ALCATEL-IND1-ETHERNET-OAM-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the OmniSwitch Product Line
Ethernet OAM for the Connectivity Fault Management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-ETHERNET-OAM-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-ETHERNET-OAM-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.40.1Imports
| ALCATEL-IND1-BASE | softentIND1EthernetOam |
|---|---|
| IEEE8021-CFM-MIB | Dot1agCfmMepId, Dot1agCfmMepIdOrZero, dot1agCfmMaIndex, dot1agCfmMdIndex, dot1agCfmMepEntry, dot1agCfmMepIdentifier |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1EoamMIB | 1.3.6.1.4.1.6486.800.1.2.1.40.1 | |||
identity This module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the OmniSwitch Product Line
Ethernet OAM for the Connectivity Fault Management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1CfmMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1 | |||
node · current Branch For Connectivity Fault Management (Ethernet OAM) Objects. | ||||
| NalaCfmBase | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.1 | |||
| SalaCfmGlobalClearStats | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the global clear statistics control for Ethernet OAM. The value reset (1) indicates that Ethernet OAM should clear all statistic counters related to all MEPs in the system. By default, this object contains a zero value.
| ||||
| SalaCfmGlobalOWDClear | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the global clear of one-way-delay entries control for Ethernet OAM. The value reset (1) indicates that Ethernet OAM should remove all the one-way-delay entries in the delay result table. By default, this object contains a zero value.
| ||||
| SalaCfmGlobalTWDClear | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the global clear of two-way-delay entries control for Ethernet OAM. The value reset (1) indicates that Ethernet OAM should remove all the two-way-delay entries in the delay result table. By default, this object contains a zero value.
| ||||
| NalaCfmMep | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2 | |||
| TalaCfmMepTable | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1 | NA | ||
table · not-accessible · current This table augments the MEP table for clearing statistics based on MdIndex/MaIndex/MEPId. This table also contains the objects for initiating 1DM and DMM. | ||||
| RalaCfmMepEntry | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1 | NA | ||
row · not-accessible · current Each row entry in the alaCfmMepTable represents additional
column for proprietary extension to the existing MEP table.
It provides the facility to clear the statistics based on
uniquely identified MEP. It also provides the facility to
intiate 1DM and DMM
| ||||
| CalaCfmMepClearStats | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current Reset all statistics parameters corresponding to this MEP. By default, this objects contains a zero value.
| ||||
| CalaCfmMepOWDTMacAddress | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.2 | MacAddress | RC | |
column · MacAddress · read-create · current Specifies the MAC address used as a target for the One-Way-Delay Test (OWDT). Setting this object will trigger a One-Way-Delay test to the specified MAC address. The number of messages transmitted per initiation will be 2. Upon completion of the test, the MacAddress will revert to it's default value, indicating that another test is possible. | ||||
| CalaCfmMepOWDTRMepIdentifier | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.3 | Dot1agCfmMepId | RC | |
column · Dot1agCfmMepId · read-create · current Specifies the Mep-Id assigned to the Remote MEP. | ||||
| CalaCfmMepOWDTPriority | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.4 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current Specifies the priority used in the generated test frame for the One-Way-Delay test. | ||||
| CalaCfmMepTWDTMacAddress | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.5 | MacAddress | RC | |
column · MacAddress · read-create · current Specifies the MAC address used as a target for the Two-Way-Delay Test (TWDT). Setting this object will trigger a Two-Way-Delay test to the specified MAC address. The number of messages transmitted per initiation will be 2. Upon completion of the test, the MacAddress will revert to it's default value, indicating that another test is possible. | ||||
| CalaCfmMepTWDTRMepIdentifier | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.6 | Dot1agCfmMepId | RC | |
column · Dot1agCfmMepId · read-create · current Specifies the Mep-Id assigned to the Remote MEP. | ||||
| CalaCfmMepTWDTPriority | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.7 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current Specifies the priority used in the generated test frame for the Two-Way-Delay test. | ||||
| CalaCfmMepRFPEnabled | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current If set to true, Remote Fault Propagation will be enabled on the MEP. | ||||
| CalaCfmMepPortStatusTlv | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current If set to true, Port Status Tlv will be configured in CCM. | ||||
| CalaCfmMepIfStatusTlv | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.2.1.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current If set to true, Interface Status Tlv will be configured in CCM. | ||||
| NalaCfmDelayResult | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3 | |||
| TalaCfmDelayResultTable | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3.1 | NA | ||
table · not-accessible · current Indicates the results of all the One-Way/Two-Way Delay Tests from the originating MAC addresses. This table is not persistent over reboots of the chassis. | ||||
| RalaCfmDelayResultEntry | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3.1.1 | NA | ||
row · not-accessible · current The MEP delay result table. | ||||
| CalaCfmDelayResultType | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the type of test this row details.
| ||||
| CalaCfmDelayResultRMepMacAddress | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3.1.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current Indicates the MAC address of the Remote MEP. | ||||
| CalaCfmDelayResultRMepIdentifier | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3.1.1.3 | Dot1agCfmMepIdOrZero | RO | |
column · Dot1agCfmMepIdOrZero · read-only · current Indicates the Mep-Id of the Remote MEP. Valid only in the case of two-way delay. When initiated for a target Mep-Id contains the Mep-Id of the target, else if two-way delay initiated for a target mac-address contains '0'. | ||||
| CalaCfmDelayResultTestDelay | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Indicates the amount of time, measured in microseconds, from when the test-frame was transmitted to the time it was received minus the local processing time taken by the remote system.
| ||||
| CalaCfmDelayResultVariation | 1.3.6.1.4.1.6486.800.1.2.1.40.1.1.3.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the amount of time delay variation, measured in microseconds, from the two most recent time delay measurements
| ||||
| NalaCfmConformance | 1.3.6.1.4.1.6486.800.1.2.1.40.1.2 | |||
| NalaCfmGroups | 1.3.6.1.4.1.6486.800.1.2.1.40.1.2.1 | |||
| GalaCfmBaseGroup | 1.3.6.1.4.1.6486.800.1.2.1.40.1.2.1.1 | |||
group · current Mandatory objects for the Base group | ||||
| GalaCfmMepGroup | 1.3.6.1.4.1.6486.800.1.2.1.40.1.2.1.2 | |||
group · current Mandatory objects for the MEP group. Proprietary extension to support statistics clearing and one-way and two-way delay tests. | ||||
| GalaCfmDelayResultGroup | 1.3.6.1.4.1.6486.800.1.2.1.40.1.2.1.3 | |||
group · current Mandatory objects for the Delay Result Group. | ||||
| NalaCfmCompliances | 1.3.6.1.4.1.6486.800.1.2.1.40.1.2.2 | |||
| MalaCfmCompliance | 1.3.6.1.4.1.6486.800.1.2.1.40.1.2.2.1 | |||
compliance · current The compliance statement for support of CFM. | ||||