MOXA-POE-BT-MIB
Moxa Technologies Co., Ltd.The MIB module defines Moxa PoE
snmptranslate -m MOXA-POE-BT-MIB -Tpsnmpwalk -v2c -c <community> -m MOXA-POE-BT-MIB <host> 1.3.6.1.4.1.8691.608Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nmoxa | 1.3.6.1.4.1.8691 | ||||||||||||
| Ipoe | 1.3.6.1.4.1.8691.608 | ||||||||||||
identity The MIB module defines Moxa PoE | |||||||||||||
| NmxPoeBt | 1.3.6.1.4.1.8691.608.2 | ||||||||||||
| NpoeBtNotification | 1.3.6.1.4.1.8691.608.2.0 | ||||||||||||
| !poeBtNotifyPdPowerOn | 1.3.6.1.4.1.8691.608.2.0.1 | ||||||||||||
| !poeBtNotifyPdPowerOff | 1.3.6.1.4.1.8691.608.2.0.2 | ||||||||||||
| !poeBtNotifyLowInputVoltage | 1.3.6.1.4.1.8691.608.2.0.3 | ||||||||||||
notification · current Notification indicates input voltage is lower than 46 V. | |||||||||||||
| !poeBtNotifyPdOverCurrent | 1.3.6.1.4.1.8691.608.2.0.4 | ||||||||||||
notification · current Notification indicates current is over power mode limitation.
| |||||||||||||
| !poeBtNotifyPdNoResponse | 1.3.6.1.4.1.8691.608.2.0.5 | ||||||||||||
notification · current Notification indicates check IP does not response to PD Failure Check.
| |||||||||||||
| !poeBtNotifyOverBudgetLimit | 1.3.6.1.4.1.8691.608.2.0.6 | ||||||||||||
notification · current Notification indicates power consumption is over budget. | |||||||||||||
| !poeBtNotifyPdDetectionFailure | 1.3.6.1.4.1.8691.608.2.0.7 | ||||||||||||
notification · current Notification indicates PD detection fail due to invalid signature. | |||||||||||||
| !poeBtNotifyNonPdOrPdShortCircuit | 1.3.6.1.4.1.8691.608.2.0.8 | ||||||||||||
| NpoeBtConfiguration | 1.3.6.1.4.1.8691.608.2.1 | ||||||||||||
| NpoeBtConfigGeneral | 1.3.6.1.4.1.8691.608.2.1.1 | ||||||||||||
| SpoeBtConfigPowerOutput | 1.3.6.1.4.1.8691.608.2.1.1.1 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Users configure power output to control PoE power output on or off. | |||||||||||||
| SpoeBtConfigAutoPowerCutting | 1.3.6.1.4.1.8691.608.2.1.1.2 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Users enable Auto Power Cutting make the lowest and the less port number port be cut if consumption over system budget | |||||||||||||
| SpoeBtConfigSystemPowerBudget | 1.3.6.1.4.1.8691.608.2.1.1.3 | Integer32 (30..300) | RW | ||||||||||
scalar · Integer32 (30..300) · read-write · current Users configure system power budget to limit maximun available power for all PoE devices. Please refer to EPS abilities to configure this value. | |||||||||||||
| TpoeBtConfigPortTable | 1.3.6.1.4.1.8691.608.2.1.1.4 | NA | |||||||||||
table · not-accessible · current A table contains general port configuration infomations. | |||||||||||||
| RpoeBtConfigPortEntry | 1.3.6.1.4.1.8691.608.2.1.1.4.1 | NA | |||||||||||
row · not-accessible · current A table entry contains general port configuration infomations.
| |||||||||||||
| CpoeBtConfigPortIndex | 1.3.6.1.4.1.8691.608.2.1.1.4.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Index of poeBtConfigPortTable. | |||||||||||||
| CpoeBtConfigPortPowerOutput | 1.3.6.1.4.1.8691.608.2.1.1.4.1.2 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Users configure port power output to control PoE power output on or off per ports. | |||||||||||||
| CpoeBtConfigOutputMode | 1.3.6.1.4.1.8691.608.2.1.1.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Users configure output mode according to the type of PoE devices.
| |||||||||||||
| CpoeBtConfigPowerAllocation | 1.3.6.1.4.1.8691.608.2.1.1.4.1.4 | Integer32 (0..90) | RW | ||||||||||
column · Integer32 (0..90) · read-write · current Users configure power allocation to set power output limit per ports. | |||||||||||||
| CpoeBtConfigLegacyPdDetection | 1.3.6.1.4.1.8691.608.2.1.1.4.1.5 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enable Legacy PD Detection to loose PoE detection signature. | |||||||||||||
| CpoeBtConfigPriority | 1.3.6.1.4.1.8691.608.2.1.1.4.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Users configure priority to change Auto Cutting priority of ports
| |||||||||||||
| SpoeBtConfigPowerManagementMode | 1.3.6.1.4.1.8691.608.2.1.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Users configure power management mode according to power usage of powered devices.
| |||||||||||||
| NpoeBtConfigFailureCheck | 1.3.6.1.4.1.8691.608.2.1.2 | ||||||||||||
| TpoeBtConfigFcPortTable | 1.3.6.1.4.1.8691.608.2.1.2.1 | NA | |||||||||||
table · not-accessible · current A table contains PD Failure Check port configuration infomations. | |||||||||||||
| RpoeBtConfigFcPortEntry | 1.3.6.1.4.1.8691.608.2.1.2.1.1 | NA | |||||||||||
row · not-accessible · current A table entry contains PD Failure Check port configuration infomations. | |||||||||||||
| CpoeBtConfigFcPortIndex | 1.3.6.1.4.1.8691.608.2.1.2.1.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Index of poeBtConfigFcPortTable. | |||||||||||||
| CpoeBtConfigFcEnable | 1.3.6.1.4.1.8691.608.2.1.2.1.1.2 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Users configure PD Failure Check enabled to enable PD Failure Check on the port. | |||||||||||||
| CpoeBtConfigFcDeviceIp | 1.3.6.1.4.1.8691.608.2.1.2.1.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Users configure check IP for PD Failure Check to check the IP periodically. | |||||||||||||
| CpoeBtConfigFcNoResponseTimes | 1.3.6.1.4.1.8691.608.2.1.2.1.1.4 | Integer32 (1..10) | RW | ||||||||||
column · Integer32 (1..10) · read-write · current Users configure no response timeout to set action trigger threshold. | |||||||||||||
| CpoeBtConfigFcCheckFrequency | 1.3.6.1.4.1.8691.608.2.1.2.1.1.5 | Integer32 (5..300) | RW | ||||||||||
column · Integer32 (5..300) · read-write · current Users configure check period to change IP check interval. | |||||||||||||
| CpoeBtConfigFcAction | 1.3.6.1.4.1.8691.608.2.1.2.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Users configure action to set trigger action if fail times hits threshold
| |||||||||||||
| NpoeBtConfigScheduling | 1.3.6.1.4.1.8691.608.2.1.3 | ||||||||||||
| TpoeBtConfigScheRuleTable | 1.3.6.1.4.1.8691.608.2.1.3.1 | NA | |||||||||||
table · not-accessible · current A table contains Scheduling rule configuration infomations. | |||||||||||||
| RpoeBtConfigScheRuleEntry | 1.3.6.1.4.1.8691.608.2.1.3.1.1 | NA | |||||||||||
row · not-accessible · current A table entry contains Scheduling rule configuration infomations.
| |||||||||||||
| CpoeBtConfigRuleIndex | 1.3.6.1.4.1.8691.608.2.1.3.1.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Index of poeBtConfigScheRuleTable. | |||||||||||||
| CpoeBtConfigScheName | 1.3.6.1.4.1.8691.608.2.1.3.1.1.2 | DisplayString (SIZE (0..63)) | RC | ||||||||||
column · DisplayString (SIZE (0..63)) · read-create · current Rule name | |||||||||||||
| CpoeBtConfigScheEnable | 1.3.6.1.4.1.8691.608.2.1.3.1.1.3 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current Users enable rule to make the rule valid. | |||||||||||||
| CpoeBtConfigScheStartDateYear | 1.3.6.1.4.1.8691.608.2.1.3.1.1.4 | Integer32 (1970..2038) | RC | ||||||||||
column · Integer32 (1970..2038) · read-create · current Users configure year of rule start date. | |||||||||||||
| CpoeBtConfigScheStartDateMonth | 1.3.6.1.4.1.8691.608.2.1.3.1.1.5 | Integer32 (1..12) | RC | ||||||||||
column · Integer32 (1..12) · read-create · current Users configure month of rule start date. | |||||||||||||
| CpoeBtConfigScheStartDateDay | 1.3.6.1.4.1.8691.608.2.1.3.1.1.6 | Integer32 (1..31) | RC | ||||||||||
column · Integer32 (1..31) · read-create · current Users configure day of rule state date. | |||||||||||||
| CpoeBtConfigScheStartTimeHour | 1.3.6.1.4.1.8691.608.2.1.3.1.1.7 | Integer32 (0..24) | RC | ||||||||||
column · Integer32 (0..24) · read-create · current Users configure hour of rule start time. | |||||||||||||
| CpoeBtConfigScheStartTimeMin | 1.3.6.1.4.1.8691.608.2.1.3.1.1.8 | Integer32 (0..59) | RC | ||||||||||
column · Integer32 (0..59) · read-create · current Users configure minute of rule start time. | |||||||||||||
| CpoeBtConfigScheEndTimeHour | 1.3.6.1.4.1.8691.608.2.1.3.1.1.9 | Integer32 (0..24) | RC | ||||||||||
column · Integer32 (0..24) · read-create · current Users configure hour of rule end time. | |||||||||||||
| CpoeBtConfigScheEndTimeMin | 1.3.6.1.4.1.8691.608.2.1.3.1.1.10 | Integer32 (0..59) | RC | ||||||||||
column · Integer32 (0..59) · read-create · current Users configure minute of rule end time. | |||||||||||||
| CpoeBtConfigScheRepeatOn | 1.3.6.1.4.1.8691.608.2.1.3.1.1.11 | OCTET STRING | RC | ||||||||||
column · OCTET STRING · read-create · current Users configure the rule repeat on which days. | |||||||||||||
| CpoeBtConfigScheAppliedPorts | 1.3.6.1.4.1.8691.608.2.1.3.1.1.12 | OCTET STRING | RC | ||||||||||
column · OCTET STRING · read-create · current Users configure the rule also applied on which ports. | |||||||||||||
| CpoeBtConfigScheRowStatus | 1.3.6.1.4.1.8691.608.2.1.3.1.1.13 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status column used for creating, modifying, and deleting entries of poeBtConfigScheRuleTable | |||||||||||||
| NpoeBtStatus | 1.3.6.1.4.1.8691.608.2.2 | ||||||||||||
| NpoeBtStatMonitor | 1.3.6.1.4.1.8691.608.2.2.1 | ||||||||||||
| SpoeBtStatMaxInputPower | 1.3.6.1.4.1.8691.608.2.2.1.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PoE total input power. | |||||||||||||
| SpoeBtStatActualPower | 1.3.6.1.4.1.8691.608.2.2.1.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PoE actual input power from power supply. | |||||||||||||
| SpoeBtStatBudgetLimit | 1.3.6.1.4.1.8691.608.2.2.1.3 | Integer32 | RO | 150 | |||||||||
scalar · Integer32 · read-only · current PoE power budget. Example values from LibreNMS test devices
| |||||||||||||
| SpoeBtStatConsumedPower | 1.3.6.1.4.1.8691.608.2.2.1.4 | Integer32 | RO | 0 | |||||||||
scalar · Integer32 · read-only · current PoE current total consumption. Example values from LibreNMS test devices
| |||||||||||||
| SpoeBtStatRemainingAvailablePower | 1.3.6.1.4.1.8691.608.2.2.1.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current PoE remaining power. | |||||||||||||
| TpoeBtStatPortTable | 1.3.6.1.4.1.8691.608.2.2.1.6 | NA | |||||||||||
table · not-accessible · current A table contains port status infomations. | |||||||||||||
| RpoeBtStatPortEntry | 1.3.6.1.4.1.8691.608.2.2.1.6.1 | NA | |||||||||||
row · not-accessible · current A table entry contains port status infomations.
| |||||||||||||
| CpoeBtStatPortIndex | 1.3.6.1.4.1.8691.608.2.2.1.6.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Port index. | |||||||||||||
| CpoeBtStatPowerOutput | 1.3.6.1.4.1.8691.608.2.2.1.6.1.2 | TruthValue | RO | 1 | |||||||||
| CpoeBtStatClassification | 1.3.6.1.4.1.8691.608.2.2.1.6.1.3 | OCTET STRING | RO | 55:6e:6b:6e:6f:77:6e:00:00:00:00:00:00:00:00:00… | |||||||||
column · OCTET STRING · read-only · current PD classification of the port. class0(0), class1(1), class2(2), class3(3), class4(4), class5(5), class6(6), class7(7), class8(8), unknown(10), overCurrent(11) Example values from LibreNMS test devices
| |||||||||||||
| CpoeBtStatCurrent | 1.3.6.1.4.1.8691.608.2.2.1.6.1.4 | DisplayString | RO | 5.12 | |||||||||
| CpoeBtStatVoltage | 1.3.6.1.4.1.8691.608.2.2.1.6.1.5 | DisplayString | RO | 41.20 | |||||||||
| CpoeBtStatConsumption | 1.3.6.1.4.1.8691.608.2.2.1.6.1.6 | DisplayString | RO | 10.00 | |||||||||
| CpoeBtStatDeviceType | 1.3.6.1.4.1.8691.608.2.2.1.6.1.7 | INTEGER | RO | dot3af(2) | |||||||||
column · INTEGER · read-only · current PD device type of the port.
| |||||||||||||
| CpoeBtStatConfigSuggestion | 1.3.6.1.4.1.8691.608.2.2.1.6.1.8 | INTEGER | RO | noSuggestion(0) | |||||||||
column · INTEGER · read-only · current Configuration suggestion of the port.
| |||||||||||||
| CpoeBtStatPdFailureCheckStatus | 1.3.6.1.4.1.8691.608.2.2.1.6.1.9 | INTEGER | RO | alive(1) | |||||||||
| SpoeBtStatAllocatedPower | 1.3.6.1.4.1.8691.608.2.2.1.7 | INTEGER | RO | 131 | |||||||||
scalar · INTEGER · read-only · current PoE current total budget. Example values from LibreNMS test devices
| |||||||||||||
Traps / Notifications
- poeBtNotifyLowInputVoltage
1.3.6.1.4.1.8691.608.2.0.3 - poeBtNotifyNonPdOrPdShortCircuit
1.3.6.1.4.1.8691.608.2.0.8 - poeBtNotifyOverBudgetLimit
1.3.6.1.4.1.8691.608.2.0.6 - poeBtNotifyPdDetectionFailure
1.3.6.1.4.1.8691.608.2.0.7 - poeBtNotifyPdNoResponse
1.3.6.1.4.1.8691.608.2.0.5 - poeBtNotifyPdOverCurrent
1.3.6.1.4.1.8691.608.2.0.4 - poeBtNotifyPdPowerOff
1.3.6.1.4.1.8691.608.2.0.2 - poeBtNotifyPdPowerOn
1.3.6.1.4.1.8691.608.2.0.1