TROPIC-AMPLIFIER-MIB
Nokia (Formerly 'Alcatel-Lucent')Amplifier MIB types.
snmptranslate -m TROPIC-AMPLIFIER-MIB -Tpsnmpwalk -v2c -c <community> -m TROPIC-AMPLIFIER-MIB <host> 1.3.6.1.4.1.7483.1.1.2.2.3.4Imports
| IF-MIB | InterfaceIndexOrZero, ifIndex |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| TROPIC-GLOBAL-REG | tnAmplifierMIB, tnCardModules |
| TROPIC-SHELF-MIB | tnShelfIndex |
| TROPIC-SLOT-MIB | tnSlotIndex |
| TROPIC-TC | NokiaAmpPortTargetPowerWidth, TnCommand |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ItnAmplifierMibModule | 1.3.6.1.4.1.7483.1.1.2.2.3.4 | ||||||||||||||||||||
identity Amplifier MIB types. | |||||||||||||||||||||
| NtnAmplifierConf | 1.3.6.1.4.1.7483.2.2.3.7.1 | ||||||||||||||||||||
| NtnAmplifierGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1 | ||||||||||||||||||||
| NtnAmplifierPortConfigGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1 | ||||||||||||||||||||
| GtnAmplifierPortConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.1 | ||||||||||||||||||||
| GtnAmplifierPortConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.2 | ||||||||||||||||||||
group · current .
| |||||||||||||||||||||
| GtnAmplifierHybridPortConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.3 | ||||||||||||||||||||
| GtnAmplifierHybridPortConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.1.4 | ||||||||||||||||||||
| NtnAmplifierPortInfoGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2 | ||||||||||||||||||||
| GtnAmplifierPortInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.1 | ||||||||||||||||||||
| GtnAmplifierPortInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.2 | ||||||||||||||||||||
group · current .
| |||||||||||||||||||||
| GtnAmplifierMeshPortInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.3 | ||||||||||||||||||||
| GtnAmplifierMeshPortInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.4 | ||||||||||||||||||||
group · current . | |||||||||||||||||||||
| GtnAmplifierHybridPortInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.5 | ||||||||||||||||||||
| GtnAmplifierHybridPortInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.2.6 | ||||||||||||||||||||
| NtnAmplifierCardInfoGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3 | ||||||||||||||||||||
| GtnAmplifierCardInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.1 | ||||||||||||||||||||
| GtnAmplifierCardInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.2 | ||||||||||||||||||||
group · current .
| |||||||||||||||||||||
| GtnAmplifierMeshCardInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.3 | ||||||||||||||||||||
| GtnAmplifierMeshCardInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.4 | ||||||||||||||||||||
| GtnAmplifierHybridCardInfoScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.5 | ||||||||||||||||||||
| GtnAmplifierHybridCardInfoGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.3.6 | ||||||||||||||||||||
group · current .
| |||||||||||||||||||||
| NtnAmplifierCardConfigGroups | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4 | ||||||||||||||||||||
| GtnAmplifierCardConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.1 | ||||||||||||||||||||
| GtnAmplifierCardConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.2 | ||||||||||||||||||||
group · current .
| |||||||||||||||||||||
| GtnAmplifierMeshCardConfigScalarsGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.3 | ||||||||||||||||||||
| GtnAmplifierMeshCardConfigGroup | 1.3.6.1.4.1.7483.2.2.3.7.1.1.4.4 | ||||||||||||||||||||
| NtnAmplifierCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2 | ||||||||||||||||||||
| NtnAmplifierPortConfigCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.1 | ||||||||||||||||||||
| MtnAmplifierPortConfigCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.1.1 | ||||||||||||||||||||
compliance · current . | |||||||||||||||||||||
| NtnAmplifierPortInfoCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.2 | ||||||||||||||||||||
| MtnAmplifierPortInfoCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.2.1 | ||||||||||||||||||||
| NtnAmplifierCardInfoCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.3 | ||||||||||||||||||||
| MtnAmplifierCardInfoCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.3.1 | ||||||||||||||||||||
| NtnAmplifierCardConfigCompliances | 1.3.6.1.4.1.7483.2.2.3.7.1.2.4 | ||||||||||||||||||||
| MtnAmplifierCardConfigCompliance | 1.3.6.1.4.1.7483.2.2.3.7.1.2.4.1 | ||||||||||||||||||||
compliance · current . | |||||||||||||||||||||
| NtnAmplifierPortConfig | 1.3.6.1.4.1.7483.2.2.3.7.4 | ||||||||||||||||||||
| StnAmplifierPortConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.4.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierPortConfigTable. | |||||||||||||||||||||
| TtnAmplifierPortConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The provisioned ports on an amplifier card. | |||||||||||||||||||||
| RtnAmplifierPortConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1 | NA | |||||||||||||||||||
| CtnAmplifierPortPowerGain | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.1 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current The following description applies to the signal port of the amplifier card: Current configurable ranges and defaults: A2325A: (1600..3200), 1600 A2P2125 (port 1): ( 200..2000), 1000 A2P2125 (port 4): (1500..3100), 1500 A4PSWG (port 1): ( 700..2900), 700 A4PSWG (port 4): ( 200..2000), 1000 AA2DONW: (1300..2300), 1300 AAR_8A: (1000..2000), 1500 AHPHG: (1300..3300), 1300 AHPLG: ( 600..2400), 600 ALPFGK: (1300..2300), 1800 ALPFGT: (1300..2300), 1800 ALPHG: (1000..3000), 1000 AM2017B: ( 600..2400), 600 AM2032A: (2600..4000), 2600 AM2125A: (1500..3100), 1500 AM2125B: (1500..3100), 1500 AM2318A: ( 700..2400), 700 AM2325B: (1600..3200), 1600 AM2625A: (1600..3000), 1600 ASWG: ( 700..2900), 700 MESH4: ( 700..2400), 700 RA2P: ( 200..2000), 1000.
| |||||||||||||||||||||
| CtnAmplifierPortPowerGainMin | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.2 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current The following description applies to the signal port of the amplifier card: This value is used by power management. Current configurable ranges and defaults: A2325A: (1600..3200), 1600 A2P2125 (port 1): ( 0..2500), 700 A2P2125 (port 4): (1500..3100), 1500 A4PSWG (port 1): ( 0..2500), 700 A4PSWG (port 4): ( 700..2900), 700 AA2DONW: (1300..2300), 1300 AHPHG: (1300..3300), 1300 AHPLG: ( 600..2400), 600 ALPFGK: (1300..2300), 1300 ALPFGT: (1300..2300), 1300 ALPHG: (1000..3000), 1000 AM2017B: ( 600..2400), 600 AM2032A: (2600..4000), 2600 AM2125A: (1500..3100), 1500 AM2125B: (1500..3100), 1500 AM2318A: ( 700..2400), 700 AM2325B: (1600..3200), 1600 AM2625A: (1600..3000), 1600 ASWG: ( 700..2900), 700 MESH4: ( 700..2400), 700 RA2P: ( 0..2500), 700.
| |||||||||||||||||||||
| CtnAmplifierPortPowerGainMax | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.3 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current The following description applies to the signal port of the amplifier card: This value is used by power management. Current configurable ranges and defaults: A2325A: (1600..3200), 3200 A2P2125 (port 1): ( 0..2500), 2500 A2P2125 (port 4): (1500..3100), 3100 A4PSWG (port 1): ( 0..2500), 2500 A4PSWG (port 4): ( 700..2900), 2200 AA2DONW: (1300..2300), 2300 AHPHG: (1300..3300), 3300 AHPLG: ( 600..2400), 2400 ALPFGK: (1300..2300), 2300 ALPFGT: (1300..2300), 2300 ALPHG: (1000..3000), 3000 AM2017B: ( 600..2400), 2400 AM2032A: (2600..4000), 4000 AM2125A: (1500..3100), 3100 AM2125B: (1500..3100), 3100 AM2318A: ( 700..2400), 2400 AM2325B: (1600..3200), 3200 AM2625A: (1600..3000), 3000 ASWG: ( 700..2900), 2200 MESH4: ( 700..2400), 2400 RA2P: ( 0..2500), 2500.
| |||||||||||||||||||||
| CtnAmplifierPortPowerGainBackoff | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.4 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current The following description applies to the signal port of the amplifier card: The adjustment made to min/max gain by power management when commissioning. Current configurable range: 0 to 1000.
| |||||||||||||||||||||
| CtnAmplifierPortEnable | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.5 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current The following description applies to the signal port of the amplifier card: This attribute allows a network operator to kick start the laser. Setting a value of false is restricted. | |||||||||||||||||||||
| CtnAmplifierPortAutoReEnableMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.6 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current The following description applies to the ampOutThruIn port of the amplifier card: Auto re-enable mode. | |||||||||||||||||||||
| CtnAmplifierPortPowerSpanRepairMargin | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The following description applies to the signal port of the amplifier card: EPT - splice margin. This is calculated as the absolute value of the difference between tnAmplifierPortPowerGainMax and tnAmplifierPortPowerGainBackoff. Current ranges and defaults: ASWG: (700..2900), 2200 A4PSWG: (700..2900), 2200.
| |||||||||||||||||||||
| CtnAmplifierPortPowerDeltaMax | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.9 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current The following description applies to the signal port of the amplifier card: EPT - delta max. Current configurable range: 0 to 500.
| |||||||||||||||||||||
| CtnAmplifierPortTargetTilt | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.10 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current The following description applies to the signal port of the amplifier card: EPT - Tilt. Configurable ranges and defaults: A2325A: (-300.. 0), 0 A2P2125: (-300.. 300), 0 A2P2125: (-400.. 400), 0 AHPHG: (-300.. 0), 0 AHPLG: (-300.. 0), 0 ALPHG: (-300.. 0), 0 AM2017B: (-300.. 0), 0 AM2032A: (-300.. 0), 0 AM2125A: (-400.. 400), 0 AM2125B: (-400.. 400), 0 AM2318A: (-400.. 400), 0 AM2325B: (-300.. 0), 0 AM2625A: (-600..-100), -100 MESH4: (-400.. 400), 0 RA2P: (-300.. 300), 0 ASWG: (-400.. 400), 0 A4PSWG: (-400.. 400), 0.
| |||||||||||||||||||||
| CtnAmplifierPortFunction | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the functional type of the amplifier card.
| |||||||||||||||||||||
| CtnAmplifierPortAprDisable | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.12 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current The Auto Power Recovery Disable. | |||||||||||||||||||||
| CtnAmplifierPortSRSTiltACoeffDCM | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.13 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Modeling coefficient for the SRSTilt = A*Pout(mW) equation, for DCM. Current configurable range: 0 to 10000. | |||||||||||||||||||||
| CtnAmplifierPortMaxFlatGainOffset | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.14 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Provides a correction to the assumed max flat gain value. Current configurable range: -500 to 500.
| |||||||||||||||||||||
| CtnAmplifierPortGainTilt | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Current OA tilt setting for the signal port of the amplifier card. Current ranges: AM2625A: -600 to -100 AM2032A: -300 to 0 ASWG: -400 to 400 A4PSWG: -400 to 400.
| |||||||||||||||||||||
| CtnAmplifierPortAprHoldOffTime | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.16 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The auto power recovery hold off time.
| |||||||||||||||||||||
| CtnAmplifierPortLosMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.17 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The Amplifier Port LOS Mode.
| |||||||||||||||||||||
| CtnAmplifierPortSignalFailThreshold | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.18 | Unsigned32 (0..12) | RC | ||||||||||||||||||
column · Unsigned32 (0..12) · read-create · current Integer range 4 to 5, representing 10**4 to 10**5. Current configurable range: 4 to 5. | |||||||||||||||||||||
| CtnAmplifierPortSignalDegradeThreshold | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.19 | Unsigned32 (0..12) | RC | ||||||||||||||||||
column · Unsigned32 (0..12) · read-create · current Integer range 5 to 9, representing 10**5 to 10**9. Current configurable range: 5 to 9. | |||||||||||||||||||||
| CtnAmplifierPortVoaSet | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.20 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current The following description applies to the LINEOUT port of the uni-directionalamplifier card: Current configurable range: 0 to 1800.
| |||||||||||||||||||||
| CtnAmplifierPortGainRange | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.21 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Gain range for ASWG/A4PSWG cards.
| |||||||||||||||||||||
| CtnAmplifierPortAprMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.22 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current APR Mode for ASWG/A4PSWG cards.
| |||||||||||||||||||||
| CtnAmplifierPortOperatingMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.23 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current ASE Mode for ASWG/A4PSWG cards. Set to power (node sets LD to LOSN as well) Set to gain (node sets LD to LOSA as well).
| |||||||||||||||||||||
| CtnAmplifierPortSignalPowerTarget | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.24 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Value used when tnAmplifierPortOperatingMode is in power mode. Current configurable range: -400 to 1000.
| |||||||||||||||||||||
| CtnAmplifierPortPowerGainL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.25 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Specifies the amplifier gain.
| |||||||||||||||||||||
| CtnAmplifierPortPowerGainMinL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.26 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Specifies the minimum EDFA gain.
| |||||||||||||||||||||
| CtnAmplifierPortPowerGainMaxL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.27 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Specifies the maximum EDFA gain.
| |||||||||||||||||||||
| CtnAmplifierPortPowerDeltaMaxL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.28 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Specifies the maximum allowed difference between the provisioned gain and the measured gain before an alarm is raised.
| |||||||||||||||||||||
| CtnAmplifierPortGainRangeL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.29 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Specifies the EDFA gain range..
| |||||||||||||||||||||
| CtnAmplifierPortTargetTiltL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.30 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Specifies the amplifier tilt value used by the system.
| |||||||||||||||||||||
| CtnAmplifierPortVoaSetL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.31 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Specifies the output VOA setting.
| |||||||||||||||||||||
| CtnAmplifierPortGainTiltL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.32 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Current OA tilt setting for the signal port of the amplifier card for L band.
| |||||||||||||||||||||
| CtnAmplifierPortPowerGainBackoffL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.33 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current The following description applies to the signal port of the amplifier card for L band: The adjustment made to min/max gain by power management when commissioning. Current configurable range: 0 to 1000.
| |||||||||||||||||||||
| CtnAmplifierPortPowerSpanRepairMarginL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.34 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The following description applies to the signal port of the amplifier card for L Band: EPT - splice margin. This is calculated as the absolute value of the difference between tnAmplifierPortPowerGainMaxL and tnAmplifierPortPowerGainBackoffL.
| |||||||||||||||||||||
| CtnAmplifierPortOperatingModeL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.35 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current ASE Mode for ASWG/A4PSWG cards for L-Band. Set to power (node sets LD to LOSN as well) Set to gain (node sets LD to LOSA as well).
| |||||||||||||||||||||
| CtnAmplifierPortSignalPowerTargetL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.36 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Value used when tnAmplifierPortOperatingModeL is in power mode for L-Band. Current configurable range: -400 to 1000.
| |||||||||||||||||||||
| CtnAmplifierPortUserSelectedExteriorDcmPresentIn | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.37 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current Manage external DCM. | |||||||||||||||||||||
| CtnAmplifierPortUserSelectedExteriorDcmPresentOut | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.38 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current Manage external DCM. | |||||||||||||||||||||
| CtnAmplifierPortBandMode | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.39 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This attribute determines if the LD is operating in a single or dual band. If in a single band mode, only the provisioned band attributes are made availabe to provision and retrieve.
| |||||||||||||||||||||
| CtnAmplifierPortLosModeL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.40 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The Amplifier Port LOS Mode in L band.
| |||||||||||||||||||||
| CtnAmplifierPortBoosterTargetPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.41 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Target Power Per Channel. Current configurable range: -500 to 600.
| |||||||||||||||||||||
| CtnAmplifierPortAprEDFApulse | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.42 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current APR EDFA Pulsing.
| |||||||||||||||||||||
| CtnAmplifierPortLineDcmConnAddress | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.43 | InterfaceIndexOrZero | RC | ||||||||||||||||||
column · InterfaceIndexOrZero · read-create · current . | |||||||||||||||||||||
| CtnAmplifierPortAPREDFAPulseAttempt | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.44 | TnCommand | RC | ||||||||||||||||||
column · TnCommand · read-create · current APR pulse attempt. | |||||||||||||||||||||
| CtnAmplifierPortSpanLossTh | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.45 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Span loss threshold .
| |||||||||||||||||||||
| CtnAmplifierPortAsellLink | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.46 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current . | |||||||||||||||||||||
| CtnAmplifierPortTargetPowerWidth | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.47 | NokiaAmpPortTargetPowerWidth | RC | ||||||||||||||||||
column · NokiaAmpPortTargetPowerWidth · read-create · current . | |||||||||||||||||||||
| CtnAmplifierPortTargetPowerWidthL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.48 | NokiaAmpPortTargetPowerWidth | RC | ||||||||||||||||||
column · NokiaAmpPortTargetPowerWidth · read-create · current . | |||||||||||||||||||||
| CtnAmplifierPortAsellLinkL | 1.3.6.1.4.1.7483.2.2.3.7.4.2.1.49 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current . | |||||||||||||||||||||
| StnAmplifierHybridPortConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.4.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierHybridPortConfigTable. | |||||||||||||||||||||
| TtnAmplifierHybridPortConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.4.4 | NA | |||||||||||||||||||
table · not-accessible · current The provisioned ports on an hybrid amplifier card. | |||||||||||||||||||||
| RtnAmplifierHybridPortConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1 | NA | |||||||||||||||||||
| CtnAmplifierHybridPortVoaAttenuation | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.1 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Hybrid amplifier port VOA attenuation. Current configurable range: 0 to 2000.
| |||||||||||||||||||||
| CtnAmplifierHybridPortInitialMidLoss | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.2 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Hybrid amplifier port initial VOA attenuation. Current configurable range: 0 to 2000.
| |||||||||||||||||||||
| CtnAmplifierHybridPortInitialAgcTargetGain | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.3 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Hybrid amplifier port initial AGC target gain. Current configurable range: 200 to 2000.
| |||||||||||||||||||||
| CtnAmplifierHybridPortVoaMinAttenuation | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.4 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Hybrid amplifier port VOA minimum attenuation. Current configurable range: 0 to 2000.
| |||||||||||||||||||||
| CtnAmplifierHybridPortVoaMaxAttenuation | 1.3.6.1.4.1.7483.2.2.3.7.4.4.1.5 | Unsigned32 | RC | ||||||||||||||||||
column · Unsigned32 · read-create · current Hybrid amplifier port VOA maximum attenuation. Current configurable range: 0 to 2000.
| |||||||||||||||||||||
| NtnAmplifierPortInfo | 1.3.6.1.4.1.7483.2.2.3.7.5 | ||||||||||||||||||||
| StnAmplifierPortInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.5.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierPortInfoTable. | |||||||||||||||||||||
| TtnAmplifierPortInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The equipped ports on an amplifier card. | |||||||||||||||||||||
| RtnAmplifierPortInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1 | NA | |||||||||||||||||||
| CtnAmplifierPortInternalAmpModuleTemperature | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the signal port of the amplifier card: The temperature of the laser. Current range: -5 to 35.
| |||||||||||||||||||||
| CtnAmplifierPortPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.2 | Integer32 | RO | -378 | |||||||||||||||||
column · Integer32 · read-only · current The following description applies to the fromDcm and line ports of the amplifier card: The total input power Current ranges: ASWG: -9900, -3600 to 1700 A4PSWG: -9900, -3600 to 1700.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.3 | Integer32 | RO | 1126 | |||||||||||||||||
column · Integer32 · read-only · current The following description applies to the signal and toDcm ports of the amplifier card: The total output power. Current ranges: AM2625A: -9900, -900 to 2900 AM2032A: -9900, -300 to 2300 ASWG: -9900, -1100 to 2550 A4PSWG: -9900, -1100 to 2550.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortSignalPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.4 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current The following description applies to the signal port of the amplifier card: The total input power plus the programmed gain. Current Ranges: ASWG: -9900, -1100 to 2550 A4PSWG: -9900, -1100 to 2550.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortInputToOutputGain | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.5 | Integer32 | RO | 1790 | |||||||||||||||||
column · Integer32 · read-only · current The following description applies to the LINEOUT port of the uni-directional amplifier card. Current Ranges: ASWG: -9900, -300 to 2900 A4PSWG: -9900, -300 to 2900.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortDCMInPower | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.6 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current The following description applies to the DCM In port of the amplifier card. -9900 indicates no measured power. Current range: -9900, -3000 to 2000.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortDCMOutPower | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.7 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current The following description applies to the DCM Out port of the amplifier card. -9900 indicates no measured power. Current range: -9900, -3000 to 2000.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortActualTilt | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.8 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current The following description applies to the signal port of the amplifier card: Current range: -1000 to 500.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortWtOcmMonitorPortOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.9 | Unsigned32 | RO | 16909312 | |||||||||||||||||
column · Unsigned32 · read-only · current The associated WTOCM In port associated to the LD. Current range: 0 to 0xFFFFFFFF. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortOSCTxPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The EDFA module OSC transmitted input power of the amplifier card. -9900 indicates no measured power. Current ranges: A2P2125: -1500 to 1100 AM2032A: -1500 to 1100 AM2125A: -1500 to 1100 AM2125B: -1500 to 1100 AM2318A: -1500 to 1100 AM2625A: -2000 to 1100 ASWG: -1500 to 1100 A4PSWG: -1500 to 1100.
| |||||||||||||||||||||
| CtnAmplifierPortOSCTxPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The EDFA module OSC transmitted output power of the amplifier card. -9900 indicates no measured power. Current ranges: A2P2125: -1500 to 1100 AA2DONW: -1500 to 1500 AM2032A: -1500 to 1100 AM2125A: -1500 to 1100 AM2125B: -1500 to 1100 AM2318A: -1500 to 1100 AM2625A: 0 to 1500 ASWG: -1500 to 1100 A4PSWG: -1500 to 1100.
| |||||||||||||||||||||
| CtnAmplifierPortTestingActive | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.12 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current Node sets to true when testing in progress on port (logic). | |||||||||||||||||||||
| CtnAmplifierCommonEgressOutputPower | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Calculated in scot when tiltadj is triggered.Referes to the Target output power per channel,adjusted for the C+L Interaction.
| |||||||||||||||||||||
| CtnAmplifierActOutAtten | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Actual amplifier attenuation available on the AWBxx packs only.
| |||||||||||||||||||||
| CtnAmplifierCommonEgressOutputPowerL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Calculated in scot when tiltadj is triggered.Referes to the Target output power per channel,adjusted for the C+L Interaction.
| |||||||||||||||||||||
| CtnAmplifierActOutAttenL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.16 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Actual amplifier attenuation available on the AWBxx packs only for L Band.
| |||||||||||||||||||||
| CtnAmplifierPortActualTiltL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the signal port of the amplifier card for L band: Current range: -1000 to 500.
| |||||||||||||||||||||
| CtnAmplifierPortSignalPowerOutL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the signal port of the amplifier card for L band: The total input power plus the programmed gain.
| |||||||||||||||||||||
| CtnAmplifierPortInputToOutputGainL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.19 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the LINEOUT port of the uni-directional amplifier card for L band.
| |||||||||||||||||||||
| CtnAmplifierPortOSCTxPowerOutL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.20 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The EDFA module OSC transmitted output power of the amplifier card. -9900 indicates no measured power.
| |||||||||||||||||||||
| CtnAmplifierPortPowerInL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current EDFA module total input power L band.
| |||||||||||||||||||||
| CtnAmplifierPortInfoOSCRxPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.22 | Integer32 | RO | -8325 | |||||||||||||||||
column · Integer32 · read-only · current The EDFA module OSC received input power to the card. -9900 indicates no measured power.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortInfoOSCSfpTxPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.23 | Integer32 | RO | 271 | |||||||||||||||||
column · Integer32 · read-only · current The OSCSFP transceiver output power -9900 indicates no measured power.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortInfoOSCSfpRxPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.24 | Integer32 | RO | -9900 | |||||||||||||||||
column · Integer32 · read-only · current The OSCSFP transceiver input power -9900 indicates no measured power.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtnAmplifierPortBoosterTargetPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.25 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Target Power Per Channel.
| |||||||||||||||||||||
| CtnAmplifierPortPowerOutL | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.26 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Total output power for L Band.
| |||||||||||||||||||||
| CtnAmplifierPortSpanLoss | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.27 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Span loss.
| |||||||||||||||||||||
| CtnAmplifierPortAprEDFApulsePower | 1.3.6.1.4.1.7483.2.2.3.7.5.2.1.28 | Unsigned32 | RO | 1200 | |||||||||||||||||
column · Unsigned32 · read-only · current Apr EDFA pulse Power. Example values from LibreNMS test devices
| |||||||||||||||||||||
| StnAmplifierMeshPortInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.5.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierMeshPortInfoTable. | |||||||||||||||||||||
| TtnAmplifierMeshPortInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.5.4 | NA | |||||||||||||||||||
table · not-accessible · current The equipped ports on a mesh card. | |||||||||||||||||||||
| RtnAmplifierMeshPortInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1 | NA | |||||||||||||||||||
| CtnAmplifierMeshPortPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the output port of the mesh card: The total output power. -9900 indicates no measured power.
| |||||||||||||||||||||
| CtnAmplifierMeshPortSignalPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the output port of the mesh card: The total input power plus the programmed gain. -9900 indicates no measured power.
| |||||||||||||||||||||
| CtnAmplifierMeshPortInputToOutputGain | 1.3.6.1.4.1.7483.2.2.3.7.5.4.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description reports the gain from sigIn to sigOut ports of the MESH4 card: OA module gain - EVOA loss - SEEPROM loss of splitter. Current range: MESH4: -1100 to 2400.
| |||||||||||||||||||||
| StnAmplifierHybridPortInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.5.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierHybridPortInfoTable. | |||||||||||||||||||||
| TtnAmplifierHybridPortInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.5.6 | NA | |||||||||||||||||||
table · not-accessible · current The equipped ports on an hybrid amplifier card. | |||||||||||||||||||||
| RtnAmplifierHybridPortInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.5.6.1 | NA | |||||||||||||||||||
| CtnAmplifierHybridPortInternalAmpModuleTemperature | 1.3.6.1.4.1.7483.2.2.3.7.5.6.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Hybrid Amplifier Port Internal Module Temperature.
| |||||||||||||||||||||
| NtnAmplifierCardInfo | 1.3.6.1.4.1.7483.2.2.3.7.6 | ||||||||||||||||||||
| StnAmplifierCardInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.6.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierCardInfoTable. | |||||||||||||||||||||
| TtnAmplifierCardInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.6.2 | NA | |||||||||||||||||||
table · not-accessible · current The equipped pumps and other values on an amplifier card. | |||||||||||||||||||||
| RtnAmplifierCardInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1 | NA | |||||||||||||||||||
| CtnAmplifierCardOAMPump1Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 1.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump2Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 2.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump3Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 3.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump1Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 1.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump2Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 2.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump3Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 3.
| |||||||||||||||||||||
| CtnAmplifierCardOptIntSpanLoss | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The span loss value. Current range: 0 to 9900.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump4Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 4.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump5Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 5.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump6Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 6.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump4Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 4.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump5Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 5.
| |||||||||||||||||||||
| CtnAmplifierCardOAMPump6Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 6.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump1Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 1 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump2Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 2 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump3Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 3 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump4Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 4 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump1Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 1 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump2Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.19 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 2 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump3Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.20 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 3 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAMLPump4Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 4 for L Band.
| |||||||||||||||||||||
| CtnAmplifierCardOAM1PumpTemperatures | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.22 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current String containing number of pumps for the 1st optical amplifier on the card, followed by the pump temperature for each pump. For IROADM9R OAM1 is the ingress OA module. | |||||||||||||||||||||
| CtnAmplifierCardOAM2PumpTemperatures | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.23 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current String containing number of pumps for the 2nd OA module on the card, followed by the pump temperature for each pump. For IROADM9R OAM2 is the egress OA module. | |||||||||||||||||||||
| CtnAmplifierCardOAM1PumpBiases | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.24 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current String containing number of pumps for the 1st optical amplifier on the card, followed by the pump bias current for each pump. For IROADM9R OAM1 is the ingress OA module. | |||||||||||||||||||||
| CtnAmplifierCardOAM2PumpBiases | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.25 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current String containing number of pumps for the 2nd optical amplifier on the card, followed by the pump bias current for each pump. For IROADM9R OAM2 is the egress OA module. | |||||||||||||||||||||
| CtnAmplifierCardOAM3PumpTemperatures | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.26 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current String containing number of pumps for the 3rd OA module on the card, followed by the pump temperature for each pump. | |||||||||||||||||||||
| CtnAmplifierCardOAM3PumpBiases | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.27 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current String containing number of pumps for the 3rd optical amplifier on the card, followed by the pump bias current for each pump. | |||||||||||||||||||||
| CtnAmplifierCardOAM1LPumpTemperatures | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.28 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current . | |||||||||||||||||||||
| CtnAmplifierCardOAM2LPumpTemperatures | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.29 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current . | |||||||||||||||||||||
| CtnAmplifierCardOAM3LPumpTemperatures | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.30 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current . | |||||||||||||||||||||
| CtnAmplifierCardOAM1LPumpBiases | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.31 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current . | |||||||||||||||||||||
| CtnAmplifierCardOAM2LPumpBiases | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.32 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current . | |||||||||||||||||||||
| CtnAmplifierCardOAM3LPumpBiases | 1.3.6.1.4.1.7483.2.2.3.7.6.2.1.33 | SnmpAdminString (SIZE (0..512)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..512)) · read-only · current . | |||||||||||||||||||||
| StnAmplifierMeshCardInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.6.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierMeshCardInfoTable. | |||||||||||||||||||||
| TtnAmplifierMeshCardInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.6.4 | NA | |||||||||||||||||||
table · not-accessible · current The measured values on an amplifier module in a mesh card. | |||||||||||||||||||||
| RtnAmplifierMeshCardInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1 | NA | |||||||||||||||||||
| CtnAmplifierMeshCardInternalTemperature | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the amplifier module in the mesh card: The temperature of the laser. Current range: MESH4: -5 to 35.
| |||||||||||||||||||||
| CtnAmplifierMeshCardPowerIn | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the input port of the amplifier module in the mesh card: The total input power. -9900 indicates no measured power.
| |||||||||||||||||||||
| CtnAmplifierMeshCardPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the output port of the amplifier module in the mesh card: The total output power. -9900 indicates no measured power.
| |||||||||||||||||||||
| CtnAmplifierMeshCardSignalPowerOut | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the output port of the amplifier module in the mesh card: The total input power plus the programmed gain. -9900 indicates no measured power.
| |||||||||||||||||||||
| CtnAmplifierMeshCardInputToOutputGain | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the output port of the amplifier module in the mesh card: Current range: MESH4: -1100 to 2400.
| |||||||||||||||||||||
| CtnAmplifierMeshCardGainTilt | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Current OA tilt setting for the output port of the amplifier module in the mesh card.
| |||||||||||||||||||||
| CtnAmplifierMeshCardActualTilt | 1.3.6.1.4.1.7483.2.2.3.7.6.4.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The following description applies to the output port of the amplifier module in the mesh card: Current range: MESH4: -1000 to 500.
| |||||||||||||||||||||
| StnAmplifierHybridCardInfoAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.6.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierHybridCardInfoTable. | |||||||||||||||||||||
| TtnAmplifierHybridCardInfoTable | 1.3.6.1.4.1.7483.2.2.3.7.6.6 | NA | |||||||||||||||||||
table · not-accessible · current The measured values on an amplifier module in a mesh card. | |||||||||||||||||||||
| RtnAmplifierHybridCardInfoEntry | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1 | NA | |||||||||||||||||||
| CtnAmplifierHybridCardOAMPump1Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 1.
| |||||||||||||||||||||
| CtnAmplifierHybridCardOAMPump2Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 2.
| |||||||||||||||||||||
| CtnAmplifierHybridCardOAMPump1Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 1.
| |||||||||||||||||||||
| CtnAmplifierHybridCardOAMPump2Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 2.
| |||||||||||||||||||||
| CtnAmplifierHybridCardOAMPump3Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 3.
| |||||||||||||||||||||
| CtnAmplifierHybridCardOAMPump4Temperature | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current temperature of the OA Laser Pump 4.
| |||||||||||||||||||||
| CtnAmplifierHybridCardOAMPump3Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 3.
| |||||||||||||||||||||
| CtnAmplifierHybridCardOAMPump4Bias | 1.3.6.1.4.1.7483.2.2.3.7.6.6.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current bias of the OA Laser Pump 4.
| |||||||||||||||||||||
| NtnAmplifierCardConfig | 1.3.6.1.4.1.7483.2.2.3.7.7 | ||||||||||||||||||||
| StnAmplifierCardConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.7.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierCardConfigTable. | |||||||||||||||||||||
| TtnAmplifierCardConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.7.2 | NA | |||||||||||||||||||
table · not-accessible · current The configurable values on an amplifier card. | |||||||||||||||||||||
| RtnAmplifierCardConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1 | NA | |||||||||||||||||||
| CtnAmplifierCardOptIntDetection | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.1 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The status of the Optical Intrusion detection feature.
| |||||||||||||||||||||
| CtnAmplifierCardOptIntBaseline | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.2 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current The optical intrusion baseline value, with -100 means no value has been set. Current configurable range: -100, 100 to 5000.
| |||||||||||||||||||||
| CtnAmplifierCardOptIntLossThreshold | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.3 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current The optical intrusion loss threshold value. Current configurable range: 100 to 500.
| |||||||||||||||||||||
| CtnAmplifierCardOptIntPollPeriod | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.4 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current The optical intrusion poll period. Current configurable range: 20 to 120.
| |||||||||||||||||||||
| CtnAmplifierCardOptIntClearAlarm | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.5 | TnCommand | RC | ||||||||||||||||||
column · TnCommand · read-create · current Clears optical intrusion alarm. | |||||||||||||||||||||
| CtnAmplifierCardAsonAddDropPlannedForOps | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.6 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current Used for ASON nodes running GMRE. The value indicates if an LD defining the add/drop block has been planned to accept OPSA OCH protected services. | |||||||||||||||||||||
| CtnAmplifierCardUsage | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current .
| |||||||||||||||||||||
| CtnAmplifierCardAsonAddDropPlannedForOpsLBand | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.8 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current L Band. Used for ASON nodes running GMRE. The value indicates if an LD defining the add/drop block has been planned to accept OPSA OCH protected services. | |||||||||||||||||||||
| CtnAmplifierCardOptIntAson | 1.3.6.1.4.1.7483.2.2.3.7.7.2.1.9 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Enables or disables ason monitoring of the optical instrusion monitoring. on - enables ASON monitoring off - disables ASON monitoring.
| |||||||||||||||||||||
| StnAmplifierMeshCardConfigAttributeTotal | 1.3.6.1.4.1.7483.2.2.3.7.7.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total number of attributes in tnAmplifierMeshCardConfigTable. | |||||||||||||||||||||
| TtnAmplifierMeshCardConfigTable | 1.3.6.1.4.1.7483.2.2.3.7.7.4 | NA | |||||||||||||||||||
table · not-accessible · current The provisioned parameters on an amplifier module in a mesh card. | |||||||||||||||||||||
| RtnAmplifierMeshCardConfigEntry | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1 | NA | |||||||||||||||||||
| CtnAmplifierMeshCardPowerGain | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.1 | Unsigned32 (700..2400) | RC | ||||||||||||||||||
column · Unsigned32 (700..2400) · read-create · current The following description applies to the output port of the amplifier module in the mesh card: Current configurable range: MESH4: 700 to 2400.
| |||||||||||||||||||||
| CtnAmplifierMeshCardPowerGainMin | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.2 | Unsigned32 (700..2400) | RC | ||||||||||||||||||
column · Unsigned32 (700..2400) · read-create · current The following description applies to the output port of the amplifier module in the mesh card: This value is used by power management. Current configurable range: MESH4: 700 to 2400.
| |||||||||||||||||||||
| CtnAmplifierMeshCardPowerGainMax | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.3 | Unsigned32 (700..2400) | RC | ||||||||||||||||||
column · Unsigned32 (700..2400) · read-create · current The following description applies to the output port of the amplifier module in the mesh card: This value is used by power management. Current configurable range: MESH4: 700 to 2400.
| |||||||||||||||||||||
| CtnAmplifierMeshCardTargetTilt | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.4 | Integer32 (-400..400) | RC | ||||||||||||||||||
column · Integer32 (-400..400) · read-create · current The following description applies to the output port of the amplifier module in the mesh card: EPT - Tilt. Current configurable range: MESH4: -400 to 400.
| |||||||||||||||||||||
| CtnAmplifierMeshCardVoaSet | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.5 | Unsigned32 (0..1800) | RC | ||||||||||||||||||
column · Unsigned32 (0..1800) · read-create · current The following description applies to the output port of the amplifier module in the mesh card: Current configurable range: MESH4: 0 to 1800.
| |||||||||||||||||||||
| CtnAmplifierMeshCardCommonEgressPower | 1.3.6.1.4.1.7483.2.2.3.7.7.4.1.6 | Integer32 (-1000..1000) | RC | ||||||||||||||||||
column · Integer32 (-1000..1000) · read-create · current Common Egress Power. This is the per channel default egress power Current configurable range: MESH4: -1000 to 1000.
| |||||||||||||||||||||
Groups and compliance
- tnAmplifierCardConfigCompliance
- tnAmplifierCardConfigGroup
- tnAmplifierCardConfigScalarsGroup
- tnAmplifierCardInfoCompliance
- tnAmplifierCardInfoGroup
- tnAmplifierCardInfoScalarsGroup
- tnAmplifierHybridCardInfoGroup
- tnAmplifierHybridCardInfoScalarsGroup
- tnAmplifierHybridPortConfigGroup
- tnAmplifierHybridPortConfigScalarsGroup
- tnAmplifierHybridPortInfoGroup
- tnAmplifierHybridPortInfoScalarsGroup
- tnAmplifierMeshCardConfigGroup
- tnAmplifierMeshCardConfigScalarsGroup
- tnAmplifierMeshCardInfoGroup
- tnAmplifierMeshCardInfoScalarsGroup
- tnAmplifierMeshPortInfoGroup
- tnAmplifierMeshPortInfoScalarsGroup
- tnAmplifierPortConfigCompliance
- tnAmplifierPortConfigGroup
- tnAmplifierPortConfigScalarsGroup
- tnAmplifierPortInfoCompliance
- tnAmplifierPortInfoGroup
- tnAmplifierPortInfoScalarsGroup