MIB Browser
This document is the SNMP MIB module for the SNMP Textual
Conventions (TCs) used in the Nokia SROS manageability
instrumentation.

This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property.  Nokia retains
all title and ownership in the Specification, including any
revisions.

Nokia grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Nokia
products, and without fee, provided this copyright notice and
license appear on all copies.

This Specification is supplied `as is', and Nokia
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.
Organization
Nokia
Root OID
1.3.6.1.4.1.7483.5.1.2
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m TN-TC-MIB -Tp
snmpwalk -v2c -c <community> -m TN-TC-MIB <host> 1.3.6.1.4.1.7483.5.1.2

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION
TROPIC-GLOBAL-REGtnModules

OID tree

NameOIDTypeAccessStatus
ItnTCMIBModule1.3.6.1.4.1.7483.5.1.2

Textual conventions

BgpPeeringStatus INTEGER

duplicatePeer(10) genError(12) hostInactive(6) installed(1) invalidRadiusAttr(8) maxPeersReached(11) noDualHomingSupport(7) noDynamicPeerGroup(9) noEnhancedSubmgt(3) notApplicable(0) notInstalled(2) parentItfDown(5) wrongAntiSpoof(4)

The status of the BGP peering session.
Dot1PPriority Integer32 (-1 | 0..7)
IEEE 802.1p priority.  zero is lowest, seven is highest.
-1 means not set
Dot1PPriorityMask Integer32 (0..7)
IEEE 802.1p priority mask.  zero is lowest, seven is highest.
InterfaceIndex Integer32

Display hint: d

A unique value, greater than zero, for each interface
or interface sub-layer in the managed system.  It is
recommended that values are assigned contiguously
starting from 1.  The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization.
IpAddressPrefixLength Integer32 (0..32)
the number of bits to match in an IP address mask.
QTag Integer32 (1..4094)
The QTag data type is a 12-bit integer tag used to identify
a service.  The values 0 and 4095 are not allowed.
QTagFullRange Unsigned32 (0..4095)
The data type QTagFullRange represents a VLAN tag.
A VLAN tag is 12 bits is size. The data type QTagFullRange covers the
whole range of possible values. (0..4095 or 0x0 .. 0xFFF)
QTagFullRangeOrNone Integer32 (-1 | 0..4095)
The data type QTagFullRangeOrNone represents a VLAN tag.
A VLAN tag is 12 bits is size. The data type QTagFullRange covers the
whole range of possible values. (0..4095 or 0x0 .. 0xFFF).

The value '-1' indicates the absense of a VLAN tag.
QTagOrZero Unsigned32 (0..4094)
The data type QTagOrZero represents a VLAN tag.

The value '0' indicates that no VLAN tag is provisioned, or that its value
is unknown.
SapLoopbackMode INTEGER

disabled(1) facility(3) terminal(2)

SapLoopbackMode data type is an enumerated integer that
describes the values used to identify the loopback
mode of a sap.
SdpBindId OCTET STRING (SIZE (8))
The value used to uniquely identify an SDP Binding.
The first four octets correspond to the zero-extended
16-bit SDP ID, while the remaining four octets
correspond to the 32-bit VC ID, both encoded in network
byte order.
ServObjDesc DisplayString (SIZE (0..80))
ASCII string used to describe various service
objects.
ServiceAccessPoint Integer32 (-1 | 0..255)
802.2 LLC SAP value, Source and Destination.
ServiceAdminStatus INTEGER

down(2) up(1)

ServiceAdminStatus data type is an enumerated integer that
describes the values used to identify the administrative
state of a service.
ServiceOperStatus INTEGER

down(2) up(1)

ServiceOperStatus data type is an enumerated integer that
describes the values used to identify the current operational
state of a service.
TAdaptationRule INTEGER

closest(3) max(1) min(2)

The adaptation rule to be applied to calcluate the operational values
for the specified entity.
TAdaptationRuleOverride INTEGER

closest(3) max(1) min(2) noOverride(0)

The adaptation rule to be applied to calcluate the operational values
for the specified entity.
TAdvCfgRate Integer32 (0..100000000)
The PIR rate to be used in kbps.
TAtmTdpDescrType INTEGER

clp0And1pcr(0) clp0And1pcrPlusClp0And1scr(1) clp0And1pcrPlusClp0scr(2) clp0And1pcrPlusClp0scrTag(3)

The TAtmTdpDescrType is an enumerated integer whose value
 indicates the types of cell loss priority to be used in
 conjunction with traffic parameters.

The following values are outlined:
  Integer Value               Interpretation
  -------------               ------------------------
  clp0And1pcr                 PCR applies to CLP 0 and
                              CLP 1 cell flows
  clp0And1pcrPlusClp0And1scr  PCR applies to CLP 0 and
                              CLP 1 cell flows.
                              SCR applies to CLP 0 and
                              CLP 1 cell flows.
  clp0And1pcrPlusClp0scr      PCR applies to CLP 0 and
                              CLP 1 cell flows.
                              SCR applies to CLP 0 cell flows.
  clp0And1pcrPlusClp0scrTag   PCR applies to CLP 0 and
                              CLP 1 cell flows.
                              SCR applies to CLP 0 cell flows.
TBWRateType INTEGER

kbps(1) percentLocalLimit(3) percentPortLimit(2)

The type of the PIR/CIR percent rate. The value 'kbps' means the rate is
specified in kbps. The value 'percentPortLimit' means the rate is
specified in percentage of port limit. The value 'percentLocalLimit'
means the rate is specified in percentage of local limit.
TBurstHundredthsOfPercent Integer32 (0..10000)
The percentage of buffer space assigned to a queue that is
reserved for some purpose, defined to two decimal places.
TBurstLimit Integer32 (-1 | 1..14000000)
An explicit shaping burst size for a queue.
The value of -1 specifies system default value.
TBurstPercent Integer32 (0..100)
The percentage of buffer space assigned to a queue that is
reserved for some purpose.
TBurstPercentOrDefault Integer32 (-1 | 0..100)
The percentage of buffer space assigned to a queue that is
reserved for some purpose.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
TBurstPercentOrDefaultOverride Integer32 (-2 | -1 | 0..100)
The percentage of buffer space assigned to a queue that is
reserved for some purpose.

The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.

A value of -2 specifies no override.
TBurstSize Integer32 (-1 | 0..131072)
The amount of buffer space (in kbytes) assigned to a queue.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
TBurstSizeBytes Integer32 (-1 | 0..134217728)
The amount of buffer space (in bytes) assigned to a queue.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
TBurstSizeBytesOverride Integer32 (-2 | -1 | 0..134217728)
The amount of buffer space (in bytes) assigned to a queue.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
A value of -2 specifies no override.
TBurstSizeOverride Integer32 (-2 | -1 | 0..131072)
The amount of buffer space (in kbytes) assigned to a queue.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
A value of -2 specifies no override.
TCIRPercentOverride Integer32 (-2 | 0..10000)
The CIR percentage rate specified in hundredths of a percent.
A value of -2 specifies no override.
TCIRRate Integer32 (-1 | 0..100000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
TCIRRateOverride Integer32 (-2 | -1 | 0..100000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
A value of -2 specifies no override.
TClassBurstLimit Integer32 (-1 | 1..327680)
An explicit shaping burst size for a class. The value -1 means that the
actual value is derived from the corresponding class's default value.
TCpmProtPolicyID Unsigned32 (0..255)
The data type TCpmProtPolicyID represents the identification number
of a CPM Protection policy.

The value '0' indicates that no CPM Protection policy is provisioned.
TCpmProtPolicyIDOrDefault Integer32 (-1 | 1..255)
The data type TCpmProtPolicyIDOrDefault represents the identification number
of a CPM Protection policy.

The value of '-1' indicates the system determined default value.
TDEProfile INTEGER

de(3) in(1) out(2)

This textual-convention specifies the profile marking of a packet.

Value of 'in' specifies the in-profile marking.

Value of 'out' specifies the out-profile marking.

Value of 'de' specifies that the profile marking will be based on the DE
(Drop-Eligible) bit.  DE bit-value of '0' specifies in-profile and DE
bit value of '1' specifies out-profile marking.
TDEProfileOrDei INTEGER

de(3) in(1) out(2) use-dei(13)

This textual-convention specifies the profile marking of a packet.

Value of 'in' specifies the in-profile marking.

Value of 'out' specifies the out-profile marking.

Value of 'de' specifies that the profile marking will be based on the DE
(Drop-Eligible) bit.  DE bit-value of '0' specifies in-profile and DE
bit value of '1' specifies out-profile marking.
TDEValue Integer32 (-1 | 0..1)
This textual-convention specifies the DE (Drop Eligible) bit value.
The value of '-1' means DE value is not specified.
TDSCPFilterActionValue Integer32 (-1 | 0..255)
The value of a Differential Services Code Point. -1 means not set.
TDSCPName TNamedItem
The name of a Differential Services Code Point value.
TDSCPNameOrEmpty TNamedItemOrEmpty
The name of a Differential Services Code Point value.
TDSCPValue Integer32 (0..63)
The value of a Differential Services Code Point.
TDSCPValueOrNone Integer32 (-1 | 0..63)
The value of a Differential Services Code Point (DSCP). A value
of -1 means that no DSCP value is configured or available.
TDirection INTEGER

both(0) egress(2) ingress(1)

TDirection denotes a direction.
TEgrHsmdaPerPacketOffsetOvr Integer32 (-128 | -32..31)
The value, in bytes, of the override of the adjustment to make
to the size of each outgoing packet for accounting.
A value of -128 indicates no override.
TEgrPolicerId Integer32 (1..8)
The data type describes the QoS control policer identifier on
egress side.
TEgrPolicerIdOrNone Integer32 (0 | 1..8)
The data type describes the QoS control policer identifier on
egress side or zero when not specified.
TEgrRateModType INTEGER

aggRateLimit(2) namedScheduler(3) none(1)

The data type TEgrRateModType represents the type of egress-rate
modification that is to be applied.
TEgressHsmdaCounterId Unsigned32 (1..8)
The identifcation number of a HSMDA egress counter.
TEgressHsmdaCounterIdOrZero Unsigned32 (0 | 1..8)
The identifcation number of a HSMDA egress counter.
The value 0 indicates an undefined counter id.
TEgressHsmdaPerPacketOffset Integer32 (-32..31)
The value, in bytes, of the adjustment to make to the size of each
outgoing packet for accounting.
TEgressHsmdaQueueId Integer32 (0 | 1..8)
The value of TEgressHsmdaQueueId specifies the identification number
of a HSMDA egress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TEgressHsmdaQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TEgressQPerPacketOffset Integer32 (-64..32)
The value, in bytes, of the adjustment to make to the size of each
packet for accounting.
TEgressQueueId Integer32 (0 | 1..8)
The value of TEgressQueueId specifies the identification number
of an egress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TEgressQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TEntryId TEntryIndicator (1..65535)
uniquely identifies an entry in a policy or filter table.
to facilitate insertion of entries in the tables, we recommend
assigning entry IDs by 10s:  10, 20, 30, etc.
TEntryIndicator Unsigned32 (0..65535)
Uniquely identifies an entry in a policy or filter table. The
value 0 is not a valid entry-id. When used as insertion point
the value 0 indicates that entries must be inserted at the very
beginning, i.e.before the first entry defined.
TExpSecondaryShaperClassRate Integer32 (-1 | 1..10000000)
The expanded secondary shaper class PIR rate to be used in Kbps.
The value -1 means maximum rate.
TExpSecondaryShaperPIRRate Integer32 (-1 | 1..10000000)
The expanded secondary shaper PIR rate to be used in Kbps.
The value -1 means maximum rate.
TFCName TNamedItem
The name of a Forwarding Class entry.
TFCNameOrEmpty TNamedItemOrEmpty
The name of a Forwarding Class entry.
TFCSet Bits

af(2) be(0) ef(5) h1(6) h2(4) l1(3) l2(1) nc(7)

This data type describes a set of Forwarding Classes.
TFCType INTEGER

af(2) be(0) ef(5) h1(6) h2(4) l1(3) l2(1) nc(7)

This data type enumerates the Forwarding Classes.
TFIRRate Integer32 (-1 | 1..100000000)
The static fair rate to be used in kbps. The value -1 means maximum
rate.
TFdbTableSizeProfileID Unsigned32 (1..7)
The identification number of a Fdb Table Size profile.
TFilterID Unsigned32 (0..65535)

Display hint: d

the identification number of a filter. 0 indicates an invalid
filter-id.
TFrameType INTEGER

atm(5) e802dot2LLC(1) e802dot2SNAP(2) e802dot3(0) ethernetII(3)

The type of the frame for which this mac filter match criteria is
defined.
THPolCIRRate Integer32 (-1 | 0..20000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
THPolCIRRateOverride Integer32 (-2 | -1 | 0..20000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
A value of -2 specifies no override.
THPolPIRRate Integer32 (-1 | 1..20000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
THPolPIRRateOverride Integer32 (-2 | -1 | 1..20000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
A value of -2 specifies no override.
THPolVirtualScheCIRRate Integer32 (-1 | 0..800000000)
The CIR rate to be used in kbps. The value -1 means maximum rate.
THPolVirtualSchePIRRate Integer32 (-1 | 1..800000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
THSMDABurstSizeBytes Integer32 (-1 | 0..2688000)
The amount of buffer space (in bytes) assigned to a HSMDA queue.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
THSMDABurstSizeBytesOverride Integer32 (-2 | -1 | 0..2688000)
The amount of buffer space (in bytes) assigned to a HSMDA queue.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
A value of -2 specifies no override.
THSMDAQueueBurstLimit Integer32 (-1 | 1..1000000)
An explicit shaping burst size of a HSMDA queue. The value -1 means
that the actual value is derived from the corresponding queue's
default value.
THsmdaCIRKRate Integer32 (-1 | 0..100000000)
The HSMDA CIR rate to be used in Kbps. The value -1 means maximum rate.
THsmdaCIRKRateOverride Integer32 (-2 | -1 | 0..100000000)
The HSMDA CIR rate to be used in Kbps. The value -1 means maximum rate.
A value of -2 specifies no override.
THsmdaCIRMRate Integer32 (-1 | 0..100000)
The HSMDA CIR rate to be used in Mbps. The value -1 means maximum rate.
THsmdaCIRMRateOverride Integer32 (-2 | -1 | 0..100000)
The HSMDA CIR rate to be used in Mbps. The value -1 means maximum rate.
A value of -2 specifies no override.
THsmdaCounterIdOrZero Unsigned32 (0 | 1..8)
The identifcation number of a HSMDA  counter.
The value 0 indicates an undefined counter id.
THsmdaCounterIdOrZeroOrAll Integer32 (-1 | 0 | 1..8)
The identifcation number of a HSMDA  counter.
The value (0) indicates an undefined counter id.
The value (-1) is used to indicate all counters.
THsmdaPIRKRate Integer32 (-1 | 1..100000000)
The HSMDA PIR rate to be used in Kbps. The value -1 means maximum rate.
THsmdaPIRKRateOverride Integer32 (-2 | -1 | 1..100000000)
The HSMDA PIR rate to be used in Kbps. The value -1 means maximum rate.
A value of -2 specifies no override.
THsmdaPIRMRate Integer32 (-1 | 1..100000)
The HSMDA PIR rate to be used in Mbps. The value -1 means maximum rate.
THsmdaPIRMRateOverride Integer32 (-2 | -1 | 1..100000)
The HSMDA PIR rate to be used in Mbps. The value -1 means maximum rate.
A value of -2 specifies no override.
THsmdaPolicyIncludeQueues INTEGER

q1to2(1) q1to3(2)

The value of THsmdaPolicyIncludeQueues specifies which queues are to be
scheduled in the same class in a HSMDA scheduler.
THsmdaPolicyScheduleClass Integer32 (1..3)
The value of THsmdaPolicyScheduleClass the class at which the queues
specified by THsmdaPolicyIncludeQueues in a HSMDA scheduler.
THsmdaSchedulerPolicyGroupId Integer32 (0 | 1..2)
The value of THsmdaSchedulerPolicyGroupId specifies the identification
number of a HSMDA scheduler policy group.  A value of zero (0)
indicates that no specific group identification has been assigned for
this object. When an object of type THsmdaSchedulerPolicyGroupId is
an SNMP table index, an index value of zero (0) is not allowed and a
noCreation error will be returned.
THsmdaWeight Integer32 (1..100)
The weight of the specified HSMDA entity while feeding into the parent.
THsmdaWeightClass INTEGER

class1(1) class2(2) class4(4) class8(8)

The weight of the specified HSMDA entity while feeding into the parent.
THsmdaWeightOverride Integer32 (-2 | 1..100)
The weight of the specified HSMDA entity while feeding into the parent.
A value of -2 specifies no override.
THsmdaWrrWeight Integer32 (1..32)
The weight of the specified HSMDA entity while feeding into the parent.
THsmdaWrrWeightOverride Integer32 (-2 | 1..32)
The weight of the specified HSMDA entity while feeding into the parent.
A value of -2 specifies no override.
TIPFilterID Unsigned32 (0..65535)

Display hint: d

the identification number of an IP filter.
TIngHsmdaPerPacketOffsetOvr Integer32 (-128 | -32..31)
The value, in bytes, of the override of the adjustment to make
to the size of each incoming packet for accounting.
A value of -128 indicates no override.
TIngPolicerId Integer32 (1..32)
The data type describes the QoS control policer identifier on
ingress side.
TIngPolicerIdOrNone Integer32 (0 | 1..32)
The data type describes the QoS control policer identifier on
ingress side or zero when not specified.
TIngressHsmdaCounterId Unsigned32 (1..8)
The identifcation number of a HSMDA ingress counter.
TIngressHsmdaCounterIdOrZero Unsigned32 (0 | 1..8)
The identifcation number of a HSMDA ingress counter.
The value 0 indicates an undefined counter id.
TIngressHsmdaPerPacketOffset Integer32 (-32..31)
The value, in bytes, of the adjustment to make to the size of each
incoming packet for accounting.
TIngressHsmdaQueueId Integer32 (0 | 1..8)
The value of TIngressHsmdaQueueId specifies the identification number
of a HSMDA ingress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TIngressHsmdaQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TIngressMeterId Integer32 (0 | 1..32)
Ingress Meter Id
TIngressQueueId Integer32 (0 | 1..32)
The value of TIngressQueueId specifies the identification number
of an ingress queue.  A value of zero (0) indicates that no
specific queue identification has been assigned for this object.
When an object of type TIngressQueueId is an SNMP table index,
an index value of zero (0) is not allowed and a noCreation error
will be returned.
TIpOption Integer32 (0..255)
IP packet options octet.  explanation of the octet bits:

IP OPTION NUMBERS

The Internet Protocol (IP) has provision for optional header fields
identified by an option type field.  Options 0 and 1 are exactly one
octet which is their type field.  All other options have their one
octet type field, followed by a one octet length field, followed by
length-2 octets of option data.  The option type field is sub-divided
into a one bit copied flag, a two bit class field, and a five bit
option number.  These taken together form an eight bit value for the
option type field.  IP options are commonly refered to by this value.


Copy Class Number Value Name                Reference
---- ----- ------ ----- ------------------------------- ---------
   0     0      0     0 EOOL   - End of Options List    [RFC791,JBP]
   0     0      1     1 NOP    - No Operation           [RFC791,JBP]
   1     0      2   130 SEC    - Security                  [RFC1108]
   1     0      3   131 LSR    - Loose Source Route     [RFC791,JBP]
   0     2      4    68 TS     - Time Stamp             [RFC791,JBP]
   1     0      5   133 E-SEC  - Extended Security         [RFC1108]
   1     0      6   134 CIPSO  - Commercial Security           [???]
   0     0      7     7 RR     - Record Route           [RFC791,JBP]
   1     0      8   136 SID    - Stream ID              [RFC791,JBP]
   1     0      9   137 SSR    - Strict Source Route    [RFC791,JBP]
   0     0     10    10 ZSU    - Experimental Measurement      [ZSu]
   0     0     11    11 MTUP   - MTU Probe                 [RFC1191]*
   0     0     12    12 MTUR   - MTU Reply                 [RFC1191]*
   1     2     13   205 FINN   - Experimental Flow Control    [Finn]
   1     0     14   142 VISA   - Expermental Access Control [Estrin]
   0     0     15    15 ENCODE - ???                      [VerSteeg]
   1     0     16   144 IMITD  - IMI Traffic Descriptor        [Lee]
   1     0     17   145 EIP    - Extended Internet Protocol[RFC1385]
   0     2     18    82 TR     - Traceroute        [RFC1393]
   1     0     19   147 ADDEXT - Address Extension    [Ullmann IPv7]
   1     0     20   148 RTRALT - Router Alert              [RFC2113]
   1     0     21   149 SDB    - Selective Directed Broadcast[Graff]
   1     0     22   150 NSAPA  - NSAP Addresses          [Carpenter]
   1     0     23   151 DPS    - Dynamic Packet State        [Malis]
   1     0     24   152 UMP    - Upstream Multicast Pkt. [Farinacci]

[Note, an asterisk (*) denotes an obsoleted IP Option Number.]
TIpProtocol Integer32 (-2 | -1 | 0..255)
IP protocol number.  well known protocol numbers include ICMP(1),
TCP(6), UDP(17).

-1 means value not set.
-2 indicates protocol wildcard for UDP and TCP.
TItemDescription DisplayString (SIZE (0..80))
Description for an item.  Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
TItemLongDescription DisplayString (SIZE (0..160))
Longer description for an item.  Note, use only NVT ASCII displayable
characters here, no control characters, no UTF-8, etc.
TItemMatch INTEGER

false(2) off(1) true(3)

when set to off, the item is not matched.
when set to false, packets without the item match the filter.
when set to true, packets with the item match the filter.
TItemScope INTEGER

exclusive(1) template(2)

This textual-convention determines some aspects of an item's
behavior regarding creation and use, unused entry garbage collection,
and automated promulgation by Element Management System to
other systems in the service domain.

TItemScope applies to SAP-ingress, SAP-egress, and Network policies,
and to IP filters and MAC filters.

exclusive:

    When the scope of an item is defined as exclusive, the item can
    only be applied once, for example to a single SAP.  Attempting
    to assign the policy to a second SAP is not allowed and will
    result in an error.  If the item is removed from the exclusive
    SAP, it will become available for assignment to another
    exclusive SAP.

    A non-applied exclusive scope policy is a candidate to be removed
    from the system by a TBD garbage collection command.

    The system default policies cannot be put into the exclusive scope.
    An error will be generated if scope exclusive is executed in
    any policies with a policy-id equal to 1.

template:

    When the scope of an item is defined as template, the item can be
    applied any number of times.  Policies with template scope
    will not be considered for deletion by a TBD garbage collection
    command; all items of scope 'template' must be deleted explicitly.

    The system default policies will always be scope template.
    An error will occur if a policy-id 1 is attempted to be
    set to scope exclusive.
TLNamedItem DisplayString (SIZE (1..64))
The long name of an item.  When used as an index to a table, the item
name uniquely identifies the instance.  When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
TLNamedItemOrEmpty DisplayString (SIZE (0 | 1..64))
The long name of an item, or an empty string.  When used in a reference
(TLNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
TLevel Integer32 (1..8)
The level of the specified entity while feeding into the parent.
TLevelOrDefault Integer32 (0 | 1..8)
The level of the specified entity while feeding into the parent.
The value 0 is used to denote a default value.
TLspExpValue Integer32 (-1 | 0..7)
MPLS Experimental bits. -1 means not set.
TMACFilterID Unsigned32 (0..65535)

Display hint: d

the identification number of a MAC filter.
TMacFilterType INTEGER

isid(2) normal(1) vid(3)

A type containing the possible types of MAC filters provided by the
system
TMatchCriteria INTEGER

dot1p(5) dscp(4) ip(1) mac(2) none(3) prec(6)

determines whether the entry matches traffic using IP match
entries or MAC match entries.
TMaxDecRate Integer32 (0 | 1..100000000)
The Advanced Configuration policy Max-Decrement rate to be used in
kbps.
TMcFrQoSProfileId Unsigned32 (0..65535)
This textual-convention uniquely identifies Multi-class
Frame-relay QoS profiles in the ingress and egress multi-class
frame-relay QoS profile tables. The value 0 indicates a default
QoS Profile as applicable to a given hardware.
TMeterMode INTEGER

priority(1) profile(2)

Meter Mode
TMlpppQoSProfileId Unsigned32 (0..65535)
This textual-convention uniquely identifies MLPPP Bundle QoS
profile in the ingress and egress MLPPP QoS profile tables.
The value 0 indicates default MLPPP QoS Profile as applicable to
a given H/W
TMplsLspExpProfMapID TPolicyID (1..65535)
The identification number of a MPLS LSP EXP profile.
TNamedItem DisplayString (SIZE (1..32))
The name of an item.  When used as an index to a table, the item
name uniquely identifies the instance.  When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
TNamedItemOrEmpty DisplayString (SIZE (0 | 1..32))
The name of an item, or an empty string.  When used in a reference
(TNamedItemOrEmpty) the item name entry must exist in the table.

Note, use only NVT ASCII displayable characters
here, no control characters, no UTF-8, etc.
TNetworkIngressMeterId Integer32 (0 | 1..16)
Ingress Meter Id
TNetworkPolicyID TPolicyID (1..65535 | 65536 | 65537)
the identification number of a network policy.
TNonZeroWeight Integer32 (1..100)
The weight of the specified entity while feeding into the parent.
TOperator INTEGER

eq(1) gt(4) lt(3) none(0) range(2)

The operator specifies the manner in which a couple of other
MIB objects in the table are supposed to be used.

Operator        Value1               Value2
----------------------------------------------------
none(0)         Any(0)               Any(0)
eq(1)           Specified Value      Any(0)
range(2)        Starting Value       Ending Value
lt(3)           Specified Value      Any(0)
gt(4)           Specified Value      Any(0)

'Any(0)' specifies that, this object can accept any values
 but would default to 0.
TPIRPercentOverride Integer32 (-2 | 1..10000)
The PIR percentage rate specified in hundredths of a percent.
A value of -2 specifies no override.
TPIRRate Integer32 (-1 | 1..100000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
TPIRRateOrZero Integer32 (-1 | 0..100000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
The value 0 means undefined rate.
TPIRRateOverride Integer32 (-2 | -1 | 1..100000000)
The PIR rate to be used in kbps. The value -1 means maximum rate.
A value of -2 specifies no override.
TPIRRatePercent Integer32 (1..100)
The percentage of maximum PIR rate allowed. A value of 0 is
not acceptable, so the range begins at 1.
TPerPacketOffset Integer32 (-32..31)
The value, in bytes, of the adjustment to make to the size of each
packet for accounting.
TPerPacketOffsetOvr Integer32 (-128 | -32..31)
The value, in bytes, of the override of the adjustment to make
to the size of each packet for accounting.
A value of -128 indicates no override.
TPlcrBurstSizeBytes Integer32 (-1 | 0..4194304)
The amount of buffer space (in bytes) assigned to a queue by policer.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
TPlcrBurstSizeBytesOverride Integer32 (-2 | -1 | 0..4194304)
The amount of buffer space (in bytes) assigned to a queue by policer.
The value -1 means that the actual value is derived from the
corresponding buffer policy's default value.
A value of -2 specifies no override.
TPlcyMode INTEGER

none(0) roundRobin(1) weightedDeficitRoundRobin(3) weightedRoundRobin(2)

Port scheduler Policy Mode
TPolicerRateType INTEGER

kbps(1) percentLocalLimit(2)

The type of the PIR/CIR percent rate. The value 'kbps' means the rate is
specified in kbps. The value 'percentLocalLimit' means the rate is
specified in percentage of local limit.
TPolicerWeight Integer32 (1..100)
The relative weight of the specified entity while feeding into
the parent.
TPolicyID Unsigned32 (0..65535 | 65536 | 65537)
The identification number of a policy.
TPolicyStatementNameOrEmpty TNamedItemOrEmpty
The name of a policy statement, when an object refers to it.
TPortSchedulerCIR Integer32 (-1 | 0..400000000)
The Committed Information Rate (CIR) rate to be used in kbps.
The value -1 means maximum rate.
TPortSchedulerPIR Integer32 (-1 | 1..100000000)
The Peak Information Rate (PIR) rate to be used in kbps.
The value -1 means maximum rate.
TPortSchedulerPIRRate Integer32 (-1 | 1..400000000)
The Peak Information Rate (PIR) rate to be used in kbps.
The value -1 means maximum rate.
TPrecValue Integer32 (0..7)
The precedence bits as used in the IPv4 header. This constitutes of
3 bits and hence can hold the values from 0 to 7.
TPrecValueOrNone Integer32 (-1 | 0..7)
The precedence bits as used in the IPv4 header. This constitutes of
3 bits and hence can hold the values from 0 to 7. The value '-1'
specifies that the precedence value is undefined/unused.
TPriority INTEGER

high(2) low(1)

the priority to apply to a packet
TPriorityOrDefault INTEGER

default(3) high(2) low(1)

the priority to apply to a packet.
when set to default(3), the priority from the default-action is used.
TPriorityOrUndefined INTEGER

high(2) low(1) undefined(0)

the priority to apply to a packet.
when set to undefined(0), the priority is not applicable.
TProfile INTEGER

in(1) out(2)

the profile marking of a packet at the ingress.
TProfileOrDei INTEGER

in(1) out(2) use-dei(13)

the profile marking of a packet at the ingress.
TProfileOrNone INTEGER

in(1) none(0) out(2)

Profile marking of a packet.
TProfileUseDEOrNone INTEGER

de(3) in(1) none(0) out(2)

This textual-convention specifies the profile marking of a packet.

Value of 'in' specifies in-profile marking. Value of 'out' specifies
out-profile marking.

Value of 'de' specifies that the profile marking of the packet will
be based on the DE (Drop-Eligible) bit of the packet. DE bit
value of '0' specifies in-profile and DE bit value of '1'
specifies out-profile marking.

Value of 'none' specifies the profile marking of the packet will
be inherited from the existing enqueuing priority derived from
earlier matches in the classification hierarchy.
TQGroupType INTEGER

port(0) vpls(1)

This textual-convention specifies the type of the Queue-Group.
TQPreempt INTEGER

express(0) preemptable(1)

Specifies the preemption mode for the queue.
express     - frames queued for the priority are to be transmitted
              using the express service (eMAC) for the Port
preemptable - frames queued for the priority are to be transmitted
              using the preemptable service for the Port if preemption
              Tx is enabled for the Port.
TQWeight Integer32 (0 | 1..100)
The Queue weight of the specified entity.
TQosOverrideType INTEGER

aggRateLimit(3) arbiter(4) policer(2) queue(1) scheduler(5)

This textual-convention specifies the type of the Qos Override.
TQosQGrpInstanceIDorZero Unsigned32 (0 | 1..65535)
The identifcation number of a QoS queue group instance.

The value of '0' indicates the system determined default value.
TQueueId Integer32 (0 | 1..32)
The value of TQueueId specifies the identification number of a
queue.  A value of zero (0) indicates that no specific queue
identification has been assigned for this object. When an object
of type TQueueId is an SNMP table index, an index value of zero
(0) is not allowed and a noCreation error will be returned.
TQueueIdOrAll Integer32 (-1 | 0 | 1..32)
The value of TQueueIdOrAll specifies the identification number of a
queue

A value of zero (0) indicates that no specific queue
identification has been assigned for this object.

A value of (-1) indicates 'all queues'.
TQueueMode INTEGER

priority(1) profile(2)

The mode in which the queue is operating.

If the queue is operating in the 'priority' mode, it is
capable of handling traffic differently with two distinct
priorities. These priorities are assigned by the stages
preceding the queueing framework in the system.

When the queue is operating in the 'profile' mode, in other
words the color aware mode, the queue tries to provide the
appropriate bandwidth to the packets with different profiles.

The profiles are assigned according to the configuration of the
forwarding class or the sub-forwarding class.

In 'priority' mode, the queue does not have the functionality
to support the profiled traffic and in such cases the queue
will have a degraded performance. However, the converse is not
valid and a queue in 'profile' mode should be capable of
supporting the different priorities of traffic.
TRatePercent Integer32 (0..100)
The percentage of maximum rate allowed.
TRateType INTEGER

kbps(1) percent(2)

The type of the PIR/CIR rate. The value 'kbps' means the rate is
specified in kbps. The value 'percent' means the rate is specified
in percentage
TRemarkType INTEGER

dscp(2) none(1) precedence(3)

The remarking to be used.
TSapEgrEncapGroupActionType INTEGER

create(1) destroy(2)

TSapEgrEncapGroupActionType identifies Encapsulation
group action type on SAP egress. It is used to create
or destroy row entries in an associated table.
TSapEgrEncapGroupType INTEGER

isid(1)

TSapEgrEncapGroupType identifies Encapsulation
group type on SAP egress.
TSapEgrEncapGrpQosPolicyIdOrZero Unsigned32 (0 | 1..65535)
TSapEgrEncapGrpQosPolicyIdOrZero identifies SAP egress Encapsulation
group QoS policy.

The value '0' indicates no QoS policy is set.
TSapEgressPolicyID TPolicyID (1..65535 | 65536 | 65537)
The identification number of a SAP egress policy.
TSapIngressMeterId Integer32 (0 | 1..32)
Ingress Meter Id
TSapIngressPolicyID TPolicyID
The identification number of a SAP ingress policy.
TSdpEgressPolicyID TPolicyID
The identification number of a SDP egress network policy.
TSdpIngressPolicyID TPolicyID
The identification number of a SDP ingress network policy.
TSecondaryShaper10GPIRRate Integer32 (-1 | 1..10000)
The secondary shaper PIR rate to be used in Mbps.
The value -1 means maximum rate.
TSiteOperStatus INTEGER

down(2) outOfResource(3) up(1)

TSiteOperStatus data type is an enumerated integer that
describes the values used to identify the current operational
state of a site.
TSubHostId Unsigned32
A number used to uniquely identify a subscriber host in the system
TSysResource Integer32 (-1 | 0..11)
The resource allocated for a particular application.
The value -1 means maximum rate.
TTcpUdpPort Integer32 (0 | 1..65535)
The number of a TCP or UDP port.
Well known port numbers include
ftp-data(20), ftp(21), telnet(23), smtp(25), http(80),
pop3(110), nntp(119), snmp(161), snmptrap(162), etc.
TTcpUdpPortOperator TOperator
The operator used for checking on TCP/UDP ports values and ranges
TTmplPolicyID Unsigned32 (1..65535)
The identification number of a policy for template objects.
TWeight Integer32 (0..100)
The weight of the specified entity while feeding into the parent.
TmnxAccPlcyAACounters Bits

any(0) ldf(17) mdf(16) naf(6) nba(10) nbd(14) nbm(23) nfa(2) nfd(4) nmt(25) npa(8) npd(12) npm(24) saf(5) sba(9) sbd(13) sbm(20) sdf(15) sfa(1) sfd(3) smt(22) spa(7) spd(11) spm(21) tfc(19) tfd(18)

This data type describes a set of AA (Application Assurance)
counters for which accounting data can be collected.
TmnxAccPlcyOECounters Bits

iod(5) iof(4) ipd(1) ipf(0) ood(7) oof(6) opd(3) opf(2)

This data type describes a set egress counters for which
accounting data can be collected associated with a given counter.
TmnxAccPlcyOICounters Bits

aoo(1) apo(0) hod(4) hpd(2) iof(8) ipf(6) lod(5) lpd(3) oof(9) opf(7)

This data type describes a set ingress counters for which
accounting data can be collected associated with a given counter.
TmnxAccPlcyQECounters Bits

iod(5) iof(4) ipd(1) ipf(0) ood(7) oof(6) opd(3) opf(2)

This data type describes a set egress counters for which
accounting data can be collected associated with a given queue.
TmnxAccPlcyQICounters Bits

aoo(7) apo(6) hod(10) hoo(3) hpd(8) hpo(0) iof(14) ipf(12) lod(11) loo(4) lpd(9) lpo(1) oof(15) opf(13) uco(5) ucp(2)

This data type describes a set ingress counters for which
accounting data can be collected associated with a given queue.

aal5(0) ethernet(1)

The data type TmnxAccessLoopEncapDataLink specifies
the data link used by the subscriber on the DSL access loop.
TmnxAccessLoopEncaps1 INTEGER

notAvailable(0) singleTaggedEthernet(2) untaggedEthernet(1)

The data type TmnxAccessLoopEncaps1 specifies
the encapsulation used by the subscriber on the DSL access loop.
TmnxAccessLoopEncaps2 INTEGER

ethernetOverAal5LlcFcs(5) ethernetOverAal5LlcNoFcs(6) ethernetOverAal5NullFcs(7) ethernetOverAal5NullNoFcs(8) ipoaLlc(3) ipoaNull(4) notAvailable(0) pppoaLlc(1) pppoaNull(2)

The data type TmnxAccessLoopEncaps2 specifies
the encapsulation used by the subscriber on the DSL access loop.
TmnxActionType INTEGER

doAction(1) notApplicable(2)

The TmnxActionType data type is an enumerated integer
that describes the values used to support action or
operation style commands.  Setting a variable of this
type to 'doAction' causes the action to occur.  GETs and
GETNEXTs on this variable return 'not-applicable'.
TmnxAdminState INTEGER

inService(2) noop(1) outOfService(3)

The TmnxAdminState data type is an enumerated integer that describes
the values used to identify the administratively desired state of
functional modules.
TmnxAiiType INTEGER

aiiType1(1) aiiType2(2)

TmnxAiiType indicates LDP FEC 129 Attachment Individual Identifier
(AII) type.
TmnxAncpString DisplayString (SIZE (1..63))
The TmnxAncpString data type contains a valid ancp string.
TmnxAncpStringOrZero DisplayString (SIZE (0..63))
The TmnxAncpStringOrZero data type contains a valid ancp string.
An empty string indicates that no ANCP string is defined.
TmnxAppProfileString DisplayString (SIZE (1..16))
The data type TmnxAppProfileString denotes the application
profile string.
TmnxAppProfileStringOrEmpty DisplayString (SIZE (0..16))
The data type TmnxAppProfileStringOrEmpty denotes the application
profile string. The empty string denotes the absence of a
application profile.
TmnxAsciiSpecification DisplayString (SIZE (0..255))
The data type TmnxAsciiSpecification is a format string
 that specifies how to form a target ASCII string.

 The format is as follows:

<ascii-specification> ::= <char-specification>+

<char-specification>  ::= <ascii-char> | <char-origin>

<char-origin>         ::= '%' <origin>

 <ascii-char> refers to a printable ASCII character.

 Examples and supported char-origin specifiers are supplied with the
 object definitions.
TmnxBGPFamilyType Bits

ipv4Flow(13) ipv4MplsLabel(3) ipv4Multicast(1) ipv4Mvpn(11) ipv4UastMcast(2) ipv4Unicast(0) ipv4Vpn(4) ipv6MplsLabel(8) ipv6Multicast(6) ipv6UcastMcast(7) ipv6Unicast(5) ipv6Vpn(9) l2Vpn(10) mcastVpnIpv4(16) mdtSafi(14) msPw(12) routeTarget(15)

The value of TmnxBGPFamilyType specifies the AFI-SAFI family for
BGP peer.
TmnxBfdSessOperState INTEGER

broken(3) connected(2) noResources(6) notConfigured(5) peerDetectsDown(4) unknown(1)

The TmnxBfdSessOperState data type is an enumerated integer
that describes the values used to identify the operational state of
a BFD session the instance is relying upon for its fast triggering
mechanism.
TmnxBgpAutonomousSystem Integer32 (0..65535)
an autonomous system (AS) number.
TmnxBgpLocalPreference Unsigned32
a local route preference value.
TmnxBgpPreference Unsigned32 (0..255)
a route preference value.
TmnxBgpRouteTarget OCTET STRING (SIZE (1..32))
TmnxBgpRouteTarget is an readable string that specifies the
extended community name to be accepted by a Route Reflector Server
or advertised by the router when reflecting any routes. I.e, it
does not apply to routes that are not reflected by the router.
TmnxBinarySpecification DisplayString (SIZE (0..255))
The data type TmnxBinarySpecification is a string of ASCII characters
 that specifies how to form a binary number.

 The format is as follows:

<binary-specification> ::= <bit-specification>+

<bit-specification>    ::= '0' | '1' | <bit-origin>

<bit-origin>           ::= '*' <number-of-bits> <origin>

<number-of-bits>       ::= [1..32]

 Examples and supported bit-origin specifiers are supplied with the
 object definitions.
TmnxBsxAarpId Unsigned32 (1..65535)
TmnxBsxAarpId identifies an instance of the AA Redundancy
Protocol (AARP).
TmnxBsxAarpIdOrZero Unsigned32 (0 | 1..65535)
TmnxBsxAarpIdOrZero identifies an instance of the AA Redundancy
Protocol (AARP).

The value of '0' indicates an invalid AARP instance.
TmnxBsxAarpServiceRefType INTEGER

dualHomed(1) none(0) shuntNetworkSide(3) shuntSubscriberSide(2)

TmnxBsxAarpServiceRefType identifies the role of the SAP or
Spoke SDP service point being referenced by an AARP instance.
This reference is made in the context of a AARP instance identified
by TmnxBsxAarpIdOrZero.

The service reference types are:

none(0)                - service reference type is not applicable.

dualHomed(1)           - the service reference point is a SAP or
                         Spoke SDP connected into a dually homed
                         network being protected by the AARP instance.

shuntSubscriberSide(2) - the service reference point is a Spoke SDP
                         acting as a subscriber side shunt used by
                         the AARP instance. A subscriber side shunt
                         carries the local from/to subscriber
                         traffic when AA is performed remotely.

shuntNetworkSide(3)    - the service reference point is a Spoke SDP
                         acting as a network side shunt used by
                         the AARP instance. A network side shunt
                         carries the local from/to network
                         traffic when AA is performed remotely.

For the case when TmnxBsxAarpIdOrZero refers to the invalid AARP
instance '0', the service reference type is 'none(0)'.
TmnxBsxTransPrefPolicyId Unsigned32 (1..65535)
TmnxBsxTransPrefPolicyId identifies a transit prefix policy.
TmnxBsxTransPrefPolicyIdOrZero Unsigned32 (0 | 1..65535)
TmnxBsxTransPrefPolicyId identifies a transit prefix policy.

The value '0' indicates an invalid transit prefix policy.
TmnxBsxTransitIpPolicyId Unsigned32 (1..65535)
TmnxBsxTransitIpPolicyId identifies a transit IP policy.
TmnxBsxTransitIpPolicyIdOrZero Unsigned32 (0 | 1..65535)
TmnxBsxTransitIpPolicyId identifies a transit ip policy.

The value '0' indicates an invalid transit IP policy.
TmnxCdrDiagnosticAction INTEGER

excluded(2) included(1)

The TmnxCdrDiagnosticAction is an enumerated integer that describes
whether the Diagnostics should be included or excluded in the
Charging Data Record (CDR).
TmnxCdrType INTEGER

eGCdr(3) gCdr(2) pgwCdr(1)

The TmnxCdrType is an enumerated integer that describes the current
charging type in Charging Data Record (CDR).

pgwCdr - indicates Packet data network Gateway CDR
gCdr - indicates Gateway GPRS Support Node (GGSN) CDR, where
          GPRS stands for General Packet Radio Service.
eGCdr - indicates Enhanced Gateway GPRS Support Node (GGSN) CDR.
TmnxCustId Unsigned32 (0 | 1..2147483647)
A number used to identify a Customer or
Subscriber. This ID must be unique within
the Service Domain. The value 0 is used as
the null ID.
TmnxDHCP6MsgType INTEGER

dhcp6MsgTypeAdvertise(2) dhcp6MsgTypeConfirm(4) dhcp6MsgTypeDecline(9) dhcp6MsgTypeInfoRequest(11) dhcp6MsgTypeMaxValue(14) dhcp6MsgTypeRebind(6) dhcp6MsgTypeReconfigure(10) dhcp6MsgTypeRelayForw(12) dhcp6MsgTypeRelayReply(13) dhcp6MsgTypeRelease(8) dhcp6MsgTypeRenew(5) dhcp6MsgTypeReply(7) dhcp6MsgTypeRequest(3) dhcp6MsgTypeSolicit(1)

The DHCP6 messagetype.
TmnxDefInterDestIdSource INTEGER

useString(1) useTopQTag(2) useVpi(3)

The data type TmnxDefInterDestIdSource specifies what will be used as
the default intermediate destination identifier.

This value is used in case no other source (like RADIUS) provides an
intermediate destination identifier.

If the value of this object is set to 'useString', the value of
the string contained in another object will be used as the default
intermediate destination identifier; that object must be identified
where this datatype is used.

If the value of this object is set to 'useTopQTag', the top q-tag
of the ingress SAP will be used as the default subscriber intermediate
destination identifier.

If the value of this object is set to 'useVpi', the ATM VPI
of the ingress SAP will be used as the default subscriber intermediate
destination identifier.
TmnxDefSubIdSource INTEGER

useAutoId(3) useSapId(1) useString(2)

The data type TmnxDefSubIdSource specifies what will be used as
the default subscriber identification.

This value is used in case no other source (like RADIUS) provides a
subscriber identification string.

If the value of this object is set to 'useSapId', the SAP-id will
be used as the default subscriber identification string.

If the value of this object is set to 'useAutoId', the
auto-generated subscriber identification string, as defined in
tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber
identification string.

If the value of this object is set to 'useString', the value of
the string contained in another object will be used as the default
subscriber identification string; that object must be identified
where this datatype is used.
TmnxDhcpOptionType INTEGER

ascii(2) domain(5) hex(3) ipv4(1) ipv6(4)

The data type TmnxDhcpOptionType represents how the value
of this option is encoded:
- 'ipv4 (1)'  : this option contains an IPv4 address (4 octets)
- 'ascii(2)'  : this option contains seven-bit ASCII characters
- 'hex  (3)'  : this option contains octets. It must be displayed in
                hexadecimal format because it contains non-printable
                characters.
- 'ipv6 (4)'  : this option contains an IPv6 address (16 octets)
- 'domain (5)': this option contains a domain name that will be
                encoded as specified by RFC 1035 section 3.1.
TmnxEgrPolicerStatMode INTEGER

minimal(1) noStats(0) offeredLimitedCapCIR(5) offeredProfileCIR(4) offeredProfileCapCIR(6) offeredProfileNoCIR(2) offeredTotalCIR(3)

TmnxEgrPolicerStatMode specifies the mode of statistics
collected by this egress policer.
TmnxEgrPolicerStatModeOverride INTEGER

minimal(1) noOverride(-1) noStats(0) offeredLimitedCapCIR(5) offeredProfileCIR(4) offeredProfileCapCIR(6) offeredProfileNoCIR(2) offeredTotalCIR(3)

TmnxEgrPolicerStatModeOverride specifies the override mode
of statistics collected by this egress policer.
TmnxEnabledDisabled INTEGER

disabled(2) enabled(1)

The TmnxEnabledDisabled data type is an enumerated integer that
describes the values used to identify whether an entity is
'enabled' or 'disabled'.
TmnxEnabledDisabledOrInherit INTEGER

disabled(2) enabled(1) inherit(3)

The TmnxEnabledDisabledOrInherit data type is an enumerated integer
that describes the values used to identify whether an entity is
'enabled', 'disabled' or inherits its state from another object that
is usually in another mib table.
TmnxEncapVal Unsigned32
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When the encapsulation is nullEncap the value of this object
must be zero.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 00000000 00000000|
+--------+--------+--------+--------+

When the encapsulation is dot1qEncap the value of this object
is equal to the 12-bit IEEE 802.1Q VLAN ID.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

When the encapsulation is mplsEncap the value of this object
is equal to the 20-bit LSP ID.

31                                   0
+--------+--------+--------+--------+
|00000000 0000XXXX XXXXXXXX XXXXXXXX|
+--------+--------+--------+--------+

When the encapsulation is frEncap, the value of this object is
equal to the 10-bit Frame Relay DLCI.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 000000XX XXXXXXXX|
+--------+--------+--------+--------+

When the encapsulation is qinqEncap, the value of the outer
802.1Q VLAN ID is encoded in the least significant 16 bits,
and the value of the inner VLAN ID is encoded in the most
significant 16 bits.

31                                   0
+--------+--------+--------+--------+
|0000YYYY YYYYYYYY 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

When the encapsulation is atmEncap, the value
of the ATM VCI is encoded in the least significant
16 bits, and the value of the ATM VPI is encoded
in the next 12 bits.

For ATM VCs, the top 3 bits are 000.  The value of
the ATM VCI is encoded in the least significant 16
bits, and the value of the ATM VPI is encoded in the next
12 bits.

31                                   0
+--------+--------+--------+--------+
|0000YYYY YYYYYYYY XXXXXXXX XXXXXXXX|
+--------+--------+--------+--------+

For ATM capture VCs, bits 0 and 28 are 1.

31                                   0
+--------+--------+--------+--------+
|00010000 00000000 00000000 00000001|
+--------+--------+--------+--------+

For ATM VPs, the top 3 bits are 010.  The value of
the ATM VPI is encoded in the least significant 12 bits.

31                                   0
+--------+--------+--------+--------+
|01000000 00000000 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

For ATM VP ranges, the top 3 bits are 100.  The value of
the start of the ATM VPI range is encoded in the least significant
12 bits, and the value of the end of the ATM VP range is encoded
in the next 12 bits.

31                                   0
+--------+--------+--------+--------+
|10000000 YYYYYYYY YYYYXXXX XXXXXXXX|
+--------+--------+--------+--------+

For ATM ports, the top 3 bits are 110, and the rest of the bits
must be zero.

31                                   0
+--------+--------+--------+--------+
|11000000 00000000 00000000 00000000|
+--------+--------+--------+--------+

For ATM CPs, the top 3 bits are 001.  The value of
the ATM CP is encoded in the least significant 13 bits.

31                                   0
+--------+--------+--------+--------+
|00100000 00000000 000XXXXX XXXXXXXX|
+--------+--------+--------+--------+

When the encapsulation is wanMirrorEncap the value of this
object is equal to the 12-bit value.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 0000XXXX XXXXXXXX|
+--------+--------+--------+--------+

Some ports have a restrictions to the encapsulation types that
they can support and hence impose restrictions on the respective
formats defined above.
TmnxFilterProfileStringOrEmpty DisplayString (SIZE (0..16))
The data type TmnxFilterProfileStringOrEmpty denotes the filter
profile string. The empty string denotes the absence of a
filter profile.
TmnxIPsecTunnelTemplateId Unsigned32 (1..2048)
A number used to identify an entry in the
tIPsecTnlTempTable.
TmnxIPsecTunnelTemplateIdOrZero Unsigned32 (0..2048)
A number used to identify an entry in the
tIPsecTnlTempTable or zero.
TmnxIgmpGroupFilterMode INTEGER

exclude(2) include(1)

The data type TmnxIgmpGroupFilterMode describes the filter-mode of
a group.

In 'include(1)' mode, reception of packets sent to the specified
multicast address is requested only from those IPv4 Source addresses
listed in the corresponding source-list.

In 'exclude(2)' mode, reception of packets sent to the given multicast
address is requested from all IPv4 Source addresses, except those
listed in the corresponding source-list (if any).
TmnxIgmpGroupType INTEGER

dynamic(2) static(1)

The data type TmnxIgmpGroupType describes how a multicast group is
learned.
TmnxIgmpVersion INTEGER

version1(1) version2(2) version3(3)

The data type TmnxIgmpVersion denotes the version of the IGMP protocol:
- 'version1(1)': means version 1 of the IGMP protocol
- 'version2(2)': means version 2 of the IGMP protocol
- 'version3(3)': means version 3 of the IGMP protocol.
TmnxIkePolicyAuthMethod INTEGER

cert(5) hybridX509XAuth(2) plainPskXAuth(4) plainX509XAuth(3) psk(1)

TmnxIkePolicyAuthMethod data type is an enumerated integer
that describes the type of authentication method used.
TmnxIkePolicyOwnAuthMethod INTEGER

cert(5) psk(1) symmetric(0)

TmnxIkePolicyOwnAuthMethod data type is an enumerated
integer that describes the type of authentication method
used for its own side.
TmnxIngPolicerStatMode INTEGER

minimal(1) noStats(0) offeredLimitedCapCIR(9) offeredLimitedProfileCIR(7) offeredPrioCIR(6) offeredPrioNoCIR(4) offeredProfileCIR(5) offeredProfileCapCIR(8) offeredProfileNoCIR(2) offeredTotalCIR(3)

TmnxIngPolicerStatMode specifies the mode of statistics
collected by this ingress policer.
TmnxIngPolicerStatModeOverride INTEGER

minimal(1) noOverride(-1) noStats(0) offeredLimitedCapCIR(9) offeredLimitedProfileCIR(7) offeredPrioCIR(6) offeredPrioNoCIR(4) offeredProfileCIR(5) offeredProfileCapCIR(8) offeredProfileNoCIR(2) offeredTotalCIR(3)

TmnxIngPolicerStatModeOverride specifies the override mode of statistics
collected by this ingress policer.
TmnxIpSecIsaOperFlags Bits

adminDown(0) noActive(1) noResources(2)

The value of TmnxIpSecIsaOperFlags specifies the operational flags that
determine the status of the MDAs associated with IPsec ISA.
TmnxLdpFECType INTEGER

addrHost(3) addrPrefix(2) addrWildcard(1) vll(128) vpls(130) vpws(129)

TmnxLdpFECType determines the kind of FEC that the label
mapping, withdraw, release and request messages are
referring to.
TmnxMacSpecification DisplayString (SIZE (0..17))
The data type TmnxMacSpecification is a string of ASCII characters
 that specifies how to format a string that represents a MAC address.

 The format is as follows:

<mac-specification> ::= <alpha-string> [<delimiter-char>]

<alpha-string>      ::= <ucase-alpha>+ | <lcase-alpha>+
<ucase-alpha>       ::= 'A' | 'B' | 'B' ... | 'Z'
<lcase-alpha>       ::= 'a' | 'b' | 'c' ... | 'z'

<delimiter-char>    any ASCII character that is not an <alpha-char>
                    or a decimal digit

Only the number of alphabetic characters and the case is relevant.
Examples:

'ab:'               00:0c:f1:99:85:b8  Nokia SROS style
'XY-'               00-0C-F1-99-85-B8  IEEE canonical style
'mmmm.'             0002.03aa.abff     Cisco style.
'xx'                000cf19985b8
TmnxManagedRouteStatus INTEGER

deprecated1(9) enhancedSubMgmtRequired(8) hostInactive(7) installed(0) l2AwNotSupported(10) notYetInstalled(1) outOfMemory(3) parentInterfaceDown(6) routeTableFull(5) shadowed(4) wrongAntiSpoofType(2)

The data type TmnxManagedRouteStatus denotes the status of a Managed Route.
TmnxMdaQos INTEGER

hsmda1(2) hsmda2(3) mda(1) unknown(0)

TmnxMdaQos is an enumerated integer whose value specifies
the Quality of Service support of a Media Dependent Adapter (MDA).
TmnxMldGroupFilterMode INTEGER

exclude(2) include(1)

The data type TmnxMldGroupFilterMode describes the filter-mode of a
group.

In 'include(1)' mode, reception of packets sent to the specified
multicast address is requested only from those IPv6 source addresses
listed in the corresponding source-list.

In 'exclude(2)' mode, reception of packets sent to the given multicast
address is requested from all IPv6 source addresses, except those
listed in the corresponding source-list (if any).
TmnxMldGroupType INTEGER

dynamic(2) static(1)

The data type TmnxMldGroupType describes how a multicast group is
learned.
TmnxMldVersion INTEGER

version1(1) version2(2)

The data type TmnxMldVersion denotes the version of the MLD protocol:
- 'version1(1)': means version 1 of the MLD protocol
- 'version2(2)': means version 2 of the MLD protocol
TmnxMlpppEpClass INTEGER

directoryNumber(5) ipv4Address(2) local(1) macAddress(3) magicNumber(4) null(0)

The TmnxMlpppEpClass type represents the address class
of the MLPPP Endpoint Discriminator option.
TmnxMobAccessType INTEGER

eps(1) gprs(2) non3gpp(3)

The data type TmnxMobAccessType describes the various access types.
eps     - evolved packet system.
gprs    - general packet radio services.
non3gpp - trusted non-3gpp network such as evolved High Rate
          Packet Data (eHRPD) and untrusted non-3gpp network.
TmnxMobAddrScheme INTEGER

stateful(1) stateless(2)

The data type TmnxMobAddrScheme describes the addressing scheme. If
the value is set to 'stateful', User Equipment (UE) uses
DHCPv6 to get IPv6 address. If the value is set to 'stateless', UE uses
ICMPv6 to get IPv6 address.
TmnxMobApn DisplayString (SIZE (1..80))
The data type TmnxMobApn describes the Access Point Name (APN)
associated with an User Equipment (UE).
TmnxMobApnOrZero DisplayString (SIZE (0..80))
The data type TmnxMobApnOrZero describes the Access Point Name (APN)
associated with an User Equipment (UE).
TmnxMobArp Unsigned32 (0..15)
The data type TmnxMobArp describes the QoS parameter, Allocation and
Retention Priority (ARP).
TmnxMobArpValue Unsigned32 (1..15)
The data type TmnxMobArpValue describes the Allocation and Retention
Priority (ARP) value.
TmnxMobArpValueOrZero Unsigned32 (0..15)
The data type TmnxMobArpValueOrZero describes the Allocation and
Retention Priority (ARP) value.
TmnxMobAuthType INTEGER

diameter(2) radius(1)

The data type TmnxMobAuthType describes the authentication type used
by mobile gateways.
TmnxMobAuthUserName INTEGER

imsi(1) msisdn(2) pco(3)

The data type TmnxMobAuthUserName describes the user name used in
authentication requests by mobile gateways.
TmnxMobBearerId Unsigned32 (1..15)
The data type TmnxMobBearerId describes the bearer identifier.
TmnxMobBearerType INTEGER

dedicated(2) default(1)

The data type TmnxMobBearerType describes the type of a bearer.
TmnxMobBufferLimit Unsigned32 (1000..12000)
The data type TmnxMobBufferLimit describes the buffer limit in bytes.
TmnxMobChargingBearerType INTEGER

home(1) roaming(3) visiting(2)

The data type TmnxMobChargingBearerType describes the type of a
bearer context used in charging applications.
TmnxMobChargingLevel INTEGER

bearer(2) pdn(1)

The data type TmnxMobChargingLevel describes the level where the
charging is done.
TmnxMobChargingProfile Unsigned32 (0..255)
The data type TmnxMobChargingProfile describes the charging trigger
rules applied for generating Charging Data Records (CDR) for
subscribers.
TmnxMobChargingProfileOrInherit Integer32 (-1 | 0..255)
The data type TmnxMobChargingProfileOrInherit describes the charging
trigger rules applied for generating Charging Data Records (CDR) for
subscribers. A value of '-1' indicates that identifier will be
inherited from another object that is usually in another mib table.
TmnxMobDfPeerId Unsigned32 (1..16)
The data type TmnxMobDfPeerId identifies Delivery Function (DF) peer
for the mobile gateways.
TmnxMobDiaDetailPathMgmtState INTEGER

closed(2) error(0) idle(1) localShutdown(3) open(7) openCoolingDown(8) remoteClosing(4) waitCea(6) waitConnAck(5) waitDns(9)

The data type TmnxMobDiaDetailPathMgmtState describes the detail state
of a path for a diameter connection.
TmnxMobDiaPathMgmtState INTEGER

active(3) inactive(2) shutDown(0) shuttingDown(1)

The data type TmnxMobDiaPathMgmtState describes the state of a path for
a diameter connection.
TmnxMobDiaPeerHost DisplayString (SIZE (0..80))
The data type TmnxMobDiaPeerHost describes the name of a destination
realm, originating realm and originating host.
TmnxMobDiaRetryCount Unsigned32 (0..8)
The data type TmnxMobDiaRetryCount describes the diameter peer
retry count value.
TmnxMobDiaTransTimer Unsigned32 (1..180)
The data type TmnxMobDiaTransTimer describes the diameter peer
transaction timer value in seconds.
TmnxMobDualStackPref INTEGER

ipv4(1) ipv6(2) useCplane(3)

The data type TmnxMobDualStackPref describes the preference in a
dual IP stack.

The value 'useCplane' specifies that the value is inherited from
the preference in a dual IP stack on control plane.
TmnxMobGwId Unsigned32 (1..8)
The data type TmnxMobGwId identifies mobile gateways.
TmnxMobGwType INTEGER

pgw(2) sgw(1) wlanGw(3)

The data type TmnxMobGwType describes the mobile gateway type.
TmnxMobImei DisplayString (SIZE (0 | 16))
The data type TmnxMobImei describes the International Mobile
Equipment Identity (IMEI) of an User Equipment (UE).
TmnxMobImsi OCTET STRING (SIZE (8))
The data type TmnxMobImsi describes the International Mobile
Subscriber Identity (IMSI) of an User Equipment (UE).

IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN). The internal
representation of the IMSI is as follows:

Bits 63-62 are reserved.

Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.

Bits 59-0 hold the 15 IMSI BCD digits D1-15.

When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.


IMSI encoding for a 2-digit MNC:

63          55         47          39                         0

+-----------+-----------+-----------+-------------------------+

| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)

+-----------+-----------+-----------+-------------------------+


IMSI encoding for a 3-digit MNC:

63          55         47          39     35                  0

+-----------+-----------+-----------+-------------------------+

| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)

+-----------+-----------+-----------+-------------------------+

Bits 63-56 of the IMSI are carried in octet number 1 of the octet
string and bits 7-0 are carried in octet number 8 of the octet
string.
TmnxMobImsiStr DisplayString (SIZE (0 | 9..15))
The data type TmnxMobImsiStr describes the International Mobile
Subscriber Identity (IMSI) of a User Equipment (UE).
TmnxMobIpCanType INTEGER

epc3gpp(1) gprs3gpp(2)

The data type TmnxMobIpCanType describes the type of Internet Protocol
Connectivity Access Network (IP-CAN) session as Evolved Packet Core
(epc3gpp) or GPRS (gprs3gpp).
TmnxMobLiTarget OCTET STRING (SIZE (8))
The data type TmnxMobLiTarget describes the target for the
interception.

The target can be of type International Mobile Subscriber Identity
(IMSI), Mobile Subscriber Integrated Services Digital Network (MSISDN)
or International Mobile Equipment Identity (IMEI).

IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN). The internal
representation of the IMSI is as follows:

Bits 63-62 are reserved.

Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.

Bits 59-0 hold the 15 IMSI BCD digits D1-15.

When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.

IMSI encoding for a 2-digit MNC:

63          55         47          39                         0

+-----------+-----------+-----------+-------------------------+

| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)

+-----------+-----------+-----------+-------------------------+


IMSI encoding for a 3-digit MNC:

63          55         47          39     35                  0

+-----------+-----------+-----------+-------------------------+

| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)

+-----------+-----------+-----------+-------------------------+

Bits 63-56 of the IMSI are carried in octet number 1 of the octet
string and bits 7-0 are carried in octet number 8 of the octet
string.
TmnxMobLiTargetType INTEGER

imei(3) imsi(1) msisdn(2)

The data type TmnxMobLiTargetType describes the types of target in
Lawful Interception (LI).
TmnxMobMcc DisplayString (SIZE (3))
The data type TmnxMobMcc describes the Mobile Country Code
(MCC) of an User Equipment (UE).
TmnxMobMccOrEmpty DisplayString (SIZE (0 | 3))
The data type TmnxMobMccOrEmpty describes the Mobile Country Code
(MCC) of an User Equipment (UE).
TmnxMobMnc DisplayString (SIZE (2 | 3))
The data type TmnxMobMnc describes the Mobile Network Code
(MNC) of an User Equipment (UE).
TmnxMobMncOrEmpty DisplayString (SIZE (0 | 2 | 3))
The data type TmnxMobMncOrEmpty describes the Mobile Network Code
(MNC) of an User Equipment (UE).
TmnxMobMsisdn DisplayString (SIZE (0..15))
The data type TmnxMobMsisdn describes the Mobile Subscriber Integrated
Services Digital Network (MSISDN) number of an User Equipment (UE).
TmnxMobNai DisplayString (SIZE (0..72))
The data type TmnxMobNai describes the Network Address
Identifier (NAI) of an User Equipment (UE).
TmnxMobNode DisplayString (SIZE (0..30))
The data type TmnxMobNode describes the name of a mobile gateway which
consists of Mobile Country Code (MCC), Mobile Network Code (MNC),
Region string, Group Id, Node Id.

A mobile gateway name can be described as follows:

<MCC>.<MNC>.<SGW|PGW>.<Region String>.<Group Id>.<Node Id>

MCC : 3 digits (000-999)
MNC : 2 or 3 digits
Application Type : SGW or PGW (3 characters)
Region String : 10 characters
Group Id : 3 characters
Node Id : 3 characters
TmnxMobPathMgmtState INTEGER

disabled(0) fault(3) idle(4) reqTimeOut(2) restart(5) up(1)

The data type TmnxMobPathMgmtState describes the state of a path for a
reference point. A value of 'reqTimeOut' indicates that the peer is not
replying to the Echo Request messages the SGW is sending out.
TmnxMobPdnGyChrgTriggerType INTEGER

locCellIdRecvd(22) locLacRecvd(21) locMccRecvd(18) locMncRecvd(19) locRacRecvd(20) locRecvd(2) medCompRecvd(23) partcNmbRecvd(24) qosDlyClsRecvd(6) qosGrtBtRtDllnkRecvd(17) qosGrtBtRtUplnkRecvd(16) qosMeanTrptRecvd(9) qosMxBtRtDllnkRecvd(11) qosMxBtRtUplnkRecvd(10) qosPeakThrptRecvd(7) qosPrcClsRecvd(8) qosRecvd(1) qosResBerRecvd(12) qosRlbClsRecvd(5) qosSduErrRatRecvd(13) qosTransDelayRecvd(14) qosTrfClsRecvd(4) qosTrfHndPriRecvd(15) ratRecvd(3) servCondRecvd(27) servNodeRecvd(28) sgsnIpAddrRecvd(0) thrldPartcNmbRecvd(25) usrCsgInfoRecvd(29) usrPartcTypeRecvd(26)

The data type TmnxMobPdnGyChrgTriggerType describes type of the trigger
activated by the Online Charging System (OCS).

sgsnIpAddrRecvd       - Change in Serving GPRS Support Node (SGSN) IP
                        address
qosRecvd              - Change in Quality of Service (QoS)
locRecvd              - Location Change
ratRecvd              - Router Advertisement Trigger (RAT) Change
qosTrfClsRecvd        - Change in QoS Traffic class
qosRlbClsRecvd        - Change in QoS Reliability class
qosDlyClsRecvd        - Change in QoS Delay class
qosPeakThrptRecvd     - Change in QoS Peak Throughput
qosPrcClsRecvd        - Change in QoS Precedence class
qosMeanTrptRecvd      - Change in QoS Mean Throughput
qosMxBtRtUplnkRecvd   - Change in QoS MBR for Uplink
qosMxBtRtDllnkRecvd   - Change in QoS MBR for Downlink
qosResBerRecvd        - Change in QoS Residual Bit Error Rate (BER)
qosSduErrRatRecvd     - Change in QoS Service Data Unit (SDU) Error
                        Ratio class
qosTransDelayRecvd    - Change in QoS Transfer Delay
qosTrfHndPriRecvd     - Change in QoS Traffic Handling Priority
qosGrtBtRtUplnkRecvd  - Change in QoS Guaranteed Bit Rate (GBR) for
                        Uplink
qosGrtBtRtDllnkRecvd  - Change in QoS GBR for Downlink
locMccRecvd           - Change in Location Mobile Country Code (MCC)
locMncRecvd           - Change in Location Mobile Network Code (MNC)
locRacRecvd           - Change in Location Routing Area Code (RAC)
locLacRecvd           - Change in Location Location Area Code (LAC)
locCellIdRecvd        - Change in Location Cell ID
medCompRecvd          - Change in Media Composition
partcNmbRecvd         - Change in Participants' number
thrldPartcNmbRecvd    - Change in Threshold of Participants' number
usrPartcTypeRecvd     - Change in User Participating Type
servCondRecvd         - Change in Service Condition
servNodeRecvd         - Change in Service Node
usrCsgInfoRecvd       - Change in User Closed Subscription Group (CSG)
                        Information
TmnxMobPdnRefPointType INTEGER

gn(3) gp(5) s2a(4) s5(1) s8(2)

The data type TmnxMobPdnRefPointType describes the types of reference
point.
TmnxMobPdnSessionEvent INTEGER

dlPktNotificationAck(13) dlPktNotificationFail(14) dlPktRecvIndication(12) eventMax(22) gtpCreateSessReq(1) gtpDeleteBearerResp(4) gtpDeleteSessReq(3) gtpModifyActiveToIdle(6) gtpModifyQosCmd(8) gtpResrcAllocCmd(7) gtpS1CreateIndirectTunnel(11) gtpUpdateBearerReq(2) gtpUpdateBearerResp(5) gtpX1eNodeBTeidUpdate(9) gtpX2SrcSgwDeleteSessReq(10) pcrfProvQosRules(17) pcrfSessEstResp(15) pcrfSessTerminateRsp(16) pmipSessDeleteReq(21) pmipSessDeleteRsp(20) pmipSessResp(18) pmipSessUpdate(19) sessionInvalid(0)

The data type TmnxMobPdnSessionEvent describes the feedback signaling
message (FSM) event of a Packet Data Network (PDN) session.
TmnxMobPdnSessionState INTEGER

connected(5) dlDelPending(7) dlHandover(10) idleMode(8) incomingHandover(11) init(1) invalid(0) outgoingHandover(12) pageMode(9) stateMax(13) ulDelPending(6) waitEnodebUpdate(4) waitPcrfResponse(2) waitPgwResponse(3)

The data type TmnxMobPdnSessionState describes the feedback signaling
message (FSM) state of a Packet Data Network (PDN) session.
TmnxMobPdnType INTEGER

ipv4(1) ipv4v6(3) ipv6(2)

The data type TmnxMobPdnType describes the type of a Pakcet Data
Network (PDN).
TmnxMobPeerType INTEGER

hsgw(3) pgw(2) sgw(1)

The data type TmnxMobPeerType describes the type of the mobile gateway
peer as Serving Gateway (SGW), Packet Data Network Gateway (PGW) or
High Rate Packet Data (HRPD) Serving Gateway (HSGW).
TmnxMobPgwSigProtocol INTEGER

gtp(1) pmip(2)

The data type TmnxMobPgwSigProtocol describes the signaling
protocol used on S5 or S8 reference point.
TmnxMobPresenceState INTEGER

absent(0) present(1)

The data type TmnxMobPresenceState describes the whether the given field
is present.
TmnxMobProfGbrRate Unsigned32 (0..100000)
The data type TmnxMobProfGbrRate describes the Guaranteed Bit Rate
(GBR) value in kilo-bits per second(kbps).
TmnxMobProfIpTtl Unsigned32 (1..255)
The data type TmnxMobProfIpTtl describes the Time-To-Live (TTL)
value.
TmnxMobProfMbrRate Unsigned32 (0..100000)
The data type TmnxMobProfMbrRate describes the Maximum Bit Rate
(MBR) value in kilo-bits per second(kbps).
TmnxMobProfName TNamedItem
The data type TmnxMobProfName describes the name of a profile used by
mobile gateways.
TmnxMobProfNameOrEmpty TNamedItemOrEmpty
The data type TmnxMobProfNameOrEmpty describes the name of a profile
used by mobile gateways.
TmnxMobProfPolChargingMethod INTEGER

both(3) offline(2) online(1) profChargingMtd(0)

TmnxMobProfPolChargingMethod data type is an enumerated
integer that describes the Charging Method for the Policy and
Charging Control (PCC) rule. A variable of this type could be
set to 'online' charging method, 'offline' charging method or
'both'.

If the variable is set to 'profChargingMtd' the charging
method is set to 'offline' if 'tmnxMobProfPgwChrgOffLineState'
is set to 'enabled', the charging method is set to 'online' if
'tmnxMobProfPgwChrgGyState' is set to 'enabled' and the charging
method is set to 'both' if both 'tmnxMobProfPgwChrgOffLineState'
and 'tmnxMobProfPgwChrgGyState' are set to 'enabled'.
TmnxMobProfPolMeteringMethod INTEGER

both(3) timeBased(1) volBased(2)

TmnxMobProfPolMeteringMethod data type is an enumerated
integer that describes the Metering Method for the Policy and
Charging Control (PCC) rule.
TmnxMobProfPolReportingLevel INTEGER

ratingGrp(2) servId(1)

TmnxMobProfPolReportingLevel data type is an enumerated integer
that describes the Reporting level for the Policy and Charging
Control (PCC) rule.
TmnxMobQci Unsigned32 (0..9)
The data type TmnxMobQci describes the QoS Class Identifier.
TmnxMobQciValue Unsigned32 (1..9)
The data type TmnxMobQciValue describes the QoS Class Identifier (QCI)
value.
TmnxMobQciValueOrZero Unsigned32 (0..9)
The data type TmnxMobQciValueOrZero describes the QoS Class
Identifier (QCI) value.
TmnxMobQueueLimit Unsigned32 (1000..12000)
The data type TmnxMobQueueLimit describes the queue limit in bytes.
TmnxMobRatingGrpState INTEGER

allowFlow(1) allowResRules(4) creditsToppedUp(7) dis1stPktTrigger(6) disallowFlow(2) iom1stPktTrigger(5) redWebPortal(3) waitForFpt(8)

The data type TmnxMobRatingGrpState describes the state of a rating
group.

allowFlow - Allow the traffic to flow
disallowFlow - Disallow the traffic to Flow
redWebPortal - Redirect the traffic to web portal
allowResRules - Allow restricted rules
iom1stPktTrigger - Get the trigger from on IOM on arrival of 1st packet
dis1stPktTrigger - Disable 1st packet trigger and allow the traffic
creditsToppedUp - Credits topped up
waitForFpt - Unblocked and waiting for First Packet Trigger (FPT)
TmnxMobRfAcctLevel INTEGER

pdnLevel(1) qciLevel(2)

TmnxMobRfAcctLevel data type is an enumerated integer that
describes the accounting level.
TmnxMobRtrAdvtInterval Unsigned32 (1..60)
The data type TmnxMobRtrAdvtInterval describes the router
advertisement interval in minutes.
TmnxMobRtrAdvtLifeTime Unsigned32 (1..24)
The data type TmnxMobRtrAdvtLifeTime describes the router
advertisement life time in hours.
TmnxMobSdf Unsigned32 (0..255)
The data type TmnxMobSdf describes the number of Service Data
Flows (SDFs).
TmnxMobSdfFilter Unsigned32 (0..16)
The data type TmnxMobSdfFilter describes a IP filter in a Service
Data Flow (SDF) or Traffic Flow Template (TFT).
TmnxMobSdfFilterDirection INTEGER

biDir(3) downLink(1) preRel7(0) upLink(2)

The data type TmnxMobSdfFilterDirection describes the direction
on which a Service Data Flow (SDF) filter rule is valid.
TmnxMobSdfFilterNum Unsigned32 (0..16)
The data type TmnxMobSdfFilterNum describes the number of IP filters.
TmnxMobSdfFilterProtocol INTEGER

activeNet(107) ah(51) any(-1) any0hop(114) anyDFS(68) anyHostIntl(61) anyLocalNet(63) anyPEC(99) argus(13) aris(104) ax25(93) bbnRccMon(10) bna(49) brSatMon(76) cbt(7) cftp(62) chaos(16) compaqPeer(110) cphb(73) cpnx(72) crtp(126) crudp(127) dccp(33) dcnMeas(19) ddp(37) ddx(116) dgp(86) dsr(48) egp(8) eiGrp(88) emcon(14) encap(98) esp(50) etherIp(97) fc(133) fire(125) ggp(3) gmtp(100) gre(47) hip(139) hmp(20) iNlsp(52) iatp(117) icmp(1) idpr(35) idprCmtp(38) idrp(45) ifmp(101) igmp(2) igp(9) il(40) ip(4) ipComp(108) ipcv(71) ipip(94) iplt(129) ippc(67) ipv6(41) ipv6Frag(44) ipv6HopByOpOpt(0) ipv6Icmp(58) ipv6NoNxt(59) ipv6Opts(60) ipv6Route(43) ipxInIp(111) irdp(28) isis(124) isoIp(80) isoTp4(29) kryptolan(65) l2tp(115) larp(91) leaf1(25) leaf2(26) manet(138) meritInp(32) mfeNsp(31) micp(95) mobHeader(135) mobile(55) mplsInIp(137) mtp(92) mux(18) narp(54) netblt(30) nsfnetIgp(85) nvp2(11) ospfIgp(89) pc3(34) pgm(113) pim(103) pipe(131) pnni(102) prm(21) ptp(123) pup(12) pvp(75) qnx(106) rdp(27) rsvp(46) rsvpE2eIgnore(134) rvd(66) satExpak(64) satMon(69) sccSp(96) scps(105) sctp(132) sdrp(42) secureVmpt(82) shim6(140) skip(57) sm(122) smp(121) snp(109) spriteRpc(90) sps(130) srp(119) sscopmce(128) st(5) stp(118) sunNd(77) swipe(53) tcf(87) tcp(6) tlsp(56) tpplusplus(39) trunk1(23) trunk2(24) ttp(84) udp(17) udpLite(136) uti(120) vines(83) visa(70) vmtp(81) vrrp(112) wbExpak(79) wbMon(78) wsn(74) xnet(15) xnsIdp(22) xtp(36)

The data type TmnxMobSdfFilterProtocol describes IPv4 protocol or
IPv6 next header on which Service Data Flow (SDF) filter matches.
TmnxMobSdfRuleName DisplayString (SIZE (1..64))
The data type TmnxMobSdfRuleName describes the policy rule name of a
Service Data Flow (SDF).
TmnxMobServRefPointType INTEGER

s2a(4) s5(1) s8(2)

The data type TmnxMobServRefPointType describes the types of reference
point.
TmnxMobServerState INTEGER

down(2) na(0) up(1)

The data type TmnxMobServerState describes the state of a server
connected with a mobile gateway.
TmnxMobStaticPolPrecedence Unsigned32 (1..65536)
The data type TmnxMobStaticPolPrecedence describes the precedence
value for a static policy configured in the system.
TmnxMobStaticPolPrecedenceOrZero Unsigned32 (0..65535)
The data type TmnxMobStaticPolPrecedence describes the precedence
value for a static policy configured in the system.
TmnxMobUeId OCTET STRING (SIZE (8))
The data type TmnxMobUeId describes the identity of an User Equipment.
TmnxMobUeId can be of the following types: International Mobile
Subscriber Identity (IMSI), International Mobile station Equipment
Identity (IMEI), Mobile Subscriber Integrated Services Digital network
Number (MSISDN). IMSI, IMEI, MSISDN are defined in 3GPP TS 23.003.

IMSI is defined as a number consisting of up to 15 BCD digits. The
first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
digits are the Mobile Network Code (MNC). The value of MCC determines
whether the MNC is 2 digits or 3 digits. The remaining digits are the
Mobile Subscriber Identification Number (MSIN).

IMEI is defined as a number consisting of up to 16 BCD digits. The
first 8 digits consists of Type Allocation Code (TAC). The next 6
digits consist of Serial Number (SNR) which could be followed by a
Check Digit (CD) or Spare Digit (SD) of size 1 digit or by a Software
Version Number (SVN) of size 2 digits.

MSISDN is defined as a number consisting of 9 to 15 BCD digits. MSISDN
consists of Country Code (CC) followed by National Destination Code
(NDC) and Subscriber Number (SN).

Bits 63-56 of the IMSI or IMEI or MSISDN are carried in octet number 1
of the octet string and bits 7-0 are carried in octet number 8 of the
octet string.

The internal representation of the IMSI is as follows:

Bits 63-62 are reserved.

Bits 61-60 indicate the length of the MNC field: 10 indicates a
2-digit MNC while 11 indicates a 3-digit MNC.

Bits 59-0 hold the 15 IMSI BCD digits D1-15.

When the total number of digits in the IMSI is less than 15, the
nibble 0xf is used a filler.

IMSI encoding for a 2-digit MNC:


63          55         47          39                         0

+-----------+-----------+-----------+-------------------------+

| 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)

+-----------+-----------+-----------+-------------------------+


IMSI encoding for a 3-digit MNC:


63          55         47          39     35                  0

+-----------+-----------+-----------+-------------------------+

| 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)

+-----------+-----------+-----------+-------------------------+


The internal representation of the IMEI and MSISDN is as follows:

IMEI encoding:


63          55         31                      7       0

+-----------+-----------+----------------------+-------+

|          TAC          |         SNR          |  SNV  |
|N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|

+-----------+-----------+-----------+------------------+


MSISDN encoding:

63          55         31                      7       0

+-----------+-----------+----------------------+-------+

|   CC   |   NDC  |                  SN                |
|N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|

+-----------+-----------+-----------+------------------+

When the total number of digits in the IMEI or MSISDN is less than 15,
the nibble 0x0 is used a filler.

In each byte both nibbles are swapped and it is stored as shown in the
above format. For example, in the format N3 & N4 present the
nibble number 3 and 4 respectively and they are stored in reverse
order.

When the total number of digits are odd in IMEI and MSISDB, the last
digit will be paired with nibble 0xf.
TmnxMobUeIdType INTEGER

imei(1) imsi(0) msisdn(2)

The data type TmnxMobUeIdType describes the types of identification
for User Equipment (UE).
TmnxMobUeRat INTEGER

ehrpd(7) eutran(6) gan(4) geran(2) hrpd(8) hspa(5) oneXrtt(9) umb(10) utran(1) wlan(3)

The data type TmnxMobUeRat describes the Radio Access Type (RAT)
of an User Equipment (UE).
TmnxMobUeState INTEGER

active(2) ddnDamp(6) idle(1) init(4) paging(3) suspend(5)

The data type TmnxMobUeState describes the state of an User
Equipment (UE).
TmnxMobUeStrPrefix DisplayString (SIZE (4..15))
The data type TmnxMobUeStrPrefix describes the prefix for
International Mobile Subscriber Identity (IMSI) or Mobile Subscriber
Integrated Services Digital Network (MSISDN) of an User
Equipment (UE).
TmnxMobUeSubType INTEGER

homer(1) roamer(2) visitor(3)

The data type TmnxMobUeSubType describes the subscription type of User
Equipment (UE).
TmnxMplsTpGlobalID Unsigned32
The value of TmnxMplsTpGlobalID specifies the MPLS-TP global
identifier.
TmnxMplsTpNodeID Unsigned32
The value of TmnxMplsTpNodeID specifies the MPLS-TP node identifier.
TmnxMplsTpTunnelType INTEGER

mplsTpStatic(1)

The type of this MPLS-TP tunnel entity.
TmnxMsPwPeSignaling INTEGER

auto(1) master(2)

A number used to identify a multi-segment pseudo-wire provider-edge
signaling type.
TmnxMulticastAddrFamily INTEGER

ipv4Multicast(0) ipv6Multicast(1)

The data type TmnxMulticastAddrFamily denotes the family for
multicast protocol.
TmnxOperGrpHoldDownTime Unsigned32 (0..3600)
TmnxOperGrpHoldDownTime indicates time-interval in seconds for the
service operational-group hold down time.
TmnxOperGrpHoldUpTime Unsigned32 (0..3600)
TmnxOperGrpHoldUpTime indicates time-interval in seconds for the
service operational-group hold uptime.
TmnxOperState INTEGER

inService(2) outOfService(3) transition(4) unknown(1)

The TmnxOperState data type is an enumerated integer that describes
the values used to identify the current operational state of functional
modules.
TmnxOspfInstance Unsigned32 (0..31)
A number used to identify an instance of OSPF.
TmnxPortID InterfaceIndex
On PSS, the TmnxPortID will be the ifIndex as encoded in PSS.

Port Identifier:
     32  ..  25|24  ..  17|16  ..   9|8   ..   1
    +----------+----------+----------+----------+
    | shelf(8) | slot(8)  |0| port(7)| unused(8)|
    +----------+----------+----------+----------+

WANIF Identifier:
     32  ..  25|24  ..  17|16  ..   9|8   ..   1
    +----------+----------+----------+----------+
    | shelf(8) | slot(8)  |100|  WanIf(10)  |001|
    +----------+----------+----------+----------+

LAG Identifier: (legacy card)
     32  ..  25|24  ..  17|16  ..   9|8   ..   1
    +----------+----------+----------+----------+
    | shelf(8) | slot(8)  |1|lagID(7)| unused(8)|
    +----------+----------+----------+----------+

LAG Identifier: (packetswitch - if a SwitchID is NOT included in MIB table index)
     32..29|28    ..    17|16   ..  9|8   ..   1
    +------+--------------+----------+----------+
    | 0111 | SwitchID(12) | lagID(8) | unused(8)|
    +------+--------------+----------+----------+

LAG Identifier: (packetswitch - if a SwitchID is included in MIB table index)
     32  ..  25|24  ..  17|16  ..   9|8   ..   1
    +----------+----------+----------+----------+
    | 01010000 | unused(8)| unused(8)|   lagID  |
    +----------+----------+----------+----------+
TmnxPppNcpProtocol INTEGER

ipcp(1) ipv6cp(2)

The TmnxPppNcpProtocol data type represents the PPP Network Control
Protocol.
TmnxPppoePadoDelay Unsigned32 (0 | 1..30)
The data type TmnxPppoePadoDelay specifies the delay timeout in
deci-seconds before sending a PADO (PPPoE Active Discovery Offer).
TmnxPppoeSessionId Unsigned32 (0..65535)
The TmnxPppoeSessionId indicates the 16 bit wide PPPoE session Id.
TmnxPppoeSessionInfoOrigin INTEGER

default(1) dhcp(4) l2tp(7) localUserDb(3) midSessionChange(5) none(0) radius(2) tags(6)

The TmnxPppoeSessionInfoOrigin indicates the originator of the
provided information.
TmnxPppoeSessionType INTEGER

l2tp(4) local(1) localRetail(3) localWholesale(2)

The TmnxPppoeSessionType indicates the type of PPPoE session.
TmnxPppoeUserName DisplayString (SIZE (1..128))
The data type TmnxPppoeUserName denotes the PPPoE username.
TmnxPppoeUserNameOrEmpty DisplayString (SIZE (0..128))
The data type TmnxPppoeUserNameOrEmpty denotes the PPPoE username.
TmnxPwGlobalId Unsigned32 (1..4294967295)
A number used to identify a global pseudo-wire routing identifier.
TmnxPwGlobalIdOrZero Unsigned32
A number used to identify a global pseudo-wire routing identifier or
zero.
TmnxPwPathHopId Unsigned32 (1..16)
A number used to identify a specific hop associated with pseudo-wire
routing path.
TmnxPwPathHopIdOrZero Unsigned32 (0..16)
A number used to identify a specific hop associated with pseudo-wire
routing path.
TmnxQosBytesHex OCTET STRING (SIZE (0..30))

Display hint: 2x

Represents the QoS bytes that has been requested for the bearer context
of an User Equipment (UE).
TmnxRadiusPendingReqLimit Unsigned32 (1..4096)
The TmnxRadiusPendingReqLimit data type is a number
that specifies the limit to the number of pending
RADIUS request messages.
TmnxRadiusServerOperState INTEGER

inService(2) outOfService(3) overloaded(5) transition(4) unknown(1)

The TmnxRadiusServerOperState data type is an enumerated integer
that describes the values used to identify the operational state
of a RADIUS server.
TmnxReasContextVal Unsigned32 (0..31)
The value of the label used to identify the entity using the
specified context value on a specific port.

31                                   0
+--------+--------+--------+--------+
|00000000 00000000 00000000 000XXXXX|
+--------+--------+--------+--------+

The value of this object is encoded in the least significant 5 bits
and represents the context value.
TmnxRsvpDSTEClassType Unsigned32 (0..7)
TmnxRsvpDSTEClassType is an unsigned integer in the range of (0..7) that defines
the class type (CT).
TmnxServId Unsigned32 (0 | 1..2147483647 | 2147483648 | 2147483649 | 2147483650)
A number used to identify a Service. This ID
must be unique within the Service Domain.
The value 0 is used as the null ID.
TmnxSlaProfileString DisplayString (SIZE (1..16))
The data type TmnxSlaProfileString denotes the SLA
profile string.
TmnxSlaProfileStringOrEmpty DisplayString (SIZE (0..16))
The data type TmnxSlaProfileStringOrEmpty denotes the SLA
profile string. The empty string denotes the absence of a
SLA profile.
TmnxSlopeMap INTEGER

high(2) highLow(3) low(1) none(0)

TmnxSlopeMap indicates the mapping style of the slope.
TmnxSpbBridgePriority Integer32 (0..15)
TmnxSpbFid indicates the bridge priority for Shortest Path Bridging.
TmnxSpbFdbLocale INTEGER

local(1) sap(2) sdp(3) unknown(4)

TmnxSpbFdbLocale data type is an enumerated integer that describes the
values used to indicate source of forwarding data-base (FDB) entry for
Shortest Path Bridging (SPB).
TmnxSpbFdbState INTEGER

addModPending(1) delPending(2) noFateShared(4) noUcast(6) ok(0) svcFdbLimit(5) sysFdbLimit(3)

TmnxSpbFdbState data type is an enumerated integer that describes the
values used to indicate state of the forwarding data-base FDB entry
for Shortest Path Bridging (SPB).
TmnxSpbFid Integer32 (1..4095)
TmnxSpbFid indicates Shortest Path Bridging forwarding database
identifier.
TmnxSpbFidOrZero Integer32 (0..4095)
TmnxSpbFid indicates Shortest Path Bridging forwarding database
identifier.
TmnxSpokeSdpId Unsigned32 (1..4294967295)
A number used to identify a multi-segment pseudo-wire provider-edge
identifier.
TmnxSpokeSdpIdOrZero Unsigned32
A number used to identify a multi-segment pseudo-wire provider-edge
identifier.
TmnxSrrpPriorityStep Integer32 (0..10)
TmnxSrrpPriorityStep indicates the range of the priority steps used
by the operational group to monitor SRRP.
TmnxStatus INTEGER

create(1) delete(2)

The TmnxStatus data type is an enumerated integer that describes the
values used to identify the current status of functional modules in the
system such as OSPF and MPLS protocols. Setting this variable to
'create' causes instantiation of the feature in the system.  Setting it
to 'delete' removes the instance and all associated configuration
information.
TmnxStrSapId DisplayString (SIZE (0..32))
The value of TmnxStrSapId is a printable string which
contains the owner SAP Id or equivalent on a remote system.

The string should contain the printable string equivalent of the
textual-conventions TmnxPortID and TmnxEncapVal in the format
specified as TmnxPortID[:TmnxEncapVal]
TmnxSubAleOffset INTEGER

ipoaLlc(11) ipoaNull(12) ipoe(23) ipoeTagged(24) ipoeoaLlc(13) ipoeoaLlcFcs(14) ipoeoaLlcTagged(15) ipoeoaLlcTaggedFcs(16) ipoeoaNull(17) ipoeoaNullFcs(18) ipoeoaNullTagged(19) ipoeoaNullTaggedFcs(20) none(0) pppoaLlc(1) pppoaNull(2) pppoe(21) pppoeTagged(22) pppoeoaLlc(3) pppoeoaLlcFcs(4) pppoeoaLlcTagged(5) pppoeoaLlcTaggedFcs(6) pppoeoaNull(7) pppoeoaNullFcs(8) pppoeoaNullTagged(9) pppoeoaNullTaggedFcs(10)

The data type TmnxSubAleOffset specifies
the encapsulation offset value of the subscriber
in the DSL access loop as used by the 7xxx system.

This offset is used in 7xxx egress shaping in order to
accurately shape the end user payload.
TmnxSubAleOffsetMode INTEGER

auto(1) none(0)

The data type TmnxSubAleOffsetMode specifies
the way the encapsulation offset of the subscriber
in the DSL access loop is learned by the 7xxx system.

This offset is used in 7xxx egress shaping, adjusting the subscriber
aggregate rate to account for the fixed encapsulation offset and per
packet variable expansion of the last mile for the specific session
used by the subscriber host.

The value 'none' disables the adjustment.

While the value is 'auto', the encapsulation offset will be
learned for example from the encapsulation type value signaled
in the Access-loop-encapsulation sub-TLV in the Vendor-Specific
PPPoE Tags or DHCP Relay Options [rfc4679].
TmnxSubIdentString DisplayString (SIZE (1..32))
The data type TmnxSubIdentString denotes the subscriber
identification string.
TmnxSubIdentStringOrEmpty DisplayString (SIZE (0..32))
The data type TmnxSubIdentStringOrEmpty denotes the subscriber
identification string. The empty string denotes the absence of a
subscriber identification string.
TmnxSubMgtIntDestId TmnxSubMgtIntDestIdOrEmpty (SIZE (1..32))
The data type TmnxSubMgtIntDestId denotes the intermediate
destination id.
TmnxSubMgtIntDestIdOrEmpty DisplayString (SIZE (0..32))
The data type TmnxSubMgtIntDestIdOrEmpty denotes the intermediate
destination id. The empty string denotes the absence of an
intermediate destination id.
TmnxSubMgtOrgStrOrZero DisplayString (SIZE (0..32))
The data type TmnxSubMgtOrgStrOrZero denotes the organization string.
The empty string denotes the absence of an organization string.
TmnxSubMgtOrgString TmnxSubMgtOrgStrOrZero (SIZE (1..32))
The data type TmnxSubMgtOrgStrOrZero denotes the organization string.
TmnxSubNasPortPrefixType INTEGER

none(0) userString(1)

The TmnxSubNasPortPrefixType data type is an enumerated integer that
specifies what prefix will be added to the RADIUS NAS-Port attribute:
- none       (0): No prefix will be added.
- userString (1): A user configurable string will be added.
TmnxSubNasPortSuffixType INTEGER

circuitId(1) none(0) remoteId(2)

The TmnxSubNasPortSuffixType data type is an enumerated integer that
specifies what suffix will be added to the RADIUS NAS-Port attribute:
- none      (0): No suffix will be added.
- circuitId (1): If available, the circuit-id will be added.
- remoteId  (2): If available, the remote-id will be added.
TmnxSubNasPortTypeType INTEGER

config(2) standard(1)

The TmnxSubNasPortTypeType data type is an enumerated integer that
specifies what value will be put in the RADIUS NAS-Port-Type attribute:
- standard  (1): according to the RADIUS specification RFC 2865 section
                 5.41 NAS-Port-Type;
- config    (2): a configured value.
TmnxSubProfileString DisplayString (SIZE (1..16))
The data type TmnxSubProfileString denotes the subscriber
profile string.
TmnxSubProfileStringOrEmpty DisplayString (SIZE (0..16))
The data type TmnxSubProfileStringOrEmpty denotes the subscriber
profile string. The empty string denotes the absence of a
subscriber profile.
TmnxSubRadServAlgorithm INTEGER

direct(1) hashBased(3) roundRobin(2)

The TmnxSubRadServAlgorithm data type is an enumerated integer that
indicates the algorithm used to access the list of configured RADIUS
servers:
- direct     (1): The first server will be used as primary server for
                   all requests, the second as secondary and so on.
- roundRobin (2): The first server will be used as primary server for
                   the first request, the second server as primary for
                   the second request, and so on. If the router gets
                   to the end of the list, it starts again with the
                   first server.
- hashBased  (3): The server will be selected based on a specified
                   hash value.
TmnxSubRadiusAttrType Unsigned32 (0..255)
The TmnxSubRadiusAttrType data type contains a number
that indicates a RADIUS attribute type.
TmnxSubRadiusVendorId Unsigned32 (0..16777215)
The TmnxSubRadiusVendorId data type contains a number
that indicates a RADIUS Vendor-Id.
TmnxSvcOperGrpCreationOrigin INTEGER

manual(1) mvrp(2)

A number used to identify creation origin for the service operational
group.
TmnxThresholdGroupType INTEGER

brMgmtCfFailure(3) brMgmtCfSuccess(2) brMgmtLimit(1) brMgmtTraffic(4) cpmSystem(6) mgIsmSystem(7) pathMgmt(5)

The TmnxThresholdGroupType is an enumerated integer that describes the
group type in threshold based monitoring.

brMgmtLimit - indicates the group for bearer management limit
brMgmtCfSuccess - indicates the group for bearer management
                  call flow success
brMgmtCfFailure - indicates the group for bearer management
                  call flow failure
brMgmtTraffic - indicates the group for bearer management traffic
pathMgmt - indicates the group for path management
cpmSystem - indicates the group for the system of control plane module
mgIsmSystem - indicates the group for the system of mobile gateway
              integrated service module
TmnxTimeInSec Unsigned32 (0..86400)
The data type TmnxTimeInSec describes the Tarrif Time for the Charging
Data Record (CDR).
TmnxTlsGroupId Unsigned32 (1..4094)
A number used to identify a TLS Group. This ID
must be unique within that Service Domain.
TmnxTunnelGroupId Unsigned32 (1..16)
The value of TmnxTunnelGroupId specifies the tunnel-group identifier.
TmnxTunnelGroupIdOrZero Unsigned32 (0..16)
The value of TmnxTunnelGroupId specifies the tunnel-group identifier
including zero indicating that group-id is not specified.
TmnxTunnelID Unsigned32
The identifying value for a BGP-VPRN tunnel.  Depending on the
tunnel type the associated tunnel-id may be an sdp-id, an lsp-id
or zero(0).
TmnxTunnelType INTEGER

bgp(7) bypass(5) gre(4) invalid(6) ldp(2) rsvp(3) sdp(1)

The type of this tunnel entity.
TmnxVPNRouteDistinguisher OCTET STRING (SIZE (8))
The VPRN route distinguisher is a 8-octet object. It contains a
2-octet type field followed by a 6-octet value field. The type
field specify how to interpret the value field.

Type 0 specifies two subfields as a 2-octet administrative field
and a 4-octet assigned number subfield.

Type 1 specifies two subfields as a 4-octet administrative field
which must contain an IP address and a 2-octet assigned number
subfield.

Type 2 specifies two subfields as a 4-octet administrative field
which contains a 4-octet AS number and a 2-octet assigned number
subfield.
TmnxVRtrID Integer32 (1..10240)
A number used to identify a virtual router instance in the system.
TmnxVRtrIDOrZero Integer32 (0..10240)
A number used to identify a virtual router instance in the system.
The number 0 will have special significance in the context the TC
is used.
TmnxVRtrMplsLspID Unsigned32 (0..65535)
A unique value, greater than zero, for each Label
Switched Path in the managed system.
TmnxVcId Unsigned32 (1..4294967295)
A 32 bit number is used to identify a VC(Virtual Circuit).
The VC ID cannot be 0.
TmnxVcIdOrNone Unsigned32 (0 | 1..4294967295)
A 32 bit number is used to identify a VC(Virtual Circuit).
A value of 0 indicates no VC ID is configured or
available.
TmnxVcType INTEGER

atmCell(3) atmSdu(2) atmVccCell(9) atmVpcCell(10) cesopsn(21) cesopsnCas(23) ethernet(5) ethernetVlan(4) frDlci(25) frDlciMartini(1) ipipe(11) mirrorDest(4096) satopE1(17) satopE3(19) satopT1(18) satopT3(20)

The value of TmnxVcType is an enumerated integer that
indicates a Virtual Circuit (VC) type. 'frDlciMartini(1)'
replaces the old 'frDlci' when used over martini tunnels.
TmnxVdoAnalyzerAlarm INTEGER

none(0) poa(3) qos(2) tnc(1)

The data type TmnxVdoAnalyzerAlarm is an enumerated integer that
specifies the severity of the analyzer state alarm. Setting a
variable of this type to 'none' indicates no error level. A value
of 'tnc' indicates a TNC (Tech Non-Conformance) error level.A value
of 'qos' indicates a QOS (Quality of Service) error level. A value
of 'poa' indicates a POA (Program off Air) error level.
TmnxVdoAnalyzerAlarmStates OCTET STRING (SIZE (10))
The data type TmnxVdoAnalyzerAlarmStates is an octet string that
represents the analyzer state for the past 10 seconds. Setting a
variable of this type to 'good'(00) indicates either there was no
alarm during that second or the state of the stream has been
cleared from a prior errored state. A value of 'tnc'(01)indicates
a TNC (Tech Non-Conformance) error occured during that second. A
value of 'qos'(02) indicates a QOS (Quality of Service) error
occured during that second. A value of 'poa'(03) indicates a POA
(Program off Air) error occured during that second.

Since the octet string is 10 bytes long, the 10th byte indicates
the most recent state of the stream. Below is how an example stream
would appear. Each byte in the stream holds an alarm state for a
second.
good (00),  --  stream was good during 1st second
tnc  (01),  --  stream had tnc error during 2nd second
qos  (02),  --  stream had qos error during 3rd second
qos  (02),  --  stream had qos error during 4th second
qos  (02),  --  stream had qos error during 5th second
good (00),  --  stream error was cleared during 6th second
good (00),  --  stream was good during 7th second
tnc  (01),  --  stream had tnc error during 8nd second
poa  (03),  --  stream had poa error during 9th second
good (00)   --  stream error was cleared during 10th second.
TmnxVdoFccServerMode INTEGER

burst(1) dent(2) hybrid(3) none(0)

The TmnxVdoFccServerMode data type is an enumerated integer that
describes the mode of the Fast Channel Change (FCC) server.

A value of 'burst' indicates that the FCC server is enabled
and will send the channel at a nominally faster rate than
the channel was received based on the
TIMETRA-MCAST-PATH-MGMT-MIB::tmnxMcPathVdoPlcyFCCBurst setting.

A value of 'dent' indicates that the FCC server will selectively
discard frames from the original stream based on the value of
TIMETRA-MCAST-PATH-MGMT-MIB::tmnxMcPathVdoPlcyFCCDentThd.

A value of 'hybrid' indicates that the FCC server will use
combination of 'burst' and 'dent' to send the unicast stream to
the client.

A value of 'none' indicates that FCC server is disabled.
TmnxVdoGrpId Unsigned32 (0..4)
TmnxVdoGrpId data type describes the identifier for a video
group.
TmnxVdoGrpIdIndex Unsigned32 (1..4)
TmnxVdoGrpIdIndex data type describes the id of a
TIMETRA-VIDEO-MIB::tmnxVdoGrpEntry and is the primary
index for the table.
TmnxVdoGrpIdOrInherit Integer32 (-1 | 0..4)
The data type describes the identifier for a video group. A value
of '-1' indicates that identifier will be inherited from another
object that is usually in another mib table.
TmnxVdoIfName TNamedItem
The data type describes the name of a video interface. The name of
a video interface must always start with a letter.
TmnxVdoOutputFormat INTEGER

rtp-udp(2) udp(1)

The data type TmnxVdoOutputFormat is an enumerated integer that
specifies the output format of the video stream. Setting a variable
of this type to 'udp' causes the video stream to be of type 'udp'
whereas setting a value of 'rtp-udp' causes the video stream to
be of type 'rtp-udp'.
TmnxVdoPortNumber Unsigned32 (1024..5999 | 6251..65535)
The data type describes the port number of an Internet transport
layer protocol.
TmnxVdoStatInt INTEGER

current(1) interval(2)

The data type TmnxVdoStatInt is an enumerated integer that
specifies the time duration for which the video statistics are
being counted. Setting a variable of this type to 'current' causes
the time duration to be set to one second which is the least
allowed value. A value of 'interval' makes it necessary for some
other MIB object to actually quantify the time interval.
TmnxVpnIpBackupFamily Bits

ipv4(0) ipv6(1)

The value of TmnxVpnIpBackupFamily specifies the respective vpn family
for which backup paths would be enabled.
TmnxVwmCardType INTEGER

not-equipped(1) not-provisioned(0) sfc1A(2) sfc1B(3) sfc1C(4) sfc1D(5) sfc1E(6) sfc1F(7) sfc1G(8) sfc1H(9) sfc2AandB(10) sfc2CandD(11) sfc2EandF(12) sfc2GandH(13) sfc4A-D(14) sfc4E-H(15) sfc8(16) sfd2A-R(29) sfd2B-R(30) sfd2C-R(31) sfd2D-R(32) sfd2E-R(33) sfd2F-R(34) sfd2G-R(35) sfd2H-R(36) sfd2I-R(37) sfd2L-R(38) sfd2M-R(39) sfd2N-R(40) sfd2O-R(41) sfd2P-R(42) sfd2Q-R(43) sfd2R-R(44) sfd4A-R(21) sfd4B-R(22) sfd4C-R(23) sfd4D-R(24) sfd4E-R(25) sfd4F-R(26) sfd4G-R(27) sfd4H-R(28) sfd8A-R(17) sfd8B-R(18) sfd8C-R(19) sfd8D-R(20)

The TmnxVwmCardType data type is an enumerated integer that describes
the values used to identify the VWM Shelf Card type.
TnSwitchID Integer32
A Switch ID that can be used to uniquely identify
 a switching domain on an NE.

     32 29  | 28 23  | 22   17 | 16  1 |
     +--- --+--------+---------+-------+
     |type=1|  shelf |  slot   | unused|
     +------+------- +---------+-------+

type=1 : binary 0001 = shelf/slot config.

     32 29  | 28 23  | 22   17 | 16  1 |
     +--- --+--------+---------+-------+
     |type=2|  packetswitch id | unused|
     +------+------- +---------+-------+

     type=2 : binary 0010 = packetswitch id config.

Used by