ALCATEL-IND1-DOT1X-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
The Port Access Entity module for managing 802.1X for
the OmniSwitch Product Line
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-DOT1X-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-DOT1X-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.30.1Imports
| ALCATEL-IND1-BASE | softentIND1Dot1X |
|---|---|
| IEEE8021-PAE-MIB | dot1xPaePortNumber |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IalcatelIND1Dot1XMIB | 1.3.6.1.4.1.6486.800.1.2.1.30.1 | ||||||||||||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
The Port Access Entity module for managing 802.1X for
the OmniSwitch Product Line
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | |||||||||||||
| NalaIND1Dot1XMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1 | ||||||||||||
node · current Branch For 802.1X Subsystem Managed Objects. | |||||||||||||
| TalaDot1xPortTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1 | NA | deprecated | ||||||||||
table · not-accessible · deprecated A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system. | |||||||||||||
| RalaDot1xPortEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1 | NA | deprecated | ||||||||||
| CalaDot1xPortSlotNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.1 | INTEGER (1..16) | NA | deprecated | |||||||||
column · INTEGER (1..16) · not-accessible · deprecated The slot that the logical port represented by the dot1xPaePortNumber resides. | |||||||||||||
| CalaDot1xPortPortNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.2 | INTEGER (1..48) | NA | deprecated | |||||||||
column · INTEGER (1..48) · not-accessible · deprecated The user port that the logical port represented by the dot1xPaePortNumber resides. | |||||||||||||
| CalaDot1xPortMACAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.3 | MacAddress | NA | deprecated | |||||||||
column · MacAddress · not-accessible · deprecated The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber. | |||||||||||||
| CalaDot1xPortVlan | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.4 | INTEGER (1..4096) | NA | deprecated | |||||||||
column · INTEGER (1..4096) · not-accessible · deprecated The vlan that the supplicant is authorized to access. | |||||||||||||
| CalaDot1xPortProtocol | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.5 | INTEGER (1..6) | NA | deprecated | |||||||||
column · INTEGER (1..6) · not-accessible · deprecated The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xPortVlan object. Supplicant can be authorized to different vlans for different protocol. | |||||||||||||
| CalaDot1xPortUserName | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.6 | DisplayString | NA | deprecated | |||||||||
column · DisplayString · not-accessible · deprecated The user name of the supplicant used for authentication. | |||||||||||||
| CalaDot1xPortState | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.7 | INTEGER | NA | deprecated | |||||||||
column · INTEGER · not-accessible · deprecated The State of the port.
| |||||||||||||
| CalaDot1xSupplicantPolicyUsed | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.8 | ALADot1xClassificationPolicyType | NA | deprecated | |||||||||
column · ALADot1xClassificationPolicyType · not-accessible · deprecated Classification Policy under which the 802.1x supplicant is learned. | |||||||||||||
| CalaDot1xAuthFailReason | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.9 | DisplayString | NA | deprecated | |||||||||
column · DisplayString · not-accessible · deprecated Authentication Failure reasons for 802.1x supplicant client. | |||||||||||||
| CalaDot1xReAuthCount | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.10 | INTEGER | NA | deprecated | |||||||||
column · INTEGER · not-accessible · deprecated Authentication Retry Count for 802.1x supplicant client. | |||||||||||||
| CalaDot1xLastSuccessTime | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.11 | DisplayString | NA | deprecated | |||||||||
column · DisplayString · not-accessible · deprecated Last successful time when client is authenticated. | |||||||||||||
| TalaDot1xPortLookupTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2 | NA | |||||||||||
table · not-accessible · current A table of which allows to find the logical port number given the physical slot/port/MAC. An entry appears in this table for each logical port of this system. | |||||||||||||
| RalaDot1xPortLookupEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1 | NA | |||||||||||
row · not-accessible · current The translation table to look up the dot1xPaePortNumber. | |||||||||||||
| CalaDot1xPortLookupSlotNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.1 | INTEGER (1..16) | RO | ||||||||||
column · INTEGER (1..16) · read-only · current The slot that the logical port represented by the dot1xPaePortNumber resides. | |||||||||||||
| CalaDot1xPortLookupPortNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.2 | INTEGER (1..48) | RO | ||||||||||
column · INTEGER (1..48) · read-only · current The physical port that the logical port represented by the dot1xPaePortNumber resides. | |||||||||||||
| CalaDot1xPortLookupMACAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.3 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber. | |||||||||||||
| CalaDot1xPortLookupInterfaceNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.4 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The ifIndex that represnets the slot and port where the dot1xPaePortNumber resides. | |||||||||||||
| TalaDot1xMacTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4 | NA | |||||||||||
table · not-accessible · current Provide the list of users currently authenticated into the switch for bridging purpose. | |||||||||||||
| RalaDot1xMacEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1 | NA | |||||||||||
| CalaDot1xMACAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber. | |||||||||||||
| CalaDot1xMacIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.2 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current Interface index in which alaDot1xMACAddress was learned. | |||||||||||||
| CalaDot1xMacSlotNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.3 | Integer32 (1..16) | RO | ||||||||||
column · Integer32 (1..16) · read-only · current The slot in which alaDot1xMACAddress was learned. | |||||||||||||
| CalaDot1xMacPortNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.4 | Integer32 (1..48) | RO | ||||||||||
column · Integer32 (1..48) · read-only · current The user port in which alaDot1xMACAddress was learned. | |||||||||||||
| CalaDot1xMacVlan | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.5 | Integer32 (1..4096) | RO | ||||||||||
column · Integer32 (1..4096) · read-only · current The vlan that the supplicant is authorized to access. | |||||||||||||
| CalaDot1xMacProtocol | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.6 | Integer32 (1..6) | RO | ||||||||||
column · Integer32 (1..6) · read-only · current The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xMacVlan object. Supplicant can be authorized to different vlans for different protocol. | |||||||||||||
| CalaDot1xMacUserName | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.7 | DisplayString (SIZE (0..64)) | RO | ||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The user name of the supplicant used for authentication. | |||||||||||||
| CalaDot1xMacState | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The State of the port in which the current mac-address was learned.
| |||||||||||||
| CalaDot1xMacSupplicantPolicyUsed | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.9 | ALADot1xClassificationPolicyType | RO | ||||||||||
column · ALADot1xClassificationPolicyType · read-only · current Classification Policy under which the 802.1x supplicant is learned. | |||||||||||||
| CalaDot1xHicEnabledMAC | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.10 | ALADot1xHicFlag | RO | deprecated | |||||||||
column · ALADot1xHicFlag · read-only · deprecated Flag to notify that MAC has been classified based on HIC policy | |||||||||||||
| TalaDot1xNonSupplicantTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5 | NA | |||||||||||
table · not-accessible · current A table of non 802.1x supplicants learned on 802.1x authenticated ports. | |||||||||||||
| RalaDot1xNonSupplicantEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1 | NA | |||||||||||
row · not-accessible · current Non 802.1x supplicant information. | |||||||||||||
| CalaDot1xNonSupplicantIntfNum | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.1 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current The ifIndex represneting the slot and port where the non 802.1x supplicant is learned. | |||||||||||||
| CalaDot1xNonSupplicantMACAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.2 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current The MAC address of the non 802.1x supplicant. | |||||||||||||
| CalaDot1xNonSupplicantVlanID | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.3 | INTEGER (1..4096) | RO | ||||||||||
column · INTEGER (1..4096) · read-only · current The Id of the VLAN on which the non 802.1x supplicant is learned. | |||||||||||||
| CalaDot1xNonSupplicantPolicyUsed | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.4 | ALADot1xClassificationPolicyType | RO | ||||||||||
column · ALADot1xClassificationPolicyType · read-only · current Classification policy under which the non 802.1x supplicant is learned. | |||||||||||||
| CalaDot1xAuthenticationStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Authentication status of the non 802.1x supplicant.
| |||||||||||||
| CalaDot1xNonSupplicantHicEnabledMAC | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.6 | ALADot1xHicFlag | RO | ||||||||||
column · ALADot1xHicFlag · read-only · current Flag to specify whether non supplicant is classified based on HIC. | |||||||||||||
| CalaDot1xNonSupplicantUserName | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The user name of the non-supplicant used for authentication. | |||||||||||||
| TalaDot1xAuthPolicyTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6 | NA | |||||||||||
table · not-accessible · current A table of supplicant and non supplicant device classification policies as they are configured on 802.1x authenticated ports. | |||||||||||||
| RalaDot1xAuthPolicyEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1 | NA | |||||||||||
row · not-accessible · current Device classification policies information. | |||||||||||||
| CalaDot1xAuthPolicyIntfNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex that represnets the slot and port where the device classification policies are configured. | |||||||||||||
| CalaDot1xNonSuppPolicy | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.2 | DisplayString (SIZE (0..127)) | RW | ||||||||||
column · DisplayString (SIZE (0..127)) · read-write · current MAC based authentication -> M
Group Mobility -> G
VLAN ID -> <vlan id>
Default VLAN -> D
Block -> B
Fail -> ,
Captive Portal -> C
UNP -> '<String>'
Examples: MGD,GB. The default value is B (block). If the string size is zero (0), the
default value is used. | |||||||||||||
| CalaDot1xSuppPolicy | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.3 | DisplayString (SIZE (0..127)) | RW | ||||||||||
column · DisplayString (SIZE (0..127)) · read-write · current 802.1x authentication -> X
Group Mobility -> G
VLAN ID -> <vlan id>
Default VLAN -> D
Block -> B
Fail -> ,
Captive Portal -> C
Mac-authentication -> F
UNP -> '<String>'
Default value: XGD,B. If the string size is zero (0), the default value is used. | |||||||||||||
| CalaDot1xPollingCnt | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.4 | Integer32 (0..99) | RW | ||||||||||
column · Integer32 (0..99) · read-write · current Number of retries to poll the end station for EAPoL frame before
classifying the end station with group mobility or guest vlan ID configured.
If the value is set to zero (0), it indicates a special case where the port will
ignore any EAP frame from the client and this will force all devices to the
non-supplicant policy for classification. | |||||||||||||
| CalaDot1xCaptivePortalPolicy | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.5 | DisplayString (SIZE (0..127)) | RW | ||||||||||
column · DisplayString (SIZE (0..127)) · read-write · current Web authentication -> W Group Mobility -> G VLAN ID -> <vlan id> Default VLAN -> D Block -> B Fail -> , Default value: XGD,B, if string size is zero, the default value is used. | |||||||||||||
| CalaDot1xCPortalSessionLimit | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.6 | Integer32 (0..999) | RW | ||||||||||
column · Integer32 (0..999) · read-write · current Captive Portal Session limit is the interval that a Captive Portal user can login. User is to be logged off after the session limit. If the session limit is set to zero (0), it means the session is unlimited, user will not be automatically logged off. | |||||||||||||
| CalaDot1xCPortalRetryCnt | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.7 | Integer32 (0..999) | RW | ||||||||||
column · Integer32 (0..999) · read-write · current Number of retries for the Captive Portal user to provide the user credential before the software will classify the user to the failed policy according the the alaDot1xCaptivePortalPolicy. | |||||||||||||
| CalaDot1xSupplicantBypass | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Supplicant Bypass configuration Status.
| |||||||||||||
| CalaDot1xSBAllowEAP | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Supplicant Bypass Allow EAP configuration.
| |||||||||||||
| CalaDot1xCPortalInactivityLogout | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Captive portal inactivity logout entry.
| |||||||||||||
| CalaDot1xNonSuppSessTimeoutStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Session Timeout Status for MAC users.
| |||||||||||||
| CalaDot1xNonSuppSessTimeoutIntrvl | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Session Timeout Status Interval for MAC users. | |||||||||||||
| CalaDot1xNonSuppSessTimeoutTrustRadStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Session Timeout Radius Status for Mac based authenticated users.
| |||||||||||||
| CalaDot1xSuppTrustRadiusEnabled | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable control to take the session timeout from the server
| |||||||||||||
| CalaDot1xNonSupInactivityLogout | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Mac Aging Timeout for non suplicant
| |||||||||||||
| CalaDot1xPerPortAPModeStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object is to enable or disable AP-mode on per port basis.
| |||||||||||||
| CalaDot1xPerPortForceL3Learning | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current UNP force L3 learning status.
| |||||||||||||
| CalaDot1xPerPortForceL3LearningPortBounce | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.18 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Port-Bounce associated with UNP force L3 learning status.
| |||||||||||||
| NalaDot1xCportalConfig | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7 | ||||||||||||
| SalaDot1xCPortalIpAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The factory default Captive Portal IP address is 10.123.0.1. If the 10.123.0.0 subnet is already in use, user can change the Captive Portal IP address to another 10.x.0.0 subnet. Only the second octet of the Captive Portal IP address can be changed. | |||||||||||||
| SalaDot1xCPortalProxyURL | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.2 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..64)) · read-write · current The factory default for Captive Portal working with proxy server url has the key word proxy. If the user's proxy server url does not have the key work proxy, user can use this object to specify the proxy server url. If none is specified this object will return the default value - proxy. | |||||||||||||
| SalaDot1xCPortalPostAuthSuccessRedirectURL | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.3 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Captive Portal's Redirect URL upon successful authentication. | |||||||||||||
| SalaDot1xCPortalPostAuthFailRedirectURL | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.4 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Captive Portal's Redirect URL upon failed authentication. | |||||||||||||
| SalaDot1xCPortalDNSKeyword1 | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.5 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Captive Portal's DNS keyword string. | |||||||||||||
| SalaDot1xCPortalDNSKeyword2 | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.6 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Captive Portal's DNS keyword string. | |||||||||||||
| SalaDot1xCPortalDNSKeyword3 | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.7 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Captive Portal's DNS keyword string. | |||||||||||||
| SalaDot1xCPortalDNSKeyword4 | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.8 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Captive Portal's DNS keyword string. | |||||||||||||
| SalaDot1xCPortalProxyPort | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.9 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Captive Portal's user defined proxy port number. | |||||||||||||
| SalaDot1xCPortalRedirectString | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.10 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current Captive Portal redirect url key string. | |||||||||||||
| TalaDot1xDeviceStatusTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8 | NA | |||||||||||
table · not-accessible · current A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system. | |||||||||||||
| RalaDot1xDeviceStatusEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1 | NA | |||||||||||
row · not-accessible · current One entry of the Device Status Table. | |||||||||||||
| CalaDot1xDeviceStatusMacQueryType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.1 | ALADot1xMacQueryType | RO | 0 | |||||||||
column · ALADot1xMacQueryType · read-only · current The type of MAC address to query. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusSlotNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.2 | INTEGER (1..16) | RO | 2 | |||||||||
column · INTEGER (1..16) · read-only · current The slot that the device reporting the status resides. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusPortNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.3 | INTEGER (1..48) | RO | 12 | |||||||||
column · INTEGER (1..48) · read-only · current The user port that the device reporting the status resides. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusMACAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.4 | MacAddress | RO | 24:28:fd:35:ba:77 | |||||||||
column · MacAddress · read-only · current The MAC address of the device reporting the status. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusDeviceType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.5 | ALADot1xDeviceType | RO | 2 | |||||||||
column · ALADot1xDeviceType · read-only · current The type of device. Either supplicant or non-supplicant. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusVlan | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.6 | INTEGER (1..4096) | RO | 1000 | |||||||||
column · INTEGER (1..4096) · read-only · current The vlan that the device reporting the status is authorized to access. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusIPAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.7 | IpAddress | RO | 0 | |||||||||
column · IpAddress · read-only · current The IP address of the device reporting the status. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusUserName | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.8 | SnmpAdminString | RO | -- | |||||||||
column · SnmpAdminString · read-only · current The user name of the device reporting the status. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusProfileUsed | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.9 | SnmpAdminString | RO | example-client | |||||||||
column · SnmpAdminString · read-only · current The name of the User Network Profile entry used when the device reporting the status is classified. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusAuthType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.10 | ALADot1xAuthenticationType | RO | 2 | |||||||||
column · ALADot1xAuthenticationType · read-only · current The type of authentication used by the device reporting the status to obtain network access. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusPolicyUsed | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.11 | ALADot1xClassificationPolicyType | RO | 18 | |||||||||
column · ALADot1xClassificationPolicyType · read-only · current Classification Policy under which the device is learned. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusAuthResult | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.12 | ALADot1xAuthenticationResult | RO | 2 | |||||||||
column · ALADot1xAuthenticationResult · read-only · current The State of the port. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusMacLearntState | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.13 | ALADot1xMacLearntState | RO | 0 | |||||||||
column · ALADot1xMacLearntState · read-only · current The State of the MAC classified in the switch. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusTimeLearned | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.14 | TimeStamp | RO | 1792598774 | |||||||||
column · TimeStamp · read-only · current The time that the MAC address is learned in the system. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusCaptivePortalUsed | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.15 | TruthValue | RO | 2 | |||||||||
column · TruthValue · read-only · current The object indicates if the device is classified in the system using Captive Portal. A value of True means that the device has used Captive Portal to authenticate its credential and a value of False means that the device has not used Captive Portal to authenticate its credential. Example values from LibreNMS test devices
| |||||||||||||
| CalaDot1xDeviceStatusHicResult | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.16 | Integer32 (0..9) | RO | 0 | |||||||||
column · Integer32 (0..9) · read-only · current The Hic result of the device reporting the status is authorized to access. Default value is 0, indicates HIC process has not started Example values from LibreNMS test devices
| |||||||||||||
| NalaDot1xAdminLogoutParams | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9 | ||||||||||||
| SalaDot1xAdminLogoutType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When this variable is set, the switch is to logout the user based on the logout type. The associated MIB object should be correctly set based on the logout type. If the corresponding MIB object that contain the criteria is not set correctly the switch will not be able to perform the logout operation. After the logout operation is done, the switch will set the corresponding criteria to back to its default value. Also when the logout operation is done, the switch is to set this variable back to zero (0).
| |||||||||||||
| SalaDot1xAdminLogoutMacAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.2 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current This value is used only if alaDot1xAdminLogoutType is set to MAC address. The default value is set to ff:ff:ff:ff:ff:ff. This well know broadcast MAC address will not be learned by the switch. The switch will reset this to the default value after the logout operation is performed | |||||||||||||
| SalaDot1xAdminLogoutUserName | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.3 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current This value is used only if alaDot1xAdminLogoutType is set to username. The default is a NULL string. The switch will reset this to the default value after the logout operation is performed. User is not allowed to set the value to NULL. | |||||||||||||
| SalaDot1xAdminLogoutNetworkProfileName | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.4 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current This value is used only if alaDot1xAdminLogoutType is set to networkprofilename. The default is a NULL string. The switch will reset this to the default value after the logout operation is performed. User is not allowed to set the value to NULL. | |||||||||||||
| SalaDot1xAdminLogoutInterfaceId | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.5 | InterfaceIndexOrZero | RW | ||||||||||
scalar · InterfaceIndexOrZero · read-write · current This value is used only if alaDot1xAdminLogoutType is set to interfaceId. The default value is zero (0). The switch will reset this to the default value after the logout operation is performed. | |||||||||||||
| NalaDot1xAuthServerTimeout | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10 | ||||||||||||
| SalaDot1xAuthSvrTimeoutPolicy | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.1 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Block -> B User Network Profile -> 'user network profile name' Default value is B. | |||||||||||||
| SalaDot1xAuthSvrTimeoutReAuthPeriod | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.2 | Integer32 (30..43200) | RW | ||||||||||
scalar · Integer32 (30..43200) · read-write · current This is the time interval in second that the supplicant is to be classified according to the Auth Server Down Policy (alaDot1xAuthServerTimeoutPolicy). When this time is expired, the supplicant will be prompted to re-authenticate and see if the Auth Server is back up. The default value is 30 seconds. | |||||||||||||
| SalaDot1xAuthSvrTimeoutStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is to enable or disable the use of alaDot1xAuthSvrTimeoutPolicy, alaDot1xAuthSvrTimeoutVoicePolicy and alaDot1xAuthSvrTimeoutReAuthPeriod. Default is disabled.
| |||||||||||||
| SalaDot1xAuthSvrTimeoutVoicePolicy | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.4 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current None -> None User Network Profile -> 'user network profile name' Default value is None. | |||||||||||||
| SalaDot1xAuthSvrPollingStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This is object is to enable or disable the radius server polling feature. Default is disabled.
| |||||||||||||
| SalaDot1xAuthSvrDownMacPersistency | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This is the object to enable or disable the functionality to stop flushing SL context of the mac when an Eap Start is received when the auth server down is enabled and the server is still unreachable and if the client again claassifies in the same vlan and classification policy.In the normal case,server becomes reachable , delete the entire context and add.Default is disabled.
| |||||||||||||
| SalaDot1xDelayLearningPeriod | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.7 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current This is the time interval in seconds that is sent to all NIs for delaying authentication process after reboot. The default value is 120 seconds. | |||||||||||||
| SalaDot1xAPModeStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is to enable or disable AP-mode globally in switch. Default is Enabled
| |||||||||||||
| SalaDot1xEAPVersionStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is to enable or disable eap-version3 globally in switch. Default is Disabled
| |||||||||||||
| SalaDot1xForceL3Learning | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current UNP force L3 learning status.
| |||||||||||||
| SalaDot1xForceL3LearningPortBounce | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Port-Bounce associated with UNP force L3 learning status.
| |||||||||||||
| NalaPassthroughConfig | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11 | ||||||||||||
| SalaDot1xPassthroughStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11.1 | AlaPassThroughStatus | RW | ||||||||||
scalar · AlaPassThroughStatus · read-write · current Passthrough of 802.1x packets. Force the 802.1x packet to flood in the VLAN. | |||||||||||||
| SalaAvlanPassthroughStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11.2 | AlaPassThroughStatus | RW | ||||||||||
scalar · AlaPassThroughStatus · read-write · current Passthrough of AVLAN packets. Force the AVLAN packet to flood in the VLAN. | |||||||||||||
| SalaCportalPassthroughStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11.3 | AlaPassThroughStatus | RW | ||||||||||
scalar · AlaPassThroughStatus · read-write · current Passthrough of CAPITIVE packets. Force the AVLAN packet to flood in the VLAN. | |||||||||||||
| TalaKerberosPortTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12 | NA | |||||||||||
table · not-accessible · current A table of 802.1x ports which are configured as Kerberos enabled/disabled ports. | |||||||||||||
| RalaKerberosPortEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12.1 | NA | |||||||||||
| CalaKerberosPortIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current Interface index of the port on which Kerberos is configured. | |||||||||||||
| CalaKerberosPortStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Kerberos status on Port.
| |||||||||||||
| TalaDot1xCrlUnpTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13 | NA | |||||||||||
table · not-accessible · current Current Rate Limit Table On 8021x Port | |||||||||||||
| RalaDot1xCrlUnpEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1 | NA | |||||||||||
row · not-accessible · current Current Rate Limit Table entry on a 8021X port.
| |||||||||||||
| CalaDot1xCrlIfIndex | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex of the port. | |||||||||||||
| CalaDot1xCrlIngBw | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.2 | Integer32 (-1..10485760) | RO | ||||||||||
column · Integer32 (-1..10485760) · read-only · current Current Ingress BW active on 8021x Port in Kbps. Default value is -1 which means no Ingress Bandwidth exist on port. | |||||||||||||
| CalaDot1xCrlEgrBw | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.3 | Integer32 (-1..10485760) | RO | ||||||||||
column · Integer32 (-1..10485760) · read-only · current Current Egress BW active on 8021x Port in Kbps. Default value is -1 which means no Egress Bandwidth exist on port. | |||||||||||||
| CalaDot1xCrlIngTypeFlag | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Application responsible for setting Ingress BW on port. Default is - which means no application has set BW on port.
| |||||||||||||
| CalaDot1xCrlEgrTypeFlag | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Application responsible for setting Egress BW on port. Default is - which means no application has set BW on port.
| |||||||||||||
| CalaDot1xCrlDefDepth | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.6 | Integer32 (-1..131072) | RO | ||||||||||
column · Integer32 (-1..131072) · read-only · current Latest Default Depth applied on port. Default depth is -1 which means no depth is configured. BW is programmed with default optimal depth. | |||||||||||||
| CalaDot1xCrlIngProfile | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.7 | SnmpAdminString (SIZE (1..32)) | RO | ||||||||||
column · SnmpAdminString (SIZE (1..32)) · read-only · current The name of the UNP Profile Name responsible for setting current Ingress Bandwidth limitation on port. Applicable only if current bandwidth set is due to UNP classification on port. | |||||||||||||
| CalaDot1xCrlEgrProfile | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.8 | SnmpAdminString (SIZE (1..32)) | RO | ||||||||||
column · SnmpAdminString (SIZE (1..32)) · read-only · current The name of the UNP Profile Name responsible for setting current Egress Bandwidth limitation on port. Applicable only if current bandwidth set is due to UNP classification on port | |||||||||||||
| TalaRedirectByodHostTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14 | NA | |||||||||||
table · not-accessible · current This table shows list of BYOD Hosts and their progress status. | |||||||||||||
| RalaRedirectByodHostEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1 | NA | |||||||||||
row · not-accessible · current BYOD Hosts status information. | |||||||||||||
| CalaByodHostStateQueryType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.1 | ALADot1xMacQueryType | RO | ||||||||||
column · ALADot1xMacQueryType · read-only · current The type of the mac address whether supplicant or non-supplicant. | |||||||||||||
| CalaByodHostStateSlotNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.2 | Integer32 (1..16) | RO | ||||||||||
column · Integer32 (1..16) · read-only · current The slot Number. | |||||||||||||
| CalaByodHostStatePortNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.3 | Integer32 (1..48) | RO | ||||||||||
column · Integer32 (1..48) · read-only · current The port number. | |||||||||||||
| CalaByodHostStateMacAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.4 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current The Client MAc Address which is Index. | |||||||||||||
| CalaByodHostStateDeviceType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.5 | ALADot1xDeviceType | RO | ||||||||||
column · ALADot1xDeviceType · read-only · current To find the device either supplicant or non-supplicnat. | |||||||||||||
| CalaByodHostProgressStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.6 | SnmpAdminString (SIZE (0..31)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..31)) · read-only · current The status of the BYOD Host. | |||||||||||||
| TalaRedirectByodHostUnpTable | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15 | NA | |||||||||||
table · not-accessible · current This table shows list of BYOD Hosts with restricted and new UNP status. | |||||||||||||
| RalaRedirectByodHostUnpEntry | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1 | NA | |||||||||||
row · not-accessible · current BYOD Client UNP information. | |||||||||||||
| CalaByodClientMacQueryType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.1 | ALADot1xMacQueryType | RO | ||||||||||
column · ALADot1xMacQueryType · read-only · current The type of MAC address whether supplicant or non-supplicant. | |||||||||||||
| CalaByodClientSlotNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.2 | Integer32 (1..16) | RO | ||||||||||
column · Integer32 (1..16) · read-only · current The slot number. | |||||||||||||
| CalaByodClientPortNumber | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.3 | Integer32 (1..48) | RO | ||||||||||
column · Integer32 (1..48) · read-only · current The port number. | |||||||||||||
| CalaByodClientMacAddress | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.4 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current The Client MAc Address which is Index. | |||||||||||||
| CalaByodClientDeviceType | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.5 | ALADot1xDeviceType | RO | ||||||||||
column · ALADot1xDeviceType · read-only · current To find the device either supplicant or non-supplicnat. | |||||||||||||
| CalaByodPreviousUNP | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.6 | SnmpAdminString (SIZE (0..31)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..31)) · read-only · current The UNP assigned to the clinet when BYOD is in progress. | |||||||||||||
| CalaByodNewUNP | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.7 | SnmpAdminString (SIZE (0..31)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..31)) · read-only · current The redirect UNP assigned to client once bYOD complete. | |||||||||||||
| CalaByodCOAStatus | 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.8 | SnmpAdminString (SIZE (0..31)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..31)) · read-only · current BYOD status of each BYOD Host. | |||||||||||||
| NalaIND1Dot1XMIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2 | ||||||||||||
node · current Branch For 802.1X Subsystem Conformance Information. | |||||||||||||
| NalaIND1Dot1XMIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1 | ||||||||||||
node · current Branch For 802.1X Subsystem Units Of Conformance. | |||||||||||||
| GalaDot1xPortLookupGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.2 | ||||||||||||
group · current Collection of 802.1x objects for port lookup. | |||||||||||||
| GalaINDDot1XPolicyGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.3 | ||||||||||||
group · current Collection of 802.1x objects for supplicant and non-supplicant policies. | |||||||||||||
| GalaINDDot1XDeviceStatusGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.4 | ||||||||||||
group · current Collection of 802.1x objects for the status of the devices on an 802.1X enable port.
| |||||||||||||
| GalaDot1xAuthSvrTimeoutGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.5 | ||||||||||||
group · current Collection of 802.1x objects for the Authentication Server Timeout.
| |||||||||||||
| GalaPassthroughConfigGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.6 | ||||||||||||
group · current Status of passthrough for 802.1x and avlan configuration in devices. | |||||||||||||
| GalaDot1xAdminLogoutParamsGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.7 | ||||||||||||
group · current Dot1x Admin Logout Parameters group. | |||||||||||||
| GalaDot1xNonSupplicantEntryGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.8 | ||||||||||||
group · current non 802.1x supplicants learned on 802.1x authenticated ports. | |||||||||||||
| GalaDot1xCportalConfigGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.9 | ||||||||||||
group · current Captive portal Config Group.
| |||||||||||||
| GalaDot1xMacEntryGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.10 | ||||||||||||
group · current Captive portal Config Group. | |||||||||||||
| GalaKerberosPortGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.11 | ||||||||||||
| GalaDot1xCrlUnpStatusGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.12 | ||||||||||||
group · current Status of Current Ingress and Egress BW rate limitation present on 8021x port. | |||||||||||||
| GalaINDDot1XRedirectByodHostGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.13 | ||||||||||||
| GalaINDDot1XRedirectByodHostUnpGroup | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.14 | ||||||||||||
group · current Collection of BYOD clients UNP and BYOD status. | |||||||||||||
| MalaIND1Dot1XMIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.2 | ||||||||||||
compliance · current Compliance statement for Alcatel 802.1x.
| |||||||||||||
Textual conventions
ALADot1xAuthenticationResultINTEGERfail(3)inProgress(1)notApplicable(0)success(2)The result of the authentication. If the ALADot1xAuthenticationType of this device is noAuthentication then this object will return notApplicable. If the authentication has not completed then this object will return inProgress.
ALADot1xAuthenticationTypeINTEGERcaptivePortal(3)dotXAuthentication(1)macAuthentication(2)noAuthentication(0)The type of authentication used
ALADot1xClassificationPolicyTypeINTEGERaaaAuthSvrDownBlock(22)aaaAuthSvrDownUNP(21)aaaAuthSvrDownVpUnp(29)aaaRuleUNP(20)authServerUNP(18)block(5)captivePortalAuthentication(9)captivePortalBlock(13)captivePortalDefaultVlan(11)captivePortalGroupMobility(10)captivePortalUnknown(14)captivePortalUnpAAArule(17)captivePortalUnpAuthSrv(15)captivePortalUnpUsrCfg(16)captivePortalVlanId(12)defaultVlan(4)dotXAuthentication(0)groupMobilityRules(2)internalUseOnlyA(6)internalUseOnlyB(7)internalUseOnlyC(8)macAuthentication(1)userConfigUNP(19)vlanId(3)This policy type is the classification policy used to classify a device onto the system.
ALADot1xDeviceTypeINTEGERnonSupplicant(2)supplicant(1)The type of device. Either supplicant or non-supplicant.
ALADot1xHicFlagINTEGERdisabled(2)enabled(1)Flag to specify whether MAC is classified based on HIC
ALADot1xMacLearntStateINTEGERbridging(0)filtering(1)hicInProgress(2)qmrInProgress(3)The state of MAC address in the system
ALADot1xMacQueryTypeINTEGERall(0)captivePortal(3)nonSupplicant(2)supplicant(1)The query type of MAC address in the system. This query MAC address type is used to specify which type of MAC address to query from the alaDot1xDeviceStatusTable.
AlaPassThroughStatusINTEGERdisabled(2)enabled(1)Admin status
Groups and compliance
- alaDot1xAdminLogoutParamsGroup
- alaDot1xAuthSvrTimeoutGroup
- alaDot1xCportalConfigGroup
- alaDot1xCrlUnpStatusGroup
- alaDot1xMacEntryGroup
- alaDot1xNonSupplicantEntryGroup
- alaDot1xPortLookupGroup
- alaIND1Dot1XMIBCompliances
- alaINDDot1XDeviceStatusGroup
- alaINDDot1XPolicyGroup
- alaINDDot1XRedirectByodHostGroup
- alaINDDot1XRedirectByodHostUnpGroup
- alaKerberosPortGroup
- alaPassthroughConfigGroup