NBS-TUNABLE-MIB
NBASE Switch CommunicationMIB for representing Tunable Optics parameters
snmptranslate -m NBS-TUNABLE-MIB -Tpsnmpwalk -v2c -c <community> -m NBS-TUNABLE-MIB <host> 1.3.6.1.4.1.629.203Imports
| IF-MIB | InterfaceIndex |
|---|---|
| NBS-MIB | nbs |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| InbsTunableMib | 1.3.6.1.4.1.629.203 | |||
identity MIB for representing Tunable Optics parameters | ||||
| NnbsTunableGrp | 1.3.6.1.4.1.629.203.1 | |||
node · current MIB for representing Tunable Optics parameters | ||||
| SnbsTunableChannelTableSize | 1.3.6.1.4.1.629.203.1.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The number of entries in nbsTunableChannelTable. | ||||
| TnbsTunableChannelTable | 1.3.6.1.4.1.629.203.1.2 | NA | ||
table · not-accessible · current A table to report and configure tunable optics settings. | ||||
| RnbsTunableChannelEntry | 1.3.6.1.4.1.629.203.1.2.1 | NA | ||
row · not-accessible · current Describes a setting for an interface's tunable optics. | ||||
| CnbsTunableChannelIfIndex | 1.3.6.1.4.1.629.203.1.2.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The Mib2 ifIndex of this optic's port | ||||
| CnbsTunableChannelFreqStart | 1.3.6.1.4.1.629.203.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The first allowable frequency for this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9. For L-Band, ITU Grid 48 is '184800' For Q-Band, ITU Grid 48 is '184850' For C-Band, ITU Grid 1 is '190100' For H-Band, ITU Grid 1 is '190150' If GHz does not provide the appropriate resolution, the tunable optic may report a FreqExponent less than 9. If 32 bits is insufficient to cover the range in GHz, the tunable optic may report a FreqExponent greater than 9. Not supported value: 0 | ||||
| CnbsTunableChannelFreqEnd | 1.3.6.1.4.1.629.203.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The last allowable frequency (inclusive) for this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9. For L-Band, ITU Grid 99 is '189900' For Q-Band, ITU Grid 99 is '189950' For C-Band, ITU Grid 72 is '197200' For H-Band, ITU Grid 72 is '197250' If GHz does not provide the appropriate resolution, the tunable optic may report a FreqExponent less than 9. If 32 bits is insufficient to cover the range in GHz, the tunable optic may report a FreqExponent greater than 9. Not supported value: 0 | ||||
| CnbsTunableChannelFreqStep | 1.3.6.1.4.1.629.203.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The spacing of the allowable frequencies that this tunable optic supports, in GigaHertz (GHz), unless FreqExponent != 9. 100 indicates the standard ITU grid spacing of 100GHz. For example, if this tunable optic supports both C and H band, or both Q and L band, FreqStep should report 50. If this tunable optic supports steps finer than 1GHz, the tunable optic may report a FreqExponent less than 9. Not supported value: 0 | ||||
| CnbsTunableChannelFreqExponent | 1.3.6.1.4.1.629.203.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The exponent of all the Freq values (including FreqStep). 9 (the default) indicates all units are in GigaHertz (GHz). | ||||
| CnbsTunableChannelFreqAdmin | 1.3.6.1.4.1.629.203.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The administratively desired frequency of this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0 | ||||
| CnbsTunableChannelFreqOper | 1.3.6.1.4.1.629.203.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational frequency of this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0 | ||||
| CnbsTunableChannelFreqDefault | 1.3.6.1.4.1.629.203.1.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The default frequency of this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0 | ||||