ALCATEL-IND1-PORT-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This group contains the configuration information data
for the Ethernet Switching Module.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-PORT-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-PORT-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.5.1Imports
| ALCATEL-IND1-BASE | cmmEsmDrvTraps, softentIND1Port |
|---|---|
| IF-MIB | InterfaceIndex, ifInErrors, ifIndex, ifOutErrors |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp |
OID tree
| Name | OID | Type | Access | Status | Example |
|---|---|---|---|---|---|
| IalcatelIND1PortMIB | 1.3.6.1.4.1.6486.800.1.2.1.5.1 | ||||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This group contains the configuration information data
for the Ethernet Switching Module.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | |||||
| NalcatelIND1PortNotifications | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0 | ||||
| NddmNotifications | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1 | ||||
| !ddmTemperatureThresholdViolated | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.1 | ||||
notification · current This object notifies management station if an SFP/XFP/SFP+ temperature has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ temperature.
| |||||
| !ddmVoltageThresholdViolated | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.2 | ||||
notification · current This object notifies management station if an SFP/XFP/SFP+ supply voltage has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ supply voltage.
| |||||
| !ddmCurrentThresholdViolated | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.3 | ||||
notification · current This object notifies management station if an SFP/XFP/SFP+ Tx bias current has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx bias current.
| |||||
| !ddmTxPowerThresholdViolated | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.4 | ||||
notification · current This object notifies management station if an SFP/XFP/SFP+ Tx output power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Tx output power.
| |||||
| !ddmRxPowerThresholdViolated | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.5 | ||||
notification · current This object notifies management station if an SFP/XFP/SFP+ Rx optical power has crossed any threshold or reverted from previous threshold violation for a port represented by ifIndex. It also provides the current realtime value of SFP/XFP/SFP+ Rx optical power.
| |||||
| NesmViolationNotifications | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.2 | ||||
| !esmViolationRecoveryTimeout | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.2.0.1 | ||||
notification · current This object notifies management station if User-Port ports get re-enabled after esm violation recovery time | |||||
| !alaEsmKite2eDBChange | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.3 | ||||
notification · current When SFP+ daughter module is inserted in place of CX4 stacking module or vice versa, then this notification is sent to Management Entity. Please note that if the old module and new module, defined by EsmDBType, are same, then this trap will not be sent. | |||||
| !esmPortViolation | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.4 | ||||
notification · current This object notifies management station whenever an interface is shut down by a feature due to violation.
| |||||
| !alaDBChange | 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.5 | ||||
notification · current When there is a change in the expansion module presence, then this notification is sent to Management Entity. Please note that if the old module and new module, defined by AlaDBType, are same, then this trap will not be sent.
| |||||
| NalcatelIND1PortMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1 | ||||
| NesmConfTrap | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1 | ||||
| SesmDrvTrapDrops | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.1 | Integer32 | RO | ||
scalar · Integer32 · read-only · current Partitioned port (separated due to errors). | |||||
| SalaDyingGaspSlot | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.2 | Integer32 | AN | ||
scalar · Integer32 · accessible-for-notify · current This object specifies the slot number of the chassis whose NI is going down. | |||||
| SalaDyingGaspPowerSupplyType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.3 | INTEGER | AN | ||
scalar · INTEGER · accessible-for-notify · current This object specifies the type of the power supply.
| |||||
| SalaDyingGaspTime | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.4 | DateAndTime | AN | ||
scalar · DateAndTime · accessible-for-notify · current This object specifies the time of power failure. | |||||
| SesmPortViolationValue | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.5 | INTEGER | AN | ||
scalar · INTEGER · accessible-for-notify · current This object contains the mapping of esmPortViolation bitmap to an integeral value.
| |||||
| SesmStormViolationThresholdNotificationType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.6 | INTEGER | AN | ||
scalar · INTEGER · accessible-for-notify · current This type defines the trap genrated by storm control feature for high or low threshold.
| |||||
| SesmStormViolationThresholdTrafficType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.7 | INTEGER | AN | ||
scalar · INTEGER · accessible-for-notify · current This type defines the traffic for which the trap genrated by storm control feature for high or low threshold.
| |||||
| NphysicalPort | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2 | ||||
| TesmConfTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1 | NA | |||
table · not-accessible · current A list of ESM Physical Port instances. | |||||
| ResmConfEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1 | NA | |||
| CesmPortSlot | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.1 | Integer32 | RO | ||
column · Integer32 · read-only · current The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap. | |||||
| CesmPortIF | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.2 | Integer32 | RO | ||
column · Integer32 · read-only · current The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap. | |||||
| CesmPortAutoSpeed | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.3 | INTEGER | RO | ||
column · INTEGER · read-only · current The automatically detected port line speed of this ESM port.
| |||||
| CesmPortAutoDuplexMode | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.4 | INTEGER | RO | ||
column · INTEGER · read-only · current The automatically detected port duplex mode
of this ESM port.
Note: GigaEthernet supports only Full duplex mode.
Default value for 10/100 = Half duplex mode.
| |||||
| CesmPortCfgSpeed | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.5 | INTEGER | RW | ||
column · INTEGER · read-write · current The configured port line speed of this ESM port.
| |||||
| CesmPortCfgDuplexMode | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.6 | INTEGER | RW | ||
column · INTEGER · read-write · current The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
| |||||
| CesmPortCfgIFG | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.7 | Integer32 | RW | ||
column · Integer32 · read-write · current Contains the setting of Inter-Frame Gap (IFG), in bytes
for receive and transmit.
The range is from 9 to 12 bytes.
Note: The default value changed according to the Port type
Default Bandwidth value
12 bytes 10Mbps 9600 nsec
100Mbps 960 nsec
1Gbps 96 nsec
10Gbps 9.6 nsec. | |||||
| CesmPortPauseSlotTime | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.8 | Integer32 | RW | ||
column · Integer32 · read-write · current Indicates the number of microseconds the other
end-station waits after the reception
of a pause frame.
Note: Pause Flow control is not available for 10Mbps.
For 100Mbps, the possible value range is
5120 nanosec to 0.3 sec.
For 1Gbps, the possible value range is
512 nanosec to 0.03 sec. | |||||
| CesmPortMaxFloodRate | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.9 | INTEGER | RW | ||
column · INTEGER · read-write · current Broadcast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also.
The default value for flood rate is:
1. 4 mbps if the port speed is 10 mbps,
2. 49 mbps if the port speed is 100 mbps
3. 496 mbps if the port speed is 1G
4. 997 mbps if the port speed is 10G
| |||||
| CesmPortFloodMcastEnable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.10 | INTEGER | RW | ||
column · INTEGER · read-write · current Enable/disable the maximum flood rate for multicast.
| |||||
| CesmPortCfgMaxFrameSize | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.11 | Integer32 | RW | ||
column · Integer32 · read-write · current Configure the value of the maximum frame
size allow.
For 10/100:
It is a range between 1518(untagged) and 1553 bytes.
For GigaEthernet:
It is a range between 1518 and 10240 bytes.(OS7700,OS7800,OS8800)
It is a range between 1518 and 9216 bytes.(OS6800) | |||||
| CesmPortCfgLongEnable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.12 | INTEGER | RW | ||
column · INTEGER · read-write · current Allow the user to change the maximun Frame size. Note: It is not configurable for 10/100 Ethernet port.
| |||||
| CesmPortCfgRuntEnable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.13 | INTEGER | RW | ||
column · INTEGER · read-write · current Allow the user to change the minimum Frame size.
| |||||
| CesmPortCfgRuntSize | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.14 | Integer32 | RW | ||
column · Integer32 · read-write · current Configure the value of the minimum frame
size allow per ports.
The range is 0 to 64. | |||||
| CesmPortCfgAutoNegotiation | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.15 | INTEGER | RW | ||
column · INTEGER · read-write · current Allow the user to enable or disable the port auto negotiation.
| |||||
| CesmPortCfgCrossover | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.16 | INTEGER | RW | ||
column · INTEGER · read-write · current Allow the user to configure port crossover.
| |||||
| CesmPortCfgFlow | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.17 | INTEGER | RW | ||
column · INTEGER · read-write · current Use the dot3PauseAdminMode from the standard MIB to configure the flow control.
| |||||
| CesmPortCfgHybridActiveType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.18 | INTEGER | RO | ||
column · INTEGER · read-only · current This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be different if esmPortCfgHybridMode is configured to be preferredFiber or preferredCopper) For non hybrid ports notapplicable is returned as a status.
| |||||
| CesmPortCfgHybridMode | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.19 | INTEGER | RW | ||
column · INTEGER · read-write · current This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port should come up. The user can configure the port to come as copper only or fiber only or either fiber/copper (with preference to one of them).
| |||||
| CesmPortOperationalHybridType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.20 | INTEGER | RO | ||
column · INTEGER · read-only · current This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing traffic. If link is not present the object will return none(0) value.
| |||||
| CesmPortCfgMMULowWaterMarkCellSetLimit | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.21 | INTEGER (0..16383) | RW | ||
column · INTEGER (0..16383) · read-write · current Per-port-per-CoS Head of Line blocking cell limits. Range is 0 - 16383 Firebolt register Offset: 0x006pp30 - 0x37 Bits: 13:0 CellSetLimit , Default: 0x0100 This setting allocates the guaranteed cells for one port's CoSx queue. After cell count over this limit, it will start using dynamic cells in port dynamic space. | |||||
| CesmPortCfgMMUDynamicCellSetLimit | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.22 | INTEGER (0..16383) | RW | ||
column · INTEGER (0..16383) · read-write · current Per-egress port cell-based dynamic (shared buffer pool) memory
usage drop and resume thresholds. This sets the limit for which
the eight CoS-Qs within a port may share once the LWMCOSCELL
limit is exceeded. Range is 0 - 16383
Firebolt register Offset: 0x006pp040
Bits: 13:0 Dynamic CellSetLimit ,
Chip Default: 0x0400 (1024).
The system default value for Dynamic CellSetLimit is 0x100 (256). | |||||
| CesmPortViolationBitMap | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.23 | Bits | RO | ||
column · Bits · read-only · current A bit map that identifies the set of Application that have blocked a port as a result of a particular violation
| |||||
| CesmPortViolationClearAll | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.24 | INTEGER (0) | RW | ||
column · INTEGER (0) · read-write · current Clear all port vioaltion | |||||
| CesmPortFloodBcastEnable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.25 | INTEGER | RW | ||
column · INTEGER · read-write · current Enable/disable the maximum flood rate for Broadcast.
| |||||
| CesmPortFloodUnknownUcastEnable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.26 | INTEGER | RW | ||
column · INTEGER · read-write · current Enable/disable the maximum flood rate for unknown unicast.
| |||||
| CesmPortMaxUnknownUcastFloodRate | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.27 | INTEGER | RW | ||
column · INTEGER · read-write · current Unknown-Unicast flood threshold type. To set the type, set esmPortMaxUnknownUcastFloodRateLimit also.
The default value for flood rate is:
1. 4 mbps if the port speed is 10 mbps,
2. 49 mbps if the port speed is 100 mbps
3. 496 mbps if the port speed is 1G
4. 997 mbps if the port speed is 10G
| |||||
| CesmPortMaxMcastFloodRate | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.28 | INTEGER | RW | ||
column · INTEGER · read-write · current Multicast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also. The default value for flood rate is: 1. 4 mbps if the port speed is 10 mbps, 2. 49 mbps if the port speed is 100 mbps 3. 496 mbps if the port speed is 1G 4. 997 mbps if the port speed is 10G
| |||||
| CesmPortMaxFloodRateLimit | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.29 | Integer32 | RW | ||
column · Integer32 · read-write · current The value of the maximum broadcast flood limit. The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G speed) PPS: 244 - 244262 (1G speed) To set the limit, set esmPortMaxFloodRate first | |||||
| CesmPortMaxUnknownUcastFloodRateLimit | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.30 | Integer32 | RW | ||
column · Integer32 · read-write · current The value of the maximum unknown-unicast flood limit The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G speed) PPS: 244 - 244262 (1G speed) To set the limit, set esmPortMaxUnknownUcastFloodRate first | |||||
| CesmPortMaxMcastFloodRateLimit | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.31 | Integer32 | RW | ||
column · Integer32 · read-write · current The value of the maximum multicast flood limit The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G speed) PPS: 244 - 244262 (1G speed) To set the limit, set esmPortMaxMcastFloodRate first | |||||
| CesmPortCfgSFPType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.32 | DisplayString (SIZE (0..64)) | RO | ||
column · DisplayString (SIZE (0..64)) · read-only · current This object is only applicable to fiber ports. The string indicates the type of SFP/GBIC of active media. | |||||
| CesmPortWaitToRestoreTimer | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.33 | Integer32 (0..300) | RW | ||
column · Integer32 (0..300) · read-write · current Indicates the number of seconds after which the link up event is notified to other applications. The timer is started whenever a Link Up is detected on a port being monitored. | |||||
| CesmPortMinFloodRateLimit | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.34 | Integer32 | RW | ||
column · Integer32 · read-write · current The value of the minimum broadcast flood limit this value should be same type as that of the maximum value configured for broadcast traffic. | |||||
| CesmPortMinMcastFloodRateLimit | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.35 | Integer32 | RW | ||
column · Integer32 · read-write · current The value of the minimum multicast flood limit this value should be same type as that of the maximum value configured for multicast traffic. | |||||
| CesmPortFloodThresholdAction | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.36 | INTEGER | RW | ||
column · INTEGER · read-write · current The action to be taken when the broadcast traffic exceeding the maximum configured value.
| |||||
| CesmPortMcastThresholdAction | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.37 | INTEGER | RW | ||
column · INTEGER · read-write · current The action to be taken when the multicast traffic exceeding the maximum configured value.
| |||||
| CesmPortFlood | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.38 | INTEGER | RO | ||
column · INTEGER · read-only · current The state of the port, is it having normal or stormed broad cast traffic.
| |||||
| CesmPortMCastStorm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.39 | INTEGER | RO | ||
column · INTEGER · read-only · current The state of the port, is it having normal or stormed mulit cast traffic.
| |||||
| CesmPortCfgEeeStatus | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.40 | INTEGER | RW | ||
column · INTEGER · read-write · current Allow the user to enable or disable the port EEE mode.
| |||||
| CesmPortCfgEeeAutoNegState | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.41 | INTEGER | RO | ||
column · INTEGER · read-only · current Current autoneg state of EEE enabled port.
| |||||
| CesmPortCfgEeeCapability | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.42 | INTEGER | RO | ||
column · INTEGER · read-only · current Current cpapbility of EEE enabled port.
| |||||
| TalcetherStatsTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2 | NA | |||
table · not-accessible · current A list of Ethernet statistics entries. | |||||
| RalcetherStatsEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1 | NA | |||
row · not-accessible · current A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named alcetherStatsPkts.1
| |||||
| CalcetherClearStats | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.1 | INTEGER | RW | ||
column · INTEGER · read-write · current Used to Clear all Statistics counters. By default, this object contains zero value.
| |||||
| CalcetherLastClearStats | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.2 | TimeTicks | RO | ||
column · TimeTicks · read-only · current The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value. | |||||
| CalcetherStatsCRCAlignErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.3 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | |||||
| CalcetherStatsRxUndersizePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.4 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||
| CalcetherStatsTxUndersizePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.5 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||
| CalcetherStatsTxOversizePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.6 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||
| CalcetherStatsRxJabbers | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.7 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms. | |||||
| CalcetherStatsRxCollisions | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.8 | Counter64 | RO | ||
column · Counter64 · read-only · current The best estimate of the total number of collisions
on this Ethernet segment (in reception).
Only for Ethernet Interfaces.
The value returned will depend on the location of
the RMON probe. Section 8.2.1.3 (10BASE-5) and
section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
states that a station must detect a collision, in
the receive mode, if three or more stations are
transmitting simultaneously. A repeater port must
detect a collision when two or more stations are
transmitting simultaneously. Thus a probe placed on
a repeater port could record more collisions than a
probe connected to a station on the same segment
would.
Probe location plays a much smaller role when
considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
standard 802.3 defines a collision as the
simultaneous presence of signals on the DO and RD
circuits (transmitting and receiving at the same
time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes
placed on a station and a repeater, should report
the same number of collisions.
Note also that an RMON probe inside a repeater
should ideally report collisions between the
repeater and one or more other hosts (transmit
collisions as defined by IEEE 802.3k) plus receiver
collisions observed on any coax segments to which
the repeater is connected. | |||||
| CalcetherStatsTxCollisions | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.9 | Counter64 | RO | ||
column · Counter64 · read-only · current The best estimate of the total number of collisions
on this Ethernet segment (in transmition).
Only for Ethernet Interfaces.
The value returned will depend on the location of
the RMON probe. Section 8.2.1.3 (10BASE-5) and
section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
states that a station must detect a collision, in
the receive mode, if three or more stations are
transmitting simultaneously. A repeater port must
detect a collision when two or more stations are
transmitting simultaneously. Thus a probe placed on
a repeater port could record more collisions than a
probe connected to a station on the same segment
would.
Probe location plays a much smaller role when
considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
standard 802.3 defines a collision as the
simultaneous presence of signals on the DO and RD
circuits (transmitting and receiving at the same
time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes
placed on a station and a repeater, should report
the same number of collisions.
Note also that an RMON probe inside a repeater
should ideally report collisions between the
repeater and one or more other hosts (transmit
collisions as defined by IEEE 802.3k) plus receiver
collisions observed on any coax segments to which
the repeater is connected. | |||||
| CalcetherStatsPkts64Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.10 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). | |||||
| CalcetherStatsPkts65to127Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.11 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | |||||
| CalcetherStatsPkts128to255Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.12 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | |||||
| CalcetherStatsPkts256to511Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.13 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | |||||
| CalcetherStatsPkts512to1023Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.14 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | |||||
| CalcetherStatsPkts1024to1518Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.15 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).
For both Ethernet and GigaEthernet. | |||||
| CgigaEtherStatsPkts1519to4095Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.16 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad
packets) received that were between
1519 and 4095 octets in length inclusive
(excluding framing bits but including FCS octets).
Only for GigaEthernet interfaces | |||||
| CgigaEtherStatsPkts4096to9215Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.17 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets (including bad
packets) received that were between
4096 and 9215 octets in length inclusive
(excluding framing bits but including FCS octets).
Only for GigaEthernet interfaces | |||||
| CalcetherStatsPkts1519to2047Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.18 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames(including error packets) received that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsPkts2048to4095Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.19 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames(including error packets) received that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsPkts4096Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.20 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames(including error packets) received that were greater than or equal to 4096 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsRxGiantPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.21 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames that are greater than the specified Max length value, with a valid CRC, dropped because too long. | |||||
| CalcetherStatsRxDribbleNibblePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.22 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames for which a dribble nibble has been received and CRC is correct. | |||||
| CalcetherStatsRxLongEventPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.23 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames for which the Carrier sense exceeds 50000 bit times for 10 Mbits/sec or 80000 bit times for 100 Mbits/sec. | |||||
| CalcetherStatsRxVlanTagPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.24 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames for which Type/Length field contains the VLAN protocol identifier (0x8100). | |||||
| CalcetherStatsRxControlPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.25 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames that were recognized as control frames. | |||||
| CalcetherStatsRxLenChkErrPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.26 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a type field. | |||||
| CalcetherStatsRxCodeErrPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.27 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames for which one or more nibbles were signaled as errors during reception of the frame. | |||||
| CalcetherStatsRxDvEventPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.28 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames for which a RX_DV event (packet not too long enough to be valid packet) has been seen before the correct frame. | |||||
| CalcetherStatsRxPrevPktDropped | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.29 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames for which a packet has been dropped (because of too small IFG) before the correct frame. | |||||
| CalcetherStatsTx64Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.30 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames of 64 bytes. | |||||
| CalcetherStatsTx65to127Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.31 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTx128to255Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.32 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTx256to511Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.33 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTx512to1023Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.34 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTx1024to1518Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.35 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTx1519to2047Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.36 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTx2048to4095Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.37 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTx4096Octets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.38 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were greater than or equal to 4096 bytes in length and less than Max frame length (excluding framing bits but including FCS bytes). | |||||
| CalcetherStatsTxRetryCount | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.39 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of collisions that the frames faced during transmission attempts. | |||||
| CalcetherStatsTxVlanTagPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.40 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames for which Type/Length field contains the VLAN protocol identifier (0x8100). | |||||
| CalcetherStatsTxControlPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.41 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames that were recognised as control frames. | |||||
| CalcetherStatsTxLatePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.42 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of late collisions that occured beyond the collision window. | |||||
| CalcetherStatsTxTotalBytesOnWire | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.43 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of bytes transmitted on wire, including all bytes from collided attempts. | |||||
| CalcetherStatsTxLenChkErrPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.44 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of transmitted frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a Type field. | |||||
| CalcetherStatsTxExcDeferPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.45 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of frames that were deferred in excess of 6071 nibble-times in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This stat is only in case of Half duplex and excessive defer bit reset). | |||||
| TesmHybridConfTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3 | NA | |||
table · not-accessible · current A list of inactive hybrid port instances. | |||||
| ResmHybridConfEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1 | NA | |||
| CesmHybridPortCfgSpeed | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.1 | INTEGER | RW | ||
column · INTEGER · read-write · current The configured port line speed of this ESM port.
| |||||
| CesmHybridPortCfgDuplexMode | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.2 | INTEGER | RW | ||
column · INTEGER · read-write · current The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex.
| |||||
| CesmHybridPortCfgAutoNegotiation | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.3 | INTEGER | RW | ||
column · INTEGER · read-write · current Allow the user to enable or disable the port auto negotiation.
| |||||
| CesmHybridPortCfgCrossover | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.4 | INTEGER | RW | ||
column · INTEGER · read-write · current Allow the user to configure port crossover.
| |||||
| CesmHybridPortCfgFlow | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.5 | INTEGER | RW | ||
column · INTEGER · read-write · current This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode object in dot3PauseTable. It is used to configure pause for fiber media.
| |||||
| CesmHybridPortCfgInactiveType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.6 | INTEGER | RO | ||
column · INTEGER · read-only · current This object is only applicable to hybrid ports . It indicates the configured inactive media type.
| |||||
| CesmHybridPortCfgSFPType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.7 | DisplayString (SIZE (0..64)) | RO | ||
column · DisplayString (SIZE (0..64)) · read-only · current This object is only applicable to fiber ports. The string indicates the type of SFP/GBIC of active media. | |||||
| Talcether10GigTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4 | NA | |||
table · not-accessible · current A list of 10 Gig specifics entries. | |||||
| Ralcether10GigEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4.1 | NA | |||
row · not-accessible · current This table will be populated with the 10 gig only entries. The management interface can use it to specify if A or B is the primary.
| |||||
| Calcether10GigPrimary | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4.1.1 | INTEGER | RW | ||
column · INTEGER · read-write · current Setting the object to 1 will make phy A as primary, 2- phy B as pirmary. Value 3 should not be set.
| |||||
| TddmInfoTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5 | NA | |||
table · not-accessible · current The ddmInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components. | |||||
| RddmInfoEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1 | NA | |||
row · not-accessible · current Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
| |||||
| CddmTemperature | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.1 | Integer32 (-200000 | -150000..150000) | RO | 40000 | |
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTemperature indicates the current temperature
of the SFP/XFP in 1000s of degrees Celsius.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTempLowWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.2 | Integer32 (-200000 | -150000..150000) | RO | -40000 | |
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempLowWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTempLowAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.3 | Integer32 (-200000 | -150000..150000) | RO | -45000 | |
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempLowAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTempHiWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.4 | Integer32 (-200000 | -150000..150000) | RO | 85000 | |
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempHiWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTempHiAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.5 | Integer32 (-200000 | -150000..150000) | RO | 95000 | |
column · Integer32 (-200000 | -150000..150000) · read-only · current The value of ddmTempHiAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmSupplyVoltage | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.6 | Integer32 (-200000 | 0..10000) | RO | 3345 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltage indicates the current supply
voltage of the SFP/XFP in 1000s of Volts (V).
A value of -200000 indicates this object is not applicable.
| |||||
| CddmSupplyVoltageLowWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.7 | Integer32 (-200000 | 0..10000) | RO | 3000 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmSupplyVoltageLowAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.8 | Integer32 (-200000 | 0..10000) | RO | 2900 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmSupplyVoltageHiWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.9 | Integer32 (-200000 | 0..10000) | RO | 3500 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmSupplyVoltageHiAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.10 | Integer32 (-200000 | 0..10000) | RO | 3600 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxBiasCurrent | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.11 | Integer32 (-200000 | 0..10000) | RO | 26400 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA).
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxBiasCurrentLowWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.12 | Integer32 (-200000 | 0..10000) | RO | 5000 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxBiasCurrentLowAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.13 | Integer32 (-200000 | 0..10000) | RO | 2000 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxBiasCurrentHiWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.14 | Integer32 (-200000 | 0..10000) | RO | 80000 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxBiasCurrentHiAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.15 | Integer32 (-200000 | 0..10000) | RO | 90000 | |
column · Integer32 (-200000 | 0..10000) · read-only · current The value of ddmTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxOutputPower | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.16 | Integer32 (-200000 | -40000..10000) | RO | -2441 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPower indicates the current Output
Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxOutputPowerLowWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.17 | Integer32 (-200000 | -40000..10000) | RO | -9200 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxOutputPowerLowAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.18 | Integer32 (-200000 | -40000..10000) | RO | -10204 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxOutputPowerHiWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.19 | Integer32 (-200000 | -40000..10000) | RO | 1499 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmTxOutputPowerHiAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.20 | Integer32 (-200000 | -40000..10000) | RO | 2499 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmRxOpticalPower | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.21 | Integer32 (-200000 | -40000..10000) | RO | -6788 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmRxOpticalPowerLowWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.22 | Integer32 (-200000 | -40000..10000) | RO | -15003 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmRxOpticalPowerLowAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.23 | Integer32 (-200000 | -40000..10000) | RO | -16003 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmRxOpticalPowerHiWarning | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.24 | Integer32 (-200000 | -40000..10000) | RO | -1000 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
| |||||
| CddmRxOpticalPowerHiAlarm | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.25 | Integer32 (-200000 | -40000..10000) | RO | 0 | |
column · Integer32 (-200000 | -40000..10000) · read-only · current The value of ddmRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
| |||||
| TesmPortModeTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6 | NA | |||
table · not-accessible · current A list of ESM Physical Port Mode instances. | |||||
| ResmPortModeEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1 | NA | |||
| CesmPortModeIndex | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.1 | INTEGER (1001..8128) | NA | ||
column · INTEGER (1001..8128) · not-accessible · current Valid ni/port values | |||||
| CesmPortRunningMode | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.2 | INTEGER | RO | ||
column · INTEGER · read-only · current Currently configured Etna port 25,26 as 10G uplink user port or stacking port. Default is uplink 10G port. User can not set the current mode.
| |||||
| CesmPortSavedMode | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.3 | INTEGER | RW | ||
column · INTEGER · read-write · current Next configured Etna port 25,26 as 10G uplink user port or stacking port. At boot up, it has the same value as current esmPortRunningMode. It takes some time to write to the EEPROM. Have at least more than 7 sec between each write operation
| |||||
| TesmTdrPortTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7 | NA | |||
table · not-accessible · current The table lists the results of cable diagnostics. | |||||
| ResmTdrPortEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1 | NA | |||
| CesmTdrPortCableState | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.1 | INTEGER | RO | ||
column · INTEGER · read-only · current State of a cable as returned by the TDR test.
| |||||
| CesmTdrPortValidPairs | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.2 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of pairs in the cable for which the results of this test are valid. | |||||
| CesmTdrPortPair1State | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.3 | INTEGER | RO | ||
column · INTEGER · read-only · current The state for pair-1 of the cable as returned by the TDR test.
| |||||
| CesmTdrPortPair1Length | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.4 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The length for pair-1 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||
| CesmTdrPortPair2State | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.5 | INTEGER | RO | ||
column · INTEGER · read-only · current The state for pair-2 of the cable as returned by the TDR test.
| |||||
| CesmTdrPortPair2Length | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.6 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The length for pair-2 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||
| CesmTdrPortPair3State | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.7 | INTEGER | RO | ||
column · INTEGER · read-only · current The state for pair-3 of the cable as returned by the TDR test.
| |||||
| CesmTdrPortPair3Length | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.8 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The length for pair-3 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||
| CesmTdrPortPair4State | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.9 | INTEGER | RO | ||
column · INTEGER · read-only · current The state for pair-4 of the cable as returned by the TDR test.
| |||||
| CesmTdrPortPair4Length | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.10 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The length for pair-4 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. | |||||
| CesmTdrPortFuzzLength | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.11 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The error in the estimated length of the cable (as returned by TDR test). | |||||
| CesmTdrPortTest | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.12 | INTEGER | RW | ||
column · INTEGER · read-write · current Object used to start a TDR test or EXTENDED test on the port. When configured as on, it initiates a TDR test on the port. When configured as extendedOn, it initiates a EXTENDED test on the port. A read operation on this object always returns the value off.
| |||||
| CesmTdrClearStats | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.13 | INTEGER | RW | ||
column · INTEGER · read-write · current Used to Clear TDR stats or EXTENDED stats. By default, this object contains zero value.
| |||||
| CesmTdrResult | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.14 | INTEGER | RO | ||
column · INTEGER · read-only · current Used to give the status of API,whether API able to execute TDR test successfully or failed to executethe TDR test.
| |||||
| CesmTdrPortExtSwapTypeChannel1 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.15 | INTEGER | RO | ||
column · INTEGER · read-only · current Determines the channel associated with the MDI pair(cross or not for each two MDI pairs)
| |||||
| CesmTdrPortExtSwapTypeChannel2 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.16 | INTEGER | RO | ||
column · INTEGER · read-only · current Determines the channel associated with the MDI pair(cross or not for each two MDI pairs)
| |||||
| CesmTdrPortExtPolaritySwapPair1 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.17 | INTEGER | RO | ||
column · INTEGER · read-only · current Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
| |||||
| CesmTdrPortExtPolaritySwapPair2 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.18 | INTEGER | RO | ||
column · INTEGER · read-only · current Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
| |||||
| CesmTdrPortExtPolaritySwapPair3 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.19 | INTEGER | RO | ||
column · INTEGER · read-only · current Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
| |||||
| CesmTdrPortExtPolaritySwapPair4 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.20 | INTEGER | RO | ||
column · INTEGER · read-only · current Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
| |||||
| CesmTdrPortExtSkewPair1 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.21 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Skew among the four pairs of cable(delay between pairs, in n-Seconds) | |||||
| CesmTdrPortExtSkewPair2 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.22 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Skew among the four pairs of cable(delay between pairs, in n-Seconds) | |||||
| CesmTdrPortExtSkewPair3 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.23 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Skew among the four pairs of cable(delay between pairs, in n-Seconds) | |||||
| CesmTdrPortExtSkewPair4 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.24 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Skew among the four pairs of cable(delay between pairs, in n-Seconds) | |||||
| CesmTdrPortExtAccurateCableLenPair1 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.25 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Length of the cable in meters | |||||
| CesmTdrPortExtAccurateCableLenPair2 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.26 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Length of the cable in meters | |||||
| CesmTdrPortExtAccurateCableLenPair3 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.27 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Length of the cable in meters | |||||
| CesmTdrPortExtAccurateCableLenPair4 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.28 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Length of the cable in meters | |||||
| CesmTdrPortExtDownshiftStatus | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.29 | INTEGER | RO | ||
column · INTEGER · read-only · current list downshift status of the port
| |||||
| CesmTdrExtResult | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.30 | INTEGER | RO | ||
column · INTEGER · read-only · current Used to give the status of API,whether API able to execute TDR Extended test successfully or failed to execute the TDR Extended test.
| |||||
| CesmTdrCableLen | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.31 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The Approximate Length of a normal cable(Non-Faulty) | |||||
| CesmTdrPhyType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.32 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current Lists the Marvell types | |||||
| TalaLinkMonConfigTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8 | NA | |||
table · not-accessible · current A list of Link Monitoring Configuration Parameters | |||||
| RalaLinkMonConfigEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1 | NA | |||
row · not-accessible · current A collection of Link Monitoring configurations kept for a particular Ethernet interface.
| |||||
| CalaLinkMonStatus | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.1 | INTEGER | RW | ||
column · INTEGER · read-write · current Allows the user to enable or disable Link Monitoring on the port.
| |||||
| CalaLinkMonTimeWindow | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.2 | Integer32 (0..3600) | RW | ||
column · Integer32 (0..3600) · read-write · current Indicates the number of seconds the Link will be monitored for a port. | |||||
| CalaLinkMonLinkFlapThreshold | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.3 | Integer32 (2..10) | RW | ||
column · Integer32 (2..10) · read-write · current Indicaes the number of link flaps allowed for the specified port during the time window before the port is shutdown. | |||||
| CalaLinkMonLinkErrorThreshold | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.4 | Integer32 (1..100) | RW | ||
column · Integer32 (1..100) · read-write · current Indicates the number of link errors allowed on Rx for the specified port during the time window before the port is shutdown. The errors are the MAC errors that include CRC, lost frames, error frames, alignment frames. | |||||
| TalaLinkMonStatsTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9 | NA | |||
table · not-accessible · current A list of Link Monitoring Statistics | |||||
| RalaLinkMonStatsEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1 | NA | |||
row · not-accessible · current A collection of Link Monitoring statistics for a particular Ethernet interface.
| |||||
| CalaLinkMonStatsClearStats | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.1 | INTEGER | RW | ||
column · INTEGER · read-write · current Used to Clear all Statistics counters. The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port. By default, this object contains zero value.
| |||||
| CalaLinkMonStatsPortState | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.2 | INTEGER | RO | ||
column · INTEGER · read-only · current Indicates the status of the port. up(1) means the port is physically up, down(2) means the port is physically down, shutdown(3) means the interface is shutdown because of excessive link flaps or link errors.
| |||||
| CalaLinkMonStatsCurrentLinkFlaps | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.3 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the number of Link flaps in the current time window. | |||||
| CalaLinkMonStatsCurrentErrorFrames | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.4 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the number of error frames in the current time window. | |||||
| CalaLinkMonStatsCurrentCRCErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.5 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the number of CRC errors in the current time window. | |||||
| CalaLinkMonStatsCurrentLostFrames | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.6 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the number of Rx Lost frames in the current time window. | |||||
| CalaLinkMonStatsCurrentAlignErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.7 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the number of Rx alignment frames in the current time window. | |||||
| CalaLinkMonStatsCurrentLinkErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.8 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the sum of all the MAC Errors within the current time window. i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, alaLinkMonCurrentLosFrames, alaLinkMonStatsCurrentAlignErrors. | |||||
| CalaLinkMonStatsTotalLinkFlaps | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.9 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the total number of link flaps across all the time windows. | |||||
| CalaLinkMonStatsTotalLinkErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.10 | Counter64 | RO | ||
column · Counter64 · read-only · current Indicates the total number of link errors across all the time windows. | |||||
| TalaLFPGroupTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10 | NA | |||
table · not-accessible · current A list of Link Fault Propagation Grooups and their status | |||||
| RalaLFPGroupEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1 | NA | |||
row · not-accessible · current The list of Link Fault Propagation group id and status for each group
| |||||
| CalaLFPGroupId | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.1 | Integer32 (1..8) | AN | ||
column · Integer32 (1..8) · accessible-for-notify · current Indicates the unique group id for Link Fault Propagation (LFP). | |||||
| CalaLFPGroupAdminStatus | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.2 | INTEGER | RC | ||
column · INTEGER · read-create · current Indicates the admin status of the group. disable(0) means link fault propagation, is disbaled. enable(1) means link fault propagation is enabled
| |||||
| CalaLFPGroupOperStatus | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.3 | INTEGER | RO | ||
column · INTEGER · read-only · current Indicates the operational status of the group. down(0) means all the source ports are down, up(1) means atleast one source port in the group is up.
| |||||
| CalaLFPGroupWaitToShutdown | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.4 | Integer32 (0..300) | RC | ||
column · Integer32 (0..300) · read-create · current 0 - Disable wait to shutdown timer Range 5 - 300, in multiples of 5. After expiry of this timer all destination ports will be shutdown | |||||
| CalaLFPGroupRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.5 | RowStatus | RC | ||
column · RowStatus · read-create · current Row Status for initiating a MIB retrieval request. | |||||
| TalaLFPConfigTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11 | NA | |||
table · not-accessible · current A list of Link Fault Propagation port and port type of each LFP group | |||||
| RalaLFPConfigEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1 | NA | |||
row · not-accessible · current A list of Link Fault Propagation port and port type of each LFP group | |||||
| CalaLFPConfigPort | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.1 | InterfaceIndex | AN | ||
column · InterfaceIndex · accessible-for-notify · current Indicates ifindex of source/destination port for a LFP Group. | |||||
| CalaLFPConfigPortType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.2 | INTEGER | RC | ||
column · INTEGER · read-create · current Indicates the type of port, (1) means the port is destination port and (2) means the port is a source port for a LFP Group.
| |||||
| CalaLFPConfigRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.3 | RowStatus | RC | ||
column · RowStatus · read-create · current Row Status for initiating a MIB retrieval request. | |||||
| TesmSlotInfoTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12 | NA | |||
table · not-accessible · current ESM Slot information table. | |||||
| ResmSlotInfoEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1 | NA | |||
| CesmSlotNumber | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1.1 | INTEGER | RO | ||
column · INTEGER · read-only · current The slot number on stack. | |||||
| CesmNumberOfUserPorts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1.2 | INTEGER | RO | ||
column · INTEGER · read-only · current The number of user ports on specified slot number. | |||||
| TesmPtpStatsTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13 | NA | |||
table · not-accessible · current The table lists the Statistics params of PTP. | |||||
| ResmPtpStatsEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1 | NA | |||
| CesmPtpStatsIngPtpv2 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.1 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP V2 packets ingress in to the port | |||||
| CesmPtpStatsIngPtpv1 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.2 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP V1 packets ingress in to the port | |||||
| CesmPtpStatsIngPtpDrop | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.3 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP packets dropped at ingress by the port | |||||
| CesmPtpStatsIngPtpPigBag | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.4 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP Piggy Bag added to ingress packets in the port | |||||
| CesmPtpStatsEgrPtpv2 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.5 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP V2 packets egress from the port | |||||
| CesmPtpStatsEgrPtpv1 | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.6 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP V1 packets egress from the port | |||||
| CesmPtpStatsEgrPtpDrop | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.7 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP packets dropped at egress by the port | |||||
| CesmPtpStatsEgrPtpUpdateRes | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.8 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current The number of PTP residence time updated packets in the port | |||||
| TesmStackPortTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14 | NA | |||
table · not-accessible · current A list of Stacking Link statistics | |||||
| ResmStackPortConfEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1 | NA | |||
row · not-accessible · current A collection of statistics kept for a Stacking Link.
| |||||
| CesmStackPortIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.1 | InterfaceIndex | RO | ||
column · InterfaceIndex · read-only · current A unique value, greater than zero, for each stack port interface. | |||||
| CesmStackPortSlotNum | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.2 | Integer32 | RO | ||
column · Integer32 · read-only · current The on-board slot number of stack ports. | |||||
| CesmStackPortInOctets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.3 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of octets received on the stacking interface, including framing characters. | |||||
| CesmStackPortOutOctets | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.4 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of octets transmitted out of the stacking interface, including framing characters. | |||||
| CesmStackPortInUcastPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.5 | Counter64 | RO | ||
column · Counter64 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. | |||||
| CesmStackPortOutUcastPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.6 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. | |||||
| CesmStackPortInMulticastPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.7 | Counter64 | RO | ||
column · Counter64 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. | |||||
| CesmStackPortOutMulticastPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.8 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. | |||||
| CesmStackPortInBroadcastPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.9 | Counter64 | RO | ||
column · Counter64 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. | |||||
| CesmStackPortOutBroadcastPkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.10 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. | |||||
| CesmStackPortInPauseFrames | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.11 | Counter64 | RO | ||
column · Counter64 · read-only · current A count of MAC Control frames received on stacking interface with an opcode indicating the PAUSE operation. | |||||
| CesmStackPortOutPauseFrames | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.12 | Counter64 | RO | ||
column · Counter64 · read-only · current A count of MAC Control frames transmitted on stacking interface with an opcode indicating the PAUSE operation. | |||||
| CesmStackPortStatsAlignmentErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.13 | Counter64 | RO | ||
column · Counter64 · read-only · current A count of frames received on the stacking interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. This counter does not increment for 8-bit wide group encoding schemes. | |||||
| CesmStackPortStatsFCSErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.14 | Counter64 | RO | ||
column · Counter64 · read-only · current A count of frames received on the stacking interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Note: Coding errors detected by the physical layer for speeds above 10 Mb/s will cause the frame to fail the FCS check. | |||||
| CesmStackPortInErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.15 | Counter64 | RO | ||
column · Counter64 · read-only · current For a stacking interface, the number of inbound packets that
contained errors preventing them from being deliverable
to a higher-layer protocol. For character-oriented or
fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol. | |||||
| CesmStackPortOutErrors | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.16 | Counter64 | RO | ||
column · Counter64 · read-only · current For a stacking interface, the number of outbound packets
that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors. | |||||
| CesmStackPortInDiscards | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.17 | Counter64 | RO | ||
column · Counter64 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | |||||
| CesmStackPortOutDiscards | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.18 | Counter64 | RO | ||
column · Counter64 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | |||||
| CesmStackPortTxCollisions | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.19 | Counter64 | RO | ||
column · Counter64 · read-only · current The estimate of the total number of collisions. | |||||
| CesmStackPortRxUndersizePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.20 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||
| CesmStackPortTxUndersizePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.21 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||
| CesmStackPortRxOversizePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.22 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets received that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||
| CesmStackPortTxOversizePkts | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.23 | Counter64 | RO | ||
column · Counter64 · read-only · current The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | |||||
| CesmStackPortAutoSpeed | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.24 | INTEGER | RO | ||
column · INTEGER · read-only · current The automatically detected port line speed of the stack port.
| |||||
| CesmStackPortClearStats | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.25 | INTEGER | RW | ||
column · INTEGER · read-write · current Used to Clear all Stack Port Statistics counters. By default, this object contains zero value.
| |||||
| NddmConfiguration | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4 | ||||
| SddmConfig | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4.1 | INTEGER | RW | ||
scalar · INTEGER · read-write · current This object enables/disables DDM software feature in the system.
| |||||
| SddmTrapConfig | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4.2 | INTEGER | RW | ||
scalar · INTEGER · read-write · current This objects enables/disables traps for DDM warning/alarm threshold violations.
| |||||
| SddmNotificationType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4.3 | INTEGER | AN | ||
scalar · INTEGER · accessible-for-notify · current This object defines the trap type for monitored DDM parameters.
| |||||
| NesmViolationRecovery | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5 | ||||
| SesmViolationRecoveryTrap | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.1 | INTEGER | RW | ||
scalar · INTEGER · read-write · current This objects enables/disables traps for user-port shutdown
| |||||
| SesmViolationRecoveryTime | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.2 | Integer32 (0..600) | RW | ||
scalar · Integer32 (0..600) · read-write · current 0 - Disable the timer 30 - 600 - timeout value to re-enable the UserPort ports | |||||
| SesmViolationRecoveryNotificationType | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.3 | INTEGER | AN | ||
scalar · INTEGER · accessible-for-notify · current This object defines the trap type for monitored violation-recovery parameters.
| |||||
| SesmViolationRecoveryMaximum | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.4 | Integer32 (0..50) | RW | ||
scalar · Integer32 (0..50) · read-write · current 0 - recovery mechanism is disabled 1 - 50 - The maximum number of recovery attempts before a port is shudown. | |||||
| TalaPortViolationRecoveryTable | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5 | NA | |||
table · not-accessible · current A list of Interface Violation Recovery Configuration Parameters | |||||
| RalaPortViolationRecoveryEntry | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1 | NA | |||
row · not-accessible · current A collection of Interface Violation Recovery configurations kept for a particular Ethernet interface.
| |||||
| CalaPortViolationRecoveryTime | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1.1 | Integer32 (-1..600) | RW | ||
column · Integer32 (-1..600) · read-write · current -1 - value in scalar object esmViolationRecoveryTime 0 - Disable the timer 30 - 600 - timeout value to re-enable the ports that have been shutdown | |||||
| CalaPortViolationRecoveryMaximum | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1.2 | Integer32 (-1..50) | RW | ||
column · Integer32 (-1..50) · read-write · current -1 - value in scalar object esmViolationRecoveryMaximum 0 - recovery mechanism is disabled 1 - 50 - The maximum number of recovery attempts before a port is shudown. | |||||
| NesmDBChangeRebootReqdMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6 | ||||
| SalaEsmOldDb | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6.1 | EsmDBType | AN | ||
scalar · EsmDBType · accessible-for-notify · current This object specifies the module, either SFP+ daughter module or CX4 stacking module, which was present before inserting a new module (either CX4 or SFP+). | |||||
| SalaEsmNewDb | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6.2 | EsmDBType | AN | ||
scalar · EsmDBType · accessible-for-notify · current This object specifies the module, either SFP+ daughter module or CX4 stacking module, which has been inserted. | |||||
| SalaEsmModuleChangeString | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6.3 | SnmpAdminString (SIZE (1..128)) | AN | ||
scalar · SnmpAdminString (SIZE (1..128)) · accessible-for-notify · current This object specifies the string value describing reboot is required to activate the new module. | |||||
| NesmStormThresholdViolation | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.7 | ||||
| NalaDBChangeMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8 | ||||
| SalaOldDb | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8.1 | AlaDBType | AN | ||
scalar · AlaDBType · accessible-for-notify · current This object specifies the daughter module, which was present before inserting a new module. | |||||
| SalaNewDb | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8.2 | AlaDBType | AN | ||
scalar · AlaDBType · accessible-for-notify · current This object specifies the daughter module, which has been inserted. | |||||
| SalaModuleChangeString | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8.3 | SnmpAdminString (SIZE (1..128)) | AN | ||
scalar · SnmpAdminString (SIZE (1..128)) · accessible-for-notify · current This object specifies the string value describing 1) reboot is required to activate the new module. 2) New module can be used without reboot 3) No expansion module is present. | |||||
| NptpConfiguration | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.9 | ||||
| SptpConfig | 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.9.1 | INTEGER | RW | ||
scalar · INTEGER · read-write · current This object enables/disables PTP software feature in the system.
| |||||
| NalcatelIND1PortMIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2 | ||||
| NalcatelIND1PortMIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1 | ||||
| MesmConfPortCompliance | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1.1 | ||||
compliance · current The compliance statement for the configuration of Ethernet ports.
| |||||
| MalcEtherStatsCompliance | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1.2 | ||||
compliance · current The compliance statement for the Statistics of the Ethernet ports. | |||||
| MesmSlotInfoCompliance | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1.3 | ||||
compliance · current The compliance statement for the esm per slot information.
| |||||
| NalcatelIND1PortMIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2 | ||||
| GesmConfMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.1 | ||||
group · current A collection of objects to support the management of global configuration parameters of the Ethernet ports.
| |||||
| GesmDetectedConfMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.2 | ||||
group · current A collection of objects to support the Detected configuration parameters of the Ethernet ports. | |||||
| GalcEtherStatsMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.3 | ||||
group · current A collection of objects to provide all the statistics related to the Ethernet and GigaEthernert ports.
| |||||
| GalcPortNotificationGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.4 | ||||
| GesmPortModeMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.5 | ||||
group · current A collection of objects to support the management of global configuration parameters of the stacking ports.
| |||||
| GddmInfoGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.6 | ||||
group · current A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s.
| |||||
| GddmConfigGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.7 | ||||
group · current A collection of objects to allow configuration of DDM and DDM traps.
| |||||
| GddmNotificationsGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.8 | ||||
group · current A collection of notifications used to indicate DDM threshold violations. | |||||
| GviolationRecoveryGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.9 | ||||
group · current A collection of objects to allow configuration of violationRecovery. | |||||
| GviolationNotificationsGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.10 | ||||
group · current A collection of notifications used to indicate esm violation recovery timeout.
| |||||
| GalaDyingGaspNotificationGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.11 | ||||
group · current A collection of notifications used to indicate dying gasp trap.
| |||||
| GesmTdrGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.12 | ||||
group · current A collection of objects to provide TDR information
| |||||
| GalaEsmDBObjGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.13 | ||||
group · current A collection of objects to provide DB change trap information. | |||||
| GalsEsmDBChangeNotificationGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.14 | ||||
group · current A collection of notifications used to indicate DB change trap.
| |||||
| GalaLinkMonConfigMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.15 | ||||
group · current A collection of objects to support the Link Monitoring Configurations on the ports. | |||||
| GalaLinkMonStatsMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.16 | ||||
group · current A collection of objects to provide all the statistics related to the Link Monitoring on the ports.
| |||||
| GalaLFPGroupMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.17 | ||||
group · current A collection of objects to configure Link Fault Propagation Group, Wait to shutdown timer and admin staus of group. | |||||
| GalaLFPConfigMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.18 | ||||
group · current A collection of objects to configure a port and port type for a Link Fault Propagation Group. | |||||
| GalaPortViolationRecoveryMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.19 | ||||
group · current The per port configuration Parameters for Interface Violation Recovery Mechanism | |||||
| GesmSlotInfoGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.20 | ||||
group · current A collection of objects to provide number of user port information per slot basis.
| |||||
| GesmConfTrapGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.21 | ||||
group · current Specifies the BD type. | |||||
| Galcether10GigGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.22 | ||||
| GesmHybridConfGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.23 | ||||
group · current | |||||
| GesmPortViolationNotificationGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.24 | ||||
group · current A collection of notifications used to indicate port violation trap.
| |||||
| GesmDrvDyingGaspNotificationGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.25 | ||||
group · current A collection of notifications used to indicate dying gasp trap.
| |||||
| GesmStormThresholdViolationGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.26 | ||||
group · current A collection of notifications used to indicate esm storm threshold violation. | |||||
| GesmStackPortConfMIBGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.28 | ||||
group · current A collection of objects to support the management of global configuration parameters of the stack ports.
| |||||
| GptpConfigGroup | 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.29 | ||||
| !esmDrvTrapDropsLink | 1.3.6.1.4.1.6486.800.1.3.2.6.0.1 | ||||
notification · current When the Ethernet code drops the link because of excessive errors, a Trap is sent.
| |||||
| !alaDyingGaspTrap | 1.3.6.1.4.1.6486.800.1.3.2.6.0.3 | ||||
notification · current Dying Gasp trap. | |||||
| !esmStormThresholdViolationStatus | 1.3.6.1.4.1.6486.800.1.3.2.6.0.4 | ||||
notification · current This object notifies management station if User-Port ports gets the ingress traffic inflow above the configured value. | |||||
Textual conventions
AlaDBTypeINTEGERkf2HDMIStackingDB(2)kf2RJ45DB(3)kf2SfpDB(4)kf2SfpPlusDB(1)none(0)Specifies the DB type.
EsmDBTypeINTEGERcx4StackingModule(2)sfpPlusDaughterModule(1)Specifies the BD type.
Traps / Notifications
- alaDBChange
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.5 - alaDyingGaspTrap
1.3.6.1.4.1.6486.800.1.3.2.6.0.3 - alaEsmKite2eDBChange
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.3 - ddmCurrentThresholdViolated
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.3 - ddmRxPowerThresholdViolated
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.5 - ddmTemperatureThresholdViolated
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.1 - ddmTxPowerThresholdViolated
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.4 - ddmVoltageThresholdViolated
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.2 - esmDrvTrapDropsLink
1.3.6.1.4.1.6486.800.1.3.2.6.0.1 - esmPortViolation
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.4 - esmStormThresholdViolationStatus
1.3.6.1.4.1.6486.800.1.3.2.6.0.4 - esmViolationRecoveryTimeout
1.3.6.1.4.1.6486.800.1.2.1.5.1.0.2.0.1
Groups and compliance
- alaDyingGaspNotificationGroup
- alaEsmDBObjGroup
- alaLFPConfigMIBGroup
- alaLFPGroupMIBGroup
- alaLinkMonConfigMIBGroup
- alaLinkMonStatsMIBGroup
- alaPortViolationRecoveryMIBGroup
- alcEtherStatsCompliance
- alcEtherStatsMIBGroup
- alcPortNotificationGroup
- alcether10GigGroup
- alsEsmDBChangeNotificationGroup
- ddmConfigGroup
- ddmInfoGroup
- ddmNotificationsGroup
- esmConfMIBGroup
- esmConfPortCompliance
- esmConfTrapGroup
- esmDetectedConfMIBGroup
- esmDrvDyingGaspNotificationGroup
- esmHybridConfGroup
- esmPortModeMIBGroup
- esmPortViolationNotificationGroup
- esmSlotInfoCompliance
- esmSlotInfoGroup
- esmStackPortConfMIBGroup
- esmStormThresholdViolationGroup
- esmTdrGroup
- ptpConfigGroup
- violationNotificationsGroup
- violationRecoveryGroup