TN-LAG-MIB
Nokia (Formerly 'Alcatel-Lucent')This document is the SNMP MIB module to manage and provision the IEEE 802.3ad Link Aggregation Group operation on Nokia 7x50 systems. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
snmptranslate -m TN-LAG-MIB -Tpsnmpwalk -v2c -c <community> -m TN-LAG-MIB <host> 1.3.6.1.4.1.7483.5.1.3.15Imports
| IEEE8023-LAG-MIB | dot3adAggPortEntry |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TN-PORT-MIB | tnPortPortID |
| TN-TC-MIB | TItemLongDescription, TNamedItemOrEmpty, TmnxPortID |
| TROPIC-GLOBAL-REG | tnSRMIBModules, tnSRNotifyPrefix, tnSRObjs |
| TROPIC-SYSTEM-MIB | tnSysSwitchId |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnLagMIBModule | 1.3.6.1.4.1.7483.5.1.3.15 | |||
identity This document is the SNMP MIB module to manage and provision the IEEE 802.3ad Link Aggregation Group operation on Nokia 7x50 systems. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||||
| NtnLagObjects | 1.3.6.1.4.1.7483.6.1.2.15 | |||
| TtnLagConfigTable | 1.3.6.1.4.1.7483.6.1.2.15.2 | NA | ||
table · not-accessible · current Configuration information about each Link Aggregation Group. | ||||
| RtnLagConfigEntry | 1.3.6.1.4.1.7483.6.1.2.15.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the tnLagConfigTable. Each entry represents a Link Aggregation Group. Create or destroy rows to add or remove Link Aggregation Groups (LAG). After tnLagRowStatus is set to active(1), a corresponding entry is created in IEEE8023-LAG-MIB dot3adAggTable. The corresponding entry in IEEE8023-LAG-MIB dot3adAggTable is removed when tnLagRowStatus is set to destroy(6). Use ifAdminStatus to set interface up and down for this LAG entry. Use ifAlias for the interface description.
| ||||
| CtnLagIndex | 1.3.6.1.4.1.7483.6.1.2.15.2.1.1 | LAGInterfaceNumber | NA | |
column · LAGInterfaceNumber · not-accessible · current the number of the Link Aggregation Group. | ||||
| CtnLagRowStatus | 1.3.6.1.4.1.7483.6.1.2.15.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus for this entry. | ||||
| CtnLagPortThreshold | 1.3.6.1.4.1.7483.6.1.2.15.2.1.3 | Integer32 (0..23) | RC | |
column · Integer32 (0..23) · read-create · current tnLagPortThreshold is a threshold for tnLagPortThresholdAction. When a physical port link state changes and the number of operational physical ports is less than or equal to tnLagPortThreshold, tnLagPortThresholdAction is invoked: either the LAG is set operationally down, or the protocols operating on the LAG interface are adjusted. When the number of operational physical ports becomes greater than tnLagPortThreshold, tnLagPortThresholdAction is revoked: either the LAG is set operationally up, or the protocols operating on the LAG interface are adjusted. The value zero means tnLagPortThresholdAction is never invoked. To invoke dynamicCost at every physical port state change, set tnLagPortThreshold to the total number of physical ports configured to be in the Link Aggregation Group. | ||||
| CtnLagPortThresholdAction | 1.3.6.1.4.1.7483.6.1.2.15.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Port Threshold Action is action to take when the number of operational (link up) physical ports is less than tnLagPortThreshold. When a physical port ifOperStatus changes and the number of operational physical ports is less than or equal to tnLagPortThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tnLagIfIndex) goes to down(2). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to match the number of physical ports remaining in the Link Aggregation Group. a tnLagDynamicCostOn notification is generated. When a physical port ifOperStatus changes and the number of operational physical ports is greater than tnLagPortThreshold: - when set to down(1), the ifOperStatus for the Link Aggregation Group (tnLagIfIndex) goes to up(1). - when set to dynamicCost(2), the ifOperStatus stays up(2), but dependent protocols such as OSPF are signaled and will adjust their operation (cost) to be the value as configured. a tnLagDynamicCostOff notification is generated. Regardless of the setting of this object, when the number of operational physical ports goes to zero, the Link Aggregation Group's ifOperStatus goes to down.
| ||||
| CtnLagEnableMarkerGenerator | 1.3.6.1.4.1.7483.6.1.2.15.2.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current enables (true(1)) or disables (false(2)) the Marker Generator protocol. | ||||
| CtnLagEnableLACP | 1.3.6.1.4.1.7483.6.1.2.15.2.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current enables (true(1)) or disables (false(2)) the Link Aggregation Control Protocol (LACP). | ||||
| CtnLagDescription | 1.3.6.1.4.1.7483.6.1.2.15.2.1.7 | TItemLongDescription | RC | |
column · TItemLongDescription · read-create · current discription text for the Link Aggregation Group port. | ||||
| CtnLagDynamicCosting | 1.3.6.1.4.1.7483.6.1.2.15.2.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current When dynamic cost and OSPF autocost are both configured then costing is applied based on the total number of links configured and the cost is advertised inversely proportional to the number of links available at the time, providing the number of links that are up exceeds the configured LAG threshold value at which time the configured threshold action determines if and at what cost this LAG will be advertised. | ||||
| CtnLagLACPMode | 1.3.6.1.4.1.7483.6.1.2.15.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current tnLagLACPMode represents the mode in which LACP will operate. If the value is set to 'passive', LACP places all member ports of a lag into a passive negotiating state. When this is the case member ports of the lag respond to LACP packets they receive but do not initiate LACP packet negotiation. If the value is set to 'active', LACP places all member ports of a lag in to an active negotiation state. When this occurs the port will initiate LACP negotiation immediately once the port achieves link up state. At least one of the peer lag ports must be configured as active to initiate LACP. The default mode is passive.
| ||||
| CtnLagLACPAdminKeyAutogen | 1.3.6.1.4.1.7483.6.1.2.15.2.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current tnLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key in the dot3adAggActorAdminKey object was auto generated. tnLagLACPAdminKeyAutogen is set to 'false', if the lag administrative key was manually configured. | ||||
| CtnLagLACPTransmitInterval | 1.3.6.1.4.1.7483.6.1.2.15.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current tnLagLACPTransmitInterval configures the timer interval for periodic transmission of LACP packets. If set to 'slow', LACP packets are transmitted every 30 seconds. If set to 'fast', LACP packets are transmitted every second.
| ||||
| CtnLagAccessAdaptQos | 1.3.6.1.4.1.7483.6.1.2.15.2.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tnLagAccessAdaptQos specifies how the LAG SAP queue and
virtual scheduler buffering and rate parameters are adapted over
multiple active MDAs.
link (1) - The LAG will create the SAP queues and virtual
schedulers with the actual parameters on each MDA.
distribute (2) - Each MDA will receive a fraction of the SAP and
scheduler parameters.
| ||||
| CtnLagLACPXmitStdby | 1.3.6.1.4.1.7483.6.1.2.15.2.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tnLagLACPXmitStdby specifies whether or not LACP messages are transmitted on standby-links. | ||||
| CtnLagLACPSelCrit | 1.3.6.1.4.1.7483.6.1.2.15.2.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tnLagLACPSelCrit specifies which selection criteria should be used to select the active sub-group.
| ||||
| CtnLagLACPSelCritSlaveToPartner | 1.3.6.1.4.1.7483.6.1.2.15.2.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tnLagLACPSelCritSlaveToPartner specifies together with tnLagLACPSelCrit selection criteria should be used to select the active sub-group. The term 'eligible member' refers to a lag-member link which can potentially become active. This means it is oper up, and not disabled for use by the remote side. The object tnLagLACPSelCritSlaveToPartner can be used to control whether ornot this latter condition is taken into account. | ||||
| CtnLagLACPNbrOfSubGroups | 1.3.6.1.4.1.7483.6.1.2.15.2.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of tnLagLACPNbrOfSubGroups indicates the number of subgroups configured in this LAG. | ||||
| CtnLagholdTimeDown | 1.3.6.1.4.1.7483.6.1.2.15.2.1.17 | Unsigned32 (0..2000) | RC | |
column · Unsigned32 (0..2000) · read-create · current The value of tnLagholdTimeDown specifies the timer in 0.1 second units which controls the delay between detecting that a LAG is down (all active ports are down) and reporting it to the higher levels. The default value for this timer is 0, i.e. the higher levels are informed directly. A non zero value may be configured e.g. when active/standby signalling is used in a 1:1 fashion to avoid that the higher levels are informed during the small time interval between detecting that the LAG is down and the time needed to activate the standby system.
| ||||
| CtnLagPortType | 1.3.6.1.4.1.7483.6.1.2.15.2.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tnLagPortType specifies the type of ports allowed in this LAG. A value of 'standard (1)' allows all non-HSMDA type ports to be added to this LAG. A value of 'hsmda (2)' limits the LAG members to be HSMDA ports only.
| ||||
| CtnLagPerFpIngQueuing | 1.3.6.1.4.1.7483.6.1.2.15.2.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current The value of tnLagPerFpIngQueuing specifies whether a more efficient method of queue allocation for LAG SAPs should be utilized. An 'inconsistentValue' error is returned if this object is set to a different value when there are existing port members in the LAG. | ||||
| CtnLagAlmProfName | 1.3.6.1.4.1.7483.6.1.2.15.2.1.20 | OCTET STRING (SIZE (1..40)) | RC | |
column · OCTET STRING (SIZE (1..40)) · read-create · current . | ||||
| CtnLagFDMode | 1.3.6.1.4.1.7483.6.1.2.15.2.1.21 | LagFDMode | RC | |
column · LagFDMode · read-create · current The value of tnLagFDMode specifies the lag Frame Distribution selection mode. | ||||
| CtnLagLACPVersionNumber | 1.3.6.1.4.1.7483.6.1.2.15.2.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current The value of tnLagLACPVersionNumber specifies the LACP version number.
| ||||
| TtnLagOperationTable | 1.3.6.1.4.1.7483.6.1.2.15.3 | NA | ||
table · not-accessible · current Operational information about each Link Aggregation Group. | ||||
| RtnLagOperationEntry | 1.3.6.1.4.1.7483.6.1.2.15.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the tnLagOperationTable. Each entry represents an active Link Aggregation Group.
| ||||
| CtnLagIfIndex | 1.3.6.1.4.1.7483.6.1.2.15.3.1.1 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current ifIndex for the Link Aggregation Group. This value is zero when tnLagRowStatus is not active(1). | ||||
| CtnLagConfigLastChange | 1.3.6.1.4.1.7483.6.1.2.15.3.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current last change timestamp records when any object in tnLagConfigTable was set. | ||||
| CtnLagPortThresholdFalling | 1.3.6.1.4.1.7483.6.1.2.15.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current counts the number of linkDown or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being less than or equal to tnLagPortThreshold value. | ||||
| CtnLagPortThresholdRising | 1.3.6.1.4.1.7483.6.1.2.15.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current counts the number of linkUp or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being greater than tnLagPortThreshold value. | ||||
| CtnLagLACPOperVersionNumber | 1.3.6.1.4.1.7483.6.1.2.15.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tnLagLACPOperVersionNumber specifies the operational LACP version number of LAG.
| ||||
| StnLagScalar1 | 1.3.6.1.4.1.7483.6.1.2.15.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item. | ||||
| TtnLagMemberTable | 1.3.6.1.4.1.7483.6.1.2.15.5 | NA | ||
table · not-accessible · current The tnLagMemberTable has an entry for each Port that is part of a LAG. | ||||
| RtnLagMemberEntry | 1.3.6.1.4.1.7483.6.1.2.15.5.1 | NA | ||
row · not-accessible · current Each row entry represents a particular port in a LAG. Entries are automatically created when a Port is provisioned as part of a LAG, i.e. when tnPortLagId from TIMETRA-PORT-MIB.mib is changed from its default value of '0'.
| ||||
| CtnLagMemberPortName | 1.3.6.1.4.1.7483.6.1.2.15.5.1.1 | TNamedItemOrEmpty | RO | |
column · TNamedItemOrEmpty · read-only · current The value of tnLagMemberPortName indicates the name of the port that is a member of the LAG used to index into tnLagMemberTable. This is a read-only object that is the same as tnPortName from TIMETRA-PORT-MIB.mib. | ||||
| CtnLagMemberPortIsPrimary | 1.3.6.1.4.1.7483.6.1.2.15.5.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current The value of tnLagMemberPortIsPrimary indicates whether the port used to index into tnLagMemberTable is the primary port of the LAG used to index into tnLagMemberTable. | ||||
| TtnLagPortTable | 1.3.6.1.4.1.7483.6.1.2.15.6 | NA | ||
table · not-accessible · current The tnLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features. | ||||
| RtnLagPortEntry | 1.3.6.1.4.1.7483.6.1.2.15.6.1 | NA | ||
row · not-accessible · current A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device. The tnLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features.
| ||||
| CtnLagPortSubgroup | 1.3.6.1.4.1.7483.6.1.2.15.6.1.1 | LAGSubgroup | RW | |
column · LAGSubgroup · read-write · current The value of tnLagPortSubgroup specifies the subgroup to which the port in this LAG is assigned. | ||||
| CtnLagPortActiveStdby | 1.3.6.1.4.1.7483.6.1.2.15.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of tnLagPortActiveStdby indicates active standby state of this port in the LAG.
| ||||
| CtnLagPortLinkId | 1.3.6.1.4.1.7483.6.1.2.15.6.1.3 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The value of tnLagPortLinkId specifies the Link ID to which the port in this LAG is assigned. | ||||
| TtnLagConfigXTable | 1.3.6.1.4.1.7483.6.1.2.15.7 | NA | ||
table · not-accessible · current Extension information about each Link Aggregation Group. | ||||
| RtnLagConfigXEntry | 1.3.6.1.4.1.7483.6.1.2.15.7.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the tnLagConfigXTable. Each entry represents an active Link Aggregation Group.
| ||||
| CtnLagConfigXIngressAvailBandwidth | 1.3.6.1.4.1.7483.6.1.2.15.7.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the remaining Ingress Bandwidth of the LAG. | ||||
| CtnLagConfigXEgressAvailBandwidth | 1.3.6.1.4.1.7483.6.1.2.15.7.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicate the remaining Egress Bandwidth of the LAG. | ||||
| CtnLagConfigXMaxPortSize | 1.3.6.1.4.1.7483.6.1.2.15.7.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current Indicate the number of aggregated port.Allow to set the size of the LAG. | ||||
| CtnLagConfigXNumSelectedPorts | 1.3.6.1.4.1.7483.6.1.2.15.7.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current indicate the number of selected ports for the LAG. | ||||
| CtnLagConfigXNumAttachedPorts | 1.3.6.1.4.1.7483.6.1.2.15.7.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current indicate the number of attached ports for the LAG. | ||||
| CtnLagConfigXPrimaryPort | 1.3.6.1.4.1.7483.6.1.2.15.7.1.6 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Specify the primary port for the LAG group. | ||||
| CtnLagAdminState | 1.3.6.1.4.1.7483.6.1.2.15.7.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current .
| ||||
| CtnLagLPTConsequenceAction | 1.3.6.1.4.1.7483.6.1.2.15.7.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the Lag LPT ConsequenceAction.
| ||||
| CtnLagLosProp | 1.3.6.1.4.1.7483.6.1.2.15.7.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The LOS propagation.
| ||||
| CtnLagTPID | 1.3.6.1.4.1.7483.6.1.2.15.7.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current The TPID for the LagGroup.
| ||||
| CtnLagMtu | 1.3.6.1.4.1.7483.6.1.2.15.7.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | ||||
| CtnLagSpeed | 1.3.6.1.4.1.7483.6.1.2.15.7.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| TtnLagPsfdMappingConfigTable | 1.3.6.1.4.1.7483.6.1.2.15.8 | NA | ||
table · not-accessible · current This table allows the user to specify a Lag PSFD mapping between a set of vlan ids and a link priority list of lag member ports. The table can be created regardless what value tnLagFDMode has in order to reduce service interruption time when tnLagFDMode switches from 'hardwareHashing' to 'psfd'. The psfd mappings created via the table is only used when tnLagFDMode has value 'psfd'. The table takes the user input and has only one entry at any time. | ||||
| RtnLagPsfdMappingConfigEntry | 1.3.6.1.4.1.7483.6.1.2.15.8.1 | NA | ||
row · not-accessible · current An entry of tnLagPsfdMappingConfigTable.
| ||||
| CtnLagPsfdMappingRowStatus | 1.3.6.1.4.1.7483.6.1.2.15.8.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus for this entry. | ||||
| CtnLagPsfdMappingVlanIdRanges | 1.3.6.1.4.1.7483.6.1.2.15.8.1.2 | LagPsfdMappingVlanRanges | RC | |
column · LagPsfdMappingVlanRanges · read-create · current Vlan id ranges for a lag PSFD mapping. | ||||
| CtnLagPsfdMappingLinkIdList | 1.3.6.1.4.1.7483.6.1.2.15.8.1.3 | LagPsfdMappingLinkIdList | RC | |
column · LagPsfdMappingLinkIdList · read-create · current Priority list of link ids of lag member ports for a lag PSFD mapping. Note that the first link id in the list has the highest priority and the last link id has the lowest priority. | ||||
| TtnLagPsfdMappingLinkIdListBasedInfoTable | 1.3.6.1.4.1.7483.6.1.2.15.12 | NA | ||
table · not-accessible · current This is a read only table that stores lag's PSFD mappings sorted by link id priority list of lag member ports. User can display all PSFD mappings for the lag, such as: Link Priority List Port Priority List Vlans ---------------------------------------------------------------------------- 1 1/3/1 4, 5, 6 1, 4 1/3/1, 1/4/1 cp-3 4, 1 1/4/1, 1/3/1 0, 30 where cp-3 (connection profile id 3) has vlan ranges: 10-15 20 Note that the table contains following entries for the example above: xxLinkIdListIndex xxLowVlanIndex xxHighVlanIndex xxPortIdList xxConnProfId ------------------------------------------------------------------------------ 1 4 4 1/3/1 0 1 5 5 1/3/1 0 1 6 6 1/3/1 0 1, 4 10 15 1/3/1, 1/4/1 3 1, 4 20 20 1/3/1, 1/4/1 3 4, 1 0 0 1/4/1, 1/3/1 0 | ||||
| RtnLagPsfdMappingLinkIdListBasedInfoEntry | 1.3.6.1.4.1.7483.6.1.2.15.12.1 | NA | ||
row · not-accessible · current Each entry represents a PSFD mapping between a vlan range or single vlan and a link id priority list | ||||
| CtnLagPsfdMappingLinkIdListIndex | 1.3.6.1.4.1.7483.6.1.2.15.12.1.1 | LagPsfdMappingLinkIdList | NA | |
column · LagPsfdMappingLinkIdList · not-accessible · current A lag PSFD link id priority list, used as MIB index | ||||
| CtnLagPsfdMappingLowVlanIndex | 1.3.6.1.4.1.7483.6.1.2.15.12.1.2 | Integer32 (0..4094) | NA | |
column · Integer32 (0..4094) · not-accessible · current Used as MIB index, low vlan of a vlan range or single vlan with PSFD mapping to the link id priority list (ie tnLagPsfdMappingLinkIdListIndex). For the single vlan case, low vlan and high vlan have the same value | ||||
| CtnLagPsfdMappingHighVlanIndex | 1.3.6.1.4.1.7483.6.1.2.15.12.1.3 | Integer32 (0..4094) | NA | |
column · Integer32 (0..4094) · not-accessible · current Used as MIB index, high vlan of a vlan range or single vlan with PSFD mapping to the link id priority list (ie tnLagPsfdMappingLinkIdListIndex). For the single vlan case, low vlan and high vlan have the same value | ||||
| CtnLagPsfdMappingLinkIdListBasedInfoPortIdList | 1.3.6.1.4.1.7483.6.1.2.15.12.1.4 | LagPsfdMappingPortIdList | RO | |
column · LagPsfdMappingPortIdList · read-only · current Port id priority list for the link id priority list (ie tnLagPsfdMappingLinkIdListIndex) | ||||
| CtnLagPsfdMappingConnProfId | 1.3.6.1.4.1.7483.6.1.2.15.12.1.5 | LagPsfdMappingConnProfId | RO | |
column · LagPsfdMappingConnProfId · read-only · current Id of the connection profile to which the vlan range in an entry of this mib table belongs. Note that connection profile id 0 is used for vlan range that don't belong to any connection profile. | ||||
| TtnLagPsfdMappingPortIdBasedInfoTable | 1.3.6.1.4.1.7483.6.1.2.15.13 | NA | ||
table · not-accessible · current This is a read only table that stores lag's PSFD mappings sorted by port ids of lag member ports. The table allows the user to display PSFD mappings based on port id. For example: Port-id Link-id VLANs --------------------------------------------- 1/3/1 1 4, 5, 6, 10-15, 20, 0, 30 Note that the table contains following entries for the example above: tnPortPortID xxLinkIdListIndex xxLowVlanIndex xxHighVlanIndex xxLinkId -------------------------------------------------------------------------- 1/3/1 1 4 4 1 1/3/1 1 5 5 1 1/3/1 1 6 6 1 1/3/1 1, 4 10 15 1 1/3/1 1, 4 20 20 1 1/3/1 4, 1 0 0 1 1/3/1 4, 1 30 30 1 | ||||
| RtnLagPsfdMappingPortIdBasedInfoEntry | 1.3.6.1.4.1.7483.6.1.2.15.13.1 | NA | ||
row · not-accessible · current Each entry represents all PSFD mappings involving the lag member port indexed by port id (ie tnPortPortID) | ||||
| CtnLagPsfdMappingPortIdBasedInfoLinkId | 1.3.6.1.4.1.7483.6.1.2.15.13.1.1 | LagPsfdMappingLinkId | RO | |
column · LagPsfdMappingLinkId · read-only · current Link id for the lag member port (ie tnPortPortID) | ||||
| TtnLagPsfdMappingLinkIdBasedInfoTable | 1.3.6.1.4.1.7483.6.1.2.15.14 | NA | ||
table · not-accessible · current This is a read only table that stores lag's PSFD mappings sorted by link id of lag member ports. The table allows the user to display PSFD mappings based on link id. For example: Link-id Port-id VLANs ---------------------------------------------------------------------------- 1 1/3/1 4, 5, 6, 10-15, 20, 0, 30 Note that the table contains following entries for the example above: xxLinkIdIndex xxLinkIdListIndex xxLowVlanIndex xxHighVlanIndex xxPortId --------------------------------------------------------------------------- 1 1 4 4 1/3/1 1 1 5 5 1/3/1 1 1 6 6 1/3/1 1 1, 4 10 15 1/3/1 1 1, 4 20 20 1/3/1 1 4, 1 0 0 1/3/1 1 4, 1 30 30 1/3/1 | ||||
| RtnLagPsfdMappingLinkIdBasedInfoEntry | 1.3.6.1.4.1.7483.6.1.2.15.14.1 | NA | ||
row · not-accessible · current Each entry represents all PSFD mappings involving the lag member port indexed by link id (ie tnLagPsfdMappingLinkIdIndex) | ||||
| CtnLagPsfdMappingLinkIdIndex | 1.3.6.1.4.1.7483.6.1.2.15.14.1.1 | LagPsfdMappingLinkId | NA | |
column · LagPsfdMappingLinkId · not-accessible · current Link Id of a lag member port, used as MIB index | ||||
| CtnLagPsfdMappingLinkIdBasedInfoPortId | 1.3.6.1.4.1.7483.6.1.2.15.14.1.2 | TmnxPortID | RO | |
column · TmnxPortID · read-only · current Port Id for lag member port whose link id is tnLagPsfdMappingLinkIdIndex | ||||
| TtnLagPsfdMappingVlanIdBasedInfoTable | 1.3.6.1.4.1.7483.6.1.2.15.15 | NA | ||
table · not-accessible · current This is a read only table that stores lag's PSFD mappings sorted by vlan id. The table allows the user to display PSFD mappings based on vlan id. For example: Vlan VlanRange Link Priority List Port Priority List ------------------------------------------------------------- 4 4 1 1/3/1 10 10-15 1, 4 1/3/1, 1/4/1 12 10-12 1, 4 1/3/1, 1/4/1 Note that the table contains following entries for the example above: xxVlanIndex xxLinkIdList xxPortIdList xxLowVlan xxHighVlan -------------------------------------------------------------- 4 1 1/3/1 4 4 10 1, 4 1/3/1, 1/4/1 10 15 12 1, 4 1/3/1, 1/4/1 10 15 | ||||
| RtnLagPsfdMappingVlanIdBasedInfoEntry | 1.3.6.1.4.1.7483.6.1.2.15.15.1 | NA | ||
row · not-accessible · current Each entry represents the PSFD mapping involving the vlan id (ie tnLagPsfdMappingVlanIndex) | ||||
| CtnLagPsfdMappingVlanIndex | 1.3.6.1.4.1.7483.6.1.2.15.15.1.1 | Integer32 (0..4094) | NA | |
column · Integer32 (0..4094) · not-accessible · current vlan id, used as MIB index | ||||
| CtnLagPsfdMappingVlanIdBasedInfoLinkIdList | 1.3.6.1.4.1.7483.6.1.2.15.15.1.2 | LagPsfdMappingLinkIdList | RO | |
column · LagPsfdMappingLinkIdList · read-only · current Link Id list of the PSFD mapping involving the vlan id. | ||||
| CtnLagPsfdMappingVlanIdBasedInfoPortIdList | 1.3.6.1.4.1.7483.6.1.2.15.15.1.3 | LagPsfdMappingPortIdList | RO | |
column · LagPsfdMappingPortIdList · read-only · current Port id priority list for the link id priority list of the PSFD mapping involving the vlan id. | ||||
| CtnLagPsfdMappingVlanIdBasedInfoLowVlan | 1.3.6.1.4.1.7483.6.1.2.15.15.1.4 | Integer32 (0..4094) | RO | |
column · Integer32 (0..4094) · read-only · current Low vlan of a vlan range or single vlan involving the vlan id. The vlan range or single vlan maps to the link id priority list in lag's PSFD mapping. For the single vlan case, low vlan and high vlan have same value | ||||
| CtnLagPsfdMappingVlanIdBasedInfoHighVlan | 1.3.6.1.4.1.7483.6.1.2.15.15.1.5 | Integer32 (0..4094) | RO | |
column · Integer32 (0..4094) · read-only · current High vlan of a vlan range or single vlan involving the vlan id. The vlan range or single vlan maps to the link id priority list in lag's PSFD mapping. For the single vlan case, low vlan and high vlan have same value | ||||
| TtnLagCommandTable | 1.3.6.1.4.1.7483.6.1.2.15.20 | NA | ||
table · not-accessible · current The tnLagCommandTable consists of one-shot action commands that force or clear active standby state on LAG subgroups. | ||||
| RtnLagCommandEntry | 1.3.6.1.4.1.7483.6.1.2.15.20.1 | NA | ||
row · not-accessible · current The tnLagCommandEntry contains the commands available to execute on an existing LAG. Rows in this table are created and destroyed by the system
| ||||
| CtnLagSubgroup | 1.3.6.1.4.1.7483.6.1.2.15.20.1.1 | LAGSubgroup | NA | |
column · LAGSubgroup · not-accessible · current The value of tnLagSubgroup specifies the subgroup on which the command is executed. | ||||
| CtnLagCommand | 1.3.6.1.4.1.7483.6.1.2.15.20.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tnLagCommand specifies the command.
| ||||
| CtnLagCommandActiveStdby | 1.3.6.1.4.1.7483.6.1.2.15.20.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The value of tnLagCommandActiveStdby indicates active standby state the subgroup is forced to be. This parameter is not required for clearForce command.
| ||||
| CtnLagCommandAllMc | 1.3.6.1.4.1.7483.6.1.2.15.20.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current If tnLagCommandAllMc is 'true', all MC-LAGs are forced to switch or clear. | ||||
| CtnLagCommandMcPeerIpType | 1.3.6.1.4.1.7483.6.1.2.15.20.1.5 | InetAddressType | RW | |
column · InetAddressType · read-write · current The value of tnLagCommandMcPeerIpType specifies the address type of tnLagCommandMcPeerIpAddr. | ||||
| CtnLagCommandMcPeerIpAddr | 1.3.6.1.4.1.7483.6.1.2.15.20.1.6 | InetAddress (SIZE (0 | 4)) | RW | |
column · InetAddress (SIZE (0 | 4)) · read-write · current The value of tnLagCommandMcPeerIpAddr specifies the address of the MC-LAG peer that is forced to switch or clear. | ||||
| StnLagScalar2 | 1.3.6.1.4.1.7483.6.1.2.15.101 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item. | ||||
| StnLagScalar3 | 1.3.6.1.4.1.7483.6.1.2.15.102 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current . | ||||
| NtnLagNotifyPrefix | 1.3.6.1.4.1.7483.6.1.3.15 | |||
| NtnLagNotifications | 1.3.6.1.4.1.7483.6.1.3.15.0 | |||
| !tnLagDynamicCostOn | 1.3.6.1.4.1.7483.6.1.3.15.0.1 | |||
notification · current the number of phyical ports in the Link Aggregation Group is less than or equal to tnLagPortThreshold value.
| ||||
| !tnLagDynamicCostOff | 1.3.6.1.4.1.7483.6.1.3.15.0.2 | |||
notification · current the number of phyical ports in the Link Aggregation Group is greater than tnLagPortThreshold value.
| ||||
Textual conventions
LAGInterfaceNumberInteger32 (1..240)The unique number identifying a LAG interface. There are maximum 64 LAG interfaces, when the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1).
LAGSubgroupInteger32 (-2 | -1 | 1..8)This type specifies a LAG subgroup. The value -2 denotes 'auto-iom', whereby the subgroup is defined based on the IOM (i.e. all ports of the same IOM are assigned to the same subgroup). The value -1 denotes 'auto-mda', whereby the subgroup is defined based on the MDA.
LagFDModeINTEGERhardwareHashing(0)psfd(1)LagFDMode data type is an enumerated integer that describes the values used to identify the lag Frame Distribution mode.
LagPsfdMappingConnProfIdUnsigned32 (0 | 1..1000)A number used to identify a connection profile in lag PSFD mapping where a vlan range belongs to the connection profile. The value 0 is used to identify for a vlan range not belonging to any connection profile.
LagPsfdMappingLinkIdInteger32 (0..65535)The linkId is only applicable when Lag PSFD is configured. It associates a Lag member port to a physical link. This parameter is only applicable to a LAG in packetswitch. 0 represents an invalid linkId.
LagPsfdMappingLinkIdListOCTET STRING (SIZE (0..34))Each group of 2 octets in this string specifies a 16-bit link ID. The link IDs are stored in network byte order; i.e. octet N corresponds to the most significant 8 bits of the link ID, and octet N+1 correspond to the least significant 8 bits. The list is terminated by the null link ID (0x0000). The link IDs in this list are not required to be sorted in any specific order. The list is large enough to hold up to 16 link IDs (the maximum number of Lag member ports) plus the null terminator.
LagPsfdMappingPortIdListOCTET STRING (SIZE (0..68))Each group of 4 octets in this string specifies a 32-bit Port ID. The Port IDs are stored in network byte order; i.e. octet N corresponds to the most significant 8 bits of the Port ID, and octet N+3 correspond to the least significant 8 bits. The list is terminated by the null Port ID. The Port IDs in this list are not required to be sorted in any specific order. The list is large enough to hold up to 16 Port IDs (the maximum number of Lag member ports) plus the null terminator.
LagPsfdMappingVlanRangesDisplayString (SIZE (0..512))LagPsfdMappingVlanRanges is a string that represents a list of vlan ranges for a lag PSFD mapping configuration. Each vlan range is either a single vlan id or a vlan range specified as two vlan ids separated by '-'.
Traps / Notifications
- tnLagDynamicCostOff
1.3.6.1.4.1.7483.6.1.3.15.0.2 - tnLagDynamicCostOn
1.3.6.1.4.1.7483.6.1.3.15.0.1