TIMETRA-OAM-TEST-MIB
Nokia (formerly 'Alcatel-Lucent')This document is the SNMP MIB module to manage and provision the
following Nokia SROS functionality:
1. Most OAM on-demand tests, including ping and traceroute.
2. All Service Assurance Agent (SAA) tests.
3. Background LDP tree trace.
4. BFD on LSP background tests (RFC 5884).
5. Interface Ping: background router interface ICMP ping,
controlling the interface's operational state.
6. Link Measurement: delay measurement on an Ethernet link,
influencing routing.
7. LAG Measurement: delay, IFDV, and loss measurements on LAG member
ports.
8. Counts of OAM packets sent and received, per packet type.
9. Statistics and limits for configured OAM transmit capacity (in
pps).
10. Counts and limits for the number of OAM sessions configured (per
session type).
11. A pool of UDP listen ports, reserved for OAM applications.
12. Related functionality.
Other OAM MIBs:
1. IEEE8021-CFM-MIB, TIMETRA-IEEE8021-CFM-MIB: OAM Eth-CFM on-demand
tests.
2. TIMETRA-OAM-PM-MIB: OAM Performance Monitoring (OAM-PM; MEF-35).
3. TIMETRA-OAM-SERV-ACTIV-TEST-MIB: Y.1564 tests.
4. TIMETRA-TWAMP-MIB: Two-Way Active Measurement Protocol (RFC 5357).
Copyright 2003-2024 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification.snmptranslate -m TIMETRA-OAM-TEST-MIB -Tpsnmpwalk -v2c -c <community> -m TIMETRA-OAM-TEST-MIB <host> 1.3.6.1.4.1.6527.1.1.3.11Imports
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItimetraOamTestMIBModule | 1.3.6.1.4.1.6527.1.1.3.11 | |||
identity This document is the SNMP MIB module to manage and provision the
following Nokia SROS functionality:
1. Most OAM on-demand tests, including ping and traceroute.
2. All Service Assurance Agent (SAA) tests.
3. Background LDP tree trace.
4. BFD on LSP background tests (RFC 5884).
5. Interface Ping: background router interface ICMP ping,
controlling the interface's operational state.
6. Link Measurement: delay measurement on an Ethernet link,
influencing routing.
7. LAG Measurement: delay, IFDV, and loss measurements on LAG member
ports.
8. Counts of OAM packets sent and received, per packet type.
9. Statistics and limits for configured OAM transmit capacity (in
pps).
10. Counts and limits for the number of OAM sessions configured (per
session type).
11. A pool of UDP listen ports, reserved for OAM applications.
12. Related functionality.
Other OAM MIBs:
1. IEEE8021-CFM-MIB, TIMETRA-IEEE8021-CFM-MIB: OAM Eth-CFM on-demand
tests.
2. TIMETRA-OAM-PM-MIB: OAM Performance Monitoring (OAM-PM; MEF-35).
3. TIMETRA-OAM-SERV-ACTIV-TEST-MIB: Y.1564 tests.
4. TIMETRA-TWAMP-MIB: Two-Way Active Measurement Protocol (RFC 5357).
Copyright 2003-2024 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification. | ||||
| NtmnxOamTestConformance | 1.3.6.1.4.1.6527.3.1.1.11 | |||
| NtmnxOamPingConformance | 1.3.6.1.4.1.6527.3.1.1.11.1 | |||
| NtmnxOamPingCompliances | 1.3.6.1.4.1.6527.3.1.1.11.1.1 | |||
| MtmnxOamPing7450V4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.4 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia 7450 ESS series systems release 4.0. | ||||
| MtmnxOamPing7750V4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.5 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia SROS series systems release 4.0. | ||||
| MtmnxOamPing7450V5v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.6 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia 7450 ESS series systems release 5.0. | ||||
| MtmnxOamPing7750V5v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.7 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia SROS series systems release 5.0.
| ||||
| MtmnxOamPing7450V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.8 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia 7450 ESS series systems release 6.0. | ||||
| MtmnxOamPing7750V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.9 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia SROS series systems release 6.0.
| ||||
| MtmnxOamPing7450V7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.10 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia 7450 ESS series systems release 7.0. | ||||
| MtmnxOamPing7750V7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.11 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia 7750 and 7710 SR series systems release 7.0.
| ||||
| MtmnxOamPing7450V8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.12 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia 7450 ESS series systems release 8.0. | ||||
| MtmnxOamPing77x0V8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.13 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia 7750 and 7710 SR series systems release 8.0.
| ||||
| MtmnxOamPing7xx0V9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.14 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia SROS series systems, release 9.0.
| ||||
| MtmnxOamPing7xx0V10v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.15 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia SROS series systems, release 10.0.
| ||||
| MtmnxOamPing7xx0V11v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.16 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia SROS series systems, release 11.0.
| ||||
| MtmnxOamPing7xx0V12v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.17 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM ping tests on Nokia SROS series systems, release 12.0.
| ||||
| MtmnxOamPing7xx0V13v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.18 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 13.0.
| ||||
| MtmnxOamPing7xx0V14v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.19 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 14.0.
| ||||
| MtmnxOamPing7xx0V15v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.20 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 15.0.
| ||||
| MtmnxOamPing7xx0V16v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.21 | obsolete | ||
compliance · obsolete The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 16.0.
| ||||
| MtmnxOamPing7xx0V19v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.22 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 19.0.
| ||||
| MtmnxOamPing7xx0V20v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.23 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 20.
| ||||
| MtmnxOamPing7xx0V22v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.24 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 22.
| ||||
| MtmnxOamPing7xx0V23v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.25 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 23.x.
| ||||
| MtmnxOamPing7xx0V24v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.26 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 24. | ||||
| MtmnxOamPing7xx0V25v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.1.1.27 | |||
compliance · current The compliance statement for OAM ping OBJECT-GROUPs added in Nokia SROS series systems, release 25.
| ||||
| NtmnxOamPingGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.2 | |||
| GtmnxOamMacPingL2MapGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.3 | obsolete | ||
group · obsolete The group of optional objects to report OAM Mac Ping layer-2 mapping information returned in response to OAM Mac Ping tests on Nokia SROS series systems. | ||||
| GtmnxOamAtmPingR2r1Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.8 | obsolete | ||
group · obsolete The group of objects supporting management of OAM ATM Ping tests on Nokia SROS series systems. | ||||
| GtmnxOamMacPingV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.14 | obsolete | ||
group · obsolete The group of objects supporting management of OAM Mac Ping tests on Nokia SROS series systems release 4.0.
| ||||
| GtmnxOamVccvPingGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.15 | obsolete | ||
group · obsolete The group of objects supporting management of OAM VCCV Ping tests on Nokia SROS series systems. | ||||
| GtmnxOamPingGeneralV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.16 | obsolete | ||
group · obsolete The group of objects supporting management of OAM ping tests general capabilities on Nokia SROS series systems 4.0 release.
| ||||
| GtmnxOamLspPingV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.17 | obsolete | ||
group · obsolete The group of objects supporting management of OAM LSP Ping tests on Nokia SROS series systems 4.0 release. | ||||
| GtmnxOamVprnPingV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.19 | |||
group · current The group of objects supporting management of OAM VPRN Ping tests on Nokia SROS series systems 4.0 release. | ||||
| GtmnxOamMfibPingV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.20 | obsolete | ||
group · obsolete The group of objects supporting management of OAM MFIB Ping tests on Nokia SROS series systems release 4.0. | ||||
| GtmnxOamCpePingV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.21 | |||
group · current The group of objects supporting management of OAM CPE Ping tests on Nokia SROS series systems release 4.0. | ||||
| GtmnxOamMRInfoV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.22 | |||
group · current The group of objects supporting management of OAM Multicast Router
Information ('mrInfo') tests on Nokia SROS series systems release 4.0.
| ||||
| GtmnxOamIcmpPingGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.23 | |||
group · current The group of objects supporting management of OAM ICMP Ping tests on Nokia SROS series systems. | ||||
| GtmnxOamPingObsoleteV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.24 | |||
group · current The group of objects supporting management of OAM ICMP Ping tests on Nokia SROS series systems that were made obsolete in release 4.0.
| ||||
| GtmnxOamPingNotificationV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.25 | obsolete | ||
group · obsolete The group of notifications supporting the OAM ping feature on Nokia SROS series systems release 4.0. | ||||
| GtmnxOamPingNotificationObsoleteV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.26 | |||
group · current The group of notifications supporting the OAM ping feature on Nokia SROS series systems release 4.0. | ||||
| GtmnxOamLspPingV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.27 | obsolete | ||
group · obsolete The group of objects supporting management of OAM LSP Ping tests on Nokia SROS series systems 5.0 release.
| ||||
| GtmnxOamVccvPingV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.28 | |||
group · current The group of objects supporting management of OAM VCCV Ping tests on Nokia SROS series systems 5.0 release. | ||||
| GtmnxOamAncpTestV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.29 | |||
group · current The group of objects supporting management of OAM ANCP tests on Nokia SROS series systems 5.0 release. | ||||
| GtmnxOamPingNotificationV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.30 | obsolete | ||
group · obsolete The group of notifications supporting the OAM ping feature on Nokia SROS series systems release 5.0. | ||||
| GtmnxOamMfibPingV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.31 | |||
group · current The group of objects supporting management of OAM MFIB Ping tests on Nokia SROS series systems release 6.0. | ||||
| GtmnxOamPingGeneralV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.32 | obsolete | ||
group · obsolete The group of objects supporting management of OAM ping tests general capabilities on Nokia SROS series systems 6.0 release.
| ||||
| GtmnxOamP2mpLspPingGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.33 | |||
group · current The group of objects supporting management of P2MP LSP Ping tests on Nokia SROS series systems 7.0 release. | ||||
| GtmnxOamLspPingV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.34 | obsolete | ||
group · obsolete The group of objects supporting management of OAM LSP Ping tests on Nokia SROS series systems 6.0 release.
| ||||
| GtmnxOamPingGeneralV7v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.35 | obsolete | ||
group · obsolete The group of objects supporting management of OAM ping tests general capabilities on Nokia SROS series systems 7.0 release.
| ||||
| GtmnxOamPingNotificationV7v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.36 | |||
group · current The group of notifications supporting the OAM ping feature on Nokia SROS series systems release 7.0. | ||||
| GtmnxOamPingObsoleteV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.37 | |||
group · current The group of objects supporting management of OAM ping operations on Nokia SR series systems that were made obsolete in release 6.0. | ||||
| GtmnxOamPingObsoleteV6v1Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.38 | |||
group · current The group of objects supporting management of OAM ping operations on Nokia SR series systems that were made obsolete in release 6.1. | ||||
| GtmnxOamEthCfmPingV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.39 | |||
group · current The group of objects supporting management of OAM Ethernet CFM Ping tests on Nokia SROS series systems 8.0 release. | ||||
| GtmnxOamP2mpLspPingV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.40 | |||
group · current The group of objects supporting management of OAM P2MP LSP Ping tests on Nokia SROS series systems 8.0 release.
| ||||
| GtmnxOamPingGeneralV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.41 | obsolete | ||
group · obsolete The group of objects supporting management of OAM ping tests general capabilities on Nokia SROS series systems 8.0 release.
| ||||
| GtmnxOamPingObsoleteV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.42 | |||
group · current The group of objects supporting management of OAM ping operations on Nokia SR series systems that were made obsolete in release 8.0. | ||||
| GtmnxOamVccvPingV9v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.43 | |||
group · current The group of additional objects supporting management of OAM VCCV Ping tests on Nokia SROS series systems 9.0 release. | ||||
| GtmnxOamPingCtlV10v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.44 | |||
group · current The group of additional objects supporting management of OAM ping tests on Nokia SROS series systems, release 10.0.
| ||||
| GtmnxOamMobilePingGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.45 | obsolete | ||
group · obsolete The group of objects supporting management of OAM mobile gateway ping tests on Nokia 7x50 SR series systems. | ||||
| GtmnxOamPingObsoleteV10v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.46 | |||
group · current The group of objects supporting management of OAM ping operations made obsolete in SROS Release 10.0 R1.
| ||||
| GtmnxOamPingGeneralV10v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.47 | |||
group · current The group of objects supporting management of OAM ping tests general capabilities on SROS release 10.0, and still supported in the latest SROS release.
| ||||
| GtmnxOamP2mpLspPingV10v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.48 | |||
group · current The group of objects supporting management of OAM P2MP LSP Ping tests on Nokia SROS series systems 10.0 release. | ||||
| GtmnxOamPingObsoleteV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.49 | |||
group · current The group of objects supporting management of OAM ping operations made obsolete in SROS Release 11.0 R1. | ||||
| GtmnxOamMacPingCtlV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.50 | |||
group · current The group of objects supporting configuration of OAM Mac Ping tests on Nokia SROS series systems release 11.0.
| ||||
| GtmnxOamMacPingHistoryV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.51 | |||
group · current The group of objects supporting reporting results of OAM Mac Ping tests on Nokia SROS series systems release 11.0.
| ||||
| GtmnxOamLspPingV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.52 | |||
group · current The group of objects supporting management of OAM LSP Ping tests on Nokia SROS systems, release 11.0.
| ||||
| GtmnxOamVccvPingV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.53 | |||
group · current The group of additional objects supporting management of OAM VCCV Ping tests on Nokia SROS series systems running release 11.0. | ||||
| GtmnxOamPingV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.54 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 11.0. | ||||
| GtmnxOamPingV12v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.55 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 12.0.
| ||||
| GtmnxOamPingV13v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.56 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 13.0.
| ||||
| GtmnxOamPingObsoleteV14v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.57 | |||
group · current The group of objects supporting management of OAM ping operations on Nokia SR series systems that were made obsolete in SROS release 14.0. | ||||
| GtmnxOamPingV14v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.58 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 14.0. | ||||
| GtmnxOamPingV15v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.59 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 15.0.
| ||||
| GtmnxOamPingV16v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.60 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 16.0. | ||||
| GtmnxOamPingObsoletedV16v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.61 | |||
group · current The group of objects supporting management of OAM gtp ping operations on Nokia SR series systems that were made obsolete in SROS release 16.0.
| ||||
| GtmnxOamMobilePingV16v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.62 | |||
group · current The group of objects supporting management of OAM mobile gateway ping tests on Nokia 7x50 SR series systems. | ||||
| NtmnxOamPingV19v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.2.63 | |||
| GtmnxOamPingV19v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.63.1 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 19. | ||||
| NtmnxOamPingV20v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.2.64 | |||
| GtmnxOamBierPingV20v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.64.1 | |||
group · current The group of additional objects supporting management of OAM BIER Ping tests on Nokia SROS series systems running release 20.
| ||||
| NtmnxOamPingV22v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.2.65 | |||
| GtmnxOamPingV22v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.65.1 | |||
group · current The group of additional objects supporting management of OAM Ping tests on Nokia SROS series systems running release 22.
| ||||
| NtmnxOamPingV23v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.2.66 | |||
| GtmnxOamLspPingV23v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.66.1 | |||
group · current The group of additional objects supporting management of OAM LSP ping tests on Nokia SROS series systems running release 23.
| ||||
| GtmnxOamPingObsoletedV23v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.2.66.2 | |||
group · current The group of objects supporting management of OAM ATM Ping tests operations on Nokia SR series systems that were made obsolete in release 23. | ||||
| GtmnxOamIcmpPingV23v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.66.3 | |||
group · current The group of additional objects supporting management of OAM ICMP ping tests on Nokia SROS series systems running release 23. | ||||
| GtmnxOamP2mpLspPingV23v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.66.4 | |||
group · current The group of additional objects supporting management of P2MP LSP ping tests on Nokia SROS series systems running release 23. | ||||
| GtmnxOamIcmpPingCandV23v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.66.5 | |||
group · current The group of additional objects supporting management of OAM ICMP ping SRv6 policy candidate path tests on Nokia SROS series systems running release 23. | ||||
| GtmnxOamVccvPingV23v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.66.6 | |||
group · current The group of additional objects supporting management of OAM VCCV ping tests on Nokia SROS series systems running release 23. | ||||
| NtmnxOamPingV24v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.2.67 | |||
| GtmnxOamEthCfmPingV24v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.67.1 | |||
group · current The group of additional objects supporting management of OAM Eth CFM ping tests on Nokia SROS series systems running release 24. | ||||
| NtmnxOamPingV25v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.2.68 | |||
| GtmnxOamLagMeasV25v0ObjGroup | 1.3.6.1.4.1.6527.3.1.1.11.1.2.68.1 | |||
group · current The group of additional objects supporting management of OAM LAG Measurement tests on Nokia SROS series systems running release 25. | ||||
| NtmnxOamIfPingObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.3 | |||
| GtmnxOamIfPingV20v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.3.1 | |||
group · current The group of objects supporting management of the operational status of an IP interface by means of ICMP in Nokia SROS series systems running release 20.
| ||||
| NtmnxOamLnkMeasObjsGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.4 | |||
| GtmnxOamLnkMeasV21v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.4.1 | |||
group · current The group of objects supporting the OAM Link Measurement functionality on Nokia SROS Release 21.0.
| ||||
| GtmnxOamLnkMeasV22v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.4.2 | |||
group · current The group of objects adding STAMP performance measurement to OAM Link Measurement functionality on Nokia SROS Release 22.0.
| ||||
| NtmnxOamLagMeasObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.1.5 | |||
| GtmnxOamLagMeasInitV24v0Group | 1.3.6.1.4.1.6527.3.1.1.11.1.5.1 | |||
group · current The group of objects supporting the initial release of OAM LAG Measurement functionality on Nokia SROS Release 24.
| ||||
| NtmnxOamTraceRouteConformance | 1.3.6.1.4.1.6527.3.1.1.11.2 | |||
| NtmnxOamTrCompliances | 1.3.6.1.4.1.6527.3.1.1.11.2.1 | |||
| MtmnxOamTr7450V4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.3 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia 7450 ESS series systems. | ||||
| MtmnxOamTr7750V4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.4 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia SROS series systems. | ||||
| MtmnxOamTr7450V5v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.5 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia 7450 ESS series systems. | ||||
| MtmnxOamTr7750V5v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.6 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia SROS series systems. | ||||
| MtmnxOamTr7450V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.7 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia 7450 ESS series systems. | ||||
| MtmnxOamTr77x0V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.8 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia 7710/7750 SR series systems. | ||||
| MtmnxOamTr7450V7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.9 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia 7450 ESS series systems. | ||||
| MtmnxOamTr77x0V7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.10 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia 7710/7750 SR series systems. | ||||
| MtmnxOamTr7xx0V8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.11 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia 7450/7710/7750 series systems.
| ||||
| MtmnxOamTr7xx0V9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.12 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM Trace Route tests on Nokia SROS series systems, release 9.0.
| ||||
| MtmnxOamTr7xx0V11v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.13 | |||
compliance · current The compliance statement for management of OAM Trace Route tests on Nokia SROS series systems, release 11.0.
| ||||
| MtmnxOamTr7xx0V12v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.14 | |||
compliance · current The incremental module compliance statement for management of OAM Trace Route tests on Nokia SROS series systems, release 12.0. The corresponding base module compliance statement is tmnxOamTr7xx0V11v0Compliance.
| ||||
| MtmnxOamTr7xx0V13v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.15 | |||
compliance · current The incremental module compliance statement for management of OAM Trace Route tests on Nokia SROS series systems, release 13.0.
| ||||
| MtmnxOamTr7xx0V15v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.17 | |||
compliance · current The incremental module compliance statement for management of OAM Trace Route tests on Nokia SROS series systems, release 15.0.
| ||||
| MtmnxOamTr7xx0V19v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.18 | |||
compliance · current The compliance statement for OAM trace OBJECT-GROUPs added in Nokia SROS series systems, release 19.0.
| ||||
| MtmnxOamTr7xx0V20v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.19 | |||
compliance · current The compliance statement for OAM trace OBJECT-GROUPs added in Nokia SROS series systems, release 20.
| ||||
| MtmnxOamTr7xx0V21v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.20 | |||
compliance · current The compliance statement for OAM trace OBJECT-GROUPs added in Nokia SROS series systems, release 21.
| ||||
| MtmnxOamTr7xx0V22v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.21 | |||
compliance · current The compliance statement for OAM trace OBJECT-GROUPs added in Nokia SROS series systems, release 22. | ||||
| MtmnxOamTr7xx0V23v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.2.1.22 | |||
compliance · current The compliance statement for OAM trace OBJECT-GROUPs added in Nokia SROS series systems, release 23. | ||||
| NtmnxOamTrGroups | 1.3.6.1.4.1.6527.3.1.1.11.2.2 | |||
| GtmnxOamMacTrV3v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.10 | |||
group · current The group of objects supporting management of OAM MAC Trace Route tests on Nokia SROS series systems.
| ||||
| GtmnxOamTrObsoleteV3v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.11 | |||
group · current The group of objects supporting management of OAM Trace Route tests that became obsolete in the 3.0 release. | ||||
| GtmnxOamTrGeneralV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.12 | obsolete | ||
group · obsolete The group of objects supporting management of OAM Trace Route test general capabilities on Nokia SROS series systems 4.0R1 release.
| ||||
| GtmnxOamTrHopsV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.13 | |||
group · current The group of optional objects to report OAM Trace Route Hops returned in response to OAM Trace Route tests on Nokia 7x50 SR series systems 4.0R1.
| ||||
| GtmnxOamLspTrV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.14 | obsolete | ||
group · obsolete The group of objects supporting management of OAM LSP Trace Route tests on Nokia SROS series systems 4.0 release.
| ||||
| GtmnxOamVprnTrV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.15 | obsolete | ||
group · obsolete The group of objects supporting management of OAM VPRN Trace Route tests on Nokia SROS series systems release 4.0.
| ||||
| GtmnxOamMcastTrV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.16 | |||
group · current The group of objects supporting management of OAM Multicast Trace Route tests on Nokia SROS series systems release 4.0.
| ||||
| GtmnxOamTrObsoleteV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.17 | |||
group · current The group of objects supporting management of OAM trace route tests on Nokia SROS series systems that were made obsolete in release 4.0.
| ||||
| GtmnxOamTrNotificationV4v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.18 | obsolete | ||
group · obsolete The group of notifications supporting the OAM Trace Route test feature on Nokia SROS series systems release 4.0. | ||||
| GtmnxOamLspTrV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.19 | obsolete | ||
group · obsolete The group of objects supporting management of OAM LSP Trace Route tests on Nokia SROS series systems 5.0 release.
| ||||
| GtmnxOamTrObsoleteV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.20 | |||
group · current The group of objects supporting management of OAM Trace tests on Nokia SROS series systems that were made obsolete in release 5.0.
| ||||
| GtmnxOamTrGeneralV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.21 | obsolete | ||
group · obsolete The group of objects supporting management of OAM Trace Route test general capabilities on Nokia SROS series systems 5.0 release.
| ||||
| GtmnxOamTrNotificationV5v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.22 | |||
group · current The group of notifications supporting the OAM Trace Route test feature on Nokia SROS series systems release 5.0. | ||||
| GtmnxOamVccvTrV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.23 | |||
group · current The group of objects supporting management of OAM VCCV Trace Route test general capabilities on Nokia SROS series systems 6.0 release. | ||||
| GtmnxOamVprnTrObsoleteV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.24 | |||
group · current The group of objects supporting management of OAM VPRN Trace Route tests on Nokia SROS series systems that were made obsolete in release 6.0.
| ||||
| GtmnxOamVprnTrV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.25 | |||
group · current The group of objects supporting management of OAM VPRN Trace Route tests on Nokia SROS series systems release 6.0.
| ||||
| GtmnxOamP2mpLspTraceGroup | 1.3.6.1.4.1.6527.3.1.1.11.2.2.26 | |||
group · current The group of objects supporting management of OAM P2MP LSP Trace Route tests on Nokia SROS series systems release 7.0.
| ||||
| GtmnxOamTrGeneralV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.27 | obsolete | ||
group · obsolete The group of objects supporting management of OAM Trace Route test general capabilities on Nokia SROS series systems 6.0 release.
| ||||
| GtmnxOamTrObsoleteV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.28 | |||
group · current The group of objects supporting management of OAM trace route operations on Nokia SR series systems that were made obsolete in release 6.0. Please see tmnxOamVprnTrObsoleteV6v0Group for additional obsoleted objects. | ||||
| GtmnxOamTrGeneralV7v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.29 | |||
group · current The group of objects supporting management of OAM Trace Route test general capabilities on Nokia SROS series systems 7.0 release, and still supported in the latest SROS release.
| ||||
| GtmnxOamEthCfmTrV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.30 | |||
group · current The group of objects supporting management of OAM Ethernet CFM trace route tests on Nokia SROS series systems 8.0 release. | ||||
| GtmnxOamLspTrV6v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.31 | |||
group · current The group of objects supporting management of OAM LSP Trace Route tests on Nokia SROS series systems 6.0 release.
| ||||
| GtmnxOamTrGeneralV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.32 | |||
group · current The group of objects supporting management of OAM Trace Route test general capabilities on Nokia SROS series systems 8.0 release. | ||||
| GtmnxOamTrNotificationV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.33 | |||
group · current The group of notifications supporting the OAM Trace Route test feature on Nokia SROS series systems release 8.0. | ||||
| GtmnxOamVccvTrV9v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.34 | |||
group · current The group of additional objects supporting management of OAM VCCV Trace Route test general capabilities on Nokia SROS series 9.0 release.
| ||||
| GtmnxOamLTtraceV9v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.35 | |||
group · current The group of additional objects supporting management of OAM LDP Tree Discovery capabilities on Nokia SROS series 9.0 release. | ||||
| GtmnxOamTrGeneralV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.36 | |||
group · current The group of additional objects supporting management of OAM Trace Route tests on Nokia SROS series systems, release 11.0.
| ||||
| GtmnxOamVccvTrV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.37 | |||
group · current The group of additional objects supporting management of OAM VCCV trace route tests on Nokia SROS series systems running release 11.0. | ||||
| GtmnxOamTrV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.38 | |||
group · current The group of additional objects supporting management of OAM trace route tests on Nokia SROS series systems running release 11.0. | ||||
| GtmnxOamTrV12v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.39 | |||
group · current The group of additional objects supporting management of OAM trace route tests on Nokia SROS series systems running release 12.0.
| ||||
| GtmnxOamTrObsoleteV13v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.40 | |||
group · current The group of objects supporting management of OAM trace route operations on Nokia SR series systems that were made obsolete in release 13.0. | ||||
| GtmnxOamTrV13v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.41 | |||
group · current The group of additional objects supporting management of OAM trace route tests on Nokia SROS series systems running release 13.0. | ||||
| GtmnxOamTrObsoleteV14v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.42 | |||
group · current The group of objects supporting management of OAM trace route operations on Nokia SR series systems that were made obsolete in SROS release 14.0. | ||||
| GtmnxOamTrV15v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.44 | |||
group · current The group of additional objects supporting management of OAM trace route tests on Nokia SROS series systems running release 15.0.
| ||||
| GtmnxOamTrV16v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.45 | |||
group · current The group of additional objects supporting management of OAM trace route tests on Nokia SROS series systems running release 16.0. | ||||
| NtmnxOamTrV19v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.2.2.46 | |||
| GtmnxOamTrV19v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.46.1 | |||
group · current The group of additional objects supporting management of OAM Trace tests on Nokia SROS series systems running release 19. | ||||
| NtmnxOamTrV20v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.2.2.47 | |||
| GtmnxOamBierTrV20v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.47.1 | |||
group · current The group of additional objects supporting management of OAM BIER Trace tests on Nokia SROS series systems running release 20.
| ||||
| NtmnxOamTrV21v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.2.2.48 | |||
| GtmnxOamIcmpTrV21v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.48.1 | |||
group · current The group of additional objects supporting management of traceroute tests on Nokia SROS series systems running release 21. | ||||
| NtmnxOamTrV22v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.2.2.49 | |||
| GtmnxOamLspTrV22v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.49.1 | |||
group · current The group of additional objects supporting management of 'lspTraceRoute' tests on Nokia SROS series systems running release 22.
| ||||
| GtmnxOamIcmpTrV22v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.49.2 | |||
group · current The group of additional objects supporting management of 'icmpTraceRoute' tests on Nokia SROS series systems running release 22.
| ||||
| NtmnxOamTrV23v0ObjGroups | 1.3.6.1.4.1.6527.3.1.1.11.2.2.50 | |||
| GtmnxOamIcmpTrV23v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.50.1 | |||
group · current The group of additional objects supporting management of 'icmpTraceRoute' tests on Nokia SROS series systems running release 23. | ||||
| GtmnxOamLspTrV23v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.50.2 | |||
group · current The group of additional objects supporting management of 'lspTraceRoute' tests on Nokia SROS series systems running release 23.
| ||||
| GtmnxOamIcmpTrCandV23v0Group | 1.3.6.1.4.1.6527.3.1.1.11.2.2.50.3 | |||
group · current The group of additional objects supporting management of OAM ICMP traceroute SRv6 policy candidate path tests on Nokia SROS series systems running release 23. | ||||
| NtmnxOamSaaConformance | 1.3.6.1.4.1.6527.3.1.1.11.3 | |||
| NtmnxOamSaaCompliances | 1.3.6.1.4.1.6527.3.1.1.11.3.1 | |||
| MtmnxOamSaaV3v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.3.1.1 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM SAA tests on Nokia SROS series systems. | ||||
| MtmnxOamSaaV7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.3.1.2 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM SAA tests on Nokia SROS series systems. | ||||
| MtmnxOamSaaV8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.3.1.3 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM SAA tests on Nokia SROS series systems. | ||||
| MtmnxOamSaaV10v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.3.1.4 | |||
compliance · current The compliance statement for management of OAM SAA tests on Nokia SROS series systems. | ||||
| NtmnxOamSaaGroups | 1.3.6.1.4.1.6527.3.1.1.11.3.2 | |||
| GtmnxOamSaaGeneralV3v0Group | 1.3.6.1.4.1.6527.3.1.1.11.3.2.1 | obsolete | ||
group · obsolete The group of objects supporting management of OAM SAA test general capabilities on Nokia SROS series systems. | ||||
| GtmnxOamSaaThresholdV3v0Group | 1.3.6.1.4.1.6527.3.1.1.11.3.2.2 | |||
group · current The group of objects supporting management of OAM Trace Route SAA test thresholds on Nokia SROS series systems 3.0R1. | ||||
| GtmnxOamSaaNotificationV3v0Group | 1.3.6.1.4.1.6527.3.1.1.11.3.2.3 | |||
group · current The group of notifications supporting the OAM Trace Route test feature on Nokia SROS series systems.
| ||||
| GtmnxOamSaaGeneralV7v0Group | 1.3.6.1.4.1.6527.3.1.1.11.3.2.4 | |||
group · current The group of objects supporting management of OAM SAA test general capabilities on Nokia SROS series systems 7.0 release, and still supported in the latest SROS release. | ||||
| GtmnxOamSaaGeneralV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.3.2.5 | |||
group · current The group of additional objects supporting management of OAM SAA test general capabilities on Nokia SROS series systems 8.0 release.
| ||||
| GtmnxOamSaaGeneralV10v0Group | 1.3.6.1.4.1.6527.3.1.1.11.3.2.6 | |||
group · current The group of additional objects supporting management of OAM SAA test general capabilities on Nokia SROS Release 10.0 systems. | ||||
| GtmnxOamSaaObsoleteV14v0Group | 1.3.6.1.4.1.6527.3.1.1.11.3.2.7 | |||
group · current The group of objects supporting management of OAM SAA operations on Nokia SR series systems that were made obsolete in SROS release 14.0.
| ||||
| NtmnxOamMobGatewayConformance | 1.3.6.1.4.1.6527.3.1.1.11.4 | |||
| NtmnxOamGeneralConformance | 1.3.6.1.4.1.6527.3.1.1.11.5 | |||
| NtmnxOamGeneralCompliances | 1.3.6.1.4.1.6527.3.1.1.11.5.1 | |||
| MtmnxOamGeneralV8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.5.1.1 | obsolete | ||
compliance · obsolete The compliance statement for management of OAM general capabilities on Nokia SROS series systems for Release 8.0.
| ||||
| MtmnxOamGeneralV10v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.5.1.2 | |||
compliance · current The compliance statement for management of OAM general capabilities on Nokia SROS series systems for Release 10.0. | ||||
| MtmnxOamGeneralV11v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.5.1.3 | |||
compliance · current The compliance statement for management of OAM general capabilities added in Nokia SROS series systems for Release 11.0.
| ||||
| MtmnxOamGeneralV14v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.5.1.6 | |||
compliance · current The compliance statement for management of OAM general capabilities added in Nokia SROS series systems for Release 14.0.
| ||||
| MtmnxOamGeneralV19v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.5.1.9 | |||
compliance · current The compliance statement for management of OAM general capabilities added in Nokia SROS series systems for Release 19.
| ||||
| MtmnxOamGeneralV20v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.5.1.10 | |||
compliance · current The compliance statement for management of OAM general capabilities added in Nokia SROS series systems for Release 20. | ||||
| MtmnxOamGeneralV22v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.5.1.12 | |||
compliance · current The compliance statement for management of OAM general capabilities added in Nokia SROS series systems for Release 22. | ||||
| NtmnxOamGeneralGroups | 1.3.6.1.4.1.6527.3.1.1.11.5.2 | |||
| GtmnxOamGeneralV8v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.1 | |||
group · current The group of objects supporting management of OAM test general capabilities on Nokia SROS systems, release 8.0 R4. | ||||
| GtmnxOamGeneralV10v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.2 | |||
group · current The group of objects supporting management of OAM test general capabilities on Nokia SROS systems, release 10.0. | ||||
| GtmnxOamGeneralV11v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.3 | |||
group · current The group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 11.0. | ||||
| GtmnxOamGeneralV14v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.6 | |||
group · current The group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 14.0. | ||||
| GtmnxOamGeneralV19v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.9 | |||
group · current The group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 19. | ||||
| GtmnxOamGenPoolSplitV20v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.10 | |||
group · current A group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 20. | ||||
| GtmnxOamGenPoolShareV20v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.11 | |||
group · current A group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 20. | ||||
| GtmnxOamGenObsoletedV21v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.12 | |||
group · current The group of OAM general objects obsoleted in release 21. | ||||
| GtmnxOamGenSessPoolStRtV22v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.13 | |||
group · current A group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 22. | ||||
| GtmnxOamGenTxPoolV22v0Group | 1.3.6.1.4.1.6527.3.1.1.11.5.2.14 | |||
group · current A group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 22. | ||||
| GtmnxOamGenSessPoolStHstV22v0Grp | 1.3.6.1.4.1.6527.3.1.1.11.5.2.15 | |||
group · current A group of additional objects supporting management of general OAM test capabilities on Nokia SROS systems, release 22. | ||||
| NtmnxOamDiagConformance | 1.3.6.1.4.1.6527.3.1.1.11.6 | |||
| NtmnxOamDiagCompliances | 1.3.6.1.4.1.6527.3.1.1.11.6.1 | |||
| MtmnxOamDiagV16v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.6.1.1 | |||
compliance · current The compliance statement for management of OAM diagnostic capabilities added in Nokia SROS series systems for Release 16.0. | ||||
| MtmnxOamDiagV23v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.6.1.6 | |||
compliance · current The compliance statement for management of OAM diagnostic capabilities added in Nokia SROS series systems for Release 23.
| ||||
| NtmnxOamDiagGroups | 1.3.6.1.4.1.6527.3.1.1.11.6.2 | |||
| GtmnxOamDiagV16v0Group | 1.3.6.1.4.1.6527.3.1.1.11.6.2.1 | |||
group · current The group of additional objects supporting management of OAM diagnostic capabilities on Nokia SROS systems, release 16.0.
| ||||
| GtmnxOamDiagNotificationV16v0Grp | 1.3.6.1.4.1.6527.3.1.1.11.6.2.2 | |||
group · current The group of notifications supporting OAM Diagnostic tests on Nokia SROS series systems release 16.0.
| ||||
| GtmnxOamDiagNotifyObjsV16v0Group | 1.3.6.1.4.1.6527.3.1.1.11.6.2.3 | |||
group · current The group of additional accessible-for-notify objects supporting management of OAM diagnostic capabilities on Nokia SROS systems, release 16.0.
| ||||
| NtmnxOamDiagV23v0Groups | 1.3.6.1.4.1.6527.3.1.1.11.6.2.8 | |||
| GtmnxOamDiagV23v0Group | 1.3.6.1.4.1.6527.3.1.1.11.6.2.8.1 | |||
group · current The group of additional objects supporting management of OAM diagnostic capabilities on Nokia SROS systems, release 23. | ||||
| NtmnxOamIfPingConformance | 1.3.6.1.4.1.6527.3.1.1.11.7 | |||
| NtmnxOamIfPingCompliances | 1.3.6.1.4.1.6527.3.1.1.11.7.1 | |||
| MtmnxOamIfPingV20v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.7.1.1 | |||
compliance · current The compliance statement for management of OAM ICMP status propagation.
| ||||
| NtmnxOamLnkMeasConformance | 1.3.6.1.4.1.6527.3.1.1.11.8 | |||
| NtmnxOamLnkMeasCompliances | 1.3.6.1.4.1.6527.3.1.1.11.8.1 | |||
| MtmnxOamLnkMeasV21v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.8.1.1 | |||
compliance · current The compliance statement for the OAM Link Measurement functionality on Nokia SROS Release 21.0.
| ||||
| MtmnxOamLnkMeasV22v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.8.1.2 | |||
compliance · current The compliance statement for the OAM Link Measurement functionality on Nokia SROS Release 22.0.
| ||||
| NtmnxOamLagMeasConformance | 1.3.6.1.4.1.6527.3.1.1.11.9 | |||
| NtmnxOamLagMeasCompliances | 1.3.6.1.4.1.6527.3.1.1.11.9.1 | |||
| MtmnxOamLagMeasV24v0Compliance | 1.3.6.1.4.1.6527.3.1.1.11.9.1.1 | |||
compliance · current The compliance statement for OAM LAG Measurement functionality on Nokia SROS Release 24.
| ||||
| NtmnxOamTestObjs | 1.3.6.1.4.1.6527.3.1.2.11 | |||
| NtmnxOamPingObjs | 1.3.6.1.4.1.6527.3.1.2.11.1 | |||
| NtmnxOamPingNotificationObjects | 1.3.6.1.4.1.6527.3.1.2.11.1.1 | |||
| StmnxOamPingMaxConcurrentTests | 1.3.6.1.4.1.6527.3.1.2.11.1.2 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The maximum number of concurrent active OAM ping tests that are allowed within an agent implementation. A value of zero (0) for this object implies that there is no limit for the number of concurrent active tests in effect.
| ||||
| TtmnxOamPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.3 | NA | ||
table · not-accessible · current tmnxOamPingCtlTable contains configuration and status information for ping tests. tmnxOamDiagCtlTable and tmnxOamTrCtlTable fill the same role for diagnostic tests and trace route tests, respectively. | ||||
| RtmnxOamPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1 | NA | ||
row · not-accessible · current tmnxOamPingCtlEntry contains configuration and status information for one ping test. Rows are created/destroyed using tmnxOamPingCtlRowStatus. The test's test type (e.g. 'icmpPing(15)') is configured using tmnxOamPingCtlTestMode. Depending on the test type, configuration specific to the test type may reside in a child table (e.g. tmnxOamIcmpPingCtlTable, tmnxOamLspPingCtlTable). Test results reside in the tables listed in the tmnxOamPingCtlTestMode DESCRIPTION clause. | ||||
| CtmnxOamPingCtlOwnerIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.1 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamPingCtlOwnerIndex specifies the owner name of the test. | ||||
| CtmnxOamPingCtlTestIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.2 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamPingCtlTestIndex specifies the test name of the test. The test is identified by the owner name and the test name. One owner typically owns several tests. This indexing method ensures tests created by several owners have unique indices. | ||||
| CtmnxOamPingCtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamPingCtlRowStatus specifies the status of the row for the specified ping test. Deleting a row deletes all the child rows with the same owner name and test name, including additional configuration rows (e.g. tmnxOamIcmpPingCtlEntry), and rows containing test results (e.g. tmnxOamVxlanPingHistoryEntry). | ||||
| CtmnxOamPingCtlStorageType | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.4 | StorageType | RC | obsolete |
column · StorageType · read-create · obsolete This object was marked obsolete in SROS Release 14.0 R1. There is no replacement object. | ||||
| CtmnxOamPingCtlDescr | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.5 | SnmpAdminString | RC | obsolete |
column · SnmpAdminString · read-create · obsolete This object was marked obsolete in SROS Release 14.0 R1. There is no replacement object. | ||||
| CtmnxOamPingCtlTestMode | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamPingCtlTestMode specifies the type of OAM ping
test defined by this row.
none - the test type is unspecified.
sdpPing - tests SDP connectivity and round trip time.
mtuPing - tests MTU path size.
svcPing - determines the existence and operational state of the
service ID on the far end ESR.
macPing - determines address mappings for the service ID.
macPopulate - populates an OAM MAC address into the FIBs.
macPurge - deletes an OAM MAC address from the FIBs.
lspPing - tests Label Switched Path (LSP) path connectivity and round
trip time.
vprnPing - tests IP path connectivity and round trip time within a
specified VPRN service.
mfibPing - tests IP multicast connectivity and round trip time within a
specified VPLS service.
cpePing - determines IP connectivity to a CPE within a specified VPLS
service.
mrInfo - get a multicast router's capabilities and the list of
interfaces with neighbors.
vccvPing - Virtual Circuit Connectivity Verification, testing
pseudowire connectivity and round trip time.
icmpPing - tests IP connectivity and round trip time.
dnsPing - tests DNS name resolution connectivity and round trip time.
ancpLoopback - send an OAM loopback test request to the access node.
p2mpLspPing - tests P2MP LSP path connectivity and round trip time.
ethCfmLoopback - performs Ethernet Connectivity Fault Management (CFM)
loopback tests. This MIB supports the SAA form of this
test only (the OAM form uses a separate set of objects - see
IEEE8021-CFM-MIB).
ethCfmTwoWayDelay - performs Ethernet Connectivity Fault Management
(CFM) two way delay tests. This MIB supports the SAA form
of this test only (the OAM form uses a separate set of
objects - see IEEE8021-CFM-MIB).
gtpPing - tests GTP (GPRS Tunnelling Protocol) path connectivity.
ethCfmTwoWaySlm - performs Ethernet Connectivity Fault Management
(CFM) two way Synthetic Loss Measurement (SLM) tests. This
MIB supports the SAA form of this test only (the OAM form
uses a separate set of objects - see
TIMETRA-IEEE8021-CFM-MIB).
vxlanPing - tests Virtual Extensible Local Area Network (VXLAN)
connectivity, checks the status of configured VXLAN Network
IDs (VNIs), and allows validation of connected end systems.
bierPing - performs a Bit Index Explicit Replication (BIER)
multicast connectivity test.
When tmnxOamPingCtlTestMode is set, SROS may automatically create a
same-INDEX row in a table used to configure objects specific to the
test type (as shown in the following table).
tmnxOamPingCtlTestMode Auto-Gen Row for Additional Configuration
---------------------- -----------------------------------------
'ancpLoopback' tmnxOamAncpTestCtlTable
'bierPing' tmnxOamBierPingCtlTable
'cpePing' tmnxOamCpePingCtlTable
'dnsPing' none
'ethCfmLoopback' tmnxOamEthCfmPingCtlTable
'ethCfmTwoWayDelay' tmnxOamEthCfmPingCtlTable
'ethCfmTwoWaySlm' tmnxOamEthCfmPingCtlTable
'gtpPing' tmnxOamMobGtpPingCtlTable
'icmpPing' tmnxOamIcmpPingCtlTable
'lspPing' tmnxOamLspPingCtlTable
'macPing' tmnxOamMacPingCtlTable
'macPopulate' tmnxOamMacPingCtlTable
'macPurge' tmnxOamMacPingCtlTable
'mfibPing' tmnxOamMfibPingCtlTable
'mrInfo' none
'mtuPing' none
'p2mpLspPing' tmnxOamP2mpLspPingCtlTable
'sdpPing' none
'svcPing' none
'vccvPing' tmnxOamVccvPingCtlTable
'vprnPing' tmnxOamVprnPingCtlTable
'vxlanPing' tmnxOamVxlanPingCtlTable
Some test types allow additional rows to be created (using a RowStatus
object) to hold additional configuration information, as shown in the
following table.
tmnxOamPingCtlTestMode createAndGo Rows for Additional Configuration
---------------------- ---------------------------------------------
'bierPing' tmnxOamBierPingBfrPfxCtlTable
'p2mpLspPing' tmnxOamP2mpLspPingIPAddressTable
otherwise none
For most test types, all test results are available in
tmnxOamPingResultsTable and tmnxOamPingHistoryTable. Exceptions are
noted in the following two tables.
tmnxOamPingCtlTestMode Additional Results Table(s)
---------------------- ----------------------------
'ancpLoopback' tmnxOamAncpTestHistoryTable
'bierPing' tmnxOamBierPingHistoryTable
'macPing' tmnxOamMacPingHistoryTable
'mrInfo' tmnxOamMRInfoRespIfNbrTable
tmnxOamMRInfoRespIfTable
tmnxOamMRInfoRespTable
'vxlanPing' tmnxOamVxlanPingHistoryTable
tmnxOamVxlanPingResultsTable
otherwise none
tmnxOamPingCtlTestMode Unused Standard Results Table
---------------------- -----------------------------
'ancpLoopback' tmnxOamPingHistoryTable
'macPing' tmnxOamPingHistoryTable
'macPopulate' tmnxOamPingHistoryTable
'macPurge' tmnxOamPingHistoryTable
otherwise none
The support for Service Assurance Agent (SAA) tests (i.e. tests with
tmnxOamSaaCtlTable rows) and OAM tests (i.e. tests without
tmnxOamSaaCtlTable rows) varies with the test type, as shown in the
following table.
tmnxOamPingCtlTestMode SAA Supported OAM Supported
---------------------- ------------- -------------
'ancpLoopback' No Yes
'bierPing' No Yes
'cpePing' Yes Yes
'dnsPing' Yes Yes
'ethCfmLoopback' Yes No
'ethCfmTwoWayDelay' Yes No
'ethCfmTwoWaySlm' Yes No
'gtpPing' No Yes
'icmpPing' Yes Yes
'lspPing' Yes Yes
'macPing' Yes Yes
'macPopulate' No Yes
'macPurge' No Yes
'mfibPing' No Yes
'mrInfo' No Yes
'mtuPing' No Yes
'p2mpLspPing' No Yes
'sdpPing' Yes Yes
'svcPing' No Yes
'vccvPing' Yes Yes
'vprnPing' Yes Yes
'vxlanPing' No Yes
| ||||
| CtmnxOamPingCtlAdminStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.7 | TmnxEnabledDisabledAdminState | RC | |
column · TmnxEnabledDisabledAdminState · read-create · current The value of tmnxOamPingCtlAdminStatus specifies the administrative state of the specified ping test. An attempt to set tmnxOamPingCtlAdminStatus to 'enabled' will fail if the objects required by the ping test have not been set. When this object has the value 'enabled' an attempt to modify any of the test's configurable objects will fail. Upon completion of a ping test, the agent resets the value of this object to 'disabled'. | ||||
| CtmnxOamPingCtlOrigSdpId | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.8 | SdpId | RC | |
column · SdpId · read-create · current Specifies the originating SDP-ID to be used for performing a sdp-ping or mtu-ping operation. This parameter is required only if tmnxOamPingCtlTestMode has a value of either 'sdpPing' or 'mtuPing'. The far-end address of the specified SDP-ID is the expected responder-id within each OAM reply message received. The specified SDP-ID defines the encapsulation of the SDP tunnel encapsulation used to reach the far-end. This can be IP/GRE or MPLS. The value of tmnxOamPingCtlFcName is used to define the outgoing forwarding class used for the SDP encapsulation. If the value of tmnxOamPingCtlOrigSdpId is invalid, or the SDP is administratively down, or unavailable, the OAM Echo request message probe is not sent and an appropriate error value is written to tmnxOamPingHistoryStatus for that probe entry. Once the interval timer expires, the next probe attempt will be made if required. | ||||
| CtmnxOamPingCtlRespSdpId | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.9 | SdpId | RC | |
column · SdpId · read-create · current Specifies the return SDP-ID to be used by the far-end node for its message reply. This parameter is optional and is valid only if tmnxOamPingCtlTestMode has a value of 'sdpPing'. If this SDP-ID does not exist on the far-end, terminates on another node different than the originating node, or some other issue prevents the far-end from using the specified SDP-ID, the OAM Echo message reply is sent using generic IP/GRE OAM encapsulation. The received forwarding class (as mapped on the ingress network interface for the far-end) defines the forwarding class encapsulation for the reply message. | ||||
| CtmnxOamPingCtlFcName | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.10 | TFCName | RC | |
column · TFCName · read-create · current The value of tmnxOamPingCtlFcName specifies the forwarding class to be used when launching the probe(s). The forwarding class name must be present in the index column of TIMETRA-QOS-MIB::tFCNameTable. As shown in the following table: 1. This object is applicable to a subset of the test types, and 2. This object is configurable for a subset of the test types, and 3. The default forwarding class depends on the test type. tmnxOamPingCtlTestMode Applicable? Configurable? Default ---------------------- ----------- ------------- ------- 'cpePing' yes yes 'be' 'bierPing' yes yes 'be' 'ethCfmLoopback' yes yes 'nc' 'ethCfmTwoWayDelay' yes yes 'nc' ethCfmTwoWaySlm' yes yes 'nc' 'icmpPing' yes yes 'nc' 'lspPing' yes yes 'be' 'macPing' yes yes 'be' 'p2mpLspPing' yes yes 'be' 'sdpPing' yes yes 'be' 'svcPing' yes no 'nc' 'vccvPing' yes yes 'be' 'vprnPing' yes yes 'be' 'vxlanPing' yes yes 'be' otherwise no N/A N/A For 'ethCfmLoopback','ethCfmTwoWayDelay', and 'ethCfmTwoWaySlm', the forwarding class depends on whether the request is configured to egress on a network port or an access port. In the network port case, the forwarding class is the forwarding class of the pseudowire. In the access port case, the forwarding class is that of the SAP's egress encapsulation policy. For 'lspPing' this is the forwarding class of the LSP tunnel. For 'macPing' or 'sdpPing' this is the forwarding class of the SDP encapsulation. For 'p2mpLspPing' this is the forwarding class of the P2MP LSP tree. For 'vccvPing' this is the forwarding class of the pseudowire. If forwarding classes are mapped by the applicable QoS policy, the probe(s) may be launched using a different forwarding class than the forwarding class specified by this object. | ||||
| CtmnxOamPingCtlProfile | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.11 | TProfile | RC | |
column · TProfile · read-create · current The value of tmnxOamPingCtlProfile specifies the profile to be used with the forwarding class specified in tmnxOamPingCtlFcName. As shown in the following table: 1. This object is applicable to a subset of the test types, and 2. This object is configurable for a subset of the test types, and 3. The default profile value depends on the test type. tmnxOamPingCtlTestMode Applicable? Configurable? Default ---------------------- ----------- ------------- ------- 'cpePing' yes yes 'out(2)' 'bierPing' yes yes 'out(2)' 'ethCfmLoopback' yes yes 'in(1)' 'ethCfmTwoWayDelay' yes yes 'in(1)' 'ethCfmTwoWaySlm' yes yes 'in(1)' 'lspPing' yes yes 'out(2)' 'macPing' yes yes 'out(2)' 'p2mpLspPing' yes yes 'out(2)' 'sdpPing' yes yes 'out(2)' 'svcPing' yes no 'in(1)' 'vccvPing' yes yes 'out(2)' 'vprnPing' yes yes 'out(2)' 'vxlanPing' yes yes 'in(1)' otherwise no N/A N/A | ||||
| CtmnxOamPingCtlMtuStartSize | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.12 | Unsigned32 (0 | 40..9786) | RC | |
column · Unsigned32 (0 | 40..9786) · read-create · current The value of tmnxOamPingCtlMtuStartSize specifies the size of the first OAM Echo message sent as part of an 'mtuPing' test. Setting this object to a non-zero value is a prerequisite for starting an 'mtuPing' test. Its value must be less than or equal to the value of tmnxOamPingCtlMtuEndSize. An attempt to set this object from a non-zero value to zero will fail with a wrongValue error. Changing the message size is a method of checking the ability of an SDP to support a particular path-mtu value. The size of the message does not include the SDP encapsulation, VC-Label (if applied) or any DLC headers or trailers.
| ||||
| CtmnxOamPingCtlMtuEndSize | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.13 | Unsigned32 (0 | 40..9786) | RC | |
column · Unsigned32 (0 | 40..9786) · read-create · current The value of tmnxOamPingCtlMtuEndSize specifies the size of the last OAM Echo message sent as part of an 'mtuPing' test. Setting this object to a non-zero value is a prerequisite for starting an 'mtuPing' test. Its value must be greater than or equal to the value of tmnxOamPingCtlMtuStartSize. An attempt to set this object from a non-zero value to zero will fail with a wrongValue error.
| ||||
| CtmnxOamPingCtlMtuStepSize | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.14 | Unsigned32 (1..512) | RC | |
column · Unsigned32 (1..512) · read-create · current Specifies the number of octets by which to increment the OAM Echo message request size for each message request sent when tmnxOamPingCtlTestMode is set equal to 'mtuPing'. If the next incremented message size is greater than tmnxOamPingCtlMtuEndSize, the last message has already been sent. The next size message is not sent until a reply is received or three messages have timed out at the current size.
| ||||
| CtmnxOamPingCtlTargetIpAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.16 | IpAddress | RC | obsolete |
column · IpAddress · read-create · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamPingCtlTgtAddrType and tmnxOamPingCtlTgtAddress. | ||||
| CtmnxOamPingCtlServiceId | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.17 | TmnxServId (0..2147483647) | RC | |
column · TmnxServId (0..2147483647) · read-create · current The value of tmnxOamPingCtlServiceId specifies the service ID of the service being tested. The applicability of tmnxOamPingCtlServiceId varies with the test type, as shown in the following table. tmnxOamPingCtlTestMode Applicability Related Virtual Router Object ---------------------- ------------- ----------------------------- 'cpePing' mandatory none 'icmpPing' optional tmnxOamPingCtlVRtrID 'macPing' mandatory none 'macPopulate' mandatory none 'macPurge' mandatory none 'mfibPing' mandatory none 'mrInfo' optional tmnxOamPingCtlVRtrID 'p2mpLspPing' optional tmnxOamPingCtlVRtrID 'svcPing' mandatory none 'vprnPing' mandatory none 'vxlanPing' mandatory none otherwise not applicable none When tmnxOamPingCtlServiceId is mandatory, a non-zero value must be provided. When tmnxOamPingCtlServiceId is optional, it is used to specify a VPRN service. The test must use the VPRN service's virtual router. When a related virtual router object is shown, the interaction is described in the DESCRIPTION clause of the listed object. When tmnxOamPingCtlTestMode is 'icmpPing', tmnxOamPingCtlRouterInstanceName is the preferred object for specifying the service to be tested. Service IDs larger than 2147483647 are internal, so they are excluded from the range. The default value is the null service ID. | ||||
| CtmnxOamPingCtlLocalSdp | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.18 | TruthValue | RC | |
column · TruthValue · read-create · current When the value of tmnxOamPingCtlLocalSdp is 'true', the 'svcPing' test determines an egress SDP-ID that is bound to the service that has the far-end IP address specified in tmnxOamPingCtlTgtAddress assigned to it. The far-end address of the specified SDP-ID is the expected responder-id within the OAM Echo reply message. The SDP-ID defines the encapsulation of the SDP tunnel encapsulation used to reach the far-end. This can be IP/GRE or MPLS. On the originator egress, the Service-ID must have an associated VC-Label to reach the far-end address of the SDP-ID and the SDP-ID must be operational for the message to be sent. This object is applicable only when tmnxOamPingCtlTestMode is 'svcPing'. | ||||
| CtmnxOamPingCtlRemoteSdp | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamPingCtlRemoteSdp specifies the encapsulation of the ping reply to be sent by the far end node. When tmnxOamPingCtlRemoteSdp is 'false', the far-end node sends the reply using the generic IP/GRE OAM encapsulation. When tmnxOamPingCtlRemoteSdp is 'true', the far-end node sends the reply using the same service tunnel encapsulation labeling used for the associated service traffic. If that labeling cannot be found, the generic IP/GRE OAM encapsulation is used. This object is applicable only when tmnxOamPingCtlTestMode is 'svcPing'. | ||||
| CtmnxOamPingCtlSize | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.20 | Unsigned32 (0..16384) | RC | |
column · Unsigned32 (0..16384) · read-create · current The value of tmnxOamPingCtlSize specifies (directly or indirectly) the size of the OAM echo request PDU. The supported ranges, etc, for each test type are specified in the following table. tmnxOamPingCtlTestMode Minimum Maximum Default Auto Adjust ---------------------- ------- ------- ------- ----------- 'ethCfmLoopback' 0 1500 0 No 'ethCfmTwoWaySlm' 0 1500 0 No 'icmpPing' 0 16384 56 No 'lspPing' 1 9786 1 Yes 'macPing' 1 9786 72 Yes 'mfibPing' 1 9786 72 Yes 'p2mpLspPing' 1 9786 1 Yes 'sdpPing' 72 9786 72 Yes 'vccvPing' 1 9786 1 Yes 'vprnPing' 1 9786 72 Yes 'vxlanPing' 0 2000 0 No otherwise tmnxOamPingCtlSize is not significant For a test type supporting Auto Adjust, if the tmnxOamPingCtlSize value is too small, SROS automatically chooses the next highest supported PDU size. For example, if tmnxOamPingCtlSize is 1 when a 'vccvPing' test is started on a FEC 128 pseudowire, an 88 octet echo request PDU is sent. For a test type which does not support Auto Adjust, the tmnxOamPingCtlSize value must lead to a valid echo request PDU size. When tmnxOamPingCtlTestMode has the value 'ethCfmLoopback' or 'ethCfmTwoWaySlm', tmnxOamPingCtlSize specifies the number of octets in the Value field of the Data TLV of the applicable Y.1731 PDU. If zero is specified, the packet has no Data TLV. When tmnxOamPingCtlTestMode has the value 'icmpPing', tmnxOamPingCtlSize specifies the size of the Data field of the RFC 792 ICMP Echo Message. When tmnxOamPingCtlTestMode has the value 'vxlanPing', tmnxOamPingCtlSize specifies the total size of the Pad TLV added to the launched VXLAN ping request. tmnxOamPingCtlSize = 0 indicates no Pad TLV is added. The smallest Pad TLV is five bytes, so values in the range 1..4 are rejected. IPv4 echo requests sent for an 'icmpPing' test can optionally be fragmented (see tmnxOamIcmpPingCtlDoNotFragment). For all the other ping test types, echo requests are launched without fragmentation.
| ||||
| CtmnxOamPingCtlTimeOut | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.21 | Unsigned32 (1..120) | RC | |
column · Unsigned32 (1..120) · read-create · current The value of tmnxOamPingCtlTimeOut specifies the timeout value, in
seconds, to be used during a test run.
Timers (with duration configured using the tmnxOamPingCtlTimeOut value)
are used in one of two ways during a test run.
1. Per Probe: a timer is started each time a probe is sent. If the
timer expires before the probe response arrives, the probe is
declared failed. This is the traditional timeout method for a
sequence of probes.
OR
2. Per Test: a timer is started once per test run, when the last
probe of the test run is sent. ANY probe which does not have a
response when the timer expires is declared failed.
SROS chooses 'Per Probe' or 'Per Test' based on the
tmnxOamPingCtlTestMode value. The choice is not configurable.
The accepted minimum, maximum, and default values for
tmnxOamPingCtlTimeOut depend on tmnxOamPingCtlTestMode, as shown in the
following table. The table also shows the timer usage for the test
mode.
tmnxOamPingCtlTestMode Min Max Def Timer Usage
---------------------- --- --- --- -----------
'bierPing' 1 120 10 Per Probe
'dnsPing' 1 120 5 Per Probe
'ethCfmLoopback' 1 10 5 Per Probe
'ethCfmTwoWayDelay' 1 10 5 Per Test
'ethCfmTwoWaySlm' 1 10 5 Per Test
'gtpPing' 1 10 5 Per Probe
'icmpPing' 1 10 5 Per Test
'lspPing' 1 10 5 Per Probe
'macPing' 1 10 5 Per Probe
'mfibPing' 1 100 5 Per Probe
'mtuPing' 1 10 5 Per Probe
'p2mpLspPing' 1 120 10 Per Probe
'sdpPing' 1 10 5 Per Probe
'vccvPing' 1 10 5 Per Probe
'vprnPing' 1 100 5 Per Probe
'vxlanPing' 1 10 5 Per Probe
otherwise ......... the value of tmnxOamPingCtlTimeOut is irrelevant
| ||||
| CtmnxOamPingCtlProbeCount | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.22 | Unsigned32 (1..100000) | RC | |
column · Unsigned32 (1..100000) · read-create · current The value of tmnxOamPingCtlProbeCount specifies the number of probes to send during the test. The relevance, range, and default for tmnxOamPingCtlProbeCount depends on tmnxOamPingCtlTestMode, as follows. tmnxOamPingCtlTestMode Relevant? Min Max Default ---------------------- --------- --- --- ------- 'ancpLoopback' Yes 1 32 1 'cpePing' Yes 1 100 1 'dnsPing' Yes 1 100 1 'ethCfmLoopback' Yes 1 100 1 'ethCfmTwoWayDelay' Yes 1 1000 1 'ethCfmTwoWaySlm' Yes 1 1000 1 'gtpPing' Yes 1 100 1 'icmpPing' Yes 1 100000 5 'lspPing' Yes 1 100 1 'macPing' Yes 1 100 1 'mfibPing' Yes 1 100 1 'sdpPing' Yes 1 100 1 'vccvPing' Yes 1 100 1 'vprnPing' Yes 1 100 1 'vxlanPing' Yes 1 1024 1 otherwise No N/A N/A N/A
| ||||
| CtmnxOamPingCtlInterval | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.23 | Unsigned32 (1..10000) | RC | |
column · Unsigned32 (1..10000) · read-create · current The value of tmnxOamPingCtlInterval specifies the time to wait between the transmission of one OAM Echo request and the next. The UNITS are specified by tmnxOamPingCtlIntervalUnits. For example, if tmnxOamPingCtlInterval has the value 1, and tmnxOamPingCtlIntervalUnits has the value 'centiseconds(2)', the interval between OAM Echo requests is 0.01 seconds. The applicability, range, and default value of the interval specified using the tmnxOamPingCtlInterval and tmnxOamPingCtlIntervalUnits pair vary with tmnxOamPingCtlTestMode and tmnxOamIcmpPingCtlRapid, as shown in the following table. tmnxOamPingCtlTestMode Supported Values (sec) Default (sec) ------------------------ ------------------------------ ------------- 'bierPing' not applicable 'ethCfmLoopback' 1, 2, .. 10 5 'ethCfmTwoWayDelay' 0.1, 0.2, .. 0.9; 1, 2, .. 10 5 'ethCfmTwoWaySlm' 0.1, 0.2, .. 0.9; 1, 2, .. 10 5 'gtpPing' 1, 2, .. 10 5 'icmpPing' with RAPID 0.01, 0.02, .. 100.00 0.01 'icmpPing' without RAPID 1, 2, .. 10000 1 'p2mpLspPing' not applicable 'vxlanPing' 0.1; 1, 2, .. 10 1 otherwise 1, 2, .. 10 1 | ||||
| CtmnxOamPingCtlMaxRows | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.24 | Unsigned32 | RC | obsolete |
column · Unsigned32 · read-create · obsolete This object was marked obsolete in SROS Release 6.0R17.
| ||||
| CtmnxOamPingCtlTrapGeneration | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.25 | Bits | RC | |
column · Bits · read-create · current The value of tmnxOamPingCtlTrapGeneration specifies the notification(s) to send for a test run. Each bit enables the transmission of one notification, as follows. 'probeFailure(0)': send one tmnxOamPingProbeFailedV3 notification if at least M successive probes failed during the test run. M is configured using tmnxOamPingCtlTrapProbeFailureFilter. 'testFailure(1)': send one tmnxOamPingTestFailedV3 notification if at least N probes failed during the test run. N is configured using tmnxOamPingCtlTrapTestFailureFilter. 'testCompletion(2)': send one tmnxOamPingTestCompletedV3 notification when the test run is complete.
| ||||
| CtmnxOamPingCtlTrapProbeFailureFilter | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.26 | Unsigned32 (0..15) | RC | |
column · Unsigned32 (0..15) · read-create · current The value of tmnxOamPingCtlTrapProbeFailureFilter specifies the threshold for generating a tmnxOamPingProbeFailedV3 notification. The semantics are explained in the tmnxOamPingProbeFailedV3 DESCRIPTION clause. Setting this object to zero is not recommended - results will vary with the test type. | ||||
| CtmnxOamPingCtlTrapTestFailureFilter | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.27 | Unsigned32 (0..15) | RC | |
column · Unsigned32 (0..15) · read-create · current The value of tmnxOamPingCtlTrapTestFailureFilter specifies the threshold for generating a tmnxOamPingTestFailedV3 notification. The semantics are explained in the tmnxOamPingTestFailedV3 DESCRIPTION clause. Setting this object to zero is not recommended. | ||||
| CtmnxOamPingCtlSAA | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.28 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamPingCtlSAA specifies if this test is an SAA test
(Service Assurance Agent; 'true'), or an OAM test ('false'). If
there is a tmnxOamSaaCtlTable row with the specified index values,
'true' is returned. Otherwise, 'false' is returned. | ||||
| CtmnxOamPingCtlRuns | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamPingCtlRuns indicates the number of times this OAM ping test has started. | ||||
| CtmnxOamPingCtlFailures | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamPingCtlFailures indicates the number of times this OAM ping test has failed. | ||||
| CtmnxOamPingCtlLastRunResult | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.31 | TmnxOamTestResult | RO | |
column · TmnxOamTestResult · read-only · current The value of tmnxOamPingCtlLastRunResult indicates the completion status the last time this test was executed. If this OAM test is currently in progress, this object indicates the result of the previous test run, if any. | ||||
| CtmnxOamPingCtlLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.32 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamPingCtlLastChanged indicates the time the value of a settable object in this row was last changed. | ||||
| CtmnxOamPingCtlVRtrID | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.33 | TmnxVRtrIDOrZero | RC | |
column · TmnxVRtrIDOrZero · read-create · current The value of tmnxOamPingCtlVRtrID specifies the virtual router to be
used for the test.
Zero indicates no virtual router is specified.
A non-zero value must be the index of an active row in
TIMETRA-VRTR-MIB::vRtrConfTable (i.e. tmnxOamPingCtlVRtrID must match
a valid TIMETRA-VRTR-MIB::vRtrID value).
This object is applicable if tmnxOamPingCtlTestMode is 'icmpPing',
'gtpPing', 'mrInfo', or 'p2mpLspPing'.
The table below shows the supported combinations of system-configured
virtual routers and test types.
Supported for Supported for Supported for
tmnxOamPingCtlTestMode Base ? management ? vpls-management ?
---------------------- ------------- ------------- -----------------
'icmpPing' Yes Yes Yes
'gtpPing' Yes Yes Yes
'mrInfo' Yes No No
'p2mpLspPing' Yes No No
When directing an 'icmpPing' test to use a virtual router, the
preferred object is tmnxOamPingCtlRouterInstanceName.
When directing an 'mrInfo' or 'p2mpLspPing' test to use a virtual
router associated with a VPRN service, the virtual router can be
specified using tmnxOamPingCtlVRtrID (with the VPRN's virtual router
number) or tmnxOamPingCtlServiceId (with the VPRN's service number).
tmnxOamPingCtlServiceId is preferred, because service numbers are
constant across an SROS reboot (while virtual routers may be
renumbered). If non-default values are specified for both
tmnxOamPingCtlVRtrID and tmnxOamPingCtlServiceId,
tmnxOamPingCtlServiceId is used. | ||||
| CtmnxOamPingCtlTgtAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.34 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxOamPingCtlTgtAddrType specifies the address type of tmnxOamPingCtlTgtAddress. The values which can be used as part of a successful test depend on tmnxOamPingCtlTestMode, as follows. Test Mode tmnxOamPingCtlTgtAddrType Values Supported ----------- ----------------------------------------------------- 'cpePing' 'ipv4(1)' 'dnsPing' 'ipv4(1)' 'ipv6(2)' 'gtpPing' 'ipv4(1)' 'icmpPing' 'ipv4(1)' 'ipv6(2)' 'ipv6z(4)' 'dns(16)' 'mfibPing' 'ipv4(1)' 'ipv6(2)' 'mrInfo' 'ipv4(1)' 'dns(16)' 'svcPing' 'ipv4(1)' 'vccvPing' 'unknown(0)' 'ipv4(1)' 'vprnPing' 'ipv4(1)' 'ipv6(2)' 'vxlanPing' 'ipv4(1)' otherwise 'unknown(0)' | ||||
| CtmnxOamPingCtlTgtAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.35 | InetAddress | RC | |
column · InetAddress · read-create · current The value of tmnxOamPingCtlTgtAddress specifies the destination host address to be used when performing an OAM ping operation. The corresponding address type is configured using tmnxOamPingCtlTgtAddrType. For 'dnsPing' this is the address of the DNS server that will be asked to resolve the DNS name specified by tmnxOamPingCtlDnsName. | ||||
| CtmnxOamPingCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.36 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxOamPingCtlSrcAddrType specifies the address type of tmnxOamPingCtlSrcAddress. | ||||
| CtmnxOamPingCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.37 | InetAddress (SIZE (0 | 4 | 16)) | RC | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-create · current The value of tmnxOamPingCtlSrcAddress specifies the source IP host address to be used when performing an OAM ping operation. The corresponding address type is configured using tmnxOamPingCtlSrcAddrType. This object is used when tmnxOamPingCtlTestMode is 'dnsPing', 'icmpPing', 'lspPing', 'p2mpLspPing' (LDP), or 'vccvPing'. | ||||
| CtmnxOamPingCtlDnsName | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.38 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current The value of tmnxOamPingCtlDnsName specifies the DNS name to be resolved to an IP address. This object is used when tmnxOamPingCtlTestMode is 'dnsPing'. | ||||
| CtmnxOamPingCtlDNSRecord | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.39 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamPingCtlDNSRecord specifies which DNS record is to be retrieved in this test. This object is used when tmnxOamPingCtlTestMode is 'dnsPing'.
| ||||
| CtmnxOamPingCtlIntervalUnits | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.40 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamPingCtlIntervalUnits specifies the units for tmnxOamPingCtlInterval. For example, if tmnxOamPingCtlIntervalUnits has the value 'centiseconds(2)', and tmnxOamPingCtlInterval has the value 10, the test's interval is 0.1 seconds. The supported combinations of tmnxOamPingCtlIntervalUnits, tmnxOamPingCtlInterval, tmnxOamPingCtlTestMode, and tmnxOamIcmpPingCtlRapid are specified in the tmnxOamPingCtlInterval DESCRIPTION clause. The interaction between this object and tmnxOamIcmpPingCtlRapid is specified in the tmnxOamIcmpPingCtlRapid DESCRIPTION clause.
| ||||
| CtmnxOamPingCtlSubscriberName | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.41 | TLNamedItemOrEmpty | RC | |
column · TLNamedItemOrEmpty · read-create · current The value of tmnxOamPingCtlSubscriberName specifies the name of the
subscriber to be pinged.
When a non-default value for this object is specified, a Layer-2-Aware
Network Address Translation (NAT) ping is requested. The subscriber
name and the target IP address (i.e. tmnxOamPingCtlTgtAddress) are used
together to ping the subscriber's device.
A valid Layer-2-Aware NAT ping must satisfy all of the following
conditions.
1. tmnxOamPingCtlSubscriberName is a valid subscriber name.
2. The test type (i.e. tmnxOamPingCtlTestMode) is 'icmpPing'.
3. The test is not an SAA test (as configured using
tmnxOamSaaCtlRowStatus).
4. The target address type (as configured using
tmnxOamPingCtlTgtAddrType) is 'ipv4(1)'.
5. The value of each of the following objects is default:
tmnxOamIcmpPingCtlBypassRouting,
tmnxOamIcmpPingCtlEgrIfName,
tmnxOamIcmpPingCtlNhAddrType,
tmnxOamIcmpPingCtlRapid. | ||||
| CtmnxOamPingCtlRouterInstanceName | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.42 | TLNamedItemOrEmpty | RC | |
column · TLNamedItemOrEmpty · read-create · current The value of tmnxOamPingCtlRouterInstanceName specifies the name of
the service or virtual router(s) used to transmit the test's probes.
Supported values vary with the test type, as follows.
tmnxOamPingCtlTestMode Names Supported
---------------------- ---------------------------
'dnsPing' 'Base'
'_Base_and_management'
'management'
<VPRN-service-name>
'icmpPing' '' (i.e. the empty string),
'Base'
'management'
'vpls-management'
<VPRN-service-name>
otherwise not relevant.
'_Base_and_management' specifies the 'dnsPing' test will send back to
back DNS name resolution requests to the specified DNS server (as
configured using tmnxOamPingCtlTgtAddress) using the Base router and
the management router. The first successful reply is used. The
timeout configured using tmnxOamPingCtlTimeOut applies to the two
requests simultaneously. This option exists to match the day-one
behavior of 'dnsPing' (when the router-instance was not configurable).
A <VPRN-service-name> is a TIMETRA-SERV-MIB::svcName, with
TIMETRA-SERV-MIB::svcType = 'vprn(4)'.
Names other than the names listed above are accepted, but will not
lead to a successful test.
The service or virtual router(s) used by a 'dnsPing' test can only be
specified using tmnxOamPingCtlRouterInstanceName.
For 'dnsPing', the default is '_Base_and_management'.
The service or virtual router used by an 'icmpPing' test can be
specified using tmnxOamPingCtlVRtrID, tmnxOamPingCtlServiceId, and/or
tmnxOamPingCtlRouterInstanceName.
The following two combinations of the three objects are supported:
1. tmnxOamPingCtlVRtrID = 0,
tmnxOamPingCtlServiceId = 0,
tmnxOamPingCtlRouterInstanceName != ''.
This is the preferred approach.
2. One or both of tmnxOamPingCtlVRtrID and tmnxOamPingCtlServiceId has
a non-zero value,
tmnxOamPingCtlRouterInstanceName = ''.
An attempt to change TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 away
from 'classic(1)' is blocked if tmnxOamPingCtlRouterInstanceName is
empty for an 'icmpPing' test.
When TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 is not 'classic(1)',
each 'icmpPing' test must continue to have a non-empty
tmnxOamPingCtlRouterInstanceName. | ||||
| CtmnxOamPingCtlNewestRunIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.44 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingCtlNewestRunIndex indicates the most recent run of this test in tmnxOamPingResultsTable via its index, tmnxOamPingResultsTestRunIndex. | ||||
| TtmnxOamPingResultsTable | 1.3.6.1.4.1.6527.3.1.2.11.1.4 | NA | ||
table · not-accessible · current tmnxOamPingResultsTable contains the run-level test results for OAM ping tests. Probe-level test results for ping tests reside in tmnxOamPingHistoryTable. | ||||
| RtmnxOamPingResultsEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1 | NA | ||
row · not-accessible · current tmnxOamPingResultsEntry contains the run-level test results for one OAM ping test run. A row is created when a ping test is enabled (using tmnxOamPingCtlAdminStatus). A row is destroyed when: 1. The corresponding test configuration is destroyed (using tmnxOamPingCtlRowStatus), or 2. Results are cleared for the test (using TIMETRA-CLEAR-MIB::tmnxClearAction), or 3. A new run result is available, and the limit on the number of run results retained (3, currently) has been reached. In that case, the oldest run result row is destroyed. | ||||
| CtmnxOamPingResultsOperStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamPingResultsOperStatus indicates the operational state of the specified test run. 'enabled(1)' indicates the test is running.
| ||||
| CtmnxOamPingResultsMinRtt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsMinRtt indicates the minimum round trip time for the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsMaxRtt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsMaxRtt indicates the maximum round trip time for the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsAverageRtt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsAverageRtt indicates the average round trip time for the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsRttSumOfSquares | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsRttSumOfSquares indicates the least significant 32 bits of tmnxOamPingResultsRttHCSumSquares.
| ||||
| CtmnxOamPingResultsMtuResponseSize | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object contains the largest size OAM Echo request message that received a valid reply. The value of this object MUST be reported as 0 when no ping responses have been received or an active test has not yet timed out. When tmnxOamPingCtlTestMode does not have a value of 'mtuPing', this object is not relevant and should contain a value of 0.
| ||||
| CtmnxOamPingResultsSvcPing | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamPingResultsSvcPing indicates the status of the
specified test run.
When the value is read using an SNMP Get:
1. If the test type is 'svcPing', the status of the test run is
returned.
2. If the test type is not 'svcPing', 'undetermined(0)' is returned.
When the value is reported in a notification, the status of the test
run is reported (for any ping test type).
| ||||
| CtmnxOamPingResultsProbeResponses | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsProbeResponses indicates the number of responses received for the specified test run.
| ||||
| CtmnxOamPingResultsSentProbes | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsSentProbes indicates the number of probes sent for the specified test run.
| ||||
| CtmnxOamPingResultsLastGoodProbe | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.12 | DateAndTime | RO | |
column · DateAndTime · read-only · current The value of tmnxOamPingResultsLastGoodProbe indicates the date and time when the most recent response was received for the specified test run. 1970-Jan-01 00:00:00.0 UTC is returned if a response has not been received. | ||||
| CtmnxOamPingResultsLastRespHeader | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.13 | OCTET STRING (SIZE (100)) | RO | obsolete |
column · OCTET STRING (SIZE (100)) · read-only · obsolete This object was marked obsolete in SROS Release 8.0R1 and replaced with tmnxOamPingHistoryRespHdr in tmnxOamPingHistoryTable. | ||||
| CtmnxOamPingResultsMinTt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsMinTt indicates the minimum outbound trip time for the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsMaxTt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsMaxTt indicates the maximum outbound trip time for the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsAverageTt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsAverageTt indicates the average outbound trip time for the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsTtSumOfSquares | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsTtSumOfSquares indicates the least significant 32 bits of tmnxOamPingResultsTtHCSumSquares.
| ||||
| CtmnxOamPingResultsMinInTt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsMinInTt indicates the minimum inbound trip time for the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsMaxInTt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsMaxInTt indicates the maximum inbound trip time for the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsAverageInTt | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsAverageInTt indicates the average inbound trip time for the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsInTtSumOfSqrs | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsInTtSumOfSqrs indicates the least significant 32 bits of tmnxOamPingResultsInTtHCSumSqrs.
| ||||
| CtmnxOamPingResultsOutJitter | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsOutJitter indicates the amount of jitter in the outbound trip times for the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsInJitter | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsInJitter indicates the amount of jitter in the inbound trip times for the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsRtJitter | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingResultsRtJitter indicates the amount of jitter in the round trip times for the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsProbeTimeouts | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsProbeTimeouts indicates the number of probes that timed out for the specified test run. | ||||
| CtmnxOamPingResultsProbeFailures | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.26 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingResultsProbeFailures indicates the total number of probes that failed to be transmitted plus the number of probes that timed out. | ||||
| CtmnxOamPingResultsTestRunIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.27 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamPingResultsTestRunIndex specifies the test run INDEX of the row. The first run of a test is assigned run index 1. The second run of a test is assigned run index 2. Etc. | ||||
| CtmnxOamPingResultsRttOFSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamPingResultsRttOFSumSquares indicates the number of times tmnxOamPingResultsRttSumOfSquares overflowed. | ||||
| CtmnxOamPingResultsRttHCSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.29 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamPingResultsRttHCSumSquares indicates the sum of squares of the round trip times for the specified test run. Its purpose is to enable the standard deviation calculation. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsTtOFSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamPingResultsTtOFSumSquares indicates the number of times tmnxOamPingResultsTtSumOfSquares overflowed. | ||||
| CtmnxOamPingResultsTtHCSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamPingResultsTtHCSumSquares indicates the sum of squares of the outbound trip times for the specified test run. Its purpose is to enable the standard deviation calculation. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsInTtOFSumSqrs | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.32 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamPingResultsInTtOFSumSqrs indicates the number of times tmnxOamPingResultsInTtSumOfSqrs overflowed. | ||||
| CtmnxOamPingResultsInTtHCSumSqrs | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.33 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamPingResultsInTtHCSumSqrs indicates the sum of squares of the inbound trip times for the specified test run. Its purpose is to enable the standard deviation calculation. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingResultsTestRunResult | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.34 | TmnxOamTestResult | RO | |
column · TmnxOamTestResult · read-only · current The value of tmnxOamPingResultsTestRunResult indicates the result of the specified test run. | ||||
| CtmnxOamPingResultsOutOfOrder | 1.3.6.1.4.1.6527.3.1.2.11.1.4.1.35 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamPingResultsOutOfOrder indicates the number of reply PDUs for the specified test run that have arrived out of order. For example, if two probes are sent during the test run (as configured using tmnxOamPingCtlProbeCount), and the two reply PDUs arrive out of order, tmnxOamPingResultsOutOfOrder is 2. This value is supported when tmnxOamPingCtlTestMode is 'vxlanPing'. Zero is returned for all other test types.
| ||||
| TtmnxOamPingHistoryTable | 1.3.6.1.4.1.6527.3.1.2.11.1.5 | NA | ||
table · not-accessible · current tmnxOamPingHistoryTable contains the per-probe results for most ping test types. Exceptions are noted in the tmnxOamPingCtlTestMode DESCRIPTION clause. | ||||
| RtmnxOamPingHistoryEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1 | NA | ||
row · not-accessible · current tmnxOamPingHistoryEntry contains the results for one ping probe.
The first three indices specify the corresponding
tmnxOamPingResultsTable row.
The fourth index specifies the probe yielding the results.
A row is created when one of the following events occurs.
1. A ping echo request cannot be sent (e.g. the destination IP address
is unknown).
2. A ping echo reply (triggered by a ping echo request launched by
this node) arrives.
3. A timeout occurs while waiting for a ping echo reply.
Rows are destroyed when the corresponding tmnxOamPingResultsTable row
is destroyed. | ||||
| CtmnxOamPingHistoryIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamPingHistoryIndex specifies the probe which yielded
the results in this row.
For example:
1. For a unicast ping test with a send-count of 10, the row with
tmnxOamPingHistoryIndex=10 has the result of the last probe to be
sent.
2. For a multicast ping test with 10 destinations, the row with
tmnxOamPingHistoryIndex=10 has the result for the last destination
to be pinged. | ||||
| CtmnxOamPingHistoryResponse | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingHistoryResponse indicates the round trip time for the specified probe. Zero is returned when the information is not available (e.g. the probe timed out).
| ||||
| CtmnxOamPingHistoryOneWayTime | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingHistoryOneWayTime indicates the outbound trip time for the specified probe. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingHistorySize | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingHistorySize indicates the size of the OAM echo request transmitted for this OAM probe. Zero is returned if no probe was transmitted. When tmnxOamPingCtlTestMode is 'ethCfmLoopback', 'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm' the value returned is the size of the transmitted layer 2 frame (including the layer 2 header, but excluding the IEEE 802.1Q Tag field(s)). For other tmnxOamPingCtlTestMode values, the size returned is the tmnxOamPingCtlSize value.
| ||||
| CtmnxOamPingHistoryStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.5 | TmnxOamResponseStatus | RO | |
column · TmnxOamResponseStatus · read-only · current The value of tmnxOamPingHistoryStatus indicates the outcome of the probe. Example values: 'responseReceived', 'requestTimedOut'. | ||||
| CtmnxOamPingHistoryTime | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.6 | DateAndTime | RO | |
column · DateAndTime · read-only · current The value of tmnxOamPingHistoryTime indicates the date and time when the outcome of the specified probe was determined. | ||||
| CtmnxOamPingHistoryReturnCode | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.7 | TmnxOamPingRtnCode | RO | |
column · TmnxOamPingRtnCode · read-only · current The value of tmnxOamPingHistoryReturnCode indicates the OAM return code received in the probe response. For a 'bierPing' test, 'notApplicable(0)' is returned. The probe's return code can be read using tmnxOamBierPingHistoryReturnCode. | ||||
| CtmnxOamPingHistorySrcIpAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.8 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamPingHistorySrcAddrType and tmnxOamPingHistorySrcAddress. | ||||
| CtmnxOamPingHistAddressType | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.9 | TmnxOamAddressType | RO | |
column · TmnxOamAddressType · read-only · current The value of tmnxOamPingHistAddressType indicates the type of binding address information returned in response to the specified probe. 'unknown(0)' is returned when the information is not available. | ||||
| CtmnxOamPingHistSapId | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.10 | TmnxStrSapId | RO | |
column · TmnxStrSapId · read-only · current The value of tmnxOamPingHistSapId is the name of the access port of the SAP supporting the requests returned in response to a 'cpePing', 'mfibPing', or 'vprnPing' probe. If the value of tmnxOamPingHistAddressType is not 'sapId', this object is not relevant and MUST have a null string ''. | ||||
| CtmnxOamPingHistoryVersion | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingHistoryVersion indicates the protocol version for this OAM ping probe reply. | ||||
| CtmnxOamPingHistoryCpeMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.13 | MacAddress | RO | |
column · MacAddress · read-only · current The value of tmnxOamPingHistoryCpeMacAddr indicates the MAC address of the replying CPE for this OAM ping probe reply. The object is applicable to 'cpePing' tests only. If the information is unavailable, '0:0:0:0:0:0' is returned. | ||||
| CtmnxOamPingHistoryRespSvcId | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.14 | TmnxServId | RO | |
column · TmnxServId · read-only · current The value of tmnxOamPingHistoryRespSvcId indicates for an 'mfibPing' the service id to which the SAP responding to the 'mfibPing' probe belongs. If the indicated SAP is part of the same service originating the probe, this value is set to 0. For other types of probes, this value is insignificant and is set to 0. | ||||
| CtmnxOamPingHistorySequence | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingHistorySequence indicates this probe's sequence number. If a probe response was received, this object indicates the sequence number of the response. | ||||
| CtmnxOamPingHistoryIfIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.16 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The value of tmnxOamPingHistoryIfIndex indicates the ifIndex of the interface that this probe was transmitted from. Zero is returned when the information is not available. | ||||
| CtmnxOamPingHistoryDataLen | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingHistoryDataLen indicates for an 'lspPing' the UDP data length of the echo reply, and for 'icmpPing' normally the length starting after the IP header of the echo reply. For 'ethCfmLoopback' and 'ethCfmTwoWaySlm' the value is the number of octets in the Value field of the Data TLV of the Ethernet CFM loopback packet (zero if the packet has no Data TLV). For other types of probes, this value is not significant and is set to 0.
| ||||
| CtmnxOamPingHistoryRespPlane | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.18 | TmnxOamTestResponsePlane | RO | |
column · TmnxOamTestResponsePlane · read-only · current The value of tmnxOamPingHistoryRespPlane indicates the response plane from which this ping response was received. | ||||
| CtmnxOamPingHistoryReqHdr | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.19 | OCTET STRING (SIZE (0 | 1..150)) | RO | obsolete |
column · OCTET STRING (SIZE (0 | 1..150)) · read-only · obsolete This object was marked obsolete in SROS release 10.0 R1. | ||||
| CtmnxOamPingHistoryRespHdr | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.20 | OCTET STRING (SIZE (0 | 1..150)) | RO | |
column · OCTET STRING (SIZE (0 | 1..150)) · read-only · current The value of tmnxOamPingHistoryRespHdr is a copy of the OAM header of
the response packet received for this OAM ping test probe.
The response header is reported only when tmnxOamPingCtlTestMode
has a value of
'ethCfmLoopback',
'ethCfmTwoWayDelay',
'ethCfmTwoWaySlm',
'icmpPing',
'mtuPing',
'sdpPing', or
'svcPing'.
Otherwise, a zero length OCTET STRING is returned. For 'icmpPing'
the value reported is the received ICMP message starting from the IP
header.
The value of this object MUST be reported as a zero length OCTET
STRING when no probe response has been received. | ||||
| CtmnxOamPingHistoryDnsAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.21 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamPingHistoryDnsAddrType indicates the Internet address type stored in tmnxOamPingHistoryDnsAddress. If this was not a 'dnsPing' test or the DNS name specified in tmnxOamPingCtlDnsName could not be resolved, the value of this object will be reported as 'unknown(0)'. | ||||
| CtmnxOamPingHistoryDnsAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.22 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamPingHistoryDnsAddress indicates the Internet address that was resolved from the name specified in tmnxOamPingCtlDnsName by a 'dnsPing' test. If this was not a 'dnsPing' test or the DNS name specified in tmnxOamPingCtlDnsName could not be resolved, the value of this object will be reported as ''H (empty string). | ||||
| CtmnxOamPingHistorySrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.23 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamPingHistorySrcAddrType indicates the Internet address type of the address stored in tmnxOamPingHistorySrcAddress. | ||||
| CtmnxOamPingHistorySrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.24 | InetAddress (SIZE (0 | 4 | 16 | 20)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16 | 20)) · read-only · current The value of tmnxOamPingHistorySrcAddress indicates the Internet address of the remote node targeted by the specified ping probe. In the case of a 'bierPing' test, the remote node's address can be read using tmnxOamBierPingHistoryBfrPfx. | ||||
| CtmnxOamPingHistoryInOneWayTime | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamPingHistoryInOneWayTime indicates the inbound trip time for the specified probe response. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamPingHistoryLspName | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.26 | TLNamedItemOrEmpty | RO | |
column · TLNamedItemOrEmpty · read-only · current The value of tmnxOamPingHistoryLspName indicates the name of the LSP that this probe was transmitted on. The empty string is returned when the test mode is not 'vccvPing'. The empty string is returned when the transport tunnel is not RSVP. | ||||
| CtmnxOamPingHistNextHopAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.27 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamPingHistNextHopAddrType indicates the Internet address type of the address stored in tmnxOamPingHistNextHopAddress. The value 'unknown(0)' is returned when the test mode is not 'vccvPing'. | ||||
| CtmnxOamPingHistNextHopAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.28 | InetAddress (SIZE (0 | 4 | 16 | 20)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16 | 20)) · read-only · current The value of tmnxOamPingHistNextHopAddress indicates the next hop Internet address that this probe was transmitted to. The empty string is returned when the test mode is not 'vccvPing'. | ||||
| CtmnxOamPingHistorySrcGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.29 | TmnxMplsTpGlobalID | RO | |
column · TmnxMplsTpGlobalID · read-only · current The value of tmnxOamPingHistorySrcGlobalId indicates the source MPLS-TP global identifier of the replying node. The value is copied from the reply's RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamPingCtlTestMode is 'lspPing' or 'vccvPing'. Otherwise, zero is returned. | ||||
| CtmnxOamPingHistorySrcNodeId | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.30 | TmnxMplsTpNodeID | RO | |
column · TmnxMplsTpNodeID · read-only · current The value of tmnxOamPingHistorySrcNodeId indicates the source MPLS-TP node identifier of the replying node. The value is copied from the reply's RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamPingCtlTestMode is 'lspPing' or 'vccvPing'. Otherwise, zero is returned. | ||||
| CtmnxOamPingHistorySdpBindId | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.31 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tmnxOamPingHistorySdpBindId indicates the SDP binding provided by the remote system. The value of tmnxOamPingHistorySdpBindId is relevant when tmnxOamPingHistAddressType is 'sdpBindId(9)'. | ||||
| CtmnxOamPingHistoryRtrnSubcode | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.32 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamPingHistoryRtrnSubcode indicates the value present in an MPLS echo reply's RFC 4379 Return Subcode (RSC) field. A valid value is returned when the test has a tmnxOamPingCtlTestMode value of 'lspPing'. Otherwise, zero is returned. | ||||
| CtmnxOamPingHistoryNetworkIfName | 1.3.6.1.4.1.6527.3.1.2.11.1.5.1.33 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tmnxOamPingHistoryNetworkIfName indicates the network interface name provided by the replying node. Network interface names are configured using TIMETRA-VRTR-MIB::vRtrIfName. The value of this object is the empty string when the value of tmnxOamPingHistAddressType is not 'networkInterface(11)'. | ||||
| TtmnxOamMacPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.6 | NA | ||
table · not-accessible · current tmnxOamMacPingCtlTable contains configuration information for 'macPing', 'macPopulate', and 'macPurge' tests. | ||||
| RtmnxOamMacPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1 | NA | ||
row · not-accessible · current tmnxOamMacPingCtlEntry contains configuration information for one 'macPing', 'macPopulate', or 'macPurge' test. SROS creates a row when tmnxOamPingCtlTestMode is set to 'macPing', 'macPopulate', or 'macPurge'. SROS destroys a row when the corresponding tmnxOamPingCtlTable row is destroyed. | ||||
| CtmnxOamMacPingCtlTargetMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.1 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamMacPingCtlTargetMacAddr is a 6-octet value that specifies the target MAC address to be used in the query request for performing an OAM ping operation. This parameter is required. | ||||
| CtmnxOamMacPingCtlSourceMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.2 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamMacPingCtlSourceMacAddr is a 6-octet value that specifies the MAC address to be used as the source in the query request for performing an OAM ping operation. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPing'. | ||||
| CtmnxOamMacPingCtlSendControl | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamMacPingCtlSendControl specifies whether the outbound OAM ping packet will use the data plane or the control plane. When the value is 'false', the packet is sent using the data plane. As of SROS release 13.0 R1, a test cannot be started if tmnxOamMacPingCtlSendControl is 'true'. A test is started using tmnxOamPingCtlAdminStatus. This object will be marked obsolete in a future release. | ||||
| CtmnxOamMacPingCtlReplyControl | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamMacPingCtlReplyControl is 'true', the OAM ping response is returned using the control plane. If its value is 'false', the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPing'. | ||||
| CtmnxOamMacPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.5 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPing'. While performing the test with a TTL of 1 no responses should ever be expected.
| ||||
| CtmnxOamMacPingCtlRegister | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamMacPingCtlRegister is 'true', the OAM ping request is transmitted that causes each upstream node to delete the MAC address only from its forwarding plane but keep it in its control plane in order to inhibit dynamic learning. If its value is 'false', the MAC address is deleted from both the forwarding and control planes. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPurge'. | ||||
| CtmnxOamMacPingCtlFlood | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamMacPingCtlFlood is 'true', the OAM ping request is transmitted that causes each upstream node to add or delete the MAC address. If its value is 'false', the operation is performed locally. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPopulate' or 'macPurge'. | ||||
| CtmnxOamMacPingCtlForce | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamMacPingCtlForce specifies whether or not to add an override to the test. When tmnxOamPingCtlTestMode is 'macPopulate' and tmnxOamMacPingCtlForce is 'true', the MAC type (i.e. TIMETRA-SERV-MIB::tlsFdbType) of the FIB entry specified by the test parameters is set to 'oam', regardless of its earlier value. When tmnxOamPingCtlTestMode is 'macPurge' and tmnxOamMacPingCtlForce is 'true', the FIB entry specified by the test parameters is purged, even if the requesting node did not populate the entry. When tmnxOamPingCtlTestMode is 'macPing', tmnxOamMacPingCtlForce is irrelevant. | ||||
| CtmnxOamMacPingCtlAge | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.9 | Unsigned32 (1..65535) | RW | |
column · Unsigned32 (1..65535) · read-write · current The value of tmnxOamMacPingCtlAge specifies the number of seconds to age this OAM MAC address in the FIB. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPopulate'.
| ||||
| CtmnxOamMacPingCtlSapPortId | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.10 | TmnxPortID | RW | |
column · TmnxPortID · read-write · current The value of tmnxOamMacPingCtlSapPortId is the ID of the access port of the target SAP. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPopulate'. | ||||
| CtmnxOamMacPingCtlSapEncapValue | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.11 | TmnxEncapVal | RW | |
column · TmnxEncapVal · read-write · current The value of tmnxOamMacPingCtlSapEncapValue is the label used to identify the target SAP on the port specified in tmnxOamMacPingCtlSapPortId. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'macPopulate'. | ||||
| CtmnxOamMacPingCtlFibEntryName | 1.3.6.1.4.1.6527.3.1.2.11.1.6.1.12 | TNamedItemOrEmpty | RW | obsolete |
column · TNamedItemOrEmpty · read-write · obsolete This object was marked obsolete in SROS Release 11.0 R1. | ||||
| TtmnxOamMacPingHistoryTable | 1.3.6.1.4.1.6527.3.1.2.11.1.7 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'macPing' probe operation. An entry in this table is created when the result of an OAM 'macPing' probe is determined. An entry is removed from this table when its corresponding tmnxOamPingResultsEntry is deleted. | ||||
| RtmnxOamMacPingHistoryEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamMacPingHistoryTable. The first two index elements identify the tmnxOamPingCtlEntry that a tmnxOamMacPingHistoryEntry belongs to. The third index identifies a specific run of the OAM test. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth index selects a single OAM 'macPing' reply. | ||||
| CtmnxOamMacPingHistoryIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current An entry in this table is created when the result of a OAM 'macPing' probe is determined. The initial 2 instance identifier index values identify the tmnxOamPingCtlEntry that a OAM probe result (tmnxOamMacPingHistoryEntry) belongs to. The tmnxOamMacPingHistoryIndex has the value of the sequence number of the request probe and identifies a group of replies received in response to a specific probe transmission. The agent starts assigning tmnxOamMacPingHistoryIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object. | ||||
| CtmnxOamMacPingReplyIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.2 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The tmnxOamMacPingReplyIndex is unique within a group of responses received as the result of a OAM 'macPing' probe as specified by having the same value for tmnxOamMacPingHistoryIndex. The agent starts assigning tmnxOamMacPingReplyIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object. | ||||
| CtmnxOamMacPingHistoryResponse | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The amount of time measured in microseconds from when a OAM probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit an OAM probe.
| ||||
| CtmnxOamMacPingHistoryOneWayTime | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The amount of time measured in microseconds from when an OAM probe was sent to when it was received by the replier (outbound one-way time). The value of this object is reported as 0 when it is not possible to transmit an OAM probe or the information is not available.
| ||||
| CtmnxOamMacPingHistoryStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.5 | TmnxOamResponseStatus | RO | |
column · TmnxOamResponseStatus · read-only · current The value of tmnxOamMacPingHistoryStatus is an enumerated integer that indicates the result of a particular OAM probe. | ||||
| CtmnxOamMacPingHistoryTime | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.6 | DateAndTime | RO | |
column · DateAndTime · read-only · current Timestamp for when this OAM probe result was determined. | ||||
| CtmnxOamMacPingHistoryReturnCode | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.7 | TmnxOamPingRtnCode | RO | |
column · TmnxOamPingRtnCode · read-only · current The value of tmnxOamMacPingHistoryReturnCode is an enumerated integer that indicates the return code received in the OAM ping response. | ||||
| CtmnxOamMacPingHistorySrcIpAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.8 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMacPingHistorySrcAddrType and tmnxOamMacPingHistorySrcAddress. | ||||
| CtmnxOamMacPingHistoryAddressType | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.9 | TmnxOamAddressType | RO | |
column · TmnxOamAddressType · read-only · current The value of tmnxOamMacPingHistoryAddressType indicates the type of binding address information returned in response to a 'macPing' test. | ||||
| CtmnxOamMacPingHistorySapId | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.10 | TmnxStrSapId | RO | |
column · TmnxStrSapId · read-only · current The value of tmnxOamMacPingHistorySapId is the name of the access port of the SAP supporting the requested MAC address returned in response to a 'macPing' probe. If the value of tmnxOamMacPingHistoryAddressType is not 'sapId', this object is not relevant and MUST have a null string ''. | ||||
| CtmnxOamMacPingHistorySdpId | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.12 | SdpId | RO | |
column · SdpId · read-only · current The value of tmnxOamMacPingHistorySdpId is the ID of the SDP supporting the requested MAC address returned in response to a 'macPing' probe. If the value of tmnxOamMacPingHistoryAddressType is not 'sdpId', this object is not relevant and MUST return a value of '0'. | ||||
| CtmnxOamMacPingHistoryAdminStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamMacPingHistoryAdminStatus indicates the current administrative state of the SAP or SDP ID returned in response to a 'macPing' test. A value of 'true' indicates the SAP or SDP is administratively 'up'. The value of this object MUST be reported as 'false' when no ping responses have been received or an active test has not yet timed out. | ||||
| CtmnxOamMacPingHistoryOperStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.14 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamMacPingHistoryOperStatus indicates the current operational state of the SAP or SDP ID returned in response to a 'macPing' test. A value of 'true' indicates the SAP or SDP is operationally 'up'. The value of this object MUST be reported as 'false' when no ping responses have been received or an active test has not yet timed out. | ||||
| CtmnxOamMacPingHistoryResponsePlane | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.15 | TmnxOamTestResponsePlane | RO | |
column · TmnxOamTestResponsePlane · read-only · current The value of tmnxOamMacPingHistoryResponsePlane indicates the response plane from which this ping response was received. | ||||
| CtmnxOamMacPingHistorySize | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMacPingHistorySize indicates the size in octets of the user payload in a ping request packet. It does not include the service encapsulation.
| ||||
| CtmnxOamMacPingHistoryInOneWayTime | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The amount of time measured in microseconds from when an OAM probe reply was sent to when it was received by this host (inbound one-way time). The value of this object is reported as 0 when the information is not available.
| ||||
| CtmnxOamMacPingHistorySrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.18 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamMacPingHistorySrcAddrType indicates the Internet address type stored in tmnxOamMacPingHistorySrcAddress. | ||||
| CtmnxOamMacPingHistorySrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.7.1.19 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamMacPingHistorySrcAddress indicates the Internet address of the remote node that generated this reply to a OAM probe. | ||||
| TtmnxOamMacPingL2MapTable | 1.3.6.1.4.1.6527.3.1.2.11.1.8 | NA | obsolete | |
table · not-accessible · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| RtmnxOamMacPingL2MapEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1 | NA | obsolete | |
row · not-accessible · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| CtmnxOamMacPingL2MapIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1.1 | Unsigned32 (1..4294967295) | NA | obsolete |
column · Unsigned32 (1..4294967295) · not-accessible · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| CtmnxOamMacPingL2MapRouterID | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1.2 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| CtmnxOamMacPingL2MapLabel | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1.3 | MplsLabel | RO | obsolete |
column · MplsLabel · read-only · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| CtmnxOamMacPingL2MapProtocol | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1.4 | TmnxOamSignalProtocol | RO | obsolete |
column · TmnxOamSignalProtocol · read-only · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| CtmnxOamMacPingL2MapVCType | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1.5 | TmnxOamVcType | RO | obsolete |
column · TmnxOamVcType · read-only · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| CtmnxOamMacPingL2MapVCID | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1.6 | TmnxVcId | RO | obsolete |
column · TmnxVcId · read-only · obsolete This object was marked obsolete in SROS Release 6.1. | ||||
| CtmnxOamMacPingL2MapDirection | 1.3.6.1.4.1.6527.3.1.2.11.1.8.1.7 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete This object was marked obsolete in SROS Release 6.1.
| ||||
| TtmnxOamLspPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.9 | NA | ||
table · not-accessible · current Each row in tmnxOamLspPingCtlTable contains the LSP-specific
configuration information needed to launch an LSP (Label Switched Path)
ping test. The rest of the configuration information needed to launch
the test resides in the corresponding row of tmnxOamPingCtlTable.
Nine types of LSP ping tests are supported. An abbreviated name for
each test type is defined in the following table (for use in a
subsequent table). The test type's tmnxOamLspPingCtlTestSubMode code
point is shown as well.
Test Sub Mode Abbreviated Test Type Name(s)
---------------------- -------------------------------
'unspecified ( 1)' LDP, RSVP (deprecated)
'static ( 2)' TPST (Transport Profile Static)
'bgpLabeledPrefix( 3)' BGP
'srIsis ( 4)' ISIS
'srOspf ( 5)' OSPF
'srTe ( 6)' SRTE
'srPolicy ( 7)' SRPL
'srOspf3 ( 8)' OSP3
'ldp ( 9)' LDP (preferred over 'unspecified(1)')
'rsvpTe (10)' RSVP (preferred over 'unspecified(1)')
The following table has a row for each LSP ping test type, showing the
mandatory and optional objects applicable to the test type.
Test
Type Mandatory Objects Optional Objects
---- -------------------------------- ---------------------------------
BGP tmnxOamLspPingCtlLdpPrefixType *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlLdpPrefixLen tmnxOamLspPingCtlNhIntfName
tmnxOamLspPingCtlTestSubMode #tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
ISIS tmnxOamLspPingCtlLdpPrefixType tmnxOamLspPingCtlIgpInstance
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefixLen *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
tmnxOamLspPingCtlFlexAlgo
LDP tmnxOamLspPingCtlLdpPrefixType *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlLdpPrefixLen tmnxOamLspPingCtlNhIntfName
tmnxOamLspPingCtlTestSubMode #tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
OSPF tmnxOamLspPingCtlLdpPrefixType tmnxOamLspPingCtlIgpInstance
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefixLen *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
tmnxOamLspPingCtlFlexAlgo
OSP3 tmnxOamLspPingCtlLdpPrefixType tmnxOamLspPingCtlIgpInstance
tmnxOamLspPingCtlLdpPrefix *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlLdpPrefixLen *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
RSVP tmnxOamLspPingCtlLspName tmnxOamLspPingCtlPathName
tmnxOamLspPingCtlTestSubMode
SRPL tmnxOamLspPingCtlSrPlcyColor tmnxOamLspPingCtlSrPlcySegList
tmnxOamLspPingCtlSrPlcyEndPtAddr *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlSrPlcyEndPtAddT *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
SRTE tmnxOamLspPingCtlLspName *tmnxOamLspPingCtlNhAddressType
tmnxOamLspPingCtlTestSubMode *tmnxOamLspPingCtlNhAddress
tmnxOamLspPingCtlNhIntfName
#tmnxOamLspPingCtlPathDestType
#tmnxOamLspPingCtlPathDest
tmnxOamLspPingCtlPathName
TPST tmnxOamLspPingCtlLspName tmnxOamLspPingCtlAssocChannel
tmnxOamLspPingCtlTestSubMode tmnxOamLspPingCtlForce
*tmnxOamLspPingCtlMplsTpGlobalId
*tmnxOamLspPingCtlMplsTpNodeId
tmnxOamLspPingCtlMplsTpPathType
ALL none tmnxOamLspPingCtlTtl
tmnxOamPingCtlFcName
tmnxOamPingCtlInterval
tmnxOamPingCtlProbeCount
tmnxOamPingCtlProfile
tmnxOamPingCtlSize
*tmnxOamPingCtlSrcAddrType
*tmnxOamPingCtlSrcAddress
tmnxOamPingCtlTimeOut
---- -------------------------------- ---------------------------------
In the table above,
1. The optional objects in the ALL row apply to all LSP ping test
types.
2. Asterisks (*) mark a set of optional objects which must all be
specified, or must all be unspecified.
3. Octothorpes (#) mark a separate set of optional objects which must
all be specified, or must all be unspecified.
4. There are four supported combinations of
tmnxOamLspPingCtlNhAddressType, tmnxOamLspPingCtlNhAddress,
tmnxOamLspPingCtlNhIntfName, tmnxOamLspPingCtlPathDestType, and
tmnxOamLspPingCtlPathDest, as follows:
a) all unspecified
b) tmnxOamLspPingCtlPathDestType and tmnxOamLspPingCtlPathDest
c) tmnxOamLspPingCtlPathDestType, tmnxOamLspPingCtlPathDest, and
tmnxOamLspPingCtlNhIntfName
d) tmnxOamLspPingCtlPathDestType, tmnxOamLspPingCtlPathDest,
tmnxOamLspPingCtlNhAddressType, and tmnxOamLspPingCtlNhAddress
When an object combination other than a combination listed above is
specified, values will be rejected or ignored, or the test will fail. | ||||
| RtmnxOamLspPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1 | NA | ||
row · not-accessible · current The system creates a row in tmnxOamLspPingCtlTable when tmnxOamPingCtlTestMode is set to 'lspPing'. The system deletes a row in tmnxOamLspPingCtlTable when the corresponding row in tmnxOamPingCtlTable is deleted. | ||||
| CtmnxOamLspPingCtlVRtrID | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.1 | TmnxVRtrID | RW | obsolete |
column · TmnxVRtrID · read-write · obsolete This object was marked obsolete in SROS Release 6.0R15 and replaced with tmnxOamPingCtlVRtrID in tmnxOamPingCtlTable. | ||||
| CtmnxOamLspPingCtlLspName | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.2 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current The value of tmnxOamLspPingCtlLspName specifies the name of the LSP
for this LSP ping test.
When the test is started, if this name is not empty, there must be a
TIMETRA-MPLS-MIB::vRtrMplsLspTable row with:
1. tmnxOamLspPingCtlLspName equal to
TIMETRA-MPLS-MIB::vRtrMplsLspName, AND
2. TIMETRA-VRTR-MIB::vRtrID equal to 1, AND
3. TIMETRA-MPLS-MIB::vRtrMplsLspType equal to 'dynamic(2)',
'bypassOnly(4)', or 'mplsTp(7)'.
Otherwise, the test will fail.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlReturnLsp | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.3 | TNamedItemOrEmpty | RW | obsolete |
column · TNamedItemOrEmpty · read-write · obsolete This object was marked obsolete in SROS Release 4.0. | ||||
| CtmnxOamLspPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.4 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current The value of tmnxOamLspPingCtlTtl specifies the outermost label time- to-live value. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamLspPingCtlPathName | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.5 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current The value of tmnxOamLspPingCtlPathName specifies the name of the Path (LSP) for this LSP ping test. When the test is started, if this name is not empty, there must be a matching name in the column MPLS-TE-MIB::mplsTunnelName. Otherwise, the test will fail. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlLdpIpPrefix | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.6 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamLspPingCtlLdpPrefixType and tmnxOamLspPingCtlLdpPrefix. | ||||
| CtmnxOamLspPingCtlLdpIpPrefixLen | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.7 | IpAddressPrefixLength | RW | obsolete |
column · IpAddressPrefixLength · read-write · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with the InetAddress object tmnxOamLspPingCtlLdpPrefixLen. | ||||
| CtmnxOamLspPingCtlLdpPrefixType | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.8 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspPingCtlLdpPrefixType specifies the type of Internet address stored in tmnxOamLspPingCtlLdpPrefix. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlLdpPrefix | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.9 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspPingCtlLdpPrefix, along with tmnxOamLspPingCtlLdpPrefixType and tmnxOamLspPingCtlLdpPrefixLen, specifies the destination prefix for this LSP ping test. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlLdpPrefixLen | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.10 | InetAddressPrefixLength | RW | |
column · InetAddressPrefixLength · read-write · current The value of tmnxOamLspPingCtlLdpPrefixLen specifies the Internet address prefix length of tmnxOamLspPingCtlLdpPrefix. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamLspPingCtlPathDestType | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.11 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspPingCtlPathDestType specifies the type of Internet address stored in tmnxOamLspPingCtlPathDest. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlPathDest | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.12 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspPingCtlPathDest specifies a unique path for this LSP ping to traverse. This address is used as part of a hash key to select the appropriate ECMP path to the destination of an LSP ping test. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlNhIntfName | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.13 | TNamedItemOrEmpty | RW | |
column · TNamedItemOrEmpty · read-write · current The value of tmnxOamLspPingCtlNhIntfName specifies the name of the
next hop interface to be used when transmitting an LSP ping.
When the test is started, if this name is not empty, there must be a
TIMETRA-VRTR-MIB::vRtrIfTable row with:
1. tmnxOamLspPingCtlNhIntfName equal to TIMETRA-VRTR-MIB::vRtrIfName,
AND
2. TIMETRA-VRTR-MIB::vRtrID equal to 1.
Otherwise, the test will fail.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlNhAddressType | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.14 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspPingCtlNhAddressType specifies the type of Internet address stored in tmnxOamLspPingCtlNhAddress. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlNhAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.15 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspPingCtlNhAddress specifies the interface address to the next hop which will be used to transmit the LSP ping. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlTestSubMode | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.16 | TmnxOamLspPingTestSubMode | RW | |
column · TmnxOamLspPingTestSubMode · read-write · current The value of tmnxOamLspPingCtlTestSubMode specifies the type of LSP ping test to perform. When this object is 'unspecified(1)', the type of LSP ping test to be performed is determined when the test is started, from the set of tmnxOamLspPingCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamLspPingCtlTestSubMode and the type of the LSP to be tested, the test will fail. For example, if tmnxOamLspPingCtlTestSubMode is 'static(2)', and tmnxOamLspPingCtlLspName refers to an LSP with TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to 'mplsTp(7)', the test will fail. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlMplsTpPathType | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.17 | TmnxOamMplsTpPathType | RW | |
column · TmnxOamMplsTpPathType · read-write · current The value of tmnxOamLspPingCtlMplsTpPathType specifies the type of the MPLS-TP path to be tested. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlMplsTpGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.18 | TmnxMplsTpGlobalID | RW | |
column · TmnxMplsTpGlobalID · read-write · current The value of tmnxOamLspPingCtlMplsTpGlobalId specifies the target MPLS-TP Global Identifier to be used for the test. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlMplsTpNodeId | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.19 | TmnxMplsTpNodeID | RW | |
column · TmnxMplsTpNodeID · read-write · current The value of tmnxOamLspPingCtlMplsTpNodeId specifies the target MPLS-TP Node Identifier to be used for the test. A value of zero indicates that no Node Identifier has been configured. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlAssocChannel | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.20 | TmnxOamLspAssocChannel | RW | |
column · TmnxOamLspAssocChannel · read-write · current The value of tmnxOamLspPingCtlAssocChannel specifies the launched echo request's usage of the Associated Channel (ACH) mechanism, when testing an MPLS-TP LSP. When tmnxOamLspPingCtlTestSubMode is 'static(2)', the default value for tmnxOamLspPingCtlAssocChannel is 'nonIp(2)'. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlForce | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.21 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamLspPingCtlForce specifies whether or not to force the transmission of the 'lspPing' request PDU(s). If tmnxOamLspPingCtlForce is 'true(1)', the test will proceed and request PDU(s) will be sent regardless of the local operational status of the tested LSP path. If tmnxOamLspPingCtlForce is 'false(2)', the test will fail immediately when the local operational status of the tested LSP path is down. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlIgpInstance | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.22 | TmnxIgpInstance | RW | |
column · TmnxIgpInstance · read-write · current The value of tmnxOamLspPingCtlIgpInstance specifies the Interior Gateway Protocol (IGP) instance to be used for the test. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlSrPlcyColor | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.23 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamLspPingCtlSrPlcyColor specifies the Segment Routing (SR) policy color to be used for the test. A color associates an SR policy with an intent (e.g. low latency). tmnxOamLspPingCtlSrPlcyColor, tmnxOamLspPingCtlSrPlcyEndPtAddT, and tmnxOamLspPingCtlSrPlcyEndPtAddr must identify a known SR policy. Otherwise, the test will fail. The color of a static SR policy is defined using TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyColor. When configuring an SR policy LSP ping test, the following objects must all be set in one snmpset PDU: tmnxOamLspPingCtlTestSubMode = 'srPolicy(7)', tmnxOamLspPingCtlSrPlcyColor, tmnxOamLspPingCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)', tmnxOamLspPingCtlSrPlcyEndPtAddr. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlSrPlcyEndPtAddT | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.24 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspPingCtlSrPlcyEndPtAddT specifies the type of IP address stored in tmnxOamLspPingCtlSrPlcyEndPtAddr. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlSrPlcyEndPtAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.25 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspPingCtlSrPlcyEndPtAddr specifies the Segment
Routing (SR) policy endpoint address to be used for the test.
tmnxOamLspPingCtlSrPlcyColor, tmnxOamLspPingCtlSrPlcyEndPtAddT, and
tmnxOamLspPingCtlSrPlcyEndPtAddr must identify a known SR policy.
Otherwise, the test will fail. The endpoint of a static SR policy
is defined using
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddrType
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddr.
When configuring an SR policy LSP ping test, the following objects
must all be set in one snmpset PDU:
tmnxOamLspPingCtlTestSubMode = 'srPolicy(7)',
tmnxOamLspPingCtlSrPlcyColor,
tmnxOamLspPingCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)',
tmnxOamLspPingCtlSrPlcyEndPtAddr.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlSrPlcySegList | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.26 | Unsigned32 (0..32) | RW | |
column · Unsigned32 (0..32) · read-write · current The value of tmnxOamLspPingCtlSrPlcySegList specifies the Segment Routing (SR) policy segment list to be used for the test. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspPingCtlFlexAlgo | 1.3.6.1.4.1.6527.3.1.2.11.1.9.1.27 | Unsigned32 (0 | 128..255) | RW | |
column · Unsigned32 (0 | 128..255) · read-write · current The value of tmnxOamLspPingCtlFlexAlgo specifies the Flexible Algorithm to use for the test. Zero indicates no Flexible Algorithm is specified. The supported object combinations for LSP ping tests are listed in the tmnxOamLspPingCtlTable DESCRIPTION clause. tmnxOamLspPingCtlFlexAlgo must not be changed away from default for an SAA test. | ||||
| TtmnxOamVprnPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.10 | NA | ||
table · not-accessible · current tmnxOamVprnPingCtlTable contains configuration information for 'vprnPing' tests. | ||||
| RtmnxOamVprnPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.10.1 | NA | ||
row · not-accessible · current tmnxOamVprnPingCtlEntry contains configuration information for one 'vprnPing' test. SROS creates a row when tmnxOamPingCtlTestMode is set to 'vprnPing'. SROS destroys a row when the corresponding tmnxOamPingCtlTable row is destroyed. | ||||
| CtmnxOamVprnPingCtlSourceIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.10.1.1 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamVprnPingCtlSrcAddrType and tmnxOamVprnPingCtlSrcAddress. | ||||
| CtmnxOamVprnPingCtlReplyControl | 1.3.6.1.4.1.6527.3.1.2.11.1.10.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamVprnPingCtlReplyControl is 'true', the OAM ping response is returned using the control plane. If its value is 'false', the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'vprnPing'. | ||||
| CtmnxOamVprnPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.10.1.3 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'vprnPing'. While performing the test with a TTL of 1 no responses should ever be expected.
| ||||
| CtmnxOamVprnPingCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.10.1.4 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVprnPingCtlSrcAddrType specifies the Internet address type stored in tmnxOamVprnPingCtlSrcAddress. | ||||
| CtmnxOamVprnPingCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.10.1.5 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVprnPingCtlSrcAddress specifies the Internet address to be used as the source for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of 'vprnPing'. This parameter is required. | ||||
| TtmnxOamAtmPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.11 | NA | obsolete | |
table · not-accessible · obsolete This object was marked obsolete in SROS Release 23.3. tmnxOamAtmPingCtlTable contains configuration information for 'atmPing' tests. | ||||
| RtmnxOamAtmPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.11.1 | NA | obsolete | |
row · not-accessible · obsolete tmnxOamAtmPingCtlEntry contains configuration information for one 'atmPing' test. SROS creates a row when tmnxOamPingCtlTestMode is set to 'atmPing'. SROS destroys a row when the corresponding tmnxOamPingCtlTable row is destroyed. | ||||
| CtmnxOamAtmPingCtlPortId | 1.3.6.1.4.1.6527.3.1.2.11.1.11.1.1 | TmnxPortID | RC | obsolete |
column · TmnxPortID · read-create · obsolete The value of tmnxOamAtmPingCtlPortId is the ID of the access port of the target VC. This parameter is required. | ||||
| CtmnxOamAtmPingCtlVpi | 1.3.6.1.4.1.6527.3.1.2.11.1.11.1.2 | AtmVpIdentifier | RC | obsolete |
column · AtmVpIdentifier · read-create · obsolete The value of tmnxOamAtmPingCtlVpi is the VPI of the VC used to send the OAM ATM ping. This is a required parameter. | ||||
| CtmnxOamAtmPingCtlVci | 1.3.6.1.4.1.6527.3.1.2.11.1.11.1.3 | AtmVcIdentifier | RC | obsolete |
column · AtmVcIdentifier · read-create · obsolete The value of tmnxOamAtmPingCtlVci is the VCI of the VC used to send the OAM ATM ping. This is a required parameter. | ||||
| CtmnxOamAtmPingCtlLpbkLocation | 1.3.6.1.4.1.6527.3.1.2.11.1.11.1.4 | OCTET STRING (SIZE (16)) | RC | obsolete |
column · OCTET STRING (SIZE (16)) · read-create · obsolete The value of tmnxOamAtmPingCtlLpbkLocation specifies the Loopback Location ID used in the ATM OAM loopback cell. If all bits in the Loopback Location ID are '1', the destination of the OAM ATM ping is the far-end destination of the VC. Otherwise the cell is destined to a specific ATM node in the ATM network. This is an optional parameter. | ||||
| CtmnxOamAtmPingCtlSegment | 1.3.6.1.4.1.6527.3.1.2.11.1.11.1.5 | INTEGER | RC | obsolete |
column · INTEGER · read-create · obsolete The value of tmnxOamAtmPingCtlSegment determines if the ATM OAM loopback cell is destined to the first segment going in the line direction or the PVCC's connection endpoint.
| ||||
| TtmnxOamMfibPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.12 | NA | ||
table · not-accessible · current tmnxOamMfibPingCtlTable contains configuration information for 'mfibPing' tests. | ||||
| RtmnxOamMfibPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1 | NA | ||
row · not-accessible · current tmnxOamMfibPingCtlEntry contains configuration information for one 'mfibPing' test. SROS creates a row when tmnxOamPingCtlTestMode is set to 'mfibPing'. SROS destroys a row when the corresponding tmnxOamPingCtlTable row is destroyed. | ||||
| CtmnxOamMfibPingCtlSourceIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.1 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMfibPingCtlSrcAddrType and tmnxOamMfibPingCtlSrcAddress. | ||||
| CtmnxOamMfibPingCtlDestIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.2 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMfibPingCtlDestAddrType and tmnxOamMfibPingCtlDestAddress. | ||||
| CtmnxOamMfibPingCtlReplyControl | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamMfibPingCtlReplyControl is 'true', the OAM ping response is returned using the control plane. If its value is 'false', the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'mfibPing'. | ||||
| CtmnxOamMfibPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.4 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'mfibPing'. While performing the test with a TTL of 1 no responses should ever be expected.
| ||||
| CtmnxOamMfibPingCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.5 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamMfibPingCtlSrcAddrType specifies the Internet address type stored in tmnxOamMfibPingCtlSrcAddress. | ||||
| CtmnxOamMfibPingCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamMfibPingCtlSrcAddress specifies the Internet address to be used as the source for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of 'mfibPing' and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros, in which case this parameter is required. If tmnxOamPingCtlTestMode is different from 'mfibPing' this field is ignored. | ||||
| CtmnxOamMfibPingCtlDestAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.7 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamMfibPingCtlDestAddrType specifies the Internet multicast address type stored in tmnxOamMfibPingCtlDestAddress. | ||||
| CtmnxOamMfibPingCtlDestAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.8 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamMfibPingCtlDestAddress specifies the Internet multicast address to be used as the destination for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of 'mfibPing' and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros, in which case this parameter is required. If tmnxOamPingCtlTestMode is different from 'mfibPing' this field is ignored. | ||||
| CtmnxOamMfibPingCtlDestMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.12.1.9 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamMfibPingCtlDestMacAddr specifies the IPv6 multicast MAC address to be used as the destination for performing an OAM ping operation when tmnxOamPingCtlTestMode has a value of 'mfibPing' and objects tmnxOamMfibPingCtlSrcAddrType and tmnxOamMfibPingCtlDestAddrType have a value of 'unknown (0)', in which case this parameter is required. If tmnxOamPingCtlTestMode is different from 'mfibPing' this field is ignored. | ||||
| TtmnxOamCpePingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.13 | NA | ||
table · not-accessible · current tmnxOamCpePingCtlTable contains configuration information for 'cpePing' tests. | ||||
| RtmnxOamCpePingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1 | NA | ||
row · not-accessible · current tmnxOamCpePingCtlEntry contains configuration information for one 'cpePing' test. SROS creates a row when tmnxOamPingCtlTestMode is set to 'cpePing'. SROS destroys a row when the corresponding tmnxOamPingCtlTable row is destroyed. | ||||
| CtmnxOamCpePingCtlSourceIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1.1 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamCpePingCtlSrcAddrType and tmnxOamCpePingCtlSrcAddress. | ||||
| CtmnxOamCpePingCtlSendControl | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamCpePingCtlSendControl specifies whether the outbound OAM ping packet will use the data plane or the control plane. When the value is 'false', the packet is sent using the data plane. As of SROS release 13.0 R1, a test cannot be started if tmnxOamCpePingCtlSendControl is 'true'. A test is started using tmnxOamPingCtlAdminStatus. This object will be marked obsolete in a future release. | ||||
| CtmnxOamCpePingCtlReplyControl | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamCpePingCtlReplyControl is 'true', the OAM ping response is returned using the control plane. If its value is 'false', the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'cpePing'. | ||||
| CtmnxOamCpePingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1.4 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current Specifies the vc-label time-to-live value. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'cpePing'. When performing the test with a TTL=1, the cpe-ping is only done to the local SAP(s).
| ||||
| CtmnxOamCpePingCtlSrceMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1.5 | MacAddress | RW | |
column · MacAddress · read-write · current When set to a non zero value, the system will use the value as the source MAC address in the ARP request that will be sent to the CPE. If set to 0, the MAC address configured for the CPM is used. This object is optional and is not relevant when tmnxOamPingCtlTestMode has a value other than 'cpePing'. | ||||
| CtmnxOamCpePingCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1.6 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamCpePingCtlSrcAddrType specifies the Internet address type stored in tmnxOamCpePingCtlSrcAddress. | ||||
| CtmnxOamCpePingCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.13.1.7 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamCpePingCtlSrcAddress specifies the Internet address to be used as the source for performing a CPE ping operation when tmnxOamPingCtlTestMode has a value of 'cpePing'. This parameter is required for 'cpePing' and ignored in all other cases. | ||||
| TtmnxOamMRInfoRespTable | 1.3.6.1.4.1.6527.3.1.2.11.1.14 | NA | ||
table · not-accessible · current tmnxOamMRInfoRespTable contains node-level information provided by destination nodes of successful 'mrInfo' tests. | ||||
| RtmnxOamMRInfoRespEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.14.1 | NA | ||
row · not-accessible · current tmnxOamMRInfoRespEntry contains node-level information provided by the destination node of a successful 'mrInfo' test. A row is created when node-level information is provided by a destination node. A row is destroyed when the corresponding tmnxOamPingHistoryTable row is destroyed. | ||||
| CtmnxOamMRInfoRespCapabilities | 1.3.6.1.4.1.6527.3.1.2.11.1.14.1.1 | Bits | RO | |
column · Bits · read-only · current tmnxOamMRInfoRespCapabilities indicates the capabilities of the router responding to the mrinfo request: leaf(0) This is a leaf router prune(1) This router understands pruning genid(2) This router sends Generation Id's mtrace(3) This router handles Mtrace requests snmp(4) This router supports the DVMRP MIB
| ||||
| CtmnxOamMRInfoRespMinorVersion | 1.3.6.1.4.1.6527.3.1.2.11.1.14.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current tmnxOamMRInfoRespMinorVersion indicates the minor software version on the router responding to the mrinfo request. | ||||
| CtmnxOamMRInfoRespMajorVersion | 1.3.6.1.4.1.6527.3.1.2.11.1.14.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current tmnxOamMRInfoRespMajorVersion indicates the major software version on the router responding to the mrinfo request. | ||||
| CtmnxOamMRInfoRespNumInterfaces | 1.3.6.1.4.1.6527.3.1.2.11.1.14.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current tmnxOamMRInfoRespNumInterfaces indicates the number of interfaces in the mrinfo response packet. These interfaces are listed in the tmnxOamMRInfoRespIfTable. | ||||
| TtmnxOamMRInfoRespIfTable | 1.3.6.1.4.1.6527.3.1.2.11.1.15 | NA | ||
table · not-accessible · current tmnxOamMRInfoRespIfTable contains interface-level information provided by destination nodes of successful 'mrInfo' tests. | ||||
| RtmnxOamMRInfoRespIfEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1 | NA | ||
row · not-accessible · current tmnxOamMRInfoRespIfEntry contains interface-level information provided by the destination node of a successful 'mrInfo' test. Rows are created when interface-level information is provided by a destination node. Rows are destroyed when the corresponding tmnxOamMRInfoRespTable row is destroyed. | ||||
| CtmnxOamMRInfoRespIfIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current tmnxOamMRInfoRespIfIndex is the index into the tmnxOamMRInfoRespIfTable. The mrinfo response packet has the router's interfaces on which multicast is enabled. tmnxOamMRInfoRespIfIndex is used to identify those interfaces. | ||||
| CtmnxOamMRInfoRespIfAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.2 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMRInfoRespIfAddrType and tmnxOamMRInfoRespIfAddr. | ||||
| CtmnxOamMRInfoRespIfMetric | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current tmnxOamMRInfoRespIfMetric indicates the metric on the interface. | ||||
| CtmnxOamMRInfoRespIfThreshold | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current tmnxOamMRInfoRespIfThreshold indicates the threshold on the interface. | ||||
| CtmnxOamMRInfoRespIfFlags | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.5 | Bits | RO | |
column · Bits · read-only · current tmnxOamMRInfoRespIfFlags indicates the flags associated with an interface: tunnel(0) Neighbor reached via tunnel srcrt(1) Tunnel uses IP source routing reserved1(2) No longer used reserved2(3) No longer used down(4) Operational status down disabled(5) Administrative status down querier(6) Querier for interface leaf(7) No downstream neighbors on interface
| ||||
| CtmnxOamMRInfoRespIfNbrCount | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current tmnxOamMRInfoRespIfNbrCount indicates the number of multicast neighbors on the interface. The neighbors are listed in the tmnxOamMRInfoRespIfNbrTable. | ||||
| CtmnxOamMRInfoRespIfAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.7 | InetAddressType | RO | |
column · InetAddressType · read-only · current tmnxOamMRInfoRespIfAddrType indicates the Internet address type stored in tmnxOamMRInfoRespIfAddr. | ||||
| CtmnxOamMRInfoRespIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.15.1.8 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current tmnxOamMRInfoRespIfAddr indicates the Internet address of the interface on the router responding to the mrinfo request. | ||||
| TtmnxOamMRInfoRespIfNbrTable | 1.3.6.1.4.1.6527.3.1.2.11.1.16 | NA | ||
table · not-accessible · current tmnxOamMRInfoRespIfNbrTable contains neighbor-level information provided by destination nodes of successful 'mrInfo' tests. | ||||
| RtmnxOamMRInfoRespIfNbrEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.16.1 | NA | ||
row · not-accessible · current tmnxOamMRInfoRespIfNbrEntry contains neighbor-level information provided by the destination node of a successful 'mrInfo' test. Rows are created when neighbor-level information is provided by a destination node. Rows are destroyed when the corresponding tmnxOamMRInfoRespIfTable row is destroyed. | ||||
| CtmnxOamMRInfoRespIfNbrIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.16.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current tmnxOamMRInfoRespIfNbrIndex is used to identify the multicast neighbor on the interface tmnxOamMRInfoRespIfIndex. | ||||
| CtmnxOamMRInfoRespIfNbrAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.16.1.2 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMRInfoRespIfNbrAddrType and tmnxOamMRInfoRespIfNbrAddr. | ||||
| CtmnxOamMRInfoRespIfNbrAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.16.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current tmnxOamMRInfoRespIfNbrAddrType indicates the Internet address type stored in tmnxOamMRInfoRespIfNbrAddr. | ||||
| CtmnxOamMRInfoRespIfNbrAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.16.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current tmnxOamMRInfoRespIfNbrAddr indicates the Internet address of the neighbor on the interface. | ||||
| TtmnxOamVccvPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.17 | NA | ||
table · not-accessible · current Each row in tmnxOamVccvPingCtlTable contains the VCCV-specific
configuration information needed to launch a VCCV (Virtual Circuit
Connectivity Verification) ping test. The rest of the configuration
information needed to launch the test resides in the corresponding row
of tmnxOamPingCtlTable.
Four types of VCCV ping tests are supported: AII Type 2, FEC-128
Pseudowire, Spoke SDP FEC, and Transport Profile Static. AII Type 2
and Spoke SDP FEC offer two ways to specify a VCCV ping FEC-129
Pseudowire test.
The following table has a row for each VCCV ping test type, showing
the mandatory and optional objects applicable to the test type.
Abbreviated VCCV ping test type names are used.
Test
Type Mandatory Objects Optional Objects
------ ------------------------------ ---------------------------------
aiiTY2 tmnxOamVccvPingCtlSaiiAcId *tmnxOamPingCtlSrcAddrType
tmnxOamVccvPingCtlSaiiGlobalId *tmnxOamPingCtlSrcAddress
tmnxOamVccvPingCtlSaiiPrefix *tmnxOamPingCtlTgtAddrType
tmnxOamVccvPingCtlTaiiAcId *tmnxOamPingCtlTgtAddress
tmnxOamVccvPingCtlTaiiGlobalId tmnxOamVccvPingCtlReplyMode
tmnxOamVccvPingCtlTaiiPrefix
FEC128 tmnxOamVccvPingCtlSdpIdVcId *tmnxOamPingCtlSrcAddrType
*tmnxOamPingCtlSrcAddress
*tmnxOamPingCtlTgtAddrType
*tmnxOamPingCtlTgtAddress
*tmnxOamVccvPingCtlPwId
tmnxOamVccvPingCtlReplyMode
^tmnxOamVccvPingCtlTestSubMode
^tmnxOamVccvPingCtlSrcAddrType
^tmnxOamVccvPingCtlSrcAddress
^tmnxOamVccvPingCtlTgtAddrType
^tmnxOamVccvPingCtlTgtAddress
^tmnxOamVccvPingCtlPwId
#tmnxOamVccvPingCtlSwitTgtFecType
#tmnxOamVccvPgTgStaticCtlAgi
#tmnxOamVccvPgTgStaticCtlSaiiGlbl
#tmnxOamVccvPgTgStaticCtlSaiiNode
#tmnxOamVccvPgTgStaticCtlSaiiAcId
#tmnxOamVccvPgTgStaticCtlTaiiGlbl
#tmnxOamVccvPgTgStaticCtlTaiiNode
#tmnxOamVccvPgTgStaticCtlTaiiAcId
sdpFEC tmnxOamVccvPingCtlSpokeSdpId *tmnxOamPingCtlSrcAddrType
*tmnxOamPingCtlSrcAddress
*tmnxOamPingCtlTgtAddrType
*tmnxOamPingCtlTgtAddress
#tmnxOamVccvPingCtlSaiiAcId
#tmnxOamVccvPingCtlSaiiGlobalId
#tmnxOamVccvPingCtlSaiiPrefix
#tmnxOamVccvPingCtlTaiiAcId
#tmnxOamVccvPingCtlTaiiGlobalId
#tmnxOamVccvPingCtlTaiiPrefix
tmnxOamVccvPingCtlReplyMode
TPST tmnxOamVccvPingCtlSdpIdVcId *tmnxOamPingCtlSrcAddrType
tmnxOamVccvPingCtlTestSubMode *tmnxOamPingCtlSrcAddress
tmnxOamVccvPingCtlAssocChannel
#tmnxOamVccvPingCtlMplsTpGlobalId
#tmnxOamVccvPingCtlMplsTpNodeId
^tmnxOamVccvPingCtlSwitTgtFecType
^tmnxOamVccvPgTgFec128CtlSrcAddrT
^tmnxOamVccvPgTgFec128CtlSrcAddr
^tmnxOamVccvPgTgFec128CtlDstAddrT
^tmnxOamVccvPgTgFec128CtlDstAddr
^tmnxOamVccvPgTgFec128CtlPwId
^tmnxOamVccvPgTgFec128CtlPwType
ALL N/A tmnxOamPingCtlFcName
tmnxOamPingCtlInterval
tmnxOamPingCtlProbeCount
tmnxOamPingCtlProfile
tmnxOamPingCtlSize
tmnxOamPingCtlTimeOut
tmnxOamVccvPingCtlTtl
------ ------------------------------ ---------------------------------
In the table above,
1. The optional objects in the ALL row apply to all four VCCV ping
test types.
2. The characters '*', '#', and '^' each mark an independent set of
optional objects which must all be specified (not necessarily in
one snmpset PDU), or must all be unspecified.
When an object combination other than a combination listed above is
specified, values will be rejected or ignored, or the test will fail. | ||||
| RtmnxOamVccvPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1 | NA | ||
row · not-accessible · current The system creates a row in tmnxOamVccvPingCtlTable when a row is created in tmnxOamPingCtlTable with tmnxOamPingCtlTestMode set to 'vccvPing'. The system deletes a row in tmnxOamVccvPingCtlTable when the corresponding row in tmnxOamPingCtlTable is deleted. | ||||
| CtmnxOamVccvPingCtlSdpIdVcId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.1 | SdpBindId | RW | |
column · SdpBindId · read-write · current The value of tmnxOamVccvPingCtlSdpIdVcId specifies the SDP binding of the pseudowire to be tested by a VCCV ping test. The all-zeros value indicates an unused SDP binding. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlReplyMode | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamVccvPingCtlReplyMode specifies the band to be used
by the echo reply PDU.
ip(2) out-of-band reply
controlChannel(4) inband reply
The supported object combinations for VCCV ping tests are listed in
the tmnxOamVccvPingCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamVccvPingCtlPwId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.3 | TmnxVcIdOrNone | RW | |
column · TmnxVcIdOrNone · read-write · current The value of tmnxOamVccvPingCtlPwId specifies the pseudowire identifier to be used when performing a VCCV ping test on a FEC 128 pseudowire. The pseudowire Id is a non-zero 32-bit connection ID required by FEC 128, as defined in RFC 4379. A value of zero indicates that no pseudowire Id has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.4 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current The value of tmnxOamVccvPingCtlTtl specifies the time-to-live value for the vc-label of the echo request message. The outer label TTL is set to 255, regardless of this value. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamVccvPingCtlSpokeSdpId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.5 | TmnxSpokeSdpIdOrZero | RW | |
column · TmnxSpokeSdpIdOrZero · read-write · current The value of tmnxOamVccvPingCtlSpokeSdpId specifies the spoke SDP identifier to be used when performing a VCCV ping test on a FEC 129 pseudowire. A value of zero indicates that no spoke SDP identifier has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlSaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.6 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvPingCtlSaiiGlobalId specifies the global identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no global identifier has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlSaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvPingCtlSaiiPrefix specifies the prefix of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no prefix has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvPingCtlSaiiAcId specifies the attachment circuit identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no attachment circuit identifier has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlTaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.9 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvPingCtlTaiiGlobalId specifies the global identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no global identifier has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlTaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.10 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvPingCtlTaiiPrefix specifies the prefix of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no prefix has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.11 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvPingCtlTaiiAcId specifies the attachment circuit identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no attachment circuit identifier has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlMplsTpGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.12 | TmnxMplsTpGlobalID | RW | |
column · TmnxMplsTpGlobalID · read-write · current The value of tmnxOamVccvPingCtlMplsTpGlobalId specifies the target MPLS-TP Global Identifier to be used for the test. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlMplsTpNodeId | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.13 | TmnxMplsTpNodeID | RW | |
column · TmnxMplsTpNodeID · read-write · current The value of tmnxOamVccvPingCtlMplsTpNodeId specifies the target MPLS-TP Node Identifier to be used for the test. A value of zero indicates that no Node Identifier has been configured. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlTestSubMode | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.14 | TmnxOamVccvPingTestSubMode | RW | |
column · TmnxOamVccvPingTestSubMode · read-write · current The value of tmnxOamVccvPingCtlTestSubMode specifies the type of VCCV ping test to perform. When this object is 'unspecified(1)', the type of VCCV ping test to be performed is determined when the test is started, from the set of tmnxOamVccvPingCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamVccvPingCtlTestSubMode and the type of the pseudowire to be tested, the test will fail. For example, if tmnxOamVccvPingCtlTestSubMode is 'static(2)', and there is no TIMETRA-SDP-MIB::sdpBindPwPathTable row for the test's SDP binding, the test will fail. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlAssocChannel | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.15 | TmnxOamVccvAssocChannel | RW | |
column · TmnxOamVccvAssocChannel · read-write · current The value of tmnxOamVccvPingCtlAssocChannel specifies the launched echo request's usage of the Associated Channel (ACH) mechanism, when performing an MPLS-TP VCCV ping test. When tmnxOamVccvPingCtlTestSubMode is 'static(2)', the default value for tmnxOamVccvPingCtlAssocChannel is 'nonIp(2)'. The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlSwitTgtFecType | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.16 | TmnxOamVccvSwitTgtFecType | RW | |
column · TmnxOamVccvSwitTgtFecType · read-write · current The value of tmnxOamVccvPingCtlSwitTgtFecType specifies the type of downstream FEC (Forward Equivalence Class) segment to be tested. This object must be set to a non-default value when the path to be tested starts with a FEC segment, and switches to a FEC segment with a different type. For example, if the path to be tested starts with a static FEC, and switches to FEC 128, this object must be set to 'fec128(2)'. | ||||
| CtmnxOamVccvPingCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.17 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVccvPingCtlSrcAddrType specifies the address type of tmnxOamVccvPingCtlSrcAddress. | ||||
| CtmnxOamVccvPingCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.18 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVccvPingCtlSrcAddress specifies the source address for the VCCV ping test. The object holding the source address varies with the test's configuration, as specified in the following table. tmnxOamVccvPingCtlTestSubMode SAA? Source Address Object ----------------------------- ---- ---------------------------- unspecified(1) N|Y tmnxOamPingCtlSrcAddress static(2) N|Y tmnxOamPingCtlSrcAddress fec128(3) N tmnxOamPingCtlSrcAddress fec128(3) Y tmnxOamVccvPingCtlSrcAddress The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvPingCtlTgtAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.19 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVccvPingCtlTgtAddrType specifies the address type of tmnxOamVccvPingCtlTgtAddress. | ||||
| CtmnxOamVccvPingCtlTgtAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.17.1.20 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVccvPingCtlTgtAddress specifies the destination address for the VCCV ping test. The object holding the destination address varies with the test's configuration, as specified in the following table. tmnxOamVccvPingCtlTestSubMode SAA? Destination Address Object ----------------------------- ---- ---------------------------- unspecified(1) N|Y tmnxOamPingCtlTgtAddress static(2) not supported fec128(3) N tmnxOamPingCtlTgtAddress fec128(3) Y tmnxOamVccvPingCtlTgtAddress The supported object combinations for VCCV ping tests are listed in the tmnxOamVccvPingCtlTable DESCRIPTION clause. | ||||
| TtmnxOamIcmpPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.18 | NA | ||
table · not-accessible · current tmnxOamIcmpPingCtlTable (along with tmnxOamPingCtlTable) contains the
configuration information for ICMP ping tests.
Two types of 'icmpPing' tests are supported, as configured
using tmnxOamIcmpPingCtlTestSubMode. The objects which can be
configured away from default for each type are shown in the following
table.
Test Sub Mode Configurable Objects
---------------- --------------------------------
'unspecified(1)' tmnxOamIcmpPingCtlBypassRouting
tmnxOamIcmpPingCtlDSField
tmnxOamIcmpPingCtlDoNotFragment
tmnxOamIcmpPingCtlEgrIfName
tmnxOamIcmpPingCtlNhAddrType
tmnxOamIcmpPingCtlNhAddress
tmnxOamIcmpPingCtlPattern
tmnxOamIcmpPingCtlRapid
tmnxOamIcmpPingCtlTtl
tmnxOamPingCtlAdminStatus
tmnxOamPingCtlFcName
tmnxOamPingCtlInterval
tmnxOamPingCtlProbeCount
tmnxOamPingCtlRouterInstanceName
tmnxOamPingCtlRowStatus
tmnxOamPingCtlServiceId
tmnxOamPingCtlSize
tmnxOamPingCtlSrcAddrType
tmnxOamPingCtlSrcAddress
tmnxOamPingCtlSubscriberName
tmnxOamPingCtlTestMode
tmnxOamPingCtlTgtAddrType
tmnxOamPingCtlTgtAddress
tmnxOamPingCtlTimeOut
tmnxOamPingCtlVRtrID
'srv6Policy(2)' tmnxOamIcmpPingCtlDoNotFragment
tmnxOamIcmpPingCtlPattern
tmnxOamIcmpPingCtlRapid
tmnxOamIcmpPingCtlSrV6PyColor
tmnxOamIcmpPingCtlSrV6PyEndPtAdT
tmnxOamIcmpPingCtlSrV6PyEndPtAdd
tmnxOamIcmpPingCtlSrV6PySegList
tmnxOamIcmpPingCtlTtl
tmnxOamPingCtlAdminStatus
tmnxOamPingCtlFcName
tmnxOamPingCtlInterval
tmnxOamPingCtlProbeCount
tmnxOamPingCtlRowStatus
tmnxOamPingCtlSize
tmnxOamPingCtlTestMode
tmnxOamPingCtlTimeOut
tmnxOamIcmpPingCtlSrV6PyPathOwnr
tmnxOamIcmpPingCtlSrV6PyPrefnce
tmnxOamIcmpPingCtlSrV6PyRoutDist
The following objects cannot be changed away from default
for an SAA test (as created using tmnxOamSaaCtlRowStatus):
tmnxOamIcmpPingCtlSrV6PyColor
tmnxOamIcmpPingCtlSrV6PyEndPtAdT
tmnxOamIcmpPingCtlSrV6PyEndPtAdd
tmnxOamIcmpPingCtlSrV6PySegList
tmnxOamIcmpPingCtlTestSubMode
tmnxOamIcmpPingCtlSrV6PyPathOwnr
tmnxOamIcmpPingCtlSrV6PyPrefnce
tmnxOamIcmpPingCtlSrV6PyRoutDist | ||||
| RtmnxOamIcmpPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1 | NA | ||
row · not-accessible · current tmnxOamIcmpPingCtlEntry (along with tmnxOamPingCtlEntry) contains the configuration information for an ICMP ping test. A row is created when the corresponding tmnxOamPingCtlTestMode is set to 'icmpPing'. A row is destroyed when the corresponding tmnxOamPingCtlTable row is destroyed (using tmnxOamPingCtlRowStatus). The values in a particular row in this table cannot be changed when the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'. | ||||
| CtmnxOamIcmpPingCtlRapid | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamIcmpPingCtlRapid specifies whether or not to send ICMP ping probes in rapid sequence. Changing tmnxOamIcmpPingCtlRapid from 'false(2)' to 'true(1)' implicitly sets tmnxOamPingCtlIntervalUnits to 'centiseconds(2)'. For example, if tmnxOamPingCtlInterval is 1, that makes the interval for the test 0.01 seconds. Changing tmnxOamIcmpPingCtlRapid from 'true(1)' to 'false(2)' implicitly sets tmnxOamPingCtlIntervalUnits to 'seconds(1)'. For example, if tmnxOamPingCtlInterval is 1, that makes the interval for the test 1 second. tmnxOamIcmpPingCtlRapid = 'true(1)' and tmnxOamSaaCtlContinuous = 'true(1)' is an unsupported combination. | ||||
| CtmnxOamIcmpPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.2 | Unsigned32 (1..128) | RW | |
column · Unsigned32 (1..128) · read-write · current The value of tmnxOamIcmpPingCtlTtl specifies the initial time-to-live value for the ICMP ping packets. | ||||
| CtmnxOamIcmpPingCtlDSField | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.3 | Unsigned32 (0..255) | RW | |
column · Unsigned32 (0..255) · read-write · current The value of tmnxOamIcmpPingCtlDSField specifies the value to load in the Type of Service (TOS) octet or the Traffic Class (TC) octet of the launched ICMP echo request(s). The TOS octet is a field in the IPv4 packet header. The TC octet is a field in the IPv6 packet header. The value in the TOS or TC octet may influence the route, latency, and/or probability of loss for the echo request (and, by inference, for the associated data flow). This object is optional. | ||||
| CtmnxOamIcmpPingCtlPattern | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.4 | Integer32 (-1 | 0..65535) | RW | |
column · Integer32 (-1 | 0..65535) · read-write · current The value of tmnxOamIcmpPingCtlPattern specifies a two-octet value to be repeated to fill the Data field of the ICMP ping packet. When the value -1 is specified, the Data field will be filled with positional values. | ||||
| CtmnxOamIcmpPingCtlNhAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.5 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamIcmpPingCtlNhAddrType specifies the address type of the tmnxOamIcmpPingCtlNhAddress Internet address. | ||||
| CtmnxOamIcmpPingCtlNhAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamIcmpPingCtlNhAddress specifies the Internet address of the next-hop. Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value. Otherwise, 'inconsistentValue' is returned. | ||||
| CtmnxOamIcmpPingCtlEgrIfIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.7 | InterfaceIndexOrZero | RW | obsolete |
column · InterfaceIndexOrZero · read-write · obsolete This object was marked obsolete in SROS release 21.2 R1. The replacement object is tmnxOamIcmpPingCtlEgrIfName. | ||||
| CtmnxOamIcmpPingCtlBypassRouting | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamIcmpPingCtlBypassRouting specifies whether or not to send the ping request to a host on a directly attached network, bypassing the routing table. Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value. Otherwise, 'inconsistentValue' is returned. | ||||
| CtmnxOamIcmpPingCtlDoNotFragment | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamIcmpPingCtlDoNotFragment specifies whether or not
the IPv4 'DF' (Don't Fragment) bit is set in the ICMP ping packet(s)
launched for the test.
When tmnxOamIcmpPingCtlDoNotFragment is 'true(1)', the 'DF' bit is
set.
This object is significant if:
1. The target address type for the test (i.e.
tmnxOamPingCtlTgtAddrType) is 'ipv4(1)', or
2. tmnxOamPingCtlTgtAddrType is 'dns(16)', and the DNS name resolves
to an IPv4 address.
Otherwise, this object is ignored. | ||||
| CtmnxOamIcmpPingCtlEgrIfName | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.10 | TNamedItemOrEmpty | RW | |
column · TNamedItemOrEmpty · read-write · current The value of tmnxOamIcmpPingCtlEgrIfName specifies the name of the interface to use to transmit the ICMP ping packets. The value provided is accepted whether or not it is a known interface name (validation is done as part of executing the test). Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be set to a non-default value. Otherwise, 'inconsistentValue' is returned. | ||||
| CtmnxOamIcmpPingCtlTestSubMode | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamIcmpPingCtlTestSubMode specifies the type of 'icmpPing' test to perform. 'srv6Policy' specifies each launched packet contains an IPv6 Segment Routing Header (SRH; RFC 8754). 'unspecified' specifies any other 'icmpPing' test. The supported object combinations for 'icmpPing' tests are listed in the tmnxOamIcmpPingCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamIcmpPingCtlSrV6PyColor | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.12 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamIcmpPingCtlSrV6PyColor specifies the Segment Routing (SR) policy color to be used for the test. A color associates an SR policy with an intent (e.g. low latency). tmnxOamIcmpPingCtlSrV6PyColor, tmnxOamIcmpPingCtlSrV6PyEndPtAdT, and tmnxOamIcmpPingCtlSrV6PyEndPtAdd must identify a known SR policy. Otherwise, the test will fail. The color of a static SR policy is defined using TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyColor. When configuring an SR policy 'icmpPing' test, the following objects must all be set in one snmpset PDU: tmnxOamIcmpPingCtlTestSubMode = 'srv6Policy(2)', tmnxOamIcmpPingCtlSrV6PyColor, tmnxOamIcmpPingCtlSrV6PyEndPtAdT = 'ipv6(2)', tmnxOamIcmpPingCtlSrV6PyEndPtAdd. The supported object combinations for 'icmpPing' tests are listed in the tmnxOamIcmpPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpPingCtlSrV6PyEndPtAdT | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.13 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamIcmpPingCtlSrV6PyEndPtAdT specifies the type of IP address stored in tmnxOamIcmpPingCtlSrV6PyEndPtAdd. The supported object combinations for 'icmpPing' tests are listed in the tmnxOamIcmpPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpPingCtlSrV6PyEndPtAdd | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.14 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamIcmpPingCtlSrV6PyEndPtAdd specifies the Segment
Routing (SR) policy endpoint address to be used for the test.
IPv4 addresses are not supported in this release.
tmnxOamIcmpPingCtlSrV6PyColor, tmnxOamIcmpPingCtlSrV6PyEndPtAdT, and
tmnxOamIcmpPingCtlSrV6PyEndPtAdd must identify a known SR policy.
Otherwise, the test will fail. The endpoint of a static SR policy
is defined using
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddrType
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddr.
When configuring an SR policy 'icmpPing' test, the following
objects must all be set in one snmpset PDU:
tmnxOamIcmpPingCtlTestSubMode = 'srv6Policy(2)',
tmnxOamIcmpPingCtlSrV6PyColor,
tmnxOamIcmpPingCtlSrV6PyEndPtAdT = 'ipv6(2)',
tmnxOamIcmpPingCtlSrV6PyEndPtAdd.
The supported object combinations for 'icmpPing' tests are listed in
the tmnxOamIcmpPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpPingCtlSrV6PySegList | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.15 | Unsigned32 (0..32) | RW | |
column · Unsigned32 (0..32) · read-write · current The value of tmnxOamIcmpPingCtlSrV6PySegList specifies the Segment Routing (SR) policy segment list to be used for the test. Zero specifies no segment list is configured. If zero is specified, SROS picks the first usable segment list when the test is started. The supported object combinations for 'icmpPing' tests are listed in the tmnxOamIcmpPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpPingCtlSrV6PyPrefnce | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.16 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamIcmpPingCtlSrV6PyPrefnce specifies the preference
used to identify the SRv6 policy candidate path to be tested.
In accordance with RFC 9256, all in-range values are legitimate (i.e.
there is no value to indicate the preference is absent).
When any one of the following objects is specified, all three
must be specified in the same SNMPSET PDU:
tmnxOamIcmpPingCtlSrV6PyPathOwnr,
tmnxOamIcmpPingCtlSrV6PyPrefnce,
tmnxOamIcmpPingCtlSrV6PyRoutDist.
The supported object combinations for 'icmpPing' tests are listed in
the tmnxOamIcmpPingCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpPingCtlSrV6PyRoutDist | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.17 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamIcmpPingCtlSrV6PyRoutDist specifies the route distinguisher used to identify the SRv6 policy candidate path to be tested. Zero indicates the route distinguisher is absent. The supported object combinations for 'icmpPing' tests are listed in the tmnxOamIcmpPingCtlTable DESCRIPTION clause. See the DESCRIPTION clause for tmnxOamIcmpPingCtlSrV6PyPrefnce for additional information. | ||||
| CtmnxOamIcmpPingCtlSrV6PyPathOwnr | 1.3.6.1.4.1.6527.3.1.2.11.1.18.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamIcmpPingCtlSrV6PyPathOwnr specifies the path owner used to identify the SRv6 policy candidate path to be tested. 'none' indicates the path owner is absent. This object supports a subset of the code points supported by TIMETRA-SR-POLICY-MIB::vRtrSrPlcyPathOwner. The supported object combinations for 'icmpPing' tests are listed in the tmnxOamIcmpPingCtlTable DESCRIPTION clause. See the DESCRIPTION clause for tmnxOamIcmpPingCtlSrV6PyPrefnce for additional information.
| ||||
| TtmnxOamAncpTestCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.19 | NA | ||
table · not-accessible · current tmnxOamAncpTestCtlTable contains configuration information for 'ancpLoopback' tests. | ||||
| RtmnxOamAncpTestCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.19.1 | NA | ||
row · not-accessible · current tmnxOamAncpTestCtlEntry contains configuration information for one 'ancpLoopback' test. SROS creates a row when tmnxOamPingCtlTestMode is set to 'ancpLoopback'. SROS destroys a row when the corresponding tmnxOamPingCtlTable row is destroyed. | ||||
| CtmnxOamAncpTestTarget | 1.3.6.1.4.1.6527.3.1.2.11.1.19.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The object tmnxOamAncpTestTarget specifies how to interpret the value of the object tmnxOamAncpTestTargetId. If set to 'subscriberId', the object tmnxOamAncpTestTargetId is a printable character string which contains the subscriber-id. If set to 'ancpString', the object tmnxOamAncpTestTargetId is a printable character string which contains the ancp-string. If set to 'none', no value is specified, the object tmnxOamAncpTestTargetId is an empty string, and no ancp loopback test can be performed.
| ||||
| CtmnxOamAncpTestTargetId | 1.3.6.1.4.1.6527.3.1.2.11.1.19.1.2 | DisplayString (SIZE (0..63)) | RW | |
column · DisplayString (SIZE (0..63)) · read-write · current The object tmnxOamAncpTestTargetId contains the ID of the subscriber for which the ANCP loopback test must be performed. The content of the field is interpreted as being a subscriber-id of max 32 chars (in case the object tmnxOamAncpTestTarget is set to 'subscriberId'), or as being an ancp-string of max 63 chars (in case the object tmnxOamAncpTestTarget is set to 'ancpString'). | ||||
| CtmnxOamAncpTestcount | 1.3.6.1.4.1.6527.3.1.2.11.1.19.1.3 | Integer32 (0..32) | RW | |
column · Integer32 (0..32) · read-write · current The value of tmnxOamAncpTestcount specifies the number of messages the
access node will use to test the circuit.
If set to 0, the number of messages will be determined by the
access node. Following settings are allowed:
tmnxOamAncpTestcount tmnxOamAncpTestTimeout
0 0
1..32 0
1..32 1..255 | ||||
| CtmnxOamAncpTestTimeout | 1.3.6.1.4.1.6527.3.1.2.11.1.19.1.4 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The value of tmnxOamAncpTestTimeout specifies the number of seconds
the controlling node will wait for a reply. This timeout value is also
sent to the access node. If set to 0, the access node will pick a
default value, while the control node will assume a value of 255
seconds.
Following settings are allowed:
tmnxOamAncpTestcount tmnxOamAncpTestTimeout
0 0
1..32 0
1..32 1..255
| ||||
| TtmnxOamAncpTestHistoryTable | 1.3.6.1.4.1.6527.3.1.2.11.1.20 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM ANCP test. An entry in this table is created when the result of an OAM ANCP test is determined. An entry is removed from this table when its corresponding tmnxOamPingResultsEntry is deleted. | ||||
| RtmnxOamAncpTestHistoryEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.20.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamAncpTestHistoryTable. The first two index elements identify the tmnxOamPingCtlEntry that a tmnxOamAncpTestHistoryTable belongs to. The third index identifies a specific run of the OAM test. The fourth index element selects a single OAM ANCP test result. | ||||
| CtmnxOamAncpHistoryIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.20.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current An entry in this table is created when the result of a OAM ANCP test is determined. The initial 2 instance identifier index values identify the tmnxOamPingCtlEntry that This ANCP test result belongs to. The tmnxOamAncpHistoryIndex element selects a single OAM probe result. The agent starts assigning tmnxOamAncpHistoryIndex values at 1 and wraps after exceeding the maximum possible value as defined by the limit of this object. | ||||
| CtmnxOamAncpHistoryAncpString | 1.3.6.1.4.1.6527.3.1.2.11.1.20.1.2 | DisplayString (SIZE (0..63)) | RO | |
column · DisplayString (SIZE (0..63)) · read-only · current The object tmnxOamAncpHistoryAncpString indicates the value of the ancp string used while running this ANCP test. | ||||
| CtmnxOamAncpHistoryAccNodeCode | 1.3.6.1.4.1.6527.3.1.2.11.1.20.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object tmnxOamAncpHistoryAccNodeCode indicates, if different from 0, the return code received from the ANCP access node. The value of this field corresponds to the error codes defined in the draft-wadhwa-gsmp-l2control-configuration-01: - 0x500 Specified access line does not exist - 0x501 Loopback test timed out - 0x502 Reserved - 0x503 DSL line status showtime - 0x504 DSL line status idle - 0x505 DSL line status silent - 0x506 DSL line status training - 0x507 DSL line integrity error - 0x508 DSLAM resource not available - 0x509 Invalid test parameter | ||||
| CtmnxOamAncpHistoryAccNodeResult | 1.3.6.1.4.1.6527.3.1.2.11.1.20.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The object tmnxOamAncpHistoryAccNodeResult indicates, if different
from 0, the return result received from the ANCP access node.
The value of this field corresponds to the result codes defined in the
draft-wadhwa-gsmp-l2control-configuration-01:
{
- 1: NoSuccessAck
- 2: AckAll
- 3: Success
- 4: Failure
- 5: More
- 6: ReturnReceipt
} | ||||
| CtmnxOamAncpHistoryAccNodeRspStr | 1.3.6.1.4.1.6527.3.1.2.11.1.20.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The object tmnxOamAncpHistoryAccNodeRspStr indicates, if different from the empty string, the OAM-loopback-Test-Response-String received from the access node, as reply to the requested test. | ||||
| TtmnxOamP2mpLspPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.21 | NA | ||
table · not-accessible · current tmnxOamP2mpLspPingCtlTable (along with tmnxOamPingCtlTable and
tmnxOamP2mpLspPingIPAddressTable) contains the configuration
information for Point-to-Multipoint (P2MP) Label Switched Path (LSP)
ping tests.
The following table has a row for each P2MP LSP ping test type,
showing the mandatory and optional configurable objects applicable to
the test type.
Test
Type Mandatory Objects Optional Objects
==== ================================ =================================
LDP tmnxOamP2mpLspPingCtlP2MPId tmnxOamP2mpLspPingCtlOptionalTLV
tmnxOamPingCtlSrcAddrType
tmnxOamPingCtlSrcAddress
tmnxOamP2mpLspPingCtlIpRowStatus
tmnxOamP2mpLspPingCtlIpAddrType
tmnxOamP2mpLspPingCtlIpAddr
---- -------------------------------- ---------------------------------
RSVP tmnxOamP2mpLspPingCtlLspName tmnxOamP2mpLspPingCtlInstName
tmnxOamP2mpLspPingCtlTtl
tmnxOamP2mpLspPingCtlIpRowStatus
tmnxOamP2mpLspPingCtlIpAddrType
tmnxOamP2mpLspPingCtlIpAddr
---- -------------------------------- ---------------------------------
SSM tmnxOamP2mpLspPingCtlGrpAddr tmnxOamPingCtlSrcAddrType
tmnxOamP2mpLspPingCtlGrpAddrType tmnxOamPingCtlSrcAddress
tmnxOamP2mpLspPingCtlSrcAddr tmnxOamPingCtlServiceId
tmnxOamP2mpLspPingCtlSrcAddrType tmnxOamPingCtlVRtrID
tmnxOamP2mpLspPingCtlIpRowStatus
tmnxOamP2mpLspPingCtlIpAddrType
tmnxOamP2mpLspPingCtlIpAddr
---- -------------------------------- ---------------------------------
TREE tmnxOamP2mpLspPingCtlRootAddrTyp tmnxOamPingCtlSrcAddrType
tmnxOamP2mpLspPingCtlRootAddr tmnxOamPingCtlSrcAddress
tmnxOamP2mpLspPingCtlTreeId tmnxOamP2mpLspPingCtlIpRowStatus
tmnxOamP2mpLspPingCtlTreeInstId tmnxOamP2mpLspPingCtlIpAddrType
tmnxOamP2mpLspPingCtlIpAddr
---- -------------------------------- ---------------------------------
ALL tmnxOamPingCtlRowStatus tmnxOamPingCtlFcName
tmnxOamPingCtlTestMode tmnxOamPingCtlProfile
tmnxOamPingCtlSize
tmnxOamPingCtlTimeOut
==== ================================ =================================
where
SSM (Source-Specific Multicast) refers to a P2MP LDP-SSM ping.
TREE refers to a P2MP Segment Routing Tree ping.
ALL refers to all the test types above. | ||||
| RtmnxOamP2mpLspPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1 | NA | ||
row · not-accessible · current tmnxOamP2mpLspPingCtlEntry (along with tmnxOamPingCtlEntry and zero or more tmnxOamP2mpLspPingIPAddressTable rows) contains the configuration information for a P2MP LSP Ping test. A row is created when the corresponding tmnxOamPingCtlTestMode is set to 'p2mpLspPing'. A row is destroyed when the corresponding tmnxOamPingCtlTable row is destroyed (using tmnxOamPingCtlRowStatus). The values in a particular row in this table cannot be changed when the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'. | ||||
| CtmnxOamP2mpLspPingCtlLspName | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.1 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current The value of tmnxOamP2mpLspPingCtlLspName specifies the name of the target RSVP P2MP Labeled Switch Path (LSP) for the test. The LSP name must be defined within the Base router instance (using TIMETRA-MPLS-MIB::vRtrMplsLspName). | ||||
| CtmnxOamP2mpLspPingCtlInstName | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.2 | TNamedItemOrEmpty | RW | |
column · TNamedItemOrEmpty · read-write · current The value of tmnxOamP2mpLspPingCtlInstName specifies the P2MP instance name to be used for the test. The value must match a configured TIMETRA-MPLS-MIB::vRtrMplsP2mpInstName. | ||||
| CtmnxOamP2mpLspPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.3 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current The value of tmnxOamP2mpLspPingCtlTtl specifies the time-to-live to be copied into the TTL field of the launched packet's outermost MPLS label.
| ||||
| CtmnxOamP2mpLspPingCtlP2MPId | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.4 | Unsigned32 (0 | 1..4294967295) | RW | |
column · Unsigned32 (0 | 1..4294967295) · read-write · current The value of tmnxOamP2mpLspPingCtlP2MPId specifies the identifier of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for the test. The value must match a configured TIMETRA-VRTR-MIB::vRtrLdpTunIfP2mpId. | ||||
| CtmnxOamP2mpLspPingCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.5 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamP2mpLspPingCtlSrcAddrType specifies the address type of tmnxOamP2mpLspPingCtlSrcAddr. | ||||
| CtmnxOamP2mpLspPingCtlSrcAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamP2mpLspPingCtlSrcAddr specifies the source address of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for the test. A unicast address must be specified. | ||||
| CtmnxOamP2mpLspPingCtlGrpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.7 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamP2mpLspPingCtlGrpAddrType specifies the address type of tmnxOamP2mpLspPingCtlGrpAddr. | ||||
| CtmnxOamP2mpLspPingCtlGrpAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.8 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamP2mpLspPingCtlGrpAddr specifies the group address of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for the test. A multicast address must be specified. | ||||
| CtmnxOamP2mpLspPingCtlOptionalTLV | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamP2mpLspPingCtlOptionalTLV specifies which optional
Type/Length/Value (TLV) structure to include in the MPLS echo request
launched for the specified test.
'vpnRecursiveFec(2)' specifies the proprietary inclusion of an RFC
6512 'VPN-Recursive FEC Element'.
'vpnRecursiveFec(2)' is required to successfully ping a P2MP leaf with
the following characteristics:
1. The path between the P2MP root and the targeted leaf is a Virtual
Private Network (VPN), e.g. an SROS Virtual Private Routed Network
(VPRN) service. And ..
2. The VPN has an RFC 4364 'Option B' boundary between two Border
Gateway Protocol (BGP) Autonomous Systems. And ..
3. The leaf resides on an SROS node (with support for this object) on
the far side of the boundary (with respect to the root).
A leaf residing on a non-SROS node may not respond (or may respond
with an error) when 'vpnRecursiveFec(2)' is specified.
'none(1)' specifies the inclusion of none of the optional TLVs
described above.
| ||||
| CtmnxOamP2mpLspPingCtlRootAddrTyp | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.10 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamP2mpLspPingCtlRootAddrTyp specifies the address type of tmnxOamP2mpLspPingCtlRootAddr. | ||||
| CtmnxOamP2mpLspPingCtlRootAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.11 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamP2mpLspPingCtlRootAddr specifies the address to copy into the test packet's 'P2MP Policy MPLS Candidate Path sub-TLV' Root Address field. | ||||
| CtmnxOamP2mpLspPingCtlTreeId | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.12 | Unsigned32 (0 | 8193..16286) | RW | |
column · Unsigned32 (0 | 8193..16286) · read-write · current The value of tmnxOamP2mpLspPingCtlTreeId specifies the number to copy into the test packet's 'P2MP Policy MPLS Candidate Path sub-TLV' Tree-ID field. | ||||
| CtmnxOamP2mpLspPingCtlTreeInstId | 1.3.6.1.4.1.6527.3.1.2.11.1.21.1.13 | Unsigned32 (0 | 1..4294967295) | RW | |
column · Unsigned32 (0 | 1..4294967295) · read-write · current The value of tmnxOamP2mpLspPingCtlTreeInstId specifies the number to copy into the test packet's 'P2MP Policy MPLS Candidate Path sub-TLV' Instance-ID field. | ||||
| TtmnxOamP2mpLspPingIPAddressTable | 1.3.6.1.4.1.6527.3.1.2.11.1.22 | NA | ||
table · not-accessible · current tmnxOamP2mpLspPingIPAddressTable contains configured destination IP addresses for 'p2mpLspPing' tests. | ||||
| RtmnxOamP2mpLspPingIPAddressEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.22.1 | NA | ||
row · not-accessible · current tmnxOamP2mpLspPingIPAddressEntry contains one configured destination IP address for one 'p2mpLspPing' test. A 'p2mpLspPing' test can have several configured destination IP addresses. Rows are created/destroyed using tmnxOamP2mpLspPingCtlIpRowStatus. | ||||
| CtmnxOamP2mpLspPingCtlIpAddrIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.22.1.1 | Unsigned32 (1..5) | NA | |
column · Unsigned32 (1..5) · not-accessible · current The value of tmnxOamP2mpLspPingCtlIpAddrIndex specifies the index of the IP address within the specified test. | ||||
| CtmnxOamP2mpLspPingCtlIpRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.1.22.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamP2mpLspPingCtlIpRowStatus specifies the status of the row for the specified IP address. | ||||
| CtmnxOamP2mpLspPingCtlIpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.22.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxOamP2mpLspPingCtlIpAddrType specifies the address type of tmnxOamP2mpLspPingCtlIpAddr. | ||||
| CtmnxOamP2mpLspPingCtlIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.22.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RC | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-create · current The value of tmnxOamP2mpLspPingCtlIpAddr specifies a remote Internet address to send P2MP LSP Ping packets for a particular test. | ||||
| TtmnxOamEthCfmPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.23 | NA | ||
table · not-accessible · current tmnxOamEthCfmPingCtlTable contains Ethernet CFM-specific configuration information for 'ethCfmLoopback', 'ethCfmTwoWayDelay', and 'ethCfmTwoWaySlm' tests. This table extends the tmnxOamPingCtlTable. A row is automatically created in this table when tmnxOamPingCtlTestMode is set to 'ethCfmLoopback', 'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm'. Deleting a row in tmnxOamPingCtlTable automatically deletes the row (if any) with the same index values in tmnxOamEthCfmPingCtlTable. | ||||
| RtmnxOamEthCfmPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1 | NA | ||
row · not-accessible · current tmnxOamEthCfmPingCtlEntry defines an entry in the tmnxOamEthCfmPingCtlTable. Each index is an object in tmnxOamPingCtlTable. | ||||
| CtmnxOamEthCfmPingCtlTgtMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1.1 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamEthCfmPingCtlTgtMacAddr specifies the destination MAC address for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using this object) or indirectly (see the DESCRIPTION of tmnxOamEthCfmPingCtlRemoteMepId). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. | ||||
| CtmnxOamEthCfmPingCtlSrcMdIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamEthCfmPingCtlSrcMdIndex specifies the source CFM Maintenance Domain (MD) index for the test. The source domain can be specified using tmnxOamEthCfmPingCtlSrcMdName or tmnxOamEthCfmPingCtlSrcMdIndex (not both). tmnxOamEthCfmPingCtlSrcMdName is the preferred object for specifying the source domain. One of tmnxOamEthCfmPingCtlSrcMdName and tmnxOamEthCfmPingCtlSrcMdIndex should be assigned a non-default value. Otherwise, an attempt to start the test will fail. If specified, tmnxOamEthCfmPingCtlSrcMdIndex should match a domain created using TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMdMgmtRowStatus. Otherwise, the test will fail. An attempt to change TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 away from 'classic(1)' is blocked if any tmnxOamEthCfmPingCtlSrcMdIndex has a non-default value. Zero indicates a value has not been configured. | ||||
| CtmnxOamEthCfmPingCtlSrcMaIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamEthCfmPingCtlSrcMaIndex specifies the source CFM Maintenance Association (MA) index for the test. The source association can be specified using tmnxOamEthCfmPingCtlSrcMaName or tmnxOamEthCfmPingCtlSrcMaIndex (not both). tmnxOamEthCfmPingCtlSrcMaName is the preferred object for specifying the source association. One of tmnxOamEthCfmPingCtlSrcMaName and tmnxOamEthCfmPingCtlSrcMaIndex should be assigned a non-default value. Otherwise, the test will fail. If specified, tmnxOamEthCfmPingCtlSrcMaIndex should match an association created using TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMaMgmtRowStatus. Otherwise, the test will fail. An attempt to change TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 away from 'classic(1)' is blocked if any tmnxOamEthCfmPingCtlSrcMaIndex has a non-default value. Zero indicates a value has not been configured. | ||||
| CtmnxOamEthCfmPingCtlSrcMepId | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1.4 | Dot1agCfmMepIdOrZero | RW | |
column · Dot1agCfmMepIdOrZero · read-write · current The value of tmnxOamEthCfmPingCtlSrcMepId specifies the source Maintenance association End Point Identifier (MEP ID) for the test. Zero is the null MEP ID. | ||||
| CtmnxOamEthCfmPingCtlRemoteMepId | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1.5 | Dot1agCfmMepIdOrZero | RW | |
column · Dot1agCfmMepIdOrZero · read-write · current The value of tmnxOamEthCfmPingCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmPingCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmPingCtlTgtMacAddr and tmnxOamEthCfmPingCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmPingCtlSrcMdIndex, tmnxOamEthCfmPingCtlSrcMaIndex, tmnxOamEthCfmPingCtlSrcMdName, tmnxOamEthCfmPingCtlSrcMaName, tmnxOamEthCfmPingCtlSrcMepId, tmnxOamEthCfmPingCtlRemoteMepId. If a destination MAC address is not found, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamPingCtlProbeCount. Configuring tmnxOamEthCfmPingCtlRemoteMepId (instead of tmnxOamEthCfmPingCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured. | ||||
| CtmnxOamEthCfmPingCtlSrcMdName | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1.6 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current The value of tmnxOamEthCfmPingCtlSrcMdName specifies the name of the Maintenance Domain (MD) to be used by the test. The source domain can be specified using tmnxOamEthCfmPingCtlSrcMdName or tmnxOamEthCfmPingCtlSrcMdIndex (not both). tmnxOamEthCfmPingCtlSrcMdName is the preferred object for specifying the source domain. One of tmnxOamEthCfmPingCtlSrcMdName and tmnxOamEthCfmPingCtlSrcMdIndex should be assigned a non-default value. Otherwise, an attempt to start the test will fail. If specified, tmnxOamEthCfmPingCtlSrcMdName should match a name configured using TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMdMgmtAdminName. Otherwise, the test will fail. An empty string indicates a name has not been configured. | ||||
| CtmnxOamEthCfmPingCtlSrcMaName | 1.3.6.1.4.1.6527.3.1.2.11.1.23.1.7 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current The value of tmnxOamEthCfmPingCtlSrcMaName specifies the name of the Maintenance Association (MA) to be used by the test. The source association can be specified using tmnxOamEthCfmPingCtlSrcMaName or tmnxOamEthCfmPingCtlSrcMaIndex (not both). tmnxOamEthCfmPingCtlSrcMaName is the preferred object for specifying the source association. One of tmnxOamEthCfmPingCtlSrcMaName and tmnxOamEthCfmPingCtlSrcMaIndex should be assigned a non-default value. Otherwise, an attempt to start the test will fail. If specified, tmnxOamEthCfmPingCtlSrcMaName should match a name configured using TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMaMgmtAdminName. Otherwise, the test will fail. An empty string indicates a name has not been configured. | ||||
| TtmnxOamVccvPgTgFec128CtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.24 | NA | ||
table · not-accessible · current tmnxOamVccvPgTgFec128CtlTable contains the target information for VCCV (Virtual Circuit Connectivity Verification) ping tests which switch to downstream FEC (Forward Equivalence Class) 128 segments. | ||||
| RtmnxOamVccvPgTgFec128CtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.24.1 | NA | ||
row · not-accessible · current tmnxOamVccvPgTgFec128CtlEntry contains the target information for a VCCV ping test which switches to a downstream FEC 128 segment. The values in a row are used to fill a 'FEC 128 Pseudowire' sub-TLV (Type, Length, Value) within the 'Target FEC Stack' TLV within the launched VCCV ping request. A row is created when the test's tmnxOamVccvPingCtlSwitTgtFecType is set to 'fec128(2)'. A row is destroyed when the tmnxOamVccvPingCtlTable row is destroyed. All the objects in a row must be set in one SNMP Set PDU. Otherwise, the SNMP Set PDU will be rejected. | ||||
| CtmnxOamVccvPgTgFec128CtlSrcAddrT | 1.3.6.1.4.1.6527.3.1.2.11.1.24.1.1 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVccvPgTgFec128CtlSrcAddrT specifies the address type of tmnxOamVccvPgTgFec128CtlSrcAddr. | ||||
| CtmnxOamVccvPgTgFec128CtlSrcAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.24.1.2 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVccvPgTgFec128CtlSrcAddr specifies the value to be copied into the Sender's PE Address (Sender's Provider Edge Address) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. | ||||
| CtmnxOamVccvPgTgFec128CtlDstAddrT | 1.3.6.1.4.1.6527.3.1.2.11.1.24.1.3 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVccvPgTgFec128CtlDstAddrT specifies the address type of tmnxOamVccvPgTgFec128CtlDstAddr. | ||||
| CtmnxOamVccvPgTgFec128CtlDstAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.24.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVccvPgTgFec128CtlDstAddr specifies the value to be copied into the 'Remote PE Address' (Remote Provider Edge Address) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. | ||||
| CtmnxOamVccvPgTgFec128CtlPwId | 1.3.6.1.4.1.6527.3.1.2.11.1.24.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvPgTgFec128CtlPwId specifies the value to be copied into the 'PW ID' (Pseudowire Identifier) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. Zero indicates no Pseudowire Identifier has been configured. | ||||
| CtmnxOamVccvPgTgFec128CtlPwType | 1.3.6.1.4.1.6527.3.1.2.11.1.24.1.6 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The value of tmnxOamVccvPgTgFec128CtlPwType specifies the value to be copied into the 'PW Type' (Pseudowire Type) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. The code points are defined in RFC 4446. SROS supports services corresponding to the following RFC 4446 PW Type code points. PW Type Description ------- --------------------------------------- 2 ATM AAL5 SDU VCC transport 3 ATM transparent cell transport 5 Ethernet 9 ATM n-to-one VCC cell transport 10 ATM n-to-one VPC cell transport 17 Structure-agnostic E1 over packet 18 Structure-agnostic T1 (DS1) over packet 21 CES over PSN basic mode 23 CES over PSN TDM with CAS Zero indicates no Pseudowire Type has been configured. | ||||
| TtmnxOamVccvPgTgStaticCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.25 | NA | ||
table · not-accessible · current tmnxOamVccvPgTgStaticCtlTable contains the target information for VCCV (Virtual Circuit Connectivity Verification) ping tests which switch to downstream static (i.e. MPLS-TP) segments. | ||||
| RtmnxOamVccvPgTgStaticCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1 | NA | ||
row · not-accessible · current tmnxOamVccvPgTgStaticCtlEntry contains the target information for a VCCV ping test which switches to a downstream static (i.e. MPLS-TP) segment. The values in a row are used to fill a 'Static Pseudowire' sub-TLV (Type, Length, Value) within the 'Target FEC Stack' TLV within the launched VCCV ping request. A row is created when the test's tmnxOamVccvPingCtlSwitTgtFecType is set to 'static(3)'. A row is destroyed when the tmnxOamVccvPingCtlTable row is destroyed. All the objects in a row must be set in one SNMP Set PDU. Otherwise, the SNMP Set PDU will be rejected. | ||||
| CtmnxOamVccvPgTgStaticCtlAgi | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1.1 | TmnxVPNRouteDistinguisher | RW | |
column · TmnxVPNRouteDistinguisher · read-write · current The value of tmnxOamVccvPgTgStaticCtlAgi specifies the value to be copied into the 'Service Identifier' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. As specified in RFC 6426, the 'Service Identifier' field may be filled with an AGI (Attachment Group Identifier). The all-zeroes value indicates no Service Identifier has been configured. | ||||
| CtmnxOamVccvPgTgStaticCtlSaiiGlbl | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1.2 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvPgTgStaticCtlSaiiGlbl specifies the value to be copied into the 'Source Global ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. Zero indicates no Source Global ID has been configured. | ||||
| CtmnxOamVccvPgTgStaticCtlSaiiNode | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1.3 | TmnxMplsTpNodeID | RW | |
column · TmnxMplsTpNodeID · read-write · current The value of tmnxOamVccvPgTgStaticCtlSaiiNode specifies the value to be copied into the 'Source Node ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. Zero indicates no Source Node ID has been configured. | ||||
| CtmnxOamVccvPgTgStaticCtlSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvPgTgStaticCtlSaiiAcId specifies the value to be copied into the 'Source AC-ID' (Source Attachment Circuit Identifier) field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. Zero indicates no Source AC-ID has been configured. | ||||
| CtmnxOamVccvPgTgStaticCtlTaiiGlbl | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1.5 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvPgTgStaticCtlTaiiGlbl specifies the value to be copied into the 'Destination Global ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. Zero indicates no Destination Global ID has been configured. | ||||
| CtmnxOamVccvPgTgStaticCtlTaiiNode | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1.6 | TmnxMplsTpNodeID | RW | |
column · TmnxMplsTpNodeID · read-write · current The value of tmnxOamVccvPgTgStaticCtlTaiiNode specifies the value to be copied into the 'Destination Node ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. Zero indicates no Destination Node ID has been configured. | ||||
| CtmnxOamVccvPgTgStaticCtlTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.1.25.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvPgTgStaticCtlTaiiAcId specifies the value to be copied into the 'Destination AC-ID' (Destination Attachment Circuit Identifier) field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV ping request. Zero indicates no Destination AC-ID has been configured. | ||||
| TtmnxOamVxlanPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.26 | NA | ||
table · not-accessible · current tmnxOamVxlanPingCtlTable (along with tmnxOamPingCtlTable) contains the configuration information for VXLAN (Virtual Extensible Local Area Network) ping tests. | ||||
| RtmnxOamVxlanPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1 | NA | ||
row · not-accessible · current tmnxOamVxlanPingCtlEntry (along with tmnxOamPingCtlEntry) contains the configuration information for a VXLAN ping test. A row is created when the corresponding tmnxOamPingCtlTestMode is set to 'vxlanPing'. A row is destroyed when the corresponding tmnxOamPingCtlTable row is destroyed (using tmnxOamPingCtlRowStatus). The values in a particular row in this table cannot be changed when the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'. | ||||
| CtmnxOamVxlanPingCtlNetworkId | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.1 | Unsigned32 (0 | 1..16777215) | RW | |
column · Unsigned32 (0 | 1..16777215) · read-write · current The value of tmnxOamVxlanPingCtlNetworkId specifies the VXLAN Network Identifier (VNI) of the VXLAN network to be tested. The value is copied into the VXLAN Network Identifier field of the VXLAN Header of the launched OAM echo request. Zero indicates no VXLAN Network Identifier has been configured. The test will fail if tmnxOamVxlanPingCtlNetworkId is zero. | ||||
| CtmnxOamVxlanPingCtlReplyMode | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamVxlanPingCtlReplyMode specifies the encapsulation
to be used in the OAM echo reply. The value is copied into the Reply
Mode field of the Generic Overlay OAM structure of the launched OAM
echo request. The replying node uses the value to choose the
encapsulation of the OAM echo reply.
Code points:
udp(2) - reply using an IPv4 UDP packet
overlay(3) - reply via the overlay segment.
The Jain draft's 'Do Not Reply' option (i.e. the Reply Mode with code
point 1) is not supported.
| ||||
| CtmnxOamVxlanPingCtlIFlag | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.3 | Unsigned32 (0 | 1) | RW | |
column · Unsigned32 (0 | 1) · read-write · current The value of tmnxOamVxlanPingCtlIFlag specifies the I flag value to be used for the test. The value is copied into the I flag field of the VXLAN Header of the launched OAM echo request. | ||||
| CtmnxOamVxlanPingCtlTestId | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.4 | Unsigned32 (0..2147483647) | RW | |
column · Unsigned32 (0..2147483647) · read-write · current The value of tmnxOamVxlanPingCtlTestId specifies a unique identifier for the test. The value is copied into the Originator Handle field of the Generic Overlay OAM structure of the launched OAM echo request. Zero indicates no VXLAN Test Identifier has been configured. The test will fail if tmnxOamVxlanPingCtlTestId is zero. | ||||
| CtmnxOamVxlanPingCtlOutSrcUdpPt | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.5 | Unsigned32 (0 | 1..65535) | RW | |
column · Unsigned32 (0 | 1..65535) · read-write · current The value of tmnxOamVxlanPingCtlOutSrcUdpPt specifies the outer source UDP port to be used for the test. If tmnxOamVxlanPingCtlOutSrcUdpPt is zero, an SROS-computed UDP port number is copied into the Source Port field of the Outer UDP Header of the launched OAM echo request. If tmnxOamVxlanPingCtlOutSrcUdpPt is non-zero, the given value is copied into the Source Port field of the Outer UDP Header of the launched OAM echo request. | ||||
| CtmnxOamVxlanPingCtlOutIpTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.6 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current The value of tmnxOamVxlanPingCtlOutIpTtl specifies the outer IP Time To Live value to be used for the test. The value is copied into the Time To Live field of the Outer IPv4 Header of the launched OAM echo request. | ||||
| CtmnxOamVxlanPingCtlInL2DestMac | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.7 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamVxlanPingCtlInL2DestMac specifies the inner Destination MAC address to be used for the test. The value is copied into the Inner Destination MAC Address field of the Inner Ethernet Header of the launched OAM echo request. | ||||
| CtmnxOamVxlanPingCtlInIpSrcAddrT | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.8 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVxlanPingCtlInIpSrcAddrT specifies the type of address in tmnxOamVxlanPingCtlInIpSrcAddr. | ||||
| CtmnxOamVxlanPingCtlInIpSrcAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.9 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVxlanPingCtlInIpSrcAddr specifies the inner source IP address to be used for the test. The value is copied into the Source IP Address field of the Inner IP Header of the launched OAM Echo request. For snmpset, only IPv4 addresses are supported. If this object has its default value when tmnxOamPingCtlServiceId is configured for the test, SROS copies the service's source VXLAN Tunnel Endpoint (VTEP) into tmnxOamVxlanPingCtlInIpSrcAddrT and tmnxOamVxlanPingCtlInIpSrcAddr. The copied VTEP can be IPv4 or IPv6. The test fails to start when tmnxOamVxlanPingCtlInIpSrcAddrT is 'ipv6(2)'. | ||||
| CtmnxOamVxlanPingCtlInIpDstAddrT | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.10 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVxlanPingCtlInIpDstAddrT specifies the type of address in tmnxOamVxlanPingCtlInIpDstAddr. | ||||
| CtmnxOamVxlanPingCtlInIpDstAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.11 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVxlanPingCtlInIpDstAddr specifies the inner destination IP address to be used for the test. The value is copied into the Destination IP Address field of the Inner IP Header of the launched OAM Echo request. Addresses in the address block 127.0.0.0/8 are accepted. The default address is 127.0.0.1. | ||||
| CtmnxOamVxlanPingCtlEndSysMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.12 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamVxlanPingCtlEndSysMacAddr specifies the end system MAC address to be verified by the test. The value is copied into the MAC Address #1 field of the End-System MAC Sub-TLV of the launched OAM Echo request. | ||||
| CtmnxOamVxlanPingCtlReflectPad | 1.3.6.1.4.1.6527.3.1.2.11.1.26.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamVxlanPingCtlReflectPad specifies whether or not to copy the pad TLV from the OAM echo request to the OAM echo response. The combination of tmnxOamVxlanPingCtlReflectPad='true(1)' and tmnxOamPingCtlSize=0 is rejected, because tmnxOamPingCtlSize=0 indicates there is no pad TLV to be copied. The combination of tmnxOamVxlanPingCtlReflectPad='true(1)' and tmnxOamVxlanPingCtlReplyMode='udp(2)' is rejected. | ||||
| TtmnxOamVxlanPingHistoryTable | 1.3.6.1.4.1.6527.3.1.2.11.1.27 | NA | ||
table · not-accessible · current tmnxOamVxlanPingHistoryTable (along with tmnxOamPingHistoryTable) contains the information obtained from Virtual Extensible Local Area Network (VXLAN) Echo Reply PDUs. | ||||
| RtmnxOamVxlanPingHistoryEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.27.1 | NA | ||
row · not-accessible · current tmnxOamVxlanPingHistoryEntry (along with tmnxOamPingHistoryEntry) contains the information obtained from one VXLAN Echo Reply PDU. A row is created when a VXLAN Echo Reply PDU (associated with a managed 'vxlanPing' test) arrives. A row is destroyed when the corresponding tmnxOamPingHistoryEntry is destroyed. The first two indices specify a 'vxlanPing' test. The third index specifies a test run (started using tmnxOamPingCtlAdminStatus). The fourth index specifies a VXLAN Echo Reply PDU. | ||||
| CtmnxOamVxlanPingHistReturnCode | 1.3.6.1.4.1.6527.3.1.2.11.1.27.1.1 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The value of tmnxOamVxlanPingHistReturnCode indicates the value copied from the Return Code field of the Generic Overlay OAM Packet structure of the VXLAN Echo Reply PDU. Code points include (but are not restricted to) the following. Value Interpretation ----- ------------------------------- 0 no return code 1 malformed echo request received 2 overlay segment not present 3 overlay segment not operational 4 OK | ||||
| CtmnxOamVxlanPingHistRtrnSubCode | 1.3.6.1.4.1.6527.3.1.2.11.1.27.1.2 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The value of tmnxOamVxlanPingHistRtrnSubCode indicates the value copied from the Return Subcode field of the Generic Overlay OAM Packet structure of the VXLAN Echo Reply PDU. | ||||
| CtmnxOamVxlanPingHistValidationRC | 1.3.6.1.4.1.6527.3.1.2.11.1.27.1.3 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The value of tmnxOamVxlanPingHistValidationRC indicates the value copied from the 'Return Code #1' field of the 'Sub-TLV for Validating End-System MAC Address' of the VXLAN Echo Reply PDU. | ||||
| CtmnxOamVxlanPingHistNetworkId | 1.3.6.1.4.1.6527.3.1.2.11.1.27.1.4 | Unsigned32 (0..16777215) | RO | |
column · Unsigned32 (0..16777215) · read-only · current The value of tmnxOamVxlanPingHistNetworkId indicates the value of the VXLAN Network Identifier (VNI) field of the VXLAN Header of the VXLAN Echo Reply PDU. | ||||
| CtmnxOamVxlanPingHistOutIpTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.27.1.5 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The value of tmnxOamVxlanPingHistOutIpTtl indicates the value of the Time To Live field of the Outer IPv4 Header of the VXLAN Echo Reply PDU. | ||||
| TtmnxOamBfdOnLspPingResultsTable | 1.3.6.1.4.1.6527.3.1.2.11.1.28 | NA | ||
table · not-accessible · current tmnxOamBfdOnLspPingResultsTable contains the information obtained during the RFC 5884 procedures used to bootstrap and periodically verify Bidirectional Forwarding Detection (BFD) sessions on Label Switched Paths (LSPs). The bootstrap and verification procedures use LSP ping echo request and reply packets. | ||||
| RtmnxOamBfdOnLspPingResultsEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1 | NA | ||
row · not-accessible · current tmnxOamBfdOnLspPingResultsEntry contains the information obtained during the RFC 5884 procedures used to bootstrap and periodically verify a BFD session on an LSP. A row is created when an RFC 5884 BFD-on-LSP session starts its bootstrap procedure. A row is destroyed when the BFD-on-LSP session disconnects. | ||||
| CtmnxOamBfdOnLspLocalBfdDiscrim | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamBfdOnLspLocalBfdDiscrim specifies the local BFD discriminator for a BFD-on-LSP session. The local discriminator is this system's identifier of the BFD session. | ||||
| CtmnxOamBfdOnLspRemoteBfdDiscrim | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBfdOnLspRemoteBfdDiscrim indicates the remote BFD discriminator for the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. The remote discriminator is the far end system's identifier of the BFD session. Zero is returned if the bootstrap has not completed successfully. | ||||
| CtmnxOamBfdOnLspRemoteAddressType | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamBfdOnLspRemoteAddressType indicates the type of address stored in tmnxOamBfdOnLspRemoteAddress. | ||||
| CtmnxOamBfdOnLspRemoteAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamBfdOnLspRemoteAddress (in conjunction with tmnxOamBfdOnLspRemoteAddressType) indicates the IP address of the node which sent the most recent LSP ping echo reply for the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. If the LSP is operating correctly, the reply is sent by the far end of the BFD-on-LSP session. | ||||
| CtmnxOamBfdOnLspLspName | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.5 | TLNamedItemOrEmpty | RO | |
column · TLNamedItemOrEmpty · read-only · current The value of tmnxOamBfdOnLspLspName indicates the LSP name associated with the Resource Reservation Protocol (RSVP) BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. LSP names are configured using TIMETRA-MPLS-MIB::vRtrMplsLspName. When the value of tmnxOamBfdOnLspFecType is not 'rsvp(1)', the value of this object is the empty string. | ||||
| CtmnxOamBfdOnLspPingReturnCode | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.6 | TmnxOamPingRtnCode | RO | |
column · TmnxOamPingRtnCode · read-only · current The value of tmnxOamBfdOnLspPingReturnCode indicates the status of the most recent LSP ping echo reply received for the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. | ||||
| CtmnxOamBfdOnLspPingReturnSubcode | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBfdOnLspPingReturnSubcode indicates the value present in the RFC 4379 Return Subcode (RSC) field of the most recent LSP ping echo reply for the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. | ||||
| CtmnxOamBfdOnLspPingTxCount | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBfdOnLspPingTxCount indicates the number of LSP ping echo request packets sent for the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. | ||||
| CtmnxOamBfdOnLspPingRxCount | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBfdOnLspPingRxCount indicates the number of LSP ping echo reply packets received for the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. | ||||
| CtmnxOamBfdOnLspPathState | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamBfdOnLspPathState indicates the state of the path
hosting the RSVP BFD-on-LSP session identified by
tmnxOamBfdOnLspLocalBfdDiscrim.
Code points:
unknown (1) - the state of the path hosting the BFD-on-LSP session is
unknown
active (2) - the BFD-on-LSP session is running on the active path
inactive (3) - the BFD-on-LSP session is running on the inactive path
When the value of tmnxOamBfdOnLspFecType is not 'rsvp(1)', the value
of this object is 'unknown(1)'.
| ||||
| CtmnxOamBfdOnLspPingTxInterval | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBfdOnLspPingTxInterval indicates the transmission interval for LSP ping request PDUs sent during periodic verification of the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. This value is configured using TIMETRA-MPLS-MIB::vRtrMplsLspBfdPingIntvl. A read-only copy of the value is available here for the convenience of a manager wishing to read the value using a local BFD discriminator as the index.
| ||||
| CtmnxOamBfdOnLspBootStrRetryCount | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBfdOnLspBootStrRetryCount indicates the current number of retries started while attempting to bootstrap the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. If the bootstrap completed successfully on the first attempt, zero is returned. | ||||
| CtmnxOamBfdOnLspFecType | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.13 | TmnxBfdOnLspSessFecType | RO | |
column · TmnxBfdOnLspSessFecType · read-only · current The value of tmnxOamBfdOnLspFecType indicates the Forwarding Equivalence Class (FEC) type of the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. This release supports code points 'rsvp(1)' and 'ldp(2)'. | ||||
| CtmnxOamBfdOnLspPrefixType | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.14 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamBfdOnLspPrefixType indicates the type of address stored in tmnxOamBfdOnLspPrefix. | ||||
| CtmnxOamBfdOnLspPrefix | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.15 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamBfdOnLspPrefix indicates (in conjunction with tmnxOamBfdOnLspPrefixType and tmnxOamBfdOnLspPrefixLen) the prefix which identifies the Label Distribution Protocol (LDP) LSP which hosts the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. When tmnxOamBfdOnLspFecType is 'rsvp(1)', the three prefix objects have the following values. tmnxOamBfdOnLspPrefixType : 'unknown(0)' tmnxOamBfdOnLspPrefix : empty tmnxOamBfdOnLspPrefixLen : 0. | ||||
| CtmnxOamBfdOnLspPrefixLen | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.16 | InetAddressPrefixLength (0..128) | RO | |
column · InetAddressPrefixLength (0..128) · read-only · current The value of tmnxOamBfdOnLspPrefixLen indicates the number of significant bits in the prefix defined by tmnxOamBfdOnLspPrefixType, tmnxOamBfdOnLspPrefix, and tmnxOamBfdOnLspPrefixLen.
| ||||
| CtmnxOamBfdOnLspSourceAddressType | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.17 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamBfdOnLspSourceAddressType indicates the type of address stored in tmnxOamBfdOnLspSourceAddress. | ||||
| CtmnxOamBfdOnLspSourceAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.18 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamBfdOnLspSourceAddress (in conjunction with tmnxOamBfdOnLspSourceAddressType) indicates the source IP address of the BFD-on-LSP session identified by tmnxOamBfdOnLspLocalBfdDiscrim. | ||||
| CtmnxOamBfdOnLspOperState | 1.3.6.1.4.1.6527.3.1.2.11.1.28.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamBfdOnLspOperState indicates the operational state
(with respect to the RFC 5884 LSP Ping procedures) of the BFD-on-LSP
session identified by tmnxOamBfdOnLspLocalBfdDiscrim.
Code Points
'bootstrapInProg(1)' - the session is being bootstrapped using LSP
ping, as described in RFC 5884 Section 6.
'bootstrappedNoPeriodicVerif(2)' - the bootstrap completed
successfully. This is the success state for a session which has
periodic verification of the LSP (using LSP ping) disabled.
Periodic verification is disabled by setting the session's LSP ping
interval (e.g.
TIMETRA-LDP-NG-MIB::vRtrLdpNgBfdOnLspPfxListPingIntv) to zero.
'bootstrappedSendingPeriodicVerif(3)' - the bootstrap completed
successfully, and the session is sending LSP pings to periodically
verify the LSP (as described in RFC 5884 Section 3.2). This is the
success state for a session which has periodic verification of the
session enabled.
The BFD-level operational state of a BFD-on-LSP session is given by
TIMETRA-BFD-MIB::tmnxBfdOnLspSessOperState.
| ||||
| TtmnxOamVxlanPingResultsTable | 1.3.6.1.4.1.6527.3.1.2.11.1.29 | NA | ||
table · not-accessible · current tmnxOamVxlanPingResultsTable contains results of VXLAN (Virtual Extensible Local Area Network) ping tests. | ||||
| RtmnxOamVxlanPingResultsEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.29.1 | NA | ||
row · not-accessible · current tmnxOamVxlanPingResultsEntry contains results of one 'vxlanPing' test run. tmnxOamPingResultsEntry contains additional results for the test run. A tmnxOamVxlanPingResultsEntry is created/destroyed when a tmnxOamPingResultsEntry is created/destroyed for a 'vxlanPing' test. tmnxOamPingCtlEntry and tmnxOamVxlanPingCtlEntry are used to configure and start a 'vxlanPing' test. tmnxOamVxlanPingHistoryEntry contains per-probe results for a 'vxlanPing' test run. | ||||
| CtmnxOamVxlanPingResOutSrcAddrTyp | 1.3.6.1.4.1.6527.3.1.2.11.1.29.1.1 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamVxlanPingResOutSrcAddrTyp indicates the address type of tmnxOamVxlanPingResOutSrcAddress. | ||||
| CtmnxOamVxlanPingResOutSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.29.1.2 | InetAddress (SIZE (4 | 16)) | RO | |
column · InetAddress (SIZE (4 | 16)) · read-only · current The value of tmnxOamVxlanPingResOutSrcAddress indicates the outer source IP address (as selected by SROS) used for the specified 'vxlanPing' test run. The value was copied into the Outer Source IPv4 Address field of the VXLAN Header of each OAM echo request launched for the specified test run. IPv6 may be supported in a future release. | ||||
| NtmnxOamPingReadOnlyScalars | 1.3.6.1.4.1.6527.3.1.2.11.1.30 | |||
| StmnxOamBfdOnLspSessBootstrInProg | 1.3.6.1.4.1.6527.3.1.2.11.1.30.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamBfdOnLspSessBootstrInProg indicates the current number of BFD-on-LSP sessions with OAM operational state (i.e. tmnxOamBfdOnLspOperState) 'bootstrapInProg(1)'.
| ||||
| StmnxOamBfdOnLspSessBootstrNoPV | 1.3.6.1.4.1.6527.3.1.2.11.1.30.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamBfdOnLspSessBootstrNoPV indicates the current number of BFD-on-LSP sessions with OAM operational state (i.e. tmnxOamBfdOnLspOperState) 'bootstrappedNoPeriodicVerif(2)'.
| ||||
| StmnxOamBfdOnLspSessBootstrSendPV | 1.3.6.1.4.1.6527.3.1.2.11.1.30.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamBfdOnLspSessBootstrSendPV indicates the current number of BFD-on-LSP sessions with OAM operational state (i.e. tmnxOamBfdOnLspOperState) 'bootstrappedSendingPeriodicVerif(3)'.
| ||||
| TtmnxOamBierPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.31 | NA | ||
table · not-accessible · current tmnxOamBierPingCtlTable (along with tmnxOamPingCtlTable) contains the configuration information for BIER (Bit Index Explicit Replication) ping tests. | ||||
| RtmnxOamBierPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.31.1 | NA | ||
row · not-accessible · current tmnxOamBierPingCtlEntry (along with tmnxOamPingCtlEntry) contains the configuration information for a BIER ping test. A row is created when the corresponding tmnxOamPingCtlTestMode is set to 'bierPing'. A row is destroyed when the corresponding tmnxOamPingCtlTable row is destroyed (using tmnxOamPingCtlRowStatus). The values in a particular row in this table cannot be changed when the corresponding tmnxOamPingCtlAdminStatus is 'enabled(1)'. | ||||
| CtmnxOamBierPingCtlSubDomain | 1.3.6.1.4.1.6527.3.1.2.11.1.31.1.1 | Unsigned32 (0..255) | RW | |
column · Unsigned32 (0..255) · read-write · current The value of tmnxOamBierPingCtlSubDomain specifies the BIER sub-domain to be tested. Zero indicates the default sub-domain. | ||||
| CtmnxOamBierPingCtlBfrId | 1.3.6.1.4.1.6527.3.1.2.11.1.31.1.2 | Unsigned32 (0..4096) | RW | |
column · Unsigned32 (0..4096) · read-write · current The value of tmnxOamBierPingCtlBfrId specifies the identifier of the Bit-Forwarding Router (BFR) to be pinged. The BFR-ID must be a member of the tested sub-domain (as configured using tmnxOamBierPingCtlSubDomain). Otherwise, the test will fail. Zero indicates no BFR-ID has been configured. There are three methods to configure the destination(s) to be pinged: 1. tmnxOamBierPingCtlBfrId. 2. tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd. 3. tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress. Exactly one of the methods must be used. Otherwise, the test will fail. | ||||
| CtmnxOamBierPingCtlBfrIdStart | 1.3.6.1.4.1.6527.3.1.2.11.1.31.1.3 | Unsigned32 (0..4096) | RW | |
column · Unsigned32 (0..4096) · read-write · current The value of tmnxOamBierPingCtlBfrIdStart specifies the start of a
contiguous range of Bit-Forwarding Router (BFR) identifiers to be
pinged. tmnxOamBierPingCtlBfrIdEnd specifies the end of the range.
Each BFR-ID in the range must be a member of the tested sub-domain
(as configured using tmnxOamBierPingCtlSubDomain). Otherwise, the
test will fail.
Zero indicates no start for the BFR-ID range has been configured.
The following objects must be set together in one SNMP Set PDU:
tmnxOamBierPingCtlBfrIdStart,
tmnxOamBierPingCtlBfrIdEnd.
There are three methods to configure the destination(s) to be pinged:
1. tmnxOamBierPingCtlBfrId.
2. tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd.
3. tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress.
Exactly one of the methods must be used. Otherwise, the test will
fail. | ||||
| CtmnxOamBierPingCtlBfrIdEnd | 1.3.6.1.4.1.6527.3.1.2.11.1.31.1.4 | Unsigned32 (0..4096) | RW | |
column · Unsigned32 (0..4096) · read-write · current The value of tmnxOamBierPingCtlBfrIdEnd specifies the end of a
contiguous range of Bit-Forwarding Router (BFR) identifiers to be
pinged. tmnxOamBierPingCtlBfrIdStart specifies the start of the range.
Each BFR-ID in the range must be a member of the tested sub-domain
(as configured using tmnxOamBierPingCtlSubDomain). Otherwise, the
test will fail.
Zero indicates no end for the BFR-ID range has been configured.
The following objects must be set together in one SNMP Set PDU:
tmnxOamBierPingCtlBfrIdStart,
tmnxOamBierPingCtlBfrIdEnd.
There are three methods to configure the destination(s) to be pinged:
1. tmnxOamBierPingCtlBfrId.
2. tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd.
3. tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress.
Exactly one of the methods must be used. Otherwise, the test will
fail. | ||||
| CtmnxOamBierPingCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.1.31.1.5 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current The value of tmnxOamBierPingCtlTtl specifies the MPLS Time To Live (TTL) to be used for the test. | ||||
| TtmnxOamBierPingBfrPfxCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.1.32 | NA | ||
table · not-accessible · current tmnxOamBierPingBfrPfxCtlTable contains IP destination addresses (i.e. Bit-Forwarding Router (BFR) prefixes) for BIER ping tests. | ||||
| RtmnxOamBierPingBfrPfxCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.32.1 | NA | ||
row · not-accessible · current tmnxOamBierPingBfrPfxCtlEntry contains one BFR prefix. A BIER ping test can have several BFR prefixes. Each BFR prefix is an IP destination address for the test. A row is created/destroyed using tmnxOamBierPingBfrPfxCtlRowState. Rows in this table belonging to a particular test cannot be added, changed, or deleted when the test's tmnxOamPingCtlAdminStatus is 'enabled(1)'. | ||||
| CtmnxOamBierPingPfxIndex | 1.3.6.1.4.1.6527.3.1.2.11.1.32.1.1 | Unsigned32 (1..16) | NA | |
column · Unsigned32 (1..16) · not-accessible · current The value of tmnxOamBierPingPfxIndex specifies a BFR prefix index. The index allows one test to have several BFR prefixes. | ||||
| CtmnxOamBierPingBfrPfxCtlRowState | 1.3.6.1.4.1.6527.3.1.2.11.1.32.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamBierPingBfrPfxCtlRowState specifies the status of the row for the specified BFR prefix. | ||||
| CtmnxOamBierPingBfrPfxCtlAddrType | 1.3.6.1.4.1.6527.3.1.2.11.1.32.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxOamBierPingBfrPfxCtlAddrType specifies the address type of tmnxOamBierPingBfrPfxCtlAddress. | ||||
| CtmnxOamBierPingBfrPfxCtlAddress | 1.3.6.1.4.1.6527.3.1.2.11.1.32.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RC | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-create · current The value of tmnxOamBierPingBfrPfxCtlAddress specifies a BFR prefix used as a destination address for a BIER ping test. There are three methods to configure the destination(s) to be pinged: 1. tmnxOamBierPingCtlBfrId. 2. tmnxOamBierPingCtlBfrIdStart, tmnxOamBierPingCtlBfrIdEnd. 3. tmnxOamBierPingBfrPfxCtlAddrType, tmnxOamBierPingBfrPfxCtlAddress. Exactly one of the methods must be used. Otherwise, the test will fail. | ||||
| TtmnxOamBierPingHistoryTable | 1.3.6.1.4.1.6527.3.1.2.11.1.33 | NA | ||
table · not-accessible · current tmnxOamBierPingHistoryTable (along with tmnxOamPingHistoryTable) contains the per-probe results for Bit Index Explicit Replication (BIER) ping tests. | ||||
| RtmnxOamBierPingHistoryEntry | 1.3.6.1.4.1.6527.3.1.2.11.1.33.1 | NA | ||
row · not-accessible · current tmnxOamBierPingHistoryEntry (along with tmnxOamPingHistoryEntry) contains the results for one BIER ping probe. A row is created/destroyed when the corresponding tmnxOamPingHistoryEntry is created/destroyed. The first two indices specify a 'bierPing' test. The third index specifies a test run (started using tmnxOamPingCtlAdminStatus). The fourth index specifies a Bit-Forwarding Router (BFR) with results to report. All the indices match the corresponding tmnxOamPingHistoryEntry indices. | ||||
| CtmnxOamBierPingHistoryBfrId | 1.3.6.1.4.1.6527.3.1.2.11.1.33.1.1 | Unsigned32 (0..4096) | RO | |
column · Unsigned32 (0..4096) · read-only · current The value of tmnxOamBierPingHistoryBfrId indicates the identifier of the Bit-Forwarding Router (BFR) targeted by the launched BIER Echo Request. Zero is returned if the BFR-ID cannot be determined. | ||||
| CtmnxOamBierPingHistoryBfrPfxType | 1.3.6.1.4.1.6527.3.1.2.11.1.33.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamBierPingHistoryBfrPfxType indicates the IP address type of the address read using tmnxOamBierPingHistoryBfrPfx. | ||||
| CtmnxOamBierPingHistoryBfrPfx | 1.3.6.1.4.1.6527.3.1.2.11.1.33.1.3 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamBierPingHistoryBfrPfx indicates the IP address of the Bit-Forwarding Router (BFR) targeted by the launched BIER Echo Request. | ||||
| CtmnxOamBierPingHistoryReturnCode | 1.3.6.1.4.1.6527.3.1.2.11.1.33.1.4 | TmnxOamBierHistoryReturnCode | RO | |
column · TmnxOamBierHistoryReturnCode · read-only · current The value of tmnxOamBierPingHistoryReturnCode indicates the value copied from the Return Code field of the BIER Echo Reply PDU. Zero (i.e. 'No Return Code') is returned if a BIER Echo Reply PDU did not arrive (e.g. in the case of a timeout). | ||||
| NtmnxOamTraceRouteObjs | 1.3.6.1.4.1.6527.3.1.2.11.2 | |||
| NtmnxOamTraceRouteNotifyObjects | 1.3.6.1.4.1.6527.3.1.2.11.2.1 | |||
| StmnxOamTrMaxConcurrentRequests | 1.3.6.1.4.1.6527.3.1.2.11.2.2 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The maximum number of concurrent active trace route requests that are allowed within an agent implementation. A value of 0 for this object implies that there is no limit for the number of concurrent active requests in effect.
| ||||
| TtmnxOamTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.3 | NA | ||
table · not-accessible · current tmnxOamTrCtlTable contains configuration and status information for trace tests. | ||||
| RtmnxOamTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1 | NA | ||
row · not-accessible · current tmnxOamTrCtlEntry contains configuration and status information for one trace test. Rows are created/destroyed using tmnxOamTrCtlRowStatus. The test's test type (e.g. 'lspTraceRoute(2)') is configured using tmnxOamTrCtlTestMode. Depending on the test type, configuration specific to the test type may reside in a child table (e.g. tmnxOamLspTrCtlTable). Test results reside in the tables listed in the tmnxOamTrCtlTestMode DESCRIPTION clause. | ||||
| CtmnxOamTrCtlOwnerIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.1 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamTrCtlOwnerIndex specifies the owner name of the test. | ||||
| CtmnxOamTrCtlTestIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.2 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamTrCtlTestIndex specifies the test name of the test. The test is identified by the owner name and the test name. One owner typically owns several tests. This indexing method ensures tests created by several owners have unique indices. | ||||
| CtmnxOamTrCtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamTrCtlRowStatus specifies the status of the row for the specified trace test. Deleting a row deletes all the child rows with the same owner name and test name, including additional configuration rows (e.g. tmnxOamLspTrCtlTable), and rows containing test results (e.g. tmnxOamTrHopsTable). | ||||
| CtmnxOamTrCtlStorageType | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.4 | StorageType | RC | obsolete |
column · StorageType · read-create · obsolete This object was marked obsolete in SROS Release 14.0 R1. There is no replacement object. | ||||
| CtmnxOamTrCtlDescr | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.5 | SnmpAdminString | RC | obsolete |
column · SnmpAdminString · read-create · obsolete This object was marked obsolete in SROS Release 14.0 R1. There is no replacement object. | ||||
| CtmnxOamTrCtlTestMode | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamTrCtlTestMode specifies the type of trace route
test defined by this row.
Code points:
'bierTrace'
- Bit Index Explicit Replication (BIER) trace route test.
'ethCfmLinkTrace'
- Ethernet Connectivity Fault Management (CFM) trace route test.
'icmpTraceRoute'
- traceroute test (receives Internet Control Message Protocol
(ICMP) responses).
'ldpTreeTrace'
- Label Distribution Protocol (LDP) Tree Trace test.
'lspTraceRoute'
- Label Switched Path (LSP) trace route test.
'macTraceRoute'
- Ethernet Media Access Control (MAC) trace route test.
'mcastTraceRoute'
- mtrace test (i.e. IP multicast trace route test, using
IETF draft-ietf-idmr-traceroute-ipm (IGMP-based)).
OR
Mtrace2 test (i.e. IP multicast trace route test, using
IETF draft-ietf-mboned-mtrace-v2 (UDP-based)).
'none'
- no test type.
'p2mpLspTrace'
- Point-to-Multipoint Label Switched Path (LSP) trace route test.
'vccvTraceRoute'
- Virtual Circuit Connectivity Verification (VCCV) trace route
test.
'vprnTraceRoute'
- Virtual Private Routed Network (VPRN) trace route test.
When tmnxOamTrCtlTestMode is set, SROS may automatically create a
same-INDEX row in a table used to configure objects specific to the
test type (as shown in the following table).
tmnxOamTrCtlTestMode Auto-Gen Row for Additional Configuration
-------------------- -----------------------------------------
'bierTrace' tmnxOamBierTrCtlTable
'ethCfmLinkTrace' tmnxOamEthCfmTrCtlTable
'icmpTraceRoute' tmnxOamIcmpTrCtlTable
'ldpTreeTrace' tmnxOamLTtraceCtlTable
'lspTraceRoute' tmnxOamLspTrCtlTable
'macTraceRoute' tmnxOamMacTrCtlTable
'mcastTraceRoute' tmnxOamMcastTrCtlTable
'p2mpLspTrace' tmnxOamP2mpLspTrCtlTable
'vccvTraceRoute' tmnxOamVccvTrCtlTable
'vprnTraceRoute' tmnxOamVprnTrCtlTable
When an object other than tmnxOamTrCtlTestMode is set, SROS may
automatically create a same-INDEX row in a table used to configure
objects specific to the test sub-type (as shown in the following
table).
tmnxOamTrCtlTestMode Auto-Gen Row for Additional Configuration
-------------------- -----------------------------------------
'vccvTraceRoute' tmnxOamVccvTrTgFec128CtlTable
tmnxOamVccvTrTgStaticCtlTable
otherwise none
Baseline: test results are available in tmnxOamTrResultsTable,
tmnxOamTrHopsTable, and tmnxOamTrProbeHistoryTable.
Exceptions are noted in the following two tables.
tmnxOamTrCtlTestMode Additional Results Table(s)
-------------------- -------------------------------
'bierTrace' tmnxOamBierTrProbeHistoryTable
'ethCfmLinkTrace' tmnxOamEthCfmTrPrHistTable
'icmpTraceRoute' tmnxOamIcmpTrLabelStackTable
tmnxOamIcmpTrOrDgHdrTable
tmnxOamIcmpTrOrDgIPv6Table
tmnxOamIcmpTrOrDgSrhSgListTable
tmnxOamIcmpTrOrDgSrhTable
'ldpTreeTrace' tmnxOamLTtraceHopInfoTable
tmnxOamLTtraceResultsTable
'lspTraceRoute' tmnxOamLspTrDSLabelTable
tmnxOamLspTrFecStackTable
tmnxOamLspTrInitDSLabelTable
tmnxOamLspTrInitMapTable
tmnxOamLspTrMapTable
'macTraceRoute' tmnxOamMacTrL2MapTable
'mcastTraceRoute' tmnxOamMcastTrRespTable
'p2mpLspTrace' tmnxOamP2mpLspTrDSLabelTable
tmnxOamP2mpLspTrMapTable
'vccvTraceRoute' tmnxOamVccvTrNextPwSegmentTable
'vprnTraceRoute' tmnxOamVprnTrL3MapTable
tmnxOamVprnTrNextHopTable
tmnxOamVprnTrRTTable
tmnxOamTrCtlTestMode Unused Standard Results Table
-------------------- -----------------------------
'ldpTreeTrace' tmnxOamTrProbeHistoryTable
tmnxOamTrHopsTable
tmnxOamTrResultsTable
'mcastTraceRoute' tmnxOamTrHopsTable
otherwise none
The support for Service Assurance Agent (SAA) tests (i.e. tests with
tmnxOamSaaCtlTable rows) and OAM tests (i.e. tests without
tmnxOamSaaCtlTable rows) varies with the test type, as shown in the
following table.
tmnxOamTrCtlTestMode SAA Supported OAM Supported
-------------------- ------------- -------------
'bierTrace' No Yes
'ethCfmLinkTrace' Yes No
'icmpTraceRoute' Yes Yes
'ldpTreeTrace' No Yes
'lspTraceRoute' Yes Yes
'macTraceRoute' Yes Yes
'mcastTraceRoute' No Yes
'p2mpLspTrace' No Yes
'vccvTraceRoute' Yes Yes
'vprnTraceRoute' Yes Yes
| ||||
| CtmnxOamTrCtlAdminStatus | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.7 | TmnxEnabledDisabledAdminState | RC | |
column · TmnxEnabledDisabledAdminState · read-create · current The value of tmnxOamTrCtlAdminStatus specifies the administrative state of the specified trace test. An attempt to set tmnxOamTrCtlAdminStatus to 'enabled' will fail if the objects required by the trace test have not been set. When this object has the value 'enabled' an attempt to modify any of the test's configurable objects will fail. Upon completion of a trace test, the agent resets the value of this object to 'disabled'. | ||||
| CtmnxOamTrCtlFcName | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.8 | TFCName | RC | |
column · TFCName · read-create · current The value of tmnxOamTrCtlFcName specifies the forwarding class to be used when launching the probe(s). The forwarding class name must be present in the index column of TIMETRA-QOS-MIB::tFCNameTable. As shown in the following table 1. This object is applicable to a subset of the test types, and 2. The default forwarding class depends on the test type. tmnxOamTrCtlTestMode Applicable? Default -------------------- ----------- ------- bierTrace yes 'be' ethCfmLinkTrace yes 'nc' ldpTreeTrace yes 'be' lspTraceRoute yes 'be' macTraceRoute yes 'be' p2mpLspTrace yes 'be' vccvTraceRoute yes 'be' vprnTraceRoute yes 'be' otherwise no N/A For 'ethCfmLinkTrace', the forwarding class depends on whether the request is configured to egress on a network port or an access port. In the network port case, the forwarding class is the forwarding class of the pseudowire. In the access port case, the forwarding class is that of the SAP's egress encapsulation policy. For 'lspTraceRoute' this is the forwarding class of the LSP tunnel. For 'macTraceRoute' this is the forwarding class of the SDP encapsulation. For 'p2mpLspTrace' this is the forwarding class of the P2MP LSP tree. If forwarding classes are mapped by the applicable QoS policy, the probe(s) may be launched using a different forwarding class than the forwarding class specified by this object. | ||||
| CtmnxOamTrCtlProfile | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.9 | TProfile | RC | |
column · TProfile · read-create · current The value of tmnxOamTrCtlProfile specifies the profile to be used with the forwarding class specified in tmnxOamTrCtlFcName. This object is optional. As shown in the following table 1. This object is applicable to a subset of the test types, and 2. The default profile value depends on the test type. tmnxOamTrCtlTestMode Applicable? Default -------------------- ----------- ------- bierTrace yes 'out(2)' ethCfmLinkTrace yes 'in(1)' ldpTreeTrace yes 'out(2)' lspTraceRoute yes 'out(2)' macTraceRoute yes 'out(2)' p2mpLspTrace yes 'out(2)' vccvTraceRoute yes 'out(2)' vprnTraceRoute yes 'out(2)' otherwise no N/A | ||||
| CtmnxOamTrCtlTargetIpAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.10 | IpAddress | RC | obsolete |
column · IpAddress · read-create · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamTrCtlTgtAddrType and tmnxOamTrCtlTgtAddress. | ||||
| CtmnxOamTrCtlServiceId | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.11 | TmnxServId (0..2147483647) | RC | |
column · TmnxServId (0..2147483647) · read-create · current The value of tmnxOamTrCtlServiceId specifies the service ID of the service being tested. The applicability of tmnxOamTrCtlServiceId varies with the test type, as shown in the following table. tmnxOamTrCtlTestMode Applicability Related Virtual Router Object -------------------- ------------- ----------------------------- 'icmpTraceRoute' optional tmnxOamTrCtlVRtrID 'macTraceRoute' mandatory none 'mcastTraceRoute' optional tmnxOamMcastTrCtlVRtrID 'vprnTraceRoute' mandatory none otherwise not applicable none When tmnxOamTrCtlServiceId is mandatory, a non-zero value must be provided. When tmnxOamTrCtlServiceId is optional, it is used to specify a VPRN service. The test must use the VPRN service's virtual router. When a related virtual router object is shown, the interaction is described in the DESCRIPTION clause of the listed object. When tmnxOamTrCtlTestMode is 'icmpTraceRoute', tmnxOamTrCtlRouterInstanceName is the preferred object for specifying the service to be tested. Service IDs larger than 2147483647 are internal, so they are excluded from the range. The default value is the null service ID. | ||||
| CtmnxOamTrCtlDataSize | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.12 | Unsigned32 (1..9786) | RC | |
column · Unsigned32 (1..9786) · read-create · current The value of tmnxOamTrCtlDataSize specifies (directly or indirectly) the size of the trace PDU. The relevance of tmnxOamTrCtlDataSize varies with the test type, as shown in the following table. tmnxOamTrCtlTestMode Relevant? -------------------- --------- 'lspTraceRoute' yes 'macTraceRoute' yes 'p2mpLspTrace' yes 'vccvTraceRoute' yes 'vprnTraceRoute' yes otherwise no If the request PDU required for the specified test is larger than the PDU size indicated by tmnxOamTrCtlDataSize, SROS sends the smallest valid PDU larger than the size indicated. For example, if tmnxOamTrCtlDataSize is 1 when a 'vccvTraceRoute' test is started on a FEC 128 pseudowire, an 88 octet request PDU is sent. Trace route requests are sent unfragmented.
| ||||
| CtmnxOamTrCtlTimeOut | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.13 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current The value of tmnxOamTrCtlTimeOut specifies the timeout for an OAM trace probe. For 'ethCfmLinkTrace', this is the timeout for the whole test. The minimum, maximum, and default values of this object vary with the test type, as follows. tmnxOamTrCtlTestMode Minimum Maximum Default -------------------- ------- ------- ------- 'icmpTraceRoute' N/A N/A N/A 'ethCfmLinkTrace' 1 10 5 otherwise 1 60 3 If tmnxOamTrCtlTestMode is 'ethCfmLinkTrace', the value of tmnxOamTrCtlTimeOut must be less than or equal to the value of tmnxOamTrCtlInterval.
| ||||
| CtmnxOamTrCtlProbesPerHop | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.14 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamTrCtlProbesPerHop specifies the number of OAM trace probes to send per TTL. The object's configurability, range, and default vary with the test type, as shown in the following table. tmnxOamTrCtlTestMode Configurable? Min Max Default -------------------- ------------- --- --- ------- 'bierTrace' yes 1 10 1 'ethCfmLinkTrace' no n/a n/a 1 'icmpTraceRoute' yes 1 10 3 'ldpTreeTrace' no n/a n/a 1 'lspTraceRoute' yes 1 10 1 'macTraceRoute' yes 1 10 1 'mcastTraceRoute' no n/a n/a 1 'p2mpLspTrace' yes 1 10 1 'vccvTraceRoute' yes 1 10 1 'vprnTraceRoute' yes 1 10 1 The only value supported for an 'icmpTraceRoute' SAA test (i.e. a test with a tmnxOamSaaCtlTable row): 3. For an 'lspTraceRoute' test, tmnxOamTrCtlProbesPerHop is the maximum number of probes sent for the TTL. After a successful probe, the test moves on to the next TTL (if any).
| ||||
| CtmnxOamTrCtlMaxTtl | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.15 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The value of tmnxOamTrCtlMaxTtl specifies the maximum time-to-live value. The applicability and default vary with tmnxOamTrCtlTestMode, as shown in the following table. tmnxOamTrCtlTestMode Applicable? Default -------------------- ----------- ------- 'bierTrace' yes 30 'ethCfmLinkTrace' yes 64 'icmpTraceRoute' yes 30 'ldpTreeTrace' yes 30 'lspTraceRoute' yes 30 'macTraceRoute' yes 4 'mcastTraceRoute' no N/A 'p2mpLspTrace' yes 30 'vccvTraceRoute' yes 8 'vprnTraceRoute' yes 4
| ||||
| CtmnxOamTrCtlInitialTtl | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.16 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The value of tmnxOamTrCtlInitialTtl specifies the initial TTL value for the test. This enables bypassing the initial (often well known) portion of a path. The object's configurability, range, and default vary with the test type, as shown in the following table. tmnxOamTrCtlTestMode Configurable? Min Max Default -------------------- ------------- --- --- ------- 'bierTrace' yes 1 255 1 'ethCfmLinkTrace' no n/a n/a 1 'icmpTraceRoute' yes 1 255 1 'ldpTreeTrace' no n/a n/a 1 'lspTraceRoute' yes 1 255 1 'macTraceRoute' yes 1 255 1 'mcastTraceRoute' no n/a n/a 1 'p2mpLspTrace' yes 1 255 1 'vccvTraceRoute' yes 1 255 1 'vprnTraceRoute' yes 1 255 1 The only value supported for an 'icmpTraceRoute' SAA test (i.e. a test with a tmnxOamSaaCtlTable row): 1. This object does not affect the test execution for 'vccvTraceRoute', but applications may use the value to filter results for that test type. | ||||
| CtmnxOamTrCtlDSField | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.17 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The value of tmnxOamTrCtlDSField specifies the value to load in the Type of Service (TOS) octet or the Traffic Class (TC) octet of the launched ICMP echo request(s). The TOS octet is a field in the IPv4 packet header. The TC octet is a field in the IPv6 packet header. The value in the TOS or TC octet may influence the route, latency, and/or probability of loss for the echo request (and, by inference, for the associated data flow). This object is supported when tmnxOamTrCtlTestMode is 'icmpTraceRoute'. Otherwise, it is ignored. | ||||
| CtmnxOamTrCtlMaxFailures | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.18 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The value of tmnxOamTrCtlMaxFailures specifies the maximum number of consecutive timeouts allowed before terminating a trace route test. As shown in the following table 1. This object is applicable to a subset of the test types, and 2. The range and default value depend on the test type. tmnxOamTrCtlTestMode Applicable? Lower Bound Upper Bound Default -------------------- ----------- ----------- ----------- ------- 'bierTrace' yes 5 5 5 'icmpTraceRoute' yes 90 90 90 'lspTraceRoute' yes 1 255 5 'p2mpLspTrace' yes 1 10 5 'vccvTraceRoute' yes 1 255 5 otherwise no N/A N/A N/A
| ||||
| CtmnxOamTrCtlInterval | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.19 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value of tmnxOamTrCtlInterval specifies the number of seconds to wait before repeating an OAM trace test. The number of hops in a single OAM trace test is determined by the value of the corresponding tmnxOamTrCtlProbesPerHop object. After a single test completes, the number of seconds as defined by the value of tmnxOamTrCtlInterval MUST elapse before the next Nokia SROS OAM Trace Route test is started. The applicability, range, and default value of this object vary with tmnxOamTrCtlTestMode, as shown in the following table. tmnxOamTrCtlTestMode Min Max Default -------------------- --- --- ------- 'bierTrace' not applicable 'ethCfmLinkTrace' 1 10 5 'icmpTraceRoute' not applicable 'vccvTraceRoute' 1 255 1 otherwise 1 10 1
| ||||
| CtmnxOamTrCtlMaxRows | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.20 | Unsigned32 | RC | obsolete |
column · Unsigned32 · read-create · obsolete This object was marked obsolete in SROS Release 6.0R17.
| ||||
| CtmnxOamTrCtlTrapGeneration | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.21 | Bits | RC | |
column · Bits · read-create · current The value of tmnxOamTrCtlTrapGeneration specifies when and if to
generate a notification for this entry:
pathChange(0) - Generate a tmnxOamTrPathChange
notification when the current path varies from a previously
determined path.
testFailure(1) - Generate a tmnxOamTrTestFailed notification when
the full path to a target can't be determined.
testCompletion(2) - Generate a tmnxOamTrTestCompleted notification
when the test is completed.
| ||||
| CtmnxOamTrCtlCreateHopsEntries | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.22 | TruthValue | RC | obsolete |
column · TruthValue · read-create · obsolete This object was marked obsolete in SROS Release 6.0. | ||||
| CtmnxOamTrCtlSAA | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamTrCtlSAA specifies if this test is an SAA test
(Service Assurance Agent; 'true'), or an OAM test ('false'). If
there is a tmnxOamSaaCtlTable row with the specified index values,
'true' is returned. Otherwise, 'false' is returned. | ||||
| CtmnxOamTrCtlRuns | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamTrCtlRuns indicates the number of times this OAM trace test has started. | ||||
| CtmnxOamTrCtlFailures | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamTrCtlFailures indicates the number of times this OAM trace route test has failed. | ||||
| CtmnxOamTrCtlLastRunResult | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.26 | TmnxOamTestResult | RO | |
column · TmnxOamTestResult · read-only · current The value of tmnxOamTrCtlLastRunResult indicates the completion status the last time this test was executed. If this OAM test is currently in progress, this object indicates the result of the previous test run, if any. | ||||
| CtmnxOamTrCtlLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.27 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamTrCtlLastChanged indicates the time the value of a settable object in this row was last changed. | ||||
| CtmnxOamTrCtlVRtrID | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.28 | TmnxVRtrIDOrZero | RC | |
column · TmnxVRtrIDOrZero · read-create · current The value of tmnxOamTrCtlVRtrID specifies the virtual router to be
used for the test.
Zero indicates no virtual router is specified.
A non-zero value must be the index of an active row in
TIMETRA-VRTR-MIB::vRtrConfTable (i.e. tmnxOamTrCtlVRtrID must match a
valid TIMETRA-VRTR-MIB::vRtrID value).
This object is applicable if tmnxOamTrCtlTestMode is 'icmpTraceRoute'.
The table below shows the supported combinations of system-configured
virtual routers and test types.
Supported for Supported for Supported for
tmnxOamTrCtlTestMode Base ? management ? vpls-management ?
-------------------- ------------- ------------- -----------------
'icmpTraceRoute' Yes Yes Yes
When directing an 'icmpTraceRoute' test to use a virtual router, the
preferred object is tmnxOamTrCtlRouterInstanceName. | ||||
| CtmnxOamTrCtlTgtAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.29 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxOamTrCtlTgtAddrType specifies the address type of tmnxOamTrCtlTgtAddress. The values which can be used as part of a successful test depend on tmnxOamTrCtlTestMode, as follows. Test Mode tmnxOamTrCtlTgtAddrType Values Supported ---------------- ------------------------------------------ 'icmpTraceRoute' 'ipv4(1)' 'ipv6(2)' 'dns(16)' 'vprnTraceRoute' 'ipv4(1)' 'ipv6(2)' otherwise 'unknown(0)' | ||||
| CtmnxOamTrCtlTgtAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.30 | InetAddress | RC | |
column · InetAddress · read-create · current The value of tmnxOamTrCtlTgtAddress specifies the destination host address to be used when performing an OAM trace route operation. The corresponding address type is configured using tmnxOamTrCtlTgtAddrType. | ||||
| CtmnxOamTrCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.31 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxOamTrCtlSrcAddrType specifies the type of Internet address stored in tmnxOamTrCtlSrcAddress. | ||||
| CtmnxOamTrCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.32 | InetAddress (SIZE (0 | 4 | 16)) | RC | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-create · current The value of tmnxOamTrCtlSrcAddress specifies the IP host address to be used as the source when performing an OAM Trace Route operation. This object is valid only when the tmnxOamTrCtlTestMode has a value of 'icmpTraceRoute', 'lspTraceRoute', or 'vccvTraceRoute'. | ||||
| CtmnxOamTrCtlWaitMilliSec | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.33 | Unsigned32 (10..60000) | RC | |
column · Unsigned32 (10..60000) · read-create · current The value of tmnxOamTrCtlWaitMilliSec specifies the time in milliseconds to wait for a response before sending the next probe. This object is valid only for 'icmpTraceRoute' tests.
| ||||
| CtmnxOamTrCtlRouterInstanceName | 1.3.6.1.4.1.6527.3.1.2.11.2.3.1.34 | TLNamedItemOrEmpty | RC | |
column · TLNamedItemOrEmpty · read-create · current The value of tmnxOamTrCtlRouterInstanceName specifies the name of the
service or router instance to be used by an 'icmpTraceRoute' test.
The following values are supported:
1. '' (i.e. the empty string),
2. 'Base',
3. 'management',
4. 'vpls-management',
5. A VPRN service name (i.e. a TIMETRA-SERV-MIB::svcName, with
TIMETRA-SERV-MIB::svcType = 'vprn(4)').
Names other than the names listed above are accepted, but will not
lead to a successful test.
The service or virtual router to be used by an 'icmpTraceRoute' test
can be specified using tmnxOamTrCtlVRtrID, tmnxOamTrCtlServiceId,
and/or tmnxOamTrCtlRouterInstanceName.
The following two combinations of the three objects are supported:
1. tmnxOamTrCtlVRtrID = 0,
tmnxOamTrCtlServiceId = 0,
tmnxOamTrCtlRouterInstanceName != ''.
This is the preferred approach.
2. One or both of tmnxOamTrCtlVRtrID and tmnxOamTrCtlServiceId has a
non-zero value,
tmnxOamTrCtlRouterInstanceName = ''.
An attempt to change TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 away
from 'classic(1)' is blocked if any tmnxOamTrCtlRouterInstanceName is
empty for an 'icmpTraceRoute' test.
When TIMETRA-SYSTEM-MIB::tmnxSysMgmtIfWriteMode.0 is not 'classic(1)',
each 'icmpTraceRoute' test must continue to have a non-empty
tmnxOamTrCtlRouterInstanceName. | ||||
| TtmnxOamTrResultsTable | 1.3.6.1.4.1.6527.3.1.2.11.2.4 | NA | ||
table · not-accessible · current tmnxOamTrResultsTable contains the run-level test results for OAM trace tests. TTL-level test results for trace tests reside in tmnxOamTrHopsTable. Probe-level test results for trace tests reside in tmnxOamTrProbeHistoryTable. | ||||
| RtmnxOamTrResultsEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1 | NA | ||
row · not-accessible · current tmnxOamTrResultsEntry contains the run-level test results for one OAM trace test run. A row is created when a trace test is enabled (using tmnxOamTrCtlAdminStatus). A row is destroyed when: 1. The corresponding test configuration is destroyed (using tmnxOamTrCtlRowStatus), or 2. Results are cleared for the test (using TIMETRA-CLEAR-MIB::tmnxClearAction), or 3. A new run result is available, and the limit on the number of run results retained per test (3, currently) has been reached. In that case, the oldest run result row is destroyed. | ||||
| CtmnxOamTrResultsOperStatus | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamTrResultsOperStatus indicates the operational state of the specified test run. 'enabled(1)' indicates the test is running.
| ||||
| CtmnxOamTrResultsCurHopCount | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of tmnxOamTrResultsCurHopCount indicates 1. For a running test, the TTL currently being probed. 2. For a completed test, the final TTL probed.
| ||||
| CtmnxOamTrResultsCurProbeCount | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of tmnxOamTrResultsCurProbeCount indicates 1. For a running test, the current probe number. 2. For a completed test, the final probe number. The value is in the range 1..tmnxOamTrCtlProbesPerHop.
| ||||
| CtmnxOamTrResultsIpTgtAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.4 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamTrResultsTgtAddrType and tmnxOamTrResultsTgtAddress. | ||||
| CtmnxOamTrResultsTestAttempts | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.5 | Unsigned32 | RO | obsolete |
column · Unsigned32 · read-only · obsolete This object was marked obsolete in SROS Release 3.0
| ||||
| CtmnxOamTrResultsTestSuccesses | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.6 | Unsigned32 | RO | obsolete |
column · Unsigned32 · read-only · obsolete This object was marked obsolete in SROS Release 3.0.
| ||||
| CtmnxOamTrResultsLastGoodPath | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current The value of tmnxOamTrResultsLastGoodPath indicates the date and time when the last complete path was determined. 1970-Jan-01 00:00:00.0 UTC is returned when a complete path was not determined. | ||||
| CtmnxOamTrResultsTestRunIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.8 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamTrResultsTestRunIndex specifies the test run INDEX of the row. The first run of a test is assigned run index 1. The second run of a test is assigned run index 2. Etc. | ||||
| CtmnxOamTrResultsTgtAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.9 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamTrResultsTgtAddrType indicates the address type of tmnxOamTrResultsTgtAddress. | ||||
| CtmnxOamTrResultsTgtAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.10 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamTrResultsTgtAddress indicates the IP destination address of the test run. If the configured destination address of the test has type 'dns(16)', this is the corresponding IPv4 or IPv6 address (if available). tmnxOamTrResultsTgtAddrType is 'unknown(0)' when an IP destination address for the test is unavailable. | ||||
| CtmnxOamTrResultsTestRunResult | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.11 | TmnxOamTestResult | RO | |
column · TmnxOamTestResult · read-only · current The value of tmnxOamTrResultsTestRunResult indicates the result of the specified test run. | ||||
| CtmnxOamTrResultsSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.12 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamTrResultsSrcAddrType indicates the address type of tmnxOamTrResultsSrcAddress. | ||||
| CtmnxOamTrResultsSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.13 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamTrResultsSrcAddress indicates the IP source
address of the test run.
tmnxOamTrResultsSrcAddrType is 'unknown(0)' when
1. The test type is not 'lspTraceRoute', or
2. The test type is 'lspTraceRoute', and the test's source address
cannot be determined. | ||||
| CtmnxOamTrResultsSize | 1.3.6.1.4.1.6527.3.1.2.11.2.4.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrResultsSize indicates the size of each request
packet sent for the test run.
Zero is returned when the test type is not 'lspTraceRoute'.
Related objects:
tmnxOamTrCtlDataSize,
tmnxOamTrProbeHistorySize.
| ||||
| TtmnxOamTrProbeHistoryTable | 1.3.6.1.4.1.6527.3.1.2.11.2.5 | NA | ||
table · not-accessible · current tmnxOamTrProbeHistoryTable contains per-probe results for most trace route tests. Exceptions are noted in the tmnxOamTrCtlTestMode DESCRIPTION clause. | ||||
| RtmnxOamTrProbeHistoryEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1 | NA | ||
row · not-accessible · current A tmnxOamTrProbeHistoryEntry is created by the system when the result of a trace route probe launch is determined. Rows are destroyed when the corresponding tmnxOamTrHopsTable row is destroyed. | ||||
| CtmnxOamTrProbeHistoryIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamTrProbeHistoryIndex specifies a probe belonging to
an OAM Trace Route test run.
The probes are numbered sequentially across the whole test run,
starting at one.
Here is an example of a test run that uses tmnxOamTrProbeHistoryIndex
to ensure each probe has a unique INDEX.
Configuration:
tmnxOamTrCtlTestMode = lspTraceRoute(2)
tmnxOamLspTrCtlTestSubMode = srTe(6)
tmnxOamLspTrCtlDownstreamMapTlv = ddmap(2)
tmnxOamTrCtlProbesPerHop = 2
Probes (note there are 4 probes (not 2) for hop 1, for example):
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.1.1.1 = 1803 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.2.1.2 = 1593 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.3.1.1 = 2405 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.4.1.2 = 1890 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.5.2.1 = 2579 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.6.2.2 = 2729 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.7.2.1 = 2744 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.8.2.2 = 2487 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.9.3.1 = 2983 microsec
tmnxOamTrProbeHistoryResponse.'a'.'z'.2.10.3.2 = 2182 microsec | ||||
| CtmnxOamTrProbeHistoryHopIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.2 | Unsigned32 (1..255) | NA | |
column · Unsigned32 (1..255) · not-accessible · current The value of tmnxOamTrProbeHistoryHopIndex specifies the number of hops travelled by the outbound trace route request. The initial value used for a particular test is configured using tmnxOamTrCtlInitialTtl. | ||||
| CtmnxOamTrProbeHistoryProbeIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.3 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current The value of tmnxOamTrProbeHistoryProbeIndex specifies a trace route reply, in the context of a hop. The number of probes per hop for a particular test is configured using tmnxOamTrCtlProbesPerHop. See the DESCRIPTION of tmnxOamTrProbeHistoryIndex for more information. | ||||
| CtmnxOamTrProbeHistoryIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.4 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamTrProbeHistoryAddrType and tmnxOamTrProbeHistoryAddress. | ||||
| CtmnxOamTrProbeHistoryResponse | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrProbeHistoryResponse indicates the round trip time for the specified probe. Zero is returned when the information is not available (e.g. the probe timed out).
| ||||
| CtmnxOamTrProbeHistoryOneWayTime | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrProbeHistoryOneWayTime indicates the outbound trip time for the specified probe. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrProbeHistoryStatus | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.7 | TmnxOamResponseStatus | RO | |
column · TmnxOamResponseStatus · read-only · current The value of tmnxOamTrProbeHistoryStatus indicates the outcome of the probe. Example values: 'responseReceived', 'requestTimedOut'. | ||||
| CtmnxOamTrProbeHistoryLastRC | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrProbeHistoryLastRC indicates the last test-type-specific reply code received. The relevance of tmnxOamTrProbeHistoryLastRC depends on tmnxOamTrCtlTestMode, as follows. tmnxOamTrCtlTestMode Relevant? -------------------- --------- 'bierTrace' no 'ethCfmLinkTrace' no 'icmpTraceRoute' yes 'ldpTreeTrace' no 'lspTraceRoute' yes 'macTraceRoute' yes 'mcastTraceRoute' no 'p2mpLspTrace' yes 'vccvTraceRoute' yes 'vprnTraceRoute' no For 'icmpTraceRoute', a) Zero indicates no reply code is available (e.g. in the timeout case). b) 1..65535 indicates the value is the ICMP|ICMPv6 Code and ICMP|ICMPv6 Type copied from the reply packet header. tmnxOamTrProbeHistoryLastRC bits 0 to 7 (i.e. the least significant byte) contain the ICMP|ICMPv6 Type. Bits 8 to 15 contain the ICMP|ICMPv6 Code. c) 65536 indicates (for a test with tmnxOamIcmpTrCtlProtocol='tcp') the TCP port probed on the destination node is open. d) 65537 indicates (for a test with tmnxOamIcmpTrCtlProtocol='tcp') the TCP port probed on the destination node is closed. | ||||
| CtmnxOamTrProbeHistoryTime | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.9 | DateAndTime | RO | |
column · DateAndTime · read-only · current The value of tmnxOamTrProbeHistoryTime indicates the date and time when the outcome of the specified probe was determined. | ||||
| CtmnxOamTrProbeHistoryResponsePlane | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.10 | TmnxOamTestResponsePlane | RO | |
column · TmnxOamTestResponsePlane · read-only · current The value of tmnxOamTrProbeHistoryResponsePlane indicates the type of response plane this trace route response was received on. | ||||
| CtmnxOamTrProbeHistoryAddressType | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.11 | TmnxOamAddressType | RO | |
column · TmnxOamAddressType · read-only · current The value of tmnxOamTrProbeHistoryAddressType indicates the type of binding address information returned in response to a test. When the test has the tmnxOamTrCtlTestMode value 'ethCfmLinkTrace', 'unknown' is returned. For 'macTraceRoute', three types of address are applicable - 'sapId', 'localCpu', and 'sdpId'. Address type of 'sdpId' is a special case used specifically to indicate that the probe was traversing a b-vpls node in a PBB network (but where destination MAC is not necessarily known to the b-vpls node). | ||||
| CtmnxOamTrProbeHistorySapId | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.12 | TmnxStrSapId | RO | |
column · TmnxStrSapId · read-only · current The value of tmnxOamTrProbeHistorySapId indicates the name of the access port of the SAP supporting the requested IP address returned in response to a 'vprnTraceRoute' probe. If the value of tmnxOamTrProbeHistoryAddressType is not 'sapId', this object is not relevant and MUST have a null string ''. | ||||
| CtmnxOamTrProbeHistoryVersion | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrProbeHistoryVersion indicates the protocol version for this OAM trace reply. | ||||
| CtmnxOamTrProbeHistoryRouterID | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.15 | RouterID | RO | obsolete |
column · RouterID · read-only · obsolete This object was marked obsolete in SROS release 13.0 R1. | ||||
| CtmnxOamTrProbeHistoryIfIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.16 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The value of tmnxOamTrProbeHistoryIfIndex indicates for a 'lspTraceRoute' or 'vccvTraceRoute' probe the ifIndex value of the interface that this probe was transmitted from. For other types of probes, this value is not significant and zero is returned. | ||||
| CtmnxOamTrProbeHistoryDataLen | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrProbeHistoryDataLen indicates the length of the echo reply. A valid value is returned when the test has a tmnxOamTrCtlTestMode value of 'icmpTraceRoute', 'lspTraceRoute', 'p2mpLspTrace', or 'vccvTraceRoute'. Otherwise, this value is not significant and zero is returned.
| ||||
| CtmnxOamTrProbeHistorySize | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrProbeHistorySize indicates the size (in octets) of some or all of the request packet sent. The encapsulation counted (e.g. including the Ethernet header?) varies with the test type (i.e. tmnxOamTrCtlTestMode), and/or the test sub-type. Zero is returned if no probe was transmitted.
| ||||
| CtmnxOamTrProbeHistoryInOneWayTime | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrProbeHistoryInOneWayTime indicates the inbound trip time for the specified probe. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrProbeHistoryAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.20 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamTrProbeHistoryAddrType indicates the address type of tmnxOamTrProbeHistoryAddress. | ||||
| CtmnxOamTrProbeHistoryAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.21 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamTrProbeHistoryAddress indicates the IP address of the replying node for the specified trace request. | ||||
| CtmnxOamTrProbeHistorySrcGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.22 | TmnxMplsTpGlobalID | RO | |
column · TmnxMplsTpGlobalID · read-only · current The value of tmnxOamTrProbeHistorySrcGlobalId indicates the source MPLS-TP global identifier of the replying node. The value is copied from the reply's RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamTrCtlTestMode is 'lspTraceRoute' or 'vccvTraceRoute'. Otherwise, zero is returned. | ||||
| CtmnxOamTrProbeHistorySrcNodeId | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.23 | TmnxMplsTpNodeID | RO | |
column · TmnxMplsTpNodeID · read-only · current The value of tmnxOamTrProbeHistorySrcNodeId indicates the source MPLS-TP node identifier of the replying node. The value is copied from the reply's RFC 6426 Source Identifier TLV. If the TLV is absent, zero is returned. This value is relevant when tmnxOamTrCtlTestMode is 'lspTraceRoute' or 'vccvTraceRoute'. Otherwise, zero is returned. | ||||
| CtmnxOamTrProbeHistorySdpBindId | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.24 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tmnxOamTrProbeHistorySdpBindId indicates the SDP binding provided by the remote system. The value of tmnxOamTrProbeHistorySdpBindId is relevant when tmnxOamTrProbeHistoryAddressType is 'sdpBindId(9)'. | ||||
| CtmnxOamTrProbeHistoryRtrnSubcode | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrProbeHistoryRtrnSubcode indicates the value present in an MPLS echo reply's RFC 4379 Return Subcode (RSC) field. A valid value is returned when the test has a tmnxOamTrCtlTestMode value of 'lspTraceRoute' or 'ldpTreeTrace'. Otherwise, zero is returned. | ||||
| CtmnxOamTrProbeHistoryNtwrkIfName | 1.3.6.1.4.1.6527.3.1.2.11.2.5.1.26 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tmnxOamTrProbeHistoryNtwrkIfName indicates the network interface name provided by the replying node. Network interface names are configured using TIMETRA-VRTR-MIB::vRtrIfName. The value of this object is the empty string when the value of tmnxOamTrProbeHistoryAddressType is not 'networkInterface(11)'. | ||||
| TtmnxOamTrHopsTable | 1.3.6.1.4.1.6527.3.1.2.11.2.6 | NA | ||
table · not-accessible · current tmnxOamTrHopsTable contains the TTL-level test results for OAM trace tests. Run-level test results for trace tests reside in tmnxOamTrResultsTable. Probe-level test results for trace tests reside in tmnxOamTrProbeHistoryTable. | ||||
| RtmnxOamTrHopsEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1 | NA | ||
row · not-accessible · current tmnxOamTrHopsEntry contains the TTL-level test results for one TTL of one OAM trace test run. A row is created when a TTL is probed by a trace test run. Rows are destroyed when the corresponding tmnxOamTrResultsTable row is destroyed. | ||||
| CtmnxOamTrHopsHopIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The value of tmnxOamTrHopsHopIndex specifies the TTL of the trace test run results reported by this row. | ||||
| CtmnxOamTrHopsIpTgtAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.2 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamTrHopsTgtAddrType and tmnxOamTrHopsTgtAddrType. | ||||
| CtmnxOamTrHopsMinRtt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsMinRtt indicates the minimum round trip time for the specified TTL of the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsMaxRtt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsMaxRtt indicates the maximum round trip time for the specified TTL of the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsAverageRtt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsAverageRtt indicates the average round trip time for the specified TTL of the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsRttSumOfSquares | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsRttSumOfSquares indicates the least significant 32 bits of tmnxOamTrHopsRttHCSumSquares.
| ||||
| CtmnxOamTrHopsMinTt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsMinTt indicates the minimum outbound trip time for the specified TTL of the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsMaxTt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsMaxTt indicates the maximum outbound trip time for the specified TTL of the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsAverageTt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsAverageTt indicates the average outbound trip time for the specified TTL of the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsTtSumOfSquares | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsTtSumOfSquares indicates the least significant 32 bits of tmnxOamTrHopsTtHCSumSquares.
| ||||
| CtmnxOamTrHopsSentProbes | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsSentProbes indicates the number of probes sent for the specified TTL of the specified test run. | ||||
| CtmnxOamTrHopsProbeResponses | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsProbeResponses indicates the number of responses received for the specified TTL of the specified test run. | ||||
| CtmnxOamTrHopsLastGoodProbe | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.13 | DateAndTime | RO | |
column · DateAndTime · read-only · current The value of tmnxOamTrHopsLastGoodProbe indicates the date and time when the most recent response was received for the specified TTL of the specified test run. 1970-Jan-01 00:00:00.0 UTC is returned if a response has not been received. | ||||
| CtmnxOamTrHopsMinInTt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsMinInTt indicates the minimum inbound trip time for the specified TTL of the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsMaxInTt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsMaxInTt indicates the maximum inbound trip time for the specified TTL of the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsAverageInTt | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsAverageInTt indicates the average inbound trip time for the specified TTL of the specified test run. The value is valid if the two nodes have proper clock synchronization. Otherwise, for example, a negative value can be returned. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsInTtSumOfSqrs | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsInTtSumOfSqrs indicates the least significant 32 bits of tmnxOamTrHopsInTtHCSumSqrs.
| ||||
| CtmnxOamTrHopsOutJitter | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsOutJitter indicates the amount of jitter in the outbound trip times for the specified TTL of the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsInJitter | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsInJitter indicates the amount of jitter in the inbound trip times for the specified TTL of the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsRtJitter | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamTrHopsRtJitter indicates the amount of jitter in the round trip times for the specified TTL of the specified test run. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsProbeTimeouts | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsProbeTimeouts indicates the number of probes that timed out for the specified TTL of the specified test run. | ||||
| CtmnxOamTrHopsProbeFailures | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.26 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamTrHopsProbeFailures indicates the number of probes that failed to be transmitted plus the number of probes that timed out. | ||||
| CtmnxOamTrHopsTgtAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.27 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamTrHopsTgtAddrType indicates the address type of tmnxOamTrHopsTgtAddress. | ||||
| CtmnxOamTrHopsTgtAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.28 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamTrHopsTgtAddress indicates the IP address of the replying node for the specified TTL of the specified test run. | ||||
| CtmnxOamTrHopsRttOFSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamTrHopsRttOFSumSquares indicates the number of times tmnxOamTrHopsRttSumOfSquares overflowed. | ||||
| CtmnxOamTrHopsRttHCSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.30 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamTrHopsRttHCSumSquares indicates the sum of squares of the round trip times for the specified TTL of the specified test run. Its purpose is to enable the standard deviation calculation. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsTtOFSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.31 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamTrHopsTtOFSumSquares indicates the number of times tmnxOamTrHopsTtSumOfSquares overflowed. | ||||
| CtmnxOamTrHopsTtHCSumSquares | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.32 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamTrHopsTtHCSumSquares indicates the sum of squares of the outbound trip times for the specified TTL of the specified test run. Its purpose is to enable the standard deviation calculation. Zero is returned when the information is not available.
| ||||
| CtmnxOamTrHopsInTtOFSumSqrs | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.33 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamTrHopsInTtOFSumSqrs indicates the number of times tmnxOamTrHopsInTtSumOfSqrs overflowed. | ||||
| CtmnxOamTrHopsInTtHCSumSqrs | 1.3.6.1.4.1.6527.3.1.2.11.2.6.1.34 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamTrHopsInTtHCSumSqrs indicates the sum of squares of the inbound trip times for the specified TTL of the specified test run. Its purpose is to enable the standard deviation calculation. Zero is returned when the information is not available.
| ||||
| TtmnxOamMacTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.7 | NA | ||
table · not-accessible · current tmnxOamMacTrCtlTable contains configuration information for 'macTraceRoute' tests. | ||||
| RtmnxOamMacTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.7.1 | NA | ||
row · not-accessible · current tmnxOamMacTrCtlEntry contains configuration information for one 'macTraceRoute' test. SROS creates a row when tmnxOamTrCtlTestMode is set to 'macTraceRoute'. SROS destroys a row when the corresponding tmnxOamTrCtlTable row is destroyed. | ||||
| CtmnxOamMacTrCtlTargetMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.7.1.1 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamMacTrCtlTargetMacAddr is a 6-octet value that specifies the target MAC address to be used in the query request for performing an OAM Mac Trace Route operation when tmnxOamTrCtlTestMode has a value of 'macTraceRoute'. | ||||
| CtmnxOamMacTrCtlSourceMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.7.1.2 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamMacTrCtlSourceMacAddr is a 6-octet value that specifies the MAC address to be used as the source in the query request for performing an OAM MAC Trace Route operation when tmnxOamTrCtlTestMode has a value of 'macTraceRoute'. | ||||
| CtmnxOamMacTrCtlSendControl | 1.3.6.1.4.1.6527.3.1.2.11.2.7.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamMacTrCtlSendControl specifies whether the outbound MAC trace route packet will use the data plane or the control plane. When the value is 'false', the packet is sent using the data plane. As of SROS release 13.0 R1, a test cannot be started if tmnxOamMacTrCtlSendControl is 'true'. A test is started using tmnxOamTrCtlAdminStatus. This object will be marked obsolete in a future release. | ||||
| CtmnxOamMacTrCtlReplyControl | 1.3.6.1.4.1.6527.3.1.2.11.2.7.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamMacTrCtlReplyControl is 'true', the OAM Mac Trace Route response is returned using the control plane. If its value is 'false', the packet is sent via the data plane. | ||||
| TtmnxOamMacTrL2MapTable | 1.3.6.1.4.1.6527.3.1.2.11.2.8 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'macTraceRoute' probe operation when a L2 Mapping TLV was returned. Each row represents a single L2FEC TLV within the L2 Mapping TLV. A single L2 mapping entry is returned if the 'macTraceRoute' replier knows the requested VPN ID and has a binding for the requested MAC address. Multiple downstream L2 mappings that specify the replier's flooding domain may be returned if the replier has no bindings for the MAC address. An entry in this table is created when the result of an OAM 'macTraceRoute' probe is determined. Entries are removed from this table when the corresponding tmnxOamTrProbeHistoryEntry is deleted. | ||||
| RtmnxOamMacTrL2MapEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamMacTrL2MapTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamMacTrL2MapEntry belongs to. The third index element identifies a particular OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Nokia SROS OAM Trace Route operation. Note that in the case of a successful 'macTraceRoute' reply there will be only one row entry created. However there may also be one or more error replies. The seventh index selects a single L2 mapping entry within a specific probe reply. | ||||
| CtmnxOamMacTrL2MapIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The tmnxOamMacTrL2MapIndex selects a single L2 mapping entry within a specific 'macTraceRoute' probe reply. The agent starts assigning tmnxOamMacTrL2MapIndex values at 1. | ||||
| CtmnxOamMacTrL2MapRouterID | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The value of tmnxOamMacTrL2MapRouterID is the router ID for this L2 mapping entry. | ||||
| CtmnxOamMacTrL2MapLabel | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.3 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamMacTrL2MapLabel is the label used by the router for the L2FEC or VC ID specified by this L2 mapping entry. | ||||
| CtmnxOamMacTrL2MapProtocol | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.4 | TmnxOamSignalProtocol | RO | |
column · TmnxOamSignalProtocol · read-only · current The value of tmnxOamMacTrL2MapProtocol is the signaling protocol used by the router for the L2FEC or VC ID specified by this L2 mapping entry. | ||||
| CtmnxOamMacTrL2MapVCType | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.5 | TmnxOamVcType | RO | |
column · TmnxOamVcType · read-only · current The value of tmnxOamMacTrL2MapVCType indicates the class of VC ID given in tmnxOamMacTrL2MapVCID. | ||||
| CtmnxOamMacTrL2MapVCID | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.6 | TmnxVcId | RO | |
column · TmnxVcId · read-only · current The value of tmnxOamMacTrL2MapVCID is the VC ID associated with the label used by the L2FEC specified by this L2 mapping entry. | ||||
| CtmnxOamMacTrL2MapDirection | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamMacTrL2MapDirection indicates the direction that this L2 mapping entry is in relation to the node that returned the 'macTraceRoute' reply.
| ||||
| CtmnxOamMacTrL2MapSdpId | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.8 | SdpId | RO | |
column · SdpId · read-only · current The value of tmnxOamMacTrL2MapSdpId indicates the ID of the SDP supporting the L2 mapping entry that returned the reply. If this mapping is not a SDP, this object is not relevant and MUST return a value of '0'. | ||||
| CtmnxOamMacTrL2MapSapName | 1.3.6.1.4.1.6527.3.1.2.11.2.8.1.9 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tmnxOamMacTrL2MapSapName indicates the SAP name when the downstream of the responder is a SAP. If the downstream responder is not a SAP, this object is not relevant and MUST return a zero length empty string. | ||||
| TtmnxOamLspTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.9 | NA | ||
table · not-accessible · current Each row in tmnxOamLspTrCtlTable contains the LSP-specific
configuration information needed to launch an LSP (Label Switched Path)
trace route test. The rest of the configuration information needed to
launch the test resides in the corresponding row of tmnxOamTrCtlTable.
Nine types of LSP trace route tests are supported. An abbreviated
name for each test type is defined in the following table (for use in a
subsequent table). The test type's tmnxOamLspTrCtlTestSubMode code
point is shown as well.
Test Sub Mode Abbreviated Test Type Name(s)
--------------------- -------------------------------
'unspecified (1)' LDP, RSVP
'static (2)' TPST (Transport Profile Static)
'bgpLabeledPrefix(3)' BGP
'srIsis (4)' ISIS
'srOspf (5)' OSPF
'srTe (6)' SRTE
'srPolicy (7)' SRPL
'srOspf3 (8)' OSP3
The following table has a row for each LSP trace route test type,
showing the mandatory and optional objects applicable to the test
type.
Test
Type Mandatory Objects Optional Objects
---- -------------------------------- ---------------------------------
BGP tmnxOamLspTrCtlLdpPrefixType *tmnxOamLspTrCtlNhAddressType
tmnxOamLspTrCtlLdpPrefix *tmnxOamLspTrCtlNhAddress
tmnxOamLspTrCtlLdpPrefixLen tmnxOamLspTrCtlNhIntfName
tmnxOamLspTrCtlTestSubMode #tmnxOamLspTrCtlPathDestType
#tmnxOamLspTrCtlPathDest
ISIS tmnxOamLspTrCtlLdpPrefixType tmnxOamLspTrCtlIgpInstance
tmnxOamLspTrCtlLdpPrefix *tmnxOamLspTrCtlNhAddressType
tmnxOamLspTrCtlLdpPrefixLen *tmnxOamLspTrCtlNhAddress
tmnxOamLspTrCtlTestSubMode tmnxOamLspTrCtlNhIntfName
#tmnxOamLspTrCtlPathDestType
#tmnxOamLspTrCtlPathDest
tmnxOamLspTrCtlFlexAlgo
LDP tmnxOamLspTrCtlLdpPrefixType *tmnxOamLspTrCtlNhAddressType
tmnxOamLspTrCtlLdpPrefix *tmnxOamLspTrCtlNhAddress
tmnxOamLspTrCtlLdpPrefixLen tmnxOamLspTrCtlNhIntfName
#tmnxOamLspTrCtlPathDestType
#tmnxOamLspTrCtlPathDest
OSPF tmnxOamLspTrCtlLdpPrefixType tmnxOamLspTrCtlIgpInstance
tmnxOamLspTrCtlLdpPrefix *tmnxOamLspTrCtlNhAddressType
tmnxOamLspTrCtlLdpPrefixLen *tmnxOamLspTrCtlNhAddress
tmnxOamLspTrCtlTestSubMode tmnxOamLspTrCtlNhIntfName
#tmnxOamLspTrCtlPathDestType
#tmnxOamLspTrCtlPathDest
tmnxOamLspTrCtlFlexAlgo
OSP3 tmnxOamLspTrCtlLdpPrefixType tmnxOamLspTrCtlIgpInstance
tmnxOamLspTrCtlLdpPrefix *tmnxOamLspTrCtlNhAddressType
tmnxOamLspTrCtlLdpPrefixLen *tmnxOamLspTrCtlNhAddress
tmnxOamLspTrCtlTestSubMode tmnxOamLspTrCtlNhIntfName
#tmnxOamLspTrCtlPathDestType
#tmnxOamLspTrCtlPathDest
RSVP tmnxOamLspTrCtlLspName tmnxOamLspTrCtlPathName
SRPL tmnxOamLspTrCtlSrPlcyColor tmnxOamLspTrCtlSrPlcySegList
tmnxOamLspTrCtlSrPlcyEndPtAddr *tmnxOamLspTrCtlNhAddressType
tmnxOamLspTrCtlSrPlcyEndPtAddT *tmnxOamLspTrCtlNhAddress
tmnxOamLspTrCtlTestSubMode tmnxOamLspTrCtlNhIntfName
#tmnxOamLspTrCtlPathDestType
#tmnxOamLspTrCtlPathDest
SRTE tmnxOamLspTrCtlLspName *tmnxOamLspTrCtlNhAddressType
tmnxOamLspTrCtlTestSubMode *tmnxOamLspTrCtlNhAddress
tmnxOamLspTrCtlNhIntfName
#tmnxOamLspTrCtlPathDestType
#tmnxOamLspTrCtlPathDest
tmnxOamLspTrCtlPathName
TPST tmnxOamLspTrCtlLspName tmnxOamLspTrCtlAssocChannel
tmnxOamLspTrCtlTestSubMode tmnxOamLspTrCtlForce
tmnxOamLspTrCtlMplsTpPathType
ALL none tmnxOamLspTrCtlDownstreamMapTlv
tmnxOamTrCtlDataSize
tmnxOamTrCtlFcName
tmnxOamTrCtlInitialTtl
tmnxOamTrCtlInterval
tmnxOamTrCtlMaxFailures
tmnxOamTrCtlMaxTtl
tmnxOamTrCtlProbesPerHop
tmnxOamTrCtlProfile
*tmnxOamTrCtlSrcAddrType
*tmnxOamTrCtlSrcAddress
tmnxOamTrCtlTimeOut
---- -------------------------------- ---------------------------------
In the table above,
1. The optional objects in the ALL row apply to all LSP trace route
test types.
2. Asterisks (*) mark a set of optional objects which must all be
specified, or must all be unspecified.
3. Octothorpes (#) mark a separate set of optional objects which must
all be specified, or must all be unspecified.
4. There are four supported combinations of
tmnxOamLspTrCtlNhAddressType, tmnxOamLspTrCtlNhAddress,
tmnxOamLspTrCtlNhIntfName, tmnxOamLspTrCtlPathDestType, and
tmnxOamLspTrCtlPathDest, as follows:
a) all unspecified
b) tmnxOamLspTrCtlPathDestType and tmnxOamLspTrCtlPathDest
c) tmnxOamLspTrCtlPathDestType, tmnxOamLspTrCtlPathDest, and
tmnxOamLspTrCtlNhIntfName
d) tmnxOamLspTrCtlPathDestType, tmnxOamLspTrCtlPathDest,
tmnxOamLspTrCtlNhAddressType, and tmnxOamLspTrCtlNhAddress
When an object combination other than a combination listed above is
specified, values will be rejected or ignored, or the test will fail. | ||||
| RtmnxOamLspTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1 | NA | ||
row · not-accessible · current The system creates a row in tmnxOamLspTrCtlTable when tmnxOamTrCtlTestMode is set to 'lspTraceRoute'. The system deletes a row in tmnxOamLspTrCtlTable when the corresponding row in tmnxOamTrCtlTable is deleted. | ||||
| CtmnxOamLspTrCtlVRtrID | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.1 | TmnxVRtrID | RW | obsolete |
column · TmnxVRtrID · read-write · obsolete tmnxOamLspTrCtlVRtrID was marked obsolete in SROS Release 6.0R15 and replaced with tmnxOamTrCtlVRtrID in tmnxOamTrCtlTable. | ||||
| CtmnxOamLspTrCtlLspName | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.2 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current The value of tmnxOamLspTrCtlLspName specifies the name of the LSP for
this LSP trace route test.
When the test is started, if this name is not empty, there must be a
TIMETRA-MPLS-MIB::vRtrMplsLspTable row with:
1. tmnxOamLspTrCtlLspName equal to
TIMETRA-MPLS-MIB::vRtrMplsLspName, AND
2. TIMETRA-VRTR-MIB::vRtrID equal to 1, AND
3. TIMETRA-MPLS-MIB::vRtrMplsLspType equal to 'dynamic(2)',
'bypassOnly(4)', or 'mplsTp(7)'.
Otherwise, the test will fail.
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlPathName | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.3 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current The value of tmnxOamLspTrCtlPathName specifies the name of the Path (LSP) for this LSP trace route test. When the test is started, if this name is not empty, there must be a matching name in the column MPLS-TE-MIB::mplsTunnelName. Otherwise, the test will fail. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlLdpIpPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.4 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete tmnxOamLspTrCtlLdpIpPrefix was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamLspTrCtlLdpPrefixType and tmnxOamLspTrCtlLdpPrefix. | ||||
| CtmnxOamLspTrCtlLdpIpPrefixLen | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.5 | IpAddressPrefixLength | RW | obsolete |
column · IpAddressPrefixLength · read-write · obsolete tmnxOamLspTrCtlLdpIpPrefixLen was marked obsolete in SROS Release 4.0 and replaced with InetAddress object tmnxOamLspTrCtlLdpPrefixLen. | ||||
| CtmnxOamLspTrCtlLdpPrefixType | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.6 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspTrCtlLdpPrefixType specifies the type of Internet address stored in tmnxOamLspTrCtlLdpPrefix. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlLdpPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.7 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspTrCtlLdpPrefix, along with tmnxOamLspTrCtlLdpPrefixType and tmnxOamLspTrCtlLdpPrefixLen, specifies the destination prefix for this LSP trace route test. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlLdpPrefixLen | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.8 | InetAddressPrefixLength | RW | |
column · InetAddressPrefixLength · read-write · current The value of tmnxOamLspTrCtlLdpPrefixLen specifies the Internet address prefix length of tmnxOamLspTrCtlLdpPrefix. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamLspTrCtlPathDestType | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.9 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspTrCtlPathDestType specifies the type of Internet address stored in tmnxOamLspTrCtlPathDest. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlPathDest | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.10 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspTrCtlPathDest specifies a unique path in a multipath setup for this OAM LSP trace route to traverse. This address is used as part of a hash key to select the appropriate ECMP to the destination. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlNhIntfName | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.11 | TNamedItemOrEmpty | RW | |
column · TNamedItemOrEmpty · read-write · current The value of tmnxOamLspTrCtlNhIntfName specifies the name of the next
hop interface to be used when launching the LSP trace route test.
When the test is started, if this name is not empty, there must be a
TIMETRA-VRTR-MIB::vRtrIfTable row with:
1. tmnxOamLspTrCtlNhIntfName equal to TIMETRA-VRTR-MIB::vRtrIfName,
AND
2. TIMETRA-VRTR-MIB::vRtrID equal to 1.
Otherwise, the test will fail.
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlNhAddressType | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.12 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspTrCtlNhAddressType specifies the type of Internet address stored in tmnxOamLspTrCtlNhAddress. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlNhAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.13 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspTrCtlNhAddress specifies the interface address to the next hop which will be used to launch the LSP trace route test. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlDownstreamMapTlv | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.14 | TmnxOamMplsEchoDownMapTlvOrNone | RW | |
column · TmnxOamMplsEchoDownMapTlvOrNone · read-write · current The value of tmnxOamLspTrCtlDownstreamMapTlv specifies the type of downstream mapping TLV to insert in the MPLS echo request PDU when launching the test. When an LSP trace route test is created, the value of this object defaults to the value of the global configuration object tmnxOamMplsEchoDownstreamMapTlv. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlTestSubMode | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.15 | TmnxOamLspTrTestSubMode | RW | |
column · TmnxOamLspTrTestSubMode · read-write · current The value of tmnxOamLspTrCtlTestSubMode specifies the type of LSP trace route test to perform. When this object is 'unspecified(1)', the type of LSP trace route test to be performed is determined when the test is started, from the set of tmnxOamLspTrCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamLspTrCtlTestSubMode and the type of the LSP to be tested, the test will fail. For example, if tmnxOamLspTrCtlTestSubMode is 'static(2)', and tmnxOamLspTrCtlLspName refers to an LSP with TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to 'mplsTp(7)', the test will fail. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlMplsTpPathType | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.16 | TmnxOamMplsTpPathType | RW | |
column · TmnxOamMplsTpPathType · read-write · current The value of tmnxOamLspTrCtlMplsTpPathType specifies the type of the MPLS-TP path to be tested. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlAssocChannel | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.17 | TmnxOamLspAssocChannel | RW | |
column · TmnxOamLspAssocChannel · read-write · current The value of tmnxOamLspTrCtlAssocChannel specifies the launched echo request's usage of the Associated Channel (ACH) mechanism, when testing an MPLS-TP LSP. When tmnxOamLspTrCtlTestSubMode is 'static(2)', the default value for tmnxOamLspTrCtlAssocChannel is 'nonIp(2)'. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlForce | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.18 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamLspTrCtlForce specifies whether or not to force the transmission of the 'lspTraceRoute' request PDU(s). If tmnxOamLspTrCtlForce is 'true(1)', the test will proceed and request PDU(s) will be sent regardless of the local operational status of the tested LSP path. If tmnxOamLspTrCtlForce is 'false(2)', the test will fail immediately when the local operational status of the tested LSP path is down. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlIgpInstance | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.19 | TmnxIgpInstance | RW | |
column · TmnxIgpInstance · read-write · current The value of tmnxOamLspTrCtlIgpInstance specifies the Interior Gateway Protocol (IGP) instance to be used for the test. The supported object combinations for LSP trace route tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlSrPlcyColor | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.20 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamLspTrCtlSrPlcyColor specifies the Segment Routing (SR) policy color to be used for the test. A color associates an SR policy with an intent (e.g. low latency). tmnxOamLspTrCtlSrPlcyColor, tmnxOamLspTrCtlSrPlcyEndPtAddT, and tmnxOamLspTrCtlSrPlcyEndPtAddr must identify a known SR policy. Otherwise, the test will fail. The color of a static SR policy is defined using TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyColor. When configuring an SR policy LSP trace test, the following objects must all be set in one snmpset PDU: tmnxOamLspTrCtlTestSubMode = 'srPolicy(7)', tmnxOamLspTrCtlSrPlcyColor, tmnxOamLspTrCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)', tmnxOamLspTrCtlSrPlcyEndPtAddr. The supported object combinations for LSP trace tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlSrPlcyEndPtAddT | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.21 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLspTrCtlSrPlcyEndPtAddT specifies the type of IP address stored in tmnxOamLspTrCtlSrPlcyEndPtAddr. The supported object combinations for LSP trace tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlSrPlcyEndPtAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.22 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLspTrCtlSrPlcyEndPtAddr specifies the Segment
Routing (SR) policy endpoint address to be used for the test.
tmnxOamLspTrCtlSrPlcyColor, tmnxOamLspTrCtlSrPlcyEndPtAddT, and
tmnxOamLspTrCtlSrPlcyEndPtAddr must identify a known SR policy.
Otherwise, the test will fail. The endpoint of a static SR policy
is defined using
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddrType
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddr.
When configuring an SR policy LSP trace test, the following objects
must all be set in one snmpset PDU:
tmnxOamLspTrCtlTestSubMode = 'srPolicy(7)',
tmnxOamLspTrCtlSrPlcyColor,
tmnxOamLspTrCtlSrPlcyEndPtAddT = 'ipv4(1)' or 'ipv6(2)',
tmnxOamLspTrCtlSrPlcyEndPtAddr.
The supported object combinations for LSP trace tests are listed in
the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlSrPlcySegList | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.23 | Unsigned32 (0..32) | RW | |
column · Unsigned32 (0..32) · read-write · current The value of tmnxOamLspTrCtlSrPlcySegList specifies the Segment Routing (SR) policy segment list to be used for the test. The supported object combinations for LSP trace tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamLspTrCtlFlexAlgo | 1.3.6.1.4.1.6527.3.1.2.11.2.9.1.24 | Unsigned32 (0 | 128..255) | RW | |
column · Unsigned32 (0 | 128..255) · read-write · current The value of tmnxOamLspTrCtlFlexAlgo specifies the Flexible Algorithm to use for the test. Zero indicates no Flexible Algorithm is specified. The supported object combinations for LSP trace tests are listed in the tmnxOamLspTrCtlTable DESCRIPTION clause. tmnxOamLspTrCtlFlexAlgo must not be changed away from default for an SAA test. | ||||
| TtmnxOamLspTrMapTable | 1.3.6.1.4.1.6527.3.1.2.11.2.10 | NA | ||
table · not-accessible · current tmnxOamLspTrMapTable contains the information obtained from RFC 4379 Downstream Mapping TLVs and/or RFC 6424 Downstream Detailed Mapping TLVs within reply PDUs for active 'lspTraceRoute' tests. tmnxOamLspTrInitMapTable contains related information. | ||||
| RtmnxOamLspTrMapEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1 | NA | ||
row · not-accessible · current tmnxOamLspTrMapEntry contains the information obtained from one RFC 4379 Downstream Mapping TLV (or one RFC 6424 Downstream Detailed Mapping TLV) within one 'lspTraceRoute' reply PDU. The first six indices specify an 'lspTraceRoute' reply PDU. The seventh index specifies one Downstream [Detailed] Mapping TLV within the PDU. Rows are created when a managed 'lspTraceRoute' reply PDU arrives containing one or more Downstream [Detailed] Mapping TLVs. Rows are destroyed when the parent tmnxOamTrProbeHistoryTable row is destroyed. | ||||
| CtmnxOamLspTrMapIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamLspTrMapIndex specifies one RFC 4379 Downstream Mapping TLV (or one RFC 6424 Downstream Detailed Mapping TLV) within the reply PDU specified by the other indices. The agent starts assigning tmnxOamLspTrMapIndex values at 1. | ||||
| CtmnxOamLspTrMapDSIPv4Addr | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.2 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 13.0 R1. | ||||
| CtmnxOamLspTrMapAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.3 | TmnxOamAddressType | RO | |
column · TmnxOamAddressType · read-only · current The value of tmnxOamLspTrMapAddrType indicates the type of addressing used on the replying interface. The value is copied from the Address Type field of the specified RFC 4379 Downstream Mapping TLV (or RFC 6424 Downstream Detailed Mapping TLV), and then mapped from the RFC code point number to the SROS code point number. The supported SROS code points are listed in the following table. Code Point Definition ------------------- ---------- 'ipv4Address (1)' RFC 4379 'ipv4Unnumbered(7)' RFC 4379 'ipv6Address (2)' RFC 4379 'ipv6Unnumbered(8)' RFC 4379 'nonIp (10)' RFC 6426 The supported combinations of tmnxOamLspTrMapAddrType, tmnxOamLspTrMapDsEgrIfNum, tmnxOamLspTrMapDsIngIfNum, tmnxOamLspTrMapDsIpAddressType, and tmnxOamLspTrMapDsIfAddressType are listed in the following table. _AddrType _EgrIfNum _IngIfNum _IpAddressType _IfAddressType ---------------- --------- --------- -------------- -------------- 'ipv4Address' zero zero 'ipv4' 'ipv4' 'ipv4Unnumbered' zero positive 'ipv4' 'unknown' 'ipv6Address' zero zero 'ipv6' 'ipv6' 'ipv6Unnumbered' zero positive 'ipv6' 'unknown' 'nonIp' positive positive 'unknown' 'unknown' In the table above, zero is the null interface number. | ||||
| CtmnxOamLspTrMapDSIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.4 | Unsigned32 | RO | obsolete |
column · Unsigned32 · read-only · obsolete This object was marked obsolete in SROS Release 13.0 R1. | ||||
| CtmnxOamLspTrMapMTU | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.5 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The value of tmnxOamLspTrMapMTU indicates the largest MPLS frame (including the label stack) that fits on the interface to the downstream LSR (Label Switching Router). The value is copied from the MTU (Maximum Transmission Unit) field of the specified RFC 4379 Downstream Mapping TLV (or RFC 6424 Downstream Detailed Mapping TLV).
| ||||
| CtmnxOamLspTrMapDSIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.6 | Unsigned32 (0..255) | RO | obsolete |
column · Unsigned32 (0..255) · read-only · obsolete This object was marked obsolete in SROS Release 5.0. | ||||
| CtmnxOamLspTrMapDsEgrIfNum | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLspTrMapDsEgrIfNum indicates the egress interface number reported by the replying node. This value is copied from the Downstream IP Address field of the specified RFC 4379 Downstream Mapping TLV (or the Downstream Address field of the specified RFC 6424 Downstream Detailed Mapping TLV). See the DESCRIPTION clause of tmnxOamLspTrMapAddrType for more information. | ||||
| CtmnxOamLspTrMapDsIngIfNum | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLspTrMapDsIngIfNum indicates the ingress interface number reported by the replying node. This value is copied from the Downstream Interface Address field of the specified RFC 4379 Downstream Mapping TLV (or RFC 6424 Downstream Detailed Mapping TLV). See the DESCRIPTION clause of tmnxOamLspTrMapAddrType for more information. | ||||
| CtmnxOamLspTrMapDsIpAddressType | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.9 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLspTrMapDsIpAddressType indicates the type of address in tmnxOamLspTrMapDsIpAddress. See the DESCRIPTION clause of tmnxOamLspTrMapAddrType for more information. | ||||
| CtmnxOamLspTrMapDsIpAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.10 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLspTrMapDsIpAddress indicates the Downstream IP Address field in the specified RFC 4379 Downstream Mapping TLV (or the Downstream Address field in the specified RFC 6424 Downstream Detailed Mapping TLV). | ||||
| CtmnxOamLspTrMapDsIfAddressType | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.11 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLspTrMapDsIfAddressType indicates the type of address in tmnxOamLspTrMapDsIfAddress. See the DESCRIPTION clause of tmnxOamLspTrMapAddrType for more information. | ||||
| CtmnxOamLspTrMapDsIfAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.10.1.12 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLspTrMapDsIfAddress indicates the Downstream Interface Address field in the specified RFC 4379 Downstream Mapping TLV (or RFC 6424 Downstream Detailed Mapping TLV). | ||||
| TtmnxOamVprnTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.11 | NA | ||
table · not-accessible · current tmnxOamVprnTrCtlTable contains configuration information for 'vprnTraceRoute' tests. | ||||
| RtmnxOamVprnTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.11.1 | NA | ||
row · not-accessible · current tmnxOamVprnTrCtlEntry contains configuration information for one 'vprnTraceRoute' test. SROS creates a row when tmnxOamTrCtlTestMode is set to 'vprnTraceRoute'. SROS destroys a row when the corresponding tmnxOamTrCtlTable row is destroyed. | ||||
| CtmnxOamVprnTrCtlSourceIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.11.1.1 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamVprnTrCtlSrcAddrType and tmnxOamVprnTrCtlSrcAddress. | ||||
| CtmnxOamVprnTrCtlReplyControl | 1.3.6.1.4.1.6527.3.1.2.11.2.11.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current When the value of tmnxOamVprnTrCtlReplyControl is 'true', the OAM 'vprnTraceRoute' response is returned using the control plane. If its value is 'false', the packet is sent via the data plane. This object is optional and is not relevant when tmnxOamTrCtlTestMode has a value other than 'vprnTraceRoute'. | ||||
| CtmnxOamVprnTrCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.11.1.3 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVprnTrCtlSrcAddrType specifies the type of Internet address stored in tmnxOamVprnTrCtlSrcAddress. | ||||
| CtmnxOamVprnTrCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.11.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVprnTrCtlSrcAddress specifies the Internet address to be used as the source for performing an OAM 'vprnTraceRoute' operation when tmnxOamTrCtlTestMode has a value of 'vprnTraceRoute'. This parameter is required. | ||||
| TtmnxOamVprnTrL3MapTable | 1.3.6.1.4.1.6527.3.1.2.11.2.12 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'vprnTraceRoute' probe operation. An entry in this table is created when the result of an OAM 'vprnTraceRoute' probe is determined. Entries are removed from this table when the corresponding tmnxOamTrProbeHistoryEntry is deleted. | ||||
| RtmnxOamVprnTrL3MapEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamVprnTrL3MapTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVprnTrL3MapEntry belongs to. The third index element identifies an OAM trace route test run. The fourth index element selects a single Nokia SROS OAM 'vprnTraceRoute' operation result. The fifth and sixth indexes select the hop and the probe at that hop for a particular Nokia SROS OAM 'vprnTraceRoute' operation. The seventh index selects either the requestor's or responder's L3 route information. | ||||
| CtmnxOamVprnTrL3MapReporter | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The value of tmnxOamVprnTrL3MapReporter specifies who reported the route information in this row entry. It may have come from the 'vprnTraceRoute' requestor's local information or it may be from the remote 'vprnTraceRoute' responder.
| ||||
| CtmnxOamVprnTrL3MapRouterID | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.2 | RouterID | RO | |
column · RouterID · read-only · current The value of tmnxOamVprnTrL3MapRouterID indicates the router ID of the node, requestor or responder, that provided this route information. | ||||
| CtmnxOamVprnTrL3MapRteDestAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.3 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamVprnTrL3MapDestAddrType and tmnxOamVprnTrL3MapDestAddrType. | ||||
| CtmnxOamVprnTrL3MapRteDestMask | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.4 | Unsigned32 | RO | obsolete |
column · Unsigned32 · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress object tmnxOamVprnTrL3MapDestMaskLen. | ||||
| CtmnxOamVprnTrL3MapRteVprnLabel | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.5 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamVprnTrL3MapRteVprnLabel indicates the VPRN label associated with the route information returned in this 'vprnTraceRoute' reply. | ||||
| CtmnxOamVprnTrL3MapRteMetrics | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVprnTrL3MapRteMetrics indicates the metrics to be used with this 'vprnTraceRoute' route. | ||||
| CtmnxOamVprnTrL3MapRteLastUp | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current The value of tmnxOamVprnTrL3MapRteLastUp indicates the time this route was last added or modified by the protocol. | ||||
| CtmnxOamVprnTrL3MapRteOwner | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamVprnTrL3MapRteOwner indicates the protocol that owns this route. It may be a local or remote route.
| ||||
| CtmnxOamVprnTrL3MapRtePref | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVprnTrL3MapRtePref indicates the route preference value for this route. | ||||
| CtmnxOamVprnTrL3MapRteDist | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.10 | TmnxVPNRouteDistinguisher | RO | |
column · TmnxVPNRouteDistinguisher · read-only · current The value of tmnxOamVprnTrL3MapRteDist is the route distinguisher associated with the route information returned in this 'vprnTraceRoute' reply. | ||||
| CtmnxOamVprnTrL3MapNumNextHops | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVprnTrL3MapNumNextHops indicates the number of entries in the tmnxOamVprnTrNextHopTable for this route. | ||||
| CtmnxOamVprnTrL3MapNumRteTargets | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVprnTrL3MapNumRteTargets indicates the number of entries in the tmnxOamVprnTrRTTable for this route. | ||||
| CtmnxOamVprnTrL3MapDestAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.13 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamVprnTrL3MapDestAddrType indicates the type of internet address stored in tmnxOamVprnTrL3MapDestAddress. | ||||
| CtmnxOamVprnTrL3MapDestAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.14 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamVprnTrL3MapDestAddress indicates the Internet address to be advertised for the route information returned by this 'vprnTraceRoute' reply. When used together with tmnxOamVprnTrL3MapDestMaskLen and tmnxOamVprnTrL3MapRteVprnLabel, a customer route can be identified. | ||||
| CtmnxOamVprnTrL3MapDestMaskLen | 1.3.6.1.4.1.6527.3.1.2.11.2.12.1.15 | InetAddressPrefixLength | RO | |
column · InetAddressPrefixLength · read-only · current The value of tmnxOamVprnTrL3MapDestMaskLen indicates the number of prefix bits (prefix width) to be &-ed with the IP address in tmnxOamVprnTrL3MapDestAddress.
| ||||
| TtmnxOamVprnTrNextHopTable | 1.3.6.1.4.1.6527.3.1.2.11.2.13 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'vprnTraceRoute' probe operation where a L3 route next hop list is returned. An entry in this table is created when the result of an OAM 'vprnTraceRoute' probe is determined. An entry is removed from this table when its corresponding tmnxOamVprnTrL3MapEntry is deleted. | ||||
| RtmnxOamVprnTrNextHopEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamVprnTrNextHopTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVprnTrNextHopEntry belongs to. The third index element identifies an OAM trace route test run. The fourth, fifth and sixth index elements select a single OAM 'vprnTraceRoute' reply. The seventh index selects either the requestor's or responder's route information. The eighth index selects a single L3 next hop entry within a specific 'vprnTraceRoute' probe reply route information. | ||||
| CtmnxOamVprnTrNextHopIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The tmnxOamVprnTrNextHopIndex selects a single L3 next hop entry associated with the router information returned within a specific 'vprnTraceRoute' probe reply. The agent starts assigning tmnxOamVprnTrNextHopIndex values at 1. | ||||
| CtmnxOamVprnTrNextHopRtrID | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.2 | RouterID | RO | obsolete |
column · RouterID · read-only · obsolete This object was marked obsolete in SROS Release 6.0 and replaced with InetAddress objects tmnxOamVprnTrNextHopAddrType and tmnxOamVprnTrNextHopAddress. | ||||
| CtmnxOamVprnTrNextHopType | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamVprnTrNextHopType indicates whether the route owner is a local route or a remote, BGP-VPRN, route.
| ||||
| CtmnxOamVprnTrNextHopTunnelID | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.4 | TmnxTunnelID | RO | |
column · TmnxTunnelID · read-only · current When the value of tmnxOamVprnTrNextHopType is 'remote' the value of tmnxOamVprnTrNextHopTunnelID indicates the tunnel ID used to reach this BGP next hop. | ||||
| CtmnxOamVprnTrNextHopTunnelType | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.5 | TmnxTunnelType | RO | |
column · TmnxTunnelType · read-only · current When the value of tmnxOamVprnTrNextHopType is 'remote' the value of tmnxOamVprnTrNextHopTunnelType indicates the type of tunnel used to reach this BGP next hop. | ||||
| CtmnxOamVprnTrNextHopIfIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.6 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current When the value of tmnxOamVprnTrNextHopType is 'local' the value of tmnxOamVprnTrNextHopIfIndex indicates the interface used to reach this ECMP next hop. | ||||
| CtmnxOamVprnTrNextHopAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.7 | InetAddressType | RO | |
column · InetAddressType · read-only · current tmnxOamVprnTrNextHopAddrType indicates the type of Internet address stored in tmnxOamVprnTrNextHopAddress. Address types 'unknown(0)', 'ipv4(1)', 'ipv6(2)', and 'ipv6z(4)' are supported. | ||||
| CtmnxOamVprnTrNextHopAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.13.1.8 | InetAddress (SIZE (0 | 4 | 16 | 20)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16 | 20)) · read-only · current The value of tmnxOamVprnTrNextHopAddress is the Internet address for this L3 next hop entry. | ||||
| TtmnxOamVprnTrRTTable | 1.3.6.1.4.1.6527.3.1.2.11.2.14 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'vprnTraceRoute' probe operation where a L3 route target list is returned. An entry in this table is created when the result of an OAM 'vprnTraceRoute' probe is determined. An entry is removed from this table when its corresponding tmnxOamVprnTrL3MapEntry is deleted. | ||||
| RtmnxOamVprnTrRTEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.14.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamVprnTrRTTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVprnTrRTEntry belongs to. The third index element identifies an OAM trace route test run. The fourth, fifth and sixth index elements select a single OAM 'vprnTraceRoute' reply. The seventh index selects either the probe requestor's or probe replier's route information. The eighth index selects successive L3 route target entries contained in a specific 'vprnTraceRoute' requestor or probe reply route information. | ||||
| CtmnxOamVprnTrRTIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.14.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The tmnxOamVprnTrRTIndex selects a single L3 route target entry associated with the router information returned within a specific 'vprnTraceRoute' probe reply. The agent starts assigning tmnxOamVprnTrRTIndex values at 1. | ||||
| CtmnxOamVprnTrRouteTarget | 1.3.6.1.4.1.6527.3.1.2.11.2.14.1.2 | TmnxBgpRouteTarget | RO | |
column · TmnxBgpRouteTarget · read-only · current The value of tmnxOamVprnTrRouteTarget is the route target ID for this L3 route target entry. | ||||
| TtmnxOamLspTrDSLabelTable | 1.3.6.1.4.1.6527.3.1.2.11.2.15 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'lspTraceRoute' probe operation when a Downstream Mapping TLV was returned. Each row represents a single downstream label within a returned downstream L2 mapping TLV. An entry in this table is created when the result of an OAM 'lspTraceRoute' probe is determined. An entry is removed from this table when its corresponding tmnxOamLspTrMapEntry is deleted. tmnxOamLspTrInitDSLabelTable contains related information. | ||||
| RtmnxOamLspTrDSLabelEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.15.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamLspTrDSLabelTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamLspTrMapEntry belongs to. The third index element identifies a OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Nokia SROS OAM Trace Route operation. The seventh index selects a single downstream L2 map entry within the specific probe reply. The eighth index selects successive downstream L2 label entries contained in a specific probe reply. | ||||
| CtmnxOamLspTrDSLabelIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.15.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The tmnxOamLspTrDSLabelIndex selects a single downstream L2 label entry within a specific L2 mapping entry reply. The agent starts assigning tmnxOamLspTrDSLabelIndex values at 1. | ||||
| CtmnxOamLspTrDSLabelLabel | 1.3.6.1.4.1.6527.3.1.2.11.2.15.1.2 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamLspTrDSLabelLabel is the label used by the downstream router specified by this downstream L2 label entry. | ||||
| CtmnxOamLspTrDSLabelProtocol | 1.3.6.1.4.1.6527.3.1.2.11.2.15.1.3 | TmnxOamSignalProtocol | RO | |
column · TmnxOamSignalProtocol · read-only · current The value of tmnxOamLspTrDSLabelProtocol is the signaling protocol used by the router for the label specified by this downstream L2 label entry. | ||||
| TtmnxOamMcastTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.16 | NA | ||
table · not-accessible · current tmnxOamMcastTrCtlTable contains configuration and status information specific to 'mcastTraceRoute' tests. | ||||
| RtmnxOamMcastTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1 | NA | ||
row · not-accessible · current The system creates a row in tmnxOamMcastTrCtlTable when a test's type (i.e. tmnxOamTrCtlTestMode) is set to 'mcastTraceRoute'. The system destroys a row in tmnxOamMcastTrCtlTable when the corresponding row in tmnxOamTrCtlTable is destroyed. | ||||
| CtmnxOamMcastTrCtlVRtrID | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.1 | TmnxVRtrID | RW | |
column · TmnxVRtrID · read-write · current The value of tmnxOamMcastTrCtlVRtrID specifies the virtual router to be used for the test. The value specified must be the index of an active row in TIMETRA-VRTR-MIB::vRtrConfTable (i.e. tmnxOamMcastTrCtlVRtrID must match a valid TIMETRA-VRTR-MIB::vRtrID value). The only system-generated TIMETRA-VRTR-MIB::vRtrID value supported by tmnxOamMcastTrCtlVRtrID is 1 (i.e. the Base virtual router). tmnxOamTrCtlVRtrID (i.e. the equivalent object in the parent table) is irrelevant when the test type is 'mcastTraceRoute'. When directing an 'mcastTraceRoute' test to use a virtual router associated with a VPRN service, the virtual router can be specified using tmnxOamMcastTrCtlVRtrID (with the VPRN's virtual router number) or tmnxOamTrCtlServiceId (with the VPRN's service number). tmnxOamTrCtlServiceId is preferred, because service numbers are constant across an SROS reboot (while virtual routers may be renumbered). If non-default values are specified for both tmnxOamMcastTrCtlVRtrID and tmnxOamTrCtlServiceId, tmnxOamTrCtlServiceId is used. | ||||
| CtmnxOamMcastTrCtlSrcIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.2 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete tmnxOamMcastTrCtlSrcIpAddr was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlSrcAddrType and tmnxOamMcastTrCtlSrcAddress. | ||||
| CtmnxOamMcastTrCtlDestIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.3 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete tmnxOamMcastTrCtlDestIpAddr was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlDestAddrType and tmnxOamMcastTrCtlDestAddress. | ||||
| CtmnxOamMcastTrCtlRespIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.4 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete tmnxOamMcastTrCtlRespIpAddr was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlRespAddrType and tmnxOamMcastTrCtlRespAddress. | ||||
| CtmnxOamMcastTrCtlGrpIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.5 | IpAddress | RW | obsolete |
column · IpAddress · read-write · obsolete tmnxOamMcastTrCtlGrpIpAddr was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMcastTrCtlGrpAddrType and tmnxOamMcastTrCtlGrpAddress. | ||||
| CtmnxOamMcastTrCtlHops | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.6 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current The value of tmnxOamMcastTrCtlHops specifies the maximum number of hops that will be traced along the path to the source. This object is optional. | ||||
| CtmnxOamMcastTrQueryId | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrQueryId indicates the 24 bit random number that uniquely identifies the multicast trace query. When the router receives the response back from the first hop router, it maps the response to the query by looking at the query id in the packet. | ||||
| CtmnxOamMcastTrCtlSrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.8 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamMcastTrCtlSrcAddrType specifies the type of IP address stored in tmnxOamMcastTrCtlSrcAddress. | ||||
| CtmnxOamMcastTrCtlSrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.9 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamMcastTrCtlSrcAddress specifies the IP address to be used as the source address for the test. A non-empty address must be specified before the test is enabled. | ||||
| CtmnxOamMcastTrCtlDestAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.10 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamMcastTrCtlDestAddrType specifies the type of IP address stored in tmnxOamMcastTrCtlDestAddress. | ||||
| CtmnxOamMcastTrCtlDestAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.11 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamMcastTrCtlDestAddress specifies the IP address to be used as the destination address for the test. The multicast trace query is sent to this destination address. When the test is administratively enabled (using tmnxOamTrCtlAdminStatus), if tmnxOamMcastTrCtlDestAddrType is 'unknown(0)', SROS assigns a value to tmnxOamMcastTrCtlDestAddrType and tmnxOamMcastTrCtlDestAddress. | ||||
| CtmnxOamMcastTrCtlRespAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.12 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamMcastTrCtlRespAddrType indicates the type of IP address stored in tmnxOamMcastTrCtlRespAddress. | ||||
| CtmnxOamMcastTrCtlRespAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.13 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamMcastTrCtlRespAddress indicates the response address for the test. | ||||
| CtmnxOamMcastTrCtlGrpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.14 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamMcastTrCtlGrpAddrType specifies the type of IP address stored in tmnxOamMcastTrCtlGrpAddress. | ||||
| CtmnxOamMcastTrCtlGrpAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.15 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamMcastTrCtlGrpAddress specifies the IP multicast group address for the test. A non-empty address must be specified before the test is enabled. | ||||
| CtmnxOamMcastTrCtlTestSubMode | 1.3.6.1.4.1.6527.3.1.2.11.2.16.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamMcastTrCtlTestSubMode specifies the type of IP multicast trace route to be performed. 'mcastTraceRouteV1(1)' specifies an Internet Group Management Protocol (IGMP-based) multicast trace route test, using IETF draft-ietf-idmr-traceroute-ipm. 'mcastTraceRouteV2(2)' specifies a UDP-based multicast trace route test, using IETF draft-ietf-mboned-mtrace-v2.
| ||||
| TtmnxOamMcastTrRespTable | 1.3.6.1.4.1.6527.3.1.2.11.2.17 | NA | ||
table · not-accessible · current tmnxOamMcastTrRespTable contains multicast-specific information learned from probe responses for 'mcastTraceRoute' tests. tmnxOamTrProbeHistoryTable contains the remainder of the information learned from probe responses for the tests. | ||||
| RtmnxOamMcastTrRespEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1 | NA | ||
row · not-accessible · current tmnxOamMcastTrRespEntry contains multicast-specific information learned from one probe response of a 'mcastTraceRoute' test. A row is created when a tmnxOamTrProbeHistoryTable row is created for a 'mcastTraceRoute' test. A row is destroyed when the corresponding tmnxOamTrProbeHistoryTable row is destroyed. | ||||
| CtmnxOamMcastTrRespQueryArrivalTime | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrRespQueryArrivalTime indicates the time at which the specified hop received the multicast trace query/request. The timestamp is in 32 bit Network Time Protocol (NTP) format, as described in draft-ietf-idmr-traceroute-ipm. | ||||
| CtmnxOamMcastTrRespInIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.2 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMcastTrRespInIfAddrType and tmnxOamMcastTrRespInIfAddress. | ||||
| CtmnxOamMcastTrRespOutIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.3 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMcastTrRespOutIfAddrType and tmnxOamMcastTrRespOutIfAddress. | ||||
| CtmnxOamMcastTrRespPrevHopRtrAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.4 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete This object was marked obsolete in SROS Release 4.0 and replaced with InetAddress objects tmnxOamMcastTrRespPhRtrAddrType and tmnxOamMcastTrRespPhRtrAddress. | ||||
| CtmnxOamMcastTrRespInPktCount | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamMcastTrRespInPktCount indicates the number of multicast packets received for all groups and sources on the test's incoming interface. 2^32-1 is returned if no count can be reported. This counter has the same value as IF-MIB::ifInMulticastPkts for the test's incoming interface. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV1(1)'. | ||||
| CtmnxOamMcastTrRespOutPktCount | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamMcastTrRespOutPktCount indicates the number of multicast packets that have been transmitted or queued for transmission for all groups and sources on the test's outgoing interface. 2^32-1 is returned if no count can be reported. This counter has the same value as IF-MIB::ifOutMulticastPkts for the test's outgoing interface. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV1(1)'. | ||||
| CtmnxOamMcastTrRespSGPktCount | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamMcastTrRespSGPktCount indicates the number of packets from the test's source forwarded by this router to the test's group. 2^32-1 is returned if no count can be reported. The value of tmnxOamMcastTrRespSrcBit and tmnxOamMcastTrRespSrcMask influence the interpretation of the counter. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV1(1)'. | ||||
| CtmnxOamMcastTrRespRtgProtocol | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamMcastTrRespRtgProtocol indicates the routing protocol in use between this router and the previous-hop router. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV1(1)'.
| ||||
| CtmnxOamMcastTrRespFwdTtl | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrRespFwdTtl indicates the TTL that a packet
is required to have before it will be forwarded over the test's
outgoing interface.
This object is irrelevant when both
1. tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
2. The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
IPv6. | ||||
| CtmnxOamMcastTrRespMBZBit | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrRespMBZBit indicates the Must Be Zero (MBZ) bit of an 'mcastTraceRoute' response probe. Zero is expected. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV1(1)'. | ||||
| CtmnxOamMcastTrRespSrcBit | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrRespSrcBit indicates how to interpret the packet counters tmnxOamMcastTrRespSGPktCount and tmnxOamMcastTrRespSGPktCountHC. If tmnxOamMcastTrRespSrcBit is zero, SROS counts the packets from the test's source address forwarded by this router to the test's group address. Otherwise, SROS counts the packets from the test's source prefix forwarded by this router to the test's group address. The source prefix is the source address, masked using tmnxOamMcastTrRespSrcMask. | ||||
| CtmnxOamMcastTrRespSrcMask | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrRespSrcMask indicates the prefix length used with the test's source address (i.e. tmnxOamMcastTrCtlSrcAddrType and tmnxOamMcastTrCtlSrcAddress) when computing tmnxOamMcastTrRespSGPktCount or tmnxOamMcastTrRespSGPktCountHC. If the router is forwarding solely on group state, then this value is larger than the maximum prefix length for the test's address family (i.e. 32 for IPv4; 128 for IPv6). This value is irrelevant if tmnxOamMcastTrRespSrcBit is zero. | ||||
| CtmnxOamMcastTrRespFwdCode | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamMcastTrRespFwdCode indicates a forwarding
information/error code:
noError (0) - No error
wrongIf (1) - Traceroute request arrived on an interface to
which this router would not forward for this
source,group,destination.
pruneSent (2) - This router has sent a prune upstream which
applies to the source and group in the traceroute
request.
pruneRecvd (3) - This router has stopped forwarding for this
source and group in response to a request from
the next hop router.
scoped (4) - The group is subject to administrative scoping
at this hop.
noRoute (5) - This router has no route for the source or
group and no way to determine a potential route.
wrongLastHop (6) - This router is not the proper last-hop router.
notForwarding(7) - This router is not forwarding this
source,group out the outgoing interface for an
unspecified reason.
reachedRP (8) - Reached Rendezvous Point or Core.
rpfIf (9) - Traceroute request arrived on the expected RPF
interface for this source,group.
noMulticast (10) - Traceroute request arrived on an interface
which is not enabled for multicast.
infoHidden (11) - One or more hops have been hidden from this trace.
reachedGW (12) - Mtrace2 Request arrived on a gateway (e.g. a NAT or
firewall) that hides the information between this
router and the Mtrace2 client.
unknownQuery(13) - A non-transitive Extended Query Type was received by
a router which does not support the type.
fatalError (128) - Router may know the previous hop but cannot forward
the message to it.
noSpace (129) - There was not enough room to insert another
response data block in the packet.
oldRouter (130) - The previous hop router does not understand
traceroute requests.
adminProhib(131) - Traceroute is administratively prohibited.
unknown (132) - Unknown forwarding code received.
| ||||
| CtmnxOamMcastTrRespInIfAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.14 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamMcastTrRespInIfAddrType indicates the type of IP address stored in tmnxOamMcastTrRespInIfAddress. | ||||
| CtmnxOamMcastTrRespInIfAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.15 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamMcastTrRespInIfAddress indicates the IP address of
the interface on which packets from the test's source and group are
expected to arrive.
In the case of an mtrace test, the value is copied from the Incoming
Interface Address field of the Response Data segment.
In the case of an Mtrace2 IPv4 test, the value is copied from the
Incoming Interface Address field of the IPv4 Mtrace2 Standard Response
Block.
The IPv4 address 0.0.0.0 is returned if the address is unknown.
This object is irrelevant when both
1. tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
2. The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
IPv6. | ||||
| CtmnxOamMcastTrRespOutIfAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.16 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamMcastTrRespOutIfAddrType indicates the type of IP address stored in tmnxOamMcastTrRespOutIfAddress. | ||||
| CtmnxOamMcastTrRespOutIfAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.17 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamMcastTrRespOutIfAddress indicates the IP address
of the interface on which packets from the test's source and group
flow to the specified destination.
In the case of an mtrace test, the value is copied from the Outgoing
Interface Address field of the Response Data segment.
In the case of an Mtrace2 IPv4 test, the value is copied from the
Outgoing Interface Address field of the IPv4 Mtrace2 Standard Response
Block.
The IPv4 address 0.0.0.0 is returned if the address is unknown.
This object is irrelevant when both
1. tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
2. The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
IPv6. | ||||
| CtmnxOamMcastTrRespPhRtrAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.18 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamMcastTrRespPhRtrAddrType indicates the type of IP address stored in tmnxOamMcastTrRespPhRtrAddress. | ||||
| CtmnxOamMcastTrRespPhRtrAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.19 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamMcastTrRespPhRtrAddress indicates the IP address of the router from which this router expects packets for this source. This may be a multicast group (e.g. ALL-[protocol]-ROUTERS.MCAST.NET) if the previous hop is not known because of the workings of the multicast routing protocol. In the case of an mtrace test, the value is copied from the Previous-Hop Router Address field of the Response Data segment. In the case of an Mtrace2 IPv4 test, the value is copied from the Upstream Router Address field of the IPv4 Mtrace2 Standard Response Block. In the case of an Mtrace2 IPv6 test, the value is copied from the Remote Address field of the IPv6 Mtrace2 Standard Response Block. If the address is unknown, an all-zeros IPv4 or IPv6 address is returned. | ||||
| CtmnxOamMcastTrRespInPktCountHC | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamMcastTrRespInPktCountHC indicates the number of multicast packets received for all groups and sources on the test's incoming interface. 2^64-1 is returned if no count can be reported. This counter has the same value as IF-MIB::ifHCInMulticastPkts for the test's incoming interface. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'. | ||||
| CtmnxOamMcastTrRespOutPktCountHC | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamMcastTrRespOutPktCountHC indicates the number of multicast packets that have been transmitted or queued for transmission for all groups and sources on the test's outgoing interface. 2^64-1 is returned if no count can be reported. This counter has the same value as IF-MIB::ifHCOutMulticastPkts for the test's outgoing interface. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'. | ||||
| CtmnxOamMcastTrRespSGPktCountHC | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tmnxOamMcastTrRespSGPktCountHC indicates the number of packets from the test's source forwarded by this router to the test's group. 2^64-1 is returned if no count can be reported. The value of tmnxOamMcastTrRespSrcBit and tmnxOamMcastTrRespSrcMask influence the interpretation of the counter. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'. | ||||
| CtmnxOamMcastTrRespRtgProtocol2 | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamMcastTrRespRtgProtocol2 indicates the unicast routing protocol running between this router and the upstream router. The code points are the IANA-RTPROTO-MIB::IANAipRouteProtocol code points, with 'unknown(0)' added. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
| ||||
| CtmnxOamMcastTrRespMcastRtgProto | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamMcastTrRespMcastRtgProto indicates the multicast routing protocol in use between this router and the upstream router. The code points are the IANA-RTPROTO-MIB::IANAipMRouteProtocol code points, with 'unknown(0)' added. This object is relevant when tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
| ||||
| CtmnxOamMcastTrRespInIfIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.25 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrRespInIfIndex indicates the value in the
Incoming Interface ID field of the IPv6 Mtrace2 Standard Response
Block.
In the case of an IPv6 Mtrace2 Standard Response Block provided by a
router running SROS, the value returned is a global interface
identifier (i.e. a TIMETRA-VRTR-MIB::vRtrIfGlobalIndex value).
This object is relevant when both
1. tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
2. The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
IPv6. | ||||
| CtmnxOamMcastTrRespOutIfIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.26 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamMcastTrRespOutIfIndex indicates the value in the
Outgoing Interface ID field of the IPv6 Mtrace2 Standard Response
Block.
In the case of an IPv6 Mtrace2 Standard Response Block provided by a
router running SROS, the value returned is a global interface
identifier (i.e. a TIMETRA-VRTR-MIB::vRtrIfGlobalIndex value).
This object is relevant when both
1. tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
2. The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
IPv6. | ||||
| CtmnxOamMcastTrRespLocalAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.27 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamMcastTrRespLocalAddrType indicates the type of IP address stored in tmnxOamMcastTrRespLocalAddress. | ||||
| CtmnxOamMcastTrRespLocalAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.17.1.28 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamMcastTrRespLocalAddress indicates the IP address
of the router that provided this 'mcastTraceRoute(4)' response.
The value is copied from the Local Address field of the IPv6 Mtrace2
Standard Response Block.
This object is relevant when both
1. tmnxOamMcastTrCtlTestSubMode is 'mcastTraceRouteV2(2)'.
2. The test's IP address family (i.e. tmnxOamMcastTrCtlGrpAddrType) is
IPv6. | ||||
| TtmnxOamLTtraceCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.18 | NA | ||
table · not-accessible · current Each row in tmnxOamLTtraceCtlTable contains the LDP-tree-trace-specific configuration information needed to launch a foreground LDP (Label Distribution Protocol) tree trace test. The rest of the configuration information needed to launch the test resides in the corresponding row of tmnxOamTrCtlTable. | ||||
| RtmnxOamLTtraceCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.18.1 | NA | ||
row · not-accessible · current The system creates a row in tmnxOamLTtraceCtlTable when tmnxOamTrCtlTestMode is set to 'ldpTreeTrace'. The system destroys a row in tmnxOamLTtraceCtlTable when the corresponding row in tmnxOamTrCtlTable is destroyed. | ||||
| CtmnxOamLTtraceCtlLdpPrefixType | 1.3.6.1.4.1.6527.3.1.2.11.2.18.1.2 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamLTtraceCtlLdpPrefixType specifies the type of Internet address stored in tmnxOamLTtraceCtlLdpPrefix. | ||||
| CtmnxOamLTtraceCtlLdpPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.18.1.3 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamLTtraceCtlLdpPrefix specifies the Internet address prefix for the LDP based LSP for this LDP tree trace test. | ||||
| CtmnxOamLTtraceCtlLdpPrefixLen | 1.3.6.1.4.1.6527.3.1.2.11.2.18.1.4 | InetAddressPrefixLength | RW | |
column · InetAddressPrefixLength · read-write · current The value of tmnxOamLTtraceCtlLdpPrefixLen specifies the Internet address prefix length for the LDP based LSP for this LDP tree trace test. The value of this parameter is valid only when the LDP prefix (tmnxOamLTtraceCtlLdpPrefix) has been specified.
| ||||
| CtmnxOamLTtraceCtlMaxPath | 1.3.6.1.4.1.6527.3.1.2.11.2.18.1.5 | Unsigned32 (1..255) | RW | |
column · Unsigned32 (1..255) · read-write · current The value of tmnxOamLTtraceCtlMaxPath specifies the maximum number of paths that can be discovered for the given LDP Prefix (tmnxOamLTtraceCtlLdpPrefix). | ||||
| CtmnxOamLTtraceCtlDownstreamMpTlv | 1.3.6.1.4.1.6527.3.1.2.11.2.18.1.6 | TmnxOamMplsEchoDownMapTlv | RW | |
column · TmnxOamMplsEchoDownMapTlv · read-write · current The value of tmnxOamLTtraceCtlDownstreamMpTlv specifies the type of downstream mapping TLV to insert in the MPLS echo request PDUs when launching the test. When an LDP tree trace test is created, the value of this object defaults to the value of the global configuration object tmnxOamMplsEchoDownstreamMapTlv. | ||||
| StmnxOamLTtraceMaxConRequests | 1.3.6.1.4.1.6527.3.1.2.11.2.19 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The value of tmnxOamLTtraceMaxConRequests indicates the maximum number of concurrent LDP Tree Trace manual discovery sessions that are allowed within an agent implementation.
| ||||
| TtmnxOamLTtraceResultsTable | 1.3.6.1.4.1.6527.3.1.2.11.2.20 | NA | ||
table · not-accessible · current tmnxOamLTtraceResultsTable contains the run-level test results for 'ldpTreeTrace' tests. | ||||
| RtmnxOamLTtraceResultsEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.20.1 | NA | ||
row · not-accessible · current tmnxOamLTtraceResultsEntry contains the run-level test results for one 'ldpTreeTrace' test run. A row is created when an 'ldpTreeTrace' test is enabled (using tmnxOamTrCtlAdminStatus). A row is destroyed when: 1. The corresponding test configuration is destroyed (using tmnxOamTrCtlRowStatus), or 2. Results are cleared for the test (using TIMETRA-CLEAR-MIB::tmnxClearAction), or 3. A new run result is available, and the limit on the number of run results retained per test (3, currently) has been reached. In that case, the oldest run result row is destroyed. | ||||
| CtmnxOamLTtraceResultsDisPaths | 1.3.6.1.4.1.6527.3.1.2.11.2.20.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceResultsDisPaths indicates the number of discovered ECMP paths in this OAM LDP Tree discovery test. | ||||
| CtmnxOamLTtraceResultsFailedHops | 1.3.6.1.4.1.6527.3.1.2.11.2.20.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceResultsFailedHops indicates the number of hops from which no successful response was received during this OAM LDP Tree discovery test. | ||||
| CtmnxOamLTtraceResultsDisState | 1.3.6.1.4.1.6527.3.1.2.11.2.20.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLTtraceResultsDisState indicates the current state of the discovery process for the LDP IP prefix (tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test.
| ||||
| CtmnxOamLTtraceResultsDisStatus | 1.3.6.1.4.1.6527.3.1.2.11.2.20.1.5 | TmnxOamLTtraceDisStatusBits | RO | |
column · TmnxOamLTtraceDisStatusBits · read-only · current The value of tmnxOamLTtraceResultsDisStatus indicates the current discovery status bits for the LDP IP prefix (tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test. | ||||
| TtmnxOamLTtraceHopInfoTable | 1.3.6.1.4.1.6527.3.1.2.11.2.21 | NA | ||
table · not-accessible · current tmnxOamLTtraceHopInfoTable contains the TTL-level test results for 'ldpTreeTrace' tests. | ||||
| RtmnxOamLTtraceHopInfoEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1 | NA | ||
row · not-accessible · current tmnxOamLTtraceHopInfoEntry contains the TTL-level test results for one TTL of one 'ldpTreeTrace' test. A row is created when a TTL is probed by an 'ldpTreeTrace' test run. Rows are destroyed when the corresponding tmnxOamLTtraceResultsTable row is destroyed. | ||||
| CtmnxOamLTtraceHopIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The value of tmnxOamLTtraceHopIndex indicates the hop index for an Nokia SROS OAM Trace hop for an LDP Tree Trace test. The hop index values are assigned starting at 1. | ||||
| CtmnxOamLTtraceUpStreamHopIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceUpStreamHopIndex indicates the hop index (tmnxOamLTtraceHopIndex) of its upstream hop discovered during the LDP Tree Trace test. The value of tmnxOamLTtraceUpStreamHopIndex is 0 for the hops which are the root of the different discovered paths for the LDP Tree Trace test. | ||||
| CtmnxOamLTtraceHopAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLTtraceHopAddrType indicates the type of Internet address stored in tmnxOamLTtraceHopAddr. | ||||
| CtmnxOamLTtraceHopAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLTtraceHopAddr indicates the IP address of a hop for a given LDP based LSP associated with the OAM LDP Tree trace test. | ||||
| CtmnxOamLTtraceHopDstAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLTtraceHopDstAddrType indicates the type of Internet address stored in tmnxOamLTtraceHopDstAddr. | ||||
| CtmnxOamLTtraceHopDstAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLTtraceHopDstAddr indicates the destination IP address (127 Address) of a path associated with the hop. | ||||
| CtmnxOamLTtraceHopEgrNhAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.7 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLTtraceHopEgrNhAddrType indicates the type of Internet address stored in tmnxOamLTtraceHopEgrNhAddr. | ||||
| CtmnxOamLTtraceHopEgrNhAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.8 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLTtraceHopEgrNhAddr indicates the next hop IP address (wrt the ingress router), which is used to reach this Hop (tmnxOamLTtraceHopAddr). | ||||
| CtmnxOamLTtraceHopDisTtl | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceHopDisTtl indicates the label time-to-live value used to discover this hop. | ||||
| CtmnxOamLTtraceHopLastRc | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.10 | TmnxOamPingRtnCode | RO | |
column · TmnxOamPingRtnCode · read-only · current The value of tmnxOamLTtraceHopLastRc indicates the OAM return code received in the OAM trace response. | ||||
| CtmnxOamLTtraceHopDiscoveryState | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLTtraceHopDiscoveryState indicates the current discovery state of this hop.
| ||||
| CtmnxOamLTtraceHopDiscoveryTime | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.12 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLTtraceHopDiscoveryTime indicates the sysUpTime when the hop was discovered. | ||||
| CtmnxOamLTtraceHopLabel1 | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.13 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamLTtraceHopLabel1 indicates the first (top of the label stack) label for this hop. | ||||
| CtmnxOamLTtraceHopLabel2 | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.14 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamLTtraceHopLabel2 indicates the second label for this hop. | ||||
| CtmnxOamLTtraceHopLabel3 | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.15 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamLTtraceHopLabel3 indicates the third label for this hop. | ||||
| CtmnxOamLTtraceHopLabel4 | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.16 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamLTtraceHopLabel4 indicates the fourth label for this hop. | ||||
| CtmnxOamLTtraceHopLabel5 | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.17 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamLTtraceHopLabel5 indicates the fifth label for this hop. | ||||
| CtmnxOamLTtraceHopLabel6 | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.18 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamLTtraceHopLabel6 indicates the sixth label for this hop. | ||||
| CtmnxOamLTtraceHopIfAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.19 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLTtraceHopIfAddrType indicates the IP address type for the interface IP address for this hop. | ||||
| CtmnxOamLTtraceHopIfAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.20 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLTtraceHopIfAddress indicates the IP Address for the interface for this hop. | ||||
| CtmnxOamLTtraceHopRouterIdType | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.21 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLTtraceHopRouterIdType indicates the IP address type for the Router ID for this hop. | ||||
| CtmnxOamLTtraceHopRouterId | 1.3.6.1.4.1.6527.3.1.2.11.2.21.1.22 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLTtraceHopRouterId indicates the IP Address for the Router ID for this hop. | ||||
| TtmnxOamLTtraceAutoConfigTable | 1.3.6.1.4.1.6527.3.1.2.11.2.22 | NA | ||
table · not-accessible · current tmnxOamLTtraceAutoConfigTable contains configuration information for
background LDP Tree Trace for the Base virtual router.
Results are available in
tmnxOamLTtraceAutoStatusTable,
tmnxOamLTtraceFecInfoTable,
tmnxOamLTtracePathInfoTable. | ||||
| RtmnxOamLTtraceAutoConfigEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1 | NA | ||
row · not-accessible · current tmnxOamLTtraceAutoConfigEntry contains configuration information for
background LDP Tree Trace for the Base virtual router.
A row can be created or destroyed using tmnxOamLTtraceAutoRowStatus.
Destroying a row destroys the corresponding rows in
tmnxOamLTtraceAutoStatusTable,
tmnxOamLTtraceFecInfoTable,
tmnxOamLTtracePathInfoTable.
| ||||
| CtmnxOamLTtraceAutoRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamLTtraceAutoRowStatus specifies the row status of the background LDP Tree Trace instance. When creating a row, the INDEX value vRtrID=1 (i.e. the Base virtual router) must be specified. An attempt to destroy a row will fail if tmnxOamLTtraceAutoAdminState is 'inService(2)'. | ||||
| CtmnxOamLTtraceAutoLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLTtraceAutoLastChanged indicates the last time the value of a writable object in this row was modified. | ||||
| CtmnxOamLTtraceAutoStorageType | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.3 | StorageType | RC | obsolete |
column · StorageType · read-create · obsolete This object was marked obsolete in SROS Release 14.0 R1. There is no replacement object. | ||||
| CtmnxOamLTtraceAutoAdminState | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.4 | TmnxAdminState | RC | |
column · TmnxAdminState · read-create · current The value of tmnxOamLTtraceAutoAdminState specifies the administrative state of the background LDP Tree Discovery process. When tmnxOamLTtraceAutoAdminState becomes 'inService(2)', the background LDP Tree Discovery process starts, and periodic path-probing on the previously discovered paths, if any, continues. When tmnxOamLTtraceAutoAdminState becomes 'outOfService(3)', the background LDP Tree Discovery process and periodic path-probing on the discovered paths stops. At the start of the discovery process, it selects the address FECs imported from LDP peers (TIMETRA-LDP-MIB::vRtrLdpAddrFecTable) provided the FECs pass the configured policies (tmnxOamLTtraceAutoPolicy1..tmnxOamLTtraceAutoPolicy5). For all the FECs (tmnxOamLTtraceAutoTotalFecs), it automatically creates rows in the tmnxOamLTtraceFecInfoTable. As a part of the background discovery process, it creates rows in the tmnxOamLTtracePathInfoTable for each discovered path. | ||||
| CtmnxOamLTtraceAutoFcName | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.5 | TFCName | RC | |
column · TFCName · read-create · current The value of tmnxOamLTtraceAutoFcName specifies the forwarding class of the MPLS Echo request packets. The forwarding class name must match the INDEX of a row of TIMETRA-QOS-MIB::tFCNameTable. | ||||
| CtmnxOamLTtraceAutoProfile | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.6 | TProfile | RC | |
column · TProfile · read-create · current The value of tmnxOamLTtraceAutoProfile specifies the QoS profile to be used with the forwarding class specified in tmnxOamLTtraceAutoFcName. | ||||
| CtmnxOamLTtraceAutoDiscIntvl | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.7 | Unsigned32 (60..1440) | RC | |
column · Unsigned32 (60..1440) · read-create · current The value of tmnxOamLTtraceAutoDiscIntvl specifies the number of minutes to wait before repeating the background LDP Tree Discovery process.
| ||||
| CtmnxOamLTtraceAutoMaxPath | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.8 | Unsigned32 (1..128) | RC | |
column · Unsigned32 (1..128) · read-create · current The value of tmnxOamLTtraceAutoMaxPath specifies the maximum number of paths that can be discovered for a selected IP Address FEC (tmnxOamLTtraceAutoTotalFecs). | ||||
| CtmnxOamLTtraceAutoTrMaxTtl | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.9 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The value of tmnxOamLTtraceAutoTrMaxTtl specifies the maximum label time-to-live value for an MPLS trace request during the tree discovery.
| ||||
| CtmnxOamLTtraceAutoTrTimeOut | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.10 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current The value of tmnxOamLTtraceAutoTrTimeOut specifies the timeout value, in seconds, for an MPLS trace request during the tree discovery.
| ||||
| CtmnxOamLTtraceAutoTrMaxFailures | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.11 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamLTtraceAutoTrMaxFailures specifies the maximum number of consecutive timeouts allowed before terminating transmission of MPLS trace requests to a hop.
| ||||
| CtmnxOamLTtraceAutoPolicy1 | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.12 | TPolicyStatementNameOrEmpty | RC | |
column · TPolicyStatementNameOrEmpty · read-create · current The value of tmnxOamLTtraceAutoPolicy1 specifies the first policy used to filter LDP imported Address FECs. The name should match the INDEX of a TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row. Otherwise, it is ignored. | ||||
| CtmnxOamLTtraceAutoPolicy2 | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.13 | TPolicyStatementNameOrEmpty | RC | |
column · TPolicyStatementNameOrEmpty · read-create · current The value of tmnxOamLTtraceAutoPolicy2 specifies the second policy used to filter LDP imported Address FECs. The name should match the INDEX of a TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row. Otherwise, it is ignored. | ||||
| CtmnxOamLTtraceAutoPolicy3 | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.14 | TPolicyStatementNameOrEmpty | RC | |
column · TPolicyStatementNameOrEmpty · read-create · current The value of tmnxOamLTtraceAutoPolicy3 specifies the third policy used to filter LDP imported Address FECs. The name should match the INDEX of a TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row. Otherwise, it is ignored. | ||||
| CtmnxOamLTtraceAutoPolicy4 | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.15 | TPolicyStatementNameOrEmpty | RC | |
column · TPolicyStatementNameOrEmpty · read-create · current The value of tmnxOamLTtraceAutoPolicy4 specifies the fourth policy used to filter LDP imported Address FECs. The name should match the INDEX of a TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row. Otherwise, it is ignored. | ||||
| CtmnxOamLTtraceAutoPolicy5 | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.16 | TPolicyStatementNameOrEmpty | RC | |
column · TPolicyStatementNameOrEmpty · read-create · current The value of tmnxOamLTtraceAutoPolicy5 specifies the fifth policy used to filter LDP imported Address FECs. The name should match the INDEX of a TIMETRA-ROUTE-POLICY-MIB::tRPOperPolicyStatementTable row. Otherwise, it is ignored. | ||||
| CtmnxOamLTtraceAutoProbeIntvl | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.17 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current The value of tmnxOamLTtraceAutoProbeIntvl specifies the number of minutes to wait before repeating probing (pinging) a discovered path.
| ||||
| CtmnxOamLTtraceAutoPrTimeOut | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.18 | Unsigned32 (1..3) | RC | |
column · Unsigned32 (1..3) · read-create · current The value of tmnxOamLTtraceAutoPrTimeOut specifies the timeout value, in minutes, for a ping request during probing. tmnxOamLTtraceAutoPrTimeOut cannot be greater than tmnxOamLTtraceAutoProbeIntvl.
| ||||
| CtmnxOamLTtraceAutoPrMaxFailures | 1.3.6.1.4.1.6527.3.1.2.11.2.22.1.19 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamLTtraceAutoPrMaxFailures specifies the maximum number of consecutive timeouts allowed before failing a path probe (ping).
| ||||
| TtmnxOamLTtraceAutoStatusTable | 1.3.6.1.4.1.6527.3.1.2.11.2.23 | NA | ||
table · not-accessible · current tmnxOamLTtraceAutoStatusTable contains status information for background LDP Tree Trace for the Base virtual router. Background LDP tree trace is configured using tmnxOamLTtraceAutoConfigTable. | ||||
| RtmnxOamLTtraceAutoStatusEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.23.1 | NA | ||
row · not-accessible · current tmnxOamLTtraceAutoStatusEntry contains status information for background LDP Tree Trace for the Base virtual router. A row is created/destroyed when a row is created/destroyed in tmnxOamLTtraceAutoConfigTable.
| ||||
| CtmnxOamLTtraceAutoDiscoveryState | 1.3.6.1.4.1.6527.3.1.2.11.2.23.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLTtraceAutoDiscoveryState indicates the current state of the discovery process.
| ||||
| CtmnxOamLTtraceAutoTotalFecs | 1.3.6.1.4.1.6527.3.1.2.11.2.23.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceAutoTotalFecs indicates the number of Address FECs that have been selected for discovery during the current discovery process. An Address FEC imported from an LDP peer (TIMETRA-LDP-MIB::vRtrLdpAddrFecTable) is selected if it passes the associated policies (tmnxOamLTtraceAutoPolicy1.. tmnxOamLTtraceAutoPolicy5). | ||||
| CtmnxOamLTtraceAutoDisFecs | 1.3.6.1.4.1.6527.3.1.2.11.2.23.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceAutoDisFecs indicates the number of selected Address FECs that have been discovered successfully during the current discovery process. | ||||
| CtmnxOamLTtraceAutoLastDisStart | 1.3.6.1.4.1.6527.3.1.2.11.2.23.1.4 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLTtraceAutoLastDisStart indicates the sysUpTime when the last background discovery process started. If no discovery process has started, the value is zero. | ||||
| CtmnxOamLTtraceAutoLastDisEnd | 1.3.6.1.4.1.6527.3.1.2.11.2.23.1.5 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLTtraceAutoLastDisEnd indicates the sysUpTime when the last background discovery process ended. Before the first discovery process ends, it is zero. This value is set at the end of a discovery process. This value is not reset during starting/restarting. | ||||
| CtmnxOamLTtraceAutoLastDisDur | 1.3.6.1.4.1.6527.3.1.2.11.2.23.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceAutoLastDisDur indicates the time (in seconds) it took to finish the last discovery process. If no test has been finished, the value is 0. This value is updated only when a discovery ends.
| ||||
| TtmnxOamLTtraceFecInfoTable | 1.3.6.1.4.1.6527.3.1.2.11.2.24 | NA | ||
table · not-accessible · current tmnxOamLTtraceFecInfoTable contains per-FEC (i.e. per-prefix) information discovered by background LDP tree trace. Background LDP tree trace is configured using tmnxOamLTtraceAutoConfigTable. | ||||
| RtmnxOamLTtraceFecInfoEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1 | NA | ||
row · not-accessible · current tmnxOamLTtraceFecInfoEntry contains information about one FEC discovered by background LDP tree trace. Rows are created and destroyed by SROS. | ||||
| CtmnxOamLTtraceFecPrefixType | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of tmnxOamLTtraceFecPrefixType specifies the type of remote IP address stored in tmnxOamLTtraceFecPrefix. Currently only 'ipv4(1)' is supported. | ||||
| CtmnxOamLTtraceFecPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.2 | InetAddress (SIZE (0 | 4 | 16)) | NA | |
column · InetAddress (SIZE (0 | 4 | 16)) · not-accessible · current The value of tmnxOamLTtraceFecPrefix specifies the Internet address prefix for an LDP based LSP associated with the OAM LDP Tree trace test. | ||||
| CtmnxOamLTtraceFecPrefLen | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.3 | InetAddressPrefixLength | NA | |
column · InetAddressPrefixLength · not-accessible · current The value of tmnxOamLTtraceFecPrefLen specifies the Internet address prefix length for the LDP based LSP associated with the OAM LDP Tree trace test.
| ||||
| CtmnxOamLTtraceFecDiscoveryState | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLTtraceFecDiscoveryState indicates the current state of the discovery process for the Address FEC.
| ||||
| CtmnxOamLTtraceFecDisStatusBits | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.5 | TmnxOamLTtraceDisStatusBits | RO | |
column · TmnxOamLTtraceDisStatusBits · read-only · current The value of tmnxOamLTtraceFecDisStatusBits indicates the current discovery status bits for the Address FEC. | ||||
| CtmnxOamLTtraceFecDisPaths | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceFecDisPaths indicates the number of discovered ECMP paths for the Address FEC. | ||||
| CtmnxOamLTtraceFecFailedHops | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceFecFailedHops indicates the number of hops from which no successful response was received. | ||||
| CtmnxOamLTtraceFecLastDisEnd | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.8 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLTtraceFecLastDisEnd indicates the sysUpTime when the FEC was last discovered. | ||||
| CtmnxOamLTtraceFecFailedProbes | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceFecFailedProbes indicates the number of discovered paths which are in failed probing state. | ||||
| CtmnxOamLTtraceFecProbeState | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLTtraceFecProbeState indicates the current overall probing state for the discovered paths of the Address FEC. The tmnxOamLTtraceFecProbeState is considered as 'oK' when probing on all the associated discovered paths is OK. It is considered as 'failed' when probing on all the associated discovered paths failed. It is considered as partially failed when probing on one or more, but not all, discovered paths failed.
| ||||
| CtmnxOamLTtraceFecSendErrProbes | 1.3.6.1.4.1.6527.3.1.2.11.2.24.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtraceFecSendErrProbes indicates the number of discovered paths which are experiencing problems in sending probe (ping) requests. | ||||
| TtmnxOamLTtracePathInfoTable | 1.3.6.1.4.1.6527.3.1.2.11.2.25 | NA | ||
table · not-accessible · current tmnxOamLTtracePathInfoTable contains per-path information discovered by background LDP tree trace. Background LDP tree trace is configured using tmnxOamLTtraceAutoConfigTable. | ||||
| RtmnxOamLTtracePathInfoEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1 | NA | ||
row · not-accessible · current tmnxOamLTtracePathInfoEntry contains information about one path discovered by background LDP tree trace. Rows are created and destroyed by SROS. | ||||
| CtmnxOamLTtracePathDstAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of tmnxOamLTtracePathDstAddrType specifies the type of Internet address stored in tmnxOamLTtracePathDstAddr. | ||||
| CtmnxOamLTtracePathDstAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.2 | InetAddress (SIZE (0 | 4 | 16)) | NA | |
column · InetAddress (SIZE (0 | 4 | 16)) · not-accessible · current The value of tmnxOamLTtracePathDstAddr specifies the destination IP address (127 Address) of a path for a given LDP based LSP associated with the OAM LDP Tree trace test. | ||||
| CtmnxOamLTtracePathRemAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLTtracePathRemAddrType indicates the type of Internet address stored in tmnxOamLTtracePathRemoteAddr. | ||||
| CtmnxOamLTtracePathRemoteAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLTtracePathRemoteAddr indicates the associated interface IP address or the router ID of the egress router. | ||||
| CtmnxOamLTtracePathEgrNhAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLTtracePathEgrNhAddrType indicates the type of Internet address stored in tmnxOamLTtracePathEgrNhAddr. | ||||
| CtmnxOamLTtracePathEgrNhAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLTtracePathEgrNhAddr indicates the next hop IP address (wrt the ingress router) used to reach the associated ECMP path endpoint. | ||||
| CtmnxOamLTtracePathDisTtl | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtracePathDisTtl indicates the label time-to-live value used to discover the egress router for the path. | ||||
| CtmnxOamLTtracePathLastDisTime | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.8 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLTtracePathLastDisTime indicates the sysUpTime when the path was last discovered. | ||||
| CtmnxOamLTtracePathLastRc | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.9 | TmnxOamPingRtnCode | RO | |
column · TmnxOamPingRtnCode · read-only · current The value of tmnxOamLTtracePathLastRc indicates the OAM return code received in the OAM ping response. | ||||
| CtmnxOamLTtracePathProbeState | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLTtracePathProbeState indicates the current probing (ping) state for the discovered ECMP path. tmnxOamLTtracePathProbeState is 'failed' when the number of consecutive timeouts for the ping request reached its maximum allowed limit (tmnxOamLTtraceAutoPrMaxFailures). tmnxOamLTtracePathProbeState is 'oK' after receiving a successful ping response for the associated path.
| ||||
| CtmnxOamLTtracePathProbeTmOutCnt | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLTtracePathProbeTmOutCnt indicates the number of consecutive timeouts for the associated ping request. tmnxOamLTtracePathProbeTmOutCnt is reset to zero after receiving a successful ping response from the path destination. | ||||
| CtmnxOamLTtracePathProbeSendErr | 1.3.6.1.4.1.6527.3.1.2.11.2.25.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLTtracePathProbeSendErr indicates the state of the last path probe (ping) request. tmnxOamLTtracePathProbeSendErr is 'failed' if the last probe (ping) request could not be sent due to a local failure.
| ||||
| TtmnxOamVccvTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.26 | NA | ||
table · not-accessible · current Each row in tmnxOamVccvTrCtlTable contains the VCCV-specific
configuration information needed to launch a VCCV (Virtual Circuit
Connectivity Verification) trace route test. The rest of the
configuration information needed to launch the test resides in the
corresponding row of tmnxOamTrCtlTable.
Four types of VCCV trace route tests are supported: AII Type 2,
FEC-128 Pseudowire, Spoke SDP FEC, and Transport Profile Static. AII
Type 2 and Spoke SDP FEC offer two ways to specify a VCCV trace route
FEC-129 Pseudowire test.
In the Transport Profile Static case, the test type is configured
(using tmnxOamVccvTrCtlTestSubMode). In the other three cases, the
test type is not configured (i.e. the default
tmnxOamVccvTrCtlTestSubMode value 'unspecified(1)' is used).
The following table has a row for each VCCV trace route test type,
showing the mandatory and optional objects applicable to the test
type. Abbreviated VCCV trace route test type names are used.
Test
Type Mandatory Objects Optional Objects
------ ------------------------------ ---------------------------------
aiiTY2 tmnxOamVccvTrCtlSaiiAcId tmnxOamVccvTrCtlReplyMode
tmnxOamVccvTrCtlSaiiGlobalId
tmnxOamVccvTrCtlSaiiPrefix
tmnxOamVccvTrCtlTaiiAcId
tmnxOamVccvTrCtlTaiiGlobalId
tmnxOamVccvTrCtlTaiiPrefix
FEC128 tmnxOamVccvTrCtlSdpIdVcId tmnxOamVccvTrCtlReplyMode
*tmnxOamVccvTrCtlSwitTgtFecType
*tmnxOamVccvTrTgStaticCtlAgi
*tmnxOamVccvTrTgStaticCtlSaiiGlbl
*tmnxOamVccvTrTgStaticCtlSaiiNode
*tmnxOamVccvTrTgStaticCtlSaiiAcId
*tmnxOamVccvTrTgStaticCtlTaiiGlbl
*tmnxOamVccvTrTgStaticCtlTaiiNode
*tmnxOamVccvTrTgStaticCtlTaiiAcId
sdpFEC tmnxOamVccvTrCtlSpokeSdpId *tmnxOamVccvTrCtlSaiiAcId
*tmnxOamVccvTrCtlSaiiGlobalId
*tmnxOamVccvTrCtlSaiiPrefix
*tmnxOamVccvTrCtlTaiiAcId
*tmnxOamVccvTrCtlTaiiGlobalId
*tmnxOamVccvTrCtlTaiiPrefix
tmnxOamVccvTrCtlReplyMode
TPST tmnxOamVccvTrCtlSdpIdVcId *tmnxOamTrCtlSrcAddrType
tmnxOamVccvTrCtlTestSubMode *tmnxOamTrCtlSrcAddress
tmnxOamVccvTrCtlAssocChannel
#tmnxOamVccvTrCtlSwitTgtFecType
#tmnxOamVccvTrTgFec128CtlSrcAddrT
#tmnxOamVccvTrTgFec128CtlSrcAddr
#tmnxOamVccvTrTgFec128CtlDstAddrT
#tmnxOamVccvTrTgFec128CtlDstAddr
#tmnxOamVccvTrTgFec128CtlPwId
#tmnxOamVccvTrTgFec128CtlPwType
ALL N/A tmnxOamTrCtlDataSize
tmnxOamTrCtlFcName
tmnxOamTrCtlInitialTtl
tmnxOamTrCtlInterval
tmnxOamTrCtlMaxFailures
tmnxOamTrCtlMaxTtl
tmnxOamTrCtlProbesPerHop
tmnxOamTrCtlProfile
tmnxOamTrCtlTimeOut
------ ------------------------------ ---------------------------------
In the table above,
1. The optional objects in the ALL row apply to all four VCCV trace
route test types.
2. The characters '*' and '#' each mark an independent set of optional
objects which must all be specified, or must all be unspecified.
When an object combination other than a combination listed above is
specified, values will be rejected or ignored, or the test will fail. | ||||
| RtmnxOamVccvTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1 | NA | ||
row · not-accessible · current The system creates a row in tmnxOamVccvTrCtlTable when tmnxOamTrCtlTestMode is set to 'vccvTraceRoute'. The system destroys a row in tmnxOamVccvTrCtlTable when the corresponding row in tmnxOamTrCtlTable is destroyed. | ||||
| CtmnxOamVccvTrCtlSdpIdVcId | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.1 | SdpBindId | RW | |
column · SdpBindId · read-write · current The value of tmnxOamVccvTrCtlSdpIdVcId specifies the SDP binding of the pseudowire to be tested by a VCCV trace route test. The all-zeros value indicates an unused SDP binding. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlReplyMode | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamVccvTrCtlReplyMode specifies the band to be used by
the echo reply.
ip (2) out-of-band reply
controlChannel (4) inband reply
The supported object combinations for VCCV trace route tests are
listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamVccvTrCtlSpokeSdpId | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.3 | TmnxSpokeSdpIdOrZero | RW | |
column · TmnxSpokeSdpIdOrZero · read-write · current The value of tmnxOamVccvTrCtlSpokeSdpId specifies the spoke SDP identifier to be used when performing a VCCV trace route test on a FEC 129 pseudowire. A value of zero indicates that no spoke SDP identifier has been configured. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlSaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.4 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvTrCtlSaiiGlobalId specifies the global identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no global identifier has been configured. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlSaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvTrCtlSaiiPrefix specifies the prefix of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no prefix has been configured. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvTrCtlSaiiAcId specifies the attachment circuit identifier of the Source Attachment Individual Identifier (SAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no attachment circuit identifier has been configured. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlTaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.7 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvTrCtlTaiiGlobalId specifies the global identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no global identifier has been configured. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlTaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvTrCtlTaiiPrefix specifies the prefix of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no prefix has been configured. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.9 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvTrCtlTaiiAcId specifies the attachment circuit identifier of the Target Attachment Individual Identifier (TAII) to be used when testing a FEC 129 AII Type 2 pseudowire. A value of zero indicates that no attachment circuit identifier has been configured. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlTestSubMode | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.10 | TmnxOamVccvTrTestSubMode | RW | |
column · TmnxOamVccvTrTestSubMode · read-write · current The value of tmnxOamVccvTrCtlTestSubMode specifies the type of VCCV trace route test to perform. When this object is 'unspecified(1)', the type of VCCV trace route test to be performed is determined when the test is started, from the set of tmnxOamVccvTrCtlTable objects configured with non-default values. If there is a mismatch between tmnxOamVccvTrCtlTestSubMode and the type of the pseudowire to be tested, the test will fail. For example, if tmnxOamVccvTrCtlTestSubMode is 'static(2)', and there is no TIMETRA-SDP-MIB::sdpBindPwPathTable row for the test's SDP binding, the test will fail. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlAssocChannel | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.11 | TmnxOamVccvAssocChannel | RW | |
column · TmnxOamVccvAssocChannel · read-write · current The value of tmnxOamVccvTrCtlAssocChannel specifies the launched echo request's usage of the Associated Channel (ACH) mechanism, when performing an MPLS-TP VCCV trace route test. When tmnxOamVccvTrCtlTestSubMode is 'static(2)', the default value for tmnxOamVccvTrCtlAssocChannel is 'nonIp(2)'. The supported object combinations for VCCV trace route tests are listed in the tmnxOamVccvTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamVccvTrCtlSwitTgtFecType | 1.3.6.1.4.1.6527.3.1.2.11.2.26.1.12 | TmnxOamVccvSwitTgtFecType | RW | |
column · TmnxOamVccvSwitTgtFecType · read-write · current The value of tmnxOamVccvTrCtlSwitTgtFecType specifies the type of downstream FEC (Forward Equivalence Class) segment to be tested. This object must be set to a non-default value when the path to be tested starts with a FEC segment, and switches to a FEC segment with a different type. For example, if the path to be tested starts with a static FEC, and switches to FEC 128, this object must be set to 'fec128(2)'. | ||||
| TtmnxOamVccvTrNextPwSegmentTable | 1.3.6.1.4.1.6527.3.1.2.11.2.27 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'vccvTraceRoute' probe operation where a VCCV next hop list is returned. An entry in this table is created when the result of an OAM 'vccvTraceRoute' probe is determined. An entry is removed from this table when its corresponding tmnxOamTrProbeHistoryEntry is deleted. | ||||
| RtmnxOamVccvTrNextPwSegmentEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamVccvTrNextPwSegmentTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamVccvTrNextPwSegmentEntry belongs to. The third index element identifies an OAM trace route test run. The fourth, fifth and sixth index elements select a single OAM 'vccvTraceRoute' reply. | ||||
| CtmnxOamVccvTrNextPwID | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.1 | TmnxVcIdOrNone | RO | |
column · TmnxVcIdOrNone · read-only · current The value of tmnxOamVccvTrNextPwID indicates the next-hop pseudo-wire in the trace route operation for a specific 'vccvTraceRoute' probe reply. A value of '0' indicates that there are no further next-hops for a specific trace route operation. | ||||
| CtmnxOamVccvTrNextPwType | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.2 | SdpBindVcType | RO | |
column · SdpBindVcType · read-only · current The value of tmnxOamVccvTrNextPwType indicates the next-hop pseudo-wire type in the trace route operation for a specific 'vccvTraceRoute' probe reply. | ||||
| CtmnxOamVccvTrNextSenderAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamVccvTrNextSenderAddrType indicates the next-hop sender IP address type in the trace route operation for a specific 'vccvTraceRoute' probe reply. | ||||
| CtmnxOamVccvTrNextSenderAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamVccvTrNextSenderAddr indicates the next-hop sender IP address in the trace route operation for a specific 'vccvTraceRoute' probe reply. | ||||
| CtmnxOamVccvTrNextRemoteAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamVccvTrNextRemoteAddrType indicates the next-hop remote IP address type in the trace route operation for a specific 'vccvTraceRoute' probe reply. | ||||
| CtmnxOamVccvTrNextRemoteAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamVccvTrNextRemoteAddr indicates the next-hop remote IP address in the trace route operation for a specific 'vccvTraceRoute' probe reply. | ||||
| CtmnxOamVccvTrNextSaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.7 | TmnxPwGlobalIdOrZero | RO | |
column · TmnxPwGlobalIdOrZero · read-only · current The value of tmnxOamVccvTrNextSaiiGlobalId indicates the global identifier of the Source Attachment Individual Identifier (SAII) of a specific 'vccvTraceRoute' probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned. | ||||
| CtmnxOamVccvTrNextSaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVccvTrNextSaiiPrefix indicates the prefix of the Source Attachment Individual Identifier (SAII) of a specific 'vccvTraceRoute' probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned. | ||||
| CtmnxOamVccvTrNextSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVccvTrNextSaiiAcId indicates the attachment circuit identifier of the Source Attachment Individual Identifier (SAII) of a specific 'vccvTraceRoute' probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned. | ||||
| CtmnxOamVccvTrNextTaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.10 | TmnxPwGlobalIdOrZero | RO | |
column · TmnxPwGlobalIdOrZero · read-only · current The value of tmnxOamVccvTrNextTaiiGlobalId indicates the global identifier of the Target Attachment Individual Identifier (TAII) of a specific 'vccvTraceRoute' probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned. | ||||
| CtmnxOamVccvTrNextTaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVccvTrNextTaiiPrefix indicates the prefix of the Target Attachment Individual Identifier (TAII) of a specific 'vccvTraceRoute' probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned. | ||||
| CtmnxOamVccvTrNextTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVccvTrNextTaiiAcId indicates the attachment circuit identifier of the Target Attachment Individual Identifier (TAII) of a specific 'vccvTraceRoute' probe reply. A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was probed. Otherwise, zero is returned. | ||||
| CtmnxOamVccvTrNextTpAgi | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.13 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The value of tmnxOamVccvTrNextTpAgi indicates the Service Identifier field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, the all-zeros value is returned. | ||||
| CtmnxOamVccvTrNextTpSaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.14 | TmnxMplsTpGlobalID | RO | |
column · TmnxMplsTpGlobalID · read-only · current The value of tmnxOamVccvTrNextTpSaiiGlobalId indicates the Source Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned. | ||||
| CtmnxOamVccvTrNextTpSaiiNodeId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.15 | TmnxMplsTpNodeID | RO | |
column · TmnxMplsTpNodeID · read-only · current The value of tmnxOamVccvTrNextTpSaiiNodeId indicates the Source Node ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned. | ||||
| CtmnxOamVccvTrNextTpSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVccvTrNextTpSaiiAcId indicates the Source Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned. | ||||
| CtmnxOamVccvTrNextTpTaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.17 | TmnxMplsTpGlobalID | RO | |
column · TmnxMplsTpGlobalID · read-only · current The value of tmnxOamVccvTrNextTpTaiiGlobalId indicates the Destination Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned. | ||||
| CtmnxOamVccvTrNextTpTaiiNodeId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.18 | TmnxMplsTpNodeID | RO | |
column · TmnxMplsTpNodeID · read-only · current The value of tmnxOamVccvTrNextTpTaiiNodeId indicates the Destination Node ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned. | ||||
| CtmnxOamVccvTrNextTpTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.27.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamVccvTrNextTpTaiiAcId indicates the Destination Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU. If a pseudowire other than an MPLS-TP pseudowire was probed, zero is returned. | ||||
| TtmnxOamP2mpLspTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.28 | NA | ||
table · not-accessible · current tmnxOamP2mpLspTrCtlTable contains configuration information for 'p2mpLspTrace' tests. | ||||
| RtmnxOamP2mpLspTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.28.1 | NA | ||
row · not-accessible · current tmnxOamP2mpLspTrCtlEntry contains configuration information for one 'p2mpLspTrace' test. SROS creates a row when tmnxOamTrCtlTestMode is set to 'p2mpLspTrace'. SROS destroys a row when the corresponding tmnxOamTrCtlTable row is destroyed. | ||||
| CtmnxOamP2mpLspTrCtlLspName | 1.3.6.1.4.1.6527.3.1.2.11.2.28.1.1 | TLNamedItemOrEmpty | RW | |
column · TLNamedItemOrEmpty · read-write · current Administrative name of the target P2MP Labeled Switch Path (LSP) for this OAM P2MP LSP Trace test. This parameter is mandatory. | ||||
| CtmnxOamP2mpLspTrCtlInstName | 1.3.6.1.4.1.6527.3.1.2.11.2.28.1.2 | TNamedItemOrEmpty | RW | |
column · TNamedItemOrEmpty · read-write · current This parameter identifies an instance of a P2MP LSP, either a primary or secondary instance of a P2MP LSP Tree. | ||||
| CtmnxOamP2mpLspTrCtlLeafIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.28.1.3 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamP2mpLspTrCtlLeafIpAddr specifies the Internet address of the egress leaf node of a P2MP LSP Tree. This parameter is mandatory. | ||||
| CtmnxOamP2mpLspTrCtlLeafIpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.28.1.4 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamP2mpLspTrCtlLeafIpAddrType specifies the type of Internet address stored in tmnxOamP2mpLspTrCtlLeafIpAddr. | ||||
| TtmnxOamP2mpLspTrMapTable | 1.3.6.1.4.1.6527.3.1.2.11.2.29 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'p2mpLspTrace' probe operation when a Downstream Mapping TLV was returned. Each row represents a single label map within the returned downstream mapping TLV. An entry in this table is created when the result of an OAM 'p2mpLspTrace' probe is determined. Entries are removed from this table when the corresponding tmnxOamTrProbeHistoryEntry is deleted. | ||||
| RtmnxOamP2mpLspTrMapEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamP2mpLspTrMapTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamP2mpLspTrMapEntry belongs to. The third index element identifies an OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Nokia SROS OAM Trace Route operation. The seventh index selects a single downstream L2 map entry within the specific probe reply. | ||||
| CtmnxOamP2mpLspTrMapIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamP2mpLspTrMapIndex specifies a single L2 mapping entry within a specific 'p2mpLspTrace' probe reply. The agent starts assigning tmnxOamP2mpLspTrMapIndex values at 1. | ||||
| CtmnxOamP2mpLspTrMapDSIPv4Addr | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The value of tmnxOamP2mpLspTrMapDSIPv4Addr indicates the IPv4 address of the downstream LSR that this entry in the tmnxOamP2mpLspTrMapTable describes. If the interface to the downstream LSR is numbered, then the tmnxOamP2mpLspTrMapDSIPv4Addr can either be the downstream LSR's Router ID or the interface address of the downstream LSR. If the interface to the downstream LSR is unnumbered, the value of tmnxOamP2mpLspTrMapDSIPv4Addr indicates the downstream LSR's Router ID. | ||||
| CtmnxOamP2mpLspTrMapAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1.3 | TmnxOamAddressType | RO | |
column · TmnxOamAddressType · read-only · current The value of tmnxOamP2mpLspTrMapAddrType indicates the type of downstream interface address specified by tmnxOamP2mpLspTrMapDSIfAddr. The only valid values for tmnxOamP2mpLspTrMapAddrType are 'ipv4Address', 'ipv4Unnumbered', 'ipv6Address' and 'ipv6Unnumbered'. | ||||
| CtmnxOamP2mpLspTrMapDSIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current When tmnxOamP2mpLspTrMapAddrType has a value of 'ipv4Address' tmnxOamP2mpLspTrMapDSIfAddr indicates the downstream LSR's interface address. When tmnxOamP2mpLspTrMapAddrType has a value of 'unnumbered', tmnxOamP2mpLspTrMapDSIfAddr indicates the index assigned by the upstream LSR to the interface. | ||||
| CtmnxOamP2mpLspTrMapMTU | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1.5 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The value of tmnxOamP2mpLspTrMapMTU indicates the largest MPLS frame (including the label stack) that fits on the interface to the downstream LSR.
| ||||
| CtmnxOamP2mpLspTrMapP2mpBranch | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current When the value of tmnxOamP2mpLspTrMapP2mpBranch is 'true', the 'p2mpLspTrace' response indicates that the responding router is a branch node of the P2MP LSP tree. | ||||
| CtmnxOamP2mpLspTrMapP2mpBud | 1.3.6.1.4.1.6527.3.1.2.11.2.29.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current When the value of tmnxOamP2mpLspTrMapP2mpBud is 'true', the 'p2mpLspTrace' response indicates that the responding router is a bud node of the P2MP LSP tree. | ||||
| TtmnxOamP2mpLspTrDSLabelTable | 1.3.6.1.4.1.6527.3.1.2.11.2.30 | NA | ||
table · not-accessible · current Defines a table for storing the results of an OAM 'p2mpLspTrace' probe operation when a Downstream Mapping TLV was returned. Each row represents a single downstream label within a returned downstream L2 mapping TLV. An entry in this table is created when the result of an OAM 'p2mpLspTrace' probe is determined. Entries are removed from this table when the corresponding tmnxOamP2mpLspTrMapEntry is deleted. | ||||
| RtmnxOamP2mpLspTrDSLabelEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.30.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamP2mpLspTrDSLabelTable. The first two index elements identify the tmnxOamTrCtlEntry that a tmnxOamLspTrMapEntry belongs to. The third index element identifies a OAM trace route test run. The fourth index element selects the group of responses associated with a specific probe attempt. The fifth and sixth indexes select the hop and the probe at that hop for a particular Nokia SROS OAM Trace Route operation. The seventh index selects a single downstream L2 map entry within the specific probe reply. The eighth index selects successive downstream L2 label entries contained in a specific probe reply. | ||||
| CtmnxOamP2mpLspTrDSLabelIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.30.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The tmnxOamP2mpLspTrDSLabelIndex selects a single downstream L2 label entry within a specific L2 mapping entry reply. The agent starts assigning tmnxOamP2mpLspTrDSLabelIndex values at 1. | ||||
| CtmnxOamP2mpLspTrDSLabelLabel | 1.3.6.1.4.1.6527.3.1.2.11.2.30.1.2 | MplsLabel | RO | |
column · MplsLabel · read-only · current The value of tmnxOamP2mpLspTrDSLabelLabel is the label used by the downstream router specified by this downstream L2 label entry. | ||||
| CtmnxOamP2mpLspTrDSLabelProtocol | 1.3.6.1.4.1.6527.3.1.2.11.2.30.1.3 | TmnxOamSignalProtocol | RO | |
column · TmnxOamSignalProtocol · read-only · current The value of tmnxOamP2mpLspTrDSLabelProtocol is the signaling protocol used by the router for the label specified by this downstream L2 label entry. | ||||
| TtmnxOamEthCfmTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.31 | NA | ||
table · not-accessible · current tmnxOamEthCfmTrCtlTable contains Ethernet CFM-specific configuration information for 'ethCfmLinkTrace' tests. This table extends the tmnxOamTrCtlTable. A row is automatically created in this table when tmnxOamTrCtlTestMode is set to 'ethCfmLinkTrace'. Destroying a row in tmnxOamTrCtlTable automatically destroys the row (if any) with the same index values in tmnxOamEthCfmTrCtlTable. | ||||
| RtmnxOamEthCfmTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.31.1 | NA | ||
row · not-accessible · current tmnxOamEthCfmTrCtlEntry defines an entry in the tmnxOamEthCfmTrCtlTable. Each index is an object in tmnxOamTrCtlTable. | ||||
| CtmnxOamEthCfmTrCtlTgtMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.31.1.1 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamEthCfmTrCtlTgtMacAddr specifies the destination MAC address for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using this object) or indirectly (see the DESCRIPTION of tmnxOamEthCfmTrCtlRemoteMepId). Exactly one of tmnxOamEthCfmTrCtlTgtMacAddr and tmnxOamEthCfmTrCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. | ||||
| CtmnxOamEthCfmTrCtlSrcMdIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.31.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamEthCfmTrCtlSrcMdIndex specifies the source CFM maintenance domain index for the test. Zero is the null CFM maintenance domain index. | ||||
| CtmnxOamEthCfmTrCtlSrcMaIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.31.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamEthCfmTrCtlSrcMaIndex specifies the source CFM maintenance association index for the test. Zero is the null CFM maintenance association index. | ||||
| CtmnxOamEthCfmTrCtlSrcMepId | 1.3.6.1.4.1.6527.3.1.2.11.2.31.1.4 | Dot1agCfmMepIdOrZero | RW | |
column · Dot1agCfmMepIdOrZero · read-write · current The value of tmnxOamEthCfmTrCtlSrcMepId specifies the source Maintenance association End Point Identifier (MEP ID) for the test. Zero is the null MEP ID. | ||||
| CtmnxOamEthCfmTrCtlRemoteMepId | 1.3.6.1.4.1.6527.3.1.2.11.2.31.1.5 | Dot1agCfmMepIdOrZero | RW | |
column · Dot1agCfmMepIdOrZero · read-write · current The value of tmnxOamEthCfmTrCtlRemoteMepId specifies the remote Maintenance association End Point Identifier (MEP ID) for the test. A non-zero unicast destination MAC address is required in each test frame sent for the test. The destination MAC address can be specified directly (using tmnxOamEthCfmTrCtlTgtMacAddr) or indirectly (using this object). Exactly one of tmnxOamEthCfmTrCtlTgtMacAddr and tmnxOamEthCfmTrCtlRemoteMepId must be assigned a non-default value. Otherwise, an attempt to administratively enable the test (using tmnxOamSaaCtlAdminStatus) will fail. Suppose this object is assigned a non-default value. Then, at the start of each test run, SROS reads TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmLearnedRmtMacAddr to find the destination MAC address to use for the test run. The following index values are used for the read: tmnxOamEthCfmTrCtlSrcMdIndex, tmnxOamEthCfmTrCtlSrcMaIndex, tmnxOamEthCfmTrCtlSrcMepId, tmnxOamEthCfmTrCtlRemoteMepId. If the search fails to find a destination MAC address, no test frames will be sent for the test run. The number of frames to be sent during a test run is configured using tmnxOamTrCtlProbesPerHop, tmnxOamTrCtlInitialTtl, and tmnxOamTrCtlMaxTtl. Configuring tmnxOamEthCfmTrCtlRemoteMepId (instead of tmnxOamEthCfmTrCtlDestMacAddr) has the following advantage: if the hardware hosting the test's far end is replaced (meaning a new destination MAC address is present), the test does not need to be reconfigured. | ||||
| TtmnxOamEthCfmTrPrHistTable | 1.3.6.1.4.1.6527.3.1.2.11.2.32 | NA | ||
table · not-accessible · current tmnxOamEthCfmTrPrHistTable contains Ethernet CFM-specific probe history for 'ethCfmLinkTrace' tests. This table extends the tmnxOamTrProbeHistoryTable. A row is automatically created in this table when a row is created in tmnxOamTrProbeHistoryTable for a test with tmnxOamTrCtlTestMode set to 'ethCfmLinkTrace'. Deleting a row in tmnxOamTrProbeHistoryTable automatically deletes the row (if any) with the same index values in tmnxOamEthCfmTrPrHistTable. | ||||
| RtmnxOamEthCfmTrPrHistEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.32.1 | NA | ||
row · not-accessible · current Defines an entry in the tmnxOamEthCfmTrPrHistTable. The indices are the same as the tmnxOamTrProbeHistoryTable indices. | ||||
| CtmnxOamEthCfmTrPrHistIngressMac | 1.3.6.1.4.1.6527.3.1.2.11.2.32.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current The value of tmnxOamEthCfmTrPrHistIngressMac indicates the ingress MAC address of the probe. | ||||
| CtmnxOamEthCfmTrPrHistEgressMac | 1.3.6.1.4.1.6527.3.1.2.11.2.32.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current The value of tmnxOamEthCfmTrPrHistEgressMac indicates the egress MAC address of the probe. | ||||
| CtmnxOamEthCfmTrPrHistRelayAction | 1.3.6.1.4.1.6527.3.1.2.11.2.32.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamEthCfmTrPrHistRelayAction indicates the value of the Relay Action field in the Link Trace Reply. 'unknown(0)' is returned when a Link Trace Reply has not arrived, or the Relay Action field in the Link Trace Reply is outside the expected range.
| ||||
| CtmnxOamEthCfmTrPrHistForwarded | 1.3.6.1.4.1.6527.3.1.2.11.2.32.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamEthCfmTrPrHistForwarded indicates if a Link Trace Message was forwarded by the responding Maintenance Point (MP), as returned in the 'FwdYes' flag of the Flags field of the Link Trace Reply. | ||||
| CtmnxOamEthCfmTrPrHistTerminalMep | 1.3.6.1.4.1.6527.3.1.2.11.2.32.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamEthCfmTrPrHistTerminalMep indicates whether the forwarded Link Trace Message reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field of the Link Trace Reply. | ||||
| TtmnxOamLspTrFecStackTable | 1.3.6.1.4.1.6527.3.1.2.11.2.33 | NA | ||
table · not-accessible · current tmnxOamLspTrFecStackTable has a row for each RFC 6424 FEC (Forwarding Equivalence Class) Stack Change sub-TLV present in a currently managed 'lspTraceRoute' reply PDU. The FEC Stack Change sub-TLV is a component of the RFC 6424 Downstream Detailed Mapping TLV. An 'lspTraceRoute' reply PDU can contain several Downstream Detailed Mapping TLVs. A Downstream Detailed Mapping TLV can contain several FEC Stack Change sub-TLVs. The set of tmnxOamLspTrFecStackTable rows for a reply PDU holds the set of FEC stack changes recorded in the reply PDU, including information about MPLS tunnels and/or LSP stitching on the tested LSP. | ||||
| RtmnxOamLspTrFecStackEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1 | NA | ||
row · not-accessible · current A row in tmnxOamLspTrFecStackTable is created by the system for each RFC 6424 FEC Stack Change sub-TLV present in a currently managed 'lspTraceRoute' reply PDU. A row is deleted when the corresponding tmnxOamLspTrMapTable row is deleted. The first six indices specify an 'lspTraceRoute' reply PDU. The first seven indices specify an RFC 6424 Downstream Detailed Mapping TLV within an 'lspTraceRoute' reply PDU. The eight indices specify an RFC 6424 FEC Stack Change sub-TLV within a Downstream Detailed Mapping TLV within an 'lspTraceRoute' reply PDU. | ||||
| CtmnxOamLspTrFecStackFecIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.1 | Unsigned32 (1..8) | NA | |
column · Unsigned32 (1..8) · not-accessible · current The value of tmnxOamLspTrFecStackFecIndex specifies one RFC 6424 FEC Stack Change sub-TLV within the specified Downstream Detailed Mapping TLV. | ||||
| CtmnxOamLspTrFecStackOperType | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLspTrFecStackOperType indicates the value of the
following Operation Type field (where +-> indicates encapsulation):
'lspTraceRoute' reply PDU
+-> RFC 6424 Downstream Detailed Mapping TLV
+-> RFC 6424 FEC Stack Change sub-TLV
+-> Operation Type field.
| ||||
| CtmnxOamLspTrFecStackFecSubType | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.3 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tmnxOamLspTrFecStackFecSubType indicates the value of the
following Subtype field (where +-> indicates encapsulation):
'lspTraceRoute' reply PDU
+-> RFC 6424 Downstream Detailed Mapping TLV
+-> RFC 6424 FEC Stack Change sub-TLV
+-> RFC 4379 Target FEC Stack TLV
+-> RFC 4379 FEC-type-specific sub-TLV
(e.g. BGP labeled IPv4 prefix sub-TLV)
+-> Subtype field.
This object maps the numeric value in the Subtype field to an ASCII
string. The following examples illustrate the mapping.
Subtype Field tmnxOamLspTrFecStackFecSubType
-------------- ------------------------------
1 'LDP IPv4 prefix (1)'
3 'RSVP IPv4 LSP (3)'
12 'BGP labeled IPv4 prefix (12)'
16 'Nil FEC (16)'
99 'Unknown (99)' | ||||
| CtmnxOamLspTrFecStackPrefixType | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.4 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLspTrFecStackPrefixType indicates the type of address stored in tmnxOamLspTrFecStackPrefix. | ||||
| CtmnxOamLspTrFecStackPrefix | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.5 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLspTrFecStackPrefix indicates the value of an IP
prefix (or IP address) field with the following encapsulation
(where +-> indicates encapsulation):
'lspTraceRoute' reply PDU
+-> RFC 6424 Downstream Detailed Mapping TLV
+-> RFC 6424 FEC Stack Change sub-TLV
+-> RFC 4379 Target FEC Stack TLV
+-> RFC 4379 FEC-type-specific sub-TLV
(e.g. LDP IPv4 Prefix sub-TLV)
+-> FEC-type-specific IP prefix field.
For example, the value returned could be the content of one of the
fields shown in the following table.
Field RFC 4379 Sub-TLV
------------------ -----------------------
Extended Tunnel ID RSVP IPv4 LSP
IPv4 Prefix BGP Labeled IPv4 Prefix
IPv4 Prefix LDP IPv4 Prefix
If no IP prefix field is present in the reply PDU,
tmnxOamLspTrFecStackPrefixType contains 'unknown(1)'. | ||||
| CtmnxOamLspTrFecStackPrefixLen | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.6 | InetAddressPrefixLength | RO | |
column · InetAddressPrefixLength · read-only · current The value of tmnxOamLspTrFecStackPrefixLen indicates the value of an IP
prefix length field with the following encapsulation (where +->
indicates encapsulation):
'lspTraceRoute' reply PDU
+-> RFC 6424 Downstream Detailed Mapping TLV
+-> RFC 6424 FEC Stack Change sub-TLV
+-> RFC 4379 Target FEC Stack TLV
+-> RFC 4379 FEC-type-specific sub-TLV
(e.g. LDP IPv4 Prefix sub-TLV)
+-> FEC-type-specific IP prefix length field.
For example, the value returned could be the content of one of the
fields shown in the following table.
Field RFC 4379 Sub-TLV
------------- -----------------------
Prefix Length BGP Labeled IPv4 Prefix
Prefix Length LDP IPv4 Prefix
If no relevant IP prefix length field is present in the reply PDU,
tmnxOamLspTrFecStackPrefixLen contains 32 (for an IPv4 address), or
128 (for an IPv6 address).
| ||||
| CtmnxOamLspTrFecStackRemPeerAddrT | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.7 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLspTrFecStackRemPeerAddrT indicates the type of address stored in tmnxOamLspTrFecStackRemPeerAddr. | ||||
| CtmnxOamLspTrFecStackRemPeerAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.33.1.8 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLspTrFecStackRemPeerAddr indicates the value
contained in the remote peer address field with the following
encapsulation (where +-> indicates encapsulation):
'lspTraceRoute' reply PDU
+-> RFC 6424 Downstream Detailed Mapping TLV
+-> RFC 6424 FEC Stack Change sub-TLV
+-> Remote Peer Address field. | ||||
| TtmnxOamVccvTrTgFec128CtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.34 | NA | ||
table · not-accessible · current tmnxOamVccvTrTgFec128CtlTable contains the target information for VCCV (Virtual Circuit Connectivity Verification) trace route tests which switch to downstream FEC (Forward Equivalence Class) 128 segments. | ||||
| RtmnxOamVccvTrTgFec128CtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.34.1 | NA | ||
row · not-accessible · current tmnxOamVccvTrTgFec128CtlEntry contains the target information for a VCCV trace route test which switches to a downstream FEC 128 segment. The values in a row are used to fill a 'FEC 128 Pseudowire' sub-TLV (Type, Length, Value) within the 'Target FEC Stack' TLV within the launched VCCV trace route request. A row is created when the test's tmnxOamVccvTrCtlSwitTgtFecType is set to 'fec128(2)'. A row is destroyed when the tmnxOamVccvTrCtlTable row is destroyed. All the objects in a row must be set in one SNMP Set PDU. Otherwise, the SNMP Set PDU will be rejected. | ||||
| CtmnxOamVccvTrTgFec128CtlSrcAddrT | 1.3.6.1.4.1.6527.3.1.2.11.2.34.1.1 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVccvTrTgFec128CtlSrcAddrT specifies the address type of tmnxOamVccvTrTgFec128CtlSrcAddr. | ||||
| CtmnxOamVccvTrTgFec128CtlSrcAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.34.1.2 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVccvTrTgFec128CtlSrcAddr specifies the value to be copied into the Sender's PE Address (Sender's Provider Edge Address) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. | ||||
| CtmnxOamVccvTrTgFec128CtlDstAddrT | 1.3.6.1.4.1.6527.3.1.2.11.2.34.1.3 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamVccvTrTgFec128CtlDstAddrT specifies the address type of tmnxOamVccvTrTgFec128CtlDstAddr. | ||||
| CtmnxOamVccvTrTgFec128CtlDstAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.34.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamVccvTrTgFec128CtlDstAddr specifies the value to be copied into the 'Remote PE Address' (Remote Provider Edge Address) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. | ||||
| CtmnxOamVccvTrTgFec128CtlPwId | 1.3.6.1.4.1.6527.3.1.2.11.2.34.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvTrTgFec128CtlPwId specifies the value to be copied into the 'PW ID' (Pseudowire Identifier) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. Zero indicates no Pseudowire Identifier has been configured. | ||||
| CtmnxOamVccvTrTgFec128CtlPwType | 1.3.6.1.4.1.6527.3.1.2.11.2.34.1.6 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The value of tmnxOamVccvTrTgFec128CtlPwType specifies the value to be copied into the 'PW Type' (Pseudowire Type) field of the 'FEC 128 Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. The code points are defined in RFC 4446. SROS supports services corresponding to the following RFC 4446 PW Type code points. PW Type Description ------- --------------------------------------- 2 ATM AAL5 SDU VCC transport 3 ATM transparent cell transport 5 Ethernet 9 ATM n-to-one VCC cell transport 10 ATM n-to-one VPC cell transport 17 Structure-agnostic E1 over packet 18 Structure-agnostic T1 (DS1) over packet 21 CES over PSN basic mode 23 CES over PSN TDM with CAS Zero indicates no Pseudowire Type has been configured. | ||||
| TtmnxOamVccvTrTgStaticCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.35 | NA | ||
table · not-accessible · current tmnxOamVccvTrTgStaticCtlTable contains the target information for VCCV (Virtual Circuit Connectivity Verification) trace route tests which switch to downstream static (i.e. MPLS-TP) segments. | ||||
| RtmnxOamVccvTrTgStaticCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1 | NA | ||
row · not-accessible · current tmnxOamVccvTrTgStaticCtlEntry contains the target information for a VCCV trace route test which switches to a downstream static (i.e. MPLS-TP) segment. The values in a row are used to fill a 'Static Pseudowire' sub-TLV (Type, Length, Value) within the 'Target FEC Stack' TLV within the launched VCCV trace route request. A row is created when the test's tmnxOamVccvTrCtlSwitTgtFecType is set to 'static(3)'. A row is destroyed when the tmnxOamVccvTrCtlTable row is destroyed. All the objects in a row must be set in one SNMP Set PDU. Otherwise, the SNMP Set PDU will be rejected. | ||||
| CtmnxOamVccvTrTgStaticCtlAgi | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1.1 | TmnxVPNRouteDistinguisher | RW | |
column · TmnxVPNRouteDistinguisher · read-write · current The value of tmnxOamVccvTrTgStaticCtlAgi specifies the value to be copied into the 'Service Identifier' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. As specified in RFC 6426, the 'Service Identifier' field may be filled with an AGI (Attachment Group Identifier). The all-zeroes value indicates no Service Identifier has been configured. | ||||
| CtmnxOamVccvTrTgStaticCtlSaiiGlbl | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1.2 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvTrTgStaticCtlSaiiGlbl specifies the value to be copied into the 'Source Global ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. Zero indicates no Source Global ID has been configured. | ||||
| CtmnxOamVccvTrTgStaticCtlSaiiNode | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1.3 | TmnxMplsTpNodeID | RW | |
column · TmnxMplsTpNodeID · read-write · current The value of tmnxOamVccvTrTgStaticCtlSaiiNode specifies the value to be copied into the 'Source Node ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. Zero indicates no Source Node ID has been configured. | ||||
| CtmnxOamVccvTrTgStaticCtlSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvTrTgStaticCtlSaiiAcId specifies the value to be copied into the 'Source AC-ID' (Source Attachment Circuit Identifier) field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. Zero indicates no Source AC-ID has been configured. | ||||
| CtmnxOamVccvTrTgStaticCtlTaiiGlbl | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1.5 | TmnxPwGlobalIdOrZero | RW | |
column · TmnxPwGlobalIdOrZero · read-write · current The value of tmnxOamVccvTrTgStaticCtlTaiiGlbl specifies the value to be copied into the 'Destination Global ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. Zero indicates no Destination Global ID has been configured. | ||||
| CtmnxOamVccvTrTgStaticCtlTaiiNode | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1.6 | TmnxMplsTpNodeID | RW | |
column · TmnxMplsTpNodeID · read-write · current The value of tmnxOamVccvTrTgStaticCtlTaiiNode specifies the value to be copied into the 'Destination Node ID' field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. Zero indicates no Destination Node ID has been configured. | ||||
| CtmnxOamVccvTrTgStaticCtlTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.11.2.35.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamVccvTrTgStaticCtlTaiiAcId specifies the value to be copied into the 'Destination AC-ID' (Destination Attachment Circuit Identifier) field of the 'Static Pseudowire' sub-TLV within the 'Target FEC Stack' TLV within the launched VCCV trace route request. Zero indicates no Destination AC-ID has been configured. | ||||
| TtmnxOamIcmpTrLabelStackTable | 1.3.6.1.4.1.6527.3.1.2.11.2.36 | NA | ||
table · not-accessible · current tmnxOamIcmpTrLabelStackTable contains the information read from RFC 4950 MPLS Label Stack Objects in ICMPv4 or ICMPv6 replies, received in response to locally initiated 'icmpTraceRoute(5)' tests. | ||||
| RtmnxOamIcmpTrLabelStackEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.36.1 | NA | ||
row · not-accessible · current tmnxOamIcmpTrLabelStackEntry contains the information present in one member of an RFC 4950 MPLS Label Stack Object, as received in one ICMPv4 or ICMPv6 reply (received in response to a locally initiated 'icmpTraceRoute(5)' test). One ICMPv4 or ICMPv6 reply can contain at most one MPLS Label Stack Object. The MPLS Label Stack Object is a structure in the reply, containing the MPLS encapsulation used for the test. One MPLS Label Stack Object contains one or more members. The first six indices specify the ICMPv4 or ICMPv6 reply. The seventh index specifies the member number within the MPLS Label Stack Object. SROS creates rows in this table when an ICMPv4 or ICMPv6 reply is received (in response to a locally initiated 'icmpTraceRoute(5)' test) containing an MPLS Label Stack Object. One row is created for each member in the MPLS Label Stack Object. SROS destroys rows in this table when the corresponding tmnxOamTrProbeHistoryTable row is destroyed. | ||||
| CtmnxOamIcmpTrLabelStackMemberNum | 1.3.6.1.4.1.6527.3.1.2.11.2.36.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamIcmpTrLabelStackMemberNum specifies the member number within an RFC 4950 MPLS Label Stack Object. The first member within an MPLS Label Stack Object is member number 1. Subsequent members (if any) are numbered consecutively. | ||||
| CtmnxOamIcmpTrLabelStackLabel | 1.3.6.1.4.1.6527.3.1.2.11.2.36.1.2 | Unsigned32 (0..1048575) | RO | |
column · Unsigned32 (0..1048575) · read-only · current The value of tmnxOamIcmpTrLabelStackLabel indicates the Label field within the specified RFC 4950 MPLS Label Stack Object member. | ||||
| CtmnxOamIcmpTrLabelStackExperimnt | 1.3.6.1.4.1.6527.3.1.2.11.2.36.1.3 | Unsigned32 (0..7) | RO | |
column · Unsigned32 (0..7) · read-only · current The value of tmnxOamIcmpTrLabelStackExperimnt indicates the Experimental Use field within the specified RFC 4950 MPLS Label Stack Object member. | ||||
| CtmnxOamIcmpTrLabelStackBottom | 1.3.6.1.4.1.6527.3.1.2.11.2.36.1.4 | Unsigned32 (0..1) | RO | |
column · Unsigned32 (0..1) · read-only · current The value of tmnxOamIcmpTrLabelStackBottom indicates the Bottom of Stack bit within the specified RFC 4950 MPLS Label Stack Object member. | ||||
| CtmnxOamIcmpTrLabelStackTtl | 1.3.6.1.4.1.6527.3.1.2.11.2.36.1.5 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The value of tmnxOamIcmpTrLabelStackTtl indicates the Time To Live field within the specified RFC 4950 MPLS Label Stack Object member. | ||||
| TtmnxOamBierTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.37 | NA | ||
table · not-accessible · current tmnxOamBierTrCtlTable (along with tmnxOamTrCtlTable) contains the configuration information for BIER (Bit Index Explicit Replication) trace route tests. | ||||
| RtmnxOamBierTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.37.1 | NA | ||
row · not-accessible · current tmnxOamBierTrCtlEntry (along with tmnxOamTrCtlEntry) contains the configuration information for a BIER trace route test. A row is created when the corresponding tmnxOamTrCtlTestMode is set to 'bierTrace'. A row is destroyed when the corresponding tmnxOamTrCtlTable row is destroyed (using tmnxOamTrCtlRowStatus). The values in a particular row in this table cannot be changed when the corresponding tmnxOamTrCtlAdminStatus is 'enabled(1)'. | ||||
| CtmnxOamBierTrCtlSubDomain | 1.3.6.1.4.1.6527.3.1.2.11.2.37.1.1 | Unsigned32 (0..255) | RW | |
column · Unsigned32 (0..255) · read-write · current The value of tmnxOamBierTrCtlSubDomain specifies the BIER sub-domain to be tested. Zero indicates the default sub-domain. | ||||
| CtmnxOamBierTrCtlBfrId | 1.3.6.1.4.1.6527.3.1.2.11.2.37.1.2 | Unsigned32 (0..4096) | RW | |
column · Unsigned32 (0..4096) · read-write · current The value of tmnxOamBierTrCtlBfrId specifies the identifier of the Bit-Forwarding Router (BFR) to be traced. The BFR-ID must be a member of the tested sub-domain (as configured using tmnxOamBierTrCtlSubDomain). Otherwise, the test will fail. Zero indicates no BFR-ID has been configured. There are two methods to configure the destination to be traced: 1. tmnxOamBierTrCtlBfrId. 2. tmnxOamBierTrCtlBfrPfxAddrType, tmnxOamBierTrCtlBfrPfxAddress. Exactly one of the methods must be used. Otherwise, the test will fail. | ||||
| CtmnxOamBierTrCtlBfrPfxAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.37.1.3 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamBierTrCtlBfrPfxAddrType specifies the address type of tmnxOamBierTrCtlBfrPfxAddress. | ||||
| CtmnxOamBierTrCtlBfrPfxAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.37.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamBierTrCtlBfrPfxAddress specifies a BFR prefix used as a destination address for a BIER trace test. There are two methods to configure the destination to be traced: 1. tmnxOamBierTrCtlBfrId. 2. tmnxOamBierTrCtlBfrPfxAddrType, tmnxOamBierTrCtlBfrPfxAddress. Exactly one of the methods must be used. Otherwise, the test will fail. | ||||
| TtmnxOamBierTrProbeHistoryTable | 1.3.6.1.4.1.6527.3.1.2.11.2.38 | NA | ||
table · not-accessible · current tmnxOamBierTrProbeHistoryTable (along with tmnxOamTrProbeHistoryTable) contains the per-probe results for Bit Index Explicit Replication (BIER) trace tests. | ||||
| RtmnxOamBierTrProbeHistoryEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1 | NA | ||
row · not-accessible · current tmnxOamBierTrProbeHistoryEntry (along with tmnxOamTrProbeHistoryEntry) contains the results for one BIER trace probe. A row is created/destroyed when the corresponding tmnxOamTrProbeHistoryEntry is created/destroyed for a 'bierTrace' test. All the indices match the corresponding tmnxOamTrProbeHistoryEntry indices. | ||||
| CtmnxOamBierTrHistoryBfrId | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.1 | Unsigned32 (0..4096) | RO | |
column · Unsigned32 (0..4096) · read-only · current The value of tmnxOamBierTrHistoryBfrId indicates the identifier of the Bit-Forwarding Router (BFR) targeted by the launched BIER Echo Request. Zero is returned if the BFR-ID cannot be determined. The BFR-Prefix (which is an alternative identifier of the target) can be read using tmnxOamTrProbeHistoryAddress. | ||||
| CtmnxOamBierTrHistoryReturnCode | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.2 | TmnxOamBierHistoryReturnCode | RO | |
column · TmnxOamBierHistoryReturnCode · read-only · current The value of tmnxOamBierTrHistoryReturnCode indicates the value copied from the Return Code field of the BIER Echo Reply PDU. Zero (i.e. 'No Return Code') is returned if a BIER Echo Reply PDU did not arrive (e.g. in the case of a timeout). | ||||
| CtmnxOamBierTrHistoryUpStrIfAddrT | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamBierTrHistoryUpStrIfAddrT indicates the IP address type of the address read using tmnxOamBierTrHistoryUpStrIfAddr. | ||||
| CtmnxOamBierTrHistoryUpStrIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.4 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamBierTrHistoryUpStrIfAddr indicates the IP address copied from the Upstream Address field of the Upstream Interface TLV of the BIER Echo Reply. When an IP address is not available, tmnxOamBierTrHistoryUpStrIfAddrT is 'unknown'. If the TLV's Upstream Address field contains an interface number (as tagged by the TLV's Address Type field), the interface number is available in tmnxOamBierTrHistoryUpStrIfNum. | ||||
| CtmnxOamBierTrHistoryUpStrIfNum | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBierTrHistoryUpStrIfNum indicates the interface number copied from the Upstream Address field of the Upstream Interface TLV of the BIER Echo Reply. When an interface number is not available, tmnxOamBierTrHistoryUpStrIfNum is zero. If the TLV's Upstream Address field contains an IP address (as tagged by the TLV's Address Type field), the IP address is available in tmnxOamBierTrHistoryUpStrIfAddr. | ||||
| CtmnxOamBierTrHistoryDnStrAddrTyp | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.6 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamBierTrHistoryDnStrAddrTyp indicates the IP address type of the address read using tmnxOamBierTrHistoryDnStrAddr. | ||||
| CtmnxOamBierTrHistoryDnStrAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.7 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamBierTrHistoryDnStrAddr indicates the IP address copied from the Downstream Address field of the Downstream Mapping TLV of the BIER Echo Reply. When an IP address is not available, tmnxOamBierTrHistoryDnStrAddrTyp is 'unknown'. | ||||
| CtmnxOamBierTrHistoryDnStrIfAddrT | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.8 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamBierTrHistoryDnStrIfAddrT indicates the IP address type of the address read using tmnxOamBierTrHistoryDnStrIfAddr. | ||||
| CtmnxOamBierTrHistoryDnStrIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.9 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamBierTrHistoryDnStrIfAddr indicates the IP address copied from the Downstream Interface Address field of the Downstream Mapping TLV of the BIER Echo Reply. When an IP address is not available, tmnxOamBierTrHistoryDnStrIfAddrT is 'unknown'. If the TLV's Downstream Interface Address field contains an interface number (as tagged by the TLV's Address Type field), the interface number is available in tmnxOamBierTrHistoryDnStrIfNum. | ||||
| CtmnxOamBierTrHistoryDnStrIfNum | 1.3.6.1.4.1.6527.3.1.2.11.2.38.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamBierTrHistoryDnStrIfNum indicates the interface number copied from the Downstream Interface Address field of the Downstream Mapping TLV of the BIER Echo Reply. When an interface number is not available, tmnxOamBierTrHistoryDnStrIfNum is zero. If the TLV's Downstream Interface Address field contains an IP address (as tagged by the TLV's Address Type field), the IP address is available in tmnxOamBierTrHistoryDnStrIfAddr. | ||||
| TtmnxOamIcmpTrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.2.39 | NA | ||
table · not-accessible · current tmnxOamIcmpTrCtlTable (along with tmnxOamTrCtlTable) contains the
configuration information for 'icmpTraceRoute' tests.
Two types of 'icmpTraceRoute' tests are supported, as configured
using tmnxOamIcmpTrCtlTestSubMode. The objects which can be
configured away from default for each type are shown in the following
table.
Test Sub Mode Configurable Objects
---------------- --------------------------------
'unspecified(1)' tmnxOamIcmpTrCtlDestTcpUdpPort
tmnxOamIcmpTrCtlDestUdpPortFixed
tmnxOamIcmpTrCtlPadSize
tmnxOamIcmpTrCtlProtocol
tmnxOamTrCtlAdminStatus
tmnxOamTrCtlDSField
tmnxOamTrCtlInitialTtl
tmnxOamTrCtlMaxTtl
tmnxOamTrCtlProbesPerHop
tmnxOamTrCtlRouterInstanceName
tmnxOamTrCtlRowStatus
tmnxOamTrCtlServiceId
tmnxOamTrCtlSrcAddrType
tmnxOamTrCtlSrcAddress
tmnxOamTrCtlTestMode
tmnxOamTrCtlTgtAddrType
tmnxOamTrCtlTgtAddress
tmnxOamTrCtlTrapGeneration
tmnxOamTrCtlVRtrID
tmnxOamTrCtlWaitMilliSec
'srv6Policy(2)' tmnxOamIcmpTrCtlDestTcpUdpPort
tmnxOamIcmpTrCtlDestUdpPortFixed
tmnxOamIcmpTrCtlPadSize
tmnxOamIcmpTrCtlProtocol
tmnxOamIcmpTrCtlSrV6PlcyColor
tmnxOamIcmpTrCtlSrV6PlcyEndPtAdd
tmnxOamIcmpTrCtlSrV6PlcyEndPtAdT
tmnxOamIcmpTrCtlSrV6PlcySegList
tmnxOamIcmpTrCtlTestSubMode
tmnxOamTrCtlAdminStatus
tmnxOamTrCtlDSField
tmnxOamTrCtlInitialTtl
tmnxOamTrCtlMaxTtl
tmnxOamTrCtlProbesPerHop
tmnxOamTrCtlRowStatus
tmnxOamTrCtlTestMode
tmnxOamTrCtlTrapGeneration
tmnxOamTrCtlWaitMilliSec
tmnxOamIcmpTrCtlSrV6PyPathOwner
tmnxOamIcmpTrCtlSrV6PyPreference
tmnxOamIcmpTrCtlSrV6PyRoutDist
None of the objects in this table can be changed away from DEFVAL for
an SAA test (as created using tmnxOamSaaCtlRowStatus). | ||||
| RtmnxOamIcmpTrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1 | NA | ||
row · not-accessible · current tmnxOamIcmpTrCtlEntry (along with tmnxOamTrCtlEntry) contains the configuration information for an 'icmpTraceRoute' test. A row is created when the corresponding tmnxOamTrCtlTestMode is set to 'icmpTraceRoute'. A row is destroyed when the corresponding tmnxOamTrCtlTable row is destroyed (using tmnxOamTrCtlRowStatus). The values in a particular row in this table cannot be changed when the corresponding tmnxOamTrCtlAdminStatus is 'enabled(1)'. | ||||
| CtmnxOamIcmpTrCtlProtocol | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamIcmpTrCtlProtocol specifies the type of packet to be sent for the 'icmpTraceRoute' test. 'udp' specifies the transmission of UDP packets. 'udp' was the only supported packet type, prior to SROS Release 21.10. 'tcp' specifies the transmission of TCP SYN packets. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamIcmpTrCtlDestTcpUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.2 | Unsigned32 (1..65535) | RW | |
column · Unsigned32 (1..65535) · read-write · current The value of tmnxOamIcmpTrCtlDestTcpUdpPort specifies the destination
UDP/TCP port number(s) sent in the test's packets.
If tmnxOamIcmpTrCtlProtocol='udp', the value is a UDP port number.
In that case:
a) If tmnxOamIcmpTrCtlDestUdpPortFixed = 'true', every packet sent for
the test has destination UDP port tmnxOamIcmpTrCtlDestTcpUdpPort.
b) If tmnxOamIcmpTrCtlDestUdpPortFixed = 'false', the first packet sent
for the test has destination UDP port
tmnxOamIcmpTrCtlDestTcpUdpPort. The second packet sent
for the test has destination UDP port
tmnxOamIcmpTrCtlDestTcpUdpPort+1. Etc.
If tmnxOamIcmpTrCtlProtocol='tcp', the value is a TCP port number. In
that case, every packet sent for the test has destination TCP port
tmnxOamIcmpTrCtlDestTcpUdpPort.
The default is the port designated by IANA for UDP traceroute and TCP
traceroute.
Using, for example, the default 'icmpTraceRoute' configuration
tmnxOamIcmpTrCtlProtocol = 'udp'
tmnxOamIcmpTrCtlDestTcpUdpPort = 33434
tmnxOamIcmpTrCtlDestUdpPortFixed = 'false'
in a network with the IANA-standard mtrace UDP port 33435 configured
for mtrace may result in conflicts between 'icmpTraceRoute' tests and
mtrace.
The supported object combinations for 'icmpTraceRoute' tests are
listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpTrCtlDestUdpPortFixed | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current The value of tmnxOamIcmpTrCtlDestUdpPortFixed specifies whether or not to increment the destination UDP port number for each packet sent for a UDP 'icmpTraceRoute' test. Details are in the tmnxOamIcmpTrCtlDestTcpUdpPort DESCRIPTION clause. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpTrCtlPadSize | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.4 | Unsigned32 (0..9786) | RW | |
column · Unsigned32 (0..9786) · read-write · current The value of tmnxOamIcmpTrCtlPadSize specifies the number of padding
octets to add to the launched request packets for an 'icmpTraceRoute'
test.
Padding a request packet is typically used to ensure the test works
with large packets.
The combination
tmnxOamIcmpTrCtlPadSize > 0, and
tmnxOamIcmpTrCtlProtocol = 'tcp'
is not supported by some third party far end nodes.
tmnxOamTrCtlDataSize is ignored for 'icmpTraceRoute' tests.
The supported object combinations for 'icmpTraceRoute' tests are
listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamIcmpTrCtlTestSubMode | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamIcmpTrCtlTestSubMode specifies the type of 'icmpTraceRoute' test to perform. 'srv6Policy' specifies each launched packet contains an IPv6 Segment Routing Header (SRH; RFC 8754). 'unspecified' specifies any other 'icmpTraceRoute' test. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause.
| ||||
| CtmnxOamIcmpTrCtlSrV6PlcyColor | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamIcmpTrCtlSrV6PlcyColor specifies the Segment Routing (SR) policy color to be used for the test. A color associates an SR policy with an intent (e.g. low latency). tmnxOamIcmpTrCtlSrV6PlcyColor, tmnxOamIcmpTrCtlSrV6PlcyEndPtAdT, and tmnxOamIcmpTrCtlSrV6PlcyEndPtAdd must identify a known SR policy. Otherwise, the test will fail. The color of a static SR policy is defined using TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyColor. When configuring an SR policy 'icmpTraceRoute' test, the following objects must all be set in one snmpset PDU: tmnxOamIcmpTrCtlTestSubMode = 'srv6Policy(2)', tmnxOamIcmpTrCtlSrV6PlcyColor, tmnxOamIcmpTrCtlSrV6PlcyEndPtAdT = 'ipv6(2)', tmnxOamIcmpTrCtlSrV6PlcyEndPtAdd. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpTrCtlSrV6PlcyEndPtAdT | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.7 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamIcmpTrCtlSrV6PlcyEndPtAdT specifies the type of IP address stored in tmnxOamIcmpTrCtlSrV6PlcyEndPtAdd. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpTrCtlSrV6PlcyEndPtAdd | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.8 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamIcmpTrCtlSrV6PlcyEndPtAdd specifies the Segment
Routing (SR) policy endpoint address to be used for the test.
IPv4 addresses are not supported in this release.
tmnxOamIcmpTrCtlSrV6PlcyColor, tmnxOamIcmpTrCtlSrV6PlcyEndPtAdT, and
tmnxOamIcmpTrCtlSrV6PlcyEndPtAdd must identify a known SR policy.
Otherwise, the test will fail. The endpoint of a static SR policy
is defined using
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddrType
TIMETRA-SR-POLICY-MIB::vRtrSrStaticPlcyEndPtAddr.
When configuring an SR policy 'icmpTraceRoute' test, the following
objects must all be set in one snmpset PDU:
tmnxOamIcmpTrCtlTestSubMode = 'srv6Policy(2)',
tmnxOamIcmpTrCtlSrV6PlcyColor,
tmnxOamIcmpTrCtlSrV6PlcyEndPtAdT = 'ipv6(2)',
tmnxOamIcmpTrCtlSrV6PlcyEndPtAdd.
The supported object combinations for 'icmpTraceRoute' tests are
listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpTrCtlSrV6PlcySegList | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.9 | Unsigned32 (0..32) | RW | |
column · Unsigned32 (0..32) · read-write · current The value of tmnxOamIcmpTrCtlSrV6PlcySegList specifies the Segment Routing (SR) policy segment list to be used for the test. Zero specifies no segment list is configured. If zero is specified, SROS picks the first usable segment list when the test is started. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpTrCtlSrV6PyPreference | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.10 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamIcmpTrCtlSrV6PyPreference specifies the preference
used to identify the SRv6 policy candidate path to be tested.
In accordance with RFC 9256, all in-range values are legitimate (i.e.
there is no value to indicate the preference is absent).
When any one of the following objects is specified, all three
must be specified in the same SNMPSET PDU:
tmnxOamIcmpTrCtlSrV6PyPathOwner,
tmnxOamIcmpTrCtlSrV6PyPreference,
tmnxOamIcmpTrCtlSrV6PyRoutDist.
The supported object combinations for 'icmpTraceRoute' tests are
listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. | ||||
| CtmnxOamIcmpTrCtlSrV6PyRoutDist | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.11 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The value of tmnxOamIcmpTrCtlSrV6PyRoutDist specifies the route distinguisher used to identify the SRv6 policy candidate path to be tested. Zero indicates the route distinguisher is absent. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. See the DESCRIPTION clause for tmnxOamIcmpTrCtlSrV6PyPreference for additional information. | ||||
| CtmnxOamIcmpTrCtlSrV6PyPathOwner | 1.3.6.1.4.1.6527.3.1.2.11.2.39.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamIcmpTrCtlSrV6PyPathOwner specifies the path owner used to identify the SRv6 policy candidate path to be tested. 'none' indicates the path owner is absent. This object supports a subset of the code points supported by TIMETRA-SR-POLICY-MIB::vRtrSrPlcyPathOwner. The supported object combinations for 'icmpTraceRoute' tests are listed in the tmnxOamIcmpTrCtlTable DESCRIPTION clause. See the DESCRIPTION clause for tmnxOamIcmpTrCtlSrV6PyPreference for additional information.
| ||||
| TtmnxOamLspTrInitMapTable | 1.3.6.1.4.1.6527.3.1.2.11.2.40 | NA | ||
table · not-accessible · current tmnxOamLspTrInitMapTable contains information copied into the RFC 4379 Downstream Mapping TLVs or RFC 6424 Downstream Detailed Mapping TLVs of 'lspTraceRoute' request packets. tmnxOamLspTrMapTable contains related information. | ||||
| RtmnxOamLspTrInitMapEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1 | NA | ||
row · not-accessible · current tmnxOamLspTrInitMapEntry contains information copied by the originating node into the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV of the first request packet of the 'lspTraceRoute' test run. The first three indices specify an 'lspTraceRoute' test run. The fourth index specifies one TLV in a request packet. Rows are created when an 'lspTraceRoute' is started (using tmnxOamTrCtlAdminStatus). Rows are destroyed when the parent tmnxOamTrResultsTable row is destroyed. | ||||
| CtmnxOamLspTrInitMapIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamLspTrInitMapIndex specifies one RFC 4379 Downstream Mapping TLV (or one RFC 6424 Downstream Detailed Mapping TLV) within the first request packet sent for the specified test run. The agent starts assigning tmnxOamLspTrInitMapIndex values at 1 for each tmnxOamTrResultsTestRunIndex. | ||||
| CtmnxOamLspTrInitMapAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.2 | TmnxOamAddressType | RO | |
column · TmnxOamAddressType · read-only · current The value of tmnxOamLspTrInitMapAddrType indicates the value copied into the Address Type field of the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV within the test run's first request packet. This numbering is proprietary. The proprietary value is mapped to the standard value before being copied into the request packet. See the DESCRIPTION clause for tmnxOamLspTrMapAddrType for more information. | ||||
| CtmnxOamLspTrInitMapMTU | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.3 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The value of tmnxOamLspTrInitMapMTU indicates the value copied into the Maximum Transmission Unit (MTU) field of the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV within the test run's first request packet.
| ||||
| CtmnxOamLspTrInitMapDsEgrIfNum | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLspTrInitMapDsEgrIfNum indicates the interface number copied into the Downstream IP Address field of the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV within the test run's first request packet. Zero indicates no interface number is available. | ||||
| CtmnxOamLspTrInitMapDsIpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLspTrInitMapDsIpAddrType indicates the type of address in tmnxOamLspTrInitMapDsIpAddr. | ||||
| CtmnxOamLspTrInitMapDsIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLspTrInitMapDsIpAddr indicates the value copied into the Downstream Address field of the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV within the test run's first request packet. | ||||
| CtmnxOamLspTrInitMapDsIfAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.7 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLspTrInitMapDsIfAddrType indicates the type of address in tmnxOamLspTrInitMapDsIfAddr. | ||||
| CtmnxOamLspTrInitMapDsIfAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.40.1.8 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLspTrInitMapDsIfAddr indicates the value copied into the Downstream Interface Address field of the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV within the test run's first request packet. | ||||
| TtmnxOamLspTrInitDSLabelTable | 1.3.6.1.4.1.6527.3.1.2.11.2.41 | NA | ||
table · not-accessible · current tmnxOamLspTrInitDSLabelTable contains MPLS downstream label information copied into the RFC 4379 Downstream Mapping TLVs or RFC 6424 Downstream Detailed Mapping TLVs of 'lspTraceRoute' request packets. tmnxOamLspTrDSLabelTable contains related information. | ||||
| RtmnxOamLspTrInitDSLabelEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.41.1 | NA | ||
row · not-accessible · current tmnxOamLspTrInitDSLabelEntry contains MPLS downstream label
information copied by the originating node into the specified RFC 4379
Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV of
the first request packet of the 'lspTraceRoute' test run.
The first three indices specify an 'lspTraceRoute' test run. The
fourth index specifies one TLV in the request packet. The fifth index
specifies a {Downstream Label, Protocol} pair within the TLV.
Rows are created/destroyed when the parent tmnxOamLspTrInitMapTable
row is created/destroyed. | ||||
| CtmnxOamLspTrInitDSLabelIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.41.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamLspTrInitDSLabelIndex specifies one RFC 4379
Downstream Mapping (or one RFC 6424 Downstream Detailed Mapping)
{Downstream Label, Protocol} pair.
The agent starts assigning tmnxOamLspTrInitDSLabelIndex values at 1
for each tmnxOamLspTrInitMapIndex. | ||||
| CtmnxOamLspTrInitDSLabel | 1.3.6.1.4.1.6527.3.1.2.11.2.41.1.2 | Unsigned32 (0..16777215) | RO | |
column · Unsigned32 (0..16777215) · read-only · current The value of tmnxOamLspTrInitDSLabel indicates the value copied into the specified Downstream Label field of the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV. | ||||
| CtmnxOamLspTrInitDSLabelProtocol | 1.3.6.1.4.1.6527.3.1.2.11.2.41.1.3 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The value of tmnxOamLspTrInitDSLabelProtocol indicates the value copied into the specified Protocol field of the specified RFC 4379 Downstream Mapping TLV or RFC 6424 Downstream Detailed Mapping TLV. | ||||
| TtmnxOamIcmpTrOrDgHdrTable | 1.3.6.1.4.1.6527.3.1.2.11.2.42 | NA | ||
table · not-accessible · current tmnxOamIcmpTrOrDgHdrTable contains the types of the headers within
Original Datagram fields within ICMPv6 responses triggered by
'icmpTraceRoute' tests.
More detailed information read from Original Datagram fields is
available in
tmnxOamIcmpTrOrDgIPv6Table
tmnxOamIcmpTrOrDgSrhTable
tmnxOamIcmpTrOrDgSrhSgListTable. | ||||
| RtmnxOamIcmpTrOrDgHdrEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.42.1 | NA | ||
row · not-accessible · current tmnxOamIcmpTrOrDgHdrEntry contains the type of one header within one Original Datagram field within one ICMPv6 response triggered by one 'icmpTraceRoute' request probe. The first six indices specify an 'icmpTraceRoute' ICMPv6 response. The seventh index specifies one header within the Original Datagram field of the response. Rows are created when a managed 'icmpTraceRoute' ICMPv6 response arrives with a parseable Original Datagram field. Rows are destroyed when the parent tmnxOamTrProbeHistoryTable row is destroyed. | ||||
| CtmnxOamIcmpTrOrDgHdrIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.42.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamIcmpTrOrDgHdrIndex specifies one header within one Original Datagram field within one ICMPv6 response. For each Original Datagram field received, SROS starts assigning tmnxOamIcmpTrOrDgHdrIndex values at 1. | ||||
| CtmnxOamIcmpTrOrDgHdrType | 1.3.6.1.4.1.6527.3.1.2.11.2.42.1.2 | TmnxOamIcmpOrigDatagramHdrType | RO | |
column · TmnxOamIcmpOrigDatagramHdrType · read-only · current The value of tmnxOamIcmpTrOrDgHdrType indicates the type of the specified header within one Original Datagram field within one ICMPv6 response. | ||||
| TtmnxOamIcmpTrOrDgIPv6Table | 1.3.6.1.4.1.6527.3.1.2.11.2.43 | NA | ||
table · not-accessible · current tmnxOamIcmpTrOrDgIPv6Table contains the fields of IPv6 headers within Original Datagram fields within ICMPv6 responses triggered by 'icmpTraceRoute' tests. | ||||
| RtmnxOamIcmpTrOrDgIPv6Entry | 1.3.6.1.4.1.6527.3.1.2.11.2.43.1 | NA | ||
row · not-accessible · current tmnxOamIcmpTrOrDgIPv6Entry contains the fields of one IPv6 header within one Original Datagram field within one ICMPv6 response triggered by one 'icmpTraceRoute' request probe. The first six indices specify an 'icmpTraceRoute' ICMPv6 response. The seventh index specifies one IPv6 header within the Original Datagram field of the response. Rows are created when a managed 'icmpTraceRoute' ICMPv6 response arrives with a parseable Original Datagram field, containing one or more IPv6 headers. A row is destroyed when the parent tmnxOamIcmpTrOrDgHdrTable row is destroyed. | ||||
| CtmnxOamIcmpTrOrDgIPv6DscpName | 1.3.6.1.4.1.6527.3.1.2.11.2.43.1.1 | TDSCPName | RO | |
column · TDSCPName · read-only · current The value of tmnxOamIcmpTrOrDgIPv6DscpName indicates a DSCP name derived from the Traffic Class field in the specified IPv6 header. | ||||
| CtmnxOamIcmpTrOrDgIPv6HopLimit | 1.3.6.1.4.1.6527.3.1.2.11.2.43.1.2 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The value of tmnxOamIcmpTrOrDgIPv6HopLimit indicates the Hop Limit field in the specified IPv6 header. | ||||
| CtmnxOamIcmpTrOrDgIPv6SrcAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.43.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamIcmpTrOrDgIPv6SrcAddrType indicates the address type of tmnxOamIcmpTrOrDgIPv6SrcAddress. 'ipv6(2)' is always returned. | ||||
| CtmnxOamIcmpTrOrDgIPv6SrcAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.43.1.4 | InetAddress (SIZE (16)) | RO | |
column · InetAddress (SIZE (16)) · read-only · current The value of tmnxOamIcmpTrOrDgIPv6SrcAddress indicates the Source Address (SA) field in the specified IPv6 header. | ||||
| CtmnxOamIcmpTrOrDgIPv6DstAddrType | 1.3.6.1.4.1.6527.3.1.2.11.2.43.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamIcmpTrOrDgIPv6DstAddrType indicates the address type of tmnxOamIcmpTrOrDgIPv6DstAddress. 'ipv6(2)' is always returned. | ||||
| CtmnxOamIcmpTrOrDgIPv6DstAddress | 1.3.6.1.4.1.6527.3.1.2.11.2.43.1.6 | InetAddress (SIZE (16)) | RO | |
column · InetAddress (SIZE (16)) · read-only · current The value of tmnxOamIcmpTrOrDgIPv6DstAddress indicates the Destination Address (DA) field in the specified IPv6 header. | ||||
| TtmnxOamIcmpTrOrDgSrhTable | 1.3.6.1.4.1.6527.3.1.2.11.2.44 | NA | ||
table · not-accessible · current tmnxOamIcmpTrOrDgSrhTable contains the fields of Segment Routing Headers within Original Datagram fields within ICMPv6 responses triggered by 'icmpTraceRoute' tests. The SRH Segment List addresses are available in tmnxOamIcmpTrOrDgSrhSgListTable. | ||||
| RtmnxOamIcmpTrOrDgSrhEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.44.1 | NA | ||
row · not-accessible · current tmnxOamIcmpTrOrDgSrhEntry contains the fields of one SRH within one Original Datagram field within one ICMPv6 response triggered by one 'icmpTraceRoute' request probe. The first six indices specify an 'icmpTraceRoute' ICMPv6 response. The seventh index specifies one SRH within the Original Datagram field of the response. Rows are created when a managed 'icmpTraceRoute' ICMPv6 response arrives with a parseable Original Datagram field, containing one or more Segment Routing Headers. A row is destroyed when the parent tmnxOamIcmpTrOrDgHdrTable row is destroyed. | ||||
| CtmnxOamIcmpTrOrDgSrhSegmntsLeft | 1.3.6.1.4.1.6527.3.1.2.11.2.44.1.1 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The value of tmnxOamIcmpTrOrDgSrhSegmntsLeft indicates the Segments Left field in the specified SRH. | ||||
| TtmnxOamIcmpTrOrDgSrhSgListTable | 1.3.6.1.4.1.6527.3.1.2.11.2.45 | NA | ||
table · not-accessible · current tmnxOamIcmpTrOrDgSrhSgListTable contains the Segment List addresses within Segment Routing Headers within Original Datagram fields within ICMPv6 responses triggered by 'icmpTraceRoute' tests. tmnxOamIcmpTrOrDgSrhTable contains other SRH information. | ||||
| RtmnxOamIcmpTrOrDgSrhSgListEntry | 1.3.6.1.4.1.6527.3.1.2.11.2.45.1 | NA | ||
row · not-accessible · current tmnxOamIcmpTrOrDgSrhSgListEntry contains one Segment List address within one SRH within one Original Datagram field within one ICMPv6 response triggered by one 'icmpTraceRoute' request probe. The first six indices specify an 'icmpTraceRoute' ICMPv6 response. The seventh index specifies one SRH within the Original Datagram field of the response. The eighth index specifies one Segment List address within the SRH. Rows are created when a managed 'icmpTraceRoute' ICMPv6 response arrives with a parseable Original Datagram field, containing one or more Segment Routing Headers with Segment List addresses. Rows are destroyed when the parent tmnxOamIcmpTrOrDgSrhTable row is destroyed. | ||||
| CtmnxOamIcmpTrOrDgSrhSgListIndex | 1.3.6.1.4.1.6527.3.1.2.11.2.45.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamIcmpTrOrDgSrhSgListIndex specifies one RFC 8754 Segment List entry within one SRH within one Original Datagram field within one ICMPv6 response. For each SRH received, SROS starts assigning tmnxOamIcmpTrOrDgSrhSgListIndex values at 1. RFC 8754 numbers the Segment List entries from 0. Numbering from 1 is used here to meet the SNMP table indexing convention. | ||||
| CtmnxOamIcmpTrOrDgSrhSgListAddrT | 1.3.6.1.4.1.6527.3.1.2.11.2.45.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamIcmpTrOrDgSrhSgListAddrT indicates the address type of tmnxOamIcmpTrOrDgSrhSgListAddr. 'ipv6(2)' is always returned. | ||||
| CtmnxOamIcmpTrOrDgSrhSgListAddr | 1.3.6.1.4.1.6527.3.1.2.11.2.45.1.3 | InetAddress (SIZE (16)) | RO | |
column · InetAddress (SIZE (16)) · read-only · current The value of tmnxOamIcmpTrOrDgSrhSgListAddr indicates one RFC 8754 Segment List address. | ||||
| NtmnxOamSaaObjs | 1.3.6.1.4.1.6527.3.1.2.11.3 | |||
| NtmnxOamSaaNotifyObjects | 1.3.6.1.4.1.6527.3.1.2.11.3.1 | |||
| TtmnxOamSaaCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.3.2 | NA | ||
table · not-accessible · current tmnxOamSaaCtlTable contains configuration and status information for
Service Assurance Agent (SAA) tests.
A TIMETRA-OAM-TEST-MIB test has one of two retention types.
1. An SAA test has a tmnxOamSaaCtlTable row. All the configuration
information for an SAA test is retained across an SROS CPM activity
switch or an SROS CPM reset.
2. An OAM test does not have a tmnxOamSaaCtlTable row. All the
configuration information for an OAM test is forgotten across an SROS
CPM activity switch or an SROS CPM reset.
SAA tests are supported for a subset of the test types, as described
in the following DESCRIPTION clauses:
tmnxOamPingCtlTestMode
tmnxOamTrCtlTestMode.
The results of an SAA test run (or an OAM test run) are stored in the
ping or trace route results tables (e.g. tmnxOamPingResultsTable,
tmnxOamPingHistoryTable, tmnxOamTrResultsTable, tmnxOamTrHopsTable,
tmnxOamTrProbeHistoryTable). | ||||
| RtmnxOamSaaCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1 | NA | ||
row · not-accessible · current tmnxOamSaaCtlEntry contains the configuration and status information for one SAA test. Rows are created and destroyed using tmnxOamSaaCtlRowStatus. | ||||
| CtmnxOamSaaCtlOwnerIndex | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.1 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamSaaCtlOwnerIndex specifies the name of the owner of the test. | ||||
| CtmnxOamSaaCtlTestIndex | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.2 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamSaaCtlTestIndex specifies the test name of the test. The test is identified by the owner name and the test name. One owner typically owns several tests. This indexing method ensures tests created by several owners have unique indices. | ||||
| CtmnxOamSaaCtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamSaaCtlRowStatus specifies the row status of the
SAA test.
When creating an SAA test
1. The tmnxOamSaaCtlTable row must be created first.
2. The tmnxOamPingCtlTable or tmnxOamTrCtlTable row must be created
second.
Destroying a tmnxOamSaaCtlTable row destroys the corresponding
tmnxOamPingCtlTable or tmnxOamTrCtlTable row (if any).
An attempt to destroy a tmnxOamSaaCtlTable row will fail if
tmnxOamSaaCtlAdminStatus is 'inService(2)'. | ||||
| CtmnxOamSaaCtlStorageType | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.4 | StorageType | RC | obsolete |
column · StorageType · read-create · obsolete This object was marked obsolete in SROS Release 14.0 R1. There is no replacement object. | ||||
| CtmnxOamSaaCtlLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.5 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamSaaCtlLastChanged indicates the time the value of a settable object in this row was last changed. | ||||
| CtmnxOamSaaCtlAdminStatus | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.6 | TmnxAdminState | RC | |
column · TmnxAdminState · read-create · current The value of tmnxOamSaaCtlAdminStatus specifies the administrative state of the SAA test. tmnxOamSaaCtlAdminStatus = 'inService(2)' is a prerequisite for starting an SAA test run. Once that prerequisite is met, the test run can be started by setting the corresponding tmnxOamPingCtlAdminStatus or tmnxOamTrCtlAdminStatus to 'enabled(1)'. When the tmnxOamSaaCtlAdminStatus is 'inService(2)', an attempt to modify any other configurable run-time property of the test (e.g. tmnxOamPingCtlProbeCount, tmnxOamTrCtlFcName) will fail. | ||||
| CtmnxOamSaaCtlDescr | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.7 | TItemDescription | RC | |
column · TItemDescription · read-create · current The value of tmnxOamSaaCtlDescr specifies the description of the SAA test. | ||||
| CtmnxOamSaaCtlTestMode | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.8 | TmnxOamTestMode | RO | |
column · TmnxOamTestMode · read-only · current The value of tmnxOamSaaCtlTestMode indicates the type of SAA test to be performed. When the value of this object is 'notConfigured(0)', no associated row exists in either tmnxOamPingCtlTable or tmnxOamTrCtlTable. When the value of this object is 'ping(1)', an associated row exists in the tmnxOamPingCtlTable. When the value of this object is 'traceroute(2)', an associated row exists in the tmnxOamTrCtlTable. | ||||
| CtmnxOamSaaCtlRuns | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamSaaCtlRuns indicates the number of times this SAA test has started. | ||||
| CtmnxOamSaaCtlFailures | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamSaaCtlFailures indicates the number of times this SAA test has failed. | ||||
| CtmnxOamSaaCtlLastRunResult | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.11 | TmnxOamTestResult | RO | |
column · TmnxOamTestResult · read-only · current The value of tmnxOamSaaCtlLastRunResult indicates the completion status the last time this test was executed. If this SAA test is currently in progress, this object indicates the result of the previous test run, if any. | ||||
| CtmnxOamSaaCtlAcctPolicyId | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.12 | Integer32 (0..99) | RC | |
column · Integer32 (0..99) · read-create · current The value of tmnxOamSaaCtlAcctPolicyId specifies the accounting policy used to record the information obtained from the results tables. A value of zero specifies no accounting policy. A non-zero accounting policy must be configured with the SAA record generation option. For example, an attempt to set this object to 99 will be rejected if TIMETRA-LOG-MIB::tmnxLogApRecord.99 is not 'saa(32)'. | ||||
| CtmnxOamSaaCtlSuppressAccounting | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamSaaCtlSuppressAccounting specifies whether or not the accounting file update is suppressed. The value 'true(1)' is applicable only when an accounting policy has been specified using tmnxOamSaaCtlAcctPolicyId. Upon completion of a test run, this object is reset to its default value. | ||||
| CtmnxOamSaaCtlContinuous | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamSaaCtlContinuous specifies whether or not the SAA test is to be executed indefinitely. Setting tmnxOamSaaCtlContinuous to 'true(1)' is accepted for the following ping test types: 'cpePing (12)', 'dnsPing (16)', 'ethCfmLoopback (19)', 'ethCfmTwoWayDelay (20)', 'ethCfmTwoWaySlm (22)', 'icmpPing (15)', 'lspPing ( 8)', 'macPing ( 5)', 'sdpPing ( 1)', 'vccvPing (14)', 'vprnPing ( 9)'. Setting tmnxOamSaaCtlContinuous to 'true(1)' is accepted for the following trace test types: 'ethCfmLinkTrace (9)'. | ||||
| CtmnxOamSaaCtlKeepProbeHistoryAdm | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamSaaCtlKeepProbeHistoryAdm specifies whether or not per-probe history table rows will be created for this test. A test without per-probe history table rows consumes less CPM RAM. tmnxOamSaaCtlKeepProbeHistoryOpr is a read-only operational value derived from tmnxOamSaaCtlKeepProbeHistoryAdm. The bulk of the tmnxOamSaaCtlKeepProbeHistoryAdm semantics are described in the tmnxOamSaaCtlKeepProbeHistoryOpr DESCRIPTION clause. An attempt to set tmnxOamSaaCtlKeepProbeHistoryAdm to 'drop(2)' when tmnxOamSaaCtlTestMode is not 'ping(1)' returns an 'inconsistentValue' error to the manager.
| ||||
| CtmnxOamSaaCtlKeepProbeHistoryOpr | 1.3.6.1.4.1.6527.3.1.2.11.3.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamSaaCtlKeepProbeHistoryOpr indicates whether or not
per-probe history table rows will be created for this test. A test
without per-probe history table rows consumes less CPM RAM.
The value of tmnxOamSaaCtlKeepProbeHistoryOpr is derived from the
value of tmnxOamSaaCtlKeepProbeHistoryAdm, as shown in the following
table.
tmnxOamSaaCtlKeepProbeHistoryAdm tmnxOamSaaCtlKeepProbeHistoryOpr
-------------------------------- --------------------------------------
'keep(1)' 'keep(1)'
'drop(2)' 'drop(2)'
'auto(3)' 'keep(1)' or 'drop(2)', chosen by SROS
The history table rows created for the combinations of
tmnxOamSaaCtlKeepProbeHistoryOpr and tmnxOamSaaCtlTestMode values are
shown in the following table.
Configuration Options History Table Rows Created
-------------------------- --------------------------
'keep(1)', 'ping(1)' tmnxOamPingHistoryTable or
tmnxOamMacPingHistoryTable
'keep(1)', 'traceroute(2)' tmnxOamTrProbeHistoryTable
'drop(2)', 'ping(1)' none
'drop(2)', 'traceroute(2)' unsupported combination.
If tmnxOamSaaCtlTestMode is 'notConfigured(0)', the value of
tmnxOamSaaCtlKeepProbeHistoryOpr is insignificant, since a test without
a test mode cannot be started. When a Get is performed on
tmnxOamSaaCtlKeepProbeHistoryOpr in this case, 'keep(1)' is returned.
If tmnxOamSaaCtlKeepProbeHistoryAdm is 'auto(3)':
1. tmnxOamSaaCtlKeepProbeHistoryOpr is 'drop(2)' if
a) the test's probe count is greater than 100, OR
b) the test's interval is less than one second, OR
c) tmnxOamSaaCtlTestMode is 'ping(1)' AND the test is continuous
(i.e. tmnxOamSaaCtlContinuous is 'true') AND an accounting
policy is specified (i.e. tmnxOamSaaCtlAcctPolicyId is non-
zero).
2. Otherwise, tmnxOamSaaCtlKeepProbeHistoryOpr is 'keep(1)'.
| ||||
| TtmnxOamSaaThresholdTable | 1.3.6.1.4.1.6527.3.1.2.11.3.3 | NA | ||
table · not-accessible · current tmnxOamSaaThresholdTable contains notification threshold information for SAA tests. | ||||
| RtmnxOamSaaThresholdEntry | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1 | NA | ||
row · not-accessible · current tmnxOamSaaThresholdEntry contains the configuration and status
information for one notification threshold for an SAA test.
The first two indices specify the SAA test.
The third index specifies the type of threshold (e.g. inbound
latency).
The fourth index specifies whether the threshold is
'rising (1)' - a raise threshold, or
'falling(2)' - a clear threshold.
The notification tmnxOamSaaThreshold is generated when a threshold is
crossed.
A row is created/destroyed using tmnxOamSaaTRowStatus. | ||||
| CtmnxOamSaaTType | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.1 | TmnxOamSaaThreshold | NA | |
column · TmnxOamSaaThreshold · not-accessible · current The value of tmnxOamSaaTType specifies the type of monitored statistic used to determine if a tmnxOamSaaThreshold notification is generated at the completion of an SAA test run. Some combinations of threshold type and test type are not supported. For example, 'inLatency(7)' is not supported for 'ethCfmLoopback(19)'. | ||||
| CtmnxOamSaaTDirection | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current The value of tmnxOamSaaTDirection specifies whether to monitor this threshold for crossing in the rising or falling direction.
| ||||
| CtmnxOamSaaTRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamSaaTRowStatus controls creation and deletion of row entries in the tmnxOamSaaThresholdTable. When a row in this table is created, tmnxOamSaaTThreshold must also be set or the row creation will fail with an inconsistentValue error. | ||||
| CtmnxOamSaaTLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.4 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamSaaTLastChanged indicates the last time the value of tmnxOamSaaTThreshold was modified. | ||||
| CtmnxOamSaaTThreshold | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.5 | Unsigned32 (0..2147483647) | RC | |
column · Unsigned32 (0..2147483647) · read-create · current The value of tmnxOamSaaTThreshold specifies the threshold value to monitor to determine when to generate a tmnxOamSaaThreshold notification. A threshold value must be set when the row entry is created. | ||||
| CtmnxOamSaaTValue | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tmnxOamSaaTValue indicates the value of the statistic that last caused a tmnxOamSaaThreshold notification to be generated. | ||||
| CtmnxOamSaaTLastSent | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.7 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamSaaTLastSent indicates the last time a tmnxOamSaaThreshold notification was generated as a result of crossing the threshold specified by the value of tmnxOamSaaTThreshold. | ||||
| CtmnxOamSaaTTestMode | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.8 | TmnxOamTestMode | RO | |
column · TmnxOamTestMode · read-only · current The value of tmnxOamSaaTTestMode indicates the type of SAA test for which a tmnxOamSaaThreshold notification was generated as a result of crossing the threshold specified by the value of tmnxOamSaaTThreshold. When the value of this object is 'notConfigured', no associated entry exists in either the tmnxOamPingCtlTable or tmnxOamTrCtlTable. When the value of this object is 'ping', an associated test entry is configured in the tmnxOamPingCtlTable. When the value of this object is 'traceroute', an associated test entry is configured in the tmnxOamTrCtlTable. | ||||
| CtmnxOamSaaTTestRunIndex | 1.3.6.1.4.1.6527.3.1.2.11.3.3.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamSaaTTestRunIndex indicates the test run index of the SAA test for which the last tmnxOamSaaThreshold notification was generated as a result of crossing the threshold specified by the value of tmnxOamSaaTThreshold. When the value of tmnxOamSaaTTestMode is 'ping', the value of this object is the value of the tmnxOamPingResultsTestRunIndex that identifies entries for the ping test results of the test run that generated the last tmnxOamSaaThreshold notification. When the value of tmnxOamSaaTTestMode is 'traceroute', the value of this object is the value of the tmnxOamTrResultsTestRunIndex that identifies entries for the traceroute test results of the test run that generated the last tmnxOamSaaThreshold notification. When the value of tmnxOamSaaTTestMode is 'notConfigured', the value of this object is zero. | ||||
| NtmnxOamMobGatewayObjs | 1.3.6.1.4.1.6527.3.1.2.11.4 | |||
| TtmnxOamMobGtpPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.4.1 | NA | ||
table · not-accessible · current tmnxOamMobGtpPingCtlTable contains configuration information for 'gtpPing' tests. | ||||
| RtmnxOamMobGtpPingCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.4.1.1 | NA | ||
row · not-accessible · current tmnxOamMobGtpPingCtlEntry contains configuration information for one 'gtpPing' test. SROS creates a row when tmnxOamPingCtlTestMode is set to 'gtpPing'. SROS destroys a row when the corresponding tmnxOamPingCtlTable row is destroyed. | ||||
| CtmnxOamMobGtpPingRefPointType | 1.3.6.1.4.1.6527.3.1.2.11.4.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamMobGtpPingRefPointType specifies the reference point type. This object is required.
| ||||
| CtmnxOamMobGtpPingVRtrId | 1.3.6.1.4.1.6527.3.1.2.11.4.1.1.2 | TmnxVRtrID | RW | obsolete |
column · TmnxVRtrID · read-write · obsolete This object was marked obsolete in SROS Release 16.0 R1. The replacement object is tmnxOamPingCtlVRtrID. | ||||
| CtmnxOamMobGtpPingPort | 1.3.6.1.4.1.6527.3.1.2.11.4.1.1.3 | InetPortNumber | RW | |
column · InetPortNumber · read-write · current The value of tmnxOamMobGtpPingPort specifies the UDP port number of the destination. This object is required. | ||||
| CtmnxOamMobGtpPingGateway | 1.3.6.1.4.1.6527.3.1.2.11.4.1.1.4 | TmnxMobGwId | RW | |
column · TmnxMobGwId · read-write · current The value of tmnxOamMobGtpPingGateway specifies the mobile gateway id. This object is required. | ||||
| NtmnxOamDnsPingCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.4.3 | |||
| NtmnxOamGeneralObjs | 1.3.6.1.4.1.6527.3.1.2.11.5 | |||
| StmnxOamMplsPduTimeStampFormat | 1.3.6.1.4.1.6527.3.1.2.11.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The value of tmnxOamMplsPduTimeStampFormat specifies, on a system wide
basis:
a) the format of the time stamp to be written into an RFC 4379 MPLS
Echo Request PDU, when initiating a ping or trace route test,
and
b) the format of the time stamp to be written into an RFC 4379 MPLS
Echo Reply PDU, when replying to an incoming MPLS Echo Request PDU,
and
c) the format to use when decoding the time stamps in an incoming MPLS
Echo Request or MPLS Echo Reply PDU.
'rfc4379(0)' specifies the RFC 4379 time stamp format. The time
stamp's 'seconds' field holds the integral number of seconds since
1-Jan-1900 00:00:00 UTC. The time stamp's 'microseconds' field
contains a microseconds value in the range 0..999999. This setting is
used to interoperate with network elements which are fully compliant
with RFC 4379 (e.g. an SROS system with the same setting, or any other
RFC 4379 compliant router).
'unix(1)' specifies the Unix time stamp format. The time stamp's
'seconds' field holds a 'Unix time', i.e. the integral number of
seconds since 1-Jan-1970 00:00:00 UTC. The time stamp's 'microseconds'
field contains a microseconds value in the range 0..999999. This
setting is used to interoperate with network elements which send and
expect a 1970-based timestamp in MPLS Echo Request/Reply PDUs (e.g. an
SROS system with the same setting, or an SROS system running software
earlier than R8.0 R4).
Prior to SROS Release 8.0 R4, this object was not supported. The Unix
time stamp format was always used.
This object is applicable for the following test types:
'ldpTreeTrace',
'lspPing',
'lspTraceRoute',
'p2mpLspPing',
'p2mpLspTrace',
'vccvPing',
'vccvTraceRoute'.
| ||||
| NtmnxOamGeneralStats | 1.3.6.1.4.1.6527.3.1.2.11.5.2 | |||
| StmnxOamSysPerfOprLimitTx | 1.3.6.1.4.1.6527.3.1.2.11.5.2.1 | Gauge32 | RO | obsolete |
scalar · Gauge32 · read-only · obsolete This object was marked obsolete in release 21.
| ||||
| StmnxOamSysPerfCfgLimitTx | 1.3.6.1.4.1.6527.3.1.2.11.5.2.2 | Gauge32 | RO | obsolete |
scalar · Gauge32 · read-only · obsolete This object was marked obsolete in SROS Release 21.
Replacement objects:
TIMETRA-OAM-PM-MIB::tmnxOamPmStsTxLimit
TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTxLimit
TIMETRA-OAM-TEST-MIB::tmnxOamSysTxLimit.
| ||||
| StmnxOamSysPerfCfgTotalTx | 1.3.6.1.4.1.6527.3.1.2.11.5.2.3 | Gauge32 | RO | obsolete |
scalar · Gauge32 · read-only · obsolete This object was marked obsolete in SROS Release 21.
Replacement objects:
TIMETRA-OAM-PM-MIB::tmnxOamPmStsTxTotal
TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTxTotal
TIMETRA-OAM-TEST-MIB::tmnxOamSysTxTotal.
| ||||
| StmnxOamSysPerfLastClearedTime | 1.3.6.1.4.1.6527.3.1.2.11.5.2.4 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The value of tmnxOamSysPerfLastClearedTime indicates the sysUpTime when
the following statistics were cleared: tmnxOamSysPerfLocalTestTx,
tmnxOamSysPerfRemoteTestRx, and tmnxOamSysPerfReqTypeTable. If the
statistics have not been cleared since the last CPM restart, zero is
returned.
A packet count which is time stamped by this object can be converted to
an average packets per second value using, for example,
pps = tmnxOamSysPerfLocalTestTx /
[(sysUpTime - tmnxOamSysPerfLastClearedTime)/100]. | ||||
| StmnxOamSysPerfLocalTestTx | 1.3.6.1.4.1.6527.3.1.2.11.5.2.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The value of tmnxOamSysPerfLocalTestTx indicates this node's total
number of echo request packets transmitted by locally initiated tests
(since the last clear - see TIMETRA-CLEAR-MIB::tmnxClearAction).
Packets sent by the following test types are counted:
1. Any OAM or SAA test created using TIMETRA-OAM-TEST-MIB, including
tests created using the following row status objects:
tmnxOamDiagCtlRowStatus
tmnxOamIfPingIfRowStatus
tmnxOamLTtraceAutoRowStatus
tmnxOamPingCtlRowStatus
tmnxOamTrCtlRowStatus
2. Any OAM-PM test created using TIMETRA-OAM-PM-MIB.
3. Background ICMP Bridged Residential Gateway ping test.
4. Filter redirect policy ping test.
5. SDP keep-alive.
6. Static Route CPE-Check ping test.
7. VRRP policy host unreachable ping test.
| ||||
| StmnxOamSysPerfRemoteTestRx | 1.3.6.1.4.1.6527.3.1.2.11.5.2.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The value of tmnxOamSysPerfRemoteTestRx indicates this node's total number of echo request packets received from remotely initiated tests (since the last clear).
| ||||
| TtmnxOamSysPerfReqTypeTable | 1.3.6.1.4.1.6527.3.1.2.11.5.2.7 | NA | ||
table · not-accessible · current tmnxOamSysPerfReqTypeTable has a row for each relevant OAM echo request packet type. Each row contains packet counters. | ||||
| RtmnxOamSysPerfReqTypeEntry | 1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1 | NA | ||
row · not-accessible · current Rows in tmnxOamSysPerfReqTypeTable are system-generated at CPM restart. Rows cannot be created or destroyed using SNMP. | ||||
| CtmnxOamSysPerfReqTypeName | 1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1.1 | TNamedItem | NA | |
column · TNamedItem · not-accessible · current The value of tmnxOamSysPerfReqTypeName specifies the name of an echo request packet type (e.g. 'ICMP'). The name is the index for the row. | ||||
| CtmnxOamSysPerfReqTypeLocalTestTx | 1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamSysPerfReqTypeLocalTestTx indicates the number of echo request packets transmitted by locally initiated tests (since the last clear) for the echo request packet type specified by tmnxOamSysPerfReqTypeName.
| ||||
| CtmnxOamSysPerfReqTypeRemoteTstRx | 1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamSysPerfReqTypeRemoteTstRx indicates the number of echo request packets received from remotely initiated tests (since the last clear) for the echo request packet type specified by tmnxOamSysPerfReqTypeName.
| ||||
| StmnxOamSysSessionLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.8 | Gauge32 | RO | obsolete |
scalar · Gauge32 · read-only · obsolete This object was marked obsolete in SROS Release 21.
Replacement objects:
TIMETRA-OAM-PM-MIB::tmnxOamPmStsTestLimit
TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTestLimit
TIMETRA-OAM-TEST-MIB::tmnxOamSysTestLimit.
| ||||
| StmnxOamSysSessionCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.9 | Gauge32 | RO | obsolete |
scalar · Gauge32 · read-only · obsolete This object was marked obsolete in SROS Release 21.
Replacement objects:
TIMETRA-OAM-PM-MIB::tmnxOamPmStsTestCount
TIMETRA-OAM-TEST-MIB::tmnxOamSysShareTestCount
TIMETRA-OAM-TEST-MIB::tmnxOamSysTestCount.
| ||||
| StmnxOamSysBgIcmpBrgSessionLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.10 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysBgIcmpBrgSessionLimit indicates the maximum number of background ICMP Bridged Residential Gateway (BRG) OAM test sessions available on this node. Sessions are allocated and freed as described in the tmnxOamSysBgIcmpBrgSessionCount DESCRIPTION clause.
| ||||
| StmnxOamSysBgIcmpBrgSessionCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.11 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysBgIcmpBrgSessionCount indicates the number of background ICMP Bridged Residential Gateway (BRG) OAM test sessions currently allocated on this node. One session is allocated when BRG functionality is administratively enabled on a group interface (using TIMETRA-SUBSCRIBER-MGMT-MIB:: tmnxSubBrgIfAdminState). The session is freed when the BRG functionality is administratively disabled. tmnxOamSysBgIcmpBrgSessionCount will not exceed tmnxOamSysBgIcmpBrgSessionLimit. Creating a background ICMP BRG OAM test session will fail when tmnxOamSysBgIcmpBrgSessionCount equals tmnxOamSysBgIcmpBrgSessionLimit.
| ||||
| StmnxOamSysLspSelfPingSessLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.12 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysLspSelfPingSessLimit indicates the maximum number of LSP Self Ping sessions available on this node. Sessions are allocated as described in the tmnxOamSysLspSelfPingSessCount DESCRIPTION clause.
| ||||
| StmnxOamSysLspSelfPingSessCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.13 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysLspSelfPingSessCount indicates the number of LSP Self Ping sessions currently allocated on this node. One session is allocated as required after LSP Self Ping is administratively enabled on an LSP (using TIMETRA-MPLS-MIB::vRtrMplsLspExtSelfPing). tmnxOamSysLspSelfPingSessCount will not exceed tmnxOamSysLspSelfPingSessLimit. Creating an LSP Self Ping session will fail when tmnxOamSysLspSelfPingSessCount equals tmnxOamSysLspSelfPingSessLimit.
| ||||
| StmnxOamSysPerfCfgLspSelfTxLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.14 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysPerfCfgLspSelfTxLimit indicates this node's upper bound on the total configured echo request packet transmission rate for LSP Self Pings. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate. Echo reply packets are not affected by this limit.
| ||||
| StmnxOamSysPerfCfgLspSelfTxTotal | 1.3.6.1.4.1.6527.3.1.2.11.5.2.15 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysPerfCfgLspSelfTxTotal indicates this node's current total configured echo request packet transmission rate for LSP Self Pings. An LSP Self Ping is started as required after LSP Self Ping is administratively enabled on an LSP (using TIMETRA-MPLS-MIB::vRtrMplsLspExtSelfPing). The value of tmnxOamSysPerfCfgLspSelfTxTotal will not exceed the value of tmnxOamSysPerfCfgLspSelfTxLimit.
| ||||
| StmnxOamSysBgIcmpIfCtlSessLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.16 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysBgIcmpIfCtlSessLimit indicates the maximum number of Background ICMP Interface Control sessions available on this node. Sessions are allocated as described in the tmnxOamSysBgIcmpIfCtlSessCount DESCRIPTION clause.
| ||||
| StmnxOamSysBgIcmpIfCtlSessCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.17 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysBgIcmpIfCtlSessCount indicates the number of Background ICMP Interface Control sessions currently allocated on this node. One session is allocated when Background ICMP Interface Control is configured on an interface (using tmnxOamIfPingIfRowStatus). tmnxOamSysBgIcmpIfCtlSessCount will not exceed tmnxOamSysBgIcmpIfCtlSessLimit. Creating an Background ICMP Interface Control session will fail when tmnxOamSysBgIcmpIfCtlSessCount equals tmnxOamSysBgIcmpIfCtlSessLimit.
| ||||
| StmnxOamSysTestLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.18 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysTestLimit indicates this node's maximum number of tests with the test types listed in tmnxOamSysTestCount.
| ||||
| StmnxOamSysTestCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.19 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysTestCount indicates this nodes's total number of tests with the following test types: 1. Filter redirect policy ping test. 2. SDP keep-alive. 3. VRRP policy host unreachable ping test. 4. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB. 5. Static route CPE-Check ping test. tmnxOamSysTestCount will not exceed tmnxOamSysTestLimit. Creating a test with one of the test types above will fail when tmnxOamSysTestCount equals tmnxOamSysTestLimit.
| ||||
| StmnxOamSysTxLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.20 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysTxLimit indicates this node's upper bound on the total configured echo request packet transmission rate for the test types listed in the tmnxOamSysTxTotal DESCRIPTION clause. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate. Echo reply packets are not affected by this limit.
| ||||
| StmnxOamSysTxTotal | 1.3.6.1.4.1.6527.3.1.2.11.5.2.21 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysTxTotal indicates this node's current total configured echo request packet transmission rate, for the following 'always on' test types: 1. Background ICMP Bridged Residential Gateway ping test. 2. Filter redirect policy ping test. 3. SDP keep-alive. 4. VRRP policy host unreachable ping test. 5. SAA continuous test (see tmnxOamSaaCtlContinuous). 6. Static route CPE-Check ping test. The value of tmnxOamSysTxTotal will not exceed the value of tmnxOamSysTxLimit.
| ||||
| StmnxOamSysShareTestLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.22 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysShareTestLimit indicates this node's maximum number of tests with the test types listed in tmnxOamSysShareTestCount.
| ||||
| StmnxOamSysShareTestCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.23 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysShareTestCount indicates this nodes's total number of tests with the following test types: 1. Filter redirect policy ping test. 2. SDP keep-alive. 3. Static Route CPE-Check ping test. 4. VRRP policy host unreachable ping test. 5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB. 6. Any test configured using TIMETRA-OAM-PM-MIB. tmnxOamSysShareTestCount will not exceed tmnxOamSysShareTestLimit. Creating a test with one of the test types above will fail when tmnxOamSysShareTestCount equals tmnxOamSysShareTestLimit.
| ||||
| StmnxOamSysShareTxLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.24 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysShareTxLimit indicates this node's upper bound on the total configured echo request packet transmission rate for the test types listed in the tmnxOamSysShareTxTotal DESCRIPTION clause. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate. Echo reply packets are not affected by this limit.
| ||||
| StmnxOamSysShareTxTotal | 1.3.6.1.4.1.6527.3.1.2.11.5.2.25 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysShareTxTotal indicates this node's current
total configured echo request packet transmission rate, for the
following 'always on' test types:
1. Background ICMP Bridged Residential Gateway ping test.
2. Filter redirect policy ping test.
3. SDP keep-alive.
4. Static Route CPE-Check ping test.
5. VRRP policy host unreachable ping test.
6. SAA continuous test (see tmnxOamSaaCtlContinuous).
7. OAM-PM proactive tests (e.g. a test created using
TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmRowStatus with
TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessType = 'proactive(1)').
The value of tmnxOamSysShareTxTotal will not exceed the value of
tmnxOamSysShareTxLimit.
| ||||
| StmnxOamSysCpeCheckStRtSessLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.26 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysCpeCheckStRtSessLimit indicates the maximum number of static route Customer Premises Equipment (CPE) Check sessions available on this node. Sessions are allocated as described in the tmnxOamSysCpeCheckStRtSessCount DESCRIPTION clause.
| ||||
| StmnxOamSysCpeCheckStRtSessCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.27 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysCpeCheckStRtSessCount indicates the number of static route Customer Premises Equipment (CPE) Check sessions currently allocated on this node. One session is allocated by setting TIMETRA-VRTR-MIB::vRtrInetStaticRouteCpeAddrType to a non-default value. tmnxOamSysCpeCheckStRtSessCount will not exceed tmnxOamSysCpeCheckStRtSessLimit. Creating a static route CPE-Check session will fail when tmnxOamSysCpeCheckStRtSessCount equals tmnxOamSysCpeCheckStRtSessLimit.
| ||||
| StmnxOamSysCfgCpeCheckStRtTxLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.28 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysCfgCpeCheckStRtTxLimit indicates this node's upper bound on the total configured echo request packet transmission rate for Customer Premises Equipment (CPE) Check pings on static routes. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate. Echo reply packets are not affected by this limit.
| ||||
| StmnxOamSysCfgCpeCheckStRtTxTotal | 1.3.6.1.4.1.6527.3.1.2.11.5.2.29 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysCfgCpeCheckStRtTxTotal indicates this node's current total configured echo request packet transmission rate for Customer Premises Equipment (CPE) Check pings on static routes. CPE Check pings on static routes are started by setting TIMETRA-VRTR-MIB::vRtrInetStaticRouteCpeAddrType to a non-default value. The value of tmnxOamSysCfgCpeCheckStRtTxTotal will not exceed the value of tmnxOamSysCfgCpeCheckStRtTxLimit.
| ||||
| StmnxOamBackgSharedTxLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.30 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamBackgSharedTxLimit indicates this node's upper bound on the total configured echo request packet transmission rate for the test types listed in the tmnxOamBackgSharedTxTotal DESCRIPTION clause. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate. Echo reply packets are not affected by this limit.
| ||||
| StmnxOamBackgSharedTxTotal | 1.3.6.1.4.1.6527.3.1.2.11.5.2.31 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamBackgSharedTxTotal indicates this node's current total configured echo request packet transmission rate, for the following 'always on' test types: 1. Background ICMP Bridged Residential Gateway ping test. 2. Filter redirect policy ping test. 3. SDP keep-alive. 4. VRRP policy host unreachable ping test. 5. SAA continuous test (see tmnxOamSaaCtlContinuous). 6. Static Route CPE-Check ping test. The value of tmnxOamBackgSharedTxTotal will not exceed the value of tmnxOamBackgSharedTxLimit.
| ||||
| StmnxOamSysCpeCheckStHstSessLimit | 1.3.6.1.4.1.6527.3.1.2.11.5.2.32 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysCpeCheckStHstSessLimit indicates the maximum number of static host Customer Premises Equipment (CPE) Check sessions available on this node. Sessions are allocated as described in the tmnxOamSysCpeCheckStHstSessCount DESCRIPTION clause.
| ||||
| StmnxOamSysCpeCheckStHstSessCount | 1.3.6.1.4.1.6527.3.1.2.11.5.2.33 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The value of tmnxOamSysCpeCheckStHstSessCount indicates the number of static host Customer Premises Equipment (CPE) Check sessions currently allocated on this node. One session is allocated by setting TIMETRA-SAP-MIB::tmnxSapMRtCpeChkRowStatus to 'createAndGo'. tmnxOamSysCpeCheckStHstSessCount will not exceed tmnxOamSysCpeCheckStHstSessLimit. Creating a static host CPE-Check session will fail when tmnxOamSysCpeCheckStHstSessCount equals tmnxOamSysCpeCheckStHstSessLimit.
| ||||
| StmnxOamMplsEchoDownstreamMapTlv | 1.3.6.1.4.1.6527.3.1.2.11.5.3 | TmnxOamMplsEchoDownMapTlv | RW | |
scalar · TmnxOamMplsEchoDownMapTlv · read-write · current The value of tmnxOamMplsEchoDownstreamMapTlv specifies the system value for the type of downstream map TLV to be inserted when launching MPLS echo requests. The value of tmnxOamMplsEchoDownstreamMapTlv is used on three occasions: 1. When a background LDP tree trace test is started (using tmnxOamLTtraceAutoAdminState), the value of tmnxOamMplsEchoDownstreamMapTlv specifies the type of downstream map TLV used during the test. 2. When a test of type 'lspTraceRoute' is created, with no value specified for the test's tmnxOamLspTrCtlDownstreamMapTlv object, tmnxOamLspTrCtlDownstreamMapTlv is set to the value of tmnxOamMplsEchoDownstreamMapTlv. 3. When a test of type 'ldpTreeTrace' is created, with no value specified for the test's tmnxOamLTtraceCtlDownstreamMpTlv object, tmnxOamLTtraceCtlDownstreamMpTlv is set to the value of tmnxOamMplsEchoDownstreamMapTlv. Example usage, for the second and third cases: suppose every node in this node's network supports the MPLS Echo Request/Reply DDMAP TLV, and the network operator wishes to use the enhanced functionality offered by the DDMAP TLV. Then, setting tmnxOamMplsEchoDownstreamMapTlv to 'ddmap(2)' simplifies configuration. The simplification: the tmnxOamLspTrCtlDownstreamMapTlv and tmnxOamLTtraceCtlDownstreamMpTlv objects need not be set when creating tests. | ||||
| StmnxOamICMPv6ErrorMsgLengthField | 1.3.6.1.4.1.6527.3.1.2.11.5.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current The value of tmnxOamICMPv6ErrorMsgLengthField specifies how to set the Length field when building an RFC 4884 ICMPv6 Destination Unreachable Message or an RFC 4884 ICMPv6 Time Exceeded Message. When tmnxOamICMPv6ErrorMsgLengthField='false', the Length field is set to zero. This setting provides less functionality, but may be required for backward compatibility. When tmnxOamICMPv6ErrorMsgLengthField='true', the Length field is set to the length of the response's Original Datagram field. When the originating node of an IPv6 'icmpTraceRoute(5)' test receives an ICMPv6 response with the Length field set to a non-zero value, it can find more information in the response, and can therefore generate more results for the test. See tmnxOamICMPv6ErrorMsgMaxOrigData and tmnxOamIcmpTrOrDgHdrTable for related information. | ||||
| StmnxOamICMPv6ErrorMsgMaxOrigData | 1.3.6.1.4.1.6527.3.1.2.11.5.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current The value of tmnxOamICMPv6ErrorMsgMaxOrigData specifies the amount of information to copy from the request packet when building an RFC 4884 ICMPv6 Destination Unreachable Message or an RFC 4884 ICMPv6 Time Exceeded Message. When tmnxOamICMPv6ErrorMsgMaxOrigData='true', the Original Datagram field of the ICMPv6 Message built is made as large as possible (while ensuring the Message does not need to be fragmented). This setting provides as much information as possible to the originator of an IPv6 'icmpTraceRoute' test. When tmnxOamICMPv6ErrorMsgMaxOrigData='false', the Original Datagram field of the ICMPv6 Message built may be smaller. This setting provides less functionality, but may be required for backward compatibility. See tmnxOamICMPv6ErrorMsgLengthField and tmnxOamIcmpTrOrDgHdrTable for related information. | ||||
| NtmnxOamDiagObjs | 1.3.6.1.4.1.6527.3.1.2.11.6 | |||
| TtmnxOamDiagCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.1 | NA | ||
table · not-accessible · current tmnxOamDiagCtlTable contains configuration information for diagnostic tests. tmnxOamPingCtlTable and tmnxOamTrCtlTable fill the same role for ping tests and trace route tests, respectively. | ||||
| RtmnxOamDiagCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.1.1 | NA | ||
row · not-accessible · current tmnxOamDiagCtlEntry contains configuration information for one diagnostic test. Rows are created/destroyed using tmnxOamDiagCtlRowStatus. | ||||
| CtmnxOamDiagCtlOwnerIndex | 1.3.6.1.4.1.6527.3.1.2.11.6.1.1.1 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamDiagCtlOwnerIndex specifies the owner name of the test. | ||||
| CtmnxOamDiagCtlTestIndex | 1.3.6.1.4.1.6527.3.1.2.11.6.1.1.2 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The value of tmnxOamDiagCtlTestIndex specifies the test name of the test. The test is identified by the owner name and the test name. One owner typically owns several tests. This indexing method ensures tests created by several owners have unique indices. | ||||
| CtmnxOamDiagCtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.6.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamDiagCtlRowStatus specifies the row status of the specified test. | ||||
| CtmnxOamDiagCtlLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.1.1.4 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamDiagCtlLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamDiagCtlTestMode | 1.3.6.1.4.1.6527.3.1.2.11.6.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamDiagCtlTestMode specifies the type of OAM
diagnostic test defined by this row.
Code Points
------------------------------------------------------------------
none - the test type is unspecified
findEgressDiag - find the egress port, etc, for a user-configured
packet
The support for Service Assurance Agent (SAA) tests (i.e. tests with
tmnxOamSaaCtlTable rows) and OAM tests (i.e. tests without
tmnxOamSaaCtlTable rows) varies with the test type, as shown in the
following table.
tmnxOamDiagCtlTestMode SAA Supported OAM Supported
---------------------- ------------- -------------
'findEgressDiag' No Yes
| ||||
| CtmnxOamDiagCtlAdminState | 1.3.6.1.4.1.6527.3.1.2.11.6.1.1.6 | TmnxEnabledDisabled | RC | |
column · TmnxEnabledDisabled · read-create · current The value of tmnxOamDiagCtlAdminState specifies the administrative state of the test. Setting this object to 'enabled(1)' starts the test. When the test completes, SROS sets this object to 'disabled(2)'. | ||||
| TtmnxOamFindEgrDiagCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.2 | NA | ||
table · not-accessible · current tmnxOamFindEgrDiagCtlTable contains configuration information for diagnostic tests with type 'findEgressDiag(1)'. | ||||
| RtmnxOamFindEgrDiagCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.2.1 | NA | ||
row · not-accessible · current tmnxOamFindEgrDiagCtlEntry contains configuration information for one diagnostic test with type 'findEgressDiag(1)'. A row is created when tmnxOamDiagCtlTestMode is set to 'findEgressDiag(1)'. A row is destroyed when the corresponding tmnxOamDiagCtlTable row is destroyed. | ||||
| CtmnxOamFindEgrDiagCtlLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.2.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamFindEgrDiagCtlLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamFindEgrDiagCtlPacketNum | 1.3.6.1.4.1.6527.3.1.2.11.6.2.1.2 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The value of tmnxOamFindEgrDiagCtlPacketNum specifies the packet number to be used for the test. Zero specifies no packet has been configured. The test will fail if the packet number is not defined in tmnxOamBuildPktCtlTable. | ||||
| CtmnxOamFindEgrDiagCtlIngPortId | 1.3.6.1.4.1.6527.3.1.2.11.6.2.1.3 | TmnxPortID | RW | |
column · TmnxPortID · read-write · current The value of tmnxOamFindEgrDiagCtlIngPortId specifies the ingress port to be used for the test. The null port identifier 0x1e000000 specifies no port has been configured. The test will fail if the port identifier is not defined in TIMETRA-PORT-MIB::tmnxPortTable. The test will fail if the port identifier does not identify a physical port. For example, the test will fail if the port identifier identifies a Link Aggregation Group (LAG). | ||||
| TtmnxOamFindEgrDiagResultsTable | 1.3.6.1.4.1.6527.3.1.2.11.6.3 | NA | ||
table · not-accessible · current tmnxOamFindEgrDiagResultsTable contains test results for the OAM Egress Finder. | ||||
| RtmnxOamFindEgrDiagResultsEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1 | NA | ||
row · not-accessible · current tmnxOamFindEgrDiagResultsEntry contains the test results for one OAM diagnostic test with tmnxOamDiagCtlTestMode = 'findEgressDiag(1)'. A row is created when a 'findEgressDiag(1)' test is enabled (using tmnxOamDiagCtlAdminState). A row is destroyed when: 1. The corresponding test configuration is destroyed (using tmnxOamDiagCtlRowStatus), or 2. Results are cleared for the test (using TIMETRA-CLEAR-MIB::tmnxClearAction), or 3. A new run result is available, and the limit on the number of run results retained (3, currently) has been reached. In that case, the oldest run result row is destroyed. tmnxOamFindEgrDiagResultType indicates which results objects are applicable for the specified test run. | ||||
| CtmnxOamDiagResultsTestRunIndex | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamDiagResultsTestRunIndex specifies the test run number for this row. The first run of a test (as identified by tmnxOamDiagCtlOwnerIndex and tmnxOamDiagCtlTestIndex) is assigned run index 1. Subsequent run index values are assigned sequentially. | ||||
| CtmnxOamFindEgrDiagOperState | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.2 | TmnxEnabledDisabled | RO | |
column · TmnxEnabledDisabled · read-only · current The value of tmnxOamFindEgrDiagOperState indicates the operational state of the test. 'enabled(1)' indicates the test is running. | ||||
| CtmnxOamFindEgrDiagEgressPort | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.3 | TmnxPortID | RO | |
column · TmnxPortID · read-only · current The value of tmnxOamFindEgrDiagEgressPort indicates the egress port selected by SROS for the specified test run. The NULL port identifier (i.e. 0x1E000000) is returned when no port is available. | ||||
| CtmnxOamFindEgrDiagEgrRtrInstName | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.4 | TLNamedItemOrEmpty | RO | |
column · TLNamedItemOrEmpty · read-only · current The value of tmnxOamFindEgrDiagEgrRtrInstName indicates the name of
the egress service or egress router instance selected by SROS for the
specified test run.
SROS provides one of the following values:
1. '' (i.e. the empty string),
2. 'Base',
3. A VPRN service name (i.e. a TIMETRA-SERV-MIB::svcName, with
TIMETRA-SERV-MIB::svcType = 'vprn(4)').
The empty string is returned when no router instance is available. | ||||
| CtmnxOamFindEgrDiagEgressIfName | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.5 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tmnxOamFindEgrDiagEgressIfName indicates the egress interface name selected by SROS for the specified test run. tmnxOamFindEgrDiagEgrRtrInstName and tmnxOamFindEgrDiagEgressIfName uniquely identify an interface. The empty string is returned when no interface name is available. | ||||
| CtmnxOamFindEgrDiagNextHopAddrTyp | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.6 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamFindEgrDiagNextHopAddrTyp indicates the address type of tmnxOamFindEgrDiagNextHopAddress. 'unknown(0)' is returned when no next hop address is available. | ||||
| CtmnxOamFindEgrDiagNextHopAddress | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.7 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamFindEgrDiagNextHopAddress indicates the next hop address selected by SROS for the specified test run. | ||||
| CtmnxOamFindEgrDiagResultType | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamFindEgrDiagResultType indicates the type of the
result of the test run.
'port(2)' indicates the principal result of the test run is the
specified packet's egress port.
'vplsSap(3)' indicates the principal result of the test run is the
specified packet's egress VPLS SAP.
The results objects applicable to a test run vary with the result
type, as follows.
tmnxOamFindEgrDiagResultType Applicable Results Objects
---------------------------- --------------------------------
'port(2)' tmnxOamFindEgrDiagEgrRtrInstName
tmnxOamFindEgrDiagEgressIfName
tmnxOamFindEgrDiagEgressPort
tmnxOamFindEgrDiagNextHopAddrTyp
tmnxOamFindEgrDiagNextHopAddress
tmnxOamFindEgrDiagOperState
tmnxOamFindEgrDiagResultType
'vplsSap(3)' tmnxOamFindEgrDiagEgrSapEncapVal
tmnxOamFindEgrDiagEgrSapPort
tmnxOamFindEgrDiagEgrServiceId
tmnxOamFindEgrDiagEgressPort
tmnxOamFindEgrDiagNextHopMAC
tmnxOamFindEgrDiagOperState
tmnxOamFindEgrDiagResultType
| ||||
| CtmnxOamFindEgrDiagEgrSapPort | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.9 | TmnxPortID | RO | |
column · TmnxPortID · read-only · current The value of tmnxOamFindEgrDiagEgrSapPort indicates the port component of the egress SAP result of the specified test run. The NULL port identifier (i.e. 0x1E000000) is returned when no SAP is available. tmnxOamFindEgrDiagEgrSapEncapVal is the other component of the SAP. | ||||
| CtmnxOamFindEgrDiagEgrSapEncapVal | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.10 | TmnxEncapVal | RO | |
column · TmnxEncapVal · read-only · current The value of tmnxOamFindEgrDiagEgrSapEncapVal indicates the encapsulation component of the egress SAP result of the specified test run. Zero is returned when no SAP is available. tmnxOamFindEgrDiagEgrSapPort is the other component of the SAP. | ||||
| CtmnxOamFindEgrDiagEgrServiceId | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.11 | TmnxServId | RO | |
column · TmnxServId · read-only · current The value of tmnxOamFindEgrDiagEgrServiceId indicates the identifier of the service (e.g. a VPLS) hosting the egress SAP found by the specified test run. Zero is returned when no service identifier is available. | ||||
| CtmnxOamFindEgrDiagNextHopMAC | 1.3.6.1.4.1.6527.3.1.2.11.6.3.1.12 | MacAddress | RO | |
column · MacAddress · read-only · current The value of tmnxOamFindEgrDiagNextHopMAC indicates the MAC address of the next hop of the egress SAP found by the specified test run. The all-zero MAC address is returned when no MAC address is available. | ||||
| TtmnxOamBuildPktCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.4 | NA | ||
table · not-accessible · current tmnxOamBuildPktCtlTable contains the definition of all the packets used by the OAM Egress Finder. The OAM Egress Finder computes the egress routing (e.g. the egress port) used by a packet sent with a configured set of packet headers (e.g. an Ethernet header, an IPv4 header, and a UDP header). The finder is particularly useful when the egress port is a member of a Link Aggregation Group (LAG) or part of an Equal-Cost Multi-Path routing (ECMP) configuration. In the ECMP and LAG cases, SROS chooses the egress port for a packet using a hash calculation on the packet headers, making a tool useful for computing the egress routing. | ||||
| RtmnxOamBuildPktCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.4.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktCtlEntry contains the definition of one packet used by the OAM Egress Finder. Rows are created and destroyed using tmnxOamBuildPktRowStatus.
| ||||
| CtmnxOamBuildPktNum | 1.3.6.1.4.1.6527.3.1.2.11.6.4.1.1 | Unsigned32 (1..65535) | NA | |
column · Unsigned32 (1..65535) · not-accessible · current The value of tmnxOamBuildPktNum specifies the packet number of the row to be configured. | ||||
| CtmnxOamBuildPktRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.6.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamBuildPktRowStatus specifies the row status of the specified packet. | ||||
| CtmnxOamBuildPktLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.4.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktHeaderSeq | 1.3.6.1.4.1.6527.3.1.2.11.6.4.1.4 | DisplayString (SIZE (0..153)) | RC | |
column · DisplayString (SIZE (0..153)) · read-create · current The value of tmnxOamBuildPktHeaderSeq specifies the sequence of packet headers that make up the specified packet. The sequence is defined using an ASCII string. Packet headers are defined in tmnxOamBuildPktHdrCtlTable. For example, suppose tmnxOamBuildPktHdrCtlTable contains the following values. tmnxOamBuildPktHeaderNum tmnxOamBuildPktHdrType ------------------------ ---------------------- 7 'ethernet' 99 'ipv4' 255 'udp' Then, the header sequence string 'h7/h99/h255' specifies a packet with a UDP PDU within an IPv4 PDU within an Ethernet frame. A header sequence can refer to at most 22 headers. | ||||
| TtmnxOamBuildPktHdrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.5 | NA | ||
table · not-accessible · current tmnxOamBuildPktHdrCtlTable contains the header type of all the configured packet headers used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktHdrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.5.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktHdrCtlEntry contains the header type (e.g. 'dot1q') of one configured header used by the OAM Egress Finder. Rows are created and destroyed using tmnxOamBuildPktHdrRowStatus. | ||||
| CtmnxOamBuildPktHeaderNum | 1.3.6.1.4.1.6527.3.1.2.11.6.5.1.1 | Unsigned32 (1..65535) | NA | |
column · Unsigned32 (1..65535) · not-accessible · current The value of tmnxOamBuildPktHeaderNum specifies the header number of the row to be configured. | ||||
| CtmnxOamBuildPktHdrRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.6.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamBuildPktHdrRowStatus specifies the row status of the specified header. | ||||
| CtmnxOamBuildPktHdrLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.5.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktHdrLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktHdrType | 1.3.6.1.4.1.6527.3.1.2.11.6.5.1.4 | TmnxOamBuildPktHeaderType | RC | |
column · TmnxOamBuildPktHeaderType · read-create · current The value of tmnxOamBuildPktHdrType specifies the type of the specified packet header. | ||||
| TtmnxOamBuildPktHdrOvrCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.6 | NA | ||
table · not-accessible · current tmnxOamBuildPktHdrOvrCtlTable contains the set of packet header overrides for the OAM Egress Finder. | ||||
| RtmnxOamBuildPktHdrOvrCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.6.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktHdrOvrCtlEntry contains the definition of one packet header override used by the OAM Egress Finder. Rows are created and destroyed using tmnxOamBuildPktHdrOvrRowStatus. | ||||
| CtmnxOamBuildPktHdrOvrRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.6.6.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamBuildPktHdrOvrRowStatus specifies the row status of the specified packet header override. | ||||
| CtmnxOamBuildPktHdrOvrLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.6.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktHdrOvrLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| TtmnxOamBuildPktEthCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.7 | NA | ||
table · not-accessible · current tmnxOamBuildPktEthCtlTable contains the values of Ethernet header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktEthCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.7.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktEthCtlEntry contains the definition of one Ethernet
header used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing an
Ethernet header (e.g. Source MAC) are present. The other Ethernet
header fields (e.g. Frame Check Sequence) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'ethernet', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with
type 'ethernet'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'ethernet' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'ethernet' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the Ethernet header is
a base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base Source MAC field for header 1, and two overrides.
Pkt Num Or Zero Header Num Src MAC Addr
--------------- ---------- -----------------
0 1 00:11:22:33:44:55
10 1 00:12:34:56:78:9a
255 1 00:AA:BB:CC:DD:EE | ||||
| CtmnxOamBuildPktNumOrZero | 1.3.6.1.4.1.6527.3.1.2.11.6.7.1.1 | Unsigned32 (0..65535) | NA | |
column · Unsigned32 (0..65535) · not-accessible · current The value of tmnxOamBuildPktNumOrZero specifies the packet number of the row to be configured. A zero specifies a row for a base header definition. A non-zero value specifies a row for an override header definition. When building a packet to be tested, a matching override definition (if any) is used instead of a base definition. | ||||
| CtmnxOamBuildPktEthLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.7.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktEthLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktEthDstMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.6.7.1.3 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamBuildPktEthDstMacAddr specifies the Destination MAC Address field of the specified Ethernet header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 00:00:00:00:00:00. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is FF:FF:FF:FF:FF:FF. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktEthSrcMacAddr | 1.3.6.1.4.1.6527.3.1.2.11.6.7.1.4 | MacAddress | RW | |
column · MacAddress · read-write · current The value of tmnxOamBuildPktEthSrcMacAddr specifies the Source MAC Address field of the specified Ethernet header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 00:00:00:00:00:00. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is FF:FF:FF:FF:FF:FF. That indicates an unspecified override. | ||||
| TtmnxOamBuildPktIpCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.8 | NA | ||
table · not-accessible · current tmnxOamBuildPktIpCtlTable contains the values of IP header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktIpCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktIpCtlEntry contains the definition of one IP header
used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing
an IP header (e.g. Source IP Address) are present. The other IP
header fields (e.g. Time to Live) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'ipv4'|'ipv6', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with
type 'ipv4'|'ipv6'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'ipv4'|'ipv6' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'ipv4'|'ipv6' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the IP header is
a base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base Source IP Address field for header 1, and two overrides.
Pkt Num Or Zero Header Num Source IP Address
--------------- ---------- -----------------
0 1 1::2
10 1 2::3
255 1 3::4 | ||||
| CtmnxOamBuildPktIpLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktIpLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktIpDstIpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1.2 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamBuildPktIpDstIpAddrType specifies the address type of tmnxOamBuildPktIpDstIpAddress. | ||||
| CtmnxOamBuildPktIpDstIpAddress | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1.3 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamBuildPktIpDstIpAddress specifies the Destination IP Address field of the specified IP header. The default value varies, as follows. 1. If the hosting row is a header definition (i.e. tmnxOamBuildPktNumOrZero is zero): a) if the parent tmnxOamBuildPktHdrType is 'ipv4', the default is the 'ipv4(1)' address 0.0.0.0. b) if the parent tmnxOamBuildPktHdrType is 'ipv6', the default is the 'ipv6(2)' address 0::0. 2. If the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default is the 'unknown(0)' address. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktIpSrcIpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1.4 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tmnxOamBuildPktIpSrcIpAddrType specifies the address type of tmnxOamBuildPktIpSrcIpAddress. | ||||
| CtmnxOamBuildPktIpSrcIpAddress | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1.5 | InetAddress (SIZE (0 | 4 | 16)) | RW | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-write · current The value of tmnxOamBuildPktIpSrcIpAddress specifies the Source IP Address field of the specified IP header. The default value varies, as follows. 1. If the hosting row is a header definition (i.e. tmnxOamBuildPktNumOrZero is zero): a) if the parent tmnxOamBuildPktHdrType is 'ipv4', the default is the 'ipv4(1)' address 0.0.0.0. b) if the parent tmnxOamBuildPktHdrType is 'ipv6', the default is the 'ipv6(2)' address 0::0. 2. If the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default is the 'unknown(0)' address. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktIpDscp | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1.6 | TDSCPNameOrEmpty | RW | |
column · TDSCPNameOrEmpty · read-write · current The value of tmnxOamBuildPktIpDscp specifies the Differentiated Services Code Point (DSCP) field of the specified IP header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 'be'. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is ''. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktIPv4MoreFragments | 1.3.6.1.4.1.6527.3.1.2.11.6.8.1.7 | Integer32 (-1 | 0..1) | RW | |
column · Integer32 (-1 | 0..1) · read-write · current The value of tmnxOamBuildPktIPv4MoreFragments specifies the More Fragments (MF) flag for the specified IPv4 header. If the header type is IPv6, this object is irrelevant and cannot be changed away from default. An IPv6 Fragment Header (i.e. tmnxOamBuildPktHdrType = 'ipv6Fragment') is used to configure fragmentation for an IPv6 packet. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| TtmnxOamBuildPktTcpUdpCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.9 | NA | ||
table · not-accessible · current tmnxOamBuildPktTcpUdpCtlTable contains the values of TCP|UDP header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktTcpUdpCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.9.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktTcpUdpCtlEntry contains the definition of one TCP|UDP
header used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing a
TCP|UDP header (e.g. Source Port) are present. The other TCP|UDP
header fields (e.g. Checksum) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'tcp'|'udp', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with type
'tcp'|'udp'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'tcp'|'udp' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'tcp'|'udp' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the TCP|UDP header is
a base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base Source Port field for header 1, and two overrides.
Pkt Num Or Zero Header Num Source Port
--------------- ---------- -----------
0 1 65532
10 1 65533
255 1 65534 | ||||
| CtmnxOamBuildPktTcpUdpLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.9.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktTcpUdpLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktTcpUdpDstPort | 1.3.6.1.4.1.6527.3.1.2.11.6.9.1.2 | Integer32 (-1 | 0..65535) | RW | |
column · Integer32 (-1 | 0..65535) · read-write · current The value of tmnxOamBuildPktTcpUdpDstPort specifies the TCP|UDP Destination Port field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktTcpUdpSrcPort | 1.3.6.1.4.1.6527.3.1.2.11.6.9.1.3 | Integer32 (-1 | 0..65535) | RW | |
column · Integer32 (-1 | 0..65535) · read-write · current The value of tmnxOamBuildPktTcpUdpSrcPort specifies the TCP|UDP Source Port field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| TtmnxOamBuildPktDot1qCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.10 | NA | ||
table · not-accessible · current tmnxOamBuildPktDot1qCtlTable contains the values of IEEE 802.1Q header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktDot1qCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.10.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktDot1qCtlEntry contains the definition of one IEEE
802.1Q header used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing an
IEEE 802.1Q header (e.g. VLAN ID) are present. The other IEEE 802.1Q
header fields (e.g. Drop Eligible Indicator (DEI)) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'dot1q', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with
type 'dot1q'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'dot1q' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'dot1q' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the IEEE 802.1Q header
is a base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base VLAN ID field for header 1, and two overrides.
Pkt Num Or Zero Header Num VLAN ID
--------------- ---------- -------
0 1 4092
10 1 4093
255 1 4094 | ||||
| CtmnxOamBuildPktDot1qLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.10.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktDot1qLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktDot1qPrioCodePt | 1.3.6.1.4.1.6527.3.1.2.11.6.10.1.2 | Integer32 (-1 | 0..7) | RW | |
column · Integer32 (-1 | 0..7) · read-write · current The value of tmnxOamBuildPktDot1qPrioCodePt specifies the IEEE 802.1Q Priority Code Point field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktDot1qTagProtoId | 1.3.6.1.4.1.6527.3.1.2.11.6.10.1.3 | Integer32 (-1 | 1536..65535) | RW | |
column · Integer32 (-1 | 1536..65535) · read-write · current The value of tmnxOamBuildPktDot1qTagProtoId specifies the IEEE 802.1Q Tag Protocol Identifier (TPID) field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0x8100 (i.e. 33024 decimal). When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktDot1qVlanId | 1.3.6.1.4.1.6527.3.1.2.11.6.10.1.4 | Integer32 (-1 | 0..4095) | RW | |
column · Integer32 (-1 | 0..4095) · read-write · current The value of tmnxOamBuildPktDot1qVlanId specifies the IEEE 802.1Q VLAN Identifier field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| TtmnxOamBuildPktIPsecAuthCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.11 | NA | ||
table · not-accessible · current tmnxOamBuildPktIPsecAuthCtlTable contains the values of IPsec Authentication Header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktIPsecAuthCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.11.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktIPsecAuthCtlEntry contains the definition of one IPsec
Authentication Header used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing an
IPsec Authentication Header (e.g. Security Parameters Index (SPI)) are
present. The other IPsec Authentication Header fields (e.g. Sequence
Number) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'ipsecAuth', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with type
'ipsecAuth'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'ipsecAuth' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'ipsecAuth' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the IPsec
Authentication Header is a base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base SPI field for header 1, and two overrides.
Pkt Num Or Zero Header Num SPI
--------------- ---------- ----------
0 1 4123456789
10 1 4123456790
255 1 4123456791 | ||||
| CtmnxOamBuildPktIPsecAuthLastChgd | 1.3.6.1.4.1.6527.3.1.2.11.6.11.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktIPsecAuthLastChgd indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktIPsecAuthSecPrIdx | 1.3.6.1.4.1.6527.3.1.2.11.6.11.1.2 | Unsigned32 (0 | 1..4294967295) | RW | |
column · Unsigned32 (0 | 1..4294967295) · read-write · current The value of tmnxOamBuildPktIPsecAuthSecPrIdx specifies the IPsec Authentication Security Parameters Index (SPI) field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 1. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is 0. That indicates an unspecified override. Zero is an unsupported value in an IPsec Authentication Header SPI field. | ||||
| TtmnxOamBuildPktPbbCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.12 | NA | ||
table · not-accessible · current tmnxOamBuildPktPbbCtlTable contains the values of Provider Backbone (PBB) header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktPbbCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.12.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktPbbCtlEntry contains the definition of one PBB header
used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing a PBB
header (e.g. Backbone Service Instance Identifier (I-SID)) are
present. The other PBB header fields (e.g. Priority Code Point
(I-PCP)) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'pbb', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with type
'pbb'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'pbb' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'pbb' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the PBB header is a
base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base I-SID field for header 1, and two overrides.
Pkt Num Or Zero Header Num I-SID
--------------- ---------- --------
0 1 16777213
10 1 16777214
255 1 16777215 | ||||
| CtmnxOamBuildPktPbbLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.12.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktPbbLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktPbbIsid | 1.3.6.1.4.1.6527.3.1.2.11.6.12.1.2 | Integer32 (-1 | 0..16777215) | RW | |
column · Integer32 (-1 | 0..16777215) · read-write · current The value of tmnxOamBuildPktPbbIsid specifies the PBB Backbone Service Instance Identifier (I-SID) field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktPbbTagProtocolId | 1.3.6.1.4.1.6527.3.1.2.11.6.12.1.3 | Integer32 (-1 | 1536..65535) | RW | |
column · Integer32 (-1 | 1536..65535) · read-write · current The value of tmnxOamBuildPktPbbTagProtocolId specifies the PBB Tag Protocol Identifier (TPID) field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0x88E7 (i.e. 35047 decimal). When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| TtmnxOamBuildPktL2tpCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.13 | NA | ||
table · not-accessible · current tmnxOamBuildPktL2tpCtlTable contains the values of Layer 2 Tunneling Protocol (L2TP) header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktL2tpCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.13.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktL2tpCtlEntry contains the definition of one L2TP header
used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing an
L2TP header (e.g. Tunnel ID) are present. The other L2TP header fields
(e.g. Version) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'l2tp', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with type
'l2tp'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'l2tp' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'l2tp' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the L2TP header is a
base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base Tunnel ID field for header 1, and two overrides.
Pkt Num Or Zero Header Num Tunnel ID
--------------- ---------- ---------
0 1 65533
10 1 65534
255 1 65535 | ||||
| CtmnxOamBuildPktL2tpLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.13.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktL2tpLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktL2tpSessionId | 1.3.6.1.4.1.6527.3.1.2.11.6.13.1.2 | Integer32 (-1 | 0..65535) | RW | |
column · Integer32 (-1 | 0..65535) · read-write · current The value of tmnxOamBuildPktL2tpSessionId specifies the L2TP Session ID field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktL2tpTunnelId | 1.3.6.1.4.1.6527.3.1.2.11.6.13.1.3 | Integer32 (-1 | 0..65535) | RW | |
column · Integer32 (-1 | 0..65535) · read-write · current The value of tmnxOamBuildPktL2tpTunnelId specifies the L2TP Tunnel ID field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| TtmnxOamBuildPktMplsCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.14 | NA | ||
table · not-accessible · current tmnxOamBuildPktMplsCtlTable contains the values of MPLS header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktMplsCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.14.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktMplsCtlEntry contains the definition of one MPLS header
used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing an
MPLS header (e.g. MPLS Label) are present. The other MPLS header
fields (e.g. Bottom of Stack) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'mpls', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with
type 'mpls'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'mpls' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'mpls' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the MPLS header
is a base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base MPLS Label field for header 1, and two overrides.
Pkt Num Or Zero Header Num MPLS Label
--------------- ---------- ----------
0 1 1048573
10 1 1048574
255 1 1048575 | ||||
| CtmnxOamBuildPktMplsLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.6.14.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktMplsLastChanged indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktMplsLabel | 1.3.6.1.4.1.6527.3.1.2.11.6.14.1.2 | Integer32 (-1 | 0..1048575) | RW | |
column · Integer32 (-1 | 0..1048575) · read-write · current The value of tmnxOamBuildPktMplsLabel specifies the MPLS Label field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| CtmnxOamBuildPktMplsTrafficClass | 1.3.6.1.4.1.6527.3.1.2.11.6.14.1.3 | Integer32 (-1 | 0..7) | RW | |
column · Integer32 (-1 | 0..7) · read-write · current The value of tmnxOamBuildPktMplsTrafficClass specifies the MPLS Traffic Class field of the specified header. When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default value is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default value is -1. That indicates an unspecified override. | ||||
| TtmnxOamBuildPktGtpUserCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.6.15 | NA | ||
table · not-accessible · current tmnxOamBuildPktGtpUserCtlTable contains the values of GTP User (GTP-U) version 1 header fields used by the OAM Egress Finder. | ||||
| RtmnxOamBuildPktGtpUserCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.6.15.1 | NA | ||
row · not-accessible · current tmnxOamBuildPktGtpUserCtlEntry contains the definition of one GTP-U
header used by the OAM Egress Finder.
Fields that influence the routing by SROS of a packet containing a
GTP-U header (e.g. Tunnel Endpoint Identifier (TEID)) are present. The
other GTP-U header fields (e.g. Message Type) are absent.
A row is created by SROS when:
1. tmnxOamBuildPktHdrType is set to 'gtpUser', OR
2. A tmnxOamBuildPktHdrOvrCtlTable table row is created with a
tmnxOamBuildPktHeaderNum index which refers to a header with type
'gtpUser'.
A row is destroyed by SROS when:
1. A tmnxOamBuildPktHdrCtlTable row with tmnxOamBuildPktHdrType =
'gtpUser' is destroyed, OR
2. A tmnxOamBuildPktHdrOvrCtlTable row which refers to a header with
type 'gtpUser' is destroyed.
A row created using creation clause 1, above, has the index object
tmnxOamBuildPktNumOrZero=0. The zero indicates the GTP-U Header is a
base definition (not an override).
A row created using creation clause 2, above, has
tmnxOamBuildPktNumOrZero set to the tmnxOamBuildPktNum index of the
parent tmnxOamBuildPktHdrOvrCtlTable row.
The following example values for this table show the definition of a
base TEID field for header 1, and two overrides.
Pkt Num Or Zero Header Num TEID
--------------- ---------- ----------
0 1 4123456789
10 1 4123456790
255 1 4123456791 | ||||
| CtmnxOamBuildPktGtpUserLastChgd | 1.3.6.1.4.1.6527.3.1.2.11.6.15.1.1 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamBuildPktGtpUserLastChgd indicates the most recent time the value of a writable object in this row was modified. | ||||
| CtmnxOamBuildPktGtpUserTunnEpIdHi | 1.3.6.1.4.1.6527.3.1.2.11.6.15.1.2 | TmnxHigh32 (0 | 1) | RW | |
column · TmnxHigh32 (0 | 1) · read-write · current The value of tmnxOamBuildPktGtpUserTunnEpIdHi specifies the most significant 32 bits of the GTP-U Tunnel Endpoint Identifier (TEID) field of the specified header. Together, tmnxOamBuildPktGtpUserTunnEpIdHi and tmnxOamBuildPktGtpUserTunnEpIdLo specify a number in the range 0..4294967296 (i.e. 2^32). When the hosting row is a base definition (i.e. tmnxOamBuildPktNumOrZero is zero), the default TEID is 0. When the hosting row is an override definition (i.e. tmnxOamBuildPktNumOrZero is non-zero), the default TEID is 4294967296. That indicates an unspecified override. The TEID High/Low object pair is needed to accommodate 4294967296. | ||||
| CtmnxOamBuildPktGtpUserTunnEpIdLo | 1.3.6.1.4.1.6527.3.1.2.11.6.15.1.3 | TmnxLow32 | RW | |
column · TmnxLow32 · read-write · current The value of tmnxOamBuildPktGtpUserTunnEpIdLo specifies the least significant 32 bits of the GTP-U Tunnel Endpoint Identifier (TEID) field of the specified header. See the DESCRIPTION clause of tmnxOamBuildPktGtpUserTunnEpIdHi for more information. | ||||
| NtmnxOamNotificationObjs | 1.3.6.1.4.1.6527.3.1.2.11.7 | |||
| StmnxOamTestRunIndex | 1.3.6.1.4.1.6527.3.1.2.11.7.1 | Unsigned32 (1..4294967295) | AN | |
scalar · Unsigned32 (1..4294967295) · accessible-for-notify · current The value of tmnxOamTestRunIndex indicates a test run index (e.g. tmnxOamPingResultsTestRunIndex or tmnxOamDiagResultsTestRunIndex) reported in a notification. | ||||
| NtmnxOamIfPingObjs | 1.3.6.1.4.1.6527.3.1.2.11.8 | |||
| TtmnxOamIfPingTmplCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.8.1 | NA | ||
table · not-accessible · current The tmnxOamIfPingTmplCtlTable has an entry for each ping template controlling the operational status of an IP interface. This is achieved by using ICMP. | ||||
| RtmnxOamIfPingTmplCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1 | NA | ||
row · not-accessible · current Each row entry represents a ping template. Entries can be created and deleted via SNMP SET operations on the object tmnxOamIfPingTmplCtlRowStatus. | ||||
| CtmnxOamIfPingTmplCtlName | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.1 | TLNamedItem | NA | |
column · TLNamedItem · not-accessible · current The value of tmnxOamIfPingTmplCtlName specifies the name of the template. | ||||
| CtmnxOamIfPingTmplCtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamIfPingTmplCtlRowStatus specifies the creation and deletion of rows in this table. Note that a template can not be destroyed if it is referenced by an interface (i.e. tmnxOamIfPingIfTemplate) | ||||
| CtmnxOamIfPingTmplCtlLastMgmtChg | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamIfPingTmplCtlLastMgmtChg indicates the sysUpTime at the time of the most recent management-initiated change to this table row. | ||||
| CtmnxOamIfPingTmplCtlDescription | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.4 | TItemDescription | RC | |
column · TItemDescription · read-create · current The value of tmnxOamIfPingTmplCtlDescription specifies the description of the template. | ||||
| CtmnxOamIfPingTmplCtlDscp | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.5 | TDSCPName | RC | |
column · TDSCPName · read-create · current The value of tmnxOamIfPingTmplCtlDscp specifies the DSCP to be carried in IP header of the ICMP echo request. | ||||
| CtmnxOamIfPingTmplCtlDot1p | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.6 | Dot1PPriority (0..7) | RC | |
column · Dot1PPriority (0..7) · read-create · current The value of tmnxOamIfPingTmplCtlDot1p specifies the values of the Ethernet dot1p bits in the outer and any inner Ethernet header, when dot1q or qinq encapsulation is used. The field is not exposed to egress QoS policy. | ||||
| CtmnxOamIfPingTmplCtlInterval | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.7 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current The value of tmnxOamIfPingTmplCtlInterval specifies the packets transmit interval used when the interface is operational.
| ||||
| CtmnxOamIfPingTmplCtlTimeout | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.8 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current The value of tmnxOamIfPingTmplCtlTimeout specifies the time the function will wait before declaring an ICMP echo request packet is lost.
| ||||
| CtmnxOamIfPingTmplCtlFailThrld | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.9 | Unsigned32 (2..10) | RC | |
column · Unsigned32 (2..10) · read-create · current The value of tmnxOamIfPingTmplCtlFailThrld specifies a count that causes the transition of the IP interface from operationally up to operationally down because of ping-template failure. | ||||
| CtmnxOamIfPingTmplCtlReactInt | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.10 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current The value of tmnxOamIfPingTmplCtlReactInt specifies the packets transmit interval used when the IP interface is operationally down because of ping-template failure and the previous ICMP echo request successfully received a response.
| ||||
| CtmnxOamIfPingTmplCtlReactFailThr | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.11 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamIfPingTmplCtlReactFailThr specifies the number of consecutive failures without previous successes, that must occur transmitting at the reactivation interval before changing to the standard interval and subsequently waiting for the first success. | ||||
| CtmnxOamIfPingTmplCtlReactTimeout | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.12 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current The value of tmnxOamIfPingTmplCtlReactTimeout specifies the wait time before declaring the packet is lost.
| ||||
| CtmnxOamIfPingTmplCtlReactThrld | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.13 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamIfPingTmplCtlReactThrld specifies the number of consecutive successful ICMP responses that triggers the interface from operationally down to operationally up. | ||||
| CtmnxOamIfPingTmplCtlSize | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.14 | Unsigned32 (12..9786) | RC | |
column · Unsigned32 (12..9786) · read-create · current The value of tmnxOamIfPingTmplCtlSize specifies the size of the IP packet before the Ethernet header is applied.
| ||||
| CtmnxOamIfPingTmplCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.15 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The value of tmnxOamIfPingTmplCtlTtl specifies the time to live setting in the ICMP ping packet. | ||||
| CtmnxOamIfPingTmplCtlSync | 1.3.6.1.4.1.6527.3.1.2.11.8.1.1.16 | TmnxActionType | RC | |
column · TmnxActionType · read-create · current Setting this object to 'doAction' triggers an attempt to to update all interfaces that use the specified ping-template and update all interfaces that are using previously configured values that do not match the currently active template. An SNMP GET request on this object returns 'notApplicable'. | ||||
| TtmnxOamIfPingIfTable | 1.3.6.1.4.1.6527.3.1.2.11.8.2 | NA | ||
table · not-accessible · current The tmnxOamIfPingIfTable has an entry for each interface associated with a ping-template. | ||||
| RtmnxOamIfPingIfEntry | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1 | NA | ||
row · not-accessible · current Each row entry in the tmnxOamIfPingIfEntry represents an interface on this router that uses a ping-template. An entry in this table can be created or destroyed by an SNMP SET request to tmnxOamIfPingIfRowStatus. An attempt to destroy a row will fail if tmnxOamIfPingIfAdminState has not first been set to 'outOfService'.
| ||||
| CtmnxOamIfPingIfRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamIfPingIfRowStatus is used to create or delete an entry in this table. Before this row can be destroyed, tmnxOamIfPingIfAdminState must have been set to 'outOfService'. | ||||
| CtmnxOamIfPingIfTemplate | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.2 | TLNamedItem | RC | |
column · TLNamedItem · read-create · current The value of tmnxOamIfPingIfTemplate specifies the ping-template. A value of this object must be specified when the row is created. The ping-template name must exist in the tmnxOamIfPingTmplCtlTable | ||||
| CtmnxOamIfPingIfLastChanged | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamIfPingIfLastChanged indicates the sysUpTime when this row was last modified. | ||||
| CtmnxOamIfPingIfAdminState | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.4 | TmnxAdminState | RC | |
column · TmnxAdminState · read-create · current The value of tmnxOamIfPingIfAdminState specifies the desired administrative state of the ping-template on this interface. | ||||
| CtmnxOamIfPingIfDestAddrType | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.5 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxOamIfPingIfDestAddrType specifies the type of address stored in tmnxOamIfPingIfDestAddr. | ||||
| CtmnxOamIfPingIfDestAddr | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RC | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-create · current The value of tmnxOamIfPingIfDestAddr specifies the IP destination address of the ICMP. A non-empty value must be a valid unicast IP address. | ||||
| CtmnxOamIfPingIfFailThrldCnt | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamIfPingIfFailThrldCnt indicates the count of contiguous ping failures that are counting towards the tmnxOamIfPingTmplCtlFailThrld when the interface is operationally up. | ||||
| CtmnxOamIfPingIfPassThrldCnt | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamIfPingIfPassThrldCnt indicates the count of contiguous ping successes that are counting towards the tmnxOamIfPingTmplCtlReactThrld when the interface is operationally down. | ||||
| CtmnxOamIfPingIfCtlDscp | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.9 | TDSCPName | RO | |
column · TDSCPName · read-only · current The value of tmnxOamIfPingIfCtlDscp indicates the DSCP to be carried in IP header of the ICMP echo request. | ||||
| CtmnxOamIfPingIfCtlDot1p | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.10 | Dot1PPriority (0..7) | RO | |
column · Dot1PPriority (0..7) · read-only · current The value of tmnxOamIfPingIfCtlDot1p indicates the values of the Ethernet dot1p bits in the outer and any inner Ethernet header, when dot1q or qinq encapsulation is used. The field is not exposed to egress QoS policy. | ||||
| CtmnxOamIfPingIfCtlInterval | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.11 | Unsigned32 (1..60) | RO | |
column · Unsigned32 (1..60) · read-only · current The value of tmnxOamIfPingIfCtlInterval indicates the packets transmit interval used when the interface is operational.
| ||||
| CtmnxOamIfPingIfCtlTimeout | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.12 | Unsigned32 (1..60) | RO | |
column · Unsigned32 (1..60) · read-only · current The value of tmnxOamIfPingIfCtlTimeout indicates the time the function will wait before declaring an ICMP echo request packet is lost.
| ||||
| CtmnxOamIfPingIfCtlFailThrld | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.13 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The value of tmnxOamIfPingIfCtlFailThrld indicates a count that causes the transition of the IP interface from operationally up to operationally down because of ping-template failure. | ||||
| CtmnxOamIfPingIfCtlReactInt | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.14 | Unsigned32 (1..60) | RO | |
column · Unsigned32 (1..60) · read-only · current The value of tmnxOamIfPingIfCtlReactInt indicates the packets transmit interval used when the IP interface is operationally down because of ping-template failure and the previous ICMP echo request successfully received a response.
| ||||
| CtmnxOamIfPingIfCtlReactFailThr | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.15 | Unsigned32 (0..10) | RO | |
column · Unsigned32 (0..10) · read-only · current The value of tmnxOamIfPingIfCtlReactFailThr indicates the number of consecutive failures without previous successes, that must occur transmitting at the reactivation interval before changing to the standard interval and subsequently waiting for the first success. | ||||
| CtmnxOamIfPingIfCtlReactTimeout | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.16 | Unsigned32 (1..60) | RO | |
column · Unsigned32 (1..60) · read-only · current The value of tmnxOamIfPingIfCtlReactTimeout indicates the wait time before declaring the packet is lost.
| ||||
| CtmnxOamIfPingIfCtlReactThrld | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.17 | Unsigned32 (1..10) | RO | |
column · Unsigned32 (1..10) · read-only · current The value of tmnxOamIfPingIfCtlReactThrld indicates the number of consecutive successful ICMP responses that triggers the interface from operationally down to operationally up. | ||||
| CtmnxOamIfPingIfCtlSize | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.18 | Unsigned32 (56..9786) | RO | |
column · Unsigned32 (56..9786) · read-only · current The value of tmnxOamIfPingIfCtlSize indicates the size of the IP packet before the Ethernet header is applied.
| ||||
| CtmnxOamIfPingIfCtlTtl | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.19 | Unsigned32 (1..255) | RO | |
column · Unsigned32 (1..255) · read-only · current The value of tmnxOamIfPingIfCtlTtl indicates the time to live setting in the ICMP ping packet. | ||||
| CtmnxOamIfPingIfCurrentInterval | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamIfPingIfCurrentInterval indicates if the ping check interval being used is the value of tmnxOamIfPingIfCtlInterval or tmnxOamIfPingIfCtlReactInt. A value of 'interval' indicates the ping check is failed, waiting for a first success, or that the ping check is Operational. A value of 'reactivation' indicates the ping check is recovering.
| ||||
| CtmnxOamIfPingIfCurrentState | 1.3.6.1.4.1.6527.3.1.2.11.8.2.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamIfPingIfCurrentState indicates the current state of the ping check, this will be used to drive the interface operational state. A value of 'operational' indicates the ping check succeeded, the interface is up. A value of 'recovering' indicates the ping check is recovering using the reactivation interval. A value of 'failed' indicates the ping check failed, the interface is down.
| ||||
| NtmnxOamLnkMeasObjs | 1.3.6.1.4.1.6527.3.1.2.11.9 | |||
| TtmnxOamLnkMeasTmplCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.9.1 | NA | ||
table · not-accessible · current tmnxOamLnkMeasTmplCtlTable allows link measurement templates to be configured. A link measurement template is configured against a router interface to measure delay between nodes. A change to any object in this table (except for tmnxOamLnkMeasTmplCtlDescription, tmnxOamLnkMeasTmplCtlIpv6UdpZero, and tmnxOamLnkMeasTmplCtlLastRepHold) will cause active link measurement tests to stop and restart. | ||||
| RtmnxOamLnkMeasTmplCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1 | NA | ||
row · not-accessible · current tmnxOamLnkMeasTmplCtlEntry allows a link measurement template to be configured. Rows are created or destroyed by SNMP Set operations on tmnxOamLnkMeasTmplCtlRowStatus. | ||||
| CtmnxOamLnkMeasTmplCtlName | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.1 | TLNamedItem | NA | |
column · TLNamedItem · not-accessible · current The value of tmnxOamLnkMeasTmplCtlName specifies the name of the link measurement template. This is the INDEX for tmnxOamLnkMeasTmplCtlTable. | ||||
| CtmnxOamLnkMeasTmplCtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamLnkMeasTmplCtlRowStatus specifies the row status of the link measurement template. | ||||
| CtmnxOamLnkMeasTmplCtlLastMgmtChg | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLnkMeasTmplCtlLastMgmtChg indicates the sysUpTime at the time of the most recent management-initiated change to this table row. | ||||
| CtmnxOamLnkMeasTmplCtlDescription | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.4 | TItemDescription | RC | |
column · TItemDescription · read-create · current The value of tmnxOamLnkMeasTmplCtlDescription specifies the descriptive text for the link measurement template. | ||||
| CtmnxOamLnkMeasTmplCtlUnidirMeasT | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamLnkMeasTmplCtlUnidirMeasT specifies how to compute
a unidirectional delay measurement.
Values:
derived(1)
Computes the unidirectional measurement using the round trip
delay divided by two. This option should be used when the
nodal clocks are not synchronized.
actual(2)
Uses the forward delay as the unidirectional measurement.
Forward delay is calculated using T2-T1 timestamp values.
| ||||
| CtmnxOamLnkMeasTmplCtlDelayMeasTy | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamLnkMeasTmplCtlDelayMeasTy specifies the type of
delay measurement that is used for comparison and reporting.
It is used at both the sample window and the aggregate sample window
level.
Values:
min(1)
Take the minimum of a series of measurements for comparison and
reporting.
max(2)
Take the maximum of a series of measurements for comparison and
reporting.
average(3)
Compute the average of a series of measurements for comparison
and reporting.
| ||||
| CtmnxOamLnkMeasTmplCtlInterval | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.7 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamLnkMeasTmplCtlInterval specifies the elapsed time between transmission of test packets for the specified template.
| ||||
| CtmnxOamLnkMeasTmplCtlLastRepHold | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.8 | Unsigned32 (0 | 1..86400) | RC | |
column · Unsigned32 (0 | 1..86400) · read-create · current The value of tmnxOamLnkMeasTmplCtlLastRepHold specifies how long a delay measurement is to be retained after the interface on which it was collected is administratively disabled. If the configured value is reached, the last reported measurement, tmnxOamLnkMeasIfResDelayReported, is set to zero.
| ||||
| CtmnxOamLnkMeasTmplCtlDscpEgrRmrk | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamLnkMeasTmplCtlDscpEgrRmrk specifies whether or not to allow each echo request packet's IP header Differentiated Services Code Point (DSCP) to be overwritten in accordance with the egress port's Quality of Service (QoS) policy. If the value of this object is 'true(1)', the IP header's DSCP may be overwritten. | ||||
| CtmnxOamLnkMeasTmplCtlIpv6UdpZero | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamLnkMeasTmplCtlIpv6UdpZero specifies whether or not to allow the processing of IPv6 packets received with a UDP checksum of zero. When tmnxOamLnkMeasTmplCtlIpv6UdpZero is false, IPv6 packets received with a UDP checksum of zero are discarded. | ||||
| CtmnxOamLnkMeasTmplCtlDscpName | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.11 | TDSCPName | RC | |
column · TDSCPName · read-create · current The value of tmnxOamLnkMeasTmplCtlDscpName specifies the Differentiated Services Code Point (DSCP) to be copied into the IP header of each echo request packet launched for each link measurement test belonging to the specified template. | ||||
| CtmnxOamLnkMeasTmplCtlDstUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.12 | InetPortNumber (1..65535) | RC | |
column · InetPortNumber (1..65535) · read-create · current The value of tmnxOamLnkMeasTmplCtlDstUdpPort specifies the destination UDP port to be copied into the UDP header of each echo request packet launched for each link measurement test belonging to the specified template. The default port (862) is the IANA standard TWAMP receiver port. | ||||
| CtmnxOamLnkMeasTmplCtlFC | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.13 | TFCName | RC | |
column · TFCName · read-create · current The value of tmnxOamLnkMeasTmplCtlFC specifies the Quality of Service forwarding class to be used when launching the link measurement test belonging to the specified template. | ||||
| CtmnxOamLnkMeasTmplCtlProfile | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.14 | TProfile | RC | |
column · TProfile · read-create · current The value of tmnxOamLnkMeasTmplCtlProfile specifies the Quality of Service profile to be used when launching the link measurement test belonging to the specified template. | ||||
| CtmnxOamLnkMeasTmplCtlTwlTmStpFmt | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamLnkMeasTmplCtlTwlTmStpFmt specifies the timestamp
format to be used in the TWAMP Light PDU.
Values:
ntp(1)
Network Time Protocol
ptp(2)
Precision Time Protocol
| ||||
| CtmnxOamLnkMeasTmplCtlTwlTimeLive | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.16 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The value of tmnxOamLnkMeasTmplCtlTwlTimeLive specifies the time to live value in the TWAMP IP header. | ||||
| CtmnxOamLnkMeasTmplCtlSWMultplir | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.17 | Unsigned32 (1..900) | RC | |
column · Unsigned32 (1..900) · read-create · current The value of tmnxOamLnkMeasTmplCtlSWMultplir specifies the multiplier that is applied to the interval (tmnxOamLnkMeasTmplCtlInterval) to derive the number of seconds for which a sample window is open and can collect delay measurements. For example, a sample window multiplier of 10 and an interval value of 5 seconds result in a sample window being open for 10 * 5 seconds = 50 seconds. This window collects samples and computes a single value upon completion. | ||||
| CtmnxOamLnkMeasTmplCtlSWIntegrity | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.18 | Unsigned32 (0 | 1..100) | RC | |
column · Unsigned32 (0 | 1..100) · read-create · current The value of tmnxOamLnkMeasTmplCtlSWIntegrity specifies the percentage of request-response pairs that must be successfully sent and received during the sample window for its series of measurements to be deemed worthy of reporting to the aggregate sample window or the routing engine. A value of 0 specifies that no integrity value must be met for measurements to be reported. Failure of all request-response pairs in a sample window will be treated as a special case. Zero will not be reported, but a value representing 'N/A' will be conveyed.
| ||||
| CtmnxOamLnkMeasTmplCtlSWThrldRel | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.19 | Unsigned32 (0 | 1..500) | RC | |
column · Unsigned32 (0 | 1..500) · read-create · current The value of tmnxOamLnkMeasTmplCtlSWThrldRel specifies the percentage value of change, positive or negative, a new delay measurement must differ from the previously reported measurement to be deemed worthy of reporting directly to the routing engine (circumventing the aggregate sample window). If this percentage value is reached, the accumulated aggregate data will be cleared, the aggregate window will be reset, and the new delay measurement will be reported to the routing engine and used as the most recently reported measurement. A value of zero specifies that the sample window measurement will not be measured against tmnxOamLnkMeasTmplCtlSWThrldRel but will be reported directly to the aggregate sample window (assuming integrity). The absolute threshold, tmnxOamLnkMeasTmplCtlSWThrldAbs, will be checked before this object, the relative threshold, tmnxOamLnkMeasTmplCtlSWThrldRel.
| ||||
| CtmnxOamLnkMeasTmplCtlSWThrldAbs | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.20 | Unsigned32 (0 | 1..100000) | RC | |
column · Unsigned32 (0 | 1..100000) · read-create · current The value of tmnxOamLnkMeasTmplCtlSWThrldAbs specifies the delta, in microseconds, that a new delay measurement must differ from the previously reported measurement to be deemed worthy of reporting directly to the routing engine (circumventing the aggregate sample window). If this value is reached the accumulated aggregate data will be cleared, the aggregate window will be reset, and the new delay measurement will be reported to the routing engine and used as the most recently reported measurement. A value of zero specifies that the sample window measurement will not be measured against tmnxOamLnkMeasTmplCtlSWThrldAbs but will be reported directly to the aggregate sample window (assuming integrity). This object, the absolute threshold, tmnxOamLnkMeasTmplCtlSWThrldAbs, will be checked before the relative, tmnxOamLnkMeasTmplCtlSWThrldRel.
| ||||
| CtmnxOamLnkMeasTmplCtlASWMultplir | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.21 | Unsigned32 (1..12) | RC | |
column · Unsigned32 (1..12) · read-create · current The value of tmnxOamLnkMeasTmplCtlASWMultplir specifies the multiplier that is applied to the sample window multiplier (tmnxOamLnkMeasTmplCtlSWMultplir) to derive the number of seconds for which an aggregate sample window is open and can collect delay measurements. For example, an aggregate sample window multiplier of 3 and a sample window duration of 50 seconds (as computed in the description of tmnxOamLnkMeasTmplCtlSWMultplir) result in an aggregate sample window being open for 3 * 50 seconds = 150 seconds (i.e.: 3 sample windows in the aggregate sample window). Values computed in sample windows are passed to the open aggregate sample window. At the end of this aggregate window timer a result is computed based on tmnxOamLnkMeasTmplCtlDelayMeasTy and is passed to the routing engine (depending on the ASW threshold configuration). | ||||
| CtmnxOamLnkMeasTmplCtlASWIntgrity | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.22 | Unsigned32 (0 | 1..100) | RC | |
column · Unsigned32 (0 | 1..100) · read-create · current The value of tmnxOamLnkMeasTmplCtlASWIntgrity specifies the percentage of sample window measurements that must have met their integrity value, tmnxOamLnkMeasTmplCtlSWIntegrity, for the aggregate result to be deemed worthy of reporting to the routing engine. A value of 0 specifies that no integrity value must be met for measurements to be reported to the routing engine. Failure of all sample windows to meet their integrity values will be treated as a special case. Zero will not be reported to the routing engine, but a value representing 'N/A' will be reported.
| ||||
| CtmnxOamLnkMeasTmplCtlASWThrldRel | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.23 | Unsigned32 (0 | 1..100) | RC | |
column · Unsigned32 (0 | 1..100) · read-create · current The value of tmnxOamLnkMeasTmplCtlASWThrldRel specifies the percentage value of change, positive or negative, a new aggregate delay measurement must differ from the previously reported aggregate measurement to be deemed worthy of reporting to the routing engine. A value of zero specifies that the aggregate sample window measurement will not be measured against tmnxOamLnkMeasTmplCtlASWThrldRel but will be reported directly to the routing engine (assuming integrity). The absolute threshold, tmnxOamLnkMeasTmplCtlASWThrldAbs, will be checked before this object, the relative threshold, tmnxOamLnkMeasTmplCtlASWThrldRel.
| ||||
| CtmnxOamLnkMeasTmplCtlASWThrldAbs | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.24 | Unsigned32 (0 | 1..100000) | RC | |
column · Unsigned32 (0 | 1..100000) · read-create · current The value of tmnxOamLnkMeasTmplCtlASWThrldAbs specifies the delta, in microseconds, that a new aggregate delay measurement must differ from the previously reported aggregate measurement to be deemed worthy of reporting to the routing engine. A value of zero specifies that the aggregate sample window measurement will not be measured against tmnxOamLnkMeasTmplCtlASWThrldAbs but will be reported directly to the routing engine (assuming integrity). This object, the absolute threshold, tmnxOamLnkMeasTmplCtlASWThrldAbs, will be checked before the relative, tmnxOamLnkMeasTmplCtlASWThrldRel.
| ||||
| CtmnxOamLnkMeasTmplCtlAdminState | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.25 | TmnxEnabledDisabledAdminState | RC | |
column · TmnxEnabledDisabledAdminState · read-create · current The value of tmnxOamLnkMeasTmplCtlAdminState specifies whether the template is administratively disabled or administratively enabled. The objects in a link measurement template cannot be modified while tmnxOamLnkMeasTmplCtlAdminState is enabled. Changes made to a disabled link measurement template are propagated to associated interfaces when tmnxOamLnkMeasTmplCtlAdminState is enabled. An interface will not run the link measurement test when its associated template's tmnxOamLnkMeasTmplCtlAdminState is disabled. | ||||
| CtmnxOamLnkMeasTmplCtlTwl6DscItvl | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.26 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamLnkMeasTmplCtlTwl6DscItvl specifies the transmission frequency of the discovery packet on the all-routers multicast group (ff02::2) during the discovery of a peer's link-local address. The probe packets will be transmitted at this frequency for the duration of the initial discovery phase as defined by tmnxOamLnkMeasTmplCtlTwl6DscTimr. The probe packets are sent when the test-oam link-measurement protocol is set to IPv6 and no destination address has been configured.
| ||||
| CtmnxOamLnkMeasTmplCtlTwl6DscTimr | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.27 | Unsigned32 (1..1800) | RC | |
column · Unsigned32 (1..1800) · read-create · current The value of tmnxOamLnkMeasTmplCtlTwl6DscTimr specifies the length of time the discovery process remains in its initial phase following a link-measurement transition to operational up. The expiration of this timer causes an exit of the initial discovery. The tmnxOamLnkMeasTmplCtlTwl6UpdItvl frequency is used after this timer expires.
| ||||
| CtmnxOamLnkMeasTmplCtlTwl6UpdItvl | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.28 | Unsigned32 (0 | 1..3600) | RC | |
column · Unsigned32 (0 | 1..3600) · read-create · current The value of tmnxOamLnkMeasTmplCtlTwl6UpdItvl specifies the frequency used for probe packets once tmnxOamLnkMeasTmplCtlTwl6DscTimr timer expires. This is typically for maintaining and discovering changes to a previously discovered peer. The frequency for maintaining the peer should be much less aggressive than that used for the initial-discovery phase.
| ||||
| CtmnxOamLnkMeasTmplCtlTwl6AdmSta | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.29 | TmnxEnabledDisabledAdminState | RC | |
column · TmnxEnabledDisabledAdminState · read-create · current The value of tmnxOamLnkMeasTmplCtlTwl6AdmSta specifies the enabling and disabling of the IPv6 peer discovery. If the protocol for the test-oam link-measurement interface test is IPv6, and there is no peer specified, tmnxOamLnkMeasTmplCtlTwl6AdmSta set to 'enabled' will enable IPv6 peer discovery and the link-local peer will be auto-learned. | ||||
| CtmnxOamLnkMeasTmplCtlSrcUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.30 | InetPortNumber (0 | 64374..64383) | RC | |
column · InetPortNumber (0 | 64374..64383) · read-create · current The value of tmnxOamLnkMeasTmplCtlSrcUdpPort specifies the source UDP port for the test. Zero requests the allocation of a UDP port from the dynamic range (49152..65535, excluding reserved ranges like 64374..64383). A non-zero value refers to a port in the link-measurement UDP port pool (see tmnxOamTwlSrcUdpPoolsPoolType). | ||||
| CtmnxOamLnkMeasTmplCtlReporting | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.31 | TmnxEnabledDisabled | RC | |
column · TmnxEnabledDisabled · read-create · current The value of tmnxOamLnkMeasTmplCtlReporting specifies whether values that cross a configured threshold should be reported to the routing engine. When reporting is enabled, values that cross thresholds will report changes to the routing engine. When reporting is disabled, values that cross thresholds are not reported to the routing engine. In both case the sample window and aggregate sample window information and computed values are stored on the node until overwritten. | ||||
| CtmnxOamLnkMeasTmplCtlPadTlvSize | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.32 | Unsigned32 (0 | 4..9714) | RC | |
column · Unsigned32 (0 | 4..9714) · read-create · current The value of tmnxOamLnkMeasTmplCtlPadTlvSize specifies a pad TLV be included when the value is non-zero. The length of pad TLV is equal to the configured value.
| ||||
| CtmnxOamLnkMeasTmplCtlRetPathLink | 1.3.6.1.4.1.6527.3.1.2.11.9.1.1.33 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamLnkMeasTmplCtlRetPathLink specifies whether the return-path TLV is included with the test packet. The Return Path TLV contains one or more sub-TLVs to carry the information for the requested return path. The control code is a 32-bit field. Support has been introduced for control-code 0x1 (the presence of control-code 0x1 is equivalent to tmnxOamLnkMeasTmplCtlRetPathLink = true). This control code instructs the reflector to use the link the test packet arrived on for the reflected packet. The destination IP address of the reflected packet must be reachable from this interface, or the packet will be discarded on the reflector. | ||||
| TtmnxOamLnkMeasIfResTable | 1.3.6.1.4.1.6527.3.1.2.11.9.2 | NA | ||
table · not-accessible · current tmnxOamLnkMeasIfResTable contains delay measurement information from interfaces that have an associated link measurement template. (For the interface to be collecting link measurement data, it must be associated with a link measurement template found in tmnxOamLnkMeasTmplCtlTable.) | ||||
| RtmnxOamLnkMeasIfResEntry | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1 | NA | ||
row · not-accessible · current tmnxOamLnkMeasIfResEntry contains source and destination IP address information, operational state and failure condition information, as well as delay measurement data and meta data. A row is created in tmnxOamLnkMeasIfResTable when a link measurement template is associated with an interface. A row is destroyed in tmnxOamLnkMeasIfResTable when the association between the interface and its link measurement template is broken.
| ||||
| CtmnxOamLnkMeasIfResSrcIpAddrTy | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.1 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLnkMeasIfResSrcIpAddrTy indicates the address type of tmnxOamLnkMeasIfResSrcIpAddr. | ||||
| CtmnxOamLnkMeasIfResSrcIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.2 | InetAddress (SIZE (4 | 16 | 20)) | RO | |
column · InetAddress (SIZE (4 | 16 | 20)) · read-only · current The value of tmnxOamLnkMeasIfResSrcIpAddr indicates the source IP address from which TWAMP packets are being sent. The address is configured using TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4SrcAddr or TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6SrcAddr. If a configured value is present, it is returned. If no value is configured, the configured interface address (TIMETRA-VRTR-MIB::vRiaInetAddress) is returned. | ||||
| CtmnxOamLnkMeasIfResSrcIpAssigned | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLnkMeasIfResSrcIpAssigned indicates whether tmnxOamLnkMeasIfResSrcIpAddr was assigned (true) or configured (false). | ||||
| CtmnxOamLnkMeasIfResDstIpAddrTy | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.4 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLnkMeasIfResDstIpAddrTy indicates the address type of tmnxOamLnkMeasIfResDstIpAddr. | ||||
| CtmnxOamLnkMeasIfResDstIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.5 | InetAddress (SIZE (4 | 16 | 20)) | RO | |
column · InetAddress (SIZE (4 | 16 | 20)) · read-only · current The value of tmnxOamLnkMeasIfResDstIpAddr indicates the destination IP address to which TWAMP packets are being sent. The address is configured using TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4DstAddr or TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6DstAddr. If a configured value is present, it is returned. If no value is configured, SROS selects a destination address, and it is returned. | ||||
| CtmnxOamLnkMeasIfResDstIpAssigned | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLnkMeasIfResDstIpAssigned indicates whether tmnxOamLnkMeasIfResDstIpAddr was assigned (true) or configured (false). | ||||
| CtmnxOamLnkMeasIfResOperState | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.7 | ServiceOperStatus | RO | |
column · ServiceOperStatus · read-only · current The value of tmnxOamLnkMeasIfResOperState indicates the operational state of link measurement on this interface. This state is determined by the administrative state of the link measurement template (tmnxOamLnkMeasTmplCtlAdminState), the administrative state of the interface (TIMETRA-VRTR-MIB::vRtrIfAdminState), and the administrative state of the interface's link measurement chosen internet protocol (TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4AdminState or TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6AdminState). | ||||
| CtmnxOamLnkMeasIfResFailureCond | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.8 | Bits | RO | |
column · Bits · read-only · current The value of tmnxOamLnkMeasIfResFailureCond indicates the reason(s) why this interface's link measurement is operationally disabled. This state is determined by the administrative state of the link measurement template (tmnxOamLnkMeasTmplCtlAdminState), the administrative state of the interface (TIMETRA-VRTR-MIB::vRtrIfAdminState), and the administrative state of the interface's link measurement chosen internet protocol (TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4AdminState or TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6AdminState).
| ||||
| CtmnxOamLnkMeasIfResDetctbleTxErr | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLnkMeasIfResDetctbleTxErr indicates a detectable
error in delay measurement transmission.
none (1) No transmission failure detected
interfaceDown (2) The IP interface associated with the delay
measurement test is operationally down or
administratively disabled
unexpectedError (3) Transmission failed due to unexpected
conditions, such as failed memory allocation,
traffic congestion, or failure to obtain
necessary resources
noRoute (4) There is no IP route to the destination
address from this interface
sourceIpNotLocal (5) The source IP address is not local
invalidDestIp (6) The destination IP address is not valid
invalidInterfaceType (7) The interface is not a supported type
sameSourceIpDestIp (8) The source and destination IP are the same,
creating an invalid transmission condition.
| ||||
| CtmnxOamLnkMeasIfResReporting | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLnkMeasIfResReporting indicates whether the interface is currently reporting to the routing engine. The interface will not report if all thresholds are disabled or there are failure conditions present (tmnxOamLnkMeasIfResFailureCond). | ||||
| CtmnxOamLnkMeasIfResDelayReported | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.11 | Integer32 (-1 | 0 | 1..2147483647) | RO | |
column · Integer32 (-1 | 0 | 1..2147483647) · read-only · current The value of tmnxOamLnkMeasIfResDelayReported indicates the last delay measurement reported to the routing engine. A value of -1 (negative one) indicates that no delay has been reported because a value has yet to be reported in a new delay measurement session. A value of 0 (zero) indicates the last reported measurement was discarded due to exceeding the measurement template's configured stale measurement timer (tmnxOamLnkMeasTmplCtlLastRepHold).
| ||||
| CtmnxOamLnkMeasIfResTimestampUTC | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.12 | DateAndTime (SIZE (8)) | RO | |
column · DateAndTime (SIZE (8)) · read-only · current The value of tmnxOamLnkMeasIfResTimestampUTC indicates a timestamp influenced by the value stored in tmnxOamLnkMeasIfResDelayReported. When tmnxOamLnkMeasIfResDelayReported > 0, tmnxOamLnkMeasIfResTimestampUTC holds the time at which tmnxOamLnkMeasIfResDelayReported was reported to the routing engine. When tmnxOamLnkMeasIfResDelayReported = 0, tmnxOamLnkMeasIfResTimestampUTC holds the time at which tmnxOamLnkMeasIfResDelayReported was cleared (because its aging timer expired). When tmnxOamLnkMeasIfResDelayReported = -1, tmnxOamLnkMeasIfResTimestampUTC holds '1970-Jan-01 00:00:00.0' UTC as a placeholder representing a delay has not yet been reported to the routing engine. | ||||
| CtmnxOamLnkMeasIfResTriggeredBy | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLnkMeasIfResTriggeredBy indicates whether the last reported delay (tmnxOamLnkMeasIfResDelayReported) was triggered by a sample window threshold (absolute or relative), an aggregate sample window threshold (absolute or relative), has not yet been triggered (none) or has been discarded because the age of the last reported delay (tmnxOamLnkMeasIfResDelayReported) exceeded the value configured by tmnxOamLnkMeasTmplCtlLastRepHold. 'reportingDisabled' indicates that the clear value for tmnxOamLnkMeasIfResDelayReported was sent to the routing engine because one or more link measurement parameters were deconfigured.
| ||||
| CtmnxOamLnkMeasIfResNewestASWIdx | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResNewestASWIdx indicates the index of the newest aggregate sample window result in tmnxOamLnkMeasIfResASWTable for this interface. A value of zero indicates there are no aggregate sample window results for this interface. | ||||
| CtmnxOamLnkMeasIfResNewestSWIdx | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResNewestSWIdx indicates the index of the newest sample window result in tmnxOamLnkMeasIfResSWTable for this interface. A value of zero indicates there are no sample window results for this interface. | ||||
| CtmnxOamLnkMeasIfResSrcUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.16 | InetPortNumber | RO | |
column · InetPortNumber · read-only · current The value of tmnxOamLnkMeasIfResSrcUdpPort indicates the source UDP port in use for this interface. | ||||
| CtmnxOamLnkMeasIfResDstUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.17 | InetPortNumber | RO | |
column · InetPortNumber · read-only · current The value of tmnxOamLnkMeasIfResDstUdpPort indicates the destination UDP port in use for this interface. | ||||
| CtmnxOamLnkMeasIfResStampSessId | 1.3.6.1.4.1.6527.3.1.2.11.9.2.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResStampSessId indicates the autogenerated session-ID assigned to the session. | ||||
| TtmnxOamLnkMeasIfResASWTable | 1.3.6.1.4.1.6527.3.1.2.11.9.3 | NA | ||
table · not-accessible · current tmnxOamLnkMeasIfResASWTable contains the aggregate sample window results for all interfaces with link measurement enabled. For the interface to be collecting link measurement data, it must be associated with a link measurement template found in tmnxOamLnkMeasTmplCtlTable. | ||||
| RtmnxOamLnkMeasIfResASWEntry | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1 | NA | ||
row · not-accessible · current tmnxOamLnkMeasIfResASWEntry contains one aggregate sample window result for the specified interface. For the interface to be collecting link measurement data, it must be associated with a link measurement template. A row is created by SROS when an aggregate sample window is created. A row is destroyed by SROS when the associated tmnxOamLnkMeasIfResTable row is destroyed or the limit on the number of aggregate sample windows retained (10) per interface is met, and a new aggregate sample window is created. In that case, the row for the interface's oldest aggregate sample window is destroyed. | ||||
| CtmnxOamLnkMeasIfResASWIndex | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamLnkMeasIfResASWIndex specifies the index value of aggregate sample windows on the same interface. At most 10 indices (e.g.: 51..60) are accessible at a time. The most recent result is stored at the index tmnxOamLnkMeasIfResNewestASWIdx. | ||||
| CtmnxOamLnkMeasIfResASWEndUTC | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.2 | DateAndTime (SIZE (8)) | RO | |
column · DateAndTime (SIZE (8)) · read-only · current The value of tmnxOamLnkMeasIfResASWEndUTC indicates the time at which this aggregate sample window closed. 1970-Jan-01 00:00:00.0 UTC is returned if this aggregate sample window is in progress. | ||||
| CtmnxOamLnkMeasIfResASWState | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLnkMeasIfResASWState indicates whether this aggregate sample window has ended (completed), is in progress (inProgress), triggered a report to the routing engine because a sample window threshold was exceeded (swReported), triggered a report to the routing engine because an aggregate sample window threshold was exceeded (aswReported), or the window was interrupted and discarded because administrative changes were detected during transmission (terminated).
| ||||
| CtmnxOamLnkMeasIfResASWWindCount | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResASWWindCount indicates the number of sample windows that have completed and met their integrity value within this aggregate sample window. | ||||
| CtmnxOamLnkMeasIfResASWReportMin | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResASWReportMin indicates the minimum delay measurement reported to the aggregate sample window (by the sample windows that have been open during its lifetime). A value of zero indicates an invalid delay measurement (not a minimum delay measurement of zero).
| ||||
| CtmnxOamLnkMeasIfResASWReportMax | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResASWReportMax indicates the maximum delay measurement reported to the aggregate sample window (by the sample windows that have been open during its lifetime). A value of zero indicates an invalid delay measurement (not a maximum delay measurement of zero).
| ||||
| CtmnxOamLnkMeasIfResASWReportAvg | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResASWReportAvg indicates the average delay measurement reported to the aggregate sample window (by the sample windows that have been open during its lifetime). A value of zero indicates an invalid delay measurement (not an average delay measurement of zero).
| ||||
| CtmnxOamLnkMeasIfResASWIntegrity | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLnkMeasIfResASWIntegrity indicates whether a sufficient percentage of this aggregate sample window's child sample windows met their configured integrity value. (See tmnxOamLnkMeasIfResSWIntegrity for details on sample window integrity.) If the sample window does not have a integrity value configured then tmnxOamLnkMeasIfResASWIntegrity will always be true. | ||||
| CtmnxOamLnkMeasIfResASWResult | 1.3.6.1.4.1.6527.3.1.2.11.9.3.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResASWResult indicates the delay that was being evaluated for report according to tmnxOamLnkMeasTmplCtlDelayMeasTy when this aggregate sample window was open.
| ||||
| TtmnxOamLnkMeasIfResSWTable | 1.3.6.1.4.1.6527.3.1.2.11.9.4 | NA | ||
table · not-accessible · current tmnxOamLnkMeasIfResSWTable contains sample window results for all interfaces with link measurement enabled. (For the interface to be collecting link measurement data, it must be associated with a link measurement template found in tmnxOamLnkMeasTmplCtlTable.) | ||||
| RtmnxOamLnkMeasIfResSWEntry | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1 | NA | ||
row · not-accessible · current tmnxOamLnkMeasIfResSWEntry contains one sample window result for the specified interface. (For the interface to be collecting link measurement data, it must be associated with a link measurement template.) A row is created by SROS when a sample window is created. A row is destroyed by SROS when the associated tmnxOamLnkMeasIfResTable row is destroyed or the limit on the number of sample windows retained (50) per interface is met, and a new sample window is created. In that case, the row for the interface's oldest sample window is destroyed. | ||||
| CtmnxOamLnkMeasIfResSWIndex | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamLnkMeasIfResSWIndex specifies an index used to differentiate sample windows on the same interface over time. At most 50 indices (e.g.: 51..100) are accessible at a time. The most recent result is stored at the index tmnxOamLnkMeasIfResNewestSWIdx. | ||||
| CtmnxOamLnkMeasIfResSWEndUTC | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.2 | DateAndTime (SIZE (8)) | RO | |
column · DateAndTime (SIZE (8)) · read-only · current The value of tmnxOamLnkMeasIfResSWEndUTC indicates the time at which this sample window closed. 1970-Jan-01 00:00:00.0 UTC is returned if this sample window is in progress. | ||||
| CtmnxOamLnkMeasIfResSWState | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLnkMeasIfResSWState indicates whether this sample window has ended (completed), is in progress (inProgress), triggered a report to the routing engine because a sample window threshold was exceeded (swReported), or the window was interrupted and discarded because administrative changes were detected during transmission (terminated).
| ||||
| CtmnxOamLnkMeasIfResSWSent | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWSent indicates the number of TWAMP packets that have been sent for this sample window. (A sent packet is a request for a response packet.) | ||||
| CtmnxOamLnkMeasIfResSWReceived | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWReceived indicates the number of TWAMP packets that have been received for this sample window. (A received packet is a response to a sent request packet.) | ||||
| CtmnxOamLnkMeasIfResSWMin | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWMin indicates the minimum of the series of delay measurements that occurred during this sample window. A value of zero indicates an invalid delay measurement (not a minimum delay measurement of zero).
| ||||
| CtmnxOamLnkMeasIfResSWMax | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWMax indicates the maximum of the series of delay measurements that occurred during this sample window. A value of zero indicates an invalid delay measurement (not a maximum delay measurement of zero).
| ||||
| CtmnxOamLnkMeasIfResSWAvg | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWAvg indicates the average of the series of delay measurements that occurred during this sample window. A value of zero indicates an invalid delay measurement (not an average delay measurement of zero).
| ||||
| CtmnxOamLnkMeasIfResSWErrors | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWErrors indicates the number of erroneous delay measurements that occurred in this sample window. Erroneous delay measurements are negative or zero measurements. These are caused by unsynchronized clocks. | ||||
| CtmnxOamLnkMeasIfResSWIntegrity | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLnkMeasIfResSWIntegrity indicates whether the percentage of successful request-response pairs of test packets met this sample window's configured integrity value. If the sample window does not have a integrity value configured then tmnxOamLnkMeasIfResSWIntegrity will always be true. | ||||
| CtmnxOamLnkMeasIfResSWResult | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWResult indicates the delay that was being evaluated for report according to tmnxOamLnkMeasTmplCtlDelayMeasTy when this sample window was open.
| ||||
| CtmnxOamLnkMeasIfResSWStampUFlag | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWStampUFlag indicates the count of packets in this sample window with the U (Unrecognized) bit set in the flags field of the TLV. | ||||
| CtmnxOamLnkMeasIfResSWStampMFlag | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWStampMFlag indicates the count of packets in this sample window with the M (Malformed) bit set in the flags field of the TLV. | ||||
| CtmnxOamLnkMeasIfResSWZeroNegErr | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWZeroNegErr indicates the count of packets that have a zero or negative computed delay. Both conditions are anomalous. Incrementing the counters for unidirectional=actual occurs when either direction (FWD=T2-T1 or BW=T4-T3) report the condition. A negative or zero in either direction calls in to question the value of the measurement in general. When using unidirectional derived tmnxOamLnkMeasIfResSWZeroNegErr will only be incremented if the round-trip result was negative. | ||||
| CtmnxOamLnkMeasIfResSWDuplicatErr | 1.3.6.1.4.1.6527.3.1.2.11.9.4.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLnkMeasIfResSWDuplicatErr indicates the count of duplicate packets that have arrived during this sample window. | ||||
| TtmnxOamTwlSrcUdpPoolsTable | 1.3.6.1.4.1.6527.3.1.2.11.9.5 | NA | ||
table · not-accessible · current tmnxOamTwlSrcUdpPoolsTable allows OAM source UDP ports to be assigned to one of two pools, OAM-PM or link-measurement. | ||||
| RtmnxOamTwlSrcUdpPoolsEntry | 1.3.6.1.4.1.6527.3.1.2.11.9.5.1 | NA | ||
row · not-accessible · current tmnxOamTwlSrcUdpPoolsEntry contains reserved source UDP port pool assignment information. The ports in this pool are in the range of 64374..64383. All rows in this table exist on boot. Rows cannot be created or destroyed. | ||||
| CtmnxOamTwlSrcUdpPoolsPort | 1.3.6.1.4.1.6527.3.1.2.11.9.5.1.1 | InetPortNumber (64374..64383) | NA | |
column · InetPortNumber (64374..64383) · not-accessible · current The value of tmnxOamTwlSrcUdpPoolsPort specifies the source UDP port used by the TWAMP Light test PDU in the reserved range 64374..64383. Which application this source UDP port is allocated is based on tmnxOamTwlSrcUdpPoolsPoolType. | ||||
| CtmnxOamTwlSrcUdpPoolsPoolType | 1.3.6.1.4.1.6527.3.1.2.11.9.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tmnxOamTwlSrcUdpPoolsPoolType specifies the application
that can configure tests or sessions using the corresponding source
UDP port.
Values:
oamPm(1)
An OAM Performance Monitoring session, as configured using
TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessIpSrcUdpPort.
linkMeasurement(2)
An OAM link measurement test, as configured using
tmnxOamLnkMeasTmplCtlSrcUdpPort.
OR
An OAM LAG Measurement test, as configured using
tmnxOamLagMeasTmplCtlSrcUdpPort.
Only source UDP ports assigned to the application can make use of this
source UDP port. A source UDP port cannot be allocated to a different
application if it is part of a configured test or session, regardless
of that test's or session's administrative or operational state.
| ||||
| TtmnxOamStsTwlSrcUdpPoolsTable | 1.3.6.1.4.1.6527.3.1.2.11.9.6 | NA | ||
table · not-accessible · current tmnxOamStsTwlSrcUdpPoolsTable contains OAM source UDP port usage data. | ||||
| RtmnxOamStsTwlSrcUdpPoolsEntry | 1.3.6.1.4.1.6527.3.1.2.11.9.6.1 | NA | ||
row · not-accessible · current tmnxOamStsTwlSrcUdpPoolsEntry contains OAM source UDP port usage data. | ||||
| CtmnxOamStsTwlSrcUdpPoolsInUse | 1.3.6.1.4.1.6527.3.1.2.11.9.6.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamStsTwlSrcUdpPoolsInUse indicates whether this source UDP port is in use under the application to which it is allocated. When tmnxOamStsTwlSrcUdpPoolsInUse is true, at least one test or session under the application to which it has been allocated has configured this source UDP port. If tmnxOamStsTwlSrcUdpPoolsInUse is false, no tests or sessions under that application is configured to use this source UDP port. A source UDP port cannot be allocated to a different application when this value is true. | ||||
| NtmnxOamLagMeasObjs | 1.3.6.1.4.1.6527.3.1.2.11.10 | |||
| TtmnxOamLagMeasTmplCtlTable | 1.3.6.1.4.1.6527.3.1.2.11.10.1 | NA | ||
table · not-accessible · current tmnxOamLagMeasTmplCtlTable allows LAG Measurement templates to be configured. A LAG Measurement template is configured against a Base router interface (which has a LAG as its physical interface) to measure delay, jitter, and loss on each member of the LAG. | ||||
| RtmnxOamLagMeasTmplCtlEntry | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1 | NA | ||
row · not-accessible · current tmnxOamLagMeasTmplCtlEntry allows a LAG Measurement template to be configured. Rows are created or destroyed by SNMP Set operations on tmnxOamLagMeasTmplCtlRowStatus. A change to any object in a row (except for tmnxOamLagMeasTmplCtlDescription) will restart the LAG Measurement tests that use the row. | ||||
| CtmnxOamLagMeasTmplCtlName | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.1 | TLNamedItem | NA | |
column · TLNamedItem · not-accessible · current The value of tmnxOamLagMeasTmplCtlName specifies the name of the LAG measurement template. This is the INDEX for tmnxOamLagMeasTmplCtlTable. | ||||
| CtmnxOamLagMeasTmplCtlRowStatus | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The value of tmnxOamLagMeasTmplCtlRowStatus specifies the row status of the LAG Measurement template. | ||||
| CtmnxOamLagMeasTmplCtlLastMgmtChg | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxOamLagMeasTmplCtlLastMgmtChg indicates the sysUpTime at the time of the most recent management-initiated change to this table row. | ||||
| CtmnxOamLagMeasTmplCtlAdminState | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.4 | TmnxEnabledDisabledAdminState | RC | |
column · TmnxEnabledDisabledAdminState · read-create · current The value of tmnxOamLagMeasTmplCtlAdminState specifies whether the template is administratively disabled or administratively enabled. An interface will not run the LAG Measurement test when the associated template's tmnxOamLagMeasTmplCtlAdminState is disabled. | ||||
| CtmnxOamLagMeasTmplCtlDescription | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.5 | TItemDescription | RC | |
column · TItemDescription · read-create · current The value of tmnxOamLagMeasTmplCtlDescription specifies the descriptive text for the LAG Measurement template. | ||||
| CtmnxOamLagMeasTmplCtlInterval | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.6 | Unsigned32 (1..10) | RC | |
column · Unsigned32 (1..10) · read-create · current The value of tmnxOamLagMeasTmplCtlInterval specifies the elapsed time between transmission of test packets for the specified template.
| ||||
| CtmnxOamLagMeasTmplCtlSWMultplier | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.7 | Unsigned32 (1..900) | RC | |
column · Unsigned32 (1..900) · read-create · current The value of tmnxOamLagMeasTmplCtlSWMultplier specifies the multiplier applied to the interval (i.e. tmnxOamLagMeasTmplCtlInterval) to derive the number of seconds a sample window is open and can collect measurements. For example, a sample window multiplier of 10 and an interval of 5 seconds result in a sample window being open for 50 seconds. | ||||
| CtmnxOamLagMeasTmplCtlIpv6UdpZero | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamLagMeasTmplCtlIpv6UdpZero specifies whether or not to allow the processing of IPv6 packets received with a UDP checksum of zero. When tmnxOamLagMeasTmplCtlIpv6UdpZero is 'false', IPv6 packets received with a UDP checksum of zero are discarded. | ||||
| CtmnxOamLagMeasTmplCtlSrcUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.9 | InetPortNumber (0 | 64374..64383) | RC | |
column · InetPortNumber (0 | 64374..64383) · read-create · current The value of tmnxOamLagMeasTmplCtlSrcUdpPort specifies the source UDP port for the test. Zero requests the allocation of a UDP port from the dynamic range (i.e. 49152..65535, excluding reserved ranges like 64374..64383). A non-zero value refers to a port in the link-measurement UDP port pool (see tmnxOamTwlSrcUdpPoolsPoolType). | ||||
| CtmnxOamLagMeasTmplCtlDstUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.10 | InetPortNumber (1..65535) | RC | |
column · InetPortNumber (1..65535) · read-create · current The value of tmnxOamLagMeasTmplCtlDstUdpPort specifies the destination UDP port to be copied into the UDP header of each echo request packet launched for each LAG Measurement test belonging to the specified template. The default port (862) is the IANA standard TWAMP receiver port. | ||||
| CtmnxOamLagMeasTmplCtlQosFCName | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.11 | TFCName | RC | |
column · TFCName · read-create · current The value of tmnxOamLagMeasTmplCtlQosFCName specifies the Quality of Service forwarding class to be used when launching the LAG Measurement test belonging to the specified template. | ||||
| CtmnxOamLagMeasTmplCtlQosProfile | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.12 | TProfile | RC | |
column · TProfile · read-create · current The value of tmnxOamLagMeasTmplCtlQosProfile specifies the Quality of Service profile to be used when launching the LAG Measurement test belonging to the specified template. | ||||
| CtmnxOamLagMeasTmplCtlDscpName | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.13 | TDSCPName | RC | |
column · TDSCPName · read-create · current The value of tmnxOamLagMeasTmplCtlDscpName specifies the Differentiated Services Code Point (DSCP) to be copied into the IP header of each echo request packet launched for each LAG Measurement test belonging to the specified template. | ||||
| CtmnxOamLagMeasTmplCtlDscpEgrRmrk | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxOamLagMeasTmplCtlDscpEgrRmrk specifies whether or not to allow each echo request packet's IP header Differentiated Services Code Point (DSCP) to be overwritten in accordance with the egress port's Quality of Service (QoS) policy. If the value of this object is 'true', the IP header's DSCP may be overwritten. | ||||
| CtmnxOamLagMeasTmplCtlTimeStmpFmt | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tmnxOamLagMeasTmplCtlTimeStmpFmt specifies the timestamp
format to be used in the TWAMP Light PDU.
Values:
ntp(1)
Network Time Protocol
ptp(2)
Precision Time Protocol
| ||||
| CtmnxOamLagMeasTmplCtlTimeToLive | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.16 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The value of tmnxOamLagMeasTmplCtlTimeToLive specifies the Time To Live value in the IP header sent for the test. | ||||
| CtmnxOamLagMeasTmplCtlTestType | 1.3.6.1.4.1.6527.3.1.2.11.10.1.1.17 | TmnxOamActiveMeasProtocol | RC | |
column · TmnxOamActiveMeasProtocol · read-create · current The value of tmnxOamLagMeasTmplCtlTestType specifies the Active Measurement Protocol used for the test. | ||||
| TtmnxOamLagMeasIfResTable | 1.3.6.1.4.1.6527.3.1.2.11.10.2 | NA | ||
table · not-accessible · current tmnxOamLagMeasIfResTable contains LAG Measurement test status for router interfaces hosting the tests. | ||||
| RtmnxOamLagMeasIfResEntry | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1 | NA | ||
row · not-accessible · current tmnxOamLagMeasIfResEntry contains LAG Measurement test status for one
router interface.
A row is created by SROS when a set of LAG Measurement tests (one test
per LAG member) is started on the specified router interface.
A row is destroyed by SROS when:
a) The row's virtual router and/or router interface is deleted, or
b) The parent test is destroyed by deleting the interface's reference
to the LAG Measurement template.
The full set of results tables for LAG Measurement tests:
tmnxOamLagMeasIfResTable
tmnxOamLagMeasPortResTable
tmnxOamLagMeasSwResTable
| ||||
| CtmnxOamLagMeasIfResSrcIpAssigned | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLagMeasIfResSrcIpAssigned indicates whether the
source IP address used by the set of LAG Measurement tests on the
specified router interface:
1. Was assigned by SROS ('true(1)'), or
2. Was user-configured ('false(2)'), or
3. Is unknown ('false(2)'). | ||||
| CtmnxOamLagMeasIfResSrcIpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLagMeasIfResSrcIpAddrType indicates the address type of tmnxOamLagMeasIfResSrcIpAddr. | ||||
| CtmnxOamLagMeasIfResSrcIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.3 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLagMeasIfResSrcIpAddr indicates the value in the
IP Source Address field of packets sent for the test.
The address may be
a) Configured using
TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4SrcAddr or
TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6SrcAddr
OR
b) Assigned by SROS (see tmnxOamLagMeasIfResSrcIpAssigned)
OR
c) Unknown (i.e. tmnxOamLagMeasIfResSrcIpAddrType = unknown(0)). | ||||
| CtmnxOamLagMeasIfResDstIpAssigned | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLagMeasIfResDstIpAssigned indicates whether the
destination IP address used by the set of LAG Measurement tests on the
specified router interface:
1. Was assigned by SROS ('true(1)'), or
2. Was user-configured ('false(2)'), or
3. Is unknown ('false(2)'). | ||||
| CtmnxOamLagMeasIfResDstIpAddrType | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The value of tmnxOamLagMeasIfResDstIpAddrType indicates the address type of tmnxOamLagMeasIfResDstIpAddr. | ||||
| CtmnxOamLagMeasIfResDstIpAddr | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.6 | InetAddress (SIZE (0 | 4 | 16)) | RO | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-only · current The value of tmnxOamLagMeasIfResDstIpAddr indicates the value in the
IP Destination Address field of packets sent for the test.
The address may be
a) Configured using
TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4DstAddr or
TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6DstAddr
OR
b) Assigned by SROS (see tmnxOamLagMeasIfResDstIpAssigned)
OR
c) Unknown (i.e. tmnxOamLagMeasIfResDstIpAddrType = unknown(0)). | ||||
| CtmnxOamLagMeasIfResSrcUdpPort | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.7 | InetPortNumber | RO | |
column · InetPortNumber · read-only · current The value of tmnxOamLagMeasIfResSrcUdpPort indicates the source UDP port used by LAG Measurement tests on this interface. Zero is returned if no source UDP port is used. | ||||
| CtmnxOamLagMeasIfResOperState | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.8 | ServiceOperStatus | RO | |
column · ServiceOperStatus · read-only · current The value of tmnxOamLagMeasIfResOperState indicates the operational state of the LAG Measurement tests on this interface. 'up(1)' is returned iff at least one test is attempting to transmit packets. See the DESCRIPTION clause for tmnxOamLagMeasIfResFailureCond for conditions leading to 'down(2)'. | ||||
| CtmnxOamLagMeasIfResFailureCond | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.9 | Bits | RO | |
column · Bits · read-only · current The value of tmnxOamLagMeasIfResFailureCond indicates the reason(s)
why this interface's LAG Measurement operational state is down (i.e.
tmnxOamLagMeasIfResOperState = 'down(2)').
Code points:
noProtocol
IPv4 AND IPv6 transmission of packets is administratively
disabled on the interface.
See
TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv4AdminState and
TIMETRA-VRTR-MIB::vRtrIfLnkDlyTwampIpv6AdminState.
templateAdminDown
The interface's LAG Measurement template is administratively
disabled. See tmnxOamLagMeasTmplCtlAdminState.
udpPortUnavailable
A source UDP port could not be allocated for the LAG Measurement
tests. See tmnxOamLagMeasIfResSrcUdpPort.
internalError
An internal error, e.g. a memory allocation failure.
interfaceNotLag
A LAG Measurement template is assigned to a non-LAG interface.
When tmnxOamLagMeasIfResOperState = 'up(1)', the empty set is
returned.
| ||||
| CtmnxOamLagMeasIfResDetctbleTxErr | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLagMeasIfResDetctbleTxErr indicates a detectable
error in LAG Measurement transmission.
none (1) No transmission failure detected
interfaceDown (2) The IP interface associated with the LAG
Measurement test is operationally down or
administratively disabled
unexpectedError (3) Transmission failed due to unexpected
conditions, such as failed memory allocation,
traffic congestion, or failure to obtain
necessary resources
noRoute (4) There is no IP route to the destination
address from this interface
sourceIpNotLocal (5) The source IP address is not local
invalidDestIp (6) The destination IP address is invalid
invalidInterfaceType (7) The interface is not a supported type
sameSourceIpDestIp (8) The source and destination IP are the same,
creating an invalid transmission condition.
| ||||
| CtmnxOamLagMeasIfResStampSSID | 1.3.6.1.4.1.6527.3.1.2.11.10.2.1.11 | Unsigned32 (0 | 1..65535) | RO | |
column · Unsigned32 (0 | 1..65535) · read-only · current The value of tmnxOamLagMeasIfResStampSSID indicates the STAMP Session
Identifier (SSID) shared by the STAMP microsessions belonging to the
specified interface.
Zero indicates an SSID is not available.
For example:
1. The interface does not have an active microsession (e.g.
tmnxOamLagMeasTmplCtlAdminState = disabled(2)), or
2. The interface's LAG Measurement template has the wrong type (i.e.
tmnxOamLagMeasTmplCtlTestType = twampLight(1)). | ||||
| TtmnxOamLagMeasPortResTable | 1.3.6.1.4.1.6527.3.1.2.11.10.3 | NA | ||
table · not-accessible · current tmnxOamLagMeasPortResTable contains LAG Measurement test results for each LAG member. | ||||
| RtmnxOamLagMeasPortResEntry | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1 | NA | ||
row · not-accessible · current tmnxOamLagMeasPortResEntry contains LAG Measurement test results for
one LAG member.
A row is created by SROS when a LAG Measurement test is started, and
an active member is found within the test's LAG.
A row is destroyed by SROS when:
a) The row's virtual router, interface, LAG, and/or port is deleted, or
b) The parent test is destroyed by deleting the interface's reference
to the LAG Measurement template.
The full set of results tables for LAG Measurement tests:
tmnxOamLagMeasIfResTable
tmnxOamLagMeasPortResTable
tmnxOamLagMeasSwResTable
| ||||
| CtmnxOamLagMeasPortResNewestSwIdx | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLagMeasPortResNewestSwIdx indicates the index of the newest sample window in tmnxOamLagMeasSwResTable for this port (i.e. the highest in-use value of tmnxOamLagMeasSwResIndex). Zero indicates no sample window results are present for this port. | ||||
| CtmnxOamLagMeasPortResLagMembrLcl | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.2 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The value of tmnxOamLagMeasPortResLagMembrLcl indicates the local LAG member identifier, as loaded into the Sender Micro-session ID field of each launched packet. | ||||
| CtmnxOamLagMeasPortResLagMembrRmt | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.3 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The value of tmnxOamLagMeasPortResLagMembrRmt indicates the remote LAG member identifier, as learned from the Reflector Micro-session ID field of received packets. | ||||
| CtmnxOamLagMeasPortResRmtRenumber | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasPortResRmtRenumber indicates the number of changes to tmnxOamLagMeasPortResLagMembrRmt seen during the life of the test on this port. In the typical case, zero is returned. | ||||
| CtmnxOamLagMeasPortResDiscRflZero | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasPortResDiscRflZero indicates the number of reflected TWAMP-Light packets discarded because of an unexpected zero in the 'Reflector Micro-session ID' field. | ||||
| CtmnxOamLagMeasPortResDiscSndZero | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasPortResDiscSndZero indicates the number of reflected TWAMP-Light packets discarded because of an unexpected zero in the 'Sender Micro-session ID' field. | ||||
| CtmnxOamLagMeasPortResDiscSndMism | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasPortResDiscSndMism indicates the number of reflected TWAMP-Light packets discarded because of an unexpected non-zero value in the 'Sender Micro-session ID' field. | ||||
| CtmnxOamLagMeasPortResDetectTxErr | 1.3.6.1.4.1.6527.3.1.2.11.10.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLagMeasPortResDetectTxErr indicates an error that
is currently blocking the transmission of test packets on the
specified port.
none (1) No transmission failure detected.
unexpectedError (2) Transmission failed due to unexpected
conditions, such as failed memory allocation,
traffic congestion, or failure to obtain
necessary resources.
portDown (3) The specified port is operationally down or
administratively disabled.
| ||||
| TtmnxOamLagMeasSwResTable | 1.3.6.1.4.1.6527.3.1.2.11.10.4 | NA | ||
table · not-accessible · current tmnxOamLagMeasSwResTable contains LAG Measurement test results for sample windows. | ||||
| RtmnxOamLagMeasSwResEntry | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1 | NA | ||
row · not-accessible · current tmnxOamLagMeasSwResEntry contains LAG Measurement test results for one
sample window.
A row is created by SROS when a sample window is created.
A row is destroyed by SROS when
a) The row's virtual router, interface, LAG, and/or port is deleted, or
b) The parent test is destroyed by deleting the interface's reference
to the LAG Measurement template, or
c) The limit on the number of sample windows retained per port (i.e.
50) is met, and a new sample window must be created. In that case,
the row for the port's oldest sample window is destroyed.
The full set of results tables for LAG Measurement tests:
tmnxOamLagMeasIfResTable
tmnxOamLagMeasPortResTable
tmnxOamLagMeasSwResTable | ||||
| CtmnxOamLagMeasSwResIndex | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The value of tmnxOamLagMeasSwResIndex specifies the sample window index for the row. At most 50 indices (e.g. 51..100) are present at a time. | ||||
| CtmnxOamLagMeasSwResWindowEndUTC | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.2 | DateAndTime (SIZE (8)) | RO | |
column · DateAndTime (SIZE (8)) · read-only · current The value of tmnxOamLagMeasSwResWindowEndUTC indicates the time (UTC) when this sample window closed. 1970-01-01 00:00:00.0 is returned if this sample window is in progress. | ||||
| CtmnxOamLagMeasSwResState | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxOamLagMeasSwResState indicates whether this sample
window has ended ('complete'), is in progress ('inProg'), or the
window was interrupted and discarded because administrative changes
were detected during transmission ('discard').
| ||||
| CtmnxOamLagMeasSwResFrameCountTx | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasSwResFrameCountTx indicates the number of packets sent for this sample window.
| ||||
| CtmnxOamLagMeasSwResFrameCountRx | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasSwResFrameCountRx indicates the number of packets received for this sample window.
| ||||
| CtmnxOamLagMeasSwResRtFlr | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.6 | Integer32 (-1 | 0..100000) | RO | |
column · Integer32 (-1 | 0..100000) · read-only · current The value of tmnxOamLagMeasSwResRtFlr indicates the round trip Frame
Loss Ratio (FLR) for this sample window.
Negative one indicates no FLR is available.
For example:
1. The sample window is still running, or
2. The number of frames transmitted (i.e.
tmnxOamLagMeasSwResFrameCountTx) is zero.
| ||||
| CtmnxOamLagMeasSwResFdRtMin | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLagMeasSwResFdRtMin indicates the minimum of the series of round trip frame delay measurements calculated during this sample window. Zero indicates no minimum round trip frame delay measurement is available. For example: 1. The sample window is still running, or 2. The sample window had zero successful round trips.
| ||||
| CtmnxOamLagMeasSwResFdRtMax | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLagMeasSwResFdRtMax indicates the maximum of the series of round trip frame delay measurements calculated during this sample window. Zero indicates no maximum round trip frame delay measurement is available. For example: 1. The sample window is still running, or 2. The sample window had zero successful round trips.
| ||||
| CtmnxOamLagMeasSwResFdRtAvg | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxOamLagMeasSwResFdRtAvg indicates the average of the series of round trip frame delay measurements calculated during this sample window. Zero indicates no average round trip frame delay measurement is available. For example: 1. The sample window is still running, or 2. The sample window had zero successful round trips.
| ||||
| CtmnxOamLagMeasSwResFdRtNegative | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tmnxOamLagMeasSwResFdRtNegative indicates whether or not a negative (or zero) round trip frame delay was computed during this sample window. The standard round trip delay calculation (using the TWAMP-Light or STAMP timestamps T1, T2, T3, and T4) can yield a negative (or zero) delay when the clock on the remote node jumps ahead while processing an echo request, for example. A response packet containing a negative (or zero) delay is counted as received (for the loss calculation), but is not used for delay calculations. | ||||
| CtmnxOamLagMeasSwResIfdvRtMin | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.11 | TmnxOamStatPositiveOrEmpty | RO | |
column · TmnxOamStatPositiveOrEmpty · read-only · current The value of tmnxOamLagMeasSwResIfdvRtMin indicates the minimum of the series of round trip Inter-Frame Delay Variation (IFDV) measurements calculated during this sample window. Negative 1 indicates no minimum IFDV is available. For example: 1. The sample window is still running, or 2. The sample window had zero or one successful round trips.
| ||||
| CtmnxOamLagMeasSwResIfdvRtMax | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.12 | TmnxOamStatPositiveOrEmpty | RO | |
column · TmnxOamStatPositiveOrEmpty · read-only · current The value of tmnxOamLagMeasSwResIfdvRtMax indicates the maximum of the series of round trip Inter-Frame Delay Variation (IFDV) measurements calculated during this sample window. Negative 1 indicates no maximum IFDV is available. For example: 1. The sample window is still running, or 2. The sample window had zero or one successful round trips.
| ||||
| CtmnxOamLagMeasSwResIfdvRtAvg | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.13 | TmnxOamStatPositiveOrEmpty | RO | |
column · TmnxOamStatPositiveOrEmpty · read-only · current The value of tmnxOamLagMeasSwResIfdvRtAvg indicates the average of the series of round trip Inter-Frame Delay Variation (IFDV) measurements calculated during this sample window. Negative 1 indicates no average IFDV is available. For example: 1. The sample window is still running, or 2. The sample window had zero or one successful round trips.
| ||||
| CtmnxOamLagMeasSwResStampUFlagsRx | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasSwResStampUFlagsRx indicates the count of STAMP TLVs with the Unrecognized (U) flag set received from the STAMP Session-Reflector for the specified sample window. | ||||
| CtmnxOamLagMeasSwResStampMFlagsRx | 1.3.6.1.4.1.6527.3.1.2.11.10.4.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tmnxOamLagMeasSwResStampMFlagsRx indicates the count of STAMP TLVs with the Malformed (M) flag set received from the STAMP Session-Reflector for the specified sample window. | ||||
| NtmnxOamTestNotifications | 1.3.6.1.4.1.6527.3.1.3.11 | |||
| NtmnxOamPingNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.11.1 | |||
| NtmnxOamPingNotifications | 1.3.6.1.4.1.6527.3.1.3.11.1.0 | |||
| !tmnxOamPingProbeFailed | 1.3.6.1.4.1.6527.3.1.3.11.1.0.1 | obsolete | ||
notification · obsolete Generated when a probe failure is detected when the corresponding tmnxOamPingCtlTrapGeneration object is set to probeFailure(0) subject to the value of tmnxOamPingCtlTrapProbeFailureFilter. The object tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.
| ||||
| !tmnxOamPingTestFailed | 1.3.6.1.4.1.6527.3.1.3.11.1.0.2 | obsolete | ||
notification · obsolete Generated when a ping test is determined to have failed when the corresponding tmnxOamPingCtlTrapGeneration object is set to testFailure(1). In this instance tmnxOamPingCtlTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.
| ||||
| !tmnxOamPingTestCompleted | 1.3.6.1.4.1.6527.3.1.3.11.1.0.3 | obsolete | ||
notification · obsolete Generated at the completion of a ping test when the corresponding tmnxOamPingCtlTrapGeneration object is set to testCompletion(2).
| ||||
| !tmnxOamPingProbeFailedV2 | 1.3.6.1.4.1.6527.3.1.3.11.1.0.4 | obsolete | ||
notification · obsolete Generated when a probe failure is detected when the corresponding tmnxOamPingCtlTrapGeneration object is set to probeFailure(0) subject to the value of tmnxOamPingCtlTrapProbeFailureFilter. The object tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.
| ||||
| !tmnxOamPingTestFailedV2 | 1.3.6.1.4.1.6527.3.1.3.11.1.0.5 | obsolete | ||
notification · obsolete Generated when a ping test is determined to have failed when the corresponding tmnxOamPingCtlTrapGeneration object is set to testFailure(1). In this instance tmnxOamPingCtlTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.
| ||||
| !tmnxOamPingTestCompletedV2 | 1.3.6.1.4.1.6527.3.1.3.11.1.0.6 | obsolete | ||
notification · obsolete Generated at the completion of a ping test when the corresponding tmnxOamPingCtlTrapGeneration object is set to testCompletion(2).
| ||||
| !tmnxAncpLoopbackTestCompleted | 1.3.6.1.4.1.6527.3.1.3.11.1.0.7 | |||
notification · current This Notification is sent whenever a ANCP loopback is finished for which a notification was explicitly requested.
| ||||
| !tmnxOamPingProbeFailedV3 | 1.3.6.1.4.1.6527.3.1.3.11.1.0.8 | |||
notification · current [CAUSE] The tmnxOamPingProbeFailedV3 notification is sent at the end
of an OAM or SAA ping test run, when a sufficient number of successive
probes failed.
The notification is sent if both of the following conditions are met:
1. The 'probeFailure(0)' bit of the tmnxOamPingCtlTrapGeneration BITS
object is enabled, AND
2. The test run includes at least one occurrence of N successive probe
failures, where N is configured using
tmnxOamPingCtlTrapProbeFailureFilter.
This notification is sent at most once per test run.
[EFFECT] Informational. The probe failures may indicate a problem with
live traffic flow.
[RECOVERY] Investigate the cause of the probe failures.
| ||||
| !tmnxOamPingTestFailedV3 | 1.3.6.1.4.1.6527.3.1.3.11.1.0.9 | |||
notification · current [CAUSE] The tmnxOamPingTestFailedV3 notification is sent at the end of
an OAM or SAA ping test run, when a sufficient number of probes
failed.
The notification is sent if both of the following conditions are met:
1. The 'testFailure(1)' bit of the tmnxOamPingCtlTrapGeneration BITS
object is enabled, AND
2. The test run had at least N probe failures, where N is configured
using tmnxOamPingCtlTrapTestFailureFilter.
This notification is sent at most once per test run.
[EFFECT] Informational. The probe failures may indicate a problem with
live traffic flow.
[RECOVERY] Investigate the cause of the probe failures.
| ||||
| !tmnxOamPingTestCompletedV3 | 1.3.6.1.4.1.6527.3.1.3.11.1.0.10 | |||
notification · current [CAUSE] The tmnxOamPingTestCompletedV3 notification is sent at the end of an OAM or SAA ping test run (if the 'testCompletion(2)' bit of the corresponding tmnxOamPingCtlTrapGeneration object is enabled). [EFFECT] Informational. If the test run failed (e.g. the number of probes received is less than the number of probes sent), there may be a corresponding problem with live traffic flow. [RECOVERY] If the test run failed, investigate the cause.
| ||||
| NtmnxOamTraceRouteNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.11.2 | |||
| NtmnxOamTraceRouteNotifications | 1.3.6.1.4.1.6527.3.1.3.11.2.0 | |||
| !tmnxOamTrPathChange | 1.3.6.1.4.1.6527.3.1.3.11.2.0.1 | |||
notification · current The path to a target has changed. | ||||
| !tmnxOamTrTestFailed | 1.3.6.1.4.1.6527.3.1.3.11.2.0.2 | |||
notification · current [CAUSE] The tmnxOamTrTestFailed notification is sent when an OAM or SAA trace test run failed (if the 'testFailure(1)' bit of the corresponding tmnxOamTrCtlTrapGeneration object is enabled). This notification is sent at most once per test run. [EFFECT] Informational. The test run failure may indicate a problem with the corresponding live traffic flow. [RECOVERY] Investigate the cause of the test run failure. | ||||
| !tmnxOamTrTestCompleted | 1.3.6.1.4.1.6527.3.1.3.11.2.0.3 | |||
notification · current [CAUSE] The tmnxOamTrTestCompleted notification is sent at the end of an OAM or SAA trace test run (if the 'testCompletion(2)' bit of the corresponding tmnxOamTrCtlTrapGeneration object is enabled). [EFFECT] Informational. If the test run failed (e.g. a probe timed out), there may be a corresponding problem with live traffic flow. [RECOVERY] If the test run failed, investigate the cause. | ||||
| !tmnxOamLdpTtraceAutoDiscState | 1.3.6.1.4.1.6527.3.1.3.11.2.0.4 | |||
notification · current The tmnxOamLdpTtraceAutoDiscState notification is generated when the discovery state of the 'background LDP Tree Trace entity' represented by tmnxOamLTtraceAutoDiscoveryState has been changed. | ||||
| !tmnxOamLdpTtraceFecProbeState | 1.3.6.1.4.1.6527.3.1.3.11.2.0.5 | |||
notification · current The tmnxOamLdpTtraceFecProbeState notification is generated when the probe state of the 'auto discovered FEC' has been changed. | ||||
| !tmnxOamLdpTtraceFecDisStatus | 1.3.6.1.4.1.6527.3.1.3.11.2.0.6 | |||
notification · current The tmnxOamLdpTtraceFecDisStatus notification is generated when the discovery status BITS or the number of discovered paths of the 'auto discovered FEC' has been changed. Note that the changes are evaluated at the end of a FEC discovery. | ||||
| !tmnxOamLdpTtraceFecPFailUpdate | 1.3.6.1.4.1.6527.3.1.3.11.2.0.7 | |||
notification · current The tmnxOamLdpTtraceFecPFailUpdate notification is generated when there is a probe state change in any of the relevant discovered paths while the overall FEC probe state, tmnxOamLTtraceFecProbeState is in 'partially failed' state. | ||||
| NtmnxOamSaaNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.11.3 | |||
| NtmnxOamSaaNotifications | 1.3.6.1.4.1.6527.3.1.3.11.3.0 | |||
| !tmnxOamSaaThreshold | 1.3.6.1.4.1.6527.3.1.3.11.3.0.1 | |||
notification · current [CAUSE] A tmnxOamSaaThreshold notification is a Threshold Crossing Alert (TCA). The TCA is generated at the end of an SAA test run when a traffic statistic (e.g. round trip latency) crosses a configured threshold. An SAA threshold is configured using tmnxOamSaaTThreshold. [EFFECT] If the TCA is 'rising(1)', the test run results may indicate a problem with the corresponding customer traffic. If the TCA is 'falling(2)', the TCA indicates an improvement in the test run results. [RECOVERY] Investigate the cause of the latency, loss, or jitter problem. | ||||
| NtmnxOamDiagNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.11.6 | |||
| NtmnxOamDiagNotifications | 1.3.6.1.4.1.6527.3.1.3.11.6.0 | |||
| !tmnxOamDiagTestCompleted | 1.3.6.1.4.1.6527.3.1.3.11.6.0.1 | |||
notification · current [CAUSE] A tmnxOamDiagTestCompleted trap is generated at the end of every diagnostic test run. A diagnostic test is configured using tmnxOamDiagCtlTable. tmnxOamDiagCtlTestMode indicates the type of the diagnostic test (e.g. 'findEgressDiag(1)'). tmnxOamTestRunIndex indicates the run number of the completed diagnostic test run. For example, the second run of a test with owner 'owner_A' and test 'test_Z' has tmnxOamTestRunIndex=2. [EFFECT] The result of the test run can be read (e.g. from the indicated row in tmnxOamFindEgrDiagResultsTable). [RECOVERY] No recovery is required. | ||||
Textual conventions
TmnxOamActiveMeasProtocolINTEGERstamp(2)twampLight(1)A value of type TmnxOamActiveMeasProtocol specifies the Active Measurement Protocol (AMP) used for a test. Code points: twampLight(1) - the test uses the TWAMP-Light protocol specified in RFC 5357, Appendix I. stamp(2) - the test uses the STAMP protocol specified in RFC 8762, RFC 8972, and RFC 9503.TmnxOamAddressTypeINTEGERipv4Address(1)ipv4Unnumbered(7)ipv6Address(2)ipv6Unnumbered(8)localCpu(6)macAddress(3)networkInterface(11)nonIp(10)sapId(4)sdpBindId(9)sdpId(5)unknown(0)A value of type TmnxOamAddressType is an enumerated integer that indicates the type of address used in OAM test requests and responses.
TmnxOamBierHistoryReturnCodeUnsigned32 (0..255)An object of type TmnxOamBierHistoryReturnCode indicates the value copied from the Return Code field of a BIER Echo Reply PDU. Code points include (but are not restricted to) the following. Value Interpretation ----- ------------------------------- 0 No return code 1 Malformed Echo Request received 2 One or more of the TLVs was not understood 3 Replying BFR is the only BFER in header Bitstring 4 Replying BFR is one of the BFER in header Bitstring 5 Packet-Forward-Success 6 Invalid Multipath Info Request 7 <not defined> 8 No matching entry in forwarding table. 9 Set-Identifier Mismatch 10 DDMAP Mismatch Zero is returned if a BIER Echo Reply PDU was not received (e.g. if a timeout occurred).
TmnxOamBuildPktHeaderTypeINTEGERcontrolWord(1)dot1q(2)ethernet(3)gre(4)gtpUser(5)ipsecAuth(6)ipv4(7)ipv6(8)ipv6Fragment(9)l2tp(10)mpls(11)none(0)pbb(12)tcp(13)udp(14)An object of type TmnxOamBuildPktHeaderType specifies the type of a packet header used by the OAM Egress Finder. Abbreviations DOT1Q: IEEE 802.1Q GPRS: General Packet Radio Service GRE: Generic Routing Encapsulation GTP: GPRS Tunneling Protocol L2TP: Layer 2 Tunneling Protocol PBB: Provider Backbone Bridge
TmnxOamIcmpOrigDatagramHdrTypeINTEGERipV6Header(1)segmentRoutingHeader(2)A value of type TmnxOamIcmpOrigDatagramHdrType indicates the type of a header within an Original Datagram field within an ICMP response. Values: ipV6Header(1) An IPv6 header (RFC 8200). segmentRoutingHeader(2) A Segment Routing Header (SRH; RFC 8754). RFC 8754 defines an SRH as IPv6 only.TmnxOamLTtraceDisStatusBitsBitsmaxHop(2)maxPath(1)noResource(4)timeout(0)unexploredPath(3)A value of type TmnxOamLTtraceDisStatusBits indicates the status of an LDP tree trace discovery. Code points: timeout (0) - one or more trace requests for an IP address FEC timed out maxPath (1) - reached the maximum allowed path limit for an IP address FEC maxHop (2) - reached the maximum allowed hop limit unexploredPath (3) - could not discover all possible paths noResource (4) - the internal resources required to complete the discovery were unavailableTmnxOamLspAssocChannelINTEGERipv4(4)nonIp(2)none(3)notApplicable(1)A value of type TmnxOamLspAssocChannel specifies the launched echo request's usage of the Associated Channel (ACH) mechanism, when testing an MPLS-TP LSP. Values: notApplicable(1) Used when the test is not testing an MPLS-TP LSP. nonIp(2) Use the Associated Channel mechanism described in RFC 6426, Section 3.3. none(3) Do not use an Associated Channel, as described in RFC 6426, Section 3.1. ipv4(4) Use the Associated Channel mechanism described in RFC 6426, Section 3.2.TmnxOamLspPingTestSubModeINTEGERbgpLabeledPrefix(3)ldp(9)rsvpTe(10)srIsis(4)srOspf(5)srOspf3(8)srPolicy(7)srTe(6)static(2)unspecified(1)A value of type TmnxOamLspPingTestSubMode specifies the sub-type of the LSP ping test. LSP test types: unspecified(1) The test's sub-type is not configured. Deprecated usage: LDP and RSVP-TE lsp-ping tests use unspecified(1) under some circumstances, for backward compatibility. ldp(9) and rsvpTe(10) are the preferred code points. static(2) Deprecated. Perform an LSP ping test using the RFC 6426 'Target FEC Stack' code point 'Static LSP'. bgpLabeledPrefix(3) Perform an LSP ping test using the RFC 4379 'Target FEC Stack' code point 'BGP labeled IPv4 prefix'. In future, 'bgpLabeledPrefix(3)' will also be used for the RFC 4379 'Target FEC Stack' code point 'BGP labeled IPv6 prefix'. srIsis(4) Perform an LSP ping test in the Segment Routing (SR) case, where the Interior Gateway Protocol (IGP) is Intermediate System to Intermediate System (IS-IS). srOspf(5) Perform an LSP ping test in the Segment Routing (SR) case, where the Interior Gateway Protocol (IGP) is Open Shortest Path First (OSPF). srTe(6) Perform an LSP ping test in the Segment Routing Traffic Engineering (SR-TE) case. srPolicy(7) Perform an LSP ping test using a Segment Routing policy. srOspf3(8) Perform an LSP ping test in the SR case, where the IGP is OSPFv3. ldp(9) Perform an LSP ping test using the RFC 4379 'Target FEC Stack' code point 'LDP IPv4 prefix'. rsvpTe(10) Perform an LSP ping test using the RFC 4379 'Target FEC Stack' code point 'RSVP IPv4 LSP'.TmnxOamLspTrTestSubModeINTEGERbgpLabeledPrefix(3)srIsis(4)srOspf(5)srOspf3(8)srPolicy(7)srTe(6)static(2)unspecified(1)A value of type TmnxOamLspTrTestSubMode specifies the type of LSP trace route test to perform. LSP test types: static(2) Deprecated. Perform an LSP trace route test using the RFC 6426 'Target FEC Stack' code point 'Static LSP'. bgpLabeledPrefix(3) Perform an LSP trace route test using the RFC 4379 'Target FEC Stack' code point 'BGP labeled IPv4 prefix'. In future, 'bgpLabeledPrefix(3)' will also be used for the RFC 4379 'Target FEC Stack' code point 'BGP labeled IPv6 prefix'. srIsis(4) Perform an LSP trace route test in the Segment Routing (SR) case, where the Interior Gateway Protocol (IGP) is Intermediate System to Intermediate System (IS-IS). srOspf(5) Perform an LSP trace route test in the Segment Routing (SR) case, where the Interior Gateway Protocol (IGP) is Open Shortest Path First (OSPF). srTe(6) Perform an LSP trace route test in the Segment Routing Traffic Engineering (SR-TE) case. srPolicy(7) Perform an LSP trace route test using a Segment Routing policy. srOspf3(8) Perform an LSP trace route test in the SR case, where the IGP is OSPFv3. unspecified(1) Perform any other supported type of LSP trace route test. Examples: an LSP ping or trace route test using the RFC 4379 'Target FEC Stack' code point 'LDP IPv4 prefix'; an LSP ping or trace route test using the RFC 4379 'Target FEC Stack' code point 'RSVP IPv4 LSP'.TmnxOamMplsEchoDownMapTlvINTEGERddmap(2)dsmap(1)An object of type TmnxOamMplsEchoDownMapTlv specifies the type of downstream mapping TLV in an MPLS echo request PDU. 'dsmap(1)' specifies the Downstream Mapping TLV, as described in RFC 4379, Section 3.3. 'ddmap(2)' specifies the Downstream Detailed Mapping TLV, as described in RFC 6424, Section 3.3.
TmnxOamMplsEchoDownMapTlvOrNoneINTEGERddmap(2)dsmap(1)none(3)An object of type TmnxOamMplsEchoDownMapTlvOrNone specifies the type of downstream mapping TLV in an MPLS echo request PDU (or no downstream mapping TLV). 'dsmap(1)' specifies the Downstream Mapping TLV, as described in RFC 4379, Section 3.3. 'ddmap(2)' specifies the Downstream Detailed Mapping TLV, as described in RFC 6424, Section 3.3. 'none(3)' specifies none of the above TLVs.
TmnxOamMplsTpPathTypeINTEGERactive(3)protect(2)working(1)A value of type TmnxOamMplsTpPathType specifies the type of an MPLS-TP path to be tested. Path types: working(1) - test the primary path of the MPLS-TP LSP protect(2) - test the secondary path of the MPLS-TP LSP active(3) - test the currently active path of the MPLS-TP LSP
TmnxOamPingRtnCodeINTEGERdownstream(4)downstreamMismatched(11)downstreamNotInMfib(10)downstreamNotLabel(5)downstreamNotMac(6)downstreamNotMacFlood(7)fecEgress(1)fecNoMap(2)fecStackChange(18)malformedEchoRequest(8)noLabelAtStackDepth(14)noMplsFwd(13)notApplicable(0)notDownstream(3)protoIntfMismatched(15)seeDDMapForRetCodeSubCode(17)terminatedByOneLabel(16)tlvNotUnderstood(9)upstreamIfIdUnkn(12)A value of type TmnxOamPingRtnCode is an enumerated integer that indicates the return code received in the OAM ping response common header. Code points: notApplicable The return code has no significance in the context of the test being conducted. fecEgress Replying router is an egress for the Forwarding Equivalence Class (FEC). fecNoMap Replying router has no mapping for the FEC. notDownstream Replying router is not one of the downstream routers. downstream Replying router is one of the downstream routers and its mapping for this FEC on the received interface is the given label. downstreamNotLabel Replying router is one of the downstream routers but its mapping for this FEC is not the given label. downstreamNotMac Replying router is one of the downstream routers but it does not have the given MAC address downstreamNotMacFlood Replying router is one of the downstream routers but it does not have the given MAC address and is unable to flood the request. malformedEchoRequest A malformed echo request was received. tlvNotUnderstood One or more of the TLVs was not understood. downstreamNotInMfib Replying router is one of the downstream routers but it does not have an MFIB entry for the given source group combination. downstreamMismatched Downstream mapping mismatched. upstreamIfIdUnkn Upstream interface index unknown. noMplsFwd Label switched but no MPLS forwarding at stack-depth. noLabelAtStackDepth No label entry at stack-depth. protoIntfMismatched Protocol not associated with interface at FEC stack-depth. terminatedByOneLabel Premature termination of ping due to label stack shrinking to a single label. seeDDMapForRetCodeSubCode See DDMap TLV for rc and sub-rc. fecStackChange Label switched with FEC stack change.TmnxOamResponseStatusINTEGERadminDownOrigSdpBind(117)adminDownOrigSdpId(126)adminDownOrigSvc(124)adminDownRespSdpBind(119)adminDownRespSdpId(127)adminDownRespSvc(125)ancpMaxNbrAncpTestsInProgress(85)ancpNoAccessNodeforAncpString(82)ancpNoAncpCapabilityNegotiated(83)ancpNoAncpString(79)ancpNoAncpStringForSubscriber(81)ancpNoSubscriber(80)ancpOtherTestInProgress(84)bgpDaemonBusy(45)bgpLabelPrefixIsLocal(152)bgpLabelPrefixUnknown(153)bierError(189)bindSocketFail(60)changedResponderId(24)controlWordNotValid(142)destMacResolveFail(173)dnsLookupFail(74)dnsNameNotFound(50)dnsServerResponseFormErr(109)dnsServerResponseNotImp(111)dnsServerResponseRefused(112)dnsServerResponseServFail(110)dnsServerUnexpectedResponse(108)downLspPath(37)downOrigSdpBinding(33)downOrigSdpId(7)downOrigSvcId(25)downOriginatorId(22)downRespSdpId(12)downRespSvcId(26)downResponderId(23)downServiceSdp(15)ethCfmSlmInLoss(102)ethCfmSlmOutLoss(103)ethCfmSlmUnacknowledged(104)ethCfmUnsupportedTestType(187)farEndUnreachable(21)farEndVccvNotSupported(70)forceOptionIsBlocked(147)greEthBrdgdDelvryTypeUnsupported(177)greOverIpv6NoSupport(197)gtpPingCleanUpInProg(99)gtpPingDupRequest(98)gtpPingError(96)gtpPingRsrcUnavailable(97)hostUnreachable(151)internalError(3)intfForLspPathIsNotOperational(148)invalidControlPlaneOption(134)invalidHostAddress(17)invalidIgpInstance(195)invalidInterface(100)invalidLspId(36)invalidLspLabel(39)invalidLspName(19)invalidLspPathName(34)invalidLspProtocol(38)invalidMacAddress(18)invalidMepId(93)invalidOriginatorId(9)invalidRespServiceId(116)invalidResponderId(10)invalidRouterInstance(193)invalidSdp(14)invalidServiceId(13)invalidSourceMacOption(136)invalidStaticMplsTpLsp(141)invalidTargetFecType(161)invalidVirtualRouterId(129)iomRevisionNotSupported(135)ipDestAndNextHopComboUnsupported(183)ipPrefixInvalid(188)ipPrefixIsLocal(175)ipPrefixUnknown(176)ipv4SdpFarEndsOnly(163)ipv6SdpFarEndsNotSupported(167)ipv6TunneledNextHopUnsupported(179)l2tpv3DeliveryTypeUnsupported(155)ldpPrefixIsLocal(130)ldpPrefixUnknown(154)localExtranetRoute(42)mTraceNoSGFlow(47)mTraceSourceIsNotRemote(128)mTraceSysIpNotCfg(48)macIsLocal(20)maxConcurrentLimitReached(4)mcastNotEnabled(46)minimumPacketSizeNotMet(160)mismatchCustId(28)mismatchSvcLabel(31)mismatchSvcMtu(30)mismatchSvcType(29)mplsTpLspPathNotOperational(140)mplsTpLspPathShutdown(146)msPwInvalidReplyMode(78)mtrace2Disabled(178)mtrace2OperDown(194)mtraceNotSupportedP2mp(106)multipathNotSupported(76)multipleReplies(94)networkUnreachable(150)nextHopIpIsLocal(132)nextHopIpIsSubnet(182)nexthopUnreachable(67)nhAddrTypeMismatch(192)nhIntfNameNotFound(77)noDirectInterface(66)noFwdEntryInMfib(49)noIntf(62)noIpv6SrcAddrOnIntf(75)noLocalIp(63)noLspEndpointAddr(35)noMsPwVccvInReplyDir(87)noRouteByIntf(61)noRouteToDest(41)noSdpBoundToSvc(32)noServiceEgressLabel(16)noServiceIngressLabel(27)noSocket(51)noSpokeSdpInVll(69)noTxPort(171)noVcEgressLabel(71)notSupportedOnVcSwitchService(144)oamTestOverSRTunNotSupported(168)operDownRespSdpBind(118)p2mpLspNameOrInstInvalid(88)p2mpLspNotConfigured(198)p2mpLspNotFound(101)p2mpLspNotOperational(91)p2mpLspPingNotSupportedOnMgmtRtr(162)p2mpLspPingRsvpLspTypeNoSupport(196)p2mpLspS2LAddressInvalid(90)p2mpLspS2LPathDown(89)p2mpLspTrMultipleReplies(92)packetSizeTooBig(95)parentAdminDown(172)pathDestAddrTypeMismatch(190)pwPathIdNotConfigured(143)rcvdWrongSize(73)rcvdWrongType(65)requestTerminated(8)requestTimedOut(5)resolvedIpDstSrcComboUnsupported(184)responseReceived(1)routeIsLocal(40)sdpBindTypeMismatch(121)sdpBindVcTypeMismatch(122)sdpBindVcidMismatch(120)sdpBindVlanVcTagMismatch(123)sdpFarEndNotSupported(145)sendFailEvpnCfgdPbbService(169)sendFailEvpnCfgdService(158)sendFailSpbMgdService(137)sendFailSubnettedService(115)sendFailUndefinedServiceId(113)sendFailWrongServiceType(114)sendFailed(159)sendtoFail(64)socketOptHdrincFail(57)socketOptHwTimeStampFail(68)socketOptIfInexFail(53)socketOptIpSessionFail(72)socketOptMtuDiscFail(55)socketOptNextHopFail(54)socketOptSndbufFail(56)socketOptTosFail(58)socketOptTtlFail(59)socketOptVprnIdFail(52)sourceIpIsNotLocal(131)spokeSdpFecNoBndFound(105)spokeSdpOperDown(86)srPolicyNotFound(185)srPolicyNotFoundForCandidatePath(200)srPolicyPathNotProgrammed(199)srPolicySegmentListNotFound(186)srTeTunneledNextHopUnsupported(181)srTunneledNextHopUnsupported(180)srcAddrTypeMismatch(191)srcIpInBgpVpnRoute(43)srcIpInvalid(44)targetIpIsLocal(133)ttlExpired(149)txPortDown(170)type1Fec129PwNotSupported(139)unknown(2)unknownOrigSdpId(6)unknownRespSdpId(11)useFec129Parameters(107)useStaticPwParameters(138)vPingPeerCcNoCtrlWord(157)vPingPeerCvNoLspPing(156)vxlanEgrBndSvcMismatch(164)vxlanEvpnUnconfigured(166)vxlanIpV6TermUnsupported(174)vxlanNoMatchingTep(165)An object of type TmnxOamResponseStatus indicates the status of an OAM Echo probe operation. responseReceived(1) - Operation completed successfully. unknown(2) - Operation failed due to unknown error. internalError(3) - An implementation detected an error in its own processing that caused an operation to fail. maxConcurrentLimitReached(4) - The maximum number of concurrent active operations would have been exceeded if the corresponding operation was allowed. requestTimedOut(5) - Operation failed to receive a valid reply within the time limit imposed on it. unknownOrigSdpId(6) - Invalid or non-existent originating SDP-ID. downOrigSdpId(7) - The originating SDP-ID is operationally down. requestTerminated(8) - The OAM ping test was terminated by the manager before reply or timeout. invalidOriginatorId(9) - The far-end replied with an invalid originator-ID error. invalidResponderId(10) - The far-end replied with an invalid responder-ID error. unknownRespSdpId(11) - The far-end replied with an invalid response SDP-ID error. downRespSdpId(12) - The far-end replied with down (admin or oper) response SDP-ID. invalidServiceId(13) - Invalid or non-existent originator Service-ID (svc-ping). invalidSdp(14) - Invalid or non-existent SDP for Service (svc-ping). downServiceSdp(15) - SDP for the Service is down. (svc-ping). noServiceEgressLabel(16) - Non-existent Service egress label. (svc-ping). invalidHostAddress(17) - The IP address for a host has been determined to be invalid. Examples of this are broadcast or multicast addresses. (svc-ping). invalidMacAddress(18) - The MAC address specified has been determined to be invalid. (macPing). invalidLspName(19) - The LSP name specified has been determined to be invalid. (lspPing). macIsLocal(20) - MAC Ping or Trace route not sent because the MAC address is on a local SAP or CPU. (MAC-Ping/MAC-TR). farEndUnreachable(21) - No route to the far end of the GRE SDP tunnel. downOriginatorId(22) - The ping originator is operationally down. downResponderId(23) - The ping responder is operationally down. changedResponderId(24) - The ping responder-ID is changed. downOrigSvcId(25) - Service on the originator side is operationally down. (svc-ping). downRespSvcId(26) - Service on the responder side is operationally down. (svc-ping). noServiceIngressLabel(27) - Non-existent service ingress label. (svc-ping). mismatchCustId(28) - Service customer ID mismatch between originator and responder. (svc-ping). mismatchSvcType(29) - Service type mismatch between originator and responder. (svc-ping). mismatchSvcMtu(30) - Service MTU mismatch between originator and responder. (svc-ping). mismatchSvcLabel(31) - Service label mismatch between originator and responder. (svc-ping). noSdpBoundToSvc(32) - No SDP bound to the service. (svc-ping). downOrigSdpBinding(33) - SDP binding is down on the Originator side. (sdp-ping). invalidLspPathName(34) - The LSP path name specified is invalid. (lsp-ping). noLspEndpointAddr(35) - No LSP Endpoint address. (lsp-ping). invalidLspId(36) - No active LSP path found. (lsp-ping). downLspPath(37) - LSP path is operationally down. (lsp-ping). invalidLspProtocol(38) - LSP Protocol is not supported or is invalid. (lsp-ping). invalidLspLabel(39) - LSP label is invalid. (lsp-ping). routeIsLocal(40) - The route is a local route. (vprn-ping). noRouteToDest(41) - There is no route to the destination. (vprn-ping). localExtranetRoute(42) - The route is a local extranet route. (vprn-ping). srcIpInBgpVpnRoute(43) - The source IP belongs to a BGP-VPN route. (vprn-ping). srcIpInvalid(44) - The source IP is invalid or there is no route to the source. (vprn-ping) bgpDaemonBusy(45) - The BGP routing daemon is busy; vprn route target information is not retrievable. (vprn-trace) mcastNotEnabled(46) - Multicast is not enabled. Multicast trace cannot be initiated. (mtrace) mTraceNoSGFlow(47) - No (*,G)/(S,G) flow on the router. Multicast trace cannot be initiated. (mtrace) mTraceSysIpNotCfg(48) - System ip address not configured. It is used as the response address in the multicast trace query. (mtrace) noFwdEntryInMfib(49) - No forwarding entry could be found for the specified source and destination address in the MFIB. (mfib-ping). dnsNameNotFound(50) - The domain name specified in the DNS query does not exist. noSocket(51) - unable to get socket. (icmp-ping). socketOptVprnIdFail(52) - unable to set SO_VPRNID for socket. (icmp-ping). socketOptIfInexFail(53) - unable to set IP_IFINDEX for socket. (icmp-ping). socketOptNextHopFail(54) - unable to set IP_NEXT_HOP for socket. (icmp-ping). socketOptMtuDiscFail(55) - unable to set IP_MTU_DISC for socket. (icmp-ping). socketOptSndbufFail(56) - unable to set SO_SNDBUF for socket. (icmp-ping). socketOptHdrincFail(57) - unable to set IP_HDRINCL for socket. (icmp-ping). socketOptTosFail(58) - unable to set IP_TOS for socket. (icmp-ping). socketOptTtlFail(59) - unable to set IP_TTL for socket. (icmp-ping). bindSocketFail(60) - unable to bind socket. (icmp-ping). noRouteByIntf(61) - no route to destination via the specified interface. (icmp-ping). noIntf(62) - no interface specified. (icmp-ping). noLocalIp(63) - unable to find local IP address. (icmp-ping). sendtoFail(64) - sendto function failed. (icmp-ping). rcvdWrongType(65) - received packet of wrong ICMP type. (icmp-ping). noDirectInterface(66) - no direct interface to reach destination. (icmp-ping). nexthopUnreachable (67) - unable to reach the next-hop. (icmp-ping). socketOptHwTimeStampFail (68) - unable to set IP_TIM_TIME for socket. (icmp-ping). noSpokeSdpInVll (69) - unable to find spoke-sdp given sdp-id:vc-id (vccv-ping). farEndVccvNotSupported (70) - far end does not support the VCCV options. (vccv-ping). noVcEgressLabel (71) - no VC egress label to send vccv-ping. socketOptIpSessionFail (72) - unable to set IP_SESSION for socket. (icmp-ping). rcvdWrongSize(73) - received packet of wrong size. (icmp-ping). dnsLookupFail (74) - DNS lookup failed. (icmp-ping). noIpv6SrcAddrOnIntf (75) - no IPv6 source on the interface (icmp-ping). multipathNotSupported (76) - downstream node does not support multipath. (lsp-trace). nhIntfNameNotFound (77) - Given next-hop interface name not found. (lsp-ping/trace). msPwInvalidReplyMode (78) - MS-PW switching node supports ip-routed reply mode only (vccv-ping). ancpNoAncpString (79) - ANCP string unknown to the system. ancpNoSubscriber (80) - subscriber unknown to the system. ancpNoAncpStringForSubscriber (81) - subscriber has no associated ANCP string. ancpNoAccessNodeforAncpString (82) - no access node is found for the given ANCP string. ancpNoAncpCapabilityNegotiated (83) - ANCP capability not negotiated with the involved DSLAM. ancpOtherTestInProgress (84) - another ANCP test is running for this ANCP string. ancpMaxNbrAncpTestsInProgress (85) - max number of concurrent ANCP tests reached. spokeSdpOperDown (86) - spoke-sdp is operationally down (vccv-ping). noMsPwVccvInReplyDir (87) - Switching node in MS-PW with no VCCV support in echo reply direction. p2mpLspNameOrInstInvalid (88) - P2MP LSP name or instance provided is not valid. p2mpLspS2LPathDown (89) - LSP path to S2L is down. p2mpLspS2LAddressInvalid (90) - One or more S2L address is not valid. p2mpLspNotOperational (91) - P2MP LSP is operationally down. p2mpLspTrMultipleReplies (92) - Probe returned multiple responses. Result may be inconsistent. invalidMepId (93) - The user-configured MEP identifier is not valid. multipleReplies (94) - more than one reply received, when one was expected. packetSizeTooBig (95) - The packet is larger than the network's MTU and cannot be fragmented. For ICMP-ping tests, this results from an ICMPv4 type 3 code 4 or ICMPv6 type 2 message. gtpPingError (96) - General GTP Ping Error. gtpPingRsrcUnavailable (97) - GTP Path management resource unavailable. gtpPingDupRequest (98) - Duplicate request for the same peer. gtpPingCleanUpInProg (99) - GTP Path management clean up in progress. invalidInterface (100) - The egress interface specified does not exist. p2mpLspNotFound (101) - The P2MP-LSP not found given LDP-ID or sender address. ethCfmSlmInLoss(102) - Synthetic Loss Measurement (SLM) probe lost in transit from far-end node to local agent. ethCfmSlmOutLoss(103) - SLM probe lost on transmit from local agent to far-end node. ethCfmSlmUnacknowledged(104) - SLM probe lost but unable to identify loss reason. spokeSdpFecNoBndFound(105) - Spoke-sdp-fec is invalid or has no associated SDP binding yet. mtraceNotSupportedP2mp(106) - mtrace not supported in base routing context when incoming interface is p2mp useFec129Parameters(107) - specify FEC129 parameters for FEC129 PW instead of sdp-id:vc-id dnsServerUnexpectedResponse(108) - nameserver unexpected response. dnsServerResponseFormErr(109) - nameserver responded with FORMERR. dnsServerResponseServFail(110) - nameserver responded with SERVFAIL. dnsServerResponseNotImp(111) - nameserver responded with NOTIMP. dnsServerResponseRefused(112) - nameserver responded with REFUSED. sendFailUndefinedServiceId(113) - The OAM test cannot be performed because the associated service does not exist. sendFailWrongServiceType(114) - The OAM test cannot be performed because the associated service is of the wrong type. sendFailSubnettedService(115) - The OAM test cannot be performed on a service with a specified MAC subnet length. invalidRespServiceId(116) - Invalid or non-existent responder Service-ID. adminDownOrigSdpBind(117) - SDP binding is administratively down on the originator side. operDownRespSdpBind(118) - SDP binding is operationally down on the responder side. adminDownRespSdpBind(119) - SDP binding is administratively down on the responder side. sdpBindVcidMismatch(120) - SDP binding VC ID mismatch between originator and responder. sdpBindTypeMismatch(121) - SDP binding type mismatch between originator and responder. sdpBindVcTypeMismatch(122) - SDP binding VC type mismatch between originator and responder. sdpBindVlanVcTagMismatch(123) - SDP binding VLAN VC tag mismatch between originator and responder. adminDownOrigSvc(124) - Service on the originator side is administratively down. adminDownRespSvc(125) - Service on the responder side is administratively down. adminDownOrigSdpId(126) - The originating SDP-ID is administratively down. adminDownRespSdpId(127) - The responding SDP-ID is administratively down. mTraceSourceIsNotRemote(128) - The multicast trace route test cannot be performed because the source address is not remote. invalidVirtualRouterId(129) - The OAM test cannot be performed because the associated virtual router ID is invalid. ldpPrefixIsLocal(130) - The OAM test cannot be performed because the associated LDP prefix is local to the system. sourceIpIsNotLocal(131) - The OAM test cannot be performed because the associated source address is not local to the system. nextHopIpIsLocal(132) - The OAM test cannot be performed because the associated next hop address is local to the system. targetIpIsLocal(133) - The OAM test cannot be performed because the associated target address is local to the system. invalidControlPlaneOption(134) - The OAM test cannot be performed because the control plane send or receive option is not allowed with the specified service. iomRevisionNotSupported(135) - The OAM test cannot be performed due to a mismatch in supported revision with the provisioned IOMs. invalidSourceMacOption(136) - The OAM test cannot be performed because the source MAC option is not allowed with the specified service. sendFailSpbMgdService(137) - The OAM test cannot be performed on a service which is managed by SPB. useStaticPwParameters(138) - The spoke SDP is configured for static PW. type1Fec129PwNotSupported(139) - The OAM test is not supported on type 1 FEC129 pseudowires. mplsTpLspPathNotOperational(140) - The OAM test cannot be performed because the MPLS-TP LSP path is not operational. invalidStaticMplsTpLsp(141)- The OAM test only supports static MPLS-TP LSPs. controlWordNotValid(142) - The control word for the spoke-sdp is not valid for this OAM test. pwPathIdNotConfigured(143) - The pw-path-id provisioning is not complete. notSupportedOnVcSwitchService(144) - The OAM test is not supported on a vc-switching service. sdpFarEndNotSupported(145) - The OAM test does not support the SDP far end value. mplsTpLspPathShutdown(146) - The MPLS-TP path is currently shutdown. forceOptionIsBlocked(147) - The force option is currently blocked because of the configuration of a related entity. intfForLspPathIsNotOperational(148) - The interface for the LSP path is not operational ttlExpired(149) - The destination could not be reached because the time-to-live (IPv4) or hop limit (IPv6) was too small. This results from an ICMPv4 type 11 code 0 or ICMPv6 type 3 code 0 message. networkUnreachable(150) - The network specified by the destination address is unreachable. This results from an ICMPv4 type 3 code 0 or ICMPv6 type 1 code 0 message. hostUnreachable(151) - The host specified by the destination address is unreachable. This results from an ICMPv4 type 3 code 1 or ICMPv6 type 1 code 3 message. bgpLabelPrefixIsLocal(152) - The OAM test cannot be performed because the associated BGP Label Route prefix is local to the system. bgpLabelPrefixUnknown(153) - The OAM test cannot be performed because the BGP Target FEC prefix entry is not found in the Routing Table. ldpPrefixUnknown(154) - The OAM test cannot be performed because the LDP Target FEC prefix entry is not found in the Routing Table. l2tpv3DeliveryTypeUnsupported(155) - The OAM test cannot be performed because the l2TPv3 delivery type is unsupported. vPingPeerCvNoLspPing(156) - The OAM test cannot be performed because the peer CV bits do not support lsp ping. vPingPeerCcNoCtrlWord(157) - The OAM test cannot be performed because the peer CC bits do not support control word. sendFailEvpnCfgdService(158) - The OAM test cannot be performed on a VPLS service that has EVPN configured. sendFailed(159) - The OAM test cannot send the test packet. minimumPacketSizeNotMet(160) - The OAM test cannot send the test packet as the minimum required packet size exceeds the user supplied packet size. invalidTargetFecType(161) - The OAM test does not support this FEC type. p2mpLspPingNotSupportedOnMgmtRtr(162) - The OAM p2mpLspPing test is not supported on the management router. ipv4SdpFarEndsOnly(163) - The OAM test only supports bindings and SDPs using an IPv4 far end. vxlanEgrBndSvcMismatch(164) - The OAM test cannot send packets to a VXLAN egress binding not owned by the same service as the one sending. vxlanNoMatchingTep(165) - The OAM test can only send to VTEPs that have been configured. vxlanEvpnUnconfigured(166) - The OAM test can only send on a service with EVPN configured. ipv6SdpFarEndsNotSupported(167) - The OAM test does not support bindings and SDPs using an IPv6 far end. oamTestOverSRTunNotSupported(168) - The OAM test is not supported on SR tunnels. sendFailEvpnCfgdPbbService(169) - The OAM test cannot be performed on a VPLS/Epipe service that is associated with a b-vpls that has EVPN configured. txPortDown(170) - The transmit port is operationally down. noTxPort(171) - No transmit port. parentAdminDown(172) - The parent (SPOKE, SAP, service or port) of the MEP is administratively down. destMacResolveFail(173) - Unable to resolve the remote-mepid to a unicast layer2 MAC address. vxlanIpV6TermUnsupported(174) - The OAM test does not support IPv6 tunnel termination points. ipPrefixIsLocal(175) - The OAM test cannot be performed because the associated IP prefix is local to the system. ipPrefixUnknown(176) - The OAM test cannot be performed because the Target FEC prefix entry is not found in the Routing Table. greEthBrdgdDelvryTypeUnsupported(177) - The OAM test cannot be performed because the GRE Ethernet Bridged delivery type is unsupported. mtrace2Disabled(178) - The mtrace2 test cannot be performed because mtrace2 is disabled at the system level. ipv6TunneledNextHopUnsupported(179) - The VPRN ping/trace test has no support for IPv6 tunneled next hops. srTunneledNextHopUnsupported(180) - The VPRN ping/trace test has no support for Segment Routing tunneled next hops. srTeTunneledNextHopUnsupported(181) - The VPRN ping/trace test has no support for Segment Routing Traffic Engineering next hops. nextHopIpIsSubnet(182) - The OAM test cannot be performed because the associated next hop address is a subnet. ipDestAndNextHopComboUnsupported(183) - The IP destination address type and provided next hop type is not a supported combination. resolvedIpDstSrcComboUnsupported(184) - The resolved IP destination address type and provided source address type is not a supported combination. srPolicyNotFound(185) - The SR-POLICY not found given color and endpoint. srPolicySegmentListNotFound(186) - The SR-POLICY's segment list not found given segment list Id. ethCfmUnsupportedTestType(187) - The test type is not valid for the MEP. ipPrefixInvalid(188) - The OAM test cannot be performed because the Target FEC prefix entry is not valid for the test. bierError (189) - The BIER OAM test received a reply with an unsuccessful return code. pathDestAddrTypeMismatch(190) - The path destination address type doesn't match the prefix address type. srcAddrTypeMismatch(191) - The source address type doesn't match the prefix address type. nhAddrTypeMismatch(192) - The next hop address type doesn't match the prefix address type. invalidRouterInstance(193) - a probe cannot be sent because the test's router-instance is invalid. mtrace2OperDown(194) - An mtrace2 probe cannot be sent because mtrace2 is operationally down at the system level. invalidIgpInstance(195) - The OAM test cannot be performed because the IGP instance is not valid for the protocol. p2mpLspPingRsvpLspTypeNoSupport(196) - P2MP LSP Ping not supported on RSVP LSPs of type 'p2mp-lsp'. greOverIpv6NoSupport(197) - The OAM test does not support GRE over IPv6. p2mpLspNotConfigured(198) - The P2MP LSP not configured. srPolicyPathNotProgrammed(199) - The SR-POLICY's path is not programmed. srPolicyNotFoundForCandidatePath(200) - The SR-POLICY is not found for the given color, endpoint and candidate pathTmnxOamSaaThresholdINTEGERinJitter(1)inLatency(7)inLoss(4)noThreshold(0)outJitter(2)outLatency(8)outLoss(5)rtJitter(3)rtLatency(9)rtLoss(6)A value of type TmnxOamSaaThreshold is a enumerated integer that indicates which type of thresholds should be monitored upon completion of an OAM ping test run. When the corresponding threshold is crossed, a tmnxOamSaaThreshold notification will be generated. noThreshold(0) No threshold type is configured. inJitter (1) Monitor the value of jitter calculated for the inbound, one-way, OAM ping responses received for an OAM ping test run. outJitter (2) Monitor the value of jitter calculated for the outbound, one-way, OAM ping requests sent for an OAM ping test run. rtJitter (3) Monitor the value of jitter calculated for the round trip, two-way, OAM ping requests and replies for an OAM ping test run. inLoss (4) Monitor the number of inbound OAM ping responses not received for an OAM ping test run. outLoss (5) Monitor the number of outbound OAM ping requests that could not be sent for an OAM ping test run. rtLoss (6) Monitor the amount of packet loss for a round trip OAM ping test run. inLatency (7) Monitor the average amount of latency of inbound OAM ping responses for an OAM ping test run. outLatency (8) Monitor the average amount of latency of outbound OAM ping requests for an OAM ping test run. rtLatency (9) Monitor the average amount of round trip latency for an OAM ping test run.TmnxOamSignalProtocolINTEGERbgp(2)isis(6)ldp(3)ospf(5)ospf3(7)rsvpTe(4)static(1)unknown(0)A value of type TmnxOamSignalProtocol indicates the type of label signaling protocol used by a router in a specific Layer 2 mapping entry. Code Points unknown - protocol is unknown static - statically configured Label Switched Path (LSP) bgp - Border Gateway Protocol ldp - Label Distribution Protocol rsvpTe - Resource Reservation Protocol, Traffic Engineering ospf - Open Shortest Path First isis - Intermediate System to Intermediate System ospf3 - Open Shortest Path First version 3
TmnxOamStatPositiveOrEmptyInteger32 (-1 | 0..2147483647)A value of type TmnxOamStatPositiveOrEmpty is a numeric statistic, with -1 indicating the statistic is absent.
TmnxOamTestModeINTEGERnotConfigured(0)ping(1)traceroute(2)A value of type TmnxOamTestMode is an enumerated integer that indicates the type of OAM test.
TmnxOamTestResponsePlaneINTEGERcontrolPlane(1)dataPlane(2)none(3)A value of type TmnxOamTestResponsePlane is an enumerated integer that indicates the response plane from which the OAM ping or traceroute response was received.
TmnxOamTestResultINTEGERaborted(3)failed(2)success(1)txResourcesUnavail(4)undetermined(0)A value of type TmnxOamTestResult is an enumerated integer that describes the result of a ping or trace test run. Code points: undetermined (0) The result is, as yet, unknown. success (1) The test was successful. failed (2) The test failed. aborted (3) The test was terminated before completion. txResourcesUnavail(4) The test did not start because transmit resources are unavailable.TmnxOamVcTypeINTEGERmeshSdp(5)spokeSdp(11)An object of type TmnxOamVcType indicates the type of SDP binding associated with a Virtual Circuit (VC).
TmnxOamVccvAssocChannelINTEGERipv4(3)nonIp(2)notApplicable(1)A value of type TmnxOamVccvAssocChannel specifies the launched echo request's usage of the Associated Channel (ACH) mechanism, when performing an MPLS-TP VCCV test. Values: notApplicable(1) Used when the test is not an MPLS-TP VCCV test. nonIp(2) Use the Associated Channel mechanism described in RFC 6426, Section 3.3. ipv4(3) Use the Associated Channel mechanism described in RFC 6426, Section 3.2.TmnxOamVccvPingTestSubModeINTEGERfec128(3)static(2)unspecified(1)A value of type TmnxOamVccvPingTestSubMode specifies the type of VCCV ping test to perform. VCCV test types: static(2) Perform a VCCV ping test using the RFC 6426 'Target FEC Stack' code point 'Static Pseudowire'. fec128(3) Perform an SAA VCCV ping test using the RFC 4379 'Target FEC Stack' code point 'FEC 128 Pseudowire'. unspecified(1) Perform any other supported type of VCCV ping test. For example, a) a non-SAA VCCV ping test using the RFC 4379 'Target FEC Stack' code point 'FEC 128 Pseudowire'. b) an SAA VCCV ping test using the RFC 4379 'Target FEC Stack' code point 'FEC 128 Pseudowire'. This use of 'unspecified(1)' is deprecated. It is currently supported for backward compatibility. c) a test using the RFC 4379 'Target FEC Stack' code point 'FEC 129 Pseudowire'.TmnxOamVccvSwitTgtFecTypeINTEGERfec128(2)none(1)static(3)An object of type TmnxOamVccvSwitTgtFecType specifies the type of downstream FEC (Forward Equivalence Class) segment to be tested during a VCCV ping or trace route test. The path to be tested starts with a FEC segment, and switches to a FEC segment with the specified (different) type. Values: none(1) The path to be tested does not switch FEC types. fec128(2) Switch to a segment with FEC type 'FEC 128 Pseudowire'. static(3) Switch to a segment with FEC type 'Static Pseudowire'.TmnxOamVccvTrTestSubModeINTEGERstatic(2)unspecified(1)A value of type TmnxOamVccvTrTestSubMode specifies the type of VCCV trace route test to perform. VCCV test types: static(2) Perform a VCCV trace route test using the RFC 6426 'Target FEC Stack' code point 'Static Pseudowire'. unspecified(1) Perform any other supported type of VCCV trace route test. Examples: a VCCV trace route test using the RFC 4379 'Target FEC Stack' code point 'FEC 128 Pseudowire'; a VCCV trace route test using the RFC 4379 'Target FEC Stack' code point 'FEC 129 Pseudowire'.
Traps / Notifications
- tmnxAncpLoopbackTestCompleted
1.3.6.1.4.1.6527.3.1.3.11.1.0.7 - tmnxOamDiagTestCompleted
1.3.6.1.4.1.6527.3.1.3.11.6.0.1 - tmnxOamLdpTtraceAutoDiscState
1.3.6.1.4.1.6527.3.1.3.11.2.0.4 - tmnxOamLdpTtraceFecDisStatus
1.3.6.1.4.1.6527.3.1.3.11.2.0.6 - tmnxOamLdpTtraceFecPFailUpdate
1.3.6.1.4.1.6527.3.1.3.11.2.0.7 - tmnxOamLdpTtraceFecProbeState
1.3.6.1.4.1.6527.3.1.3.11.2.0.5 - tmnxOamPingProbeFailed
1.3.6.1.4.1.6527.3.1.3.11.1.0.1 - tmnxOamPingProbeFailedV2
1.3.6.1.4.1.6527.3.1.3.11.1.0.4 - tmnxOamPingProbeFailedV3
1.3.6.1.4.1.6527.3.1.3.11.1.0.8 - tmnxOamPingTestCompleted
1.3.6.1.4.1.6527.3.1.3.11.1.0.3 - tmnxOamPingTestCompletedV2
1.3.6.1.4.1.6527.3.1.3.11.1.0.6 - tmnxOamPingTestCompletedV3
1.3.6.1.4.1.6527.3.1.3.11.1.0.10 - tmnxOamPingTestFailed
1.3.6.1.4.1.6527.3.1.3.11.1.0.2 - tmnxOamPingTestFailedV2
1.3.6.1.4.1.6527.3.1.3.11.1.0.5 - tmnxOamPingTestFailedV3
1.3.6.1.4.1.6527.3.1.3.11.1.0.9 - tmnxOamSaaThreshold
1.3.6.1.4.1.6527.3.1.3.11.3.0.1 - tmnxOamTrPathChange
1.3.6.1.4.1.6527.3.1.3.11.2.0.1 - tmnxOamTrTestCompleted
1.3.6.1.4.1.6527.3.1.3.11.2.0.3 - tmnxOamTrTestFailed
1.3.6.1.4.1.6527.3.1.3.11.2.0.2
Groups and compliance
- tmnxOamAncpTestV5v0Group
- tmnxOamAtmPingR2r1Group
- tmnxOamBierPingV20v0Group
- tmnxOamBierTrV20v0Group
- tmnxOamCpePingV4v0Group
- tmnxOamDiagNotificationV16v0Grp
- tmnxOamDiagNotifyObjsV16v0Group
- tmnxOamDiagV16v0Compliance
- tmnxOamDiagV16v0Group
- tmnxOamDiagV23v0Compliance
- tmnxOamDiagV23v0Group
- tmnxOamEthCfmPingV24v0ObjGroup
- tmnxOamEthCfmPingV8v0Group
- tmnxOamEthCfmTrV8v0Group
- tmnxOamGenObsoletedV21v0Group
- tmnxOamGenPoolShareV20v0Group
- tmnxOamGenPoolSplitV20v0Group
- tmnxOamGenSessPoolStHstV22v0Grp
- tmnxOamGenSessPoolStRtV22v0Group
- tmnxOamGenTxPoolV22v0Group
- tmnxOamGeneralV10v0Compliance
- tmnxOamGeneralV10v0Group
- tmnxOamGeneralV11v0Compliance
- tmnxOamGeneralV11v0Group
- tmnxOamGeneralV14v0Compliance
- tmnxOamGeneralV14v0Group
- tmnxOamGeneralV19v0Compliance
- tmnxOamGeneralV19v0Group
- tmnxOamGeneralV20v0Compliance
- tmnxOamGeneralV22v0Compliance
- tmnxOamGeneralV8v0Compliance
- tmnxOamGeneralV8v0Group
- tmnxOamIcmpPingCandV23v0ObjGroup
- tmnxOamIcmpPingGroup
- tmnxOamIcmpPingV23v0ObjGroup
- tmnxOamIcmpTrCandV23v0Group
- tmnxOamIcmpTrV21v0Group
- tmnxOamIcmpTrV22v0Group
- tmnxOamIcmpTrV23v0Group
- tmnxOamIfPingV20v0Compliance
- tmnxOamIfPingV20v0Group
- tmnxOamLTtraceV9v0Group
- tmnxOamLagMeasInitV24v0Group
- tmnxOamLagMeasV24v0Compliance
- tmnxOamLagMeasV25v0ObjGroup
- tmnxOamLnkMeasV21v0Compliance
- tmnxOamLnkMeasV21v0Group
- tmnxOamLnkMeasV22v0Compliance
- tmnxOamLnkMeasV22v0Group
- tmnxOamLspPingV11v0Group
- tmnxOamLspPingV23v0ObjGroup
- tmnxOamLspPingV4v0Group
- tmnxOamLspPingV5v0Group
- tmnxOamLspPingV6v0Group
- tmnxOamLspTrV22v0Group
- tmnxOamLspTrV23v0Group
- tmnxOamLspTrV4v0Group
- tmnxOamLspTrV5v0Group
- tmnxOamLspTrV6v0Group
- tmnxOamMRInfoV4v0Group
- tmnxOamMacPingCtlV11v0Group
- tmnxOamMacPingHistoryV11v0Group
- tmnxOamMacPingL2MapGroup
- tmnxOamMacPingV4v0Group
- tmnxOamMacTrV3v0Group
- tmnxOamMcastTrV4v0Group
- tmnxOamMfibPingV4v0Group
- tmnxOamMfibPingV6v0Group
- tmnxOamMobilePingGroup
- tmnxOamMobilePingV16v0Group
- tmnxOamP2mpLspPingGroup
- tmnxOamP2mpLspPingV10v0Group
- tmnxOamP2mpLspPingV23v0ObjGroup
- tmnxOamP2mpLspPingV8v0Group
- tmnxOamP2mpLspTraceGroup
- tmnxOamPing7450V4v0Compliance
- tmnxOamPing7450V5v0Compliance
- tmnxOamPing7450V6v0Compliance
- tmnxOamPing7450V7v0Compliance
- tmnxOamPing7450V8v0Compliance
- tmnxOamPing7750V4v0Compliance
- tmnxOamPing7750V5v0Compliance
- tmnxOamPing7750V6v0Compliance
- tmnxOamPing7750V7v0Compliance
- tmnxOamPing77x0V8v0Compliance
- tmnxOamPing7xx0V10v0Compliance
- tmnxOamPing7xx0V11v0Compliance
- tmnxOamPing7xx0V12v0Compliance
- tmnxOamPing7xx0V13v0Compliance
- tmnxOamPing7xx0V14v0Compliance
- tmnxOamPing7xx0V15v0Compliance
- tmnxOamPing7xx0V16v0Compliance
- tmnxOamPing7xx0V19v0Compliance
- tmnxOamPing7xx0V20v0Compliance
- tmnxOamPing7xx0V22v0Compliance
- tmnxOamPing7xx0V23v0Compliance
- tmnxOamPing7xx0V24v0Compliance
- tmnxOamPing7xx0V25v0Compliance
- tmnxOamPing7xx0V9v0Compliance
- tmnxOamPingCtlV10v0Group
- tmnxOamPingGeneralV10v0Group
- tmnxOamPingGeneralV4v0Group
- tmnxOamPingGeneralV6v0Group
- tmnxOamPingGeneralV7v0Group
- tmnxOamPingGeneralV8v0Group
- tmnxOamPingNotificationObsoleteV4v0Group
- tmnxOamPingNotificationV4v0Group
- tmnxOamPingNotificationV5v0Group
- tmnxOamPingNotificationV7v0Group
- tmnxOamPingObsoleteV10v0Group
- tmnxOamPingObsoleteV11v0Group
- tmnxOamPingObsoleteV14v0Group
- tmnxOamPingObsoleteV4v0Group
- tmnxOamPingObsoleteV6v0Group
- tmnxOamPingObsoleteV6v1Group
- tmnxOamPingObsoleteV8v0Group
- tmnxOamPingObsoletedV16v0Group
- tmnxOamPingObsoletedV23v0Group
- tmnxOamPingV11v0Group
- tmnxOamPingV12v0Group
- tmnxOamPingV13v0Group
- tmnxOamPingV14v0Group
- tmnxOamPingV15v0Group
- tmnxOamPingV16v0Group
- tmnxOamPingV19v0Group
- tmnxOamPingV22v0Group
- tmnxOamSaaGeneralV10v0Group
- tmnxOamSaaGeneralV3v0Group
- tmnxOamSaaGeneralV7v0Group
- tmnxOamSaaGeneralV8v0Group
- tmnxOamSaaNotificationV3v0Group
- tmnxOamSaaObsoleteV14v0Group
- tmnxOamSaaThresholdV3v0Group
- tmnxOamSaaV10v0Compliance
- tmnxOamSaaV3v0Compliance
- tmnxOamSaaV7v0Compliance
- tmnxOamSaaV8v0Compliance
- tmnxOamTr7450V4v0Compliance
- tmnxOamTr7450V5v0Compliance
- tmnxOamTr7450V6v0Compliance
- tmnxOamTr7450V7v0Compliance
- tmnxOamTr7750V4v0Compliance
- tmnxOamTr7750V5v0Compliance
- tmnxOamTr77x0V6v0Compliance
- tmnxOamTr77x0V7v0Compliance
- tmnxOamTr7xx0V11v0Compliance
- tmnxOamTr7xx0V12v0Compliance
- tmnxOamTr7xx0V13v0Compliance
- tmnxOamTr7xx0V15v0Compliance
- tmnxOamTr7xx0V19v0Compliance
- tmnxOamTr7xx0V20v0Compliance
- tmnxOamTr7xx0V21v0Compliance
- tmnxOamTr7xx0V22v0Compliance
- tmnxOamTr7xx0V23v0Compliance
- tmnxOamTr7xx0V8v0Compliance
- tmnxOamTr7xx0V9v0Compliance
- tmnxOamTrGeneralV11v0Group
- tmnxOamTrGeneralV4v0Group
- tmnxOamTrGeneralV5v0Group
- tmnxOamTrGeneralV6v0Group
- tmnxOamTrGeneralV7v0Group
- tmnxOamTrGeneralV8v0Group
- tmnxOamTrHopsV4v0Group
- tmnxOamTrNotificationV4v0Group
- tmnxOamTrNotificationV5v0Group
- tmnxOamTrNotificationV8v0Group
- tmnxOamTrObsoleteV13v0Group
- tmnxOamTrObsoleteV14v0Group
- tmnxOamTrObsoleteV3v0Group
- tmnxOamTrObsoleteV4v0Group
- tmnxOamTrObsoleteV5v0Group
- tmnxOamTrObsoleteV6v0Group
- tmnxOamTrV11v0Group
- tmnxOamTrV12v0Group
- tmnxOamTrV13v0Group
- tmnxOamTrV15v0Group
- tmnxOamTrV16v0Group
- tmnxOamTrV19v0Group
- tmnxOamVccvPingGroup
- tmnxOamVccvPingV11v0Group
- tmnxOamVccvPingV23v0ObjGroup
- tmnxOamVccvPingV5v0Group
- tmnxOamVccvPingV9v0Group
- tmnxOamVccvTrV11v0Group
- tmnxOamVccvTrV6v0Group
- tmnxOamVccvTrV9v0Group
- tmnxOamVprnPingV4v0Group
- tmnxOamVprnTrObsoleteV6v0Group
- tmnxOamVprnTrV4v0Group
- tmnxOamVprnTrV6v0Group