TROPIC-PTP-MIB
Nokia (Formerly 'Alcatel-Lucent')Nokia OPD-WDM MIB for 1588V2 module
snmptranslate -m TROPIC-PTP-MIB -Tpsnmpwalk -v2c -c <community> -m TROPIC-PTP-MIB <host> 1.3.6.1.4.1.7483.1.1.2.2.4.7Imports
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TROPIC-GLOBAL-REG | tnPortModules, tnPtpMIB |
| TROPIC-SHELF-MIB | tnShelfIndex |
| TROPIC-SLOT-MIB | tnSlotIndex |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnPtpMibModule | 1.3.6.1.4.1.7483.1.1.2.2.4.7 | |||
identity Nokia OPD-WDM MIB for 1588V2 module | ||||
| NtnPtpMIBObjects | 1.3.6.1.4.1.7483.2.2.4.9.1 | |||
| NtnPtpSystem | 1.3.6.1.4.1.7483.2.2.4.9.1.1 | |||
| TtnPtpSystemTable | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1 | NA | ||
table · not-accessible · current This table provides global parameters for a PTP-capable card. | ||||
| RtnPtpSystemEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1 | NA | ||
row · not-accessible · current Configuration information concerning PTP of the card.
| ||||
| CtnPtpSystemClockMode | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current This parameter determines the PTP operational mode of the card. It is intended to be managed by the System Operator. 0: 1588 function of this card is disabled 1: Ordinary Clock - Slave 2: Ordinary Clock - Master 3: Boundary Clock 4: End-to-End Transparent Clock 5: Peer-to-Peer Transparent Clock 6: End-to-End Transparent Clock And OC-Slave 7: End-to-End Transparent Clock And BC 8: Peer-to-Peer Transparent Clock And OC-Slave 9: this card provides timestamping for the local ports only, need to work with the PTPCTL card 10: ITU-T G.8275.1 T-GM 11: ITU-T G.8275.1 T-BC 12: ITU-T G.8275.1 T-TSC. | ||||
| CtnPtpSystemFrequencyReference | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current This parameter determines the frequency reference for the PTP clocks in the card. It is intended to be managed by the System Operator. This parameter is valid when the tnPtpSystemClockMode = 1/2/3/6/7/8 0: the local PTP clock uses the physical layer frequency reference, and this clock is syntonized with the PTP master. 1: the local PTP clock uses the physical layer frequency reference, but this clock is' unsyntonized with the PTP master. 2: the local PTP clock uses the packet layer frequency reference which is recovered from the PTP. | ||||
| CtnPtpSystemTimeReference | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current This parameter determines the time reference
for the local PTP clocks in the card. It is
intended to be managed by the System Operator.
This parameter is valid when the
tnPtpSystemClockMode = 2/3
0: no reference.
1: the external 1pps. The local PTP clock
aligns the 1588 time to the phase of the
external 1pps.
2: the external ToD
3: the recovered PTP time.
4: the external ToD or the recovered PTP time.
Values of 0/1/2 apply to OC-Master only;
Values of 2/3/4 apply to BC only. | ||||
| CtnPtpSystemNextClockNumber | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This parameter indicates the next available clock number in the card, which will be used when the user wants to create a new row in the tnPtpClockDefaultDSConfigTable. | ||||
| CtnPtpSystemClockProfile | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current This parameter determines the PTP profile of the card. It is intended to be managed by the System Operator. 0: IEEE_1588_2008_CCSA profile 1: G_8275_1 profile.
| ||||
| CtnPtpSystemClockServoMode | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current This parameter determines the PTP Servo Mode of the card. It is intended to be managed by the System Operator. 0: bellLabs 1: standard | ||||
| CtnPtpSystemToDMessageType | 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current ToD message format type. 0: ccsa 1: itu.
| ||||
| NtnPtpClock | 1.3.6.1.4.1.7483.2.2.4.9.1.2 | |||
| TtnPtpClockDefaultDSConfigTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1 | NA | ||
table · not-accessible · current This table provides configurable information for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. | ||||
| RtnPtpClockDefaultDSConfigEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1 | NA | ||
| CtnPtpClockIndex | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.1 | AluWdmPtpClockIndex | NA | |
column · AluWdmPtpClockIndex · not-accessible · current A unique value which identifies a PTP clock in an NE. | ||||
| CtnPtpClockDefaultDSConfigDomain | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.2 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The domain associated with the PTP clock. | ||||
| CtnPtpClockDefaultDSConfigPriority1 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.3 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The priority1 value of the PTP clock. | ||||
| CtnPtpClockDefaultDSConfigPriority2 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.4 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The priority2 value of the PTP clock. | ||||
| CtnPtpClockDefaultDSConfigPreferedGM | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.5 | AluWdmPtpClockIdentifier | RC | |
column · AluWdmPtpClockIdentifier · read-create · current The identifier of a PTP clock that the local PTP clock will lock to. It is for static master clock selection. It is valid for OC-slave or BC. And for BC, it is valid only when tnPtpSystemTimeReference =3. NULL is initializing value. | ||||
| CtnPtpClockDefaultDSConfigIpAddressType | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.6 | InetAddressType | RC | |
column · InetAddressType · read-create · current This parameter indicates the IP address type for tnPtpClockDefaultDSConfigIpAddress. The default value is IPv4(1). | ||||
| CtnPtpClockDefaultDSConfigIpAddress | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.7 | InetAddress | RC | |
column · InetAddress · read-create · current The unicast IP address of the PTP clock. NULL is initializing value. | ||||
| CtnPtpClockDefaultDSConfigAdminStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.8 | Integer32 | RC | |
column · Integer32 · read-create · current It is used for the user to enable/disable the PTP clock. 0: Disable 1: Enable. | ||||
| CtnPtpClockDefaultDSConfigRowStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus of PTP clock entry. | ||||
| CtnPtpClockDefaultDSConfigLocalPriority | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.10 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The localPriority value of the PTP clock. | ||||
| CtnPtpClockDefaultDSConfigMaxStepsRemoved | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.11 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current A clock would not qualify any Announce messages received where the stepsRemoved field in the ingress header matched or exceeded the maxStepsRemoved field. | ||||
| CtnPtpClockDefaultDSConfigEPRTCSupport | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current Enable/Disable Enhanced Primary Reference Time Clock. | ||||
| CtnPtpClockDefaultDSConfigSyncUncertainMon | 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current Enable/Disable Synchronization Uncertain Indication Monitoring. | ||||
| TtnPtpClockDefaultDSInfoTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2 | NA | ||
table · not-accessible · current This table provides non-configurable information for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. | ||||
| RtnPtpClockDefaultDSInfoEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1 | NA | ||
| CtnPtpClockDefaultDSInfoIdentifier | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.1 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current The identifier of the PTP clock. | ||||
| CtnPtpClockDefaultDSInfoTwoStepFlag | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current This is an indicator of whether master-slave
synchronization utilizes follow-up messaging (IEEE
1588-2008 Section 8.2.1.2.1.). This parameter is
read-only. A PTP port has a configurable parameter
which determines if follow-up messaging will be used
for this port.
true: If some of the PTP ports in the clock use
follow-up messaging.
false: If none of the PTP ports in the clock use
follow-up messaging.
Only false is supported in the current PTP implementation. | ||||
| CtnPtpClockDefaultDSInfoNumberOfPorts | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of PTP ports in the PTP clock. | ||||
| CtnPtpClockDefaultDSInfoClass | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.4 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The clock class on the PTP clock (IEEE1588-2008 Section 8.2.1.3.1.1). | ||||
| CtnPtpClockDefaultDSInfoAccuracy | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.5 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The accuracy of the PTP clock | ||||
| CtnPtpClockDefaultDSInfoOffsetScaledLogVariance | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The frequency offset scaled log variance of the PTP clock (IEEE P1588-2008 Section 7.6.3). | ||||
| CtnPtpClockDefaultDSInfoSignalFail | 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current PTPClock Signal Fail Flag. | ||||
| TtnPtpClockCurrentDSTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3 | NA | ||
table · not-accessible · current This table provides tn PTP Clock current Data Set for an OC/BC PTP Clock. For TC (E2E or P2P), this table is not available. | ||||
| RtnPtpClockCurrentDSEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1 | NA | ||
| CtnPtpClockCurrentDSOffSetFromMaster | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The current value of the time difference between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.3 of IEEE1588-2008. | ||||
| CtnPtpClockCurrentDSMeanPathDelay | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The mean propagation time between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.4 of IEEE1588-2008. | ||||
| CtnPtpClockCurrentDSCurrentTime | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.3 | OCTET STRING (SIZE (81)) | RO | |
column · OCTET STRING (SIZE (81)) · read-only · current The current time of the PTP clock. ASCII encoded decimal number in units of seconds with a precision of 9. | ||||
| CtnPtpClockCurrentDSRecoveredClockState | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.4 | AluWdmPtpRecoveredClockState | RO | |
column · AluWdmPtpRecoveredClockState · read-only · current The synchronization state of the PTP clock. | ||||
| CtnPtpClockCurrentDSLockedPtpPort | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The number or index of the PTP port where the PTP clock is locked to. This parameter together with the tnPtpClockIndex points to a row of the tnPtpPortDSConfigTable. It is meaningful fo OC-slave or BC. And for BC, it is valid only when tnPtpSystemTimeReference = (the recovered PTP time). | ||||
| CtnPtpClockCurrentDSStepsRemoved | 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.6 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The number of PTP clocks along the timing distribution path from the Grandmaster to the local PTP clock. | ||||
| TtnPtpClockParentDSTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4 | NA | ||
table · not-accessible · current This table provides information of the Parent Data Set for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. | ||||
| RtnPtpClockParentDSEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1 | NA | ||
| CtnPtpClockParentDSIdentifier | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.1 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current Identifier of the parent clock which the local PTP clock locks to. If a PTP clock locks to an external ToD input interface, it should be equal to: 1 - for 1pps/ToD interface #1 2 - for 1pps/ToD interface #2. | ||||
| CtnPtpClockParentDSPortNum | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The PTP port number of the parent clock, via which the local PTP clock is synchronizing to the parent clock. | ||||
| CtnPtpClockParentDSStats | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current This is an indicator of whether the stats of the parent clock are collected by the local PTP clock. | ||||
| CtnPtpClockParentDSOffsetScaledLogVariance | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The frequency offset scaled log variance of the parent clock (IEEE P1588-2008 Section 7.6.3). | ||||
| CtnPtpClockParentDSPhaseChangeRate | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The phase change rate of the parent clock(IEEE P1588-2008 Section 7.6.3). | ||||
| CtnPtpClockParentDSGrandmasterClockId | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.6 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current The clock identifier of the grandmaster which the parent clock locks to. | ||||
| CtnPtpClockParentDSGrandmasterClass | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.7 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The clock class of the grandmaster which the parent clock locks to. | ||||
| CtnPtpClockParentDSGrandmasterAccuracy | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.8 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The accuracy of the grandmaster which the parent clock locks to. | ||||
| CtnPtpClockParentDSGrandmasterOffsetScaledLogVariance | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The OffsetScaledLogVariance value of the grandmaster which the parent clock locks to. | ||||
| CtnPtpClockParentDSGrandmasterPriority1 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.10 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The priority1 value of the grandmaster which the parent clock locks to. | ||||
| CtnPtpClockParentDSGrandmasterPriority2 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.11 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current The priority2 value of the grandmaster which the parent clock locks to. | ||||
| TtnPtpClockTimePropertiesDSTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5 | NA | ||
table · not-accessible · current This table provides the information of the Time Properties Data Set for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available. | ||||
| RtnPtpClockTimePropertiesDSEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1 | NA | ||
row · not-accessible · current Time properties information of an OC/BC PTP clock.
| ||||
| CtnPtpClockTimePropertiesDSCurrentUtcOffset | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The current UTC offset value. Refer to Section 8.2.4.2 of IEEE1588-2008. The unit is seconds. | ||||
| CtnPtpClockTimePropertiesDSCurrentUtcOffsetValid | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current This parameter indicates whether current UTC offset is valid or not. Refer to Section 8.2.4.3 of IEEE1588-2008. | ||||
| CtnPtpClockTimePropertiesDSLeap59 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current This parameter indicates whether the last minute of the current UTC day contains 59 seconds or not. Refer to Section 8.2.4.4 of IEEE1588-2008. | ||||
| CtnPtpClockTimePropertiesDSLeap61 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current This parameter indicates whether the last minute of the current UTC day contains 61 seconds or not. Refer to Section 8.2.4.5 of IEEE1588-2008. | ||||
| CtnPtpClockTimePropertiesDSTimeTraceable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current This parameter indicates whether the timescale or the current UTC offset are traceable to a primary reference or not. Refer to Section 8.2.4.6 of IEEE1588-2008. | ||||
| CtnPtpClockTimePropertiesDSFrequencyTraceable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current This parameter indicates whether the frequency determining the timescale is traceable to a primary reference or not. Refer to Section 8.2.4.7 of IEEE1588-2008. | ||||
| CtnPtpClockTimePropertiesDSPtpTimescale | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current This parameter indicates the type of time scale of the grandmaster clock: true: PTP timescale false: ARB timescale Refer to Section 8.2.4.8 of IEEE1588-2008. | ||||
| CtnPtpClockTimePropertiesDSPtpTimeSource | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.8 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current This parameter indicates the timesource used by grandmaster clock: -0x10: ATOMIC_CLOCK -0x20: GPS -0x30: TEERESTRIAL_RADIO -0x40: PTP -0x50: NTP -0x60: HAND_SET -0x90: OTHER -0xA0: INTERNAL_OSCILLATOR Refer to Section 8.2.4.9 of IEEE1588-2008. | ||||
| CtnPtpClockTimePropertiesDSSyncUncertainFlag | 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current This parameter indicates if the SynchronizationUncertain flag of incoming announce message from the parent clock is TRUE or FALSE. It is valid only when the PTP profile is itug8275dot1 and the SyncUncertainMon is ENABLE. | ||||
| TtnPtpClockPathTraceDSTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.6 | NA | ||
table · not-accessible · current This table provides tn PTP Clock Path Trace Data Set for a PTP Clock. | ||||
| RtnPtpClockPathTraceDSEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1 | NA | ||
| CtnPtpClockPathTraceDSEnable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current Enable/Disable the Path Trace mechanism. | ||||
| CtnPtpClockPathTraceDSList | 1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.2 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current A list of ClockIdentity values. The length of one ClockIdentity is 8. | ||||
| TtnPtpClockSyncOamTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7 | NA | ||
table · not-accessible · current This table provides the PTP Clock Sync OAM attributes. | ||||
| RtnPtpClockSyncOamEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1 | NA | ||
| CtnPtpClockRealtimeTimeOffsetDuration | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.1 | Unsigned32 (1..15) | RC | |
column · Unsigned32 (1..15) · read-create · current Duration time(minute) for the PTP Clock Realtime Time Offset. Range: 1 to 15 minutes.
| ||||
| CtnPtpClockRealtimeTimeOffsetInterval | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.2 | Unsigned32 (1..5) | RC | |
column · Unsigned32 (1..5) · read-create · current Interval time(second) for the PTP Clock Realtime Time Offset. Range: 1 to 5 seconds.
| ||||
| CtnPtpClockRealtimeTimeOffset1 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.3 | OCTET STRING (SIZE (0..1200)) | RO | |
column · OCTET STRING (SIZE (0..1200)) · read-only · current The PTP Clock Realtime Time Offset part 1.
Every Time Offset value is an Integer32(4-byte).
The maximum size of
tnPtpClockRealtimeTimeOffset1,
tnPtpClockRealtimeTimeOffset2, and
tnPtpClockRealtimeTimeOffset3 is 1200-byte,
which is 300 Time Offset values.
The number of Time Offset is decided by
Duration(tnPtpClockRealtimeTimeOffsetDuration) and
Interval(tnPtpClockRealtimeTimeOffsetInterval).
For example:
Duration = 12(minutes), equals to 720 seconds;
Interval = 2(seconds).
Then the number of Time Offset = Duration / Interval
= 720 / 2 = 360
There will be totally 360 Time Offset values in
tnPtpClockRealtimeTimeOffset1,
tnPtpClockRealtimeTimeOffset2, and
tnPtpClockRealtimeTimeOffset3.
tnPtpClockRealtimeTimeOffset1 contains
the Time Offset value 1 to 300, size will be
300*4=1200 bytes, 300 Integer32 values.
tnPtpClockRealtimeTimeOffset2 contains
the Time Offset value 301 to 360, size will be
60*4=240 bytes, 60 Integer32 values.
tnPtpClockRealtimeTimeOffset3 contains
NO Time Offset values, size will be 0 empty.
The range of the Time Offset value is
0x80000001(-2147483647) to 0x7FFFFFFF(2147483647).
Special Time Offset value 0x80000000 represents
that the Realtime Time Offset is Not Available(NA). | ||||
| CtnPtpClockRealtimeTimeOffset2 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.4 | OCTET STRING (SIZE (0..1200)) | RO | |
column · OCTET STRING (SIZE (0..1200)) · read-only · current The PTP Clock Realtime Time Offset part 2. Refer to tnPtpClockRealtimeTimeOffset1. | ||||
| CtnPtpClockRealtimeTimeOffset3 | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.5 | OCTET STRING (SIZE (0..1200)) | RO | |
column · OCTET STRING (SIZE (0..1200)) · read-only · current The PTP Clock Realtime Time Offset part 3. Refer to tnPtpClockRealtimeTimeOffset1. | ||||
| CtnPtpClockSyncLossDetectionInterval | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.6 | Unsigned32 (2..255) | RC | |
column · Unsigned32 (2..255) · read-create · current The number of SYNC Interval to raise PtpClock SYNCLOSS alarm. Range: 2 to 255. | ||||
| CtnPtpClockDelayRespLossDetectionInterval | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.7 | Unsigned32 (2..255) | RC | |
column · Unsigned32 (2..255) · read-create · current The number of DELAY_RESP Interval to raise PtpClock DELAYRESPLOSS alarm. Range: 2 to 255. | ||||
| CtnPtpClockPtpInputDegradeThreshold | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.8 | Unsigned32 (6..248) | RC | |
column · Unsigned32 (6..248) · read-create · current The Threshold value to raise PtpClock PTPINPUTDEG alarm. For IEEE_1588_2008_CCSA profile, valid values are 6, 7, 8, 52, 187. For G_8275_1 profile, valid values are 6, 7, 135, 140, 150, 160, 165, 248. | ||||
| CtnPtpClockTimeErrorReferencePortIndex | 1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.9 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The Reference Input 1PPS/ToD port index for the PTP Time Error(PTERREF). | ||||
| TtnPtpClockGenericTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.8 | NA | ||
table · not-accessible · current This table provides generic information for a PTP clock. | ||||
| RtnPtpClockGenericEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1 | NA | ||
| CtnPtpClockMode | 1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.1 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This parameter determines the PTP operational mode of
the card. It is intended to be managed by the System
Operator.
0: 1588 function of this card is disabled
1: Ordinary Clock - Slave
2: Ordinary Clock - Master
3: Boundary Clock
10: ITU-T G.8275.1 T-GM
11: ITU-T G.8275.1 T-BC
12: ITU-T G.8275.1 T-TSC
13: ITU-T G.8275.1 T-TC Carrier TC
14: Combined Carrier TC,
ITU-T G.8275.1 T-TSC + Carrier TC
15: ITU-T G.8275.1 T-TC Client TC. | ||||
| CtnPtpClockAlmProfName | 1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.2 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current ASAP (alarm severity assignment profile) Name for PTP clock. | ||||
| TtnPtpTransparentClockDefaultDSTable | 1.3.6.1.4.1.7483.2.2.4.9.1.2.9 | NA | ||
table · not-accessible · current This table provides the default data set of Transparent Clock. Refer to 8.3.2 transparentClockDefaultDS data set member specifications. | ||||
| RtnPtpTransparentClockDefaultDSEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1 | NA | ||
| CtnPtpTransparentClockDefaultDSClockIdentity | 1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.1 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current The clockIdentity of the Transparent Clock. | ||||
| CtnPtpTransparentClockDefaultDSNumberPorts | 1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of PTPPorts of the Transparent Clock. | ||||
| CtnPtpTransparentClockDefaultDSDelayMechanism | 1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current E2E(end-to-end) or P2P(peer-to-peer) Transparent Clock.
| ||||
| CtnPtpTransparentClockDefaultDSPrimaryDomain | 1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.4 | Unsigned32 (24..43) | RC | |
column · Unsigned32 (24..43) · read-create · current The domainNumber of the primary syntonization domain. | ||||
| NtnPtpPort | 1.3.6.1.4.1.7483.2.2.4.9.1.3 | |||
| TtnPtpPortNextIndexTable | 1.3.6.1.4.1.7483.2.2.4.9.1.3.1 | NA | ||
table · not-accessible · current This table provides the next available index for a PTP port to be created in a PTP clock. | ||||
| RtnPtpPortNextIndexEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1 | NA | ||
row · not-accessible · current Next available index for a PTP port to be created in a PTP clock.
| ||||
| CtnPtpPortNextIndex | 1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This parameter indicates the next available index for a PTP port to be created in a PTP clock, which will be used when the user wants to create a new row in tnPtpPortDSConfigTable. | ||||
| TtnPtpPortDSConfigTable | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2 | NA | ||
table · not-accessible · current This table provides configuration for a PTP port. | ||||
| RtnPtpPortDSConfigEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1 | NA | ||
row · not-accessible · current Configuration information concerning a PTP port. | ||||
| CtnPtpPortDSPortIndex | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The value of tnPtpPortDSPortIndex uniquely identifies a PTP port in a PTP clock. It equals to the portNumber used in the PTP message. Refer to Section 7.5.2.3 of IEEE1588-2008. | ||||
| CtnPtpPortDSConfigAssociatedPhysicalPort | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.2 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current The physical port which this PTP port is associated to. For the same physical port, it has the same value as 'ifIndex' of the card's port table. | ||||
| CtnPtpPortDSConfigVlanVID | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The VLAN-ID of the Vlan tag for the tx/rx PTP messages. It shall be within the range of [0,4094], 0 means untagged. | ||||
| CtnPtpPortDSConfigVlanTPID | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The TPID of the Vlan tag for the tx/rx PTP messages. It is valid when tnPtpPortDSConfigVlanVID is not 0. | ||||
| CtnPtpPortDSConfigAnnoRxTimeout | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The administrative value for the number of timeouts for the announce message associated with the 1588 PTP reference/port. The total time in seconds to timeout is calculated by the tnPtpPortDSAnnoRxTimeout * 2 ^ tnPtpPortDSLogAnnoInterval. Current configurable range: 2 to 255. | ||||
| CtnPtpPortDSConfigLogAnnoInterval | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the announce message in this PTP port. Valid values: -4, -3, -2, -1, 0, 1, 2, 3, 4. | ||||
| CtnPtpPortDSConfigLogSyncInterval | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the sync message in this PTP port.
Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1,
2, 3, 4. | ||||
| CtnPtpPortDSConfigLogDelayReqInterval | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.8 | Integer32 | RC | |
column · Integer32 · read-create · current The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the delay_req message in this PTP
port.
Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1,
2, 3, 4. | ||||
| CtnPtpPortDSConfigLogMinPDelayReqInterval | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current The administrative value, which is represented
as logarithm to the base 2 of the transmission
interval for the pdelay_req message in this PTP
port.
Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1,
2, 3, 4. | ||||
| CtnPtpPortDSConfigAdminStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.10 | Integer32 | RC | |
column · Integer32 · read-create · current It is used for the user to administratively manage the PTP protocols on the PTP port 0: Disable 1: Enable 2: MT1 (maintenance state 1) 3: MT2 (maintenance state 2). | ||||
| CtnPtpPortDSConfigRole | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current It is used for the user to set the role of the PTP port. It is valid for BC only. 0: Automatic 1: Slave 2: Master 3: Passive. | ||||
| CtnPtpPortDSConfigDelayMechanism | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The delay mechanism for the PTP port.
| ||||
| CtnPtpPortDSConfigVersionNumber | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current The protocol version to be supported in the PTP port.
| ||||
| CtnPtpPortDSConfigAsymCorrection | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.14 | Integer32 | RC | |
column · Integer32 · read-create · current It allows the user to specify the correction
delay for asymmetrical network path. Refer to
Section 7.4.2 of IEEE1588-2008.
Value range: {-100ms, +100ms}.
The unit of this attribute shall be ns and the
steps of this attribute shall be 1ns. | ||||
| CtnPtpPortDSConfigTwoStepFlag | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current This parameter determines if follow-up messaging will be used for this PTP port. true: If the port will use follow-up messaging false: If the port will not use follow-up messaging. Only false is supported in the current PTP implementation. | ||||
| CtnPtpPortDSConfigEncapType | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.16 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The encapsulation type to transport PTP for the PTP port: 1: UDP/IPv4 per IEEE1588-2008 Annex D 2: UDP/IPv6 per IEEE1588-2008 Annex D 3: Ethernet per IEEE1588-2008 Annex F. | ||||
| CtnPtpPortDSConfigAddressingMode | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.17 | Integer32 | RC | |
column · Integer32 · read-create · current Indicates addressing mode of the PTP message in
the PTP port:
- 0: Multicast for all PTP messages
- 1: Unicast for all PTP messages with the
provisioned destination address.
- 2: Hybrid mode. The Delay_Req and Delay_Resp
messages are sent with the unicast address
while other PTP messages are sent with the
multicast address. | ||||
| CtnPtpPortDSConfigUnicastForDelayReq | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.18 | TruthValue | RC | deprecated |
column · TruthValue · read-create · deprecated Indicates how the Delay_Req message is sent in
the PTP port regarding the destination address.
This parameter is valid only when
tnPtpPortAddressingMode is Multicast
true: The port sends the Delay_Req message with
unicast address.
false: The port sends the Delay_Req message with
multicast address. | ||||
| CtnPtpPortDSConfigUnicastNegotiation | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current An administrative value indicating whether the unicast negotiation function is enabled or disabled for the PTP port. It is valid when tnPtpPortAddressingMode is Multicast. true: Unicast negotiation is enabled. false: Unicast negotiation is disabled. | ||||
| CtnPtpPortDSConfigDestMac | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.20 | MacAddress | RC | |
column · MacAddress · read-create · current The unicast destination MAC address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 3 ) and (tnPtpPortAddressingMode == 1). | ||||
| CtnPtpPortDSConfigDestIpAddrType | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.21 | InetAddressType | RC | |
column · InetAddressType · read-create · current The parameter indicates the IP address type for tnPtpPortDSConfigDestIpAddr. | ||||
| CtnPtpPortDSConfigDestIpAddr | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.22 | InetAddress | RC | |
column · InetAddress · read-create · current The unicast destination IPv4/IPv6 address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 1 or 2) and (tnPtpPortAddressingMode == 1). | ||||
| CtnPtpPortDSConfigRowStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.23 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus of the PTP Port entry. | ||||
| CtnPtpPortDSConfigConnectedPtpioTimingPort | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The timing port of the PTPIO card which this PTP port is connected to. It has the same value as 'ifIndex' of the card's port table. To unconnect a PTP port from a PTPIO timing port, set this parameter to 0. | ||||
| CtnPtpPortDSConfigAutoLinkAsyMeasureTrigger | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.25 | TruthValue | RC | |
column · TruthValue · read-create · current The action to trigger automatic link asymmetry measurement. true - trigger automatic link asymmetry measurement false - no action. | ||||
| CtnPtpPortDSConfigNotSlave | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26 | TruthValue | RC | |
column · TruthValue · read-create · current An administrative value indicating whether the ptp port can be placed in the SLAVE state. | ||||
| CtnPtpPortDSConfigLocalPriority | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.27 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The localPriority value of the PTP port. | ||||
| CtnPtpPortDSConfigAssociatedEntityType | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.28 | Unsigned32 (0..3) | RC | |
column · Unsigned32 (0..3) · read-create · current Indicates the Associated Entity Type of the PTP port. 0: N/A, NOT Applicable 1: Physical PORT 2: Service 3: ERP Ring | ||||
| CtnPtpPortDSConfigAssociatedEntityID | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.29 | OCTET STRING (SIZE (8)) | RC | |
column · OCTET STRING (SIZE (8)) · read-create · current Indicates the Associated Entity ID(8-byte) of the PTP port. The first 4-byte is shelfId/slotId/0/0. The last 4-byte is portId or serviceId or ringId depends on tnPtpPortDSConfigAssociatedEntityType. | ||||
| CtnPtpPortDSConfigClearMsgCounter | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.30 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Clears the Message Counter of the PTP port. The 32-bit value is defined as below: +----------+----------------------------+ | 32 11 | 10 1 | +----------+----------------------------+ | reserved | message type and direction | +----------+----------------------------+ Bit 1 to bit 10 for type and direction of the message counter to be cleared. Set one or more bits to 1 to clear specified message counters. bit 1 - AnnounceTx bit 2 - AnnounceRx bit 3 - SyncTx bit 4 - SyncRx bit 5 - DelayReqTx bit 6 - DelayReqRx bit 7 - DelayRespTx bit 8 - DelayRespRx bit 9 - FollowUpTx bit 10 - FollowUpRx Other bits (bit 11 to bit 32) are reserved for future, and suggest to be 0. | ||||
| CtnPtpPortDSConfigSyncReceiptTimeout | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.31 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The number of timeout intervals for the PTPPort sync message. The total time in seconds to timeout is calculated by tnPtpPortDSConfigSyncReceiptTimeout * ( 2 ^ tnPtpPortDSConfigLogSyncInterval ). | ||||
| CtnPtpPortDSConfigDelayRespReceiptTimeout | 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.32 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The number of timeout intervals for the PTPPort DelayResponse message. The total time in seconds to timeout is calculated by tnPtpPortDSConfigDelayRespReceiptTimeout * ( 2 ^ tnPtpPortDSConfigLogDelayReqInterval ). | ||||
| TtnPtpPortDSInfoTable | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3 | NA | ||
table · not-accessible · current This table contains non-configurable information of a PTP port | ||||
| RtnPtpPortDSInfoEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1 | NA | ||
row · not-accessible · current Non-configurable information of a PTP port. | ||||
| CtnPtpPortDSInfoPeerPathDelay | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current It's an estimate of the current one-way propagation delay on the link attached to the PTP port. The unit is ns. This attribute is valid only when tnPtpPortDSConfigDelayMechanism = p2p. | ||||
| CtnPtpPortDSInfoPortOperState | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.2 | AluWdmtnPtpPortState | RO | |
column · AluWdmtnPtpPortState · read-only · current The state of the PTP port. | ||||
| CtnPtpPortDSInfoNumOfSessions | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.3 | Integer32 | RO | deprecated |
column · Integer32 · read-only · deprecated The parameter indicates the number of the active sessions of the PTP port. | ||||
| CtnPtpPortDSInfoAutoLinkAsyMeasureStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The parameter indicates the state of the automatic measurement trigger. 0 - noTrigger 1 - inProgress 2 - successful 3 - noMsgReceived 4 - noMsgReceivedAfterSwap 5 - oswFailure 6 - unstable timestamps. | ||||
| CtnPtpPortDSInfoMeasuredLinkAsymmetry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The parameter indicates the measured delay asymmetry of the PTP port. It is valid only when tnPtpPortDSInfoAutoMeasureStatus = 1. | ||||
| CtnPtpPortDSInfoAnnounceMsgTx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Announce packets transmitted to this port. | ||||
| CtnPtpPortDSInfoAnnounceMsgRx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Announce packets received from this port. | ||||
| CtnPtpPortDSInfoSyncMsgTx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Sync packets transmitted to this port. | ||||
| CtnPtpPortDSInfoSyncMsgRx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Sync packets received from this port. | ||||
| CtnPtpPortDSInfoDelayReqMsgTx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Delay Request packets transmitted to this port. | ||||
| CtnPtpPortDSInfoDelayReqMsgRx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Delay request packets received from this port. | ||||
| CtnPtpPortDSInfoDelayRspMsgTx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Delay response packets transmitted to this port. | ||||
| CtnPtpPortDSInfoDelayRspMsgRx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Delay response packets received from this port. | ||||
| CtnPtpPortDSInfoSignalingMsgTx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Signaling packets transmitted to this port. | ||||
| CtnPtpPortDSInfoSignalingMsgRx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Signaling packets received from this port. | ||||
| CtnPtpPortDSInfoManagementMsgTx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Management packets transmitted to this port. | ||||
| CtnPtpPortDSInfoManagementMsgRx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of Management packets received from this port. | ||||
| CtnPtpPortDSInfoFollowUpMsgTx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of FollowUp packets transmitted to this port. | ||||
| CtnPtpPortDSInfoFollowUpMsgRx | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of FollowUp packets received from this port. | ||||
| CtnPtpPortDSInfoPhyPortMac | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.20 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of the associated physical port. | ||||
| CtnPtpPortDSInfoSignalFail | 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.21 | TruthValue | RO | |
column · TruthValue · read-only · current PTPPort Signal Fail Flag. | ||||
| TtnPtpPortGenericTable | 1.3.6.1.4.1.7483.2.2.4.9.1.3.5 | NA | ||
table · not-accessible · current This table provides generic information for a PTP port. | ||||
| RtnPtpPortGenericEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1 | NA | ||
row · not-accessible · current Generic information for a PTP port. | ||||
| CtnPtpPortAlmProfName | 1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1.1 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current ASAP(alarm severity assignment profile) Name for PTP port. | ||||
| CtnPtpPortIsVirtual | 1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current This PTPPort is a Virtual PTPPort(associated with ToD port) or NOT. | ||||
| TtnPtpTransparentClockPortDSTable | 1.3.6.1.4.1.7483.2.2.4.9.1.3.6 | NA | ||
table · not-accessible · current This table provides the data set of Transparent Clock PTP port. Refer to 8.3.3 transparentClockPortDS data set member specifications. | ||||
| RtnPtpTransparentClockPortDSEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1 | NA | ||
row · not-accessible · current Data set of the PTP port of Transparent Clock. | ||||
| CtnPtpTransparentClockPortDSPortIdentity | 1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.1 | AluWdmPtpPortIdentity | RO | |
column · AluWdmPtpPortIdentity · read-only · current The PortIdentity attribute of the PTP port. | ||||
| CtnPtpTransparentClockPortDSFaultyFlag | 1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current The value shall be TRUE if the PTP port is faulty and FALSE if the PTP port is operating normally. The initialization value shall be FALSE. | ||||
| TtnPtpPortSourceInfoDSTable | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7 | NA | ||
table · not-accessible · current This table provides the Source Information DataSet of a PTP port, to participate the Best Master Clock Comparison. | ||||
| RtnPtpPortSourceInfoDSEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1 | NA | ||
row · not-accessible · current Source Information DataSet of a Virtual PTP port. | ||||
| CtnPtpPortSourceInfoDSGmClockIdentity | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.1 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current PTPPort Source Information GM ClockIdentity. | ||||
| CtnPtpPortSourceInfoDSGmClockClass | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information GM ClockClass. | ||||
| CtnPtpPortSourceInfoDSGmClockAccuracy | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information GM ClockAccuracy. | ||||
| CtnPtpPortSourceInfoDSGmOffsetScaledLogVariance | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information GM OffsetScaledLogVariance. | ||||
| CtnPtpPortSourceInfoDSGmPriority1 | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information GM Priority1. | ||||
| CtnPtpPortSourceInfoDSGmPriority2 | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information GM Priority2. | ||||
| CtnPtpPortSourceInfoDSStepsRemoved | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information StepsRemoved. | ||||
| CtnPtpPortSourceInfoDSReceiverClockIdentity | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.8 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current PTPPort Source Information Receiver ClockIdentity. | ||||
| CtnPtpPortSourceInfoDSReceiverPortNumber | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information Receiver PortNumber. | ||||
| CtnPtpPortSourceInfoDSSenderClockIdentity | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.10 | AluWdmPtpClockIdentifier | RO | |
column · AluWdmPtpClockIdentifier · read-only · current PTPPort Source Information Sender ClockIdentity. | ||||
| CtnPtpPortSourceInfoDSSenderPortNumber | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information Sender PortNumber. | ||||
| CtnPtpPortSourceInfoDSTimeSource | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information TimeSource. | ||||
| CtnPtpPortSourceInfoDSTimeScale | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current PTPPort Source Information TimeScale. | ||||
| CtnPtpPortSourceInfoDSLocalPriority | 1.3.6.1.4.1.7483.2.2.4.9.1.3.7.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current PTPPort Source Information LocalPriority. | ||||
| TtnVirtualPtpPortTable | 1.3.6.1.4.1.7483.2.2.4.9.1.3.8 | NA | ||
table · not-accessible · current This table provides parameters for a Virtual PTP port. | ||||
| RtnVirtualPtpPortEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1 | NA | ||
row · not-accessible · current Parameters for a Virtual PTP port. | ||||
| CtnVirtualPtpPortGmPriority1 | 1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1.1 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current Virtual PTPPort grandmasterPriority1. | ||||
| CtnVirtualPtpPortGmPriority2 | 1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1.2 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current Virtual PTPPort grandmasterPriority2. | ||||
| CtnVirtualPtpPortGmClockAccuracy | 1.3.6.1.4.1.7483.2.2.4.9.1.3.8.1.3 | Unsigned32 (32..33) | RC | |
column · Unsigned32 (32..33) · read-create · current Virtual PTPPort grandmasterClockAccuracy. | ||||
| NtnPtpExtTodIf | 1.3.6.1.4.1.7483.2.2.4.9.1.4 | |||
| TtnPtpExtTodIfTable | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1 | NA | ||
table · not-accessible · current This table contains parameters of the external 1PPS/ToD interfaces. | ||||
| RtnPtpExtTodIfEntry | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1 | NA | ||
| CtnPtpExtTodIfIndex | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The index of the 1pps/ToD interface. It contains the shelf, slot and port number information and is equal to the ifIndex of the ifTable. | ||||
| CtnPtpExtTodIfDirection | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.2 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The direction of the 1PPS&ToD interface. 0: Input (to the node) 1: Output (from the node). | ||||
| CtnPtpExtTodSignalValid | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current This parameter enables/disables the ToD signal of the 1PPS&ToD interface. true: The ToD signal is enabled. false: The ToD signal is disabled. | ||||
| CtnPtpExtTodIfPulseFormat | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The format for the 1PPS signal of the 1PPS&ToD interface. 0: 1 pulse per second 1: 1 pulse per minute 2: 1 pulse per hour. | ||||
| CtnPtpExtTodIfToDFormat | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.5 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The format for the ToD signal of the 1PPS&ToD interface 0: UBX 1: IRIG-B 2: IRIG-D 3: ITU-T This parameter is valid only when tnPtpExtTodSignalValid is true. | ||||
| CtnPtpExtTodIfCableCorrection | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The compensation value of the cable for the
1PPS&ToD interface.
Value range: {-100ms, +100ms}.
The unit of this attribute shall be ns and the
steps of this attribute shall be 1ns. | ||||
| CtnPtpExtTodIfAdminStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The Admin status of the 1PPS&ToD interface. 0: Disable 1: Enable. | ||||
| CtnPtpExtTodIf1ppsStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The operational status of the 1PPS signal of the 1PPS&ToD interface. 1: Normal 2: Loss. This parameter is valid only when tnPtpExtTodIfDirection is input. | ||||
| CtnPtpExtTodIfToDStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The operational status of the ToD signal of the 1PPS&ToD interface. 1: Normal 2: Degraded 3: Do Not used (default) 4: Loss 256: N/A - NotApplicable. | ||||
| CtnPtpExtTodIfAdditionalInfo | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.10 | OCTET STRING (SIZE (0..48)) | RO | |
column · OCTET STRING (SIZE (0..48)) · read-only · current The additional information for the 1PPS&ToD interface. | ||||
| CtnPtpExtCompensationMode | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current This parameter determines the PTP Compensation mode. It is intended to be managed by the System Operator. 0: precalibrated mode 1: auto mode 2: manual mode | ||||
| CtnPtpExtCompenAutoTestTrigger | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current This parameter enables/disables Compensation AutoTest true: enabled Compensation AutoTest. false: disabled Compensation AutoTest. | ||||
| CtnPtpExtCompenManualValueIn | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.13 | Integer32 | RC | |
column · Integer32 · read-create · current The compensation manual value in for the
1PPS&ToD interface.
Value range: {-127ns, +127ns}.
The unit of this attribute shall be ns. | ||||
| CtnPtpExtCompenManualValueOut | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.14 | Integer32 | RC | |
column · Integer32 · read-create · current The compensation manual value out for the
1PPS&ToD interface.
Value range: {-127ns, +127ns}.
The unit of this attribute shall be ns. | ||||
| CtnPtpExtCompenMeasureStatus | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current This parameter indicate the the status of automatical calibration measurement 0: noTrigger 1: inProgress 2: successful 2: failed. | ||||
| CtnPtpExtTodIfDegradeThreshold | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.16 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The Threshold value to raise ToD Degrade(TODDEG). For IEEE_1588_2008_CCSA profile, Range: 0 to 5; Default: 0. For G_8275_1 profile, valid values are 6, 7, 135, 140, 150, 160, 165, 248; Default: 6. | ||||
| CtnPtpExtTodIfTodClockClass | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.17 | Unsigned32 (0..256) | RO | |
column · Unsigned32 (0..256) · read-only · current The ClockClass of the ToD signal with itu ToD message format type. Valid values are: 0..255: ClockClass 256: N/A - NotApplicable. | ||||
| CtnPtpExtTodAlmProfName | 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.18 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current . | ||||
| NtnPtpConformance | 1.3.6.1.4.1.7483.2.2.4.9.2 | |||
| NtnPtpGroups | 1.3.6.1.4.1.7483.2.2.4.9.2.1 | |||
| GtnPtpSystemGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.1 | |||
group · current PTP system information for the card. | ||||
| GtnPtpClockDefaultDSConfigGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.2 | |||
group · current Configurable information for a PTP clock.
| ||||
| GtnPtpClockDefaultDSInfoGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.3 | |||
group · current Non-configurable information for a PTP clock. | ||||
| GtnPtpClockCurrentDSGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.4 | |||
group · current Operational information for a PTP clock. | ||||
| GtnPtpClockParentDSGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.5 | |||
group · current Parent clock information for a PTP clock.
| ||||
| GtnPtpClockTimePropertiesDSGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.6 | |||
group · current Time properties information for a PTP clock.
| ||||
| GtnPtpPortNextIndexGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.7 | |||
| GtnPtpPortDSConfigGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.8 | |||
group · current Configurable information for a PTP port.
| ||||
| GtnPtpPortDSInfoGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.9 | |||
group · current Non-configurable information for a PTP port.
| ||||
| GtnPtpExtTodIfGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.11 | |||
group · current Information for an external 1PPS&ToD port.
| ||||
| GtnPtpClockPathTraceDSGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.12 | |||
group · current Path Trace Data Set of a PTP Clock. | ||||
| GtnPtpClockSyncOamGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.13 | |||
group · current PTP Clock Sync OAM.
| ||||
| GtnPtpClockGenericGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.14 | |||
| GtnPtpTransparentClockDefaultDSGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.15 | |||
group · current Table for the Default Data Set of Transparent Clock. | ||||
| GtnPtpPortGenericGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.16 | |||
| GtnPtpTransparentClockPortDSGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.17 | |||
group · current Table for the Data Set of Transparent Clock PTP port. | ||||
| GtnPtpPortSourceInfoDSGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.18 | |||
group · current .
| ||||
| GtnVirtualPtpPortGroup | 1.3.6.1.4.1.7483.2.2.4.9.2.1.19 | |||
group · current . | ||||
| NtnPtpCompliances | 1.3.6.1.4.1.7483.2.2.4.9.2.2 | |||
| MtnPtpCompliance | 1.3.6.1.4.1.7483.2.2.4.9.2.2.1 | |||
compliance · current .
| ||||
Textual conventions
AluWdmPtpClockIdentifierOCTET STRING (SIZE (8))This 64-bit extended unique identifier (EUI-64) is a constructed by the external MAC address of the card and the clock number in the card. For example, if the external MAC address is AC-DE-48-23-45-67, and the clock number is 0x01. The clock identifier shall be: | company_id | fixed |clockNum| extension identifier | field | AC | DE | 48 | FF | 01 | 23 | 45 | 67 | hex 10101100 11011110 01001000 11111111 00000001 00100011 01000101 01100111 bits | | | | | most-significant-byte least-significant-byte | most-significant-bit least-significant-bit.
AluWdmPtpClockIndexInteger32 (1..2147483647)The clock index of an PTP clock. A PTP clock has a unique index in a NE. The clock index consists of the following three parts: - Part_1: the highest byte with shelf index - Part_2: the next byte with slot index - Part_3: the next byte with clock number (start from 1) in the card 32 25 | 24 17 | 16 9 | 8 1 | +--- --+--------+---------+-------+ |shelf | slot | clock | unused| +------+------- +---------+-------+AluWdmPtpPortIdentityOCTET STRING (SIZE (10))This 80-bit extended unique PortIdentity is constructed by 64-bit ClockIdentity + 16-bit portNumber. For example, if the ClockIdentity is AC-DE-48-FF-01-23-45-67 and the port number is 0x0003, the PortIdentity shall be: | company_id | fixed |clockNum| extension identifier | port number | field | AC | DE | 48 | FF | 01 | 23 | 45 | 67 | 00 | 03 | hex 10101100 11011110 01001000 11111111 00000001 00100011 01000101 01100111 00000000 00000011 bits | | | | | most-significant-byte least-significant-byte | most-significant-bit least-significant-bit.
AluWdmPtpRecoveredClockStateINTEGERacquiring(2)freeRun(1)holdover(4)locked(5)phasetracking(3)unknown(0)The state of the PTP clock.
AluWdmtnPtpPortStateINTEGERdisabled(3)faulty(2)initializing(1)listening(4)master(6)masterOriented(65537)passive(7)premaster(5)slave(9)slaveOriented(65538)tcFaulty(65539)uncalibrated(8)unknown(0)The state of the PTP port.
InetAddressOCTET STRING (SIZE (0..255))Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. The InetAddressType object which defines the context must be registered immediately before the object which uses the InetAddress textual convention. In other words, the object identifiers for the InetAddressType object and the InetAddress object MUST have the same length and the last sub-identifier of the InetAddressType object MUST be 1 less than the last sub-identifier of the InetAddress object. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, STD 58. In this case, the OBJECT-TYPE declaration MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers.
InetAddressTypeINTEGERdns(16)ipv4(1)ipv6(2)unknown(0)A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address which is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. The InetAddressType textual convention SHOULD NOT be subtyped in object type definitions to support future extensions. It MAY be subtyped in compliance statements in order to require only a subset of these address types for a compliant implementation.
Groups and compliance
- tnPtpClockCurrentDSGroup
- tnPtpClockDefaultDSConfigGroup
- tnPtpClockDefaultDSInfoGroup
- tnPtpClockGenericGroup
- tnPtpClockParentDSGroup
- tnPtpClockPathTraceDSGroup
- tnPtpClockSyncOamGroup
- tnPtpClockTimePropertiesDSGroup
- tnPtpCompliance
- tnPtpExtTodIfGroup
- tnPtpPortDSConfigGroup
- tnPtpPortDSInfoGroup
- tnPtpPortGenericGroup
- tnPtpPortNextIndexGroup
- tnPtpPortSourceInfoDSGroup
- tnPtpSystemGroup
- tnPtpTransparentClockDefaultDSGroup
- tnPtpTransparentClockPortDSGroup
- tnVirtualPtpPortGroup