table | |||||||||||||
| CsystemSwitchLoggingLevelAppId | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7.1.1 | AppIdIndex | RO | ||||||||||
column · AppIdIndex · read-only · current A specific application ID which has a severity level associated with it. This application ID is used as an index into the level table. | |||||||||||||
| CsystemSwitchLoggingLevel | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7.1.2 | SeverityLevel | RW | ||||||||||
column · SeverityLevel · read-write · current The logging level for a specific application id. | |||||||||||||
| SsystemSwitchLoggingClear | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.8 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Enable clearing of switch logging entries | |||||||||||||
| SsystemSwitchLoggingFileSize | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.9 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Set size of swlog logging file | |||||||||||||
| TsystemSwitchLoggingHostTable | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10 | NA | |||||||||||
table · not-accessible · current The table of switch logging remote hosts. | |||||||||||||
| RsystemSwitchLoggingHostEntry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1 | NA | |||||||||||
row · not-accessible · current A remote switch logging server entry. | |||||||||||||
| CsystemSwitchLoggingHostIpAddr | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.1 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The IP Address of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostPort | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.2 | INTEGER (1..65535) | RC | ||||||||||
column · INTEGER (1..65535) · read-create · current The port number of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostStatus | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Provides the ability to add or remove a remote host entry. | |||||||||||||
| CsystemSwitchLoggingHostUserCommandHost | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.4 | Enable | RC | ||||||||||
column · Enable · read-create · current Indicates whether this host may receive user command data. | |||||||||||||
| TsystemSwitchLoggingHostv6Table | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11 | NA | |||||||||||
table · not-accessible · current The table of switch logging remote hosts. | |||||||||||||
| RsystemSwitchLoggingHostv6Entry | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1 | NA | |||||||||||
row · not-accessible · current A remote switch logging server entry. | |||||||||||||
| CsystemSwitchLoggingHostv6IpAddr | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.1 | Ipv6Address | RO | ||||||||||
column · Ipv6Address · read-only · current The IP Address of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostv6Port | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.2 | INTEGER (1..65535) | RC | ||||||||||
column · INTEGER (1..65535) · read-create · current The port number of a remote host that can be used to send switch logging records to. | |||||||||||||
| CsystemSwitchLoggingHostv6Status | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Provides the ability to add or remove a remote host entry. | |||||||||||||
| CsystemSwitchLoggingHostv6UserCommandHost | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.4 | Enable | RC | ||||||||||
column · Enable · read-create · current Indicates whether this host may receive user command data. | |||||||||||||
| SsystemSwitchLoggingHostCount | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.12 | INTEGER (0..4) | RO | ||||||||||
scalar · INTEGER (0..4) · read-only · current The number of remote hosts currently defined. | |||||||||||||
| SsystemSwitchLoggingConsoleLevel | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.13 | SeverityLevel | RC | ||||||||||
scalar · SeverityLevel · read-create · current Messages whose severity level is equal to or more severe than this value will be displayed to the console. | |||||||||||||
| SsystemSwitchLoggingUserCommandStatus | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.14 | Enable | RC | ||||||||||
scalar · Enable · read-create · current User commands will be logged to remote hosts when enabled. | |||||||||||||
| SsystemSwitchLoggingSysLogFacilityId | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.15 | SysLogFacilityId | RW | ||||||||||
scalar · SysLogFacilityId · read-write · current This textual convention enumerates the facilities that originate syslog messages. The Facilities of syslog messages are numerically coded with decimal values. Some of the operating system daemons and processes are traditionally designated by the Facility values given below. Daemons and processes that do not have an explicitly assigned Facility may use any of the 'local use' Facilities or they may use the 'user-level' Facility. For interoperability and backwards compatibility reasons, mapping specified in this document between a label which represents a Facility and the value which represents the corresponding code, is normative. So the mapping from a label configured by operators in syslog.conf or equivalent will consistently map to the same Facility code regardless of implementation, but the label itself is often semantically meaningless, because it is impractical to attempt to enumerate all possible facilities, and the enumeration (label and corresponding value) that is used by an actual Facility is, and has historically been, implementation-dependent. For example, the foobar application might log messages as having come from local7, even though there is no 'local' process on the device, and the operator can configure syslog.conf to have local7.critical messages be relayed, even though there might be multiple facilities using Facility local7. This is typical current practice, and originators, relays and collectors know how to handle this situation. For improved accuracy, the foobar application can also include an APPNAME Structured Data Element. | |||||||||||||
| SsystemSwlogViewPassword | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.16 | DisplayString (SIZE (0..32)) | RC | ||||||||||
scalar · DisplayString (SIZE (0..32)) · read-create · current Password to be used for authenticating swlog view for registered user | |||||||||||||
| NsystemDNS | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7 | ||||||||||||
| SsystemDNSEnableDnsResolver | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.1 | Enable | RC | ||||||||||
scalar · Enable · read-create · current Global Domain Name Service enable/disable | |||||||||||||
| SsystemDNSDomainName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.2 | DisplayString (SIZE (0..255)) | RC | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-create · current current domain name used by the Domain Name Service | |||||||||||||
| SsystemDNSNsAddr1 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.3 | IpAddress | RC | ||||||||||
scalar · IpAddress · read-create · current 1st part of address used by the Domain Name Service | |||||||||||||
| SsystemDNSNsAddr2 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.4 | IpAddress | RC | ||||||||||
scalar · IpAddress · read-create · current 2nd part of address used by the Domain Name Service | |||||||||||||
| SsystemDNSNsAddr3 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.5 | IpAddress | RC | ||||||||||
scalar · IpAddress · read-create · current 3rd part of address used by the Domain Name Service | |||||||||||||
| SsystemDNSNsIPv6Addr1 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.6 | Ipv6Address | RC | ||||||||||
scalar · Ipv6Address · read-create · current IPv6 address of the Primary DNS server | |||||||||||||
| SsystemDNSNsIPv6Addr2 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.7 | Ipv6Address | RC | ||||||||||
scalar · Ipv6Address · read-create · current IPv6 address of the Secondary DNS server | |||||||||||||
| SsystemDNSNsIPv6Addr3 | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.8 | Ipv6Address | RC | ||||||||||
scalar · Ipv6Address · read-create · current IPv6 address of the third DNS server | |||||||||||||
| NsystemSignature | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8 | ||||||||||||
| SsystemSignatureCertified | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The signature of certified directory | |||||||||||||
| SsystemSignatureWorking | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The signature of working directory | |||||||||||||
| SsystemSignatureIssu | 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The signature of Issu directory | |||||||||||||
| NalcatelIND1SystemMIBConformance | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Conformance Information. | |||||||||||||
| NalcatelIND1SystemMIBGroups | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Units Of Conformance. | |||||||||||||
| GsystemMicrocodeGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.1 | ||||||||||||
group · current Group all the system microcode objects together
| |||||||||||||
| GsystemBootParamsGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.2 | ||||||||||||
group · current Group all the system boot parameters together | |||||||||||||
| GsystemHardwareGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.3 | ||||||||||||
group · current Group all the system Hardware Data together
| |||||||||||||
| GsystemServicesGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.4 | ||||||||||||
group · current Group all the system services parameters together
| |||||||||||||
| GsystemFileSystemGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.5 | ||||||||||||
group · current Group all the system flash file parameters together
| |||||||||||||
| GsystemSwitchLoggingGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.6 | ||||||||||||
group · current Group all the switch logging parameters together
| |||||||||||||
| GsystemDNSGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.7 | ||||||||||||
group · current Group all the systemDNS parameters together | |||||||||||||
| GsystemSwitchLoggingHostGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.8 | ||||||||||||
group · current A remote switch logging server entry.
| |||||||||||||
| GsystemSignatureGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.9 | ||||||||||||
group · current Group the signature of all directories together. | |||||||||||||
| GsystemNotificationGroup | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.10 | ||||||||||||
| NalcatelIND1SystemMIBCompliances | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.2 | ||||||||||||
node · current Branch For Alcatel IND BOP Proprietary System Subsystem Compliance Statements. | |||||||||||||
| MalcatelIND1SystemMIBCompliance | 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.2.1 | ||||||||||||
compliance · current Compliance statement for Alcatel BOP Proprietary System Subsystem. | |||||||||||||
| NalcatelIND1SystemTrapObjects | 1.3.6.1.4.1.6486.800.1.1.1.2.1.3 | ||||||||||||
| SsystemSwlogName | 1.3.6.1.4.1.6486.800.1.1.1.2.1.3.1 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current SWLOG file name whose size exceeded preconfigured value | |||||||||||||
| NalaSystemMgrTraps | 1.3.6.1.4.1.6486.800.1.1.1.2.1.4 | ||||||||||||
| !systemSwlogSizeTrap | 1.3.6.1.4.1.6486.800.1.1.1.2.1.4.0.1 | ||||||||||||
notification · current The size of the specified file has exceeded 90 percent of preconfigured value, please do back up before getting overwritten.
| |||||||||||||
Textual conventions
AppIdIndexINTEGER (0..254)a small positive integer used to index into tables arranged by Application ID's.
CommandPercentCompleteINTEGER (0..100)An indication of percent complete for a command.
EnableINTEGERdisabled(2)enabled(1)an enumerated value used to indicate whether an entity is enabled(1), or disabled(2)
FileSystemIndexINTEGERflash(1)uflash(2)an enumerated value which provides an indication of the file system. The value is a small positive integer indicating the type of the file system
MicrocodeDirectoryIndexINTEGERcertified(2)loaded(1)working(3)a small positive integer used to index into the Microcode table
SeverityLevelINTEGERseverityLevelAlarm(2)severityLevelAlert(4)severityLevelDbg1(7)severityLevelDbg2(8)severityLevelDbg3(9)severityLevelError(3)severityLevelInfo(6)severityLevelOff(1)severityLevelWarn(5)an enumerated value which provides an indication of the severity level used for logging and debug purposes. The value is a small integer.
SwitchLoggingIndexINTEGERconsole(1)flash(2)ipaddr(4)socket(3)a small positive integer used to identify switch logging outputs
SysLogFacilityIdINTEGERclock1(23)clock2(22)ftp(21)kernel(20)local0(19)local1(18)local2(17)local3(16)local4(15)local5(14)local6(13)local7(12)logAlert(11)logAudit(10)lptr(9)mail(8)netNews(7)ntp(6)secAuth1(5)secAuth2(4)syslog(3)system(2)user(1)uucp(0)SystemFileTypeINTEGERdirectory(2)file(1)tarArchive(4)undefined(3)a small positive integer used to identify file types
Traps / Notifications
- systemSwlogSizeTrap
1.3.6.1.4.1.6486.800.1.1.1.2.1.4.0.1