ALCATEL-IND1-IPV6-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary IPv6 MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-IPV6-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-IPV6-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.29.1Imports
| ALCATEL-IND1-BASE | softentIND1Ipv6 |
|---|---|
| IF-MIB | InterfaceIndex |
| IPV6-MIB | ipv6IfIndex, ipv6RouteEntry |
| IPV6-TC | Ipv6Address, Ipv6IfIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1IPv6MIB | 1.3.6.1.4.1.6486.800.1.2.1.29.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary IPv6 MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1IPv6MIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1 | |||
| NalaIPv6Config | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1 | |||
| SalaIPv6ClearNeighbors | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear all non-static entries from the Neighbor table.
| ||||
| SalaIPv6ClearTraffic | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Reset all IPv6 traffic counters.
| ||||
| SalaIPv6ClearPMTUTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Clear the path MTU table.
| ||||
| SalaIPv6PMTUMinLifetime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1.4 | Unsigned32 (10..1440) | RW | |
scalar · Unsigned32 (10..1440) · read-write · current Set the minimum lifetime for entries in the path MTU table.
| ||||
| SalaIPv6NeighborStaleLifetime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1.5 | Unsigned32 (5..2880) | RW | |
scalar · Unsigned32 (5..2880) · read-write · current Set the minimum lifetime for neighbor entries in the stale state.
| ||||
| SalaIPv6GlobalID | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1.6 | OCTET STRING (SIZE (5)) | RW | |
scalar · OCTET STRING (SIZE (5)) · read-write · current The global ID used in the creation of local IPv6 unicast addresses (RFC 4193). An explicit value may be specified for the global ID or this object may be set to all zero to have a global ID be created based on the algorithm from the RFC. | ||||
| SalaIPv6ClearRafCounters | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Reset all IPv6 Raf counters.
| ||||
| TalaIPv6InterfaceTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2 | NA | ||
table · not-accessible · current Table allowing the creation and removal of IPv6
interfaces.
The table is indexed by ipv6IfIndex. The value of
ipv6IfIndex shall be a four byte value in one of
the following formats:
0x0000vvvv - The interface for VLAN vvvv
0x0100tttt - The interface for tunnel tttt
0x02000001 - The IPv6 loopback interface
The loopback interface configuration cannot be
modified. | ||||
| RalaIPv6InterfaceEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1 | NA | ||
| CalaIPv6InterfaceRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Used to control the addition and removal of IPv6 interfaces. | ||||
| CalaIPv6InterfaceDescription | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.2 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current The IPv6 interface's description. | ||||
| CalaIPv6InterfaceMtu | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The IPv6 interface's maximum transmission unit. | ||||
| CalaIPv6InterfaceType | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The interface type.
| ||||
| CalaIPv6InterfaceAdminStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Interface administrative status.
| ||||
| CalaIPv6InterfaceSendRouterAdvertisements | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Specify whether the router sends periodic router
advertisements and responds to router solicitations
on the interface.
The default value for most interfaces is enable(1).
Some interface types (e.g. 6to4 tunnel) cannot send
router advertisements so the default (and only)
value for those interfaces is disable(2).
| ||||
| CalaIPv6InterfaceMaxRtrAdvInterval | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.7 | Unsigned32 (4..1800) | RC | |
column · Unsigned32 (4..1800) · read-create · current The maximum time allowed between sending unsolicited multicast router advertisements from the interface.
| ||||
| CalaIPv6InterfaceAdvManagedFlag | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current The TRUE/FALSE value to be placed in the 'Managed address configuration' flag field in router advertisements. | ||||
| CalaIPv6InterfaceAdvOtherConfigFlag | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current The TRUE/FALSE value to be placed in the 'Other stateful configuration' flag field in router advertisements. | ||||
| CalaIPv6InterfaceAdvReachableTime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.10 | Unsigned32 (0..3600000) | RC | |
column · Unsigned32 (0..3600000) · read-create · current The value to be placed in the Reachable Time field in the router advertisements sent over this interface. The value zero means unspecified by this router.
| ||||
| CalaIPv6InterfaceAdvRetransTimer | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.11 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value to be placed in the Retrans Timer field in the router advertisements sent over this interface. The value zero means unspecified by this router.
| ||||
| CalaIPv6InterfaceAdvDefaultLifetime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.12 | Unsigned32 (0..9000) | RC | |
column · Unsigned32 (0..9000) · read-create · current The value to be placed in the Router Lifetime field in the router advertisements sent over this interface. The value MUST be either zero, 1, or between alaIPv6InterfaceMaxRtrAdvInterval and 9000 seconds. The special value zero indicates that the router is not to be used as a default router. The special value 1 indicates that this object's true value should be computed using the formula 3 * alaIPv6InterfaceMaxRtrAdvInterval.
| ||||
| CalaIPv6InterfaceName | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.13 | DisplayString (SIZE (1..20)) | RC | |
column · DisplayString (SIZE (1..20)) · read-create · current The mandatory user-assigned name for the interface. Since the loopback interface is created without user interaction, the name 'loopback' will be automatically assigned. | ||||
| CalaIPv6InterfaceAdvSendMtu | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current The TRUE/FALSE value that determines whether the MTU option is sent in Router Advertisements. | ||||
| CalaIPv6InterfaceReachableTime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current In the absence of any reachability notification, the amount of time a neighbor reached via this interface will remain in the reachable state before transitioning to the stale state. Computed to be between .5 and 1.5 times the alaIPv6InterfaceBaseReachableTime.
| ||||
| CalaIPv6InterfaceBaseReachableTime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.16 | Unsigned32 (10..3600) | RC | |
column · Unsigned32 (10..3600) · read-create · current The base value used to compute the reachable time for neighbors reached via this interface. See alaIPv6InterfaceReachableTime above.
| ||||
| CalaIPv6InterfaceMinRtrAdvInterval | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.17 | Unsigned32 (0..1350) | RC | |
column · Unsigned32 (0..1350) · read-create · current The minimum time allowed between sending unsolicited multicast router advertisements from the interface. The time must be a minimum of 3 seconds and no more than .75 times the value of alaIPv6InterfaceMaxRtrAdvInterval. Setting this object to the special value of 0 indicates that the minimum interval should be automatically recalculated using the formula .33 times the value of alaIPv6InterfaceMaxRtrAdvInterval.
| ||||
| CalaIPv6InterfaceClockSkew | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.18 | Unsigned32 (0..3600) | RC | |
column · Unsigned32 (0..3600) · read-create · current Router Advertisement decrementing timers must be consistent in all Advertisements on the link. The clock skew accounts for link propogation delays and poorly synchronized clocks.
| ||||
| CalaIPv6InterfaceRetransTimer | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.19 | Unsigned32 (1000..30000) | RC | |
column · Unsigned32 (1000..30000) · read-create · current The amount of time to wait before retransmitting a Neighbor Solicitation during neighbor discovery.
| ||||
| CalaIPv6InterfaceDADTransmits | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.20 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The number of Neighbor Solicitations to send during Duplicate Address Detection. | ||||
| CalaIPv6InterfaceAdvHopLimit | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.21 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The value placed in the current hop limit field of router advertisements. | ||||
| CalaIPv6InterfaceDADEnable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current The TRUE/FALSE value determines whether DAD has to be performed or not. | ||||
| NalaIPv6TunnelConfig | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3 | |||
| TalaIPv6ConfigTunnelTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2 | NA | ||
table · not-accessible · current Table for IPv6 configured tunnels. This table contains the tunnel-specific information extending the corresponding tunnel interface entry in alaIPv6InterfaceTable. | ||||
| RalaIPv6ConfigTunnelEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2.1 | NA | ||
row · not-accessible · current A entry contains the objects for an IPv6 configured tunnel.
| ||||
| CalaIPv6ConfigTunnelV4Source | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2.1.1 | IpAddress | RC | |
column · IpAddress · read-create · current The source IPv4 address for the tunnel. | ||||
| CalaIPv6ConfigTunnelV4Dest | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IPv4 address for the tunnel. | ||||
| TalaIPv6InterfaceAddressTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4 | NA | ||
table · not-accessible · current Table allowing the creation and removal of IPv6 addresses assigned to interfaces. | ||||
| RalaIPv6InterfaceAddressEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1 | NA | ||
row · not-accessible · current An IPv6 interface address entry.
The same link-local address may be assigned to
multiple interfaces. A global address may only
be assigned to a single interface. | ||||
| CalaIPv6InterfaceAddressRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Used to control the addition and removal of IPv6 interface addresses. | ||||
| CalaIPv6InterfaceAddress | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.2 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current An IPv6 address (or prefix for EUI-64 addresses) assigned to the interface. | ||||
| CalaIPv6InterfaceAddressPrefixLength | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.3 | Unsigned32 (3..128) | RC | |
column · Unsigned32 (3..128) · read-create · current The number of bits that are significant in the IPv6 address' prefix. | ||||
| CalaIPv6InterfaceAddressAnycastFlag | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current This object has the value 'true(1)', if this address is an anycast address and the value 'false(2)' otherwise. | ||||
| CalaIPv6InterfaceAddressDADStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The status of duplicate address detection for this address. The only value that may be set via SNMP is 'check' when the current status is 'duplicate'. In such cases, duplicate address detection will be performed again for the address.
| ||||
| TalaIPv6InterfaceEUI64AddressTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5 | NA | ||
table · not-accessible · current Table allowing the creation and removal of IPv6 addresses formed by appending an EUI-64 interface identifier to the specified prefix. This table is mainly used for the creation of such addresses. After creation they can be managed via the alaIPv6InterfaceAddressTable. | ||||
| RalaIPv6InterfaceEUI64AddressEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1 | NA | ||
row · not-accessible · current An IPv6 interface EUI-64 address entry. | ||||
| CalaIPv6InterfaceEUI64AddressRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Used to control the addition and removal of IPv6 interface EUI-64 addresses. | ||||
| CalaIPv6InterfaceEUI64AddressPrefix | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.2 | AlaIPv6AddressPrefix | NA | |
column · AlaIPv6AddressPrefix · not-accessible · current The prefix for the EUI-64 address. | ||||
| CalaIPv6InterfaceEUI64AddressPrefixLength | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.3 | Unsigned32 (3..64) | RC | |
column · Unsigned32 (3..64) · read-create · current The number of bits that are significant in the IPv6 address' prefix. | ||||
| CalaIPv6InterfaceEUI64AddressIdentifier | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.4 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The interface's EUI-64 identifier which is combined with the prefix to form the IPv6 address. | ||||
| TalaIPv6NeighborTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6 | NA | ||
table · not-accessible · current The IPv6 neighbor table. Much of this information is
available in the RFC-2465 ipv6NetToMediaTable. However,
that table does not allow the static configuration of
neighbor entries (all objects except for
ipv6NetToMediaValid are read-only). | ||||
| RalaIPv6NeighborEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1 | NA | ||
row · not-accessible · current Each entry contains one IPv6 address to `physical' address equivalence (a neighbor). | ||||
| CalaIPv6NeighborNetAddress | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.1 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current The neighbor's IPv6 Address. | ||||
| CalaIPv6NeighborPhysAddress | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.2 | PhysAddress | RC | |
column · PhysAddress · read-create · current The neighbor's media-dependent `physical' address. | ||||
| CalaIPv6NeighborSlot | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The slot used to reach the neighbor. When creating a static neighbor the slot must be specified. On read, a value of zero indicates the slot is not known/not applicable. | ||||
| CalaIPv6NeighborPort | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The port used to reach the neighbor. When creating a static neighbor the port must be specified. On read, a value of zero indicates the port is not known/not applicable. | ||||
| CalaIPv6NeighborType | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that the mapping has been statically configured. The local(4) indicates that the mapping is provided for an entity's own interface address. All entries added via this table will have the type static(3) and only static entries may be removed via this table.
| ||||
| CalaIPv6NeighborState | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.6 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The Neighbor Unreachability Detection state for the interface when the address mapping in this entry is used.
| ||||
| CalaIPv6NeighborLastUpdated | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.7 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. | ||||
| CalaIPv6NeighborRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Used to control the addition and removal of static entries in the neighbor table. | ||||
| CalaIPv6NeighborLifetime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The remaining time the neighbor will stay in its current state. External events may cause a state change before the expiry of this lifetime. A value of zero indicates the neighbor will remain in its current state indefinitely.
| ||||
| CalaIPv6NeighborReachability | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The reachability status of the neighbor.
| ||||
| TalaIPv6StaticRouteTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7 | NA | obsolete | |
table · not-accessible · obsolete This table has been superseded by alaIprmV6StaticRouteTable in
ALCATEL-IND1-IPRMV6-MIB.
Table allowing the creation and removal of static
IPv6 routes. | ||||
| RalaIPv6StaticRouteEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1 | NA | obsolete | |
row · not-accessible · obsolete A static route entry. | ||||
| CalaIPv6StaticRouteDest | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.1 | Ipv6Address | NA | obsolete |
column · Ipv6Address · not-accessible · obsolete The destination IPv6 address of this static route. This object may not take a Multicast address value. | ||||
| CalaIPv6StaticRoutePfxLength | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.2 | INTEGER (0..128) | NA | obsolete |
column · INTEGER (0..128) · not-accessible · obsolete Indicates the prefix length of the destination address. | ||||
| CalaIPv6StaticRouteIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.3 | Ipv6IfIndexOrZero | RC | obsolete |
column · Ipv6IfIndexOrZero · read-create · obsolete If the next hop address is a link-local
address, this is the ipv6IfIndex value of the
interface over which the destination is reached.
For all other next hop address types the value
is zero. | ||||
| CalaIPv6StaticRouteNextHop | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.4 | Ipv6Address | RC | obsolete |
column · Ipv6Address · read-create · obsolete The IPv6 address of the next hop towards the destination. | ||||
| CalaIPv6StaticRouteMetric | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.5 | Unsigned32 | RC | obsolete |
column · Unsigned32 · read-create · obsolete The routing metric for this route. The lower the value, the higher the priority for the static route. | ||||
| CalaIPv6StaticRouteRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.6 | RowStatus | RC | obsolete |
column · RowStatus · read-create · obsolete Used to control the addition and removal of static routes. | ||||
| TalaIPv6HostTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8 | NA | ||
table · not-accessible · current Local table mapping host names to IPv6 addresses. This provides the equivalent of /etc/hosts for IPv6. | ||||
| RalaIPv6HostEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1 | NA | ||
row · not-accessible · current A entry maps a host name to an IPv6 address. | ||||
| CalaIPv6HostName | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1.1 | DisplayString (SIZE (1..64)) | NA | |
column · DisplayString (SIZE (1..64)) · not-accessible · current A host name to be mapped to an IPv6 address. | ||||
| CalaIPv6HostAddress | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1.2 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current The IPv6 address mapped to the host name. | ||||
| CalaIPv6HostRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Allows host name/IPv6 address mappings to be created and deleted in this table. | ||||
| TalaIPv6InterfacePrefixTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9 | NA | ||
table · not-accessible · current Table allowing the creation and removal of IPv6 prefixes to be placed in Prefix Information options in Router Advertisement messages sent from the interface. Default: all prefixes that the router advertises via routing protocols as being on-link for the interface from which the advertisement is sent. The link-local prefix is not included in the list of advertised prefixes. | ||||
| RalaIPv6InterfacePrefixEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1 | NA | ||
row · not-accessible · current An IPv6 interface prefix entry. | ||||
| CalaIPv6InterfacePrefixRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Used to control the addition and removal of IPv6 interface prefixes for Router ADvertisement messages. | ||||
| CalaIPv6InterfacePrefix | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.2 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current The prefix associated with this interface. | ||||
| CalaIPv6InterfacePrefixLength | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.3 | Unsigned32 (1..127) | NA | |
column · Unsigned32 (1..127) · not-accessible · current The length of the prefix in bits. | ||||
| CalaIPv6InterfacePrefixValidLifetime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value to be placed in the Valid Lifetime in the Prefix Information option, in seconds. The designated value of 4,294,967,295 represents infinity.
| ||||
| CalaIPv6InterfacePrefixOnLinkFlag | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The value to be placed in the on-link flag (L-bit) field in the Prefix Information option. | ||||
| CalaIPv6InterfacePrefixPreferredLifetime | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.6 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value to be placed in the Preferred Lifetime in the Prefix Information option, in seconds. The designated value of 4,294,967,295 represents infinity.
| ||||
| CalaIPv6InterfacePrefixAutonomousFlag | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current The value to be placed in the Autonomous Flag field in the Prefix Information option. | ||||
| CalaIPv6InterfacePrefixSource | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The source of this prefix. If configured by management the value will be configured(3). If determined automatically from IPv6 interface address configuration the value will be dynamic(2).
| ||||
| CalaIPv6InterfacePrefixValidLifetimeDecrement | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current If true, use the remaining seconds derived from alaIPv6InterfacePrefixValidLifetime in the Router Advertisement. If false, use the static value alaIPv6InterfacePrefixValidLifetime. | ||||
| CalaIPv6InterfacePrefixValidLifetimeExpire | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.10 | DateAndTime | RC | |
column · DateAndTime · read-create · current The date and time when the advertised prefix Valid Lifetime expires. To use this value, alaIPv6InterfaceValidLifetimeDecrement must be set to true. | ||||
| CalaIPv6InterfacePrefixPreferredLifetimeDecrement | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current If true, use the remaining seconds derived from alaIPv6InterfacePrefixPreferredLifetime in the Router Advertisement. If false, use the static value alaIPv6InterfacePrefixPreferredLifetime. | ||||
| CalaIPv6InterfacePrefixPreferredLifetimeExpire | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.12 | DateAndTime | RC | |
column · DateAndTime · read-create · current The date and time when the advertised prefix Preferred Lifetime expires. To use this value, alaIPv6InterfacePreferredLifetimeDecrement must be set to true. | ||||
| TalaIPv6PMTUTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10 | NA | ||
table · not-accessible · current Table allowing the retrieval of the known IPv6 path MTU value. | ||||
| RalaIPv6PMTUEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1 | NA | ||
| CalaIPv6PMTUDest | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.1 | Ipv6Address | NA | |
column · Ipv6Address · not-accessible · current The destination address of the IPv6 path. | ||||
| CalaIPv6PMTU | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The path's MTU. | ||||
| CalaIPv6PMTUExpire | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The minimum time remaining before the PMTU entry is removed from the table.
| ||||
| CalaIPv6PMTUHits | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times the path MTU entry has been used. | ||||
| CalaIPv6PMTUUpdates | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times the path MTU entry has been updated. | ||||
| TalaIPv6RouteFlagsTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11 | NA | ||
table · not-accessible · current Table allowing the retrieval of the flags for IPv6 route entries. | ||||
| RalaIPv6RouteFlagsEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1 | NA | ||
| CalaIPv6RouteFlagsUp | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current True if the Up (U) flag is set on the route. | ||||
| CalaIPv6RouteFlagsGateway | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current True if the Gateway (G) flag is set on the route. | ||||
| CalaIPv6RouteFlagsHost | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current True if the Host (H) flag is set on the route. | ||||
| CalaIPv6RouteFlagsStatic | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current True if the Static (S) flag is set on the route. | ||||
| CalaIPv6RouteFlagsCloneable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current True if the Cloneable (C) flag is set on the route. | ||||
| CalaIPv6RouteFlagsDiscard | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current True if the Discard/Blackhole (B) flag is set on the route. | ||||
| CalaIPv6RouteFlagsECMP | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current True if the ECMP (E) flag is set on the route. | ||||
| NalcatelIND1IPv6Traps | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.12 | |||
| NalcatelIND1IPv6TrapsRoot | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.12.0 | |||
| !ndpMaxLimitReached | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.12.0.1 | |||
notification · current This notification is generated when hardware table has reached supported Maximum entries. OS6400 will not generate new ARP request for new nexthops | ||||
| TalaIPv6LocalUnicastTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13 | NA | ||
table · not-accessible · current Table allowing the creation and removal of local IPv6 unicast addresses (RFC 4193) on an interface. | ||||
| RalaIPv6LocalUnicastEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1 | NA | ||
row · not-accessible · current An local unicast IPv6 address entry. | ||||
| CalaIPv6LocalUnicastGlobalID | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.1 | OCTET STRING (SIZE (5)) | NA | |
column · OCTET STRING (SIZE (5)) · not-accessible · current The global ID portion of the local IPv6 unicast address. Leave the value as all zero when adding a new addres to use the alaIPv6GlobalID value. | ||||
| CalaIPv6LocalUnicastSubnetID | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.2 | OCTET STRING (SIZE (2)) | NA | |
column · OCTET STRING (SIZE (2)) · not-accessible · current The subnet ID portion of the local IPv6 unicast address. | ||||
| CalaIPv6LocalUnicastInterfaceID | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.3 | OCTET STRING (SIZE (8)) | NA | |
column · OCTET STRING (SIZE (8)) · not-accessible · current The interface identifier portion of the local IPv6 unicast address. When alaIPv6LocalUnicastEUI64 is true(1) the value of this object should be all zero. | ||||
| CalaIPv6LocalUnicastPrefixLength | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.4 | Unsigned32 (64..128) | RC | |
column · Unsigned32 (64..128) · read-create · current The number of bits that are significant in the IPv6 address prefix. | ||||
| CalaIPv6LocalUnicastEUI64 | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current If true(1) the interface identifier is formed from an automatically generated EUI-64 value. | ||||
| CalaIPv6LocalUnicastRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current Used to control the addition and removal of local IPv6 unicast addresses. | ||||
| TalaIpv6RafVlanTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14 | NA | ||
table · not-accessible · current A table that contains the IPV6 RAF Vlans | ||||
| RalaIpv6RafVlanEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1 | NA | ||
| CalaIpv6RafVlan | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1.1 | Unsigned32 (1..4094) | NA | |
column · Unsigned32 (1..4094) · not-accessible · current The VLAN ID for which RAF is enabled. | ||||
| CalaIpv6RafVlanRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding | ||||
| CalaIpv6RafVlanActiveStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current The TRUE/FALSE value to specify the status of RA-Filter. | ||||
| TalaIpv6RafPortTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15 | NA | ||
table · not-accessible · current A table that contains the IPV6 RAF ports ports for a vlan | ||||
| RalaIpv6RafPortEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1 | NA | ||
row · not-accessible · current The list of ports of VLAN for which RAF is enabled | ||||
| CalaIpv6RafPortVlan | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.1 | Unsigned32 (1..4094) | NA | |
column · Unsigned32 (1..4094) · not-accessible · current The VLAN ID for which RAF is enabled. | ||||
| CalaIpv6RafPortIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.2 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The IfIndex of this UNI Port. | ||||
| CalaIpv6RafPortRowStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a trusted port from vlan | ||||
| CalaIpv6RafPortActiveStatus | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current The TRUE/FALSE value to specify the status of RA-Filter Port. | ||||
| TalaIpv6RafCounterStatsTable | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16 | NA | ||
table · not-accessible · current A table that contains the IPV6 RAF Counter statistics | ||||
| RalaIpv6RafCounterStatsEntry | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16.1 | NA | ||
row · not-accessible · current The list of NI's for which RAF counter statistics is displayed
| ||||
| CalaIpv6RafNi | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16.1.1 | INTEGER (1..8) | NA | |
column · INTEGER (1..8) · not-accessible · current The NI for which RAF is enabled and is UP. | ||||
| CalaIpv6RafUntrustedPktCnt | 1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16.1.2 | Unsigned32 (0..4000000000) | RO | |
column · Unsigned32 (0..4000000000) · read-only · current The Untrusted packets count for Ra-filter enabled NI's. | ||||
| NalcatelIND1IPv6MIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2 | |||
| NalcatelIND1IPv6MIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.1 | |||
| MalaIPv6Compliance | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.1.1 | |||
compliance · current The compliance statement for switches with Alcatel IPv6 stack and implementing ALCATEL-IND1-IPV6-MIB.
| ||||
| NalcatelIND1IPv6MIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2 | |||
| GalaIPv6TunnelConfigGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.1 | |||
group · current A collection of objects to support management of Alcatel IPv6 tunneling. | ||||
| GalaIPv6ConfigGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.2 | |||
group · current A collection of objects to support management of configuration parameters of Alcatel IPv6 stack. | ||||
| GalaIPv6NeighborGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.3 | |||
group · current A collection of objects to support management of IPv6 neighbors. | ||||
| GalaIPv6StaticRouteGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.4 | obsolete | ||
group · obsolete A collection of objects to support management of IPv6 static routes. | ||||
| GalaIPv6InterfaceGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.5 | |||
group · current A collection of objects to support management of IPv6 interfaces.
| ||||
| GalaIPv6InterfaceAddressGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.6 | |||
group · current A collection of objects to support management of IPv6 addresses assigned to interfaces. | ||||
| GalaIPv6InterfaceEUI64AddressGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.7 | |||
group · current A collection of objects to support management of IPv6 EUI-64 addresses assigned to interfaces. | ||||
| GalaIPv6InterfacePrefixGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.8 | |||
group · current A collection of objects to support management of IPv6 prefixes assigned to interfaces.
| ||||
| GalaIPv6PMTUGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.9 | |||
group · current A collection of objects to support management of IPv6 path MTUs. | ||||
| GalaIPv6RouteFlagsGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.10 | |||
group · current A collection of objects to support management of IPv6 route flags. | ||||
| GalaIPv6LocalUnicastGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.11 | |||
group · current A collection of objects to support management of local IPv6 unicast addresses (RFC 4193). | ||||
| GalaIPv6HostGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.12 | |||
| GalcatelIND1IPv6TrapsGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.13 | |||
group · current This notification is generated when hardware table has reached supported Maximum entries.
| ||||
| GalaIpv6RafVlanGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.14 | |||
group · current A collection of objects to support management of IPv6 RAF | ||||
| GalaIpv6RafPortGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.15 | |||
group · current A collection of objects to support management of local IPv6 unicast addresses (RFC 4193). | ||||
| GalaIpv6RafCounterStatsGroup | 1.3.6.1.4.1.6486.800.1.2.1.29.1.2.2.16 | |||
group · current A collection of objects to support management of IPv6 RAF
| ||||
Textual conventions
AlaIPv6AddressPrefixOCTET STRING (SIZE (8))Display hint:
2x:A data type for the 8 byte IPv6 prefixes for EUI-64 addresses
Traps / Notifications
- ndpMaxLimitReached
1.3.6.1.4.1.6486.800.1.2.1.29.1.1.12.0.1
Groups and compliance
- alaIPv6Compliance
- alaIPv6ConfigGroup
- alaIPv6HostGroup
- alaIPv6InterfaceAddressGroup
- alaIPv6InterfaceEUI64AddressGroup
- alaIPv6InterfaceGroup
- alaIPv6InterfacePrefixGroup
- alaIPv6LocalUnicastGroup
- alaIPv6NeighborGroup
- alaIPv6PMTUGroup
- alaIPv6RouteFlagsGroup
- alaIPv6StaticRouteGroup
- alaIPv6TunnelConfigGroup
- alaIpv6RafCounterStatsGroup
- alaIpv6RafPortGroup
- alaIpv6RafVlanGroup
- alcatelIND1IPv6TrapsGroup