MIB Browser
This document is the SNMP MIB module for the SNMP Textual Conventions
(TCs) used in the Nokia SROS manageability instrumentation.

Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this
document is authorized on the condition that the foregoing copyright
notice is included.

This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property.  Nokia retains
all title and ownership in the Specification, including any
revisions.

Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.

This Specification is supplied `as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification.
Organization
Nokia
Root OID
1.3.6.1.4.1.6527.1.1.2
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m TIMETRA-TC-MIB -Tp
snmpwalk -v2c -c <community> -m TIMETRA-TC-MIB <host> 1.3.6.1.4.1.6527.1.1.2

Imports

INET-ADDRESS-MIBInetAddress, InetAddressIPv6, InetAddressPrefixLength, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue
TIMETRA-GLOBAL-MIBtimetraModules

OID tree

NameOIDTypeAccessStatus
ItimetraTCMIBModule1.3.6.1.4.1.6527.1.1.2

Textual conventions

AluNgeKeygroupIdOrZero Unsigned32 (0..127)
A number used to identify an entry in the aluNgeKeygroupTable or zero.
BgpConnectRetryTime Integer32 (1..65535)
The value of BgpConnectRetryTime is a time interval in seconds for a
'ConnectRetry' timer.default is 120 seconds.
BgpHoldTime Integer32 (0 | 3..65535)
The value of BgpHoldTime is a time interval in seconds for Hold Timer.
BgpPeeringStatus INTEGER

duplicatePeer(10) genError(14) gtpNotSupported(13) hostInactive(6) installed(1) invalidRadiusAttr(8) l2AwNotSupported(12) maxPeersReached(11) noDualHomingSupport(7) noDynamicPeerGroup(9) noEnhancedSubmgt(3) notApplicable(0) notInstalled(2) parentItfDown(5) wrongAntiSpoof(4)

The status of the BGP peering session.
ClassIndex Unsigned32 (1..255)
Source/Destination class index.
ClassIndexOrNone Unsigned32 (0 | 1..255)
Source/Destination class index or none(0).
DateAndTimeOrEmpty OCTET STRING (SIZE (0 | 8 | 11))
An object of type DateAndTimeOrEmpty data type contains a date-time
specification as in SNMPv2-TC::DateAndTime, or is empty
Dot1PPriority Integer32 (-1 | 0..7)
IEEE 802.1p priority.  zero is lowest, seven is highest.
-1 means not set
Dot1PPriorityMask Integer32 (0..7)
IEEE 802.1p priority mask.  zero is lowest, seven is highest.
Dot1PPriorityNonZeroMask Integer32 (1..7)
IEEE 802.1p priority mask.
IPv6FlowLabel Integer32 (-1 | 0..1048575)
The flow identifier or Flow Label in an IPv6
packet header that may be used to discriminate
traffic flows.  (RFC3595).
The value -1 indicates 'no flowLabel'
IPv6FlowLabelMask Unsigned32 (0..1048575)
IPv6 flow label mask
InterfaceIndex Integer32

Display hint: d

A unique value, greater than zero, for each interface
or interface sub-layer in the managed system.  It is
recommended that values are assigned contiguously
starting from 1.  The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization.
IpAddressPrefixLength Integer32 (0..32)
the number of bits to match in an IP address mask.
LAGInterfaceNumber Integer32 (1..800)
The unique number identifying a LAG interface.

There are maximum 64 LAG interfaces, when the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1).
LAGInterfaceNumberOrZero Integer32 (0 | 1..800)
LAGInterfaceNumberOrZero is similar to LAGInterfaceNumber but includes
zero indicating invalid LAG identifier.
MciBoolean INTEGER

mciFalse(2) mciTrue(1)

This provides MCI type to for the objects which do not have well
defined defaults
PwPortIdOrZero Unsigned32 (0 | 1..32767)
PwPortIdOrZero indicates the range for pw port id's with 0 as the
default value.
QTag Integer32 (1..4094)
The QTag data type is a 12-bit integer tag used to identify
a service.  The values 0 and 4095 are not allowed.
QTagFullRange Unsigned32 (0..4095)
The data type QTagFullRange represents a VLAN tag. A VLAN tag is 12
bits is size. The data type QTagFullRange covers the whole range of
possible values. (0..4095 or 0x0 .. 0xFFF)
QTagFullRangeOrNone Integer32 (-1 | 0..4095)
The data type QTagFullRangeOrNone represents a VLAN tag. A VLAN tag is
12 bits is size. The data type QTagFullRange covers the whole range of
possible values. (0..4095 or 0x0 .. 0xFFF).

The value '-1' indicates the absence of a VLAN tag.
QTagOrNone Integer32 (-1 | 1..4094)
The QTag data type is a 12-bit integer tag used to identify
a service.  The values 0 and 4095 are not allowed.

The value '-1' indicates the absence of a VLAN tag.
QTagOrZero Unsigned32 (0..4094)
The data type QTagOrZero represents a VLAN tag.

The value '0' indicates that no VLAN tag is provisioned, or that its
value is unknown.
SdpBindId OCTET STRING (SIZE (8))
The value used to uniquely identify an SDP Binding. The first four
octets correspond to the zero-extended 16-bit SDP ID, while the
remaining four octets correspond to the 32-bit VC ID, both encoded in
network byte order.
ServiceAccessPoint Integer32 (-1 | 0..255)
802.2 LLC SAP value, Source and Destination.
ServiceAdminStatus INTEGER

down(2) up(1)

ServiceAdminStatus data type is an enumerated integer that describes
the values used to identify the administrative state of a service.
ServiceOperStatus INTEGER

down(2) up(1)

ServiceOperStatus data type is an enumerated integer that describes
the values used to identify the current operational state of a
service.
SvcISID Integer32 (-1 | 0..16777215)
The SvcISID specifies a 24 bit (0..16777215) service instance
identifier for the service. As part of the Provider Backbone Bridging
frames, it is used at the destination PE as a demultiplexor field.

The value of -1 is used to indicate the value of this object is
unspecified.
TAdaptationRule INTEGER

closest(3) max(1) min(2)

The adaptation rule to be applied to calculate the operational values
for the specified entity.
TAdaptationRuleOverride INTEGER

closest(3) max(1) min(2) noOverride(0)

The adaptation rule to be applied to calculate the operational values
for the specified entity.
TAdvCfgRate Integer32 (0..100000000)
The PIR rate to be used in kbps.
TAnyQosPolicyID Unsigned32 (1..4294967295)
The identification number of QoS policy. Any value greater than 65535
indicates the policy was created by the system.

The format is:
   +--------------------------------+
   |<----C-----><-B><------A------->|
   +--------------------------------+
   31                               0

where:
 A (16 bits) is the base policy identifier.
 B (4 bits) is the 'policy type'.
 C (12 bits) is the auxiliary identifier.

When policy type = 0 (0000b), the acceptable range for base policy
                             identifier is 1..65535. This is the user
                             configured values.
When policy type = 1 (0001b)  [NAT/LNS], the acceptable range for base
                             policy identifier is 0..4. These policies
                             are considered 'internal' and cannot be
                             created or modified by the user.
When policy type = 2 (0010b)  The auxiliary identifier represents
                             internal policies that are created
                             by the system based on dynamic flow based
                             requests from diameter and cannot be
                             modified by the user. These polices
                             ranges from 1..2047. For all other policy
                             types, the auxiliary identifier must be
                             zero.
TAnyQosPolicyIDorZero Unsigned32 (0 | 1..4294967295)
The identification number of QoS policy. Refer to the description of
the textual convention TAnyQosPolicyID for more info on how this
number is to be interpreted.
TAtmTdpDescrType INTEGER

clp0And1pcr(0) clp0And1pcrPlusClp0And1scr(1) clp0And1pcrPlusClp0scr(2) clp0And1pcrPlusClp0scrTag(3)

The TAtmTdpDescrType is an enumerated integer whose value indicates
the types of cell loss priority to be used in conjunction with traffic
parameters.

The following values are outlined:
 Integer Value               Interpretation
 -------------               ------------------------
 clp0And1pcr                 PCR applies to CLP 0 and
                             CLP 1 cell flows
 clp0And1pcrPlusClp0And1scr  PCR applies to CLP 0 and
                             CLP 1 cell flows.
                             SCR applies to CLP 0 and
                             CLP 1 cell flows.
 clp0And1pcrPlusClp0scr      PCR applies to CLP 0 and
                             CLP 1 cell flows.
                             SCR applies to CLP 0 cell flows.
 clp0And1pcrPlusClp0scrTag   PCR applies to CLP 0 and
                             CLP 1 cell flows.
                             SCR applies to CLP 0 cell flows.
TBWRateType INTEGER

kbps(1) percentLocalLimit(3) percentPortLimit(2)

The type of the PIR/CIR percent rate. The value 'kbps' means the rate
is specified in kbps. The value 'percentPortLimit' means the rate is
specified in percentage of port limit. The value 'percentLocalLimit'
means the rate is specified in percentage of local limit.
TBgpSrv6UpaTriggerNextHop INTEGER

frr(1) none(0)

TBgpUntaggedRouteType INTEGER

none(0) untaggedTunnel(1)

Type of untagged route type to resolve
TBurstHundredthsOfPercent Integer32 (0..10000)
The percentage of buffer space assigned to a queue that is reserved
for some purpose, defined to two decimal places.
TBurstLimit Integer32 (-1 | 1..14000000)
An explicit shaping burst size for a queue. The value of -1 specifies
system default value.
TBurstLimitOverride Integer32 (-2 | -1 | 1..14000000)
An explicit shaping burst size for a queue. or scheduler or
aggregate-rate-limit. The value -1 means that the actual value is
derived from the corresponding buffer policy's default value. A value
of -2 specifies no override.
TBurstPercent Integer32 (0..100)
The percentage of buffer space assigned to a queue that is reserved
for some purpose.
TBurstPercentOrDefault Integer32 (-1 | 0..100)
The percentage of buffer space assigned to a queue that is reserved
for some purpose. The value -1 means that the actual value is derived
from the corresponding buffer policy's default value.
TBurstPercentOrDefaultOverride Integer32 (-2 | -1 | 0..100)
The percentage of buffer space assigned to a queue that is reserved
for some purpose.

The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.

A value of -2 specifies no override.
TBurstSize Integer32 (-1 | 0..1048576)
The amount of buffer space (in kbytes) assigned to a queue. The value
-1 means that the actual value is derived from the corresponding
buffer policy's default value.
TBurstSizeBytes Integer32 (-1 | 0..1073741824)
The amount of buffer space (in bytes) assigned to a queue. The value
-1 means that the actual value is derived from the corresponding
buffer policy's default value.
TBurstSizeBytesOverride Integer32 (-2 | -1 | 0..134217728)
The amount of buffer space (in bytes) assigned to a queue. The value
-1 means that the actual value is derived from the corresponding
buffer policy's default value. A value of -2 specifies no override.
TBurstSizeBytesOvr Integer32 (-2 | -1 | 0..1073741824)
The amount of buffer space (in bytes) assigned to a queue. The value
-1 means that the actual value is derived from the corresponding
buffer policy's default value. A value of -2 specifies no override.
TBurstSizeOverride Integer32 (-2 | -1 | 0..1048576)
The amount of buffer space (in kbytes) assigned to a queue. The value
-1 means that the actual value is derived from the corresponding
buffer policy's default value. A value of -2 specifies no override.
TCIRPercentOverride Integer32 (-2 | 0..10000)
The CIR percentage rate specified in centipercent. A value of -2
specifies no override.
TCIRRate Integer32 (-1 | 0..100000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
TCIRRateOverride Integer32 (-2 | -1 | 0..100000000)
The CIR rate to be used in kbps. The value -1 means maximum rate. A
value of -2 specifies no override.
TClassBurstLimit Integer32 (-1 | 1..327680)
An explicit shaping burst size for a class. The value -1 means that
the actual value is derived from the corresponding class's default
value.
TCpmFilterBurstSize Integer32 (-1 | 0..131072)
The amount of buffer space (in kbytes) assigned to a queue. The value
-1 means that the actual value is derived from the corresponding
buffer policy's default value.
TCpmProtPolicyID Unsigned32 (0..255)
The data type TCpmProtPolicyID represents the identification number of
a CPM Protection policy.

The value '0' indicates that no CPM Protection policy is provisioned.
TCpmProtPolicyIDOrDefault Integer32 (-1 | 1..255)
The data type TCpmProtPolicyIDOrDefault represents the identification
number of a CPM Protection policy.

The value of '-1' indicates the system determined default value.
TDCpuProtPolicyType INTEGER

accessNetwork(1) port(2)

TDCpuProtPolicyType data type is an enumerated integer that describes
the values for distributed CPU protection policy type.
TDEProfile INTEGER

de(3) in(1) out(2)

This textual convention specifies the profile marking of a packet.

Value of 'in' specifies the in-profile marking.

Value of 'out' specifies the out-profile marking.

Value of 'de' specifies that the profile marking will be based on the DE
(Drop-Eligible) bit.  DE bit-value of '0' specifies in-profile and DE
bit value of '1' specifies out-profile marking.
TDEValue Integer32 (-1 | 0..1)
This textual convention specifies the DE (Drop Eligible) bit value.
The value of '-1' means DE value is not specified.
TDEWredSlopeProfile INTEGER

de(3) exceed(4) in(1) inplus(5) out(2)

This textual convention specifies the profile marking of a packet.

Value of 'in' specifies the in-profile marking.

Value of 'out' specifies the out-profile marking.

Value of 'de' specifies that the profile marking will be based on the DE
(Drop-Eligible) bit.  DE bit-value of '0' specifies in-profile and DE
bit value of '1' specifies out-profile marking.
TDHCPFilterID TFilterID
The identification number of a DHCP filter.
TDSCPFilterActionValue Integer32 (-1 | 0..255)
The value of a Differential Services Code Point. -1 means not set.
TDSCPName TNamedItem
The name of a Differential Services Code Point value.
TDSCPNameOrEmpty TNamedItemOrEmpty
The name of a Differential Services Code Point value.
TDSCPValue Integer32 (0..63)
The value of a Differential Services Code Point.
TDSCPValueOrNone Integer32 (-1 | 0..63)
The value of a Differential Services Code Point (DSCP). A value of -1
means that no DSCP value is configured or available.
TDirection INTEGER

both(0) egress(2) ingress(1)

TDirection denotes a direction.
TDirectionIngEgr INTEGER

egress(2) ingress(1)

TDirectionIngEgr denotes a direction.
TEgrDynPolicerIdOrNone Integer32 (0 | 1..63)
The data type describes the QoS dynamic policer identifier on egress
side or zero when not specified.
TEgrDynQueueIdOrNone Integer32 (0 | 1..63)
The data type describes the QoS dynamic queue identifier on egress
side or zero when not specified.
TEgrHsmdaPerPacketOffsetOvr Integer32 (-128 | -64..31)
The value, in bytes, of the override of the adjustment to make to the
size of each outgoing packet for accounting. A value of -128 indicates
no override.
TEgrPolicerId Integer32 (1..8)
The data type describes the QoS control policer identifier on egress
side.
TEgrPolicerIdOrNone Integer32 (0 | 1..8)
The data type describes the QoS control policer identifier on egress
side or zero when not specified.
TEgrRateModType INTEGER

aggRateLimit(2) namedScheduler(3) none(1)

The data type TEgrRateModType represents the type of egress-rate
modification that is to be applied.
TEgressHsmdaCounterId Unsigned32 (1..8)
The identification number of a HSMDA egress counter.
TEgressHsmdaCounterIdOrZero Unsigned32 (0 | 1..8)
The identification number of a HSMDA egress counter. The value 0
indicates an undefined counter id.
TEgressHsmdaPerPacketOffset Integer32 (-64..31)
The value, in bytes, of the adjustment to make to the size of each
outgoing packet for accounting.
TEgressHsmdaQueueId Integer32 (0 | 1..8)
The value of TEgressHsmdaQueueId specifies the identification number
of a HSMDA egress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TEgressHsmdaQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TEgressPerPacketOffset Integer32 (-64..31)
The value, in bytes, of the adjustment to make to the size of each
packet for accounting.
TEgressPerPacketOffsetOvr Integer32 (-128 | -64..31)
The value, in bytes, of the override for the adjustment to make to the
size of each packet for accounting. A value of -128 indicates no
override.
TEgressPolicerId Integer32 (1..63)
The data type describes the QoS control policer identifier on egress
side.
TEgressPolicerIdOrNone Integer32 (0 | 1..63)
The data type describes the QoS control policer identifier on egress
side or zero when not specified.
TEgressProfile INTEGER

exceed(4) in(1) inplus(5) out(2)

The profile marking of a packet. Value of 'in' specifies in-profile
marking. Value of 'out' specifies out-profile marking. Value of 'none'
specifies the profile marking of the packet will be inherited from the
existing enqueuing priority derived from earlier matches in the
classification hierarchy.
TEgressProfileOrNone INTEGER

de(3) exceed(4) in(1) inplus(5) none(0) out(2)

The profile marking of a packet. Value of 'in' specifies in-profile
marking. Value of 'out' specifies out-profile marking. Value of 'de'
specifies that the profile marking of the packet will be based on the
DE (Drop-Eligible) bit of the packet. DE bit value of '0' specifies
in-profile and DE bit value of '1' specifies out-profile marking.

Value of 'none' specifies the profile marking of the packet will be
inherited from the existing enqueuing priority derived from earlier
matches in the classification hierarchy.
TEgressQBurstLimDelayTime Unsigned32 (0 | 1..1000000)
Measure delay time
TEgressQBurstSizeType INTEGER

bytes(0) percent(1) time(2)

Type of delay
TEgressQDelayPercent Integer32 (-1 | 0..10000)
Measure delay percent
TEgressQDelayTime Integer32 (-1 | 0..1000000)
Measure delay time
TEgressQMaxDataTrans Integer32 (-1 | 512..32768)
The value, in bytes, transmitted at every scheduling opportunity for
the queues.
TEgressQPerPacketOffset Integer32 (-64..32)
The value, in bytes, of the adjustment to make to the size of each
packet for accounting.
TEgressQueueId Integer32 (0 | 1..8)
The value of TEgressQueueId specifies the identification number
of an egress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TEgressQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TEntryId TEntryIndicator (1..65535)
uniquely identifies an entry in a policy or filter table.
to facilitate insertion of entries in the tables, we recommend
assigning entry IDs by 10s:  10, 20, 30, etc.
TEntryIdOrZero TEntryIndicator (0..65535)
uniquely identifies an entry in a policy or filter table.
to facilitate insertion of entries in the tables, we recommend
assigning entry IDs by 10s:  10, 20, 30, etc.
The value 0, means that the object does not refer to a filter
entry at this time.
TEntryIndicator Unsigned32 (0..65535)
Uniquely identifies an entry in a policy or filter table. The value 0
is not a valid entry-id. When used as insertion point the value 0
indicates that entries must be inserted at the very beginning,
i.e.before the first entry defined.
TExpSecondaryShaperClassRate Integer32 (-1 | 1..10000000)
The expanded secondary shaper class PIR rate to be used in Kbps. The
value -1 means maximum rate.
TExpSecondaryShaperPIRRate Integer32 (-1 | 1..10000000)
The expanded secondary shaper PIR rate to be used in Kbps. The value
-1 means maximum rate.
TFCName TNamedItem
The name of a Forwarding Class entry.
TFCNameOrEmpty TNamedItemOrEmpty
The name of a Forwarding Class entry.
TFCSet Bits

af(2) be(0) ef(5) h1(6) h2(4) l1(3) l2(1) nc(7)

This data type describes a set of Forwarding Classes.
TFCType INTEGER

af(2) be(0) ef(5) h1(6) h2(4) l1(3) l2(1) nc(7)

This data type enumerates the Forwarding Classes.
TFCTypeOrNone INTEGER

af(2) be(0) ef(5) h1(6) h2(4) l1(3) l2(1) nc(7) none(-1)

This data type enumerates the Forwarding Classes.
TFIRRate Integer32 (-1 | 1..100000000)
The static fair rate to be used in kbps. The value -1 means maximum
rate.
TFilterID Unsigned32 (0..65535)
The identification number of a filter. 0 indicates an invalid
filter-id.
TFirBurstLimit Integer32 (-1 | 1..102400)
An explicit shaping burst size for a queue. The value of -1 specifies
system default value.
TFrameType INTEGER

e802dot2LLC(1) e802dot2SNAP(2) e802dot3(0) ethernetII(3)

The type of the frame for which this mac filter match criteria is
defined.
THPolCIRRate Integer32 (-1 | 0..2000000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
THPolCIRRateOverride Integer32 (-2 | -1 | 0..2000000000)
The CIR rate to be used in kbps. The value -1 means maximum rate. A
value of -2 specifies no override.
THPolPIRRate Integer32 (-1 | 1..2000000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
THPolPIRRateOverride Integer32 (-2 | -1 | 1..2000000000)
The PIR rate to be used in kbps. The value -1 means maximum rate. A
value of -2 specifies no override.
THPolVirtualScheCIRRate Integer32 (-1 | 0..800000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
THPolVirtualSchePIRRate Integer32 (-1 | 1..800000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
THSMDABurstSizeBytes Integer32 (-1 | 0..2688000)
The amount of buffer space (in bytes) assigned to a HSMDA queue. The
value -1 means that the actual value is derived from the corresponding
buffer policy's default value.
THSMDABurstSizeBytesOverride Integer32 (-2 | -1 | 0..2688000)
The amount of buffer space (in bytes) assigned to a HSMDA queue. The
value -1 means that the actual value is derived from the corresponding
buffer policy's default value. A value of -2 specifies no override.
THSMDAQueueBurstLimit Integer32 (-1 | 1..1000000)
An explicit shaping burst size of a HSMDA queue. The value -1 means
that the actual value is derived from the corresponding queue's
default value.
THsClassWeightOverride Integer32 (-2 | 1 | 2 | 4 | 8)
The THsClassWeightOverride data type specifies the weight of the
corresponding HS class feeding into its parent shaper. A value of -2
specifies no override.
THsPirRate Unsigned32 (1..100000 | 4294967295)
The HS PIR rate to be used in Mbps. The value of
4294967295(0xFFFFFFFF) means maximum rate.
THsPirRateOverride Unsigned32 (1..100000 | 4294967294 | 4294967295)
The HS PIR rate to be used in Mbps. The value of
4294967295(0xFFFFFFFF) means maximum rate. The value of
4294967294(0xFFFFFFFE) means no override.
THsSchedulerPolicyGroupId Integer32 (0 | 1)
The value of THsSchedulerPolicyGroupId specifies the identification
number of a HS scheduler policy group.  A value of zero (0)
indicates that no specific group identification has been assigned for
this object. When an object of type THsSchedulerPolicyGroupId is
an SNMP table index, an index value of zero (0) is not allowed and a
noCreation error will be returned.
THsSchedulerPolicyWeight Integer32 (1..127)
The weight of the specified HS entity while feeding into the parent.
THsSchedulerPolicyWeightOverride Integer32 (-2 | 1..127)
The weight of the specified HS entity while feeding into the parent. A
value of -2 specifies no override.
THsWrrWeightOvr Integer32 (-2 | 1..127)
The THsWrrWeightOvr data type specifies the override weight of the
corresponding HS queue feeding into its parent WRR scheduler. A value
of -2 specifies no override.
THsmdaCIRKRate Integer32 (-1 | 0..100000000)
The HSMDA CIR rate to be used in Kbps. The value -1 means maximum
rate.
THsmdaCIRKRateOverride Integer32 (-2 | -1 | 0..100000000)
The HSMDA CIR rate to be used in Kbps. The value -1 means maximum
rate. A value of -2 specifies no override.
THsmdaCIRMRate Integer32 (-1 | 0..100000)
The HSMDA CIR rate to be used in Mbps. The value -1 means maximum
rate.
THsmdaCIRMRateOverride Integer32 (-2 | -1 | 0..100000)
The HSMDA CIR rate to be used in Mbps. The value -1 means maximum
rate. A value of -2 specifies no override.
THsmdaCounterIdOrZero Unsigned32 (0 | 1..8)
The identification number of a HSMDA  counter.
The value 0 indicates an undefined counter id.
THsmdaCounterIdOrZeroOrAll Integer32 (-1 | 0 | 1..8)
The identification number of a HSMDA  counter.
The value (0) indicates an undefined counter id.
The value (-1) is used to indicate all counters.
THsmdaPIRKRate Integer32 (-1 | 1..100000000)
The HSMDA PIR rate to be used in Kbps. The value -1 means maximum
rate.
THsmdaPIRKRateOverride Integer32 (-2 | -1 | 1..100000000)
The HSMDA PIR rate to be used in Kbps. The value -1 means maximum
rate. A value of -2 specifies no override.
THsmdaPIRMRate Integer32 (-1 | 1..100000)
The HSMDA PIR rate to be used in Mbps. The value -1 means maximum
rate.
THsmdaPIRMRateOverride Integer32 (-2 | -1 | 1..100000)
The HSMDA PIR rate to be used in Mbps. The value -1 means maximum
rate. A value of -2 specifies no override.
THsmdaPolicyIncludeQueues INTEGER

q1to2(1) q1to3(2)

The value of THsmdaPolicyIncludeQueues specifies which queues are to
be scheduled in the same class in a HSMDA scheduler.
THsmdaPolicyScheduleClass Integer32 (1..3)
The value of THsmdaPolicyScheduleClass the class at which the queues
specified by THsmdaPolicyIncludeQueues in a HSMDA scheduler.
THsmdaSchedulerPolicyGroupId Integer32 (0 | 1..2)
The value of THsmdaSchedulerPolicyGroupId specifies the identification
number of a HSMDA scheduler policy group.  A value of zero (0)
indicates that no specific group identification has been assigned for
this object. When an object of type THsmdaSchedulerPolicyGroupId is
an SNMP table index, an index value of zero (0) is not allowed and a
noCreation error will be returned.
THsmdaWeight Integer32 (1..100)
The weight of the specified HSMDA entity while feeding into the
parent.
THsmdaWeightClass INTEGER

class1(1) class2(2) class4(4) class8(8)

The weight of the specified HSMDA entity while feeding into the
parent.
THsmdaWeightOverride Integer32 (-2 | 1..100)
The weight of the specified HSMDA entity while feeding into the
parent. A value of -2 specifies no override.
THsmdaWrrWeight Integer32 (1..32)
The weight of the specified HSMDA entity while feeding into the
parent.
THsmdaWrrWeightOverride Integer32 (-2 | 1..32)
The weight of the specified HSMDA entity while feeding into the
parent. A value of -2 specifies no override.
TIPFilterID TFilterID
The identification number of an IP filter.
TIPFilterType INTEGER

normal(1) tagged-entries(3) vxlanVni(2)

A type containing the possible types of IP/IPv6 filters provided by
the system.
TIcmpCodeOrNone Integer32 (-1 | 0..255)
ICMP code.

The value -1 means ICMP code is not set.
TIcmpTypeOrNone Integer32 (-1 | 0..255)
ICMP type.

The value -1 means ICMP type is not set.
TIngClassRemarkType INTEGER

any(1) dot1pExp(2)

The remarking to be used.
TIngDynPolicerIdOrNone Integer32 (0 | 1..63)
The data type describes the QoS dynamic policer identifier on ingress
side or zero when not specified.
TIngHsmdaPerPacketOffsetOvr Integer32 (-128 | -32..31)
The value, in bytes, of the override of the adjustment to make to the
size of each incoming packet for accounting. A value of -128 indicates
no override.
TIngPolicerId Integer32 (1..32)
The data type describes the QoS control policer identifier on ingress
side.
TIngPolicerIdOrNone Integer32 (0 | 1..32)
The data type describes the QoS control policer identifier on ingress
side or zero when not specified.
TIngressHsmdaCounterId Unsigned32 (1..8)
The identification number of a HSMDA ingress counter.
TIngressHsmdaCounterIdOrZero Unsigned32 (0 | 1..8)
The identification number of a HSMDA ingress counter. The value 0
indicates an undefined counter id.
TIngressHsmdaPerPacketOffset Integer32 (-32..31)
The value, in bytes, of the adjustment to make to the size of each
incoming packet for accounting.
TIngressHsmdaQueueId Integer32 (0 | 1..8)
The value of TIngressHsmdaQueueId specifies the identification number
of a HSMDA ingress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TIngressHsmdaQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TIngressPolicerId Integer32 (1..63)
The data type describes the QoS control policer identifier on ingress
side.
TIngressPolicerIdOrNone Integer32 (0 | 1..63)
The data type describes the QoS control policer identifier on ingress
side or zero when not specified.
TIngressQPerPacketOffset Integer32 (-32..30)
The value, in bytes, of the adjustment to make to the size of each
incoming packet for accounting.

Only even values are supported.
TIngressQueueId Integer32 (0 | 1..32)
The value of TIngressQueueId specifies the identification number
of an ingress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TIngressQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TIpOption Integer32 (0..255)
IP packet options octet.  explanation of the octet bits:

IP OPTION NUMBERS

The Internet Protocol (IP) has provision for optional header fields
identified by an option type field.  Options 0 and 1 are exactly one
octet which is their type field.  All other options have their one
octet type field, followed by a one octet length field, followed by
length-2 octets of option data.  The option type field is subdivided
into a one bit copied flag, a two bit class field, and a five bit
option number.  These taken together form an eight bit value for the
option type field.  IP options are commonly referred to by this value.


Copy Class Number Value Name                Reference
---- ----- ------ ----- ------------------------------- ---------
   0     0      0     0 EOOL   - End of Options List    [RFC791,JBP]
   0     0      1     1 NOP    - No Operation           [RFC791,JBP]
   1     0      2   130 SEC    - Security                  [RFC1108]
   1     0      3   131 LSR    - Loose Source Route     [RFC791,JBP]
   0     2      4    68 TS     - Time Stamp             [RFC791,JBP]
   1     0      5   133 E-SEC  - Extended Security         [RFC1108]
   1     0      6   134 CIPSO  - Commercial Security           [???]
   0     0      7     7 RR     - Record Route           [RFC791,JBP]
   1     0      8   136 SID    - Stream ID              [RFC791,JBP]
   1     0      9   137 SSR    - Strict Source Route    [RFC791,JBP]
   0     0     10    10 ZSU    - Experimental Measurement      [ZSu]
   0     0     11    11 MTUP   - MTU Probe                 [RFC1191]*
   0     0     12    12 MTUR   - MTU Reply                 [RFC1191]*
   1     2     13   205 FINN   - Experimental Flow Control    [Finn]
   1     0     14   142 VISA   - Experimental Access Control [Estrin]
   0     0     15    15 ENCODE - ???                      [VerSteeg]
   1     0     16   144 IMITD  - IMI Traffic Descriptor        [Lee]
   1     0     17   145 EIP    - Extended Internet Protocol[RFC1385]
   0     2     18    82 TR     - Traceroute        [RFC1393]
   1     0     19   147 ADDEXT - Address Extension    [Ullmann IPv7]
   1     0     20   148 RTRALT - Router Alert              [RFC2113]
   1     0     21   149 SDB    - Selective Directed Broadcast[Graff]
   1     0     22   150 NSAPA  - NSAP Addresses          [Carpenter]
   1     0     23   151 DPS    - Dynamic Packet State        [Malis]
   1     0     24   152 UMP    - Upstream Multicast Pkt. [Farinacci]

[Note, an asterisk (*) denotes an obsoleted IP Option Number.]
TIpProtocol Integer32 (-2 | -1 | 0..255)
IP protocol number. Well known protocol numbers include ICMP(1),
TCP(6), UDP(17).

-1 means value not set.
-2 indicates protocol wildcard for UDP and TCP.
TIpProtocolNumber Integer32 (0..255)
IP protocol number.

Well known protocol numbers include ICMP(1), TCP(6), UDP(17).
TItemDescription DisplayString (SIZE (0..80))
Description for an item.  Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
TItemLongDescription DisplayString
Longer description for an item.  Note, use only NVT ASCII displayable
characters here, no control characters, no UTF-8, etc.
TItemMatch INTEGER

false(2) off(1) true(3)

when set to off, the item is not matched. when set to false, packets
without the item match the filter. when set to true, packets with the
item match the filter.
TItemScope INTEGER

exclusive(1) template(2)

This textual convention determines some aspects of an item's behavior
regarding creation and use, unused entry garbage collection, and
automated promulgation by Element Management System to other systems
in the service domain.

TItemScope applies to SAP-ingress, SAP-egress, and Network policies,
and to IP filters and MAC filters.

exclusive:

    When the scope of an item is defined as exclusive, the item can
    only be applied once, for example to a single SAP.  Attempting
    to assign the policy to a second SAP is not allowed and will
    result in an error.  If the item is removed from the exclusive
    SAP, it will become available for assignment to another
    exclusive SAP.

    A non-applied exclusive scope policy is a candidate to be removed
    from the system by a TBD garbage collection command.

    The system default policies cannot be put into the exclusive scope.
    An error will be generated if scope exclusive is executed in
    any policies with a policy-id equal to 1.

template:

    When the scope of an item is defined as template, the item can be
    applied any number of times.  Policies with template scope
    will not be considered for deletion by a TBD garbage collection
    command; all items of scope 'template' must be deleted explicitly.

    The system default policies will always be scope template.
    An error will occur if a policy-id 1 is attempted to be
    set to scope exclusive.
TItemVeryLongDescription DisplayString (SIZE (0..255))
Longer description for an item.  Note, use only NVT ASCII displayable
characters here, no control characters, no UTF-8, etc.
TLDisplayString OCTET STRING (SIZE (0..1022))

Display hint: 255a

The TLDisplayString is DisplayString of 1022 characters.

Any object defined using this syntax may not exceed 1022 characters in
length.
TLNamedItem DisplayString (SIZE (1..64))
The long name of an item.  When used as an index to a table, the item
name uniquely identifies the instance.  When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters, no UTF-8, etc.
TLNamedItemOrEmpty DisplayString (SIZE (0 | 1..64))
The long name of an item, or an empty string.  When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters, no UTF-8, etc.
TLPolicyNameOrExpOrEmpty TLNamedItemOrEmpty
The long name of a policy statement or an expression or an empty
string.

A logical expression contains terms and operators and can contain
sub-expressions enclosed in round brackets.

A term is a string of type TPolicyStatementName.

An operator can be the string 'AND', 'OR', and 'NOT'.
TLPolicyStatementNameOrEmpty TLNamedItemOrEmpty
The long name of a policy statement, when an object refers to it.
TLevel Integer32 (1..8)
The level of the specified entity while feeding into the parent.
TLevelOrDefault Integer32 (0 | 1..8)
The level of the specified entity while feeding into the parent. The
value 0 is used to denote a default value.
TLspExpValue Integer32 (-1 | 0..7)
MPLS Experimental bits. -1 means not set.
TMacFilterType INTEGER

isid(2) normal(1) vid(3)

A type containing the possible types of MAC filters provided by the
system
TMatchCriteria INTEGER

ip(1) mac(2) none(3)

determines whether the entry matches traffic using IP match entries or
MAC match entries.
TMaxDecRate Integer32 (0 | 1..100000000)
The Advanced Configuration policy Max-Decrement rate to be used in
kbps.
TMcFrQoSProfileId Unsigned32 (0..65535)
This textual convention uniquely identifies Multi-class Frame relay
QoS profiles in the ingress and egress multi-class frame relay QoS
profile tables. The value 0 indicates a default QoS Profile as
applicable to a given hardware.
TMlpppQoSProfileId Unsigned32 (0..65535)
This textual convention uniquely identifies MLPPP Bundle QoS profile
in the ingress and egress MLPPP QoS profile tables. The value 0
indicates default MLPPP QoS Profile as applicable to a given H/W
TNamedItem DisplayString (SIZE (1..32))
The name of an item.  When used as an index to a table, the item
name uniquely identifies the instance.  When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters, no UTF-8, etc.
TNamedItemOrEmpty DisplayString (SIZE (0 | 1..32))
The name of an item, or an empty string.  When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters, no UTF-8, etc.
TNetIngPlcrBurstSizeBytes Integer32 (-1 | 128..4161536)
The amount of buffer space (in bytes) assigned to a queue by policer.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
TNetIngPolicerId Integer32 (1..16)
The data type describes the QoS control policer identifier on network
ingress side.
TNetIngPolicerIdOrNone Integer32 (0 | 1..16)
The data type describes the QoS control policer identifier on network
ingress side or zero when not specified.
TNetworkPolicyID TPolicyID (1..65535 | 65536 | 65537 | 65538 | 65539)
the identification number of a network policy.
TNonZeroWeight Integer32 (1..100)
The weight of the specified entity while feeding into the parent.
TOperator INTEGER

eq(1) gt(4) lt(3) none(0) range(2)

The operator specifies the manner in which a couple of other MIB
objects in the table are supposed to be used.

Operator        Value1               Value2
----------------------------------------------------
none(0)         Any(0)               Any(0)
eq(1)           Specified Value      Any(0)
range(2)        Starting Value       Ending Value
lt(3)           Specified Value      Any(0)
gt(4)           Specified Value      Any(0)

'Any(0)' specifies that, this object can accept any values
 but would default to 0.
TPIRAggRateLimitOverride Integer32 (-2 | -1 | 1..800000000)
The PIR rate to be used in kbps. The value -1 means maximum rate. A
value of -2 specifies no override.
TPIRPercentOverride Integer32 (-2 | 1..10000)
The PIR percentage rate specified in centipercent. A value of -2
specifies no override.
TPIRRate Integer32 (-1 | 1..100000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
TPIRRateOrZero Integer32 (-1 | 0..100000000)
The PIR rate to be used in kbps. The value -1 means maximum rate. The
value 0 means undefined rate.
TPIRRateOverride Integer32 (-2 | -1 | 1..100000000)
The PIR rate to be used in kbps. The value -1 means maximum rate. A
value of -2 specifies no override.
TPIRRatePercent Integer32 (1..100)
The percentage of maximum PIR rate allowed. A value of 0 is not
acceptable, so the range begins at 1.
TPSPRateType INTEGER

kbps(1) percentLagActive(3) percentLocal(2)

The type of the PIR/CIR rate being applied to port scheduler policy.
The value of 'kbps' means the rate is specified in kbps. The value of
'percentActivePortLimit' means the rate is specified in percentage of
active port bandwidth, that is, bandwidth of active ports in a LAG.
TPerPacketOffset Integer32 (-32..31)
The value, in bytes, of the adjustment to make to the size of each
packet for accounting.
TPerPacketOffsetOvr Integer32 (-128 | -32..31)
The value, in bytes, of the override of the adjustment to make to the
size of each packet for accounting. A value of -128 indicates no
override.
TPktByteOffset Integer32 (-60 | -56 | -52 | -48 | -44 | -40 | -36 | -32 | -28 | -24 | -20 | -16 | -12 | -8 | -4 | 0 | 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64)
The value, in bytes, of the adjustment to make to the size of each
packet.
TPlcrBurstSizeBytes Integer32 (-1 | 0..16777216)
The amount of buffer space (in bytes) assigned to a queue by policer.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
TPlcrBurstSizeBytesOverride Integer32 (-2 | -1 | 0..16777216)
The amount of buffer space (in bytes) assigned to a queue by policer.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value. A value of -2 specifies
no override.
TPlcyAcctPolicerId Unsigned32 (1..63)
The data type describes the router policer accounting template policer
identifier.
TPolRateTypeRefOrLocalLimit INTEGER

kbps(1) percentLocalLimit(2) percentReferPortLimit(3)

The type of the PIR/CIR percent rate. The value 'kbps' means the rate
is specified in kbps. The value 'percentLocalLimit' means the rate is
specified in percentage of local limit. The value
'percentReferPortLimit' means the rate is specified in percentage of
reference port limit.
TPolicerBurstSizeBytes Integer32 (-1 | 0..268435456)
The amount of buffer space (in bytes) assigned to a queue by policer.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
TPolicerBurstSizeBytesOverride Integer32 (-2 | -1 | 0..268435456)
The amount of buffer space (in bytes) assigned to a queue by policer.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value. A value of -2 specifies
no override.
TPolicerRateType INTEGER

kbps(1) percentLocalLimit(2)

The type of the PIR/CIR percent rate. The value 'kbps' means the rate
is specified in kbps. The value 'percentLocalLimit' means the rate is
specified in percentage of local limit.
TPolicerRateTypeWithRefLimit INTEGER

kbps(1) percentLocalLimit(3) percentPortLimit(2) percentReferPortLimit(4)

The type of the PIR/CIR percent rate. The value 'kbps' means the rate
is specified in kbps. The value 'percentPortLimit' means the rate is
specified in percentage of port limit. The value 'percentLocalLimit'
means the rate is specified in percentage of local limit. The value
'percentReferPortLimit' means the rate is specified in percentage of
reference port limit.
TPolicerWeight Integer32 (1..100)
The relative weight of the specified entity while feeding into the
parent.
TPolicyID Unsigned32 (0..65535 | 65536 | 65537 | 65538 | 65539 | 65540)
The identification number of a policy.
TPolicyStatementName TNamedItem
The name of a policy statement, when used as index in a table.
TPolicyStatementNameOrEmpty TNamedItemOrEmpty
The name of a policy statement, when an object refers to it.
TPortQosCIRRate Unsigned32 (0..10000)
The Committed Information Rate (CIR) rate to be used in kbps.
TPortQosPIRRate Unsigned32 (1..10000)
The Peak Information Rate (PIR) rate to be used in kbps.
TPortSchedLevel Integer32 (1..8)
The priority level for the specified port scheduler entity.
TPortSchedulerAggRateLimitPIR Integer32 (-1 | 1..800000000)
The Peak Information Rate (PIR) rate to be used in kbps. The value -1
means maximum rate.
TPortSchedulerCIR Integer32 (-1 | 0..800000000)
The Committed Information Rate (CIR) rate to be used in kbps. The
value -1 means maximum rate.
TPortSchedulerPIR Integer32 (-1 | 1..100000000)
The Peak Information Rate (PIR) rate to be used in kbps. The value -1
means maximum rate.
TPortSchedulerPIRRate Integer32 (-1 | 1..800000000)
The Peak Information Rate (PIR) rate to be used in kbps. The value -1
means maximum rate.
TPrecValue Integer32 (0..7)
The precedence bits as used in the IPv4 header. This constitutes of 3
bits and hence can hold the values from 0 to 7.
TPrecValueOrNone Integer32 (-1 | 0..7)
The precedence bits as used in the IPv4 header. This constitutes of 3
bits and hence can hold the values from 0 to 7. The value '-1'
specifies that the precedence value is undefined/unused.
TPriority INTEGER

high(2) low(1)

the priority to apply to a packet
TPriorityOrDefault INTEGER

default(3) high(2) low(1)

the priority to apply to a packet. when set to default(3), the
priority from the default action is used.
TPriorityOrUndefined INTEGER

high(2) low(1) undefined(0)

the priority to apply to a packet. when set to undefined(0), the
priority is not applicable.
TProfile INTEGER

in(1) out(2)

the profile marking of a packet at the ingress.
TProfileOrNone INTEGER

in(1) none(0) out(2)

Profile marking of a packet.
TQGroupType INTEGER

port(0) vpls(1)

This textual convention specifies the type of the Queue-Group.
TQosHwAggShaperSchedClass Integer32 (1..6)
The scheduling class for the specified hardware aggregate shaper
scheduler entity.
TQosIngressPolicyID TPolicyID
The identification number of a QoS ingress policy.
TQosOverrideType INTEGER

aggRateLimit(3) arbiter(4) policer(2) queue(1) scheduler(5) slaAggRateLimit(6) wrrGroup(7)

This textual convention specifies the type of the Qos Override.
TQosOverrideTypeId Integer32 (0..63)
This textual convention indicates the identifier of the queue or
policer that is overridden, or zero if the item that is overridden is
not a queue or a policer.
TQosQGrpInstanceIDorZero Unsigned32 (0 | 1..65535)
The identification number of a QoS queue group instance.

The value of '0' indicates the system determined default value.
TQosQueueCIRRate Integer32 (-1 | 0..2000000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
TQosQueueCIRRateOverride Integer32 (-2 | -1 | 0..2000000000)
The CIR rate to be used in kbps. The value -1 means maximum rate. A
value of -2 specifies no override.
TQosQueuePIRRate Integer32 (-1 | 1..2000000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
TQosQueuePIRRateOverride Integer32 (-2 | -1 | 1..2000000000)
The PIR rate to be used in kbps. The value -1 means maximum rate. A
value of -2 specifies no override.
TQueueId Integer32 (0 | 1..32)
The value of TQueueId specifies the identification number of a
queue.  A value of zero (0) indicates that no specific queue
identification has been assigned for this object. When an object
of type TQueueId is an SNMP table index, an index value of zero
(0) is not allowed and a noCreation error will be returned.
TQueueIdOrAll Integer32 (-1 | 0 | 1..32)
The value of TQueueIdOrAll specifies the identification number of a
queue

A value of zero (0) indicates that no specific queue identification
has been assigned for this object.

A value of (-1) indicates 'all queues'.
TQueueMode INTEGER

priority(1) profile(2)

The mode in which the queue is operating.

If the queue is operating in the 'priority' mode, it is capable of
handling traffic differently with two distinct priorities. These
priorities are assigned by the stages preceding the queueing framework
in the system.

When the queue is operating in the 'profile' mode, in other words the
color aware mode, the queue tries to provide the appropriate bandwidth
to the packets with different profiles.

The profiles are assigned according to the configuration of the
forwarding class or the sub-forwarding class.

In 'priority' mode, the queue does not have the functionality to
support the profiled traffic and in such cases the queue will have a
degraded performance. However, the converse is not valid and a queue
in 'profile' mode should be capable of supporting the different
priorities of traffic.
TQueueStatModeFormat INTEGER

priority(1) profile(2) v4V6(3)

The mode in which the queue stats are collected.

In 'priority' mode separate stats are collected for high and low
priority packets/octets.

In 'profile' mode separate stats are collected for in profile and out
of profile packets/octets.

In 'v4V6' mode separate stats are collected for IPv4 and IPv6
packets/octets
TRatePercent Integer32 (0..100)
The percentage of maximum rate allowed.
TRateType INTEGER

kbps(1) percent(2)

The type of the PIR/CIR rate. The value 'kbps' means the rate is
specified in kbps. The value 'percent' means the rate is specified in
percentage
TRegularExpression DisplayString
A regular expression string.
TRemarkType INTEGER

dscp(2) none(1) precedence(3)

The remarking to be used.
TResolveStatus INTEGER

any(2) disabled(0) filter(1) match-family-ip(3)

The TResolveStatus indicates resolution status of the tunnels.
TSapEgrEncapGroupActionType INTEGER

create(1) destroy(2)

TSapEgrEncapGroupActionType identifies Encapsulation group action type
on SAP egress. It is used to create or destroy row entries in an
associated table.
TSapEgrEncapGroupType INTEGER

isid(1)

TSapEgrEncapGroupType identifies Encapsulation group type on SAP
egress.
TSapEgrEncapGrpQosPolicyIdOrZero Unsigned32 (0 | 1..65535)
TSapEgrEncapGrpQosPolicyIdOrZero identifies SAP egress Encapsulation
group QoS policy.

The value '0' indicates no QoS policy is set.
TSapEgressPolicyID TPolicyID (1..65535 | 65536 | 65537 | 65538 | 65539)
The identification number of a SAP egress policy.
TSapIngressPolicyID TPolicyID
The identification number of a SAP ingress policy.
TSchedulerMode INTEGER

none(0) vlanQos(1)

The shared queue scheduler mode.
TSdpEgressPolicyID TPolicyID
The identification number of a SDP egress network policy.
TSdpIngressPolicyID TPolicyID
The identification number of a SDP ingress network policy.
TSecondaryShaper10GPIRRate Integer32 (-1 | 1..10000)
The secondary shaper PIR rate to be used in Mbps. The value -1 means
maximum rate.
TSiteOperStatus INTEGER

down(2) outOfResource(3) up(1)

TSiteOperStatus data type is an enumerated integer that describes the
values used to identify the current operational state of a site.
TSrv6EndpointBehavior INTEGER

end(1) endB6Encaps(14) endB6EncapsRed(27) endBM(15) endDT2M(24) endDT2U(23) endDT4(19) endDT46(20) endDT6(18) endDX2(21) endDX2V(22) endDX4(17) endDX6(16) endNxtCsid(43) endNxtCsidPsp(44) endNxtCsidPspUsd(48) endNxtCsidPspUsp(46) endNxtCsidPspUspUsd(50) endNxtCsidUsd(47) endNxtCsidUsp(45) endNxtCsidUspUsd(49) endNxtOnlyCsid(42) endPsp(2) endPspUsd(29) endPspUsp(4) endPspUspUsd(31) endT(9) endTPsp(10) endTPspUsd(37) endTPspUsp(12) endTPspUspUsd(39) endTUsd(36) endTUsp(11) endTUspUsd(38) endUsd(28) endUsp(3) endUspUsd(30) endX(5) endXNxtCsid(52) endXNxtCsidPsp(53) endXNxtCsidPspUsd(57) endXNxtCsidPspUsp(55) endXNxtCsidPspUspUsd(59) endXNxtCsidUsd(56) endXNxtCsidUsp(54) endXNxtCsidUspUsd(58) endXNxtOnlyCsid(51) endXPsp(6) endXPspUsd(33) endXPspUsp(8) endXPspUspUsd(35) endXUsd(32) endXUsp(7) endXUspUsd(34) none(0)

The SRv6 endpoint behaviors.
TSrv6Function INTEGER

end(0) end-b6-encaps-red(16) end-b6-encaps-red-next-csid(17) end-dt2m(7) end-dt2u(6) end-dt4(2) end-dt46(4) end-dt6(3) end-dx2(5) end-x(1) endReplicate(18) ua(9) udt2m(15) udt2u(14) udt4(10) udt46(12) udt6(11) udx2(13) un(8)

The function for srv6.
TSrv6FunctionErrorCode INTEGER

error(1) fpeOperDown(5) locAdminDown(3) microSegBlockAdminDown(6) noError(0) noIntConfig(4) noResource(2)

The error-code for the function.
TSrv6FunctionType INTEGER

dynamic(1) none(0) static(2)

The type of function to be assigned to all routes for the instance.
TSrv6FunctionValue Unsigned32 (0..1048575)
The value to be assigned to all routes for the instance.
TSrv6LocatorType INTEGER

locator(0) microSegmentLocator(1)

TSrv6ResourceType INTEGER

function(1) label(2) lif(3)

TSrv6RouteResolution INTEGER

fallbackTunnelToRouteTable(2) routeTable(0) tunnelTable(1)

Route resolution options. The options are as follows:

routeTable: only resolve to an IPv6 route in RTM. If none is found,
then resolution will fail.

tunnelTable: only try to resolve the route to a tunnel in TTMv6 i.e.
the system will try to find an SRv6 policy with a matching color and
endpoint locator for BGP routes received with an SRv6 TLV and
therefore containing an SRv6 service SID in TTMv6. If none is found,
then resolution will fail.

fallbackTunnelToRouteTable: First try to resolve the route to a tunnel
in TTMv6. If none is found, then fall back to resolution in RTM. If
none is still found, then resolution will fail.
TStormCtrlBurst Integer32 (-1 | 1..4096)
The storm control burst in kilobytes.

A value of '-1' means that the storm control burst is set to max.
TStormCtrlOprBurst Integer32 (-1 | 0 | 1..4161)
The storm control burst in kilobytes.

A value of '-1' means that the storm control burst is set to max.
TStormCtrlOprRate Integer32 (-1 | 0 | 22..720000000)
The storm control rate in kbps.

A value of '-1' means that the storm control burst is set to max.
TStormCtrlRate Integer32 (-1 | 22..720000000)
The storm control rate in kbps.

A value of '-1' means that the storm control burst is set to max.
TStormCtrlTrafficType INTEGER

broadcast(1) multicast(2) unicast(3) unknown(4)

The port storm control traffic type.
TSubHostId Unsigned32
A number used to uniquely identify a subscriber host in the system
TTcpUdpPort Integer32 (0 | 1..65535)
The number of a TCP or UDP port. Well known port numbers include
ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110),
nntp(119), snmp(161), snmptrap(162), etc.
TTcpUdpPortOperator TOperator
The operator used for checking on TCP/UDP ports values and ranges
TTmplPolicyID Unsigned32 (0..65535)
The identification number of a policy for template objects.
TWeight Integer32 (0..100)
The weight of the specified entity while feeding into the parent.
TWeightOverride Integer32 (-2 | 0..100)
The weight of the specified entity while feeding into the parent. A
value of -2 specifies no override.
TWredSlopeProfile INTEGER

exceed(4) in(1) inplus(5) out(2)

The profile marking of a packet. Value of 'in' specifies in-profile
marking. Value of 'out' specifies out-profile marking. Value of 'none'
specifies the profile marking of the packet will be inherited from the
existing enqueuing priority derived from earlier matches in the
classification hierarchy.
TXLNamedItem DisplayString (SIZE (1..255))
The extra long name of an item.  When used as an index to a table,
the item name uniquely identifies the instance. When used in a
reference (TXLNamedItemOrEmpty) the item name entry must
exist in the table.

Note, use only NVT ASCII displayable characters here, no control
characters, no UTF-8, etc.
TXLNamedItemOrEmpty DisplayString (SIZE (0 | 1..255))
The extra long name of an item, or an empty string.  When used in a
reference (TXLNamedItemOrEmpty) the item name entry must exist in
the table.

Note, use only NVT ASCII displayable characters here, no control
characters, no UTF-8, etc.
TXLPolicyNameOrExpOrEmpty TXLNamedItemOrEmpty
The extra long name of a policy statement or an expression or an empty
string.

A logical expression contains terms and operators and can contain
sub-expressions enclosed in round brackets.

A term is a string of type TPolicyStatementName.

An operator can be the string 'AND', 'OR', and 'NOT'.
TmnxAccPlcyAACounters Bits

any(0) ldf(17) mdf(16) naf(6) nba(10) nbd(14) nbm(23) nfa(2) nfc(27) nfd(4) nmt(25) npa(8) npd(12) npm(24) saf(5) sba(9) sbd(13) sbm(20) sdf(15) sfa(1) sfc(26) sfd(3) smt(22) spa(7) spd(11) spm(21) tfc(19) tfd(18)

This data type describes a set of AA (Application Assurance) counters
for which accounting data can be collected.

The bits are defined as follows:
      any (0)  -  enables reporting when there is a change
                  to any counter
      sfa (1)  -  allowed flows from sub
      nfa (2)  -  allowed flows to sub
      sfd (3)  -  denied flows from sub
      nfd (4)  -  denied flows to sub
      saf (5)  -  active flows from sub
      naf (6)  -  active flows to sub
      spa (7)  -  total packets from sub
      npa (8)  -  total packets to sub
      sba (9)  -  total bytes from sub
      nba (10) -  total bytes to sub
      spd (11) -  total discard packets from sub
      npd (12) -  total discard packets to sub
      sbd (13) -  total discard bytes from sub
      nbd (14) -  total discard bytes to sub
      sdf (15) -  short  duration flows
      mdf (16) -  medium duration flows
      ldf (17) -  long   duration flows
      tfd (18) -  total flow duration
      tfc (19) -  total flows completed
      sbm (20) -  max throughput in bytes from sub
      spm (21) -  max throughput in packets from sub
      smt (22) -  max throughput timestamp from sub
      nbm (23) -  max throughput in bytes to sub
      npm (24) -  max throughput in packets to sub
      nmt (25) -  max throughput timestamp to sub
      sfc (26) -  forwarding class from sub
      nfc (27) -  forwarding class to sub
TmnxAccPlcyAASubAttributes Bits

appProfile(0) appServiceOption(1)

This data type describes a set of AA (Application Assurance)
subscriber attributes which must be included in accounting data.

The bits are defined as follows:
     appProfile       (0)  - application profile
     appServiceOption (1)  - application service option
TmnxAccPlcyOECounters Bits

iod(5) iof(4) ipd(1) ipf(0) ood(7) oof(6) opd(3) opf(2)

This data type describes a set egress counters for which accounting
data can be collected associated with a given counter.
TmnxAccPlcyOICounters Bits

aoo(1) apo(0) hod(4) hpd(2) iof(8) ipf(6) lod(5) lpd(3) oof(9) opf(7)

This data type describes a set ingress counters for which accounting
data can be collected associated with a given counter.
TmnxAccPlcyPolicerECounters Bits

iod(5) iof(11) ioo(4) ipd(1) ipf(10) ipo(0) ood(7) oof(13) ooo(6) opd(3) opf(12) opo(2) pod(24) pof(25) poo(23) ppd(21) ppf(22) ppo(20) uco(9) ucp(8) xod(18) xof(19) xoo(17) xpd(15) xpf(16) xpo(14)

This data type describes a set of egress counters for which accounting
data can be collected associated with a given policer.

 ipo  : In-profile Packets Offered
 ipd  : In-profile Packets Discarded
 opo  : Out-profile Packets Offered
 opd  : Out-profile Packets Discarded
 ioo  : In-profile Octets Offered
 iod  : In-profile Octets Discarded
 ooo  : Out-profile Octets Offered
 ood  : Out-profile Octets Discarded
 ucp  : Uncoloured Packets Offered
 uco  : Uncoloured Octets Offered
 ipf  : In-profile Packets Forwarded
 iof  : In-profile Octets Forwarded
 opf  : Out-Profile Packets Forwarded
 oof  : Out-Profile Octets Forwarded
 xpo  : Exceed-profile Packets Offered;
 xpd  : Exceed-profile Packets Discarded;
 xpf  : Exceed-profile Packets Forwarded;
 xoo  : Exceed-profile Octets Offered;
 xod  : Exceed-profile Octets Discarded;
 xof  : Exceed-profile Octets Forwarded;
 ppo  : In-plus-profile Packets Offered;
 ppd  : In-plus-profile Packets Discarded;
 ppf  : In-plus-profile Packets Forwarded;
 poo  : In-plus-profile Octets Offered;
 pod  : In-plus-profile Octets Discarded;
 pof  : In-plus-profile Octets Forwarded;
TmnxAccPlcyPolicerICounters Bits

iod(5) iof(11) ioo(4) ipd(1) ipf(10) ipo(0) ood(7) oof(13) ooo(6) opd(3) opf(12) opo(2) uco(9) ucp(8)

This data type describes a set of ingress counters for which
accounting data can be collected associated with a given policer.

ipo : In-profile Packets Offered
ipd : In-profile Packets Discarded
opo : Out-profile Packets Offered
opd : Out-profile Packets Discarded
ioo : In-profile Octets Offered
iod : In-profile Octets Discarded
ooo : Out-profile Octets Offered
ood : Out-profile Octets Discarded
ucp : Uncoloured Packets Offered
uco : Uncoloured Octets Offered
ipf : In-profile Packets Forwarded
iof : In-profile Octets Forwarded
opf : Out-profile Packets Forwarded
oof : Out-profile Octets Forwarded.
TmnxAccPlcyQECounters Bits

iod(5) iof(4) ipd(1) ipf(0) ood(7) oof(6) opd(3) opf(2)

This data type describes a set egress counters for which accounting
data can be collected associated with a given queue.
TmnxAccPlcyQICounters Bits

aoo(7) apo(6) hod(10) hoo(3) hpd(8) hpo(0) iof(14) ipf(12) lod(11) loo(4) lpd(9) lpo(1) oof(15) opf(13) uco(5) ucp(2)

This data type describes a set ingress counters for which accounting
data can be collected associated with a given queue.

aal5(0) ethernet(1)

The data type TmnxAccessLoopEncapDataLink specifies the data link used
by the subscriber on the DSL access loop.
TmnxAccessLoopEncaps1 INTEGER

notAvailable(0) singleTaggedEthernet(2) untaggedEthernet(1)

The data type TmnxAccessLoopEncaps1 specifies the encapsulation used
by the subscriber on the DSL access loop.
TmnxAccessLoopEncaps2 INTEGER

ethernetOverAal5LlcFcs(5) ethernetOverAal5LlcNoFcs(6) ethernetOverAal5NullFcs(7) ethernetOverAal5NullNoFcs(8) ipoaLlc(3) ipoaNull(4) notAvailable(0) pppoaLlc(1) pppoaNull(2)

The data type TmnxAccessLoopEncaps2 specifies the encapsulation used
by the subscriber on the DSL access loop.
TmnxActionType INTEGER

doAction(1) notApplicable(2)

The TmnxActionType data type is an enumerated integer
that describes the values used to support action or
operation style commands.  Setting a variable of this
type to 'doAction' causes the action to occur.  GETs and
GETNEXTs on this variable return 'not-applicable'.
TmnxAddressAndMaskOrPrefixAddress InetAddress
TmnxAddressAndMaskOrPrefixMask InetAddress
TmnxAddressAndMaskOrPrefixPrefix InetAddressPrefixLength
TmnxAddressAndMaskOrPrefixType InetAddressType
TmnxAddressAndPrefixAddress InetAddress
TmnxAddressAndPrefixPrefix InetAddressPrefixLength
TmnxAddressAndPrefixType InetAddressType
TmnxAddressWithZoneAddress InetAddress
TmnxAddressWithZoneType InetAddressType
TmnxAdjacencySetFamilyType INTEGER

ipv4(0) ipv6(1)

The data type to specify Adjacency Set family.
TmnxAdminState INTEGER

inService(2) noop(1) outOfService(3)

The TmnxAdminState data type is an enumerated integer that describes
the values used to identify the administratively desired state of
functional modules.
TmnxAdminStateTruthValue TruthValue
TmnxAdminStateTruthValue data type is an TruthValue object used to
identify the administrative state of a snmp row.

A value of 'true' means the snmp row is administrative 'up'.
TmnxAdminStateUpDown INTEGER

down(2) up(1)

TmnxAdminStateUpDown data type is an enumerated integer that describes
the values used to identify the administrative state of a snmp row.
TmnxAiiType INTEGER

aiiType1(1) aiiType2(2)

TmnxAiiType indicates LDP FEC 129 Attachment Individual Identifier
(AII) type.
TmnxAlgorithmId Unsigned32 (0..255)
TmnxAlgorithmId identifies a specific Algorithm in the system.

The value can identify a defined IGP Algorithm (value 0 is SPF) or a
Flexible Algorithm (range 128..255).
TmnxAncpString DisplayString (SIZE (1..63))
The TmnxAncpString data type contains a valid ancp string.
TmnxAncpStringOrZero DisplayString (SIZE (0..63))
The TmnxAncpStringOrZero data type contains a valid ancp string. An
empty string indicates that no ANCP string is defined.
TmnxAppProfileString DisplayString (SIZE (1..32))
The data type TmnxAppProfileString denotes the application profile
string.
TmnxAppProfileStringOrEmpty DisplayString (SIZE (0..32))
The data type TmnxAppProfileStringOrEmpty denotes the application
profile string. The empty string denotes the absence of a application
profile.
TmnxAsciiSpecification DisplayString (SIZE (0..255))
The data type TmnxAsciiSpecification is a format string that specifies
how to form a target ASCII string.

The format is as follows:

<ascii-specification> ::= <char-specification>+

<char-specification>  ::= <ascii-char> | <char-origin>

<char-origin>         ::= '%' <origin>

<ascii-char> refers to a printable ASCII character.

Examples and supported char-origin specifiers are supplied with the
object definitions.
TmnxAttrSetImport INTEGER

accept(2) drop(3) ignore(1)

The TmnxAttrSetImport data type is an enumerated integer that
specifies the action taken in attribute-set import:
-ignore    (1): instructs BGP to ignore ATTR_SET in VPN-IP routes when
                importing them into this specific VPRN; the ATTR_SET attribute
                is transmitted unchanged to the CE (default for backwards compatibility).
-accept    (2): instructs BGP to process ATTR_SET in VPN-IP routes when importing them
                into this specific VPRN; as part of the normal processing, the ATTR_SET
                attribute is removed before the route is advertised to CEs.
-drop      (3): instructs BGP to ignore ATTR_SET in VPN-IP routes when importing them
                into this specific VPRN; the ATTR_SET attribute is removed before
                the route is advertised to CEs
TmnxAuthAlgorithm INTEGER

aesXcbc(7) authEncryption(8) md5(2) null(1) sha1(3) sha256(4) sha384(5) sha512(6)

TmnxAuthAlgorithm data type is an enumerated integer that describes
the values used to identify the hashing algorithm.

Value Descriptions:

null           - Choosing this value configures the high-speed
                 null algorithm, which does nothing. This is same
                 as not having authentication turned on, same as
                 turning the protocol off.

md5            - Choosing this value configures the use of
                 hmac-md5 algorithm for authentication.

sha1           - Choosing this value configures the use of
                 hmac-sha1 algorithm for authentication.

sha256         - Choosing this value configures the use of
                 hmac-sha256 algorithm for authentication.

sha384         - Choosing this value configures the use of
                 hmac-sha384 algorithm for authentication.

sha512         - Choosing this value configures the use of
                  hmac-sha512 algorithm for authentication.

aesXcbc        - Choosing this value configures the use of
                 aes-xcbc(RFC3566) algorithm for authentication.

authEncryption - Choosing this value configures the use of
                 Authenticated Encryption (AE) algorithm for
                 authentication.
TmnxAuthPassword DisplayString (SIZE (0..64))
The TmnxAuthPassword data type contains a password used for
authentication of subscribers.
TmnxBGPFamilyType Bits

bgpLs(20) evpn(19) flowVpnIpv4(24) flowVpnIpv6(25) ipv4Flow(13) ipv4MplsLabel(3) ipv4Multicast(1) ipv4Mvpn(11) ipv4UastMcast(2) ipv4Unicast(0) ipv4Vpn(4) ipv6Flow(18) ipv6MplsLabel(8) ipv6Multicast(6) ipv6UcastMcast(7) ipv6Unicast(5) ipv6Vpn(9) l2Vpn(10) mcastVpnIpv4(16) mcastVpnIpv6(21) mdtSafi(14) msPw(12) mvpnIpv6(17) routeTarget(15) srplcyIpv4(22) srplcyIpv6(23)

The value of TmnxBGPFamilyType specifies the AFI-SAFI family for BGP
peer.
TmnxBfdEncap INTEGER

ipv4(1)

The TmnxBfdEncap data type is an enumerated integer indicating
encapsulation used for in the BFD operation.
TmnxBfdIntfSessOperState INTEGER

broken(3) connected(2) noResources(6) notConfigured(5) peerDetectsDown(4) unknown(1)

The TmnxBfdIntfSessOperState data type is an enumerated integer that
describes the values used to identify the operational state of a BFD
session is relying upon for its fast triggering mechanism.
TmnxBfdOnLspSessFecType INTEGER

bgp(3) ldp(2) rsvp(1) srPolicy(5) srTe(4) srv6(6)

An object of type TmnxBfdOnLspSessFecType indicates the Forwarding
Equivalence Class (FEC) type of a Bidirectional Forwarding Detection
(BFD) session running on an LSP.
TmnxBfdSessOperFlags Bits

adminClear(7) echoFailed(2) fwdPlaneReset(4) misConnDefect(8) nbrAdminDown(6) nbrSignalDown(3) noHeartBeat(1) noProtocols(0) pathDown(5)

The value of TmnxBfdSessOperFlags indicates the reasons why a BFD
session is not up.
TmnxBfdSessOperState INTEGER

broken(3) connected(2) noResources(6) notConfigured(5) peerDetectsDown(4) unknown(1)

The TmnxBfdSessOperState data type is an enumerated integer that
describes the values used to identify the operational state of a BFD
session the instance is relying upon for its fast triggering
mechanism.
TmnxBfdSessProtocolState INTEGER

adminDown(0) down(1) init(2) up(3)

The TmnxBfdSessProtocolState data type is an enumerated integer that
describes the state of the BFD protocol.
TmnxBfdSessionProtocols Bits

bgp(6) bgpLsp(21) bier(28) ipsecTunnel(11) isis(2) lag(16) ldp(10) ldpLsp(20) mcIpsec(13) mcMobile(14) mcRing(4) mcep(9) mplsLsp(24) mplsTp(15) opergrp(17) ospfv2(0) ospfv3(12) pfcp(29) pim(1) reserved25(25) rip(22) ripng(23) rsvp(5) rsvpLsp(19) srPolicy(26) srrp(8) staticRoute(3) treeSid(27) vccv(18) vrrp(7)

This data type indicates what protocols are using a BFD session.
TmnxBfdTermination INTEGER

cpm(2) cpmNp(3) fp(4) iom(1)

The TmnxBfdTermination data type is an enumerated integer that indicates
the termination of the BFD session as follows:
   'iom (1)'   - termination on the IOM card main processor,
   'cpm (2)'   - termination on the CPM card main processor,
   'cpmNp (3)' - termination on the CPM card Network Processor,
   'fp(4)'     - termination on the forwarding plane
TmnxBgpAutonomousSystem Integer32 (0..65535)
an autonomous system (AS) number.
TmnxBgpEvpnAcEthTag Integer32 (0..16777215)
The TmnxBgpEvpnAcEthTag indicates ethernet tag value of the BGP EVPN
attachment circuit.
TmnxBgpLocalPreference Unsigned32
a local route preference value.
TmnxBgpPreference Unsigned32 (0..255)
a route preference value.
TmnxBgpRouteTarget OCTET STRING (SIZE (1..32))
TmnxBgpRouteTarget is an readable string that specifies the extended
community name to be accepted by a Route Reflector Server or
advertised by the router when reflecting any routes. I.e, it does not
apply to routes that are not reflected by the router.
TmnxBinarySpecification DisplayString (SIZE (0..255))
The data type TmnxBinarySpecification is a string of ASCII characters
that specifies how to form a binary number.

The format is as follows:

<binary-specification> ::= <bit-specification>+

<bit-specification>    ::= '0' | '1' | <bit-origin>

<bit-origin>           ::= '*' <number-of-bits> <origin>

<number-of-bits>       ::= [1..32]

Examples and supported bit-origin specifiers are supplied with the
object definitions.
TmnxBofDisplayStringURL DisplayString (SIZE (0..199))
A string that represents an URL in the BOF. If the URL contains login
information in the form of 'username:password' this login information
will be blanked out in the SNMP get response, by replacing the login
information with '*:*'.
TmnxBsxAaGrpPartIndexOrZero Unsigned32 (0..16777215)
TmnxBsxAaGrpPartIndexOrZero is an index of an Application Assurance
partition within an Application Assurance group, and is a unique
32-bit number encoded as follows.

| 32   25 | 24    9 | 8      1 |
+---------+---------+----------+
|    0    | partidx |  groupidx|  Partition Index
+---------+---------+----------+

- groupidx represents a group of ISA MDAs and has
 a valid range from 1..255. The corresponding
 TIMETRA-BSX-NG-MIB::tmnxBsxIsaAaGroupIndex must
 already exist in the tmnxBsxIsaAaGrpTable.

- partidx represents a partition within a group and
 has a valid range from 0..65535. A partition index
 of '0' represents group wide information.

The value of zero indicates that no Application Assurance partition is
specified
TmnxBsxAaSubHttpUrlParam DisplayString (SIZE (0..247))
Optional text string used to customize the URL used for Application
Assurance HTTP In-Browser Notification and automatically appended at
the end of the notification script URL as an argument.
TmnxBsxAarpId Unsigned32 (1..65535)
TmnxBsxAarpId identifies an instance of the AA Redundancy Protocol
(AARP).
TmnxBsxAarpIdOrZero Unsigned32 (0 | 1..65535)
TmnxBsxAarpIdOrZero identifies an instance of the AA Redundancy
Protocol (AARP).

The value of '0' indicates an invalid AARP instance.
TmnxBsxAarpServiceRefType INTEGER

dualHomed(1) dualHomedSecondary(4) none(0) shuntNetworkSide(3) shuntSubscriberSide(2)

TmnxBsxAarpServiceRefType identifies the role of the SAP or Spoke SDP
service point being referenced by an AARP instance. This reference is
made in the context of a AARP instance identified by
TmnxBsxAarpIdOrZero.

The service reference types are:

none(0)                - service reference type is not applicable.

dualHomed(1)           - the service reference point is a SAP or
                         Spoke SDP connected into a dually homed
                         network being protected by the AARP instance.

shuntSubscriberSide(2) - the service reference point is a Spoke SDP
                         acting as a subscriber side shunt used by
                         the AARP instance. A subscriber side shunt
                         carries the local from/to subscriber
                         traffic when AA is performed remotely.

shuntNetworkSide(3)    - the service reference point is a Spoke SDP
                         acting as a network side shunt used by
                         the AARP instance. A network side shunt
                         carries the local from/to network
                         traffic when AA is performed remotely.

dualHomedSecondary(4)  - the secondary service reference point is a
                         SAP or Spoke SDP connected into a dually
                         homed network being protected by the AARP
                         instance. It functions as a backup to the
                         'dualHomed(1)' primary reference point.

For the case when TmnxBsxAarpIdOrZero refers to the invalid AARP
instance '0', the service reference type is 'none(0)'.
TmnxBsxIsaAaGroupIndexOrZero Unsigned32 (0..255)
TmnxBsxIsaAaGroupIndexOrZero is an index of a group of BSX MDAs. The
value of zero indicates that no BSX MDA group is specified.
TmnxBsxTransPrefPolicyId Unsigned32 (1..65535)
TmnxBsxTransPrefPolicyId identifies a transit prefix policy.
TmnxBsxTransPrefPolicyIdOrZero Unsigned32 (0 | 1..65535)
TmnxBsxTransPrefPolicyId identifies a transit prefix policy.

The value '0' indicates an invalid transit prefix policy.
TmnxBsxTransitIpPolicyId Unsigned32 (1..65535)
TmnxBsxTransitIpPolicyId identifies a transit IP policy.
TmnxBsxTransitIpPolicyIdOrZero Unsigned32 (0 | 1..65535)
TmnxBsxTransitIpPolicyId identifies a transit ip policy.

The value '0' indicates an invalid transit IP policy.
TmnxCBFClasses Bits

af(2) be(0) defaultLsp(8) ef(5) h1(6) h2(4) l1(3) l2(1) nc(7)

The TmnxCBFClasses indicates a set of forwarding classes.
TmnxCamOverloadState INTEGER

nearFull(2) operational(1) overload(3)

The TmnxCamOverloadState data type is an enumerated integer that
specifies the CAM overload state.
TmnxCdrDiagnosticAction INTEGER

excluded(2) included(1)

The TmnxCdrDiagnosticAction is an enumerated integer that describes
whether the Diagnostics should be included or excluded in the Charging
Data Record (CDR).
TmnxCdrType INTEGER

eGCdr(3) gCdr(2) pgwCdr(1)

The TmnxCdrType is an enumerated integer that describes the current
charging type in Charging Data Record (CDR).

pgwCdr - indicates Packet data network Gateway CDR
gCdr - indicates Gateway GPRS Support Node (GGSN) CDR, where
          GPRS stands for General Packet Radio Service.
eGCdr - indicates Enhanced Gateway GPRS Support Node (GGSN) CDR.
TmnxCertUpdateStatus INTEGER

inProgress(2) invalid(0) scheduled(1) waitForRetry(3)

The TmnxCertUpdateStatus data type is an enumerated integer that
specifies the cert update status.
TmnxCliEngine INTEGER

classicCli(1) mdCli(2) systemDerived(3)

The value of TmnxCliEngine specifies the CLI engine type.
Values:
  classicCli    (1) - Classic CLI engine.
  mdCli         (2) - Model-Driven CLI engine.
  systemDerived (3) - Default value. CLI engine derived from system configuration-mode.
TmnxCreateOrigin INTEGER

bgp-l2vpn(2) bgpSignalL2vpn(4) bgpSignalVpws(9) bof(8) dhcpClient(22) dynScript(7) esa(24) evpn(13) evpnIsa(17) fpe(16) greBridged(18) ipsec(23) manual(1) manual-mci(26) multiSegmentPW(5) pdn(20) pfcpCups(25) radius(3) satellites(15) tli(19) vmhost(21) vplsPmsi(6)

The TmnxCreateOrigin indicates the entity that created the entry.
TmnxCustId Unsigned32 (0 | 1..2147483647)
A number used to identify a Customer or Subscriber. This ID must be
unique within the Service Domain. The value 0 is used as the null ID.
TmnxCustIdNoZero Unsigned32 (1..2147483647)
A number used to identify a Customer or Subscriber. This ID must be
unique within the Service Domain.
TmnxDHCP6MsgType INTEGER

dhcp6MsgTypeAdvertise(2) dhcp6MsgTypeConfirm(4) dhcp6MsgTypeDecline(9) dhcp6MsgTypeInfoRequest(11) dhcp6MsgTypeLeasequery(14) dhcp6MsgTypeLeasequeryReply(15) dhcp6MsgTypeRebind(6) dhcp6MsgTypeReconfigure(10) dhcp6MsgTypeRelayForw(12) dhcp6MsgTypeRelayReply(13) dhcp6MsgTypeRelease(8) dhcp6MsgTypeRenew(5) dhcp6MsgTypeReply(7) dhcp6MsgTypeRequest(3) dhcp6MsgTypeSolicit(1)

The DHCP6 messagetype.
TmnxDPathDomainId OCTET STRING (SIZE (6))
The D-Path Domain Id is a 6-octet object. It contains a 4-octet of
Global Admin Value followed by a 2-octet Local Admin Value.
TmnxDataFormat INTEGER

ascii(2) hex(3)

The data type TmnxDataFormat represents how the input data
is specified:
- 'ascii (2)': the data contains seven-bit ASCII characters
- 'hex   (3)': the data contains octets. It must be displayed in
               hexadecimal format because it contains non-printable
               characters.
TmnxDayOfWeek INTEGER

friday(6) monday(2) saturday(7) sunday(1) thursday(5) tuesday(3) unspecified(0) wednesday(4)

The TmnxDayOfWeek is an enumerated integer that describes the day of
the week.
TmnxDayOfWeekList Bits

friday(5) monday(1) saturday(6) sunday(0) thursday(4) tuesday(2) wednesday(3)

The TmnxDayOfWeekList describes days of the week in a bitset format.
TmnxDefInterDestIdSource INTEGER

useString(1) useTopQTag(2) useVpi(3)

The data type TmnxDefInterDestIdSource specifies what will be used as
the default intermediate destination identifier.

This value is used in case no other source (like RADIUS) provides an
intermediate destination identifier.

If the value of this object is set to 'useString', the value of the
string contained in another object will be used as the default
intermediate destination identifier; that object must be identified
where this datatype is used.

If the value of this object is set to 'useTopQTag', the top q-tag of
the ingress SAP will be used as the default subscriber intermediate
destination identifier.

If the value of this object is set to 'useVpi', the ATM VPI of the
ingress SAP will be used as the default subscriber intermediate
destination identifier.
TmnxDefSubIdSource INTEGER

useAutoId(3) useSapId(1) useString(2)

The data type TmnxDefSubIdSource specifies what will be used as the
default subscriber identification.

This value is used in case no other source (like RADIUS) provides a
subscriber identification string.

If the value of this object is set to 'useSapId', the SAP-id will be
used as the default subscriber identification string.

If the value of this object is set to 'useAutoId', the auto-generated
subscriber identification string, as defined in
tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber
identification string.

If the value of this object is set to 'useString', the value of the
string contained in another object will be used as the default
subscriber identification string; that object must be identified where
this datatype is used.
TmnxDestTEPOperFlag Bits

controlWordMismatch(1) hashLblMismatch(5) noL2Comm(2) serviceDown(4) serviceMtuMismatch(0) transportDown(3)

The TmnxDestTEPOperFlag data type is an enumerated bit that  specifies
the conditions affecting the operational status of the  evpn-mpls TEP.
TmnxDestTEPOperState INTEGER

down(2) up(1)

The TmnxDestTEPOperState data type is an enumerated integer  that
specifies the operating state of evpn-mpls destination TEP.
TmnxDhcpClientState INTEGER

bound(6) init(0) init-reboot(1) rebinding(5) rebooting(2) renewing(7) requesting(4) selecting(3)

The state of a DHCP client.
TmnxDhcpOptionDisplay INTEGER

default(1) hexDuration(2) hexIpv4Address(4) hexIpv6Address(5) hexNetbiosNodeType(3)

The data type TmnxDhcpOptionDisplay represents a hint of
how the value of a DHCP option can be displayed:
- 'default (1)'             : display the option according to the type;
- 'hexDuration (2)'         : display the hex option as a duration;
- 'hexNetbiosNodeType (3)'  : display the hex option as a Netbios node type.;
- 'hexIpv4Address (4)'      : display the hex option as a list of IPv4 addresses.;
- 'hexIpv6Address (5)'      : display the hex option as a list of IPv6 addresses.
TmnxDhcpOptionType INTEGER

ascii(2) domain(5) hex(3) ipv4(1) ipv6(4)

The data type TmnxDhcpOptionType represents how the value
of this option is encoded:
- 'ipv4 (1)'  : this option contains an IPv4 address (4 octets)
- 'ascii(2)'  : this option contains seven-bit ASCII characters
- 'hex  (3)'  : this option contains octets. It must be displayed in
                hexadecimal format because it contains non-printable
                characters.
- 'ipv6 (4)'  : this option contains an IPv6 address (16 octets)
- 'domain (5)': this option contains a domain name that will be
                encoded as specified by RFC 1035 section 3.1.
TmnxDhcpServerDUIDTypeCode INTEGER

duidEnterprise(2) duidLinkLocal(3)

The data type TmnxDhcpServerDUIDTypeCode represents the type code of
the DHCP Unique Identifier (DUID) as specified by RFC 3315 section
9.1.
TmnxDiamCcFailureHndlng INTEGER

continue(2) retryAndTerminate(3) terminate(1)

The TmnxDiamCcFailureHndlng data type is an enumerated integer that
describes the different actions that can be taken after a DCCA
(Diameter Credit Control Application) session failure has occurred.
TmnxDisplayStringURL DisplayString (SIZE (0..180))
A string that represents an URL. If the URL contains login information
in the form of 'username:password' this login information will be
blanked out in the SNMP get response, by replacing the login
information with '*:*'.
TmnxDistCpuProtAction INTEGER

discard(1) low-priority(2) none(3)

The TmnxDistCpuProtAction data type is an enumerated integer
that describes the values used to specify the action to be taken on the
traffic when the filter entry matches.
discard      (1)  packets matching the filter entry are discarded
low-priority (2)  packets matching the filter entry are marked as
                  low-priority
none         (3)  no action is taken.
TmnxDistCpuProtActionDuration Integer32 (-1 | 0 | 1..10080)
An exceed action rate in seconds for Distributed CPU Protection Policy
parameters determining hold-down duration for specified exceed-action.
The value of 0 means no hold-down and value of -1 means indefinite
hold-down duration.
TmnxDistCpuProtBurstSize Integer32 (-1 | 0..4194304)
The amount of buffer space (in kilobytes) assigned to a queue by
policer for Distributed CPU Protection Policy parameters.
TmnxDistCpuProtDuneProtocolId INTEGER

all-unspecified(9) arp(1) bfd(25) bgp(12) dhcp(2) ftp(26) icmp-v4(27) icmp-v6(28) igmp(5) isis(14) l3-to-my-ipv4(29) l3-to-my-ipv6(30) ldp(15) lsp-ping(31) mc-lag(32) mcast-snooping(33) mld(6) ospf(16) pim(17) radius(34) rip(35) rsvp(18) sbfd-reflector(36) snmp(37) ssh(38) stp(39) tacacs(40) telnet(41) tftp(42) twamp(43) vrrp(22)

The TmnxDistCpuProtDuneProtocolId data type is an enumerated integer
that indicates the protocols supported for the Distributed CPU
Protection Policy in IXR systems.
TmnxDistCpuProtEnforceType INTEGER

dynamic(2) shared(3) static(1)

The TmnxDistCpuProtEnforceType data type is an enumerated integer that
describes the values used to specify the enforcement type.
TmnxDistCpuProtLogEventType INTEGER

enable(1) none(0) verbose(2)

The TmnxDistCpuProtLogEventType data type is an enumerated integer
that describes the state of log events for Distributed CPU Protection
Policy.
none         (0)  indicates log events is disabled
enable       (1)  indicates log events is enabled
verbose      (2)  indicates generation of additional log events to be
                  used for debug/tuning/investigations which would have
                  not been generated when TmnxDistCpuProtLogEventType
                  is set to 'enable'.
TmnxDistCpuProtPacketPolicerRateLimit Integer32 (-1 | 0..8000)
A packet rate limit expressed in packets per second for Distributed
CPU Protection Policy parameters. The value -1 means max rate.
TmnxDistCpuProtPacketRateLimit Integer32 (-1 | 0..255)
A packet rate limit expressed in packets per second for Distributed
CPU Protection Policy parameters. The value -1 means max rate.
TmnxDistCpuProtProtocolId INTEGER

all-unspecified(9) arp(1) bfd-cpm(11) bgp(12) dhcp(2) eth-cfm(13) http-redirect(3) icmp(4) icmp-ping-check(19) igmp(5) isis(14) lacp(21) ldp(15) mld(6) mpls-ttl(10) multi-chassis(23) multi-chassis-sync(24) ndis(7) needsIcmp(27) ospf(16) pim(17) pppoe-pppoa(8) radius(26) rsvp(18) ssh(25) vrrp(22)

The TmnxDistCpuProtProtocolId data type is an enumerated integer that
indicates the protocols supported for the Distributed CPU Protection
Policy.
TmnxDistCpuProtRate Integer32 (-1 | 1..20000000)
A kbps limiting rate in kilobits per second for Distributed CPU
Protection Policy parameters. The value -1 means max rate.
TmnxDistCpuProtRateType INTEGER

kbps(2) packets(1)

The TmnxDistCpuProtRateType data type is an enumerated integer that
describes the rate type being applied by the policer for the
Distributed CPU Protection Policy.
TmnxDistCpuProtState INTEGER

conform(2) exceed(1) not-applicable(3)

The TmnxDistCpuProtState data type is an enumerated integer that
describes the state of the policer for the Distributed CPU Protection
Policy.
TmnxEgrPolicerStatMode INTEGER

minimal(1) noStats(0) offeredFourProfileNoCir(9) offeredLimitedCappedCIR(5) offeredProfileCIR(4) offeredProfileCappedCIR(6) offeredProfileNoCIR(2) offeredTotalCIR(3) offeredTotalCirExceed(8) offeredTotalCirFourProfile(10)

TmnxEgrPolicerStatMode specifies the mode of statistics collected by
this egress policer.
TmnxEgrPolicerStatModeOverride INTEGER

minimal(1) noOverride(-1) noStats(0) offeredFourProfileNoCir(9) offeredLimitedCappedCIR(5) offeredProfileCIR(4) offeredProfileCappedCIR(6) offeredProfileNoCIR(2) offeredTotalCIR(3) offeredTotalCirExceed(8) offeredTotalCirFourProfile(10)

TmnxEgrPolicerStatModeOverride specifies the override mode of
statistics collected by this egress policer.
TmnxEnabledDisabled INTEGER

disabled(2) enabled(1)

The TmnxEnabledDisabled data type is an enumerated integer that
describes the values used to identify whether an entity is 'enabled'
or 'disabled'.
TmnxEnabledDisabledAdminState INTEGER

disabled(2) enabled(1)

The TmnxEnabledDisabledAdminState data type is an enumerated integer
that describes the values used to identify whether an entity is
'enabled' or 'disabled'. It is to be used for admin state leafs.
TmnxEnabledDisabledOrInherit INTEGER

disabled(2) enabled(1) inherit(3)

The TmnxEnabledDisabledOrInherit data type is an enumerated integer
that describes the values used to identify whether an entity is
'enabled', 'disabled' or inherits its state from another object that
is usually in another MIB table.
TmnxEnabledDisabledOrNA INTEGER

disabled(2) enabled(1) notApplicable(3)

An object of type TmnxEnabledDisabledOrNA indicates if an entity is
enabled or disabled, or if enabled/disabled is not applicable to the
entity.
TmnxEncapVal Unsigned32
The value of the label used to identify the entity using the specified
encapsulation value on a specific port.

The format of this object depends on the encapsulation type defined on
this port.

When the encapsulation is nullEncap the value of this object must be
zero.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 00000000 00000000|
+--------+--------+--------+--------+

When the encapsulation is dot1qEncap the value of this object is equal
to the 12-bit IEEE 802.1Q VLAN ID.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

Bit 31 is set to 0 in the case of tagged-VLAN.
Bit 31 is set to 1 in the case of dotq-CP as follows:
31                                   0
+--------+--------+--------+--------+
|10000000 00000000 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

When the encapsulation is mplsEncap the value of this object is equal
to the 20-bit LSP ID.

31                                   0
+--------+--------+--------+--------+
|00000000 0000XXXX XXXXXXXX XXXXXXXX|
+--------+--------+--------+--------+

When the encapsulation is qinqEncap, the value of the outer 802.1Q
VLAN ID is encoded in the least significant 16 bits, and the value of
the inner VLAN ID is encoded in the most significant 16 bits.

31   inner             outer       0
+--------+--------+--------+--------+
|0000YYYY YYYYYYYY 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

where:
    - '*' is represented as 4095.
    - '0' is represented as 0.
    - any other value in between as a valid tag.
    - '*.null' is represented in the following way:

      31                                  0
      +--------+--------+--------+--------+
      |10000000 00000000 00001111 11111111|
      +--------+--------+--------+--------+

    - 'null.null' is represented in the following way:

      31                                  0
      +--------+--------+--------+--------+
      |10000000 00000000 00010000 00000000|
      +--------+--------+--------+--------+

Bit 30 is set to 0 in the case of tagged-qinq for the inner tag. Bit
30 is set to 1 in the case of qinq-CP with inner tag. Bit 15 is set to
0 in the case of tagged-qinq for the outer tag. Bit 15 is set to 1 in
the case of qinq-CP with outer tag.

Example of qinq encoding for CP.* saps:

31                                   0
+--------+--------+--------+--------+
|00001111 11111111 100XXXXX XXXXXXXX|
+--------+--------+--------+--------+


Example of qinq encoding for qtag.CP saps:

31                                   0
+--------+--------+--------+--------+
|010XXXXX XXXXXXXX 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

Some ports have a restrictions to the encapsulation types that they
can support and hence impose restrictions on the respective formats
defined above.
TmnxEncrAlgorithm INTEGER

aes128(4) aes128Gcm12(8) aes128Gcm16(9) aes128Gcm8(7) aes192(5) aes192Gcm12(11) aes192Gcm16(12) aes192Gcm8(10) aes256(6) aes256Gcm12(14) aes256Gcm16(15) aes256Gcm8(13) des(2) des3(3) null(1) nullAes128Gmac(16) nullAes192Gmac(17) nullAes256Gmac(18)

TmnxEncrAlgorithm data type is an enumerated integer that describes
the values used to identify the encryption algorithm.

Value Descriptions:

null          - Choosing this value configures the high-speed
                null algorithm, which does nothing. This is same
                as not having encryption turned on.

des           - Choosing this value configures the 56-bit DES
                algorithm for encryption. This is an older
                algorithm with relatively weak security. While
                better than nothing, it should only be used
                where a strong algorithm is not available on
                both ends at an acceptable performance level.

des3          - Choosing this value configures the 3-DES
                algorithm for encryption. This is a modified
                application of the des algorithm which uses
                multiple des operations to make things more
                secure.

aes128        - Choosing this value configures the AES algorithm
                with a block size of 128 bits. This is a
                mandatory implementation size for AES. As of
                today, this is a very strong algorithm choice.

aes192        - Choosing this value configures the AES algorithm
                with a block size of 192 bits. This is a
                stronger version of AES.

aes256        - Choosing this value configures the AES algorithm
                with a block size of 256 bits. This is the
                strongest available version of AES.

aes128Gcm8     - Choosing this value configures the AES algorithm
                with a block size of 128 bits in Galois/Counter
                Mode (GCM) with an 8 octet Integrity Check Value (ICV).

aes128Gcm12    - Choosing this value configures the AES algorithm
                with a block size of 128 bits in Galois/Counter
                Mode (GCM) with an 12 octet ICV.

aes128Gcm16    - Choosing this value configures the AES algorithm
                with a block size of 128 bits in Galois/Counter
                Mode (GCM) with an 16 octet ICV.

aes192Gcm8     - Choosing this value configures the AES algorithm
                with a block size of 192 bits in Galois/Counter
                Mode (GCM) with an 8 octet ICV.

aes192Gcm12    - Choosing this value configures the AES algorithm
                with a block size of 192 bits in Galois/Counter
                Mode (GCM) with an 12 octet ICV.

aes192Gcm16    - Choosing this value configures the AES algorithm
                with a block size of 192 bits in Galois/Counter
                Mode (GCM) with an 16 octet ICV.

aes256Gcm8     - Choosing this value configures the AES algorithm
                with a block size of 256 bits in Galois/Counter
                Mode (GCM) with an 8 octet ICV.

aes256Gcm12    - Choosing this value configures the AES algorithm
                with a block size of 256 bits in Galois/Counter
                Mode (GCM) with an 12 octet ICV.

aes256Gcm16    - Choosing this value configures the AES algorithm
                with a block size of 256 bits in Galois/Counter
                Mode (GCM) with an 16 octet ICV.

nullAes128Gmac - Choosing this value configures the AES algorithm
                with a block size of 128 bits in Galois Message
                Authentication Code (GMAC).

nullAes192Gmac - Choosing this value configures the AES algorithm
                with a block size of 192 bits in Galois Message
                Authentication Code (GMAC).

nullAes256Gmac - Choosing this value configures the AES algorithm
                with a block size of 256 bits in Galois Message
                Authentication Code (GMAC).
TmnxEsaNum Unsigned32 (0 | 1..16)
The TmnxEsaNum data type contains an identification number for an
Extended Service Appliance. The value '0' indicates an invalid
reference.
TmnxEsaVappNum Unsigned32 (0 | 1..4)
The TmnxEsaVappNum type contains an identification number for the
Virtual Application on an Extended Service Appliance. The value '0'
indicates an invalid reference.
TmnxEvpnMHEthSegStatus INTEGER

df(1) ndf(2) notesmanaged(3)

The TmnxEvpnMHEthSegStatus data type is an enumerated integer that
describes the status of an ethernet segment associated with the given
SAP or SDP binding.
TmnxEvpnMultiHomingState INTEGER

allActive(3) allActiveNoEsiLabel(4) disabled(0) singleActive(1) singleActiveNoEsiLabel(2)

The value of TmnxEvpnMultiHomingState indicates multi-homing state of
the element.
TmnxExtServId Unsigned32 (0 | 1..2147483647)
A number used to identify an external Service. This ID must be unique
within the Service Domain. The value 0 is used as the null ID.
TmnxFPNumber Unsigned32 (1..12)
The unique value that identifies the forwarding plane within a
specific IOM card in the system.
TmnxFPNumberOrZero Unsigned32 (0 | 1..12)
The unique value that identifies the forwarding plane within a
specific IOM card in the system.

Value 0 means this value is not applicable.
TmnxFilterProfileStringOrEmpty DisplayString (SIZE (0..16))
The data type TmnxFilterProfileStringOrEmpty denotes the filter
profile string. The empty string denotes the absence of a filter
profile.
TmnxFlexAlgoId Unsigned32 (128..255)
TmnxFlexAlgoId identifies a specific Flexible Algorithm in the system.
TmnxFlexAlgoIdOrZero Unsigned32 (0 | 128..255)
TmnxFlexAlgoId identifies a specific Flexible Algorithm in the system.

The value '0' indicates that no Flexible Algorithm is specified.
TmnxFpeId Unsigned32 (1..64)
The data type TmnxFpeId is a number that uniquely identifies a Forward
Path Extension (FPE).
TmnxFpeIdOrZero Unsigned32 (0..64)
The data type TmnxFpeIdOrZero is a number that either uniquely
identifies a Forward Path Extension (FPE), or is equal to zero.
TmnxFpePathId Unsigned32 (1..64)
The data type TmnxFpePathId is a number that uniquely identifies a
path within a multi-path Forward Path Extension (FPE).
TmnxHigh32 Unsigned32
The upper 32 bits of a 64 bit value.
TmnxHttpRedirectUrl DisplayString
A string that represents an HTTP URL configured for HTTP redirection.

The string may contain a macro '$URL' that specifies substitution of
'$URL' by another string; the origin of that string is documented
where this textual convention is used.

The string may contain a macro '$MAC' that specifies substitution of
'$MAC' by another string, representing a MAC address; the origin of
that string is documented where this textual convention is used.

The string may contain a macro '$IP' that specifies substitution of
'$IP' by another string, representing an IP address; the origin of
that string is documented where this textual convention is used.

The string may contain a macro '$SUB' that specifies substitution of
'$SUB' by another string, representing an subscriber ID; the origin of
that string is documented where this textual convention is used.

The string may contain a macro '$SAP' that specifies substitution of
'$SAP' by another string, representing a SAP (Service Access Point);
the origin of that string is documented where this textual convention
is used.

The string may contain a macro '$SAPDESC' that specifies substitution
of '$SAPDESC' by another string; the origin of that string is
documented where this textual convention is used.

The string may contain a macro '$CID' that specifies substitution of
'$CID' by a bytestring, representing a circuit-id or interface-id; the
origin of that string is documented where this textual convention is
used.

The string may contain a macro '$RID' that specifies substitution of
'$RID' by a bytestring, representing a remote-id; the origin of that
string is documented where this textual convention is used.

Not all substitution macro's are supported in every situation; an
unsupported macro is ignored (substituted with nothing); the set of
supported macro's should be documented where this textual convention
is used.
TmnxIPsecDirection INTEGER

inbound(1) outbound(2)

TmnxIPsecDirection data type is an enumerated integer that describes
the values used to identify the direction of an IPsec tunnel.
TmnxIPsecKeyingType INTEGER

dynamic(2) manual(1) none(0)

TmnxIPsecKeyingType data type is an enumerated integer that describes
the values used to identify the IPsec keying type.
TmnxIPsecTunnelTemplateId Unsigned32 (1..2048)
A number used to identify an entry in the tIPsecTnlTempTable.
TmnxIPsecTunnelTemplateIdOrZero Unsigned32 (0..2048)
A number used to identify an entry in the tIPsecTnlTempTable or zero.
TmnxISID Integer32 (0 | 1..16777215)
The TmnxISID specifies a 24 bit (1..16777215) service instance
identifier for the service. As part of the Shortest Path Bridging
(SPB) frames, it is used at the destination PE as a demultiplexor
field.

The value of 0 is used to indicate the value of this object is
unspecified.
TmnxISIDNoZero Integer32 (1..16777215)
The TmnxISID specifies a 24 bit (1..16777215) service instance
identifier for the service. As part of the Shortest Path Bridging
(SPB) frames, it is used at the destination PE as a demultiplexor
field.
TmnxIgmpGroupFilterMode INTEGER

exclude(2) include(1)

The data type TmnxIgmpGroupFilterMode describes the filter-mode of a
group.

In 'include(1)' mode, reception of packets sent to the specified
multicast address is requested only from those IPv4 Source addresses
listed in the corresponding source-list.

In 'exclude(2)' mode, reception of packets sent to the given multicast
address is requested from all IPv4 Source addresses, except those
listed in the corresponding source-list (if any).
TmnxIgmpGroupType INTEGER

bgp-smet(3) bgp-sync(4) dynamic(2) static(1)

The data type TmnxIgmpGroupType describes how a multicast group is
learned.
TmnxIgmpSnpgGroupType INTEGER

bgp-smet(3) bgp-sync(4) dynamic(2) static(1)

The data type TmnxIgmpSnpgGroupType describes how a multicast group is
learned.
TmnxIgmpVersion INTEGER

version1(1) version2(2) version3(3)

The data type TmnxIgmpVersion denotes the version of the IGMP protocol:
- 'version1(1)': means version 1 of the IGMP protocol
- 'version2(2)': means version 2 of the IGMP protocol
- 'version3(3)': means version 3 of the IGMP protocol.
TmnxIgpInstance Unsigned32 (0..127)
An object of type TmnxIgpInstance identifies an instance of an
Interior Gateway Protocol (IGP).

Supported IGPs are Intermediate System to Intermediate System (IS-IS)
and Open Shortest Path First (OSPF).

The supported range varies with the IGP and address family, as
follows.

IGP      Address Family   Supported Range
------   --------------   ---------------
IS-IS    all                        0..127
OSPFv2   all                        0..31
OSPFv3   IPv4 unicast              64..95
OSPFv3   IPv6 unicast               0..31
TmnxIgpSCFamilyType INTEGER

ipv4(0) ipv6(1) srv4(2) srv6(3)

The data type to specify IGP shortcut tunnel next hop family.
TmnxIkePolicyAuthMethod INTEGER

autoEap(10) autoEapRadius(9) cert(5) certRadius(7) eap(8) hybridX509XAuth(2) plainPskXAuth(4) plainX509XAuth(3) psk(1) pskRadius(6)

TmnxIkePolicyAuthMethod data type is an enumerated integer that
describes the type of authentication method used.
TmnxIkePolicyAutoEapMethod INTEGER

cert(2) psk(1) pskOrCert(3)

TmnxIkePolicyAutoEapMethod data type is an enumerated integer that
describes the type of fallback authentication method use in
conjunction with the automatic EAP authentication method.
TmnxIkePolicyAutoEapOwnMethod INTEGER

cert(2) psk(1)

TmnxIkePolicyAutoEapOwnMethod data type is an enumerated integer that
describes the type of fallback authentication method use in
conjunction with the automatic EAP authentication method on its own
side.
TmnxIkePolicyDHGroupOrZero INTEGER

group1(1) group14(14) group15(15) group19(19) group2(2) group20(20) group21(21) group5(5) unspecified(0)

TmnxIkePolicyDHGroupOrZero data type is similar to
TmnxIkePolicyDHGroup but allows the value 'unspecified (0)'.
TmnxIkePolicyOwnAuthMethod INTEGER

cert(5) eapOnly(8) psk(1) symmetric(0)

TmnxIkePolicyOwnAuthMethod data type is an enumerated integer that
describes the type of authentication method used for its own side.
TmnxIngPolicerStatMode INTEGER

minimal(1) noStats(0) offeredLimitedCappedCIR(9) offeredLimitedProfileCIR(7) offeredPriorityCIR(6) offeredPriorityNoCIR(4) offeredProfileCIR(5) offeredProfileCappedCIR(8) offeredProfileNoCIR(2) offeredTotalCIR(3)

TmnxIngPolicerStatMode specifies the mode of statistics collected by
this ingress policer.
TmnxIngPolicerStatModeOverride INTEGER

minimal(1) noOverride(-1) noStats(0) offeredLimitedCappedCIR(9) offeredLimitedProfileCIR(7) offeredPriorityCIR(6) offeredPriorityNoCIR(4) offeredProfileCIR(5) offeredProfileCappedCIR(8) offeredProfileNoCIR(2) offeredTotalCIR(3)

TmnxIngPolicerStatModeOverride specifies the override mode of
statistics collected by this ingress policer.
TmnxInternalSchedWeightMode INTEGER

cappedOfferedLoad(5) default(2) forceEqual(3) noOverride(1) offeredLoad(4)

The value of TmnxInternalSchedWeightMode specifies the weight-mode
applied to queues using internal-scheduler. Various modes can be
enumerated as follows:

   noOverride (1)        - follows queue behavior specified at the card
                           level.
   default (2)           - queues are equally weighted except for
                           mixed-speed LAG (when the value of
                           TIMETRA-LAG-MIB.mib::tLagPerFpIngQueuing is
                           set to 'false (2)') where queues are weighted
                           based on port-speed.
   forceEqual (3)        - all queues are always equally weighted.
   offeredLoad (4)       - queues are weighted based on offered load.
   cappedOfferedLoad (5) - queues are weighted based on offered load
                           capped by admin PIR.
TmnxIpSecIsaOperFlags Bits

adminDown(0) mcAdminDown(3) noActive(1) noResources(2)

The value of TmnxIpSecIsaOperFlags specifies the operational flags
that determine the status of the MDAs associated with IPsec ISA.
TmnxIpv4AddressAndMaskOrPrefixAddress IpAddress
TmnxIpv4AddressAndMaskOrPrefixMask IpAddress
TmnxIpv4AddressAndMaskOrPrefixPrefix IpAddressPrefixLength
TmnxIpv4AddressAndPrefixAddress IpAddress
TmnxIpv4AddressAndPrefixPrefix IpAddressPrefixLength
TmnxIpv6AddressAndMaskOrPrefixAddress InetAddressIPv6
TmnxIpv6AddressAndMaskOrPrefixMask InetAddressIPv6
TmnxIpv6AddressAndMaskOrPrefixPrefix InetAddressPrefixLength
TmnxIpv6AddressAndPrefixAddress InetAddressIPv6
TmnxIpv6AddressAndPrefixPrefix InetAddressPrefixLength
TmnxIsaBbGrpId Unsigned32 (0..4)
The TmnxIsaBbGrpId data type contains an identification number for an
ISA-BB group.

An ISA-BB group is a set of MDA of type 'isa-bb' that together
performs a particular function such as NAT (Network Address
Translation) or IP datagram fragment reassembly.

The value zero means that no ISA-BB Group is defined.
TmnxIsaScalingProfile INTEGER

profile1(1) profile2(2) profile3(3)

TmnxIsaScalingProfile is an enumerated integer that specifies the ISA
scaling profile.

The meaning of each profile is explained in the customer
documentation.

ISA scaling profiles are only used in a virtual machine
implementation.
TmnxIsidMFibStatus Bits

addPending(1) delPending(2) ok(0) sysMFibLimit(3) useDefMCTree(4)

The TmnxIsidMFibStatus data type describes the MFIB status of the
ISID.
TmnxL2tpTunnelGroupName DisplayString (SIZE (1..63))
The TmnxL2tpTunnelGroupName data type contains a valid string to
identify a Layer Two Tunneling Protocol Tunnel Group.
TmnxL2tpTunnelGroupNameOrEmpty DisplayString (SIZE (0..63))
The TmnxL2tpTunnelGroupNameOrEmpty data type contains a valid string
to identify a Layer Two Tunneling Protocol Tunnel Group.

An empty string indicates that no Tunnel Group is defined.
TmnxLagPerLinkHashClass Integer32 (1..3)
The TmnxLagPerLinkHashClass is the class of traffic which along with
the relative weight is used in the egress hashing on the LAG.
TmnxLagPerLinkHashClassOrNone Integer32 (0..3)
The TmnxLagPerLinkHashClass is the class of traffic which along with
the relative weight is used in the egress hashing on the LAG.
TmnxLagPerLinkHashWeight Integer32 (1..1024)
The TmnxLagPerLinkHashWeight is the relative weight of the traffic
which along with the class is used in the egress hashing on the LAG.
TmnxLdpFECType INTEGER

addrHost(3) addrPrefix(2) addrWildcard(1) vll(128) vpls(130) vpws(129)

TmnxLdpFECType determines the kind of FEC that the label mapping,
withdraw, release and request messages are referring to.
TmnxLinkMapProfileId Integer32 (1..64)
The data type TmnxLinkMapProfileId describes the link map profile
identifier.
TmnxLinkMapProfileIdOrZero Integer32 (0 | 1..64)
The data type TmnxLinkMapProfileId describes the link map profile
identifier or zero.
TmnxLldpManAddressIndex INTEGER

oob(0) oobIpv6(3) system(1) systemIpv6(2)

An Index value, used as the index to the table of local port
management addresses, tmnxLldpConfigManAddrPortsTable. The index
represents a specific local management address application on the
system which may, or may not exist.
TmnxLongDisplayString OCTET STRING (SIZE (0..1024))
The TmnxLongDisplayString indicates a long DisplayString.
TmnxLongDisplayStringLegacyBinary OCTET STRING (SIZE (0..900))
The TmnxLongDisplayString indicates a long DisplayString.
TmnxLongDisplayStringToBinary TmnxLongDisplayString
The TmnxLongDisplayString indicates a long DisplayString.
TmnxLow32 Unsigned32
The lower 32 bits of a 64 bit value.
TmnxMacMask OCTET STRING (SIZE (6))
The TmnxMacMask is the 6 byte mask to provide the range of MAC
addresses.
TmnxMacSpecification DisplayString (SIZE (0..17))
The data type TmnxMacSpecification is a string of ASCII characters
that specifies how to format a string that represents a MAC address.

The format is as follows:

<mac-specification> ::= <alpha-string> [<delimiter-char>]

<alpha-string>      ::= <ucase-alpha>+ | <lcase-alpha>+
<ucase-alpha>       ::= 'A' | 'B' | 'B' ... | 'Z'
<lcase-alpha>       ::= 'a' | 'b' | 'c' ... | 'z'

<delimiter-char>    any ASCII character that is not an <alpha-char>
                   or a decimal digit

Only the number of alphabetic characters and the case is relevant.
Examples:

'ab:'               00:0c:f1:99:85:b8  Nokia SROS style
'XY-'               00-0C-F1-99-85-B8  IEEE canonical style
'mmmm.'             0002.03aa.abff     Cisco style.
'xx'                000cf19985b8
TmnxManagedRouteStatus INTEGER

deprecated1(9) enhancedSubMgmtRequired(8) gtpNotSupported(14) hostInactive(7) installed(0) l2AwNotSupported(10) nextHopLimitExceeded(11) noNextHop(13) notApplicable(12) notYetInstalled(1) outOfMemory(3) parentInterfaceDown(6) routeTableFull(5) shadowed(4) withdrawn(15) wrongAntiSpoofType(2)

The data type TmnxManagedRouteStatus denotes the status of a Managed
Route.
TmnxMcIPsecDomainAdjRmtDesignatedRole INTEGER

active(2) standby(1) unknown(3)

TmnxMcIPsecDomainAdjRmtDesignatedRole indicated the designated role of
remote MC IPsec Domain.
TmnxMcIPsecDomainDesignatedRole INTEGER

active(2) standby(1)

TmnxMcIPsecDomainDesignatedRole indicates the designated role of a
Multi-chassis IPsec Domain.
TmnxMcIPsecDomainId Unsigned32 (1..255)
TmnxMcIPsecDomainId is an integer identifying a Multi-chassis IPsec
Domain.
TmnxMcPathVdoStSeBufferTime INTEGER

buf1000ms(10) buf100ms(1) buf1100ms(11) buf1200ms(12) buf1300ms(13) buf1400ms(14) buf1500ms(15) buf1600ms(16) buf1700ms(17) buf1800ms(18) buf1900ms(19) buf2000ms(20) buf200ms(2) buf2100ms(21) buf2200ms(22) buf2300ms(23) buf2400ms(24) buf2500ms(25) buf2600ms(26) buf2700ms(27) buf2800ms(28) buf2900ms(29) buf3000ms(30) buf300ms(3) buf400ms(4) buf500ms(5) buf600ms(6) buf700ms(7) buf800ms(8) buf900ms(9)

The TmnxMcPathVdoStSeBufferTime data type describes the buffer time
for the stream-selection.
TmnxMcPathVdoStSeBufferTimeOrZero INTEGER

buf1000ms(10) buf100ms(1) buf1100ms(11) buf1200ms(12) buf1300ms(13) buf1400ms(14) buf1500ms(15) buf1600ms(16) buf1700ms(17) buf1800ms(18) buf1900ms(19) buf2000ms(20) buf200ms(2) buf2100ms(21) buf2200ms(22) buf2300ms(23) buf2400ms(24) buf2500ms(25) buf2600ms(26) buf2700ms(27) buf2800ms(28) buf2900ms(29) buf3000ms(30) buf300ms(3) buf400ms(4) buf500ms(5) buf600ms(6) buf700ms(7) buf800ms(8) buf900ms(9) none(0)

The TmnxMcPathVdoStSeBufferTimeOrZero data type describes the buffer
time for the stream-selection.
TmnxMdaQos INTEGER

fpHwAggShaper(5) hs(4) hsmda1(2) hsmda2(3) mda(1) unknown(0)

TmnxMdaQos is an enumerated integer whose value specifies the Quality
of Service support of a Media Dependent Adapter (MDA).
TmnxMldGroupFilterMode INTEGER

exclude(2) include(1)

The data type TmnxMldGroupFilterMode describes the filter-mode of a
group.

In 'include(1)' mode, reception of packets sent to the specified
multicast address is requested only from those IPv6 source addresses
listed in the corresponding source-list.

In 'exclude(2)' mode, reception of packets sent to the given multicast
address is requested from all IPv6 source addresses, except those
listed in the corresponding source-list (if any).
TmnxMldGroupType INTEGER

bgp-smet(3) bgp-sync(4) dynamic(2) static(1)

The data type TmnxMldGroupType describes how a multicast group is
learned.
TmnxMldVersion INTEGER

version1(1) version2(2)

The data type TmnxMldVersion denotes the version of the MLD protocol:
- 'version1(1)': means version 1 of the MLD protocol
- 'version2(2)': means version 2 of the MLD protocol
TmnxMlpppEpClass INTEGER

directoryNumber(5) ipv4Address(2) local(1) macAddress(3) magicNumber(4) null(0)

The TmnxMlpppEpClass type represents the address class of the MLPPP
Endpoint Discriminator option.
TmnxMplsLabel Unsigned32 (32..1048575)
The TmnxMplsLabel data type indicates range for MPLS label.
TmnxMplsLabelOrZero Unsigned32 (0 | 32..1048575)
The TmnxMplsLabelOrZero data type indicates range for MPLS label. The
value 0 indicates that no MPLS label is specified.
TmnxMplsLdpNgIdType INTEGER

ipv4(1) ipv6(2)

A value that represents the type of LDP identifier

ipv4(1)     An IPv4 identifier type as defined by the
            InetAddressIPv4 textual convention.

ipv6(2)     An IPv6 identifier type as defined by the
            InetAddressIPv6 textual convention.

Each definition of a concrete TmnxMplsLdpNgIdType value must be
accompanied by a definition of a textual convention for use with that
TmnxMplsLdpNgIdType.

Implementations must ensure that TmnxMplsLdpNgIdType objects
and any dependent objects (e.g., TmnxMplsLdpNgIdentifier objects) are
consistent.  An inconsistentValue error must be generated
if an attempt to change an TmnxMplsLdpNgIdType object would,
for example, lead to an undefined TmnxMplsLdpNgIdentifier value. In
particular, TmnxMplsLdpNgIdType/TmnxMplsLdpNgIdentifier pairs must be
changed together if the identifier type changes (e.g., from
ipv6(2) to ipv4(1)).
TmnxMplsLdpNgIdentifier OCTET STRING (SIZE (0..18))
The LDP identifier is a eighteen octet quantity which is used to
identify a Label Switch Router (LSR) label space.

When the LDP Id type is 'ipv4', the first four octets encode an IP
address assigned to the LSR, and next two octets identify a specific
label space within the LSR assigned to the LSR.

When the LDP Id type is 'ipv6', the first sixteen octets encode an IP
address an assigned to the LSR, and last two octets identify a
specific label space within the LSR.
TmnxMplsLspBandwidth Unsigned32 (0..6400000)
The TmnxMplsLspBandwidth data type indicates maximum bandwidth range.
TmnxMplsLspBandwidthOrNone Integer32 (-1 | 0..6400000)
The TmnxMplsLspBandwidthOrNone data type indicates maximum bandwidth
range. A value of -1 indicates bandwidth range is not configured.
TmnxMplsLsrNgIdentifier OCTET STRING (SIZE (16))
The Label Switch Router (LSR) identifier is the first 16 bytes or the
Router Id component of the IPv6 Label Distribution Protocol (LDP)
identifier.
TmnxMplsTpGlobalID Unsigned32
The value of TmnxMplsTpGlobalID specifies the MPLS-TP global
identifier.
TmnxMplsTpNodeID Unsigned32
The value of TmnxMplsTpNodeID specifies the MPLS-TP node identifier.
TmnxMplsTpTunnelType INTEGER

mplsTpStatic(1)

The type of this MPLS-TP tunnel entity.
TmnxMsPwPeSignaling INTEGER

auto(1) master(2)

A number used to identify a multi-segment pseudo-wire provider-edge
signaling type.
TmnxMulticastAddrFamily INTEGER

ipv4Multicast(0) ipv6Multicast(1)

The data type TmnxMulticastAddrFamily denotes the family for multicast
protocol.
TmnxNatIsaGrpId Unsigned32 (1..4)
The TmnxNatIsaGrpId data type contains an identification number for a
Network Address Translation Integrated Service Adaptor group.
TmnxNatIsaGrpIdOrZero Unsigned32 (0..4)
The TmnxNatIsaGrpIdOrZero data type contains an identification number
for a Network Address Translation Integrated Service Adaptor (ISA)
group.

The value zero means that no NAT ISA Group is defined.
TmnxNatL2AwAccessMode INTEGER

auto(1) bridged(2)

TmnxNatL2AwAccessMode is an enumerated integer that specifies the
Layer-2-Aware NAT access mode.

The value 'auto' means that the system automatically derives the
access mode from the configuration (of the access SAP).
TmnxNatLegacySubscriberType INTEGER

classicLsnSub(2) dsliteLsnSub(3) l2AwareSub(1) nat64LsnSub(4)

TmnxNatLegacySubscriberType is an enumerated integer that specifies
the NAT subscriber type.

The possible values are 'classicLsnSub' and 'dsliteLsnSub' for classic
and Dual Stack Lite Large Scale NAT subscribers respectively,
'l2AwareSub' for Layer-2-Aware NAT subscribers, and 'nat64LsnSub' for
NAT-64 subscribers respectively.
TmnxNatLegacySubscriberTypeOrNone INTEGER

classicLsnSub(2) dsliteLsnSub(3) l2AwareSub(1) nat64LsnSub(4) none(0)

TmnxNatLegacySubscriberTypeOrNone is an enumerated integer that
specifies the NAT subscriber type.

The value 'none' indicates that NAT subscriber type is not specified.

The values 'classicLsnSub' and 'dsliteLsnSub' are for classic and Dual
Stack Lite Large Scale NAT subscribers respectively. The value
'l2AwareSub' is for Layer-2-Aware NAT subscribers, and the value
'nat64LsnSub' is for NAT-64 subscribers.
TmnxNatSubscriberType INTEGER

classicLsnSub(2) dsliteLsnSub(3) l2AwareSub(1) nat64LsnSub(4) nat66LsnSub(5)

TmnxNatSubscriberType is an enumerated integer that specifies the NAT
subscriber type.

The possible values are 'classicLsnSub' and 'dsliteLsnSub' for classic
and Dual Stack Lite Large Scale NAT subscribers respectively,
'l2AwareSub' for Layer-2-Aware NAT subscribers, 'nat64LsnSub' for
NAT-64 subscribers and 'nat66LsnSub' for NAT-66 subscribers.
TmnxNatSubscriberTypeOrNone INTEGER

classicLsnSub(2) dsliteLsnSub(3) l2AwareSub(1) nat64LsnSub(4) none(0)

TmnxNatSubscriberTypeOrNone is an enumerated integer that specifies
the NAT subscriber type.

The value 'none' indicates that NAT subscriber type is not specified.

The values 'classicLsnSub' and 'dsliteLsnSub' are for classic and Dual
Stack Lite Large Scale NAT subscribers respectively,  'l2AwareSub' for
Layer-2-Aware NAT subscribers, 'nat64LsnSub' for  NAT-64 subscribers
and 'nat66LsnSub' for NAT-66 subscribers.
TmnxNatWaterMark Unsigned32 (0..100)
The TmnxNatWaterMark data type contains an unsigned number that marks
a usage level in percent.

The value zero means that no watermark is defined.
TmnxNetIngPlcyPolicerStatMode INTEGER

noStats(0) offeredProfileWithDiscards(10)

TmnxIngPolicerStatMode specifies the mode of statistics collected by
this network ingress policer.
TmnxNhgDownReason INTEGER

nextHopIsLocal(3) nextHopIsMcast(4) nextHopNotResolved(1) notApplicable(0) resTypeMismatch(5)

The reason for next-hop group being operationally down.
TmnxObjectID Unsigned32
The value of TmnxObjectID is a unique 32 bit number with special
encoding.

Refer to TIMETRA-PORT-MIB::tmnxObjectId for a description of the
various objectId mappings based on the value of tmnxObjectType.
TmnxOperGrpHoldDownTime Unsigned32 (0..3600)
TmnxOperGrpHoldDownTime indicates time-interval in seconds for the
service operational-group hold down time.
TmnxOperGrpHoldUpTime Unsigned32 (0..3600)
TmnxOperGrpHoldUpTime indicates time-interval in seconds for the
service operational-group hold uptime.
TmnxOperState INTEGER

inService(2) outOfService(3) transition(4) unknown(1)

The TmnxOperState data type is an enumerated integer that describes
the values used to identify the current operational state of
functional modules.
TmnxOspfInstance Unsigned32 (0..127)
A number used to identify an instance of OSPF,

For OSPFv2 only 0..31 is supported,

For OSPFv3 the range is divided in address families as follows:

  0..31   ipv6-unicast address family (supported)
  32..63  ipv6-multicast address family (not supported)
  64..95  ipv4-unicast address family (supported)
  96..127 ipv4-multicast address family (not supported)
TmnxPacketMode INTEGER

dataData(4) dataOtwOtw(0) lmotwLmotwOtwAtm(1) lmotwLmotwOtwNonAtm(2) otwOtwOtw(3) unknown(5)

Specifies the packet-mode of an aggregate shaper
TmnxPccRuleFilterForwardAction INTEGER

drop(2) forward(1) none(0) redirNh(4) redirNhOrFwd(5) redirUrl(3) remarkDscp(6)

The TmnxPccRuleFilterForwardAction data type is an enumerated integer
that specifies the filter action taken in a PCC rule. The value
redirNhOrFwd (5) means: forward to the specified next hop, but if no
next-hop ip address or service id is given then just forward.
TmnxPccRuleQosForwardAction Bits

account(3) fcRemark(1) flowLimit(6) flowLimit1(7) forward(4) insertRqiQfi(5) l2FromProf(8) monitor(2) rateLimit(0)

The TmnxPccRuleQosForwardAction data type is an enumerated integer
that specifies the qos action taken in a PCC rule.
TmnxPermitDeny INTEGER

deny(2) permit(3)

The TmnxPermitDeny data type is an enumerated integer that describes
whether the entity its action is permitted or denied.
TmnxPermitDenyOrInherit INTEGER

deny(2) inherit(1) permit(3)

The TmnxPermitDenyOrInherit data type is an enumerated integer that
describes whether an entity its action is permitted or denied.

Value 'inherit' indicates the state is inherited from another object
that is usually in another MIB table.
TmnxPortID Unsigned32
A portid is a unique 32 bit number with special encoding.

Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a
description of the various port mapping schemes used by the system for
physical ports and channels.

An 'invalid portid' is a TmnxPortID with a value of 0x1e000000.
TmnxPortOptComplianceExtType Unsigned32
The TmnxPortOptComplianceExtType is an enumerated integer that extends
the tmnxPortOpticalCompliance field of of a small form factor (SFF)
that is inserted into the port
TmnxPppCpState INTEGER

ackReceived(8) ackSent(9) closed(3) closing(5) initial(1) opened(10) requestSent(7) starting(2) stopped(4) stopping(6)

The TmnxPppCpState data type is an enumerated integer that
describes the current status of a PPP link.  It can be applied
to both LCP and NCP links.
TmnxPppNcpProtocol INTEGER

ipcp(1) ipv6cp(2)

The TmnxPppNcpProtocol data type represents the PPP Network Control
Protocol.
TmnxPppoePadoDelay Unsigned32 (0 | 1..30)
The data type TmnxPppoePadoDelay specifies the delay timeout in
deciseconds before sending a PADO (PPPoE Active Discovery Offer).
TmnxPppoeSessionId Unsigned32 (0..65535)
The TmnxPppoeSessionId indicates the 16 bit wide PPPoE session Id.
TmnxPppoeSessionInfoOrigin INTEGER

bonding(13) default(1) dhcp(4) diameterGx(10) diameterNasreq(9) gtp(11) l2tp(7) localPool(8) localUserDb(3) midSessionChange(5) none(0) python(12) radius(2) tags(6)

The TmnxPppoeSessionInfoOrigin indicates the originator of the
provided information.
TmnxPppoeSessionType INTEGER

l2tp(4) local(1) localRetail(3) localWholesale(2)

The TmnxPppoeSessionType indicates the type of PPPoE session.
TmnxPppoeUserName DisplayString (SIZE (1..253))
The data type TmnxPppoeUserName denotes the PPPoE username.
TmnxPppoeUserNameOrEmpty DisplayString (SIZE (0..253))
The data type TmnxPppoeUserNameOrEmpty denotes the PPPoE username.
TmnxPrefixSidFullRange Unsigned32 (0..1048575)
The TmnxPrefixSidFullRange data type indicates the full range  of
possible values for the Prefix SID index or label.

The available Prefix SID range is restricted by the configured  MPLS
SR label range.
TmnxProxyEntryType INTEGER

dup(4) dyn(3) evpn(1) stat(2)

The TmnxProxyEntryType indicates type of proxy ARP or ND entry.
TmnxPwGlobalId Unsigned32 (1..4294967295)
A number used to identify a global pseudo-wire routing identifier.
TmnxPwGlobalIdOrZero Unsigned32
A number used to identify a global pseudo-wire routing identifier or
zero.
TmnxPwPathHopId Unsigned32 (1..16)
A number used to identify a specific hop associated with pseudo-wire
routing path.
TmnxPwPathHopIdOrZero Unsigned32 (0..16)
A number used to identify a specific hop associated with pseudo-wire
routing path.
TmnxQosBytesHex OCTET STRING (SIZE (0..30))

Display hint: 2x

Represents the QoS bytes that has been requested for the bearer
context of an User Equipment (UE).
TmnxQosFlowIdentifier Integer32 (-1 | 0..63)
The TmnxQosFlowIdentifier data type specifies the QoS Flow Identifier
(QFI) that is inserted along with the Reflective QoS Indicator (RQI)
in the header of data packets of a flow. A value -1 means that no QFI
is inserted. (See also TmnxReflectiveQosIndicator.)
TmnxQosMdAutoIDCount Unsigned32 (0..65535)
This data type describes the count of policy IDs that has already been
assigned for Qos objects.
TmnxQosMdAutoPolicyID Unsigned32 (0 | 2..65535)
The identification number of a policy for Qos objects. This ID must be
unique within the Qos Domain. The value 0 is used as the null ID.
TmnxQosRateHigh32 TmnxHigh32 (0 | 1 | 4294967295)
The upper 32 bits of a 64 bit rate value.
TmnxQosRateLow32 TmnxLow32 (0..4294967295)
The lower 32 bits of a 64 bit rate value.
TmnxRadiusFramedRouteMetric Unsigned32 (0..65535)
The TmnxRadiusFramedRouteMetric data type is a number that represents
the value of the metric in a RADIUS Framed-Route option Text field.
TmnxRadiusFramedRoutePreference Unsigned32 (0..255)
The TmnxRadiusFramedRouteMetric data type is a number that represents
the value of the preference in a RADIUS Framed-Route option Text
field.
TmnxRadiusFramedRouteTag Unsigned32 (0..4294967295)
The TmnxRadiusFramedRouteMetric data type is a number that represents
the value of the tag in a RADIUS Framed-Route option Text field.
TmnxRadiusPendingReqLimit Unsigned32 (1..4096)
The TmnxRadiusPendingReqLimit data type is a number that specifies the
limit to the number of pending RADIUS request messages.
TmnxRadiusServerOperState INTEGER

inService(2) outOfService(3) overloaded(5) probing(6) transition(4) unknown(1)

The TmnxRadiusServerOperState data type is an enumerated integer that
describes the values used to identify the operational state of a
RADIUS server.
TmnxReasContextVal Unsigned32 (0..31)
The value of the label used to identify the entity using the specified
context value on a specific port.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 00000000 000XXXXX|
+--------+--------+--------+--------+

The value of this object is encoded in the least significant 5 bits
and represents the context value.
TmnxReferenceBandwidth Unsigned32 (0..4000000000)
The TmnxRadiusPendingReqLimit data type is a number that specifies the
reference bandwidth used for cost calculation.

The formula is:  Cost = reference-bandwidth / bandwidth.

The unit is 1000 bps.

The value zero specifies that no reference-bandwidth is configured.
TmnxReflectiveQosIndicator INTEGER

false(0) noRQI(2) true(1)

The TmnxReflectiveQosIndicator data type specifies the Reflective QoS
Indicator (RQI) that is inserted along with the QoS Flow Identifier
(QFI) in the header of data packets of a flow. A value 2 means that no
RQI is inserted. (See also TmnxQosFlowIdentifier.)
TmnxRipListenerStatus INTEGER

active(1) gtpNotSupported(8) hostInactive(6) inactive(2) l2AwNotSupported(7) mcStandby(9) noEnhancedSubmgt(3) notApplicable(0) parentItfDown(5) ripDisabled(10) wrongAntiSpoof(4)

The status of the RIP Listener session.
TmnxRipNgAuthKey OCTET STRING (SIZE (0..16))
The TmnxRipNgAuthKey TC defines the authentication key to be used when
the authentication type has been configured to either
simplePassword(2), md5(3) or md20(4) (see TmnxRipNgAuthType).
TmnxRipNgAuthType INTEGER

md20(4) md5(3) noAuthentication(1) simplePassword(2)

The TmnxRipNgAuthType TC defines the authentication method to be
used for RIP/RIP-NG. Allowed values are :
  noAuthentication(1) - No authentication method
  simplePassword(2)   - Simple password based authentication
     md5(3)              - 16 byte MD5 Authentication
     md20(4)             - 20 byte MD5 Authentication.
TmnxRouteDistType INTEGER

auto(4) configured(1) default(5) derivedEvi(3) derivedVpls(2) none(0)

TmnxRouteDistType indicates the type of the route-distinguisher.
TmnxRouteTargetOrigin INTEGER

configured(1) derivedEvi(3) derivedVpls(2) none(0) vsi(4)

TmnxRouteTargetOrigin indicates the origin of the route-target policy.
TmnxRsvpDSTEClassType Unsigned32 (0..7)
TmnxRsvpDSTEClassType is an unsigned integer in the range of (0..7)
that defines the class type (CT).
TmnxRsvpSessionNameString DisplayString (SIZE (0..160))
The TmnxRsvpSessionNameString type indicates the RSVP session name
which has extended from 80 to 160 characters.
TmnxSapAASubScope INTEGER

mac(2) none(0) subscriber(1)

The TmnxSapAASubScope data type is an enumerated integer
that specifies the scope of the AA subscriber.
Values:
  none       (0) - The AA subscriber has no scope.
  subscriber (1) - The AA subscriber has esm subscriber scope.
  mac        (2) - The AA subscriber has esm MAC host scope.
TmnxSapIngPolicerStatMode INTEGER

minimal(1) noStats(0) offeredFourProfileWithDiscards(11) offeredLimitedCappedCIR(9) offeredLimitedProfileCIR(7) offeredPriorityCIR(6) offeredPriorityNoCIR(4) offeredProfileCIR(5) offeredProfileCappedCIR(8) offeredProfileNoCIR(2) offeredProfileWithDiscards(10) offeredTotalCIR(3)

TmnxSapIngPolicerStatMode specifies the mode of statistics collected
by this sap ingress policer.
TmnxScriptAuthType INTEGER

cron(1) cron-python(5) event-script(3) event-script-python(6) none(0) subscriber-mgmt-pysros-script(7)

The tmnxCliScriptAuthUserType datatype is an enumerated integer that
indicates the type of module executing a CLI command script.
TmnxSecRadiusServAlgorithm INTEGER

direct(1) round-robin(2)

The TmnxSecRadiusServAlgorithm data type is an enumerated integer that
indicates the algorithm used to access the list of configured RADIUS
servers:
- direct      (1): The first server will be used as primary server for
                   all requests, the second as secondary and so on.
- round-robin (2): The first server will be used as primary server for
                   the first request, the second server as primary for
                   the second request, and so on. If the router gets
                   to the end of the list, it starts again with the
                   first server.
TmnxServId Unsigned32 (0 | 1..2147483647 | 2147483648 | 2147483649 | 2147483650 | 2147483651..2147483690 | 2147483691..2148007980 | 2148007981..2148012076 | 2148012077..2148016172 | 2148016173..2148278316 | 2148278317 | 2148278318..2148278381 | 2148278382 | 2148278382..2148278386 | 2148278387..2148282482)
A number used to identify a Service. This ID must be unique within the
Service Domain. The value 0 is used as the null ID.
TmnxSlaProfileString DisplayString (SIZE (1..32))
The data type TmnxSlaProfileString denotes the SLA profile string.
TmnxSlaProfileStringOrEmpty DisplayString (SIZE (0..32))
The data type TmnxSlaProfileStringOrEmpty denotes the SLA profile
string. The empty string denotes the absence of a SLA profile.
TmnxSlopeMap INTEGER

high(2) highLow(3) low(1) none(0)

TmnxSlopeMap indicates the mapping style of the slope.
TmnxSpbBridgePriority Integer32 (0..15)
TmnxSpbFid indicates the bridge priority for Shortest Path Bridging.
TmnxSpbFdbLocale INTEGER

local(1) sap(2) sdp(3) unknown(4)

TmnxSpbFdbLocale data type is an enumerated integer that describes the
values used to indicate source of forwarding database (FDB) entry for
Shortest Path Bridging (SPB).
TmnxSpbFdbState INTEGER

addModPending(1) delPending(2) noFateShared(4) noUcast(6) ok(0) svcFdbLimit(5) sysFdbLimit(3)

TmnxSpbFdbState data type is an enumerated integer that describes the
values used to indicate state of the forwarding database FDB entry for
Shortest Path Bridging (SPB).
TmnxSpbFid Integer32 (1..4095)
TmnxSpbFid indicates Shortest Path Bridging forwarding database
identifier.
TmnxSpbFidOrZero Integer32 (0..4095)
TmnxSpbFid indicates Shortest Path Bridging forwarding database
identifier.
TmnxSpokeSdpId Unsigned32 (1..4294967295)
A number used to identify a multi-segment pseudo-wire provider-edge
identifier.
TmnxSpokeSdpIdOrZero Unsigned32
A number used to identify a multi-segment pseudo-wire provider-edge
identifier.
TmnxSrrpPriorityStep Integer32 (0..10)
TmnxSrrpPriorityStep indicates the range of the priority steps used by
the operational group to monitor SRRP.
TmnxStatus INTEGER

create(1) delete(2)

The TmnxStatus data type is an enumerated integer that describes the
values used to identify the current status of functional modules in the
system such as OSPF and MPLS protocols. Setting this variable to
'create' causes instantiation of the feature in the system.  Setting it
to 'delete' removes the instance and all associated configuration
information.
TmnxStrSapId DisplayString (SIZE (0..32))
The value of TmnxStrSapId is a printable string which contains the
owner SAP Id or equivalent on a remote system.

The string should contain the printable string equivalent of the
textual conventions TmnxPortID and TmnxEncapVal in the format
specified as TmnxPortID[:TmnxEncapVal]
TmnxSubAcctSessionId DisplayString (SIZE (0..22))
The data type TmnxSubAcctSessionId contains a string that identifies a
subscriber for the purposes of accounting.
TmnxSubAleOffset INTEGER

ipoaLlc(11) ipoaNull(12) ipoe(23) ipoeTagged(24) ipoeoaLlc(13) ipoeoaLlcFcs(14) ipoeoaLlcTagged(15) ipoeoaLlcTaggedFcs(16) ipoeoaNull(17) ipoeoaNullFcs(18) ipoeoaNullTagged(19) ipoeoaNullTaggedFcs(20) none(0) pppoaLlc(1) pppoaNull(2) pppoe(21) pppoeTagged(22) pppoeoaLlc(3) pppoeoaLlcFcs(4) pppoeoaLlcTagged(5) pppoeoaLlcTaggedFcs(6) pppoeoaNull(7) pppoeoaNullFcs(8) pppoeoaNullTagged(9) pppoeoaNullTaggedFcs(10)

The data type TmnxSubAleOffset specifies the encapsulation offset
value of the subscriber in the DSL access loop as used by the 7xxx
system.

This offset is used in 7xxx egress shaping in order to accurately
shape the end user payload.
TmnxSubAleOffsetMode INTEGER

auto(1) none(0)

The data type TmnxSubAleOffsetMode specifies the way the encapsulation
offset of the subscriber in the DSL access loop is learned by the 7xxx
system.

This offset is used in 7xxx egress shaping, adjusting the subscriber
aggregate rate to account for the fixed encapsulation offset and per
packet variable expansion of the last mile for the specific session
used by the subscriber host.

The value 'none' disables the adjustment.

While the value is 'auto', the encapsulation offset will be learned
for example from the encapsulation type value signaled in the
Access-loop-encapsulation sub-TLV in the Vendor-Specific PPPoE Tags or
DHCP Relay Options [rfc4679].
TmnxSubAltProfThresholdType INTEGER

none(0) subscriberCount(1)

The TmnxSubAltProfThresholdType data type is an enumerated integer
that specifies the threshold type for deciding if the alternate
sub-profile and/or sla-profile must be used for a subscriber host. See
tmnxSubAltProfThresholdType.
TmnxSubAuthPlcyUserNameOp INTEGER

appendDomain(1) defaultDomain(4) noOperation(0) replaceDomain(3) stripDomain(2)

The TmnxSubAuthPlcyUserNameOp data type is an enumerated integer that
specifies the operation to perform on the user-name before sending it
to the RADIUS server.
TmnxSubBondingConnIdOrEmpty Unsigned32 (0 | 1..2)
The data type TmnxSubBondingConnIdOrEmpty represents the index of the
bonding connection. The value '0' means that index is not specified.
TmnxSubCallingStationIdType INTEGER

llid(5) mac(2) remoteId(4) sapId(3) sapString(1)

The TmnxSubCallingStationIdType data type is an enumerated integer that
specifies what string will be put in the RADIUS or DIAMETER Calling-Station-Id
attribute:
- sapString (1): the value of TIMETRA-SAP-MIB::sapCallingStationId of
                 the subscriber host SAP;
- mac       (2): the subscriber host MAC address, formatted as a
                 lower case ASCII string with octet values
                 separated by a ':';
- sapId     (3): the subscriber host SAP identifier, formatted as
                 an ASCII string.
- remoteId  (4): the intermediate agent Remote ID as received by means
                 of, for example, a PPPoE vendor-specific tag,
                 a DHCP Agent Remote ID Sub-option or
                 an L2TP Access Line Agent-Remote-Id AVP.
- llid      (5): the logical link identifier as received during
                 pre-authentication.
TmnxSubCreditVolumeUnit INTEGER

bytes(0) gigabytes(3) kilobytes(1) megabytes(2)

The TmnxSubCreditVolumeUnit data type is an enumerated integer that
specifies the unit in which the volume-credit is expressed.
TmnxSubHostGrouping INTEGER

perGroup(2) perSap(1) perSessionIpoe(4) perSessionPfcp(5) perSessionPpp(3)

The TmnxSubHostGrouping data type is an enumerated integer that
indicates the way hosts associated with a given subscriber and SAP are
grouped together to share an SLA profile instance.
TmnxSubHostSessionLimitOverride Integer32 (-2..131071)
The TmnxSubHostSessionLimitOverride data type is an integer that
indicates the maximum number of hosts using....

The value -1 indicates that there is no limit

The value -2 indicates that the AAA server did not specify an
override.
TmnxSubIdentShortString DisplayString (SIZE (1..32))
The data type TmnxSubIdentShortString denotes the short subscriber
identification string.
TmnxSubIdentString DisplayString (SIZE (1..64))
The data type TmnxSubIdentString denotes the subscriber identification
string.
TmnxSubIdentStringOrEmpty DisplayString (SIZE (0..64))
The data type TmnxSubIdentStringOrEmpty denotes the subscriber
identification string. The empty string denotes the absence of a
subscriber identification string.
TmnxSubMgtIntDestId TmnxSubMgtIntDestIdOrEmpty (SIZE (1..32))
The data type TmnxSubMgtIntDestId denotes the intermediate destination
id.
TmnxSubMgtIntDestIdOrEmpty DisplayString (SIZE (0..32))
The data type TmnxSubMgtIntDestIdOrEmpty denotes the intermediate
destination id. The empty string denotes the absence of an
intermediate destination id.
TmnxSubMgtOrgStrOrZero DisplayString (SIZE (0..32))
The data type TmnxSubMgtOrgStrOrZero denotes the organization string.
The empty string denotes the absence of an organization string.
TmnxSubMgtOrgString TmnxSubMgtOrgStrOrZero (SIZE (1..32))
The data type TmnxSubMgtOrgStrOrZero denotes the organization string.
TmnxSubNasPortPrefixType INTEGER

none(0) userString(1)

The TmnxSubNasPortPrefixType data type is an enumerated integer that
specifies what prefix will be added to the RADIUS NAS-Port attribute:
- none       (0): No prefix will be added.
- userString (1): A user configurable string will be added.
TmnxSubNasPortSuffixType INTEGER

circuitId(1) none(0) remoteId(2)

The TmnxSubNasPortSuffixType data type is an enumerated integer that
specifies what suffix will be added to the RADIUS NAS-Port attribute:
- none      (0): No suffix will be added.
- circuitId (1): If available, the circuit-id will be added.
- remoteId  (2): If available, the remote-id will be added.
TmnxSubNasPortTypeType INTEGER

config(2) standard(1)

The TmnxSubNasPortTypeType data type is an enumerated integer that
specifies what value will be put in the NAS-Port-Type attribute
of RADIUS or DIAMETER messages:
- standard  (1): according to the RADIUS specification
                 RFC 2865 section 5.41 NAS-Port-Type and
                 RFC 4603 Additional Values for the NAS-Port-Type Attribute;
- config    (2): a configured value.
TmnxSubOperSpiGroupId Integer32
The TmnxSubOperSpiGroupId data type is an integer that indicates the
SLA profile instance group identifier specified by the AAA server.

A value of minus one indicates that the AAA server did not specify
such a group identifier.
TmnxSubPfcpCurrPeerNodeIdType INTEGER

fqdn(2) none(0) useIpAddress(1)

The TmnxSubPfcpCurrPeerNodeIdType data type is an enumerated integer
that describes the values used to identify a PFCP peer node.

The value 'none' means that the peer nodeId is not yet known.

The value 'useIpAddress' means that an IP address is used.

The value 'fqdn' means that a Fully Qualified Domain Name (FQDN) is
used.
TmnxSubPfcpNodeIdDomainName DisplayString (SIZE (0..255))
A Fully Qualified Domain Name.
TmnxSubPfcpNodeIdType INTEGER

fqdn(2) none(0) useIpAddress(1)

The TmnxSubPfcpNodeIdType data type is an enumerated integer that
describes the values used to identify a PFCP node.

The value 'useIpAddress' means that an IP address is used.

The value 'fqdn' means that a Fully Qualified Domain Name (FQDN) is
used.
TmnxSubPfcpPeerNodeIdType INTEGER

none(0) reserved2(2) useIpAddress(1)

The TmnxSubPfcpPeerNodeIdType data type is an enumerated integer that
describes the values used to identify a PFCP peer node.

The value 'useIpAddress' means that an IP address is used.

The value 'fqdn' means that a Fully Qualified Domain Name (FQDN) is
used.
TmnxSubPfcpPeerSystemNodeIdType INTEGER

fqdn(2) useIpAddress(1)

The TmnxSubPfcpPeerSystemNodeIdType data type is an enumerated integer
that describes the values used to identify a PFCP peer node id.

The value 'useIpAddress' means that an IP address is used.

The value 'fqdn' means that a Fully Qualified Domain Name (FQDN) is
used.
TmnxSubPoolName TLNamedItem
The name of a pool
TmnxSubProfileString DisplayString (SIZE (1..32))
The data type TmnxSubProfileString denotes the subscriber profile
string.
TmnxSubProfileStringOrEmpty DisplayString (SIZE (0..32))
The data type TmnxSubProfileStringOrEmpty denotes the subscriber
profile string. The empty string denotes the absence of a subscriber
profile.
TmnxSubRadIsaServAlgorithm INTEGER

direct(1) directPriority(4) hashBased(3) roundRobin(2)

The TmnxSubRadIsaServAlgorithm data type is an enumerated integer that
indicates the algorithm used to access the list of configured RADIUS
servers:
- direct         (1): The first server will be used as primary server for
                       all requests, the second as secondary and so on.
- roundRobin     (2): The first server will be used as primary server for
                       the first request, the second server as primary for
                       the second request, and so on. If the router gets
                       to the end of the list, it starts again with the
                       first server.
- hashBased      (3): The server will be selected based on a specified
                       hash value.
- directPriority (4): The first server will be used as primary server for
                       all requests, the second as secondary and so on.
                       Higher priority servers that are operationally down
                       will be probed and put back into service upon a
                       response.
TmnxSubRadServAlgorithm INTEGER

direct(1) hashBased(3) roundRobin(2)

The TmnxSubRadServAlgorithm data type is an enumerated integer that
indicates the algorithm used to access the list of configured RADIUS
servers:
- direct     (1): The first server will be used as primary server for
                   all requests, the second as secondary and so on.
- roundRobin (2): The first server will be used as primary server for
                   the first request, the second server as primary for
                   the second request, and so on. If the router gets
                   to the end of the list, it starts again with the
                   first server.
- hashBased  (3): The server will be selected based on a specified
                   hash value.
TmnxSubRadiusAttrType Unsigned32 (0..255)
The TmnxSubRadiusAttrType data type contains a number that indicates a
RADIUS attribute type.
TmnxSubRadiusDisplayString DisplayString (SIZE (0..253))
The TmnxSubRadiusOctetString data type contains a character string
that corresponds to a Radius attribute.
TmnxSubRadiusOctetString OCTET STRING (SIZE (253))
The TmnxSubRadiusOctetString data type contains an octet string that
corresponds to a Radius attribute
TmnxSubRadiusVendorId Unsigned32 (0..16777215)
The TmnxSubRadiusVendorId data type contains a number that indicates a
RADIUS Vendor-Id.
TmnxSubShcvAction INTEGER

alarm(1) remove(2)

The TmnxSubShcvAction data type is an enumerated integer that
describes the values used to identify the action taken when Subscriber
Host Connectivity Verification (SHCV) failed.
TmnxSubShcvInterval Unsigned32 (0..6000)
The TmnxSubShcvInterval data type is a number that specifies the
interval in minutes between connectivity checks.

The value zero means no connectivity checking.
TmnxSubShcvRetryCount Unsigned32 (2..29)
The TmnxSubShcvRetryTimeout data type is a number that specifies the
number of connectivity check retransmissions.

Setting the value to n specifies that, for any given host, at most
(n+1) probes are done each interval, and (n+1) missed replies are
considered as a connectivity failure.
TmnxSubShcvRetryTimeout Unsigned32 (10..60)
The TmnxSubShcvRetryTimeout data type is a number that specifies the
timeout in seconds before a connectivity check retransmission.
TmnxSubShcvSrcIpOrigin INTEGER

interface(1) vrrp(2)

The TmnxSubShcvSrcIpOrigin data type is an enumerated integer that
describes the values used to identify the origin of the source IP
address used for connectivity verification in a layer-3 service (IES
or VPRN).

The value 'interface' means that the IP address of the interface is
used.

The value 'vrrp' means that the primary IP address of the Virtual
Router Redundancy Protocol (VRRP) is used.
TmnxSubSlaMode INTEGER

expanded(0) single(1)

The TmnxSubSlaMode data type is an enumerated integer that specifies
the handling of SLA profile instances for a subscriber.
- Expanded sla-mode: a subscriber is allowed to have multiple SLA
  profile instances, using different SLA profiles and/or different
  VLANs.
- Single sla-mode: only 1 single SLA profile instance is allowed for a
  subscriber. This restriction has 2 implications:
  - Last SLA profile wins: if a new host is added with an SLA profile
    that is different from the existing hosts of the subscriber, or an
    existing host is changed to use a different SLA profile, then all
    existing hosts of that subscriber will be changed to the new SLA
    profile.
  - First VLAN wins: All hosts of a subscriber must use the same VLAN,
    i.e. a new host on different VLAN is rejected.
TmnxSubSpiGroupId Integer32 (-1..65535)
The TmnxSubSpiGroupId data type is an integer that specifies the SLA
profile instance group identifier.

A value of minus one means that there is no group identifier
configured.
TmnxSubTerminationType INTEGER

local(1) localRetail(3) localWholesale(2)

The TmnxSubTerminationType indicates how the subscriber host or
session is terminated.
TmnxSubTerminationTypeOrZero INTEGER

local(1) localRetail(3) localWholesale(2) notApplicable(0)

The TmnxSubTerminationType indicates how the subscriber host or
session is terminated. Zero indicates no subscriber host is
terminated.
TmnxSvcEvi Integer32 (1..16777215)
The TmnxSvcEvi specifies an ethernet EVPN identifier value.
TmnxSvcEviOrZero Integer32 (0..16777215)
The TmnxSvcEviOrZero specifies an ethernet EVPN identifier value. Zero
indicates no such value specified.
TmnxSvcEvpnMplsTransportType INTEGER

bgp(7) invalid(0) isis(6) ldp(4) local(1) mplsFwdPolicy(11) ospf(5) ribApi(12) rsvp(3) srOspf3(13) srPolicy(10) srTe(8) static(2) udp(9)

The type of this transport entity.
TmnxSvcOperGrpCreationOrigin INTEGER

dynScript(7) manual(1) mvrp(2)

A number used to identify creation origin for the service operational
group.
TmnxSyslogFacility INTEGER

auth(4) authpriv(10) cron(9) cron2(15) ftp(11) kernel(0) local0(16) local1(17) local2(18) local3(19) local4(20) local5(21) local6(22) local7(23) logalert(14) logaudit(13) mail(2) netnews(7) ntp(12) printer(6) syslogd(5) systemd(3) user(1) uucp(8)

The value of TmnxSyslogFacility is an enumerated integer that
specifies which syslog facility is the intended destination for the
log event stream.
TmnxSyslogSeverity INTEGER

alert(1) critical(2) debug(7) emergency(0) error(3) info(6) notice(5) warning(4)

The value of TmnxSyslogSeverity is an enumerated integer that
specifies the severity levels of syslog messages.
TmnxTacplusAccessOpType INTEGER

delete(1) none(0)

The TmnxTacplusAccessOpType data type is an enumerated integer
that specifies the access operation for tacplus authorization.
Values:
  none       (0) - No operation.
  subscriber (1) - Delete operation.
TmnxThresholdGroupType INTEGER

brMgmtCfFailure(3) brMgmtCfSuccess(2) brMgmtLimit(1) brMgmtTraffic(4) mgIsmSystem(7) pathMgmt(5) pdnConnections(6)

The TmnxThresholdGroupType is an enumerated integer that describes the
group type in threshold based monitoring.

brMgmtLimit - indicates the group for bearer management limit
brMgmtCfSuccess - indicates the group for bearer management
                  call flow success
brMgmtCfFailure - indicates the group for bearer management
                  call flow failure
brMgmtTraffic - indicates the group for bearer management traffic
pathMgmt - indicates the group for path management
mgIsmSystem - indicates the group for the system of mobile gateway
              integrated service module
pdnConnections - indicates the group for the Packet Data Network (PDN)
                 connections.
TmnxTimeInSec Unsigned32 (0..86400)
The data type TmnxTimeInSec describes the Tariff Time for the Charging
Data Record (CDR).
TmnxTimeInterval Unsigned32
The TmnxTimeInterval data type is used anywhere the SNMPv2-TC
TimeInterval TEXTUAL-CONVENTION can be used when an object requires
longer intervals than 248 days.

A period of time, measured in units of centiseconds.
TmnxTlsGroupId Unsigned32 (1..4094)
A number used to identify a TLS Group. This ID must be unique within
that Service Domain.
TmnxTreeSidOrigin INTEGER

bgpSrPolicy(20) configuration(30) pcep(10)

TmnxTreeSidOrigin identifies origin information for tree-sid feature.
TmnxTreeSidOwner INTEGER

none(0) pce(2) srPol(3) static(1)

TmnxTreeSidOwner identifies owner information for tree-sid feature.
TmnxTunnelGroupId Unsigned32 (1..64)
The value of TmnxTunnelGroupId specifies the tunnel-group identifier.
TmnxTunnelGroupIdOrZero Unsigned32 (0..64)
The value of TmnxTunnelGroupId specifies the tunnel-group identifier
including zero indicating that group-id is not specified.
TmnxTunnelID Unsigned32
The identifying value for a BGP-VPRN tunnel.  Depending on the
tunnel type the associated tunnel id may be an sdp-id, an LSP ID
or zero(0).
TmnxTunnelType INTEGER

bgp(7) bypass(5) gre(4) invalid(6) ldp(2) rsvp(3) sdp(1)

The type of this tunnel entity.
TmnxTunnelTypeExt INTEGER

bgp(9) bgpEpe(17) bypass(7) fpe(11) gre(8) invalid(1) isis(6) ldp(4) mplsFwdPolicy(14) ospf(5) ospfV3(13) reserved22(22) ribApi(16) rsvp(3) sdp(2) srPolicy(15) srTe(10) srv6(21) srv6Isis(18) srv6Policy(19) udp(12) vxlan(20)

The type of this tunnel entity.
TmnxUdpPort Integer32 (0..65535)
The value of TmnxUdpPort is the port used to send messages
to an event collector target.  514 is the IANA assigned port number
for syslog.  162 is the IANA assigned port number for SNMP
notifications.
TmnxUrpfCheckMode INTEGER

loose(2) strict(1) strictNoEcmp(3)

The TmnxUrpfCheckMode is the mode of operation of Unicast Reverse Path
Forwarding (uRPF).

A value of 'strict' means that uRPF checks if the incoming packet has
a source address that matches a prefix in the routing table, and if
the interface expects to receive a packet with this source address
prefix.

A value of 'loose' means that the uRPF checks if the incoming packet
has a source address with a corresponding prefix in the routing table,
but not if the interface expects to receive a packet with a specific
source address prefix.

A value of 'strictNoEcmp' means that the uRPF drops a packet with a
source address that matches an ECMP route and otherwise behaves the
same as in 'strict' mode.
TmnxUserPassword DisplayString (SIZE (0..60))
The value of TmnxUserPassword indicates a password as a plaintext
string, or as a bcrypt encrypted hash.

The value of TmnxUserPassword cannot be more than 56 characters if it
is a plaintext string.

Any GET request on this type of object returns an empty string.
TmnxUuid OCTET STRING (SIZE (16))

Display hint: 4x-2x-2x-2x-6x

The value of TmnxUuid specifies the Universally Unique Identifier
(UUID). The UUID consists of 32 hexadecimal digits.
TmnxVPNRouteDistinguisher OCTET STRING (SIZE (8))
The VPRN route distinguisher is a 8-octet object. It contains a
2-octet type field followed by a 6-octet value field. The type field
specify how to interpret the value field.

Type 0 specifies two subfields as a 2-octet administrative field and a
4-octet assigned number subfield.

Type 1 specifies two subfields as a 4-octet administrative field which
must contain an IP address and a 2-octet assigned number subfield.

Type 2 specifies two subfields as a 4-octet administrative field which
contains a 4-octet AS number and a 2-octet assigned number subfield.
TmnxVRtrID Integer32 (1..10240)
A number used to identify a virtual router instance in the system.
TmnxVRtrIDOrZero Integer32 (0..10240)
A number used to identify a virtual router instance in the system. The
number 0 will have special significance in the context the TC is used.
TmnxVRtrMplsLspID Unsigned32 (0..65535 | 65536..131070)
A unique value for each Label Switched Path in the managed system.

The higher range IDs are used for segment routing LSPs.

The lower range IDs are used for regular LSPs.
TmnxVRtrMplsLspIDNoZero Unsigned32 (1..65535 | 65536..131070)
A unique value, greater than zero, for each Label Switched Path in the
managed system.

The higher range IDs are used for segment routing LSPs.

The lower range IDs are used for regular LSPs.
TmnxVcId Unsigned32 (1..4294967295)
A 32 bit number is used to identify a VC(Virtual Circuit). The VC ID
cannot be 0.
TmnxVcIdOrNone Unsigned32 (0 | 1..4294967295)
A 32 bit number is used to identify a VC(Virtual Circuit). A value of
0 indicates no VC ID is configured or available.
TmnxVcType INTEGER

atmCell(3) atmSdu(2) atmVccCell(9) atmVpcCell(10) cesopsn(21) cesopsnCas(23) ethernet(5) ethernetVlan(4) frDlci(25) frDlciMartini(1) ipipe(11) mirrorDest(4096) satopE1(17) satopE3(19) satopT1(18) satopT3(20)

The value of TmnxVcType is an enumerated integer that indicates a
Virtual Circuit (VC) type. 'frDlciMartini(1)' replaces the old
'frDlci' when used over martini tunnels.
TmnxVdoAnalyzerAlarm INTEGER

none(0) poa(3) qos(2) tnc(1)

The data type TmnxVdoAnalyzerAlarm is an enumerated integer that
specifies the severity of the analyzer state alarm. Setting a variable
of this type to 'none' indicates no error level. A value of 'tnc'
indicates a TNC (Tech Non-Conformance) error level.A value of 'qos'
indicates a QOS (Quality of Service) error level. A value of 'poa'
indicates a POA (Program off Air) error level.
TmnxVdoAnalyzerAlarmStates OCTET STRING (SIZE (10))
The data type TmnxVdoAnalyzerAlarmStates is an octet string that
represents the analyzer state for the past 10 seconds. Setting a
variable of this type to 'good'(00) indicates either there was no
alarm during that second or the state of the stream has been cleared
from a prior errored state. A value of 'tnc'(01)indicates a TNC (Tech
Non-Conformance) error occurred during that second. A value of
'qos'(02) indicates a QOS (Quality of Service) error occurred during
that second. A value of 'poa'(03) indicates a POA (Program off Air)
error occurred during that second.

Since the octet string is 10 bytes long, the 10th byte indicates
the most recent state of the stream. Below is how an example stream
would appear. Each byte in the stream holds an alarm state for a
second.
good (00),  --  stream was good during 1st second
tnc  (01),  --  stream had tnc error during 2nd second
qos  (02),  --  stream had qos error during 3rd second
qos  (02),  --  stream had qos error during 4th second
qos  (02),  --  stream had qos error during 5th second
good (00),  --  stream error was cleared during 6th second
good (00),  --  stream was good during 7th second
tnc  (01),  --  stream had tnc error during 8th second
poa  (03),  --  stream had poa error during 9th second
good (00)   --  stream error was cleared during 10th second.
TmnxVdoFccServerMode INTEGER

burst(1) dent(2) hybrid(3) none(0)

The TmnxVdoFccServerMode data type is an enumerated integer that
describes the mode of the Fast Channel Change (FCC) server.

A value of 'burst' indicates that the FCC server is enabled and will
send the channel at a nominally faster rate than the channel was
received based on the
TIMETRA-MCAST-PATH-MGMT-MIB::tmnxMcPathVdoPlcyFCCBurst setting.

A value of 'dent' indicates that the FCC server will selectively
discard frames from the original stream based on the value of
TIMETRA-MCAST-PATH-MGMT-MIB::tmnxMcPathVdoPlcyFCCDentThd.

A value of 'hybrid' indicates that the FCC server will use combination
of 'burst' and 'dent' to send the unicast stream to the client.

A value of 'none' indicates that FCC server is disabled.
TmnxVdoGrpId Unsigned32 (0..4)
TmnxVdoGrpId data type describes the identifier for a video group.
TmnxVdoGrpIdIndex Unsigned32 (1..4)
TmnxVdoGrpIdIndex data type describes the id of a
TIMETRA-VIDEO-MIB::tmnxVdoGrpEntry and is the primary index for the
table.
TmnxVdoGrpIdOrInherit Integer32 (-1 | 0..4)
The data type describes the identifier for a video group. A value of
'-1' indicates that identifier will be inherited from another object
that is usually in another MIB table.
TmnxVdoIfName TNamedItem
The data type describes the name of a video interface. The name of a
video interface must always start with a letter.
TmnxVdoOutputFormat INTEGER

rtp-udp(2) udp(1)

The data type TmnxVdoOutputFormat is an enumerated integer that
specifies the output format of the video stream. Setting a variable of
this type to 'udp' causes the video stream to be of type 'udp' whereas
setting a value of 'rtp-udp' causes the video stream to be of type
'rtp-udp'.
TmnxVdoPortNumber Unsigned32 (1024..5999 | 6251..65535)
The data type describes the port number of an Internet transport layer
protocol.
TmnxVdoStatInt INTEGER

current(1) interval(2)

The data type TmnxVdoStatInt is an enumerated integer that specifies
the time duration for which the video statistics are being counted.
Setting a variable of this type to 'current' causes the time duration
to be set to one second which is the least allowed value. A value of
'interval' makes it necessary for some other MIB object to actually
quantify the time interval.
TmnxVeId Integer32 (-1 | 1..65535)
The TmnxVeId is the vpls-edge-range.
TmnxVni Unsigned32 (1..16777215)
The TmnxVni data type indicates range for VNI.
TmnxVniOrZero Unsigned32 (0..16777215)
The TmnxVni data type indicates range for VNI.
TmnxVpnIpBackupFamily Bits

ipv4(0) ipv6(1)

The value of TmnxVpnIpBackupFamily specifies the respective vpn family
for which backup paths would be enabled.
TmnxVxlanInstance Unsigned32 (1)
The TmnxVxlanInstance data type indicates range for the VXLAN
instance.
TmnxWaveKey Unsigned32 (0..4095)
The value of TmnxWaveKey specifies the Wavelength to be transmitted on
the interface's optical signal.

The following table describes the possible values based on ITU
channel. Key1 and Key2 must match in modulo 2 with each other.

Index   ITU          Key 1        Key 2
       channel   First Last      First Last
-------------------------------------------
   0      61     1548  1548      2032  2032  // 1696 Test Channel

   // Original Tropic Channels (index 1 to 32)
   1      59        1    15       545   559
   2      58       18    32       562   576
   3      57       35    49       579   593
   4      56       52    66       596   610
   5      54       69    83       613   627
   6      53       86   100       630   644
   7      52      103   117       647   661
   8      51      120   134       664   678
   9      49      137   151       681   695
  10      48      154   168       698   712
  11      47      171   185       715   729
  12      46      188   202       732   746
  13      44      205   219       749   763
  14      43      222   236       766   780
  15      42      239   253       783   797
  16      41      256   270       800   814
  17      39      273   287       817   831
  18      38      290   304       834   848
  19      37      307   321       851   865
  20      36      324   338       868   882
  21      34      341   355       885   899
  22      33      358   372       902   916
  23      32      375   389       919   933
  24      31      392   406       936   950
  25      29      409   423       953   967
  26      28      426   440       970   984
  27      27      443   457       987  1001
  28      26      460   474      1004  1018
  29      24      477   491      1021  1035
  30      23      494   508      1038  1052
  31      22      511   525      1055  1069
  32      21      528   542      1072  1086

  // 1696 Extension 42 channels (index 33 to 42)
  33      60     1089  1103      1573  1587
  34      55     1106  1120      1590  1604
  35      50     1123  1137      1607  1621
  36      45     1140  1154      1624  1638
  37      40     1157  1171      1641  1655
  38      35     1174  1188      1658  1672
  39      30     1191  1205      1675  1689
  40      25     1208  1222      1692  1706
  41      20     1225  1239      1709  1723
  42      19     1242  1256      1726  1740

  // 1830 Extension to 44 channels (index 43 and 44)
  43      18     1259  1273      1743  1757
  44      17     1276  1290      1760  1774

  // 1830 Extension to 88 channels (index 45 to 88)
  45     595     1293  1307      1777  1791
  46     585     1310  1324      1794  1808
  47     575     1327  1341      1811  1825
  48     565     1344  1358      1828  1842
  49     545     1361  1375      1845  1859
  50     535     1378  1392      1862  1876
  51     525     1395  1409      1879  1893
  52     515     1412  1426      1896  1910
  53     495     1429  1443      1913  1927
  54     485     1446  1460      1930  1944
  55     475     1463  1477      1947  1961
  56     465     1480  1494      1964  1978
  57     445     1497  1511      1981  1995
  58     435     1514  1528      1998  2012
  59     425     1531  1545      2015  2029
  60     415     1548  1562      2032  2046
  61     395     3585  3599      2049  2063
  62     385     3602  3616      2066  2080
  63     375     3619  3633      2083  2097
  64     365     3636  3650      2100  2114
  65     345     3653  3667      2117  2131
  66     335     3670  3684      2134  2148
  67     325     3687  3701      2151  2165
  68     315     3704  3718      2168  2182
  69     295     3721  3735      2185  2199
  70     285     3738  3752      2202  2216
  71     275     3755  3769      2219  2233
  72     265     3772  3786      2236  2250
  73     245     3789  3803      2253  2267
  74     235     3806  3820      2270  2284
  75     225     3823  3837      2287  2301
  76     215     3840  3854      2304  2318
  77     605     3857  3871      2321  2335
  78     555     3874  3888      2338  2352
  79     505     3891  3905      2355  2369
  80     455     3908  3922      2372  2386
  81     405     3434  3448      3946  3960
  82     355     3451  3465      3963  3977
  83     305     3468  3482      3980  3994
  84     255     3485  3499      3997  4011
  85     205     3502  3516      4014  4028
  86     195     3519  3533      4031  4045
  87     185     3536  3550      4048  4062
  88     175     3553  3567      4065  4079
-------------------------------------------
TmnxWlanGwIsaGrpId Unsigned32 (1..4)
The TmnxWlanGwIsaGrpId data type contains an identification number for
a Wireless Local Access Network Gateway Integrated Service Adaptor
group.
TmnxWlanGwIsaGrpIdOrZero Unsigned32 (0..4)
The TmnxWlanGwIsaGrpIdOrZero data type contains an identification
number for a Wireless Local Access Network Gateway Integrated Service
Adaptor (ISA) group.

The value zero means that no WLAN Gateway ISA Group is defined.
TruthValueNoTypeTranslator INTEGER

false(2) true(1)

Represents a boolean value.
VRtrIgmpHostMcRDstStatType INTEGER

dropLost(6) dropTx(3) joinDenyLost(5) joinDenyTx(2) joinLost(4) joinTx(1)

The VRtrIgmpHostMcRDstStatType data type is an enumerated integer that
indicates a type of IGMP host mcast reporting destination statistics.

Used by