DKSF-70-6-X-X-1
ZAO Light CommunicationGeneric MIB for NetPing remote sensing and control
snmptranslate -m DKSF-70-6-X-X-1 -Tpsnmpwalk -v2c -c <community> -m DKSF-70-6-X-X-1 <host> 1.3.6.1.4.1.25728.70Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nlightcom | 1.3.6.1.4.1.25728 | |||
| IuniPingServerSolutionV3 | 1.3.6.1.4.1.25728.70 | |||
identity Generic MIB for NetPing remote sensing and control | ||||
| NnpTrapInfo | 1.3.6.1.4.1.25728.90 | |||
| SnpTrapEmailTo | 1.3.6.1.4.1.25728.90.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current user-specified e-mail for NetPing Trap Forwarding Service | ||||
| NnpReboot | 1.3.6.1.4.1.25728.911 | |||
| SnpSoftReboot | 1.3.6.1.4.1.25728.911.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Write 1 to reboot device after current operations completition | ||||
| SnpResetStack | 1.3.6.1.4.1.25728.911.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Write 1 to re-initialize network stack | ||||
| SnpForcedReboot | 1.3.6.1.4.1.25728.911.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Write 1 to immediate forced reboot | ||||
| NnpGsm | 1.3.6.1.4.1.25728.3800 | |||
| NnpGsmInfo | 1.3.6.1.4.1.25728.3800.1 | |||
| SnpGsmFailed | 1.3.6.1.4.1.25728.3800.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Firmware's GSM module status
| ||||
| SnpGsmRegistration | 1.3.6.1.4.1.25728.3800.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of modem registration in GSM network (AT+CREG? result)
| ||||
| SnpGsmStrength | 1.3.6.1.4.1.25728.3800.1.3 | INTEGER (0..255) | RO | |
scalar · INTEGER (0..255) · read-only · current GSM signal strength. 0..31 = 0..100%, 99 = unknown or n/a, 255 = updating info | ||||
| SnpGsmSendSmsUtf8 | 1.3.6.1.4.1.25728.3800.1.9 | DisplayString | RW | |
scalar · DisplayString · read-write · current Send arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup Cyrillic characters must be in UTF8 encoding. | ||||
| SnpGsmSendSmsWin1251 | 1.3.6.1.4.1.25728.3800.1.10 | DisplayString | RW | |
scalar · DisplayString · read-write · current Send arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup Cyrillic characters must be in Win1251 encoding. | ||||
| NnpGsmTraps | 1.3.6.1.4.1.25728.3800.2 | |||
| NnpGsmTrapPrefix | 1.3.6.1.4.1.25728.3800.2.0 | |||
| !npGsmTrap | 1.3.6.1.4.1.25728.3800.2.0.1 | |||
notification · current GSM modem or SMS firmware problems
| ||||
| NnpRelay | 1.3.6.1.4.1.25728.5500 | |||
| TnpRelayTable | 1.3.6.1.4.1.25728.5500.5 | NA | ||
table · not-accessible · current Watchdog and outlet/relay control table | ||||
| RnpRelayEntry | 1.3.6.1.4.1.25728.5500.5.1 | NA | ||
| CnpRelayN | 1.3.6.1.4.1.25728.5500.5.1.1 | INTEGER (1) | RO | |
column · INTEGER (1) · read-only · current The N of output relay | ||||
| CnpRelayMode | 1.3.6.1.4.1.25728.5500.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Control of relay: -1 - flip between on(1) and off(0) 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on by schedule) 5 - logic
| ||||
| CnpRelayStartReset | 1.3.6.1.4.1.25728.5500.5.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Write 1 to start reset (switch relay off for some time) | ||||
| CnpRelayMemo | 1.3.6.1.4.1.25728.5500.5.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Relay memo | ||||
| CnpRelayState | 1.3.6.1.4.1.25728.5500.5.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on
| ||||
| NnpIr | 1.3.6.1.4.1.25728.7900 | |||
| NnpIrCtrl | 1.3.6.1.4.1.25728.7900.1 | |||
| SnpIrPlayCmd | 1.3.6.1.4.1.25728.7900.1.1 | INTEGER (1..16) | RW | |
scalar · INTEGER (1..16) · read-write · current Write IR command number to send IR command | ||||
| SnpIrReset | 1.3.6.1.4.1.25728.7900.1.2 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Write 1 to reset IR transiever. After reset, send IR command and check npIrStatus. | ||||
| SnpIrStatus | 1.3.6.1.4.1.25728.7900.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current IR transiever status
| ||||
| NnpSmoke | 1.3.6.1.4.1.25728.8200 | |||
| TnpSmokeTable | 1.3.6.1.4.1.25728.8200.1 | NA | ||
table · not-accessible · current Smoke Sensors Table | ||||
| RnpSmokeEntry | 1.3.6.1.4.1.25728.8200.1.1 | NA | ||
| CnpSmokeSensorN | 1.3.6.1.4.1.25728.8200.1.1.1 | INTEGER (1..4) | RO | |
column · INTEGER (1..4) · read-only · current The id of 1Wire Smoke sensor, 1 to 4 | ||||
| CnpSmokeStatus | 1.3.6.1.4.1.25728.8200.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Status of Smoke sensor
| ||||
| CnpSmokePower | 1.3.6.1.4.1.25728.8200.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Controls power on Smoke sensor current loop
| ||||
| CnpSmokeReset | 1.3.6.1.4.1.25728.8200.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Write 1 to switch off for approx. 10s to reset sensor | ||||
| CnpSmokeMemo | 1.3.6.1.4.1.25728.8200.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Smoke sensor memo | ||||
| NnpSmokeTraps | 1.3.6.1.4.1.25728.8200.2 | |||
| NnpSmokeTrapPrefix | 1.3.6.1.4.1.25728.8200.2.0 | |||
| !npSmokeTrap | 1.3.6.1.4.1.25728.8200.2.0.1 | |||
notification · current Status of 1W Smoke sensor has changed | ||||
| SnpSmokeTrapSensorN | 1.3.6.1.4.1.25728.8200.2.1 | INTEGER (1..4) | RO | |
scalar · INTEGER (1..4) · read-only · current The id of 1Wire Smoke sensor, 1 to 4 | ||||
| SnpSmokeTrapStatus | 1.3.6.1.4.1.25728.8200.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current New status of Smoke sensor
| ||||
| SnpSmokeTrapMemo | 1.3.6.1.4.1.25728.8200.2.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current Smoke sensor memo | ||||
| NnpCurLoop | 1.3.6.1.4.1.25728.8300 | |||
| TnpCurLoopTable | 1.3.6.1.4.1.25728.8300.1 | NA | ||
table · not-accessible · current Current loop sensors Table | ||||
| RnpCurLoopEntry | 1.3.6.1.4.1.25728.8300.1.1 | NA | ||
| CnpCurLoopN | 1.3.6.1.4.1.25728.8300.1.1.1 | INTEGER (1..8) | RO | |
column · INTEGER (1..8) · read-only · current Index of current loop, 1 to max supported | ||||
| CnpCurLoopStatus | 1.3.6.1.4.1.25728.8300.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
| ||||
| CnpCurLoopI | 1.3.6.1.4.1.25728.8300.1.1.3 | INTEGER (0..99999) | RO | |
column · INTEGER (0..99999) · read-only · current Loop current, mA | ||||
| CnpCurLoopV | 1.3.6.1.4.1.25728.8300.1.1.4 | INTEGER (0..99999) | RO | |
column · INTEGER (0..99999) · read-only · current Voltage drop on the loop, mV | ||||
| CnpCurLoopR | 1.3.6.1.4.1.25728.8300.1.1.5 | INTEGER (0..99999) | RO | |
column · INTEGER (0..99999) · read-only · current Resistance of the loop, Ohm | ||||
| CnpCurLoopPower | 1.3.6.1.4.1.25728.8300.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Control of loop power 0=Off, 1=On, 2=reset by off/on power
| ||||
| NnpCurLoopTraps | 1.3.6.1.4.1.25728.8300.2 | |||
| NnpCurLoopTrapPrefix | 1.3.6.1.4.1.25728.8300.2.0 | |||
| !npCurLoopTrap | 1.3.6.1.4.1.25728.8300.2.0.1 | |||
notification · current Status of current loop N has changed! | ||||
| SnpCurLoopTrapN | 1.3.6.1.4.1.25728.8300.2.1 | INTEGER (1..8) | RO | |
scalar · INTEGER (1..8) · read-only · current Index of current loop, which status has changed | ||||
| SnpCurLoopTrapStatus | 1.3.6.1.4.1.25728.8300.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
| ||||
| SnpCurLoopTrapI | 1.3.6.1.4.1.25728.8300.2.3 | INTEGER (0..99999) | RO | |
scalar · INTEGER (0..99999) · read-only · current Loop current, mA | ||||
| SnpCurLoopTrapV | 1.3.6.1.4.1.25728.8300.2.4 | INTEGER (0..99999) | RO | |
scalar · INTEGER (0..99999) · read-only · current Voltage drop on the loop, mV | ||||
| SnpCurLoopTrapR | 1.3.6.1.4.1.25728.8300.2.5 | INTEGER (0..99999) | RO | |
scalar · INTEGER (0..99999) · read-only · current Resistance of the loop, Ohm | ||||
| SnpCurLoopTrapPower | 1.3.6.1.4.1.25728.8300.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Status of loop power 0=Off, 1=On
| ||||
| NnpRelHumidity | 1.3.6.1.4.1.25728.8400 | |||
| TnpRelHumTable | 1.3.6.1.4.1.25728.8400.1 | NA | ||
table · not-accessible · current Humidity+Temperature Sensors Table | ||||
| RnpRelHumEntry | 1.3.6.1.4.1.25728.8400.1.1 | NA | ||
| CnpRelHumN | 1.3.6.1.4.1.25728.8400.1.1.1 | INTEGER (1..4) | RO | |
column · INTEGER (1..4) · read-only · current Index of Humidity+Temperature sensor, 1 to max supported | ||||
| CnpRelHumValue | 1.3.6.1.4.1.25728.8400.1.1.2 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current Relative humidity value, % | ||||
| CnpRelHumStatus | 1.3.6.1.4.1.25728.8400.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Status of Relative Humiduty
| ||||
| CnpRelHumTempValue | 1.3.6.1.4.1.25728.8400.1.1.4 | INTEGER (-60..200) | RO | |
column · INTEGER (-60..200) · read-only · current Sensor temperature, deg.C | ||||
| CnpRelHumTempStatus | 1.3.6.1.4.1.25728.8400.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Status of Relative Humiduty
| ||||
| CnpRelHumMemo | 1.3.6.1.4.1.25728.8400.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Sensor Memo/Location | ||||
| CnpRelHumSafeRangeHigh | 1.3.6.1.4.1.25728.8400.1.1.7 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current Relative Humidity safe range, top margin, %RH | ||||
| CnpRelHumSafeRangeLow | 1.3.6.1.4.1.25728.8400.1.1.8 | INTEGER (0..100) | RO | |
column · INTEGER (0..100) · read-only · current Relative Humidity safe range, bottom margin, %RH | ||||
| CnpRelHumTempSafeRangeHigh | 1.3.6.1.4.1.25728.8400.1.1.9 | INTEGER (-55..150) | RO | |
column · INTEGER (-55..150) · read-only · current Temperature safe range, top margin, deg.C | ||||
| CnpRelHumTempSafeRangeLow | 1.3.6.1.4.1.25728.8400.1.1.10 | INTEGER (-55..150) | RO | |
column · INTEGER (-55..150) · read-only · current Temperature safe range, bottom margin, deg.C | ||||
| NnpRelHumTrapData | 1.3.6.1.4.1.25728.8400.3 | |||
| SnpRelHumTrapDataN | 1.3.6.1.4.1.25728.8400.3.1 | INTEGER (1..4) | RO | |
scalar · INTEGER (1..4) · read-only · current Index of Humidity+Temperature sensor, 1 to max supported | ||||
| SnpRelHumTrapDataValue | 1.3.6.1.4.1.25728.8400.3.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Sensor humidity, %RH, or temperature, deg.C | ||||
| SnpRelHumTrapDataStatus | 1.3.6.1.4.1.25728.8400.3.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of humidity or temperature
| ||||
| SnpRelHumTrapDataMemo | 1.3.6.1.4.1.25728.8400.3.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current Sensor Memo/Location | ||||
| SnpRelHumTrapDataSafeRangeHigh | 1.3.6.1.4.1.25728.8400.3.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Relative Humidity safe range, top margin, %RH or deg.C | ||||
| SnpRelHumTrapDataSafeRangeLow | 1.3.6.1.4.1.25728.8400.3.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Relative Humidity safe range, bottom margin, %RH or deg.C | ||||
| NnpRelHumTrap | 1.3.6.1.4.1.25728.8400.6 | |||
| !npRelHumTrapFail | 1.3.6.1.4.1.25728.8400.6.100 | |||
notification · current Rel.Humidity sensor failed! | ||||
| !npRelHumTrapBelowSafe | 1.3.6.1.4.1.25728.8400.6.101 | |||
notification · current Humidity below the Safe range | ||||
| !npRelHumTrapSafe | 1.3.6.1.4.1.25728.8400.6.102 | |||
notification · current Humidity in the Safe range | ||||
| !npRelHumTrapAboveSafe | 1.3.6.1.4.1.25728.8400.6.103 | |||
notification · current Humidity above the Safe range | ||||
| NnpRelHumTrapAllEvents | 1.3.6.1.4.1.25728.8400.6.127 | |||
| !npRelHumTrapAllChannels | 1.3.6.1.4.1.25728.8400.6.127.99 | |||
notification · current Status of Humidity has changed! | ||||
| NnpRelHumTrapTemp | 1.3.6.1.4.1.25728.8400.7 | |||
| !npRelHumTrapTempFail | 1.3.6.1.4.1.25728.8400.7.100 | |||
notification · current Sensor failed! | ||||
| !npRelHumTrapTempBelowSafe | 1.3.6.1.4.1.25728.8400.7.101 | |||
notification · current Temperature below the Safe range | ||||
| !npRelHumTrapTempSafe | 1.3.6.1.4.1.25728.8400.7.102 | |||
notification · current Temperature in the Safe range | ||||
| !npRelHumTrapTempAboveSafe | 1.3.6.1.4.1.25728.8400.7.103 | |||
notification · current Temperature above the Safe range | ||||
| NnpRelHumTrapTempAllEvents | 1.3.6.1.4.1.25728.8400.7.127 | |||
| !npRelHumTrapTempAllChannels | 1.3.6.1.4.1.25728.8400.7.127.99 | |||
notification · current Status of Temperature has changed! | ||||
| NnpThermo | 1.3.6.1.4.1.25728.8800 | |||
| TnpThermoTable | 1.3.6.1.4.1.25728.8800.1 | NA | ||
table · not-accessible · current Thermo Sensors Table | ||||
| RnpThermoEntry | 1.3.6.1.4.1.25728.8800.1.1 | NA | ||
| CnpThermoSensorN | 1.3.6.1.4.1.25728.8800.1.1.1 | INTEGER (1..8) | RO | |
column · INTEGER (1..8) · read-only · current The id of temperature sensor, 1 to 8 | ||||
| CnpThermoValue | 1.3.6.1.4.1.25728.8800.1.1.2 | INTEGER (-60..280) | RO | |
column · INTEGER (-60..280) · read-only · current Temperature, deg.C | ||||
| CnpThermoStatus | 1.3.6.1.4.1.25728.8800.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
| ||||
| CnpThermoLow | 1.3.6.1.4.1.25728.8800.1.1.4 | INTEGER (-60..280) | RO | |
column · INTEGER (-60..280) · read-only · current Bottom margin of normal temperature range, deg.C | ||||
| CnpThermoHigh | 1.3.6.1.4.1.25728.8800.1.1.5 | INTEGER (-60..280) | RO | |
column · INTEGER (-60..280) · read-only · current Top margin of normal temperature range, deg.C | ||||
| CnpThermoMemo | 1.3.6.1.4.1.25728.8800.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current T channel memo | ||||
| CnpThermoValuePrecise | 1.3.6.1.4.1.25728.8800.1.1.7 | FixedPoint1000 | RO | |
column · FixedPoint1000 · read-only · current Temperature, deg.C, with fractional part 3 digits after point | ||||
| NnpThermoTraps | 1.3.6.1.4.1.25728.8800.2 | |||
| NnpThermoTrapPrefix | 1.3.6.1.4.1.25728.8800.2.0 | |||
| !npThermoTrap | 1.3.6.1.4.1.25728.8800.2.0.1 | |||
notification · current Status of Thermo sensor is changed (crossing of normal temp. range) | ||||
| SnpThermoTrapSensorN | 1.3.6.1.4.1.25728.8800.2.1 | INTEGER (1..8) | RO | |
scalar · INTEGER (1..8) · read-only · current The id of temperature sensor, 1 to 8 | ||||
| SnpThermoTrapValue | 1.3.6.1.4.1.25728.8800.2.2 | INTEGER (-60..280) | RO | |
scalar · INTEGER (-60..280) · read-only · current Temperature, deg.C | ||||
| SnpThermoTrapStatus | 1.3.6.1.4.1.25728.8800.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
| ||||
| SnpThermoTrapLow | 1.3.6.1.4.1.25728.8800.2.4 | INTEGER (-60..280) | RO | |
scalar · INTEGER (-60..280) · read-only · current Bottom margin of normal temperature range, deg.C | ||||
| SnpThermoTrapHigh | 1.3.6.1.4.1.25728.8800.2.5 | INTEGER (-60..280) | RO | |
scalar · INTEGER (-60..280) · read-only · current Top margin of normal temperature range, deg.C | ||||
| SnpThermoTrapMemo | 1.3.6.1.4.1.25728.8800.2.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current T channel memo | ||||
| NnpIo | 1.3.6.1.4.1.25728.8900 | |||
| TnpIoTable | 1.3.6.1.4.1.25728.8900.1 | NA | ||
table · not-accessible · current Digital Input/output Table | ||||
| RnpIoEntry | 1.3.6.1.4.1.25728.8900.1.1 | NA | ||
| CnpIoLineN | 1.3.6.1.4.1.25728.8900.1.1.1 | INTEGER (1..8) | RO | |
column · INTEGER (1..8) · read-only · current Number of IO line, from 1 to max supported | ||||
| CnpIoLevelIn | 1.3.6.1.4.1.25728.8900.1.1.2 | INTEGER (0..1) | RO | |
column · INTEGER (0..1) · read-only · current Input level, 0 or 1 | ||||
| CnpIoLevelOut | 1.3.6.1.4.1.25728.8900.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Output level, 0 or 1. Write -1 to flip output.
| ||||
| CnpIoMemo | 1.3.6.1.4.1.25728.8900.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current IO line memo | ||||
| CnpIoPulseCounter | 1.3.6.1.4.1.25728.8900.1.1.9 | Counter32 | RW | |
column · Counter32 · read-write · current Pulse Counter on IO input line (counts positive fronts) Write 0 to reset. | ||||
| CnpIoSinglePulseDuration | 1.3.6.1.4.1.25728.8900.1.1.12 | INTEGER (100..25500) | RW | |
column · INTEGER (100..25500) · read-write · current Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms | ||||
| CnpIoSinglePulseStart | 1.3.6.1.4.1.25728.8900.1.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration | ||||
| NnpIoTraps | 1.3.6.1.4.1.25728.8900.2 | |||
| NnpIoTrapPrefix | 1.3.6.1.4.1.25728.8900.2.0 | |||
| !npIoTrap | 1.3.6.1.4.1.25728.8900.2.0.1 | |||
notification · current Input state of IO line is changed | ||||
| SnpIoTrapLineN | 1.3.6.1.4.1.25728.8900.2.1 | INTEGER (1..2) | RO | |
scalar · INTEGER (1..2) · read-only · current Trap data, Number of IO line | ||||
| SnpIoTrapLevelIn | 1.3.6.1.4.1.25728.8900.2.2 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Trap data, new Input level, 0 or 1 | ||||
| SnpIoTrapMemo | 1.3.6.1.4.1.25728.8900.2.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current Trap data, IO line memo | ||||
| SnpIoTrapLevelLegend | 1.3.6.1.4.1.25728.8900.2.7 | DisplayString | RO | |
scalar · DisplayString · read-only · current Legend for current logic level on the IO line | ||||
Textual conventions
FixedPoint1000INTEGERDisplay hint:
d-3Fixed-point value as Integer, 3 decimal gigits after point (i.e. value*1000 rounded to Integer)
Traps / Notifications
- npCurLoopTrap
1.3.6.1.4.1.25728.8300.2.0.1 - npGsmTrap
1.3.6.1.4.1.25728.3800.2.0.1 - npIoTrap
1.3.6.1.4.1.25728.8900.2.0.1 - npRelHumTrapAboveSafe
1.3.6.1.4.1.25728.8400.6.103 - npRelHumTrapAllChannels
1.3.6.1.4.1.25728.8400.6.127.99 - npRelHumTrapBelowSafe
1.3.6.1.4.1.25728.8400.6.101 - npRelHumTrapFail
1.3.6.1.4.1.25728.8400.6.100 - npRelHumTrapSafe
1.3.6.1.4.1.25728.8400.6.102 - npRelHumTrapTempAboveSafe
1.3.6.1.4.1.25728.8400.7.103 - npRelHumTrapTempAllChannels
1.3.6.1.4.1.25728.8400.7.127.99 - npRelHumTrapTempBelowSafe
1.3.6.1.4.1.25728.8400.7.101 - npRelHumTrapTempFail
1.3.6.1.4.1.25728.8400.7.100 - npRelHumTrapTempSafe
1.3.6.1.4.1.25728.8400.7.102 - npSmokeTrap
1.3.6.1.4.1.25728.8200.2.0.1 - npThermoTrap
1.3.6.1.4.1.25728.8800.2.0.1