NETGEAR-SMART-SWITCHING-MIB
NetgearThe Netgear Private MIB for Switching
snmptranslate -m NETGEAR-SMART-SWITCHING-MIB -Tpsnmpwalk -v2c -c <community> -m NETGEAR-SMART-SWITCHING-MIB <host> 1.3.6.1.4.1.4526.11.1Imports
| IANAifType-MIB | IANAifType |
|---|---|
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| NETGEAR-REF-MIB | ng700smartswitch |
| Q-BRIDGE-MIB | VlanIndex, dot1qFdbId, dot1qTpFdbAddress, dot1qVlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IagentSwitching | 1.3.6.1.4.1.4526.11.1 | |||
identity The Netgear Private MIB for Switching | ||||
| NagentSwitchingTraps | 1.3.6.1.4.1.4526.11.1.0 | |||
| !multipleUsersTrap | 1.3.6.1.4.1.4526.11.1.0.1 | |||
notification · current This trap is sent when more than one user is logged in with administrative access. Only applies to CLI interface. | ||||
| !broadcastStormStartTrap | 1.3.6.1.4.1.4526.11.1.0.2 | obsolete | ||
notification · obsolete This trap is sent when a broadcast storm is detected. | ||||
| !broadcastStormEndTrap | 1.3.6.1.4.1.4526.11.1.0.3 | obsolete | ||
notification · obsolete This trap is sent when a broadcast storm is no longer detected. | ||||
| !linkFailureTrap | 1.3.6.1.4.1.4526.11.1.0.4 | obsolete | ||
| !vlanRequestFailureTrap | 1.3.6.1.4.1.4526.11.1.0.5 | obsolete | ||
notification · obsolete
| ||||
| !vlanDeleteLastTrap | 1.3.6.1.4.1.4526.11.1.0.6 | |||
notification · current Trap is sent when attempting to delete the last configured VLAN or the Default VLAN.
| ||||
| !vlanDefaultCfgFailureTrap | 1.3.6.1.4.1.4526.11.1.0.7 | |||
notification · current Trap is sent if there are failures in resetting VLAN configuration to defaults.
| ||||
| !vlanRestoreFailureTrap | 1.3.6.1.4.1.4526.11.1.0.8 | obsolete | ||
notification · obsolete
| ||||
| !fanFailureTrap | 1.3.6.1.4.1.4526.11.1.0.9 | obsolete | ||
| !stpInstanceNewRootTrap | 1.3.6.1.4.1.4526.11.1.0.10 | |||
notification · current Trap is sent when this machine is a new STP Root when there is more than one STP instance.
| ||||
| !stpInstanceTopologyChangeTrap | 1.3.6.1.4.1.4526.11.1.0.11 | |||
notification · current Trap is sent when there is a STP topology change when there is more than one STP instance.
| ||||
| !powerSupplyStatusChangeTrap | 1.3.6.1.4.1.4526.11.1.0.12 | obsolete | ||
| !failedUserLoginTrap | 1.3.6.1.4.1.4526.11.1.0.13 | |||
notification · current Trap is sent when a user fails to authenticate via the CLI or Web interfaces. | ||||
| !userLockoutTrap | 1.3.6.1.4.1.4526.11.1.0.14 | |||
notification · current Trap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web interfaces beyond the allowed limit. | ||||
| !macAddrLearnTrap | 1.3.6.1.4.1.4526.11.1.0.15 | |||
notification · current Trap is sent when L2 MAC address is learned i.e when entry is added to FDB.
| ||||
| !macAddrAgeoutTrap | 1.3.6.1.4.1.4526.11.1.0.16 | |||
notification · current Trap is sent when L2 MAC address is agedout i.e when entry is removed from FDB.
| ||||
| NagentInfoGroup | 1.3.6.1.4.1.4526.11.1.1 | |||
| NagentInventoryGroup | 1.3.6.1.4.1.4526.11.1.1.1 | |||
| SagentInventorySysDescription | 1.3.6.1.4.1.4526.11.1.1.1.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The switch's Inventory system description. | ||||
| SagentInventoryMachineType | 1.3.6.1.4.1.4526.11.1.1.1.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current Type of the Machine used in the Switch | ||||
| SagentInventoryMachineModel | 1.3.6.1.4.1.4526.11.1.1.1.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The switch's Machine Model. | ||||
| SagentInventorySerialNumber | 1.3.6.1.4.1.4526.11.1.1.1.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current Serial number of the switch. | ||||
| SagentInventoryFRUNumber | 1.3.6.1.4.1.4526.11.1.1.1.5 | DisplayString | RO | |
scalar · DisplayString · read-only · current FRU Number of the switch | ||||
| SagentInventoryMaintenanceLevel | 1.3.6.1.4.1.4526.11.1.1.1.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current The switch's Inventory Maintenance Level | ||||
| SagentInventoryPartNumber | 1.3.6.1.4.1.4526.11.1.1.1.7 | DisplayString | RO | |
scalar · DisplayString · read-only · current The switch's Inventory Part Number | ||||
| SagentInventoryManufacturer | 1.3.6.1.4.1.4526.11.1.1.1.8 | DisplayString | RO | |
scalar · DisplayString · read-only · current Name of the Manufacturer of this unit | ||||
| SagentInventoryBurnedInMacAddress | 1.3.6.1.4.1.4526.11.1.1.1.9 | PhysAddress | RO | |
scalar · PhysAddress · read-only · current Burned-In MAC Address | ||||
| SagentInventoryOperatingSystem | 1.3.6.1.4.1.4526.11.1.1.1.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current Operating System running on this unit | ||||
| SagentInventoryNetworkProcessingDevice | 1.3.6.1.4.1.4526.11.1.1.1.11 | DisplayString | RO | |
scalar · DisplayString · read-only · current Network Processing Device for this unit | ||||
| SagentInventoryAdditionalPackages | 1.3.6.1.4.1.4526.11.1.1.1.12 | DisplayString | RO | |
scalar · DisplayString · read-only · current Lists additional functional packages available on this unit. | ||||
| SagentInventorySoftwareVersion | 1.3.6.1.4.1.4526.11.1.1.1.13 | DisplayString | RO | |
scalar · DisplayString · read-only · current Lists the version of software loaded on this unit. | ||||
| NagentTrapLogGroup | 1.3.6.1.4.1.4526.11.1.1.2 | |||
| SagentTrapLogTotal | 1.3.6.1.4.1.4526.11.1.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of traps sent since last reset. | ||||
| SagentTrapLogTotalSinceLastViewed | 1.3.6.1.4.1.4526.11.1.1.2.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of traps sent since last viewed. | ||||
| TagentTrapLogTable | 1.3.6.1.4.1.4526.11.1.1.2.4 | NA | ||
table · not-accessible · current Agent Trap Log | ||||
| RagentTrapLogEntry | 1.3.6.1.4.1.4526.11.1.1.2.4.1 | NA | ||
| CagentTrapLogIndex | 1.3.6.1.4.1.4526.11.1.1.2.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique index of trap entry | ||||
| CagentTrapLogSystemTime | 1.3.6.1.4.1.4526.11.1.1.2.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred. | ||||
| CagentTrapLogTrap | 1.3.6.1.4.1.4526.11.1.1.2.4.1.3 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current Description of the trap sent. | ||||
| TagentSupportedMibTable | 1.3.6.1.4.1.4526.11.1.1.3 | NA | ||
table · not-accessible · current Supported MIB table | ||||
| RagentSupportedMibEntry | 1.3.6.1.4.1.4526.11.1.1.3.1 | NA | ||
| CagentSupportedMibIndex | 1.3.6.1.4.1.4526.11.1.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique index of the Supported MIB entry | ||||
| CagentSupportedMibName | 1.3.6.1.4.1.4526.11.1.1.3.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the MIB (RFC or IEEE) that is supported. | ||||
| CagentSupportedMibDescription | 1.3.6.1.4.1.4526.11.1.1.3.1.3 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current Description of the MIB (RFC or IEEE) that is supported. | ||||
| NagentConfigGroup | 1.3.6.1.4.1.4526.11.1.2 | |||
| NagentCLIConfigGroup | 1.3.6.1.4.1.4526.11.1.2.1 | |||
| TagentLoginSessionTable | 1.3.6.1.4.1.4526.11.1.2.1.1 | NA | ||
table · not-accessible · current A table of the switch's login session | ||||
| RagentLoginSessionEntry | 1.3.6.1.4.1.4526.11.1.2.1.1.1 | NA | ||
| CagentLoginSessionIndex | 1.3.6.1.4.1.4526.11.1.2.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Agent Login Session Index of the switch | ||||
| CagentLoginSessionUserName | 1.3.6.1.4.1.4526.11.1.2.1.1.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Agent Login Session UserName of the switch | ||||
| CagentLoginSessionIPAddress | 1.3.6.1.4.1.4526.11.1.2.1.1.1.3 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete Agent Login Session IP Address of the switch | ||||
| CagentLoginSessionConnectionType | 1.3.6.1.4.1.4526.11.1.2.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Agent Login Session Connection Type of the switch
| ||||
| CagentLoginSessionIdleTime | 1.3.6.1.4.1.4526.11.1.2.1.1.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current Agent Login Session Idle Time of the switch | ||||
| CagentLoginSessionSessionTime | 1.3.6.1.4.1.4526.11.1.2.1.1.1.6 | TimeTicks | RO | |
column · TimeTicks · read-only · current Agent Login Session Time of the switch | ||||
| CagentLoginSessionStatus | 1.3.6.1.4.1.4526.11.1.2.1.1.1.7 | RowStatus | RW | |
column · RowStatus · read-write · current Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user. | ||||
| CagentLoginSessionInetAddressType | 1.3.6.1.4.1.4526.11.1.2.1.1.1.8 | InetAddressType | RO | |
column · InetAddressType · read-only · current Type of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login. | ||||
| CagentLoginSessionInetAddress | 1.3.6.1.4.1.4526.11.1.2.1.1.1.9 | InetAddress | RO | |
column · InetAddress · read-only · current Inet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login. | ||||
| NagentTelnetConfigGroup | 1.3.6.1.4.1.4526.11.1.2.1.2 | |||
| SagentTelnetLoginTimeout | 1.3.6.1.4.1.4526.11.1.2.1.2.1 | Integer32 (1..160) | RW | |
scalar · Integer32 (1..160) · read-write · current Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 1 to 160. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration. | ||||
| SagentTelnetMaxSessions | 1.3.6.1.4.1.4526.11.1.2.1.2.2 | Integer32 (0..5) | RW | |
scalar · Integer32 (0..5) · read-write · current Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established. | ||||
| SagentTelnetAllowNewMode | 1.3.6.1.4.1.4526.11.1.2.1.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it.
| ||||
| NagentUserConfigGroup | 1.3.6.1.4.1.4526.11.1.2.1.3 | |||
| SagentUserConfigCreate | 1.3.6.1.4.1.4526.11.1.2.1.3.1 | DisplayString (SIZE (1..8)) | RW | |
scalar · DisplayString (SIZE (1..8)) · read-write · current Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters). | ||||
| TagentUserConfigTable | 1.3.6.1.4.1.4526.11.1.2.1.3.2 | NA | ||
table · not-accessible · current User Config Table | ||||
| RagentUserConfigEntry | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1 | NA | ||
| CagentUserIndex | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Agent User Config Index | ||||
| CagentUserName | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.2 | DisplayString (SIZE (1..8)) | RO | |
column · DisplayString (SIZE (1..8)) · read-only · current Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters). | ||||
| CagentUserPassword | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.3 | DisplayString (SIZE (8..64)) | RW | |
column · DisplayString (SIZE (8..64)) · read-write · current Agent User Password This object will return an empty string even if a password is set. | ||||
| CagentUserAccessMode | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Agent User Access Mode
| ||||
| CagentUserAuthenticationType | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
| ||||
| CagentUserEncryptionType | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used
| ||||
| CagentUserEncryptionPassword | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.8 | DisplayString (SIZE (8..64)) | RW | |
column · DisplayString (SIZE (8..64)) · read-write · current SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set. | ||||
| CagentUserLockoutStatus | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Displays whether the user account is locked due to excessive failed login attempts.
| ||||
| CagentUserPasswordExpireTime | 1.3.6.1.4.1.4526.11.1.2.1.3.2.1.10 | DateAndTime | RO | |
column · DateAndTime · read-only · current Date and time when the user's password expires (past or present). Only valid when password aging is enabled. | ||||
| NagentSerialGroup | 1.3.6.1.4.1.4526.11.1.2.1.5 | |||
| SagentSerialTimeout | 1.3.6.1.4.1.4526.11.1.2.1.5.1 | Integer32 (0..160) | RW | |
scalar · Integer32 (0..160) · read-write · current agentSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160. | ||||
| SagentSerialBaudrate | 1.3.6.1.4.1.4526.11.1.2.1.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current agentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud.
| ||||
| SagentSerialCharacterSize | 1.3.6.1.4.1.4526.11.1.2.1.5.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current agentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8. | ||||
| SagentSerialHWFlowControlMode | 1.3.6.1.4.1.4526.11.1.2.1.5.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
| ||||
| SagentSerialStopBits | 1.3.6.1.4.1.4526.11.1.2.1.5.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current agentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1. | ||||
| SagentSerialParityType | 1.3.6.1.4.1.4526.11.1.2.1.5.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None.
| ||||
| NagentPasswordManagementConfigGroup | 1.3.6.1.4.1.4526.11.1.2.1.6 | |||
| SagentPasswordManagementMinLength | 1.3.6.1.4.1.4526.11.1.2.1.6.1 | Integer32 (1..20) | RW | |
scalar · Integer32 (1..20) · read-write · current Minimum length for user passwords All new local user passwords must be at least this many characters in length. | ||||
| SagentPasswordManagementHistory | 1.3.6.1.4.1.4526.11.1.2.1.6.2 | Integer32 (0..10) | RW | |
scalar · Integer32 (0..10) · read-write · current The number of previous passwords to store for prevention of password reuse. This ensures that each user does not reuse passwords often. A value of 0 indicates that no previous passwords will be stored. | ||||
| SagentPasswordManagementAging | 1.3.6.1.4.1.4526.11.1.2.1.6.3 | Integer32 (1..365) | RW | |
scalar · Integer32 (1..365) · read-write · current The maximum time that user passwords are valid, in days, from the time the password is set. Once a password expires, the user will be required to enter a new password following the first login after password expiration. A value of 0 indicates that passwords never expire. | ||||
| SagentPasswordManagementLockAttempts | 1.3.6.1.4.1.4526.11.1.2.1.6.4 | Integer32 (1..5) | RW | |
scalar · Integer32 (1..5) · read-write · current The number of allowable failed local authentication attempts before the user's account is locked. A value of 0 indicates that user accounts will never be locked. | ||||
| NagentLagConfigGroup | 1.3.6.1.4.1.4526.11.1.2.2 | |||
| SagentLagConfigCreate | 1.3.6.1.4.1.4526.11.1.2.2.1 | DisplayString (SIZE (0 | 1..15)) | RW | |
scalar · DisplayString (SIZE (0 | 1..15)) · read-write · current Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible with the entered string as its name. | ||||
| TagentLagSummaryConfigTable | 1.3.6.1.4.1.4526.11.1.2.2.2 | NA | ||
table · not-accessible · current A summary table of the switch's LAG config entries | ||||
| RagentLagSummaryConfigEntry | 1.3.6.1.4.1.4526.11.1.2.2.2.1 | NA | ||
| CagentLagSummaryLagIndex | 1.3.6.1.4.1.4526.11.1.2.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable. | ||||
| CagentLagSummaryName | 1.3.6.1.4.1.4526.11.1.2.2.2.1.2 | DisplayString (SIZE (1..15)) | RW | |
column · DisplayString (SIZE (1..15)) · read-write · current Agent LAG Name. The associated name of the LAG used during creation. | ||||
| CagentLagSummaryFlushTimer | 1.3.6.1.4.1.4526.11.1.2.2.2.1.3 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Agent LAG FlushTimer. | ||||
| CagentLagSummaryLinkTrap | 1.3.6.1.4.1.4526.11.1.2.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
| ||||
| CagentLagSummaryAdminMode | 1.3.6.1.4.1.4526.11.1.2.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Agent LAG AdminMode. Administratively enables or disables this LAG interface.
| ||||
| CagentLagSummaryStpMode | 1.3.6.1.4.1.4526.11.1.2.2.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Agent LAG StpMode If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3) If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
| ||||
| CagentLagSummaryAddPort | 1.3.6.1.4.1.4526.11.1.2.2.2.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any. | ||||
| CagentLagSummaryDeletePort | 1.3.6.1.4.1.4526.11.1.2.2.2.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable. | ||||
| CagentLagSummaryStatus | 1.3.6.1.4.1.4526.11.1.2.2.2.1.9 | RowStatus | RW | |
column · RowStatus · read-write · current Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG. | ||||
| CagentLagSummaryType | 1.3.6.1.4.1.4526.11.1.2.2.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
| ||||
| CagentLagSummaryStaticCapability | 1.3.6.1.4.1.4526.11.1.2.2.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface
| ||||
| TagentLagDetailedConfigTable | 1.3.6.1.4.1.4526.11.1.2.2.3 | NA | ||
table · not-accessible · current A detailed table of the switch's LAG config entries | ||||
| RagentLagDetailedConfigEntry | 1.3.6.1.4.1.4526.11.1.2.2.3.1 | NA | ||
row · not-accessible · current Switch's LAG config entry | ||||
| CagentLagDetailedLagIndex | 1.3.6.1.4.1.4526.11.1.2.2.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current LAG index | ||||
| CagentLagDetailedIfIndex | 1.3.6.1.4.1.4526.11.1.2.2.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current LAG port index | ||||
| CagentLagDetailedPortSpeed | 1.3.6.1.4.1.4526.11.1.2.2.3.1.3 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current LAG port speed. See agentPortType for a description and list of valid values. | ||||
| CagentLagDetailedPortStatus | 1.3.6.1.4.1.4526.11.1.2.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
| ||||
| SagentLagConfigStaticCapability | 1.3.6.1.4.1.4526.11.1.2.2.4 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
| ||||
| NagentNetworkConfigGroup | 1.3.6.1.4.1.4526.11.1.2.3 | |||
| SagentNetworkIPAddress | 1.3.6.1.4.1.4526.11.1.2.3.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The switch's network ip address | ||||
| SagentNetworkSubnetMask | 1.3.6.1.4.1.4526.11.1.2.3.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The switch's network subnet mask | ||||
| SagentNetworkDefaultGateway | 1.3.6.1.4.1.4526.11.1.2.3.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The switch's network default gateway | ||||
| SagentNetworkBurnedInMacAddress | 1.3.6.1.4.1.4526.11.1.2.3.4 | PhysAddress | RO | |
scalar · PhysAddress · read-only · current The switch's network Burned-In MAC address | ||||
| SagentNetworkLocalAdminMacAddress | 1.3.6.1.4.1.4526.11.1.2.3.5 | PhysAddress | RW | |
scalar · PhysAddress · read-write · current The switch's network locally administered MAC address | ||||
| SagentNetworkMacAddressType | 1.3.6.1.4.1.4526.11.1.2.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch's network Mac Address Type
| ||||
| SagentNetworkConfigProtocol | 1.3.6.1.4.1.4526.11.1.2.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch's network config protocol
| ||||
| SagentNetworkWebMode | 1.3.6.1.4.1.4526.11.1.2.3.8 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete The switch's network config protocol on next bootup
| ||||
| SagentNetworkJavaMode | 1.3.6.1.4.1.4526.11.1.2.3.9 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Configures the use of the Java interface through the Web.
| ||||
| SagentNetworkMgmtVlan | 1.3.6.1.4.1.4526.11.1.2.3.10 | Integer32 (1..4094) | RW | |
scalar · Integer32 (1..4094) · read-write · current The VLAN ID through which the switch can be managed using the agentNetworkIPAddress | ||||
| SagentNetworkIpv6AdminMode | 1.3.6.1.4.1.4526.11.1.2.3.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current The network port IPv6 administrative state
| ||||
| SagentNetworkIpv6Gateway | 1.3.6.1.4.1.4526.11.1.2.3.12 | Ipv6AddressPrefix | RW | |
scalar · Ipv6AddressPrefix · read-write · current The network port IPv6 Gateway Address | ||||
| TagentNetworkIpv6AddrTable | 1.3.6.1.4.1.4526.11.1.2.3.13 | NA | ||
table · not-accessible · current The list of IPv6 address prefixes for the network port. | ||||
| RagentNetworkIpv6AddrEntry | 1.3.6.1.4.1.4526.11.1.2.3.13.1 | NA | ||
row · not-accessible · current An interface entry containing objects of a particular IPv6 address prefix | ||||
| CagentNetworkIpv6AddrPrefix | 1.3.6.1.4.1.4526.11.1.2.3.13.1.1 | Ipv6AddressPrefix | NA | |
column · Ipv6AddressPrefix · not-accessible · current The service port IPv6 Address Prefix | ||||
| CagentNetworkIpv6AddrPrefixLength | 1.3.6.1.4.1.4526.11.1.2.3.13.1.2 | INTEGER (0..128) | RC | |
column · INTEGER (0..128) · read-create · current The service port IPv6 Address Prefix Length | ||||
| CagentNetworkIpv6AddrEuiFlag | 1.3.6.1.4.1.4526.11.1.2.3.13.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The service port IPv6 Eui Flag
| ||||
| CagentNetworkIpv6AddrStatus | 1.3.6.1.4.1.4526.11.1.2.3.13.1.4 | RowStatus | RC | |
| NagentServicePortConfigGroup | 1.3.6.1.4.1.4526.11.1.2.4 | |||
| SagentServicePortIPAddress | 1.3.6.1.4.1.4526.11.1.2.4.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The switch's ServicePort ip address | ||||
| SagentServicePortSubnetMask | 1.3.6.1.4.1.4526.11.1.2.4.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The switch's ServicePort subnet mask | ||||
| SagentServicePortDefaultGateway | 1.3.6.1.4.1.4526.11.1.2.4.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The switch's ServicePort default gateway | ||||
| SagentServicePortBurnedInMacAddress | 1.3.6.1.4.1.4526.11.1.2.4.4 | PhysAddress | RO | |
scalar · PhysAddress · read-only · current The switch's ServicePort Burned-In MAC address | ||||
| SagentServicePortConfigProtocol | 1.3.6.1.4.1.4526.11.1.2.4.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch's ServicePort config protocol
| ||||
| SagentServicePortIpv6AdminMode | 1.3.6.1.4.1.4526.11.1.2.4.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The service port IPv6 administrative state
| ||||
| SagentServicePortIpv6Gateway | 1.3.6.1.4.1.4526.11.1.2.4.7 | Ipv6AddressPrefix | RW | |
scalar · Ipv6AddressPrefix · read-write · current The service port IPv6 Gateway Address | ||||
| TagentServicePortIpv6AddrTable | 1.3.6.1.4.1.4526.11.1.2.4.8 | NA | ||
table · not-accessible · current The list of IPv6 address prefixes for the service port. | ||||
| RagentServicePortIpv6AddrEntry | 1.3.6.1.4.1.4526.11.1.2.4.8.1 | NA | ||
row · not-accessible · current An interface entry containing objects of a particular IPv6 address prefix | ||||
| CagentServicePortIpv6AddrPrefix | 1.3.6.1.4.1.4526.11.1.2.4.8.1.1 | Ipv6AddressPrefix | NA | |
column · Ipv6AddressPrefix · not-accessible · current The service port IPv6 Address Prefix | ||||
| CagentServicePortIpv6AddrPrefixLength | 1.3.6.1.4.1.4526.11.1.2.4.8.1.2 | INTEGER (0..128) | RC | |
column · INTEGER (0..128) · read-create · current The service port IPv6 Address Prefix Length | ||||
| CagentServicePortIpv6AddrEuiFlag | 1.3.6.1.4.1.4526.11.1.2.4.8.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The service port IPv6 Eui Flag
| ||||
| CagentServicePortIpv6AddrStatus | 1.3.6.1.4.1.4526.11.1.2.4.8.1.4 | RowStatus | RC | |
| NagentSnmpConfigGroup | 1.3.6.1.4.1.4526.11.1.2.6 | |||
| SagentSnmpCommunityCreate | 1.3.6.1.4.1.4526.11.1.2.6.1 | DisplayString (SIZE (1..16)) | RW | |
scalar · DisplayString (SIZE (1..16)) · read-write · current Creates a new SNMP Community entry.
Defaults: IPAddress 0.0.0.0
IpMask 0.0.0.0
AccessMode read-only
Status config | ||||
| TagentSnmpCommunityConfigTable | 1.3.6.1.4.1.4526.11.1.2.6.2 | NA | ||
table · not-accessible · current A table of the switch's SNMP Config entries | ||||
| RagentSnmpCommunityConfigEntry | 1.3.6.1.4.1.4526.11.1.2.6.2.1 | NA | ||
| CagentSnmpCommunityIndex | 1.3.6.1.4.1.4526.11.1.2.6.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The switch's Snmp Community Index | ||||
| CagentSnmpCommunityName | 1.3.6.1.4.1.4526.11.1.2.6.2.1.2 | DisplayString (SIZE (1..16)) | RW | |
column · DisplayString (SIZE (1..16)) · read-write · current The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored. | ||||
| CagentSnmpCommunityIPAddress | 1.3.6.1.4.1.4526.11.1.2.6.2.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses. | ||||
| CagentSnmpCommunityIPMask | 1.3.6.1.4.1.4526.11.1.2.6.2.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255. | ||||
| CagentSnmpCommunityAccessMode | 1.3.6.1.4.1.4526.11.1.2.6.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration changes to be made and for information to be displayed.
| ||||
| CagentSnmpCommunityStatus | 1.3.6.1.4.1.4526.11.1.2.6.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The switch's Snmp Community Status.
active(1) - This community is active, allowing SNMP managers associated
with this community to manage the switch according to its
access right.
notInService(2) - This community is not active; no SNMP requests using this
community will be accepted. In this case the SNMP manager
associated with this community cannot manage the switch until
the Status is changed back to active(1).
config(3) - The community Status must be set to this value in order to
configure it. When creating a new community entry, initial
Status will be set to this value.
destroy(4) - Set to this value to remove the community from the agent.
| ||||
| SagentSnmpTrapReceiverCreate | 1.3.6.1.4.1.4526.11.1.2.6.3 | DisplayString (SIZE (1..16)) | RW | |
scalar · DisplayString (SIZE (1..16)) · read-write · current Creates a new trap receiver entry.
Defaults: IPAddress 0.0.0.0
status config | ||||
| TagentSnmpTrapReceiverConfigTable | 1.3.6.1.4.1.4526.11.1.2.6.4 | NA | ||
table · not-accessible · current Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported. | ||||
| RagentSnmpTrapReceiverConfigEntry | 1.3.6.1.4.1.4526.11.1.2.6.4.1 | NA | ||
row · not-accessible · current Switch's Snmp Trace Receiver Config entry | ||||
| CagentSnmpTrapReceiverIndex | 1.3.6.1.4.1.4526.11.1.2.6.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The switch's Snmp Trap Receiver Index | ||||
| CagentSnmpTrapReceiverCommunityName | 1.3.6.1.4.1.4526.11.1.2.6.4.1.2 | DisplayString (SIZE (1..16)) | RW | |
column · DisplayString (SIZE (1..16)) · read-write · current The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive. | ||||
| CagentSnmpTrapReceiverIPAddress | 1.3.6.1.4.1.4526.11.1.2.6.4.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255. | ||||
| CagentSnmpTrapReceiverStatus | 1.3.6.1.4.1.4526.11.1.2.6.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The switch's Snmp Trap Reciever Status.
active(1) - This trap receiver is active, allowing SNMP Traps to
be sent to this receiver.
notInService(2) - This trap reciever is not active; no SNMP Traps will
be sent to this reciever until it's set back to active(1).
config(3) - The trap reciever Status must be set to this value in order
to configure it. When creating a new trap receiver entry,
the Status will initially be set to this value.
Note: agentSnmpTrapReceiverIPAddress must be set to non-zero
before changing to active(1) or notInService(2).
destroy(4) - Set to this value to remove the trap receiver entry from
the agent.
| ||||
| CagentSnmpTrapReceiverVersion | 1.3.6.1.4.1.4526.11.1.2.6.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The version of trap sent to this Reciever. snmpv1(1) - This will send a SNMPv1 trap. snmpv2c(2) - This will send a SNMPv2c trap.
| ||||
| CagentSnmpTrapReceiverIpv6Address | 1.3.6.1.4.1.4526.11.1.2.6.4.1.6 | Ipv6AddressPrefix | RW | |
column · Ipv6AddressPrefix · read-write · current IPv6 Address for SNMP receiver. | ||||
| NagentSnmpTrapFlagsConfigGroup | 1.3.6.1.4.1.4526.11.1.2.6.5 | |||
| SagentSnmpAuthenticationTrapFlag | 1.3.6.1.4.1.4526.11.1.2.6.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Authentication Flag - Enable/Disable authentication Flag.
| ||||
| SagentSnmpLinkUpDownTrapFlag | 1.3.6.1.4.1.4526.11.1.2.6.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable.
| ||||
| SagentSnmpMultipleUsersTrapFlag | 1.3.6.1.4.1.4526.11.1.2.6.5.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session.
| ||||
| SagentSnmpSpanningTreeTrapFlag | 1.3.6.1.4.1.4526.11.1.2.6.5.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
| ||||
| SagentSnmpBroadcastStormTrapFlag | 1.3.6.1.4.1.4526.11.1.2.6.5.5 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery.
| ||||
| NagentSpanningTreeConfigGroup | 1.3.6.1.4.1.4526.11.1.2.7 | |||
| SagentSpanningTreeMode | 1.3.6.1.4.1.4526.11.1.2.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch's Spanning Tree Switch Status
| ||||
| NagentSwitchConfigGroup | 1.3.6.1.4.1.4526.11.1.2.8 | |||
| TagentSwitchAddressAgingTimeoutTable | 1.3.6.1.4.1.4526.11.1.2.8.4 | NA | ||
table · not-accessible · current The switch's address aging timeout table | ||||
| RagentSwitchAddressAgingTimeoutEntry | 1.3.6.1.4.1.4526.11.1.2.8.4.1 | NA | ||
| CagentSwitchAddressAgingTimeout | 1.3.6.1.4.1.4526.11.1.2.8.4.1.1 | Integer32 (10..1000000) | RW | |
column · Integer32 (10..1000000) · read-write · current The FDB entry's address aging timeout (in seconds) | ||||
| TagentSwitchStaticMacFilteringTable | 1.3.6.1.4.1.4526.11.1.2.8.5 | NA | ||
table · not-accessible · current The switch's static Mac filtering table | ||||
| RagentSwitchStaticMacFilteringEntry | 1.3.6.1.4.1.4526.11.1.2.8.5.1 | NA | ||
row · not-accessible · current Per-port ingress/egress filter configuration based on VLAN Id and MAC address. | ||||
| CagentSwitchStaticMacFilteringVlanId | 1.3.6.1.4.1.4526.11.1.2.8.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The Static MAC Filter Vlan Id | ||||
| CagentSwitchStaticMacFilteringAddress | 1.3.6.1.4.1.4526.11.1.2.8.5.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current The Static MAC Filter MAC address | ||||
| CagentSwitchStaticMacFilteringSourcePortMask | 1.3.6.1.4.1.4526.11.1.2.8.5.1.3 | AgentPortMask | RW | |
column · AgentPortMask · read-write · current The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | ||||
| CagentSwitchStaticMacFilteringDestPortMask | 1.3.6.1.4.1.4526.11.1.2.8.5.1.4 | AgentPortMask | RW | |
column · AgentPortMask · read-write · current The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. Configuring destination port mask for a unicast MAC filter is not supported on some platforms. | ||||
| CagentSwitchStaticMacFilteringStatus | 1.3.6.1.4.1.4526.11.1.2.8.5.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry | ||||
| NagentSwitchSnoopingGroup | 1.3.6.1.4.1.4526.11.1.2.8.6 | |||
| TagentSwitchSnoopingCfgTable | 1.3.6.1.4.1.4526.11.1.2.8.6.1 | NA | ||
table · not-accessible · current A table of the IGMP/MLD Snooping Global configuration entries. | ||||
| RagentSwitchSnoopingCfgEntry | 1.3.6.1.4.1.4526.11.1.2.8.6.1.1 | NA | ||
row · not-accessible · current Represents entry for Snooping switch Configuration. | ||||
| CagentSwitchSnoopingProtocol | 1.3.6.1.4.1.4526.11.1.2.8.6.1.1.1 | InetAddressType | RO | |
column · InetAddressType · read-only · current The protocol type of network protocol in use. | ||||
| CagentSwitchSnoopingAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.6.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables Snooping on the system.
| ||||
| CagentSwitchSnoopingPortMask | 1.3.6.1.4.1.4526.11.1.2.8.6.1.1.3 | AgentPortMask | RW | |
column · AgentPortMask · read-write · current IGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping enabled becomes enabled for routing, or is enlisted as a member of a LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | ||||
| CagentSwitchSnoopingMulticastControlFramesProcessed | 1.3.6.1.4.1.4526.11.1.2.8.6.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU. | ||||
| NagentSwitchSnoopingIntfGroup | 1.3.6.1.4.1.4526.11.1.2.8.7 | |||
| TagentSwitchSnoopingIntfTable | 1.3.6.1.4.1.4526.11.1.2.8.7.1 | NA | ||
table · not-accessible · current A table of the IGMP Snooping Interface configuration entries. | ||||
| RagentSwitchSnoopingIntfEntry | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1 | NA | ||
row · not-accessible · current Represents entry for a IGMP Snooping Interface. | ||||
| CagentSwitchSnoopingIntfIndex | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.1 | Unsigned32 (1..65535) | RO | |
column · Unsigned32 (1..65535) · read-only · current The port number to be selected. Each port maps to an interface. | ||||
| CagentSwitchSnoopingIntfAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables IGMP Snooping on a selected interface.
| ||||
| CagentSwitchSnoopingIntfGroupMembershipInterval | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3 | Integer32 (2..3600) | RW | |
column · Integer32 (2..3600) · read-write · current The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime. | ||||
| CagentSwitchSnoopingIntfMaxResponseTime | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.4 | Integer32 (1..3599) | RW | |
column · Integer32 (1..3599) · read-write · current The amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval. | ||||
| CagentSwitchSnoopingIntfMRPExpirationTime | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.5 | Integer32 (0..3600) | RW | |
column · Integer32 (0..3600) · read-write · current The amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached. | ||||
| CagentSwitchSnoopingIntfFastLeaveAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables IGMP Snooping on the selected interface.
| ||||
| CagentSwitchSnoopingIntfMulticastRouterMode | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables Multicast Routing on the selected interface.
| ||||
| CagentSwitchSnoopingIntfVlanIDs | 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.8 | VlanList | RO | |
column · VlanList · read-only · current This field lists all the VlanIDs which include the selected interface. | ||||
| NagentSwitchSnoopingVlanGroup | 1.3.6.1.4.1.4526.11.1.2.8.8 | |||
| TagentSwitchSnoopingVlanTable | 1.3.6.1.4.1.4526.11.1.2.8.8.1 | NA | ||
table · not-accessible · current A table of the IGMP Snooping Vlan configuration entries. | ||||
| RagentSwitchSnoopingVlanEntry | 1.3.6.1.4.1.4526.11.1.2.8.8.1.1 | NA | ||
row · not-accessible · current Represents entry for a IGMP Snooping Vlan. | ||||
| CagentSwitchSnoopingVlanAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.8.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables IGMP Snooping on a selected Vlan interface.
| ||||
| CagentSwitchSnoopingVlanGroupMembershipInterval | 1.3.6.1.4.1.4526.11.1.2.8.8.1.1.2 | Integer32 (2..3600) | RW | |
column · Integer32 (2..3600) · read-write · current The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime. | ||||
| CagentSwitchSnoopingVlanMaxResponseTime | 1.3.6.1.4.1.4526.11.1.2.8.8.1.1.3 | Integer32 (1..3599) | RW | |
column · Integer32 (1..3599) · read-write · current The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval. | ||||
| CagentSwitchSnoopingVlanFastLeaveAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables IGMP Snooping on the selected vlan.
| ||||
| CagentSwitchSnoopingVlanMRPExpirationTime | 1.3.6.1.4.1.4526.11.1.2.8.8.1.1.5 | Integer32 (0..3600) | RW | |
column · Integer32 (0..3600) · read-write · current The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers attached. This parameter is configurable only for exisiting Vlans. | ||||
| NagentSwitchVlanStaticMrouterGroup | 1.3.6.1.4.1.4526.11.1.2.8.9 | |||
| TagentSwitchVlanStaticMrouterTable | 1.3.6.1.4.1.4526.11.1.2.8.9.1 | NA | ||
table · not-accessible · current A table of the IGMP Static Mrouter Configuration parameters. | ||||
| RagentSwitchVlanStaticMrouterEntry | 1.3.6.1.4.1.4526.11.1.2.8.9.1.1 | NA | ||
row · not-accessible · current Represents entry for a IGMP Static Mrouter. | ||||
| CagentSwitchVlanStaticMrouterAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.9.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables IGMP Mrouter on a per-interface per-vlan basis.
| ||||
| NagentSwitchMFDBGroup | 1.3.6.1.4.1.4526.11.1.2.8.10 | |||
| TagentSwitchMFDBTable | 1.3.6.1.4.1.4526.11.1.2.8.10.1 | NA | ||
table · not-accessible · current The Multicast Forwarding Database table | ||||
| RagentSwitchMFDBEntry | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1 | NA | ||
row · not-accessible · current Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User. | ||||
| CagentSwitchMFDBVlanId | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current Vlan Index for which this entry is associated with. | ||||
| CagentSwitchMFDBMacAddress | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current A multicast MAC address for which the switch has forwarding and or filtering information. | ||||
| CagentSwitchMFDBProtocolType | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The component that is responsible for this entry in the Multicast Forwarding Database.
| ||||
| CagentSwitchMFDBType | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
| ||||
| CagentSwitchMFDBDescription | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Text description of this multicast table entry. | ||||
| CagentSwitchMFDBForwardingPortMask | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1.6 | AgentPortMask | RO | |
column · AgentPortMask · read-only · current BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | ||||
| CagentSwitchMFDBFilteringPortMask | 1.3.6.1.4.1.4526.11.1.2.8.10.1.1.7 | AgentPortMask | RO | |
column · AgentPortMask · read-only · current BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | ||||
| TagentSwitchMFDBSummaryTable | 1.3.6.1.4.1.4526.11.1.2.8.10.2 | NA | ||
table · not-accessible · current The Multicast Forwarding Database Summary table | ||||
| RagentSwitchMFDBSummaryEntry | 1.3.6.1.4.1.4526.11.1.2.8.10.2.1 | NA | ||
row · not-accessible · current Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address. | ||||
| CagentSwitchMFDBSummaryVlanId | 1.3.6.1.4.1.4526.11.1.2.8.10.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current Vlan Index for which this entry is associated with. | ||||
| CagentSwitchMFDBSummaryMacAddress | 1.3.6.1.4.1.4526.11.1.2.8.10.2.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current A multicast MAC address for which the switch has forwarding and or filtering information. | ||||
| CagentSwitchMFDBSummaryForwardingPortMask | 1.3.6.1.4.1.4526.11.1.2.8.10.2.1.3 | AgentPortMask | RO | |
column · AgentPortMask · read-only · current Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | ||||
| SagentSwitchMFDBMaxTableEntries | 1.3.6.1.4.1.4526.11.1.2.8.10.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table. | ||||
| SagentSwitchMFDBMostEntriesUsed | 1.3.6.1.4.1.4526.11.1.2.8.10.4 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water mark. | ||||
| SagentSwitchMFDBCurrentEntries | 1.3.6.1.4.1.4526.11.1.2.8.10.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current This displays the current number of entries in the Multicast Forwarding Database table. | ||||
| NagentSwitchStormControlGroup | 1.3.6.1.4.1.4526.11.1.2.8.12 | |||
| SagentSwitchDot3FlowControlMode | 1.3.6.1.4.1.4526.11.1.2.8.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports.
| ||||
| SagentSwitchBroadcastControlMode | 1.3.6.1.4.1.4526.11.1.2.8.12.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
| ||||
| SagentSwitchBroadcastControlThreshold | 1.3.6.1.4.1.4526.11.1.2.8.12.5 | Unsigned32 (0..100) | RW | |
scalar · Unsigned32 (0..100) · read-write · current Configures the broadcast storm recovery threshold for this port as a percentage of port speed. | ||||
| SagentSwitchMulticastControlMode | 1.3.6.1.4.1.4526.11.1.2.8.12.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
| ||||
| SagentSwitchMulticastControlThreshold | 1.3.6.1.4.1.4526.11.1.2.8.12.7 | Unsigned32 (0..100) | RW | |
scalar · Unsigned32 (0..100) · read-write · current Configures the multicast storm recovery threshold for this port as a percentage of port speed. | ||||
| SagentSwitchUnicastControlMode | 1.3.6.1.4.1.4526.11.1.2.8.12.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
| ||||
| SagentSwitchUnicastControlThreshold | 1.3.6.1.4.1.4526.11.1.2.8.12.9 | Unsigned32 (0..100) | RW | |
scalar · Unsigned32 (0..100) · read-write · current Configures the unicast storm recovery threshold for this port as a percentage of port speed. | ||||
| NagentDhcpFilteringGroup | 1.3.6.1.4.1.4526.11.1.2.8.15 | |||
| SagentDhcpFilteringAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.15.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Dhcp Filtering mode: enable - enable dhcp filtering mode disable - disable dhcp filtering mode.
| ||||
| TagentDhcpFilteringPortConfigTable | 1.3.6.1.4.1.4526.11.1.2.8.15.2 | NA | ||
table · not-accessible · current A table that contains the configuration objects for the with each port. | ||||
| RagentDhcpFilteringPortConfigEntry | 1.3.6.1.4.1.4526.11.1.2.8.15.2.1 | NA | ||
| CagentDhcpFilteringPortTrustedMode | 1.3.6.1.4.1.4526.11.1.2.8.15.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Port's DHCP mode. It can be either trusted or untrusted default will be untrusted.
| ||||
| NagentSwitchProtectedPortConfigGroup | 1.3.6.1.4.1.4526.11.1.2.8.18 | |||
| TagentSwitchProtectedPortTable | 1.3.6.1.4.1.4526.11.1.2.8.18.1 | NA | ||
table · not-accessible · current The switch's protected port mapping table | ||||
| RagentSwitchProtectedPortEntry | 1.3.6.1.4.1.4526.11.1.2.8.18.1.1 | NA | ||
row · not-accessible · current Protected ports assigned to groups. | ||||
| CagentSwitchProtectedPortGroupId | 1.3.6.1.4.1.4526.11.1.2.8.18.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The group that this port belongs to | ||||
| CagentSwitchProtectedPortGroupName | 1.3.6.1.4.1.4526.11.1.2.8.18.1.1.2 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current The name of the group | ||||
| CagentSwitchProtectedPortPortList | 1.3.6.1.4.1.4526.11.1.2.8.18.1.1.3 | PortList | RW | |
column · PortList · read-write · current The set of ports that are protected in this group | ||||
| NagentSwitchSnoopingQuerierGroup | 1.3.6.1.4.1.4526.11.1.2.8.20 | |||
| TagentSwitchSnoopingQuerierCfgTable | 1.3.6.1.4.1.4526.11.1.2.8.20.1 | NA | ||
table · not-accessible · current A table of the IGMP/MLD Snooping Querier Global configuration entries. | ||||
| RagentSwitchSnoopingQuerierCfgEntry | 1.3.6.1.4.1.4526.11.1.2.8.20.1.1 | NA | ||
row · not-accessible · current Represents entry for Snooping Querier Configuration. | ||||
| CagentSwitchSnoopingQuerierAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.20.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables Snooping Querier on the system.
| ||||
| CagentSwitchSnoopingQuerierVersion | 1.3.6.1.4.1.4526.11.1.2.8.20.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current This specifies the multicast protocol versions that are supported by the system. | ||||
| CagentSwitchSnoopingQuerierAddress | 1.3.6.1.4.1.4526.11.1.2.8.20.1.1.3 | InetAddress | RW | |
column · InetAddress · read-write · current This specifies the default source ip address to be used while generating general queries. | ||||
| CagentSwitchSnoopingQuerierQueryInterval | 1.3.6.1.4.1.4526.11.1.2.8.20.1.1.4 | Integer32 (1..1800) | RW | |
column · Integer32 (1..1800) · read-write · current This specified the timer interval after which the system generates general queries. | ||||
| CagentSwitchSnoopingQuerierExpiryInterval | 1.3.6.1.4.1.4526.11.1.2.8.20.1.1.5 | Integer32 (60..300) | RW | |
column · Integer32 (60..300) · read-write · current This specified the timer interval after which the detected other querier information is no longer valid. | ||||
| TagentSwitchSnoopingQuerierVlanTable | 1.3.6.1.4.1.4526.11.1.2.8.20.2 | NA | ||
table · not-accessible · current A table of the Snooping Querier Vlan configuration entries. | ||||
| RagentSwitchSnoopingQuerierVlanEntry | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1 | NA | ||
row · not-accessible · current Represents entry for a Snooping Querier configurable Vlan. | ||||
| CagentSwitchSnoopingQuerierVlanAdminMode | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables Snooping Querier on a selected Vlan interface.
| ||||
| CagentSwitchSnoopingQuerierVlanOperMode | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This specifies the current state of the Snooping Querier on a selected vlan interface
| ||||
| CagentSwitchSnoopingQuerierElectionParticipateMode | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the specified vlan. When disabled, up on discovering another querier, snooping querier moves to non-querier state.
| ||||
| CagentSwitchSnoopingQuerierVlanAddress | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.4 | InetAddress | RW | |
column · InetAddress · read-write · current This specifies the default source ip address to be used while generating general queries on the specified vlan. | ||||
| CagentSwitchSnoopingQuerierOperVersion | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages. | ||||
| CagentSwitchSnoopingQuerierOperMaxResponseTime | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This object is valid only when agentSwitchSnoopingQuerierOperVersion object is valid. | ||||
| CagentSwitchSnoopingQuerierLastQuerierAddress | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.7 | InetAddress | RO | |
column · InetAddress · read-only · current This specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan. | ||||
| CagentSwitchSnoopingQuerierLastQuerierVersion | 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan. | ||||
| NagentTransferConfigGroup | 1.3.6.1.4.1.4526.11.1.2.9 | |||
| NagentTransferUploadGroup | 1.3.6.1.4.1.4526.11.1.2.9.1 | |||
| SagentTransferUploadMode | 1.3.6.1.4.1.4526.11.1.2.9.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present.
| ||||
| SagentTransferUploadServerIP | 1.3.6.1.4.1.4526.11.1.2.9.1.2 | IpAddress | RW | deprecated |
scalar · IpAddress · read-write · deprecated Transfer upload server IP configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferUploadServerAddress and agentTransferUploadServerAddressType. | ||||
| SagentTransferUploadPath | 1.3.6.1.4.1.4526.11.1.2.9.1.3 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer upload path configures the directory path where the file is to be uploaded to. The switch remembers the last file path used. | ||||
| SagentTransferUploadFilename | 1.3.6.1.4.1.4526.11.1.2.9.1.4 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer upload filename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP. | ||||
| SagentTransferUploadDataType | 1.3.6.1.4.1.4526.11.1.2.9.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap log - Banner File
| ||||
| SagentTransferUploadStart | 1.3.6.1.4.1.4526.11.1.2.9.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer upload start will start an upload transfer.
The agentTransferUploadMode object must not be set to xmodem(2),
ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
| ||||
| SagentTransferUploadStatus | 1.3.6.1.4.1.4526.11.1.2.9.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the current status of an upload transfer.
| ||||
| SagentTransferUploadServerAddressType | 1.3.6.1.4.1.4526.11.1.2.9.1.8 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current The type of the serverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentTransferUploadServerAddressType | ||||
| SagentTransferUploadServerAddress | 1.3.6.1.4.1.4526.11.1.2.9.1.9 | InetAddress | RW | |
scalar · InetAddress · read-write · current Transfer upload serverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The type of this address is determined by the value of the agentTransferUploadServerAddressType object. The values for agentTransferUploadServerAddressType and agentTransferUploadServerAddress must be consistent. | ||||
| SagentTransferUploadImagename | 1.3.6.1.4.1.4526.11.1.2.9.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer upload image name. Sets the image to be uploaded as the specified name Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
| ||||
| SagentTransferUploadUsername | 1.3.6.1.4.1.4526.11.1.2.9.1.11 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current Username applicable only to secure upload types, i.e., SFTP or SCP. | ||||
| SagentTransferUploadPassword | 1.3.6.1.4.1.4526.11.1.2.9.1.12 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Password applicable only to secure upload types, i.e. SFTP or SCP. | ||||
| NagentTransferDownloadGroup | 1.3.6.1.4.1.4526.11.1.2.9.2 | |||
| SagentTransferDownloadMode | 1.3.6.1.4.1.4526.11.1.2.9.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present.
| ||||
| SagentTransferDownloadServerIP | 1.3.6.1.4.1.4526.11.1.2.9.2.2 | IpAddress | RW | deprecated |
scalar · IpAddress · read-write · deprecated Transfer download serverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferDownloadServerAddress and agentTransferDownloadServerAddressType. | ||||
| SagentTransferDownloadPath | 1.3.6.1.4.1.4526.11.1.2.9.2.3 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer download path configures the directory path where the file is located. The switch remembers the last file path used. | ||||
| SagentTransferDownloadFilename | 1.3.6.1.4.1.4526.11.1.2.9.2.4 | DisplayString (SIZE (0..31)) | RW | |
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer download filename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 33 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP. | ||||
| SagentTransferDownloadDataType | 1.3.6.1.4.1.4526.11.1.2.9.2.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File cli-banner - CLI Banner File kernel - Kernel File Note: SSH Key files can only be downloaded if SSH Server is administratively disabled, and there are no active SSH sessions. Kernel file can be downloaded only on raptor platform and linux operating system.
| ||||
| SagentTransferDownloadStart | 1.3.6.1.4.1.4526.11.1.2.9.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer download start will start an download transfer.
The agentTransferDownloadMode object must not be set to xmodem(2),
ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
| ||||
| SagentTransferDownloadStatus | 1.3.6.1.4.1.4526.11.1.2.9.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the current status of an download transfer.
| ||||
| SagentTransferDownloadServerAddressType | 1.3.6.1.4.1.4526.11.1.2.9.2.8 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current The type of the serverip address, as defined in the InetAddress MIB. The agentTransferDownloadServerAddress object is intepreted within the context of agentTransferDownloadServerAddressType | ||||
| SagentTransferDownloadServerAddress | 1.3.6.1.4.1.4526.11.1.2.9.2.9 | InetAddress | RW | |
scalar · InetAddress · read-write · current Transfer download serverip configures the IP address of the server where the file is to be downloaded from.It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The type of this address is determined by the value of the agentTransferDownloadServerAddressType object. The values for agentTransferDownloadServerAddressType and agentTransferDownloadServerAddress must be consistent. | ||||
| SagentTransferDownloadImagename | 1.3.6.1.4.1.4526.11.1.2.9.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Transfer download image name. Sets the downloaded image as the specified name Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
| ||||
| SagentTransferDownloadUsername | 1.3.6.1.4.1.4526.11.1.2.9.2.11 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current Username applicable only to secure download types, i.e., SFTP or SCP. | ||||
| SagentTransferDownloadPassword | 1.3.6.1.4.1.4526.11.1.2.9.2.12 | DisplayString (SIZE (0..64)) | RW | |
scalar · DisplayString (SIZE (0..64)) · read-write · current Password applicable only to secure download types, i.e. SFTP or SCP. | ||||
| NagentImageConfigGroup | 1.3.6.1.4.1.4526.11.1.2.9.3 | |||
| SagentImage1 | 1.3.6.1.4.1.4526.11.1.2.9.3.1 | DisplayString (SIZE (1..32)) | RO | |
scalar · DisplayString (SIZE (1..32)) · read-only · current The image1 softwate version . | ||||
| SagentImage2 | 1.3.6.1.4.1.4526.11.1.2.9.3.2 | DisplayString (SIZE (1..32)) | RO | |
scalar · DisplayString (SIZE (1..32)) · read-only · current The image2 software version. | ||||
| SagentActiveImage | 1.3.6.1.4.1.4526.11.1.2.9.3.3 | DisplayString (SIZE (1..32)) | RO | |
scalar · DisplayString (SIZE (1..32)) · read-only · current The active image name. image1 or image2. | ||||
| SagentNextActiveImage | 1.3.6.1.4.1.4526.11.1.2.9.3.4 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current The next active image name. user assigns either image1 or image2. | ||||
| NagentPortMirroringGroup | 1.3.6.1.4.1.4526.11.1.2.10 | |||
| SagentMirroredPortIfIndex | 1.3.6.1.4.1.4526.11.1.2.10.1 | Integer32 | RW | obsolete |
scalar · Integer32 · read-write · obsolete IfIndex of the mirrored port | ||||
| SagentProbePortIfIndex | 1.3.6.1.4.1.4526.11.1.2.10.2 | Integer32 | RW | obsolete |
scalar · Integer32 · read-write · obsolete IfIndex of the probe port | ||||
| SagentPortMirroringMode | 1.3.6.1.4.1.4526.11.1.2.10.3 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
| ||||
| TagentPortMirrorTable | 1.3.6.1.4.1.4526.11.1.2.10.4 | NA | ||
table · not-accessible · current This table includes entries for each Port Mirroring session. | ||||
| RagentPortMirrorEntry | 1.3.6.1.4.1.4526.11.1.2.10.4.1 | NA | ||
row · not-accessible · current Provides configuration of a Port Mirroring session specifying the destination port, and the source Port Mask, providing a many-to-one mapping. | ||||
| CagentPortMirrorSessionNum | 1.3.6.1.4.1.4526.11.1.2.10.4.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant. | ||||
| CagentPortMirrorDestinationPort | 1.3.6.1.4.1.4526.11.1.2.10.4.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The port which traffic from the mirrored ports will be sent to. | ||||
| CagentPortMirrorSourcePortMask | 1.3.6.1.4.1.4526.11.1.2.10.4.1.3 | AgentPortMask | RW | |
column · AgentPortMask · read-write · current The ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports. | ||||
| CagentPortMirrorAdminMode | 1.3.6.1.4.1.4526.11.1.2.10.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The status of this port mirroring session.
enable(1) - This session is active and all traffic from the source ports
will be mirrored to the destination port.
disable(2) - This session is not active.
delete(3) - Remove the configuration for this Session
| ||||
| TagentPortMirrorTypeTable | 1.3.6.1.4.1.4526.11.1.2.10.5 | NA | ||
table · not-accessible · current This table includes entries for each source port's direction of port mirroring. | ||||
| RagentPortMirrorTypeEntry | 1.3.6.1.4.1.4526.11.1.2.10.5.1 | NA | ||
row · not-accessible · current Provides configuration of a Port Mirroring direction specifying the session of the port mirroring and source port | ||||
| CagentPortMirrorTypeSourcePort | 1.3.6.1.4.1.4526.11.1.2.10.5.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The port from which traffic will be sent to the destination port. This port should be a source port in the corresponding session | ||||
| CagentPortMirrorTypeType | 1.3.6.1.4.1.4526.11.1.2.10.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The direction of the data to be mirrored on this source port. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on the source port. txrx(3) - The data that is transmitted/received from/on the source port
| ||||
| TagentDot3adAggPortTable | 1.3.6.1.4.1.4526.11.1.2.12 | NA | ||
table · not-accessible · current This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB. | ||||
| RagentDot3adAggPortEntry | 1.3.6.1.4.1.4526.11.1.2.12.1 | NA | ||
row · not-accessible · current Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
| ||||
| CagentDot3adAggPort | 1.3.6.1.4.1.4526.11.1.2.12.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current ifIndex of this physical port | ||||
| CagentDot3adAggPortLACPMode | 1.3.6.1.4.1.4526.11.1.2.12.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable 802.3ad LACP on this port
| ||||
| TagentPortConfigTable | 1.3.6.1.4.1.4526.11.1.2.13 | NA | ||
table · not-accessible · current A table of the switch's physical port config entries | ||||
| RagentPortConfigEntry | 1.3.6.1.4.1.4526.11.1.2.13.1 | NA | ||
| CagentPortDot1dBasePort | 1.3.6.1.4.1.4526.11.1.2.13.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The port number of this port. | ||||
| CagentPortIfIndex | 1.3.6.1.4.1.4526.11.1.2.13.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The switch's Port IfIndex | ||||
| CagentPortIanaType | 1.3.6.1.4.1.4526.11.1.2.13.1.3 | IANAifType | RO | |
column · IANAifType · read-only · current The switch's Port Type | ||||
| CagentPortSTPMode | 1.3.6.1.4.1.4526.11.1.2.13.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
| ||||
| CagentPortSTPState | 1.3.6.1.4.1.4526.11.1.2.13.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
| ||||
| CagentPortAdminMode | 1.3.6.1.4.1.4526.11.1.2.13.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The switch's Port Admin Mode
| ||||
| CagentPortPhysicalMode | 1.3.6.1.4.1.4526.11.1.2.13.1.7 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
| ||||
| CagentPortPhysicalStatus | 1.3.6.1.4.1.4526.11.1.2.13.1.8 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete The switch's Port Physical Speed Status. This is the current actual speed.
| ||||
| CagentPortLinkTrapMode | 1.3.6.1.4.1.4526.11.1.2.13.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current If enabled, link up and link down traps will be sent for this port.
| ||||
| CagentPortClearStats | 1.3.6.1.4.1.4526.11.1.2.13.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current clear stats for this port only
| ||||
| CagentPortDefaultType | 1.3.6.1.4.1.4526.11.1.2.13.1.11 | OBJECT IDENTIFIER | RW | |
column · OBJECT IDENTIFIER · read-write · current This object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by agentPortType.
The set of possible values for this object is
the same as the set defined for the agentPortType
object.
This object represents the administratively-configured type of
the MAU. If auto-negotiation is not enabled or is not
implemented for this MAU, the value of this object determines
the operational type of the MAU. In this case, a set to this
object will force the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for this MAU,
the operational type of the MAU is determined by auto-negotiation,
and the value of this object denotes the type to which the MAU
will automatically revert if/when auto-negotiation is later disabled.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType10GBaseSX | ||||
| CagentPortType | 1.3.6.1.4.1.4526.11.1.2.13.1.12 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType10GBaseSX | ||||
| CagentPortAutoNegAdminStatus | 1.3.6.1.4.1.4526.11.1.2.13.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the administration status of auto negotiation for this port.
| ||||
| CagentPortDot3FlowControlMode | 1.3.6.1.4.1.4526.11.1.2.13.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports.
| ||||
| CagentPortMaxFrameSizeLimit | 1.3.6.1.4.1.4526.11.1.2.13.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the largest value that can be configured for agentPortMaxFrameSize | ||||
| CagentPortMaxFrameSize | 1.3.6.1.4.1.4526.11.1.2.13.1.19 | Integer32 | RW | |
column · Integer32 · read-write · current This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522 | ||||
| CagentPortBroadcastControlMode | 1.3.6.1.4.1.4526.11.1.2.13.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
| ||||
| CagentPortBroadcastControlThreshold | 1.3.6.1.4.1.4526.11.1.2.13.1.21 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Configures the broadcast storm recovery threshold for this port as a percentage of port speed. | ||||
| CagentPortMulticastControlMode | 1.3.6.1.4.1.4526.11.1.2.13.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current If enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
| ||||
| CagentPortMulticastControlThreshold | 1.3.6.1.4.1.4526.11.1.2.13.1.23 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Configures the multicast storm recovery threshold for this port as a percentage of port speed. | ||||
| CagentPortUnicastControlMode | 1.3.6.1.4.1.4526.11.1.2.13.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current If enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
| ||||
| CagentPortUnicastControlThreshold | 1.3.6.1.4.1.4526.11.1.2.13.1.25 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Configures the unicast storm recovery threshold for this port as a percentage of port speed. | ||||
| NagentStpSwitchConfigGroup | 1.3.6.1.4.1.4526.11.1.2.15 | |||
| SagentStpConfigDigestKey | 1.3.6.1.4.1.4526.11.1.2.15.1 | OCTET STRING (SIZE (16)) | RO | |
scalar · OCTET STRING (SIZE (16)) · read-only · current The MST configuration digest key. | ||||
| SagentStpConfigFormatSelector | 1.3.6.1.4.1.4526.11.1.2.15.2 | Unsigned32 (0..255) | RO | |
scalar · Unsigned32 (0..255) · read-only · current The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard. | ||||
| SagentStpConfigName | 1.3.6.1.4.1.4526.11.1.2.15.3 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current The MST configuration name of at most 32 characters. | ||||
| SagentStpConfigRevision | 1.3.6.1.4.1.4526.11.1.2.15.4 | Unsigned32 (0..65535) | RW | |
scalar · Unsigned32 (0..65535) · read-write · current The MST configuration revision. The default value is 1. | ||||
| SagentStpForceVersion | 1.3.6.1.4.1.4526.11.1.2.15.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The MST configuration force protocol version. The default version is dot1s.
| ||||
| SagentStpAdminMode | 1.3.6.1.4.1.4526.11.1.2.15.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch. The default status is disabled.
| ||||
| SagentStpBpduGuardMode | 1.3.6.1.4.1.4526.11.1.2.15.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status is disabled.
| ||||
| SagentStpBpduFilterDefault | 1.3.6.1.4.1.4526.11.1.2.15.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Filter Mode on the switch. The default status is disabled.
| ||||
| TagentStpPortTable | 1.3.6.1.4.1.4526.11.1.2.15.9 | NA | ||
table · not-accessible · current STP port table. | ||||
| RagentStpPortEntry | 1.3.6.1.4.1.4526.11.1.2.15.9.1 | NA | ||
| CagentStpPortState | 1.3.6.1.4.1.4526.11.1.2.15.9.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative STP state for the port. enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled for the first 4095 ports and disabled for any ports beyond.
| ||||
| CagentStpPortStatsMstpBpduRx | 1.3.6.1.4.1.4526.11.1.2.15.9.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The MSTP BPDUs received on a specific port. | ||||
| CagentStpPortStatsMstpBpduTx | 1.3.6.1.4.1.4526.11.1.2.15.9.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The MSTP BPDUs sent from a specific port. | ||||
| CagentStpPortStatsRstpBpduRx | 1.3.6.1.4.1.4526.11.1.2.15.9.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The RSTP BPDUs received on a specific port. | ||||
| CagentStpPortStatsRstpBpduTx | 1.3.6.1.4.1.4526.11.1.2.15.9.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The RSTP BPDUs sent from a specific port. | ||||
| CagentStpPortStatsStpBpduRx | 1.3.6.1.4.1.4526.11.1.2.15.9.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The STP BPDUs received on a specific port. | ||||
| CagentStpPortStatsStpBpduTx | 1.3.6.1.4.1.4526.11.1.2.15.9.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The STP BPDUs sent from a specific port. | ||||
| CagentStpPortUpTime | 1.3.6.1.4.1.4526.11.1.2.15.9.1.8 | TimeTicks | RO | |
column · TimeTicks · read-only · current Time since port was reset. It is displayed in days, hours, minutes, and seconds. | ||||
| CagentStpPortMigrationCheck | 1.3.6.1.4.1.4526.11.1.2.15.9.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates that BPDUs are to be sent on the specified port.
| ||||
| CagentStpPortHelloTime | 1.3.6.1.4.1.4526.11.1.2.15.9.1.10 | Unsigned32 (1..10) | RW | |
column · Unsigned32 (1..10) · read-write · current Hello time for the STP port. The default value is 2. | ||||
| NagentStpCstConfigGroup | 1.3.6.1.4.1.4526.11.1.2.15.10 | |||
| SagentStpCstHelloTime | 1.3.6.1.4.1.4526.11.1.2.15.10.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The MSTP root port hello time for the CIST. | ||||
| SagentStpCstMaxAge | 1.3.6.1.4.1.4526.11.1.2.15.10.2 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The MSTP root port max age for the CIST. | ||||
| SagentStpCstRegionalRootId | 1.3.6.1.4.1.4526.11.1.2.15.10.3 | OCTET STRING (SIZE (8)) | RO | |
scalar · OCTET STRING (SIZE (8)) · read-only · current The MSTP regional root identifier for the CIST. | ||||
| SagentStpCstRegionalRootPathCost | 1.3.6.1.4.1.4526.11.1.2.15.10.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The MSTP regional root path cost for the CIST. | ||||
| SagentStpCstRootFwdDelay | 1.3.6.1.4.1.4526.11.1.2.15.10.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The MSTP root port forward delay for the CIST. | ||||
| SagentStpCstBridgeFwdDelay | 1.3.6.1.4.1.4526.11.1.2.15.10.6 | Unsigned32 (4..30) | RW | |
scalar · Unsigned32 (4..30) · read-write · current The MSTP bridge forward delay for the CIST. The default value is 15. | ||||
| SagentStpCstBridgeHelloTime | 1.3.6.1.4.1.4526.11.1.2.15.10.7 | Unsigned32 (1..10) | RO | |
scalar · Unsigned32 (1..10) · read-only · current The MSTP bridge hello time for the CIST. The default value is 2. According to IEEE 802.1Q-REV 2005 updating hello time is disallowed | ||||
| SagentStpCstBridgeHoldTime | 1.3.6.1.4.1.4526.11.1.2.15.10.8 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The MSTP bridge hold time for the CIST. | ||||
| SagentStpCstBridgeMaxAge | 1.3.6.1.4.1.4526.11.1.2.15.10.9 | Unsigned32 (6..40) | RW | |
scalar · Unsigned32 (6..40) · read-write · current The MSTP bridge max age for the CIST. The default value is 20. | ||||
| SagentStpCstBridgeMaxHops | 1.3.6.1.4.1.4526.11.1.2.15.10.10 | Unsigned32 (1..127) | RW | |
scalar · Unsigned32 (1..127) · read-write · current The MSTP bridge max hops for the CIST. The default value is 20. | ||||
| SagentStpCstBridgePriority | 1.3.6.1.4.1.4526.11.1.2.15.10.11 | Unsigned32 (0..61440) | RW | |
scalar · Unsigned32 (0..61440) · read-write · current The MSTP bridge priority for the CIST. The default value is 32768. | ||||
| SagentStpCstBridgeHoldCount | 1.3.6.1.4.1.4526.11.1.2.15.10.12 | Unsigned32 (1..10) | RW | |
scalar · Unsigned32 (1..10) · read-write · current The MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default value is 6. | ||||
| SagentStpCstTimeSinceTopologyChange | 1.3.6.1.4.1.4526.11.1.2.15.10.13 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The MSTP time since the last topology change for the CIST. | ||||
| SagentStpCstTopologyChangeCount | 1.3.6.1.4.1.4526.11.1.2.15.10.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current The MSTP count of topology changes for the CIST. | ||||
| TagentStpCstPortTable | 1.3.6.1.4.1.4526.11.1.2.15.11 | NA | ||
table · not-accessible · current CIST port table. | ||||
| RagentStpCstPortEntry | 1.3.6.1.4.1.4526.11.1.2.15.11.1 | NA | ||
| CagentStpCstPortOperEdge | 1.3.6.1.4.1.4526.11.1.2.15.11.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The MSTP operational status of a specific port for the CIST.
| ||||
| CagentStpCstPortOperPointToPoint | 1.3.6.1.4.1.4526.11.1.2.15.11.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The MSTP operational point to point mac of a specific port for the CIST.
| ||||
| CagentStpCstPortTopologyChangeAck | 1.3.6.1.4.1.4526.11.1.2.15.11.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The MSTP topology change acknowledge for a specific port in the CIST.
| ||||
| CagentStpCstPortEdge | 1.3.6.1.4.1.4526.11.1.2.15.11.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.
| ||||
| CagentStpCstPortForwardingState | 1.3.6.1.4.1.4526.11.1.2.15.11.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The MSTP forwarding state of a specific port in CIST.
| ||||
| CagentStpCstPortId | 1.3.6.1.4.1.4526.11.1.2.15.11.1.6 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The MSTP port identifier of a specific port in CIST. | ||||
| CagentStpCstPortPathCost | 1.3.6.1.4.1.4526.11.1.2.15.11.1.7 | Unsigned32 (0..200000000) | RW | |
column · Unsigned32 (0..200000000) · read-write · current The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. | ||||
| CagentStpCstPortPriority | 1.3.6.1.4.1.4526.11.1.2.15.11.1.8 | Unsigned32 (0..240) | RW | |
column · Unsigned32 (0..240) · read-write · current The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128. | ||||
| CagentStpCstDesignatedBridgeId | 1.3.6.1.4.1.4526.11.1.2.15.11.1.9 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP designated bridge ID of a specific port in CIST. | ||||
| CagentStpCstDesignatedCost | 1.3.6.1.4.1.4526.11.1.2.15.11.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The MSTP designated cost of a specific port in CIST. | ||||
| CagentStpCstDesignatedPortId | 1.3.6.1.4.1.4526.11.1.2.15.11.1.11 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The MSTP designated port ID of a specific port in CIST. | ||||
| CagentStpCstExtPortPathCost | 1.3.6.1.4.1.4526.11.1.2.15.11.1.12 | Unsigned32 (0..200000000) | RW | |
column · Unsigned32 (0..200000000) · read-write · current The MSTP external port path cost in CIST. The default value varies depending upon the link speed. | ||||
| CagentStpCstPortBpduGuardEffect | 1.3.6.1.4.1.4526.11.1.2.15.11.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.
| ||||
| CagentStpCstPortBpduFilter | 1.3.6.1.4.1.4526.11.1.2.15.11.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.
| ||||
| CagentStpCstPortBpduFlood | 1.3.6.1.4.1.4526.11.1.2.15.11.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current This command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port.
| ||||
| CagentStpCstPortAutoEdge | 1.3.6.1.4.1.4526.11.1.2.15.11.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is disabled.
| ||||
| CagentStpCstPortRootGuard | 1.3.6.1.4.1.4526.11.1.2.15.11.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put into discarding state and does not forward any packets. enable(1) - enables the root-guard mode for the port. disable(2) - disables the root-guard mode for the port. The default root-guard mode is disabled.
| ||||
| CagentStpCstPortTCNGuard | 1.3.6.1.4.1.4526.11.1.2.15.11.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the port. disable(2) - disables the tcn-guard mode for the port. The default tcn-guard mode is disabled.
| ||||
| TagentStpMstTable | 1.3.6.1.4.1.4526.11.1.2.15.12 | NA | ||
table · not-accessible · current MST table. | ||||
| RagentStpMstEntry | 1.3.6.1.4.1.4526.11.1.2.15.12.1 | NA | ||
| CagentStpMstId | 1.3.6.1.4.1.4526.11.1.2.15.12.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The MSTP instance ID. | ||||
| CagentStpMstBridgePriority | 1.3.6.1.4.1.4526.11.1.2.15.12.1.2 | Unsigned32 (0..61440) | RW | |
column · Unsigned32 (0..61440) · read-write · current The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768. | ||||
| CagentStpMstBridgeIdentifier | 1.3.6.1.4.1.4526.11.1.2.15.12.1.3 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP bridge identifier in a specific instance. | ||||
| CagentStpMstDesignatedRootId | 1.3.6.1.4.1.4526.11.1.2.15.12.1.4 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP designated root bridge identifier in a specific instance. | ||||
| CagentStpMstRootPathCost | 1.3.6.1.4.1.4526.11.1.2.15.12.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The MSTP root path cost in a specific instance. | ||||
| CagentStpMstRootPortId | 1.3.6.1.4.1.4526.11.1.2.15.12.1.6 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP root port ID in a specific instance. | ||||
| CagentStpMstTimeSinceTopologyChange | 1.3.6.1.4.1.4526.11.1.2.15.12.1.7 | TimeTicks | RO | |
column · TimeTicks · read-only · current The MSTP time since the last topology change in a specific instance. | ||||
| CagentStpMstTopologyChangeCount | 1.3.6.1.4.1.4526.11.1.2.15.12.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The MSTP count of topology changes in a specific instance. | ||||
| CagentStpMstTopologyChangeParm | 1.3.6.1.4.1.4526.11.1.2.15.12.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The MSTP topology change parameter in a specific instance.
| ||||
| CagentStpMstRowStatus | 1.3.6.1.4.1.4526.11.1.2.15.12.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance. | ||||
| TagentStpMstPortTable | 1.3.6.1.4.1.4526.11.1.2.15.13 | NA | ||
table · not-accessible · current MST port table. | ||||
| RagentStpMstPortEntry | 1.3.6.1.4.1.4526.11.1.2.15.13.1 | NA | ||
| CagentStpMstPortForwardingState | 1.3.6.1.4.1.4526.11.1.2.15.13.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The MSTP forwarding state of a specific port in a specific instance.
| ||||
| CagentStpMstPortId | 1.3.6.1.4.1.4526.11.1.2.15.13.1.2 | OCTET STRING (SIZE (4)) | RO | |
column · OCTET STRING (SIZE (4)) · read-only · current The MSTP port identifier of a specific port in a specific instance. | ||||
| CagentStpMstPortPathCost | 1.3.6.1.4.1.4526.11.1.2.15.13.1.3 | Unsigned32 (0..200000000) | RW | |
column · Unsigned32 (0..200000000) · read-write · current The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. | ||||
| CagentStpMstPortPriority | 1.3.6.1.4.1.4526.11.1.2.15.13.1.4 | Unsigned32 (0..240) | RW | |
column · Unsigned32 (0..240) · read-write · current The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128. | ||||
| CagentStpMstDesignatedBridgeId | 1.3.6.1.4.1.4526.11.1.2.15.13.1.5 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP designated bridge ID of a specific port in a specific instance. | ||||
| CagentStpMstDesignatedCost | 1.3.6.1.4.1.4526.11.1.2.15.13.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The MSTP designated cost of a specific port in a specific instance. | ||||
| CagentStpMstDesignatedPortId | 1.3.6.1.4.1.4526.11.1.2.15.13.1.7 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The MSTP designated port ID of a specific port in a specific instance. | ||||
| TagentStpMstVlanTable | 1.3.6.1.4.1.4526.11.1.2.15.14 | NA | ||
table · not-accessible · current MST VLAN table. | ||||
| RagentStpMstVlanEntry | 1.3.6.1.4.1.4526.11.1.2.15.14.1 | NA | ||
| CagentStpMstVlanRowStatus | 1.3.6.1.4.1.4526.11.1.2.15.14.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN. | ||||
| NagentAuthenticationGroup | 1.3.6.1.4.1.4526.11.1.2.16 | |||
| SagentAuthenticationListCreate | 1.3.6.1.4.1.4526.11.1.2.16.1 | DisplayString (SIZE (0 | 1..15)) | RW | |
scalar · DisplayString (SIZE (0 | 1..15)) · read-write · current Authentication List Create If set to a non empty string, creates a new Authentication List for configuration. | ||||
| TagentAuthenticationListTable | 1.3.6.1.4.1.4526.11.1.2.16.2 | NA | ||
table · not-accessible · current MST VLAN table. | ||||
| RagentAuthenticationListEntry | 1.3.6.1.4.1.4526.11.1.2.16.2.1 | NA | ||
| CagentAuthenticationListIndex | 1.3.6.1.4.1.4526.11.1.2.16.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Authenticaiton List Index Unique number used for indexing into this table. | ||||
| CagentAuthenticationListName | 1.3.6.1.4.1.4526.11.1.2.16.2.1.2 | DisplayString (SIZE (1..15)) | RO | |
column · DisplayString (SIZE (1..15)) · read-only · current Authenticaiton List Name Unique name used to identify the Authentication List from other tables. | ||||
| CagentAuthenticationListMethod1 | 1.3.6.1.4.1.4526.11.1.2.16.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Authenticion List Method 1 Configures the first authentication method to use when this list is specified.
| ||||
| CagentAuthenticationListMethod2 | 1.3.6.1.4.1.4526.11.1.2.16.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Authenticion List Method 2 Configures the second authentication method to use when this list is specified.
| ||||
| CagentAuthenticationListMethod3 | 1.3.6.1.4.1.4526.11.1.2.16.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Authenticion List Method 3 Configures the third authentication method to use when this list is specified.
| ||||
| CagentAuthenticationListStatus | 1.3.6.1.4.1.4526.11.1.2.16.2.1.6 | RowStatus | RW | |
column · RowStatus · read-write · current The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List. | ||||
| CagentAuthenticationListMethod4 | 1.3.6.1.4.1.4526.11.1.2.16.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Authenticion List Method 4 Configures the fourth authentication method to use when this list is specified.
| ||||
| SagentUserConfigDefaultAuthenticationList | 1.3.6.1.4.1.4526.11.1.2.16.3 | DisplayString (SIZE (1..15)) | RW | |
scalar · DisplayString (SIZE (1..15)) · read-write · current Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list must be configured before setting. | ||||
| TagentUserAuthenticationConfigTable | 1.3.6.1.4.1.4526.11.1.2.16.4 | NA | ||
table · not-accessible · current User Authentication Config Table | ||||
| RagentUserAuthenticationConfigEntry | 1.3.6.1.4.1.4526.11.1.2.16.4.1 | NA | ||
| CagentUserAuthenticationList | 1.3.6.1.4.1.4526.11.1.2.16.4.1.1 | DisplayString (SIZE (1..15)) | RW | |
column · DisplayString (SIZE (1..15)) · read-write · current User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting. | ||||
| TagentUserPortConfigTable | 1.3.6.1.4.1.4526.11.1.2.16.5 | NA | ||
table · not-accessible · current User Port Config Table | ||||
| RagentUserPortConfigEntry | 1.3.6.1.4.1.4526.11.1.2.16.5.1 | NA | ||
| CagentUserPortSecurity | 1.3.6.1.4.1.4526.11.1.2.16.5.1.1 | AgentPortMask | RW | |
column · AgentPortMask · read-write · current User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable. | ||||
| NagentClassOfServiceGroup | 1.3.6.1.4.1.4526.11.1.2.17 | |||
| TagentClassOfServicePortTable | 1.3.6.1.4.1.4526.11.1.2.17.1 | NA | ||
table · not-accessible · current A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port. | ||||
| RagentClassOfServicePortEntry | 1.3.6.1.4.1.4526.11.1.2.17.1.1 | NA | ||
row · not-accessible · current A 802.1p priority mapped to a traffic class priority queue. | ||||
| CagentClassOfServicePortPriority | 1.3.6.1.4.1.4526.11.1.2.17.1.1.1 | INTEGER (0..7) | NA | |
column · INTEGER (0..7) · not-accessible · current The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. | ||||
| CagentClassOfServicePortClass | 1.3.6.1.4.1.4526.11.1.2.17.1.1.2 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Traffic class priority queue the received frame is mapped to. | ||||
| NagentHTTPConfigGroup | 1.3.6.1.4.1.4526.11.1.2.18 | |||
| SagentHTTPWebMode | 1.3.6.1.4.1.4526.11.1.2.18.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures the HTTP server admin mode
| ||||
| SagentHTTPJavaMode | 1.3.6.1.4.1.4526.11.1.2.18.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures the use of the Java interface through Web connections.
| ||||
| SagentHTTPMaxSessions | 1.3.6.1.4.1.4526.11.1.2.18.3 | Integer32 (0..16) | RW | |
scalar · Integer32 (0..16) · read-write · current Configures the maximum number of allowable HTTP sessions. The default value is 16. | ||||
| SagentHTTPHardTimeout | 1.3.6.1.4.1.4526.11.1.2.18.4 | Integer32 (0..168) | RW | |
scalar · Integer32 (0..168) · read-write · current Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. A value of 0 gives an infinite timeout. | ||||
| SagentHTTPSoftTimeout | 1.3.6.1.4.1.4526.11.1.2.18.5 | Integer32 (0..60) | RW | |
scalar · Integer32 (0..60) · read-write · current Configures the soft (activity) timeout for HTTP sessions in minutes. The default value is 5 minutes. A value of 0 gives an infinite timeout. | ||||
| NagentSystemGroup | 1.3.6.1.4.1.4526.11.1.3 | |||
| SagentSaveConfig | 1.3.6.1.4.1.4526.11.1.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current enable(1) will initiate an configuration save to nvram. Status is returned by the object agentSaveConfigStatus.
| ||||
| SagentClearConfig | 1.3.6.1.4.1.4526.11.1.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current clear config to factory defaults
| ||||
| SagentClearLags | 1.3.6.1.4.1.4526.11.1.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current clear lag configuration
| ||||
| SagentClearLoginSessions | 1.3.6.1.4.1.4526.11.1.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current close all telnet sessions
| ||||
| SagentClearPasswords | 1.3.6.1.4.1.4526.11.1.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current reset passwords
| ||||
| SagentClearPortStats | 1.3.6.1.4.1.4526.11.1.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current clear all port statistics
| ||||
| SagentClearSwitchStats | 1.3.6.1.4.1.4526.11.1.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current clear all switch statistics
| ||||
| SagentClearTrapLog | 1.3.6.1.4.1.4526.11.1.3.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current clear trap log
| ||||
| SagentClearVlan | 1.3.6.1.4.1.4526.11.1.3.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current clear vlan entries
| ||||
| SagentResetSystem | 1.3.6.1.4.1.4526.11.1.3.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Resets the switch. This object is not valid for stacking platforms.
| ||||
| SagentSaveConfigStatus | 1.3.6.1.4.1.4526.11.1.3.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the current status of an save configuration request.
| ||||
| NagentCableTesterGroup | 1.3.6.1.4.1.4526.11.1.4 | |||
| SagentCableTesterStatus | 1.3.6.1.4.1.4526.11.1.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Status of the Virtual Cable Tester
active(1) - cable testing is in progress. Set to this value
to start the test.
success(2) - A successful test was performed. Cannot be set.
failure(3) - A failure was encountered during the test.
Cannot be set.
uninitialized(4) - No test has been performed yet. Cannot be set.
| ||||
| SagentCableTesterIfIndex | 1.3.6.1.4.1.4526.11.1.4.2 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Determines on which port to perform the cable test. Limited to copper based ports. | ||||
| SagentCableTesterCableStatus | 1.3.6.1.4.1.4526.11.1.4.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the results of the Cable Test.
normal(1) - The cable is working correctly.
open(2) - The cable is disconnected or there is a faulty
connector.
short(3) - There is an electrical short in the cable.
unknown(4) - No test has been performed yet, or a test is
currently in progress.
| ||||
| SagentCableTesterMinimumCableLength | 1.3.6.1.4.1.4526.11.1.4.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown. | ||||
| SagentCableTesterMaximumCableLength | 1.3.6.1.4.1.4526.11.1.4.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown. | ||||
| SagentCableTesterCableFailureLocation | 1.3.6.1.4.1.4526.11.1.4.6 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2). | ||||
Textual conventions
AgentPortMaskOCTET STRINGEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0' When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports.
Ipv6AddressOCTET STRING (SIZE (16))Display hint:
2x:This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order.
Ipv6AddressIfIdentifierOCTET STRING (SIZE (0..8))Display hint:
2x:This data type is used to model IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order.
Ipv6AddressPrefixOCTET STRING (SIZE (0..16))Display hint:
2x:This data type is used to model IPv6 address prefixes. This is a binary string of up to 16 octets in network byte-order.
Ipv6IfIndexInteger32 (1..2147483647)Display hint:
dA unique value, greater than zero for each internetwork-layer interface in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each internetwork-layer interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Ipv6IfIndexOrZeroInteger32 (0..2147483647)Display hint:
dThis textual convention is an extension of the Ipv6IfIndex convention. The latter defines a greater than zero value used to identify an IPv6 interface in the managed system. This extension permits the additional value of zero. The value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced.
PortListOCTET STRINGEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
VlanListOCTET STRINGEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan supported is represented by a single bit within the value of this object. If that bit has a value of '1' then the associated port is in that vlan; the port is not included if the vlans bit has a value of '0'.
Traps / Notifications
- broadcastStormEndTrap
1.3.6.1.4.1.4526.11.1.0.3 - broadcastStormStartTrap
1.3.6.1.4.1.4526.11.1.0.2 - failedUserLoginTrap
1.3.6.1.4.1.4526.11.1.0.13 - fanFailureTrap
1.3.6.1.4.1.4526.11.1.0.9 - linkFailureTrap
1.3.6.1.4.1.4526.11.1.0.4 - macAddrAgeoutTrap
1.3.6.1.4.1.4526.11.1.0.16 - macAddrLearnTrap
1.3.6.1.4.1.4526.11.1.0.15 - multipleUsersTrap
1.3.6.1.4.1.4526.11.1.0.1 - powerSupplyStatusChangeTrap
1.3.6.1.4.1.4526.11.1.0.12 - stpInstanceNewRootTrap
1.3.6.1.4.1.4526.11.1.0.10 - stpInstanceTopologyChangeTrap
1.3.6.1.4.1.4526.11.1.0.11 - userLockoutTrap
1.3.6.1.4.1.4526.11.1.0.14 - vlanDefaultCfgFailureTrap
1.3.6.1.4.1.4526.11.1.0.7 - vlanDeleteLastTrap
1.3.6.1.4.1.4526.11.1.0.6 - vlanRequestFailureTrap
1.3.6.1.4.1.4526.11.1.0.5 - vlanRestoreFailureTrap
1.3.6.1.4.1.4526.11.1.0.8