ALCATEL-IND1-CHASSIS-MIB
Alcatel-Lucent EnterpriseThis module describes an authoritative enterprise-specific Simple
etwork Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line, this is the Chassis Supervision
Chassis MIB
for managing physical chassis objects not covered in the IETF
Entity MIB (rfc 2737).
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDEsnmptranslate -m ALCATEL-IND1-CHASSIS-MIB -Tpsnmpwalk -v2c -c <community> -m ALCATEL-IND1-CHASSIS-MIB <host> 1.3.6.1.4.1.6486.800.1.1.1.3.1Imports
| ALCATEL-IND1-BASE | chassisTraps, hardentIND1Chassis, hardentIND1Physical |
|---|---|
| ENTITY-MIB | PhysicalIndex, entPhysicalIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NalcatelIND1ChassisPhysMIBObjects | 1.3.6.1.4.1.6486.800.1.1.1.1.1 | ||||||||||||
node · current Branch For Chassis Supervision Chassis Physical MIB Subsystem Managed Objects. | |||||||||||||
| TchasEntPhysicalTable | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1 | NA | |||||||||||
table · not-accessible · current This table contains one row per physical entity. It is an extension for the entity physical table (rfc 2737) that is instantiated for every physical entity object. The fields are not always significant for every object. | |||||||||||||
| RchasEntPhysicalEntry | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1 | NA | |||||||||||
| CchasEntPhysAdminStatus | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current All modules (even empty slots) are in unknown state when the chassis
first powers up.
Chassis status possible value:
powerOn <=> powered up
Control Module possible value:
powerOn <=> CM up and running
reset <=> CM reset
takeover <=> Secondary CM takes over
resetAll <=> resets the whole switch
NI status possible value:
powerOn <=> NI is either powered (up or down) or waiting to be powered
whenever more power is available. This admin status has not full meaning
without chasEntPhysOperStatus
powerOff <=> NI down and unpowered and NI will not be powered until user
requests it, a failover happens or a reboot happens
reset <=> NI reset
FABRIC status possible value:
powerOn <=> FABRIC is powered
powerOff <=> FABRIC is unpowered
standby <=> FABRIC is powered and requested to be redundant (inactive)
Daughter board status possible value:
powerOn <=> DB up and running
reset <=> DB reset (TO BE CONFIRMED)
Power supply status possible value:
powerOn <=> PS up
| |||||||||||||
| CchasEntPhysOperStatus | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.2 | INTEGER | RO | up(1) | |||||||||
column · INTEGER · read-only · current All modules (even empty slots) are in unknown state when the chassis
first powers up.
Chassis status possible value :
up <=> powered up
Control Module possible value :
notPresent <=> CM not present
up <=> CM up and running
down <=> CM down and powered
secondary <=> CM in secondary mode and running
NI status possible value :
notPresent <=> NI not present
up <=> NI up and running
down <=> NI down and powered
unpowered <=> NI unpowered because there is not enough power in the system
(chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF
(chasEntPhysAdminStatus = powerOff). This operational status has
not full meaning without chasEntPhysAdminStatus
Fabric status possible value :
master <=> up and acting as master
up <=> up and acting as slave
secondary <=> secondary mode for redundancy
Daughter board status possible value :
notPresent <=> DB not present
up <=> DB up and running
down <=> DB down and powered
Power supply status possible value :
notPresent <=> PS not present
up <=> PS up
| |||||||||||||
| CchasEntPhysLedStatus | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.3 | Bits | RO | deprecated | |||||||||
column · Bits · read-only · deprecated This object has been deprecated because the other enumerated objects can provide the same information. A get to this object will return 0. The status of each of the LEDs of this module. Fuji CFM: [31:30] BPSU amber 00=off 01=on 10=reserved 11=blinking [29:28] PSU green 00=off 01=on 10=reserved 11=blinking [27:26] PSU amber 00=off 01=on 10=reserved 11=blinking [25:24] PSU green 00=off 01=on 10=reserved 11=blinking [23:22] Fan amber 00=off 01=on 10=reserved 11=blinking [21:20] Fan green 00=off 01=on 10=reserved 11=blinking [19:18] Temp amber 00=off 01=on 10=reserved 11=blinking [17:16] Temp green 00=off 01=on 10=reserved 11=blinking [15:14] Fabric amber 00=off 01=on 10=reserved 11=blinking [13:12] Fabric green 00=off 01=on 10=reserved 11=blinking [11:10] Control amber 00=off 01=on 10=reserved 11=blinking [9:8] Control green 00=off 01=on 10=reserved 11=blinking [7:6] OK2 amber 00=off 01=on 10=reserved 11=blinking [5:4] OK2 green 00=off 01=on 10=reserved 11=blinking [3:2] OK1 amber 00=off 01=on 10=reserved 11=blinking [1:0] OK1 green 00=off 01=on 10=reserved 11=blinking Falcon CMM: [11] Fan 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved Eagle CMM: [17:16] Fan 3 (rear) 00=amber 01=green 10=blink 11=reserved [15:14] Fan 2 (top right) 00=amber 01=green 10=blink 11=reserved [13:12] Fan 1 (top left) 00=amber 01=green 10=blink 11=reserved [11] Status 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved Hawk Stack: [19] fanGroup 1=Green (ok) 0=amber (fail) [18] internalPS 1=Green (ok) 0=amber (fail) [11] backupPS 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved NI: [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved FABRIC (Eagle Only): [7:6] OK2 Yellow LED 01=on 00=off 10=blink 11=reserved [5:4] OK2 Green LED 01=on 00=off 10=blink 11=reserved [3:2] OK1 Yellow LED 01=on 00=off 10=blink 11=reserved [1:0] OK1 Green LED 01=on 00=off 10=blink 11=reserved NOTE: Due to European regulation, the LEDs will NEVER be illuminated RED! They in fact will be either green OR amber.
| |||||||||||||
| CchasEntPhysPower | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.4 | INTEGER (0..65535) | RO | ||||||||||
column · INTEGER (0..65535) · read-only · current This value is only applicable to the NI, PS and Control Modules. It corresponds to a a static value for the power consumption of an NI module or Control Module. This value is in Watts. | |||||||||||||
| CchasEntPhysModuleType | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.5 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current This object is the unique Module Type or ID from the entities eeprom. This value is guarrantteed to be unique to each type of Module. This value is only intended for Alcatel internal use. | |||||||||||||
| CchasEntPhysMfgDate | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.6 | SnmpAdminString (SIZE (0..11)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..11)) · read-only · current This object contains the manufacturing date of the entity. Its format is mmm dd yyyy : NOV 27 2001. | |||||||||||||
| CchasEntPhysPartNumber | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.7 | SnmpAdminString (SIZE (0..16)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..16)) · read-only · current This object contains the Alcatel Part Number for the entity. This value is used to identify what is needed when placing orders with Alcatel. | |||||||||||||
| CchasEntPhysLedStatusOk1 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.8 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis Management Module (CMM) front panel LED OK1 status indication | |||||||||||||
| CchasEntPhysLedStatusOk2 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.9 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis Management Module (CMM) front panel LED OK2 status indication | |||||||||||||
| CchasEntPhysLedStatusPrimaryCMM | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.10 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis Management Module (CMM) front panel LED Primary chassis indication | |||||||||||||
| CchasEntPhysLedStatusSecondaryCMM | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.11 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis Management Module (CMM) front panel LED Secondary chassis indication | |||||||||||||
| CchasEntPhysLedStatusTemperature | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.12 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis Management Module (CMM) front panel LED temperature status indication | |||||||||||||
| CchasEntPhysLedStatusFan | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.13 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current For Hawk stacks used as a fan group status LED. For eagle CMM's user instead: Fan 1 (top left), Fan 2 (top right), Fan 3 (rear) | |||||||||||||
| CchasEntPhysLedStatusFan1 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.14 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis fan status, Eagle (top left), Fuji (top right) | |||||||||||||
| CchasEntPhysLedStatusFan2 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.15 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis fan status, Eagle (top right), Fuji (middle right) | |||||||||||||
| CchasEntPhysLedStatusFan3 | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.16 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis fan status, Eagle (rear), Fuji (bottom right) | |||||||||||||
| CchasEntPhysLedStatusBackupPS | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.17 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis backup power supply status indication | |||||||||||||
| CchasEntPhysLedStatusInternalPS | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.18 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis internal power supply status indication | |||||||||||||
| CchasEntPhysLedStatusControl | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.19 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis control status | |||||||||||||
| CchasEntPhysLedStatusFabric | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.20 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis Management Module (CMM) Fabric status indication | |||||||||||||
| CchasEntPhysLedStatusPSU | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.21 | ChasEntPhysLed | RO | ||||||||||
column · ChasEntPhysLed · read-only · current Chassis Power Supply Unit status indication | |||||||||||||
| CchasEntPhysAsicRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.22 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the ASIC revision Number of the ni entity | |||||||||||||
| CchasEntPhysCpldRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.23 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the CPLD revision Number of the ni entity | |||||||||||||
| CchasEntPhysDefaultMinibootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.24 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the default miniboot version Number of the ni entity | |||||||||||||
| CchasEntPhysBackUpMinibootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.25 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the backup miniboot version Number of the ni entity | |||||||||||||
| CchasEntPhysBootromRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.26 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the bootrom version Number of the ni entity | |||||||||||||
| CchasEntPhysNiNum | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.27 | INTEGER (0..65535) | RO | 0 | |||||||||
| CchasEntPhysGbicNum | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.28 | INTEGER (0..65535) | RO | 0 | |||||||||
| CchasEntPhysWaveLen | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.29 | INTEGER (0..65535) | RO | ||||||||||
column · INTEGER (0..65535) · read-only · current This object contains the wave length of a SFP device | |||||||||||||
| CchasEntPhysUbootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.30 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the uboot version Number of the ni entity | |||||||||||||
| CchasEntPhysUbootMinibootRev | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.31 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the uboot miniboot version Number of the ni entity | |||||||||||||
| CchasEntPhysMacAddress | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.32 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current This object contains the MAC address of the ni entity | |||||||||||||
| CchasEntPhysPoeSwVersion | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.33 | SnmpAdminString (SIZE (0..16)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..16)) · read-only · current This object contains the POE SW Revision of the ni entity | |||||||||||||
| CchasEntPhysC20LFailCont | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.34 | INTEGER (0..65535) | RO | ||||||||||
column · INTEGER (0..65535) · read-only · current This object contains the C20L upgrade failure count of the ni entity | |||||||||||||
| CchasEntPhysCpuModel | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.35 | SnmpAdminString (SIZE (0..32)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-only · current This object contains the model description of the cmm/ni cpu | |||||||||||||
| CchasEntPhysPowerType | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.36 | ChasEntPhysPowerType | RO | ||||||||||
column · ChasEntPhysPowerType · read-only · current This object specifies the type(AC/DC) of power supply. | |||||||||||||
| CchasEntPhysPowerControlChecksum | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.37 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current This object specifies the power control checksum. | |||||||||||||
| CchasEntPhysDdmStatus | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.38 | INTEGER (1..2) | RO | ||||||||||
column · INTEGER (1..2) · read-only · current This object contains the Ddm Status of a SFP device | |||||||||||||
| CchasEntPhysParityError | 1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.39 | INTEGER | RO | obsolete | |||||||||
column · INTEGER · read-only · obsolete Processor level parity error
| |||||||||||||
| NalcatelIND1ChassisPhysMIBConformance | 1.3.6.1.4.1.6486.800.1.1.1.1.2 | ||||||||||||
node · current Branch For Chassis Supervision Chassis Physical MIB Subsystem Conformance Information. | |||||||||||||
| NalcatelIND1ChassisPhysMIBGroups | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1 | ||||||||||||
node · current Branch For Chassis Supervision Chassis Physical MIB Subsystem Units Of Conformance. | |||||||||||||
| GchasEntPhysicalGroup | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1.1 | ||||||||||||
group · current Chassis (inclosure) Entity Physical Group.
| |||||||||||||
| GchassisPhysNotificationGroup | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1.2 | ||||||||||||
group · current Chassis Supervision Physical Notification Group. | |||||||||||||
| GchasSupervisionFlashMemGroup | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1.3 | ||||||||||||
group · current chassis Supervision Flash Mem group. | |||||||||||||
| GalcatelIND1ChassisSupervisionRfsGroup | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1.4 | ||||||||||||
group · current chassis Supervision RFS commands.
| |||||||||||||
| GchasSupervisionRfsDfGroup | 1.3.6.1.4.1.6486.800.1.1.1.1.2.1.5 | ||||||||||||
group · current File system use.
| |||||||||||||
| NalcatelIND1ChassisPhysMIBCompliances | 1.3.6.1.4.1.6486.800.1.1.1.1.2.2 | ||||||||||||
node · current Branch For Chassis Supervision Chassis Physical MIB Subsystem Compliance Statements. | |||||||||||||
| MalcatelIND1ChassisPhysMIBCompliance | 1.3.6.1.4.1.6486.800.1.1.1.1.2.2.1 | ||||||||||||
compliance · current Compliance statement for Chassis Supervision Physical. | |||||||||||||
| IalcatelIND1ChassisMIB | 1.3.6.1.4.1.6486.800.1.1.1.3.1 | ||||||||||||
identity This module describes an authoritative enterprise-specific Simple
etwork Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line, this is the Chassis Supervision
Chassis MIB
for managing physical chassis objects not covered in the IETF
Entity MIB (rfc 2737).
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE | |||||||||||||
| NalcatelIND1ChassisMIBObjects | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1 | ||||||||||||
node · current Branch For Chassis Supervision Chassis MIB Subsystem Managed Objects. | |||||||||||||
| TchasControlModuleTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1 | NA | |||||||||||
table · not-accessible · current This table contains one row for the primary control module. | |||||||||||||
| RchasControlModuleEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1 | NA | |||||||||||
row · not-accessible · current Information about the primary control module. This table is an extension of the entity physical table but this class is instanciated only for a the primary control module that has a particular Index.
| |||||||||||||
| CchasControlRunningVersion | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.1 | INTEGER | RO | working(2) | |||||||||
column · INTEGER · read-only · current Identification of the Running Version (or Running Configuration) for the control module. Note that the Running Version value of (1) unknown, (2) working, or (3) certified is returned.
Example values from LibreNMS test devices
| |||||||||||||
| CchasControlActivateTimeout | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.2 | INTEGER (0..900) | RW | 0 | |||||||||
column · INTEGER (0..900) · read-write · current This value is in seconds. It represents how much time before the switch automatically falls back to the certified version. This value is set via the Activate(reload working) cli command. An Activate reboot must be initiated via the primary CMM and that the timeout value can be accessed via user interface to the primary CMM only. After the Activate reboot has been initiated, a timeout will occur (i.e., an Activate Timeout) at the timeout value specified by the user. If a reboot cancel has not been received prior to the timeout expiration, the primary CMM will automatically reboot (i.e., re-reboot) using the certified configuration. This ensures that an automatic backup reboot is available using the certified configuration in the event that the user is unable to interface with primary CMM as a result of the attempted Activate reboot. If the Activate reboot is successful, the user cancels the backup reboot via the normal reboot cancellation process (i.e., a zero value is written for the object chasControlDelayedRebootTimer). Example values from LibreNMS test devices
| |||||||||||||
| CchasControlVersionMngt | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.3 | INTEGER | RW | notSignificant(1) | |||||||||
column · INTEGER · read-write · current For the primary this means:
notSignificant - No command applied.
certifySynchro - Copy the file from the working to the certified
directory and from the primary to the secondary
(reboot of the secondary).
certifyNoSynchro - Copy the file from the working to the certified
directory.
flashSynchro - Copy the file from the primary to the secondary
(reboot of the secondary).
restore - Copy the file from the certified directory to the
working directory.
activate - Reload from the working directory. Activate can be
scheduled.
Example values from LibreNMS test devices
| |||||||||||||
| CchasControlDelayedActivateTimer | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.4 | Unsigned32 (0..31622400) | RW | 0 | |||||||||
column · Unsigned32 (0..31622400) · read-write · current Timer value in seconds used to initiate a delayed activate of the primary
CMM. Writing this object to a non-zero value results in CMM reboot of the
working directory following expiration of the specified activate timer delay.
Writing this object to zero results in an immediately activate process.
It is now adjusted to wait a maximum of 366 days.Example values from LibreNMS test devices
| |||||||||||||
| CchasControlCertifyStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.5 | INTEGER | RO | certified(3) | |||||||||
column · INTEGER · read-only · current Returned value indicates if the control module has been certified (that is the working directory matches the certified directory)
Example values from LibreNMS test devices
| |||||||||||||
| CchasControlSynchronizationStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.6 | INTEGER | RO | synchronized(4) | |||||||||
column · INTEGER · read-only · current Returned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s) if present). Returned value is monoControlModule when no other control module is present.
Example values from LibreNMS test devices
| |||||||||||||
| CchasControlAcrossCmmWorkingSynchroStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.7 | INTEGER | RO | yes(4) | |||||||||
column · INTEGER · read-only · current Returned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if present)
Example values from LibreNMS test devices
| |||||||||||||
| CchasControlAcrossCmmCertifiedSynchroStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.8 | INTEGER | RO | yes(4) | |||||||||
column · INTEGER · read-only · current Returned value indicates if the /certified has been synchronized across the CMMs if present)
Example values from LibreNMS test devices
| |||||||||||||
| TchasControlRedundantTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2 | NA | |||||||||||
table · not-accessible · current This table contains one row per control module. There is always at least one control module in the system. | |||||||||||||
| RchasControlRedundantEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1 | NA | |||||||||||
row · not-accessible · current Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index.
| |||||||||||||
| CchasControlNumberOfTakeover | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current This object is a count of the number of times the control module has changed from primary to secondary mode as a result of a Takeover. Note that this object can be accessed via user interface to either the primary or secondary CMM. The value returned is the number of times that the interfacing control module (either primary or secondary CMM) has changed from primary to secondary mode. This value does not reflect the total number of CMM Takeovers for the switch. To get the total number of Takeovers for the switch, it is necessary to read this value via user interface to each control module independently. | |||||||||||||
| CchasControlDelayedRebootTimer | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.2 | Unsigned32 (0..31622400) | RW | ||||||||||
column · Unsigned32 (0..31622400) · read-write · current Timer value (in seconds) used to initiate a delayed reboot of the primary or secondary CMM using the certified configuration. Writing this object to a non-zero value results in a CMM reboot following expiration of the specified reset timer delay. Writing this object to zero results in cancellation of a pending CMM delayed reboot. It is now adjusted to wait a maximum of 366 days. | |||||||||||||
| TchasChassisTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3 | NA | |||||||||||
table · not-accessible · current This table contains one row per chassis. There is always at least one chassis or many like for stackable product. | |||||||||||||
| RchasChassisEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1 | NA | |||||||||||
row · not-accessible · current Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index.
| |||||||||||||
| CchasFreeSlots | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.1 | Unsigned32 (0..18) | RO | 5 | |||||||||
column · Unsigned32 (0..18) · read-only · current The number of free NI front panel slots. Example values from LibreNMS test devices
| |||||||||||||
| CchasPowerLeft | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.2 | INTEGER (-100000..100000) | RO | 0 | |||||||||
column · INTEGER (-100000..100000) · read-only · current The power still available on the chassis in Watts. Example values from LibreNMS test devices
| |||||||||||||
| CchasNumberOfResets | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.3 | Counter32 | RO | 96 | |||||||||
column · Counter32 · read-only · current This object is a count of the number of times this station has been reset since a cold-start. Example values from LibreNMS test devices
| |||||||||||||
| CchasHardwareBoardTemp | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.4 | INTEGER (0..200) | RO | 43 | |||||||||
column · INTEGER (0..200) · read-only · current This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for this chassis. This temperature is what is used for comparing to the threshold and determining whether the value is in range. | |||||||||||||
| CchasHardwareCpuTemp | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.5 | INTEGER (0..200) | RO | 0 | |||||||||
column · INTEGER (0..200) · read-only · current This object indicates the current output of the SPARC Temperature Sensor (degrees Centigrade) for this chassis. This object is not applicable for Hawk and 0 is returned Example values from LibreNMS test devices
| |||||||||||||
| CchasTempRange | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.6 | INTEGER | RO | underThreshold(3) | |||||||||
column · INTEGER · read-only · current Temp Range is the value of the temperature sensor for the chassis. The Temp Range value reflects the temperature of the chassis relative to the Temp Threshold value (i.e., over vs. under the threshold).
Example values from LibreNMS test devices
| |||||||||||||
| CchasTempThreshold | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.7 | INTEGER (1..150) | RW | 85 | |||||||||
column · INTEGER (1..150) · read-write · current This object is the threshold temperature in degrees Celsius for the chassis. Temp Threshold is the chassis temperature point at which, when reached due to an ascending or descending temperature transition, a temperature notification is provided to the user. When this threshold is exceeded, we start sending traps and other operator notification. Example values from LibreNMS test devices
| |||||||||||||
| CchasDangerTempThreshold | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.8 | INTEGER (30..150) | RO | 95 | |||||||||
column · INTEGER (30..150) · read-only · current This Threshold is a second one which is hardcoded. When the Chassis Exceeds this value it starts shutting down NIs. This value will be set by the factory and not changeable. Example values from LibreNMS test devices
| |||||||||||||
| CchasPrimaryPhysicalIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.9 | INTEGER (1..255) | RO | 65 | |||||||||
column · INTEGER (1..255) · read-only · current This value holds the Entity Table Physical Index for the Control Module that is currently primary. This is to allow snmp managers to determine which Control Module is currently primary so it knows what entry in the chasControlModuleTable to access for setting the chasControlVersionMngt values for controling the switch. Example values from LibreNMS test devices
| |||||||||||||
| TchasSupervisionRfsLsTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4 | NA | |||||||||||
table · not-accessible · current This table contains a list of file on the remote chassis per directory. | |||||||||||||
| RchasSupervisionRfsLsEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1 | NA | |||||||||||
row · not-accessible · current Information about a remote file. A row in this table contains a file per directory per chassis | |||||||||||||
| CchasSupervisionRfsLsFileIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.1 | INTEGER (1..100) | RO | ||||||||||
column · INTEGER (1..100) · read-only · current This value holds file Index for the RFS LS table. | |||||||||||||
| CchasSupervisionRfsLsSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Slot where remote file is located. | |||||||||||||
| CchasSupervisionRfsLsDirName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.3 | DisplayString (SIZE (0..255)) | RO | ||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The remote directory name where remote file is located in | |||||||||||||
| CchasSupervisionRfsLsFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.4 | DisplayString (SIZE (0..33)) | RO | ||||||||||
column · DisplayString (SIZE (0..33)) · read-only · current The file name of remote file | |||||||||||||
| CchasSupervisionRfsLsFileType | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The Type of a remote file
| |||||||||||||
| CchasSupervisionRfsLsFileSize | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current size of this remote file | |||||||||||||
| CchasSupervisionRfsLsFileAttr | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current attributes of this remote file
| |||||||||||||
| CchasSupervisionRfsLsFileDateTime | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.8 | DisplayString (SIZE (0..16)) | RO | ||||||||||
column · DisplayString (SIZE (0..16)) · read-only · current the modification date and time of a remote file | |||||||||||||
| NalcatelIND1ChassisSupervisionRfsCommands | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5 | ||||||||||||
node · current Branch For Chassis Supervision RFS commands. For rrm command the Slot, Command and SrcFileName are mandatory. For rcp command the Slot, Command, SrcFileName and DestFileName are mandatory. For rdf command the Slot and Command are mandatory | |||||||||||||
| SchasSupervisionRfsCommandsSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.1 | Unsigned32 | RC | ||||||||||
scalar · Unsigned32 · read-create · current Slot where RFS command should be executed. | |||||||||||||
| SchasSupervisionRfsCommandsCommand | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.2 | INTEGER | RC | ||||||||||
scalar · INTEGER · read-create · current This object identifies which of the above Actions is to be
performed. The commands are as follows:
- rrm Remote file remove
- rcp Remote file copy
- rls Remote directory listing
- rdf Remote flash disk space free
| |||||||||||||
| SchasSupervisionRfsCommandsSrcFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.3 | DisplayString (SIZE (0..255)) | RC | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-create · current The remote file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rrm or rcp. | |||||||||||||
| SchasSupervisionRfsCommandsDestFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.4 | DisplayString (SIZE (0..255)) | RC | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-create · current The destination file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rcp. | |||||||||||||
| SchasSupervisionRfsCommandsRlsDirName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.5 | DisplayString (SIZE (0..255)) | RC | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-create · current The remote directory name where remote file is located in. This is used when command set to rls. | |||||||||||||
| SchasSupervisionRfsCommandsRlsFileName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.6 | DisplayString (SIZE (0..33)) | RC | ||||||||||
scalar · DisplayString (SIZE (0..33)) · read-create · current The remote file name where remote file is located in. This is used when command set to rls. | |||||||||||||
| SchasSupervisionRfsCommandsProcessingState | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current command executing state for the previous set operation.
| |||||||||||||
| SchasSupervisionRfsCommandsStatusCode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current command completetion status error code.
| |||||||||||||
| TchasControlReloadStatusTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6 | NA | |||||||||||
table · not-accessible · current Table containing reload status of each network interface slot or stack module | |||||||||||||
| RchasControlReloadEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1 | NA | |||||||||||
| CchasControlReloadIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.1 | INTEGER (1..16) | NA | ||||||||||
column · INTEGER (1..16) · not-accessible · current Entry of a network interface reload status | |||||||||||||
| CchasControlReloadStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Returned value indicates if the network interface module is enabled or disabled for reload.
| |||||||||||||
| NchasGlobalControl | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7 | ||||||||||||
| SchasGlobalControlDelayedResetAll | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.1 | INTEGER (-1..65535) | RW | ||||||||||
scalar · INTEGER (-1..65535) · read-write · current This object is used to schedule a delayed reset all action. If set to -1 - cancel the timer, 0 - reset all immediately, any other value will start counting down the time until reset. | |||||||||||||
| SchasGlobalControlLongCommand | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object is used to indicate whether a long-term action is in progress, and if so, what the action is.
| |||||||||||||
| SchasGlobalControlLongCommandStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object it indicates the final disposition of the most recent long-term action.
| |||||||||||||
| TchasSupervisionRfsDfTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8 | NA | |||||||||||
table · not-accessible · current This table contains information about file system size and use. | |||||||||||||
| RchasSupervisionRfsDfEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1 | NA | |||||||||||
row · not-accessible · current This entry contains information about file system size and use. | |||||||||||||
| CchasSupervisionRfsDfSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current CMM Slot where flash space is evaluated. Slot index 1-16 will return slot 1-16 flash drive information. Slot index 17-32 will return slot 1-16 uflash drive information.
| |||||||||||||
| CchasSupervisionRfsDfFlashFree | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number bytes free on the file system. | |||||||||||||
| CchasSupervisionRfsDfFlashSize | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of total bytes on the file system. | |||||||||||||
| TchasSupervisionFlashMemTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9 | NA | |||||||||||
table · not-accessible · current This table contains the systems flash memory information. | |||||||||||||
| RchasSupervisionFlashMemEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1 | NA | |||||||||||
row · not-accessible · current This contains one entry for the flash memory table.
| |||||||||||||
| CchasSupervisionSlot | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current CMM Slot where flash space is evaluated. | |||||||||||||
| CchasSupervisionFlashSize | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Flash memory size. | |||||||||||||
| CchasSupervisionFlashFree | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number bytes free on file system. | |||||||||||||
| CchasSupervisionFlashUsed | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.4 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current A rounded up percentage of Flash Memory used. | |||||||||||||
| TchasSupervisionCmmCertifiedTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10 | NA | |||||||||||
table · not-accessible · current This table contains... | |||||||||||||
| RchasSupervisionCmmCertifiedEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1 | NA | |||||||||||
| CchasSupervisionCmmNum | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current CMM Slot where /certified directory is evaluated. | |||||||||||||
| CchasSupervisionCmmCertifiedStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the CMM certified directory - certified or not.
| |||||||||||||
| TalaChasEntPhysFanTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11 | NA | |||||||||||
table · not-accessible · current This table contains one row per physical fan entity. | |||||||||||||
| RalaChasEntPhysFanEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1 | NA | |||||||||||
row · not-accessible · current Information about a particular fan in a chassis physical entity. | |||||||||||||
| CalaChasEntPhysFanLocalIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.1 | INTEGER (1..65535) | NA | ||||||||||
column · INTEGER (1..65535) · not-accessible · current Index to a chassis fan entity | |||||||||||||
| CalaChasEntPhysFanStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.2 | INTEGER | RO | running(2) | |||||||||
column · INTEGER · read-only · current Chassis fan operational status
Example values from LibreNMS test devices
| |||||||||||||
| SalaChasHashMode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When set to brief, Hash mode is enabled. When set to Extended, Hash mode is disabled.
| |||||||||||||
| SalaChasUdpTcpPortMode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The control is used to enable or disable UDP TCP port hashing. This option is applicable only when Hash mode is set to disabled (i.e. extended)
| |||||||||||||
| SalaChasNonUCHashControl | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This control is used to enable/disable Load balance for non unicast traffic.
| |||||||||||||
| SalaChasIssuForStackablesStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.15 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object contains the status of ISSU. Enabled: Issu is in progress Disabled: Issu has not been started yet Aborted: Issu was aborted Successfull: ISSU was successfully completed
| |||||||||||||
| SalaChasIssuForStackablesSlotsUpgraded | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.16 | DisplayString (SIZE (0..31)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..31)) · read-only · current This object contains the slot numbers that have been upgraded by ISSU. | |||||||||||||
| SalaChasIssuForStackablesSlotInProgress | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.17 | INTEGER (1..8) | RO | ||||||||||
scalar · INTEGER (1..8) · read-only · current This object contains the slot number for which upgradation is in progress. | |||||||||||||
| SalaChasIssuForStackablesSlotsLeft | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.18 | DisplayString (SIZE (0..31)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..31)) · read-only · current This object contains the slot numbers for which upgradation is still left. | |||||||||||||
| SalaChasFdbHashMode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current when set to xor, the hash configuration mode is set to default xor-mode. when set to crc, the hash configuration mode is set to crc-mode.
| |||||||||||||
| SalaChasNonUCHashMode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When set to brief, Hashing is based on SIP. When set to normal, Hashing is based on SIP and DIP. When set to Extended, Hashing is based on SIP, DIP and Mode port.
| |||||||||||||
| SalaChasBpsUpdateFirmware | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.22 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is used to start BPS firmware update.
| |||||||||||||
| SalaChasBpsMode | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object is only applicable to BPS .Value is used to specify current Mode of switch.
| |||||||||||||
| SalaChasBpsSystemTotalAvailablePower | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.24 | Integer32 (0..900) | RO | ||||||||||
scalar · Integer32 (0..900) · read-only · current This value is only applicable to the BPS Module. It corresponds to system total power available on BPS This value is in Watts. | |||||||||||||
| SalaChasBpsSystemTotalAllocation | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.25 | Integer32 (0..900) | RO | ||||||||||
scalar · Integer32 (0..900) · read-only · current This value is only applicable to the BPS Modules. It corresponds to total system power allocated by BPS This value is in Watts. | |||||||||||||
| SalaChasBpsPoeTotalAvailablePower | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.26 | Integer32 (0..6000) | RO | ||||||||||
scalar · Integer32 (0..6000) · read-only · current This value is only applicable to the BPS Modules. It corresponds to system total power available on BPS This value is in Watts. | |||||||||||||
| SalaChasBpsPoeTotalAllocation | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.27 | Integer32 (0..6000) | RO | ||||||||||
scalar · Integer32 (0..6000) · read-only · current This value is only applicable to the Bps Modules. It corresponds to total POE power allocated by BPS This value is in Watts. | |||||||||||||
| SalaChasBpsCpldRev | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.28 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the CPLD revision Number of the BPS | |||||||||||||
| SalaChasBpsMmcuRev | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.29 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the MMCU revision Number of the BPS | |||||||||||||
| SalaChasBpsCmcuRev | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.30 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..14)) · read-only · current This object contains the CMCU revision Number of the BPS | |||||||||||||
| TalaChasBpsTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31 | NA | |||||||||||
table · not-accessible · current This table contains BPS connector priority for each slot | |||||||||||||
| RalaChasBpsEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1 | NA | |||||||||||
row · not-accessible · current Information about bps connector priority for each slot
| |||||||||||||
| CalaChasBpsNiNum | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.1 | Unsigned32 (1..8) | NA | ||||||||||
column · Unsigned32 (1..8) · not-accessible · current Numbers allocated for the stack NIs as follows: - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable | |||||||||||||
| CalaChasBpsConnectorPriority | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.2 | Unsigned32 (1..8) | RW | ||||||||||
column · Unsigned32 (1..8) · read-write · current This object specifies the bps connector priority. | |||||||||||||
| CalaChasBpsConnectorNum | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.3 | SnmpAdminString (SIZE (0..14)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..14)) · read-only · current This object specifies the bps connector num. | |||||||||||||
| TalaChasBpsPowerSupplyTable | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32 | NA | |||||||||||
table · not-accessible · current This table contains BPS power supplies details | |||||||||||||
| RalaChasBpsPowerSupplyEntry | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1 | NA | |||||||||||
row · not-accessible · current Information about a particular BPS power supply | |||||||||||||
| CalaChasBpsPowerSupplyIndex | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.1 | Unsigned32 (1..5) | NA | ||||||||||
column · Unsigned32 (1..5) · not-accessible · current This value hold BPS power power supply Index | |||||||||||||
| CalaChasBpsPowerSupplyName | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.2 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current This object hold name of BPS power supply | |||||||||||||
| CalaChasBpsPowerSupplyDescr | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.3 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current This object hold description of BPS power supply | |||||||||||||
| CalaChasBpsPowerSupplyModuleType | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.4 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current This object is unique module Type or ID from BPS entities eeprom | |||||||||||||
| CalaChasBpsPowerSupplyPartNumber | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.5 | SnmpAdminString (SIZE (0..16)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..16)) · read-only · current This object contains the BPS power supply Part Number | |||||||||||||
| CalaChasBpsPowerSupplyHardwareRev | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.6 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current The vendor-specific hardware revision string for the BPS power supplies Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner. If no specific hardware revision string is associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string. | |||||||||||||
| CalaChasBpsPowerSupplySerialNum | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.7 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-write · current The vendor-specific serial number string for the BPS power supplies | |||||||||||||
| CalaChasBpsPowerSupplyMfgDate | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.8 | SnmpAdminString (SIZE (0..11)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..11)) · read-only · current This object contains the manufacturing date of the BPS power supplies . Its format is mmm dd yyyy : NOV 27 2012. | |||||||||||||
| CalaChasBpsPowerSupplyOperStatus | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Oper status of BPS power supply
| |||||||||||||
| CalaChasBpsPowerSupplyPowerProv | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.10 | Integer32 (0..2000) | RO | ||||||||||
column · Integer32 (0..2000) · read-only · current It corresponds to max power of BPS power supply. This value is in Watts. | |||||||||||||
| SalaChasFdbHashChainLength | 1.3.6.1.4.1.6486.800.1.1.1.3.1.1.34 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current when set to 4, the number of entries to be looked up in the MAC table lookup (the hash chain length) is 4. when set to 8, the number of entries to be looked up in the MAC table lookup (the hash chain length) is 8.
| |||||||||||||
| NalcatelIND1ChassisMIBConformance | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2 | ||||||||||||
node · current Branch For Chassis Supervision Chassis MIB Subsystem Conformance Information. | |||||||||||||
| NalcatelIND1ChassisMIBGroups | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1 | ||||||||||||
node · current Branch For Chassis Supervision Chassis MIB Subsystem Units Of Conformance. | |||||||||||||
| GchasControlModuleGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.1 | ||||||||||||
group · current Chassis Supervision Control Modules Group. | |||||||||||||
| GchasControlRedundantGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.2 | ||||||||||||
group · current Chassis Supervision Redundant Control Modules Group. | |||||||||||||
| GchasChassisGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.3 | ||||||||||||
group · current Chassis Supervision Chassis Group. | |||||||||||||
| GchasControlReloadStatusGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.4 | ||||||||||||
group · current Chassis Supervision NI Reload Status Control Modules Group.
| |||||||||||||
| GchasGlobalControlGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.5 | ||||||||||||
group · current Chassis Supervision Global Control Modules Group. | |||||||||||||
| GchassisNotificationGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.6 | ||||||||||||
| GalaChasEntPhysFanGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.7 | ||||||||||||
| GalaChasHashControlGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.8 | ||||||||||||
| GalaChasNonUCHashControlGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.9 | ||||||||||||
| GchasSupervisionCmmCertifiedStatusGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.10 | ||||||||||||
group · current CMM Slot where /certified directory evaluated Group. | |||||||||||||
| GalaChasNotificationObjectGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.11 | ||||||||||||
group · current Chassis Supervision Notification Object Group.
| |||||||||||||
| GalaChasHashModeGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.12 | ||||||||||||
| GalaChasBpsGlobalGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.13 | ||||||||||||
group · current BPS objects global group | |||||||||||||
| GalaChasBpsConnPriorityGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.14 | ||||||||||||
| GalaChasBpsPowerSupplyGroup | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.15 | ||||||||||||
group · current BPS Power Supply group. | |||||||||||||
| NalaIpArpConfig | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.33 | ||||||||||||
| SalaIpArpLimitConfig | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.33.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To select ARP table size
| |||||||||||||
| NalaIptablesConfig | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.34 | ||||||||||||
| SalaIptablesLimitConfig | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.34.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To select IP table size
| |||||||||||||
| NalcatelIND1ChassisMIBCompliances | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.2 | ||||||||||||
node · current Branch For Chassis Supervision Chassis MIB Subsystem Compliance Statements. | |||||||||||||
| MalcatelIND1ChassisMIBCompliance | 1.3.6.1.4.1.6486.800.1.1.1.3.1.2.2.1 | ||||||||||||
compliance · current Compliance statement for Chassis Supervision.
| |||||||||||||
| NchassisTrapsDesc | 1.3.6.1.4.1.6486.800.1.3.2.4.1 | ||||||||||||
| !chassisTrapsStr | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.1 | ||||||||||||
notification · current A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to aware the user of for maintenance purpose. | |||||||||||||
| !chassisTrapsAlert | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.2 | ||||||||||||
notification · current generic trap notifying something changed in the chassis whatever it's a failure or not | |||||||||||||
| !chassisTrapsStateChange | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.3 | ||||||||||||
notification · current A status change was detected | |||||||||||||
| !poePowerBudgetChange | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.6 | ||||||||||||
notification · current Indicates that any further temperature increase will cause POE power budget rampdown. | |||||||||||||
| !chassisTrapsLowFlashSpace | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.7 | ||||||||||||
notification · current Trap notifying the user when the free flash space falls below the set minimum level
| |||||||||||||
| !chassisTrapNiBPSLessAllocatedSytemPower | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.8 | ||||||||||||
notification · current Insufficient system power given by BPS | |||||||||||||
| !chassisTrapsBPSStateChange | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.9 | ||||||||||||
notification · current BPS power supplies insertion/removal trap | |||||||||||||
| !chassisTrapsNiBPSFETStateChange | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.10 | ||||||||||||
notification · current BPS power supplies FET state change trap | |||||||||||||
| !chassisTrapsFabricError | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.11 | obsolete | |||||||||||
| !chassisTrapsFabricLinkShutDown | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.12 | obsolete | |||||||||||
notification · obsolete Fabric Link shut Down due to unrecoverable fabric link errors | |||||||||||||
| !chassisTrapsprocessorParityError | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.13 | obsolete | |||||||||||
notification · obsolete Previous reload was due to Processor parity error | |||||||||||||
| !chassisTrapsSavedStackTopologyChange | 1.3.6.1.4.1.6486.800.1.3.2.4.1.0.14 | ||||||||||||
notification · current Trap to indicate change in current stack topology from the saved topology | |||||||||||||
| NchassisTrapsObj | 1.3.6.1.4.1.6486.800.1.3.2.4.2 | ||||||||||||
| SchassisTrapsStrLevel | 1.3.6.1.4.1.6486.800.1.3.2.4.2.1 | ChassisTrapsStrLevel | RO | ||||||||||
scalar · ChassisTrapsStrLevel · read-only · current An enumerated value which provides the urgency level of the STR. | |||||||||||||
| SchassisTrapsStrAppID | 1.3.6.1.4.1.6486.800.1.3.2.4.2.2 | ChassisTrapsStrAppID | RO | ||||||||||
scalar · ChassisTrapsStrAppID · read-only · current Application Identification number | |||||||||||||
| SchassisTrapsStrSnapID | 1.3.6.1.4.1.6486.800.1.3.2.4.2.3 | ChassisTrapsStrSnapID | RO | ||||||||||
scalar · ChassisTrapsStrSnapID · read-only · current Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs. | |||||||||||||
| SchassisTrapsStrfileName | 1.3.6.1.4.1.6486.800.1.3.2.4.2.4 | SnmpAdminString (SIZE (0..19)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..19)) · read-only · current Name of the source file where the fault was detected. This is given by the C ANSI macro __FILE__. The path shouldn't appear. | |||||||||||||
| SchassisTrapsStrfileLineNb | 1.3.6.1.4.1.6486.800.1.3.2.4.2.5 | ChassisTrapsStrfileLineNb | RO | ||||||||||
scalar · ChassisTrapsStrfileLineNb · read-only · current Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__. | |||||||||||||
| SchassisTrapsStrErrorNb | 1.3.6.1.4.1.6486.800.1.3.2.4.2.6 | ChassisTrapsStrErrorNb | RO | ||||||||||
scalar · ChassisTrapsStrErrorNb · read-only · current Fault identificator. The error number identify the kind the detected fault and allow a mapping of the data contained in chassisTrapsdataInfo. | |||||||||||||
| SchassisTrapsStrcomments | 1.3.6.1.4.1.6486.800.1.3.2.4.2.7 | SnmpAdminString (SIZE (0..63)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-only · current comment text explaning the fault. | |||||||||||||
| SchassisTrapsStrdataInfo | 1.3.6.1.4.1.6486.800.1.3.2.4.2.8 | ChassisTrapsStrdataInfo | RO | ||||||||||
scalar · ChassisTrapsStrdataInfo · read-only · current Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes. | |||||||||||||
| SchassisTrapsObjectType | 1.3.6.1.4.1.6486.800.1.3.2.4.2.9 | ChassisTrapsObjectType | RO | ||||||||||
scalar · ChassisTrapsObjectType · read-only · current enumerated value which provide the object type involved in the alert trap. | |||||||||||||
| SchassisTrapsObjectNumber | 1.3.6.1.4.1.6486.800.1.3.2.4.2.10 | ChassisTrapsObjectNumber | RO | ||||||||||
scalar · ChassisTrapsObjectNumber · read-only · current number defining the order of the object in the set. EX: number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. A instance of the appearance of the trap could be: failure on a module. Power supply 3. | |||||||||||||
| SchassisTrapsAlertNumber | 1.3.6.1.4.1.6486.800.1.3.2.4.2.11 | ChassisTrapsAlertNumber | RO | ||||||||||
scalar · ChassisTrapsAlertNumber · read-only · current this number identify the alert among all the possible chassis alert causes. | |||||||||||||
| SchassisTrapsAlertDescr | 1.3.6.1.4.1.6486.800.1.3.2.4.2.12 | SnmpAdminString (SIZE (0..127)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..127)) · read-only · current description of the alert matching chassisTrapsAlertNumber | |||||||||||||
| SphysicalIndex | 1.3.6.1.4.1.6486.800.1.3.2.4.2.13 | PhysicalIndex | RO | ||||||||||
scalar · PhysicalIndex · read-only · current The Physical index of the involved object. | |||||||||||||
| SpoePowerBudgetChangeSlot | 1.3.6.1.4.1.6486.800.1.3.2.4.2.16 | INTEGER (0..64) | RO | ||||||||||
scalar · INTEGER (0..64) · read-only · current Slot number on which PoE power budget changed. | |||||||||||||
| SpoePowerBudgetOld | 1.3.6.1.4.1.6486.800.1.3.2.4.2.17 | INTEGER (0..900) | RO | ||||||||||
scalar · INTEGER (0..900) · read-only · current PoE power budget before the event. | |||||||||||||
| SpoePowerBudgetNew | 1.3.6.1.4.1.6486.800.1.3.2.4.2.18 | INTEGER (0..900) | RO | ||||||||||
scalar · INTEGER (0..900) · read-only · current PoE power budget after the event. | |||||||||||||
| SpoePowerBudgetChangeReason | 1.3.6.1.4.1.6486.800.1.3.2.4.2.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The reason for PoE power budget change: userConfigured(1) --> Configured by the user tempThresholdCrossed(2) --> Temperature crossed the threshold level tempThresholdNormal (3) --> Temperature back to normal powerSupplyChanged(4) --> Power supply changed such as from primary to backup PS unknown (7): unknown
| |||||||||||||
| SchassisFreeFlashSpace | 1.3.6.1.4.1.6486.800.1.3.2.4.2.20 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The amount of free space (in KBytes) available in the device indicated by PhysicalIndex. | |||||||||||||
| SchasNiRequestedBpsSystemPower | 1.3.6.1.4.1.6486.800.1.3.2.4.2.21 | Unsigned32 (0..126) | RO | ||||||||||
scalar · Unsigned32 (0..126) · read-only · current Requested system power from os-bps | |||||||||||||
| SchasNiGrantedBpsSystemPower | 1.3.6.1.4.1.6486.800.1.3.2.4.2.22 | Unsigned32 (0..126) | RO | ||||||||||
scalar · Unsigned32 (0..126) · read-only · current Granted system power from os-bps | |||||||||||||
| SchasTrapsBPSPowerSupply | 1.3.6.1.4.1.6486.800.1.3.2.4.2.23 | ChasTrapsBPSPowerSupply | RO | ||||||||||
scalar · ChasTrapsBPSPowerSupply · read-only · current value which provide bps power supply involved in the State change trap | |||||||||||||
| SchasTrapsBPSEventAlert | 1.3.6.1.4.1.6486.800.1.3.2.4.2.24 | ChasTrapsBPSEventAlert | RO | ||||||||||
scalar · ChasTrapsBPSEventAlert · read-only · current enumerated value identifying alert | |||||||||||||
| SchasTrapsBPSSystemFETChange | 1.3.6.1.4.1.6486.800.1.3.2.4.2.25 | ChasTrapsBPSFetState | RO | ||||||||||
scalar · ChasTrapsBPSFetState · read-only · current enumerated value which indicate Fet state | |||||||||||||
| SchasTrapsBPSPoeFETChange | 1.3.6.1.4.1.6486.800.1.3.2.4.2.26 | ChasTrapsBPSFetState | RO | ||||||||||
scalar · ChasTrapsBPSFetState · read-only · current enumerated value which indicate Fet state | |||||||||||||
| SchasTrapsFabricNiHgLink | 1.3.6.1.4.1.6486.800.1.3.2.4.2.27 | Unsigned32 (0..16) | RO | obsolete | |||||||||
scalar · Unsigned32 (0..16) · read-only · obsolete NI Link which is affected | |||||||||||||
| SchasTrapsFabricHgLink | 1.3.6.1.4.1.6486.800.1.3.2.4.2.28 | Unsigned32 (0..16) | RO | obsolete | |||||||||
scalar · Unsigned32 (0..16) · read-only · obsolete Fabric Link which is Shut Down | |||||||||||||
| SchasTrapsCmmLetter | 1.3.6.1.4.1.6486.800.1.3.2.4.2.29 | Unsigned32 | RO | obsolete | |||||||||
scalar · Unsigned32 · read-only · obsolete CMM slot on which the Fabric Link is Shut Down | |||||||||||||
| SchasSavedStackTopologyChangeTrap | 1.3.6.1.4.1.6486.800.1.3.2.4.2.30 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current Notify if there is any difference in stack topology from the saved topology. Informations such as Slot number, chassis name, management ip address and whether NI is added or removed will be displayed as a string | |||||||||||||
Textual conventions
ChasEntPhysLedINTEGERamberBlink(5)amberOn(4)greenBlink(3)greenOn(2)notApplicable(0)off(1)Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber.
ChasEntPhysPowerTypeINTEGERac(1)dc(2)notApplicable(0)Textual convention for type of power supply.
ChasTrapsBPSEventAlertINTEGERbpsPsPlugged(1)bpsPsUnPlugged(2)notApplicable(0)Textual convention for BPS event alert
ChasTrapsBPSFetStateINTEGERnotApplicable(0)off(2)on(1)Textual convention for BPS FET state
ChasTrapsBPSPowerSupplyINTEGERbpsPoepower1(3)bpsPoepower2(4)bpsPoepower3(5)bpsSyspower1(1)bpsSyspower2(2)notApplicable(0)Textual convention for type of bps power supply.
ChassisTrapsAlertNumberINTEGERactivateScheduled(44)activateStarted(45)c20NiFailed(57)c20RestoreFailed(56)c20RestoreOk(55)c20UpgradeFailed(54)c20UpgradeOk(53)certifyCompleted(5)certifyFailed(6)certifyFlashSyncStarted(4)certifyStarted(3)cmmAPlugged(33)cmmAUnPlugged(35)cmmBPlugged(34)cmmBUnPlugged(36)cmmStartingAsPrimary(30)cmmStartingAsSecondary(31)cmmStartupCompleted(32)fanFailed(18)fanOk(19)fansOk(20)getAfileCompleted(46)getAfileFailed(47)lowNvramBattery(37)macAllocFailed(16)macRangeFailed(17)notEnoughFabricsOperational(38)powerMissing(24)psAllOperational(27)psNotOperational(25)psOperational(26)redundancyDisabledCertifyNeeded(29)redundancyNotSupported(28)reloadInProgress(52)restoreCompleted(11)restoreFailed(12)restoreStarted(10)runningCertified(2)runningWorking(1)secAutoActivate(40)secAutoCertifyCompleted(42)secAutoCertifyStarted(41)secInactiveReset(43)simplexNoSynchro(39)synchroCompleted(8)synchroFailed(9)synchroStarted(7)sysUpdateEnd(51)sysUpdateError(50)sysUpdateInProgress(49)sysUpdateStart(48)takeoverCompleted(15)takeoverDeferred(14)takeoverStarted(13)tempOverDangerThreshold(23)tempOverThreshold(21)tempUnderThreshold(22)this number identify the alert among all the possible chassis alert causes.
ChassisTrapsObjectNumberINTEGER (0..255)A number defining the order of the object in the set. EX: The number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. An instance of the appearance of the trap could be: failure on a module. Power supply 3.
ChassisTrapsObjectTypeINTEGERchassis(1)cmm(5)fabric(6)fan(4)gbic(7)ni(2)powerSuply(3)An enumerated value which provides the object type involved in the alert trap.
ChassisTrapsStrAppIDINTEGER (0..255)Application Identification number
ChassisTrapsStrErrorNbINTEGER (0..65535)Fault identifier. The error number identifies the kind the detected fault and allows a mapping of the data contained in chassisTrapsdataInfo.
ChassisTrapsStrLevelINTEGERstrApplicationFatal(2)strFatal(3)strNotFatal(1)enumerated value which provide the urgency level of the STR.
ChassisTrapsStrSnapIDINTEGER (0..255)Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs.
ChassisTrapsStrdataInfoOCTET STRING (SIZE (0..63))Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes.
ChassisTrapsStrfileLineNbINTEGER (1..65535)Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__.
Traps / Notifications
- chassisTrapNiBPSLessAllocatedSytemPower
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.8 - chassisTrapsAlert
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.2 - chassisTrapsBPSStateChange
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.9 - chassisTrapsFabricError
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.11 - chassisTrapsFabricLinkShutDown
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.12 - chassisTrapsLowFlashSpace
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.7 - chassisTrapsNiBPSFETStateChange
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.10 - chassisTrapsSavedStackTopologyChange
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.14 - chassisTrapsStateChange
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.3 - chassisTrapsStr
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.1 - chassisTrapsprocessorParityError
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.13 - poePowerBudgetChange
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.6
Groups and compliance
- alaChasBpsConnPriorityGroup
- alaChasBpsGlobalGroup
- alaChasBpsPowerSupplyGroup
- alaChasEntPhysFanGroup
- alaChasHashControlGroup
- alaChasHashModeGroup
- alaChasNonUCHashControlGroup
- alaChasNotificationObjectGroup
- alcatelIND1ChassisMIBCompliance
- alcatelIND1ChassisPhysMIBCompliance
- alcatelIND1ChassisSupervisionRfsGroup
- chasChassisGroup
- chasControlModuleGroup
- chasControlRedundantGroup
- chasControlReloadStatusGroup
- chasEntPhysicalGroup
- chasGlobalControlGroup
- chasSupervisionCmmCertifiedStatusGroup
- chasSupervisionFlashMemGroup
- chasSupervisionRfsDfGroup
- chassisNotificationGroup
- chassisPhysNotificationGroup