TmnxMobAccessType INTEGEReps(1) gprs(2) non3gpp(3)
The data type TmnxMobAccessType describes the various access types.
eps - evolved packet system.
gprs - general packet radio services.
non3gpp - trusted non-3gpp network such as evolved High Rate
Packet Data (eHRPD) and untrusted non-3gpp network.TmnxMobAddrScheme INTEGERstateful(1) stateless(2)
The data type TmnxMobAddrScheme describes the addressing scheme. If
the value is set to 'stateful', User Equipment (UE) uses DHCPv6 to get
IPv6 address. If the value is set to 'stateless', UE uses ICMPv6 to
get IPv6 address.
TmnxMobApn DisplayString (SIZE (1..100))The data type TmnxMobApn describes the Access Point Name (APN)
associated with an User Equipment (UE).
TmnxMobApnDomainName DisplayString (SIZE (1..108))The data type TmnxMobApnDomainName holds a DNS Domain Name derived
from an Access Point Name (APN).
The maximum size is arbitrarily chosen in order to be large enough to
hold a Network Identifier of length 63, and small enough to be used as
index in a table.
TmnxMobApnOrZero DisplayString (SIZE (0..100))The data type TmnxMobApnOrZero describes the Access Point Name (APN)
associated with an User Equipment (UE).
TmnxMobArp Unsigned32 (0..15)The data type TmnxMobArp describes the QoS parameter, Allocation and
Retention Priority (ARP).
TmnxMobArpValue Unsigned32 (1..15)The data type TmnxMobArpValue describes the Allocation and Retention
Priority (ARP) value.
TmnxMobArpValueOrZero Unsigned32 (0..15)The data type TmnxMobArpValueOrZero describes the Allocation and
Retention Priority (ARP) value.
TmnxMobAuthType INTEGERdiameter(2) radius(1)
The data type TmnxMobAuthType describes the authentication type used
by mobile gateways.
TmnxMobAuthUserName INTEGERimsi(1) msisdn(2) pco(3)
The data type TmnxMobAuthUserName describes the user name used in
authentication requests by mobile gateways.
TmnxMobBearerId Unsigned32 (1..15)The data type TmnxMobBearerId describes the bearer identifier.
TmnxMobBearerType INTEGERdedicated(2) default(1)
The data type TmnxMobBearerType describes the type of a bearer.
TmnxMobBufferLimit Unsigned32 (1000..12000)The data type TmnxMobBufferLimit describes the buffer limit in bytes.
TmnxMobChargingBearerType INTEGERhome(1) roaming(3) visiting(2)
The data type TmnxMobChargingBearerType describes the type of a bearer
context used in charging applications.
TmnxMobChargingLevel INTEGERbearer(2) pdn(1)
The data type TmnxMobChargingLevel describes the level where the
charging is done.
TmnxMobChargingProfile Unsigned32 (0..255)The data type TmnxMobChargingProfile describes the charging trigger
rules applied for generating Charging Data Records (CDR) for
subscribers.
TmnxMobChargingProfileOrInherit Integer32 (-1 | 0..255)The data type TmnxMobChargingProfileOrInherit describes the charging
trigger rules applied for generating Charging Data Records (CDR) for
subscribers. A value of '-1' indicates that identifier will be
inherited from another object that is usually in another mib table.
TmnxMobDfPeerId Unsigned32 (1..16)The data type TmnxMobDfPeerId identifies Delivery Function (DF) peer
for the mobile gateways.
TmnxMobDiaDetailPathMgmtState INTEGERclosed(2) error(0) idle(1) localShutdown(3) open(7) openCoolingDown(8) remoteClosing(4) waitCea(6) waitConnAck(5) waitDns(9)
The data type TmnxMobDiaDetailPathMgmtState describes the detail state
of a path for a diameter connection.
TmnxMobDiaPathMgmtState INTEGERactive(3) inactive(2) shutDown(0) shuttingDown(1)
The data type TmnxMobDiaPathMgmtState describes the state of a path
for a diameter connection.
TmnxMobDiaPeerHost DisplayString (SIZE (0..80))The data type TmnxMobDiaPeerHost describes the name of a destination
realm, originating realm and originating host.
TmnxMobDiaRetryCount Unsigned32 (0..8)The data type TmnxMobDiaRetryCount describes the diameter peer retry
count value.
TmnxMobDiaTransTimer Unsigned32 (1..180)The data type TmnxMobDiaTransTimer describes the diameter peer
transaction timer value in seconds.
TmnxMobDualStackPref INTEGERipv4(1) ipv6(2) useCplane(3)
The data type TmnxMobDualStackPref describes the preference in a dual
IP stack.
The value 'useCplane' specifies that the value is inherited from the
preference in a dual IP stack on control plane.
TmnxMobExtQci Unsigned32 (0..255)The data type TmnxMobQci describes the QoS Class Identifier extended
range.
TmnxMobGwId Unsigned32 (1..8)The data type TmnxMobGwId identifies mobile gateways.
TmnxMobGwType INTEGERpgw(2) sgw(1) wlanGw(3)
The data type TmnxMobGwType describes the mobile gateway type.
TmnxMobImei DisplayString (SIZE (0 | 16))The data type TmnxMobImei describes the International Mobile Equipment
Identity (IMEI) of an User Equipment (UE).
TmnxMobImsi OCTET STRING (SIZE (8))The data type TmnxMobImsi describes the International Mobile
Subscriber Identity (IMSI) of an User Equipment (UE).
IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN). The internal
representation of the IMSI is as follows:
Bits 63-62 are reserved.
Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.
Bits 59-0 hold the 15 IMSI BCD digits D1-15.
When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.
IMSI encoding for a 2-digit MNC:
63 55 47 39 0
+-----------+-----------+-----------+-------------------------+
| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)
+-----------+-----------+-----------+-------------------------+
IMSI encoding for a 3-digit MNC:
63 55 47 39 35 0
+-----------+-----------+-----------+-------------------------+
| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)
+-----------+-----------+-----------+-------------------------+
Bits 63-56 of the IMSI are carried in octet number 1 of the octet
string and bits 7-0 are carried in octet number 8 of the octet string.
TmnxMobImsiStr DisplayString (SIZE (0 | 9..15))The data type TmnxMobImsiStr describes the International Mobile
Subscriber Identity (IMSI) of a User Equipment (UE).
TmnxMobIpCanType INTEGERepc3gpp(1) gprs3gpp(2)
The data type TmnxMobIpCanType describes the type of Internet Protocol
Connectivity Access Network (IP-CAN) session as Evolved Packet Core
(epc3gpp) or GPRS (gprs3gpp).
TmnxMobLiTarget OCTET STRING (SIZE (8))The data type TmnxMobLiTarget describes the target for the
interception.
The target can be of type International Mobile Subscriber Identity
(IMSI), Mobile Subscriber Integrated Services Digital Network (MSISDN)
or International Mobile Equipment Identity (IMEI).
IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN). The internal
representation of the IMSI is as follows:
Bits 63-62 are reserved.
Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.
Bits 59-0 hold the 15 IMSI BCD digits D1-15.
When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.
IMSI encoding for a 2-digit MNC:
63 55 47 39 0
+-----------+-----------+-----------+-------------------------+
| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)
+-----------+-----------+-----------+-------------------------+
IMSI encoding for a 3-digit MNC:
63 55 47 39 35 0
+-----------+-----------+-----------+-------------------------+
| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)
+-----------+-----------+-----------+-------------------------+
Bits 63-56 of the IMSI are carried in octet number 1 of the octet
string and bits 7-0 are carried in octet number 8 of the octet string.
TmnxMobLiTargetType INTEGERimei(3) imsi(1) msisdn(2)
The data type TmnxMobLiTargetType describes the types of target in
Lawful Interception (LI).
TmnxMobMcc DisplayString (SIZE (3))The data type TmnxMobMcc describes the Mobile Country Code (MCC) of an
User Equipment (UE).
TmnxMobMccOrEmpty DisplayString (SIZE (0 | 3))The data type TmnxMobMccOrEmpty describes the Mobile Country Code
(MCC) of an User Equipment (UE).
TmnxMobMnc DisplayString (SIZE (2 | 3))The data type TmnxMobMnc describes the Mobile Network Code (MNC) of an
User Equipment (UE).
TmnxMobMncOrEmpty DisplayString (SIZE (0 | 2 | 3))The data type TmnxMobMncOrEmpty describes the Mobile Network Code
(MNC) of an User Equipment (UE).
TmnxMobMsisdn DisplayString (SIZE (0..15))The data type TmnxMobMsisdn describes the Mobile Subscriber Integrated
Services Digital Network (MSISDN) number of an User Equipment (UE).
TmnxMobNai DisplayString (SIZE (0..72))The data type TmnxMobNai describes the Network Address Identifier
(NAI) of an User Equipment (UE).
TmnxMobNode DisplayString (SIZE (0..30))The data type TmnxMobNode describes the name of a mobile gateway which
consists of Mobile Country Code (MCC), Mobile Network Code (MNC),
Region string, Group Id, Node Id.
A mobile gateway name can be described as follows:
<MCC>.<MNC>.<SGW|PGW>.<Region String>.<Group Id>.<Node Id>
MCC : 3 digits (000-999)
MNC : 2 or 3 digits
Application Type : SGW or PGW (3 characters)
Region String : 10 characters
Group Id : 3 characters
Node Id : 3 characters
TmnxMobPathMgmtState INTEGERdisabled(0) fault(3) idle(4) reqTimeOut(2) restart(5) up(1)
The data type TmnxMobPathMgmtState describes the state of a path for a
reference point. A value of 'reqTimeOut' indicates that the peer is
not replying to the Echo Request messages the SGW is sending out.
TmnxMobPdnGyChrgTriggerType INTEGERlocCellIdRecvd(22) locLacRecvd(21) locMccRecvd(18) locMncRecvd(19) locRacRecvd(20) locRecvd(2) medCompRecvd(23) partcNmbRecvd(24) qosDlyClsRecvd(6) qosGrtBtRtDllnkRecvd(17) qosGrtBtRtUplnkRecvd(16) qosMeanTrptRecvd(9) qosMxBtRtDllnkRecvd(11) qosMxBtRtUplnkRecvd(10) qosPeakThrptRecvd(7) qosPrcClsRecvd(8) qosRecvd(1) qosResBerRecvd(12) qosRlbClsRecvd(5) qosSduErrRatRecvd(13) qosTransDelayRecvd(14) qosTrfClsRecvd(4) qosTrfHndPriRecvd(15) ratRecvd(3) servCondRecvd(27) servNodeRecvd(28) sgsnIpAddrRecvd(0) thrldPartcNmbRecvd(25) usrCsgInfoRecvd(29) usrPartcTypeRecvd(26)
The data type TmnxMobPdnGyChrgTriggerType describes type of the
trigger activated by the Online Charging System (OCS).
sgsnIpAddrRecvd - Change in Serving GPRS Support Node (SGSN) IP
address
qosRecvd - Change in Quality of Service (QoS)
locRecvd - Location Change
ratRecvd - Router Advertisement Trigger (RAT) Change
qosTrfClsRecvd - Change in QoS Traffic class
qosRlbClsRecvd - Change in QoS Reliability class
qosDlyClsRecvd - Change in QoS Delay class
qosPeakThrptRecvd - Change in QoS Peak Throughput
qosPrcClsRecvd - Change in QoS Precedence class
qosMeanTrptRecvd - Change in QoS Mean Throughput
qosMxBtRtUplnkRecvd - Change in QoS MBR for Uplink
qosMxBtRtDllnkRecvd - Change in QoS MBR for Downlink
qosResBerRecvd - Change in QoS Residual Bit Error Rate (BER)
qosSduErrRatRecvd - Change in QoS Service Data Unit (SDU) Error
Ratio class
qosTransDelayRecvd - Change in QoS Transfer Delay
qosTrfHndPriRecvd - Change in QoS Traffic Handling Priority
qosGrtBtRtUplnkRecvd - Change in QoS Guaranteed Bit Rate (GBR) for
Uplink
qosGrtBtRtDllnkRecvd - Change in QoS GBR for Downlink
locMccRecvd - Change in Location Mobile Country Code (MCC)
locMncRecvd - Change in Location Mobile Network Code (MNC)
locRacRecvd - Change in Location Routing Area Code (RAC)
locLacRecvd - Change in Location Location Area Code (LAC)
locCellIdRecvd - Change in Location Cell ID
medCompRecvd - Change in Media Composition
partcNmbRecvd - Change in Participants' number
thrldPartcNmbRecvd - Change in Threshold of Participants' number
usrPartcTypeRecvd - Change in User Participating Type
servCondRecvd - Change in Service Condition
servNodeRecvd - Change in Service Node
usrCsgInfoRecvd - Change in User Closed Subscription Group (CSG)
InformationTmnxMobPdnRefPointType INTEGERgn(3) gp(5) s2a(4) s5(1) s8(2)
The data type TmnxMobPdnRefPointType describes the types of reference
point.
TmnxMobPdnSessionEvent INTEGERdlPktNotificationAck(13) dlPktNotificationFail(14) dlPktRecvIndication(12) eventMax(22) gtpCreateSessReq(1) gtpDeleteBearerResp(4) gtpDeleteSessReq(3) gtpModifyActiveToIdle(6) gtpModifyQosCmd(8) gtpResrcAllocCmd(7) gtpS1CreateIndirectTunnel(11) gtpUpdateBearerReq(2) gtpUpdateBearerResp(5) gtpX1eNodeBTeidUpdate(9) gtpX2SrcSgwDeleteSessReq(10) pcrfProvQosRules(17) pcrfSessEstResp(15) pcrfSessTerminateRsp(16) pmipSessDeleteReq(21) pmipSessDeleteRsp(20) pmipSessResp(18) pmipSessUpdate(19) sessionInvalid(0)
The data type TmnxMobPdnSessionEvent describes the feedback signaling
message (FSM) event of a Packet Data Network (PDN) session.
TmnxMobPdnSessionState INTEGERconnected(5) dlDelPending(7) dlHandover(10) idleMode(8) incomingHandover(11) init(1) invalid(0) outgoingHandover(12) pageMode(9) stateMax(13) ulDelPending(6) waitEnodebUpdate(4) waitPcrfResponse(2) waitPgwResponse(3)
The data type TmnxMobPdnSessionState describes the feedback signaling
message (FSM) state of a Packet Data Network (PDN) session.
TmnxMobPdnType INTEGERipv4(1) ipv4v6(3) ipv6(2)
The data type TmnxMobPdnType describes the type of a Packet Data
Network (PDN).
TmnxMobPeerType INTEGERhsgw(3) pgw(2) sgw(1)
The data type TmnxMobPeerType describes the type of the mobile gateway
peer as Serving Gateway (SGW), Packet Data Network Gateway (PGW) or
High Rate Packet Data (HRPD) Serving Gateway (HSGW).
TmnxMobPgwSigProtocol INTEGERgtp(1) pmip(2)
The data type TmnxMobPgwSigProtocol describes the signaling protocol
used on S5 or S8 reference point.
TmnxMobPresenceState INTEGERabsent(0) present(1)
The data type TmnxMobPresenceState describes the whether the given
field is present.
TmnxMobProfGbrRate Unsigned32 (0..100000)The data type TmnxMobProfGbrRate describes the Guaranteed Bit Rate
(GBR) value in kilobits per second(kbps).
TmnxMobProfIpTtl Unsigned32 (1..255)The data type TmnxMobProfIpTtl describes the Time-To-Live (TTL) value.
TmnxMobProfKeepAliveInterval Unsigned32 (0 | 60..180)The data type TmnxMobProfKeepAliveInterval describes the intervals
between heartbeat messages
TmnxMobProfKeepAliveResponse Unsigned32 (1..20)The data type TmnxMobProfKeepAliveResponse describes the keep-alive T3
response value in seconds.
TmnxMobProfKeepAliveRetryCount Unsigned32 (1..15)The data type TmnxMobProfKeepAliveRetryCount describes the keep-alive
retry count value.
TmnxMobProfKeepAliveTimeout Unsigned32 (0 | 60..180)The data type TmnxMobProfKeepAliveTimeout describes the keep-alive
timeout value in seconds.
TmnxMobProfMbrRate Unsigned32 (0..100000)The data type TmnxMobProfMbrRate describes the Maximum Bit Rate (MBR)
value in kilobits per second(kbps).
TmnxMobProfMsgReTxRetryCount Unsigned32 (1..8)The data type TmnxMobProfMsgReTxRetryCount describes the message
retransmit retry count value.
TmnxMobProfMsgReTxTimeout Unsigned32 (1..30)The data type TmnxMobProfMsgReTxTimeout describes the message
retransmit timeout value in seconds.
TmnxMobProfName TNamedItemThe data type TmnxMobProfName describes the name of a profile used by
mobile gateways.
TmnxMobProfNameOrEmpty TNamedItemOrEmptyThe data type TmnxMobProfNameOrEmpty describes the name of a profile
used by mobile gateways.
TmnxMobProfPolChargingMethod INTEGERboth(3) offline(2) online(1) profChargingMtd(0)
TmnxMobProfPolChargingMethod data type is an enumerated integer that
describes the Charging Method for the Policy and Charging Control
(PCC) rule. A variable of this type could be set to 'online' charging
method, 'offline' charging method or 'both'.
If the variable is set to 'profChargingMtd' the charging method is set
to 'offline' if 'tmnxMobProfPgwChrgOffLineState' is set to 'enabled',
the charging method is set to 'online' if 'tmnxMobProfPgwChrgGyState'
is set to 'enabled' and the charging method is set to 'both' if both
'tmnxMobProfPgwChrgOffLineState' and 'tmnxMobProfPgwChrgGyState' are
set to 'enabled'.
TmnxMobProfPolMeteringMethod INTEGERboth(3) timeBased(1) volBased(2)
TmnxMobProfPolMeteringMethod data type is an enumerated integer that
describes the Metering Method for the Policy and Charging Control
(PCC) rule.
TmnxMobProfPolReportingLevel INTEGERratingGrp(2) servId(1)
TmnxMobProfPolReportingLevel data type is an enumerated integer that
describes the Reporting level for the Policy and Charging Control
(PCC) rule.
TmnxMobQci Unsigned32 (0..9)The data type TmnxMobQci describes the QoS Class Identifier.
TmnxMobQciValue Unsigned32 (1..9)The data type TmnxMobQciValue describes the QoS Class Identifier (QCI)
value.
TmnxMobQciValueOrZero Unsigned32 (0..9)The data type TmnxMobQciValueOrZero describes the QoS Class Identifier
(QCI) value.
TmnxMobQueueLimit Unsigned32 (1000..12000)The data type TmnxMobQueueLimit describes the queue limit in bytes.
TmnxMobRatingGrpState INTEGERallowFlow(1) allowResRules(4) creditsToppedUp(7) dis1stPktTrigger(6) disallowFlow(2) iom1stPktTrigger(5) redWebPortal(3) waitForFpt(8)
The data type TmnxMobRatingGrpState describes the state of a rating
group.
allowFlow - Allow the traffic to flow disallowFlow - Disallow the
traffic to Flow redWebPortal - Redirect the traffic to web portal
allowResRules - Allow restricted rules iom1stPktTrigger - Get the
trigger from on IOM on arrival of 1st packet dis1stPktTrigger -
Disable 1st packet trigger and allow the traffic creditsToppedUp -
Credits topped up waitForFpt - Unblocked and waiting for First Packet
Trigger (FPT)
TmnxMobRfAcctLevel INTEGERpdnLevel(1) qciLevel(2)
TmnxMobRfAcctLevel data type is an enumerated integer that describes
the accounting level.
TmnxMobRtrAdvtInterval Unsigned32 (1..60)The data type TmnxMobRtrAdvtInterval describes the router
advertisement interval in minutes.
TmnxMobRtrAdvtLifeTime Unsigned32 (1..24)The data type TmnxMobRtrAdvtLifeTime describes the router
advertisement life time in hours.
TmnxMobSdf Unsigned32 (0..255)The data type TmnxMobSdf describes the number of Service Data Flows
(SDFs).
TmnxMobSdfFilter Unsigned32 (0..16)The data type TmnxMobSdfFilter describes a IP filter in a Service Data
Flow (SDF) or Traffic Flow Template (TFT).
TmnxMobSdfFilterDirection INTEGERbiDir(3) downLink(1) preRel7(0) upLink(2)
The data type TmnxMobSdfFilterDirection describes the direction on
which a Service Data Flow (SDF) filter rule is valid.
TmnxMobSdfFilterNum Unsigned32 (0..16)The data type TmnxMobSdfFilterNum describes the number of IP filters.
TmnxMobSdfFilterProtocol INTEGERactiveNet(107) ah(51) any(-1) any0hop(114) anyDFS(68) anyHostIntl(61) anyLocalNet(63) anyPEC(99) argus(13) aris(104) ax25(93) bbnRccMon(10) bna(49) brSatMon(76) cbt(7) cftp(62) chaos(16) compaqPeer(110) cphb(73) cpnx(72) crtp(126) crudp(127) dccp(33) dcnMeas(19) ddp(37) ddx(116) dgp(86) dsr(48) egp(8) eiGrp(88) emcon(14) encap(98) esp(50) etherIp(97) fc(133) fire(125) ggp(3) gmtp(100) gre(47) hip(139) hmp(20) iNlsp(52) iatp(117) icmp(1) idpr(35) idprCmtp(38) idrp(45) ifmp(101) igmp(2) igp(9) il(40) ip(4) ipComp(108) ipcv(71) ipip(94) iplt(129) ippc(67) ipv6(41) ipv6Frag(44) ipv6HopByOpOpt(0) ipv6Icmp(58) ipv6NoNxt(59) ipv6Opts(60) ipv6Route(43) ipxInIp(111) irdp(28) isis(124) isoIp(80) isoTp4(29) kryptolan(65) l2tp(115) larp(91) leaf1(25) leaf2(26) manet(138) meritInp(32) mfeNsp(31) micp(95) mobHeader(135) mobile(55) mplsInIp(137) mtp(92) mux(18) narp(54) netblt(30) nsfnetIgp(85) nvp2(11) ospfIgp(89) pc3(34) pgm(113) pim(103) pipe(131) pnni(102) prm(21) ptp(123) pup(12) pvp(75) qnx(106) rdp(27) rsvp(46) rsvpE2eIgnore(134) rvd(66) satExpak(64) satMon(69) sccSp(96) scps(105) sctp(132) sdrp(42) secureVmpt(82) shim6(140) skip(57) sm(122) smp(121) snp(109) spriteRpc(90) sps(130) srp(119) sscopmce(128) st(5) stp(118) sunNd(77) swipe(53) tcf(87) tcp(6) tlsp(56) tpplusplus(39) trunk1(23) trunk2(24) ttp(84) udp(17) udpLite(136) uti(120) vines(83) visa(70) vmtp(81) vrrp(112) wbExpak(79) wbMon(78) wsn(74) xnet(15) xnsIdp(22) xtp(36)
The data type TmnxMobSdfFilterProtocol describes IPv4 protocol or IPv6
next header on which Service Data Flow (SDF) filter matches.
TmnxMobSdfRuleName DisplayString (SIZE (1..64))The data type TmnxMobSdfRuleName describes the policy rule name of a
Service Data Flow (SDF).
TmnxMobServRefPointType INTEGERs2a(4) s5(1) s8(2)
The data type TmnxMobServRefPointType describes the types of reference
point.
TmnxMobServerState INTEGERdown(2) na(0) up(1)
The data type TmnxMobServerState describes the state of a server
connected with a mobile gateway.
TmnxMobService DisplayString (SIZE (0..80))The data type TmnxMobService describes the Service and Protocol
service names for 3GPP.
TmnxMobStaticPolPrecedence Unsigned32 (1..65536)The data type TmnxMobStaticPolPrecedence describes the precedence
value for a static policy configured in the system.
TmnxMobStaticPolPrecedenceOrZero Unsigned32 (0..65535)The data type TmnxMobStaticPolPrecedence describes the precedence
value for a static policy configured in the system.
TmnxMobUeId OCTET STRING (SIZE (8))The data type TmnxMobUeId describes the identity of an User Equipment.
TmnxMobUeId can be of the following types: International Mobile
Subscriber Identity (IMSI), International Mobile station Equipment
Identity (IMEI), Mobile Subscriber Integrated Services Digital network
Number (MSISDN). IMSI, IMEI, MSISDN are defined in 3GPP TS 23.003.
IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN).
IMEI is defined as a number consisting of up to 16 BCD digits. The
first 8 digits consists of Type Allocation Code (TAC). The next 6
digits consist of Serial Number (SNR) which could be followed by a
Check Digit (CD) or Spare Digit (SD) of size 1 digit or by a Software
Version Number (SVN) of size 2 digits.
MSISDN is defined as a number consisting of 9 to 15 BCD digits. MSISDN
consists of Country Code (CC) followed by National Destination Code
(NDC) and Subscriber Number (SN).
Bits 63-56 of the IMSI or IMEI or MSISDN are carried in octet number 1
of the octet string and bits 7-0 are carried in octet number 8 of the
octet string.
The internal representation of the IMSI is as follows:
Bits 63-62 are reserved.
Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.
Bits 59-0 hold the 15 IMSI BCD digits D1-15.
When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.
IMSI encoding for a 2-digit MNC:
63 55 47 39 0
+-----------+-----------+-----------+-------------------------+
| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)
+-----------+-----------+-----------+-------------------------+
IMSI encoding for a 3-digit MNC:
63 55 47 39 35 0
+-----------+-----------+-----------+-------------------------+
| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)
+-----------+-----------+-----------+-------------------------+
The internal representation of the IMEI and MSISDN is as follows:
IMEI encoding:
63 55 31 7 0
+-----------+-----------+----------------------+-------+
| TAC | SNR | SNV |
|N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|
+-----------+-----------+-----------+------------------+
MSISDN encoding:
63 55 31 7 0
+-----------+-----------+----------------------+-------+
| CC | NDC | SN |
|N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|
+-----------+-----------+-----------+------------------+
When the total number of digits in the IMEI or MSISDN is less than 15,
the nibble 0x0 is used a filler.
In each byte both nibbles are swapped and it is stored as shown in the
above format. For example, in the format N3 & N4 present the nibble
number 3 and 4 respectively and they are stored in reverse order.
When the total number of digits are odd in IMEI and MSISDB, the last
digit will be paired with nibble 0xf.
TmnxMobUeIdType INTEGERimei(1) imsi(0) msisdn(2)
The data type TmnxMobUeIdType describes the types of identification
for User Equipment (UE).
TmnxMobUeRat INTEGERehrpd(7) eutran(6) gan(4) geran(2) hrpd(8) hspa(5) oneXrtt(9) umb(10) utran(1) wlan(3)
The data type TmnxMobUeRat describes the Radio Access Type (RAT) of an
User Equipment (UE).
TmnxMobUeRoamStatusType INTEGERhome(1) none(0) roaming(2) visiting(3)
The data type TmnxMobUeRoamStatusType specifies the roaming status
type for user range.
TmnxMobUeState INTEGERactive(2) ddnDamp(6) idle(1) init(4) paging(3) suspend(5)
The data type TmnxMobUeState describes the state of an User Equipment
(UE).
TmnxMobUeStrPrefix DisplayString (SIZE (4..15))The data type TmnxMobUeStrPrefix describes the prefix for
International Mobile Subscriber Identity (IMSI) or Mobile Subscriber
Integrated Services Digital Network (MSISDN) of an User Equipment
(UE).
TmnxMobUeSubType INTEGERhomer(1) roamer(2) visitor(3)
The data type TmnxMobUeSubType describes the subscription type of User
Equipment (UE).