ALCATEL-IND1-INLINE-POWER-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary InLinePower Extensions MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-INLINE-POWER-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-INLINE-POWER-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.27.1Imports
| ALCATEL-IND1-BASE | pethTraps, softentIND1InLinePower |
|---|---|
| POWER-ETHERNET-MIB | pethMainPseEntry, pethPsePortEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1INLINEPOWERMIB | 1.3.6.1.4.1.6486.800.1.2.1.27.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary InLinePower Extensions MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalaPethObjects | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1 | |||
| TalaPethPsePortTable | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1 | NA | ||
table · not-accessible · current A table of objects that augments the standard pethPsePortTable entry by adding the alaPethPsePortPowerMaximum object. | ||||
| RalaPethPsePortEntry | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1 | NA | ||
row · not-accessible · current A set of objects that display and control the power characteristics of a power Ethernet PSE port.
| ||||
| CalaPethPsePortPowerMaximum | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.1 | INTEGER (3000..75000) | RW | |
column · INTEGER (3000..75000) · read-write · current This object controls maximum amount of power per port. | ||||
| CalaPethPsePortPowerActual | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.2 | INTEGER (0..30000) | RO | |
column · INTEGER (0..30000) · read-only · current This object contains the actual amount of power used by a port | ||||
| CalaPethPsePortPowerStatus | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object contains the power status of a port
| ||||
| CalaPethPsePortPowerClass | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object controls class of poe device attached on a port. class0 - The device can draw PD power from 0.44W to 12.95W and current less than 5.0 mA. class1 - The device can draw PD power from 0.44W to 3.84W and current 10.5 mA. class2 - The device can draw PD power from 3.84W to 6.49W and current 12.95 mA. class3 - The device can draw PD power from 6.49W to 12.95W and current 28 mA. class4 - This class is reserved for future use. class5 - No Powered Device is connected to this POE port, or the port is powered down.
| ||||
| TalaPethMainPseTable | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2 | NA | ||
table · not-accessible · current This table augments the standard table PethMainPseTable by allowing the admin status for a group to be set to on/off as well as showing the values for the max power for that group. | ||||
| RalaPethMainPseEntry | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1 | NA | ||
row · not-accessible · current A set of objects that display and control the Main power of a PSE.
| ||||
| CalaPethMainPseAdminStatus | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to set the status of the main PSE to ON or OFF.
| ||||
| CalaPethMainPseMaxPower | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.2 | Integer32 (36..800) | RW | |
column · Integer32 (36..800) · read-write · current The maximum amount of power allowed for main PSE.
| ||||
| CalaPethMainPsePriorityDisconnect | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to set the priority disconnect of the main PSE to Enabled or Disable.
| ||||
| CalaPethMainPseCapacitorDetect | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to enable or disable the PowerDsine Capacitor detection method.
| ||||
| CalaPethMainPsePriority | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The object is set the power down priority for the slot
| ||||
| CalaPethMainPseComboPort | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to set the combo port option of the main PSE to Enable or Disable.
| ||||
| CalaPethMainPseHighResistorDetect | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to enable or disable the PowerDsine High Resistance detection method.
| ||||
| CalaPethMainPseDelayStartStatus | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The object is used to enable or disable the PowerDsine Delayed Start method.
| ||||
| CalaPethMainPseDelayStartValue | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.2.1.9 | Integer32 (120..600) | RW | |
column · Integer32 (120..600) · read-write · current Delayed start value for lanpower start-up
| ||||
| NalaPethNotificationObjects | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3 | |||
| SpethSourceSlot | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.1 | INTEGER (1..64) | AN | |
scalar · INTEGER (1..64) · accessible-for-notify · current Slot number of generating entity. | ||||
| SpethSourcePort | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.2 | INTEGER (1..48) | AN | |
scalar · INTEGER (1..48) · accessible-for-notify · current Port number of generating entity. | ||||
| SpethSourcePortDetectionStatus | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.3 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Describes the current state of the Port.
| ||||
| SpethSourcePortStatusChangeReason | 1.3.6.1.4.1.6486.800.1.2.1.27.1.1.3.4 | SnmpAdminString | AN | |
scalar · SnmpAdminString · accessible-for-notify · current Describes the reason of change in state. | ||||
| NalaPethConformance | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2 | |||
| NalaPethCompliances | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.1 | |||
| MalaPethCompliance | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.1.1 | |||
compliance · current Describes the requirements for conformance to the Alcatel Power Ethernet MIB. | ||||
| MalaPethPseCompliance | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.1.2 | |||
compliance · current Describes the requirements for conformance to the PSE | ||||
| NalaPethGroups | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2 | |||
| GalaPethPsePortGroup | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.1 | |||
group · current The pethPsePortGroup is mandatory for systems which implement PSE ports. | ||||
| GalaPethMainPseGroup | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.2 | |||
group · current Main PSE Objects. | ||||
| GpethTrapsGroup | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.3 | |||
| GalaPethTrapObjGroup | 1.3.6.1.4.1.6486.800.1.2.1.27.1.2.2.4 | |||
group · current Collection of Objects used by PETH Notifications.
| ||||
| NalaPethMain | 1.3.6.1.4.1.6486.800.1.2.1.27.1.3 | |||
| TalaPethMainTable | 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1 | NA | ||
table · not-accessible · current A table of objects that augments the standard pethPsePortTable entry by adding the alaPethPsePortPowerMaximum object. | ||||
| RalaPethMainEntry | 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1.1 | NA | ||
row · not-accessible · current A set of objects that display and control the power characteristics of a power Ethernet PSE port.
| ||||
| CalaPethMainIndex | 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current This variable uniquely identifies the group to which power Ethernet PSE is connected.Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices | ||||
| CalaPethMainPowerRedundancy | 1.3.6.1.4.1.6486.800.1.2.1.27.1.3.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object controls power supply redundancy.
| ||||
| !pethPwrSupplyConflict | 1.3.6.1.4.1.6486.800.1.3.2.17.0.1 | |||
| !pethPwrSupplyNotSupported | 1.3.6.1.4.1.6486.800.1.3.2.17.0.2 | |||
Traps / Notifications
- pethPwrSupplyConflict
1.3.6.1.4.1.6486.800.1.3.2.17.0.1 - pethPwrSupplyNotSupported
1.3.6.1.4.1.6486.800.1.3.2.17.0.2