MOXA-PT7528V2-MIB
Moxa Technologies Co., Ltd.The MIB module for Moxa PT-7528 series specific information.
snmptranslate -m MOXA-PT7528V2-MIB -Tpsnmpwalk -v2c -c <community> -m MOXA-PT7528V2-MIB <host> 1.3.6.1.4.1.8691.7.85Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nmoxa | 1.3.6.1.4.1.8691 | ||||||||||||||||
| NindustrialEthernet | 1.3.6.1.4.1.8691.7 | ||||||||||||||||
| Ipt7528v2 | 1.3.6.1.4.1.8691.7.85 | ||||||||||||||||
identity The MIB module for Moxa PT-7528 series specific information. | |||||||||||||||||
| NmibNotificationsPrefix | 1.3.6.1.4.1.8691.7.85.0 | ||||||||||||||||
| !configChangeTrap | 1.3.6.1.4.1.8691.7.85.0.1 | ||||||||||||||||
| !power1Trap | 1.3.6.1.4.1.8691.7.85.0.2 | ||||||||||||||||
| !power2Trap | 1.3.6.1.4.1.8691.7.85.0.3 | ||||||||||||||||
| !trafficOverloadTrap | 1.3.6.1.4.1.8691.7.85.0.4 | ||||||||||||||||
notification · current The ethernet port's traffic loading exceeds the pre-defined value.
| |||||||||||||||||
| !redundancyTopologyChangedTrap | 1.3.6.1.4.1.8691.7.85.0.5 | ||||||||||||||||
notification · current The redundancy topology has been changed. | |||||||||||||||||
| !turboRingCouplingPortChangedTrap | 1.3.6.1.4.1.8691.7.85.0.6 | ||||||||||||||||
notification · current The coupling path of Turbo Ring has been changed. | |||||||||||||||||
| !turboRingMasterChangedTrap | 1.3.6.1.4.1.8691.7.85.0.7 | ||||||||||||||||
notification · current The master of Turbo Ring has been changed. | |||||||||||||||||
| !fiberWarningTrap | 1.3.6.1.4.1.8691.7.85.0.16 | ||||||||||||||||
notification · current Fiber warning information, including warning types and port. | |||||||||||||||||
| NswMgmt | 1.3.6.1.4.1.8691.7.85.1 | ||||||||||||||||
| SnumberOfPorts | 1.3.6.1.4.1.8691.7.85.1.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Total Ports. | |||||||||||||||||
| SswitchModel | 1.3.6.1.4.1.8691.7.85.1.2 | DisplayString | RO | PT-7528-TX | |||||||||||||
scalar · DisplayString · read-only · current The switch model. Example values from LibreNMS test devices
| |||||||||||||||||
| SfirmwareVersion | 1.3.6.1.4.1.8691.7.85.1.4 | DisplayString | RO | V4.0 build 17113010 | |||||||||||||
scalar · DisplayString · read-only · current The firmware version. Example values from LibreNMS test devices
| |||||||||||||||||
| SenableWebConfig | 1.3.6.1.4.1.8691.7.85.1.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the Web. configuration function.
| |||||||||||||||||
| SenableTelnetConsole | 1.3.6.1.4.1.8691.7.85.1.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable telnet console.
| |||||||||||||||||
| SlineSwapRecovery | 1.3.6.1.4.1.8691.7.85.1.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable line-swap-fast-recovery function.
| |||||||||||||||||
| NnetworkSetting | 1.3.6.1.4.1.8691.7.85.1.8 | ||||||||||||||||
| SswitchIpAddr | 1.3.6.1.4.1.8691.7.85.1.8.1 | IpAddress | RO | ||||||||||||||
scalar · IpAddress · read-only · current The IP Address of this switch. | |||||||||||||||||
| SswitchIpMask | 1.3.6.1.4.1.8691.7.85.1.8.2 | IpAddress | RO | ||||||||||||||
scalar · IpAddress · read-only · current The netmask of this switch. | |||||||||||||||||
| SdefaultGateway | 1.3.6.1.4.1.8691.7.85.1.8.3 | IpAddress | RO | ||||||||||||||
scalar · IpAddress · read-only · current The default gateway of this switch. | |||||||||||||||||
| SenableAutoIpConfig | 1.3.6.1.4.1.8691.7.85.1.8.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the automatic IP address configuration function.
| |||||||||||||||||
| SdnsServer1IpAddr | 1.3.6.1.4.1.8691.7.85.1.8.5 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The first DNS server's IP address | |||||||||||||||||
| SsnmpTrapCommunity | 1.3.6.1.4.1.8691.7.85.1.8.6 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The SNMP trap community name | |||||||||||||||||
| StrapServerAddr | 1.3.6.1.4.1.8691.7.85.1.8.7 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The IP address/Domain name of SNMP trap server | |||||||||||||||||
| SdnsServer2IpAddr | 1.3.6.1.4.1.8691.7.85.1.8.8 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The second DNS server's IP address | |||||||||||||||||
| SsnmpReadCommunity | 1.3.6.1.4.1.8691.7.85.1.8.9 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The SNMP read community name | |||||||||||||||||
| SsnmpTrap2Community | 1.3.6.1.4.1.8691.7.85.1.8.11 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The Second SNMP trap community name | |||||||||||||||||
| Strap2ServerAddr | 1.3.6.1.4.1.8691.7.85.1.8.12 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The IP address/Domain name of Second SNMP trap server | |||||||||||||||||
| SsnmpInformEnable | 1.3.6.1.4.1.8691.7.85.1.8.13 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the snmpInform function.
| |||||||||||||||||
| SsnmpInformRetries | 1.3.6.1.4.1.8691.7.85.1.8.14 | INTEGER (1..99) | RW | ||||||||||||||
scalar · INTEGER (1..99) · read-write · current The snmp inform retry times of SNMP trap server | |||||||||||||||||
| SsnmpInformTimeout | 1.3.6.1.4.1.8691.7.85.1.8.15 | INTEGER (1..300) | RW | ||||||||||||||
scalar · INTEGER (1..300) · read-write · current The snmp inform interval of SNMP trap server | |||||||||||||||||
| SdhcpRetryPeriods | 1.3.6.1.4.1.8691.7.85.1.8.16 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The DHCP retry periods. | |||||||||||||||||
| SdhcpRetryTimes | 1.3.6.1.4.1.8691.7.85.1.8.17 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The dhcp retry times. | |||||||||||||||||
| NportSetting | 1.3.6.1.4.1.8691.7.85.1.9 | ||||||||||||||||
| TportTable | 1.3.6.1.4.1.8691.7.85.1.9.1 | NA | |||||||||||||||
table · not-accessible · current The port table. | |||||||||||||||||
| RportEntry | 1.3.6.1.4.1.8691.7.85.1.9.1.1 | NA | |||||||||||||||
| CportIndex | 1.3.6.1.4.1.8691.7.85.1.9.1.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The port index. | |||||||||||||||||
| CportDesc | 1.3.6.1.4.1.8691.7.85.1.9.1.1.2 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The port description | |||||||||||||||||
| CportEnable | 1.3.6.1.4.1.8691.7.85.1.9.1.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable the port.
| |||||||||||||||||
| CportSpeed | 1.3.6.1.4.1.8691.7.85.1.9.1.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port speed and duplex.
| |||||||||||||||||
| CportMDI | 1.3.6.1.4.1.8691.7.85.1.9.1.1.5 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port MDI/MDIX.
| |||||||||||||||||
| CportFDXFlowCtrl | 1.3.6.1.4.1.8691.7.85.1.9.1.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port FDX Flow Control
| |||||||||||||||||
| CportName | 1.3.6.1.4.1.8691.7.85.1.9.1.1.7 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The port Name | |||||||||||||||||
| Nmonitor | 1.3.6.1.4.1.8691.7.85.1.10 | ||||||||||||||||
| Spower1InputStatus | 1.3.6.1.4.1.8691.7.85.1.10.1 | INTEGER | RO | present(1) | |||||||||||||
scalar · INTEGER · read-only · current The status of the first power input.
Example values from LibreNMS test devices
| |||||||||||||||||
| Spower2InputStatus | 1.3.6.1.4.1.8691.7.85.1.10.2 | INTEGER | RO | present(1) | |||||||||||||
scalar · INTEGER · read-only · current The status of the second power input.
Example values from LibreNMS test devices
| |||||||||||||||||
| TmonitorPortTable | 1.3.6.1.4.1.8691.7.85.1.10.3 | NA | |||||||||||||||
table · not-accessible · current The port table of monitor function. | |||||||||||||||||
| RmonitorPortEntry | 1.3.6.1.4.1.8691.7.85.1.10.3.1 | NA | |||||||||||||||
| CmonitorLinkStatus | 1.3.6.1.4.1.8691.7.85.1.10.3.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The port link status.
| |||||||||||||||||
| CmonitorSpeed | 1.3.6.1.4.1.8691.7.85.1.10.3.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The port speed and duplex status.
| |||||||||||||||||
| CmonitorAutoMDI | 1.3.6.1.4.1.8691.7.85.1.10.3.1.4 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The port MDI/MDIX status.
| |||||||||||||||||
| CmonitorTraffic | 1.3.6.1.4.1.8691.7.85.1.10.3.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The traffic loading percentage of port. | |||||||||||||||||
| CmonitorFDXFlowCtrl | 1.3.6.1.4.1.8691.7.85.1.10.3.1.6 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The Full-Duplex flow control status
| |||||||||||||||||
| CmonitorTxTraffic | 1.3.6.1.4.1.8691.7.85.1.10.3.1.7 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The TX traffic loading percentage of port. | |||||||||||||||||
| CmonitorRxTraffic | 1.3.6.1.4.1.8691.7.85.1.10.3.1.8 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The RTX traffic loading percentage of port. | |||||||||||||||||
| TmonitorFiberCheckTable | 1.3.6.1.4.1.8691.7.85.1.10.11 | NA | |||||||||||||||
table · not-accessible · current The Fiber Check table of monitor function. | |||||||||||||||||
| RmonitorFiberCheckEntry | 1.3.6.1.4.1.8691.7.85.1.10.11.1 | NA | |||||||||||||||
| CfiberPort | 1.3.6.1.4.1.8691.7.85.1.10.11.1.1 | DisplayString | RO | 25 | |||||||||||||
column · DisplayString · read-only · current The fiber index of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberModelName | 1.3.6.1.4.1.8691.7.85.1.10.11.1.2 | DisplayString | RO | SFP-1GLXLC-T | |||||||||||||
column · DisplayString · read-only · current The fiber ModelName of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberWaveLength | 1.3.6.1.4.1.8691.7.85.1.10.11.1.3 | DisplayString | RO | 1310 | |||||||||||||
column · DisplayString · read-only · current The fiber wavelength Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberVoltage | 1.3.6.1.4.1.8691.7.85.1.10.11.1.4 | DisplayString | RO | 3.4 | |||||||||||||
column · DisplayString · read-only · current The fiber Voltage of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberTemperature | 1.3.6.1.4.1.8691.7.85.1.10.11.1.5 | DisplayString | RO | 36.3 | |||||||||||||
column · DisplayString · read-only · current The fiber Temperature of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberTempWarn | 1.3.6.1.4.1.8691.7.85.1.10.11.1.6 | DisplayString | RO | [120.0] | |||||||||||||
column · DisplayString · read-only · current The Fiber Temperature warning value of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberTxPower | 1.3.6.1.4.1.8691.7.85.1.10.11.1.7 | DisplayString | RO | -6.3 | |||||||||||||
column · DisplayString · read-only · current The fiber TX power of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberTxPowerWarn | 1.3.6.1.4.1.8691.7.85.1.10.11.1.8 | DisplayString | RO | [0.0, -12.5] | |||||||||||||
column · DisplayString · read-only · current The fiber TX power warning value of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberRxPower | 1.3.6.1.4.1.8691.7.85.1.10.11.1.9 | DisplayString | RO | -5.8 | |||||||||||||
column · DisplayString · read-only · current The fiber RX power of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberRxPowerWarn | 1.3.6.1.4.1.8691.7.85.1.10.11.1.10 | DisplayString | RO | [-20.0] | |||||||||||||
column · DisplayString · read-only · current The Fiber RX power warning value of monitor function Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberTransciever | 1.3.6.1.4.1.8691.7.85.1.10.11.1.11 | DisplayString | RO | 1000BASE-LX | |||||||||||||
column · DisplayString · read-only · current The transciever information Example values from LibreNMS test devices
| |||||||||||||||||
| CfiberTxBiasCurrent | 1.3.6.1.4.1.8691.7.85.1.10.11.1.12 | DisplayString | RO | 10.1 | |||||||||||||
column · DisplayString · read-only · current The fiber Tx Bias Current Example values from LibreNMS test devices
| |||||||||||||||||
| NemailWarning | 1.3.6.1.4.1.8691.7.85.1.11 | ||||||||||||||||
| NemailService | 1.3.6.1.4.1.8691.7.85.1.11.1 | ||||||||||||||||
| SemailWarningMailServer | 1.3.6.1.4.1.8691.7.85.1.11.1.1 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The email server's Ip Address/Domain name of email warning function. | |||||||||||||||||
| SemailWarningFirstEmailAddr | 1.3.6.1.4.1.8691.7.85.1.11.1.2 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The first email address of email warning function. | |||||||||||||||||
| SemailWarningSecondEmailAddr | 1.3.6.1.4.1.8691.7.85.1.11.1.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The second email address of email warning function. | |||||||||||||||||
| SemailWarningThirdEmailAddr | 1.3.6.1.4.1.8691.7.85.1.11.1.4 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The third email address of email warning function. | |||||||||||||||||
| SemailWarningFourthEmailAddr | 1.3.6.1.4.1.8691.7.85.1.11.1.5 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The fourth email address of email warning function. | |||||||||||||||||
| SemailWarningSMTPPort | 1.3.6.1.4.1.8691.7.85.1.11.1.6 | INTEGER (1..65536) | RW | ||||||||||||||
scalar · INTEGER (1..65536) · read-write · current The email server's SMTP port of email warning function. | |||||||||||||||||
| NemailWarningEventType | 1.3.6.1.4.1.8691.7.85.1.11.2 | ||||||||||||||||
| SemailWarningEventServerColdStart | 1.3.6.1.4.1.8691.7.85.1.11.2.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The switch cold start event of email warning function.
| |||||||||||||||||
| SemailWarningEventServerWarmStart | 1.3.6.1.4.1.8691.7.85.1.11.2.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The switch warm start event of email warning function.
| |||||||||||||||||
| SemailWarningEventConfigChange | 1.3.6.1.4.1.8691.7.85.1.11.2.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The configuration changed event of email warning function.
| |||||||||||||||||
| SemailWarningEventPowerOn2Off | 1.3.6.1.4.1.8691.7.85.1.11.2.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The power on event of email warning function.
| |||||||||||||||||
| SemailWarningEventPowerOff2On | 1.3.6.1.4.1.8691.7.85.1.11.2.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The power off event of email warning function.
| |||||||||||||||||
| SemailWarningEventAuthFail | 1.3.6.1.4.1.8691.7.85.1.11.2.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The authentication fail event of email warning function.
| |||||||||||||||||
| SemailWarningEventTopologyChanged | 1.3.6.1.4.1.8691.7.85.1.11.2.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The communication redundancy topology changed event of email warning function.
| |||||||||||||||||
| SemailWarningEventFiberWarning | 1.3.6.1.4.1.8691.7.85.1.11.2.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Email warning for fiber status warning.
| |||||||||||||||||
| TemailWarningEventPortTable | 1.3.6.1.4.1.8691.7.85.1.11.3 | NA | |||||||||||||||
table · not-accessible · current The port table of the email warning event. | |||||||||||||||||
| RemailWarningEventPortEntry | 1.3.6.1.4.1.8691.7.85.1.11.3.1 | NA | |||||||||||||||
| CemailWarningEventPortLinkOn | 1.3.6.1.4.1.8691.7.85.1.11.3.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port link on event of email warning function.
| |||||||||||||||||
| CemailWarningEventPortLinkOff | 1.3.6.1.4.1.8691.7.85.1.11.3.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port link off event of email warning function.
| |||||||||||||||||
| CemailWarningEventPortTrafficOverload | 1.3.6.1.4.1.8691.7.85.1.11.3.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port's traffic overloading event of email warning function.
| |||||||||||||||||
| CemailWarningEventPortRxTrafficThreshold | 1.3.6.1.4.1.8691.7.85.1.11.3.1.5 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port's traffic threshold of the overloading event. | |||||||||||||||||
| CemailWarningEventPortTrafficDuration | 1.3.6.1.4.1.8691.7.85.1.11.3.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port's traffic duration of the overloading event. | |||||||||||||||||
| NsetDeviceIp | 1.3.6.1.4.1.8691.7.85.1.12 | ||||||||||||||||
| TsetDevIpTable | 1.3.6.1.4.1.8691.7.85.1.12.1 | NA | |||||||||||||||
table · not-accessible · current The set device IP table. | |||||||||||||||||
| RsetDevIpEntry | 1.3.6.1.4.1.8691.7.85.1.12.1.1 | NA | |||||||||||||||
| CsetDevIpIndex | 1.3.6.1.4.1.8691.7.85.1.12.1.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The set device IP index. | |||||||||||||||||
| CsetDevIpCurrentIpofDevice | 1.3.6.1.4.1.8691.7.85.1.12.1.1.2 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The current IP address of connected to this port. | |||||||||||||||||
| CsetDevIpPresentBy | 1.3.6.1.4.1.8691.7.85.1.12.1.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The protocol used that assigning IP to the device.
| |||||||||||||||||
| CsetDevIpDedicatedIp | 1.3.6.1.4.1.8691.7.85.1.12.1.1.4 | IpAddress | RW | ||||||||||||||
column · IpAddress · read-write · current The IP address when assign to the device connected to this port. | |||||||||||||||||
| Nmirroring | 1.3.6.1.4.1.8691.7.85.1.13 | ||||||||||||||||
| SmirroringPort | 1.3.6.1.4.1.8691.7.85.1.13.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The mirroring port of mirroring function. | |||||||||||||||||
| TmirrorTable | 1.3.6.1.4.1.8691.7.85.1.13.2 | NA | |||||||||||||||
table · not-accessible · current The mirroring table. | |||||||||||||||||
| RmirrorEntry | 1.3.6.1.4.1.8691.7.85.1.13.2.1 | NA | |||||||||||||||
| CmirrorIndex | 1.3.6.1.4.1.8691.7.85.1.13.2.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The mirroring index. | |||||||||||||||||
| CtargetPortEnable | 1.3.6.1.4.1.8691.7.85.1.13.2.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The enable of mirrored port.
| |||||||||||||||||
| CmonitorDirection | 1.3.6.1.4.1.8691.7.85.1.13.2.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The traffic direction of mirroring function.
| |||||||||||||||||
| NportTrunking | 1.3.6.1.4.1.8691.7.85.1.14 | ||||||||||||||||
| TtrunkSettingTable | 1.3.6.1.4.1.8691.7.85.1.14.1 | NA | |||||||||||||||
table · not-accessible · current Port Trunking Setting Table. | |||||||||||||||||
| RtrunkSettingEntry | 1.3.6.1.4.1.8691.7.85.1.14.1.1 | NA | |||||||||||||||
| CtrunkSettingIndex | 1.3.6.1.4.1.8691.7.85.1.14.1.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Trunking Group Index. | |||||||||||||||||
| CtrunkType | 1.3.6.1.4.1.8691.7.85.1.14.1.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Trunking Group Type.
| |||||||||||||||||
| CtrunkMemberPorts | 1.3.6.1.4.1.8691.7.85.1.14.1.1.3 | PortList | RW | ||||||||||||||
column · PortList · read-write · current Trunking Group Member Ports. | |||||||||||||||||
| TtrunkTable | 1.3.6.1.4.1.8691.7.85.1.14.2 | NA | |||||||||||||||
table · not-accessible · current Port Trunking Table. | |||||||||||||||||
| RtrunkEntry | 1.3.6.1.4.1.8691.7.85.1.14.2.1 | NA | |||||||||||||||
| CtrunkIndex | 1.3.6.1.4.1.8691.7.85.1.14.2.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Trunking Group Index. | |||||||||||||||||
| CtrunkPort | 1.3.6.1.4.1.8691.7.85.1.14.2.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Trunking Group Member Port. | |||||||||||||||||
| CtrunkStatus | 1.3.6.1.4.1.8691.7.85.1.14.2.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Trunking Port Status.
| |||||||||||||||||
| StrunkHashMode | 1.3.6.1.4.1.8691.7.85.1.14.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Trunking Group Hash Mode.
| |||||||||||||||||
| NcommRedundancy | 1.3.6.1.4.1.8691.7.85.1.16 | ||||||||||||||||
| SprotocolOfRedundancySetup | 1.3.6.1.4.1.8691.7.85.1.16.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This set the redundancy protocol of this switch.
| |||||||||||||||||
| NturboRing | 1.3.6.1.4.1.8691.7.85.1.16.2 | ||||||||||||||||
| SturboRingMaster | 1.3.6.1.4.1.8691.7.85.1.16.2.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Is this a Master or Slave.
| |||||||||||||||||
| SturboRingMasterSetup | 1.3.6.1.4.1.8691.7.85.1.16.2.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set this to be Master.
| |||||||||||||||||
| TturboRingPortTable | 1.3.6.1.4.1.8691.7.85.1.16.2.3 | NA | |||||||||||||||
table · not-accessible · current Turbo Ring Port Table. | |||||||||||||||||
| RturboRingPortEntry | 1.3.6.1.4.1.8691.7.85.1.16.2.3.1 | NA | |||||||||||||||
| CturboRingPortIndex | 1.3.6.1.4.1.8691.7.85.1.16.2.3.1.1 | INTEGER | RO | 27 | |||||||||||||
column · INTEGER · read-only · current Turbo Ring Port Index. Example values from LibreNMS test devices
| |||||||||||||||||
| CturboRingPortStatus | 1.3.6.1.4.1.8691.7.85.1.16.2.3.1.2 | INTEGER | RO | notTurboRingPort(1) | |||||||||||||
column · INTEGER · read-only · current Turbo Ring Port Status.
Example values from LibreNMS test devices
| |||||||||||||||||
| CturboRingPortDesignatedBridge | 1.3.6.1.4.1.8691.7.85.1.16.2.3.1.3 | MacAddress | RO | 00:90:e8:48:76:18 | |||||||||||||
column · MacAddress · read-only · current The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment. Example values from LibreNMS test devices
| |||||||||||||||||
| CturboRingPortDesignatedPort | 1.3.6.1.4.1.8691.7.85.1.16.2.3.1.4 | INTEGER | RO | 27 | |||||||||||||
column · INTEGER · read-only · current The Port Number of the port on the Designated Bridge for this port's segment. Example values from LibreNMS test devices
| |||||||||||||||||
| SturboRingDesignatedMaster | 1.3.6.1.4.1.8691.7.85.1.16.2.6 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current The MAC address of the bridge which is the Master of the TURBO RING. | |||||||||||||||||
| SturboRingRdntPort1 | 1.3.6.1.4.1.8691.7.85.1.16.2.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The port number of 1st Redundant Port on the TURBO RING. | |||||||||||||||||
| SturboRingRdntPort2 | 1.3.6.1.4.1.8691.7.85.1.16.2.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The port number of 2nd Redundant Port on the TURBO RING. | |||||||||||||||||
| SturboRingEnableCoupling | 1.3.6.1.4.1.8691.7.85.1.16.2.9 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the ring coupling function.
| |||||||||||||||||
| SturboRingCouplingPort | 1.3.6.1.4.1.8691.7.85.1.16.2.10 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The coupling port of ring coupling function. | |||||||||||||||||
| SturboRingCouplingPortStatus | 1.3.6.1.4.1.8691.7.85.1.16.2.11 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The coupling port status of ring coupling function.
| |||||||||||||||||
| SturboRingControlPort | 1.3.6.1.4.1.8691.7.85.1.16.2.12 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The control port of ring coupling function. | |||||||||||||||||
| SturboRingControlPortStatus | 1.3.6.1.4.1.8691.7.85.1.16.2.13 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The control port status of ring coupling function.
| |||||||||||||||||
| SturboRingBrokenStatus | 1.3.6.1.4.1.8691.7.85.1.16.2.14 | INTEGER | RO | na(0) | |||||||||||||
scalar · INTEGER · read-only · current Turbo Ring broken display.
Example values from LibreNMS test devices
| |||||||||||||||||
| NspanningTree | 1.3.6.1.4.1.8691.7.85.1.16.3 | ||||||||||||||||
| SspanningTreeRoot | 1.3.6.1.4.1.8691.7.85.1.16.3.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The root of spanning tree.
| |||||||||||||||||
| SspanningTreeBridgePriority | 1.3.6.1.4.1.8691.7.85.1.16.3.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The bridge priority of spanning tree protocol.
| |||||||||||||||||
| SspanningTreeHelloTime | 1.3.6.1.4.1.8691.7.85.1.16.3.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The hello time of spanning tree protocol. | |||||||||||||||||
| SspanningTreeMaxAge | 1.3.6.1.4.1.8691.7.85.1.16.3.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The max. age of spanning tree protocol. | |||||||||||||||||
| SspanningTreeForwardingDelay | 1.3.6.1.4.1.8691.7.85.1.16.3.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Tje forwarding delay of spanning tree protocol. | |||||||||||||||||
| TspanningTreeTable | 1.3.6.1.4.1.8691.7.85.1.16.3.6 | NA | |||||||||||||||
table · not-accessible · current The spanning tree table. | |||||||||||||||||
| RspanningTreeEntry | 1.3.6.1.4.1.8691.7.85.1.16.3.6.1 | NA | |||||||||||||||
| CspanningTreeIndex | 1.3.6.1.4.1.8691.7.85.1.16.3.6.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The index of spanning tree table. | |||||||||||||||||
| CenableSpanningTree | 1.3.6.1.4.1.8691.7.85.1.16.3.6.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable of spanning tree protocol for this port.
| |||||||||||||||||
| CspanningTreePortPriority | 1.3.6.1.4.1.8691.7.85.1.16.3.6.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port priority of spanning tree protocol.
| |||||||||||||||||
| CspanningTreePortCost | 1.3.6.1.4.1.8691.7.85.1.16.3.6.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The port cost of spanning tree protocol. | |||||||||||||||||
| CspanningTreePortStatus | 1.3.6.1.4.1.8691.7.85.1.16.3.6.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The port status of spanning tree protocol.
| |||||||||||||||||
| CspanningTreePortEdge | 1.3.6.1.4.1.8691.7.85.1.16.3.6.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This configures the Edge Port property for this port.
| |||||||||||||||||
| SactiveProtocolOfRedundancy | 1.3.6.1.4.1.8691.7.85.1.16.4 | INTEGER | RO | none(0) | |||||||||||||
scalar · INTEGER · read-only · current This shows the active redundancy protocol of this switch now. The none(0) status will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree.
Example values from LibreNMS test devices
| |||||||||||||||||
| NturboRingV2 | 1.3.6.1.4.1.8691.7.85.1.16.5 | ||||||||||||||||
| NturboRingV2Ring1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1 | ||||||||||||||||
| SringIndexRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.1 | INTEGER (1..2) | RO | ||||||||||||||
scalar · INTEGER (1..2) · read-only · current The turboRingV2 Ring Index. | |||||||||||||||||
| SringEnableRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.2 | INTEGER | RW | enable(1) | |||||||||||||
scalar · INTEGER · read-write · current The turboRingV2 Ring1 enable config.
Example values from LibreNMS test devices
| |||||||||||||||||
| SmasterSetupRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Is this a Master or Slave.
| |||||||||||||||||
| SmasterStatusRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.4 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Set this to be Master.
| |||||||||||||||||
| SdesignatedMasterRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.5 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current The MAC address of the bridge which is the Master of the turboRingV2. | |||||||||||||||||
| Srdnt1stPortRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The port number of 1st Redundant Port on the turboRingV2. | |||||||||||||||||
| Srdnt1stPortStatusRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.7 | INTEGER | RO | notRedundant(1) | |||||||||||||
scalar · INTEGER · read-only · current The status of 1st Redundant Port on the turboRingV2.
Example values from LibreNMS test devices
| |||||||||||||||||
| Srdnt2ndPortRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The port number of 2nd Redundant Port on the turboRingV2. | |||||||||||||||||
| Srdnt2ndPortStatusRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.9 | INTEGER | RO | notRedundant(1) | |||||||||||||
scalar · INTEGER · read-only · current The status of 2nd Redundant Port on the turboRingV2.
Example values from LibreNMS test devices
| |||||||||||||||||
| SbrokenStatusRing1 | 1.3.6.1.4.1.8691.7.85.1.16.5.1.10 | INTEGER | RO | na(0) | |||||||||||||
scalar · INTEGER · read-only · current turboRingV2 broken display.
Example values from LibreNMS test devices
| |||||||||||||||||
| NturboRingV2Ring2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2 | ||||||||||||||||
| SringIndexRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.1 | INTEGER (1..2) | RO | ||||||||||||||
scalar · INTEGER (1..2) · read-only · current The turboRingV2 Ring Index. | |||||||||||||||||
| SringEnableRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.2 | INTEGER | RW | disable(0) | |||||||||||||
scalar · INTEGER · read-write · current The turboRingV2 Ring2 enable config.
Example values from LibreNMS test devices
| |||||||||||||||||
| SmasterSetupRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Is this a Master or Slave.
| |||||||||||||||||
| SmasterStatusRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.4 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Set this to be Master.
| |||||||||||||||||
| SdesignatedMasterRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.5 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current The MAC address of the bridge which is the Master of the turboRingV2. | |||||||||||||||||
| Srdnt1stPortRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The port number of 1st Redundant Port on the turboRingV2. | |||||||||||||||||
| Srdnt1stPortStatusRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.7 | INTEGER | RO | notRedundant(1) | |||||||||||||
scalar · INTEGER · read-only · current The status of 1st Redundant Port on the turboRingV2.
Example values from LibreNMS test devices
| |||||||||||||||||
| Srdnt2ndPortRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The port number of 2nd Redundant Port on the turboRingV2. | |||||||||||||||||
| Srdnt2ndPortStatusRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.9 | INTEGER | RO | notRedundant(1) | |||||||||||||
scalar · INTEGER · read-only · current The status of 2nd Redundant Port on the turboRingV2.
Example values from LibreNMS test devices
| |||||||||||||||||
| SbrokenStatusRing2 | 1.3.6.1.4.1.8691.7.85.1.16.5.2.10 | INTEGER | RO | na(0) | |||||||||||||
scalar · INTEGER · read-only · current turboRingV2 broken display.
Example values from LibreNMS test devices
| |||||||||||||||||
| NturboRingV2Coupling | 1.3.6.1.4.1.8691.7.85.1.16.5.3 | ||||||||||||||||
| ScouplingEnable | 1.3.6.1.4.1.8691.7.85.1.16.5.3.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting the ring coupling enable.
| |||||||||||||||||
| ScouplingMode | 1.3.6.1.4.1.8691.7.85.1.16.5.3.2 | INTEGER | RW | dualHoming(1) | |||||||||||||
scalar · INTEGER · read-write · current Setting the ring coupling mode.
Example values from LibreNMS test devices
| |||||||||||||||||
| Scoupling1stPort | 1.3.6.1.4.1.8691.7.85.1.16.5.3.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current If in 'DUAL HOMING' mode, port name is 'Primary port'; if in 'COUPLING' mode, port name is 'Coupling port' | |||||||||||||||||
| Scoupling1stPortStatus | 1.3.6.1.4.1.8691.7.85.1.16.5.3.4 | INTEGER | RO | notRedundant(1) | |||||||||||||
scalar · INTEGER · read-only · current The 1st coupling port status of coupling function.
Example values from LibreNMS test devices
| |||||||||||||||||
| Scoupling2ndPort | 1.3.6.1.4.1.8691.7.85.1.16.5.3.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current If in 'DUAL HOMING' mode, port name is 'Backup port'; if in 'COUPLING' mode, port name is no used. | |||||||||||||||||
| Scoupling2ndPortStatus | 1.3.6.1.4.1.8691.7.85.1.16.5.3.6 | INTEGER | RO | notRedundant(1) | |||||||||||||
scalar · INTEGER · read-only · current The 2nd coupling port status of coupling function.
Example values from LibreNMS test devices
| |||||||||||||||||
| NturboChain | 1.3.6.1.4.1.8691.7.85.1.16.6 | ||||||||||||||||
| SturboChainRole | 1.3.6.1.4.1.8691.7.85.1.16.6.1 | INTEGER | RW | member(2) | |||||||||||||
scalar · INTEGER · read-write · current The Role of TURBO CHAIN.
Example values from LibreNMS test devices
| |||||||||||||||||
| SturboChainPort1 | 1.3.6.1.4.1.8691.7.85.1.16.6.2 | INTEGER | RW | 27 | |||||||||||||
scalar · INTEGER · read-write · current The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port. Example values from LibreNMS test devices
| |||||||||||||||||
| SturboChainPort2 | 1.3.6.1.4.1.8691.7.85.1.16.6.3 | INTEGER | RW | 28 | |||||||||||||
scalar · INTEGER · read-write · current The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain Example values from LibreNMS test devices
| |||||||||||||||||
| SturboChainPort1Status | 1.3.6.1.4.1.8691.7.85.1.16.6.4 | INTEGER | RO | notTurboChainPort(0) | |||||||||||||
scalar · INTEGER · read-only · current Turbo Chain Port Status.
Example values from LibreNMS test devices
| |||||||||||||||||
| SturboChainPort2Status | 1.3.6.1.4.1.8691.7.85.1.16.6.5 | INTEGER | RO | notTurboChainPort(0) | |||||||||||||
scalar · INTEGER · read-only · current Turbo Chain Port Status.
Example values from LibreNMS test devices
| |||||||||||||||||
| SturboChainPort1PartnerBridge | 1.3.6.1.4.1.8691.7.85.1.16.6.6 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current The MAC address of the next bridge | |||||||||||||||||
| SturboChainPort2PartnerBridge | 1.3.6.1.4.1.8691.7.85.1.16.6.7 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current The MAC address of the neighbor Turbo Chain switch | |||||||||||||||||
| NrelayWarning | 1.3.6.1.4.1.8691.7.85.1.17 | ||||||||||||||||
| TrelayWarningTable | 1.3.6.1.4.1.8691.7.85.1.17.11 | NA | |||||||||||||||
table · not-accessible · current The relay warning table. | |||||||||||||||||
| RrelayWarningEntry | 1.3.6.1.4.1.8691.7.85.1.17.11.1 | NA | |||||||||||||||
| CrelayAlarmIndex | 1.3.6.1.4.1.8691.7.85.1.17.11.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The Relay alarm index. | |||||||||||||||||
| CrelayWarningRelayContact | 1.3.6.1.4.1.8691.7.85.1.17.11.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The first Relay contact status.
| |||||||||||||||||
| CoverrideRelayWarningSetting | 1.3.6.1.4.1.8691.7.85.1.17.11.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Override the relay warning setting.
| |||||||||||||||||
| CrelayWarningPower1Off | 1.3.6.1.4.1.8691.7.85.1.17.11.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The relay contact will be opened while the first power input off.
| |||||||||||||||||
| CrelayWarningPower1OffStatus | 1.3.6.1.4.1.8691.7.85.1.17.11.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The relay contact is opened as the first power input off..
| |||||||||||||||||
| CrelayWarningPower2Off | 1.3.6.1.4.1.8691.7.85.1.17.11.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The relay contact will be opened while the second power input off.
| |||||||||||||||||
| CrelayWarningPower2OffStatus | 1.3.6.1.4.1.8691.7.85.1.17.11.1.7 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The relay contact is opened as the second power input off.
| |||||||||||||||||
| CrelayWarningTurboRingBreak | 1.3.6.1.4.1.8691.7.85.1.17.11.1.8 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The relay contact will be opened while turbo ring break.
| |||||||||||||||||
| CrelayWarningTurboRingBreakStatus | 1.3.6.1.4.1.8691.7.85.1.17.11.1.9 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The relay contact is opened while turbo ring is broken.
| |||||||||||||||||
| CrelayWarningFiberCheck | 1.3.6.1.4.1.8691.7.85.1.17.11.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The relay contact is opened while fiber status is warnned
| |||||||||||||||||
| CrelayWarningFiberCheckStatus | 1.3.6.1.4.1.8691.7.85.1.17.11.1.11 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The relay contact is opened while the fiber is abnormal.
| |||||||||||||||||
| TportRelayWarningTable | 1.3.6.1.4.1.8691.7.85.1.17.12 | NA | |||||||||||||||
table · not-accessible · current The relay warning port table. | |||||||||||||||||
| RportRelayWarningEntry | 1.3.6.1.4.1.8691.7.85.1.17.12.1 | NA | |||||||||||||||
| CrelayWarningLinkChanged | 1.3.6.1.4.1.8691.7.85.1.17.12.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The relay contact will be opened while this port's link status is changed.
| |||||||||||||||||
| CrelayWarningLinkChangedStatus | 1.3.6.1.4.1.8691.7.85.1.17.12.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The relay contact is opened as this port's link status is changed.
| |||||||||||||||||
| CrelayWarningTrafficOverload | 1.3.6.1.4.1.8691.7.85.1.17.12.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The relay contact will be opened while this port's traffic is overload.
| |||||||||||||||||
| CrelayWarningTrafficOverloadStatus | 1.3.6.1.4.1.8691.7.85.1.17.12.1.4 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The relay contact is opened as this port's traffic is overload.
| |||||||||||||||||
| CrelayWarningRxTrafficThreshold | 1.3.6.1.4.1.8691.7.85.1.17.12.1.5 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The threshold of the port traffic will be over loading. | |||||||||||||||||
| CrelayWarningTrafficDuration | 1.3.6.1.4.1.8691.7.85.1.17.12.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The duration of the port traffic will be over loading. | |||||||||||||||||
| NtrafficPrioritization | 1.3.6.1.4.1.8691.7.85.1.18 | ||||||||||||||||
| NqosClassification | 1.3.6.1.4.1.8691.7.85.1.18.1 | ||||||||||||||||
| SqueuingMechanism | 1.3.6.1.4.1.8691.7.85.1.18.1.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The queuing mechanism.
| |||||||||||||||||
| TqosPortTable | 1.3.6.1.4.1.8691.7.85.1.18.1.2 | NA | |||||||||||||||
table · not-accessible · current The QoS port table. | |||||||||||||||||
| RqosPortEntry | 1.3.6.1.4.1.8691.7.85.1.18.1.2.1 | NA | |||||||||||||||
| CinspectTos | 1.3.6.1.4.1.8691.7.85.1.18.1.2.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable the inspection of ToS field.
| |||||||||||||||||
| CinspectCos | 1.3.6.1.4.1.8691.7.85.1.18.1.2.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable the inspection of CoS field.
| |||||||||||||||||
| CportPriority | 1.3.6.1.4.1.8691.7.85.1.18.1.2.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The default priority of the port.
| |||||||||||||||||
| NcosMapping | 1.3.6.1.4.1.8691.7.85.1.18.2 | ||||||||||||||||
| TcosMappingTable | 1.3.6.1.4.1.8691.7.85.1.18.2.1 | NA | |||||||||||||||
table · not-accessible · current The COS mapping table. | |||||||||||||||||
| RcosMappingEntry | 1.3.6.1.4.1.8691.7.85.1.18.2.1.1 | NA | |||||||||||||||
| CcosTag | 1.3.6.1.4.1.8691.7.85.1.18.2.1.1.1 | INTEGER (0..7) | RO | ||||||||||||||
column · INTEGER (0..7) · read-only · current The cos tag of TOS field. | |||||||||||||||||
| CcosMappedPriority | 1.3.6.1.4.1.8691.7.85.1.18.2.1.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The frame's priority corresponding to it's COS tag value.
| |||||||||||||||||
| NtosMapping | 1.3.6.1.4.1.8691.7.85.1.18.3 | ||||||||||||||||
| TtosMappingTable | 1.3.6.1.4.1.8691.7.85.1.18.3.1 | NA | |||||||||||||||
table · not-accessible · current The TOS mapping table. | |||||||||||||||||
| RtosMappingEntry | 1.3.6.1.4.1.8691.7.85.1.18.3.1.1 | NA | |||||||||||||||
| CtosClass | 1.3.6.1.4.1.8691.7.85.1.18.3.1.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The TOS class of TOS field. | |||||||||||||||||
| CtosMappedPriority | 1.3.6.1.4.1.8691.7.85.1.18.3.1.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The frame's priority corresponding to it's TOS class value.
| |||||||||||||||||
| Niec61850Qos | 1.3.6.1.4.1.8691.7.85.1.18.4 | ||||||||||||||||
| Siec61850QosEnable | 1.3.6.1.4.1.8691.7.85.1.18.4.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable/disable IEC 61850 QoS.
| |||||||||||||||||
| Siec61850QosGoosePkt | 1.3.6.1.4.1.8691.7.85.1.18.4.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set the priority of GOOSE packet.
| |||||||||||||||||
| Siec61850QosSmvPkt | 1.3.6.1.4.1.8691.7.85.1.18.4.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set the priority of SMV packet.
| |||||||||||||||||
| Nvlan | 1.3.6.1.4.1.8691.7.85.1.19 | ||||||||||||||||
| TvlanPortSettingTable | 1.3.6.1.4.1.8691.7.85.1.19.1 | NA | |||||||||||||||
table · not-accessible · current The vlan setting table of ports. | |||||||||||||||||
| RvlanPortSettingEntry | 1.3.6.1.4.1.8691.7.85.1.19.1.1 | NA | |||||||||||||||
| CportVlanType | 1.3.6.1.4.1.8691.7.85.1.19.1.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The vlan type of port.
| |||||||||||||||||
| CportDefaultVid | 1.3.6.1.4.1.8691.7.85.1.19.1.1.2 | INTEGER (1..4094) | RW | ||||||||||||||
column · INTEGER (1..4094) · read-write · current The PVID of port. | |||||||||||||||||
| CportFixedVid | 1.3.6.1.4.1.8691.7.85.1.19.1.1.3 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The fixed vids of (trunk) port. | |||||||||||||||||
| CportForbiddenVid | 1.3.6.1.4.1.8691.7.85.1.19.1.1.4 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The forbidden vids of (trunk)port. | |||||||||||||||||
| CportFixedVidUntag | 1.3.6.1.4.1.8691.7.85.1.19.1.1.5 | DisplayString | RW | ||||||||||||||
column · DisplayString · read-write · current The fixed untag vids of (hybrid) port. | |||||||||||||||||
| TvlanTable | 1.3.6.1.4.1.8691.7.85.1.19.2 | NA | |||||||||||||||
table · not-accessible · current The VLAN table. | |||||||||||||||||
| RvlanEntry | 1.3.6.1.4.1.8691.7.85.1.19.2.1 | NA | |||||||||||||||
| CvlanId | 1.3.6.1.4.1.8691.7.85.1.19.2.1.1 | INTEGER (1..4094) | RO | ||||||||||||||
column · INTEGER (1..4094) · read-only · current The VLAN id. | |||||||||||||||||
| CjoinedAccessPorts | 1.3.6.1.4.1.8691.7.85.1.19.2.1.2 | PortList | RO | ||||||||||||||
column · PortList · read-only · current The access ports that joined this VID. | |||||||||||||||||
| CjoinedTrunkPorts | 1.3.6.1.4.1.8691.7.85.1.19.2.1.3 | PortList | RO | ||||||||||||||
column · PortList · read-only · current The trunk ports that joined this VID. | |||||||||||||||||
| CjoinedHybridPorts | 1.3.6.1.4.1.8691.7.85.1.19.2.1.4 | PortList | RO | ||||||||||||||
column · PortList · read-only · current The hybrid ports that joined this VID. | |||||||||||||||||
| SmanagementVlanId | 1.3.6.1.4.1.8691.7.85.1.19.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The management VLAN id. | |||||||||||||||||
| SvlanType | 1.3.6.1.4.1.8691.7.85.1.19.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current VLAN Type.
| |||||||||||||||||
| TportbaseVlanSettingTable | 1.3.6.1.4.1.8691.7.85.1.19.5 | NA | |||||||||||||||
table · not-accessible · current Port base Vlan Setting Table. | |||||||||||||||||
| RportbaseVlanSettingEntry | 1.3.6.1.4.1.8691.7.85.1.19.5.1 | NA | |||||||||||||||
| CportbaseVlanSettingIndex | 1.3.6.1.4.1.8691.7.85.1.19.5.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current port base Vlan Group Index. | |||||||||||||||||
| CportbaseVlanMemberPorts | 1.3.6.1.4.1.8691.7.85.1.19.5.1.2 | PortList | RW | ||||||||||||||
column · PortList · read-write · current port base Vlan Group Member Ports. | |||||||||||||||||
| SenableGvrp | 1.3.6.1.4.1.8691.7.85.1.19.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable GVRP.
| |||||||||||||||||
| NmulticastFiltering | 1.3.6.1.4.1.8691.7.85.1.20 | ||||||||||||||||
| NigmpSnooping | 1.3.6.1.4.1.8691.7.85.1.20.1 | ||||||||||||||||
| SquerierQueryInterval | 1.3.6.1.4.1.8691.7.85.1.20.1.1 | INTEGER (20..600) | RW | ||||||||||||||
scalar · INTEGER (20..600) · read-write · current This query interval of the querier function for this VLAN. | |||||||||||||||||
| TigmpSnoopingSettingTable | 1.3.6.1.4.1.8691.7.85.1.20.1.2 | NA | |||||||||||||||
table · not-accessible · current The IGMP snooping setting table. | |||||||||||||||||
| RigmpSnoopingSettingEntry | 1.3.6.1.4.1.8691.7.85.1.20.1.2.1 | NA | |||||||||||||||
| CenableIgmpSnooping | 1.3.6.1.4.1.8691.7.85.1.20.1.2.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable the IGMP snooping function in this VLAN.
| |||||||||||||||||
| CenableQuerier | 1.3.6.1.4.1.8691.7.85.1.20.1.2.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable the querier function for this VLAN.
| |||||||||||||||||
| CfixedMulticastQuerierPorts | 1.3.6.1.4.1.8691.7.85.1.20.1.2.1.3 | PortList | RW | ||||||||||||||
column · PortList · read-write · current The ports that multicast-Querier exist. | |||||||||||||||||
| ClearnedMulticastQuerierPorts | 1.3.6.1.4.1.8691.7.85.1.20.1.2.1.4 | PortList | RO | ||||||||||||||
column · PortList · read-only · current The ports that multicast-Querier exist. | |||||||||||||||||
| SenableGlobalIgmpSnooping | 1.3.6.1.4.1.8691.7.85.1.20.1.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the IGMP snooping function .
| |||||||||||||||||
| NstaticMulticast | 1.3.6.1.4.1.8691.7.85.1.20.2 | ||||||||||||||||
| TstaticMulticastTable | 1.3.6.1.4.1.8691.7.85.1.20.2.1 | NA | |||||||||||||||
table · not-accessible · current The static multicast table. | |||||||||||||||||
| RstaticMulticastEntry | 1.3.6.1.4.1.8691.7.85.1.20.2.1.1 | NA | |||||||||||||||
| CstaticMulticastAddress | 1.3.6.1.4.1.8691.7.85.1.20.2.1.1.1 | MacAddress | RC | ||||||||||||||
column · MacAddress · read-create · current The static multicast address. | |||||||||||||||||
| CstaticMulticastPorts | 1.3.6.1.4.1.8691.7.85.1.20.2.1.1.2 | PortList | RC | ||||||||||||||
column · PortList · read-create · current The port map of the static multicast address. | |||||||||||||||||
| CstaticMulticastStatus | 1.3.6.1.4.1.8691.7.85.1.20.2.1.1.3 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.
| |||||||||||||||||
| Ngmrp | 1.3.6.1.4.1.8691.7.85.1.20.3 | ||||||||||||||||
| TgmrpSettingTable | 1.3.6.1.4.1.8691.7.85.1.20.3.1 | NA | |||||||||||||||
table · not-accessible · current The GMRP setting table. | |||||||||||||||||
| RgmrpSettingEntry | 1.3.6.1.4.1.8691.7.85.1.20.3.1.1 | NA | |||||||||||||||
| CenableGMRP | 1.3.6.1.4.1.8691.7.85.1.20.3.1.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Enable/Disable GMRP.
| |||||||||||||||||
| TgmrpTable | 1.3.6.1.4.1.8691.7.85.1.20.3.2 | NA | |||||||||||||||
table · not-accessible · current The GMRP status table. | |||||||||||||||||
| RgmrpEntry | 1.3.6.1.4.1.8691.7.85.1.20.3.2.1 | NA | |||||||||||||||
| CgmrpMulticastGroup | 1.3.6.1.4.1.8691.7.85.1.20.3.2.1.1 | MacAddress | RO | ||||||||||||||
column · MacAddress · read-only · current GMRP multicast group. | |||||||||||||||||
| CgmrpFixedPorts | 1.3.6.1.4.1.8691.7.85.1.20.3.2.1.2 | PortList | RO | ||||||||||||||
column · PortList · read-only · current The ports that joined GMRP multicast group manually. | |||||||||||||||||
| CgmrpLearnedPorts | 1.3.6.1.4.1.8691.7.85.1.20.3.2.1.3 | PortList | RO | ||||||||||||||
column · PortList · read-only · current The ports that joined GMRP multicast group by GMRP learning. | |||||||||||||||||
| Nmfb | 1.3.6.1.4.1.8691.7.85.1.20.4 | ||||||||||||||||
| TmfbSettingTable | 1.3.6.1.4.1.8691.7.85.1.20.4.1 | NA | |||||||||||||||
table · not-accessible · current The Multicast Filtering Behavior setting table. | |||||||||||||||||
| RmfbSettingEntry | 1.3.6.1.4.1.8691.7.85.1.20.4.1.1 | NA | |||||||||||||||
| CfilterBehavior | 1.3.6.1.4.1.8691.7.85.1.20.4.1.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Port forward multicast packet behavior.
| |||||||||||||||||
| SmcastSrcPass | 1.3.6.1.4.1.8691.7.85.1.20.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Filter SA with multicast address.
| |||||||||||||||||
| NrateLimiting | 1.3.6.1.4.1.8691.7.85.1.21 | ||||||||||||||||
| TnormalModeRateLimitingTable | 1.3.6.1.4.1.8691.7.85.1.21.1 | NA | |||||||||||||||
table · not-accessible · current The rate limiting table. | |||||||||||||||||
| RnormalModeRateLimitingEntry | 1.3.6.1.4.1.8691.7.85.1.21.1.1 | NA | |||||||||||||||
| CingressLimitRate | 1.3.6.1.4.1.8691.7.85.1.21.1.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The ingress limit mode.
| |||||||||||||||||
| CegressLimit | 1.3.6.1.4.1.8691.7.85.1.21.1.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The ingress limit mode.
| |||||||||||||||||
| NbroadcastStormProtection | 1.3.6.1.4.1.8691.7.85.1.21.2 | ||||||||||||||||
| SenableBcastStormProtection | 1.3.6.1.4.1.8691.7.85.1.21.2.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable Broadcast Storm Protection
| |||||||||||||||||
| SbcastStormIncludeMcast | 1.3.6.1.4.1.8691.7.85.1.21.2.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Broadcast Storm Protection includes Multicast packets
| |||||||||||||||||
| SbcastStormIncludeUnkonwnMcastUcast | 1.3.6.1.4.1.8691.7.85.1.21.2.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Broadcast Storm Protection includes Unkonwn Multicast and Unknown Unicast Packet packets
| |||||||||||||||||
| NunicastFilterBehavior | 1.3.6.1.4.1.8691.7.85.1.21.2.4 | ||||||||||||||||
| SufbIncludeUnkonwnUcast | 1.3.6.1.4.1.8691.7.85.1.21.2.4.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Unicast Filter Behavior includes Unknown Unicast packets
| |||||||||||||||||
| SbcastStormProtectionRateLimit | 1.3.6.1.4.1.8691.7.85.1.21.2.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Broadcast Storm Protection rate limit
| |||||||||||||||||
| NportDisableMode | 1.3.6.1.4.1.8691.7.85.1.21.3 | ||||||||||||||||
| SportDisableModePeriod | 1.3.6.1.4.1.8691.7.85.1.21.3.1 | INTEGER (1..65535) | RW | ||||||||||||||
scalar · INTEGER (1..65535) · read-write · current Check time. | |||||||||||||||||
| TportDisableModeTable | 1.3.6.1.4.1.8691.7.85.1.21.3.2 | NA | |||||||||||||||
table · not-accessible · current The rate limiting table. | |||||||||||||||||
| RportDisableModeEntry | 1.3.6.1.4.1.8691.7.85.1.21.3.2.1 | NA | |||||||||||||||
| CingressLimit | 1.3.6.1.4.1.8691.7.85.1.21.3.2.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The ingress limit mode.
| |||||||||||||||||
| SrateLimitingMode | 1.3.6.1.4.1.8691.7.85.1.21.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The rate limiting mode.
| |||||||||||||||||
| Nsecurity | 1.3.6.1.4.1.8691.7.85.1.22 | ||||||||||||||||
| NuserLoginSetting | 1.3.6.1.4.1.8691.7.85.1.22.1 | ||||||||||||||||
| SuserLoginServer | 1.3.6.1.4.1.8691.7.85.1.22.1.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set user login server option.
| |||||||||||||||||
| NtacacsServerSetting | 1.3.6.1.4.1.8691.7.85.1.22.1.2 | ||||||||||||||||
| StacacsLoginAuthServer | 1.3.6.1.4.1.8691.7.85.1.22.1.2.1 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Tacacs+ Server IP Address/Domain name. | |||||||||||||||||
| StacacsLoginAuthPort | 1.3.6.1.4.1.8691.7.85.1.22.1.2.2 | INTEGER (1..65535) | RW | ||||||||||||||
scalar · INTEGER (1..65535) · read-write · current Set Tacacs+ Port. | |||||||||||||||||
| StacacsLoginAuthSharedKey | 1.3.6.1.4.1.8691.7.85.1.22.1.2.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Tacacs+ Shared Key. | |||||||||||||||||
| StacacsLoginAuthAuthType | 1.3.6.1.4.1.8691.7.85.1.22.1.2.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set Tacacs+ Shared Key.
| |||||||||||||||||
| StacacsLoginAuthTimeout | 1.3.6.1.4.1.8691.7.85.1.22.1.2.5 | INTEGER (1..255) | RW | ||||||||||||||
scalar · INTEGER (1..255) · read-write · current Set Tacacs+ Shared Key. | |||||||||||||||||
| NradiusServerSetting | 1.3.6.1.4.1.8691.7.85.1.22.1.3 | ||||||||||||||||
| SradiusLoginAuthServer | 1.3.6.1.4.1.8691.7.85.1.22.1.3.1 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Radius Server IP Address/Domain name. | |||||||||||||||||
| SradiusLoginAuthPort | 1.3.6.1.4.1.8691.7.85.1.22.1.3.2 | INTEGER (1..65535) | RW | ||||||||||||||
scalar · INTEGER (1..65535) · read-write · current Set Radius Port. | |||||||||||||||||
| SradiusLoginAuthSharedKey | 1.3.6.1.4.1.8691.7.85.1.22.1.3.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Radius Shared Key. | |||||||||||||||||
| SradiusLoginAuthAuthType | 1.3.6.1.4.1.8691.7.85.1.22.1.3.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set Radius Shared Key.
| |||||||||||||||||
| SradiusLoginAuthTimeout | 1.3.6.1.4.1.8691.7.85.1.22.1.3.5 | INTEGER (1..255) | RW | ||||||||||||||
scalar · INTEGER (1..255) · read-write · current Set Radius Shared Key. | |||||||||||||||||
| NportAccessControl | 1.3.6.1.4.1.8691.7.85.1.22.2 | ||||||||||||||||
| NstaticPortLock | 1.3.6.1.4.1.8691.7.85.1.22.2.1 | ||||||||||||||||
| SstaticPortLockAddress | 1.3.6.1.4.1.8691.7.85.1.22.2.1.1 | MacAddress | RC | ||||||||||||||
scalar · MacAddress · read-create · current The static port lock address. | |||||||||||||||||
| SstaticPortLockPort | 1.3.6.1.4.1.8691.7.85.1.22.2.1.2 | INTEGER | RC | ||||||||||||||
scalar · INTEGER · read-create · current The port of the static port lock address. | |||||||||||||||||
| SstaticPortLockStatus | 1.3.6.1.4.1.8691.7.85.1.22.2.1.3 | INTEGER | RC | ||||||||||||||
scalar · INTEGER · read-create · current The status is active to indicate normal. Use createAndGo to create new on multiple SET.
| |||||||||||||||||
| Ndot1x | 1.3.6.1.4.1.8691.7.85.1.22.2.2 | ||||||||||||||||
| SdataBaseOption | 1.3.6.1.4.1.8691.7.85.1.22.2.2.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set IEEE 802.1X database option.
| |||||||||||||||||
| Sdot1xReauthEnable | 1.3.6.1.4.1.8691.7.85.1.22.2.2.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable IEEE 802.1X Re-authentication.
| |||||||||||||||||
| Sdot1xReauthPeriod | 1.3.6.1.4.1.8691.7.85.1.22.2.2.6 | INTEGER (60..3600) | RW | ||||||||||||||
scalar · INTEGER (60..3600) · read-write · current Set IEEE 802.1X Re-authentication Period. | |||||||||||||||||
| Tdot1xSettingTable | 1.3.6.1.4.1.8691.7.85.1.22.2.2.7 | NA | |||||||||||||||
table · not-accessible · current IEEE 802.1X Port Setting Table. | |||||||||||||||||
| Rdot1xSettingEntry | 1.3.6.1.4.1.8691.7.85.1.22.2.2.7.1 | NA | |||||||||||||||
| CenableDot1X | 1.3.6.1.4.1.8691.7.85.1.22.2.2.7.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Enable/Disable IEEE 802.1X.
| |||||||||||||||||
| Tdot1xReauthTable | 1.3.6.1.4.1.8691.7.85.1.22.2.2.8 | NA | |||||||||||||||
table · not-accessible · current IEEE 802.1X Re-authentication Table. | |||||||||||||||||
| Rdot1xReauthEntry | 1.3.6.1.4.1.8691.7.85.1.22.2.2.8.1 | NA | |||||||||||||||
| Cdot1xReauthPortIndex | 1.3.6.1.4.1.8691.7.85.1.22.2.2.8.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current IEEE 802.1X Enabled Port Index. | |||||||||||||||||
| Cdot1xReauth | 1.3.6.1.4.1.8691.7.85.1.22.2.2.8.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Reauth IEEE 802.1X.
| |||||||||||||||||
| Ndot1xRadius | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9 | ||||||||||||||||
| Sdot1xSameAsAuthServer | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set Radius Server IP Address/Domain name.
| |||||||||||||||||
| Sdot1x1stRadiusServer | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9.2 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Radius Server IP Address/Domain name. | |||||||||||||||||
| Sdot1x1stRadiusPort | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9.3 | INTEGER (1..65535) | RW | ||||||||||||||
scalar · INTEGER (1..65535) · read-write · current Set Radius Port. | |||||||||||||||||
| Sdot1x1stRadiusSharedKey | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9.4 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Radius Shared Key. | |||||||||||||||||
| Sdot1x2ndRadiusServer | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9.5 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Radius Server IP Address/Domain name. | |||||||||||||||||
| Sdot1x2ndRadiusPort | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9.6 | INTEGER (1..65535) | RW | ||||||||||||||
scalar · INTEGER (1..65535) · read-write · current Set Radius Port. | |||||||||||||||||
| Sdot1x2ndRadiusSharedKey | 1.3.6.1.4.1.8691.7.85.1.22.2.2.9.7 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Set Radius Shared Key. | |||||||||||||||||
| TportAccessControlTable | 1.3.6.1.4.1.8691.7.85.1.22.2.3 | NA | |||||||||||||||
table · not-accessible · current The Port Access Control table. | |||||||||||||||||
| RportAccessControlEntry | 1.3.6.1.4.1.8691.7.85.1.22.2.3.1 | NA | |||||||||||||||
| CportAccessControlAddress | 1.3.6.1.4.1.8691.7.85.1.22.2.3.1.1 | MacAddress | RO | ||||||||||||||
column · MacAddress · read-only · current The MAC address which is static locked or IEEE 802.1X authorized. | |||||||||||||||||
| CportAccessControlPortNo | 1.3.6.1.4.1.8691.7.85.1.22.2.3.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The port number that the Port Access Control address resides. | |||||||||||||||||
| CportAccessControlAccessStatus | 1.3.6.1.4.1.8691.7.85.1.22.2.3.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The access status of the Port Access Control address.
| |||||||||||||||||
| CportAccessControlStatus | 1.3.6.1.4.1.8691.7.85.1.22.2.3.1.4 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.
| |||||||||||||||||
| NaccessibleIP | 1.3.6.1.4.1.8691.7.85.1.30 | ||||||||||||||||
| SenableAccessibleIP | 1.3.6.1.4.1.8691.7.85.1.30.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable the accessible IP address list.
| |||||||||||||||||
| TaccessibleIpTable | 1.3.6.1.4.1.8691.7.85.1.30.2 | NA | |||||||||||||||
table · not-accessible · current accessibleIP. | |||||||||||||||||
| RaccessibleIpEntry | 1.3.6.1.4.1.8691.7.85.1.30.2.1 | NA | |||||||||||||||
| CaccessibleIpAddress | 1.3.6.1.4.1.8691.7.85.1.30.2.1.1 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current Accessible IP address | |||||||||||||||||
| CaccessibleIpNetMask | 1.3.6.1.4.1.8691.7.85.1.30.2.1.2 | IpAddress | RC | ||||||||||||||
column · IpAddress · read-create · current Accessible IP netmask. | |||||||||||||||||
| CaccessibleIpStatus | 1.3.6.1.4.1.8691.7.85.1.30.2.1.3 | INTEGER | RC | ||||||||||||||
column · INTEGER · read-create · current The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.
| |||||||||||||||||
| NsysFileUpdate | 1.3.6.1.4.1.8691.7.85.1.31 | ||||||||||||||||
| StftpServer | 1.3.6.1.4.1.8691.7.85.1.31.1 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The TFTP Server name(IP Address) | |||||||||||||||||
| SfirmwarePathName | 1.3.6.1.4.1.8691.7.85.1.31.2 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The path name of firmware file in the TFTP Server | |||||||||||||||||
| SlogPathName | 1.3.6.1.4.1.8691.7.85.1.31.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The path name of log file in the TFTP Server | |||||||||||||||||
| SconfPathName | 1.3.6.1.4.1.8691.7.85.1.31.4 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The path name of configuration file in the TFTP Server | |||||||||||||||||
| StftpUpdate | 1.3.6.1.4.1.8691.7.85.1.31.5 | INTEGER | RC | ||||||||||||||
scalar · INTEGER · read-create · current
| |||||||||||||||||
| NtimeSetting | 1.3.6.1.4.1.8691.7.85.1.32 | ||||||||||||||||
| SsysDateTime | 1.3.6.1.4.1.8691.7.85.1.32.1 | DateAndTime | RW | ||||||||||||||
scalar · DateAndTime · read-write · current The date time of system | |||||||||||||||||
| ScalibratePeriod | 1.3.6.1.4.1.8691.7.85.1.32.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The period (seconds) that calibrate with time server | |||||||||||||||||
| StimeServer1 | 1.3.6.1.4.1.8691.7.85.1.32.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The first time server | |||||||||||||||||
| StimeServer2 | 1.3.6.1.4.1.8691.7.85.1.32.4 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The second time server | |||||||||||||||||
| NdaylightSaving | 1.3.6.1.4.1.8691.7.85.1.32.5 | ||||||||||||||||
| SstartMonth | 1.3.6.1.4.1.8691.7.85.1.32.5.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting Start Month of Daylight Saving time
| |||||||||||||||||
| SstartWeek | 1.3.6.1.4.1.8691.7.85.1.32.5.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting Start Week of Daylight Saving time
| |||||||||||||||||
| SstartDay | 1.3.6.1.4.1.8691.7.85.1.32.5.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting Start Day of Daylight Saving time
| |||||||||||||||||
| SstartHour | 1.3.6.1.4.1.8691.7.85.1.32.5.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting Start Hour of Daylight Saving time | |||||||||||||||||
| SendMonth | 1.3.6.1.4.1.8691.7.85.1.32.5.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting End Month of Daylight Saving time
| |||||||||||||||||
| SendWeek | 1.3.6.1.4.1.8691.7.85.1.32.5.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting End Week of Daylight Saving time
| |||||||||||||||||
| SendDay | 1.3.6.1.4.1.8691.7.85.1.32.5.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting End Day of Daylight Saving time
| |||||||||||||||||
| SendHour | 1.3.6.1.4.1.8691.7.85.1.32.5.8 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting End Hour of Daylight Saving time | |||||||||||||||||
| SoffsetHours | 1.3.6.1.4.1.8691.7.85.1.32.5.9 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Setting Offset Hours of Daylight Saving time | |||||||||||||||||
| SenableNTPServer | 1.3.6.1.4.1.8691.7.85.1.32.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable NTP Server.
| |||||||||||||||||
| StimeProtocolOption | 1.3.6.1.4.1.8691.7.85.1.32.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Time Protocol.
| |||||||||||||||||
| NbackupMediaSetting | 1.3.6.1.4.1.8691.7.85.1.35 | ||||||||||||||||
| SbackupMediaAutoLoad | 1.3.6.1.4.1.8691.7.85.1.35.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable Abc-01 backupMedia configuration PowerOn Auto Load functions
| |||||||||||||||||
| SenableWarmStart | 1.3.6.1.4.1.8691.7.85.1.36 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable to restart MOXA ethernet switch.
| |||||||||||||||||
| NsyslogSetting | 1.3.6.1.4.1.8691.7.85.1.37 | ||||||||||||||||
| SsyslogServer1 | 1.3.6.1.4.1.8691.7.85.1.37.1 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The syslog server 1 | |||||||||||||||||
| SsyslogServer1port | 1.3.6.1.4.1.8691.7.85.1.37.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The syslog server 1 port | |||||||||||||||||
| SsyslogServer2 | 1.3.6.1.4.1.8691.7.85.1.37.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The syslog server 2 | |||||||||||||||||
| SsyslogServer2port | 1.3.6.1.4.1.8691.7.85.1.37.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The syslog server 2 port | |||||||||||||||||
| SsyslogServer3 | 1.3.6.1.4.1.8691.7.85.1.37.5 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The syslog server 3 | |||||||||||||||||
| SsyslogServer3port | 1.3.6.1.4.1.8691.7.85.1.37.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The syslog server 3 port | |||||||||||||||||
| NdhcpRelayAgentSetting | 1.3.6.1.4.1.8691.7.85.1.39 | ||||||||||||||||
| SdhcpServer1 | 1.3.6.1.4.1.8691.7.85.1.39.1 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The dhcp Relay Agent Server 1. | |||||||||||||||||
| SdhcpServer2 | 1.3.6.1.4.1.8691.7.85.1.39.2 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The dhcp Relay Agent Server 2. | |||||||||||||||||
| SdhcpServer3 | 1.3.6.1.4.1.8691.7.85.1.39.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The dhcp Relay Agent Server 3. | |||||||||||||||||
| SdhcpServer4 | 1.3.6.1.4.1.8691.7.85.1.39.4 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current The dhcp Relay Agent Server 4. | |||||||||||||||||
| Noption82Setting | 1.3.6.1.4.1.8691.7.85.1.39.5 | ||||||||||||||||
| SenableOption82 | 1.3.6.1.4.1.8691.7.85.1.39.5.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Enable DHCP Option 82
| |||||||||||||||||
| Soption82Type | 1.3.6.1.4.1.8691.7.85.1.39.5.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Option 82 Type selector
| |||||||||||||||||
| Soption82Value | 1.3.6.1.4.1.8691.7.85.1.39.5.3 | DisplayString | RW | ||||||||||||||
scalar · DisplayString · read-write · current Option 82 Type Value | |||||||||||||||||
| Soption82ValueDisplay | 1.3.6.1.4.1.8691.7.85.1.39.5.4 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current Option 82 Type Value Display | |||||||||||||||||
| TdhcpFunctionTable | 1.3.6.1.4.1.8691.7.85.1.39.6 | NA | |||||||||||||||
table · not-accessible · current DHCP Function Table. | |||||||||||||||||
| RdhcpFunctionEntry | 1.3.6.1.4.1.8691.7.85.1.39.6.1 | NA | |||||||||||||||
| CdhcpPortIndex | 1.3.6.1.4.1.8691.7.85.1.39.6.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The DHCP Port Index. | |||||||||||||||||
| CcircuitID | 1.3.6.1.4.1.8691.7.85.1.39.6.1.2 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The Circuit ID. | |||||||||||||||||
| Coption82Enable | 1.3.6.1.4.1.8691.7.85.1.39.6.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable option 82 of the port.
| |||||||||||||||||
| Nieee1588Setting | 1.3.6.1.4.1.8691.7.85.1.41 | ||||||||||||||||
| Nptpv1Setting | 1.3.6.1.4.1.8691.7.85.1.41.1 | ||||||||||||||||
| SenablePtpv1 | 1.3.6.1.4.1.8691.7.85.1.41.1.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the PTP function.
| |||||||||||||||||
| SclockModev1 | 1.3.6.1.4.1.8691.7.85.1.41.1.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the clock mode of the PTP clock.
| |||||||||||||||||
| SsyncIntervalv1 | 1.3.6.1.4.1.8691.7.85.1.41.1.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the logSyncInterval of the PTP clock.
| |||||||||||||||||
| SsubDomainNamev1 | 1.3.6.1.4.1.8691.7.85.1.41.1.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The subdomain name of the PTP clock.
| |||||||||||||||||
| SpreferMasterv1 | 1.3.6.1.4.1.8691.7.85.1.41.1.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the PTP prefer master function.
| |||||||||||||||||
| Nptpv2Setting | 1.3.6.1.4.1.8691.7.85.1.41.2 | ||||||||||||||||
| SenablePtp | 1.3.6.1.4.1.8691.7.85.1.41.2.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the PTP function.
| |||||||||||||||||
| SclockMode | 1.3.6.1.4.1.8691.7.85.1.41.2.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the clock mode of the PTP clock.
| |||||||||||||||||
| Stransport | 1.3.6.1.4.1.8691.7.85.1.41.2.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the transport mode of the PTP clock.
| |||||||||||||||||
| SsyncInterval | 1.3.6.1.4.1.8691.7.85.1.41.2.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the logSyncInterval of the PTP clock.
| |||||||||||||||||
| SlogMinDelayReqInterval | 1.3.6.1.4.1.8691.7.85.1.41.2.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the logMinDelayReqInterval of the PTP clock.
| |||||||||||||||||
| SlogMinPdelayReqInterval | 1.3.6.1.4.1.8691.7.85.1.41.2.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the logMinPdelayReqInterval of the PTP clock.
| |||||||||||||||||
| SlogAnnounceInterval | 1.3.6.1.4.1.8691.7.85.1.41.2.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the logAnnounceInterval of the PTP clock.
| |||||||||||||||||
| SannounceReceiptTimeout | 1.3.6.1.4.1.8691.7.85.1.41.2.8 | INTEGER (2..10) | RW | ||||||||||||||
scalar · INTEGER (2..10) · read-write · current the announceReceiptTimeout of the PTP clock. | |||||||||||||||||
| Spriority1 | 1.3.6.1.4.1.8691.7.85.1.41.2.9 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the priority1 of the PTP clock. | |||||||||||||||||
| Spriority2 | 1.3.6.1.4.1.8691.7.85.1.41.2.10 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the priority2 of the PTP clock. | |||||||||||||||||
| SclockClass | 1.3.6.1.4.1.8691.7.85.1.41.2.11 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the clockClass of the PTP clock. | |||||||||||||||||
| SdomainNumber | 1.3.6.1.4.1.8691.7.85.1.41.2.12 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The domain number of the PTP clock.
| |||||||||||||||||
| SlocalUtcOffset | 1.3.6.1.4.1.8691.7.85.1.41.2.13 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the UTC offset of the local PTP clock. | |||||||||||||||||
| SlocalUtcOffsetValid | 1.3.6.1.4.1.8691.7.85.1.41.2.14 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the UTC offset valid of the local PTP clock.
| |||||||||||||||||
| SlocalLeap59 | 1.3.6.1.4.1.8691.7.85.1.41.2.15 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the leap59 of the local PTP clock.
| |||||||||||||||||
| SlocalLeap61 | 1.3.6.1.4.1.8691.7.85.1.41.2.16 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the leap61 of the local PTP clock.
| |||||||||||||||||
| SlocalPtpTimescale | 1.3.6.1.4.1.8691.7.85.1.41.2.17 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the timescale of the local PTP clock.
| |||||||||||||||||
| SlocalArbTime | 1.3.6.1.4.1.8691.7.85.1.41.2.18 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current the ARB time of the local PTP clock. | |||||||||||||||||
| Nptpv1Status | 1.3.6.1.4.1.8691.7.85.1.41.3 | ||||||||||||||||
| SoffsetToMasterv1 | 1.3.6.1.4.1.8691.7.85.1.41.3.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The offset to master for nsec. | |||||||||||||||||
| SmeanPathDelayv1 | 1.3.6.1.4.1.8691.7.85.1.41.3.2 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The mean path delay of the PTP clock. | |||||||||||||||||
| SgrandMasterUuidv1 | 1.3.6.1.4.1.8691.7.85.1.41.3.3 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current The grand master UUID address of the PTP clock. | |||||||||||||||||
| SparentUuidv1 | 1.3.6.1.4.1.8691.7.85.1.41.3.4 | MacAddress | RO | ||||||||||||||
scalar · MacAddress · read-only · current The parent master UUID address of the PTP clock. | |||||||||||||||||
| SclockStratumv1 | 1.3.6.1.4.1.8691.7.85.1.41.3.5 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The clock stratum of the PTP clock. | |||||||||||||||||
| SclockIdentifierv1 | 1.3.6.1.4.1.8691.7.85.1.41.3.6 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The clock identifier of the PTP clock. | |||||||||||||||||
| Nptpv2Status | 1.3.6.1.4.1.8691.7.85.1.41.4 | ||||||||||||||||
| SoffsetToMaster | 1.3.6.1.4.1.8691.7.85.1.41.4.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The offset to master for nsec. | |||||||||||||||||
| SmeanPathDelay | 1.3.6.1.4.1.8691.7.85.1.41.4.2 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The mean path delay of the PTP clock. | |||||||||||||||||
| SparentIdentity | 1.3.6.1.4.1.8691.7.85.1.41.4.3 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The parent identity of the PTP clock. | |||||||||||||||||
| SgrandmasterIdentity | 1.3.6.1.4.1.8691.7.85.1.41.4.4 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The grandmaster identity of the PTP clock. | |||||||||||||||||
| SgrandmasterClockClass | 1.3.6.1.4.1.8691.7.85.1.41.4.5 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The grandmaster clockClass of the PTP clock. | |||||||||||||||||
| SgrandmasterClockAccuracy | 1.3.6.1.4.1.8691.7.85.1.41.4.6 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The grandmaster clockAccuracy of the PTP clock. | |||||||||||||||||
| SgrandmasterPriority1 | 1.3.6.1.4.1.8691.7.85.1.41.4.7 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The grandmaster priority1 of the PTP clock. | |||||||||||||||||
| SgrandmasterPriority2 | 1.3.6.1.4.1.8691.7.85.1.41.4.8 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The grandmaster priority2 of the PTP clock. | |||||||||||||||||
| SstepsRemoved | 1.3.6.1.4.1.8691.7.85.1.41.4.9 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The steps removed of the PTP clock. | |||||||||||||||||
| ScurrentUtcOffset | 1.3.6.1.4.1.8691.7.85.1.41.4.10 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The current utc offset of the PTP clock. | |||||||||||||||||
| ScurrentUtcOffsetValid | 1.3.6.1.4.1.8691.7.85.1.41.4.11 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The current utc offset valid flag of the PTP clock. | |||||||||||||||||
| Sleap59 | 1.3.6.1.4.1.8691.7.85.1.41.4.12 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The leap59 of the PTP clock. | |||||||||||||||||
| Sleap61 | 1.3.6.1.4.1.8691.7.85.1.41.4.13 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The leap61 of the PTP clock. | |||||||||||||||||
| SptpTimescale | 1.3.6.1.4.1.8691.7.85.1.41.4.14 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The ptp timescale of the PTP clock. | |||||||||||||||||
| Stimesource | 1.3.6.1.4.1.8691.7.85.1.41.4.15 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The timesource of the PTP clock. | |||||||||||||||||
| TptpPortTable | 1.3.6.1.4.1.8691.7.85.1.41.5 | NA | |||||||||||||||
table · not-accessible · current The ptp port table. | |||||||||||||||||
| RptpPortEntry | 1.3.6.1.4.1.8691.7.85.1.41.5.1 | NA | |||||||||||||||
| CptpPortIndex | 1.3.6.1.4.1.8691.7.85.1.41.5.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The ptp port index. | |||||||||||||||||
| CptpPortEnable | 1.3.6.1.4.1.8691.7.85.1.41.5.1.2 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This enable the ptp port.
| |||||||||||||||||
| CptpPortStatus | 1.3.6.1.4.1.8691.7.85.1.41.5.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current This port status of the PTP clock.
| |||||||||||||||||
| Ndiagnosis | 1.3.6.1.4.1.8691.7.85.1.42 | ||||||||||||||||
| NlldpSetting | 1.3.6.1.4.1.8691.7.85.1.42.1 | ||||||||||||||||
| SenableLLDP | 1.3.6.1.4.1.8691.7.85.1.42.1.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the LLDP function.
| |||||||||||||||||
| SlldpMSGInterval | 1.3.6.1.4.1.8691.7.85.1.42.1.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The LLDP message transmit interval. | |||||||||||||||||
| SwebTimeout | 1.3.6.1.4.1.8691.7.85.1.43 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Web Timeout | |||||||||||||||||
| SageTime | 1.3.6.1.4.1.8691.7.85.1.44 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Web Timeout | |||||||||||||||||
| NgarpSetting | 1.3.6.1.4.1.8691.7.85.1.45 | ||||||||||||||||
| SjoinTime | 1.3.6.1.4.1.8691.7.85.1.45.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Join Time (ms). | |||||||||||||||||
| SleaveTime | 1.3.6.1.4.1.8691.7.85.1.45.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Leave Time (ms). | |||||||||||||||||
| SleaveAllTime | 1.3.6.1.4.1.8691.7.85.1.45.3 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Leaveall Time (ms). | |||||||||||||||||
| Neventlog | 1.3.6.1.4.1.8691.7.85.1.46 | ||||||||||||||||
| TeventlogTable | 1.3.6.1.4.1.8691.7.85.1.46.1 | NA | |||||||||||||||
table · not-accessible · current The table of eventlog. | |||||||||||||||||
| ReventlogEntry | 1.3.6.1.4.1.8691.7.85.1.46.1.1 | NA | |||||||||||||||
| CeventlogIndex | 1.3.6.1.4.1.8691.7.85.1.46.1.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The index of eventlog entry. | |||||||||||||||||
| CeventlogBootup | 1.3.6.1.4.1.8691.7.85.1.46.1.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current The reboot count of the system. | |||||||||||||||||
| CeventlogDate | 1.3.6.1.4.1.8691.7.85.1.46.1.1.3 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The date of the event occurred. | |||||||||||||||||
| CeventlogTime | 1.3.6.1.4.1.8691.7.85.1.46.1.1.4 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The time of the event occurred. | |||||||||||||||||
| CeventlogUptime | 1.3.6.1.4.1.8691.7.85.1.46.1.1.5 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The time of the event occurred after booting up. | |||||||||||||||||
| CeventlogEvent | 1.3.6.1.4.1.8691.7.85.1.46.1.1.6 | DisplayString | RO | ||||||||||||||
column · DisplayString · read-only · current The event which occurred in the system. | |||||||||||||||||
| SeventlogClear | 1.3.6.1.4.1.8691.7.85.1.46.2 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current To clear the eventlog, set value 1 to this field.
| |||||||||||||||||
| NindustrialProtocol | 1.3.6.1.4.1.8691.7.85.1.47 | ||||||||||||||||
| NeipSetting | 1.3.6.1.4.1.8691.7.85.1.47.1 | ||||||||||||||||
| SenableEtherNetIP | 1.3.6.1.4.1.8691.7.85.1.47.1.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the EtherNet/IP function.
| |||||||||||||||||
| NmodbusTCPSetting | 1.3.6.1.4.1.8691.7.85.1.47.2 | ||||||||||||||||
| SenableModbusTCP | 1.3.6.1.4.1.8691.7.85.1.47.2.1 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the Modbus TCP function.
| |||||||||||||||||
| TmmsDedicatedPortTable | 1.3.6.1.4.1.8691.7.85.1.47.4 | NA | |||||||||||||||
table · not-accessible · current MMS dedicated port setting. | |||||||||||||||||
| RmmsDedicatedPortEntry | 1.3.6.1.4.1.8691.7.85.1.47.4.1 | NA | |||||||||||||||
| CdedicatedPortEnable | 1.3.6.1.4.1.8691.7.85.1.47.4.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current MMS dedicated port enable
| |||||||||||||||||
| SenableFactoryDefault | 1.3.6.1.4.1.8691.7.85.1.48 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Reset all EtherDevice switch settings to factory default values
| |||||||||||||||||
| SjumboFrameEnable | 1.3.6.1.4.1.8691.7.85.1.49 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the jumbo frame.
| |||||||||||||||||
| SconsoleLoginMode | 1.3.6.1.4.1.8691.7.85.1.51 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This option can change console login mode.
| |||||||||||||||||
| ScpuLoading5s | 1.3.6.1.4.1.8691.7.85.1.53 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current CPU Loading for the past 5 seconds in %. | |||||||||||||||||
| ScpuLoading30s | 1.3.6.1.4.1.8691.7.85.1.54 | INTEGER | RO | 24 | |||||||||||||
scalar · INTEGER · read-only · current CPU Loading for the past 30 seconds in %. Example values from LibreNMS test devices
| |||||||||||||||||
| ScpuLoading300s | 1.3.6.1.4.1.8691.7.85.1.55 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current CPU Loading for the past 5 minutes in %. | |||||||||||||||||
| StotalMemory | 1.3.6.1.4.1.8691.7.85.1.56 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Total size of System RAM. | |||||||||||||||||
| SfreeMemory | 1.3.6.1.4.1.8691.7.85.1.57 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Total size of free dynamic memory | |||||||||||||||||
| SusedMemory | 1.3.6.1.4.1.8691.7.85.1.58 | INTEGER | RO | 29909976 | |||||||||||||
scalar · INTEGER · read-only · current Total size of used dynamic memory Example values from LibreNMS test devices
| |||||||||||||||||
| SmemoryUsage | 1.3.6.1.4.1.8691.7.85.1.59 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The usage of memory size in %. | |||||||||||||||||
| SloopProtection | 1.3.6.1.4.1.8691.7.85.1.61 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the Loop Protection function.
| |||||||||||||||||
| SenableLEDPanel | 1.3.6.1.4.1.8691.7.85.1.70 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current This enable the LED panel function.
| |||||||||||||||||
| NswTraps | 1.3.6.1.4.1.8691.7.85.2 | ||||||||||||||||
| SvarconfigChangeTrap | 1.3.6.1.4.1.8691.7.85.2.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The configuration has been changed.
| |||||||||||||||||
| Svarpower1Trap | 1.3.6.1.4.1.8691.7.85.2.2 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The power on/off changed.
| |||||||||||||||||
| Svarpower2Trap | 1.3.6.1.4.1.8691.7.85.2.3 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The power on/off changed.
| |||||||||||||||||
| SvartrafficOverloadTrap | 1.3.6.1.4.1.8691.7.85.2.4 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The ethernet port's traffic loading exceeds the pre-defined value. | |||||||||||||||||
| SvarredundancyTopologyChangedTrap | 1.3.6.1.4.1.8691.7.85.2.5 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The redundancy topology has been changed.
| |||||||||||||||||
| SvarturboRingCouplingPortChangedTrap | 1.3.6.1.4.1.8691.7.85.2.6 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The coupling path of Turbo Ring has been changed.
| |||||||||||||||||
| SvarturboRingMasterChangedTrap | 1.3.6.1.4.1.8691.7.85.2.7 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The master of Turbo Ring has been changed.
| |||||||||||||||||
| NvarFiberWarningTrap | 1.3.6.1.4.1.8691.7.85.2.28 | ||||||||||||||||
| SvarFiberWarningTypeTrap | 1.3.6.1.4.1.8691.7.85.2.28.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Fiber warning types.
| |||||||||||||||||
| SvarFiberWarningPortTrap | 1.3.6.1.4.1.8691.7.85.2.28.2 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Fiber warning port.
| |||||||||||||||||
Textual conventions
PortListOCTET STRINGEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Traps / Notifications
- configChangeTrap
1.3.6.1.4.1.8691.7.85.0.1 - fiberWarningTrap
1.3.6.1.4.1.8691.7.85.0.16 - power1Trap
1.3.6.1.4.1.8691.7.85.0.2 - power2Trap
1.3.6.1.4.1.8691.7.85.0.3 - redundancyTopologyChangedTrap
1.3.6.1.4.1.8691.7.85.0.5 - trafficOverloadTrap
1.3.6.1.4.1.8691.7.85.0.4 - turboRingCouplingPortChangedTrap
1.3.6.1.4.1.8691.7.85.0.6 - turboRingMasterChangedTrap
1.3.6.1.4.1.8691.7.85.0.7