ALCATEL-IND1-SESSION-MGR-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
User Sessions Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-SESSION-MGR-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-SESSION-MGR-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.7.1Imports
| ALCATEL-IND1-BASE | softentIND1Sesmgr, switchMgtTraps |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1SessionMgrMIB | 1.3.6.1.4.1.6486.800.1.2.1.7.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
User Sessions Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1SessionMgrMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1 | |||
node · current Branch For Session Manager Subsystem Managed Objects. | ||||
| NsessionMgr | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1 | |||
| TsessionConfigTable | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1 | NA | ||
table · not-accessible · current The configuration parameters of a user session. | ||||
| RsessionConfigEntry | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1.1 | NA | ||
| CsessionType | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the session interface.
| ||||
| CsessionBannerFileName | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1.1.2 | DisplayString (SIZE (0..255)) | RW | |
column · DisplayString (SIZE (0..255)) · read-write · current Optional Banner File Name. For CLI, HTTP, and FTP sessions only. | ||||
| CsessionInactivityTimerValue | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1.1.3 | INTEGER (1..596523) | RW | |
column · INTEGER (1..596523) · read-write · current The inactivity timer value for this type of session, in minutes. | ||||
| CsessionDefaultPromptString | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1.1.4 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current Prompt string. For CLI sessions only. | ||||
| CsessionDefaultPromptSysName | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1.1.5 | Integer32 (0..1) | RW | |
column · Integer32 (0..1) · read-write · current Prompt system-name. For CLI sessions only. | ||||
| CsessionDefaultPromptSuffix | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.1.1.6 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current Prompt Suffix. For CLI sessions only. | ||||
| TsessionActiveTable | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2 | NA | ||
table · not-accessible · current A list of active users sessions. | ||||
| RsessionActiveEntry | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1 | NA | ||
| CsessionIndex | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.1 | INTEGER (0..63) | RO | |
column · INTEGER (0..63) · read-only · current The index of the session. | ||||
| CsessionAccessType | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The access type of the session.
| ||||
| CsessionPhysicalPort | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The physical port type of the session. notSignificant : use for console port or when information is not available, emp : ethernet port on the CMM board, ni : ethernet port on a NI coupler board.
| ||||
| CsessionUserName | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.4 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current The user name of the user logged-in. | ||||
| CsessionUserReadPrivileges | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.5 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The read privileges of the user logged-in. These privileges are stored as a bitmap. Each bit represents a command family. The number of families may go up to 64. Applied for functional authorization (partitioned management). | ||||
| CsessionUserWritePrivileges | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.6 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The write privileges of the user logged-in. These privileges are stored as a bitmap. Each bit represents a command family. The number of families may go up to 64. Applied for functional authorization (partitioned management). | ||||
| CsessionUserProfileName | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.7 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current The profile name of the user logged-in. Applied for the end-user partitioned management. | ||||
| CsessionUserIpAddress | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.8 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the user logged-in. | ||||
| CsessionRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.2.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. An entry in this table is dynamically created when a user connects to the switch (through console, telnet, ftp or http). The only value supported for set is destroy(6), to kill a user session. | ||||
| SsessionLoginTimeout | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.3 | INTEGER (5..600) | RW | |
scalar · INTEGER (5..600) · read-write · current At login time, it is the time in seconds to get the password, after the username has been keyed in. | ||||
| SsessionLoginAttempt | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.4 | INTEGER (1..10) | RW | |
scalar · INTEGER (1..10) · read-write · current The maximum number of login attempts for one session. | ||||
| SsessionCliCommandLogEnable | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current CLI command logging status. Enable(1) will save all CLI set command activilies on flash memory. Disable(2) will stop the record
| ||||
| SsessionXonXoffEnable | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable xon-xoff flow control on console port
| ||||
| TsessionAccessTable | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.7 | NA | ||
table · not-accessible · current The configuration parameters of a service. | ||||
| RsessionAccessEntry | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.7.1 | NA | ||
| CsessionServiceType | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the service.
| ||||
| CsessionReauthInterval | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.7.1.2 | Integer32 (0..60) | RW | |
column · Integer32 (0..60) · read-write · current reauth-interval defines the authentication refresh period for the session. Reauth-interval of 0 indicates re-authentication disabled for that session.
| ||||
| SsessionConsoleStatus | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or disable Console CLI shell
| ||||
| SsessionCliAutoCompleteSpace | 1.3.6.1.4.1.6486.800.1.2.1.7.1.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable or diable the cli automation using space key. Default is disabled.
| ||||
| NalcatelIND1SessionMgrMIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2 | |||
node · current Branch For Session Manager Subsystem Conformance Information. | ||||
| NalcatelIND1SessionMgrMIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.1 | |||
node · current Branch For Session Manager Subsystem Units Of Conformance. | ||||
| GsessionConfigGroup | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.1.1 | |||
group · current Collection of objects for management of Session Manager. | ||||
| GsessionActiveGroup | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.1.2 | |||
group · current Collection of objects for management of users sessions. | ||||
| GsessionTrapsGroup | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.1.3 | |||
group · current Collection of Traps for management of users sessions.
| ||||
| GsessionAccessGroup | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.1.4 | |||
| GsessionMgrGroup | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.1.5 | |||
group · current Collection of objects for Session Manager global configuration. | ||||
| NalcatelIND1SessionMgrMIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.2 | |||
node · current Branch For Session Manager Subsystem Compliance Statements. | ||||
| MalcatelIND1SessionMgrMIBCompliance | 1.3.6.1.4.1.6486.800.1.2.1.7.1.2.2.1 | |||
compliance · current Compliance statement for Session Manager Subsystem. | ||||
| NswitchMgtTrapsDesc | 1.3.6.1.4.1.6486.800.1.3.2.11.1 | |||
| !sessionAuthenticationTrap | 1.3.6.1.4.1.6486.800.1.3.2.11.1.0.1 | |||
notification · current Authentication Failure Trap is sent each time a user authentication is refused. | ||||
| NswitchMgtTrapsObj | 1.3.6.1.4.1.6486.800.1.3.2.11.2 | |||
| SsessionAuthFailure | 1.3.6.1.4.1.6486.800.1.3.2.11.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The reason why the user authentication failed.
| ||||
Traps / Notifications
- sessionAuthenticationTrap
1.3.6.1.4.1.6486.800.1.3.2.11.1.0.1