TIMETRA-LAG-MIB
Nokia (formerly 'Alcatel-Lucent')This document is the SNMP MIB module to manage and provision the IEEE 802.3ad Link Aggregation Group operation on Nokia SROS systems. Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m TIMETRA-LAG-MIB -Tpsnmpwalk -v2c -c <community> -m TIMETRA-LAG-MIB <host> 1.3.6.1.4.1.6527.1.1.3.15Imports
| IEEE8023-LAG-MIB | dot3adAggPortEntry |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TIMETRA-GLOBAL-MIB | timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs |
| TIMETRA-PORT-MIB | tmnxPortLagId, tmnxPortPortID |
| TIMETRA-TC-MIB | LAGInterfaceNumber, TItemDescription, TItemLongDescription, TNamedItemOrEmpty, TmnxActionType, TmnxEnabledDisabled, TmnxLagPerLinkHashClass, TmnxLagPerLinkHashClassOrNone, TmnxLinkMapProfileId, TmnxPortID |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItimetraLagMIBModule | 1.3.6.1.4.1.6527.1.1.3.15 | |||
identity This document is the SNMP MIB module to manage and provision the IEEE 802.3ad Link Aggregation Group operation on Nokia SROS systems. Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||||
| NtmnxLagConformance | 1.3.6.1.4.1.6527.3.1.1.15 | |||
| NtmnxLagCompliances | 1.3.6.1.4.1.6527.3.1.1.15.1 | |||
| MtmnxLagV4v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.3 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV5v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.4 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.5 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV6v1Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.6 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.7 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.8 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.9 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV10v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.10 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV11v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.11 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems. | ||||
| MtmnxLagV12v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.12 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems release 12.0.
| ||||
| MtmnxLagV13v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.13 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems release 13.0.
| ||||
| MtmnxLagV14v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.14 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems release 14.0.
| ||||
| MtmnxLagV16v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.16 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems release 16.0.
| ||||
| MtmnxLagV19v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.19 | obsolete | ||
compliance · obsolete The compliance statement for management of extended LAG capabilities on Nokia SROS series systems release 19.0.
| ||||
| MtmnxLagV20v0Compliance | 1.3.6.1.4.1.6527.3.1.1.15.1.20 | |||
compliance · current The compliance statement for management of extended LAG capabilities on Nokia SROS series systems release 19.0.
| ||||
| NtmnxLagGroups | 1.3.6.1.4.1.6527.3.1.1.15.2 | |||
| GtmnxLagNotifyObjsGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.2 | obsolete | ||
group · obsolete The group of objects supporting LAG notifications on Nokia SROS series systems.
| ||||
| GtmnxLagNotificationsGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.3 | obsolete | ||
group · obsolete the group of notifications providing for management of Link Aggregation Group operation. | ||||
| GtmnxLagInstanceV4v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.5 | obsolete | ||
group · obsolete The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems.
| ||||
| GtmnxObsoletedObjectsV4v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.6 | |||
group · current The group of objects that have been obsoleted in release 4.0 on Nokia SROS series systems.
| ||||
| GtmnxLagInstanceV5v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.7 | obsolete | ||
group · obsolete The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems.
| ||||
| GtmnxLagV5v0NotifGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.8 | obsolete | ||
group · obsolete the group of notifications providing for management of Link Aggregation Group operation in version 5.0 of the Nokia SROS series systems. | ||||
| GtmnxLagNotifyObjsV5v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.9 | obsolete | ||
group · obsolete The group of objects supporting LAG notifications on Nokia SROS series systems. | ||||
| GtmnxLagHsmdaV6v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.10 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) with the HSMDA MDA on Nokia SROS series systems.
| ||||
| GtmnxLagInstanceV6v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.11 | obsolete | ||
group · obsolete The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems.
| ||||
| GtmnxLagV6v0NotifGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.12 | |||
group · current the group of notifications providing for management of Link Aggregation Group operation in version 6.0 of the Nokia SROS series systems. | ||||
| GtmnxLagV7v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.13 | obsolete | ||
group · obsolete The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems in 7.0 release.
| ||||
| GtmnxObsoletedObjectsV7v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.14 | |||
group · current The group of objects that have been obsoleted in release 7.0 on Nokia SROS series systems.
| ||||
| GtmnxLagInstanceV7v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.15 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems.
| ||||
| GtmnxLagV8v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.16 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems in 8.0 release. | ||||
| GtmnxLagInstanceV9v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.17 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) that were added in release 9.0 of the Nokia SROS series systems.
| ||||
| GtmnxLagNotifyObjsV10v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.18 | |||
group · current The group of objects supporting LAG notifications on Nokia SROS series systems. | ||||
| GtmnxLagV10v0NotifGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.19 | |||
group · current the group of notifications providing for management of Link Aggregation Group operation since version 10.0 of the Nokia SROS series systems.
| ||||
| GtmnxLagV11v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.20 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) that were added in release 11.0 of the Nokia SROS series systems.
| ||||
| GtmnxLagBfdGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.21 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) member BFD of the Nokia SROS series systems.
| ||||
| GtmnxLagBfdNotifGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.22 | |||
group · current The group of notifications supporting per-member micro-BFD sessions on Nokia SROS series systems.
| ||||
| GtmnxLagPerFpSapV12v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.23 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) 'per-fp-sap-instance' that were added in release 12.0 of the Nokia SROS series systems.
| ||||
| GtmnxLagSelectionHoldV12v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.24 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) 'selection-hold' that were added in release 12.0 of the Nokia SROS series systems. | ||||
| GtmnxLagPerLinkHashV12v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.25 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) 'per-link-hash-weighted' that were added in release 12.0 of the Nokia SROS series systems. | ||||
| GtmnxLagMixed10g100gV12v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.26 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) 'mixed-10g-100g' that were added in release 12.0 of the Nokia SROS series systems. | ||||
| GtmnxLagIndependentMuxGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.27 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) LACP multiplexing in the Nokia SROS series systems.
| ||||
| GtmnxLagV13v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.28 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems added in release 13.0.
| ||||
| GtmnxLagAccessV14v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.29 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems added in release 14.0. | ||||
| GtmnxLagV16v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.30 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems added in release 16.0. | ||||
| GtmnxLagV19v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.31 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems added in release 19.0.
| ||||
| GtmnxLagV20v0Group | 1.3.6.1.4.1.6527.3.1.1.15.2.32 | |||
group · current The group of objects supporting management of Link Aggregation (LAG) on Nokia SROS series systems added in release 20. | ||||
| GtmnxLagV20v0NotifGroup | 1.3.6.1.4.1.6527.3.1.1.15.2.33 | |||
group · current The group of notifications added in release 20 of Nokia SROS series systems. | ||||
| NtmnxLagDCCompliances | 1.3.6.1.4.1.6527.3.1.1.15.3 | |||
| NtmnxLagDCGroups | 1.3.6.1.4.1.6527.3.1.1.15.4 | |||
| NtLagObjects | 1.3.6.1.4.1.6527.3.1.2.15 | |||
| TtLagConfigTable | 1.3.6.1.4.1.6527.3.1.2.15.2 | NA | ||
table · not-accessible · current Configuration information about each Link Aggregation Group. | ||||
| RtLagConfigEntry | 1.3.6.1.4.1.6527.3.1.2.15.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the tLagConfigTable. Each entry represents a Link Aggregation Group. Create or destroy rows to add or remove Link Aggregation Groups (LAG). After tLagRowStatus is set to active(1), a corresponding entry is created in IEEE8023-LAG-MIB dot3adAggTable. The corresponding entry in IEEE8023-LAG-MIB dot3adAggTable is removed when tLagRowStatus is set to destroy(6). Use ifAdminStatus to set interface up and down for this LAG entry. Use ifAlias for the interface description.
| ||||
| CtLagIndex | 1.3.6.1.4.1.6527.3.1.2.15.2.1.1 | LAGInterfaceNumber | NA | |
column · LAGInterfaceNumber · not-accessible · current the number of the Link Aggregation Group. | ||||
| CtLagRowStatus | 1.3.6.1.4.1.6527.3.1.2.15.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus for this entry. | ||||
| CtLagPortThreshold | 1.3.6.1.4.1.6527.3.1.2.15.2.1.3 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current tLagPortThreshold is a threshold for tLagPortThresholdAction. When a physical port link state changes and the number of operational physical ports is less than or equal to tLagPortThreshold, tLagPortThresholdAction is invoked: either the LAG is set operationally down, or the protocols operating on the LAG interface are adjusted. When the number of operational physical ports becomes greater than tLagPortThreshold, tLagPortThresholdAction is revoked: either the LAG is set operationally up, or the protocols operating on the LAG interface are adjusted. The value zero means tLagPortThresholdAction is never invoked. To invoke dynamicCost at every physical port state change, set tLagPortThreshold to the total number of physical ports configured to be in the Link Aggregation Group. The value of this object can be overruled with a nonzero value of the object tLagWeightThreshold. | ||||
| CtLagPortThresholdAction | 1.3.6.1.4.1.6527.3.1.2.15.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Port Threshold Action is action to take when the number of operational (link up) physical ports is less than tLagPortThreshold. When a physical port ifOperStatus changes and the number of operational physical ports is less than or equal to tLagPortThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to down(2). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to match the number of physical ports remaining in the Link Aggregation Group. a tLagDynamicCostOn notification is generated. - when set to 'staticCost', the ifOperStatus stays up, but dependent protocols such as ISIS are signaled and will adjust their operation (cost) according to the value of the object tLagPortThresholdStaticCost. When a physical port ifOperStatus changes and the number of operational physical ports is greater than tLagPortThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to up(1). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to be the value as configured. a tLagDynamicCostOff notification is generated. Regardless of the setting of this object, when the number of operational physical ports goes to zero, the Link Aggregation Group's ifOperStatus goes to down.
| ||||
| CtLagEnableMarkerGenerator | 1.3.6.1.4.1.6527.3.1.2.15.2.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current enables (true(1)) or disables (false(2)) the Marker Generator protocol. | ||||
| CtLagEnableLACP | 1.3.6.1.4.1.6527.3.1.2.15.2.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current enables (true(1)) or disables (false(2)) the Link Aggregation Control Protocol (LACP). The value of tLagEnableLACP can only be set to 'true(1)' when tLagStandbySignaling is set to 'lacp(1)' and the value of tLagLACPSelCrit is not 'bestPort(3)'. | ||||
| CtLagDescription | 1.3.6.1.4.1.6527.3.1.2.15.2.1.7 | TItemLongDescription (SIZE (0..160)) | RC | |
column · TItemLongDescription (SIZE (0..160)) · read-create · current Description text for the Link Aggregation Group port. | ||||
| CtLagDynamicCosting | 1.3.6.1.4.1.6527.3.1.2.15.2.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current When dynamic cost and OSPF autocost are both configured then costing is applied based on the total number of links configured and the cost is advertised inversely proportional to the number of links available at the time, providing the number of links that are up exceeds the configured LAG threshold value at which time the configured threshold action determines if and at what cost this LAG will be advertised. | ||||
| CtLagLACPMode | 1.3.6.1.4.1.6527.3.1.2.15.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current tLagLACPMode represents the mode in which LACP will operate. If the value is set to 'passive', LACP places all member ports of a lag into a passive negotiating state. When this is the case member ports of the lag respond to LACP packets they receive but do not initiate LACP packet negotiation. If the value is set to 'active', LACP places all member ports of a lag in to an active negotiation state. When this occurs the port will initiate LACP negotiation immediately once the port achieves link up state. At least one of the peer lag ports must be configured as active to initiate LACP. The default mode is passive.
| ||||
| CtLagLACPAdminKeyAutogen | 1.3.6.1.4.1.6527.3.1.2.15.2.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current tLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key in the dot3adAggActorAdminKey object was auto generated. tLagLACPAdminKeyAutogen is set to 'false', if the lag administrative key was manually configured. | ||||
| CtLagLACPTransmitInterval | 1.3.6.1.4.1.6527.3.1.2.15.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current tLagLACPTransmitInterval configures the timer interval for periodic transmission of LACP packets. If set to 'slow', LACP packets are transmitted every 30 seconds. If set to 'fast', LACP packets are transmitted every second.
| ||||
| CtLagAccessAdaptQos | 1.3.6.1.4.1.6527.3.1.2.15.2.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tLagAccessAdaptQos specifies how the LAG SAP queue and
virtual scheduler buffering and rate parameters are adapted over
multiple active MDAs.
link (1) - The LAG will create the SAP queues and virtual
schedulers with the actual parameters on each MDA.
distribute (2) - Each MDA will receive a fraction of the SAP and
scheduler parameters.
portFair (3) - The LAG will create the SAP queues and virtual
schedulers with actual configuration parameters
on each port members in the LAG. The bandwidth is
distributed among the ports based on each port's
bandwidth relative to the total active bandwidth.
| ||||
| CtLagLACPXmitStdby | 1.3.6.1.4.1.6527.3.1.2.15.2.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagLACPXmitStdby specifies whether or not LACP messages are transmitted on standby-links. | ||||
| CtLagLACPSelCrit | 1.3.6.1.4.1.6527.3.1.2.15.2.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tLagLACPSelCrit specifies which selection criteria should be used to select the active sub-group.
| ||||
| CtLagLACPSelCritSlaveToPartner | 1.3.6.1.4.1.6527.3.1.2.15.2.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagLACPSelCritSlaveToPartner specifies together with tLagLACPSelCrit selection criteria should be used to select the active sub-group. The term 'eligible member' refers to a lag-member link which can potentially become active. This means it is oper up, and not disabled for use by the remote side. The object tLagLACPSelCritSlaveToPartner can be used to control whether or not this latter condition is taken into account. | ||||
| CtLagLACPNbrOfSubGroups | 1.3.6.1.4.1.6527.3.1.2.15.2.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tLagLACPNbrOfSubGroups indicates the number of subgroups configured in this LAG. | ||||
| CtLagholdTimeDown | 1.3.6.1.4.1.6527.3.1.2.15.2.1.17 | Unsigned32 (0..2000) | RC | |
column · Unsigned32 (0..2000) · read-create · current The value of tLagholdTimeDown specifies the timer in 0.1 second units which controls the delay between detecting that a LAG is down (all active ports are down) and reporting it to the higher levels. The default value for this timer is 0, i.e. the higher levels are informed directly. A non zero value may be configured e.g. when active/standby signalling is used in a 1:1 fashion to avoid that the higher levels are informed during the small time interval between detecting that the LAG is down and the time needed to activate the standby system.
| ||||
| CtLagPortType | 1.3.6.1.4.1.6527.3.1.2.15.2.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tLagPortType specifies the type of ports allowed in this LAG. A value of 'standard (1)' allows all non-HSMDA and non-HS type ports to be added to this LAG. A value of 'hsmdaV2 (3)' limits the LAG members to be HSMDA-v2. value of 'hs (4)' limits the LAG members to be HS. A value of '(2)' is not allowed anymore.
| ||||
| CtLagPerFpIngQueuing | 1.3.6.1.4.1.6527.3.1.2.15.2.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagPerFpIngQueuing specifies whether a more efficient method of queue allocation for LAG SAPs should be utilized. An 'inconsistentValue' error is returned if this object is set to a different value when there are existing port members in the LAG. | ||||
| CtLagSystemId | 1.3.6.1.4.1.6527.3.1.2.15.2.1.20 | MacAddress | RC | |
column · MacAddress · read-create · current The value of the object tLagSystemId specifies A 6-octet MAC address used as a unique identifier for the System that contains this Aggregator. If set to zero, the dot3adAggActorSystemID will be used as identifier. | ||||
| CtLagSystemPriority | 1.3.6.1.4.1.6527.3.1.2.15.2.1.21 | Integer32 (-1 | 0..65535) | RC | |
column · Integer32 (-1 | 0..65535) · read-create · current The value of the object tLagSystemPriority specifies a 2-octet value indicating the priority value associated with the Actor's System ID. If set to -1, the priority is taken from the object dot3adAggActorSystemPriority | ||||
| CtLagStandbySignaling | 1.3.6.1.4.1.6527.3.1.2.15.2.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tLagStandbySignaling specifies how the state of a member
port is signalled to the remote side when the tLagPortActiveStdby
corresponding to this member port has the value 'standby'.
lacp (1) - The state of this member port is signalled
to the other side through the LACP protocol.
powerOff (2) - This member port is powered off.
The value of tLagStandbySignaling can only be set to 'powerOff(2)'
when tLagEnableLACP is set to 'false(2)' and tLagLACPSelCrit is set to
'bestPort(3)'.
| ||||
| CtLagPerLinkHash | 1.3.6.1.4.1.6527.3.1.2.15.2.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagPerLinkHash specifies whether SAP or interface associated with this LAG will send traffic over a single link of a LAG auto-rebalancing as links are added and removed from this LAG. | ||||
| CtLagPerFpEgrQueuing | 1.3.6.1.4.1.6527.3.1.2.15.2.1.24 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagPerFpEgrQueuing specifies whether a more efficient method of queue allocation for LAG SAPs should be utilized. An 'inconsistentValue' error is returned if this object is set to a different value when there are existing port members in the LAG. | ||||
| CtLagIncludeEgrHashCfg | 1.3.6.1.4.1.6527.3.1.2.15.2.1.25 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagIncludeEgrHashCfg specifies whether explicitly configured hashing should factor into the egress buffering and rate distribution (tLagAccessAdaptQos). When the value of tLagIncludeEgrHashCfg is set to true, all SAPs on this LAG which have explicit hashing configured, the egress HQos and HPol (including queues, policers, schedulers and arbiters) will receive 100% of the configured bandwidth (essentially operating in adapt-qos link mode). For any Multi-Service-Sites assigned to such a LAG, bandwidth will continue to be divided according to adapt-qos distribute mode. An 'inconsistentValue' error is returned if tLagIncludeEgrHashCfg is set to true and tLagAccessAdaptQos is set to link mode. | ||||
| CtLagPerFpSapInstance | 1.3.6.1.4.1.6527.3.1.2.15.2.1.26 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagPerFpSapInstance specifies whether a more efficient method of SAP allocation for LAG SAPs should be utilized. This object may only be set to true, if both tLagPerFpIngQueuing and tLagPerFpEgrQueuing are set to true. An 'inconsistentValue' error is returned if this object is set to false, when there are existing port members in the LAG. | ||||
| CtLagLacpHoldTime | 1.3.6.1.4.1.6527.3.1.2.15.2.1.27 | Unsigned32 (0..2000 | 4294967295) | RC | |
column · Unsigned32 (0..2000 | 4294967295) · read-create · current The value of tLagLacpHoldTime specifies the time that this system waits before switching to a newly eligible sub-group while the currently active sub-group is active. In other words, if the system has switched from subgroup X to another one because subgroup X failed, and subgroup X becomes operational again, it can delay this system switching back to sub-group X. The value zero specifies that the system immediately switches back. The value all ones specifies that the system never switches back autonomously.
| ||||
| CtLagPerLinkHashWeighted | 1.3.6.1.4.1.6527.3.1.2.15.2.1.29 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagPerLinkHashWeighted specifies whether there is a class and weight based balanced distribution of traffic egressing on the objects configured on the LAG. An 'inconsistentValue' error is returned if this object is set to 'true' when tLagPerLinkHash is also set to 'true'. | ||||
| CtLagPerLinkHashWeightedRebalance | 1.3.6.1.4.1.6527.3.1.2.15.2.1.30 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagPerLinkHashWeightedRebalance specifies whether to rebalance automatically when there is a class and weight based balanced distribution of traffic egressing on the objects configured on the LAG. An 'inconsistentValue' error is returned if this object is set to 'true' when tLagPerLinkHash is also set to 'true' or tLagPerLinkHashWeighted is set to 'false'. | ||||
| CtLagPortWeightSpeed | 1.3.6.1.4.1.6527.3.1.2.15.2.1.31 | Unsigned32 (0 | 1 | 10) | RC | |
column · Unsigned32 (0 | 1 | 10) · read-create · current The value of tLagPortWeightSpeed specifies the speed corresponding to a weight unit. The value zero specifies that mixing ports with different speeds is not allowed in this LAG. For example: a 10 gbps link in a LAG where the port weight speed is equal to 1 gbps has weight ten, while a 10 gbps link in a LAG where the port weight speed is equal to 10 gbps has weight one.
| ||||
| CtLagWeightThreshold | 1.3.6.1.4.1.6527.3.1.2.15.2.1.33 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current The value of the object tLagWeightThreshold specifies a threshold for the action specified by the object tLagWeightThresholdAction; the value is a weight, and the unit depends on the value of the object tLagPortWeightSpeed; for example, while the value of tLagPortWeightSpeed is equal to 10, and the value of tLagWeightThreshold is equal to four, the threshold would be reached when a single 40gbps port changes state. When a physical port link state changes and the weight of operational physical ports is less than or equal to the value of tLagWeightThreshold, the action specified by tLagWeightThresholdAction is invoked: either the LAG is set operationally down, or the protocols operating on the LAG interface are adjusted. When the weight of the operational physical ports becomes greater than the value specified by tLagWeightThreshold, the action is revoked: either the LAG is set operationally up, or the protocols operating on the LAG interface are adjusted. The value zero means that the action is never invoked. To invoke dynamicCost at every physical port state change, set the value of tLagWeightThreshold to the total weight of physical ports configured to be in the Link Aggregation Group. A nonzero value of this object overrules the value of the object tLagPortThreshold. | ||||
| CtLagWeightThresholdAction | 1.3.6.1.4.1.6527.3.1.2.15.2.1.34 | INTEGER | RC | |
column · INTEGER · read-create · current The value of the object tLagWeightThresholdAction specifies the action to take when the weight of the physical ports that are operational (link up) is less than the value of tLagWeightThreshold. When a physical port ifOperStatus changes and the weight of operational physical ports is less than or equal to tLagWeightThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to down(2). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to match the weight of the physical ports remaining in the Link Aggregation Group; a tLagDynamicCostOn notification is generated. - when set to 'staticCost', the ifOperStatus stays up, but dependent protocols such as ISIS are signaled and will adjust their operation (cost) according to the value of the object tLagWeightThresholdStaticCost. When a physical port ifOperStatus changes and the weight of the operational physical ports is greater than tLagWeightThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to up(1). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to be the value as configured; a tLagDynamicCostOff notification is generated. Regardless of the setting of this object, when the weight of operational physical ports goes to zero, the Link Aggregation Group's ifOperStatus goes to down.
| ||||
| CtLagMonitorOperGrpName | 1.3.6.1.4.1.6527.3.1.2.15.2.1.36 | TNamedItemOrEmpty | RC | |
column · TNamedItemOrEmpty · read-create · current The value of tLagMonitorOperGrpName specifies the operational group of which the status affects the status of this LAG. If the value is not empty, it must correspond to a conceptual row in the TIMETRA-SERV-MIB::svcOperGrpTable. | ||||
| CtLagLacpMuxControl | 1.3.6.1.4.1.6527.3.1.2.15.2.1.37 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tLagLacpMuxControl specifies the LACP MUX (multiplexer) state machine variant. The value 'coupled' specifies that transmit and receive directions are activated together, while the value 'independent' specifies that both directions can be activated independently.
| ||||
| CtLagBfdDisableSoftResetExt | 1.3.6.1.4.1.6527.3.1.2.15.2.1.38 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tLagBfdDisableSoftResetExt specifies if the extension of Bidirectional Forwarding Detection (BFD) timers during soft reset is disabled. While the value of tLagBfdDisableSoftResetExt is 'true', BFD timers keep running even if a link failure is known to be caused by an IOM or IMM soft reset; this will cause a faster switchover of the LAG from this system to the redundant system. While the value of tLagBfdDisableSoftResetExt is 'false', BFD timers are frozen if a link failure is known to be caused by an IOM or IMM soft reset. | ||||
| CtLagAccessBandwidth | 1.3.6.1.4.1.6527.3.1.2.15.2.1.39 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value of tLagAccessBandwidth specifies the administrative bandwidth assigned to this lag. The administrative bandwidth can be over or under booked using the value of tLagAccessBookingFactor.
| ||||
| CtLagAccessBookingFactor | 1.3.6.1.4.1.6527.3.1.2.15.2.1.40 | Unsigned32 (1..1000) | RC | |
column · Unsigned32 (1..1000) · read-create · current The value of tLagAccessBookingFactor specifies the booking factor, against the administrative bandwidth specified by tLagAccessBandwidth. | ||||
| CtLagAccessAvailableBW | 1.3.6.1.4.1.6527.3.1.2.15.2.1.41 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tLagAccessAvailableBW indicates the bandwidth that is still free for booking on this lag.
| ||||
| CtLagAccessBookedBW | 1.3.6.1.4.1.6527.3.1.2.15.2.1.42 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tLagAccessBookedBW indicates the lag bandwidth that has been booked.
| ||||
| CtLagPortThresholdStaticCost | 1.3.6.1.4.1.6527.3.1.2.15.2.1.43 | Unsigned32 (0..16777215) | RC | |
column · Unsigned32 (0..16777215) · read-create · current The value of the object tLagPortThresholdStaticCost specifies the cost of the LAG link when the number of operational (link up) physical ports is less than tLagPortThreshold, and the value of the object tLagPortThresholdAction is equal to 'staticCost'. The cost can be used by Interior Gateway Protocols such as ISIS. | ||||
| CtLagWeightThresholdStaticCost | 1.3.6.1.4.1.6527.3.1.2.15.2.1.44 | Unsigned32 (0..16777215) | RC | |
column · Unsigned32 (0..16777215) · read-create · current The value of the object tLagWeightThresholdStaticCost specifies the cost of the LAG link when the weight of operational (link up) physical ports is less than tLagWeightThreshold, and the value of the object tLagWeightThresholdAction is equal to 'staticCost'. The cost can be used by Interior Gateway Protocols such as ISIS. | ||||
| CtLagAccessBandwidthHigh | 1.3.6.1.4.1.6527.3.1.2.15.2.1.45 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value of tLagAccessBandwidthHigh specifies the higher 32 bits of the bandwidth assigned to this lag. The object tLagAccessBandwidth specifies the lower 32 bits. The administrative bandwidth can be over or under booked using the value of tLagAccessBookingFactor.
| ||||
| CtLagHashWeightThreshold | 1.3.6.1.4.1.6527.3.1.2.15.2.1.46 | Integer32 (0..6400000) | RC | |
column · Integer32 (0..6400000) · read-create · current The value of the object tLagHashWeightThreshold specifies a threshold for the action specified by the object tLagHashWeightThresholdAction; The value of tLagHashWeightThreshold is compared to the sum of the values of tLagPortHashWeight of all active physical ports in the LAG. When a physical port link state changes and the hash weight of operational physical ports is less than or equal to the value of tLagHashWeightThreshold, the action specified by tLagHashWeightThresholdAction is invoked: either the LAG is set operationally down, or the protocols operating on the LAG interface are adjusted. When the weight of the operational physical ports becomes greater than the value specified by tLagHashWeightThreshold, the action is revoked: either the LAG is set operationally up, or the protocols operating on the LAG interface are adjusted. The value zero means that the action is never invoked. To invoke dynamicCost at every physical port state change, set the value of tLagHashWeightThreshold to the total weight of physical ports configured to be in the Link Aggregation Group. | ||||
| CtLagHashWeightThresholdAction | 1.3.6.1.4.1.6527.3.1.2.15.2.1.47 | INTEGER | RC | |
column · INTEGER · read-create · current The value of the object tLagHashWeightThresholdAction specifies the action to take when the weight of the physical ports that are operational (link up) is less than the value of tLagHashWeightThreshold. When a physical port ifOperStatus changes and the weight of operational physical ports is less than or equal to tLagHashWeightThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to down(2). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to match the weight of the physical ports remaining in the Link Aggregation Group; a tLagDynamicCostOn notification is generated. - when set to 'staticCost', the ifOperStatus stays up, but dependent protocols such as ISIS are signaled and will adjust their operation (cost) according to the value of the object tLagHashWeightThresholdStaticCst. When a physical port ifOperStatus changes and the weight of the operational physical ports is greater than tLagHashWeightThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tLagIfIndex) goes to up(1). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to be the value as configured; a tLagDynamicCostOff notification is generated. Regardless of the setting of this object, when the weight of operational physical ports goes to zero, the Link Aggregation Group's ifOperStatus goes to down.
| ||||
| CtLagHashWeightThresholdStaticCst | 1.3.6.1.4.1.6527.3.1.2.15.2.1.48 | Unsigned32 (0..16777215) | RC | |
column · Unsigned32 (0..16777215) · read-create · current The value of the object tLagHashWeightThresholdStaticCst specifies the cost of the LAG link when the weight of operational (link up) physical ports is less than tLagHashWeightThreshold, and the value of the object tLagHashWeightThresholdAction is equal to 'staticCost'. The cost can be used by Interior Gateway Protocols such as ISIS. | ||||
| CtLagAdaptiveLb | 1.3.6.1.4.1.6527.3.1.2.15.2.1.49 | TruthValue | RC | |
column · TruthValue · read-create · current The value of the object tLagAdaptiveLb specifies if the system applies adaptive load balancing to the member ports of this LAG. | ||||
| CtLagAdaptiveLbTolerance | 1.3.6.1.4.1.6527.3.1.2.15.2.1.50 | Unsigned32 (1..100) | RC | |
column · Unsigned32 (1..100) · read-create · current The value of tLagAdaptiveLbTolerance specifies the allowed difference between the highest member port load and the lowest. The value is only relevant while tLagAdaptiveLb is equal to 'true'.
| ||||
| TtLagOperationTable | 1.3.6.1.4.1.6527.3.1.2.15.3 | NA | ||
table · not-accessible · current Operational information about each Link Aggregation Group. | ||||
| RtLagOperationEntry | 1.3.6.1.4.1.6527.3.1.2.15.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the tLagOperationTable. Each entry represents an active Link Aggregation Group.
| ||||
| CtLagIfIndex | 1.3.6.1.4.1.6527.3.1.2.15.3.1.1 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current ifIndex for the Link Aggregation Group. This value is zero when tLagRowStatus is not active(1). | ||||
| CtLagConfigLastChange | 1.3.6.1.4.1.6527.3.1.2.15.3.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current last change timestamp records when any object in tLagConfigTable was set. | ||||
| CtLagPortThresholdFalling | 1.3.6.1.4.1.6527.3.1.2.15.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current counts the number of linkDown or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being less than or equal to tLagPortThreshold value. | ||||
| CtLagPortThresholdRising | 1.3.6.1.4.1.6527.3.1.2.15.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current counts the number of linkUp or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being greater than tLagPortThreshold value. | ||||
| CtLagLACPPrimaryPort | 1.3.6.1.4.1.6527.3.1.2.15.3.1.5 | TmnxPortID | RO | obsolete |
column · TmnxPortID · read-only · obsolete tLagLACPPrimaryPort contains the primary port of the LACP. The following two conditions have to be met for the port to become eligible for becoming the primary port: a) Port has to be in either link up or oper up. b) The port must have received at least one LACP PDU. Once the above two conditions have been met, port with a highest priority is chosen as the primary port. If there is a tie, the smallest TmnxPortID will be the primary port. | ||||
| CtLagPortReasonDownFlags | 1.3.6.1.4.1.6527.3.1.2.15.3.1.6 | Bits | RO | obsolete |
column · Bits · read-only · obsolete The tLagPortReasonDownFlags indicates why a lag port may be in the
operationally 'down' state. The following reasons are detected
through this object:
unknown(0) - Unspecified (or unknown)
linklossFwd(1) - A sap using this port has the object
'sapEthernetLLFOperStatus' set to 'fault'
| ||||
| CtLagSelectedSubGroup | 1.3.6.1.4.1.6527.3.1.2.15.3.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tLagSelectedSubGroup indicates the currently selected sub-group. The value zero indicates that the value is not applicable. The value minus one can appear in a multi-chassis LAG configuration and indicates that the selected sub-group is in the scope of the multi-chassis peer. | ||||
| CtLagCandidateSubGroup | 1.3.6.1.4.1.6527.3.1.2.15.3.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tLagCandidateSubGroup indicates the candidate sub-group. The value zero indicates that the value is not applicable. The value minus one can appear in a multi-chassis LAG configuration and indicates that the candidate sub-group is in the scope of the multi-chassis peer. | ||||
| CtLagRemainingHoldTime | 1.3.6.1.4.1.6527.3.1.2.15.3.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tLagRemainingHoldTime indicates the time remaining before this system would switch to the newly eligible sub-group. The value zero indicates that the system would immediately switch back. The value all ones indicates that the system would never switch back autonomously.
| ||||
| CtLagPortWeightUp | 1.3.6.1.4.1.6527.3.1.2.15.3.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of tLagPortWeightUp indicates the weight of the physical ports that are operational (link up). The weight of each LAG member port is either configured or derived from the port speed. It is the value of tLagPortWeightUp that is compared with the configured weight or hash-weight threshold. | ||||
| CtLagAdaptiveLbVariation | 1.3.6.1.4.1.6527.3.1.2.15.3.1.11 | Unsigned32 (0..100) | RO | |
column · Unsigned32 (0..100) · read-only · current The value of tLagAdaptiveLbVariation indicates the actual difference between the highest member port load and the lowest. The value is only relevant while tLagAdaptiveLb is equal to 'true'.
| ||||
| CtLagAdaptiveLbChanged | 1.3.6.1.4.1.6527.3.1.2.15.3.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tLagAdaptiveLbChanged indicates the number of times a load balancing change event tLagAdaptiveLoadbalancingChanged occurred for this LAG. | ||||
| NtLagNotificationObjects | 1.3.6.1.4.1.6527.3.1.2.15.4 | |||
| StLagNotifyPortAddFailReason | 1.3.6.1.4.1.6527.3.1.2.15.4.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current tLagNotifyPortAddFailReason is used by the tLagPortAddFailed notification to indicate the reason why a port could not be added to a lag.
| ||||
| StLagNotifySubGroupSelected | 1.3.6.1.4.1.6527.3.1.2.15.4.2 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The value of tLagNotifySubGroupSelected is a printable character string which contains information about the result of the selection algorithm. | ||||
| StLagNotifyAdditionalInfo | 1.3.6.1.4.1.6527.3.1.2.15.4.3 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The value of tLagNotifyAdditionalInfo is a printable character string which contains information about the reason why the notification was generated. | ||||
| StLagNotifyStateChangedReason | 1.3.6.1.4.1.6527.3.1.2.15.4.4 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The value of tLagNotifyStateChangedReason indicates the reason why a the state of a lag changed.
| ||||
| TtLagMemberTable | 1.3.6.1.4.1.6527.3.1.2.15.5 | NA | ||
table · not-accessible · current The tLagMemberTable has an entry for each Port that is part of a LAG. | ||||
| RtLagMemberEntry | 1.3.6.1.4.1.6527.3.1.2.15.5.1 | NA | ||
row · not-accessible · current Each row entry represents a particular port in a LAG. Entries are automatically created when a Port is provisioned as part of a LAG, i.e. when tmnxPortLagId from TIMETRA-PORT-MIB.mib is changed from its default value of '0'.
| ||||
| CtLagMemberPortName | 1.3.6.1.4.1.6527.3.1.2.15.5.1.1 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tLagMemberPortName indicates the name of the port that is a member of the LAG used to index into tLagMemberTable. This is a read-only object that is the same as tmnxPortName from TIMETRA-PORT-MIB.mib. | ||||
| CtLagMemberPortIsPrimary | 1.3.6.1.4.1.6527.3.1.2.15.5.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tLagMemberPortIsPrimary indicates whether the port used to index into tLagMemberTable is the primary port of the LAG used to index into tLagMemberTable. | ||||
| TtLagPortTable | 1.3.6.1.4.1.6527.3.1.2.15.6 | NA | ||
table · not-accessible · current The tLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features. | ||||
| RtLagPortEntry | 1.3.6.1.4.1.6527.3.1.2.15.6.1 | NA | ||
row · not-accessible · current A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device. The tLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features.
| ||||
| CtLagPortSubgroup | 1.3.6.1.4.1.6527.3.1.2.15.6.1.1 | LAGSubgroup | RW | |
column · LAGSubgroup · read-write · current The value of tLagPortSubgroup specifies the subgroup to which the port in this LAG is assigned. | ||||
| CtLagPortActiveStdby | 1.3.6.1.4.1.6527.3.1.2.15.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tLagPortActiveStdby indicates active standby state of this port in the LAG.
| ||||
| CtLagPortHashWeight | 1.3.6.1.4.1.6527.3.1.2.15.6.1.3 | Integer32 (-1 | 0 | 1..100000) | RW | |
column · Integer32 (-1 | 0 | 1..100000) · read-write · current The value of tLagPortHashWeight specifies the hash weight of this port within the LAG. A value of zero means there is no weight configured, while a value of minus one means the weight is derived from the port speed, with a unit value of 1Gbps. A value in the range from 1 to 100000 is only used when all ports in the LAG have such an explicit value configured. | ||||
| CtLagPortOperHashWeight | 1.3.6.1.4.1.6527.3.1.2.15.6.1.4 | Integer32 (1..100000) | RO | |
column · Integer32 (1..100000) · read-only · current The value of tLagPortOperHashWeight indicates the operational hash weight of this port within the LAG. | ||||
| CtLagPortFlowShare | 1.3.6.1.4.1.6527.3.1.2.15.6.1.5 | Unsigned32 (0..10000) | RO | |
column · Unsigned32 (0..10000) · read-only · current The value of tLagPortFlowShare indicates the ratio of the number of traffic flows pre-assigned to this port and the sum of the number of flows pre-assigned to each operational port of the LAG. The value of tLagPortFlowShare only depends on the set of values of tLagPortOperHashWeight and TIMETRA-PORT-MIB::tmnxPortState of all ports in the LAG.
| ||||
| CtLagPortAdaptiveLbEgressRate | 1.3.6.1.4.1.6527.3.1.2.15.6.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The value of tLagPortAdaptiveLbEgressRate indicates the egress traffic rate on this LAG port when adaptive load balancing is enabled on the LAG. When adaptive load balancing is disabled on the LAG, the value has no meaning.
| ||||
| StLagLinkMapProfileTableLastChgd | 1.3.6.1.4.1.6527.3.1.2.15.7 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The value of tLagLinkMapProfileTableLastChgd indicates the sysUpTime at the time of the last modification of tLagLinkMapProfileTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. | ||||
| TtLagLinkMapProfileTable | 1.3.6.1.4.1.6527.3.1.2.15.8 | NA | ||
table · not-accessible · current The tLagLinkMapProfileTable has an entry for each LAG link map profile. | ||||
| RtLagLinkMapProfileEntry | 1.3.6.1.4.1.6527.3.1.2.15.8.1 | NA | ||
row · not-accessible · current The tLagLinkMapProfileEntry contains the information about a particular LAG link map profile. | ||||
| CtLagLinkMapProfileId | 1.3.6.1.4.1.6527.3.1.2.15.8.1.1 | TmnxLinkMapProfileId | NA | |
column · TmnxLinkMapProfileId · not-accessible · current The value of tLagLinkMapProfileId specifies a LAG link map profile identifier. | ||||
| CtLagLinkMapProfileRowStatus | 1.3.6.1.4.1.6527.3.1.2.15.8.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This value of the object tLagLinkMapProfileRowStatus specifies the status of this row. Entries are created and deleted using this object. | ||||
| CtLagLinkMapProfileLastChanged | 1.3.6.1.4.1.6527.3.1.2.15.8.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tLagLinkMapProfileLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. | ||||
| CtLagLinkMapProfileDescription | 1.3.6.1.4.1.6527.3.1.2.15.8.1.4 | TItemDescription | RC | |
column · TItemDescription · read-create · current The value of tLagLinkMapProfileDescription specifies the user provided description of this entry. | ||||
| CtLagLinkMapProfileFailureMode | 1.3.6.1.4.1.6527.3.1.2.15.8.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tLagLinkMapProfileFailureMode specifies the failure mode operation of this entry. When the value of tLagLinkMapProfileFailureMode is set to 'down', SAP or interface associated with this LAG will be brought down when the tLagLinkMapProfPortId are either down or not configured. Otherwise LAG will revert to default hash as indicated by the value of tLagPerLinkHash object.
| ||||
| CtLagLinkMapProfileActiveLink | 1.3.6.1.4.1.6527.3.1.2.15.8.1.6 | TmnxPortID | RO | |
column · TmnxPortID · read-only · current The value of tLagLinkMapProfileActiveLink indicates the active link port for this entry. | ||||
| StLagLinkMapProfPortTableLastChgd | 1.3.6.1.4.1.6527.3.1.2.15.9 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The value of tLagLinkMapProfPortTableLastChgd indicates the sysUpTime at the time of the last modification of tLagLinkMapProfPortTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. | ||||
| TtLagLinkMapProfPortTable | 1.3.6.1.4.1.6527.3.1.2.15.10 | NA | ||
table · not-accessible · current The tLagLinkMapProfPortTable has an entry for each associated port of lag link map profile. | ||||
| RtLagLinkMapProfPortEntry | 1.3.6.1.4.1.6527.3.1.2.15.10.1 | NA | ||
row · not-accessible · current The tLagLinkMapProfPortEntry contains the information about a particular port associated with the LAG link map profile. | ||||
| CtLagLinkMapProfPortId | 1.3.6.1.4.1.6527.3.1.2.15.10.1.1 | TmnxPortID | NA | |
column · TmnxPortID · not-accessible · current The value of tLagLinkMapProfPortId specifies an associated port to the LAG link map profile. | ||||
| CtLagLinkMapProfPortRowStatus | 1.3.6.1.4.1.6527.3.1.2.15.10.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This value of the object tLagLinkMapProfPortRowStatus specifies the status of this row. Entries are created and deleted using this object. | ||||
| CtLagLinkMapProfPortLastChanged | 1.3.6.1.4.1.6527.3.1.2.15.10.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tLagLinkMapProfPortLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. | ||||
| CtLagLinkMapProfPortType | 1.3.6.1.4.1.6527.3.1.2.15.10.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tLagLinkMapProfPortType specifies the type of the associated port for this entry. The value of this object must be specified at the time of creation of the entry.
| ||||
| TtLagPerLinkHashWtPortClassTable | 1.3.6.1.4.1.6527.3.1.2.15.11 | NA | ||
table · not-accessible · current The tLagPerLinkHashWtPortClassTable maintains the number of users and aggregate weight per class per port for weighted per-link-hash enabled LAGs. | ||||
| RtLagPerLinkHashWtPortClassEntry | 1.3.6.1.4.1.6527.3.1.2.15.11.1 | NA | ||
row · not-accessible · current The tLagPerLinkHashWtPortClassEntry contains the information about a particular class on a specific active port of the lag. | ||||
| CtLagPerLinkHashWtPort | 1.3.6.1.4.1.6527.3.1.2.15.11.1.1 | TmnxPortID | RO | |
column · TmnxPortID · read-only · current The value of tLagPerLinkHashWtPort indicates the port of the lag with tLagPerLinkHashWeighted enabled. | ||||
| CtLagPerLinkHashWtPortClassId | 1.3.6.1.4.1.6527.3.1.2.15.11.1.2 | TmnxLagPerLinkHashClass | RO | |
column · TmnxLagPerLinkHashClass · read-only · current The value of tLagPerLinkHashWtPortClassId indicates the traffic class for the port of the LAG. | ||||
| CtLagPerLinkHashWtPortClassUsers | 1.3.6.1.4.1.6527.3.1.2.15.11.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The value of tLagPerLinkHashWtPortClassUsers indicates number of users on the class for the port of the LAG. | ||||
| CtLagPerLinkHashWtPortClassAggWt | 1.3.6.1.4.1.6527.3.1.2.15.11.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This value of tLagPerLinkHashWtPortClassAggWt indicates aggregate weight of all users on the class for the port of the LAG. | ||||
| TtmnxLagActionTable | 1.3.6.1.4.1.6527.3.1.2.15.12 | NA | ||
table · not-accessible · current The tmnxLagActionTable allows actions on the Certificate-Authority profiles. | ||||
| RtmnxLagActionEntry | 1.3.6.1.4.1.6527.3.1.2.15.12.1 | NA | ||
row · not-accessible · current The tmnxLagActionEntry allows action on a specific Certificate-Authority profile.
| ||||
| CtmnxLagActionType | 1.3.6.1.4.1.6527.3.1.2.15.12.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The tmnxLagActionType specifies the action to be performed on the CA profile. The tmnxLagActionType and tmnxLagAction objects must be set together for the specific action to be performed.
| ||||
| CtmnxLagAction | 1.3.6.1.4.1.6527.3.1.2.15.12.1.2 | TmnxActionType | RW | |
column · TmnxActionType · read-write · current The value of tmnxLagAction specifies to perform action specified in the tmnxLagActionType object. The value of tmnxLagAction will always be returned as 'notApplicable'. The tmnxLagActionType and tmnxLagAction objects must be set together for the specific action to be performed. | ||||
| CtmnxLagActionClassId | 1.3.6.1.4.1.6527.3.1.2.15.12.1.3 | TmnxLagPerLinkHashClassOrNone | RW | |
column · TmnxLagPerLinkHashClassOrNone · read-write · current The tmnxLagActionClassId specifies the per-link-hash class identifier associated with requested action on the LAG. | ||||
| TtLagPortStatsLacpTable | 1.3.6.1.4.1.6527.3.1.2.15.13 | NA | ||
table · not-accessible · current The tLagPortStatsLacpTable contains detailed statistics for LAG ports. | ||||
| RtLagPortStatsLacpEntry | 1.3.6.1.4.1.6527.3.1.2.15.13.1 | NA | ||
row · not-accessible · current A list of Link Aggregation Control statistics counters for each Aggregation Port on this device. The tLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features.
| ||||
| CtLagPortStatsLacpTx | 1.3.6.1.4.1.6527.3.1.2.15.13.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tLagPortStatsLacpTx indicates the number of valid LACP PDUs transmitted on this port | ||||
| CtLagPortStatsLacpRx | 1.3.6.1.4.1.6527.3.1.2.15.13.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tLagPortStatsLacpRx indicates the number of valid LACP PDUs received on this port | ||||
| CtLagPortStatsLacpRxErrors | 1.3.6.1.4.1.6527.3.1.2.15.13.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tLagPortStatsLacpRxErrors indicates the number of invalid LACP PDUs received on this port | ||||
| CtLagPortStatsLacpRxIllegal | 1.3.6.1.4.1.6527.3.1.2.15.13.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The value of tLagPortStatsLacpRxIllegal indicates the number of illegal LACP PDUs received on this port | ||||
| NtLagBfdObs | 1.3.6.1.4.1.6527.3.1.2.15.50 | |||
| StmnxLagBfdFamTableLastChgd | 1.3.6.1.4.1.6527.3.1.2.15.50.1 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The value of tmnxLagBfdFamTableLastChgd indicates the sysUpTime at the time of the last modification of tmnxLagBfdFamTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. | ||||
| TtmnxLagBfdFamTable | 1.3.6.1.4.1.6527.3.1.2.15.50.2 | NA | ||
table · not-accessible · current The tmnxLagBfdFamTable allows the configuration of LAG per-member Bidirectional Forwarding Detection (BFD) for the IPv4 and IPv6 micro BFD sessions. | ||||
| RtmnxLagBfdFamEntry | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1 | NA | ||
row · not-accessible · current Each conceptual row represents information for a particular LAG's micro BFD sessions of a particular IP address family (IPv4 or IPv6). Conceptual rows in this table are created and destroyed automatically by the system, together with corresponding rows in the tLagConfigTable, such that for each row in the tLagConfigTable, two rows in the tmnxLagBfdFamTable exist, one for IPv4 and one for IPv6. | ||||
| CtmnxLagBfdFamAddressType | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The value of tmnxLagBfdFamAddressType specifies the IP address type of this micro BFD session configuration. | ||||
| CtmnxLagBfdFamLastCh | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of tmnxLagBfdFamLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row. | ||||
| CtmnxLagBfdFamAdminState | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.3 | TmnxEnabledDisabled | RC | |
column · TmnxEnabledDisabled · read-create · current The value of tmnxLagBfdFamAdminState specifies the administrative state of BFD for this IP address family on this LAG. | ||||
| CtmnxLagBfdFamAddrType | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.4 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxLagBfdFamAddrType specifies the address type of tmnxLagBfdFamAddr. Any value other than 'unknown' must be equal to the value of tmnxLagBfdFamAddressType. | ||||
| CtmnxLagBfdFamAddr | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.5 | InetAddress (SIZE (0 | 4 | 16)) | RC | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-create · current The value of tmnxLagBfdFamAddr specifies the local IP address. | ||||
| CtmnxLagBfdFamRemAddrType | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.6 | InetAddressType | RC | |
column · InetAddressType · read-create · current The value of tmnxLagBfdFamRemAddrType specifies the address type of tmnxLagBfdFamRemAddr. Any value other than 'unknown' must be equal to the value of tmnxLagBfdFamAddressType. | ||||
| CtmnxLagBfdFamRemAddr | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.7 | InetAddress (SIZE (0 | 4 | 16)) | RC | |
column · InetAddress (SIZE (0 | 4 | 16)) · read-create · current The value of tmnxLagBfdFamRemAddr specifies the remote IP address. | ||||
| CtmnxLagBfdFamTransmitInterval | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.8 | Unsigned32 (10..100000) | RC | |
column · Unsigned32 (10..100000) · read-create · current The value of tmnxLagBfdFamTransmitInterval specifies the transmit timer for the BFD packets.
| ||||
| CtmnxLagBfdFamReceiveInterval | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.9 | Unsigned32 (10..100000) | RC | |
column · Unsigned32 (10..100000) · read-create · current The value of tmnxLagBfdFamReceiveInterval specifies the receive timers for the BFD packets.
| ||||
| CtmnxLagBfdFamMultiplier | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.10 | Unsigned32 (3..20) | RC | |
column · Unsigned32 (3..20) · read-create · current The value of tmnxLagBfdFamMultiplier specifies the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down. | ||||
| CtmnxLagBfdFamMaxSetupTime | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.11 | Integer32 (-1 | 0..60000) | RC | |
column · Integer32 (-1 | 0..60000) · read-create · current The value of tmnxLagBfdFamMaxSetupTime specifies the maximum time the system will behave as if the micro-BFD session were 'Up', regardless of the actual state of the micro-BFD session being established. When a link becomes available, its LACP state immediately transitions from Standby to Active and the system starts to use it for transmission, assuming that the micro-BFD session setup will succeed. When the micro-BFD session state becomes 'Up', this timer is stopped. After the tmnxLagBfdFamMaxSetupTime has elapsed, the state of the micro-BFD session is evaluated to decide the LACP state of the new link. The value '-1' specifies infinity: the state of the micro-BFD session is ignored forever.
| ||||
| CtmnxLagBfdFamMaxAdminDownTime | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.12 | Integer32 (-1 | 0..3600) | RC | |
column · Integer32 (-1 | 0..3600) · read-create · current The value of tmnxLagBfdFamMaxAdminDownTime specifies the maximum time the system will continue to behave as if the micro-BFD session was 'Up', after the remote system has signalled it as administratively down by means of the 'AdminDown' State indication in the header of the BFD Control packets. This allows the administrator of this system some time to disable or deprovision the micro-BFD session before this system stops transmission on the link. The value '-1' specifies infinity: the 'AdminDown' State indication is ignored forever.
| ||||
| CtmnxLagBfdFamBfdOnDistributing | 1.3.6.1.4.1.6527.3.1.2.15.50.2.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tmnxLagBfdFamBfdOnDistributing specifies if BFD is started only on links in LACP 'distributing' state. While the value of tmnxLagBfdFamBfdOnDistributing is equal to 'true', BFD is started only on links in LACP 'distributing' state. While the value of tmnxLagBfdFamBfdOnDistributing is equal to 'false', BFD is started on all links. | ||||
| TtmnxLagBfdMemTable | 1.3.6.1.4.1.6527.3.1.2.15.50.3 | NA | ||
table · not-accessible · current The tmnxLagBfdMemTable extends the tLagMemberTable with BFD specific features. Conceptual rows are automatically created when a port is provisioned as part of a LAG. | ||||
| RtmnxLagBfdMemEntry | 1.3.6.1.4.1.6527.3.1.2.15.50.3.1 | NA | ||
row · not-accessible · current Each row entry represents BFD-specific information about a particular port in a LAG.
| ||||
| CtmnxLagBfdMemState | 1.3.6.1.4.1.6527.3.1.2.15.50.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tmnxLagBfdMemState indicates the state of the micro-BFD
session of this port in this LAG.
Possible states are:
idle : there is no BFD session;
failed : the creation of the BFD session failed, while not
forwarding;
failedFwd : the creation of the BFD session failed, while
forwarding;
waiting : waiting for the BFD session to come up for the first time,
while not forwarding traffic;
waitingFwd : waiting for the BFD session to come up for the first time,
while forwarding traffic;
up : the BFD session is really Up, or considered Up;
down : the BFD session is really Down, or considered Down.
For the meaning of 'considered Up' and 'considered Down', refer to the
descriptions of the objects tmnxLagBfdFamMaxSetupTime and
tmnxLagBfdFamMaxAdminDownTime.
This port is forwarding traffic in the states
- idle,
- failed,
- waitingFwd and
- up;
it is not forwarding traffic in the states
- waiting,
- down.
| ||||
| CtmnxLagBfdMemSetupTimeLeft | 1.3.6.1.4.1.6527.3.1.2.15.50.3.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxLagBfdMemSetupTimeLeft indicates the setup time left. The value zero indicates that the setup timer is not running. Refer to the description of the object tmnxLagBfdFamMaxSetupTime.
| ||||
| CtmnxLagBfdMemAdminDownLeft | 1.3.6.1.4.1.6527.3.1.2.15.50.3.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tmnxLagBfdMemAdminDownLeft indicates the time left before this system will react upon the 'AdminDown' State indication. The value zero indicates that the timer is not running. Refer to the description of the object tmnxLagBfdFamMaxAdminDownTime.
| ||||
| NtLagNotifyPrefix | 1.3.6.1.4.1.6527.3.1.3.15 | |||
| NtLagNotifications | 1.3.6.1.4.1.6527.3.1.3.15.0 | |||
| !tLagDynamicCostOn | 1.3.6.1.4.1.6527.3.1.3.15.0.1 | |||
notification · current the number of physical ports in the Link Aggregation Group is less than or equal to tLagPortThreshold value.
| ||||
| !tLagDynamicCostOff | 1.3.6.1.4.1.6527.3.1.3.15.0.2 | |||
notification · current the number of physical ports in the Link Aggregation Group is greater than tLagPortThreshold value.
| ||||
| !tLagPortAddFailed | 1.3.6.1.4.1.6527.3.1.3.15.0.3 | |||
notification · current tLagPortAddFailed notification is generated when a port could not be added to the lag. tLagNotifyPortAddFailReason contains the reason for failure. | ||||
| !tLagSubGroupSelected | 1.3.6.1.4.1.6527.3.1.3.15.0.4 | |||
notification · current The tLagSubGroupSelected notification is sent when the selection algorithm selects a different sub-group.
| ||||
| !tLagPortAddFailureCleared | 1.3.6.1.4.1.6527.3.1.3.15.0.5 | |||
notification · current tLagPortAddFailureCleared notification is generated when the failure, reported by tLagPortAddFailed, has been resolved. | ||||
| !tLagStateEvent | 1.3.6.1.4.1.6527.3.1.3.15.0.6 | |||
notification · current tLagStateEvent notification is generated when an event occurs that might influence the lag state. | ||||
| !tLagMemberStateEvent | 1.3.6.1.4.1.6527.3.1.3.15.0.7 | |||
notification · current tLagMemberStateEvent notification is generated when an event occurs on this member that might influence the lag state. | ||||
| !tmnxLagBfdMemStateChanged | 1.3.6.1.4.1.6527.3.1.3.15.0.8 | |||
notification · current [CAUSE] The tmnxLagBfdMemStateChanged notification is sent when the value of an instance of the object tmnxLagBfdMemState changes. The cause is explained in the tLagNotifyAdditionalInfo. [EFFECT] While the value of the object tmnxLagBfdMemState is equal to - 'idle', 'failed', 'waitingFwd', 'up': the port is forwarding traffic; - 'waiting', 'down': the port is not forwarding traffic. [RECOVERY] The recovery action will depend on the actual cause as specified in the tLagNotifyAdditionalInfo. | ||||
| !tLagAdaptiveLoadbalancingChanged | 1.3.6.1.4.1.6527.3.1.3.15.0.9 | |||
notification · current [CAUSE] The tLagAdaptiveLoadbalancingChanged is sent when the re-balancing algorithm modifies the LAG hash bucket allocation. [EFFECT] A better loadbalancing of the egress traffic on the active lag members. [RECOVERY] No special recovery action is necessary. | ||||
Textual conventions
LAGSubgroupInteger32 (-2 | -1 | 1..8)This type specifies a LAG subgroup. The value -2 denotes 'auto-iom', whereby the subgroup is defined based on the IOM (i.e. all ports of the same IOM are assigned to the same subgroup). The value -1 denotes 'auto-mda', whereby the subgroup is defined based on the MDA.
Traps / Notifications
- tLagAdaptiveLoadbalancingChanged
1.3.6.1.4.1.6527.3.1.3.15.0.9 - tLagDynamicCostOff
1.3.6.1.4.1.6527.3.1.3.15.0.2 - tLagDynamicCostOn
1.3.6.1.4.1.6527.3.1.3.15.0.1 - tLagMemberStateEvent
1.3.6.1.4.1.6527.3.1.3.15.0.7 - tLagPortAddFailed
1.3.6.1.4.1.6527.3.1.3.15.0.3 - tLagPortAddFailureCleared
1.3.6.1.4.1.6527.3.1.3.15.0.5 - tLagStateEvent
1.3.6.1.4.1.6527.3.1.3.15.0.6 - tLagSubGroupSelected
1.3.6.1.4.1.6527.3.1.3.15.0.4 - tmnxLagBfdMemStateChanged
1.3.6.1.4.1.6527.3.1.3.15.0.8
Groups and compliance
- tmnxLagAccessV14v0Group
- tmnxLagBfdGroup
- tmnxLagBfdNotifGroup
- tmnxLagHsmdaV6v0Group
- tmnxLagIndependentMuxGroup
- tmnxLagInstanceV4v0Group
- tmnxLagInstanceV5v0Group
- tmnxLagInstanceV6v0Group
- tmnxLagInstanceV7v0Group
- tmnxLagInstanceV9v0Group
- tmnxLagMixed10g100gV12v0Group
- tmnxLagNotificationsGroup
- tmnxLagNotifyObjsGroup
- tmnxLagNotifyObjsV10v0Group
- tmnxLagNotifyObjsV5v0Group
- tmnxLagPerFpSapV12v0Group
- tmnxLagPerLinkHashV12v0Group
- tmnxLagSelectionHoldV12v0Group
- tmnxLagV10v0Compliance
- tmnxLagV10v0NotifGroup
- tmnxLagV11v0Compliance
- tmnxLagV11v0Group
- tmnxLagV12v0Compliance
- tmnxLagV13v0Compliance
- tmnxLagV13v0Group
- tmnxLagV14v0Compliance
- tmnxLagV16v0Compliance
- tmnxLagV16v0Group
- tmnxLagV19v0Compliance
- tmnxLagV19v0Group
- tmnxLagV20v0Compliance
- tmnxLagV20v0Group
- tmnxLagV20v0NotifGroup
- tmnxLagV4v0Compliance
- tmnxLagV5v0Compliance
- tmnxLagV5v0NotifGroup
- tmnxLagV6v0Compliance
- tmnxLagV6v0NotifGroup
- tmnxLagV6v1Compliance
- tmnxLagV7v0Compliance
- tmnxLagV7v0Group
- tmnxLagV8v0Compliance
- tmnxLagV8v0Group
- tmnxLagV9v0Compliance
- tmnxObsoletedObjectsV4v0Group
- tmnxObsoletedObjectsV7v0Group