MOXA-PORT-MIB
Moxa Technologies Co., Ltd.The MIB module defines Moxa port setting
snmptranslate -m MOXA-PORT-MIB -Tpsnmpwalk -v2c -c <community> -m MOXA-PORT-MIB <host> 1.3.6.1.4.1.8691.603.1.1Imports
| MOXA-SWITCHING-MIB | portInterface |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example |
|---|---|---|---|---|---|
| ImxPort | 1.3.6.1.4.1.8691.603.1.1 | ||||
identity The MIB module defines Moxa port setting | |||||
| NportConfiguration | 1.3.6.1.4.1.8691.603.1.1.1 | ||||
| TportConfigTable | 1.3.6.1.4.1.8691.603.1.1.1.1 | NA | |||
table · not-accessible · current A table to control the port specific parameters of the device like speed, duplex mode, etc. | |||||
| RportConfigEntry | 1.3.6.1.4.1.8691.603.1.1.1.1.1 | NA | |||
row · not-accessible · current An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
| |||||
| CportConfigIndex | 1.3.6.1.4.1.8691.603.1.1.1.1.1.1 | Integer32 (1..65535) | RO | ||
column · Integer32 (1..65535) · read-only · current Interface index of the port for which the configuration in this entry applies. | |||||
| CportConfigDescription | 1.3.6.1.4.1.8691.603.1.1.1.1.1.2 | DisplayString | RW | ||
column · DisplayString · read-write · current A textual string containing information about the interface | |||||
| CportConfigMode | 1.3.6.1.4.1.8691.603.1.1.1.1.1.3 | INTEGER | RW | ||
column · INTEGER · read-write · current Speficies the mode in which the speed and duplex modes of the interface is determined. If set as 'auto', the hardware senses speed and negotiates with the port on the other end of the link for data transfer operation as 'full-duplex' or 'half-duplex' and about flow contol. If set as 'nonegotiation', the configured values for interface speed and duplex mode will be effective.
| |||||
| CportConfigDuplex | 1.3.6.1.4.1.8691.603.1.1.1.1.1.4 | INTEGER | RW | ||
column · INTEGER · read-write · current Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'portConfigMode' is 'nonegotiation'. If the 'portConfigMode' is 'auto', it obtains the value from Hardware after negotiating with its peer
| |||||
| CportConfigSpeed | 1.3.6.1.4.1.8691.603.1.1.1.1.1.5 | INTEGER | RW | ||
column · INTEGER · read-write · current Configures interface speed. This object can be configured only if the 'portConfigMode' is 'nonegotiation'. If the 'portConfigMode' is 'auto', it obtains the value from Hardware after negotiating with its peer
| |||||
| CportConfigMdiOrMdixCap | 1.3.6.1.4.1.8691.603.1.1.1.1.1.6 | INTEGER | RW | ||
column · INTEGER · read-write · current Specifies the port should be in Auto-Mdix mode or Mdi/Mdix. Setting the value to `auto` enables the Auto MDIX in the port - portConfigIndex. This will be effective only when the speed of the particular port is auto negotiable. Setting the value to `mdi` disables the Auto MDIX in the port and the port will be in mdi mode. Setting the value to `mdix` disables the Auto MDIX in the port and the port will be in mdix mode.
| |||||
| SportConfigSystemLinkUpDelayEnable | 1.3.6.1.4.1.8691.603.1.1.1.2 | TruthValue | RW | ||
scalar · TruthValue · read-write · current This enables or disables Link Up Delay functionality in the System. 'true' indicates that, operational status of the link is suspended for a configured delay time 'portConfigLinkUpDelayTimer'. 'false' indicates that the operational status of the link is not delayed and indicated to the higher layers immediately. | |||||
| TportConfigLinkUpDelayTable | 1.3.6.1.4.1.8691.603.1.1.1.3 | NA | |||
table · not-accessible · current This table is to configure link up delay functionality. | |||||
| RportConfigLinkUpDelayEntry | 1.3.6.1.4.1.8691.603.1.1.1.3.1 | NA | |||
row · not-accessible · current An entry containing linkup delay management information to a particular interface. | |||||
| CportConfigLinkUpDelayIndex | 1.3.6.1.4.1.8691.603.1.1.1.3.1.1 | INTEGER | RO | ||
column · INTEGER · read-only · current The portConfig index is the same to IF-MIB ifIndex. | |||||
| CportConfigLinkUpDelayEnable | 1.3.6.1.4.1.8691.603.1.1.1.3.1.2 | TruthValue | RW | ||
column · TruthValue · read-write · current This enables or disables Link Up Delay functionality in this port. 'true' indicates that, operational status of the link is suspended for a configured delay time 'portLinkUpDelayTimer'. 'false' indicates that the operational status of the link is not delayed and indicated to the higher layers immediately. | |||||
| CportConfigLinkUpDelayTimer | 1.3.6.1.4.1.8691.603.1.1.1.3.1.3 | Unsigned32 (1..1000) | RW | ||
column · Unsigned32 (1..1000) · read-write · current This configures the delay timer for the link up enabled interface. It takes the timer value (in seconds) minimum value as 1 and maximum value as 1000.
| |||||
| NportStatus | 1.3.6.1.4.1.8691.603.1.1.2 | ||||
| TportStatTable | 1.3.6.1.4.1.8691.603.1.1.2.1 | NA | |||
table · not-accessible · current A table to control the port specific parameters of the device like speed, duplex mode, etc. | |||||
| RportStatEntry | 1.3.6.1.4.1.8691.603.1.1.2.1.1 | NA | |||
row · not-accessible · current An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
| |||||
| CportStatIndex | 1.3.6.1.4.1.8691.603.1.1.2.1.1.1 | Integer32 (1..65535) | RO | ||
column · Integer32 (1..65535) · read-only · current Interface index of the port for which the configuration in this entry applies. | |||||
| CportStatMediaType | 1.3.6.1.4.1.8691.603.1.1.2.1.1.2 | DisplayString | RO | ||
column · DisplayString · read-only · current The port's current media type, as defined by MOXA. | |||||
| CportStatState | 1.3.6.1.4.1.8691.603.1.1.2.1.1.3 | INTEGER | RO | forwarding(5) | |
column · INTEGER · read-only · current The port's current state, as defined by application of the redundant Protocols. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning, it will place that port into the broken(6) state. For ports that are disabled (see portStatMode), this object will have a value of disabled(1).
| |||||
| CportStatMdiOrMdixCap | 1.3.6.1.4.1.8691.603.1.1.2.1.1.4 | INTEGER | RO | ||
column · INTEGER · read-only · current The port's current mdi/mdix status. If the port medium is operating on fiber, the status shall return invalid(3). If the port is not valid, the status shall also return invalid(3).
| |||||
| CportStatFunction | 1.3.6.1.4.1.8691.603.1.1.2.1.1.5 | PortFuncMap | RO | ||
column · PortFuncMap · read-only · current This function is used by PoE and PTP. The return value is a bitmap in which bit(0) represents PoE and bit(1) represents PTP. | |||||
| TportStatLinkUpDelayTable | 1.3.6.1.4.1.8691.603.1.1.2.2 | NA | |||
table · not-accessible · current This table is to configure link up delay functionality. | |||||
| RportStatLinkUpDelayEntry | 1.3.6.1.4.1.8691.603.1.1.2.2.1 | NA | |||
row · not-accessible · current An entry containing linkup delay management information to a particular interface. | |||||
| CportStatLinkUpDelayIndex | 1.3.6.1.4.1.8691.603.1.1.2.2.1.1 | INTEGER | RO | ||
column · INTEGER · read-only · current The port index is the same to IF-MIB ifIndex. | |||||
| CportStatLinkUpDelayRemainingTime | 1.3.6.1.4.1.8691.603.1.1.2.2.1.2 | Unsigned32 | RO | ||
column · Unsigned32 · read-only · current This object is for displaying the pending time left for the link Operation Status to be made UP.
| |||||
Textual conventions
PortFuncMapBitspoe(0)ptp(1)Port function bitmap.