ALCATEL-IND1-QOS-MIB
Alcatel-Lucent EnterpriseQOS and filtering MIB
snmptranslate -m ALCATEL-IND1-QOS-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-QOS-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.22.1Imports
| ALCATEL-IND1-BASE | softentIND1QoS |
|---|---|
| IF-MIB | InterfaceIndex |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalaQoSMIB | 1.3.6.1.4.1.6486.800.1.2.1.22.1 | |||
identity QOS and filtering MIB | ||||
| NalaQoSMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1 | |||
node · current Branch for QoS Managed Objects. | ||||
| TalaQoSRuleTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1 | NA | ||
table · not-accessible · current Table of QoS Rule definitions | ||||
| RalaQoSRuleEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1 | NA | ||
| CalaQoSRuleName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of rule | ||||
| CalaQoSRuleEnabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Is this rule enabled or not
| ||||
| CalaQoSRuleSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the rule.
| ||||
| CalaQoSRulePrecedence | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.4 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received. | ||||
| CalaQoSRuleCondition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.5 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of the condition to use | ||||
| CalaQoSRuleAction | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.6 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of the action to use | ||||
| CalaQoSRuleReflexive | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
| ||||
| CalaQoSRuleSave | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Indicator to tell whether to write out the rule during snapshot commands.
| ||||
| CalaQoSRuleLog | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Indicator to tell whether to log matches to this rule in the QoS log.
| ||||
| CalaQoSRuleMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times this rule has been matched. | ||||
| CalaQoSRuleEnforced | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Is this rule currenly being enforced on the switch.
| ||||
| CalaQoSRuleActive | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Is this rule enforcable by the switch.
| ||||
| CalaQoSRuleRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete rules according to the RowStatus convention | ||||
| CalaQoSRuleValidityPeriod | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.14 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of the validity period to use | ||||
| CalaQoSRuleValidityPeriodStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether there is a validity period associated with this rule
| ||||
| CalaQoSRuleLogInterval | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.16 | Integer32 (0..3600) | RC | |
column · Integer32 (0..3600) · read-create · current How often to look for packets matching this rule when logging. When 0 log as many as possible. | ||||
| CalaQoSRuleCountType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current Which rule statistics counters to update if not all are available
| ||||
| CalaQoSRulePacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSRuleByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes matching this rule | ||||
| CalaQoSRuleExcessPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets out of bandwidth parameters | ||||
| CalaQoSRuleExcessByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes out of bandwidth parameters | ||||
| CalaQoSRuleType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast | ||||
| CalaQoSRuleTrapEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
| ||||
| CalaQoSRuleDefaultList | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current This rule belongs to the default policy list.
| ||||
| CalaQoSRuleGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being green compliant. | ||||
| CalaQoSRuleYellowCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being yellow compliant. | ||||
| CalaQoSRuleRedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being red compliant. | ||||
| CalaQoSRuleNonGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being non-green compliant. | ||||
| CalaQoSRuleNonRedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.29 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being non-red compliant. | ||||
| CalaQoSRuleAccounting | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current Flag for enabling/disbling the accounting mode.
| ||||
| CalaQoSRulePacketRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current Shows the packet per second rate | ||||
| CalaQoSRuleAccPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.32 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSRuleAccByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.33 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSRuleBitRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.34 | Counter64 | RO | |
column · Counter64 · read-only · current Shows the Bits per second rate | ||||
| TalaQoSAppliedRuleTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2 | NA | ||
table · not-accessible · current Table of QoS AppliedRule definitions | ||||
| RalaQoSAppliedRuleEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1 | NA | ||
| CalaQoSAppliedRuleName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of rule | ||||
| CalaQoSAppliedRuleEnabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Is this rule enabled or not
| ||||
| CalaQoSAppliedRuleSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the rule.
| ||||
| CalaQoSAppliedRulePrecedence | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.4 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received. | ||||
| CalaQoSAppliedRuleCondition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.5 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of the condition to use | ||||
| CalaQoSAppliedRuleAction | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.6 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of the action to use | ||||
| CalaQoSAppliedRuleReflexive | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
| ||||
| CalaQoSAppliedRuleSave | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Indicator to tell whether to write out the rule during snapshot commands.
| ||||
| CalaQoSAppliedRuleLog | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Indicator to tell whether to log matches to this rule in the QoS log.
| ||||
| CalaQoSAppliedRuleMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times this rule has been matched. | ||||
| CalaQoSAppliedRuleEnforced | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Is this rule currenly being enforced on the switch.
| ||||
| CalaQoSAppliedRuleActive | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Is this rule enforcable by the switch.
| ||||
| CalaQoSAppliedRuleRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.13 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete rules according to the RowStatus convention | ||||
| CalaQoSAppliedRuleValidityPeriod | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.14 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of the validity period to use | ||||
| CalaQoSAppliedRuleValidityPeriodStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether there is a validity period associated with this rule
| ||||
| CalaQoSAppliedRuleLogInterval | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.16 | Integer32 (0..3600) | RO | |
column · Integer32 (0..3600) · read-only · current How often to look for packets matching this rule when logging. When 0 log as many as possible. | ||||
| CalaQoSAppliedRuleCountType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Which rule statistics counters to update if not all are available
| ||||
| CalaQoSAppliedRulePacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSAppliedRuleByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes matching this rule | ||||
| CalaQoSAppliedRuleExcessPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets out of bandwidth parameters | ||||
| CalaQoSAppliedRuleExcessByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes out of bandwidth parameters | ||||
| CalaQoSAppliedRuleType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast | ||||
| CalaQoSAppliedRuleTrapEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
| ||||
| CalaQoSAppliedRuleDefaultList | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current This rule belongs to the default policy list.
| ||||
| CalaQoSAppliedRuleGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being green compliant. | ||||
| CalaQoSAppliedRuleYellowCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being yellow compliant. | ||||
| CalaQoSAppliedRuleRedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being red compliant. | ||||
| CalaQoSAppliedRuleNonGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being non-green compliant. | ||||
| CalaQoSAppliedRuleNonRedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.29 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets being non-red compliant. | ||||
| CalaQoSAppliedRuleAccounting | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current Flag for enabling/disabling the accounting mode.
| ||||
| CalaQoSAppliedRulePacketRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current Shows the packet per second rate | ||||
| CalaQoSAppliedRuleAccPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.32 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSAppliedRuleAccByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.33 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSAppliedRuleBitRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.34 | Counter64 | RO | |
column · Counter64 · read-only · current Shows the Bits per second rate | ||||
| TalaQoSConditionTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3 | NA | ||
table · not-accessible · current Table of QoS Condition definitions | ||||
| RalaQoSConditionEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1 | NA | ||
| CalaQoSConditionName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of condition | ||||
| CalaQoSConditionSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the condition.
| ||||
| CalaQoSConditionSourceSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.3 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Source physical slot used for traffic classification When 0, the port identifies an aggregate | ||||
| CalaQoSConditionSourceSlotStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourcePort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.5 | Integer32 (1..52) | RC | |
column · Integer32 (1..52) · read-create · current Source physical port range start to use for traffic classification | ||||
| CalaQoSConditionSourcePortGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.6 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Source physical port group to use for traffic classification | ||||
| CalaQoSConditionSourcePortGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.8 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Destination physical slot used for traffic classification When 0, the port identifies an aggregate | ||||
| CalaQoSConditionDestinationSlotStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.10 | Integer32 (1..52) | RC | |
column · Integer32 (1..52) · read-create · current Destination physical port range start to use for traffic classification | ||||
| CalaQoSConditionDestinationPortGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.11 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Destination physical port group to use for traffic classification | ||||
| CalaQoSConditionDestinationPortGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceInterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Source physical interface type to use for traffic classification
| ||||
| CalaQoSConditionSourceInterfaceTypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationInterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Destination physical interface type to use for traffic classification
| ||||
| CalaQoSConditionDestinationInterfaceTypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceMacAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.17 | MacAddress | RC | |
column · MacAddress · read-create · current Source MAC address to use for traffic classification | ||||
| CalaQoSConditionSourceMacAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceMacMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.19 | MacAddress | RC | |
column · MacAddress · read-create · current Source MAC mask to use for traffic classification | ||||
| CalaQoSConditionSourceMacGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.20 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Source MAC group to use for traffic classification | ||||
| CalaQoSConditionSourceMacGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.21 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationMacAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.22 | MacAddress | RC | |
column · MacAddress · read-create · current Destination MAC address to use for traffic classification | ||||
| CalaQoSConditionDestinationMacAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationMacMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.24 | MacAddress | RC | |
column · MacAddress · read-create · current Destination MAC mask to use for traffic classification | ||||
| CalaQoSConditionDestinationMacGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.25 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Destination MAC group to use for traffic classification | ||||
| CalaQoSConditionDestinationMacGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.26 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.27 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Source VLAN to use for traffic classification | ||||
| CalaQoSConditionSourceVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.28 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.29 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Destination VLAN to use for traffic classification | ||||
| CalaQoSConditionDestinationVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.30 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSCondition8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.31 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current 802.1p value to use for traffic classification | ||||
| CalaQoSCondition8021pStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.32 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.33 | IpAddress | RC | |
column · IpAddress · read-create · current Source IP address to use for traffic classification | ||||
| CalaQoSConditionSourceIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.34 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.35 | IpAddress | RC | |
column · IpAddress · read-create · current Source IP mask to use for traffic classification | ||||
| CalaQoSConditionSourceNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.36 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Source network group to use for traffic classification | ||||
| CalaQoSConditionSourceNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.37 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.38 | IpAddress | RC | |
column · IpAddress · read-create · current Destination IP address to use for traffic classification | ||||
| CalaQoSConditionDestinationIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.39 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.40 | IpAddress | RC | |
column · IpAddress · read-create · current Destination IP mask to use for traffic classification | ||||
| CalaQoSConditionDestinationNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.41 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Destination network group to use for traffic classification | ||||
| CalaQoSConditionDestinationNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.42 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionMulticastIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.43 | IpAddress | RC | |
column · IpAddress · read-create · current Multicast IP address to use for traffic classification | ||||
| CalaQoSConditionMulticastIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.44 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionMulticastIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.45 | IpAddress | RC | |
column · IpAddress · read-create · current Multicast IP mask to use for traffic classification | ||||
| CalaQoSConditionMulticastNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.46 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Multicast network group to use for traffic classification | ||||
| CalaQoSConditionMulticastNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.47 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionTos | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.48 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current TOS value to use for traffic classification | ||||
| CalaQoSConditionTosStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.49 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionTosMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.50 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current TOS mask to use for traffic classification | ||||
| CalaQoSConditionDscp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.51 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current DSCP value to use for traffic classification | ||||
| CalaQoSConditionDscpStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.52 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDscpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.53 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current DSCP mask to use for traffic classification | ||||
| CalaQoSConditionIpProtocol | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.54 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current IP protocol to use for traffic classification. | ||||
| CalaQoSConditionIpProtocolStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.55 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.56 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source IP port range start to use for traffic classification. | ||||
| CalaQoSConditionSourceIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.57 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.58 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination IP port range start to use for traffic classification. | ||||
| CalaQoSConditionDestinationIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.59 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionService | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.60 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of service to use for traffic classification | ||||
| CalaQoSConditionServiceStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.61 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the service needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionServiceGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.62 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of service group to use for traffic classification | ||||
| CalaQoSConditionServiceGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.63 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionIcmpType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.64 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current ICMP type to use for traffic classification | ||||
| CalaQoSConditionIcmpTypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.65 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionIcmpCode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.66 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current ICMP code to use for traffic classification | ||||
| CalaQoSConditionIcmpCodeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.67 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDlci | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.68 | Integer32 (0..512) | RC | |
column · Integer32 (0..512) · read-create · current DLCI to use to traffic classification | ||||
| CalaQoSConditionDlciStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.69 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.70 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete conditions according to the RowStatus convention | ||||
| CalaQoSConditionSourcePortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.71 | Integer32 (1..52) | RC | |
column · Integer32 (1..52) · read-create · current Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port. | ||||
| CalaQoSConditionDestinationPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.72 | Integer32 (1..52) | RC | |
column · Integer32 (1..52) · read-create · current Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port. | ||||
| CalaQoSConditionSourceIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.73 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. | ||||
| CalaQoSConditionDestinationIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.74 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. | ||||
| CalaQoSConditionSourceTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.75 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source TCP port range start to use for traffic classification. | ||||
| CalaQoSConditionSourceTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.76 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.77 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. | ||||
| CalaQoSConditionDestinationTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.78 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination TCP port range start to use for traffic classification. | ||||
| CalaQoSConditionDestinationTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.79 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.80 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. | ||||
| CalaQoSConditionSourceUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.81 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source UDP port range start to use for traffic classification. | ||||
| CalaQoSConditionSourceUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.82 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.83 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. | ||||
| CalaQoSConditionDestinationUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.84 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination UDP port range start to use for traffic classification. | ||||
| CalaQoSConditionDestinationUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.85 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.86 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port. | ||||
| CalaQoSConditionEthertype | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.87 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Ethertype value to use for traffic classification | ||||
| CalaQoSConditionEthertypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.88 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionTcpFlags | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.89 | INTEGER | RC | |
column · INTEGER · read-create · current Use any/all specifieid TCP flags for traffic classification
| ||||
| CalaQoSConditionTcpFlagsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.90 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionTcpFlagsVal | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.91 | Integer32 | RC | |
column · Integer32 · read-create · current TCP flags values used for traffic classification | ||||
| CalaQoSConditionTcpFlagsValStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.92 | INTEGER | RC | |
column · INTEGER · read-create · current Not used
| ||||
| CalaQoSConditionTcpFlagsMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.93 | Integer32 | RC | |
column · Integer32 · read-create · current Mask of TCP flags bits used for traffic classification | ||||
| CalaQoSConditionTcpFlagsMaskStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.94 | INTEGER | RC | |
column · INTEGER · read-create · current Not used
| ||||
| CalaQoSConditionTcpEstablished | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.95 | INTEGER | RC | |
column · INTEGER · read-create · current Look for established TCP sessions in classification
| ||||
| CalaQoSConditionSourceIpv6Addr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.96 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Source IPv6 address to use for traffic classification | ||||
| CalaQoSConditionSourceIpv6AddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.97 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionSourceIpv6Mask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.98 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Source IPv6 mask to use for traffic classification | ||||
| CalaQoSConditionDestinationIpv6Addr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.99 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Destination IPv6 address to use for traffic classification | ||||
| CalaQoSConditionDestinationIpv6AddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.100 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionDestinationIpv6Mask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.101 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Destination IPv6 mask to use for traffic classification | ||||
| CalaQoSConditionIpv6Traffic | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.102 | INTEGER | RC | |
column · INTEGER · read-create · current classify IPV6 traffic
| ||||
| CalaQoSConditionIpv6NH | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.103 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current NH value to use for traffic classification | ||||
| CalaQoSConditionIpv6NHStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.104 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionIpv6FlowLabel | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.105 | Integer32 (0..1048575) | RC | |
column · Integer32 (0..1048575) · read-create · current FL value to use for traffic classification | ||||
| CalaQoSConditionIpv6FlowLabelStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.106 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionMcastIpv6Addr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.107 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Multicast IPv6 address to use for traffic classification | ||||
| CalaQoSConditionMcastIpv6AddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.108 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionMcastIpv6Mask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.109 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Multicast IPv6 mask to use for traffic classification | ||||
| CalaQoSConditionDscpEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.110 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current DSCP value to use for traffic classification | ||||
| CalaQoSConditionInnerSourceVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.111 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Customer VLAN to use for traffic classification | ||||
| CalaQoSConditionInnerSourceVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.112 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionInner8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.113 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Customer 802.1p to use for traffic classification | ||||
| CalaQoSConditionInner8021pStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.114 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSConditionVrfName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.115 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of Vrf to match traffic in | ||||
| CalaQoSConditionVrfNameStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.116 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSCondition8021pEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.117 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current 802.1p range end value to use for traffic classification. | ||||
| CalaQoSConditionInner8021pEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.118 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Inner 802.1p range end value to use for traffic classification. | ||||
| CalaQoSConditionSourceVlanGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.119 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Source vlan group to use for traffic classification | ||||
| CalaQoSConditionSourceVlanGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.120 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
| ||||
| CalaQoSConditionInnerSourceVlanGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.121 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Inner Source vlan group to use for traffic classification | ||||
| CalaQoSConditionInnerSourceVlanGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.122 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for inner
source vlan group.
| ||||
| CalaQoSConditionSIP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.123 | INTEGER | RC | |
column · INTEGER · read-create · current SIP type to use for traffic classification
| ||||
| CalaQoSConditionSIPStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.124 | INTEGER | RC | |
column · INTEGER · read-create · current SIP Status field indicates whether SIP is enabled or disabled for traffic classification
| ||||
| TalaQoSAppliedConditionTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4 | NA | ||
table · not-accessible · current Table of QoS AppliedCondition definitions | ||||
| RalaQoSAppliedConditionEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1 | NA | ||
| CalaQoSAppliedConditionName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of condition | ||||
| CalaQoSAppliedConditionSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the condition.
| ||||
| CalaQoSAppliedConditionSourceSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.3 | Integer32 (0..16) | RO | |
column · Integer32 (0..16) · read-only · current Source physical slot used for traffic classification When 0, the port identifies an aggregate | ||||
| CalaQoSAppliedConditionSourceSlotStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourcePort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.5 | Integer32 (1..52) | RO | |
column · Integer32 (1..52) · read-only · current Source physical port range start to use for traffic classification | ||||
| CalaQoSAppliedConditionSourcePortGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.6 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Source physical port group to use for traffic classification | ||||
| CalaQoSAppliedConditionSourcePortGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.8 | Integer32 (0..16) | RO | |
column · Integer32 (0..16) · read-only · current Destination physical slot used for traffic classification When 0, the port identifies an aggregate | ||||
| CalaQoSAppliedConditionDestinationSlotStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.10 | Integer32 (1..52) | RO | |
column · Integer32 (1..52) · read-only · current Destination physical port range start to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationPortGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.11 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Destination physical port group to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationPortGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceInterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Source physical interface type to use for traffic classification
| ||||
| CalaQoSAppliedConditionSourceInterfaceTypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationInterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Destination physical interface type to use for traffic classification
| ||||
| CalaQoSAppliedConditionDestinationInterfaceTypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceMacAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.17 | MacAddress | RO | |
column · MacAddress · read-only · current Source MAC address to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceMacAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceMacMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.19 | MacAddress | RO | |
column · MacAddress · read-only · current Source MAC mask to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceMacGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.20 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Source MAC group to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceMacGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationMacAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.22 | MacAddress | RO | |
column · MacAddress · read-only · current Destination MAC address to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationMacAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationMacMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.24 | MacAddress | RO | |
column · MacAddress · read-only · current Destination MAC mask to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationMacGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.25 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Destination MAC group to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationMacGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.27 | Integer32 (0..4095) | RO | |
column · Integer32 (0..4095) · read-only · current Source VLAN to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.29 | Integer32 (0..4095) | RO | |
column · Integer32 (0..4095) · read-only · current Destination VLAN to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedCondition8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.31 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current 802.1p value to use for traffic classification | ||||
| CalaQoSAppliedCondition8021pStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.33 | IpAddress | RO | |
column · IpAddress · read-only · current Source IP address to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.35 | IpAddress | RO | |
column · IpAddress · read-only · current Source IP mask to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.36 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Source network group to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.37 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.38 | IpAddress | RO | |
column · IpAddress · read-only · current Destination IP address to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.39 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.40 | IpAddress | RO | |
column · IpAddress · read-only · current Destination IP mask to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.41 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Destination network group to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.42 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionMulticastIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.43 | IpAddress | RO | |
column · IpAddress · read-only · current Multicast IP address to use for traffic classification | ||||
| CalaQoSAppliedConditionMulticastIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.44 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionMulticastIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.45 | IpAddress | RO | |
column · IpAddress · read-only · current Multicast IP mask to use for traffic classification | ||||
| CalaQoSAppliedConditionMulticastNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.46 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Multicast network group to use for traffic classification | ||||
| CalaQoSAppliedConditionMulticastNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.47 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionTos | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.48 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current TOS value to use for traffic classification | ||||
| CalaQoSAppliedConditionTosStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.49 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionTosMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.50 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current TOS mask to use for traffic classification | ||||
| CalaQoSAppliedConditionDscp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.51 | Integer32 (0..63) | RO | |
column · Integer32 (0..63) · read-only · current DSCP value to use for traffic classification | ||||
| CalaQoSAppliedConditionDscpStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.52 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDscpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.53 | Integer32 (0..63) | RO | |
column · Integer32 (0..63) · read-only · current DSCP mask to use for traffic classification | ||||
| CalaQoSAppliedConditionIpProtocol | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.54 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current IP protocol to use for traffic classification. | ||||
| CalaQoSAppliedConditionIpProtocolStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.55 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.56 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source IP port range start to use for traffic classification. | ||||
| CalaQoSAppliedConditionSourceIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.57 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.58 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination IP port range start to use for traffic classification. | ||||
| CalaQoSAppliedConditionDestinationIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.59 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionService | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.60 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of service to use for traffic classification | ||||
| CalaQoSAppliedConditionServiceStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.61 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the service needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionServiceGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.62 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of service group to use for traffic classification | ||||
| CalaQoSAppliedConditionServiceGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.63 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionIcmpType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.64 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current ICMP type to use for traffic classification | ||||
| CalaQoSAppliedConditionIcmpTypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.65 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionIcmpCode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.66 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current ICMP code to use for traffic classification | ||||
| CalaQoSAppliedConditionIcmpCodeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.67 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDlci | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.68 | Integer32 (0..512) | RO | |
column · Integer32 (0..512) · read-only · current DLCI to use to traffic classification | ||||
| CalaQoSAppliedConditionDlciStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.69 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.70 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete conditions according to the RowStatus convention | ||||
| CalaQoSAppliedConditionSourcePortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.71 | Integer32 (1..52) | RO | |
column · Integer32 (1..52) · read-only · current Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port. | ||||
| CalaQoSAppliedConditionDestinationPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.72 | Integer32 (1..52) | RO | |
column · Integer32 (1..52) · read-only · current Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port. | ||||
| CalaQoSAppliedConditionSourceIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. | ||||
| CalaQoSAppliedConditionDestinationIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.74 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. | ||||
| CalaQoSAppliedConditionSourceTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.75 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source TCP port range start to use for traffic classification. | ||||
| CalaQoSAppliedConditionSourceTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.76 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.77 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. | ||||
| CalaQoSAppliedConditionDestinationTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.78 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination TCP port range start to use for traffic classification. | ||||
| CalaQoSAppliedConditionDestinationTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.79 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.80 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. | ||||
| CalaQoSAppliedConditionSourceUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.81 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source UDP port range start to use for traffic classification. | ||||
| CalaQoSAppliedConditionSourceUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.82 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.83 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. | ||||
| CalaQoSAppliedConditionDestinationUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.84 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination UDP port range start to use for traffic classification. | ||||
| CalaQoSAppliedConditionDestinationUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.85 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.86 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port. | ||||
| CalaQoSAppliedConditionEthertype | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.87 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Ethertype value to use for traffic classification | ||||
| CalaQoSAppliedConditionEthertypeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.88 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionTcpFlags | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.89 | INTEGER | RO | |
column · INTEGER · read-only · current Use any/all specifieid TCP flags for traffic classification
| ||||
| CalaQoSAppliedConditionTcpFlagsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.90 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionTcpFlagsVal | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.91 | Integer32 | RO | |
column · Integer32 · read-only · current TCP flags values used for traffic classification | ||||
| CalaQoSAppliedConditionTcpFlagsValStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.92 | INTEGER | RO | |
column · INTEGER · read-only · current Not used
| ||||
| CalaQoSAppliedConditionTcpFlagsMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.93 | Integer32 | RO | |
column · Integer32 · read-only · current Mask of TCP flags bits used for traffic classification | ||||
| CalaQoSAppliedConditionTcpFlagsMaskStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.94 | INTEGER | RO | |
column · INTEGER · read-only · current Not used
| ||||
| CalaQoSAppliedConditionTcpEstablished | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.95 | INTEGER | RO | |
column · INTEGER · read-only · current Look for established TCP sessions in classification
| ||||
| CalaQoSAppliedConditionSourceIpv6Addr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.96 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current Source IPv6 address to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceIpv6AddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.97 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionSourceIpv6Mask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.98 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current Source IPv6 mask to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationIpv6Addr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.99 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current Destination IPv6 address to use for traffic classification | ||||
| CalaQoSAppliedConditionDestinationIpv6AddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.100 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionDestinationIpv6Mask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.101 | Ipv6Address | RO | |
column · Ipv6Address · read-only · current Destination IPv6 mask to use for traffic classification | ||||
| CalaQoSAppliedConditionIpv6Traffic | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.102 | INTEGER | RO | |
column · INTEGER · read-only · current classify IPV6 traffic
| ||||
| CalaQoSAppliedConditionIpv6NH | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.103 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current NH value to use for traffic classification | ||||
| CalaQoSAppliedConditionIpv6NHStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.104 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionIpv6FlowLabel | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.105 | Integer32 (0..1048575) | RO | |
column · Integer32 (0..1048575) · read-only · current FL value to use for traffic classification | ||||
| CalaQoSAppliedConditionIpv6FlowLabelStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.106 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionMcastIpv6Addr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.107 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Multicast IPv6 address to use for traffic classification | ||||
| CalaQoSAppliedConditionMcastIpv6AddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.108 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionMcastIpv6Mask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.109 | Ipv6Address | RC | |
column · Ipv6Address · read-create · current Multicast IPv6 mask to use for traffic classification | ||||
| CalaQoSAppliedConditionDscpEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.110 | Integer32 (0..63) | RO | |
column · Integer32 (0..63) · read-only · current DSCP value to use for traffic classification | ||||
| CalaQoSAppliedConditionInnerSourceVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.111 | Integer32 (0..4095) | RO | |
column · Integer32 (0..4095) · read-only · current Customer VLAN to use for traffic classification | ||||
| CalaQoSAppliedConditionInnerSourceVlanStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.112 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionInner8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.113 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current Customer 802.1p to use for traffic classification | ||||
| CalaQoSAppliedConditionInner8021pStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.114 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedConditionVrfName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.115 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of Vrf to match traffic in | ||||
| CalaQoSAppliedConditionVrfNameStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.116 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedCondition8021pEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.117 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current 802.1p range end value to use for traffic classification. | ||||
| CalaQoSAppliedConditionInner8021pEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.118 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Inner 802.1p range end value to use for traffic classification. | ||||
| CalaQoSAppliedConditionSourceVlanGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.119 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Source vlan group to use for traffic classification | ||||
| CalaQoSAppliedConditionSourceVlanGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.120 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
| ||||
| CalaQoSAppliedConditionInnerSourceVlanGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.121 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Inner Source vlan group to use for traffic classification | ||||
| CalaQoSAppliedConditionInnerSourceVlanGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.122 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group.
| ||||
| CalaQoSAppliedConditionSIP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.123 | INTEGER | RC | |
column · INTEGER · read-create · current SIP type to use for traffic classification
| ||||
| CalaQoSAppliedConditionSIPStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.124 | INTEGER | RC | |
column · INTEGER · read-create · current SIP Status field indicates whether SIP is enabled or disabled for traffic classification
| ||||
| TalaQoSServiceTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5 | NA | ||
table · not-accessible · current Table of QoS Service definitions | ||||
| RalaQoSServiceEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1 | NA | ||
| CalaQoSServiceName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of the service | ||||
| CalaQoSServiceSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the service.
| ||||
| CalaQoSServiceProtocol | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.3 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current protocol field for Service | ||||
| CalaQoSServiceSourceIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.4 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source IP port range start to use for traffic classification. | ||||
| CalaQoSServiceSourceIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSServiceDestinationIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.6 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination IP port range start to use for traffic classification. | ||||
| CalaQoSServiceDestinationIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSServiceRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete services according to the RowStatus convention | ||||
| CalaQoSServiceSourceIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.9 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. | ||||
| CalaQoSServiceDestinationIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.10 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. | ||||
| CalaQoSServiceSourceTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.11 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source TCP port range start to use for traffic classification. | ||||
| CalaQoSServiceSourceTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSServiceSourceTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. | ||||
| CalaQoSServiceDestinationTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.14 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination TCP port range start to use for traffic classification. | ||||
| CalaQoSServiceDestinationTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSServiceDestinationTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.16 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. | ||||
| CalaQoSServiceSourceUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.17 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source UDP port range start to use for traffic classification. | ||||
| CalaQoSServiceSourceUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSServiceSourceUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.19 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. | ||||
| CalaQoSServiceDestinationUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.20 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination UDP port range start to use for traffic classification. | ||||
| CalaQoSServiceDestinationUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.21 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSServiceDestinationUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.22 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port. | ||||
| TalaQoSAppliedServiceTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6 | NA | ||
table · not-accessible · current Table of QoS AppliedService definitions | ||||
| RalaQoSAppliedServiceEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1 | NA | ||
| CalaQoSAppliedServiceName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of the service | ||||
| CalaQoSAppliedServiceSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the service.
| ||||
| CalaQoSAppliedServiceProtocol | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current protocol field for AppliedService | ||||
| CalaQoSAppliedServiceSourceIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.4 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source IP port range start to use for traffic classification. | ||||
| CalaQoSAppliedServiceSourceIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedServiceDestinationIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.6 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination IP port range start to use for traffic classification. | ||||
| CalaQoSAppliedServiceDestinationIpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedServiceRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.8 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete services according to the RowStatus convention | ||||
| CalaQoSAppliedServiceSourceIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. | ||||
| CalaQoSAppliedServiceDestinationIpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.10 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. | ||||
| CalaQoSAppliedServiceSourceTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.11 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source TCP port range start to use for traffic classification. | ||||
| CalaQoSAppliedServiceSourceTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedServiceSourceTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.13 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. | ||||
| CalaQoSAppliedServiceDestinationTcpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.14 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination TCP port range start to use for traffic classification. | ||||
| CalaQoSAppliedServiceDestinationTcpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedServiceDestinationTcpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.16 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. | ||||
| CalaQoSAppliedServiceSourceUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.17 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source UDP port range start to use for traffic classification. | ||||
| CalaQoSAppliedServiceSourceUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedServiceSourceUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.19 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. | ||||
| CalaQoSAppliedServiceDestinationUdpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.20 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination UDP port range start to use for traffic classification. | ||||
| CalaQoSAppliedServiceDestinationUdpPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
| ||||
| CalaQoSAppliedServiceDestinationUdpPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.22 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port. | ||||
| TalaQoSServiceGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7 | NA | ||
table · not-accessible · current Table of QoS ServiceGroups definitions | ||||
| RalaQoSServiceGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1 | NA | ||
| CalaQoSServiceGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of service group | ||||
| CalaQoSServiceGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the service group.
| ||||
| CalaQoSServiceGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete service groups according to the RowStatus convention | ||||
| TalaQoSAppliedServiceGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8 | NA | ||
table · not-accessible · current Table of QoS AppliedServiceGroups definitions | ||||
| RalaQoSAppliedServiceGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedServiceGroups | ||||
| CalaQoSAppliedServiceGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of service group | ||||
| CalaQoSAppliedServiceGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the service group.
| ||||
| CalaQoSAppliedServiceGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete service groups according to the RowStatus convention | ||||
| TalaQoSServiceGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9 | NA | ||
table · not-accessible · current Table of QoS ServiceGroup definitions | ||||
| RalaQoSServiceGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1 | NA | ||
row · not-accessible · current Definition of QoS ServiceGroup | ||||
| CalaQoSServiceGroupServiceName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of service in service group entry | ||||
| CalaQoSServiceGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete service group entries according to the RowStatus convention | ||||
| TalaQoSAppliedServiceGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10 | NA | ||
table · not-accessible · current Table of QoS AppliedServiceGroup definitions | ||||
| RalaQoSAppliedServiceGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedServiceGroup | ||||
| CalaQoSAppliedServiceGroupServiceName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of service in service group entry | ||||
| CalaQoSAppliedServiceGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.2 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete service group entries according to the RowStatus convention | ||||
| TalaQoSNetworkGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11 | NA | ||
table · not-accessible · current Table of QoS NetworkGroups definitions | ||||
| RalaQoSNetworkGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1 | NA | ||
| CalaQoSNetworkGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of network group | ||||
| CalaQoSNetworkGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the network group.
| ||||
| CalaQoSNetworkGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete network groups according to the RowStatus convention | ||||
| TalaQoSAppliedNetworkGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12 | NA | ||
table · not-accessible · current Table of QoS AppliedNetworkGroups definitions | ||||
| RalaQoSAppliedNetworkGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedNetworkGroups | ||||
| CalaQoSAppliedNetworkGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of network group | ||||
| CalaQoSAppliedNetworkGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the network group.
| ||||
| CalaQoSAppliedNetworkGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete network groups according to the RowStatus convention | ||||
| TalaQoSNetworkGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13 | NA | ||
table · not-accessible · current Table of QoS NetworkGroup definitions | ||||
| RalaQoSNetworkGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1 | NA | ||
row · not-accessible · current Definition of QoS NetworkGroup | ||||
| CalaQoSNetworkGroupIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current IP address for network group entry. | ||||
| CalaQoSNetworkGroupIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current IP mask for network group entry. | ||||
| CalaQoSNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete network group entries according to the RowStatus convention | ||||
| TalaQoSAppliedNetworkGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14 | NA | ||
table · not-accessible · current Table of QoS AppliedNetworkGroup definitions | ||||
| RalaQoSAppliedNetworkGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedNetworkGroup | ||||
| CalaQoSAppliedNetworkGroupIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current IP address for network group entry. | ||||
| CalaQoSAppliedNetworkGroupIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current IP mask for network group entry. | ||||
| CalaQoSAppliedNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete network group entries according to the RowStatus convention | ||||
| TalaQoSMACGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15 | NA | ||
table · not-accessible · current Table of QoS MACGroups definitions | ||||
| RalaQoSMACGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1 | NA | ||
| CalaQoSMACGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of MAC group | ||||
| CalaQoSMACGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the MAC group.
| ||||
| CalaQoSMACGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete MAC groups according to the RowStatus convention | ||||
| TalaQoSAppliedMACGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16 | NA | ||
table · not-accessible · current Table of QoS AppliedMACGroups definitions | ||||
| RalaQoSAppliedMACGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1 | NA | ||
| CalaQoSAppliedMACGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of MAC group | ||||
| CalaQoSAppliedMACGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the MAC group.
| ||||
| CalaQoSAppliedMACGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete MAC groups according to the RowStatus convention | ||||
| TalaQoSMACGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17 | NA | ||
table · not-accessible · current Table of QoS MACGroup definitions | ||||
| RalaQoSMACGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1 | NA | ||
row · not-accessible · current Definition of QoS MACGroup | ||||
| CalaQoSMACGroupMacAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address for MAC group entry | ||||
| CalaQoSMACGroupMacMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC mask for MAC group entry | ||||
| CalaQoSMACGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete MAC group entries according to the RowStatus convention | ||||
| TalaQoSAppliedMACGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18 | NA | ||
table · not-accessible · current Table of QoS AppliedMACGroup definitions | ||||
| RalaQoSAppliedMACGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedMACGroup | ||||
| CalaQoSAppliedMACGroupMacAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC address for MAC group entry | ||||
| CalaQoSAppliedMACGroupMacMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current MAC mask for MAC group entry | ||||
| CalaQoSAppliedMACGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete MAC group entries according to the RowStatus convention | ||||
| TalaQoSPortGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19 | NA | ||
table · not-accessible · current Table of QoS PortGroups definitions | ||||
| RalaQoSPortGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1 | NA | ||
| CalaQoSPortGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of port group | ||||
| CalaQoSPortGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the port group.
| ||||
| CalaQoSPortGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete port groups according to the RowStatus convention | ||||
| CalaQoSPortGroupsMode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Mode for policy action on the per port basis or group basis.
| ||||
| TalaQoSAppliedPortGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20 | NA | ||
table · not-accessible · current Table of QoS AppliedPortGroups definitions | ||||
| RalaQoSAppliedPortGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1 | NA | ||
| CalaQoSAppliedPortGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of port group | ||||
| CalaQoSAppliedPortGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the port group.
| ||||
| CalaQoSAppliedPortGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete port groups according to the RowStatus convention | ||||
| CalaQoSAppliedPortGroupsMode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Mode for policy action on the per port basis or group basis.
| ||||
| TalaQoSPortGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21 | NA | ||
table · not-accessible · current Table of QoS PortGroup definitions | ||||
| RalaQoSPortGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1 | NA | ||
row · not-accessible · current Definition of QoS PortGroup | ||||
| CalaQoSPortGroupSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Physical slot for port group entry | ||||
| CalaQoSPortGroupPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.2 | Integer32 (1..52) | NA | |
column · Integer32 (1..52) · not-accessible · current Physical port range start for port group entry | ||||
| CalaQoSPortGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete port group entries according to the RowStatus convention | ||||
| CalaQoSPortGroupPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.4 | Integer32 (0..52) | NA | |
column · Integer32 (0..52) · not-accessible · current Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port. | ||||
| TalaQoSAppliedPortGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22 | NA | ||
table · not-accessible · current Table of QoS AppliedPortGroup definitions | ||||
| RalaQoSAppliedPortGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedPortGroup | ||||
| CalaQoSAppliedPortGroupSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Physical slot for port group entry | ||||
| CalaQoSAppliedPortGroupPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.2 | Integer32 (1..52) | NA | |
column · Integer32 (1..52) · not-accessible · current Physical port range start for port group entry | ||||
| CalaQoSAppliedPortGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete port group entries according to the RowStatus convention | ||||
| CalaQoSAppliedPortGroupPortEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.4 | Integer32 (0..52) | NA | |
column · Integer32 (0..52) · not-accessible · current Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port. | ||||
| TalaQoSMapGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23 | NA | ||
table · not-accessible · current Table of QoS MapGroups definitions | ||||
| RalaQoSMapGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1 | NA | ||
| CalaQoSMapGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of map group | ||||
| CalaQoSMapGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the map group.
| ||||
| CalaQoSMapGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete map groups according to the RowStatus convention | ||||
| TalaQoSAppliedMapGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24 | NA | ||
table · not-accessible · current Table of QoS AppliedMapGroups definitions | ||||
| RalaQoSAppliedMapGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1 | NA | ||
| CalaQoSAppliedMapGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of map group | ||||
| CalaQoSAppliedMapGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the map group.
| ||||
| CalaQoSAppliedMapGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.3 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete map groups according to the RowStatus convention | ||||
| TalaQoSMapGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25 | NA | ||
table · not-accessible · current Table of QoS MapGroup definitions | ||||
| RalaQoSMapGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1 | NA | ||
row · not-accessible · current Definition of QoS MapGroup | ||||
| CalaQoSMapGroupKey | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.1 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Key range start of map group entry. | ||||
| CalaQoSMapGroupKeyEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.2 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key. | ||||
| CalaQoSMapGroupValue | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.3 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Value for map group entries. Value to stamp on traffic when keys in the proper range are seen. | ||||
| CalaQoSMapGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete map group entries according to the RowStatus convention | ||||
| TalaQoSAppliedMapGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26 | NA | ||
table · not-accessible · current Table of QoS AppliedMapGroup definitions | ||||
| RalaQoSAppliedMapGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedMapGroup | ||||
| CalaQoSAppliedMapGroupKey | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.1 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Key range start of map group entry. | ||||
| CalaQoSAppliedMapGroupKeyEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.2 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key. | ||||
| CalaQoSAppliedMapGroupValue | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.3 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Value for map group entries. Value to stamp on traffic when keys in the proper range are seen. | ||||
| CalaQoSAppliedMapGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.4 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete map group entries according to the RowStatus convention | ||||
| TalaQoSActionTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27 | NA | ||
table · not-accessible · current Table of QoS Action definitions | ||||
| RalaQoSActionEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1 | NA | ||
| CalaQoSActionName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of action | ||||
| CalaQoSActionSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the action.
| ||||
| CalaQoSActionDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Disposition of traffic using the action. Use to filter out unwanted traffic.
| ||||
| CalaQoSActionDropAlgorithm | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Which drop algorithm should be used to discard traffic when oversubscribed.
| ||||
| CalaQoSActionWredMaximumThreshold | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Bandwidth at which WRED should discard most traffic. | ||||
| CalaQoSActionWredMaximumThresholdStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionWredMinimumThreshold | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current Bandwidth at which WRED should start to discard traffic. | ||||
| CalaQoSActionWredMinimumThresholdStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionWredMaximumProbability | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current Probabilty that traffic will be dropped at WRED maximum threshold. | ||||
| CalaQoSActionWredMaximumProbabilityStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionMinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum bandwidth (Kbits/sec) to guarantee for traffic | ||||
| CalaQoSActionMinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionMaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum bandwidth (Kbits/sec) allowed for traffic | ||||
| CalaQoSActionMaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionPeakBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15 | Integer32 | RC | |
column · Integer32 · read-create · current Peak bandwidth (Kbits/sec) allowed for traffic | ||||
| CalaQoSActionPeakBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether peak bandwidth is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionPriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Internal and queueing priority to use for traffic. | ||||
| CalaQoSActionPriorityStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether priority is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionShared | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
| ||||
| CalaQoSActionJitter | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum jitter to allow for traffic. | ||||
| CalaQoSActionJitterStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether jitter is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionLatency | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum latency to allow for traffic. | ||||
| CalaQoSActionLatencyStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether latency is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionMaximumDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications. | ||||
| CalaQoSActionMaximumDepthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether maximum depth is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionMaximumBuffers | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26 | Integer32 (0..2047) | RC | |
column · Integer32 (0..2047) · read-create · current Maxmimum buffers for queues for traffic. | ||||
| CalaQoSActionMaximumBuffersStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether maximum buffers is specified(enabled) or not(disabled).
| ||||
| CalaQoSAction8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current 802.1p value to stamp on traffic. | ||||
| CalaQoSAction8021pStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether 802.1p is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionTos | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current TOS value to stamp on traffic. (High 3 bits of TOS byte) | ||||
| CalaQoSActionTosStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether TOS is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionDscp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current TOS value to stamp on traffic. (High 6 bits of TOS byte) | ||||
| CalaQoSActionDscpStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether DSCP is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionMapFrom | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34 | INTEGER | RC | |
column · INTEGER · read-create · current What field to use as key for mapping 802.1p/TOS/DSCP priorities
| ||||
| CalaQoSActionMapTo | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35 | INTEGER | RC | |
column · INTEGER · read-create · current What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
| ||||
| CalaQoSActionMapGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of the map group to use when remapping 802.1p/TOS/DSCP priorities. | ||||
| CalaQoSActionMapGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether a map group is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionSourceRewriteIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38 | IpAddress | RC | |
column · IpAddress · read-create · current Source IP address to rewrite on traffic. | ||||
| CalaQoSActionSourceRewriteIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionSourceRewriteIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40 | IpAddress | RC | |
column · IpAddress · read-create · current Source rewrite IP mask to determine how much of source IP to rewrite. | ||||
| CalaQoSActionSourceRewriteNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condition. | ||||
| CalaQoSActionSourceRewriteNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether source rewrite network group is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionDestinationRewriteIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43 | IpAddress | RC | |
column · IpAddress · read-create · current Destination IP address to rewrite on traffic. | ||||
| CalaQoSActionDestinationRewriteIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionDestinationRewriteIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45 | IpAddress | RC | |
column · IpAddress · read-create · current Destination rewrite IP mask to determine how much of destination IP to rewrite. | ||||
| CalaQoSActionDestinationRewriteNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition. | ||||
| CalaQoSActionDestinationRewriteNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionLoadBalanceGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48 | DisplayString (SIZE (0..23)) | RC | |
column · DisplayString (SIZE (0..23)) · read-create · current Name of load balance group to use for traffic | ||||
| CalaQoSActionLoadBalanceGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether load balanace group is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionPermanentGatewayIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50 | IpAddress | RC | |
column · IpAddress · read-create · current Next hop gateway to use for traffic | ||||
| CalaQoSActionPermanentGatewayIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionAlternateGatewayIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52 | IpAddress | RC | |
column · IpAddress · read-create · current Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes. | ||||
| CalaQoSActionAlternateGatewayIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete actions according to the RowStatus convention | ||||
| CalaQoSActionMinimumDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications. | ||||
| CalaQoSActionMinimumDepthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether minimum depth is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionVPNAccess | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57 | INTEGER | RC | |
column · INTEGER · read-create · current How to encrypt traffic
| ||||
| CalaQoSActionNocache | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58 | INTEGER | RC | |
column · INTEGER · read-create · current When enabled, don't make hardware entries for matching flows.
| ||||
| CalaQoSActionPortdisable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59 | INTEGER | RC | |
column · INTEGER · read-create · current When enabled, disable the physical source port of the traffic.
| ||||
| CalaQoSActionRedirectSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Destination physical slot for redirected traffic | ||||
| CalaQoSActionRedirectSlotStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61 | INTEGER | RC | |
column · INTEGER · read-create · current Status for alaQoSActionRedirectSlotStatus field
| ||||
| CalaQoSActionRedirectPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62 | Integer32 (1..52) | RC | |
column · Integer32 (1..52) · read-create · current Destination physical port for redirected traffic | ||||
| CalaQoSActionRedirectAgg | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63 | Integer32 (0..32) | RC | |
column · Integer32 (0..32) · read-create · current Destination linkagg for redirected traffic | ||||
| CalaQoSActionRedirectAggStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64 | INTEGER | RC | |
column · INTEGER · read-create · current Status for alaQoSActionRedirectAggStatus field
| ||||
| CalaQoSActionMirrorSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Destination physical slot for mirrored traffic | ||||
| CalaQoSActionMirrorPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66 | Integer32 (1..52) | RC | |
column · Integer32 (1..52) · read-create · current Destination physical port for mirrored traffic | ||||
| CalaQoSActionMirrorMode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67 | INTEGER | RC | |
column · INTEGER · read-create · current Mirroring mode
| ||||
| CalaQoSActionMirrorModeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68 | INTEGER | RC | |
column · INTEGER · read-create · current Status for alaQoSActionMirrorMode field
| ||||
| CalaQoSActionCIR | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.69 | Integer32 | RC | |
column · Integer32 · read-create · current Committed Information Rate - bandwidth values in kilobits per second.
| ||||
| CalaQoSActionCIRStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether CIR value is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionCBS | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71 | Integer32 (0..2147450880) | RC | |
column · Integer32 (0..2147450880) · read-create · current Committed Burst Size - bucket size in byte. | ||||
| CalaQoSActionCBSStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether CBS value is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionPIR | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73 | Integer32 | RC | |
column · Integer32 · read-create · current Peak Information Rate - bandwidth values in kilobits per second.
| ||||
| CalaQoSActionPIRStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether PIR value is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionPBS | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75 | Integer32 (0..2147450880) | RC | |
column · Integer32 (0..2147450880) · read-create · current Peak Burst Size - bucket size in byte. | ||||
| CalaQoSActionPBSStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether PBS value is specified(enabled) or not(disabled).
| ||||
| CalaQoSActionCounterColor | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the color mode for the counters which will be used for sr/trTCM.
| ||||
| CalaQoSActionRTCPMonitor | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.78 | INTEGER | RC | |
column · INTEGER · read-create · current RTCP Monitor status for the traffic.
| ||||
| CalaQoSActionRTCPMonitorStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.79 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the RTCP Monitor field for the traffic.
| ||||
| CalaQoSActionRTCPDSCP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.80 | Integer32 | RC | |
column · Integer32 · read-create · current RTCP DSCP number for the traffic. | ||||
| CalaQoSActionRTCPDSCPStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.81 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the RTCP DSCP field for the traffic.
| ||||
| CalaQoSActionTrustDSCP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.82 | INTEGER | RC | |
column · INTEGER · read-create · current Trust DSCP status for the traffic.
| ||||
| CalaQoSActionTrustDSCPStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.83 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the Trust DSCP field for the traffic.
| ||||
| TalaQoSAppliedActionTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28 | NA | ||
table · not-accessible · current Table of QoS AppliedAction definitions | ||||
| RalaQoSAppliedActionEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1 | NA | ||
| CalaQoSAppliedActionName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of action | ||||
| CalaQoSAppliedActionSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the action.
| ||||
| CalaQoSAppliedActionDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Disposition of traffic using the action. Use to filter out unwanted traffic.
| ||||
| CalaQoSAppliedActionDropAlgorithm | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Which drop algorithm should be used to discard traffic when oversubscribed.
| ||||
| CalaQoSAppliedActionWredMaximumThreshold | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Bandwidth at which WRED should discard most traffic. | ||||
| CalaQoSAppliedActionWredMaximumThresholdStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionWredMinimumThreshold | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Bandwidth at which WRED should start to discard traffic. | ||||
| CalaQoSAppliedActionWredMinimumThresholdStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionWredMaximumProbability | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Probabilty that traffic will be dropped at WRED maximum threshold. | ||||
| CalaQoSAppliedActionWredMaximumProbabilityStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionMinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum bandwidth (Kbits/sec) to guarantee for traffic | ||||
| CalaQoSAppliedActionMinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionMaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum bandwidth (Kbits/sec) allowed for traffic | ||||
| CalaQoSAppliedActionMaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionPeakBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Peak bandwidth (Kbits/sec) allowed for traffic | ||||
| CalaQoSAppliedActionPeakBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether peak bandwidth is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionPriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.17 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current Internal and queueing priority to use for traffic. | ||||
| CalaQoSAppliedActionPriorityStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether priority is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionShared | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
| ||||
| CalaQoSAppliedActionJitter | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum jitter to allow for traffic. | ||||
| CalaQoSAppliedActionJitterStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether jitter is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionLatency | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum latency to allow for traffic. | ||||
| CalaQoSAppliedActionLatencyStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether latency is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionMaximumDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications. | ||||
| CalaQoSAppliedActionMaximumDepthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether maximum depth is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionMaximumBuffers | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.26 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current Maxmimum buffers for queues for traffic. | ||||
| CalaQoSAppliedActionMaximumBuffersStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether maximum buffers is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedAction8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.28 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current 802.1p value to stamp on traffic. | ||||
| CalaQoSAppliedAction8021pStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether 802.1p is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionTos | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.30 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current TOS value to stamp on traffic. (High 3 bits of TOS byte) | ||||
| CalaQoSAppliedActionTosStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether TOS is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionDscp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.32 | Integer32 (0..63) | RO | |
column · Integer32 (0..63) · read-only · current TOS value to stamp on traffic. (High 6 bits of TOS byte) | ||||
| CalaQoSAppliedActionDscpStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether DSCP is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionMapFrom | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current What field to use as key for mapping 802.1p/TOS/DSCP priorities
| ||||
| CalaQoSAppliedActionMapTo | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.35 | INTEGER | RO | |
column · INTEGER · read-only · current What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
| ||||
| CalaQoSAppliedActionMapGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.36 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of the map group to use when remapping 802.1p/TOS/DSCP priorities. | ||||
| CalaQoSAppliedActionMapGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.37 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether a map group is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionSourceRewriteIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.38 | IpAddress | RO | |
column · IpAddress · read-only · current Source IP address to rewrite on traffic. | ||||
| CalaQoSAppliedActionSourceRewriteIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.39 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionSourceRewriteIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.40 | IpAddress | RO | |
column · IpAddress · read-only · current Source rewrite IP mask to determine how much of source IP to rewrite. | ||||
| CalaQoSAppliedActionSourceRewriteNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.41 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condition. | ||||
| CalaQoSAppliedActionSourceRewriteNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.42 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether source rewrite network group is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionDestinationRewriteIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.43 | IpAddress | RO | |
column · IpAddress · read-only · current Destination IP address to rewrite on traffic. | ||||
| CalaQoSAppliedActionDestinationRewriteIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.44 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionDestinationRewriteIpMask | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.45 | IpAddress | RO | |
column · IpAddress · read-only · current Destination rewrite IP mask to determine how much of destination IP to rewrite. | ||||
| CalaQoSAppliedActionDestinationRewriteNetworkGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.46 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition. | ||||
| CalaQoSAppliedActionDestinationRewriteNetworkGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.47 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionLoadBalanceGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.48 | DisplayString (SIZE (0..23)) | RO | |
column · DisplayString (SIZE (0..23)) · read-only · current Name of load balance group to use for traffic | ||||
| CalaQoSAppliedActionLoadBalanceGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.49 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether load balanace group is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionPermanentGatewayIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.50 | IpAddress | RO | |
column · IpAddress · read-only · current Next hop gateway to use for traffic | ||||
| CalaQoSAppliedActionPermanentGatewayIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.51 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionAlternateGatewayIpAddr | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.52 | IpAddress | RO | |
column · IpAddress · read-only · current Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes. | ||||
| CalaQoSAppliedActionAlternateGatewayIpAddrStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.53 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.54 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete actions according to the RowStatus convention | ||||
| CalaQoSAppliedActionMinimumDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.55 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications. | ||||
| CalaQoSAppliedActionMinimumDepthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.56 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether minimum depth is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionVPNAccess | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.57 | INTEGER | RO | |
column · INTEGER · read-only · current How to encrypt traffic
| ||||
| CalaQoSAppliedActionNocache | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.58 | INTEGER | RO | |
column · INTEGER · read-only · current When enabled, don't make hardware entries for matching flows.
| ||||
| CalaQoSAppliedActionPortdisable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.59 | INTEGER | RO | |
column · INTEGER · read-only · current When enabled, disable the physical source port of the traffic.
| ||||
| CalaQoSAppliedActionRedirectSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.60 | Integer32 (0..16) | RO | |
column · Integer32 (0..16) · read-only · current Destination physical slot for redirected traffic | ||||
| CalaQoSAppliedActionRedirectSlotStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.61 | INTEGER | RO | |
column · INTEGER · read-only · current Status for alaQoSAppliedActionRedirectSlotStatus field
| ||||
| CalaQoSAppliedActionRedirectPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.62 | Integer32 (1..52) | RO | |
column · Integer32 (1..52) · read-only · current Destination physical port for redirected traffic | ||||
| CalaQoSAppliedActionRedirectAgg | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.63 | Integer32 (0..32) | RO | |
column · Integer32 (0..32) · read-only · current Destination linkagg for redirected traffic | ||||
| CalaQoSAppliedActionRedirectAggStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.64 | INTEGER | RO | |
column · INTEGER · read-only · current Status for alaQoSAppliedActionRedirectAggStatus field
| ||||
| CalaQoSAppliedActionMirrorSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.65 | Integer32 (0..16) | RO | |
column · Integer32 (0..16) · read-only · current Destination physical slot for mirrored traffic | ||||
| CalaQoSAppliedActionMirrorPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.66 | Integer32 (1..52) | RO | |
column · Integer32 (1..52) · read-only · current Destination physical port for mirrored traffic | ||||
| CalaQoSAppliedActionMirrorMode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.67 | INTEGER | RO | |
column · INTEGER · read-only · current Mirroring mode
| ||||
| CalaQoSAppliedActionMirrorModeStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.68 | INTEGER | RO | |
column · INTEGER · read-only · current Status for alaQoSAppliedActionMirrorMode field
| ||||
| CalaQoSAppliedActionCIR | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.69 | Integer32 | RC | |
column · Integer32 · read-create · current Committed Information Rate - bandwidth values in kilobits per second.
| ||||
| CalaQoSAppliedActionCIRStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.70 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether CIR value is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionCBS | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.71 | Integer32 (0..2147450880) | RC | |
column · Integer32 (0..2147450880) · read-create · current Committed Burst Size - bucket size in byte. | ||||
| CalaQoSAppliedActionCBSStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.72 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether CBS value is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionPIR | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.73 | Integer32 | RC | |
column · Integer32 · read-create · current Peak Information Rate - bandwidth values in kilobits per second.
| ||||
| CalaQoSAppliedActionPIRStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.74 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether PIR value is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionPBS | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.75 | Integer32 (0..2147450880) | RC | |
column · Integer32 (0..2147450880) · read-create · current Peak Burst Size - bucket size in byte. | ||||
| CalaQoSAppliedActionPBSStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.76 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether PBS value is specified(enabled) or not(disabled).
| ||||
| CalaQoSAppliedActionCounterColor | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.77 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the color mode for the counters which will be used for sr/trTCM.
| ||||
| CalaQoSAppliedActionRTCPMonitor | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.78 | INTEGER | RC | |
column · INTEGER · read-create · current RTCP Monitor status for the traffic.
| ||||
| CalaQoSAppliedActionRTCPMonitorStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.79 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the RTCP Monitor field for the traffic.
| ||||
| CalaQoSAppliedActionRTCPDSCP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.80 | Integer32 | RC | |
column · Integer32 · read-create · current RTCP DSCP number for the traffic. | ||||
| CalaQoSAppliedActionRTCPDSCPStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.81 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the RTCP DSCP field for the traffic.
| ||||
| CalaQoSAppliedActionTrustDSCP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.82 | INTEGER | RC | |
column · INTEGER · read-create · current Trust DSCP status for the traffic.
| ||||
| CalaQoSAppliedActionTrustDSCPStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.83 | INTEGER | RC | |
column · INTEGER · read-create · current Status of the Trust DSCP field for the traffic.
| ||||
| TalaQoSPortTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29 | NA | ||
table · not-accessible · current Table of QoS Port definitions | ||||
| RalaQoSPortEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1 | NA | ||
| CalaQoSPortSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.1 | Integer32 (0..16) | NA | |
column · Integer32 (0..16) · not-accessible · current Physical slot port resides on | ||||
| CalaQoSPortPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.2 | Integer32 (0..52) | NA | |
column · Integer32 (0..52) · not-accessible · current Physical port number | ||||
| CalaQoSPortEnabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Pending QoS enable status for the physical port Does not take effect until an 'Apply' command is issued
| ||||
| CalaQoSPortAppliedEnabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Current QoS enable status for the physical port
| ||||
| CalaQoSPortInterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The type of interface QoS matches for this physical port
| ||||
| CalaQoSPortTrusted | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Status of trusting 802.1p/TOS/DSCP values. When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are set to the port defaults.
| ||||
| CalaQoSPortDefault8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.7 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current 802.1p priority value to use for untagged frames arriving on the port and tagged frames when the port is untrusted. | ||||
| CalaQoSPortDefaultDSCP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.8 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current DSCP value to stamp in frames arriving on the port when the port is untrusted | ||||
| CalaQoSPortMaximumReservedBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current Pending maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued | ||||
| CalaQoSPortMaximumReservedBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Pending status field indicating whether to enforce maximum reservable bandwidth on next 'Apply'
| ||||
| CalaQoSPortAppliedMaximumReservedBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Current maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth. | ||||
| CalaQoSPortAppliedMaximumReservedBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Current status field indicating whether to enforce maximum reservable bandwidth.
| ||||
| CalaQoSPortMaximumSignalledBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.13 | Integer32 | RC | |
column · Integer32 · read-create · current Pending maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued | ||||
| CalaQoSPortMaximumSignalledBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Pending status field indicating whether to enforce maximum signalled bandwidth on next 'Apply'
| ||||
| CalaQoSPortAppliedMaximumSignalledBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Current maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth. | ||||
| CalaQoSPortAppliedMaximumSignalledBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Current status field indicating whether to enforce maximum signalled bandwidth.
| ||||
| CalaQoSPortDefaultQueues | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.17 | Integer32 (8) | RC | |
column · Integer32 (8) · read-create · current Pending number of default queues for the port Overrides any switch-wide default queue setting | ||||
| CalaQoSPortAppliedDefaultQueues | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.18 | Integer32 (8) | RO | |
column · Integer32 (8) · read-only · current Current number of default queues for the port Overrides any switch-wide default queue setting | ||||
| CalaQoSPortMaximumDefaultBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.19 | Integer32 | RC | |
column · Integer32 · read-create · current Pending maximum default bandwidth (Kbits/sec). Maximum rate for default queues on this port Does not take effect until an 'Apply' command is issued | ||||
| CalaQoSPortMaximumDefaultBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.20 | INTEGER | RC | |
column · INTEGER · read-create · current Pending status field indicating whether to enforce maximum default bandwidth on next 'Apply'
| ||||
| CalaQoSPortAppliedMaximumDefaultBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current Current maximum default bandwidth (Kbits/sec). Maximum rate for default queues this port | ||||
| CalaQoSPortAppliedMaximumDefaultBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current Current status field indicating whether to enforce maximum default bandwidth.
| ||||
| CalaQoSPortMaximumDefaultDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.23 | Integer32 | RC | |
column · Integer32 · read-create · current Pending maximum depth of egress queues (Kbytes). Maximum depth of queues on this port Does not take effect until an 'Apply' command is issued | ||||
| CalaQoSPortMaximumDefaultDepthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current Pending status field indicating whether to enforce maximum depth on next 'Apply'
| ||||
| CalaQoSPortAppliedMaximumDefaultDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current Current maximum depth of egress queues (Kbytes). Maximum depth of queues on this port | ||||
| CalaQoSPortAppliedMaximumDefaultDepthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current Current status field indicating whether to enforce maximum depth.
| ||||
| CalaQoSPortMaximumDefaultBuffers | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.27 | Integer32 | RC | |
column · Integer32 · read-create · current Pending maximum buffers for egress queues. Maximum number of buffers for queues on this port Does not take effect until an 'Apply' command is issued | ||||
| CalaQoSPortMaximumDefaultBuffersStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.28 | INTEGER | RC | |
column · INTEGER · read-create · current Pending status field indicating whether to enforce maximum buffers on next 'Apply'
| ||||
| CalaQoSPortAppliedMaximumDefaultBuffers | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current Current maximum buffers for egress queues. Maximum number of buffers for queues on this port | ||||
| CalaQoSPortAppliedMaximumDefaultBuffersStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current Current status field indicating whether to enforce maximum buffers.
| ||||
| CalaQoSPortReset | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.31 | INTEGER | RC | |
column · INTEGER · read-create · current Reset all QoS parameters to default values
| ||||
| CalaQoSPortPhysicalBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.32 | Integer32 | RO | |
column · Integer32 · read-only · current Physical bandwidth of port (Kbit/sec) | ||||
| CalaQoSPortReservedBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.33 | Integer32 | RO | |
column · Integer32 · read-only · current Bandwidth reserved by policies on port (Kbit/sec) | ||||
| CalaQoSPortSignalledBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.34 | Integer32 | RO | |
column · Integer32 · read-only · current Bandwidth reserved by signalling on port (Kbit/sec) | ||||
| CalaQoSPortCurrentBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.35 | Integer32 | RO | |
column · Integer32 · read-only · current Current measured bandwidth of port (Kbits/sec) | ||||
| CalaQoSPortDefaultQidLow | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.36 | Integer32 | RO | |
column · Integer32 · read-only · current Default low queue ID | ||||
| CalaQoSPortDefaultQidMedium | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.37 | Integer32 | RO | |
column · Integer32 · read-only · current Default medium queue ID | ||||
| CalaQoSPortDefaultQidHigh | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.38 | Integer32 | RO | |
column · Integer32 · read-only · current Default high queue ID | ||||
| CalaQoSPortDefaultQidUrgent | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.39 | Integer32 | RO | |
column · Integer32 · read-only · current Default urgent queue ID | ||||
| CalaQoSPortFloodQid | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.40 | Integer32 | RO | |
column · Integer32 · read-only · current ID of the flood queue | ||||
| CalaQoSPortQueues | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.41 | Integer32 | RO | |
column · Integer32 · read-only · current Number of queues currently on the port | ||||
| CalaQoSPortQueuesCreated | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.42 | Integer32 | RO | |
column · Integer32 · read-only · current Number of queue requests on the port | ||||
| CalaQoSPortQueuesFailed | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.43 | Integer32 | RO | |
column · Integer32 · read-only · current Number of queue requests that failed on the port | ||||
| CalaQoSPortQueuesPreempted | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.44 | Integer32 | RO | |
column · Integer32 · read-only · current Number of queues preempted on the port | ||||
| CalaQoSPortRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.45 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete ports according to the RowStatus convention | ||||
| CalaQoSPortFirPrio0EnqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.46 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 0 enqueue byte count | ||||
| CalaQoSPortFirPrio0DeqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.47 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 0 dequeue byte count | ||||
| CalaQoSPortFirPrio0EnqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.48 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 0 enqueue packet count | ||||
| CalaQoSPortFirPrio0DeqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.49 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 0 dequeue packet count | ||||
| CalaQoSPortFirPrio0QidDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.50 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 0 QID discard packet count | ||||
| CalaQoSPortFirPrio0WredDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.51 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 0 WRED discard packet count | ||||
| CalaQoSPortFirPrio0OverflowDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.52 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 0 overflow discard packet count | ||||
| CalaQoSPortFirPrio1EnqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.53 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 1 enqueue byte count | ||||
| CalaQoSPortFirPrio1DeqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.54 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 1 dequeue byte count | ||||
| CalaQoSPortFirPrio1EnqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.55 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 1 enqueue packet count | ||||
| CalaQoSPortFirPrio1DeqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.56 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 1 dequeue packet count | ||||
| CalaQoSPortFirPrio1QidDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.57 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 1 QID discard packet count | ||||
| CalaQoSPortFirPrio1WredDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.58 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 1 WRED discard packet count | ||||
| CalaQoSPortFirPrio1OverflowDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.59 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 1 overflow discard packet count | ||||
| CalaQoSPortFirPrio2EnqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.60 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 2 enqueue byte count | ||||
| CalaQoSPortFirPrio2DeqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.61 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 2 dequeue byte count | ||||
| CalaQoSPortFirPrio2EnqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.62 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 2 enqueue packet count | ||||
| CalaQoSPortFirPrio2DeqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.63 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 2 dequeue packet count | ||||
| CalaQoSPortFirPrio2QidDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.64 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 2 QID discard packet count | ||||
| CalaQoSPortFirPrio2WredDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.65 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 2 WRED discard packet count | ||||
| CalaQoSPortFirPrio2OverflowDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.66 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 2 overflow discard packet count | ||||
| CalaQoSPortFirPrio3EnqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.67 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 3 enqueue byte count | ||||
| CalaQoSPortFirPrio3DeqBytes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.68 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 3 dequeue byte count | ||||
| CalaQoSPortFirPrio3EnqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.69 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 3 enqueue packet count | ||||
| CalaQoSPortFirPrio3DeqPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.70 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 3 dequeue packet count | ||||
| CalaQoSPortFirPrio3QidDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.71 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 3 QID discard packet count | ||||
| CalaQoSPortFirPrio3WredDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.72 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 3 WRED discard packet count | ||||
| CalaQoSPortFirPrio3OverflowDiscardPkts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.73 | Counter64 | RO | |
column · Counter64 · read-only · current Firenze priority 3 overflow discard packet count | ||||
| CalaQoSPortDefaultClassification | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.74 | INTEGER | RC | |
column · INTEGER · read-create · current Ingress traffic classification parameter for Firenze port What field to interpret as priority for WRED
| ||||
| CalaQoSPortLowPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.75 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for low priority egress queue on fixed queue blades. | ||||
| CalaQoSPortMediumPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.76 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for medium priority egress queue on fixed queue blades. | ||||
| CalaQoSPortHighPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.77 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for high priority egress queue on fixed queue blades. | ||||
| CalaQoSPortUrgentPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.78 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for urgent priority egress queue on fixed queue blades. | ||||
| CalaQoSPortMaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.79 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this port | ||||
| CalaQoSPortMaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.80 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on port.
| ||||
| CalaQoSPortEnqueuingThresholdP0Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.81 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 0 FIFO lower threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdP0Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.82 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 0 FIFO upper threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdP1Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.83 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 1 FIFO lower threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdP1Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.84 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 1 FIFO upper threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdP2Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.85 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 2 FIFO lower threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdP2Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.86 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 2 FIFO upper threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdP3Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.87 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 3 FIFO lower threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdP3Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.88 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 3 FIFO upper threshold for high density module | ||||
| CalaQoSPortEnqueuingThresholdStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.89 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether enqueuing thresholds need to be enforced on high density module.
| ||||
| CalaQoSPortHighDensity | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.90 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether this is a high-density port or not.
| ||||
| CalaQoSPortServicingMode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.91 | INTEGER | RC | |
column · INTEGER · read-create · current Servicing mode for the port
| ||||
| CalaQoSPortFreeFFPRules | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.92 | Integer32 | RO | |
column · Integer32 · read-only · current Number of Free FPP rule entries | ||||
| CalaQoSPortUsedFFPRules | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.93 | Integer32 | RO | |
column · Integer32 · read-only · current Number of Used FPP rule entries | ||||
| CalaQoSPortFreeFFPMasks | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.94 | Integer32 | RO | |
column · Integer32 · read-only · current Number of Free FPP mask entries | ||||
| CalaQoSPortUsedFFPMasks | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.95 | Integer32 | RO | |
column · Integer32 · read-only · current Number of Free FPP mask enries | ||||
| CalaQoSPortSpoofedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.96 | Integer32 | RO | |
column · Integer32 · read-only · current Spoofed packet count | ||||
| CalaQoSPortNonSpoofedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.97 | Integer32 | RO | |
column · Integer32 · read-only · current Non-spoofed packet count | ||||
| CalaQoSPortQ4PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.98 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for cos queue 4. | ||||
| CalaQoSPortQ5PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.99 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for cos queue 5. | ||||
| CalaQoSPortQ6PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.100 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for cos queue 6. | ||||
| CalaQoSPortQ7PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.101 | Integer32 (0..15) | RC | |
column · Integer32 (0..15) · read-create · current Weight to use for cos queue 7. | ||||
| CalaQoSPortCOS0MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.102 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS0MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.103 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS1MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.104 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS1MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.105 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS2MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.106 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS2MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.107 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS3MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.108 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS3MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.109 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS4MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.110 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS4MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.111 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS5MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.112 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS5MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.113 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS6MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.114 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS6MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.115 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS7MaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.116 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue | ||||
| CalaQoSPortCOS7MaximumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.117 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on queue.
| ||||
| CalaQoSPortCOS0MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.118 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS0MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.119 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortCOS1MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.120 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS1MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.121 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortCOS2MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.122 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS2MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.123 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortCOS3MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.124 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS3MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.125 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortCOS4MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.126 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS4MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.127 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortCOS5MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.128 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS5MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.129 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortCOS6MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.130 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS6MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.131 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortCOS7MinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.132 | Integer32 | RC | |
column · Integer32 · read-create · current Minimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue | ||||
| CalaQoSPortCOS7MinimumBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.133 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce minimum bandwidth on queue.
| ||||
| CalaQoSPortMaximumIngBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.134 | Integer32 | RC | |
column · Integer32 · read-create · current Maximum igress bandwidth (Kbits/sec). Maximum rate to recieve traffic in on this port | ||||
| CalaQoSPortMaximumIngBandwidthStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.135 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether to enforce maximum bandwidth on port.
| ||||
| CalaQoSPortDEIMarking | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.136 | INTEGER | RC | |
column · INTEGER · read-create · current This object specifies if, in egress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).
enabled(1) -- the DEI/CFI bit will be set in egress traffic.
disabled(2) -- the DEI/CFI bit will not be set in egress traffic.
| ||||
| CalaQoSPortMonitor | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.137 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used to monitor a slot/port on which user is interested to get the cos egress statistics. enabled(1) -- monitor the slot/port to gather per port cos egress statistics. disabled(2) -- reset the previously monitored slot/port.
| ||||
| CalaQoSPortDEIMapping | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.138 | INTEGER | RC | |
column · INTEGER · read-create · current This object specifies if, in ingress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in ingress traffic. disabled(2) -- the DEI/CFI bit will not be set in ingress traffic.
| ||||
| NalaQoSConfig | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30 | |||
| SalaQoSConfigEnabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Is QoS enabled on the switch
| ||||
| SalaQoSConfigDefaultQueues | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.2 | Integer32 (2..8) | RW | |
scalar · Integer32 (2..8) · read-write · current Pending number of default queues to create for each port. Can be overridden on a port by port basis. Does not take affect until an 'Apply' command is issued. | ||||
| SalaQoSConfigAppliedDefaultQueues | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.3 | Integer32 (2..8) | RO | |
scalar · Integer32 (2..8) · read-only · current Number of default queues configured at last 'Apply' command. | ||||
| SalaQoSConfigTrustPorts | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flag to indicate whether to trust the 802.1p/TOS values on incoming traffic by default. Can be overridden on a port by port basis.
| ||||
| SalaQoSConfigFlowTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.5 | Integer32 (2..3600) | RW | |
scalar · Integer32 (2..3600) · read-write · current Pending flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds. Does not take effect until an 'Apply' command is issued | ||||
| SalaQoSConfigAppliedFlowTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.6 | Integer32 (2..3600) | RO | |
scalar · Integer32 (2..3600) · read-only · current Current flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds. | ||||
| SalaQoSConfigFragmentTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.7 | Integer32 (2..60) | RW | |
scalar · Integer32 (2..60) · read-write · current Pending fragment timeout (seconds). Packet fragments are remembered for this many seconds. Does not take effect until an 'Apply' command is issued | ||||
| SalaQoSConfigAppliedFragmentTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.8 | Integer32 (2..60) | RO | |
scalar · Integer32 (2..60) · read-only · current Current fragment timeout (seconds). Packet fragments are remembered for this many seconds. | ||||
| SalaQoSConfigReflexiveTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.9 | Integer32 (10..3000) | RW | |
scalar · Integer32 (10..3000) · read-write · current Pending reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response. Does not take effect until an 'Apply' command is issued | ||||
| SalaQoSConfigAppliedReflfexiveTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.10 | Integer32 (10..3000) | RO | |
scalar · Integer32 (10..3000) · read-only · current Current reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response. | ||||
| SalaQoSConfigNatTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.11 | Integer32 (10..200000) | RW | |
scalar · Integer32 (10..200000) · read-write · current Pending nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction. Does not take effect until an 'Apply' command is issued | ||||
| SalaQoSConfigAppliedNatTimeout | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.12 | Integer32 (10..200000) | RO | |
scalar · Integer32 (10..200000) · read-only · current Current nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in either direction. | ||||
| SalaQoSConfigClassifyl3Bridged | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Pending indicator for looking at L3/L4 parameters of bridged traffic. Does not take effect until an 'Apply' command is issued.
| ||||
| SalaQoSConfigAppliedClassifyl3Bridged | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current indicator for looking at L3/L4 parameters of bridged traffic.
| ||||
| SalaQoSConfigClassifyFragments | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Pending indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
| ||||
| SalaQoSConfigAppliedClassifyFragments | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
| ||||
| SalaQoSConfigDefaultBridgedDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Pending disposition of bridged traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
| ||||
| SalaQoSConfigAppliedDefaultBridgedDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.18 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current disposition of bridged traffic that doesn't match a policy.
| ||||
| SalaQoSConfigDefaultRoutedDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Pending disposition of routed traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
| ||||
| SalaQoSConfigAppliedDefaultRoutedDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.20 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current disposition of routed traffic that doesn't match a policy
| ||||
| SalaQoSConfigDefaultMulticastDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current Pending disposition of IGMP requests that don't match a policy Does not take effect until an 'Apply' command is issued
| ||||
| SalaQoSConfigAppliedDefaultMulticastDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.22 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current disposition of IGMP requests that don't match a policy
| ||||
| SalaQoSConfigStatsInterval | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.23 | Integer32 (10..3600) | RW | |
scalar · Integer32 (10..3600) · read-write · current Interval in seconds for how often statistics are updated | ||||
| SalaQoSConfigLogLines | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.24 | Integer32 (0..1024) | RW | |
scalar · Integer32 (0..1024) · read-write · current Number of log lines to maintain in the QoS log | ||||
| SalaQoSConfigLogLevel | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.25 | Integer32 (2..9) | RW | |
scalar · Integer32 (2..9) · read-write · current The level of logging desired. The higher the level, the more verbose the logging | ||||
| SalaQoSConfigLogConsole | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether QoS log events are logged to the console
| ||||
| SalaQoSConfigForwardLog | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether QoS forwards logging events to PolicyManager
| ||||
| SalaQoSConfigClearLog | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear the QoS log
| ||||
| SalaQoSConfigApply | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.29 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set to apply all pending QoS configuration/policy changes
| ||||
| SalaQoSConfigRevert | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set to revert all pending QoS configuration/policy changes
| ||||
| SalaQoSConfigReset | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.31 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set to reset global QoS configuration parameters to their default values
| ||||
| SalaQoSConfigStatsReset | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.32 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set to reset global QoS statistics counters
| ||||
| SalaQoSConfigFlush | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.33 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flush all pending policy objects
| ||||
| SalaQoSConfigDebug | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.34 | Integer32 | RW | |
scalar · Integer32 · read-write · current Possible debug flags for QoS | ||||
| SalaQoSConfigServicingMode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.35 | INTEGER | RC | |
scalar · INTEGER · read-create · current Servicing mode for the system
| ||||
| SalaQoSConfigLowPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.36 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for low priority queue(0) on fixed queue blades | ||||
| SalaQoSConfigMediumPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.37 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for medium priority queue(1) on fixed queue blades | ||||
| SalaQoSConfigHighPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.38 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for high priority queue(2) on fixed queue blades | ||||
| SalaQoSConfigUrgentPriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.39 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for urgent priority queue(3) on fixed queue blades | ||||
| SalaQoSConfigQ4PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.40 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for COS 4 priority queue(4) on fixed queue blades | ||||
| SalaQoSConfigQ5PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.41 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for COS 5 priority queue(5) on fixed queue blades | ||||
| SalaQoSConfigQ6PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.42 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for COS 6 priority queue(6) on fixed queue blades | ||||
| SalaQoSConfigQ7PriorityWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.43 | Integer32 (0..15) | RC | |
scalar · Integer32 (0..15) · read-create · current Weight to use for COS 7 priority queue(7) on fixed queue blades | ||||
| SalaQoSConfigUserportFilter | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.44 | Integer32 | RC | |
scalar · Integer32 · read-create · current Events/protocols to filter on a Userport. Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024 | ||||
| SalaQoSConfigAppliedUserportFilter | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.45 | Integer32 | RO | |
scalar · Integer32 · read-only · current Events/protocols to filter on a Userport. Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024 | ||||
| SalaQoSConfigUserportShutdown | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.46 | Integer32 | RC | |
scalar · Integer32 · read-create · current Events/protocols that trigger admin down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024 | ||||
| SalaQoSConfigAppliedUserportShutdown | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.47 | Integer32 | RO | |
scalar · Integer32 · read-only · current Events/protocols that trigger admin down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024 | ||||
| SalaQoSConfigAutoNMS | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.48 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flag to indicate whether to Prioritize NMS traffic by default.
| ||||
| SalaQoSConfigAutoPhones | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.49 | INTEGER | RW | |
scalar · INTEGER · read-write · current Auto configure CSBU Phones pri0-7 - will replace the priority. trusted - will allow priority from the orginator to be used. disable - will unconfigure to feature.
| ||||
| SalaQoSConfigQMPage | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.50 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified.
| ||||
| SalaQoSConfigQMMACGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.51 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Group name for quarantine manager quarantined MACs. | ||||
| SalaQoSConfigQMPath | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.52 | DisplayString (SIZE (0..255)) | RW | |
scalar · DisplayString (SIZE (0..255)) · read-write · current Default path for remediation server redirect. | ||||
| SalaQoSConfigDEIMapping | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.53 | INTEGER | RC | |
scalar · INTEGER · read-create · current This object specifies, in ingress traffic, the DEI/CFI bit is mapped
or not to internal drop precedence or yellow color.
enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow
color if that bit is set.
disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow
color.
| ||||
| SalaQoSConfigDEIMarking | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.54 | INTEGER | RC | |
scalar · INTEGER · read-create · current This object specifies, in egress traffic, the DEI/CFI bit is mapped
or not to internal drop precedence or yellow color.
enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow
color if that bit is set.
disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow
color.
| ||||
| SalaQoSConfigStatsResetEgress | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.55 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set to reset global Egress QoS statistics counters
| ||||
| SalaQoSConfigForceYellowPriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.56 | INTEGER | RW | |
scalar · INTEGER · read-write · current Change the Priority for Yellow Traffic pri0-7 - will replace the priority. disable - will unconfigure to feature.
| ||||
| SalaQoSConfigMulticastRateLimit | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.57 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to set rate Limit in case of Qos debug
| ||||
| SalaQoSConfigForceYellowDSCP | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.59 | INTEGER | RW | |
scalar · INTEGER · read-write · current Change the DSCP value for Yellow Traffic pri0-63 - will replace the priority. disable - will unconfigure the feature.
| ||||
| SalaQoSConfigUserportLinkShutdown | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.61 | Integer32 | RC | |
scalar · Integer32 · read-create · current Events/protocols that trigger link shut down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024 | ||||
| SalaQoSConfigAppliedUserportLinkShutdown | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.62 | Integer32 | RO | |
scalar · Integer32 · read-only · current Events/protocols that trigger Link shut down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 is-is = 512 dnsreply = 1024 | ||||
| SalaQoSConfigNATFlush | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.63 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flush all NAT Flow entries
| ||||
| SalaQoSConfigForceYellowUserPriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.64 | INTEGER | RW | |
scalar · INTEGER · read-write · current Change the 8021P Priority for Yellow Traffic pri0-7 - will replace the priority. disable - will unconfigure the feature.
| ||||
| NalaQoSStats | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31 | |||
| SalaQoSStatsL2Events | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L2 classification events | ||||
| SalaQoSStatsL2Matches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L2 classifications matching a policy | ||||
| SalaQoSStatsL2Drops | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L2 classifications matching a drop policy | ||||
| SalaQoSStatsL3IngressEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L3/L4 ingress classification events | ||||
| SalaQoSStatsL3IngressMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L3 ingress classifications matching a policy | ||||
| SalaQoSStatsL3IngressDrops | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L3 ingress classifications matching a drop policy | ||||
| SalaQoSStatsL3EgressEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L3/L4 egress classification events | ||||
| SalaQoSStatsL3EgressMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L3 egress classifications matching a policy | ||||
| SalaQoSStatsL3EgressDrops | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of L3 egress classifications matching a drop policy | ||||
| SalaQoSStatsMulticastEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of IGMP classification events | ||||
| SalaQoSStatsMulticastMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of IGMP classifications matching a policy | ||||
| SalaQoSStatsMulticastDrops | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of IGMP classifications matching a drop policy | ||||
| SalaQoSStatsFragments | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of fragments processed by QoS | ||||
| SalaQoSStatsBadFragments | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of illegal (offset = 1) fragments | ||||
| SalaQoSStatsUnknownFragments | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of out of order fragment pieces | ||||
| SalaQoSStatsReflexiveFlows | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of reflexive flow entries | ||||
| SalaQoSStatsReflexiveCorrections | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of reflexive flow corrections | ||||
| SalaQoSStatsLoadBalanceFlows | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.18 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of server load balanced flow entries | ||||
| SalaQoSStatsClassifierMaxNodes | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current Highest number of nodes in classifier tree | ||||
| SalaQoSStatsClassifierMaxDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current Length of longest path in classifier tree | ||||
| SalaQoSStatsFlowLookups | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of flow table lookups | ||||
| SalaQoSStatsFlowHits | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of flow table lookup hits | ||||
| SalaQoSStatsSentNIMessages | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.23 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of messages sent to NIs | ||||
| SalaQoSStatsReceivedNIMessages | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.24 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of messages received from NIs | ||||
| SalaQoSStatsFailedNIMessages | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.25 | Counter32 | RO | |
scalar · Counter32 · read-only · current Number of failed message attemptes to NIs | ||||
| SalaQoSStatsSpoofedEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.26 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total Number of spoofed events | ||||
| SalaQoSStatsNonSpoofedEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.27 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of non-spoofed events | ||||
| SalaQoSStatsDropServicesEvents | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.28 | Counter32 | RO | |
scalar · Counter32 · read-only · current Total number of packets matching the DropServices group | ||||
| TalaQoSQueueTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32 | NA | ||
table · not-accessible · current Table of QoS Queue definitions | ||||
| RalaQoSQueueEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1 | NA | ||
| CalaQoSQueueId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current Internal queue identifier | ||||
| CalaQoSQueueSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.2 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Physical slot queue is destined to | ||||
| CalaQoSQueuePort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Physical port queue is destined to | ||||
| CalaQoSQueuePortId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.4 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Internal global port id of destination port | ||||
| CalaQoSQueueType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Type of queueing done on this queue
| ||||
| CalaQoSQueuePriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.6 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Queueing priority for the queue | ||||
| CalaQoSQueueMinimumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum bandwidth (Kbits/sec) given to the queue | ||||
| CalaQoSQueueMaximumBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum bandwidth (Kbits/sec) given to the queue | ||||
| CalaQoSQueueAverageBandwidth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Average measured bandwidth (Kbits/sec) for the queue | ||||
| CalaQoSQueueMinimumDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum depth (Kbytes) of the queue | ||||
| CalaQoSQueueMaximumDepth | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum depth (Kbytes) of the queue | ||||
| CalaQoSQueueMaximumBuffers | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.12 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Maximum number of buffers for the queue | ||||
| CalaQoSQueue8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.13 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current 802.1p value queue places on traffic | ||||
| CalaQoSQueuePacketsSent | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Number of packets sent through the queue | ||||
| CalaQoSQueuePacketsDropped | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Number of packets dropped trying to queue into this queue | ||||
| CalaQoSQueueMaxLength | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum measured length the queue has reached in buffers | ||||
| CalaQoSQueueAverageLength | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current Average measured length of the queue in buffers | ||||
| CalaQoSQueueCurrentLength | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current Current measured length of the queue in buffers | ||||
| CalaQoSQueueAction | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.19 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Name of the action this queue was created from | ||||
| TalaQoSSlotTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33 | NA | ||
table · not-accessible · current Table of QoS Slot definitions | ||||
| RalaQoSSlotEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1 | NA | ||
| CalaQoSSlotSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.1 | Integer32 (1..16) | NA | |
column · Integer32 (1..16) · not-accessible · current Physical slot number | ||||
| CalaQoSSlotSlice | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.2 | Integer32 (0..4) | NA | |
column · Integer32 (0..4) · not-accessible · current Physical device number on slot | ||||
| CalaQoSSlotType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Type of hardware in this slot/slice
| ||||
| CalaQoSSlotMaxBuffers | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum total buffers on this slot/slice | ||||
| CalaQoSSlotFreeBuffers1 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Current free buffers in list 1 | ||||
| CalaQoSSlotFreeBuffers2 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Current free buffers in list 2 | ||||
| CalaQoSSlotThreshold1Low | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to low priority traffic from list 1 when free buffers in list 1 is less than this threshold. | ||||
| CalaQoSSlotThreshold1Medium | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to medium priority traffic from list 1 when free buffers in list 1 is less than this threshold. | ||||
| CalaQoSSlotThreshold1High | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to high priority traffic from list 1 when free buffers in list 1 is less than this threshold. | ||||
| CalaQoSSlotThreshold1Urgent | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to urgent priority traffic from list 1 when free buffers in list 1 is less than this threshold. | ||||
| CalaQoSSlotThreshold2Low | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to low priority traffic from list 2 when free buffers in list 2 is less than this threshold. | ||||
| CalaQoSSlotThreshold2Medium | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to medium priority traffic from list 2 when free buffers in list 2 is less than this threshold. | ||||
| CalaQoSSlotThreshold2High | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to high priority traffic from list 2 when free buffers in list 2 is less than this threshold. | ||||
| CalaQoSSlotThreshold2Urgent | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Buffer are not given to urgent priority traffic from list 2 when free buffers in list 2 is less than this threshold. | ||||
| CalaQoSSlotBuffersDenied | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Buffers denied on this slot | ||||
| CalaQoSSlotBuffersDeniedAverage | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Average number of denied buffers over time | ||||
| CalaQoSSlotBuffersDropped | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current Buffers dropped on this slot | ||||
| CalaQoSSlotBuffersDroppedAverage | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current Average number of dropped buffers over time | ||||
| CalaQoSSlotWredThresholdP0Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.19 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 0 WRED lower threshold for high density module | ||||
| CalaQoSSlotWredThresholdP0Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.20 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 0 WRED upper threshold for high density module | ||||
| CalaQoSSlotWredThresholdP1Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.21 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 1 WRED lower threshold for high density module | ||||
| CalaQoSSlotWredThresholdP1Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.22 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 1 WRED upper threshold for high density module | ||||
| CalaQoSSlotWredThresholdP2Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.23 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 2 WRED lower threshold for high density module | ||||
| CalaQoSSlotWredThresholdP2Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.24 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 2 WRED upper threshold for high density module | ||||
| CalaQoSSlotWredThresholdP3Lower | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.25 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 3 WRED lower threshold for high density module | ||||
| CalaQoSSlotWredThresholdP3Upper | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.26 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 3 WRED upper threshold for high density module | ||||
| CalaQoSSlotWredAverageCounterWeight | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.27 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current The weight used in the WRED algorithm. It is used as a negative power of 2 | ||||
| CalaQoSSlotWredThresholdStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.28 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether WRED maximum thresholds are specified(enable) or not(disable).
| ||||
| CalaQoSSlotCbqThresholdMode | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.29 | INTEGER | RC | |
column · INTEGER · read-create · current Servicing mode for the CBQ thresholds for high density modules
| ||||
| CalaQoSSlotCbqThresholdP1 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.30 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 1 CBQ threshold for high density module | ||||
| CalaQoSSlotCbqThresholdP2 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.31 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 2 CBQ threshold for high density module | ||||
| CalaQoSSlotCbqThresholdP3 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.32 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current Priority 3 CBQ threshold for high density module | ||||
| CalaQoSSlotHighDensity | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether this is a high-density slice or not.
| ||||
| NalaQoSClassify | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34 | |||
| SalaQoSClassifyClassify | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Which classification routine to run on the sample packet
| ||||
| SalaQoSClassifyApplied | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current What set of policies QoS uses when testing the classifier. When yes(1) the applied policies are used. When no(2) the pending policies are used.
| ||||
| SalaQoSClassifySourceSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.3 | Integer32 (0..16) | RW | |
scalar · Integer32 (0..16) · read-write · current Source physical slot to submit when testing classifier. | ||||
| SalaQoSClassifySourcePort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.4 | Integer32 (0..52) | RW | |
scalar · Integer32 (0..52) · read-write · current Source physical port to submit when testing classifier. | ||||
| SalaQoSClassifySourceInterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Source interface type to submit when testing classifier.
| ||||
| SalaQoSClassifyDestinationSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.6 | Integer32 (0..16) | RW | |
scalar · Integer32 (0..16) · read-write · current Destination physical slot to submit when testing classifier. | ||||
| SalaQoSClassifyDestinationPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.7 | Integer32 (0..52) | RW | |
scalar · Integer32 (0..52) · read-write · current Destination physical port to submit when testing classifier. | ||||
| SalaQoSClassifyDestinationInterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Destination interface type to submit when testing classifier.
| ||||
| SalaQoSClassifySourceMac | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.9 | MacAddress | RW | |
scalar · MacAddress · read-write · current Source MAC address to submit when testing classifier. | ||||
| SalaQoSClassifyDestinationMac | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.10 | MacAddress | RW | |
scalar · MacAddress · read-write · current Destination MAC address to submit when testing classifier. | ||||
| SalaQoSClassifySourceVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.11 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Source VLAN to submit when testing classifier. | ||||
| SalaQoSClassifyDestinationVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.12 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Destination VLAN to submit when testing classifier. | ||||
| SalaQoSClassify8021p | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.13 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current 802.1p value to submit when testing classifier. | ||||
| SalaQoSClassifySourceIp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.14 | IpAddress | RW | |
scalar · IpAddress · read-write · current Source IP address to submit when testing classifier. | ||||
| SalaQoSClassifyDestinationIp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.15 | IpAddress | RW | |
scalar · IpAddress · read-write · current Destination IP address to submit when testing classifier. | ||||
| SalaQoSClassifyMulticastIp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.16 | IpAddress | RW | |
scalar · IpAddress · read-write · current Multicast IP address to submit when testing classifier. | ||||
| SalaQoSClassifyTos | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.17 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current TOS value to submit when testing classifier. | ||||
| SalaQoSClassifyDscp | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.18 | Integer32 (0..63) | RW | |
scalar · Integer32 (0..63) · read-write · current DSCP value to submit when testing classifier. | ||||
| SalaQoSClassifyIpProtocol | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.19 | Integer32 (0..255) | RW | |
scalar · Integer32 (0..255) · read-write · current IP protocol value to submit when testing classifier. | ||||
| SalaQoSClassifySourceIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.20 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Source IP port to submit when testing classifier. | ||||
| SalaQoSClassifyDestinationIpPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.21 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Destination IP port to submit when testing classifier. | ||||
| SalaQoSClassifyExecute | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Writing to this field tells QoS to run the classifier on the current packet headers. The classifier stores the results in result fields. The next 'set' to the table will clear all fields before actually performing the set.
| ||||
| SalaQoSClassifyL2SourceResultRule | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.23 | DisplayString (SIZE (0..31)) | RO | |
scalar · DisplayString (SIZE (0..31)) · read-only · current Matching rule for L2 (source) | ||||
| SalaQoSClassifyL2SourceResultDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.24 | INTEGER | RO | |
scalar · INTEGER · read-only · current Result disposition for L2 (source)
| ||||
| SalaQoSClassifyL2DestinationResultRule | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.25 | DisplayString (SIZE (0..31)) | RO | |
scalar · DisplayString (SIZE (0..31)) · read-only · current Matching rule for L2 (destination) | ||||
| SalaQoSClassifyL2DestinationResultDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.26 | INTEGER | RO | |
scalar · INTEGER · read-only · current Result disposition for L2 (destination)
| ||||
| SalaQoSClassifyL3ResultRule | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.27 | DisplayString (SIZE (0..31)) | RO | |
scalar · DisplayString (SIZE (0..31)) · read-only · current Matching rule for L3 | ||||
| SalaQoSClassifyL3ResultDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.28 | INTEGER | RO | |
scalar · INTEGER · read-only · current Result disposition for L3
| ||||
| SalaQoSClassifyIGMPResultRule | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.29 | DisplayString (SIZE (0..31)) | RO | |
scalar · DisplayString (SIZE (0..31)) · read-only · current Matching rule for IGMP request | ||||
| SalaQoSClassifyIGMPResultDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.30 | INTEGER | RO | |
scalar · INTEGER · read-only · current Result disposition for IGMP
| ||||
| SalaQoSClassifyMulticastResultRule | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.31 | DisplayString (SIZE (0..31)) | RO | |
scalar · DisplayString (SIZE (0..31)) · read-only · current Matching rule for multicast | ||||
| SalaQoSClassifyMulticastResultDisposition | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.32 | INTEGER | RO | |
scalar · INTEGER · read-only · current Result disposition for multicast
| ||||
| TalaQoSSlotProtocolTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35 | NA | ||
table · not-accessible · current Table of QoS SlotProtocol definitions | ||||
| RalaQoSSlotProtocolEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1 | NA | ||
row · not-accessible · current Definition of QoS SlotProtocol | ||||
| CalaQoSSlotProtocolId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Used on high density module classification in the MAC. This is the protocol ID used between the CAM and priority descriptors.
| ||||
| CalaQoSSlotProtocolEthertype | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.2 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Used on high density module classification in the MAC. This is the Ethernet type used between the CAM for classification. | ||||
| CalaQoSSlotProtocolDsap | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.3 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current Used on high density module classification in the MAC. This is the destination SAP in an 802.3 packet. | ||||
| CalaQoSSlotProtocolSsap | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.4 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current Used on high density module classification in the MAC. This is the source SAP in an 802.3 packet. | ||||
| CalaQoSSlotProtocol8023Enabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Used on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
| ||||
| CalaQoSSlotProtocolType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Used on high density module classification in the MAC. This positions the CAM entry in the list. Priority will put the entries in the front of the CAM, giving it priority. fallback will put the entry at the end.
| ||||
| CalaQoSSlotProtocolRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete slot protoocols according to the RowStatus convention | ||||
| TalaQoSPortProtocolTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36 | NA | ||
table · not-accessible · current Table of QoS PortProtocol definitions | ||||
| RalaQoSPortProtocolEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1 | NA | ||
row · not-accessible · current Definition of QoS PortProtocol | ||||
| CalaQoSPortProtocolId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Used on high density module classification in the MAC. This is the protocol id that needs to be changed.
| ||||
| CalaQoSPortProtocolClassification | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Used on high density module classification in the MAC. This determines what type of classification is used to find priority.
| ||||
| CalaQoSPortProtocolPriorityP0 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.3 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P0 to be mapped to. | ||||
| CalaQoSPortProtocolPriorityP1 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.4 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P1 to be mapped to. | ||||
| CalaQoSPortProtocolPriorityP2 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.5 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P2 to be mapped to. | ||||
| CalaQoSPortProtocolPriorityP3 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.6 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P3 to be mapped to. | ||||
| CalaQoSPortProtocolPriorityP4 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.7 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P4 to be mapped to. | ||||
| CalaQoSPortProtocolPriorityP5 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.8 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P5 to be mapped to. | ||||
| CalaQoSPortProtocolPriorityP6 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.9 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P6 to be mapped to. | ||||
| CalaQoSPortProtocolPriorityP7 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.10 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the new priority for P7 to be mapped to. | ||||
| CalaQoSPortProtocolRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete rows according to RowStatus convention | ||||
| TalaQoSSlotDscpTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37 | NA | ||
table · not-accessible · current Table of QoS SlotDscp definitions | ||||
| RalaQoSSlotDscpEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1 | NA | ||
row · not-accessible · current Definition of QoS SlotDscp | ||||
| CalaQoSSlotDscpIndex | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.1 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Used on high density module classification in the MAC This is the index into the DSCP table to access. | ||||
| CalaQoSSlotDscpPriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.2 | Integer32 (0..3) | RC | |
column · Integer32 (0..3) · read-create · current Used on high density module classification in the MAC. This is the priority of the index of the DSCP table. | ||||
| TalaQoSSlotPcamTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38 | NA | ||
table · not-accessible · current Table of QoS SlotPcam definitions | ||||
| RalaQoSSlotPcamEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1 | NA | ||
row · not-accessible · current Definition of QoS SlotPcam | ||||
| CalaQoSSlotPcamId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.1 | Integer32 (0..24) | NA | |
column · Integer32 (0..24) · not-accessible · current Used on high density module classification in the MAC. This is the index used in the PCAM. | ||||
| CalaQoSSlotPcamEthertype | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.2 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Used on high density module classification in the MAC. This is the Ethernet type in the CAM. | ||||
| CalaQoSSlotPcamDsap | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the destination SAP in an 802.3 packet. | ||||
| CalaQoSSlotPcamSsap | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.4 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the source SAP in an 802.3 packet. | ||||
| CalaQoSSlotPcam8023Enabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Used on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
| ||||
| CalaQoSSlotPcamProtocolNumber | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.6 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This identifies the protocol number of the CAM entry. | ||||
| CalaQoSSlotPcamEnableEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Used on high density module to enable the pcam entry.
| ||||
| CalaQoSSlotPcamEnable8023 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Used on high density module to indiciate if 802.3 is enabled in the pcam entry.
| ||||
| CalaQoSSlotPcamEnableDsap | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Used on high density module to indiciate if DSAP is enabled in the pcam entry.
| ||||
| CalaQoSSlotPcamEnableSsap | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Used on high density module to indiciate if SSAP is enabled in the pcam entry.
| ||||
| CalaQoSSlotPcamEnableEthertype | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Used on high density module to indiciate if Ethertype is enabled in the pcam entry.
| ||||
| TalaQoSPortPdiTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39 | NA | ||
table · not-accessible · current Table of QoS PortPdi definitions | ||||
| RalaQoSPortPdiEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1 | NA | ||
row · not-accessible · current Definition of QoS PortPdi | ||||
| CalaQoSPortPdiId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.1 | Integer32 (0..16) | NA | |
column · Integer32 (0..16) · not-accessible · current Used on high density module classification in the MAC. This is the index used in the PDI. | ||||
| CalaQoSPortPdiPriorityType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.2 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the classification type on the port. | ||||
| CalaQoSPortPdiPriorityP0 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P0 packet. | ||||
| CalaQoSPortPdiPriorityP1 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.4 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P1 packet. | ||||
| CalaQoSPortPdiPriorityP2 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.5 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P2 packet. | ||||
| CalaQoSPortPdiPriorityP3 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.6 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P3 packet. | ||||
| CalaQoSPortPdiPriorityP4 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P4 packet. | ||||
| CalaQoSPortPdiPriorityP5 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.8 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P5 packet. | ||||
| CalaQoSPortPdiPriorityP6 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.9 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P6 packet. | ||||
| CalaQoSPortPdiPriorityP7 | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.10 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Used on high density module classification in the MAC. This is the internal priority mapping for a P7 packet. | ||||
| TalaQoSValidityPeriodTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40 | NA | ||
table · not-accessible · current Table of QoS ValidityPeriod definitions | ||||
| RalaQoSValidityPeriodEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1 | NA | ||
| CalaQoSValidityPeriodName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of validity period | ||||
| CalaQoSValidityPeriodSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the validity period.
| ||||
| CalaQoSValidityPeriodDays | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant. | ||||
| CalaQoSValidityPeriodDaysStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the validity period has specific active days of the month.
| ||||
| CalaQoSValidityPeriodMonths | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant. | ||||
| CalaQoSValidityPeriodMonthsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the validity period has specific active days of the week.
| ||||
| CalaQoSValidityPeriodHour | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.7 | DisplayString (SIZE (0..7)) | RC | |
column · DisplayString (SIZE (0..7)) · read-create · current Time of day this period becomes active. Format is 'hh:mm' | ||||
| CalaQoSValidityPeriodHourStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the validity period has specific active hours of the day.
| ||||
| CalaQoSValidityPeriodEndHour | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.9 | DisplayString (SIZE (0..7)) | RC | |
column · DisplayString (SIZE (0..7)) · read-create · current Time of day this period becomes inactive. Format is 'hh:mm' | ||||
| CalaQoSValidityPeriodInterval | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.10 | DisplayString (SIZE (0..19)) | RC | |
column · DisplayString (SIZE (0..19)) · read-create · current Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm' | ||||
| CalaQoSValidityPeriodIntervalStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Status field indicating whether the validity period has a specific active date-time interval.
| ||||
| CalaQoSValidityPeriodEndInterval | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.12 | DisplayString (SIZE (0..19)) | RC | |
column · DisplayString (SIZE (0..19)) · read-create · current Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm' | ||||
| CalaQoSValidityPeriodRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete validity periods according to the RowStatus convention | ||||
| TalaQoSAppliedValidityPeriodTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41 | NA | ||
table · not-accessible · current Table of QoS AppliedValidityPeriod definitions | ||||
| RalaQoSAppliedValidityPeriodEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedValidityPeriod | ||||
| CalaQoSAppliedValidityPeriodName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of validity period | ||||
| CalaQoSAppliedValidityPeriodSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the validity period.
| ||||
| CalaQoSAppliedValidityPeriodDays | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant. | ||||
| CalaQoSAppliedValidityPeriodDaysStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the validity period has specific active days of the month.
| ||||
| CalaQoSAppliedValidityPeriodMonths | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant. | ||||
| CalaQoSAppliedValidityPeriodMonthsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the validity period has specific active days of the week.
| ||||
| CalaQoSAppliedValidityPeriodHour | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.7 | DisplayString (SIZE (0..7)) | RO | |
column · DisplayString (SIZE (0..7)) · read-only · current Time of day this period becomes active. Format is 'hh:mm' | ||||
| CalaQoSAppliedValidityPeriodHourStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the validity period has specific active hours of the day.
| ||||
| CalaQoSAppliedValidityPeriodEndHour | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.9 | DisplayString (SIZE (0..7)) | RO | |
column · DisplayString (SIZE (0..7)) · read-only · current Time of day this period becomes inactive. Format is 'hh:mm' | ||||
| CalaQoSAppliedValidityPeriodInterval | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.10 | DisplayString (SIZE (0..19)) | RO | |
column · DisplayString (SIZE (0..19)) · read-only · current Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm' | ||||
| CalaQoSAppliedValidityPeriodIntervalStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Status field indicating whether the validity period has a specific active date-time interval.
| ||||
| CalaQoSAppliedValidityPeriodEndInterval | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.12 | DisplayString (SIZE (0..19)) | RO | |
column · DisplayString (SIZE (0..19)) · read-only · current Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm' | ||||
| CalaQoSAppliedValidityPeriodRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.13 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete validity periods according to the RowStatus convention | ||||
| TalaQoSImportTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42 | NA | ||
table · not-accessible · current Table of QoS Import definitions | ||||
| RalaQoSImportEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1 | NA | ||
| CalaQoSImportIndex | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current Index of entry in import list | ||||
| CalaQoSImportText | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.2 | DisplayString (SIZE (0..63)) | NA | |
column · DisplayString (SIZE (0..63)) · not-accessible · current Text or filename to import | ||||
| CalaQoSImportPrecedence | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.3 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Precedence to use for policies imported from file | ||||
| CalaQoSImportPrefix | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.4 | DisplayString (SIZE (0..11)) | RC | |
column · DisplayString (SIZE (0..11)) · read-create · current Prefix for policy names that are imported | ||||
| CalaQoSImportSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.5 | Integer32 (0..52) | RC | |
column · Integer32 (0..52) · read-create · current Slot on which to apply imported policy(s) | ||||
| CalaQoSImportPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.6 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Starting port on which to apply imported policy(s) | ||||
| CalaQoSImportPortend | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.7 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Ending port on which to apply imported policy(s) | ||||
| CalaQoSImportPortgroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.8 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Portgroup on which to apply imported policy(s) | ||||
| CalaQoSImportRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete imports according to the RowStatus convention | ||||
| TalaQoSAppliedImportTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43 | NA | ||
table · not-accessible · current Table of QoS AppliedImport definitions | ||||
| RalaQoSAppliedImportEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedImport | ||||
| CalaQoSAppliedImportIndex | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current Index of entry in import list | ||||
| CalaQoSAppliedImportText | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.2 | DisplayString (SIZE (0..63)) | NA | |
column · DisplayString (SIZE (0..63)) · not-accessible · current Text or filename to import | ||||
| CalaQoSAppliedImportPrecedence | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Precedence to use for policies imported from file | ||||
| CalaQoSAppliedImportPrefix | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.4 | DisplayString (SIZE (0..11)) | RO | |
column · DisplayString (SIZE (0..11)) · read-only · current Prefix for policy names that are imported | ||||
| CalaQoSAppliedImportSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.5 | Integer32 (0..52) | RO | |
column · Integer32 (0..52) · read-only · current Slot on which to apply imported policy(s) | ||||
| CalaQoSAppliedImportPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.6 | Integer32 (0..16) | RO | |
column · Integer32 (0..16) · read-only · current Starting port on which to apply imported policy(s) | ||||
| CalaQoSAppliedImportPortend | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.7 | Integer32 (0..16) | RO | |
column · Integer32 (0..16) · read-only · current Ending port on which to apply imported policy(s) | ||||
| CalaQoSAppliedImportPortgroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.8 | DisplayString (SIZE (0..31)) | RO | |
column · DisplayString (SIZE (0..31)) · read-only · current Portgroup on which to apply imported policy(s) | ||||
| CalaQoSAppliedImportRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.9 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete imports according to the RowStatus convention | ||||
| TalaQoSRuleGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44 | NA | ||
table · not-accessible · current Table of QoS RuleGroups definitions | ||||
| RalaQoSRuleGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1 | NA | ||
| CalaQoSRuleGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of rule group | ||||
| CalaQoSRuleGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the rule group.
| ||||
| CalaQoSRuleGroupsType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Type of rule group.
| ||||
| CalaQoSRuleGroupsEnabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Is this rule grop enabled or not
| ||||
| CalaQoSRuleGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete rule groups according to the RowStatus convention | ||||
| TalaQoSAppliedRuleGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45 | NA | ||
table · not-accessible · current Table of QoS AppliedRuleGroups definitions | ||||
| RalaQoSAppliedRuleGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1 | NA | ||
| CalaQoSAppliedRuleGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of rule group | ||||
| CalaQoSAppliedRuleGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the service group.
| ||||
| CalaQoSAppliedRuleGroupsType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current What entity created the rule group.
| ||||
| CalaQoSAppliedRuleGroupsEnabled | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Is this rule grop enabled or not
| ||||
| CalaQoSAppliedRuleGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.5 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete rule groups according to the RowStatus convention | ||||
| TalaQoSRuleGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46 | NA | ||
table · not-accessible · current Table of QoS RuleGroup definitions | ||||
| RalaQoSRuleGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1 | NA | ||
row · not-accessible · current Definition of QoS RuleGroup | ||||
| CalaQoSRuleGroupRuleName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of rule in rule group entry | ||||
| CalaQoSRuleGroupMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times this rule has been matched. | ||||
| CalaQoSRuleGroupCountType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Which rule statistics counters to update if not all are available
| ||||
| CalaQoSRuleGroupPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSRuleGroupByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes matching this rule | ||||
| CalaQoSRuleGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete rule group entries according to the RowStatus convention | ||||
| CalaQoSRuleGroupPacketRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Packets mathcing the rule per second . | ||||
| CalaQoSRuleGroupBitRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Bytes mathcing the rule per second . | ||||
| CalaQoSRuleGroupAccPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets matching this rule | ||||
| CalaQoSRuleGroupAccByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes matching this rule | ||||
| TalaQoSAppliedRuleGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47 | NA | ||
table · not-accessible · current Table of QoS AppliedRuleGroup definitions | ||||
| RalaQoSAppliedRuleGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1 | NA | ||
row · not-accessible · current Definition of QoS AppliedRuleGroup | ||||
| CalaQoSAppliedRuleGroupRuleName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of rule in rule group entry | ||||
| CalaQoSAppliedRuleGroupMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times this rule has been matched. | ||||
| CalaQoSAppliedRuleGroupCountType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Which rule statistics counters to update if not all are available
| ||||
| CalaQoSAppliedRuleGroupPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets patching this rule | ||||
| CalaQoSAppliedRuleGroupByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes matching this rule | ||||
| CalaQoSAppliedRuleGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.6 | RowStatus | RO | |
column · RowStatus · read-only · current Used to create/delete rule group entries according to the RowStatus convention | ||||
| CalaQosAppliedRuleGroupPacketRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Shows the packet rate for policy list | ||||
| CalaQosAppliedRuleGroupBitRate | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Shows the bit rate for policy list | ||||
| CalaQoSAppliedRuleGroupAccPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets matching this rule | ||||
| CalaQoSAppliedRuleGroupAccByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes matching this rule | ||||
| TalaQoSVlanGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48 | NA | ||
table · not-accessible · current Table of QoS Vlan Groups definitions | ||||
| RalaQoSVlanGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1 | NA | ||
| CalaQoSVlanGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of Vlan group | ||||
| CalaQoSVlanGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the Vlan group.
| ||||
| CalaQoSVlanGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete Vlan groups according to the RowStatus convention | ||||
| TalaQoSAppliedVlanGroupsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49 | NA | ||
table · not-accessible · current Table of QoS Applied Vlan Groups definitions | ||||
| RalaQoSAppliedVlanGroupsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1 | NA | ||
| CalaQoSAppliedVlanGroupsName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.1 | DisplayString (SIZE (0..31)) | NA | |
column · DisplayString (SIZE (0..31)) · not-accessible · current Name of Applied Vlan group | ||||
| CalaQoSAppliedVlanGroupsSource | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current What entity created the Vlan group.
| ||||
| CalaQoSAppliedVlanGroupsStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete Vlan groups according to the RowStatus convention | ||||
| TalaQoSVlanGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50 | NA | ||
table · not-accessible · current Table of QoS Vlan Group definitions | ||||
| RalaQoSVlanGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1 | NA | ||
row · not-accessible · current Definition of QoS Vlan Group | ||||
| CalaQoSVlanGroupVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.1 | Integer32 (0..4095) | NA | |
column · Integer32 (0..4095) · not-accessible · current Vlan range start for vlan group entry | ||||
| CalaQoSVlanGroupVlanEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.2 | Integer32 (0..4095) | NA | |
column · Integer32 (0..4095) · not-accessible · current Vlan range end for vlan group entry | ||||
| CalaQoSVlanGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete vlan group entries according to the RowStatus convention | ||||
| TalaQoSAppliedVlanGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51 | NA | ||
table · not-accessible · current Table of QoS Applied Vlan Group definitions | ||||
| RalaQoSAppliedVlanGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1 | NA | ||
row · not-accessible · current Definition of QoS Applied Vlan Group | ||||
| CalaQoSAppliedVlanGroupVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.1 | Integer32 (0..4095) | NA | |
column · Integer32 (0..4095) · not-accessible · current Vlan range start for vlan group entry | ||||
| CalaQoSAppliedVlanGroupVlanEnd | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.2 | Integer32 (0..4095) | NA | |
column · Integer32 (0..4095) · not-accessible · current Vlan range end for vlan group entry | ||||
| CalaQoSAppliedVlanGroupStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete vlan group entries according to the RowStatus convention | ||||
| TalaQoSHwLoopbackProfileTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52 | NA | ||
table · not-accessible · current Table of QoS Hw Loopback Profiles | ||||
| RalaQoSHwLoopbackProfileEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1 | NA | ||
row · not-accessible · current Definition of QoS Hw Loopback Profiles | ||||
| CalaQoSHwLoopbackProfileName | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.1 | DisplayString (SIZE (1..31)) | NA | |
column · DisplayString (SIZE (1..31)) · not-accessible · current Name of Profile Name | ||||
| CalaQoSHwLoopbackSourceMac | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.2 | MacAddress | RC | |
column · MacAddress · read-create · current Source MAC address to use for Hardware Loopback profile configuration | ||||
| CalaQoSHwLoopbackDestinationMac | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current Destination MAC address to use for Hardware Loopback profile configuration | ||||
| CalaQoSHwLoopbackVlan | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.4 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current Vlan used in Hardware Loopback Profile Config | ||||
| CalaQoSHwLoopbackPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.5 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current Loopback Port ifindex used in Hardware Loopback Profile Config | ||||
| CalaQoSHwLoopbackType | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The type of Hardware Profile Config, inward and outward
| ||||
| CalaQoSHwLoopbackProfileStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The status of the Hardware Profile Config
| ||||
| CalaQoSHwLoopbackProfileRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Used to create/delete the Profile Config | ||||
| CalaQosHwLoopbackSapId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current A Number given to uniquely identify the SAP. | ||||
| TalaQoSQueueStatsTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53 | NA | ||
table · not-accessible · current Table of QoS Queue Stats definitions | ||||
| RalaQoSQueueStatsEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1 | NA | ||
| CalaQoSQueueStatsId | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current Internal queue identifier | ||||
| CalaQoSQueueStatsSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.2 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Physical slot queue is destined to | ||||
| CalaQoSQueueStatsPort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Physical port queue is destined to | ||||
| CalaQoSQueueStatsTransmitQueue | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.4 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current Transmit queue number | ||||
| CalaQoSQueueStatsPriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Transmit priority for the queue
| ||||
| CalaQoSQueueStatsPacketsSent | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets sent through the queue | ||||
| CalaQoSQueueStatsPacketsDropped | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets dropped trying to queue into this queue | ||||
| CalaQoSQueueStatsBytesSent | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Number of bytes sent through the queue | ||||
| CalaQoSQueueStatsBytesDropped | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Number of bytes dropped trying to queue into this queue | ||||
| CalaQoSQueueStatsRateSent | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Rate(Mbits/sec) sent through the queue | ||||
| CalaQoSQueueStatsRateDropped | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Rate(Mbits/sec) dropped trying to queue into this queue | ||||
| TalaQoSExtendedRuleTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54 | NA | ||
table · not-accessible · current Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis | ||||
| RalaQoSExtendedRuleEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1 | NA | ||
row · not-accessible · current Definition of QoS Rule | ||||
| CalaQoSExtendedRuleSlot | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Slot on which rate-limit is enabled. | ||||
| CalaQoSExtendedRulePort | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current Port on which rate-limit is enabled. | ||||
| CalaQoSExtendedRuleMatches | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times this rule has been matched. | ||||
| CalaQoSExtendedRulePacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets matching this rule | ||||
| CalaQoSExtendedRuleByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes matching this rule | ||||
| CalaQoSExtendedRuleExcessPacketCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for packets out of the bandwidth parameters | ||||
| CalaQoSExtendedRuleExcessByteCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for bytes out of the bandwidth parameters | ||||
| CalaQoSExtendedRuleGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets which are green compliant. | ||||
| CalaQoSExtendedRuleYellowCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets which are yellow compliant. | ||||
| CalaQoSExtendedRuleRedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets which are red compliant. | ||||
| CalaQoSExtendedRuleNonGreenCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets which are non-green compliant. | ||||
| CalaQoSExtendedRuleNonRedCount | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for the number of packets which are non-red compliant. | ||||
| TalaQoSDSCPTable | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55 | NA | ||
table · not-accessible · current Table of QoS Condition definitions | ||||
| RalaQoSDSCPEntry | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1 | NA | ||
| CalaQoSDSCPEntryNumber | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current DSCP Entry number for the traffic. | ||||
| CalaQoSDSCPPriority | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current DSCP priority for the traffic. | ||||
| CalaQoSDSCPDropPrecedence | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current DSCP drop precedence for the traffic.
| ||||
| CalaQoSDSCPRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus entry for QoS DSCP. | ||||
| NalaQoSMIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2 | |||
node · current Branch for QoS Managed Conformance Information. | ||||
| NalaQoSMIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1 | |||
node · current Branch for QoS Units of Conformance. | ||||
| GalaQoSMIBRuleObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.1 | |||
group · current Collections of objects providing information for Rules
| ||||
| GalaQoSMIBAppliedRuleObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.2 | |||
group · current Collections of objects providing information for applied Rules
| ||||
| GalaQoSMIBConditionObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.3 | |||
group · current Collections of objects providing information for Conditions
| ||||
| GalaQoSMIBAppliedConditionObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.4 | |||
group · current Collections of objects providing information for applied Conditions
| ||||
| GalaQoSMIBServiceObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.5 | |||
group · current Collections of objects providing information for Services
| ||||
| GalaQoSMIBAppliedServiceObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.6 | |||
group · current Collections of objects providing information for applied Services
| ||||
| GalaQoSMIBServiceGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.7 | |||
group · current Collections of objects providing information for ServiceGroupss | ||||
| GalaQoSMIBAppliedServiceGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.8 | |||
group · current Collections of objects providing information for applied ServiceGroupss | ||||
| GalaQoSMIBServiceGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.9 | |||
group · current Collections of objects providing information for ServiceGroups
| ||||
| GalaQoSMIBAppliedServiceGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.10 | |||
group · current Collections of objects providing information for applied ServiceGroups | ||||
| GalaQoSMIBNetworkGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.11 | |||
group · current Collections of objects providing information for NetworkGroupss | ||||
| GalaQoSMIBAppliedNetworkGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.12 | |||
group · current Collections of objects providing information for applied NetworkGroupss | ||||
| GalaQoSMIBNetworkGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.13 | |||
group · current Collections of objects providing information for NetworkGroups
| ||||
| GalaQoSMIBAppliedNetworkGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.14 | |||
group · current Collections of objects providing information for applied NetworkGroups | ||||
| GalaQoSMIBMACGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.15 | |||
group · current Collections of objects providing information for MACGroupss | ||||
| GalaQoSMIBAppliedMACGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.16 | |||
group · current Collections of objects providing information for applied MACGroupss | ||||
| GalaQoSMIBMACGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.17 | |||
group · current Collections of objects providing information for MACGroups
| ||||
| GalaQoSMIBAppliedMACGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.18 | |||
group · current Collections of objects providing information for applied MACGroups
| ||||
| GalaQoSMIBPortGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.19 | |||
group · current Collections of objects providing information for PortGroupss | ||||
| GalaQoSMIBAppliedPortGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.20 | |||
group · current Collections of objects providing information for applied PortGroupss | ||||
| GalaQoSMIBPortGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.21 | |||
group · current Collections of objects providing information for PortGroups
| ||||
| GalaQoSMIBAppliedPortGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.22 | |||
group · current Collections of objects providing information for applied PortGroups
| ||||
| GalaQoSMIBMapGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.23 | |||
group · current Collections of objects providing information for MapGroupss | ||||
| GalaQoSMIBAppliedMapGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.24 | |||
group · current Collections of objects providing information for applied MapGroupss | ||||
| GalaQoSMIBMapGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.25 | |||
group · current Collections of objects providing information for MapGroups
| ||||
| GalaQoSMIBAppliedMapGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.26 | |||
group · current Collections of objects providing information for applied MapGroups
| ||||
| GalaQoSMIBActionObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.27 | |||
group · current Collections of objects providing information for Actions
| ||||
| GalaQoSMIBAppliedActionObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.28 | |||
group · current Collections of objects providing information for applied Actions
| ||||
| GalaQoSMIBPortObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.29 | |||
group · current Collections of objects providing information for Ports
| ||||
| GalaQoSMIBConfigObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.30 | |||
group · current Collections of objects providing information for Configs
| ||||
| GalaQoSMIBStatsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.31 | |||
group · current Collections of objects providing information for Statss
| ||||
| GalaQoSMIBQueueObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.32 | |||
group · current Collections of objects providing information for Queues
| ||||
| GalaQoSMIBSlotObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.33 | |||
group · current Collections of objects providing information for Slots
| ||||
| GalaQoSMIBClassifyObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.34 | |||
group · current Collections of objects providing information for Classifys
| ||||
| GalaQoSMIBRuleGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.35 | |||
group · current Collections of objects providing information for RuleGroupss | ||||
| GalaQoSMIBAppliedRuleGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.36 | |||
group · current Collections of objects providing information for applied RuleGroupss | ||||
| GalaQoSMIBRuleGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.37 | |||
group · current Collections of objects providing information for RuleGroups | ||||
| GalaQoSMIBAppliedRuleGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.38 | |||
group · current Collections of objects providing information for applied RuleGroups
| ||||
| GalaQoSVlanGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.39 | |||
group · current Collections of objects providing QoS Vlan Groups definitions. | ||||
| GalaQoSAppliedVlanGroupsObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.40 | |||
group · current Collections of objects providing applied QoS Vlan Groups definitions. | ||||
| GalaQoSVlanGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.41 | |||
group · current Collections of objects providing QoS Vlan Groups definitions.
| ||||
| GalaQoSAppliedVlanGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.42 | |||
group · current Collections of objects providing applied QoS Vlan Groups definitions.
| ||||
| GalaQoSMIBHwLoopBackProfileObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.43 | |||
group · current Collections of objects providing information for Hardware Loopback | ||||
| GalQosQueueStatsGroupObjects | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.44 | |||
group · current Collection of objects providing statistics information for egress queues. | ||||
| GalaQoSAppliedImportGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.45 | |||
group · current Definition of QoS Applied Import. | ||||
| GalaQoSAppliedValidityPeriodGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.46 | |||
group · current Definition of QoS Applied Import.
| ||||
| GalaQoSImportGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.47 | |||
group · current Definition of QoS Import. | ||||
| GalaQoSPortPdiGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.48 | |||
group · current Definition of QoS PortPdi. | ||||
| GalaQoSPortPriorityGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.49 | |||
group · current Definition of QoS Port Priority. | ||||
| GalaQoSSlotDscpGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.50 | |||
| GalaQoSSlotPcamGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.51 | |||
group · current Definition of QoS SlotDscp. | ||||
| GalaQoSSlotProtocolGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.52 | |||
group · current Definition of QoS SlotDscp. | ||||
| GalaQoSValidityPeriodGroup | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.53 | |||
group · current Definition of QoS SlotDscp.
| ||||
| NalaQoSMIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.2 | |||
node · current Branch for QoS Compliance Statements. | ||||
| MalaQoSMIBCompliance | 1.3.6.1.4.1.6486.800.1.2.1.22.1.2.2.1 | |||
compliance · current Compliance statement for QoS.
| ||||
Groups and compliance
- alQosQueueStatsGroupObjects
- alaQoSAppliedImportGroup
- alaQoSAppliedValidityPeriodGroup
- alaQoSAppliedVlanGroupObjects
- alaQoSAppliedVlanGroupsObjects
- alaQoSImportGroup
- alaQoSMIBActionObjects
- alaQoSMIBAppliedActionObjects
- alaQoSMIBAppliedConditionObjects
- alaQoSMIBAppliedMACGroupObjects
- alaQoSMIBAppliedMACGroupsObjects
- alaQoSMIBAppliedMapGroupObjects
- alaQoSMIBAppliedMapGroupsObjects
- alaQoSMIBAppliedNetworkGroupObjects
- alaQoSMIBAppliedNetworkGroupsObjects
- alaQoSMIBAppliedPortGroupObjects
- alaQoSMIBAppliedPortGroupsObjects
- alaQoSMIBAppliedRuleGroupObjects
- alaQoSMIBAppliedRuleGroupsObjects
- alaQoSMIBAppliedRuleObjects
- alaQoSMIBAppliedServiceGroupObjects
- alaQoSMIBAppliedServiceGroupsObjects
- alaQoSMIBAppliedServiceObjects
- alaQoSMIBClassifyObjects
- alaQoSMIBCompliance
- alaQoSMIBConditionObjects
- alaQoSMIBConfigObjects
- alaQoSMIBHwLoopBackProfileObjects
- alaQoSMIBMACGroupObjects
- alaQoSMIBMACGroupsObjects
- alaQoSMIBMapGroupObjects
- alaQoSMIBMapGroupsObjects
- alaQoSMIBNetworkGroupObjects
- alaQoSMIBNetworkGroupsObjects
- alaQoSMIBPortGroupObjects
- alaQoSMIBPortGroupsObjects
- alaQoSMIBPortObjects
- alaQoSMIBQueueObjects
- alaQoSMIBRuleGroupObjects
- alaQoSMIBRuleGroupsObjects
- alaQoSMIBRuleObjects
- alaQoSMIBServiceGroupObjects
- alaQoSMIBServiceGroupsObjects
- alaQoSMIBServiceObjects
- alaQoSMIBSlotObjects
- alaQoSMIBStatsObjects
- alaQoSPortPdiGroup
- alaQoSPortPriorityGroup
- alaQoSSlotDscpGroup
- alaQoSSlotPcamGroup
- alaQoSSlotProtocolGroup
- alaQoSValidityPeriodGroup
- alaQoSVlanGroupObjects
- alaQoSVlanGroupsObjects