ALCATEL-IND1-CONFIG-MGR-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Configuration Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-CONFIG-MGR-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-CONFIG-MGR-MIB <host> 1.3.6.1.4.1.6486.800.1.2.1.11.1Imports
| ALCATEL-IND1-BASE | softentIND1Confmgr |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalcatelIND1ConfigMgrMIB | 1.3.6.1.4.1.6486.800.1.2.1.11.1 | |||
identity This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
Configuration Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | ||||
| NalcatelIND1ConfigMgrMIBObjects | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1 | |||
node · current Branch For Configuration Manager Subsystem Managed Objects. | ||||
| NconfigManager | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1 | |||
| SconfigFileName | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.1 | DisplayString (SIZE (0..30)) | RW | |
scalar · DisplayString (SIZE (0..30)) · read-write · current The name of the configuration file to be read by the device. The file specified should be present on the device. | ||||
| SconfigFileAction | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Triggers application of the configuration file specified by the configInputFileName. A value of checkSyntax causes configInputFile to be checked for syntax, with no changes to device configuration. A value of checkSyntaxAndApply causes the configInputFile to be applied to the device configuration.A value of none indicates no action has been triggered.
| ||||
| SconfigErrorFileName | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.3 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The name of the file containing the error messages generated by the device during file configuration. | ||||
| SconfigFileStatus | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of most recent application of configuration file to the device.
| ||||
| SconfigFileMode | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The verbose mode displays all configuration commands and errors when the file is applied on the console screen. Ignored unless set from command line interface.
| ||||
| SconfigTimerFileName | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.6 | DisplayString (SIZE (0..30)) | RW | |
scalar · DisplayString (SIZE (0..30)) · read-write · current The name of the configuration file to be read later by the device. | ||||
| SconfigTimerFileTime | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.7 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current The local time when the configuration file
will be read by the device. This object is
only set if the configInputFile must be applied
at a later time.
The following formats are valid:
MM/DD/YYYY hh:mm
MM/DD/YY hh:mm
MM/DD hh:mm - uses current year if
after current date and time,
next year otherwise.
hh:mm - uses today's date if later
than current time,
tommorow's date otherwise.
where
YY - year (0-38,99)
MM - month (1-12)
DD - day (1-31)
hh - hour (0-23)
mm - minute (0-59) | ||||
| SconfigTimerFileStatus | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current status of the ASCII configuration timer.
| ||||
| SconfigTimerClear | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.9 | INTEGER (1) | RW | |
scalar · INTEGER (1) · read-write · current A set of this object causes the ASCII configuration timer to be cleared. | ||||
| SconfigSnapshotFileName | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.10 | DisplayString (SIZE (0..30)) | RW | |
scalar · DisplayString (SIZE (0..30)) · read-write · current The name of the configuration snap-shot file to be generated by the device. | ||||
| SconfigSnapshotAction | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.11 | INTEGER (1) | RW | |
scalar · INTEGER (1) · read-write · current A set of this object causes the configuration snap-shot to be generated by the device. | ||||
| SconfigSnapshotAllSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.12 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes all application configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotVlanSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.13 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Vlan configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotSpanningTreeSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.14 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Spanning Tree configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotQOSSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.15 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes QOS configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotIPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.16 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes IP configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotIPXSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.17 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes IPX configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotIPMSSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.18 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes IPMS configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotAAASelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.19 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes AAA configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotSNMPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes SNMP configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshot8021QSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.21 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes 802.1Q configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotLinkAggregateSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.22 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes link aggregation configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotPortMirrorSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.23 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes port mirroring configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotXIPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.24 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes proprietary inter-switch protocol configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotHealthMonitorSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.25 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes health monitoring configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotBootPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.26 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes bootp configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotBridgeSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.27 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes source-learning configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotChassisSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.28 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes the chassis configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotInterfaceSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.29 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes ethernet interface configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotPolicySelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.30 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes policy manager configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotSessionSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.31 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes the user-session configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotServerLoadBalanceSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.32 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes server load balancing configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotSystemServiceSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.33 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes system services configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotVRRPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.34 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes VRRP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotWebSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.35 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes web manager configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotRIPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.36 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes RIP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotOSPFSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.37 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes OSPF configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotBGPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.38 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes BGP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotIPRMSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.39 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes IPRM routing configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotIPMRSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.40 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes IP multicast routing configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotModuleSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.41 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes module configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigTechSupportLogAction | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.42 | INTEGER | RW | |
scalar · INTEGER · read-write · current A set of this object causes a tech_support.log file to be created containing switch information useful to a technical support group.
| ||||
| SconfigWriteMemory | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.43 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes the entire switch snap-shot configuration to be stored in the boot.cfg file in the working directory. | ||||
| SconfigErrorFileMaximum | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.44 | INTEGER (1..25) | RW | |
scalar · INTEGER (1..25) · read-write · current The maximum number of error files which may be present on a switch. Each time a new error file is created, all but the newest configErrorFileMaxNum error files are deleted. | ||||
| SconfigChangeStatus | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.45 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current state of the running configuration with respect to the saved configuration.
| ||||
| SconfigSnapshotRDPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.46 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes RDP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotIPv6Select | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.47 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes IPv6 configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotRIPngSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.48 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes RIPng configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotAtmSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.49 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes ATM configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED. | ||||
| SconfigSnapshotSonetSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.50 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Sonet configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED. | ||||
| SconfigSnapshotNTPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.51 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes NTP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotPortMappingSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.52 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Port Mapping configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotOSPF3Select | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.53 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes OSPF3 configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigWriteMemoryStatus | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.54 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of most recent wwrite memory action.
| ||||
| SconfigSnapshotStackSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.55 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes STack Manager configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotISISSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.56 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes ISIS configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotEOAMSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.57 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Ethernet OAM configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotUDLDSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.58 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes UDLD configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotNETSECSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.59 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes NETSEC configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotIPsecSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.60 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes IP Security configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotBFDSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.61 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes BFD configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotErpSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.62 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes ERP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotMPLSSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.63 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes MPLS configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotEFMOAMSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.64 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes EFMOAM configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotLBDSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.65 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Loop Back Detection configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotSAASelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.66 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes SAA configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotDhcpSrvSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.67 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes
DHCP Server configuration data to
be included in the snap-shot file generated
by the device. | ||||
| SconfigSnapshotLLDPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.68 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes
LLDP configuration data to
be included in the snap-shot file generated
by the device. | ||||
| SconfigSnapshotLFPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.69 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes
LFP configuration data to
be included in the snap-shot file generated
by the device. | ||||
| SconfigSnapshotDHLSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.70 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes
DHL configuration data to
be included in the snap-shot file generated
by the device. | ||||
| SconfigSnapshotWccpSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.71 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes
WCCP configuration data to
be included in the snap-shot file generated
by the device. | ||||
| SconfigSnapshotPPPOEIASelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.72 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes PPPoE-IA configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotTESTOAMSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.73 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes TESTOAM configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotSIPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.74 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes SIP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotUNPSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.75 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes vNP configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotMultiChassisSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.76 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Multi-Chassis configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotDhcpv6Select | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.77 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Dhcpv6 configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotSspHelperSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.78 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Stack Split-Protection Helper configuration data to be included in the snap-shot file generated by the device. | ||||
| SconfigSnapshotOpenflowSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.79 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Openflow configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotTwampSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.80 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Twamp configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigSnapshotCloudAgentSelect | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.81 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current A set of this object causes Cloud-agent configuration data to be included in the snap-shot file generated by the the device. | ||||
| SconfigWriteMemoryWarning | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.82 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current This is to get the NI slot numbers which have gone down after reboot/takeover to display in warning while issuing write memory from webview. | ||||
| SvirtualChassisTopologyMissingChassisIDs | 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.83 | VirtualChassisTopologyChassisIDs | RO | |
scalar · VirtualChassisTopologyChassisIDs · read-only · current Stack topology change missing Chassis ID bit map. Only the missing slot numbers will be set in this bit map. Default value is empty. | ||||
| NalcatelIND1ConfigMgrMIBConformance | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2 | |||
node · current Branch For Configuration Manager Subsystem Conformance Information. | ||||
| NalcatelIND1ConfigMgrMIBGroups | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1 | |||
node · current Branch For Configuration Manager Subsystem Units Of Conformance. | ||||
| GconfigFileGroup | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1.1 | |||
group · current Collection of objects for file configuration. | ||||
| GconfigTimerFileGroup | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1.2 | |||
group · current Collection of objects for timer file configuration. | ||||
| GconfigSnapshotGroup | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1.3 | |||
group · current Collection of objects for snapshot configuration.
| ||||
| GconfigTechSupportLogGroup | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1.4 | |||
group · current Collection of objects for technical support log file.
| ||||
| GconfigWriteMemoryGroup | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1.5 | |||
| GconfigMgrTrapsGroup | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1.6 | |||
| GconfigMgrTrapReasonGroup | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.1.7 | |||
group · current Configurations are saved successfully by write memory command. | ||||
| NalcatelIND1ConfigMgrMIBCompliances | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.2 | |||
node · current Branch For Configuration Manager Subsystem Compliance Statements. | ||||
| MalcatelIND1ConfigMgrMIBCompliance | 1.3.6.1.4.1.6486.800.1.2.1.11.1.2.2.1 | |||
compliance · current Compliance statement for Configuration Manager Subsystem. | ||||
| NalcatelIND1ConfigMgrTraps | 1.3.6.1.4.1.6486.800.1.2.1.11.1.3 | |||
node · current Branch For Configuration Manager Subsystem Trap Information. | ||||
| NalcatelIND1ConfigMgrTrapsRoot | 1.3.6.1.4.1.6486.800.1.2.1.11.1.3.0 | |||
| !configSaveSucceededTrap | 1.3.6.1.4.1.6486.800.1.2.1.11.1.3.0.1 | |||
notification · current The save config succeeded event is generated when the saving of configuration finishes without errors. | ||||
| NalcatelIND1ConfigMgrTrapsObj | 1.3.6.1.4.1.6486.800.1.2.1.11.1.3.1 | |||
| SconfigSaveSucceededTrapReason | 1.3.6.1.4.1.6486.800.1.2.1.11.1.3.1.1 | SnmpAdminString | AN | |
scalar · SnmpAdminString · accessible-for-notify · current The reason of trap for successful execution of write memory command | ||||
Textual conventions
VirtualChassisTopologyChassisIDsBitschassis1(0)chassis2(1)chassis3(2)chassis4(3)chassis5(4)chassis6(5)chassis7(6)chassis8(7)This bit map object specifies the Chassis IDs of the Virtual Chassis related to a specific group. It could be used to list Chassis IDs that make up the VC, or Chassis IDs missing from the VC. The actual context will determine the contents.
Traps / Notifications
- configSaveSucceededTrap
1.3.6.1.4.1.6486.800.1.2.1.11.1.3.0.1