TROPIC-SYNCE-MIB
Nokia (Formerly 'Alcatel-Lucent')Synchronous Ethernet MIB attributes.
snmptranslate -m TROPIC-SYNCE-MIB -Tpsnmpwalk -v2c -c <community> -m TROPIC-SYNCE-MIB <host> 1.3.6.1.4.1.7483.1.1.2.2.4.6Imports
| IF-MIB | InterfaceIndexOrZero, ifIndex |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| TROPIC-GLOBAL-REG | tnPortModules, tnSyncEMIB |
| TROPIC-PTP-MIB | AluWdmPtpClockIdentifier |
| TROPIC-SHELF-MIB | tnShelfIndex |
| TROPIC-SLOT-MIB | tnSlotIndex |
| TROPIC-SYSTEM-MIB | tnSysSwitchId |
| TROPIC-TC | NokiaSyncStatusMsgType, TropicOperationalCapabilityType, TropicStateQualifierType |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnSyncEMibModule | 1.3.6.1.4.1.7483.1.1.2.2.4.6 | |||
identity Synchronous Ethernet MIB attributes. | ||||
| NtnSyncEConf | 1.3.6.1.4.1.7483.2.2.4.8.1 | |||
| NtnSyncEGroups | 1.3.6.1.4.1.7483.2.2.4.8.1.1 | |||
| GtnSyncEGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.1 | |||
| GtnSyncELineRefGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.2 | |||
group · current .
| ||||
| GtnSyncEControlGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.3 | |||
| GtnSyncEPortGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.4 | |||
| GtnSyncEStationClockGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.5 | |||
| GtnSyncEBITSPortGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.6 | |||
| GtnWanGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.7 | |||
| GtnSyncEPacketswitchControlGroup | 1.3.6.1.4.1.7483.2.2.4.8.1.1.8 | |||
| NtnSyncECompliances | 1.3.6.1.4.1.7483.2.2.4.8.1.2 | |||
| MtnSyncECompliance | 1.3.6.1.4.1.7483.2.2.4.8.1.2.1 | |||
compliance · current . | ||||
| NtnSyncEObjs | 1.3.6.1.4.1.7483.2.2.4.8.2 | |||
| NtnSyncEBasics | 1.3.6.1.4.1.7483.2.2.4.8.2.1 | |||
| TtnSyncETable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1 | NA | ||
table · not-accessible · current Table of Sync-E attributes. | ||||
| RtnSyncEEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1 | NA | ||
| CtnSyncESyncMsg | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.1 | NokiaSyncStatusMsgType | RC | |
column · NokiaSyncStatusMsgType · read-create · current Determines if the timing reference selection for system timing uses Synchronization Status Message (SSM) Quality Levels or Enhanced Quality Levels. | ||||
| CtnSyncEActiveRef | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ID of the association line reference.
| ||||
| CtnSyncEWTR | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The system timing WTR. Current configurable range: 0 to 12, and 999999. | ||||
| CtnSyncESwCmdLineRef | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The third byte represents the switch command: 1 - nocmd 2 - clear 3 - lockout 4 - forceswitch 5 - mannual 6 - auto 7 - clearlockout. The last byte represents the line reference switch to: 0 - internal 1 - lineref0 2 - lineref1 3 - lineref2 4 - lineref3 5 - lineref4 6 - lineref5. | ||||
| CtnSyncEClkModState | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The Sync-E clock mode state.
| ||||
| CtnSyncESystemQL | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The value of the system quality level (SSM), shown in following: 31 - not applicable When the NE is in SDH mode: 0 - quality unknown 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC 5 - DNU 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC. When the NE is in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 17 - SMC 18 - ST4 19 - DUS 20 - PNO 23 - ePRTC 24 - PRTC 25 - ePRC. | ||||
| CtnSyncEQLDegradeThreshold | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The threshold value of SSM quality level degradation for systme timing reference. When the NE is in SDH mode: 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC - Default 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC. When the NE is in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 - Default 23 - ePRTC 24 - PRTC 25 - ePRC. | ||||
| CtnSyncECurrentActiveLineRefFreqOff | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The current frequency offset of the active timing reference.
| ||||
| CtnSyncEAlmProfName | 1.3.6.1.4.1.7483.2.2.4.8.2.1.1.1.9 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current . | ||||
| TtnSyncELineRefTable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2 | NA | ||
table · not-accessible · current Table of VTS map. | ||||
| RtnSyncELineRefEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1 | NA | ||
| CtnSyncELineRefIndex | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The ifIndex of the line reference table. | ||||
| CtnSyncELineRefAssignedPort | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The assigned port for the line reference.
| ||||
| CtnSyncELineRefPriority | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.3 | Unsigned32 (0..8) | RC | |
column · Unsigned32 (0..8) · read-create · current Line reference priority. Current configurable range: 0 to 8. | ||||
| CtnSyncELineRefAdminState | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The administrative state of the line reference.
| ||||
| CtnSyncELineRefOperState | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The operating state of the line reference.
| ||||
| CtnSyncELineLockOut | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current If lock out line reference or not. | ||||
| CtnSyncELineRefState | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The Sync-E line reference state.
| ||||
| CtnSyncELineRefSwState | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The Sync-E line reference switch state.
| ||||
| CtnSyncELineRefIncSSMMsg | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current value of incoming QL on that port. 30 - unstable 31 - not applicable When the NE works in SDH mode: 0 - Unknown 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC 5 - DNU 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC When the NE works in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 17 - SMC 18 - ST4 19 - DUS 20 - PNO 23 - ePRTC 24 - PRTC 25 - ePRC It's applicable only to the timing port with SSM capabilities. | ||||
| CtnSyncELineRefIncSSMStatus | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current status of incoming QL on that port. 0: Valid 1: Invalid 2: Not Supported 3: Not Applicable It's applicable only to the timing port with SSM capabilities. | ||||
| CtnSyncELineRefIncSSMSupp | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Enable or disable the line reference incoming QL processing.
| ||||
| CtnSyncELineRefProvQL | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.12 | Integer32 | RC | |
column · Integer32 · read-create · current Manually provisioned incoming SSM value for the line reference. The value can be: 0 - AUTO When the NE is in SDH mode: 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC 5 - DNU 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC When the NE works in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 17 - SMC 18 - ST4 19 - DUS 20 - PNO 23 - ePRTC 24 - PRTC 25 - ePRC Note: The parameter can be provisioned only when SyncELineRefIncSSMSupp is enabled. | ||||
| CtnSyncELineRefAssociatedPort | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.13 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The associated physical port of the line reference. This parameter replaces tnSyncELineRefAssignedPort in order to support assigning a line reference to a port in other slots. | ||||
| CtnSyncELineRefPriorityOfStationClock | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.14 | Unsigned32 (0..8) | RC | |
column · Unsigned32 (0..8) · read-create · current Line reference priority for the output station clock. Current configurable range: 0 to 8. | ||||
| CtnSyncELineRefLockOutOfStationClock | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.15 | TruthValue | RO | |
column · TruthValue · read-only · current If lock out the line reference or not for the output station clock. | ||||
| CtnSyncELineRefSwStateOfStationClock | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current The Sync-E line reference switch state of the output station clock.
| ||||
| CtnSyncELineRefCurrentFreqOff | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The current frequency offset of the timing reference.
| ||||
| CtnSyncELineRefAlmProfName | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.18 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current . | ||||
| CtnSyncELineRefIncExtdQLTLVClockID | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.19 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current Incoming Extended QL TLV Clock ID. | ||||
| CtnSyncELineRefIncExtdQLTLVMixedClockType | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Incoming Extended QL TLV Mixed Clock Type Flag.
| ||||
| CtnSyncELineRefIncExtdQLTLVPartialChain | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Incoming Extended QL TLV Partial Chain Flag.
| ||||
| CtnSyncELineRefIncExtdQLTLVNumeEEC | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.22 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Incoming Extended QL TLV Number of eEEC. | ||||
| CtnSyncELineRefIncExtdQLTLVNumEEC | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.23 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Incoming Extended QL TLV Number of EEC. | ||||
| CtnSyncELineRefProvQLOfStationClock | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.24 | Integer32 | RC | |
column · Integer32 · read-create · current Manually provisioned incoming SSM value of the line reference output timing. The value can be: 0 - AUTO When the NE is in SDH mode: 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC 5 - DNU 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC When the NE works in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 17 - SMC 18 - ST4 19 - DUS 20 - PNO 23 - ePRTC 24 - PRTC 25 - ePRC Note: The parameter can be provisioned only when SyncELineRefIncSSMSupp is enabled. | ||||
| CtnSyncELineRefIncSSMMsgOfStationClock | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current value of incoming QL for output timing on that port. 30 - unstable 31 - not applicable When the NE works in SDH mode: 0 - Unknown 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC 5 - DNU 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC When the NE works in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 17 - SMC 18 - ST4 19 - DUS 20 - PNO 23 - ePRTC 24 - PRTC 25 - ePRC It's applicable only to the timing port with SSM capabilities. | ||||
| CtnSyncELineRefIncSSMStatusOfStationClock | 1.3.6.1.4.1.7483.2.2.4.8.2.1.2.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the current status of incoming QL on that port for output timing. 0: Valid 1: Invalid 2: Not Supported 3: Not Applicable It's applicable only to the timing port with SSM capabilities. | ||||
| TtnSyncEControlTable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.3 | NA | ||
table · not-accessible · current Table of Sync-E Control attributes. | ||||
| RtnSyncEControlEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.3.1 | NA | ||
| CtnSyncEControlEECEnable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.3.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current enable - The Synchronous Ethernet is supported
for the pack and the synchronization
attributes can be configured.
disable - The Synchronous Ethernet is not supported
for the pack and the synchronization
attributes can not be configured.
| ||||
| TtnSyncEPortTable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.4 | NA | ||
table · not-accessible · current Table of Sync-E Port attributes. | ||||
| RtnSyncEPortEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.4.1 | NA | ||
| CtnSyncEOprMode | 1.3.6.1.4.1.7483.2.2.4.8.2.1.4.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current The port Synchronous Ethernet Operation Mode. When the port is in SYNC mode, recovered clock of its input signal can be selected as a reference clock to the system clock. When the port is in NON-SYNC mode, the recovered clock of its input signal shall not be a candidate to system timing references.
| ||||
| CtnSyncEOutgoingForceSsmTrans | 1.3.6.1.4.1.7483.2.2.4.8.2.1.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The port SSM/Quality Level Transmission value.
The value can be:
In SDH mode - act, prc, ssua, ssub, sec, dnu,
ePRTC, PRTC, ePRC, eSEC, none;
In sonet mode - act, stu, prs, st2, sts3e, st3,
ePRTC, PRTC, ePRC, dus, none.
| ||||
| TtnSyncEStationClockTable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5 | NA | ||
table · not-accessible · current Table of Sync-E station clock attributes. | ||||
| RtnSyncEStationClockEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1 | NA | ||
| CtnSyncEStationClockSyncMsg | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.1 | NokiaSyncStatusMsgType | RC | |
column · NokiaSyncStatusMsgType · read-create · current Determines if the timing reference selection for station clock timing uses Synchronization Status Message (SSM) Quality Levels or Enhanced Quality Levels. | ||||
| CtnSyncEStationClockActiveRef | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ID of the association line reference.
| ||||
| CtnSyncEStationClockWTR | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The station clock timing WTR. Current configurable range: 0 to 12, and 999999. | ||||
| CtnSyncEStationClockSwCmdLineRef | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The third byte represents the switch command: 1 - nocmd 2 - clear 3 - lockout 4 - forceswitch 5 - mannual 6 - auto 7 - clearlockout. The last byte represents the line reference switch to: 0 - internal 1 - lineref0 2 - lineref1 3 - lineref2 4 - lineref3 5 - lineref4 6 - lineref5. | ||||
| CtnSyncEStationClockSystemQL | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The value of the system quality level (SSM) for the output timing clock, shown in following: 31 - not applicable When the NE is in SDH mode: 0 - quality unknown 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC 5 - DNU 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC. When the NE is in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 17 - SMC 18 - ST4 19 - DUS 20 - PNO 23 - ePRTC 24 - PRTC 25 - ePRC. | ||||
| CtnSyncEStationClockQLThreshold | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the threshold value for the quality level i.e., SSM value for squelching the output towards timing output. If the quality value of the current selected signal for the output is below the threshold value, the output will be squelched. The squelching can be disabled by means of using the value DNU or DUS. When the NE is in SDH mode: 1 - PRC 2 - SSU_A 3 - SSU_B 4 - SEC 5 - DNU 23 - ePRTC 24 - PRTC 25 - ePRC 26 - eSEC. When the NE is in SONET mode: 11 - PRS 12 - STU 13 - ST2 14 - TNC 15 - ST3E 16 - ST3 17 - SMC 18 - ST4 19 - DUS 23 - ePRTC 24 - PRTC 25 - ePRC. Default value: SEC - for node working in SDH mode ST3 - for node working in SONET mode | ||||
| CtnSyncEStationClockOutSel | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies which signal is selected for the output
station clock:
OUTTIM - Output is selected from output timing
selection process
SETG - Output is selected from system internal
timing The ID of the association line
reference.
| ||||
| CtnSyncEStationClockAlmProfName | 1.3.6.1.4.1.7483.2.2.4.8.2.1.5.1.8 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current . | ||||
| TtnSyncEBITSPortTable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6 | NA | ||
table · not-accessible · current Table of BITS port attributes. | ||||
| RtnSyncEBITSPortEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1 | NA | ||
| CtnSyncEBITSPortDirection | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current Indicate the direction of the BITS port.
| ||||
| CtnSyncEBITSPortSignalType | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current Specify the signal type for the BITS interface: 0 - 2MHz 1 - unframed E1 2 - framed E1 without SSM 3 - framed E1 with SSM 4 - DS1 SF 5 - DS1 ESF. In SDH mode, 2MHz and E1 signal types are valid and 2MHz is the default value. In SONET mode, only the DS1 signal types are valid and DS1 SF is the default value. | ||||
| CtnSyncEBITSPortSaBit | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the Sa bit location used to carry the SSM information. This parameter is only applicable when tnSyncEBITSPortSignalType = 3 (framed E1 with SSM)
| ||||
| CtnSyncEBITSPortOutputSSMTrans | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The port SSM/Quality Level Transmission value.
The value can be:
In SDH mode - act, prc, ssua, ssub, sec,
dnu, none;
In sonet mode - act, stu, prs, st2, sts3e,
st3, dus, none.
Restriction: The parameter is only applicable
when tnSyncEBITSPortDirection = output and
tnSyncEBITSPortSignalType = 3 (framed E1 with
SSM)or 5 (DS1 ESF).
| ||||
| CtnSyncEBITSPortOutputAISMode | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies which signal is inserted for the timing
output port if the output signal is squelched.
The parameter is only applicable for output port
types supporting SSM.
AISMODE - AIS signal is inserted.
QLMODE - DUS is inserted as SSM; output is
squelched.
Restriction: The parameter is only applicable
when tnSyncEBITSPortDirection = output and
tnSyncEBITSPortSignalType = 3 (framed E1 with SSM)
or 5 (DS1 ESF).
| ||||
| CtnSyncEBITSPortLineImpedance | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Nominal line impedance. When in SDH mode, imp75ohms or imp120ohms could be used and the default is imp120ohms. When in ONET mode, imp100ohms could be used and the default is imp100ohms.
| ||||
| CtnSyncEBITSPortLineCode | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Line code. This attribute is applicable when tnSyncEBITSPortSignalType is DS1 SF or DS1 ESF.
| ||||
| CtnSyncEBITSPortLbo | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Line equalization value for the BITS output port, taking one of the following values: - lbo: no compensation - lbo1: 0 to 133 feet - lbo2: 133 to 266 feet - lbo3: 267 to 399 feet - lbo4: 400 to 533 feet - lbo5: 534 to 655 feet This attribute is applicable when tnSyncEBITSPortSignalType is DS1 SF or DS1 ESF.
| ||||
| CtnSyncEBITSPortAlmProfName | 1.3.6.1.4.1.7483.2.2.4.8.2.1.6.1.9 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current Alarm profile for BITs port | ||||
| TtnWanTable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7 | NA | ||
table · not-accessible · current Table of Wan attributes. | ||||
| RtnWanEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1 | NA | ||
| CtnWanAlmProfName | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.1 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current . | ||||
| CtnWanSyncEOprMode | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The Synchronous Ethernet Operation Mode. When in SYNC mode, recovered clock of its input signal can be selected as a reference clock to the system clock.When in NON-SYNC mode, the recovered clock of its input signal shall not be a candidate to system timing references.
| ||||
| CtnWanSyncEOutgoingForceSsmTrans | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The port SSM/Quality Level Transmission value.
The value can be:
In SDH mode - act, prc, ssua, ssub, sec, dnu,
ePRTC, PRTC, ePRC, eSEC, none.
In SONET mode - act, prs, stu, st2, st3e, st3,
ePRTC, PRTC, ePRC, dus, none.
| ||||
| CtnWanAdminStatus | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Wan administrative state. It may be used to suppress the alarms or disable consequent actions on the WAN entity.
| ||||
| CtnWanOperStatus | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current operational state of WAN entity
| ||||
| CtnWanStateQualifier | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.6 | TropicStateQualifierType | RO | |
column · TropicStateQualifierType · read-only · current Indicates the state qualifier (i.e., the secondary state) of the WAN state. | ||||
| CtnWanOperationalCapability | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.7 | TropicOperationalCapabilityType | RO | |
column · TropicOperationalCapabilityType · read-only · current The partiallyEnabled(3) state means an abnormal state. | ||||
| CtnWanDescription | 1.3.6.1.4.1.7483.2.2.4.8.2.1.7.1.8 | SnmpAdminString (SIZE (0..255)) | RC | |
column · SnmpAdminString (SIZE (0..255)) · read-create · current Wan Description. | ||||
| TtnSyncEPacketswitchControlTable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.8 | NA | ||
table · not-accessible · current Table of Sync-E Control attributes for a packetswitch. This table provides the same functionality as tnSyncEControlTable, but requires a switchid as an index | ||||
| RtnSyncEPacketswitchControlEntry | 1.3.6.1.4.1.7483.2.2.4.8.2.1.8.1 | NA | ||
| CtnSyncEPacketswitchControlEECEnable | 1.3.6.1.4.1.7483.2.2.4.8.2.1.8.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current enable - Synchronous Ethernet is supported for
the packetswitch and the synchronization
attributes can be configured.
disable - Synchronous Ethernet is not supported for
the packetswitch and the synchronization
attributes can not be configured.
| ||||