TROPIC-SYSTEM-MIB
Nokia (Formerly 'Alcatel-Lucent')The system MIB for Nokia network elements.
snmptranslate -m TROPIC-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m TROPIC-SYSTEM-MIB <host> 1.3.6.1.4.1.7483.1.1.2.1.1Imports
| IF-MIB | ifIndex |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv6, InetAddressPrefixLength, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMP-TARGET-MIB | snmpTargetAddrEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TN-TC-MIB | TmnxEnabledDisabled, TnSwitchID |
| TROPIC-GLOBAL-REG | tnSystemMIB, tnSystemModules |
| TROPIC-L1SERVICE-MIB | tnEthIfIndex, tnNetIfIndex |
| TROPIC-TC | AluWdmCardCapacity, AluWdmDisabledEnabled, AluWdmEnabledDisabled, AluWdmNewTransferProtocol, AluWdmTransferProtocol, TnCommand, TropicAdminStateType, TropicOperationalStateType, TropicResetType, TropicSourceIpModeValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ItnSystemMibModule | 1.3.6.1.4.1.7483.1.1.2.1.1 | ||||||||||||
identity The system MIB for Nokia network elements. | |||||||||||||
| NtnSystemConf | 1.3.6.1.4.1.7483.2.1.1.1 | ||||||||||||
| NtnSystemGroups | 1.3.6.1.4.1.7483.2.1.1.1.1 | ||||||||||||
| GtnSystemBasicsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.1 | ||||||||||||
group · current A collection of objects providing basic system extensions.
| |||||||||||||
| GtnSystemControlNetworkGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.2 | ||||||||||||
group · current A collection of objects providing basic system extensions.
| |||||||||||||
| GtnSystemRedundancyGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.3 | ||||||||||||
group · current A collection of objects providing basic system extensions. | |||||||||||||
| GtnSystemDiscoveryGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.4 | ||||||||||||
group · current A collection of objects providing System Discovery.
| |||||||||||||
| GtnSystemLoggingGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.5 | ||||||||||||
| GtnSystemBackupAndRestoreGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.6 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysNtpGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.7 | ||||||||||||
| GtnSysNtpServerGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.8 | ||||||||||||
group · current . | |||||||||||||
| GtnSnmpTargetAddressGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.9 | ||||||||||||
group · current . | |||||||||||||
| GtnSyslogGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.10 | ||||||||||||
group · current . | |||||||||||||
| GtnSysTimingGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.11 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysFeaturesGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.12 | ||||||||||||
group · current . | |||||||||||||
| GtnSysFaultCorrelationGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.13 | ||||||||||||
| GtnSysErrorHandlingGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.14 | ||||||||||||
| GtnSysSecurityGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.15 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysTransferLogGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.16 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysIpAclSysDefaultGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.17 | ||||||||||||
group · current . | |||||||||||||
| GtnSysIpAclPatternScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.18 | ||||||||||||
| GtnSysIpAclPatternGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.19 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysIpAclFilterScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.20 | ||||||||||||
| GtnSysIpAclFilterGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.21 | ||||||||||||
group · current . | |||||||||||||
| GtnSysIpAclInterfaceScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.22 | ||||||||||||
| GtnSysIpAclInterfaceGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.23 | ||||||||||||
| GtnSysNtpServerIdStatsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.24 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysFtpServerGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.25 | ||||||||||||
| GtnSysNtpServerAuthenticationScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.26 | ||||||||||||
| GtnSysNtpServerAuthenticationGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.27 | ||||||||||||
group · current . | |||||||||||||
| GtnSysIpAclNetIfFilterScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.28 | ||||||||||||
| GtnSysIpAclNetIfFilterGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.29 | ||||||||||||
group · current . | |||||||||||||
| GtnNeDiscoveryScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.30 | ||||||||||||
| GtnNeDiscoveryGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.31 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysOtdrScanSystemProfileScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.32 | ||||||||||||
| GtnSysOtdrScanSystemProfileGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.33 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysOtdrScanTransferGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.34 | ||||||||||||
group · current .
| |||||||||||||
| GtnClusterGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.35 | ||||||||||||
group · current . | |||||||||||||
| GtnSysPmFetchBulkGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.36 | ||||||||||||
| GtnSysDebugTransferGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.37 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysLicenseInvGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.38 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysLinuxGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.40 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysIpAclIpv6SysDefaultGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.41 | ||||||||||||
| GtnSysFileInitializationGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.42 | ||||||||||||
| GtnSysOtdrScanSystemProfileMScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.43 | ||||||||||||
| GtnSysOtdrScanSystemProfileMGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.44 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysSecurityScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.45 | ||||||||||||
| GtnSysIpAclIpv6PatternScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.46 | ||||||||||||
| GtnSysIpAclIpv6PatternGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.47 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysIpAclIpv6FilterScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.48 | ||||||||||||
| GtnSysIpAclIpv6FilterGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.49 | ||||||||||||
| GtnSysIpAclIpv6InterfaceScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.50 | ||||||||||||
| GtnSysIpAclIpv6InterfaceGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.51 | ||||||||||||
| GtnSysIpv6AclNetIfFilterScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.52 | ||||||||||||
| GtnSysIpv6AclNetIfFilterGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.53 | ||||||||||||
| GtnSysIpAclEthIfFilterScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.54 | ||||||||||||
| GtnSysIpAclEthIfFilterGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.55 | ||||||||||||
group · current . | |||||||||||||
| GtnSysIpv6AclEthIfFilterScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.56 | ||||||||||||
| GtnSysIpv6AclEthIfFilterGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.57 | ||||||||||||
| GtnSysBtInterfaceGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.58 | ||||||||||||
| GtnSysOtdrScanResultsTransferGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.59 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysLicenseMgrGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.60 | ||||||||||||
group · current .
| |||||||||||||
| GtnLicenseEntityGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.61 | ||||||||||||
group · current . | |||||||||||||
| GtnSysKeyStoreServiceGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.62 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysKeyStoreCertInfoGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.63 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysBgpPeerGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.64 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysDiscoverMeGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.65 | ||||||||||||
| GtnSyslogServerGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.66 | ||||||||||||
| GtnLicenseEntitlementGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.67 | ||||||||||||
| GtnPctObjsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.68 | ||||||||||||
group · current . | |||||||||||||
| GtnHostKeyGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.69 | ||||||||||||
| GtnSshPrivKeyGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.70 | ||||||||||||
| GtnSysNESshKeyGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.71 | ||||||||||||
| GtnNESshKeyGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.72 | ||||||||||||
| GtnTransferSysLogGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.73 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysHealthCareGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.74 | ||||||||||||
group · current .
| |||||||||||||
| GtnSshCiphersGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.75 | ||||||||||||
| GtnSshHostKeyGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.76 | ||||||||||||
| GtnSshMacsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.77 | ||||||||||||
| GtnSshKexGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.78 | ||||||||||||
| GtnSshPubKeyGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.79 | ||||||||||||
| GtnTlsProfileGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.80 | ||||||||||||
group · current . | |||||||||||||
| GtnSysTrapThrottlingGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.81 | ||||||||||||
| GtnSanListGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.82 | ||||||||||||
| GtnCsrSanListGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.83 | ||||||||||||
| GtnSanListAuthGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.84 | ||||||||||||
| GtnSysNmsIpListGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.85 | ||||||||||||
group · current . | |||||||||||||
| GtnOcspProfileGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.86 | ||||||||||||
group · current . | |||||||||||||
| GtnSysDnsServerGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.87 | ||||||||||||
group · current . | |||||||||||||
| GtnTransferPMDiscoveryGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.88 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysIpAclScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.89 | ||||||||||||
| GtnSysIpAclGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.90 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysIpv6AclGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.91 | ||||||||||||
group · current .
| |||||||||||||
| GtnSysIpv6AclScalarsGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.92 | ||||||||||||
| GtnSshProfileGroup | 1.3.6.1.4.1.7483.2.1.1.1.1.93 | ||||||||||||
| NtnSystemCompliances | 1.3.6.1.4.1.7483.2.1.1.1.2 | ||||||||||||
| MtnSystemCompliance | 1.3.6.1.4.1.7483.2.1.1.1.2.1 | ||||||||||||
compliance · current The compliance statement for System Extensions.
| |||||||||||||
| NtnSystemObjs | 1.3.6.1.4.1.7483.2.1.1.2 | ||||||||||||
| NtnSysBasics | 1.3.6.1.4.1.7483.2.1.1.2.1 | ||||||||||||
| StnSysDescr | 1.3.6.1.4.1.7483.2.1.1.2.1.1 | SnmpAdminString (SIZE (0..255)) | RW | SNMP Location | |||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current System's Description. Example values from LibreNMS test devices
| |||||||||||||
| StnSysTelnetPort | 1.3.6.1.4.1.7483.2.1.1.2.1.2 | Unsigned32 (1..65535) | RO | ||||||||||
scalar · Unsigned32 (1..65535) · read-only · current System's Telnet Port. | |||||||||||||
| StnSysHttpPort | 1.3.6.1.4.1.7483.2.1.1.2.1.3 | Unsigned32 (1..65535) | RO | ||||||||||
scalar · Unsigned32 (1..65535) · read-only · current System's Http Port. | |||||||||||||
| StnSysDateAndTime | 1.3.6.1.4.1.7483.2.1.1.2.1.4 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current System's Date and Time. | |||||||||||||
| StnSysReset | 1.3.6.1.4.1.7483.2.1.1.2.1.5 | TropicResetType | RW | ||||||||||
scalar · TropicResetType · read-write · current System reset. | |||||||||||||
| StnSysMIBVersion | 1.3.6.1.4.1.7483.2.1.1.2.1.6 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current The current version of the Nokia proprietary MIBs. | |||||||||||||
| StnSysRingID | 1.3.6.1.4.1.7483.2.1.1.2.1.7 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Current configurable range: 0 to 62. | |||||||||||||
| StnSysNetworkElementID | 1.3.6.1.4.1.7483.2.1.1.2.1.8 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Current configurable range: 0 to 30. | |||||||||||||
| StnSysAINSDebounceTime | 1.3.6.1.4.1.7483.2.1.1.2.1.9 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current This attribute must be set in multiples of 60s. Current configurable range: 1m to 96h 0m.
| |||||||||||||
| StnSysSonetSdhMode | 1.3.6.1.4.1.7483.2.1.1.2.1.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sonet/SDH Mode.
| |||||||||||||
| StnSysAlarmReportingControl | 1.3.6.1.4.1.7483.2.1.1.2.1.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Alarm reporting control.
| |||||||||||||
| StnSysWavelengthTrackerWaveKeySpace | 1.3.6.1.4.1.7483.2.1.1.2.1.12 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Current configurable range: 0 to 255. | |||||||||||||
| StnSysSecureMode | 1.3.6.1.4.1.7483.2.1.1.2.1.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Secure mode inherited from 1696R. For 1830 secure mode, use tnSysSecurityMode.
| |||||||||||||
| StnSysExtendedTemperatureRange | 1.3.6.1.4.1.7483.2.1.1.2.1.16 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Extended temperature range for 1830 PSS-1. | |||||||||||||
| StnSysTemperatureInCelsius | 1.3.6.1.4.1.7483.2.1.1.2.1.17 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysName | 1.3.6.1.4.1.7483.2.1.1.2.1.18 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This is to replace sysName, so that the system ID may have characters outside of those supported by DisplayString. | |||||||||||||
| StnSysEquipmentControllerCapacity | 1.3.6.1.4.1.7483.2.1.1.2.1.19 | AluWdmCardCapacity | RW | ||||||||||
scalar · AluWdmCardCapacity · read-write · current The capacity of the storage medium of the Equipment Controller cards in the node. | |||||||||||||
| StnSysFirstLevelControllerCapacity | 1.3.6.1.4.1.7483.2.1.1.2.1.20 | AluWdmCardCapacity | RW | ||||||||||
scalar · AluWdmCardCapacity · read-write · current The capacity of the storage medium of the First Level Controller cards in the node. | |||||||||||||
| StnSysMatrix0CompactCapacity | 1.3.6.1.4.1.7483.2.1.1.2.1.21 | AluWdmCardCapacity | RW | ||||||||||
scalar · AluWdmCardCapacity · read-write · current The capacity of the storage medium of the Matrix0 Compact cards in the node. | |||||||||||||
| StnSysUniversalMatrixFirstLevelControllerCapacity | 1.3.6.1.4.1.7483.2.1.1.2.1.22 | AluWdmCardCapacity | RW | ||||||||||
scalar · AluWdmCardCapacity · read-write · current The capacity of the storage medium of the Universal Matrix First Level Controller cards in the node. | |||||||||||||
| StnSysTimeOffsetTimeZone | 1.3.6.1.4.1.7483.2.1.1.2.1.23 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current . | |||||||||||||
| StnSysSwitchId | 1.3.6.1.4.1.7483.2.1.1.2.1.26 | TnSwitchID | NA | ||||||||||
scalar · TnSwitchID · not-accessible · current An identifier that uniquely identifies a switching domain on the PSS. | |||||||||||||
| StnSysFipsSquelchMode | 1.3.6.1.4.1.7483.2.1.1.2.1.27 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current FIPS Squelch mode. If set to FIPS, it causes transmission loss on all encrypted links if FIPS selftest fails.
| |||||||||||||
| StnSysOtdrListOfFileNames | 1.3.6.1.4.1.7483.2.1.1.2.1.28 | SnmpAdminString (SIZE (0..2047)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..2047)) · read-only · current This contains a list of all the OTDR file names that are stored on NE. The maximum number of files is 32. The file names are separated by newlines. The format of a file name is: Filenamewhichis34charslong_sh_sl_pt_yyyymmdd_hr-min-sec Here is an example: profile1_1_6_1_20140416_21-20-3. | |||||||||||||
| StnSysOtdrFileCounts | 1.3.6.1.4.1.7483.2.1.1.2.1.29 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This returns the number of files under OTDR. | |||||||||||||
| StnSysAltitude | 1.3.6.1.4.1.7483.2.1.1.2.1.30 | Unsigned32 (0..8000) | RW | ||||||||||
scalar · Unsigned32 (0..8000) · read-write · current This is used for FAN control and for filter clogging rate calculation.
| |||||||||||||
| StnSysThermalShutdownAutotimer | 1.3.6.1.4.1.7483.2.1.1.2.1.31 | Integer32 (-1..3600) | RW | ||||||||||
scalar · Integer32 (-1..3600) · read-write · current Configures the time when the mode of thermal is automatically restarted.
| |||||||||||||
| StnSysDisplayShelfLabel | 1.3.6.1.4.1.7483.2.1.1.2.1.32 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysPMFineGranularityControl | 1.3.6.1.4.1.7483.2.1.1.2.1.33 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables network element for fine granularity PM operation.
| |||||||||||||
| StnSysFmRead | 1.3.6.1.4.1.7483.2.1.1.2.1.34 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enables System Ready notification. | |||||||||||||
| StnSysPMStreamingServerControl | 1.3.6.1.4.1.7483.2.1.1.2.1.35 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables network element for streaming server control PM operation.
| |||||||||||||
| StnSysSlotMigrationControl | 1.3.6.1.4.1.7483.2.1.1.2.1.36 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Slot Migration Control.
| |||||||||||||
| StnSysFlexGridClusterOcsAddDropEnabled | 1.3.6.1.4.1.7483.2.1.1.2.1.37 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enables the OCS/Cluster flex. | |||||||||||||
| StnSysFilterCheckTime | 1.3.6.1.4.1.7483.2.1.1.2.1.38 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Time in seconds when the filter check is executed everyday.
| |||||||||||||
| StnSysCNLinkPhysicalIfIndex | 1.3.6.1.4.1.7483.2.1.1.2.1.39 | SnmpAdminString (SIZE (0..168)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..168)) · read-write · current . | |||||||||||||
| StnSysUserlabel | 1.3.6.1.4.1.7483.2.1.1.2.1.40 | SnmpAdminString (SIZE (0..256)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..256)) · read-write · current User Label NE identifier. | |||||||||||||
| StnSysOpenAgentControl | 1.3.6.1.4.1.7483.2.1.1.2.1.41 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable the OpenAgent functionality on the NE.
| |||||||||||||
| StnSysUnkeyedDanglingOchAddDropEnabled | 1.3.6.1.4.1.7483.2.1.1.2.1.42 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Indicates if the unkeyed dangling optical channel add/drop capability is enabled. If false, unkeyed OCh add/drop cross-connections to SFD channel ports, PSC add/drop ports and MCS add/drop ports are not allowed. | |||||||||||||
| StnSysNetWorkTraceV3SecurityUser | 1.3.6.1.4.1.7483.2.1.1.2.1.43 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Network trace V3 SecurityUser.
| |||||||||||||
| StnSysScotV3SecurityUser | 1.3.6.1.4.1.7483.2.1.1.2.1.44 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PowerM V3 SecurityUser.
| |||||||||||||
| StnSysTL1Enable | 1.3.6.1.4.1.7483.2.1.1.2.1.45 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enable/Disable the TL1 connectivity on the NE. | |||||||||||||
| StnSysLMEnabled | 1.3.6.1.4.1.7483.2.1.1.2.1.46 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enable/Disable the CLM Functionality. | |||||||||||||
| StnSysAlienChannelLicensingEnabled | 1.3.6.1.4.1.7483.2.1.1.2.1.47 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enable/Disable the Alien channel licensing. | |||||||||||||
| StnSysDebug | 1.3.6.1.4.1.7483.2.1.1.2.1.48 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enable/Disable the access to debug port on network element. | |||||||||||||
| StnSysClusterV3SecurityUser | 1.3.6.1.4.1.7483.2.1.1.2.1.49 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Cluster V3 SecurityUser.
compatibilityMode - In Compatibility mode the Cluster
NE-to-NE Communication allow
communication with authentication
and privacy, but with fixed
passwords. The compatibility mode
shall be used when not all NEs in a
cluster running a release supporting
the Cluster NE-to-NE Communication
in the secure mode. This ensures
communication while upgrade (or
downgrade) scenarios. If all NEs in
a cluster supporting the secure mode
then the secure mode should be used.
secureMode - The secure mode uses authentication
and privacy with configurable
passwords only. Secure mode is the
recommended mode during normal
operation. Switching to secure mode
while not all network elements are
upgraded to a release supporting
Cluster NE-to-NE Communication security,
or while passwords are not set on all
network elements leads to communication
interruptions.
| |||||||||||||
| StnSysSyncMode | 1.3.6.1.4.1.7483.2.1.1.2.1.51 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current etsi/ansi Mode for Synchronization.
| |||||||||||||
| StnSysPMMode | 1.3.6.1.4.1.7483.2.1.1.2.1.52 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current etsi/ansi Mode for PM.
| |||||||||||||
| StnSysShelfLatitude | 1.3.6.1.4.1.7483.2.1.1.2.1.53 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current Shelf latitude. Free format to store the latitude part of GPS coordinates. | |||||||||||||
| StnSysShelfLongitude | 1.3.6.1.4.1.7483.2.1.1.2.1.54 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current Shelf longitude. Free format to store the longitude part of GPS coordinates. | |||||||||||||
| StnSysAlmProfName | 1.3.6.1.4.1.7483.2.1.1.2.1.55 | OCTET STRING (SIZE (1..40)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..40)) · read-write · current . | |||||||||||||
| StnSysBgpAsn | 1.3.6.1.4.1.7483.2.1.1.2.1.56 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Autonomous System Number which will enable BGP on the NE. Setting the ASN to 0 to disable BGP on the NE. Any ASN can be used, but the following ASNs will be for private use (RFC 6996) 64512 - 65534 (16-bit ASN) 4200000000 - 4294967294 (32-bit ASN). | |||||||||||||
| StnSysBgpLocalRouterId | 1.3.6.1.4.1.7483.2.1.1.2.1.57 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current . | |||||||||||||
| StnSysNodeIdLabel | 1.3.6.1.4.1.7483.2.1.1.2.1.58 | SnmpAdminString (SIZE (0..63)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..63)) · read-write · current . | |||||||||||||
| StnSysNodeNumber | 1.3.6.1.4.1.7483.2.1.1.2.1.59 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current . | |||||||||||||
| StnSysNodeCLLI | 1.3.6.1.4.1.7483.2.1.1.2.1.60 | SnmpAdminString (SIZE (0..11)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..11)) · read-write · current . | |||||||||||||
| StnSysNodeTemplate | 1.3.6.1.4.1.7483.2.1.1.2.1.61 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..64)) · read-write · current . | |||||||||||||
| StnSysCustomerApplicationMode | 1.3.6.1.4.1.7483.2.1.1.2.1.64 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysMDCli | 1.3.6.1.4.1.7483.2.1.1.2.1.65 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable the MDCLI functionality.
| |||||||||||||
| StnSysMultiShelfMode | 1.3.6.1.4.1.7483.2.1.1.2.1.66 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysMultiShelfConfigList | 1.3.6.1.4.1.7483.2.1.1.2.1.67 | SnmpAdminString (SIZE (0..1600)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..1600)) · read-only · current . | |||||||||||||
| StnSysMultiShelfUnknownList | 1.3.6.1.4.1.7483.2.1.1.2.1.68 | SnmpAdminString (SIZE (0..1600)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..1600)) · read-only · current . | |||||||||||||
| StnSysMultiShelfMissingList | 1.3.6.1.4.1.7483.2.1.1.2.1.69 | SnmpAdminString (SIZE (0..1600)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..1600)) · read-only · current . | |||||||||||||
| StnSysPrompt | 1.3.6.1.4.1.7483.2.1.1.2.1.70 | SnmpAdminString (SIZE (0..256)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..256)) · read-write · current . | |||||||||||||
| StnSysPromptType | 1.3.6.1.4.1.7483.2.1.1.2.1.71 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysShelfAltitude | 1.3.6.1.4.1.7483.2.1.1.2.1.72 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current Shelf altitude. Free format to store the altitude part of GPS coordinates. | |||||||||||||
| StnSysTacacsSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.73 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysRadiusSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.74 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysFtpSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.75 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysSftpSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.76 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysHttpSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.77 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysHttpsSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.78 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysSnmpSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.79 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysSyslogSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.80 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysSshSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.81 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysAutoTurnUpActiveTemplate | 1.3.6.1.4.1.7483.2.1.1.2.1.82 | SnmpAdminString (SIZE (0..256)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..256)) · read-write · current . | |||||||||||||
| StnSysAuthenticationOrder | 1.3.6.1.4.1.7483.2.1.1.2.1.83 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysAuthRejectOption | 1.3.6.1.4.1.7483.2.1.1.2.1.84 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysAutoTurnUpActiveTemplateForce | 1.3.6.1.4.1.7483.2.1.1.2.1.85 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysNtpSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.86 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysFeatureAutoTurnUp | 1.3.6.1.4.1.7483.2.1.1.2.1.87 | AluWdmDisabledEnabled | RW | ||||||||||
scalar · AluWdmDisabledEnabled · read-write · current Configure to enabled before automation line(s) can be enabled. Configure to disabled after all automation line(s) have been disabled. | |||||||||||||
| StnSysDelayResetNE | 1.3.6.1.4.1.7483.2.1.1.2.1.88 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current For Transient Condition: UsrColdResetPend (cleared automatically when controller comes back up active). | |||||||||||||
| StnSysDelayReboot | 1.3.6.1.4.1.7483.2.1.1.2.1.89 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Minimize the number of (warm) reboots during initial configuration (non-ZTP). | |||||||||||||
| StnSysNmsUserName | 1.3.6.1.4.1.7483.2.1.1.2.1.90 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..64)) · read-write · current The Nms user name. | |||||||||||||
| StnSysVersionPatchId | 1.3.6.1.4.1.7483.2.1.1.2.1.91 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| StnSysVersionPatchDescr | 1.3.6.1.4.1.7483.2.1.1.2.1.92 | SnmpAdminString (SIZE (0..2048)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..2048)) · read-only · current . | |||||||||||||
| StnSysCustomerLifeCycleState | 1.3.6.1.4.1.7483.2.1.1.2.1.93 | SnmpAdminString (SIZE (0..45)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..45)) · read-write · current . | |||||||||||||
| StnSysUSBInstall | 1.3.6.1.4.1.7483.2.1.1.2.1.94 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current true - to change boot order from USB port first and allow
SW installation from USB port.
false - to disable the USB port access for SW installation
and to change the boot order to SSD first. | |||||||||||||
| StnSysNmsIpVerifyState | 1.3.6.1.4.1.7483.2.1.1.2.1.95 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysOcspSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.96 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current Online Certificate Status Protocol IP Mode. | |||||||||||||
| StnSysDnsSourceIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.97 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current Domain Name System IP Mode. | |||||||||||||
| StnSysOtcWaitTimeAfterPowerChange | 1.3.6.1.4.1.7483.2.1.1.2.1.98 | Unsigned32 (60..3600) | RO | ||||||||||
scalar · Unsigned32 (60..3600) · read-only · current This attribute indicates how long the NMS shall wait after changing the output power of an external transponder managed with optical terminal control.
| |||||||||||||
| StnSysDHCPClassName | 1.3.6.1.4.1.7483.2.1.1.2.1.99 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current DHCP Class Name. | |||||||||||||
| StnSysDHCPMatchString | 1.3.6.1.4.1.7483.2.1.1.2.1.100 | SnmpAdminString (SIZE (0..512)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..512)) · read-write · current DHCP Match String. | |||||||||||||
| StnSysKeyLicense | 1.3.6.1.4.1.7483.2.1.1.2.1.101 | SnmpAdminString (SIZE (0..256)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..256)) · read-write · current Unique anti-theft license key stored on the NE. | |||||||||||||
| StnSysHwIfMode | 1.3.6.1.4.1.7483.2.1.1.2.1.102 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This parameter is used to select the variants of hardware
interface assignments. The configuration operation is
allowed only when the impacted ports (port speed is changed
after config) have the interface type='unassigned'.
nomate - the system has X1-X6 and C1-C24 ports - default
value.
mate100g - the system has X1-X6, C1-C24, M1(t24ps1), and M1
(t24ps2) ports. In this mode, C10-C15 allows
only the interface type with the port rate equal
or lower than 10Gbps
When changing from nomate to mate100g, C10-C15 must have the
interface type='unassigned';
When changing from mate100g to nomate, C10-C15, M1 (t24ps1)
and M1 (t24ps2) must have the interface type='unassigned'
| |||||||||||||
| StnSysIpAclNextIndex | 1.3.6.1.4.1.7483.2.1.1.2.1.103 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This parameter indicates the next available SNMP index for a IPACL rule to be created in tnSysIpAclTable. If there is no available index, zero shall be used. | |||||||||||||
| StnSysIpv6AclNextIndex | 1.3.6.1.4.1.7483.2.1.1.2.1.104 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This parameter indicates the next available SNMP index for a IPACL rule to be created in tnSysIpv6AclTable. If there is no available index, zero shall be used. | |||||||||||||
| StnSysDHCPClass | 1.3.6.1.4.1.7483.2.1.1.2.1.105 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysProtocolIpMode | 1.3.6.1.4.1.7483.2.1.1.2.1.106 | TropicSourceIpModeValue | RW | ||||||||||
scalar · TropicSourceIpModeValue · read-write · current . | |||||||||||||
| StnSysMultiShelfAvailableList | 1.3.6.1.4.1.7483.2.1.1.2.1.107 | SnmpAdminString (SIZE (0..1600)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..1600)) · read-only · current . | |||||||||||||
| StnSysPerformanceMemoryTotal | 1.3.6.1.4.1.7483.2.1.1.2.1.108 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| StnSysPerformanceMemoryUsed | 1.3.6.1.4.1.7483.2.1.1.2.1.109 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| StnSysPerformanceMemoryUsedPercentage | 1.3.6.1.4.1.7483.2.1.1.2.1.110 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| StnSysPerformanceTime | 1.3.6.1.4.1.7483.2.1.1.2.1.111 | SnmpAdminString (SIZE (0..32)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-only · current . | |||||||||||||
| StnSysPerformanceCPUStatsPercentages | 1.3.6.1.4.1.7483.2.1.1.2.1.112 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current Format: utilization%-user%-system%-nice%-I/O Wait%-Irq%-SoftIrq%-Idle%. Example: 4.68-1.92-2.70-0.00-0.00-0.06-0.00-95.32 | |||||||||||||
| StnSysPower | 1.3.6.1.4.1.7483.2.1.1.2.1.113 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Power state of the system.
| |||||||||||||
| StnSysKeyStoreCertExpiration | 1.3.6.1.4.1.7483.2.1.1.2.1.114 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysNumOspfV2AreaIndependentLsas | 1.3.6.1.4.1.7483.2.1.1.2.1.115 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current . | |||||||||||||
| StnSysNumOspfV3AreaIndependentLsas | 1.3.6.1.4.1.7483.2.1.1.2.1.116 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current . | |||||||||||||
| StnSysBgpAdminDistance | 1.3.6.1.4.1.7483.2.1.1.2.1.117 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| NtnSysControlNetwork | 1.3.6.1.4.1.7483.2.1.1.2.2 | ||||||||||||
| StnSysIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.2.1 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current System's IP Address. | |||||||||||||
| StnSysSubnetMask | 1.3.6.1.4.1.7483.2.1.1.2.2.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current Subnet Mask. | |||||||||||||
| StnSysConfiguredIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.2.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysConfiguredSubnetMask | 1.3.6.1.4.1.7483.2.1.1.2.2.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysConfiguredSnmpSource | 1.3.6.1.4.1.7483.2.1.1.2.2.5 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current When set to false, SNMP requests can be made using any of the NEs interface IP addresses or Loopback IP address. The source IP address in SNMP trap/reply messages shall be the interface IP address on which the packet leaves the NE. Hence it is the SNMP clients responsibility to be able to associate an NE with multiple IP addresses. When set to true, SNMP requests can be made using ONLY the NEs Loopback IP address. The source IP address in SNMP trap/reply messages shall be fixed as the Loopback IP. Hence SNMP clients need only have a single association to the NEs Loopback IP address. | |||||||||||||
| StnSysConfiguredOcsIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.2.6 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Optical Cross-connect System (OCS) IP address. R9.0: We now support two OCS Nodes(WDMx2OCS) and this mib is meant for OCS node. | |||||||||||||
| StnSysConfiguredOcs2IpAddress | 1.3.6.1.4.1.7483.2.1.1.2.2.7 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Optical Cross-connect System (OCS) IP address. R9.0: we now support upto three OCS Nodes(WDMx3OCS) and this attribute is meant for 2nd OCS node. | |||||||||||||
| StnSysConfiguredOcs3IpAddress | 1.3.6.1.4.1.7483.2.1.1.2.2.8 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Optical Cross-connect System (OCS) IP address. R9.0: we now support upto three OCS Nodes(WDMx3OCS) and this mib is meant for 3rd OCS node. | |||||||||||||
| StnSysOcs1LinkStatus | 1.3.6.1.4.1.7483.2.1.1.2.2.9 | AluWdmOcsLinkStatus | RO | ||||||||||
scalar · AluWdmOcsLinkStatus · read-only · current Shows the link status of 1st Optical Cross-connect System(OCS). | |||||||||||||
| StnSysOcs2LinkStatus | 1.3.6.1.4.1.7483.2.1.1.2.2.10 | AluWdmOcsLinkStatus | RO | ||||||||||
scalar · AluWdmOcsLinkStatus · read-only · current Shows the link status of 2nd Optical Cross-connect System(OCS). | |||||||||||||
| StnSysOcs3LinkStatus | 1.3.6.1.4.1.7483.2.1.1.2.2.11 | AluWdmOcsLinkStatus | RO | ||||||||||
scalar · AluWdmOcsLinkStatus · read-only · current Shows the link status of 3rd Optical Cross-connect System(OCS). | |||||||||||||
| StnSysConfiguredRadiusSource | 1.3.6.1.4.1.7483.2.1.1.2.2.12 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current When set to true, the radius client will only use the Loopback IP. | |||||||||||||
| StnSysConfiguredLoopbackIp1 | 1.3.6.1.4.1.7483.2.1.1.2.2.13 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysConfiguredLoopbackIp1SubnetMask | 1.3.6.1.4.1.7483.2.1.1.2.2.14 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysConfiguredSnmpSource1 | 1.3.6.1.4.1.7483.2.1.1.2.2.15 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current When set to false, SNMP requests can be made using any of the NEs interface IP addresses or Loopback IP address. The source IP address in SNMP trap/reply messages shall be the interface IP address on which the packet leaves the NE. Hence it is the SNMP clients responsibility to be able to associate an NE with multiple IP addresses. When set to true, SNMP requests can be made using ONLY the NEs Loopback IP1 address. The source IP address in SNMP trap/reply messages shall be fixed as the Loopback IP1. Hence SNMP clients need only have a single association to the NEs Loopback IP1 address. | |||||||||||||
| StnSysConfiguredRadiusSource1 | 1.3.6.1.4.1.7483.2.1.1.2.2.16 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current When set to true, the radius client will only use the Loopback IP1. | |||||||||||||
| StnSysLoopbackIpAddress1 | 1.3.6.1.4.1.7483.2.1.1.2.2.17 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current . | |||||||||||||
| StnSysLoopbackIp1SubnetMask | 1.3.6.1.4.1.7483.2.1.1.2.2.18 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current . | |||||||||||||
| StnSysConfiguredInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.2.19 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysConfiguredInetAddress. | |||||||||||||
| StnSysConfiguredInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.2.20 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the Loopback IP | |||||||||||||
| StnSysConfiguredPrefixLength | 1.3.6.1.4.1.7483.2.1.1.2.2.21 | InetAddressPrefixLength | RW | ||||||||||
scalar · InetAddressPrefixLength · read-write · current Prefix length of the IPV6 of the Loopback. | |||||||||||||
| StnSysOcsIp1Password | 1.3.6.1.4.1.7483.2.1.1.2.2.22 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The password used to access OCS NE. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysOcsIp2Password | 1.3.6.1.4.1.7483.2.1.1.2.2.23 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The password used to access OCS NE. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysOcsIp3Password | 1.3.6.1.4.1.7483.2.1.1.2.2.24 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The password used to access OCS NE. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysConfiguredSnmpSourceIPv6 | 1.3.6.1.4.1.7483.2.1.1.2.2.25 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current When set to false, SNMP requests can be made using any of the NEs interface IP addresses or Loopback IPv6 address. The source IP address in SNMP trap/reply messages shall be the interface IP address on which the packet leaves the NE. Hence it is the SNMP clients responsibility to be able to associate an NE with multiple IP addresses. When set to true, SNMP requests can be made using ONLY the NEs Loopback IPv6 address. The source IP address in SNMP trap/reply messages shall be fixed as the Loopback IP. Hence SNMP clients need only have a single association to the NEs Loopback IPv6 address. | |||||||||||||
| StnSysConfiguredRadiusSourceIPv6 | 1.3.6.1.4.1.7483.2.1.1.2.2.26 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current When set to true, the radius client will only use the Loopback IPv6. | |||||||||||||
| NtnSysRedundancy | 1.3.6.1.4.1.7483.2.1.1.2.3 | ||||||||||||
| StnSysRedundancyDbSynchState | 1.3.6.1.4.1.7483.2.1.1.2.3.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysRedundancyDbResynch | 1.3.6.1.4.1.7483.2.1.1.2.3.2 | TnCommand | RW | ||||||||||
scalar · TnCommand · read-write · current . | |||||||||||||
| StnSysRedundancyDbAudit | 1.3.6.1.4.1.7483.2.1.1.2.3.3 | TnCommand | RW | ||||||||||
scalar · TnCommand · read-write · current . | |||||||||||||
| StnSysRedundancyDbClear | 1.3.6.1.4.1.7483.2.1.1.2.3.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysRedundancyActiveCCSlot | 1.3.6.1.4.1.7483.2.1.1.2.3.5 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current . | |||||||||||||
| StnSysRedundancyDbInvalid | 1.3.6.1.4.1.7483.2.1.1.2.3.6 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current . | |||||||||||||
| StnSysRedundancyMateCCReadyToProtect | 1.3.6.1.4.1.7483.2.1.1.2.3.7 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current . | |||||||||||||
| NtnSysDiscovery | 1.3.6.1.4.1.7483.2.1.1.2.4 | ||||||||||||
| StnSysDiscoveryFilename | 1.3.6.1.4.1.7483.2.1.1.2.4.2 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current . | |||||||||||||
| StnSysDiscoveryMask | 1.3.6.1.4.1.7483.2.1.1.2.4.3 | Bits | RW | ||||||||||
scalar · Bits · read-write · current For a newly commissioned network element, the default bit set is stage5.
| |||||||||||||
| StnSysDiscoveryControl | 1.3.6.1.4.1.7483.2.1.1.2.4.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Controls the Discovery, i.e., starts or aborts it.
| |||||||||||||
| StnSysDiscoveryStatus | 1.3.6.1.4.1.7483.2.1.1.2.4.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysDiscoveryErrorCode | 1.3.6.1.4.1.7483.2.1.1.2.4.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysDiscoveryBinnedStatsInterval | 1.3.6.1.4.1.7483.2.1.1.2.4.8 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysDiscoveryBinnedStatsBin | 1.3.6.1.4.1.7483.2.1.1.2.4.9 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysDiscoveryServerProtocol | 1.3.6.1.4.1.7483.2.1.1.2.4.10 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current This attributes indicates the server protocol. | |||||||||||||
| StnSysDiscoveryServerIp | 1.3.6.1.4.1.7483.2.1.1.2.4.11 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysDiscoveryServerUserId | 1.3.6.1.4.1.7483.2.1.1.2.4.12 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The userId used to access the server. | |||||||||||||
| StnSysDiscoveryServerPassword | 1.3.6.1.4.1.7483.2.1.1.2.4.13 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The password used to access the server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysDiscoveryServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.4.14 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysDiscoveryServerInetAddress. | |||||||||||||
| StnSysDiscoveryServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.4.15 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the log server. | |||||||||||||
| StnSysDiscoveryPort | 1.3.6.1.4.1.7483.2.1.1.2.4.16 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current . | |||||||||||||
| StnSysDiscoveryPrevious15minBinFilesTransfer | 1.3.6.1.4.1.7483.2.1.1.2.4.17 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Indicates the number of previous 15 min bin files that needs to be transferred. | |||||||||||||
| StnSysDiscoveryPrevious1dayBinFilesTransfer | 1.3.6.1.4.1.7483.2.1.1.2.4.18 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Indicates the number of previous 1 day bin files that needs to be transferred. | |||||||||||||
| StnSysDiscoveryTransferTimeOffset | 1.3.6.1.4.1.7483.2.1.1.2.4.19 | Unsigned32 (0..899) | RW | ||||||||||
scalar · Unsigned32 (0..899) · read-write · current Indicates the file transfer time offset in seconds. | |||||||||||||
| StnSysDiscoveryTransferTraps | 1.3.6.1.4.1.7483.2.1.1.2.4.20 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Indicates whether the file transfer is triggered by the NE sending traps. | |||||||||||||
| NtnSysLogging | 1.3.6.1.4.1.7483.2.1.1.2.5 | ||||||||||||
| StnSysLoggingCLI | 1.3.6.1.4.1.7483.2.1.1.2.5.1 | Bits | RW | ||||||||||
scalar · Bits · read-write · current Each bit represents whether the appropriate logging is activated for each CLI security level.
| |||||||||||||
| StnSysLoggingSNMP | 1.3.6.1.4.1.7483.2.1.1.2.5.2 | Bits | RW | ||||||||||
scalar · Bits · read-write · current Each bit represents whether the appropriate logging is activated for each SNMP security level.
| |||||||||||||
| NtnSysBackupAndRestore | 1.3.6.1.4.1.7483.2.1.1.2.6 | ||||||||||||
| StnSysBackupAndRestoreCommand | 1.3.6.1.4.1.7483.2.1.1.2.6.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysBackupAndRestoreRemoteHostIp | 1.3.6.1.4.1.7483.2.1.1.2.6.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysBackupAndRestoreRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.6.3 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current . | |||||||||||||
| StnSysBackupAndRestoreStatus | 1.3.6.1.4.1.7483.2.1.1.2.6.4 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current This attribute indicates the status of the
previously executed tnSysBackupAndRestoreCommand
operation. Here are the status strings:
* Success
* Failed - no such record instance
* Failed - timed out
* Failed - invalid record size
* Failed - invalid record type
* Remote backup in progress
* Remote restore in progress
* Failed - remote path exceeds the max length
of 127 characters
* Failed - for restore the remote path must
specify a file
* Failed - restored database was corrupt or
was created on a different node
* Failed - cannot backup or restore while
operation already in progress
* Failed - backup or restore failed to complete
due to a reset
* Failed - restored database missing GMRE
database (forced to override)
* Failed - local error
* Failed - network error
* Failed - Remote server error
* Failed - invalid database backup file
* Failed - Invalid remote server IP address not set
* Failed - Error
* Failed - Authorization failed
* Failed - File permission(s) failed
* Failed - <Unknown database error code> | |||||||||||||
| StnSysBackupAndRestoreLastBackupFilename | 1.3.6.1.4.1.7483.2.1.1.2.6.5 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current This attribute indicates the filename for the last backup performed on the node. If none exists, this attribute will return an empty string. If a backup is in progress, this attribute will return an empty string. | |||||||||||||
| StnSysBackupAndRestoreLastCommand | 1.3.6.1.4.1.7483.2.1.1.2.6.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This is the last backup and restore command executed. If the last operation is unknown, the value of this attribute will be unknown. If a backup and restore command has not been executed since the last node reset, the value of this attribute will be noCommand.
| |||||||||||||
| StnSysBackupAndRestorePercentCompleted | 1.3.6.1.4.1.7483.2.1.1.2.6.7 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The percent completion of the previously executed operation. | |||||||||||||
| StnSysBackupAndRestoreLastBackupFileTimeStamp | 1.3.6.1.4.1.7483.2.1.1.2.6.8 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The date and time when the last backup was completed. | |||||||||||||
| StnSysBackupAndRestoreProtocol | 1.3.6.1.4.1.7483.2.1.1.2.6.9 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current This attributes indicates the database Backup and restore protocol. | |||||||||||||
| StnSysBackupAndRestoreUserId | 1.3.6.1.4.1.7483.2.1.1.2.6.10 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The userId used to access the backup and restore server. | |||||||||||||
| StnSysBackupAndRestorePassword | 1.3.6.1.4.1.7483.2.1.1.2.6.11 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The password used to access the backup and restore server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysBackupAndRestoreLastBackupFileCrc | 1.3.6.1.4.1.7483.2.1.1.2.6.12 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current 32-bit Cyclic Redundancy Code calculated over the backed-up data. | |||||||||||||
| StnSysBackupAndRestoreRemoteHostInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.6.14 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysBackupAndRestoreRemoteHostInetAddress. | |||||||||||||
| StnSysBackupAndRestoreRemoteHostInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.6.15 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the backup server. | |||||||||||||
| StnSysBackupAndRestoreLocalInfo | 1.3.6.1.4.1.7483.2.1.1.2.6.16 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Database local backup information. | |||||||||||||
| StnSysBackupAndRestoreLocalDelete | 1.3.6.1.4.1.7483.2.1.1.2.6.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Delete local database backup.
| |||||||||||||
| StnSysBackupAndRestorePort | 1.3.6.1.4.1.7483.2.1.1.2.6.19 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current This attributes indicates the database port. | |||||||||||||
| StnSysBackupAndRestoreFallBackTimeStamp | 1.3.6.1.4.1.7483.2.1.1.2.6.20 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current return the creation time of the Fallback DB. | |||||||||||||
| NtnSysNtp | 1.3.6.1.4.1.7483.2.1.1.2.7 | ||||||||||||
| StnSysNtpEnable | 1.3.6.1.4.1.7483.2.1.1.2.7.1 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current To enable or disable NTP client. | |||||||||||||
| StnSysNtpSynched | 1.3.6.1.4.1.7483.2.1.1.2.7.8 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current . | |||||||||||||
| StnSysNtpServerCurrentIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.7.9 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current . | |||||||||||||
| StnSysNtpDriftString | 1.3.6.1.4.1.7483.2.1.1.2.7.11 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current . | |||||||||||||
| StnSysNtpTimeOffsetString | 1.3.6.1.4.1.7483.2.1.1.2.7.12 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current . | |||||||||||||
| StnSysNtpClockMode | 1.3.6.1.4.1.7483.2.1.1.2.7.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current NTP clock mode.
| |||||||||||||
| StnSysNtpServerCurrentInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.7.14 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored tnSysNtpServerCurrentInetAddress. | |||||||||||||
| StnSysNtpServerCurrentInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.7.15 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address NTP server. | |||||||||||||
| NtnSysNtpServers | 1.3.6.1.4.1.7483.2.1.1.2.8 | ||||||||||||
| TtnSysNtpServerTable | 1.3.6.1.4.1.7483.2.1.1.2.8.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysNtpServerEntry | 1.3.6.1.4.1.7483.2.1.1.2.8.1.1 | NA | |||||||||||
| CtnSysNtpServerIndex | 1.3.6.1.4.1.7483.2.1.1.2.8.1.1.1 | Unsigned32 (1..8) | NA | ||||||||||
column · Unsigned32 (1..8) · not-accessible · current For the 1830 PSS-32, the maximum number of supported servers is 8. | |||||||||||||
| CtnSysNtpServerIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.8.1.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current This attribute is configurable only when the row status has been set to createAndGo. | |||||||||||||
| CtnSysNtpServerRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.8.1.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current . | |||||||||||||
| CtnSysNtpServerKeyIndex | 1.3.6.1.4.1.7483.2.1.1.2.8.1.1.4 | Unsigned32 (0..65535) | RC | ||||||||||
column · Unsigned32 (0..65535) · read-create · current . | |||||||||||||
| CtnSysNtpServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.8.1.1.5 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address of the NTP Server. | |||||||||||||
| CtnSysNtpServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.8.1.1.6 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnSysNtpServerInetAddress. | |||||||||||||
| NtnSnmpTargetAddresses | 1.3.6.1.4.1.7483.2.1.1.2.9 | ||||||||||||
| TtnSnmpTargetAddrTable | 1.3.6.1.4.1.7483.2.1.1.2.9.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSnmpTargetAddrEntry | 1.3.6.1.4.1.7483.2.1.1.2.9.1.1 | NA | |||||||||||
| CtnSnmpTargetAddrNmsStationGroupId | 1.3.6.1.4.1.7483.2.1.1.2.9.1.1.1 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current . | |||||||||||||
| CtnSnmpTargetAddrTrapGroupId | 1.3.6.1.4.1.7483.2.1.1.2.9.1.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current .
| |||||||||||||
| CtnSnmpTargetAddrDisableTrap | 1.3.6.1.4.1.7483.2.1.1.2.9.1.1.3 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Indicates the destination based trap disable mechanism feature is on. | |||||||||||||
| NtnSyslog | 1.3.6.1.4.1.7483.2.1.1.2.10 | ||||||||||||
| StnSyslogIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.10.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSyslogPort | 1.3.6.1.4.1.7483.2.1.1.2.10.2 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current . | |||||||||||||
| StnSyslogFacility | 1.3.6.1.4.1.7483.2.1.1.2.10.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSyslogPriority | 1.3.6.1.4.1.7483.2.1.1.2.10.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSyslogEnabled | 1.3.6.1.4.1.7483.2.1.1.2.10.5 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSyslogInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.10.6 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the Syslog Server. | |||||||||||||
| StnSyslogInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.10.7 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSyslogInetAddress. | |||||||||||||
| StnSyslogProtocol | 1.3.6.1.4.1.7483.2.1.1.2.10.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Syslog Transmission Protocol.
| |||||||||||||
| NtnSysTiming | 1.3.6.1.4.1.7483.2.1.1.2.11 | ||||||||||||
| StnSysTimingPrimaryReference | 1.3.6.1.4.1.7483.2.1.1.2.11.1 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysTimingSecondaryReference | 1.3.6.1.4.1.7483.2.1.1.2.11.2 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysTimingLastSwitchTime | 1.3.6.1.4.1.7483.2.1.1.2.11.3 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current . | |||||||||||||
| StnSysTimingControl | 1.3.6.1.4.1.7483.2.1.1.2.11.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysTimingPrimaryReferenceStatus | 1.3.6.1.4.1.7483.2.1.1.2.11.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysTimingSecondaryReferenceStatus | 1.3.6.1.4.1.7483.2.1.1.2.11.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysTimingPrimaryReferenceQuality | 1.3.6.1.4.1.7483.2.1.1.2.11.7 | TropicSysTimingReferenceQuality | RO | ||||||||||
scalar · TropicSysTimingReferenceQuality · read-only · current . | |||||||||||||
| StnSysTimingSecondaryReferenceQuality | 1.3.6.1.4.1.7483.2.1.1.2.11.8 | TropicSysTimingReferenceQuality | RO | ||||||||||
scalar · TropicSysTimingReferenceQuality · read-only · current . | |||||||||||||
| StnSysTimingPrimaryReferenceTimingMode | 1.3.6.1.4.1.7483.2.1.1.2.11.9 | TropicSysTimingReferenceTimingMode | RO | ||||||||||
scalar · TropicSysTimingReferenceTimingMode · read-only · current . | |||||||||||||
| StnSysTimingSecondaryReferenceTimingMode | 1.3.6.1.4.1.7483.2.1.1.2.11.10 | TropicSysTimingReferenceTimingMode | RO | ||||||||||
scalar · TropicSysTimingReferenceTimingMode · read-only · current . | |||||||||||||
| StnSysTimingActiveReference | 1.3.6.1.4.1.7483.2.1.1.2.11.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysTimingClockingMode | 1.3.6.1.4.1.7483.2.1.1.2.11.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysTimingSwitchingMode | 1.3.6.1.4.1.7483.2.1.1.2.11.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysTimingFreeRunSuppressAlarms | 1.3.6.1.4.1.7483.2.1.1.2.11.14 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysTimingDs1FramingMode | 1.3.6.1.4.1.7483.2.1.1.2.11.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysTimingDs1LineCoding | 1.3.6.1.4.1.7483.2.1.1.2.11.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysTimingDs1SsmProcessing | 1.3.6.1.4.1.7483.2.1.1.2.11.17 | AluWdmEnabledDisabled | RW | ||||||||||
scalar · AluWdmEnabledDisabled · read-write · current . | |||||||||||||
| StnSysTimingBitsAClockQuality | 1.3.6.1.4.1.7483.2.1.1.2.11.18 | TropicSysTimingReferenceQuality | RW | ||||||||||
scalar · TropicSysTimingReferenceQuality · read-write · current . | |||||||||||||
| StnSysTimingBitsBClockQuality | 1.3.6.1.4.1.7483.2.1.1.2.11.19 | TropicSysTimingReferenceQuality | RW | ||||||||||
scalar · TropicSysTimingReferenceQuality · read-write · current . | |||||||||||||
| StnSysTimingActiveLineTimingCable | 1.3.6.1.4.1.7483.2.1.1.2.11.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysTimingBitSourceType | 1.3.6.1.4.1.7483.2.1.1.2.11.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysTimingBitsAModuleType | 1.3.6.1.4.1.7483.2.1.1.2.11.22 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| StnSysTimingBitsBModuleType | 1.3.6.1.4.1.7483.2.1.1.2.11.23 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| NtnSysFeatures | 1.3.6.1.4.1.7483.2.1.1.2.12 | ||||||||||||
| StnSysFeatureAutoTopology | 1.3.6.1.4.1.7483.2.1.1.2.12.3 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysFeaturePauseFlowControl | 1.3.6.1.4.1.7483.2.1.1.2.12.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysFeatureIpUtilitiesRestricted | 1.3.6.1.4.1.7483.2.1.1.2.12.5 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysFeatureFastServiceSetup | 1.3.6.1.4.1.7483.2.1.1.2.12.6 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enables or disables fast service setup feature. | |||||||||||||
| NtnSysFaultCorrelation | 1.3.6.1.4.1.7483.2.1.1.2.13 | ||||||||||||
| StnSysFaultCorrelationTransientSuppression | 1.3.6.1.4.1.7483.2.1.1.2.13.1 | AluWdmEnabledDisabled | RW | ||||||||||
scalar · AluWdmEnabledDisabled · read-write · current This attribute always returns a value of disabled. Sets are not supported. | |||||||||||||
| NtnSysErrorHandling | 1.3.6.1.4.1.7483.2.1.1.2.14 | ||||||||||||
| StnSysSetRequestErrorMessage | 1.3.6.1.4.1.7483.2.1.1.2.14.1 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current If this attribute is set to any value and it is the first attribute in a multi-set request varbind list and one of the other attributes in the multi-set request varbind list failed to set, the response PDU will contain an error message. The error message will be the value of attribute tnSysSetRequestErrorMessage in the response PDU. If there are no set failures, the value of tnSysSetRequestErrorMessage in the response PDU will be unchanged. When read, this attribute will return an empty string. | |||||||||||||
| NtnSysSecurity | 1.3.6.1.4.1.7483.2.1.1.2.15 | ||||||||||||
| StnSysSecurityMode | 1.3.6.1.4.1.7483.2.1.1.2.15.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Security mode for 1830.
| |||||||||||||
| NtnSysSsh | 1.3.6.1.4.1.7483.2.1.1.2.15.2 | ||||||||||||
| StnSysSshKeyType | 1.3.6.1.4.1.7483.2.1.1.2.15.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The secure shell key type. Only RSA key generation is supported in the current release. Current configurable value: rsa.
| |||||||||||||
| StnSysSshKeyModulus | 1.3.6.1.4.1.7483.2.1.1.2.15.2.2 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The secure shell modulus. This is used for RSA key generation. Current supported range: 2048 to 4096. | |||||||||||||
| StnSysSshPublicKey | 1.3.6.1.4.1.7483.2.1.1.2.15.2.3 | OCTET STRING (SIZE (0..500)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..500)) · read-only · current The secure shell public key. | |||||||||||||
| StnSysSshKeyCommand | 1.3.6.1.4.1.7483.2.1.1.2.15.2.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Secure key command. Note that the value retrieved from this attribute is always noCmd.
| |||||||||||||
| StnSysSshKeyGenerationStatus | 1.3.6.1.4.1.7483.2.1.1.2.15.2.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status of the secure key generation.
| |||||||||||||
| StnSysSshEcdsaKeyModulus | 1.3.6.1.4.1.7483.2.1.1.2.15.2.6 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| NtnSysSsl | 1.3.6.1.4.1.7483.2.1.1.2.15.3 | ||||||||||||
| StnSysSslKeyType | 1.3.6.1.4.1.7483.2.1.1.2.15.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The SSL key type. Only RSA key generation is supported in the current release. Current configurable value: rsa.
| |||||||||||||
| StnSysSslKeyModulus | 1.3.6.1.4.1.7483.2.1.1.2.15.3.2 | Unsigned32 (512..4096) | RW | ||||||||||
scalar · Unsigned32 (512..4096) · read-write · current The SSL key modulus. Pre-R3.6 range: (512, 4096) R3.6 range: (512, 2048) Post-R11.0 range:(512, 4096) R11.1 range: (2048, 4096). | |||||||||||||
| StnSysSslPublicKey | 1.3.6.1.4.1.7483.2.1.1.2.15.3.3 | OCTET STRING (SIZE (0..2000)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..2000)) · read-only · current The SSL public key. | |||||||||||||
| StnSysSslKeyCommand | 1.3.6.1.4.1.7483.2.1.1.2.15.3.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current SSL key command. Note that the value retrieved from this attribute is always noCmd.
| |||||||||||||
| StnSysSslKeyGenerationStatus | 1.3.6.1.4.1.7483.2.1.1.2.15.3.5 | AluWdmSslOperationStatus | RO | ||||||||||
scalar · AluWdmSslOperationStatus · read-only · current Status of the SSL key generation. | |||||||||||||
| StnSysSslCertTransferCommand | 1.3.6.1.4.1.7483.2.1.1.2.15.3.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to upload SSL CSR or download certificate.
| |||||||||||||
| StnSysSslCertTransferProtocol | 1.3.6.1.4.1.7483.2.1.1.2.15.3.8 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current The protocol used for SSL CSR and certificate file transfers. | |||||||||||||
| StnSysSslCertTransferRemoteIp | 1.3.6.1.4.1.7483.2.1.1.2.15.3.9 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The server IP address for SSL CSR and certificate file transfers. | |||||||||||||
| StnSysSslCertTransferRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.15.3.10 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The path on server for SSL CSR and certificate file transfers. | |||||||||||||
| StnSysSslCertTransferRemoteUserId | 1.3.6.1.4.1.7483.2.1.1.2.15.3.11 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The userId used for SSL CSR and certificate file transfers. | |||||||||||||
| StnSysSslCertTransferRemotePassword | 1.3.6.1.4.1.7483.2.1.1.2.15.3.12 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The password used for SSL CSR and certificate file transfers. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysSslCsrCommand | 1.3.6.1.4.1.7483.2.1.1.2.15.3.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to generate SSL certificate signing request (CSR).
| |||||||||||||
| StnSysSslCsrCountry | 1.3.6.1.4.1.7483.2.1.1.2.15.3.14 | SnmpAdminString (SIZE (2)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (2)) · read-write · current The SSL CSR subject country. | |||||||||||||
| StnSysSslCsrState | 1.3.6.1.4.1.7483.2.1.1.2.15.3.15 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The SSL CSR subject state. | |||||||||||||
| StnSysSslCsrLocality | 1.3.6.1.4.1.7483.2.1.1.2.15.3.16 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The SSL CSR subject locality. | |||||||||||||
| StnSysSslCsrOrganization | 1.3.6.1.4.1.7483.2.1.1.2.15.3.17 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..64)) · read-write · current The SSL CSR subject organization. | |||||||||||||
| StnSysSslCsrOrganizationUnit | 1.3.6.1.4.1.7483.2.1.1.2.15.3.18 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..64)) · read-write · current The SSL CSR subject organization unit. | |||||||||||||
| StnSysSslCsrCommonName | 1.3.6.1.4.1.7483.2.1.1.2.15.3.19 | SnmpAdminString (SIZE (0..64)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..64)) · read-write · current The SSL CSR subject common name. | |||||||||||||
| StnSysSslCsrEmailAddress | 1.3.6.1.4.1.7483.2.1.1.2.15.3.20 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The SSL CSR subject email address. | |||||||||||||
| StnSysSslCertCommand | 1.3.6.1.4.1.7483.2.1.1.2.15.3.21 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to install SSL certificate.
| |||||||||||||
| StnSysSslCertSignatureAlgorithm | 1.3.6.1.4.1.7483.2.1.1.2.15.3.22 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current The SSL certificate signature algorithm. | |||||||||||||
| StnSysSslCertValidity | 1.3.6.1.4.1.7483.2.1.1.2.15.3.23 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current The SSL certificate validity. | |||||||||||||
| StnSysSslCsrUploadStatus | 1.3.6.1.4.1.7483.2.1.1.2.15.3.24 | AluWdmSslOperationStatus | RO | ||||||||||
scalar · AluWdmSslOperationStatus · read-only · current Status of the SSL CSR file transfer. | |||||||||||||
| StnSysSslCertDownloadStatus | 1.3.6.1.4.1.7483.2.1.1.2.15.3.25 | AluWdmSslOperationStatus | RO | ||||||||||
scalar · AluWdmSslOperationStatus · read-only · current Status of the SSL certificate file transfer. | |||||||||||||
| StnSysSslCertInstallStatus | 1.3.6.1.4.1.7483.2.1.1.2.15.3.26 | AluWdmSslOperationStatus | RO | ||||||||||
scalar · AluWdmSslOperationStatus · read-only · current Status of the SSL certificate install. | |||||||||||||
| StnSysSslCsrGenerationStatus | 1.3.6.1.4.1.7483.2.1.1.2.15.3.27 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status of the SSL CSR Generation.
| |||||||||||||
| StnSysSslCertTransferInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.15.3.28 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in SSL CSR | |||||||||||||
| StnSysSslCertTransferInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.15.3.29 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of SSL CSR and certificate file transfers. | |||||||||||||
| StnSysSslCertTransferPort | 1.3.6.1.4.1.7483.2.1.1.2.15.3.30 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current . | |||||||||||||
| StnSysSslCertVerification | 1.3.6.1.4.1.7483.2.1.1.2.15.3.31 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Specifies that the X.509v3 certificate will be verified before installation. This means verification of validaity, chain of trust (issuer of certificate), basicConstraints, (extended) key purpose, revocation status. | |||||||||||||
| StnSysSslCertExpiration | 1.3.6.1.4.1.7483.2.1.1.2.15.3.32 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| NtnSysKey | 1.3.6.1.4.1.7483.2.1.1.2.15.4 | ||||||||||||
| StnSshKeyAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.15.4.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Total no of attributes in tnSshKeyTable. | |||||||||||||
| TtnSshKeyTable | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshKeyEntry | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1 | NA | |||||||||||
| CtnSshKeyTypeIndex | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The secure shell key type.
| |||||||||||||
| CtnSshPublicKey | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.2 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current The secure shell public key. | |||||||||||||
| CtnSshPublicKey1 | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.3 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current The secure shell public key1. | |||||||||||||
| CtnSshEcdsaPublicKey | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.4 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current The secure Ecdsa public key. | |||||||||||||
| CtnSshEcdsaPublicKey1 | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.5 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current The secure Ecdsa public key1. | |||||||||||||
| CtnSshEd25519PublicKey | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.6 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current The secure Ed25519 public key. | |||||||||||||
| CtnSshEd25519PublicKey1 | 1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.7 | OCTET STRING (SIZE (0..2048)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..2048)) · read-only · current The secure Ed25519 public key1. | |||||||||||||
| NtnSysTransferLog | 1.3.6.1.4.1.7483.2.1.1.2.16 | ||||||||||||
| StnSysTransferLogCommand | 1.3.6.1.4.1.7483.2.1.1.2.16.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| StnSysTransferLogRemoteHostIp | 1.3.6.1.4.1.7483.2.1.1.2.16.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysTransferLogRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.16.3 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current . | |||||||||||||
| StnSysTransferLogType | 1.3.6.1.4.1.7483.2.1.1.2.16.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This attribute indicates the log type to be transferred to remote file server.
| |||||||||||||
| StnSysTransferLogStatus | 1.3.6.1.4.1.7483.2.1.1.2.16.5 | AluWdmTransferStatus | RO | ||||||||||
scalar · AluWdmTransferStatus · read-only · current This attribute indicates the status of the previously executed tnSysTransferLogCommand operation. | |||||||||||||
| StnSysTransferLogLastLogFilename | 1.3.6.1.4.1.7483.2.1.1.2.16.6 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-only · current This attribute indicates the filename for the last transfer performed on the node. If none exists or a transfer is in progress, this attribute will return an empty string. | |||||||||||||
| StnSysTransferLogLastCommand | 1.3.6.1.4.1.7483.2.1.1.2.16.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This is the last transfer log command executed. If the last operation is unknown, the value of this attribute will be unknown. If a transfer log command has not been executed since the last node reset, the value of this attribute will be noCommand.
| |||||||||||||
| StnSysTransferLogLastFileTimeStamp | 1.3.6.1.4.1.7483.2.1.1.2.16.8 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The date and time when the last file was completed. | |||||||||||||
| StnSysTransferLogProtocol | 1.3.6.1.4.1.7483.2.1.1.2.16.9 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current This attributes indicates the transfer log protocol. | |||||||||||||
| StnSysTransferLogUserId | 1.3.6.1.4.1.7483.2.1.1.2.16.10 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The userId used to access the RFS. | |||||||||||||
| StnSysTransferLogPassword | 1.3.6.1.4.1.7483.2.1.1.2.16.11 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The password used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysTransferLogWindowStart | 1.3.6.1.4.1.7483.2.1.1.2.16.12 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The start time of partial log time window, measured in total time ticks (seconds) from the year 1970. | |||||||||||||
| StnSysTransferLogWindowStop | 1.3.6.1.4.1.7483.2.1.1.2.16.13 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The stop time of partial log time window, measured in total time ticks (seconds) from the year 1970. | |||||||||||||
| StnSysTransferLogRemoteHostInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.16.14 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysTransferLogRemoteHostInetAddress. | |||||||||||||
| StnSysTransferLogRemoteHostInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.16.15 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the log server. | |||||||||||||
| StnSysTransferLogPort | 1.3.6.1.4.1.7483.2.1.1.2.16.16 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current This attributes indicates the transfer log port. | |||||||||||||
| NtnSysAccessControlList | 1.3.6.1.4.1.7483.2.1.1.2.17 | ||||||||||||
| NtnSysIpAclSysDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.1 | ||||||||||||
| StnSysIpAclRxAction | 1.3.6.1.4.1.7483.2.1.1.2.17.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Default action to be taken on received (incoming) packets where ACL is enabled but no pattern matches or no action is explicitly defined.
| |||||||||||||
| StnSysIpAclTxAction | 1.3.6.1.4.1.7483.2.1.1.2.17.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Default action to be taken on transmitted (outgoing) packets where ACL is enabled but no pattern matches or no action is explicitly defined.
| |||||||||||||
| StnSysIpAclSnmpCfgEnable | 1.3.6.1.4.1.7483.2.1.1.2.17.1.3 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Indicates whether or not ACL configuration is supported via SNMP. | |||||||||||||
| StnSysIpAclCfgRestoreToDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.1.4 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current If setting to true, it will restore acl_ipv4 config to system default. | |||||||||||||
| StnSysIpAclClearCounter | 1.3.6.1.4.1.7483.2.1.1.2.17.1.5 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Clear IPACL counter to zero. | |||||||||||||
| StnSysIpAclPatternAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclPatternTable | 1.3.6.1.4.1.7483.2.1.1.2.17.3 | NA | |||||||||||
table · not-accessible · current Table of IP ACL pattern. An ACL pattern is a set of packet field descriptors that can be tested against a packet. For a pattern to match, each of its field descriptors must fit the data in the packet. | |||||||||||||
| RtnSysIpAclPatternEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1 | NA | |||||||||||
| CtnSysIpAclPatternID | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.1 | SnmpAdminString (SIZE (1..30)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..30)) · not-accessible · current The identifier of the ACL pattern to be created. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests. | |||||||||||||
| CtnSysIpAclPatternAction | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Action to be taken on packets matching the
specified ACL pattern. Valid values are:
pass - allow the packet if it matches all the
pattern descriptors;
block - disallow the packet if it doesn't match
all the pattern descriptors.
log - log the packet if it matches all the
pattern descriptors.
| |||||||||||||
| CtnSysIpAclPatternICMPERROR | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current ICMP error reporting behavior for blocked
packets. If no icmpError value is specified,
the behavior will be determined by the system
default setting. Valid values are:
true - send ICMP error for blocked packets
false - do not send ICMP error for blocked
packets. | |||||||||||||
| CtnSysIpAclPatternSrcAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.4 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Source IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefix parameter to specify a range of supported originating IP addresses. | |||||||||||||
| CtnSysIpAclPatternSrcPrefix | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.5 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Source IP mask prefix. It's the reverse of a subnet mask, where 0 indicates a position that must be matched and 1 indicates a position that does not matter. If the SrcAddr is specified and the SrcPrefix is unspecified (0.0.0.0), the originating IP address of the packet must match the SrcAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the SrcAddr is also specified. | |||||||||||||
| CtnSysIpAclPatternDestAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.6 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Destination IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefix parameter to specify a range of supported destination IP addresses. | |||||||||||||
| CtnSysIpAclPatternDestPrefix | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.7 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Destination IP Mask Prefix. It's the reverse of a subnet mask, where 0 indicates a position that must be matched and 1 indicates a position that does not matter. If the DestAddr is specified and the DestPrefix is unspecified (0.0.0.0), the originating IP address of the packet must match the DestAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the DestAddr is also specified. | |||||||||||||
| CtnSysIpAclPatternDestPort | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.8 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP destination port.When rangeEnd not zero, it is used as range start. It is applicable only when the IP Protocol is TCP or UDP. Some of the commonly used ports are: 20 FTP-Data TCP File Transfer Protocol [Data] 21 FTP TCP File Transfer Protocol [Control] 23 Telnet TCP Telnet 69 TFTP UDP Trivial File Transfer Protocol 123 NTP UDP Network Time Protocol 161 SNMP UDP SNMP 162 SNMPTRAP UDP SNMPTRAP 3082 TL1-Raw TCP TL-1 [Raw] 3083 TL1-Telnet TCP TL-1 [User Interface] | |||||||||||||
| CtnSysIpAclPatternIpProtocol | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.9 | OCTET STRING | RC | ||||||||||
column · OCTET STRING · read-create · current IP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMP - IP protocol is ICMP (1) IPIP - IP protocol is IPIP (4) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPF - IP protocol is OSPF (89) <other protocol> - Specify IP protocol number: 0 to 255 | |||||||||||||
| CtnSysIpAclPatternIpFragment | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.10 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current IP Fragmentation. True means that the filtering is done on all fragments, not just on the initial one (assuming the following ones are ok). Valid values are: true - pattern is an IP false - pattern is not an IP fragment. | |||||||||||||
| CtnSysIpAclPatternIcmpType | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.11 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMP Type identifier. It is applicable only when IPPROTOCOL is ICMP. If specified, the pattern will match only packets with this exact ICMP type. Some of the most commonly used ICMP types are: 0 Echo Reply [RFC792] 3 Destination Unreachable[RFC792] 5 Redirect[RFC792] 9 Router Advertisement[RFC1256] 42-255 Reserved. | |||||||||||||
| CtnSysIpAclPatternIcmpCode | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.12 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMP code field. It is applicable only when IP protocol is ICMP and is used along with certain ICMP types to further specify the message type. It must also specify the ICMP type when setting this parameter. If specified, the pattern will only match packets with this exact ICMP code value. For example, there are a few ICMPCODEs associated with the ICMPTYPE Redirect [RFC792]: 0 Redirect Datagram for the Network (or subnet) 1 Redirect Datagram for the Host 2 Redirect Datagram for the Type of Service and Network 3 Redirect Datagram for the Type of Service and Host. | |||||||||||||
| CtnSysIpAclPatternTcpEstablish | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.13 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current TCP established flag. It matches a packet depending on
whether the TCP flags in the IP header correspond to the
established state. It is applicable only when IP Protocol
is TCP. Valid values are:
true - TCP flags correspond to established state
false - TCP flags do not correspond to established state
local - TCP flags correspond to established state only for
destination to local NE.
| |||||||||||||
| CtnSysIpAclPatternRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.14 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of pattern. Set to 4 (createAndGo) to add pattern. Set to 6 (destroy) to remove the pattern. | |||||||||||||
| CtnSysIpAclPatternSrcPort | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.15 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP source port. When rangeEnd not zero, it is used as range start. It is applicable only when the IP Protocol is TCP or UDP. Some of the commonly used ports are: 20 FTP-Data TCP File Transfer Protocol [Data] 21 FTP TCP File Transfer Protocol [Control] 23 Telnet TCP Telnet 69 TFTP UDP Trivial File Transfer Protocol 123 NTP UDP Network Time Protocol 161 SNMP UDP SNMP 162 SNMPTRAP UDP SNMPTRAP 3082 TL1-Raw TCP TL-1 [Raw] 3083 TL1-Telnet TCP TL-1 [User Interface] | |||||||||||||
| CtnSysIpAclPatternSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.16 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL pattern is added by the system or a user. Valid values are: true - ACL pattern is added by the system. false - ACL pattern is added by the user. | |||||||||||||
| CtnSysIpAclPatternSrcPortRangeEnd | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.17 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP source port range end. | |||||||||||||
| CtnSysIpAclPatternDestPortRangeEnd | 1.3.6.1.4.1.7483.2.1.1.2.17.3.1.18 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP destination port range end. | |||||||||||||
| StnSysIpAclFilterAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.4 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclFilterTable | 1.3.6.1.4.1.7483.2.1.1.2.17.5 | NA | |||||||||||
table · not-accessible · current An ACL filter is an ordered list of patterns. A filter consists of a sorted list of (index, pattern) pairs, where the index indicates the relative position on the list and the pattern indicates the pattern identifier. Up to 100 filters may be defined on the system, and each filter may contain up to 256 (index, pattern) pairs. | |||||||||||||
| RtnSysIpAclFilterEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.5.1 | NA | |||||||||||
| CtnSysIpAclFilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.5.1.1 | SnmpAdminString (SIZE (1..30)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..30)) · not-accessible · current Identifier for the ACL filter being defined. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which uniquely identifies the filter being defined. | |||||||||||||
| CtnSysIpAclFilterPatternIndex | 1.3.6.1.4.1.7483.2.1.1.2.17.5.1.2 | Integer32 (0..256) | NA | ||||||||||
column · Integer32 (0..256) · not-accessible · current The values of 1 to 256 represent the insertion point for the specified pattern on the filter list. If there is already a pattern defined at the specified index, the new pattern entry will replace the previous one. The value of 0 represents user input filterID without giving the pattern index. Front end users will use 0 for setting. | |||||||||||||
| CtnSysIpAclFilterPatternID | 1.3.6.1.4.1.7483.2.1.1.2.17.5.1.3 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current The identifier of the ACL pattern being added to or removed from the specified filter. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests. | |||||||||||||
| CtnSysIpAclFilterStatCount | 1.3.6.1.4.1.7483.2.1.1.2.17.5.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Packet match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern. | |||||||||||||
| CtnSysIpAclFilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.5.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Action to take on the specified filter. The operator could add or remove a pattern from a specified filter. Set to 4 (createAndGo) to add pattern in the filter. Set to 6 (destroy) to remove the pattern in the filter. | |||||||||||||
| CtnSysIpAclFilterSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.5.1.6 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL filter is added by the system or a user. Valid values are: true - ACL filter is added by the system. false - ACL filter is added by a user. | |||||||||||||
| StnSysIpAclInterfaceAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclInterfaceTable | 1.3.6.1.4.1.7483.2.1.1.2.17.7 | NA | |||||||||||
table · not-accessible · current The IP ACL interface table is used to associate or disassociate filters with particular physical network interfaces (but not logical sub-interfaces). Two filters may be associated with each interface, one receive and one transmit. The receive and transmit filters on an interface may be independently enabled and disabled on that interface without disassociating the specific filter numbers. | |||||||||||||
| RtnSysIpAclInterfaceEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.7.1 | NA | |||||||||||
| CtnSysIpAclInterfaceFilterDir | 1.3.6.1.4.1.7483.2.1.1.2.17.7.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Direction on the specified network interface to which the IP ACL filter will be associated.
| |||||||||||||
| CtnSysIpAclInterfaceFilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.7.1.2 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current Identifier for the ACL filter being associated with the specified interface and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter. | |||||||||||||
| CtnSysIpAclInterfaceFilterEnable | 1.3.6.1.4.1.7483.2.1.1.2.17.7.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IP ACL filter associated with the specified interface and direction.
| |||||||||||||
| CtnSysIpAclInterfaceFilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.7.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of Interface Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface. | |||||||||||||
| CtnSysIpAclInterfaceSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.7.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL interface added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user. | |||||||||||||
| CtnSysIpAclInterfaceFilterLog | 1.3.6.1.4.1.7483.2.1.1.2.17.7.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IP ACL filter logging on specified interface and direction.
| |||||||||||||
| StnSysIpAclNetIfFilterAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.8 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclNetIfFilterTable | 1.3.6.1.4.1.7483.2.1.1.2.17.9 | NA | |||||||||||
table · not-accessible · current The IP ACL NetIf table is used to associate or disassociate filters with particular NetIf. Two filters may be associated with each NetIf, one receive and one transmit. The receive and transmit filters on an NetIf may be independently enabled and disabled on that NetIf without disassociating the specific filter numbers. | |||||||||||||
| RtnSysIpAclNetIfFilterEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.9.1 | NA | |||||||||||
| CtnSysIpAclNetIfFilterDir | 1.3.6.1.4.1.7483.2.1.1.2.17.9.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Direction on the specified NetIf to which the IP ACL filter will be associated.
| |||||||||||||
| CtnSysIpAclNetIfFilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.9.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of NetIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface. | |||||||||||||
| CtnSysIpAclNetIfFilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.9.1.3 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current Identifier for the ACL filter being associated with the specified NetIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter. | |||||||||||||
| CtnSysIpAclNetIfFilterEnable | 1.3.6.1.4.1.7483.2.1.1.2.17.9.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IP ACL filter associated with the specified NetIf and direction.
| |||||||||||||
| CtnSysIpAclNetIfFilterSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.9.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL NetIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user. | |||||||||||||
| StnSysIpAclIpv6PatternAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.10 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclIpv6PatternTable | 1.3.6.1.4.1.7483.2.1.1.2.17.11 | NA | |||||||||||
table · not-accessible · current Table of IPV6 ACL pattern. An ACL pattern is a set of packet field descriptors that can be tested against a packet. For a pattern to match, each of its field descriptors must fit the data in the packet. | |||||||||||||
| RtnSysIpAclIpv6PatternEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1 | NA | |||||||||||
| CtnSysIpAclIpv6PatternID | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.1 | SnmpAdminString (SIZE (1..30)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..30)) · not-accessible · current The identifier of theIpv6 ACL pattern to be created. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests. | |||||||||||||
| CtnSysIpAclIpv6PatternAction | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Action to be taken on packets matching the specified Ipv6ACL pattern. Valid values are: pass - allow the packet if it matches all the pattern descriptors; block - disallow the packet if it doesn't match all the pattern descriptors. log - log the packet if it matches all the pattern descriptors.
| |||||||||||||
| CtnSysIpAclIpv6PatternICMPV6ERROR | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current ICMPV6 error reporting behavior for blocked packets. If no icmpV6Error value is specified, the behavior will be determined by the system default setting. Valid values are: true - send ICMPV6 error for blocked packets false - do not send ICMPV6 error for blocked packets. | |||||||||||||
| CtnSysIpAclIpv6PatternSrcAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.4 | InetAddressIPv6 | RC | ||||||||||
column · InetAddressIPv6 · read-create · current Source IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefixLen parameter to specify a range of supported originating IPV6 addresses. | |||||||||||||
| CtnSysIpAclIpv6PatternSrcPrefixLen | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.5 | InetAddressPrefixLength | RC | ||||||||||
column · InetAddressPrefixLength · read-create · current Denotes the length of source IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0 | |||||||||||||
| CtnSysIpAclIpv6PatternDestAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.6 | InetAddressIPv6 | RC | ||||||||||
column · InetAddressIPv6 · read-create · current Destination IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefixLen parameter to specify a range of supported destination IPV6 addresses. | |||||||||||||
| CtnSysIpAclIpv6PatternDestPrefixLen | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.7 | InetAddressPrefixLength | RC | ||||||||||
column · InetAddressPrefixLength · read-create · current Denotes the length of destination IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0 | |||||||||||||
| CtnSysIpAclIpv6PatternIpProtocol | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.8 | OCTET STRING | RC | ||||||||||
column · OCTET STRING · read-create · current IP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMPv6 - IP protocol is ICMPv6 (58) IPIP - IP protocol is IPIP (41) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPFv3 - IP protocol is OSPFv3 (89) <other protocol> - Specify IP protocol number: 0 to 255 | |||||||||||||
| CtnSysIpAclIpv6PatternIcmpType | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.9 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMPV6 Type identifier. If specified, the pattern will match only packets with this exact ICMPV6 type. Some of the most commonly used ICMP types are: 1 Destination Unreachable [RFC2463] 2 Packet Too Big 3 Time Exceeded 4 Parameter Problem 128 Echo Request(IPv6 pingcommand) 129 Echo Reply 133-137 Neighbor Discovery. | |||||||||||||
| CtnSysIpAclIpv6PatternIcmpCode | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.10 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMPV6code field. It is used along with certain ICMPV6 types to further specify the message type. For example, some of the codes used with ICMPv6 Type 1 (Destination Unreachable) are 0 no route to destination 1 communication with destination administratively prohibited 2 beyond scope of source address 3 address unreachable 4 port unreachable 5 source address failed ingress/egress policy 6 reject route to destination 7 Error in Source Routing Header If specified, the pattern will only match packets with this exact ICMPV6 codevalue. [RFC2463] | |||||||||||||
| CtnSysIpAclIpv6PatternSrcPort | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.11 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP source port. When rangeEnd not zero, it is used as range start. | |||||||||||||
| CtnSysIpAclIpv6PatternDestPort | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.12 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP destination port. When rangeEnd not zero, it is used as range start. | |||||||||||||
| CtnSysIpAclIpv6PatternIpFragment | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.13 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current IP Fragmentation. True means that the filtering is done on all fragments, not just on the initial one (assuming the following ones are ok). Valid values are: true - pattern is an IP false - pattern is not an IP fragment. | |||||||||||||
| CtnSysIpAclIpv6PatternTcpEstablish | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.14 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current TCP established flag. It matches a packet depending on
whether the TCP flags in the IP header correspond to the
established state. Valid values are:
true - TCP flags correspond to established state
false - TCP flags do not correspond to established
local - TCP flags correspond to established state
only for destination to local NE.
| |||||||||||||
| CtnSysIpAclIpv6PatternSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.15 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACLIPV6 pattern is added by the system or a user. Valid values are: true - ACL pattern is added by the system. false - ACL pattern is added by the user. | |||||||||||||
| CtnSysIpAclIpv6PatternRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.16 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of pattern. Set to 4 (createAndGo) to add pattern. Set to 6 (destroy) to remove the pattern. | |||||||||||||
| CtnSysIpAclIpv6PatternSrcPortRangeEnd | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.17 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP source port range end. | |||||||||||||
| CtnSysIpAclIpv6PatternDestPortRangeEnd | 1.3.6.1.4.1.7483.2.1.1.2.17.11.1.18 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current TCP/UDP destination port range end. | |||||||||||||
| StnSysIpAclIpv6FilterAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.12 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclIpv6FilterTable | 1.3.6.1.4.1.7483.2.1.1.2.17.13 | NA | |||||||||||
table · not-accessible · current An ACL filter is an ordered list of patterns. A filter consists of a sorted list of (index, pattern) pairs, where the index indicates the relative position on the list and the pattern indicates the pattern identifier. Up to 100 filters may be defined on the system, and each filter may contain up to 256 (index, pattern) pairs. | |||||||||||||
| RtnSysIpAclIpv6FilterEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.13.1 | NA | |||||||||||
| CtnSysIpAclIpv6FilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.13.1.1 | SnmpAdminString (SIZE (1..30)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..30)) · not-accessible · current Identifier for the ACL filter being defined. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which uniquely identifies the filter being defined. | |||||||||||||
| CtnSysIpAclIpv6FilterPatternIndex | 1.3.6.1.4.1.7483.2.1.1.2.17.13.1.2 | Integer32 (0..256) | NA | ||||||||||
column · Integer32 (0..256) · not-accessible · current The values of 1 to 256 represent the insertion point for the specified pattern on the filter list. If there is already a pattern defined at the specified index, the new pattern entry will replace the previous one. The value of 0 represents user input filterID without giving the pattern index. Front end users will use 0 for setting. | |||||||||||||
| CtnSysIpAclIpv6FilterPatternID | 1.3.6.1.4.1.7483.2.1.1.2.17.13.1.3 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current The identifier of the ACL pattern being added to or removed from the specified filter. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests. | |||||||||||||
| CtnSysIpAclIpv6FilterStatCount | 1.3.6.1.4.1.7483.2.1.1.2.17.13.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Packet match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern. | |||||||||||||
| CtnSysIpAclIpv6FilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.13.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Action to take on the specified filter. The operator could add or remove a pattern from a specified filter. Set to 4 (createAndGo) to add pattern in the filter. Set to 6 (destroy) to remove the pattern in the filter. | |||||||||||||
| CtnSysIpAclIpv6FilterSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.13.1.6 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL filter is added by the system or a user. Valid values are: true - ACL filter is added by the system. false - ACL filter is added by a user. | |||||||||||||
| StnSysIpAclIpv6InterfaceAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.14 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclIpv6InterfaceTable | 1.3.6.1.4.1.7483.2.1.1.2.17.15 | NA | |||||||||||
table · not-accessible · current The IP ACL interface table is used to associate or disassociate filters with particular physical network interfaces (but not logical sub-interfaces). Two filters may be associated with each interface, one receive and one transmit. The receive and transmit filters on an interface may be independently enabled and disabled on that interface without disassociating the specific filter numbers. | |||||||||||||
| RtnSysIpAclIpv6InterfaceEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.15.1 | NA | |||||||||||
| CtnSysIpAclIpv6InterfaceFilterDir | 1.3.6.1.4.1.7483.2.1.1.2.17.15.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Direction on the specified network interface to which the IP ACL filter will be associated.
| |||||||||||||
| CtnSysIpAclIpv6InterfaceFilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.15.1.2 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current Identifier for the ACL filter being associated with the specified interface and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter. | |||||||||||||
| CtnSysIpAclIpv6InterfaceFilterEnable | 1.3.6.1.4.1.7483.2.1.1.2.17.15.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IP ACL filter associated with the specified interface and direction.
| |||||||||||||
| CtnSysIpAclIpv6InterfaceFilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.15.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of Interface Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface. | |||||||||||||
| CtnSysIpAclIpv6InterfaceSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.15.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL interface added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user. | |||||||||||||
| CtnSysIpAclIpv6InterfaceFilterLog | 1.3.6.1.4.1.7483.2.1.1.2.17.15.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IPV6 ACL filter logging on specified interface and direction.
| |||||||||||||
| StnSysIpv6AclNetIfFilterAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.16 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpv6AclNetIfFilterTable | 1.3.6.1.4.1.7483.2.1.1.2.17.17 | NA | |||||||||||
table · not-accessible · current The IP ACL NetIf table is used to associate or disassociate filters with particular NetIf. Two filters may be associated with each NetIf, one receive and one transmit. The receive and transmit filters on an NetIf may be independently enabled and disabled on that NetIf without disassociating the specific filter numbers. | |||||||||||||
| RtnSysIpv6AclNetIfFilterEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.17.1 | NA | |||||||||||
| CtnSysIpv6AclNetIfFilterDir | 1.3.6.1.4.1.7483.2.1.1.2.17.17.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Direction on the specified NetIf to which the IP ACL filter will be associated.
| |||||||||||||
| CtnSysIpv6AclNetIfFilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.17.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of NetIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface. | |||||||||||||
| CtnSysIpv6AclNetIfFilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.17.1.3 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current Identifier for the ACL filter being associated with the specified NetIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter. | |||||||||||||
| CtnSysIpv6AclNetIfFilterEnable | 1.3.6.1.4.1.7483.2.1.1.2.17.17.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IP ACL filter associated with the specified NetIf and direction.
| |||||||||||||
| CtnSysIpv6AclNetIfFilterSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.17.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL NetIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user. | |||||||||||||
| StnSysIpAclEthIfFilterAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.18 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpAclEthIfFilterTable | 1.3.6.1.4.1.7483.2.1.1.2.17.19 | NA | |||||||||||
table · not-accessible · current The IP ACL EthIf table is used to associate or disassociate filters with particular EthIf. Two filters may be associated with each EthIf, one receive and one transmit. The receive and transmit filters on an EthIf may be independently enabled and disabled on that EthIf without disassociating the specific filter numbers. | |||||||||||||
| RtnSysIpAclEthIfFilterEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.19.1 | NA | |||||||||||
| CtnSysIpAclEthIfFilterDir | 1.3.6.1.4.1.7483.2.1.1.2.17.19.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Direction on the specified EthIf to which the IP ACL filter will be associated.
| |||||||||||||
| CtnSysIpAclEthIfFilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.19.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of EthIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface. | |||||||||||||
| CtnSysIpAclEthIfFilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.19.1.3 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current Identifier for the ACL filter being associated with the specified EthIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter. | |||||||||||||
| CtnSysIpAclEthIfFilterEnable | 1.3.6.1.4.1.7483.2.1.1.2.17.19.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IP ACL filter associated with the specified EthIf and direction.
| |||||||||||||
| CtnSysIpAclEthIfFilterSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.19.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL EthIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user. | |||||||||||||
| StnSysIpv6AclEthIfFilterAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.20 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysIpv6AclEthIfFilterTable | 1.3.6.1.4.1.7483.2.1.1.2.17.21 | NA | |||||||||||
table · not-accessible · current The IPV6 ACL EthIf table is used to associate or disassociate filters with particular EthIf. Two filters may be associated with each EthIf, one receive and one transmit. The receive and transmit filters on an EthIf may be independently enabled and disabled on that EthIf without disassociating the specific filter numbers. | |||||||||||||
| RtnSysIpv6AclEthIfFilterEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.21.1 | NA | |||||||||||
| CtnSysIpv6AclEthIfFilterDir | 1.3.6.1.4.1.7483.2.1.1.2.17.21.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Direction on the specified EthIf to which the IP ACL filter will be associated.
| |||||||||||||
| CtnSysIpv6AclEthIfFilterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.17.21.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of EthIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface. | |||||||||||||
| CtnSysIpv6AclEthIfFilterID | 1.3.6.1.4.1.7483.2.1.1.2.17.21.1.3 | SnmpAdminString (SIZE (0..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..30)) · read-create · current Identifier for the ACL filter being associated with the specified EthIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter. | |||||||||||||
| CtnSysIpv6AclEthIfFilterEnable | 1.3.6.1.4.1.7483.2.1.1.2.17.21.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable or disable the IPV6 ACL filter associated with the specified EthIf and direction.
| |||||||||||||
| CtnSysIpv6AclEthIfFilterSystemDefault | 1.3.6.1.4.1.7483.2.1.1.2.17.21.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Indicates if ACL EthIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user. | |||||||||||||
| StnSysIpAclAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.22 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This parameter indicates the total IPACL rules can be supported in tnSysIpAclTable. | |||||||||||||
| TtnSysIpAclTable | 1.3.6.1.4.1.7483.2.1.1.2.17.23 | NA | |||||||||||
table · not-accessible · current Table of IP ACL rule. An ACL rule is a set of packet field descriptors that can be tested against a packet. For a rule to match, each of its field descriptors must fit the data in the packet. | |||||||||||||
| RtnSysIpAclEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1 | NA | |||||||||||
| CtnSysIpAclIndex | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The values of 1 to 512 represent the index of IPACL.
Default is the number of existing rules + 1, or a number
between 1 and the number of existing rules (in this case
existing rules after indes will be shifted to index + 1).
For modify: an index of an existing rule.
For delete: a delete will shift existing rules after
index to index - 1.
The maximum number of ACL rules is 512.
The valid index range is from 1 to 512.
If index is not provided by CLI/NMS when a new rule is
added, index 65535 shall be used, NE SW will add a
new rule using the index with the number of existing
rules + 1. | |||||||||||||
| CtnSysIpAclDesc | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.2 | SnmpAdminString (SIZE (0..255)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-create · current Short description about the purpose of this rule. | |||||||||||||
| CtnSysIpAclAccessID | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.3 | SnmpAdminString (SIZE (1..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..30)) · read-create · current The access ID of the ACL to be created. It could be one of the following strings: SSH, MAINTSSH, ALTCLI, SNMP, DHCP, OA, GNMIGRPC, RADIUS, NTP, OSPF, ICMP, TRACERT, MCLAG, SYSLOGU, SFTPC or IP. | |||||||||||||
| CtnSysIpAclInterface | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.4 | Unsigned32 (0..64) | RC | ||||||||||
column · Unsigned32 (0..64) · read-create · current Access identifier for the interface Index. It could be one of the following cases: - 41: All - 42: LAN=LAN1+LAN2 - 43: All ETHIF - Ifindex of LAN1 - ifindex of LAN2 - ifindex of CIT - tnEthIfIndex of EthIF, 1...30 for TPS-24; 1...14 for TPS-12. | |||||||||||||
| CtnSysIpAclAction | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Action to be taken on packets matching the specified ACL
pattern. Valid values are:
accept - allow the packet if it matches all the pattern
descriptors
drop - matching packets are discarded
reject - matching packets are discarded; an ICMP error
message is sent back
log - log the packet if it matches all the pattern
descriptors.
| |||||||||||||
| CtnSysIpAclSrcPort | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.6 | SnmpAdminString (SIZE (1..15)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..15)) · read-create · current TCP/UDP source port. It can be a range[0-65535:0-65535]. | |||||||||||||
| CtnSysIpAclDestPort | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.7 | SnmpAdminString (SIZE (1..15)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..15)) · read-create · current TCP/UDP destination port. It can be a range[0-65535:0-65535]. | |||||||||||||
| CtnSysIpAclIcmpType | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.8 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMP Type identifier. It is applicable only when IPPROTOCOL is ICMP. If specified, the pattern will match only packets with this exact ICMP type. Some of the most commonly used ICMP types are: 0 Echo Reply [RFC792] 3 Destination Unreachable[RFC792] 5 Redirect[RFC792] 9 Router Advertisement[RFC1256] 42-255 Reserved. | |||||||||||||
| CtnSysIpAclIcmpCode | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.9 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMP code field. It is applicable only when IP protocol is ICMP and is used along with certain ICMP types to further specify the message type. It must also specify the ICMP type when setting this parameter. If specified, the pattern will only match packets with this exact ICMP code value. For example, there are a few ICMPCODEs associated with the ICMPTYPE Redirect [RFC792]: 0 Redirect Datagram for the Network (or subnet) 1 Redirect Datagram for the Host 2 Redirect Datagram for the Type of Service and Network 3 Redirect Datagram for the Type of Service and Host. | |||||||||||||
| CtnSysIpAclIpProtocol | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.10 | OCTET STRING (SIZE (1..15)) | RC | ||||||||||
column · OCTET STRING (SIZE (1..15)) · read-create · current IP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMP - IP protocol is ICMP (1) IPIP - IP protocol is IPIP (4) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPF - IP protocol is OSPF (89) <other protocol> - Specify IP protocol number: 0 to 255. | |||||||||||||
| CtnSysIpAclSrcAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.11 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Source IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefix parameter to specify a range of supported originating IP addresses. | |||||||||||||
| CtnSysIpAclSrcPrefix | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.12 | Integer32 (0..32) | RC | ||||||||||
column · Integer32 (0..32) · read-create · current Source IP mask prefix. If the SrcAddr is specified and the SrcPrefix is unspecified (0), the originating IP address of the packet must match the SrcAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the SrcAddr is also specified. | |||||||||||||
| CtnSysIpAclDestAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.13 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Destination IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefix parameter to specify a range of supported destination IP addresses. | |||||||||||||
| CtnSysIpAclDestPrefix | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.14 | Integer32 (0..32) | RC | ||||||||||
column · Integer32 (0..32) · read-create · current Destination IP Mask Prefix. If the DestAddr is specified and the DestPrefix is unspecified (0), The originating IP address of the packet must match the DestAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the DestAddr is also specified. | |||||||||||||
| CtnSysIpAclIpFragment | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.15 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current IP Fragmentation. True means that the filtering is done on all fragments, not just on the initial one (assuming the following ones are ok). Valid values are: true - pattern is an IP false - pattern is not an IP fragment. | |||||||||||||
| CtnSysIpAclTcpEstablish | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.16 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current TCP established flag. It matches a packet depending on
whether the TCP flags in the IP header correspond to the
established state. Valid values are:
true - TCP flags correspond to established state
false - TCP flags do not correspond to established
local - TCP flags correspond to established state
only for destination to local NE.
| |||||||||||||
| CtnSysIpAclStatCount | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Packet match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern. | |||||||||||||
| CtnSysIpAclAdminState | 1.3.6.1.4.1.7483.2.1.1.2.17.23.1.18 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The admin status of IPACL. All the IPACL rules will be generated automatically when NE DB is generated for the first time. For example, we may have the 512 rules that are generated by default including the default IPACL rules. All default IPACL rules have AdminState 'active(1)', while others have AdminState 'deactivate(2)'. Only items with 'active(1)' will be sent to Linux IPTable for further processing. The item with AdminState 'deactivate(2)' will be removed from Linux IPTable. For example, we have the following default rules: IPACL index IPACL AdminState 1 active 2 active 3 active If a new IPACL rule is activated after IPACL index 3, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active 4 active If a new IPACL rule is activated after IPACL index 2, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active <- newly added 4 active <- change IPACL index 3 to 4 5 active <- change IPACL index 4 to 5 If index 2 is deactivated, then we have: IPACL index, IPACL Adminstate 1 active 2 active <- change IPACL index 3 to 2 3 active <- change IPACL index 4 to 3 4 active <- change IPACL index 5 to 4 Only the rules with 'AdminState(1)' can be retrieved.
| |||||||||||||
| StnSysIpv6AclAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.17.24 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This parameter indicates the total IPACL rules can be supported in tnSysIpv6AclTable. | |||||||||||||
| TtnSysIpv6AclTable | 1.3.6.1.4.1.7483.2.1.1.2.17.25 | NA | |||||||||||
table · not-accessible · current Table of IP ACL rule. An ACL rule is a set of packet field descriptors that can be tested against a packet. For a rule to match, each of its field descriptors must fit the data in the packet. | |||||||||||||
| RtnSysIpv6AclEntry | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1 | NA | |||||||||||
| CtnSysIpv6AclIndex | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The values of 1 to 512 represent the index of IPACL.
Default is the number of existing rules + 1, or a number
between 1 and the number of existing rules (in this case
existing rules after indes will be shifted to index + 1).
For modify: an index of an existing rule.
For delete: a delete will shift existing rules after
index to index - 1.
The maximum number of ACL rules is 512.
The valid index range is from 1 to 512.
If index is not provided by CLI/NMS when a new rule is
added, index 65535 shall be used, NE SW will add a
new rule using the index with the number of existing
rules + 1. | |||||||||||||
| CtnSysIpv6AclDesc | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.2 | SnmpAdminString (SIZE (0..255)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-create · current Short description about the purpose of this rule. | |||||||||||||
| CtnSysIpv6AclAccessID | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.3 | SnmpAdminString (SIZE (1..30)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..30)) · read-create · current The access ID of the ACL to be created, it could be one of the following strings: SSH, MAINTSSH, ALTCLI, SNMP, OA, NMIGRPC, RADIUS, NTP, ICMPV6, TRACERT, MCLAG, SYSLOGU, SFTPC or IP. | |||||||||||||
| CtnSysIpv6AclInterface | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.4 | Unsigned32 (1..64) | RC | ||||||||||
column · Unsigned32 (1..64) · read-create · current Access identifier for the interface Index. It could be one of the following cases: - 41: All - 42: LAN=LAN1+LAN2 - 43: All ETHIF - Ifindex of LAN1 - ifindex of LAN2 - ifindex of CIT - tnEthIfIndex of EthIF, 1...30 for TPS-24, 1...14 for TPS-12. | |||||||||||||
| CtnSysIpv6AclAction | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Action to be taken on packets matching the specified ACL
pattern. Valid values are:
accept - allow the packet if it matches all the pattern
descriptors
drop - matching packets are discarded
reject - matching packets are discarded; an ICMP error
message is sent back
log - log the packet if it matches all the pattern
descriptors.
| |||||||||||||
| CtnSysIpv6AclSrcPort | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.6 | SnmpAdminString (SIZE (1..15)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..15)) · read-create · current TCP/UDP source port. It can be a range[0-65535:0-65535] | |||||||||||||
| CtnSysIpv6AclDestPort | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.7 | SnmpAdminString (SIZE (1..15)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..15)) · read-create · current TCP/UDP destination port. It can be a range[0-65535:0-65535]. | |||||||||||||
| CtnSysIpv6AclIcmpType | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.8 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMP Type identifier. It is applicable only when IPPROTOCOL is ICMP. If specified, the pattern will match only packets with this exact ICMP type. Some of the most commonly used ICMP types are: 0 Echo Reply [RFC792] 3 Destination Unreachable[RFC792] 5 Redirect[RFC792] 9 Router Advertisement[RFC1256] 42-255 Reserved. | |||||||||||||
| CtnSysIpv6AclIcmpCode | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.9 | Integer32 (0..255) | RC | ||||||||||
column · Integer32 (0..255) · read-create · current ICMP code field. It is applicable only when IP protocol is ICMP and is used along with certain ICMP types to further specify the message type. It must also specify the ICMP type when setting this parameter. If specified, the pattern will only match packets with this exact ICMP code value. For example, there are a few ICMPCODEs associated with the ICMPTYPE Redirect [RFC792]: 0 Redirect Datagram for the Network (or subnet) 1 Redirect Datagram for the Host 2 Redirect Datagram for the Type of Service and Network 3 Redirect Datagram for the Type of Service and Host. | |||||||||||||
| CtnSysIpv6AclIpProtocol | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.10 | OCTET STRING (SIZE (1..15)) | RC | ||||||||||
column · OCTET STRING (SIZE (1..15)) · read-create · current IP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMP - IP protocol is ICMP (1) IPIP - IP protocol is IPIP (4) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPF - IP protocol is OSPF (89) <other protocol> - Specify IP protocol number: 0 to 255. | |||||||||||||
| CtnSysIpv6AclSrcAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.11 | InetAddressIPv6 | RC | ||||||||||
column · InetAddressIPv6 · read-create · current Source IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefixLen parameter to specify a range of supported originating IPV6 addresses. | |||||||||||||
| CtnSysIpv6AclSrcPrefixLen | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.12 | InetAddressPrefixLength | RC | ||||||||||
column · InetAddressPrefixLength · read-create · current Denotes the length of source IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0. | |||||||||||||
| CtnSysIpv6AclDestAddr | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.13 | InetAddressIPv6 | RC | ||||||||||
column · InetAddressIPv6 · read-create · current Destination IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefixLen parameter to specify a range of supported destination IPV6 addresses. | |||||||||||||
| CtnSysIpv6AclDestPrefixLen | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.14 | InetAddressPrefixLength | RC | ||||||||||
column · InetAddressPrefixLength · read-create · current Denotes the length of destination IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0. | |||||||||||||
| CtnSysIpv6AclTcpEstablish | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.15 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current TCP established flag. It matches a packet depending on
whether the TCP flags in the IP header correspond to the
established state. Valid values are:
true - TCP flags correspond to established state
false - TCP flags do not correspond to established
local - TCP flags correspond to established state only
for destination to local NE.
| |||||||||||||
| CtnSysIpv6AclStatCount | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Packet match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern. | |||||||||||||
| CtnSysIpv6AclAdminState | 1.3.6.1.4.1.7483.2.1.1.2.17.25.1.17 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The admin status of IPACL. All the IPACL rules will be generated automatically when NE DB is generated for the first time. For example, we may have the 512 rules that are generated by default including the default IPACL rules. All default IPACL rules have AdminState 'active(1)', while others have AdminState 'deactivate(2)'. Only items with 'active(1)' will be sent to Linux IPTable for further processing, the item with AdminState 'deactivate(2)' will be removed from Linux IPTable. For example, we have the following default rules: IPACL index, IPACL AdminState 1 active 2 active 3 active If a new IPACL rule is activated after IPACL index 3, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active 4 active If a new IPACL rule is activated after IPACL index 2, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active <- newly added 4 active <- change IPACL index 3 to 4 5 active <- change IPACL index 4 to 5 If index 2 is deactivated, then we have: IPACL index, IPACL Adminstate 1 active 2 active <- change IPACL index 3 to 2 3 active <- change IPACL index 4 to 3 4 active <- change IPACL index 5 to 4 Only the rules with AdminState(1) can be retrieved.
| |||||||||||||
| NtnSysNtpServerIdStats | 1.3.6.1.4.1.7483.2.1.1.2.18 | ||||||||||||
| TtnSysNtpServerIdStatsTable | 1.3.6.1.4.1.7483.2.1.1.2.18.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysNtpServerIdStatsEntry | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1 | NA | |||||||||||
| CtnSysNtpServerIdStatsIndex | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.1 | Unsigned32 (1..8) | NA | ||||||||||
column · Unsigned32 (1..8) · not-accessible · current For the 1830 PSS-32. The maximum number of supported NTP servers is 8. | |||||||||||||
| CtnSysNtpServerIdStatsSelect | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.2 | SnmpAdminString (SIZE (0..2)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..2)) · read-only · current Character to be displayed is one of the following: '*' - selected reference '+' - member of the alternate references ' ' - disqualified. | |||||||||||||
| CtnSysNtpServerIdStatsIp | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.3 | SnmpAdminString (SIZE (0..48)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..48)) · read-only · current NTP server IP address. | |||||||||||||
| CtnSysNtpServerIdStatsRefId | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.4 | SnmpAdminString (SIZE (0..48)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..48)) · read-only · current NTP reference ID. | |||||||||||||
| CtnSysNtpServerIdStatsStrtm | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.5 | SnmpAdminString (SIZE (0..3)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..3)) · read-only · current Level of reference, from 1 - 16. | |||||||||||||
| CtnSysNtpServerIdStatsClockType | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.6 | SnmpAdminString (SIZE (0..2)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..2)) · read-only · current Clock type: 'u' - unicast 'b' - broadcast 'l' - local. | |||||||||||||
| CtnSysNtpServerIdStatsPoll | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.7 | SnmpAdminString (SIZE (0..6)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..6)) · read-only · current Polling interval in log base 2 seconds. | |||||||||||||
| CtnSysNtpServerIdStatsReach | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.8 | SnmpAdminString (SIZE (0..4)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..4)) · read-only · current 8 bit octal number representing success of last 8 attempts. | |||||||||||||
| CtnSysNtpServerIdStatsDelay | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.9 | SnmpAdminString (SIZE (0..12)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..12)) · read-only · current Round trip delay to the reference server. | |||||||||||||
| CtnSysNtpServerIdStatsOffset | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.10 | SnmpAdminString (SIZE (0..12)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..12)) · read-only · current . | |||||||||||||
| CtnSysNtpServerIdStatsJitter | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.11 | SnmpAdminString (SIZE (0..12)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..12)) · read-only · current . | |||||||||||||
| CtnSysNtpServerIdStatsKeyIndex | 1.3.6.1.4.1.7483.2.1.1.2.18.1.1.12 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current . | |||||||||||||
| NtnSysFtpServer | 1.3.6.1.4.1.7483.2.1.1.2.19 | ||||||||||||
| StnSysFtpServerEnabled | 1.3.6.1.4.1.7483.2.1.1.2.19.1 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current true - FTP server function is enabled. false - FTP server function is disabled. | |||||||||||||
| StnSysFtpServerUserId | 1.3.6.1.4.1.7483.2.1.1.2.19.2 | SnmpAdminString (SIZE (0..128)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-only · current The FTP server user ID. | |||||||||||||
| StnSysFtpServerPassword | 1.3.6.1.4.1.7483.2.1.1.2.19.3 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The FTP server password. When read, this attribute will return '********'. | |||||||||||||
| NtnSysNtpServerAuthentication | 1.3.6.1.4.1.7483.2.1.1.2.20 | ||||||||||||
| StnSysNtpServerAuthenticationAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.20.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysNtpServerAuthenticationTable | 1.3.6.1.4.1.7483.2.1.1.2.20.2 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysNtpServerAuthenticationEntry | 1.3.6.1.4.1.7483.2.1.1.2.20.2.1 | NA | |||||||||||
| CtnSysNtpServerAuthenticationKeyIndex | 1.3.6.1.4.1.7483.2.1.1.2.20.2.1.1 | Unsigned32 (0..65535) | NA | ||||||||||
column · Unsigned32 (0..65535) · not-accessible · current NTP server authentication key index. | |||||||||||||
| CtnSysNtpServerAuthenticationRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.20.2.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Status of this NTP server. Supported values: 1 - active 4 - createAndGo 6 - destroy. | |||||||||||||
| CtnSysNtpServerAuthenticationKeyType | 1.3.6.1.4.1.7483.2.1.1.2.20.2.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current NTP server authentication key type.
| |||||||||||||
| CtnSysNtpServerAuthenticationKey | 1.3.6.1.4.1.7483.2.1.1.2.20.2.1.4 | OCTET STRING (SIZE (0..500)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..500)) · read-create · current NTP server authentication key. | |||||||||||||
| NtnNeDiscovery | 1.3.6.1.4.1.7483.2.1.1.2.21 | ||||||||||||
| StnNeDiscoveryAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.21.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnNeDiscoveryTable | 1.3.6.1.4.1.7483.2.1.1.2.21.2 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnNeDiscoveryEntry | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1 | NA | |||||||||||
| CtnNeDiscoveryIndex | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.1 | SnmpAdminString (SIZE (1..28)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..28)) · not-accessible · current Unique name given by the NMS. | |||||||||||||
| CtnNeDiscoveryFilename | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.2 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current . | |||||||||||||
| CtnNeDiscoveryControl | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Controls the discovery, i.e., starts or aborts it.
| |||||||||||||
| CtnNeDiscoveryStatus | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The discovery status.
| |||||||||||||
| CtnNeDiscoveryErrorCode | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The discovery error code.
| |||||||||||||
| CtnNeDiscoveryServerIp | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.6 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The discovery server IP address. | |||||||||||||
| CtnNeDiscoveryServerProtocol | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.7 | AluWdmNewTransferProtocol | RC | ||||||||||
column · AluWdmNewTransferProtocol · read-create · current The discovery server protocol. | |||||||||||||
| CtnNeDiscoveryServerUserId | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.8 | SnmpAdminString (SIZE (1..128)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..128)) · read-create · current The user ID used to access the server. | |||||||||||||
| CtnNeDiscoveryServerPassword | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.9 | SnmpAdminString (SIZE (1..128)) | RC | ||||||||||
column · SnmpAdminString (SIZE (1..128)) · read-create · current The password used to access the server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| CtnNeDiscoveryServerTimeOut | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.10 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Timeout from NMS for the discovery request. | |||||||||||||
| CtnNeDiscoveryRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status of this discovery. | |||||||||||||
| CtnNeDiscoveryServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.12 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnNeDiscoveryServerInetAddress. | |||||||||||||
| CtnNeDiscoveryServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.13 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address of the log server. | |||||||||||||
| CtnNeDiscoveryDeltaFilename | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.14 | SnmpAdminString | RC | deprecated | |||||||||
column · SnmpAdminString · read-create · deprecated . | |||||||||||||
| CtnNeDiscoveryDeltaFileFlag | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.15 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Delta File Flag.
| |||||||||||||
| CtnNeDiscoveryDeltaSyncStatus | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.16 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current Active sync status. | |||||||||||||
| CtnNeDiscoveryPort | 1.3.6.1.4.1.7483.2.1.1.2.21.2.1.17 | Unsigned32 (1..65535) | RC | ||||||||||
column · Unsigned32 (1..65535) · read-create · current . | |||||||||||||
| NtnSysOtdrScan | 1.3.6.1.4.1.7483.2.1.1.2.22 | ||||||||||||
| NtnSysOtdrScanSystemProfile | 1.3.6.1.4.1.7483.2.1.1.2.22.1 | ||||||||||||
| StnSysOtdrScanSystemProfileAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.22.1.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysOtdrScanSystemProfileTable | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysOtdrScanSystemProfileEntry | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1 | NA | |||||||||||
| CtnSysOtdrScanSystemProfileId | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.1 | Integer32 (1..9) | NA | ||||||||||
column · Integer32 (1..9) · not-accessible · current Unique identifier for the profile. Range is from 1 to 9. | |||||||||||||
| CtnSysOtdrScanSystemProfileDescription | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.2 | SnmpAdminString (SIZE (0..80)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..80)) · read-create · current Describes the scan profile. | |||||||||||||
| CtnSysOtdrScanSystemProfileWaveLength | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The wavelength used for the OTDR scan. The wavelength is 1610 nm, and is not configurable.
| |||||||||||||
| CtnSysOtdrScanSystemProfilePulseLength | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.4 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Length of the pulse. Current values: 5, 10, 30, 100, 300, 1000, 3000, 10000, and 20000.
| |||||||||||||
| CtnSysOtdrScanSystemProfileRange | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.5 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current The range of the span that is being probed in
meters.
Current values: 500, 1000, 2000, 5000,
10000, 20000, 40000, 80000, 160000 and 260000.
| |||||||||||||
| CtnSysOtdrScanSystemProfileResolution | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.6 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Distance resolution of the OTDR scan.
Current values: 40, 80, 160, 320, 640, 1200,
2500, 5000, 10000, 20000, 40000, 80000, and
160000.
| |||||||||||||
| CtnSysOtdrScanSystemProfileAvgTime | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.7 | Unsigned32 (5..300) | RC | ||||||||||
column · Unsigned32 (5..300) · read-create · current Signal averaging time for a scan range. Current range: 5 to 300.
| |||||||||||||
| CtnSysOtdrScanSystemProfileEventThreshold | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.8 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Sys Otdr Scan Event Threshold. Current range: 5 to 100.
| |||||||||||||
| CtnSysOtdrScanSystemProfileIOR | 1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.9 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Sys Otdr Scan IOR. Current range: 1400 to 1600. | |||||||||||||
| NtnSysOtdrScanTransfer | 1.3.6.1.4.1.7483.2.1.1.2.22.2 | ||||||||||||
| StnSysOtdrScanTransferRemoteHostIp | 1.3.6.1.4.1.7483.2.1.1.2.22.2.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current OTDR scan transfer remote host IP address. | |||||||||||||
| StnSysOtdrScanTransferCommand | 1.3.6.1.4.1.7483.2.1.1.2.22.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current OTDR scan transfer command.
| |||||||||||||
| StnSysOtdrScanTransferRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.22.2.3 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current OTDR scan transfer remote path. | |||||||||||||
| StnSysOtdrScanTransferStatus | 1.3.6.1.4.1.7483.2.1.1.2.22.2.4 | AluWdmTransferStatus | RO | ||||||||||
scalar · AluWdmTransferStatus · read-only · current This attribute indicates the status of the previously executed tnSysOtdrScanTransferCommand operation. | |||||||||||||
| StnSysOtdrScanTransferFilename | 1.3.6.1.4.1.7483.2.1.1.2.22.2.5 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This attribute indicates the filename for the OTDR file transfer performed on the node. If it specifies empty string then bulk transfer the files from NE to RFs. And if it specifies file name then it is single file transfer. File information can be from the tnOtdrScanStatusSuccessNotif trap. | |||||||||||||
| StnSysOtdrScanTransferProtocol | 1.3.6.1.4.1.7483.2.1.1.2.22.2.6 | AluWdmTransferProtocol | RW | ||||||||||
scalar · AluWdmTransferProtocol · read-write · current This attributes indicates the OTDR scan transfer protocol. Currently, only sftp/ftp is supported. | |||||||||||||
| StnSysOtdrScanTransferUserId | 1.3.6.1.4.1.7483.2.1.1.2.22.2.7 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The userId is used to access the RFS. | |||||||||||||
| StnSysOtdrScanTransferPassword | 1.3.6.1.4.1.7483.2.1.1.2.22.2.8 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysOtdrScanTransferInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.22.2.9 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in OTDR SCAN | |||||||||||||
| StnSysOtdrScanTransferInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.22.2.10 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the OTDR SCAN | |||||||||||||
| StnSysOtdrScanTransferPort | 1.3.6.1.4.1.7483.2.1.1.2.22.2.11 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current This attribute indicates the otdr port. | |||||||||||||
| NtnSysOtdrScanSystemProfileM | 1.3.6.1.4.1.7483.2.1.1.2.22.3 | ||||||||||||
| StnSysOtdrScanSystemProfileMAttributeTotal | 1.3.6.1.4.1.7483.2.1.1.2.22.3.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current . | |||||||||||||
| TtnSysOtdrScanSystemProfileMTable | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysOtdrScanSystemProfileMEntry | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1 | NA | |||||||||||
| CtnSysOtdrScanSystemProfileMId | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.1 | Integer32 (1..7) | NA | ||||||||||
column · Integer32 (1..7) · not-accessible · current Unique identifier for the profile. Range is from 1 to 7. | |||||||||||||
| CtnSysOtdrScanSystemProfileMDescription | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.2 | SnmpAdminString (SIZE (0..80)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..80)) · read-create · current Describes the scan profile. | |||||||||||||
| CtnSysOtdrScanSystemProfileMWaveLength | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The wavelength used for the OTDR scan. The wavelength is 1610 nm, and is not configurable.
| |||||||||||||
| CtnSysOtdrScanSystemProfileMPulseLength | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.4 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Length of the pulse. Current values: 5, 10, 30, 100, 300, 1000, 3000, 10000, and 20000.
| |||||||||||||
| CtnSysOtdrScanSystemProfileMRange | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.5 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current The range of the span that is being probed in
meters.
Current values: 500, 1000, 2000, 5000,
10000, 20000, 40000, 80000, 160000 and 260000.
| |||||||||||||
| CtnSysOtdrScanSystemProfileMResolution | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.6 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Distance resolution of the OTDR scan.
Current values: 40, 80, 160, 320, 640, 1200,
2500, 5000, 10000, 20000, 40000, 80000, and
160000.
| |||||||||||||
| CtnSysOtdrScanSystemProfileMAvgTime | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.7 | Unsigned32 (5..300) | RC | ||||||||||
column · Unsigned32 (5..300) · read-create · current Signal averaging time for a scan range. Current range: 5 to 300.
| |||||||||||||
| CtnSysOtdrScanSystemProfileMEventThreshold | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.8 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Sys Otdr Scan Event Threshold. Current range: 5 to 100.
| |||||||||||||
| CtnSysOtdrScanSystemProfileMIOR | 1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Sys Otdr Scan IOR. Current range: 1400 to 1600. | |||||||||||||
| NtnSysOtdrScanResultsTransfer | 1.3.6.1.4.1.7483.2.1.1.2.22.4 | ||||||||||||
| StnSysOtdrScanResultsTransferRemoteHostIp | 1.3.6.1.4.1.7483.2.1.1.2.22.4.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current OTDR scan results transfer remote host IP address. | |||||||||||||
| StnSysOtdrScanResultsTransferProtocol | 1.3.6.1.4.1.7483.2.1.1.2.22.4.2 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current This attributes indicates the OTDR scan results transfer protocol. Currently, only sftp/ftp is supported. | |||||||||||||
| StnSysOtdrScanResultsTransferUserId | 1.3.6.1.4.1.7483.2.1.1.2.22.4.3 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The userId is used to access the RFS. | |||||||||||||
| StnSysOtdrScanResultsTransferPassword | 1.3.6.1.4.1.7483.2.1.1.2.22.4.4 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysOtdrScanResultsTransferRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.22.4.5 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current OTDR scan results transfer remote path. | |||||||||||||
| StnSysOtdrScanResultsTransferCommand | 1.3.6.1.4.1.7483.2.1.1.2.22.4.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current OTDR scan results transfer command.
| |||||||||||||
| StnSysOtdrScanResultsTransferFilename | 1.3.6.1.4.1.7483.2.1.1.2.22.4.7 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This attribute indicates the filename for the OTDR file results transfer performed on the node. | |||||||||||||
| StnSysOtdrScanResultsTransferRecentSuccessFile | 1.3.6.1.4.1.7483.2.1.1.2.22.4.8 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current This attribute indicates the filename for the recent successful OTDR scan results file transfered on the node. | |||||||||||||
| StnSysOtdrScanResultsTransferStatus | 1.3.6.1.4.1.7483.2.1.1.2.22.4.9 | AluWdmTransferStatus | RO | ||||||||||
scalar · AluWdmTransferStatus · read-only · current This attribute indicates the status of the previously executed tnSysOtdrScanResultsTransferStatus operation. | |||||||||||||
| StnSysOtdrScanResultsLastTransferTimestamp | 1.3.6.1.4.1.7483.2.1.1.2.22.4.10 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The date and time when the last file transfer was completed. | |||||||||||||
| StnSysOtdrScanResultsTransferRemoteInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.22.4.11 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysOtdrScanResultsTransferRemoteInetAddress. | |||||||||||||
| StnSysOtdrScanResultsTransferRemoteInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.22.4.12 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the remote server. | |||||||||||||
| StnSysOtdrScanResultsTransferPort | 1.3.6.1.4.1.7483.2.1.1.2.22.4.13 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current This attributes indicates the otdr port. | |||||||||||||
| StnSysOtdrScanResultsTransferRemoveFileFromNE | 1.3.6.1.4.1.7483.2.1.1.2.22.4.14 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Remove the selected .sor file from the NE. | |||||||||||||
| NtnClusterObjs | 1.3.6.1.4.1.7483.2.1.1.2.23 | ||||||||||||
| TtnClusterTable | 1.3.6.1.4.1.7483.2.1.1.2.23.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnClusterEntry | 1.3.6.1.4.1.7483.2.1.1.2.23.1.1 | NA | |||||||||||
| CtnClusterRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.23.1.1.1 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current . | |||||||||||||
| CtnClusterFarEndNode | 1.3.6.1.4.1.7483.2.1.1.2.23.1.1.2 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current . | |||||||||||||
| CtnClusterIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.23.1.1.3 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current . | |||||||||||||
| CtnClusterlinkStatus | 1.3.6.1.4.1.7483.2.1.1.2.23.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Cluster link status.
| |||||||||||||
| CtnClusterInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.23.1.1.5 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in Cluster. | |||||||||||||
| CtnClusterInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.23.1.1.6 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address of the Cluster. | |||||||||||||
| NtnSysPmFetchBulk | 1.3.6.1.4.1.7483.2.1.1.2.24 | ||||||||||||
| StnSysPmFetchBulkStart | 1.3.6.1.4.1.7483.2.1.1.2.24.1 | TnCommand | RW | ||||||||||
scalar · TnCommand · read-write · current Intiates the PM Fetch bulk operation. | |||||||||||||
| StnSysPmFetchBulkStatus | 1.3.6.1.4.1.7483.2.1.1.2.24.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the status of the PM Fetch Bulk.
| |||||||||||||
| StnSysPmFetchBulkRemoteHostIp | 1.3.6.1.4.1.7483.2.1.1.2.24.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current PM Fetch Bulk remote host IP address. | |||||||||||||
| StnSysPmFetchBulkUserId | 1.3.6.1.4.1.7483.2.1.1.2.24.4 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current Indicates the username of the user who intiates PM fetch Bulk operation. | |||||||||||||
| StnSysPmFetchBulkPassword | 1.3.6.1.4.1.7483.2.1.1.2.24.5 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current Indicates the password of the user who intiates PM fetch Bulk operation. | |||||||||||||
| StnSysPmFetchBulkRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.24.6 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current PM fetch Bulk remote path. | |||||||||||||
| StnSysPmFetchBulkStatsInterval | 1.3.6.1.4.1.7483.2.1.1.2.24.7 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysPmFetchBulkBinnedStatsBin | 1.3.6.1.4.1.7483.2.1.1.2.24.8 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnSysPmFetchBulkShelfNum | 1.3.6.1.4.1.7483.2.1.1.2.24.9 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current . | |||||||||||||
| NtnSysDebugTransfer | 1.3.6.1.4.1.7483.2.1.1.2.25 | ||||||||||||
| StnSysDebugTransferRemoteHostIp | 1.3.6.1.4.1.7483.2.1.1.2.25.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Debug dump transfer remote host IP address. | |||||||||||||
| StnSysDebugTransferCommand | 1.3.6.1.4.1.7483.2.1.1.2.25.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Debug dump transfer command.
| |||||||||||||
| StnSysDebugTransferRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.25.3 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Debug dump transfer remote path. | |||||||||||||
| StnSysDebugTransferStatus | 1.3.6.1.4.1.7483.2.1.1.2.25.4 | AluWdmTransferStatus | RO | ||||||||||
scalar · AluWdmTransferStatus · read-only · current This attribute indicates the status of the previously executed tnSysDebugTransferCommand operation. | |||||||||||||
| StnSysDebugTransferProtocol | 1.3.6.1.4.1.7483.2.1.1.2.25.5 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current This attributes indicates the Debug dump transfer protocol. Currently, only sftp/ftp is supported. | |||||||||||||
| StnSysDebugTransferUserId | 1.3.6.1.4.1.7483.2.1.1.2.25.6 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The userId is used to access the RFS. | |||||||||||||
| StnSysDebugTransferPassword | 1.3.6.1.4.1.7483.2.1.1.2.25.7 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysDebugTransferFilename | 1.3.6.1.4.1.7483.2.1.1.2.25.8 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current This attribute indicates the filename for the Debug Dump file transfer performed on the node. | |||||||||||||
| StnSysDebugTransferRecentSuccessFile | 1.3.6.1.4.1.7483.2.1.1.2.25.9 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current This attribute indicates the filename for the recent successful Debug Dump file transfered on the node. | |||||||||||||
| StnSysDebugTransferTimestamp | 1.3.6.1.4.1.7483.2.1.1.2.25.10 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The date and time when the last file was completed. | |||||||||||||
| StnSysDebugTransferShelfNum | 1.3.6.1.4.1.7483.2.1.1.2.25.11 | Integer32 (1..31) | RW | ||||||||||
scalar · Integer32 (1..31) · read-write · current ShelfNum where the transfer has to be initiated. | |||||||||||||
| StnSysDebugTransferPercentCompleted | 1.3.6.1.4.1.7483.2.1.1.2.25.12 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The percent completion of the previously executed operation. | |||||||||||||
| StnSysDebugTransferRemoteInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.25.14 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the remote server. | |||||||||||||
| StnSysDebugTransferRemoteInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.25.15 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysDebugTransferRemoteInetAddress. | |||||||||||||
| StnSysDebugTransferScratchDir | 1.3.6.1.4.1.7483.2.1.1.2.25.16 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..512)) · read-only · current This contains the file's size in KB, their access date and the filename as 3 attributes per output line format similar to output from ls -ogth. | |||||||||||||
| StnSysDebugTransferIncludeInDumps | 1.3.6.1.4.1.7483.2.1.1.2.25.17 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current expert - value for include-in-dumps shall have core
files included.
basic - value for include-in-dumps shall have core
files omitted.
occ - occ log transfer support for PSI2T.
| |||||||||||||
| StnSysDebugTransferPort | 1.3.6.1.4.1.7483.2.1.1.2.25.18 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current This attributes indicates the debugdump port. | |||||||||||||
| NtnSysLicenseInv | 1.3.6.1.4.1.7483.2.1.1.2.26 | ||||||||||||
| StnSysLicenseInvPathIp | 1.3.6.1.4.1.7483.2.1.1.2.26.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current . | |||||||||||||
| StnSysLicenseInvFile | 1.3.6.1.4.1.7483.2.1.1.2.26.2 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current . | |||||||||||||
| StnSysLicenseInvProtocol | 1.3.6.1.4.1.7483.2.1.1.2.26.3 | AluWdmTransferProtocol | RW | ||||||||||
scalar · AluWdmTransferProtocol · read-write · current This attributes indicates the server protocol. | |||||||||||||
| StnSysLicenseInvUserId | 1.3.6.1.4.1.7483.2.1.1.2.26.4 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The userId used to access the License Inventory server. | |||||||||||||
| StnSysLicenseInvPassword | 1.3.6.1.4.1.7483.2.1.1.2.26.5 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The password used to access the License Inventory server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysLicenseInvFileUploadOper | 1.3.6.1.4.1.7483.2.1.1.2.26.6 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current To display the status of License Inventory. | |||||||||||||
| StnSysLicenseInvPathInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.26.7 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysLicenseInvPathInetAddress. | |||||||||||||
| StnSysLicenseInvPathInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.26.8 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the License Inv path. | |||||||||||||
| StnSysLicenseInvLastOperPercentCompleted | 1.3.6.1.4.1.7483.2.1.1.2.26.9 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The percent completion of the Last executed operation. | |||||||||||||
| StnSysLicenseInvLastUploadFileName | 1.3.6.1.4.1.7483.2.1.1.2.26.10 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current This attribute indicates the Last Upload filename for the License Inventory. | |||||||||||||
| StnSysLicenseInvFileLastUploadStatus | 1.3.6.1.4.1.7483.2.1.1.2.26.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current To display the status of License Inventory.
| |||||||||||||
| StnSysLicenseInvFileLastUploadTimeStamp | 1.3.6.1.4.1.7483.2.1.1.2.26.12 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The date and time when the License Inventory last upload was completed. | |||||||||||||
| NtnSysLinux | 1.3.6.1.4.1.7483.2.1.1.2.28 | ||||||||||||
| StnSysLinuxRootUserId | 1.3.6.1.4.1.7483.2.1.1.2.28.1 | SnmpAdminString (SIZE (0..50)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..50)) · read-only · current The Linux root user ID. | |||||||||||||
| StnSysLinuxRootUserPassword | 1.3.6.1.4.1.7483.2.1.1.2.28.2 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The Linux root user password. | |||||||||||||
| StnSysLinuxApplUserId | 1.3.6.1.4.1.7483.2.1.1.2.28.3 | SnmpAdminString (SIZE (0..50)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..50)) · read-only · current The Linux application user ID. | |||||||||||||
| StnSysLinuxApplUserPassword | 1.3.6.1.4.1.7483.2.1.1.2.28.4 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The Linux application user password. | |||||||||||||
| StnSysLinuxRootPasswordStatus | 1.3.6.1.4.1.7483.2.1.1.2.28.5 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current Password status for maint1 If password is changed, the value is true. If password is not set (default), the value is false. | |||||||||||||
| StnSysLinuxApplPasswordStatus | 1.3.6.1.4.1.7483.2.1.1.2.28.6 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current Password status for maint2 If password is changed, the value is true. If password is not set (default), the value is false. | |||||||||||||
| StnSysLinuxRootUserStatus | 1.3.6.1.4.1.7483.2.1.1.2.28.7 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Remote access enable for Maint1 User. | |||||||||||||
| StnSysLinuxApplUserStatus | 1.3.6.1.4.1.7483.2.1.1.2.28.8 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Remote access enable for Maint2 User. | |||||||||||||
| StnSysLinuxLoginInactivityTimeOut | 1.3.6.1.4.1.7483.2.1.1.2.28.9 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Inactivity timeout for Maint1 and Maint2 users. Current configurable range: 0 to 999.
| |||||||||||||
| StnSysLinuxSmsUserId | 1.3.6.1.4.1.7483.2.1.1.2.28.10 | SnmpAdminString (SIZE (0..50)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..50)) · read-only · current The System user ID. | |||||||||||||
| StnSysLinuxSmsUserPassword | 1.3.6.1.4.1.7483.2.1.1.2.28.11 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The System user password. | |||||||||||||
| StnSysLinuxSmsPasswordStatus | 1.3.6.1.4.1.7483.2.1.1.2.28.12 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current . | |||||||||||||
| StnSysLinuxSmsUserStatus | 1.3.6.1.4.1.7483.2.1.1.2.28.13 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysLinuxRootUserLocalStatus | 1.3.6.1.4.1.7483.2.1.1.2.28.14 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysLinuxSecurityCommit | 1.3.6.1.4.1.7483.2.1.1.2.28.15 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current . | |||||||||||||
| StnSysLinuxRootUserPort | 1.3.6.1.4.1.7483.2.1.1.2.28.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current .
| |||||||||||||
| NtnSysIpAclIpv6SysDefault | 1.3.6.1.4.1.7483.2.1.1.2.29 | ||||||||||||
| StnSysIpAclIpv6RxAction | 1.3.6.1.4.1.7483.2.1.1.2.29.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Default action to be taken on received (incoming) packets where ACL IPV6 is enabled but no pattern matches or no action is explicitly defined.
| |||||||||||||
| StnSysIpAclIpv6TxAction | 1.3.6.1.4.1.7483.2.1.1.2.29.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Default action to be taken on transmitted (outgoing) packets where ACL IPV6 is enabled but no pattern matches or no action is explicitly defined.
| |||||||||||||
| StnSysIpAclIpv6SnmpCfgEnable | 1.3.6.1.4.1.7483.2.1.1.2.29.3 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Indicates whether or not ACL IPV6 configuration is supported via SNMP. | |||||||||||||
| StnSysIpAclIpv6CfgRestoreToDefault | 1.3.6.1.4.1.7483.2.1.1.2.29.4 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current If setting to true, it will restore acl_ipv6 config to system default. | |||||||||||||
| StnSysIpAclIPv6ClearCounter | 1.3.6.1.4.1.7483.2.1.1.2.29.5 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Clear IPv6ACL counter to zero. | |||||||||||||
| NtnSysFileInitialization | 1.3.6.1.4.1.7483.2.1.1.2.30 | ||||||||||||
| StnSysFileInitializationRoot | 1.3.6.1.4.1.7483.2.1.1.2.30.1 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The path to the directory containing releases, relative to the TFTP server root directory. A forward slash will be prepended if it does not start with one. | |||||||||||||
| StnSysFileInitializationUserId | 1.3.6.1.4.1.7483.2.1.1.2.30.2 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The userId is used to access the RFS. | |||||||||||||
| StnSysFileInitializationPassword | 1.3.6.1.4.1.7483.2.1.1.2.30.3 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysFileInitializationFilename | 1.3.6.1.4.1.7483.2.1.1.2.30.4 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current This attribute indicates the filename for the file initialization. | |||||||||||||
| StnSysFileInitializationInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.30.5 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysFileInitializationInetAddress. | |||||||||||||
| StnSysFileInitializationInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.30.6 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address. | |||||||||||||
| NtnSysBtInterface | 1.3.6.1.4.1.7483.2.1.1.2.31 | ||||||||||||
| StnSysBtInterfaceDescription | 1.3.6.1.4.1.7483.2.1.1.2.31.1 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current BT Description. | |||||||||||||
| StnSysBtInterfaceIpAddr | 1.3.6.1.4.1.7483.2.1.1.2.31.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Set the IP address of the BT. | |||||||||||||
| StnSysBtInterfaceIpSubMask | 1.3.6.1.4.1.7483.2.1.1.2.31.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Subnet mask for BtIpSubMask. | |||||||||||||
| StnSysBtInterfaceAdminState | 1.3.6.1.4.1.7483.2.1.1.2.31.4 | TropicAdminStateType | RW | ||||||||||
scalar · TropicAdminStateType · read-write · current Administratively enable or disable the BT feature on the USB port. When enabled, the USB port will come up once a bluetooth dongle is plugged in. | |||||||||||||
| StnSysBtInterfaceLinkIntegrityStatus | 1.3.6.1.4.1.7483.2.1.1.2.31.5 | TropicOperationalStateType | RO | ||||||||||
scalar · TropicOperationalStateType · read-only · current BT link Integrity Status. | |||||||||||||
| StnSysBtInterfaceDHCPServer | 1.3.6.1.4.1.7483.2.1.1.2.31.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Dynamic Host Configuration Protocol on the BT port.
| |||||||||||||
| StnSysBtInterfaceDHCPRange | 1.3.6.1.4.1.7483.2.1.1.2.31.7 | Unsigned32 (1..10) | RW | ||||||||||
scalar · Unsigned32 (1..10) · read-write · current This is the range of the IP pool for the DHCP server. The port can dole out from 1 to up to 10 IP addresses, beginning with the BT port's IP address. This parameter is valid only when dhcp is enabled. For the BT port, the default value is 1, and thus the assigned IP address will be the next address after the BT port's address. For example, if the BT port is 172.16.2.1 (default value), then the assigned IP address for the attached device, i.e., smartphone, will be 172.16.2.2. Current configurable range: 1 to 10 | |||||||||||||
| StnSysBtInterfaceNodeSerialNum | 1.3.6.1.4.1.7483.2.1.1.2.31.8 | SnmpAdminString (SIZE (0..16)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..16)) · read-only · current BT serial number. | |||||||||||||
| StnSysBtInterfaceMacAddress | 1.3.6.1.4.1.7483.2.1.1.2.31.9 | MacAddress | RO | ||||||||||
scalar · MacAddress · read-only · current The value of tnSysBtInterfaceMacAddress specifies the mac address that is assigned to tnSysBtInterfaceMacAddress. | |||||||||||||
| NtnSysLicenseMgr | 1.3.6.1.4.1.7483.2.1.1.2.32 | ||||||||||||
| StnSysLicenseMgrKeepAliveTimer | 1.3.6.1.4.1.7483.2.1.1.2.32.1 | Unsigned32 (3600..86400) | RW | ||||||||||
scalar · Unsigned32 (3600..86400) · read-write · current the interval (in seconds) for the NE to send a keep-alive message to the license man-ager. The message will also automatically refresh the entitlements on the NE. | |||||||||||||
| StnSysLicenseMgrPrimaryServerIp | 1.3.6.1.4.1.7483.2.1.1.2.32.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Indicates the IPv4 address of the CLM server 1. | |||||||||||||
| StnSysLicenseMgrPrimaryServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.32.3 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysLicenseMgrPrimaryServerInetAddress. | |||||||||||||
| StnSysLicenseMgrPrimaryServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.32.4 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the CLM server 1. | |||||||||||||
| StnSysLicenseMgrSecondaryServerIp | 1.3.6.1.4.1.7483.2.1.1.2.32.5 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Indicates the IPv4 address of the CLM server 2. | |||||||||||||
| StnSysLicenseMgrSecondaryServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.32.6 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnSysLicenseMgrSecondaryServerInetAddress. | |||||||||||||
| StnSysLicenseMgrSecondaryServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.32.7 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the CLM server 2. | |||||||||||||
| StnSysLicenseMgrPrimaryServerStatus | 1.3.6.1.4.1.7483.2.1.1.2.32.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates the status of CLM Primary server.
| |||||||||||||
| StnSysLicenseMgrSecondaryServerStatus | 1.3.6.1.4.1.7483.2.1.1.2.32.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates the status of CLM Secondary server.
| |||||||||||||
| StnSysLicenseMgrExpiration | 1.3.6.1.4.1.7483.2.1.1.2.32.10 | SnmpAdminString (SIZE (0..64)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..64)) · read-only · current License Expiration date and time. | |||||||||||||
| StnSysLicenseMgrTimeOut | 1.3.6.1.4.1.7483.2.1.1.2.32.11 | Unsigned32 (1..1000) | RW | ||||||||||
scalar · Unsigned32 (1..1000) · read-write · current Timeout for the NE to wait for the response from CLM server. The failure is declared after the timeout is elapsed. | |||||||||||||
| StnSysLicenseMgrRetries | 1.3.6.1.4.1.7483.2.1.1.2.32.12 | Unsigned32 (0..100) | RW | ||||||||||
scalar · Unsigned32 (0..100) · read-write · current Specifies the number of attempts that the NE will try to contact the specified CLM server that has failed to respond during the previous request. If there is no response from the CLM server after the specified tries then the NE will try to contact the second CLM server if one is provisioned. | |||||||||||||
| StnSysLicenseMgrLastRefresh | 1.3.6.1.4.1.7483.2.1.1.2.32.13 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current License Last Refresh date and time. | |||||||||||||
| StnSysLicenseMgrCertStatus | 1.3.6.1.4.1.7483.2.1.1.2.32.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the CLM Certificate Status.
| |||||||||||||
| StnSysLicenseMgrNextRefreshTime | 1.3.6.1.4.1.7483.2.1.1.2.32.15 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Time remaining for next refresh in seconds. | |||||||||||||
| NtnLicenseObjs | 1.3.6.1.4.1.7483.2.1.1.2.33 | ||||||||||||
| TtnLicenseEntityTable | 1.3.6.1.4.1.7483.2.1.1.2.33.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnLicenseEntityEntry | 1.3.6.1.4.1.7483.2.1.1.2.33.1.1 | NA | |||||||||||
| CtnLicenseEntity | 1.3.6.1.4.1.7483.2.1.1.2.33.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current . | |||||||||||||
| CtnLicenseEntityRefreshSet | 1.3.6.1.4.1.7483.2.1.1.2.33.1.1.2 | TnCommand | RC | ||||||||||
column · TnCommand · read-create · current . | |||||||||||||
| CtnLicenseEntityNumberInUse | 1.3.6.1.4.1.7483.2.1.1.2.33.1.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number in Use. | |||||||||||||
| CtnLicenseEntityNumberExceedAvail | 1.3.6.1.4.1.7483.2.1.1.2.33.1.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number Exceeding available. | |||||||||||||
| CtnLicenseEntityEntitlementNeeded | 1.3.6.1.4.1.7483.2.1.1.2.33.1.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Entitlement needed by NE. | |||||||||||||
| TtnLicenseEntitlementTable | 1.3.6.1.4.1.7483.2.1.1.2.33.2 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnLicenseEntitlementEntry | 1.3.6.1.4.1.7483.2.1.1.2.33.2.1 | NA | |||||||||||
| CtnLicenseEntitlementCategoryID | 1.3.6.1.4.1.7483.2.1.1.2.33.2.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current . | |||||||||||||
| CtnLicenseEntitlementEntries | 1.3.6.1.4.1.7483.2.1.1.2.33.2.1.2 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current . | |||||||||||||
| CtnLicenseEntitlementDetails | 1.3.6.1.4.1.7483.2.1.1.2.33.2.1.3 | SnmpAdminString (SIZE (0..2047)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..2047)) · read-only · current The format will be cardName_LineRate_RequestedCount_MissingCount. | |||||||||||||
| NtnSysKeyStore | 1.3.6.1.4.1.7483.2.1.1.2.34 | ||||||||||||
| TtnSysKeyStoreServiceTable | 1.3.6.1.4.1.7483.2.1.1.2.34.1 | NA | |||||||||||
table · not-accessible · current KeyStore Service Management. | |||||||||||||
| RtnSysKeyStoreServiceEntry | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1 | NA | |||||||||||
| CtnSysKeyStoreNameIndex | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current KeyStore name.
| |||||||||||||
| CtnSysKeyStoreTypeIndex | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current KeyStore type.
| |||||||||||||
| CtnSysKeyStoreTransServerCommand | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current noCmd - No operation
upload - Upload file to remote server
download - Only download, not install.
install - Install the former downloaded
restoreToDefault - Clear former intalled and install
- to default
downloadThenInstall - Download then auto-install
clear - Removes all items installed.
| |||||||||||||
| CtnSysKeyStoreTransServerProtocol | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current KeyStore transfer server protocol: invalid - Not configed yet https - Use https protocol sftp - Use sftp protocol.
| |||||||||||||
| CtnSysKeyStoreTransServerHost | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.5 | SnmpAdminString (SIZE (0..255)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-create · current Domain or ip address of URI. https used only. | |||||||||||||
| CtnSysKeyStoreTransServerPort | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.6 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current Port of URI. https used only. | |||||||||||||
| CtnSysKeyStoreTransServerLocation | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.7 | SnmpAdminString (SIZE (0..255)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-create · current For https: location of URI; for others: path on server. | |||||||||||||
| CtnSysKeyStoreTransServerUserId | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.8 | SnmpAdminString (SIZE (0..32)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-create · current Username for authentication. | |||||||||||||
| CtnSysKeyStoreTransServerPassword | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.9 | SnmpAdminString (SIZE (0..256)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..256)) · read-create · current Password for authentication. | |||||||||||||
| CtnSysKeyStoreTransServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.10 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current . | |||||||||||||
| CtnSysKeyStoreTransServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.11 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current . | |||||||||||||
| CtnSysKeyStoreServiceStatus | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Last operation status: none - No command installed - Installed successfully downloaded - Downloaded successfully in-progress - Processing and need to wait transferfail - File transfer fail formaterror - File format error.
| |||||||||||||
| CtnSysKeyStoreServerLastTransferTime | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.13 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current The last transfer (download/upload) time. | |||||||||||||
| CtnSysKeyStoreTransServerURI | 1.3.6.1.4.1.7483.2.1.1.2.34.1.1.14 | SnmpAdminString (SIZE (0..511)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..511)) · read-create · current URI. | |||||||||||||
| TtnSysKeyStoreCertInfoTable | 1.3.6.1.4.1.7483.2.1.1.2.34.2 | NA | |||||||||||
table · not-accessible · current KeyStore Certificate Information. | |||||||||||||
| RtnSysKeyStoreCertInfoEntry | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1 | NA | |||||||||||
| CtnSysKeyStoreCertRepositoryIndex | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current KeyStore certificate repository.
| |||||||||||||
| CtnSysKeyStoreCertIndex | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.2 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current . | |||||||||||||
| CtnSysKeyStoreCertVersion | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.3 | SnmpAdminString (SIZE (0..31)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..31)) · read-only · current Certificate version. | |||||||||||||
| CtnSysKeyStoreCertSerialNumber | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.4 | SnmpAdminString (SIZE (0..63)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..63)) · read-only · current Certificate serial number. | |||||||||||||
| CtnSysKeyStoreCertSignatureAlgorithm | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.5 | SnmpAdminString (SIZE (0..63)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..63)) · read-only · current Certificate signature algorithm. | |||||||||||||
| CtnSysKeyStoreCertIssuer | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.6 | SnmpAdminString (SIZE (0..511)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..511)) · read-only · current Certificate issuer. | |||||||||||||
| CtnSysKeyStoreCertValidity | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.7 | SnmpAdminString (SIZE (0..255)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-only · current Certificate validity. | |||||||||||||
| CtnSysKeyStoreCertSubject | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.8 | SnmpAdminString (SIZE (0..511)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..511)) · read-only · current Certificate subject. | |||||||||||||
| CtnSysKeyStoreCertSubjectPublicKeyInfo | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.9 | SnmpAdminString (SIZE (0..63)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..63)) · read-only · current Certificate subject publicKey info. | |||||||||||||
| CtnSysKeyStoreCertKeyUsage | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.10 | SnmpAdminString (SIZE (0..127)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..127)) · read-only · current Certificate key usage. | |||||||||||||
| CtnSysKeyStoreCertSubjectAlternativeName | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.11 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current Certificate subject alternative name. | |||||||||||||
| CtnSysKeyStoreCertExtendedKeyUsage | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.12 | SnmpAdminString (SIZE (0..127)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..127)) · read-only · current Certificate extended key usage. | |||||||||||||
| CtnSysKeyStoreCertBasicConstraints | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.13 | SnmpAdminString (SIZE (0..127)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..127)) · read-only · current Certificate basic constraints. | |||||||||||||
| CtnSysKeyStoreCertSHA256Fingerprint | 1.3.6.1.4.1.7483.2.1.1.2.34.2.1.14 | SnmpAdminString (SIZE (0..127)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..127)) · read-only · current Certificate SHA256 Fingerprint. | |||||||||||||
| NtnSysBgp | 1.3.6.1.4.1.7483.2.1.1.2.35 | ||||||||||||
| TtnSysBgpPeerTable | 1.3.6.1.4.1.7483.2.1.1.2.35.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysBgpPeerEntry | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1 | NA | |||||||||||
| CtnSysBgpPeerIndex | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current . | |||||||||||||
| CtnSysBgpPeerRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current . | |||||||||||||
| CtnSysBgpPeerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.3 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnSysBgpPeerInetAddress. | |||||||||||||
| CtnSysBgpPeerIp | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.4 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current IP address. | |||||||||||||
| CtnSysBgpPeerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.5 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address. | |||||||||||||
| CtnSysBgpPeerRemoteASN | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.6 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current . | |||||||||||||
| CtnSysBgpPeerSecurityKey | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.7 | SnmpAdminString (SIZE (0..80)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..80)) · read-create · current . | |||||||||||||
| CtnSysBgpPeerRouterId | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.8 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current IP address. | |||||||||||||
| CtnSysBgpPeerStatus | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current .
| |||||||||||||
| CtnSysBgpMaxPrefixIpv4Limit | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.10 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current . | |||||||||||||
| CtnSysBgpMaxPrefixIpv4Threshold | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.11 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current . | |||||||||||||
| CtnSysBgpMaxPrefixIpv4Action | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.12 | NokiaSysBgpMaxPrefixAction | RC | ||||||||||
column · NokiaSysBgpMaxPrefixAction · read-create · current . | |||||||||||||
| CtnSysBgpMaxPrefixIpv6Limit | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.13 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current . | |||||||||||||
| CtnSysBgpMaxPrefixIpv6Threshold | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.14 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current . | |||||||||||||
| CtnSysBgpMaxPrefixIpv6Action | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.15 | NokiaSysBgpMaxPrefixAction | RC | ||||||||||
column · NokiaSysBgpMaxPrefixAction · read-create · current . | |||||||||||||
| CtnSysBgpStatsIpv4PrefixInCount | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.16 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current . | |||||||||||||
| CtnSysBgpStatsIpv6PrefixInCount | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.17 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current . | |||||||||||||
| CtnSysBgpStatsIpv4PrefixOutCount | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.18 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current . | |||||||||||||
| CtnSysBgpStatsIpv6PrefixOutCount | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.19 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current . | |||||||||||||
| CtnSysBgpPeerStatsInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.20 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnSysBgpPeerStatsInetAddress. | |||||||||||||
| CtnSysBgpPeerStatsIp | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.21 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current IP address. | |||||||||||||
| CtnSysBgpPeerStatsInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.35.1.1.22 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address. | |||||||||||||
| NtnSysDiscoverMe | 1.3.6.1.4.1.7483.2.1.1.2.36 | ||||||||||||
| StnSysDiscoverMeTraps | 1.3.6.1.4.1.7483.2.1.1.2.36.1 | TmnxEnabledDisabled | RW | ||||||||||
scalar · TmnxEnabledDisabled · read-write · current Enable or disable the sending of 'discover me' traps by the system. | |||||||||||||
| NtnSyslogServer | 1.3.6.1.4.1.7483.2.1.1.2.37 | ||||||||||||
| TtnSyslogServerTable | 1.3.6.1.4.1.7483.2.1.1.2.37.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSyslogServerEntry | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1 | NA | |||||||||||
| CtnSyslogServerIndex | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current . | |||||||||||||
| CtnSyslogServerIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current . | |||||||||||||
| CtnSyslogServerPort | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.3 | Unsigned32 (1..65535) | RC | ||||||||||
column · Unsigned32 (1..65535) · read-create · current . | |||||||||||||
| CtnSyslogServerFacility | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current .
| |||||||||||||
| CtnSyslogServerPriority | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current .
| |||||||||||||
| CtnSyslogServerEnabled | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.6 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current . | |||||||||||||
| CtnSyslogServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.7 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address of the Syslog Server. | |||||||||||||
| CtnSyslogServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.8 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnSyslogServerInetAddress. | |||||||||||||
| CtnSyslogServerProtocol | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Syslog Transmission Protocol.
| |||||||||||||
| CtnSyslogServerType | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.10 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Syslog Server Type.
| |||||||||||||
| CtnSyslogServerDomain | 1.3.6.1.4.1.7483.2.1.1.2.37.1.1.11 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Syslog Server Domain. | |||||||||||||
| NtnPctObjs | 1.3.6.1.4.1.7483.2.1.1.2.38 | ||||||||||||
| StnPctVerificationPeriod | 1.3.6.1.4.1.7483.2.1.1.2.38.1 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnPctVerificationLossThreshold | 1.3.6.1.4.1.7483.2.1.1.2.38.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Verification Port to Port loss Threshold. Current configurable range:100 to 500 mB in steps of 10. -100 indicates that the threshold is not configured.
| |||||||||||||
| StnPctVerificationOffset | 1.3.6.1.4.1.7483.2.1.1.2.38.3 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current . | |||||||||||||
| StnPctVerificationStatus | 1.3.6.1.4.1.7483.2.1.1.2.38.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current .
| |||||||||||||
| NtnKeyObjs | 1.3.6.1.4.1.7483.2.1.1.2.39 | ||||||||||||
| TtnHostKeyTable | 1.3.6.1.4.1.7483.2.1.1.2.39.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnHostKeyEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.1.1 | NA | |||||||||||
| CtnHostKeyModuleID | 1.3.6.1.4.1.7483.2.1.1.2.39.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Host key string module ID. | |||||||||||||
| CtnHostKeyIndex | 1.3.6.1.4.1.7483.2.1.1.2.39.1.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Host key string key index. | |||||||||||||
| CtnHostKeyString1 | 1.3.6.1.4.1.7483.2.1.1.2.39.1.1.3 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current Host key string 1. | |||||||||||||
| CtnHostKeyString2 | 1.3.6.1.4.1.7483.2.1.1.2.39.1.1.4 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current Host key string 2. | |||||||||||||
| TtnSshPrivKeyTable | 1.3.6.1.4.1.7483.2.1.1.2.39.2 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshPrivKeyEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.2.1 | NA | |||||||||||
| CtnSshPrivKeyModuleID | 1.3.6.1.4.1.7483.2.1.1.2.39.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Ssh Private key string module ID. | |||||||||||||
| CtnSshPrivKeyString1 | 1.3.6.1.4.1.7483.2.1.1.2.39.2.1.2 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current Ssh Private key string 1. | |||||||||||||
| CtnSshPrivKeyString2 | 1.3.6.1.4.1.7483.2.1.1.2.39.2.1.3 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current Ssh Private key string 2. | |||||||||||||
| CtnSshPrivKeyPassword | 1.3.6.1.4.1.7483.2.1.1.2.39.2.1.4 | SnmpAdminString (SIZE (0..128)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..128)) · read-create · current Ssh Private key password. | |||||||||||||
| TtnSysNESshKeyTable | 1.3.6.1.4.1.7483.2.1.1.2.39.3 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysNESshKeyEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.3.1 | NA | |||||||||||
| CtnSysNESshKeyUserName | 1.3.6.1.4.1.7483.2.1.1.2.39.3.1.1 | SnmpAdminString (SIZE (1..64)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..64)) · not-accessible · current . | |||||||||||||
| CtnSysNESshKeyIndex | 1.3.6.1.4.1.7483.2.1.1.2.39.3.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current . | |||||||||||||
| CtnSysNESshKeyRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.39.3.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status. | |||||||||||||
| CtnSysNESshKeyString1 | 1.3.6.1.4.1.7483.2.1.1.2.39.3.1.4 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current The SSH key string 1. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices. | |||||||||||||
| CtnSysNESshKeyString2 | 1.3.6.1.4.1.7483.2.1.1.2.39.3.1.5 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current The SSH key string 2. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices. | |||||||||||||
| TtnNESshKeyTable | 1.3.6.1.4.1.7483.2.1.1.2.39.4 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnNESshKeyEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.4.1 | NA | |||||||||||
| CtnNESshKeyUserName | 1.3.6.1.4.1.7483.2.1.1.2.39.4.1.1 | SnmpAdminString (SIZE (1..64)) | NA | ||||||||||
column · SnmpAdminString (SIZE (1..64)) · not-accessible · current . | |||||||||||||
| CtnNESshKeyIndex | 1.3.6.1.4.1.7483.2.1.1.2.39.4.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current . | |||||||||||||
| CtnNESshKeyRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.39.4.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status. | |||||||||||||
| CtnNESshKeyString1 | 1.3.6.1.4.1.7483.2.1.1.2.39.4.1.4 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current The SSH key string 1. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices. | |||||||||||||
| CtnNESshKeyString2 | 1.3.6.1.4.1.7483.2.1.1.2.39.4.1.5 | SnmpAdminString (SIZE (0..2048)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..2048)) · read-create · current The SSH key string 2. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices. | |||||||||||||
| TtnSshCiphersTable | 1.3.6.1.4.1.7483.2.1.1.2.39.5 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshCiphersEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.5.1 | NA | |||||||||||
| CtnSshCiphersAlgType | 1.3.6.1.4.1.7483.2.1.1.2.39.5.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This attribute indicates the SSH Ciphers Algorithm type Supported values: aes128-ctr - 1 aes256-ctr - 2 [email protected] - 3 [email protected] - 4. | |||||||||||||
| CtnSshCiphersProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.5.1.2 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current This attribute indicates the SSH Ciphers ProfileName. | |||||||||||||
| CtnSshCiphersEnabled | 1.3.6.1.4.1.7483.2.1.1.2.39.5.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current This attribute indicates whether the SSH Ciphers algorithm setting is enabled/disabled. | |||||||||||||
| TtnSshHostKeyTable | 1.3.6.1.4.1.7483.2.1.1.2.39.6 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshHostKeyEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.6.1 | NA | |||||||||||
| CtnSshHostKeyAlgType | 1.3.6.1.4.1.7483.2.1.1.2.39.6.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This attribute indicates the SSH HostKey Algorithm type Supported values: ssh-rsa - 1 rsa-sha2-256 - 2 rsa-sha2-512 - 3 ecdsa-sha2-nistp256 - 4 ecdsa-sha2-nistp384 - 5 ecdsa-sha2-nistp521 - 6 ssh-ed25519 - 7. | |||||||||||||
| CtnSshHostKeyProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.6.1.2 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current This attribute indicates the SSH HostKey Profilename. | |||||||||||||
| CtnSshHostKeyEnabled | 1.3.6.1.4.1.7483.2.1.1.2.39.6.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current This attribute indicates whether the SSH HostKey algorithm setting is enabled/disabled. | |||||||||||||
| TtnSshMacsTable | 1.3.6.1.4.1.7483.2.1.1.2.39.7 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshMacsEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.7.1 | NA | |||||||||||
| CtnSshMacsAlgType | 1.3.6.1.4.1.7483.2.1.1.2.39.7.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This attribute indicates the SSH Macs Algorithm type Supported values: hmac-sha1 - 1 hmac-sha2-256 - 2 hmac-sha2-512 - 3. | |||||||||||||
| CtnSshMacsProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.7.1.2 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current This attribute indicates the SSH Macs Profilename. | |||||||||||||
| CtnSshMacsEnabled | 1.3.6.1.4.1.7483.2.1.1.2.39.7.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current This attribute indicates whether the SSH Macs algorithm setting is enabled/disabled. | |||||||||||||
| TtnSshKexTable | 1.3.6.1.4.1.7483.2.1.1.2.39.8 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshKexEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.8.1 | NA | |||||||||||
| CtnSshKexAlgType | 1.3.6.1.4.1.7483.2.1.1.2.39.8.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This attribute indicates the SSH Kex Algorithm type Supported values: diffie-hellman-group14-sha1 - 1 diffie-hellman-group14-sha256 - 2 diffie-hellman-group16-sha512 - 3 diffie-hellman-group18-sha512 - 4 ecdh-sha2-nistp256 - 5 ecdh-sha2-nistp384 - 6 ecdh-sha2-nistp521 - 7 curve25519-sha256 - 8 curve25519_sha256_libssh - 9. | |||||||||||||
| CtnSshKexProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.8.1.2 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current This attribute indicates the SSH Kex Profile name. | |||||||||||||
| CtnSshKexEnabled | 1.3.6.1.4.1.7483.2.1.1.2.39.8.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current This attribute indicates whether the SSH Kex algorithm setting is enabled/disabled. | |||||||||||||
| TtnSshPubKeyTable | 1.3.6.1.4.1.7483.2.1.1.2.39.9 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshPubKeyEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.9.1 | NA | |||||||||||
| CtnSshPubKeyAlgType | 1.3.6.1.4.1.7483.2.1.1.2.39.9.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This attribute indicates the SSH PubKey Algorithm type Supported values: ssh-rsa - 1 rsa-sha2-256 - 2 rsa-sha2-512 - 3 ecdsa-sha2-nistp256 - 4 ecdsa-sha2-nistp384 - 5 ecdsa-sha2-nistp521 - 6. | |||||||||||||
| CtnSshPubKeyProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.9.1.2 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current This attribute indicates the SSH PubKey Profile name. | |||||||||||||
| CtnSshPubKeyEnabled | 1.3.6.1.4.1.7483.2.1.1.2.39.9.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current This attribute indicates whether the SSH PubKey algorithm setting is enabled/disabled. | |||||||||||||
| TtnTlsProfileTable | 1.3.6.1.4.1.7483.2.1.1.2.39.10 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnTlsProfileEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.10.1 | NA | |||||||||||
| CtnTlsProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.10.1.1 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current This attribute indicates the TLS ProfileName and specifies an TLS profile which will be applied to TLS clients and servers or applications which uses this profile or have this profile assigned respectively. | |||||||||||||
| CtnTlsProfileMinVersion | 1.3.6.1.4.1.7483.2.1.1.2.39.10.1.2 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Configures the minimum TLS version supported by the TLS clients and servers. The version specified must be lower or equal to the maximum supported version. | |||||||||||||
| CtnTlsProfileMaxVersion | 1.3.6.1.4.1.7483.2.1.1.2.39.10.1.3 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Configures the maximum TLS version supported by the TLS clients and servers. The version specified must be higher or equal to the minimum supported version. | |||||||||||||
| CtnTlsProfileMutualAuth | 1.3.6.1.4.1.7483.2.1.1.2.39.10.1.4 | AluWdmEnabledDisabled | RC | ||||||||||
column · AluWdmEnabledDisabled · read-create · current Enables or Disables the mutual authentication If mutual authentication is enabled, a client certificate will be requested by an TLS server. A client of server implementation verifies the received certificates and its revocation status. If the verification fail, then a TLS connection will be cancelled. | |||||||||||||
| CtnTlsProfileDescription | 1.3.6.1.4.1.7483.2.1.1.2.39.10.1.5 | SnmpAdminString (SIZE (0..64)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-create · current . | |||||||||||||
| TtnSanListTable | 1.3.6.1.4.1.7483.2.1.1.2.39.11 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSanListEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.11.1 | NA | |||||||||||
| CtnSanListName | 1.3.6.1.4.1.7483.2.1.1.2.39.11.1.1 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current . | |||||||||||||
| CtnSanListType | 1.3.6.1.4.1.7483.2.1.1.2.39.11.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current .
| |||||||||||||
| CtnSanListIndex | 1.3.6.1.4.1.7483.2.1.1.2.39.11.1.3 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current . | |||||||||||||
| CtnSanListRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.39.11.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status. | |||||||||||||
| TtnCsrSanListTable | 1.3.6.1.4.1.7483.2.1.1.2.39.12 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnCsrSanListEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.12.1 | NA | |||||||||||
| CtnCsrSanListType | 1.3.6.1.4.1.7483.2.1.1.2.39.12.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current .
| |||||||||||||
| CtnCsrSanListIndex | 1.3.6.1.4.1.7483.2.1.1.2.39.12.1.2 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current . | |||||||||||||
| CtnCsrSanListRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.39.12.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status. | |||||||||||||
| TtnSanListAuthTable | 1.3.6.1.4.1.7483.2.1.1.2.39.13 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSanListAuthEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.13.1 | NA | |||||||||||
| CtnSanListAuthentication | 1.3.6.1.4.1.7483.2.1.1.2.39.13.1.1 | AluWdmEnabledDisabled | RC | ||||||||||
column · AluWdmEnabledDisabled · read-create · current . | |||||||||||||
| CtnSanListProfileDescription | 1.3.6.1.4.1.7483.2.1.1.2.39.13.1.2 | SnmpAdminString (SIZE (0..64)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-create · current . | |||||||||||||
| TtnOcspProfileTable | 1.3.6.1.4.1.7483.2.1.1.2.39.14 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnOcspProfileEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.14.1 | NA | |||||||||||
| CtnOcspProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.14.1.1 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current . | |||||||||||||
| CtnOcspProfileRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.39.14.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status. | |||||||||||||
| CtnOcspProfileRetry | 1.3.6.1.4.1.7483.2.1.1.2.39.14.1.3 | Unsigned32 (1..10) | RC | ||||||||||
column · Unsigned32 (1..10) · read-create · current Number of entries if an OCSP responder does not respond. | |||||||||||||
| CtnOcspProfileServerUrl | 1.3.6.1.4.1.7483.2.1.1.2.39.14.1.4 | SnmpAdminString (SIZE (0..255)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-create · current URL of the OCSP responder. | |||||||||||||
| CtnOcspProfileStatus | 1.3.6.1.4.1.7483.2.1.1.2.39.14.1.5 | AluWdmEnabledDisabled | RC | ||||||||||
column · AluWdmEnabledDisabled · read-create · current Enables or disables the X.509v3 certificate revocation using the specified OCSP responder. If the service is disabled, then the revocation check will be not done. | |||||||||||||
| CtnOcspProfileTimeout | 1.3.6.1.4.1.7483.2.1.1.2.39.14.1.6 | Unsigned32 (1..3600) | RC | ||||||||||
column · Unsigned32 (1..3600) · read-create · current Timeout for OCSP responses. | |||||||||||||
| TtnSshProfileTable | 1.3.6.1.4.1.7483.2.1.1.2.39.15 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSshProfileEntry | 1.3.6.1.4.1.7483.2.1.1.2.39.15.1 | NA | |||||||||||
| CtnSshProfileName | 1.3.6.1.4.1.7483.2.1.1.2.39.15.1.1 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current . | |||||||||||||
| CtnSshProfileDescription | 1.3.6.1.4.1.7483.2.1.1.2.39.15.1.2 | SnmpAdminString (SIZE (0..64)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-create · current . | |||||||||||||
| NtnTransferSysLog | 1.3.6.1.4.1.7483.2.1.1.2.40 | ||||||||||||
| StnTransferSysLogCommand | 1.3.6.1.4.1.7483.2.1.1.2.40.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This attribute indicates the transfer log Command.
| |||||||||||||
| StnTransferSysLogRemoteHostIp | 1.3.6.1.4.1.7483.2.1.1.2.40.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current This attribute indicates the transfer log Remote Host Ip. | |||||||||||||
| StnTransferSysLogRemoteHostInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.40.3 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The value specifies the type of Internet address stored in tnTransferSysLogRemoteHostInetAddress. | |||||||||||||
| StnTransferSysLogRemoteHostInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.40.4 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Indicates the IPv6 address of the log server. | |||||||||||||
| StnTransferSysLogPort | 1.3.6.1.4.1.7483.2.1.1.2.40.5 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current This attributes indicates the transfer Syslog port. | |||||||||||||
| StnTransferSysLogProtocol | 1.3.6.1.4.1.7483.2.1.1.2.40.6 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current This attributes indicates the transfer Syslog protocol. | |||||||||||||
| StnTransferSysLogUserId | 1.3.6.1.4.1.7483.2.1.1.2.40.7 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..32)) · read-write · current The userId used to access the RFS. | |||||||||||||
| StnTransferSysLogPassword | 1.3.6.1.4.1.7483.2.1.1.2.40.8 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current The password used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnTransferSysLogRemotePath | 1.3.6.1.4.1.7483.2.1.1.2.40.9 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current This attribute indicates the transfer Log Remote Path. | |||||||||||||
| StnTransferSysLogPeriod | 1.3.6.1.4.1.7483.2.1.1.2.40.10 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current This attribute indicates the transfer Log Period. | |||||||||||||
| StnTransferSysLogLastFileTransfer | 1.3.6.1.4.1.7483.2.1.1.2.40.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This attribute indicates the recent file transfer.
| |||||||||||||
| StnTransferSysLogEnable | 1.3.6.1.4.1.7483.2.1.1.2.40.12 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current This attribute indicates whether the transfer Log is enabled/disabled. | |||||||||||||
| NtnSysHealthCare | 1.3.6.1.4.1.7483.2.1.1.2.41 | ||||||||||||
| StnSysHealthCareCheckCommand | 1.3.6.1.4.1.7483.2.1.1.2.41.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Healthcare check command.
| |||||||||||||
| StnSysHealthCareCheckShelfNum | 1.3.6.1.4.1.7483.2.1.1.2.41.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current ShelfNum where the healthcare check has to be initiated. | |||||||||||||
| StnSysHealthCareCheckSlotNum | 1.3.6.1.4.1.7483.2.1.1.2.41.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current SlotNum where the healthcare check has to be initiated. | |||||||||||||
| StnSysHealthCareCheckPercentCompleted | 1.3.6.1.4.1.7483.2.1.1.2.41.4 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The percent complete of the previously executed tnSysHealthCareCheckCommand operation. | |||||||||||||
| StnSysHealthCareCheckStatus | 1.3.6.1.4.1.7483.2.1.1.2.41.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the status of the previously executed tnSysHealthCareCheckCommand operation.
| |||||||||||||
| StnSysHealthCareCheckResult | 1.3.6.1.4.1.7483.2.1.1.2.41.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates the result of the previously executed tnSysHealthCareCheckCommand operation.
| |||||||||||||
| StnSysHealthCareCheckScratchDir | 1.3.6.1.4.1.7483.2.1.1.2.41.7 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..512)) · read-only · current Contains the file's size in KB, its access date and the filename as 3 attributes per output line format similar to output from ls -ogth. | |||||||||||||
| StnSysHealthCareServerIp | 1.3.6.1.4.1.7483.2.1.1.2.41.8 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Healthcare remote file server IP address. | |||||||||||||
| StnSysHealthCareServerProtocol | 1.3.6.1.4.1.7483.2.1.1.2.41.9 | AluWdmNewTransferProtocol | RW | ||||||||||
scalar · AluWdmNewTransferProtocol · read-write · current Indicates the healthcare server protocol. | |||||||||||||
| StnSysHealthCareServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.41.10 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current Specifies the type of Healthcare address stored in tnSysHealthCareServerInetAddress. | |||||||||||||
| StnSysHealthCareServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.41.11 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Healthcare remote file server IPv6 address. | |||||||||||||
| StnSysHealthCareServerPort | 1.3.6.1.4.1.7483.2.1.1.2.41.12 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current Indicates the Heathcare server port. | |||||||||||||
| StnSysHealthCareServerUserId | 1.3.6.1.4.1.7483.2.1.1.2.41.13 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The userId used to access the Healthcare server. | |||||||||||||
| StnSysHealthCareServerPassword | 1.3.6.1.4.1.7483.2.1.1.2.41.14 | SnmpAdminString (SIZE (0..128)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..128)) · read-write · current The password used to access the Healthcare server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| StnSysHealthCareServerLocation | 1.3.6.1.4.1.7483.2.1.1.2.41.15 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current For https: location of URI; for others: path on the Healthcare server. | |||||||||||||
| StnSysHealthCareTransferCommand | 1.3.6.1.4.1.7483.2.1.1.2.41.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Healthcare transfer command.
| |||||||||||||
| StnSysHealthCareTransferPercentCompleted | 1.3.6.1.4.1.7483.2.1.1.2.41.17 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The percent completion of the previously executed transfer operation. | |||||||||||||
| StnSysHealthCareTransferStatus | 1.3.6.1.4.1.7483.2.1.1.2.41.18 | AluWdmTransferStatus | RO | ||||||||||
scalar · AluWdmTransferStatus · read-only · current Indicates the status of the previously executed tnSysHealthCareTransferCommand operation. | |||||||||||||
| StnSysHealthCareTransferLastFile | 1.3.6.1.4.1.7483.2.1.1.2.41.19 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Indicates the filename for the last Healthcare check result file transfer. | |||||||||||||
| StnSysHealthCareLastOperation | 1.3.6.1.4.1.7483.2.1.1.2.41.20 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Healthcare last operation.
| |||||||||||||
| StnSysHealthCareSetCriteriaTcId | 1.3.6.1.4.1.7483.2.1.1.2.41.21 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Sets Criteria TcId in string format. | |||||||||||||
| StnSysHealthCareSetCriteria | 1.3.6.1.4.1.7483.2.1.1.2.41.22 | SnmpAdminString (SIZE (0..2048)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..2048)) · read-write · current Sets one test case criteria in JSONL format. | |||||||||||||
| StnSysHealthCareDeleteCriteriaTcId | 1.3.6.1.4.1.7483.2.1.1.2.41.23 | SnmpAdminString (SIZE (0..255)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..255)) · read-write · current Deletes Criteria TcId in string format. | |||||||||||||
| StnSysHealthCareDeleteCriteria | 1.3.6.1.4.1.7483.2.1.1.2.41.24 | SnmpAdminString (SIZE (0..2048)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..2048)) · read-write · current Deletes one test case criteria in JSONL format. | |||||||||||||
| StnSysHealthCareApplyCriteriaCommand | 1.3.6.1.4.1.7483.2.1.1.2.41.25 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to apply the preset or default criteria of all test cases.
| |||||||||||||
| NtnSysTrapThrottling | 1.3.6.1.4.1.7483.2.1.1.2.42 | ||||||||||||
| StnSysTrapThrottlingStatus | 1.3.6.1.4.1.7483.2.1.1.2.42.1 | AluWdmDisabledEnabled | RW | ||||||||||
scalar · AluWdmDisabledEnabled · read-write · current Disables or enables the trap throttling related parameters on the network element. | |||||||||||||
| StnSysTrapThrottlingThreshold1 | 1.3.6.1.4.1.7483.2.1.1.2.42.2 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Configures the maximum number of category1 traps that can be processed as part of the trap-throttling functionality (if enabled) on the network element. Current Range: 1 to 150. | |||||||||||||
| StnSysTrapThrottlingThreshold2 | 1.3.6.1.4.1.7483.2.1.1.2.42.3 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Configures the maximum number of category2 traps that can be processed as part of the trap-throttling functionality (if enabled) on the network element. Current Range: 1 to 150. | |||||||||||||
| StnSysTrapThrottlingThreshold3 | 1.3.6.1.4.1.7483.2.1.1.2.42.4 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Configures the maximum number of category3 traps that can be processed as part of the trap-throttling functionality (if enabled) on the network element. Current Range: 1 to 150. | |||||||||||||
| StnSysTrapThrottlingTimeOverThreshold | 1.3.6.1.4.1.7483.2.1.1.2.42.5 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Configures the number of consecutive seconds for which traps are above the threshold (sum of the set threshold1, threshold2, and threshold3 values), after which the network element enters the trap throttling state. Current Range: 1 to 600.
| |||||||||||||
| StnSysTrapThrottlingTimeUnderThreshold | 1.3.6.1.4.1.7483.2.1.1.2.42.6 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Configures the number of consecutive seconds for which traps are below the threshold (sum of the set threshold1, threshold2, and threshold3 values), after which the trap throttling state is exited on the network element. Current Range: 1 to 600.
| |||||||||||||
| StnSysTrapThrottlingState | 1.3.6.1.4.1.7483.2.1.1.2.42.7 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current Indicates if the network element is in trap throttling state. | |||||||||||||
| NtnSysNmsObjs | 1.3.6.1.4.1.7483.2.1.1.2.43 | ||||||||||||
| TtnSysNmsIpListTable | 1.3.6.1.4.1.7483.2.1.1.2.43.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysNmsIpListEntry | 1.3.6.1.4.1.7483.2.1.1.2.43.1.1 | NA | |||||||||||
| CtnSysNmsIpListIndex | 1.3.6.1.4.1.7483.2.1.1.2.43.1.1.1 | OCTET STRING | NA | ||||||||||
column · OCTET STRING · not-accessible · current . | |||||||||||||
| CtnSysNmsIpListRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.43.1.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status. | |||||||||||||
| CtnSysNmsIpListIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.43.1.1.3 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current . | |||||||||||||
| CtnSysNmsIpListInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.43.1.1.4 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address of the Syslog Server. | |||||||||||||
| CtnSysNmsIpListInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.43.1.1.5 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnSysNmsIpListInetAddress. | |||||||||||||
| NtnSysDnsServer | 1.3.6.1.4.1.7483.2.1.1.2.44 | ||||||||||||
| TtnSysDnsServerTable | 1.3.6.1.4.1.7483.2.1.1.2.44.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnSysDnsServerEntry | 1.3.6.1.4.1.7483.2.1.1.2.44.1.1 | NA | |||||||||||
| CtnSysDnsServerIndex | 1.3.6.1.4.1.7483.2.1.1.2.44.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current . | |||||||||||||
| CtnSysDnsServerIpAddress | 1.3.6.1.4.1.7483.2.1.1.2.44.1.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current . | |||||||||||||
| CtnSysDnsServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.44.1.1.3 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Indicates the IPv6 address of the Syslog Server. | |||||||||||||
| CtnSysDnsServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.44.1.1.4 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnSysDnsServerInetAddress. | |||||||||||||
| NtnTransferPMDiscovery | 1.3.6.1.4.1.7483.2.1.1.2.45 | ||||||||||||
| TtnTransferPMDiscoveryTable | 1.3.6.1.4.1.7483.2.1.1.2.45.1 | NA | |||||||||||
table · not-accessible · current . | |||||||||||||
| RtnTransferPMDiscoveryEntry | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1 | NA | |||||||||||
| CtnTransferPMDiscoveryIndex | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.1 | SnmpAdminString | NA | ||||||||||
column · SnmpAdminString · not-accessible · current Unique identifier associated with this tnTransferPMDiscoveryEntry. | |||||||||||||
| CtnTransferPMDiscoveryRowStatus | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Currently all entries have a row status of active. Sets are permitted with values of createAndGo and destroy, exclusively. | |||||||||||||
| CtnTransferPMDiscoveryFilename | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.3 | SnmpAdminString (SIZE (0..255)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..255)) · read-create · current This attribute indicates remote destination file path. | |||||||||||||
| CtnTransferPMDiscoveryControl | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Controls the Discovery, i.e., starts after the next bin rolled over trap is generated or aborts.
| |||||||||||||
| CtnTransferPMDiscoveryStatus | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This attribute indicates the status of the most recent file transfer.
| |||||||||||||
| CtnTransferPMDiscoveryErrorCode | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This attribute indicates the error code of the most recent file transfer.
| |||||||||||||
| CtnTransferPMDiscoveryServerProtocol | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.7 | AluWdmNewTransferProtocol | RC | ||||||||||
column · AluWdmNewTransferProtocol · read-create · current This attributes indicates the server protocol. | |||||||||||||
| CtnTransferPMDiscoveryServerIp | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.8 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current This attributes indicates the server IPv4 address. | |||||||||||||
| CtnTransferPMDiscoveryServerUserId | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.9 | SnmpAdminString (SIZE (0..128)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..128)) · read-create · current This attribute indicates the userId used to access the server. | |||||||||||||
| CtnTransferPMDiscoveryServerPassword | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.10 | SnmpAdminString (SIZE (0..128)) | RC | ||||||||||
column · SnmpAdminString (SIZE (0..128)) · read-create · current This attribute indicates the password used to access the server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set. | |||||||||||||
| CtnTransferPMDiscoveryServerInetAddressType | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.11 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The value specifies the type of Internet address stored in tnTransferPMDiscoveryServerInetAddress. | |||||||||||||
| CtnTransferPMDiscoveryServerInetAddress | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.12 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current This attribute indicates the IPv6 address of the server. | |||||||||||||
| CtnTransferPMDiscoveryPort | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.13 | Unsigned32 (1..65535) | RC | ||||||||||
column · Unsigned32 (1..65535) · read-create · current This attributes indicates the server port. | |||||||||||||
| CtnTransferPMDiscoveryPrevious15minBinFilesTransfer | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.14 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This attribute indicates the number of previous 15 min bin files that needs to be transferred in the range of 0 to 8. | |||||||||||||
| CtnTransferPMDiscoveryPrevious1dayBinFilesTransfer | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.15 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This attribute indicates the number of previous 1 day bin files that needs to be transferred in the range of 0 to 7. | |||||||||||||
| CtnTransferPMDiscoveryTransferTimeOffset | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.16 | Unsigned32 | RC | ||||||||||
column · Unsigned32 · read-create · current This attribute indicates the file transfer time offset in the range 0 to 600 seconds. | |||||||||||||
| CtnTransferPMDiscovery15minBinFileTransferCount | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.17 | Unsigned32 (0..8) | RO | ||||||||||
column · Unsigned32 (0..8) · read-only · current This attribute indicates the recent number of 15 min bin files transferred. | |||||||||||||
| CtnTransferPMDiscovery1dayBinFileTransferCount | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.18 | Unsigned32 (0..8) | RO | ||||||||||
column · Unsigned32 (0..8) · read-only · current This attribute indicates the recent number of 1 day bin files transferred. | |||||||||||||
| CtnTransferPMDiscovery15minBinFileTransferFailureCount | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.19 | Unsigned32 (0..8) | RO | ||||||||||
column · Unsigned32 (0..8) · read-only · current This attribute indicates the number of 15 min bin files transferred failure count. | |||||||||||||
| CtnTransferPMDiscovery1dayBinFileTransferFailureCount | 1.3.6.1.4.1.7483.2.1.1.2.45.1.1.20 | Unsigned32 (0..8) | RO | ||||||||||
column · Unsigned32 (0..8) · read-only · current This attribute indicates the number of 1 day bin files transferred failure count. | |||||||||||||
Textual conventions
AluWdmOcsLinkStatusINTEGERdown(2)notConnected(3)up(1)OCS node link status.
AluWdmSslOperationStatusINTEGERcompleted(1)failed(3)inProgress(2)none(4)SSL operation status.
AluWdmTransferStatusINTEGERcompleted(2)failTimeout(5)failure(4)inProgress(3)none(1)This attribute indicates the status of the previously executed transfer command operation.
NokiaSysBgpMaxPrefixActionINTEGERalarmOnly(2)disabled(1)restartInterval(4)tearDown(3).
TropicSysTimingReferenceQualityINTEGERdnu(15)dus(10)prc(11)prs(2)sec(14)smc(8)ssua(12)ssub(13)st2(4)st3(7)st3e(6)st4(9)stu(3)tnc(5)unknown(1).
TropicSysTimingReferenceTimingModeINTEGERexternal(2)line(3)local(6)loop(5)through(4)unknown(1).
Groups and compliance
- tnClusterGroup
- tnCsrSanListGroup
- tnHostKeyGroup
- tnLicenseEntitlementGroup
- tnLicenseEntityGroup
- tnNESshKeyGroup
- tnNeDiscoveryGroup
- tnNeDiscoveryScalarsGroup
- tnOcspProfileGroup
- tnPctObjsGroup
- tnSanListAuthGroup
- tnSanListGroup
- tnSnmpTargetAddressGroup
- tnSshCiphersGroup
- tnSshHostKeyGroup
- tnSshKexGroup
- tnSshMacsGroup
- tnSshPrivKeyGroup
- tnSshProfileGroup
- tnSshPubKeyGroup
- tnSysBgpPeerGroup
- tnSysBtInterfaceGroup
- tnSysDebugTransferGroup
- tnSysDiscoverMeGroup
- tnSysDnsServerGroup
- tnSysErrorHandlingGroup
- tnSysFaultCorrelationGroup
- tnSysFeaturesGroup
- tnSysFileInitializationGroup
- tnSysFtpServerGroup
- tnSysHealthCareGroup
- tnSysIpAclEthIfFilterGroup
- tnSysIpAclEthIfFilterScalarsGroup
- tnSysIpAclFilterGroup
- tnSysIpAclFilterScalarsGroup
- tnSysIpAclGroup
- tnSysIpAclInterfaceGroup
- tnSysIpAclInterfaceScalarsGroup
- tnSysIpAclIpv6FilterGroup
- tnSysIpAclIpv6FilterScalarsGroup
- tnSysIpAclIpv6InterfaceGroup
- tnSysIpAclIpv6InterfaceScalarsGroup
- tnSysIpAclIpv6PatternGroup
- tnSysIpAclIpv6PatternScalarsGroup
- tnSysIpAclIpv6SysDefaultGroup
- tnSysIpAclNetIfFilterGroup
- tnSysIpAclNetIfFilterScalarsGroup
- tnSysIpAclPatternGroup
- tnSysIpAclPatternScalarsGroup
- tnSysIpAclScalarsGroup
- tnSysIpAclSysDefaultGroup
- tnSysIpv6AclEthIfFilterGroup
- tnSysIpv6AclEthIfFilterScalarsGroup
- tnSysIpv6AclGroup
- tnSysIpv6AclNetIfFilterGroup
- tnSysIpv6AclNetIfFilterScalarsGroup
- tnSysIpv6AclScalarsGroup
- tnSysKeyStoreCertInfoGroup
- tnSysKeyStoreServiceGroup
- tnSysLicenseInvGroup
- tnSysLicenseMgrGroup
- tnSysLinuxGroup
- tnSysNESshKeyGroup
- tnSysNmsIpListGroup
- tnSysNtpGroup
- tnSysNtpServerAuthenticationGroup
- tnSysNtpServerAuthenticationScalarsGroup
- tnSysNtpServerGroup
- tnSysNtpServerIdStatsGroup
- tnSysOtdrScanResultsTransferGroup
- tnSysOtdrScanSystemProfileGroup
- tnSysOtdrScanSystemProfileMGroup
- tnSysOtdrScanSystemProfileMScalarsGroup
- tnSysOtdrScanSystemProfileScalarsGroup
- tnSysOtdrScanTransferGroup
- tnSysPmFetchBulkGroup
- tnSysSecurityGroup
- tnSysSecurityScalarsGroup
- tnSysTimingGroup
- tnSysTransferLogGroup
- tnSysTrapThrottlingGroup
- tnSyslogGroup
- tnSyslogServerGroup
- tnSystemBackupAndRestoreGroup
- tnSystemBasicsGroup
- tnSystemCompliance
- tnSystemControlNetworkGroup
- tnSystemDiscoveryGroup
- tnSystemLoggingGroup
- tnSystemRedundancyGroup
- tnTlsProfileGroup
- tnTransferPMDiscoveryGroup
- tnTransferSysLogGroup