MNI-PROTEUS-AMT-MIB
Microwave Networks Incorporatedsnmptranslate -m MNI-PROTEUS-AMT-MIB -Tpsnmpwalk -v2c -c <community> -m MNI-PROTEUS-AMT-MIB <host> 1.3.6.1.4.1.3323Imports
| RFC1155-SMI | Counter32 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nmicrowave-networks | 1.3.6.1.4.1.3323 | ||||||||||||
| NmnRegistrations | 1.3.6.1.4.1.3323.11 | ||||||||||||
| NmnRegSysObjID | 1.3.6.1.4.1.3323.11.1 | ||||||||||||
| NmnRegSysProtAMT | 1.3.6.1.4.1.3323.11.1.1 | ||||||||||||
| !mnPrNotificationMajorAlarmSet | 1.3.6.1.4.1.3323.11.1.1.0.1 | ||||||||||||
notification A major level Alarm was set (see varbinds for details). | |||||||||||||
| !mnPrNotificationAlarmClear | 1.3.6.1.4.1.3323.11.1.1.0.2 | ||||||||||||
notification An Alarm was cleared (see varbinds for details). | |||||||||||||
| !mnPrNotificationMinorAlarmSet | 1.3.6.1.4.1.3323.11.1.1.0.3 | ||||||||||||
notification A minor level Alarm was set (see varbinds for details). | |||||||||||||
| !mnPrNotificationInfoAlarmSet | 1.3.6.1.4.1.3323.11.1.1.0.4 | ||||||||||||
notification An informational Alarm was set (see varbinds for details). | |||||||||||||
| NmnRegSysProtAMTL | 1.3.6.1.4.1.3323.11.1.2 | ||||||||||||
| NmnRegSysProtAMTM | 1.3.6.1.4.1.3323.11.1.3 | ||||||||||||
| NmnRegSysProtMX | 1.3.6.1.4.1.3323.11.1.4 | ||||||||||||
| NmnRegSysProtMXD | 1.3.6.1.4.1.3323.11.1.5 | ||||||||||||
| NmnRegSysProtHE32 | 1.3.6.1.4.1.3323.11.1.6 | ||||||||||||
| NmnModules | 1.3.6.1.4.1.3323.11.2 | ||||||||||||
| NmnCommon | 1.3.6.1.4.1.3323.12 | ||||||||||||
| NmnProducts | 1.3.6.1.4.1.3323.13 | ||||||||||||
| NmnProtAMTV1MIB | 1.3.6.1.4.1.3323.13.1 | ||||||||||||
| NmnPrFV2Notifications | 1.3.6.1.4.1.3323.13.1.0 | ||||||||||||
| !mnPrFNotificationMajorAlarmSet | 1.3.6.1.4.1.3323.13.1.0.1 | ||||||||||||
notification A major level Alarm was set (see varbinds for details). | |||||||||||||
| !mnPrFNotificationAlarmClear | 1.3.6.1.4.1.3323.13.1.0.2 | ||||||||||||
notification An Alarm was cleared (see varbinds for details). | |||||||||||||
| !mnPrFNotificationMinorAlarmSet | 1.3.6.1.4.1.3323.13.1.0.3 | ||||||||||||
notification A minor level Alarm was set (see varbinds for details). | |||||||||||||
| !mnPrFNotificationInfoAlarmSet | 1.3.6.1.4.1.3323.13.1.0.4 | ||||||||||||
notification An informational Alarm was set (see varbinds for details). | |||||||||||||
| NmnPrStatusObjects | 1.3.6.1.4.1.3323.13.1.1 | ||||||||||||
| NmnPrLinkStatusObjects | 1.3.6.1.4.1.3323.13.1.1.1 | ||||||||||||
| SmnPrLinkStatLinkUp | 1.3.6.1.4.1.3323.13.1.1.1.1 | TruthValue | RO | mandatory | 1 | ||||||||
scalar · TruthValue · read-only · mandatory True if the radio link itself is up (passing data in both directions.) Note that this can be true even if there are non-critical errors, or even if one or two radios have failed in a protected link. Example values from LibreNMS test devices
| |||||||||||||
| SmnPrLinkStatReachable | 1.3.6.1.4.1.3323.13.1.1.1.8 | INTEGER (0..255) | RO | mandatory | |||||||||
scalar · INTEGER (0..255) · read-only · mandatory A bitmapped object that reveals which of the radios in the link are 'reachable' from the agent (i.e.: which radios have bidirectional connectivity with the agent). Bits (0=lsb) have the following meaning: 0 (mask 1) = NE primary radio is reachable from agent 1 (mask 2) = FE primary radio is reachable from agent 2 (mask 4) = NE secondary radio is reachable from agent 4 (mask 8) = FE secondary radio is reachable from agent | |||||||||||||
| SmnPrLinkStatAccessLevel | 1.3.6.1.4.1.3323.13.1.1.1.9 | AccessLevel | RO | mandatory | |||||||||
scalar · AccessLevel · read-only · mandatory Indicates the security access level of the request that was used to retrieve this object. Used by management software to determine what access level it has. | |||||||||||||
| SmnPrLinkStatLastErrorText | 1.3.6.1.4.1.3323.13.1.1.1.10 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory Error text corresponding to last failure while attempting to complete a user's request to change a configuration or control object. Every radio's agent has its own instance of mnPrLinkStatLastErrorText. Even if the object that was not changed is on another radio, the associated error text is stored on the radio where the requesting agent is. This object will be cleared (set to a null string) to help insure that stale messages are not retrieved. | |||||||||||||
| SmnPrLinkStatLocalRadioIndex | 1.3.6.1.4.1.3323.13.1.1.1.11 | INTEGER (1..64) | RO | mandatory | 1 | ||||||||
scalar · INTEGER (1..64) · read-only · mandatory The radio index for the radio processing the SNMP request. When accessing an ifEntry, using this value as the ifIndex yields the conceptual row of the inter-radio communication interface for this radio. By convention, specific values of the mnPrLinkStatLocalRadioIndex object are assigned as follows: 1 = NE primary radio 2 = FE primary radio (never returned as local index) 3 = NE secondary radio 4 = FE secondary radio (never returned as local index) The assignment of the mnPrLinkStatLocalRadioIndex value persists across reinitializations of the radio. Example values from LibreNMS test devices
| |||||||||||||
| TmnPrRadStatTable | 1.3.6.1.4.1.3323.13.1.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing system status information for each radio in the link. | |||||||||||||
| RmnPrRadStatEntry | 1.3.6.1.4.1.3323.13.1.1.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of system status information for a single radio within the link.
| |||||||||||||
| CmnRadioIndex | 1.3.6.1.4.1.3323.13.1.1.2.1.1 | INTEGER (1..64) | RO | mandatory | |||||||||
column · INTEGER (1..64) · read-only · mandatory The radio index. When accessing an ifEntry, using this value as the ifIndex yields the conceptual row of the inter-radio communication interface for this radio. By convention, specific values of the mnRadioIndex object are assigned as follows: 1 = NE primary radio 2 = FE primary radio 3 = NE secondary radio 4 = FE secondary radio The assignment of the mnRadioIndex value persists across reinitializations of the radio. | |||||||||||||
| CmnPrRadStatCurSeverity | 1.3.6.1.4.1.3323.13.1.1.2.1.2 | ITUSeverity | RO | mandatory | 1 | ||||||||
column · ITUSeverity · read-only · mandatory The maximum current alarm severity for this radio These are the standard values as per ITU X.733. The first release of the radio firmware supports just cleared, major and minor. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrRadStatLatchSeverity | 1.3.6.1.4.1.3323.13.1.1.2.1.3 | ITUSeverity | RO | mandatory | 4 | ||||||||
column · ITUSeverity · read-only · mandatory The maximum alarm severity attained by this radio since latched alarms were last reset. These are the standard values as per ITU X.733. The first release of the radio firmware supports just cleared, major and minor. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrRadStatMinorAlarm | 1.3.6.1.4.1.3323.13.1.1.2.1.4 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory True if there is a minor alarm active this radio. | |||||||||||||
| CmnPrRadStatControlOn | 1.3.6.1.4.1.3323.13.1.1.2.1.5 | TruthValue | RO | mandatory | 2 | ||||||||
column · TruthValue · read-only · mandatory True if there is a control (mute, loopback, BERT) on (in the non-default, service-affecting state) in this radio. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrRadStatCurAlarmList | 1.3.6.1.4.1.3323.13.1.1.2.1.6 | OCTET STRING (SIZE (256)) | RO | mandatory | |||||||||
column · OCTET STRING (SIZE (256)) · read-only · mandatory List of radio's currently active alarms. The OCTET STRING is a series of up to 128 16-bit words, each word representing the alarm ID of an active alarm, in ascending order by alarm ID. The string is terminated by a word containing 0. This object allows all the alarms to be retrieved in a single PDU. | |||||||||||||
| CmnPrRadStatUptime | 1.3.6.1.4.1.3323.13.1.1.2.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The elapsed time, in seconds, since this radio was last rebooted. | |||||||||||||
| CmnPrRadStatLastAlarmChangeTime | 1.3.6.1.4.1.3323.13.1.1.2.1.10 | TimeTicks | RO | mandatory | |||||||||
column · TimeTicks · read-only · mandatory The time the alarm state of this radio last changed. The time is in centiseconds since agent radio was last rebooted: i.e.: it the value of the agent's SysUptime object at the time of the last change.) | |||||||||||||
| CmnPrRadStatLastCCChangeTime | 1.3.6.1.4.1.3323.13.1.1.2.1.12 | TimeTicks | RO | mandatory | |||||||||
column · TimeTicks · read-only · mandatory The time that a configuation or control object of this radio was last changed by the user. The time is in centiseconds since agent radio was last rebooted: i.e.: it the value of the agent's SysUptime object at the time of the last change.) | |||||||||||||
| CmnPrRadStatLatchedTimeString | 1.3.6.1.4.1.3323.13.1.1.2.1.13 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The elapsed time since latched alarms were last reset on this radio. This object has the format `000d 00:00:00'. | |||||||||||||
| CmnPrRadStatImageBooted | 1.3.6.1.4.1.3323.13.1.1.2.1.14 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This object identifies which firmware image is currently running on this radio.
| |||||||||||||
| CmnPrRadStatIFBoardType | 1.3.6.1.4.1.3323.13.1.1.2.1.15 | IfBandwidth | RO | mandatory | |||||||||
column · IfBandwidth · read-only · mandatory Installed IF Board Type defined by its physical filter bandwidths (bandwidths of 2.5, 3.5, 5, 7, 10, 14, 20, 25, and 28 MHz for this radio). | |||||||||||||
| CmnPrRadStatPSVoltage | 1.3.6.1.4.1.3323.13.1.1.2.1.16 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Power Supply type for this radio.
| |||||||||||||
| CmnPrRadStatODUFreqBand | 1.3.6.1.4.1.3323.13.1.1.2.1.17 | INTEGER (0..50) | RO | mandatory | 6 | ||||||||
column · INTEGER (0..50) · read-only · mandatory ODU Frequency Band (GHz) for this radio. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrRadStatODUSubBand | 1.3.6.1.4.1.3323.13.1.1.2.1.18 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory ODU sub band for this radio.
| |||||||||||||
| CmnPrRadStatODUTxHigh | 1.3.6.1.4.1.3323.13.1.1.2.1.19 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory ODU Tx High. True if this radio's ODU is Tx High. | |||||||||||||
| CmnPrRadStatMinTxFreq | 1.3.6.1.4.1.3323.13.1.1.2.1.20 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The minimum allowable transmitter frequency for this radio. | |||||||||||||
| CmnPrRadStatMaxTxFreq | 1.3.6.1.4.1.3323.13.1.1.2.1.21 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The maximum allowable transmitter frequency for this radio. | |||||||||||||
| CmnPrRadStatMinRxFreq | 1.3.6.1.4.1.3323.13.1.1.2.1.22 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The minimum allowable receiver frequency for this radio. | |||||||||||||
| CmnPrRadStatMaxRxFreq | 1.3.6.1.4.1.3323.13.1.1.2.1.23 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The maximum allowable receiver frequency for this radio. | |||||||||||||
| CmnPrRadStatProtType | 1.3.6.1.4.1.3323.13.1.1.2.1.24 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The protection type of this radio.
| |||||||||||||
| CmnPrRadStatProtOtherRadioAlarm | 1.3.6.1.4.1.3323.13.1.1.2.1.25 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory The radio on the other side of the hot standby shelf has a High-Priority Alarm. | |||||||||||||
| CmnPrRadStatProtManualMode | 1.3.6.1.4.1.3323.13.1.1.2.1.26 | TruthValue | RO | mandatory | 2 | ||||||||
column · TruthValue · read-only · mandatory Either a user has set mnPrIDUConfProtOnlineRequest or the switch on the front of the hot standby shelf has been put into the manual position. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrRadStatProtOnlineState | 1.3.6.1.4.1.3323.13.1.1.2.1.27 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory This IDU is currently on-line. | |||||||||||||
| CmnPrRadStatMinTxPower | 1.3.6.1.4.1.3323.13.1.1.2.1.28 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The maximum allowable transmitter power for this radio. | |||||||||||||
| CmnPrRadStatMaxTxPower | 1.3.6.1.4.1.3323.13.1.1.2.1.29 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The minimum allowable transmitter power for this radio. | |||||||||||||
| CmnPrRadStatPerfHistDuration | 1.3.6.1.4.1.3323.13.1.1.2.1.30 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The elapsed time of performance history data that is currently available. This is based on the number of records currently stored and the sample frequency. This object has the format `000 d 00:00:00'. | |||||||||||||
| CmnPrRadStatPerfHistMinDuration | 1.3.6.1.4.1.3323.13.1.1.2.1.31 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The minimum time of performance history data that will be available at any time assuming that performance history collection has been enabled for a sufficient amount of time. This is based on the number of records that can be stored and the sample frequency. This object has the format `000 d 00:00:00'. | |||||||||||||
| CmnPrRadStatPerfHistRecords | 1.3.6.1.4.1.3323.13.1.1.2.1.32 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The number of performance history samples that are currently available. | |||||||||||||
| CmnPrRadStatPerfHistMinRecords | 1.3.6.1.4.1.3323.13.1.1.2.1.33 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The minimum number of performance history samples that will be available at any time assuming that performance history collection has been enabled for a sufficient amount of time. | |||||||||||||
| CmnPrRadStatPerfHistMaxVarIndex | 1.3.6.1.4.1.3323.13.1.1.2.1.34 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The maximum number of performance history variables available to be sampled. This cannot exceed 32. | |||||||||||||
| CmnPrRadStatTrSpace | 1.3.6.1.4.1.3323.13.1.1.2.1.35 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The transmit/receive spacing in kilohertz for this radio. | |||||||||||||
| CmnPrRadStatModulation | 1.3.6.1.4.1.3323.13.1.1.2.1.36 | ModulationType | RO | mandatory | 5 | ||||||||
column · ModulationType · read-only · mandatory The modulation type used for the current modem configuration. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrRadStatProtToggleMode | 1.3.6.1.4.1.3323.13.1.1.2.1.41 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Position of the Protection Toggle Switch on the LSM directly connected to this radio. positionAuto(1) allows automatic protection switching. The other two values force all the traffic to go through the either the Primary or the Secondary (AMT-M).
| |||||||||||||
| CmnPrRadStatModulationInst | 1.3.6.1.4.1.3323.13.1.1.2.1.42 | ModulationType | RO | mandatory | |||||||||
column · ModulationType · read-only · mandatory Maximum licensed modulation. (AMT-M) | |||||||||||||
| CmnPrRadStatModulationConf | 1.3.6.1.4.1.3323.13.1.1.2.1.43 | ModulationType | RO | mandatory | |||||||||
column · ModulationType · read-only · mandatory Currently configured modulation. (AMT-M) | |||||||||||||
| CmnPrRadStatModulationProp | 1.3.6.1.4.1.3323.13.1.1.2.1.44 | ModulationType | RO | mandatory | |||||||||
column · ModulationType · read-only · mandatory Proposed modulation. (AMT-M) | |||||||||||||
| CmnPrRadStatSysGainConf | 1.3.6.1.4.1.3323.13.1.1.2.1.45 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Configured system gain in dB. (AMT-M) | |||||||||||||
| CmnPrRadStatSysGainProp | 1.3.6.1.4.1.3323.13.1.1.2.1.46 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Proposed system gain in dB. (resulting from the 'Evaluate Configuration' operation). (AMT-M) | |||||||||||||
| CmnPrRadStatLoopSwitchStat | 1.3.6.1.4.1.3323.13.1.1.2.1.47 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Loopswitch loop detect status.
| |||||||||||||
| TmnPrRouteStatTable | 1.3.6.1.4.1.3323.13.1.1.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing IP routing information for each radio within the link. | |||||||||||||
| RmnPrRouteStatEntry | 1.3.6.1.4.1.3323.13.1.1.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The IP routing information for a single radio within the link. | |||||||||||||
| CmnPrRouteStatIndex | 1.3.6.1.4.1.3323.13.1.1.3.1.1 | INTEGER (1..100) | RO | mandatory | |||||||||
column · INTEGER (1..100) · read-only · mandatory The index for this route. | |||||||||||||
| CmnPrRouteStatDestination | 1.3.6.1.4.1.3323.13.1.1.3.1.2 | IpAddress | RO | mandatory | |||||||||
column · IpAddress · read-only · mandatory The destination IP address of this route. | |||||||||||||
| CmnPrRouteStatMask | 1.3.6.1.4.1.3323.13.1.1.3.1.3 | IpAddress | RO | mandatory | |||||||||
column · IpAddress · read-only · mandatory The IP subnet mask of this route. | |||||||||||||
| CmnPrRouteStatNextHop | 1.3.6.1.4.1.3323.13.1.1.3.1.4 | IpAddress | RO | mandatory | |||||||||
column · IpAddress · read-only · mandatory The next-hop IP address of this route. | |||||||||||||
| CmnPrRouteStatMetric | 1.3.6.1.4.1.3323.13.1.1.3.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The routing metric (number of routing hops) for this route. | |||||||||||||
| CmnPrRouteStatInterface | 1.3.6.1.4.1.3323.13.1.1.3.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The interface that packets egress when using this route. | |||||||||||||
| CmnPrRouteStatType | 1.3.6.1.4.1.3323.13.1.1.3.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The type of route this is. Currently supported strings are: IND - indirect route (route through router) DIR - direct route (no additional routing hops) | |||||||||||||
| CmnPrRouteStatHowAdded | 1.3.6.1.4.1.3323.13.1.1.3.1.8 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory What caused this route to be added. Currently supported strings are: System - route added by operating system Dynamic - route added by dynamic routing protocol Static - route added by static user entry | |||||||||||||
| TmnPrOpResultTable | 1.3.6.1.4.1.3323.13.1.1.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing Operation Result information for each radio within the link. | |||||||||||||
| RmnPrOpResultEntry | 1.3.6.1.4.1.3323.13.1.1.4.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The Operation Result information for a single radio within the link. | |||||||||||||
| CmnPrOpResultIndex | 1.3.6.1.4.1.3323.13.1.1.4.1.1 | INTEGER (1..1024) | RO | mandatory | |||||||||
column · INTEGER (1..1024) · read-only · mandatory The index for this entry. | |||||||||||||
| CmnPrOpResultLevel | 1.3.6.1.4.1.3323.13.1.1.4.1.2 | INTEGER | RO | mandatory | |||||||||
| CmnPrOpResultMessage | 1.3.6.1.4.1.3323.13.1.1.4.1.3 | DisplayString | RO | mandatory | |||||||||
| CmnPrOpResultArgument | 1.3.6.1.4.1.3323.13.1.1.4.1.4 | INTEGER | RO | mandatory | |||||||||
| NmnPrAlarmObjects | 1.3.6.1.4.1.3323.13.1.2 | ||||||||||||
| TmnPrCurAlarmTable | 1.3.6.1.4.1.3323.13.1.2.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing current alarm status information for each radio within the link. This table has a primary index, mnRadioIndex, associated with a radio within the link. This table has a secondary index, mnPrCurAlarmID, associated with a specific alarm. | |||||||||||||
| RmnPrCurAlarmEntry | 1.3.6.1.4.1.3323.13.1.2.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of information about a single active alarm within the link.
| |||||||||||||
| CmnPrCurAlarmID | 1.3.6.1.4.1.3323.13.1.2.3.1.1 | INTEGER (0..65535) | RO | mandatory | |||||||||
column · INTEGER (0..65535) · read-only · mandatory The alarm ID. | |||||||||||||
| CmnPrCurAlarmText | 1.3.6.1.4.1.3323.13.1.2.3.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The textual description of this current alarm. | |||||||||||||
| TmnPrLatAlarmTable | 1.3.6.1.4.1.3323.13.1.2.5 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing latched (previously active but not currently active) alarm status information for each radio within the link. This table has a primary index, mnPradioIndex, associated with a radio within the link. This table has a secondary index, mnPrLatAlarmID, associated with a specific alarm. | |||||||||||||
| RmnPrLatAlarmEntry | 1.3.6.1.4.1.3323.13.1.2.5.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of information about a single latched alarm within the link.
| |||||||||||||
| CmnPrLatAlarmID | 1.3.6.1.4.1.3323.13.1.2.5.1.1 | INTEGER (0..65535) | RO | mandatory | |||||||||
column · INTEGER (0..65535) · read-only · mandatory The alarm ID. | |||||||||||||
| CmnPrLatAlarmText | 1.3.6.1.4.1.3323.13.1.2.5.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The textual description of this latched alarm. | |||||||||||||
| TmnPrAlarmLogTable | 1.3.6.1.4.1.3323.13.1.2.6 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Temporary Alarm Log Table | |||||||||||||
| RmnPrAlarmLogEntry | 1.3.6.1.4.1.3323.13.1.2.6.1 | NA | mandatory | ||||||||||
| CmnPrAlarmLogIndex | 1.3.6.1.4.1.3323.13.1.2.6.1.1 | INTEGER (1..9999) | RO | mandatory | |||||||||
column · INTEGER (1..9999) · read-only · mandatory Alarm Log Index. | |||||||||||||
| CmnPrAlarmLogText | 1.3.6.1.4.1.3323.13.1.2.6.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Alarm Log Text. | |||||||||||||
| TmnPrEventLogTable | 1.3.6.1.4.1.3323.13.1.2.7 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Temporary Event Log Table | |||||||||||||
| RmnPrEventLogEntry | 1.3.6.1.4.1.3323.13.1.2.7.1 | NA | mandatory | ||||||||||
| CmnPrEventLogIndex | 1.3.6.1.4.1.3323.13.1.2.7.1.1 | INTEGER (1..9999) | RO | mandatory | |||||||||
column · INTEGER (1..9999) · read-only · mandatory Event Log Index. | |||||||||||||
| CmnPrEventLogText | 1.3.6.1.4.1.3323.13.1.2.7.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Event Log Text. | |||||||||||||
| NmnPrNotifyObjects | 1.3.6.1.4.1.3323.13.1.3 | ||||||||||||
| SmnPrNotifyID | 1.3.6.1.4.1.3323.13.1.3.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The AlarmID of the alarm. | |||||||||||||
| SmnPrNotifyText | 1.3.6.1.4.1.3323.13.1.3.2 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory A textual description the alarm. | |||||||||||||
| SmnPrNotifyParameter | 1.3.6.1.4.1.3323.13.1.3.3 | INTEGER (-2147483648..2147483647) | RO | mandatory | |||||||||
scalar · INTEGER (-2147483648..2147483647) · read-only · mandatory This object provides additional information for a alarm. Values are alarm-specific. | |||||||||||||
| SmnPrNotifySeverity | 1.3.6.1.4.1.3323.13.1.3.4 | INTEGER (-2147483648..2147483647) | RO | mandatory | |||||||||
scalar · INTEGER (-2147483648..2147483647) · read-only · mandatory The severity of the alarm. | |||||||||||||
| SmnPrNotifyRadioIndex | 1.3.6.1.4.1.3323.13.1.3.5 | INTEGER (1..64) | RO | mandatory | |||||||||
scalar · INTEGER (1..64) · read-only · mandatory This object provides the mnRadioIndex value representing the radio experiencing the alarm, relative to the relaying (agent) radio. The trap will have the IP address of the relaying radio, but the RadioIndex will indicate which radio the alarm is associated with. | |||||||||||||
| SmnPrNotifyRadioName | 1.3.6.1.4.1.3323.13.1.3.6 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This object provides the administratively assigned name of the radio experiencing the alarm. The value of this object is configured via the mnPrSysConfRadioName object. | |||||||||||||
| SmnPrNotifyTimeStamp | 1.3.6.1.4.1.3323.13.1.3.7 | DateAndTime | RO | mandatory | |||||||||
scalar · DateAndTime · read-only · mandatory The time that the alarm was sent, according to the originating radio's realtime clock. | |||||||||||||
| NmnPrPerformanceObjects | 1.3.6.1.4.1.3323.13.1.4 | ||||||||||||
| TmnPrPerfBaseTable | 1.3.6.1.4.1.3323.13.1.4.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing the base performance objects from whose values all other performance statistics and performance history is derived. The objects are gauges and counters, and the counters start counting when the radio is initialized, and are never reset. Virtual 64-bit counters (Display64 DisplayString objects) are used in some circumstances to ensure that no counter can possibly overflow in less than 100 years. | |||||||||||||
| RmnPrPerfBaseEntry | 1.3.6.1.4.1.3323.13.1.4.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of base performance objects for a single radio or interface.
| |||||||||||||
| CmnInterfaceIndex | 1.3.6.1.4.1.3323.13.1.4.1.1.1 | INTEGER (1..9999) | RO | mandatory | 1 | ||||||||
| CmnPrPerfBaseTxPower | 1.3.6.1.4.1.3323.13.1.4.1.1.2 | INTEGER (-110..30) | RO | mandatory | 22 | ||||||||
column · INTEGER (-110..30) · read-only · mandatory The actual transmit power for this radio in dBm, resulting from user setting or ATPC. -100 is returned if the TxPower is not known. -101 is returned if the Transmitter has failed. -102 is returned if the Transmitter is muted. 0 is returned if the row refers to a tributary. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrPerfBaseRSL | 1.3.6.1.4.1.3323.13.1.4.1.1.3 | INTEGER (-100..0) | RO | mandatory | -42 | ||||||||
column · INTEGER (-100..0) · read-only · mandatory The received signal level (RSL) in dBm. 0 is returned if the row refers to a tributary. -99 is returned if no RFU is attached. | |||||||||||||
| CmnPrPerfBaseFadeMargin | 1.3.6.1.4.1.3323.13.1.4.1.1.4 | INTEGER (-100..100) | RO | mandatory | 33 | ||||||||
| CmnPrPerfBaseElapsedSecs | 1.3.6.1.4.1.3323.13.1.4.1.1.5 | Counter32 | RO | mandatory | 95982252 | ||||||||
| CmnPrPerfBaseASs | 1.3.6.1.4.1.3323.13.1.4.1.1.6 | Counter32 | RO | mandatory | 95934180 | ||||||||
column · Counter32 · read-only · mandatory The count of G.826 Available Seconds observed for the radio or tributary interface in question since the radio software initialized. May not be reset. | |||||||||||||
| CmnPrPerfBaseUSs | 1.3.6.1.4.1.3323.13.1.4.1.1.7 | Counter32 | RO | mandatory | 48072 | ||||||||
column · Counter32 · read-only · mandatory The count of G.826 Unavailable Seconds observed for the radio or tributary interface in question since the radio software initialized. May not be reset. | |||||||||||||
| CmnPrPerfBaseESs | 1.3.6.1.4.1.3323.13.1.4.1.1.8 | Counter32 | RO | mandatory | 3275895 | ||||||||
column · Counter32 · read-only · mandatory The count of G.826 Errored Seconds observed for the radio or tributary interface in question since the radio software initialized. May not be reset. | |||||||||||||
| CmnPrPerfBaseSESs | 1.3.6.1.4.1.3323.13.1.4.1.1.9 | Counter32 | RO | mandatory | 78882 | ||||||||
column · Counter32 · read-only · mandatory The count of G.826 Severely Errored Seconds observed for the radio or tributary interface in question since the radio software initialized. May not be reset. | |||||||||||||
| CmnPrPerfBaseTotalBlocks | 1.3.6.1.4.1.3323.13.1.4.1.1.10 | Display64 | RO | mandatory | 6,744,216,779,997 | ||||||||
column · Display64 · read-only · mandatory The count of G.826 blocks passed by the radio or tributary interface in question since the radio software initialized. 64-bit counter expressed as an ASCII string. May not be reset. | |||||||||||||
| CmnPrPerfBaseErrBlocks | 1.3.6.1.4.1.3323.13.1.4.1.1.11 | Display64 | RO | mandatory | 503,147,720 | ||||||||
column · Display64 · read-only · mandatory The count of G.826 errored blocks observed by the radio or tributary interface in question since the radio software initialized. 64-bit counter expressed as an ASCII string. May not be reset. | |||||||||||||
| CmnPrPerfBaseBBEs | 1.3.6.1.4.1.3323.13.1.4.1.1.12 | Display64 | RO | mandatory | 13,966,640 | ||||||||
column · Display64 · read-only · mandatory The count of G.826 background block errors (BBEs) observed by the radio or tributary interface in question since the radio software initialized. These are errored blocks that did NOT occur in a SES. 64-bit counter expressed as an ASCII string. May not be reset. | |||||||||||||
| CmnPrPerfBaseSNR | 1.3.6.1.4.1.3323.13.1.4.1.1.13 | DisplayString | RO | mandatory | 37.50 | ||||||||
| CmnPrPerfBaseDecoderStress | 1.3.6.1.4.1.3323.13.1.4.1.1.14 | DisplayString | RO | mandatory | 0.00e+00 | ||||||||
column · DisplayString · read-only · mandatory Decoder Stress Example values from LibreNMS test devices
| |||||||||||||
| CmnPrPerfBaseAcmTxProfile | 1.3.6.1.4.1.3323.13.1.4.1.1.15 | DisplayString | RO | mandatory | 6: 32QAM-106 | ||||||||
column · DisplayString · read-only · mandatory Current ACM Tx Profile information: (<profile index>: <modulation>-<total capacity> Example values from LibreNMS test devices
| |||||||||||||
| CmnPrPerfBaseAcmRxProfile | 1.3.6.1.4.1.3323.13.1.4.1.1.16 | DisplayString | RO | mandatory | 6: 32QAM-106 | ||||||||
column · DisplayString · read-only · mandatory Current ACM Rx Profile information: (<profile index>: <modulation>-<total capacity>) Example values from LibreNMS test devices
| |||||||||||||
| CmnPrPerfBaseLinkCapMbps | 1.3.6.1.4.1.3323.13.1.4.1.1.17 | INTEGER | RO | mandatory | 106 | ||||||||
column · INTEGER · read-only · mandatory Current overall link capacity (PDH, Ethernet, overhead) in the Rx direction, in Megabits/sec. Affected by ACM changes. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrPerfBaseRxEtherMbps | 1.3.6.1.4.1.3323.13.1.4.1.1.18 | DisplayString | RO | mandatory | 9.07e-02 | ||||||||
column · DisplayString · read-only · mandatory Current (last valid, last ~2 seconds) rate of received Ethernet traffic over all Ethernet channels, in Megabits/sec. | |||||||||||||
| CmnPrPerfBaseDemodErrBlocks | 1.3.6.1.4.1.3323.13.1.4.1.1.19 | Display64 | RO | mandatory | 0 | ||||||||
column · Display64 · read-only · mandatory Count of uncorrected errored blocks seen by the local Demod since boot. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrPerfBaseRFUTemp | 1.3.6.1.4.1.3323.13.1.4.1.1.20 | INTEGER | RO | mandatory | 30 | ||||||||
| CmnPrPerfBaseRSL1 | 1.3.6.1.4.1.3323.13.1.4.1.1.21 | INTEGER (-100..0) | RO | mandatory | -99 | ||||||||
column · INTEGER (-100..0) · read-only · mandatory The received signal level (RSL) in dBm for the main (default) receiver in an RFU that has two receivers and the ability to switch internally between them (or use both) so as to supply the best possible signal on the IF interface. -99 is returned if the RFU does not have this dual-RX feature. Example values from LibreNMS test devices
| |||||||||||||
| CmnPrPerfBaseRSL2 | 1.3.6.1.4.1.3323.13.1.4.1.1.22 | INTEGER (-100..0) | RO | mandatory | -99 | ||||||||
column · INTEGER (-100..0) · read-only · mandatory The received signal level (RSL) in dBm for the diversity (backup) receiver in an RFU that has two receivers and the ability to switch internally between them (or use both) so as to supply the best possible signal on the IF interface. -99 is returned if the RFU does not have this dual-RX feature. Example values from LibreNMS test devices
| |||||||||||||
| TmnPrPerfSumIntTable | 1.3.6.1.4.1.3323.13.1.4.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table that summarizes key performance statistics over overlapping intervals leading up to the present: Last Second, Last Minute, Last Hour, Last Day and Last Week. There is a column for each statistic, and a row for each of the five intervals. | |||||||||||||
| RmnPrPerfSumIntEntry | 1.3.6.1.4.1.3323.13.1.4.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of performance statistics for a single radio or interface and for a single summary interval. | |||||||||||||
| CmnIntervalIndex | 1.3.6.1.4.1.3323.13.1.4.2.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Index enumerating what summary interval is being referred to.
| |||||||||||||
| CmnPrPerfSumIntESs | 1.3.6.1.4.1.3323.13.1.4.2.1.2 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory Count of errored seconds for the radio or interface in question, over the summary interval in question. | |||||||||||||
| CmnPrPerfSumIntSESs | 1.3.6.1.4.1.3323.13.1.4.2.1.3 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory Count of severely errored seconds for the radio or interface in question, over the summary interval in question. | |||||||||||||
| CmnPrPerfSumIntBER | 1.3.6.1.4.1.3323.13.1.4.2.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Bit Error Rate for the radio or interface in question, over the summary interval in question. Bit Error Rate is expressed as a string in the format n.nnE-mm. | |||||||||||||
| CmnPrPerfSumIntElapsedSecs | 1.3.6.1.4.1.3323.13.1.4.2.1.5 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory Count of elapsed seconds for the radio or interface in question, over the summary interval in question. | |||||||||||||
| CmnPrPerfSumIntASs | 1.3.6.1.4.1.3323.13.1.4.2.1.6 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory Count of available seconds for the radio or interface in question, over the summary interval in question. | |||||||||||||
| TmnPrPerfCustIntTable | 1.3.6.1.4.1.3323.13.1.4.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing performance statistics for the 'Custom Interval' from the user's last reset of the custom interval to the present, with one row for each radio or interface in the link. The system command resetCustomPerformanceInterval resets all these statistics and thus starts a new custom interval. | |||||||||||||
| RmnPrPerfCustIntEntry | 1.3.6.1.4.1.3323.13.1.4.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of performance statistics pertaining to the custom interval for a single radio or interface.
| |||||||||||||
| CmnPrPerfCustIntTxPowerAvg | 1.3.6.1.4.1.3323.13.1.4.3.1.1 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The average transmit power for this radio in dBm, over the custom interval. Format: '-xx.x'. '' is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfCustIntTxPowerMax | 1.3.6.1.4.1.3323.13.1.4.3.1.2 | INTEGER (-110..30) | RO | mandatory | |||||||||
column · INTEGER (-110..30) · read-only · mandatory The maximum transmit power for this radio in dBm, over the custom interval. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfCustIntTxPowerMin | 1.3.6.1.4.1.3323.13.1.4.3.1.3 | INTEGER (-110..30) | RO | mandatory | |||||||||
column · INTEGER (-110..30) · read-only · mandatory The minimum transmit power for this radio in dBm, over the custom interval. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfCustIntRSLAvg | 1.3.6.1.4.1.3323.13.1.4.3.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The average RSL for this radio in dBm, over the custom interval. Format: '-xx.x'. '' is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfCustIntRSLMax | 1.3.6.1.4.1.3323.13.1.4.3.1.5 | INTEGER (-100..0) | RO | mandatory | |||||||||
column · INTEGER (-100..0) · read-only · mandatory The maximum RSL for this radio in dBm, over the custom interval. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfCustIntRSLMin | 1.3.6.1.4.1.3323.13.1.4.3.1.6 | INTEGER (-100..0) | RO | mandatory | |||||||||
column · INTEGER (-100..0) · read-only · mandatory The minimum RSL for this radio in dBm, over the custom interval. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfCustIntElapsedSecs | 1.3.6.1.4.1.3323.13.1.4.3.1.7 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of seconds since the custom interval was reset. | |||||||||||||
| CmnPrPerfCustIntASs | 1.3.6.1.4.1.3323.13.1.4.3.1.8 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Available Seconds observed for the radio or tributary interface in question since the custom interval was reset. | |||||||||||||
| CmnPrPerfCustIntUSs | 1.3.6.1.4.1.3323.13.1.4.3.1.9 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Unavailable Seconds observed for the radio or tributary interface in question since the custom interval was reset. | |||||||||||||
| CmnPrPerfCustIntESs | 1.3.6.1.4.1.3323.13.1.4.3.1.10 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Errored Seconds observed for the radio or tributary interface in question since the custom interval was reset. | |||||||||||||
| CmnPrPerfCustIntSESs | 1.3.6.1.4.1.3323.13.1.4.3.1.11 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Severely Errored Seconds observed for the radio or tributary interface in question since the custom interval was reset. | |||||||||||||
| CmnPrPerfCustIntTotalBlocks | 1.3.6.1.4.1.3323.13.1.4.3.1.12 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 blocks passed by the radio or tributary interface in question since the custom interval was reset. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfCustIntErrBlocks | 1.3.6.1.4.1.3323.13.1.4.3.1.13 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 errored blocks observed by the radio or tributary interface in question since the custom interval was reset. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfCustIntBBEs | 1.3.6.1.4.1.3323.13.1.4.3.1.14 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 background block errors (BBEs) observed by the radio or tributary interface in question since the custom interval was reset. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfCustIntESRatio | 1.3.6.1.4.1.3323.13.1.4.3.1.15 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Standard G.826 ratio of Errored Seconds / Available Seconds for the radio or interface in question, over the Custom interval. Expressed as a string in the format 'x.xxxxxxxx'. | |||||||||||||
| CmnPrPerfCustIntSESRatio | 1.3.6.1.4.1.3323.13.1.4.3.1.16 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Standard G.826 ratio of Severely Errored Seconds / Available Seconds for the radio or interface in question, over the Custom interval. Expressed as a string in the format 'x.xxxxxxxx'. | |||||||||||||
| CmnPrPerfCustIntBER | 1.3.6.1.4.1.3323.13.1.4.3.1.17 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Bit Error Rate for the radio or interface in question, over the Custom interval. Bit Error Rate is expressed as a string in the format n.nnE-mm. | |||||||||||||
| CmnPrPerfCustIntBBER | 1.3.6.1.4.1.3323.13.1.4.3.1.18 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Background Bit Error Rate for the radio or interface in question, over the Custom interval. Bit Error Rate is expressed as a string in the format n.nnE-mm. This is the same as the normal BER, but using only background bit errors (bit errors in seconds that are not severely errored), not all bit errors. | |||||||||||||
| NmnPrPerfHistObjects | 1.3.6.1.4.1.3323.13.1.4.4 | ||||||||||||
| TmnPrPerfHistTable | 1.3.6.1.4.1.3323.13.1.4.4.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table that contains performance statistics samples taken over a period of time leading up to the present. There is a column for each statistic, and a row for each sample available from the history collection. | |||||||||||||
| RmnPrPerfHistEntry | 1.3.6.1.4.1.3323.13.1.4.4.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of performance statistics pertaining to a single radio or interface during a previous period of time. | |||||||||||||
| CmnPrPerfHistIndex | 1.3.6.1.4.1.3323.13.1.4.4.1.1.1 | INTEGER (1..99999) | RO | mandatory | |||||||||
column · INTEGER (1..99999) · read-only · mandatory Performance History Index. | |||||||||||||
| CmnPrPerfHistTimestamp | 1.3.6.1.4.1.3323.13.1.4.4.1.1.2 | DateAndTime | RO | mandatory | |||||||||
column · DateAndTime · read-only · mandatory The real-time clock value at the time this sample was taken.
The 8-OCTET variant (no time zone information) is used, and
deci-seconds is always 0:
field octets contents range
_____ ______ ________ _____
1 1-2 year 0..65536
(in network byte order)
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9 | |||||||||||||
| CmnPrPerfHistElapsedSecs | 1.3.6.1.4.1.3323.13.1.4.4.1.1.3 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of seconds since the previous sample was taken. | |||||||||||||
| CmnPrPerfHistDowntime | 1.3.6.1.4.1.3323.13.1.4.4.1.1.4 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of seconds of downtime for the radio since the previous sample was taken. | |||||||||||||
| CmnPrPerfHistASs | 1.3.6.1.4.1.3323.13.1.4.4.1.1.5 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Available Seconds observed for the radio or tributary interface in question since the previous sample was taken. | |||||||||||||
| CmnPrPerfHistUSs | 1.3.6.1.4.1.3323.13.1.4.4.1.1.6 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Unavailable Seconds observed for the radio or tributary interface in question since the previous sample was taken. | |||||||||||||
| CmnPrPerfHistESs | 1.3.6.1.4.1.3323.13.1.4.4.1.1.7 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Errored Seconds observed for the radio or tributary interface in question since the previous sample was taken. | |||||||||||||
| CmnPrPerfHistSESs | 1.3.6.1.4.1.3323.13.1.4.4.1.1.8 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The count of G.826 Severely Errored Seconds observed for the radio or tributary interface in question since the previous sample was taken. | |||||||||||||
| CmnPrPerfHistTotalBlocks | 1.3.6.1.4.1.3323.13.1.4.4.1.1.9 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 blocks passed by the radio or tributary interface in question since the previous sample was taken. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfHistErrBlocks | 1.3.6.1.4.1.3323.13.1.4.4.1.1.10 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 errored blocks observed by the radio or tributary interface in question since the previous sample was taken. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfHistErrBackBlocks | 1.3.6.1.4.1.3323.13.1.4.4.1.1.11 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 background block errors observed by the radio or tributary interface in question since the previous sample was taken. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfHistTotalBytes | 1.3.6.1.4.1.3323.13.1.4.4.1.1.12 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 bytes passed by the radio or tributary interface in question since the previous sample was taken. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfHistErrBytes | 1.3.6.1.4.1.3323.13.1.4.4.1.1.13 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 errored bytes observed by the radio or tributary interface in question since the previous sample was taken. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfHistTotalBackBytes | 1.3.6.1.4.1.3323.13.1.4.4.1.1.14 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 background bytes passed by the radio or tributary interface in question since the previous sample was taken. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfHistErrBackBytes | 1.3.6.1.4.1.3323.13.1.4.4.1.1.15 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The count of G.826 errored background bytes observed by the radio or tributary interface in question since the previous sample was taken. 64-bit counter expressed as an ASCII string. | |||||||||||||
| CmnPrPerfHistESRatio | 1.3.6.1.4.1.3323.13.1.4.4.1.1.16 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Standard G.826 ratio of Errored Seconds / Available Seconds for the radio or interface in question, over the previous sample period. Expressed as a string in the format 'n.nnE-mm'. | |||||||||||||
| CmnPrPerfHistSESRatio | 1.3.6.1.4.1.3323.13.1.4.4.1.1.17 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Standard G.826 ratio of Severely Errored Seconds / Available Seconds for the radio or interface in question, over the previous sample period. Expressed as a string in the format 'n.nnE-mm'. | |||||||||||||
| CmnPrPerfHistBER | 1.3.6.1.4.1.3323.13.1.4.4.1.1.18 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Bit Error Rate for the radio or interface in question, over the previous sample period. Bit Error Rate is expressed as a string in the format n.nnE-mm. | |||||||||||||
| CmnPrPerfHistBBER | 1.3.6.1.4.1.3323.13.1.4.4.1.1.19 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Background Bit Error Rate for the radio or interface in question, over the previous sample period. Bit Error Rate is expressed as a string in the format n.nnE-mm. This is the same as the normal BER, but using only background bit errors (bit errors in seconds that are not severely errored), not all bit errors. | |||||||||||||
| CmnPrPerfHistTxPower | 1.3.6.1.4.1.3323.13.1.4.4.1.1.20 | INTEGER (-110..30) | RO | mandatory | |||||||||
column · INTEGER (-110..30) · read-only · mandatory The current transmit power for this radio in dBm, when this sample was taken. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistTxPowerMin | 1.3.6.1.4.1.3323.13.1.4.4.1.1.21 | INTEGER (-110..30) | RO | mandatory | |||||||||
column · INTEGER (-110..30) · read-only · mandatory The minimum transmit power for this radio in dBm, over the previous sample period. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistTxPowerMax | 1.3.6.1.4.1.3323.13.1.4.4.1.1.22 | INTEGER (-110..30) | RO | mandatory | |||||||||
column · INTEGER (-110..30) · read-only · mandatory The maximum transmit power for this radio in dBm, over the previous sample period. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistTxPowerAvg | 1.3.6.1.4.1.3323.13.1.4.4.1.1.23 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The average transmit power for this radio in dBm, over the previous sample period. Format: '-xx.x'. '' is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistRSL | 1.3.6.1.4.1.3323.13.1.4.4.1.1.24 | INTEGER (-100..0) | RO | mandatory | |||||||||
column · INTEGER (-100..0) · read-only · mandatory The RSL for this radio in dBm, when this sample was taken. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistRSLMin | 1.3.6.1.4.1.3323.13.1.4.4.1.1.25 | INTEGER (-100..0) | RO | mandatory | |||||||||
column · INTEGER (-100..0) · read-only · mandatory The minimum RSL for this radio in dBm, over the previous sample period. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistRSLMax | 1.3.6.1.4.1.3323.13.1.4.4.1.1.26 | INTEGER (-100..0) | RO | mandatory | |||||||||
column · INTEGER (-100..0) · read-only · mandatory The maximum RSL for this radio in dBm, over the previous sample period. 0 is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistRSLAvg | 1.3.6.1.4.1.3323.13.1.4.4.1.1.27 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The average RSL for this radio in dBm, over the previous sample. Format: '-xx.x'. '' is returned if the row refers to a tributary. | |||||||||||||
| CmnPrPerfHistAlarmBMP | 1.3.6.1.4.1.3323.13.1.4.4.1.1.28 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The Decimal value for the bitmap of alarms for this interval. Bit definitions, starting at LSB: 0-Major, 1-Minor, 2-LinkDown, 3-RXRSL, 4-RXBER6, 5-RXBER3, 6-RXMUXFAIL, 7-TERMTERM, 8-DATA_TX, 9-RADIO_TX, 10-DATA_RX, 11-RADIO_RX, 12-MAINT_CTRL, 13-EXTRN6, 14-RELAY3, 15-RELAY4, 16-APCPOW, 17-BERCUS, 18-RXMDM | |||||||||||||
| TmnPrPerfHistCsvHdrTable | 1.3.6.1.4.1.3323.13.1.4.4.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table that contains performance statistics variable names currently selected for sampling. This table contains a comma separated values string containing all sampled performance variable names in a single row. | |||||||||||||
| RmnPrPerfHistCsvHdrEntry | 1.3.6.1.4.1.3323.13.1.4.4.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The column header names for a set of performance statistics pertaining to a single radio or interface during a previous period of time in CSV (comma separated values) format.
| |||||||||||||
| CmnPrPerfHistCsvHdr | 1.3.6.1.4.1.3323.13.1.4.4.2.1.1 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The column headers for the set of performance statistics selected for history collection in CSV (comma separated values) format. | |||||||||||||
| TmnPrPerfHistCsvDataTable | 1.3.6.1.4.1.3323.13.1.4.4.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table that contains performance statistics samples taken over a period of time leading up to the present. This table contains a comma separated values string containing all sampled performance variable values in a row for each sample available from the history collection. | |||||||||||||
| RmnPrPerfHistCsvDataEntry | 1.3.6.1.4.1.3323.13.1.4.4.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of performance statistics pertaining to a single radio or interface during a previous period of time in CSV (comma separated values) format. | |||||||||||||
| CmnPrPerfHistCsvData | 1.3.6.1.4.1.3323.13.1.4.4.3.1.1 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory A set of performance statistics pertaining to a single radio or interface during a previous period of time in CSV (comma separated values) format. | |||||||||||||
| NmnPrControlObjects | 1.3.6.1.4.1.3323.13.1.5 | ||||||||||||
| TmnPrRadCtlTable | 1.3.6.1.4.1.3323.13.1.5.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing objects used to control the radio and monitor the effects of that control. These controls are generally for diagnostic purposes, and are not saved in flash, so they do not persist after the radio re-initializes. | |||||||||||||
| RmnPrRadCtlEntry | 1.3.6.1.4.1.3323.13.1.5.1.1 | NA | mandatory | ||||||||||
| CmnPrRadCtlDigAggLoopback | 1.3.6.1.4.1.3323.13.1.5.1.1.1 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory If set to 'True', enables digital aggregate loopback (loops IDU's entire aggregate digital output signal back into IDU.) | |||||||||||||
| CmnPrRadCtlBERTTxPattern | 1.3.6.1.4.1.3323.13.1.5.1.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Enables or disables IDU's Internal Aggregate BER Tester (BERT). Power-up default is 'disableBERT(1)'. When BERT is enabled, all the associated read-only variables are set to thier initial values (0). When the BERT is disabled, the variables are frozen.
| |||||||||||||
| CmnPrRadCtlBERTTimeString | 1.3.6.1.4.1.3323.13.1.5.1.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The elapsed time since the BERT was enabled. Format: `000d 00:00:00'. | |||||||||||||
| CmnPrRadCtlBERTTotal | 1.3.6.1.4.1.3323.13.1.5.1.1.4 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The total count of bits received by the BERT receiver since the BERT was enabled. Initial value is '0'. | |||||||||||||
| CmnPrRadCtlBERTErrors | 1.3.6.1.4.1.3323.13.1.5.1.1.5 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The total count of ERRORRED bits received by the BERT receiver since the BERT was enabled. Initial value is '0'. | |||||||||||||
| CmnPrRadCtlBERTBER | 1.3.6.1.4.1.3323.13.1.5.1.1.6 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Bit Error Rate seen by the BERT receiver for the entire period from when the BERT was enabled to the present. Format n.nnnnnnE-mm. Initial value is '0.000000E-00'. | |||||||||||||
| CmnPrRadCtrDigAggLoopTime | 1.3.6.1.4.1.3323.13.1.5.1.1.7 | INTEGER (0..3600) | RW | mandatory | |||||||||
column · INTEGER (0..3600) · read-write · mandatory This is the time in seconds that the aggregate loopback will stay on. A value of 0 indicates that the loopback will stay on forever. The maximum value is 3600 (one hour). | |||||||||||||
| CmnPrRadCtlODUMute | 1.3.6.1.4.1.3323.13.1.5.1.1.8 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory If TRUE, ODU is muted. Note that this is the user initiated mute state which is saved in flash, so mute state persists across reboots. Also note that mnPrODUConfMute can also cause the ODU to be muted based on the online state of the IDU. UserMute ProtectionMute mnPrRadCtlODUMute mnPrODUConfMute EM Mute State - - False False Online - X False True Standby X - True True Muted X X True True Muted | |||||||||||||
| CmnPrRadCtlODUMuteTime | 1.3.6.1.4.1.3323.13.1.5.1.1.9 | INTEGER (0..3600) | RW | mandatory | |||||||||
column · INTEGER (0..3600) · read-write · mandatory This is the time in seconds that the ODU will remain muted. A value of 0 indicates that the mute will stay on forever. The maximum value is 3600 (one hour). | |||||||||||||
| TmnPrLIMCtlTable | 1.3.6.1.4.1.3323.13.1.5.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing objects used to control the LIM and monitor the effects of that control. These controls are generally for diagnostic purposes, and are not saved in flash, so they do not persist after the radio re-initializes. | |||||||||||||
| RmnPrLIMCtlEntry | 1.3.6.1.4.1.3323.13.1.5.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Control objects for one radio in the link.
| |||||||||||||
| CmnLIMIndex | 1.3.6.1.4.1.3323.13.1.5.2.1.1 | INTEGER (1..9) | RO | mandatory | |||||||||
column · INTEGER (1..9) · read-only · mandatory 1=LIM A (uBus on MX), 2=LIM B (TLI on MX), 3=Integrated Ethernet (on MX), 9=Integrated Ethernet (on AMT-M, limited cases, not in this table) | |||||||||||||
| CmnPrLIMCtlBERTTrib | 1.3.6.1.4.1.3323.13.1.5.2.1.2 | INTEGER (1..120) | RW | mandatory | |||||||||
column · INTEGER (1..120) · read-write · mandatory Specifies what Tributary within the LIM that the Internal LIM BER Tester (BERT) will operate on. Power-up default is 1. | |||||||||||||
| CmnPrLIMCtlBERTTxPattern | 1.3.6.1.4.1.3323.13.1.5.2.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Enables or disables LIM's Internal Tributary BER Tester (BERT). Power-up default is 'disableBERT(1)'. When BERT is enabled, all the associated read-only variables are set to thier initial values (0). When the BERT is disabled, the variables are frozen.
| |||||||||||||
| CmnPrLIMCtlBERTTimeString | 1.3.6.1.4.1.3323.13.1.5.2.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The elapsed time since the BERT was enabled. Format: `000d 00:00:00'. | |||||||||||||
| CmnPrLIMCtlBERTTotal | 1.3.6.1.4.1.3323.13.1.5.2.1.5 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The total count of bits received by the BERT receiver since the BERT was enabled. Initial value is '0'. | |||||||||||||
| CmnPrLIMCtlBERTErrors | 1.3.6.1.4.1.3323.13.1.5.2.1.6 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory The total count of ERRORRED bits received by the BERT receiver since the BERT was enabled. Initial value is '0'. | |||||||||||||
| CmnPrLIMCtlBERTBER | 1.3.6.1.4.1.3323.13.1.5.2.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Bit Error Rate seen by the BERT receiver for the entire period from when the BERT was enabled to the present. Format n.nnnnnnE-mm. Initial value is '0.000000E-00'. | |||||||||||||
| TmnPrTribCtlTable | 1.3.6.1.4.1.3323.13.1.5.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing objects used to control the tributaries. These controls are generally for diagnostic purposes, and are not saved in flash, so they do not persist after the radio re-initializes. | |||||||||||||
| RmnPrTribCtlEntry | 1.3.6.1.4.1.3323.13.1.5.3.1 | NA | mandatory | ||||||||||
| CmnTribIndex | 1.3.6.1.4.1.3323.13.1.5.3.1.1 | INTEGER (1..9999) | RO | mandatory | |||||||||
column · INTEGER (1..9999) · read-only · mandatory rltt, where r=radio index, l=LIM # (1, 2 or 3* or 9*), and tt=Tributary number on LIM: 1203 2101 etc. If Tributary number is 00, then the index refers to the LIM itself. Note that MX has three Line Interfaces (LIs): uBus(1), TLI(2), and Ethernet(3) | |||||||||||||
| CmnPrTribCtlLocalLoopback | 1.3.6.1.4.1.3323.13.1.5.3.1.2 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory If set to 'True', enables tributary local loopback (loops incoming tributary signal back out to customer equipment.) | |||||||||||||
| CmnPrTribCtlRemoteLoopback | 1.3.6.1.4.1.3323.13.1.5.3.1.3 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory If set to 'True', enables tributary remote loopback (loops outgoing tributary signal back into tributary.) | |||||||||||||
| NmnPrConfigurationObjects | 1.3.6.1.4.1.3323.13.1.6 | ||||||||||||
| TmnPrInventTable | 1.3.6.1.4.1.3323.13.1.6.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing inventory information and service state about each component within this link. The service state is provided for components that exist within the product, but are disabled for some reason, usually due to feature license restrictions. | |||||||||||||
| RmnPrInventEntry | 1.3.6.1.4.1.3323.13.1.6.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory | |||||||||||||
| CmnPrInventCompIndex | 1.3.6.1.4.1.3323.13.1.6.1.1.1 | INTEGER (1..9999) | RO | mandatory | |||||||||
column · INTEGER (1..9999) · read-only · mandatory Component Index 5 = Sales Order 10 = ODU 11 = ODU Firmware 20 = IDU 21 = IDU Firmware 22 = IF Board 23 = IDU Power Supply 26 = CU SIM Card (MX) 30 = LIMA 40 = LIMB 43 = Backplane (MX) 44 = I/O Board (MX) 50 = Image 1 Firmware (AMT), Bootloader (AMT-L and later) 51 = Image 2 Firmware (AMT), Image 1 Firmware (AMT-L and later) 52 = Image 2 Firmware (AMT-L and later) 60 = TX FPGA Firmware (AMT-M) 61 = RX FPGA Firmware (AMT-M) 62 = 16 DS1/E1 LIM Firmware (AMT-M) 63 = E3 LIM Firmware (AMT-M) 64 = 100BT LIM Firmware (AMT-M) 65 = 32 DS1/E1 LIM Firmware (AMT-M, MX) 66 = DS3 LIM Firmware (AMT-M, MX) 67 = 155Mb LIM Firmware (AMT-M, MX) 68 = Microbus LIM Firmware (AMT-M) 69 = GigE LIM Firmware (AMT-M) 70 = 32 DS1/E1 SHARP LIM Firmware (AMT-M (..131) and MX (..150)) 77 = LIM A GigE Switch Application (AMT-M) 78 = LIM B GigE Switch Application (AMT-M) 79 = Microbus LI Firmware (MX) 80 = Mux/Demux FPGA F/W (MX) 81 = Modem Application F/W (MX) 82 = Active Modem Configuration (MX) 83 = Default Modem Configuration (MX) 84 = Standard Modem Catalog (MX) 86 = 8GigE + 32DS1/E1 Hybrid TLI Firmware (MX) 87 = 4DS3 + 32DS1 Hybrid TLI Firmware (MX) 100 = Mux/Demux FPGA F/W [App] (MX) 101 = Modem Application F/W [App] (MX) etc. | |||||||||||||
| CmnPrInventCompText | 1.3.6.1.4.1.3323.13.1.6.1.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The name of the component. | |||||||||||||
| CmnPrInventModPartText | 1.3.6.1.4.1.3323.13.1.6.1.1.3 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The text form of the Model ID / Part Number (if any). | |||||||||||||
| CmnPrInventCheckSumText | 1.3.6.1.4.1.3323.13.1.6.1.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The text form of the code checksum (if any). | |||||||||||||
| CmnPrInventVersionText | 1.3.6.1.4.1.3323.13.1.6.1.1.5 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The text form of the Version (if any). | |||||||||||||
| CmnPrInventSerialText | 1.3.6.1.4.1.3323.13.1.6.1.1.7 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The text form of the Serial Number (if any). | |||||||||||||
| CmnPrInventCompStatus | 1.3.6.1.4.1.3323.13.1.6.1.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The service state of the component.
| |||||||||||||
| CmnPrInventCompType | 1.3.6.1.4.1.3323.13.1.6.1.1.9 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Provides more information about a component. For example in LIM rows, this column contains the LIM hardware type code. | |||||||||||||
| TmnPrODUConfTable | 1.3.6.1.4.1.3323.13.1.6.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters for the ODUs in the link | |||||||||||||
| RmnPrODUConfEntry | 1.3.6.1.4.1.3323.13.1.6.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single ODU within the link.
| |||||||||||||
| CmnPrODUConfTxFreq | 1.3.6.1.4.1.3323.13.1.6.2.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Tx Freq in kHz | |||||||||||||
| CmnPrODUConfRxFreq | 1.3.6.1.4.1.3323.13.1.6.2.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Rx Freq in kHz | |||||||||||||
| CmnPrODUConfTxPower | 1.3.6.1.4.1.3323.13.1.6.2.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Tx Power, in dBm, for the transmitter of this radio (when TxPower is controlled manually, not by ATPC). Under ATPC, this is the maximum allowed TX Power. | |||||||||||||
| CmnPrODUConfATPCEnable | 1.3.6.1.4.1.3323.13.1.6.2.1.4 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory This object provides a means to administratively enable or disable the ATPC (Automatic Power Control) function. | |||||||||||||
| CmnPrODUConfATPCTargetRSL | 1.3.6.1.4.1.3323.13.1.6.2.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The desired received signal level (RSL) in dBm. The value contained in this object is used by the ATPC (Automatic Power Control) function to obtain the desired RSL on the remote side of the link. | |||||||||||||
| CmnPrODUConfMute | 1.3.6.1.4.1.3323.13.1.6.2.1.6 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory If TRUE, ODU is muted as a hot standby. Note that this is NOT saved in flash, but follows the online state of the IDU. For user initiated ODU mute refer to mnPrRadCtlODUMute. | |||||||||||||
| CmnPrODUConfCurInversion | 1.3.6.1.4.1.3323.13.1.6.2.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the spectral inversion of the signals going to and from the RFU. 'defaultInversion' is the factory default value: in this case the Rx and Tx inversion are set to default values associated with each type of RFU.
| |||||||||||||
| CmnPrODUConfDefInversion | 1.3.6.1.4.1.3323.13.1.6.2.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The default inversion for the current ODU.
| |||||||||||||
| TmnPrIDUConfTable | 1.3.6.1.4.1.3323.13.1.6.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters for the IDUs in the link | |||||||||||||
| RmnPrIDUConfEntry | 1.3.6.1.4.1.3323.13.1.6.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single IDU within the link.
| |||||||||||||
| CmnPrIDUConfProtMode | 1.3.6.1.4.1.3323.13.1.6.3.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the protection mode for this radio. Only AMT-M supports modes 3-6, where: hs=hot standby, sd=space diversity, np=not protected, fd=frequency diversity
| |||||||||||||
| CmnPrIDUConfProtOnlineRequest | 1.3.6.1.4.1.3323.13.1.6.3.1.2 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory This object provides a means to configure the online state of the IDU. When set to True, will request that the hot standby shelf switch to make this IDU the online IDU, regardless of alarm conditions. | |||||||||||||
| CmnPrIDUConfOrderwireCode | 1.3.6.1.4.1.3323.13.1.6.3.1.3 | DisplayString (SIZE (1..3)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (1..3)) · read-write · mandatory This object provides a means to configure the DTMF dialing code for this IDU. | |||||||||||||
| CmnPrIDUConfOrderwireMode | 1.3.6.1.4.1.3323.13.1.6.3.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the orderwire as a Voice channel or a 64 Kbps Data channel.
| |||||||||||||
| CmnPrIDUConfAUX1Rate | 1.3.6.1.4.1.3323.13.1.6.3.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the Auxilary channel 1 as 9600 or 19200 baud. (Superceded by mnPrAuxConfTable)
| |||||||||||||
| CmnPrIDUConfAUX2Rate | 1.3.6.1.4.1.3323.13.1.6.3.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the Auxilary channel 2 as 9600 or 19200 baud. (Superceded by mnPrAuxConfTable)
| |||||||||||||
| CmnPrIDUConfCraftBaud | 1.3.6.1.4.1.3323.13.1.6.3.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the craft port baud rate.
| |||||||||||||
| CmnPrIDUConfProposedCapacity | 1.3.6.1.4.1.3323.13.1.6.3.1.8 | INTEGER (0..255) | RO | mandatory | |||||||||
column · INTEGER (0..255) · read-only · mandatory This object shows the total LIM capacity for the proposed LIM types. It acts as the maximum value for mnPrIDUConfAllocateLimA. | |||||||||||||
| CmnPrIDUConfAllocateLimA | 1.3.6.1.4.1.3323.13.1.6.3.1.9 | INTEGER (0..100) | RW | mandatory | |||||||||
column · INTEGER (0..100) · read-write · mandatory This object provides a means to configure the data rate (in compressed Megabits/second) for LIM A. This object only has meaning when both LIMs are configured as 100 BaseT. | |||||||||||||
| CmnPrIDUConfProtTwinAddress | 1.3.6.1.4.1.3323.13.1.6.3.1.10 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory This object configures the IPv4 address of the twin IDU processor used in hot standby configurations. | |||||||||||||
| CmnPrIDUConfIFBandwidthProposed | 1.3.6.1.4.1.3323.13.1.6.3.1.11 | IfBandwidth | RW | mandatory | |||||||||
column · IfBandwidth · read-write · mandatory This is a control object (not saved in flash) that allows the user to specify a new value for the Configured IF Bandwidth. Once the proposed type instances for each LIM and the proposed IF bandwidth are set correctly, the reconfigureModem system command checks the proposed configuration settings, and, if they are a legal combination, copies them into the Configured LIM (mnPrLIMConfTypeConf) and Configured IF Bandwidth (mnPrIDUConfIFBandwidthConf) object instances. | |||||||||||||
| CmnPrIDUConfIFBandwidthConf | 1.3.6.1.4.1.3323.13.1.6.3.1.12 | IfBandwidth | RO | mandatory | |||||||||
column · IfBandwidth · read-only · mandatory The Configured IF Bandwidth. This is saved in flash. It is set only by the reconfigureModem system command, which, if the proposed combination of LIM types and IF Bandwidth is legal, copies the associated Proposed IF Bandwidth object into this object. | |||||||||||||
| CmnPrIDUConfNmsPortSpeed | 1.3.6.1.4.1.3323.13.1.6.3.1.13 | LanSpeed | RW | mandatory | |||||||||
column · LanSpeed · read-write · mandatory This object provides a means to configure the LAN speed settings for the NMS ports. It allows the user to enable auto-negotiation or set the speed and duplex settings to a fixed value. (Note: this object is used by AMT-L. AMT-M uses mnPrAuxEthConfTable.) | |||||||||||||
| CmnPrIDUConfNmsPortMode | 1.3.6.1.4.1.3323.13.1.6.3.1.14 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the NMS management channel to the far-end. A value of mgmtOutOfBand in this object will configure the hardware such that the NMS and payload ethernet data is isolated from each other. A value of mgmtInBand will bridge the NMS ports to the built-in ethernet payload ports.
| |||||||||||||
| CmnPrIDUConfCapacityConf | 1.3.6.1.4.1.3323.13.1.6.3.1.19 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Current total configured capacity in Mb/s. (AMT-M) | |||||||||||||
| CmnPrIDUConfCapacityProp | 1.3.6.1.4.1.3323.13.1.6.3.1.20 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Proposed total configured capacity in Mb/s. (AMT-M) | |||||||||||||
| CmnPrIDUConfIntEthStatusInst | 1.3.6.1.4.1.3323.13.1.6.3.1.21 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Current license status of Integrated Ethernet. (AMT-M)
| |||||||||||||
| CmnPrIDUConfIntEthStatusConf | 1.3.6.1.4.1.3323.13.1.6.3.1.22 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Current configured status of Integrated Ethernet. (AMT-M)
| |||||||||||||
| CmnPrIDUConfIntEthStatusProp | 1.3.6.1.4.1.3323.13.1.6.3.1.23 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Proposed status of Integrated Ethernet. (AMT-M)
| |||||||||||||
| CmnPrIDUConfIntEthCapacityInst | 1.3.6.1.4.1.3323.13.1.6.3.1.24 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Maximum possible capacity of Integrated Ethernet. (AMT-M) | |||||||||||||
| CmnPrIDUConfIntEthCapacityConf | 1.3.6.1.4.1.3323.13.1.6.3.1.25 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Configured capacity of Integrated Ethernet. (AMT-M) | |||||||||||||
| CmnPrIDUConfIntEthCapacityProp | 1.3.6.1.4.1.3323.13.1.6.3.1.26 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Proposed capacity of Integrated Ethernet. (AMT-M) | |||||||||||||
| CmnPrIDUConfLoopSwitchMode | 1.3.6.1.4.1.3323.13.1.6.3.1.27 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Configured mode of loopswitch facility.
| |||||||||||||
| CmnPrIDUConfStatLicCapacity | 1.3.6.1.4.1.3323.13.1.6.3.1.28 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Configured Station License Capacity (kbps): Radio must use this exact capacity after any reconfiguration (unless this object is at its default value of zero, which means that no Station License Capacity will be enforced.) | |||||||||||||
| TmnPrLIMConfTable | 1.3.6.1.4.1.3323.13.1.6.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration information about each LIM within this link. | |||||||||||||
| RmnPrLIMConfEntry | 1.3.6.1.4.1.3323.13.1.6.4.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration information about a single LIM within this link.
| |||||||||||||
| CmnPrLIMConfTypeInstalled | 1.3.6.1.4.1.3323.13.1.6.4.1.1 | LIMType | RO | mandatory | |||||||||
column · LIMType · read-only · mandatory This is a status object that states what kind of LIM is actually physically installed in the associated LIM slot. | |||||||||||||
| CmnPrLIMConfTypeProposed | 1.3.6.1.4.1.3323.13.1.6.4.1.2 | LIMType | RW | mandatory | |||||||||
column · LIMType · read-write · mandatory This is a control object (not saved in flash) that allows the user to specify a new value for the Configured LIM type. Once the instances for each LIM are set correctly, the reconfigureModem system command checks the two instances, and, if they are a legal combination, copies them into the Configured LIM (mnPrLIMConfTypeConf) object instances. | |||||||||||||
| CmnPrLIMConfTypeConf | 1.3.6.1.4.1.3323.13.1.6.4.1.3 | LIMType | RO | mandatory | |||||||||
column · LIMType · read-only · mandatory The Configured LIM type. This is saved in flash. It is set only by the reconfigureLIMs system command, which if the proposed combination is legal, copies the associated Proposed LIM Configuration object into this object. | |||||||||||||
| CmnPrLIMConfCapacity | 1.3.6.1.4.1.3323.13.1.6.4.1.4 | INTEGER (0..255) | RO | mandatory | |||||||||
column · INTEGER (0..255) · read-only · mandatory This object shows the capacity of the associated LIM in Mbits/sec. | |||||||||||||
| CmnPrLIMConfCapacityInst | 1.3.6.1.4.1.3323.13.1.6.4.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Maximum possible capacity of the LIM. (AMT-M) | |||||||||||||
| CmnPrLIMConfCapacityConf | 1.3.6.1.4.1.3323.13.1.6.4.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Currently configured capacity of the LIM. Same as mnPrLIMConfCapacity, but 32 bits (not limited to (0..255)). (AMT-M) | |||||||||||||
| CmnPrLIMConfCapacityProp | 1.3.6.1.4.1.3323.13.1.6.4.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Currently proposed capacity of the LIM. Replaces mnPrIduConfAllocLimA (except that it is 32 bits and has instances for both LIMs.) (AMT-M) | |||||||||||||
| CmnPrLIMConfSHARPInstalled | 1.3.6.1.4.1.3323.13.1.6.4.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||
| TmnPrTribConfTable | 1.3.6.1.4.1.3323.13.1.6.5 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration information about each tributary within this link. | |||||||||||||
| RmnPrTribConfEntry | 1.3.6.1.4.1.3323.13.1.6.5.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration information about a single tributary within this link.
| |||||||||||||
| CmnPrTribConfAdminEquipped | 1.3.6.1.4.1.3323.13.1.6.5.1.1 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory This object provides a means to administratively configure the provisioned equipment state of this tributary. | |||||||||||||
| TmnPrSysConfTable | 1.3.6.1.4.1.3323.13.1.6.6 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing system configuration information for each radio within the link. | |||||||||||||
| RmnPrSysConfEntry | 1.3.6.1.4.1.3323.13.1.6.6.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of system configuration information for a single radio within the link.
| |||||||||||||
| CmnPrSysConfRadioName | 1.3.6.1.4.1.3323.13.1.6.6.1.1 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The administratively assigned name of the radio. The value contained in this object is also reported by the mnPrNotifyRadioName object, and by the MIB-II System Group's SysName objext. | |||||||||||||
| CmnPrSysConfLocation | 1.3.6.1.4.1.3323.13.1.6.6.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The administratively assigned physical location of the radio. The value contained in this object is also reported by the MIB-II System Group's SysLocation objext. | |||||||||||||
| CmnPrSysConfContact | 1.3.6.1.4.1.3323.13.1.6.6.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The administratively assigned name and contact information of the designated responsible person for this radio. An example: `G. Marconi +1 800 555-1212, [email protected]' The value contained in this object is also reported by the MIB-II System Group's SysContact objext. | |||||||||||||
| CmnPrSysConfDateAndTime | 1.3.6.1.4.1.3323.13.1.6.6.1.4 | DateAndTime | RW | mandatory | |||||||||
column · DateAndTime · read-write · mandatory Provides a means to set and read the radio's real-time
clock. The 8-OCTET variant (no time zone information)
is used, and deci-seconds is ignored on write and 0 on read:
field octets contents range
_____ ______ ________ _____
1 1-2 year 0..65536
(in network byte order)
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9 | |||||||||||||
| CmnPrSysConfLicenseKey | 1.3.6.1.4.1.3323.13.1.6.6.1.5 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The upgradeable license key for this radio which unlocks enhanced features. | |||||||||||||
| CmnPrSysConfThroughPut | 1.3.6.1.4.1.3323.13.1.6.6.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This object reports the maximum throughput in mega-bits per second that is licensed for this radio. | |||||||||||||
| CmnPrSysConfTimeZone | 1.3.6.1.4.1.3323.13.1.6.6.1.7 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Offset in hours and minutes between the Universal Coordinated Time (UTC) that SNTP uses and the standard local time that the radio will display.Example: +05:30 (5 hours, 30 minutes west of UTC). Leading '+' and zeros are assumed, as is minutes=0, so '5' == '+05:00'. | |||||||||||||
| CmnPrSysConfDaylightSavings | 1.3.6.1.4.1.3323.13.1.6.6.1.8 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory Daylight Savings time is in effect: local time will be calculated by adding the timezone offset plus one hour to the UTC time that SNTP supplies. | |||||||||||||
| CmnPrSysConfDpmStatus | 1.3.6.1.4.1.3323.13.1.6.6.1.9 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory DPM_COMPATIBILITY_LIM_A_MASK 0x00000001 LIM A only DPM_COMPATIBILITY_LIM_B_MASK 0x00000002 LIM B only DPM_COMPATIBILITY_LIM_CTRL_MASK 0x00000004 LIM controller only DPM_COMPATIBILITY_MAINBD_MASK 0x00000004 mainboard only DPM_COMPATIBILITY_LICENSE_MASK 0x00000100 DPM feature license only DPM_COMPATIBILITY_POLICY_MASK 0x00000200 set if DPM policy != disabled DPM_COMPATIBILITY_LIMCENTRIC_MASK 0x00000800 set if DPM disabled (either no license DPM_STATUS_EXTENDED_POLICY 0x00001000 001 for 1.G DPM_STATUS_EXT_POLICY_MASK 0x00007000 Extended Policy Compatibility Level Mask | |||||||||||||
| CmnPrSysConfDpmPolicy | 1.3.6.1.4.1.3323.13.1.6.6.1.10 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Lower nibble: 1=DPM enabled (standard configuration) 2=DPM disabled (LIM-centric) The rest of the 32bit word will be used as a bit map: DPM_POLICY_EXTENDED_BIT_ENABLE 0x00000010 DPM_POLICY_HARD_MODEM_LOCK 0x00000020 | |||||||||||||
| CmnPrSysConfEncMode | 1.3.6.1.4.1.3323.13.1.6.6.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Changing the encryption mode in FIPS mode requires armTransition to be received before the new mode can be set. Futher it requires the new mode to be set within 10 seconds of the armTransition set. If the system is not in FIPS mode setting armTransition has no effect and setting to any encryption level other than armTransition will cause the new level to be set.
| |||||||||||||
| CmnPrSysConfEncPassword | 1.3.6.1.4.1.3323.13.1.6.6.1.12 | DisplayString | RW | mandatory | |||||||||
| CmnPrSysConfEncFailPolicy | 1.3.6.1.4.1.3323.13.1.6.6.1.13 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||
| CmnPrSysConfFIPSKeyActivate | 1.3.6.1.4.1.3323.13.1.6.6.1.14 | TruthValue | RW | mandatory | |||||||||
| CmnPrSysConfFIPSMode | 1.3.6.1.4.1.3323.13.1.6.6.1.15 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Parameter that determines whether FIPS-140-2 security mode is enabled on the radio. If FIPS-140-2 security mode is enabled, this constrains the security behavior of the radios in a number of ways. Note that only admin users may change this object, and the object can only be changed on the local radio. Changing this object has a number of side-effects...
| |||||||||||||
| TmnPrUserConfTable | 1.3.6.1.4.1.3323.13.1.6.7 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of users for this radio. | |||||||||||||
| RmnPrUserConfEntry | 1.3.6.1.4.1.3323.13.1.6.7.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Information about one user of this radio. | |||||||||||||
| CmnPrUserConfIndex | 1.3.6.1.4.1.3323.13.1.6.7.1.1 | INTEGER (1..64) | RO | mandatory | |||||||||
column · INTEGER (1..64) · read-only · mandatory The index of the user database that contains this row (factory = 1, admin = 2, guest = 3) | |||||||||||||
| CmnPrUserConfUsername | 1.3.6.1.4.1.3323.13.1.6.7.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The user's user name. | |||||||||||||
| CmnPrUserConfPasswordSet | 1.3.6.1.4.1.3323.13.1.6.7.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The user's password. Returns '***' on read, or null
string if the password is not set. This is used as
the CLI password and is used for SNMPv1 and SNMPv2c
community string construction ('|<username>|<password>'
and to create SNMPv3 secret authentication key.) | |||||||||||||
| CmnPrUserConfAccessLevel | 1.3.6.1.4.1.3323.13.1.6.7.1.4 | AccessLevel | RW | mandatory | |||||||||
column · AccessLevel · read-write · mandatory The user's access level. | |||||||||||||
| CmnPrUserConfAuthProtocol | 1.3.6.1.4.1.3323.13.1.6.7.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory (see table)
| |||||||||||||
| CmnPrUserConfPrivProtocol | 1.3.6.1.4.1.3323.13.1.6.7.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory (see table) 3DES 192 256
| |||||||||||||
| CmnPrUserConfPrivPwdSet | 1.3.6.1.4.1.3323.13.1.6.7.1.7 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The password used to create the SNMPv3 secret privacy key. Returns '***' on read, or null string if the password is not set (which is the default case). If this has not been set, and is a null string, SNMPv3 just uses the value of the SNMPv3 authentication password (see mnPrUserConfPasswordSet, above) to create the SNMPv3 secret privacy key. | |||||||||||||
| TmnPrAlarmConfTable | 1.3.6.1.4.1.3323.13.1.6.8 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing alarm configuration information for each radio within the link. | |||||||||||||
| RmnPrAlarmConfEntry | 1.3.6.1.4.1.3323.13.1.6.8.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of alarm configuration information for a single alarm on a single radio within the link.
| |||||||||||||
| CmnAlarmIndex | 1.3.6.1.4.1.3323.13.1.6.8.1.1 | INTEGER (0..65535) | RO | mandatory | |||||||||
column · INTEGER (0..65535) · read-only · mandatory This object identifies the alarm. The index is the same number that is sent in the current alarm list. | |||||||||||||
| CmnPrAlarmConfName | 1.3.6.1.4.1.3323.13.1.6.8.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory This is the full name of the alarm. | |||||||||||||
| CmnPrAlarmConfUserName | 1.3.6.1.4.1.3323.13.1.6.8.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory Portion of the alarm name that may be modified by the user. Only valid for external and relay alarms. | |||||||||||||
| CmnPrAlarmConfAbrev | 1.3.6.1.4.1.3323.13.1.6.8.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Abbreviated alarm name for making smaller labels. | |||||||||||||
| CmnPrAlarmConfMap | 1.3.6.1.4.1.3323.13.1.6.8.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This bit-maps the alarm to certain relays / actions. For example: Bit 0: near-end Relay 1 Bit 1: near-end Relay 2 Bit 2: near-end Relay 3 Bit 3: near-end Relay 4 Bit 4: reserved Bit 5: far-end Relay 1 Bit 6: far-end Relay 2 Bit 7: far-end Relay 3 Bit 8: far-end Relay 4 Bit 9: reserved Bit 10: major alarm Bit 11: minor alarm Bit 12: high priority alarm Bit 13: low priority alarm Bit 14 - 31: reserved | |||||||||||||
| CmnPrAlarmConfCircuitType | 1.3.6.1.4.1.3323.13.1.6.8.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This specifies if associated external input or relay is normally open or normally closed in alarm condition. 99 - Not Applicable 1 - Normally Open (active high) 2 - Normally Closed (active low)
| |||||||||||||
| CmnPrAlarmConfThreshold | 1.3.6.1.4.1.3323.13.1.6.8.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory For alarms that allow settable thresholds, this defines the threshold. For integer values (e.g. Temperature), the value is the threshold. For scientific values (e.g. BER levels), the value is the negative exponent. For example, to set a BER threshold of 10^-3, the value set here should be +3. | |||||||||||||
| CmnPrAlarmConfSet | 1.3.6.1.4.1.3323.13.1.6.8.1.8 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory True if the alarm is currently active, false otherwise. | |||||||||||||
| TmnPrNMConfTable | 1.3.6.1.4.1.3323.13.1.6.9 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing network management configuration information for each radio within the link. | |||||||||||||
| RmnPrNMConfEntry | 1.3.6.1.4.1.3323.13.1.6.9.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of network management configuration information for a single radio within the link.
| |||||||||||||
| CmnPrNMConfDefGateway | 1.3.6.1.4.1.3323.13.1.6.9.1.1 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory This object configures the IPv4 address of the default gateway available via the ethernet interface for this radio. | |||||||||||||
| CmnPrNMConfTrapMode | 1.3.6.1.4.1.3323.13.1.6.9.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Controls what traps are sent: silent: No traps sent terse: Only the Major and Minor summary traps are sent verbose: All traps are sent
| |||||||||||||
| CmnPrNMConfTFTPAddr | 1.3.6.1.4.1.3323.13.1.6.9.1.3 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory This object configures the IPv4 address of the TFTP server. | |||||||||||||
| CmnPrNMConfTFTPFile | 1.3.6.1.4.1.3323.13.1.6.9.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This object configures the default filename to use for TFTP transfers. | |||||||||||||
| CmnPrNMConfSNTPAddr | 1.3.6.1.4.1.3323.13.1.6.9.1.5 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory This object configures the IPv4 address of the SNTP server. | |||||||||||||
| CmnPrNMConfSNTPInterval | 1.3.6.1.4.1.3323.13.1.6.9.1.6 | INTEGER (0..999) | RW | mandatory | |||||||||
column · INTEGER (0..999) · read-write · mandatory The interval in minutes between sucessive scheduled polls of the SNTP server. | |||||||||||||
| CmnPrNMConfSNTPTimeout | 1.3.6.1.4.1.3323.13.1.6.9.1.7 | INTEGER (2..15) | RW | mandatory | |||||||||
column · INTEGER (2..15) · read-write · mandatory The number of seconds to wait before declaring that an SNTP request has timed out. | |||||||||||||
| CmnPrNMConfAuthMode | 1.3.6.1.4.1.3323.13.1.6.9.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Authentication mode: what method(s) to use to attempt to authenticate users, and in what order to attempt those methods
| |||||||||||||
| CmnPrNMConfRADTimeout | 1.3.6.1.4.1.3323.13.1.6.9.1.9 | INTEGER (1..15) | RW | mandatory | |||||||||
column · INTEGER (1..15) · read-write · mandatory RADIUS Timeout in seconds. | |||||||||||||
| CmnPrNMConfRADRetries | 1.3.6.1.4.1.3323.13.1.6.9.1.10 | INTEGER (0..15) | RW | mandatory | |||||||||
column · INTEGER (0..15) · read-write · mandatory Maximum number of times to retry RADIUS requests. | |||||||||||||
| CmnPrNMConfRADDeadtime | 1.3.6.1.4.1.3323.13.1.6.9.1.11 | INTEGER (0..86400) | RW | mandatory | |||||||||
column · INTEGER (0..86400) · read-write · mandatory Time in seconds to avoid using a RADIUS server after it has failed (if there is an alternative). | |||||||||||||
| CmnPrNMConfRADMinPwdLen | 1.3.6.1.4.1.3323.13.1.6.9.1.12 | INTEGER (0..86400) | RW | mandatory | |||||||||
column · INTEGER (0..86400) · read-write · mandatory Require minimum of 8 bytes in the RADIUS password. | |||||||||||||
| TmnPrIPIfConfTable | 1.3.6.1.4.1.3323.13.1.6.10 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table that contains configuration information about each of the radio's IP interfaces. | |||||||||||||
| RmnPrIPIfConfEntry | 1.3.6.1.4.1.3323.13.1.6.10.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Configuration information about one of the radio's IP interfaces.
| |||||||||||||
| CmnIPIfIndex | 1.3.6.1.4.1.3323.13.1.6.10.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The index for the IP Interfaces Table (these match the numbering used for these same interfaces in the MIB-II IfTable.)
| |||||||||||||
| CmnPrIPIfConfIPAddr | 1.3.6.1.4.1.3323.13.1.6.10.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory The IP address for this interface. | |||||||||||||
| CmnPrIPIfConfSubnetMask | 1.3.6.1.4.1.3323.13.1.6.10.1.3 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory The subnet mask for this interface. | |||||||||||||
| CmnPrIPIfConfRouting | 1.3.6.1.4.1.3323.13.1.6.10.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The routing protocol used on this interface.
| |||||||||||||
| CmnPrIPIfConfRoutingBit | 1.3.6.1.4.1.3323.13.1.6.10.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory A bitmap providing more information for the selected routing type. For RIP, the LSB is set if a custom advisement is to be used. | |||||||||||||
| CmnPrIPIfConfCustomAddress | 1.3.6.1.4.1.3323.13.1.6.10.1.6 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory If custom advisement is enabled for RIP, this is the address that is sent out on RIP packets for this port. | |||||||||||||
| CmnPrIPIfConfCustomSubnet | 1.3.6.1.4.1.3323.13.1.6.10.1.7 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory If custom advisement is enabled for RIP, this is the subnet that is sent out on RIP packets for this port. | |||||||||||||
| TmnPrRouteConfTable | 1.3.6.1.4.1.3323.13.1.6.11 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Static routing configuration for this radio. | |||||||||||||
| RmnPrRouteConfEntry | 1.3.6.1.4.1.3323.13.1.6.11.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Configuration information for use in creating and maintaining static routes. | |||||||||||||
| CmnPrRouteConfIndex | 1.3.6.1.4.1.3323.13.1.6.11.1.1 | INTEGER (0..50) | RO | mandatory | |||||||||
column · INTEGER (0..50) · read-only · mandatory The index of the static routing database that contains this row | |||||||||||||
| CmnPrRouteConfDest | 1.3.6.1.4.1.3323.13.1.6.11.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory The destination IP address of this route. | |||||||||||||
| CmnPrRouteConfMask | 1.3.6.1.4.1.3323.13.1.6.11.1.3 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the mnPrRouteConfDest field.
For those systems that do not support arbitrary
subnet masks, an agent constructs the value of the
mnPrRouteConfMask by determining whether
the value of the correspondent
mnPrRouteConfDest field belong to a
class-A, B, or C network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C | |||||||||||||
| CmnPrRouteConfNextHop | 1.3.6.1.4.1.3323.13.1.6.11.1.4 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) | |||||||||||||
| CmnPrRouteConfMetric | 1.3.6.1.4.1.3323.13.1.6.11.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The routing metric for this route. | |||||||||||||
| CmnPrRouteConfRowStatus | 1.3.6.1.4.1.3323.13.1.6.11.1.6 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory The status of this conceptual row in the
mnPrRouteConfTable:
active (1)
notInService (2)
notReady (3) (not setable)
createAndGo (4) (can be set, but not supported by this table)
createAndWait(5)
destroy (6)
A static route is not qualified for activation until
instances of all columns of the current row
have an appropriate value. | |||||||||||||
| TmnPrTrapConfTable | 1.3.6.1.4.1.3323.13.1.6.12 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Trap Destinations for this radio. | |||||||||||||
| RmnPrTrapConfEntry | 1.3.6.1.4.1.3323.13.1.6.12.1 | NA | mandatory | ||||||||||
| CmnTrapIndex | 1.3.6.1.4.1.3323.13.1.6.12.1.1 | INTEGER (1..5) | RO | mandatory | |||||||||
column · INTEGER (1..5) · read-only · mandatory The index of the trap destination configuration entry. | |||||||||||||
| CmnPrTrapConfTrapAddr | 1.3.6.1.4.1.3323.13.1.6.12.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory The IP address of the trap destination. | |||||||||||||
| CmnPrTrapConfTrapComm | 1.3.6.1.4.1.3323.13.1.6.12.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The trap community string to use when sending to the associated trap trap destination. | |||||||||||||
| CmnPrTrapConfRowStatus | 1.3.6.1.4.1.3323.13.1.6.12.1.4 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory The status of this conceptual row in the mnPrTrapConfTable:
active (1)
notInService (2)
notReady (3) (not setable)
createAndGo (4) (can be set, but not supported by this table)
createAndWait(5)
destroy (6)
A row is not qualified for activation until
instances of all columns of the row
have an appropriate value. | |||||||||||||
| TmnPrPPPConfTable | 1.3.6.1.4.1.3323.13.1.6.13 | NA | mandatory | ||||||||||
table · not-accessible · mandatory PPP Configuration Parameters for this radio. | |||||||||||||
| RmnPrPPPConfEntry | 1.3.6.1.4.1.3323.13.1.6.13.1 | NA | mandatory | ||||||||||
| CmnPrPPPConfBaudRate | 1.3.6.1.4.1.3323.13.1.6.13.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The baud rate for the external modem port. | |||||||||||||
| CmnPrPPPConfInitString | 1.3.6.1.4.1.3323.13.1.6.13.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The initialization string for the external modem. | |||||||||||||
| CmnPrPPPConfChapUser | 1.3.6.1.4.1.3323.13.1.6.13.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The initialization string for the external modem. | |||||||||||||
| CmnPrPPPConfChapSecret | 1.3.6.1.4.1.3323.13.1.6.13.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The CHAP secret needed to access the external modem port. | |||||||||||||
| NmnPrPerfHistConfigObjects | 1.3.6.1.4.1.3323.13.1.6.14 | ||||||||||||
| TmnPrPerfHistConfTable | 1.3.6.1.4.1.3323.13.1.6.14.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Performance History Configuration Parameters for each radio. | |||||||||||||
| RmnPrPerfHistConfEntry | 1.3.6.1.4.1.3323.13.1.6.14.1.1 | NA | mandatory | ||||||||||
| CmnPrPerfHistConfEnable | 1.3.6.1.4.1.3323.13.1.6.14.1.1.1 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory This object provides a means to administratively enable or disable the collection of Performance History data. | |||||||||||||
| CmnPrPerfHistConfInterval | 1.3.6.1.4.1.3323.13.1.6.14.1.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The number of seconds between each Performance History sample. | |||||||||||||
| CmnPrPerfHistConfFilename | 1.3.6.1.4.1.3323.13.1.6.14.1.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory This object configures the filename to be used for manual uploads of Performance History in CSV format. It also serves as the basename for automatic scheduled uploads which will append the date and time to this filename just in front of the filetype extension if any. | |||||||||||||
| CmnPrPerfHistConfUploadInterval | 1.3.6.1.4.1.3323.13.1.6.14.1.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The number of seconds to collect Performance History data before automatically uploading it in CSV format to the TFTP server. A value of 0 disables automatic uploads. | |||||||||||||
| TmnPrPerfHistConfVarTable | 1.3.6.1.4.1.3323.13.1.6.14.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Performance History Variable Configuration Parameters for each radio. | |||||||||||||
| RmnPrPerfHistConfVarEntry | 1.3.6.1.4.1.3323.13.1.6.14.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory One Performance History Variable Configuration entry. | |||||||||||||
| CmnPrPerfHistConfVarIndex | 1.3.6.1.4.1.3323.13.1.6.14.2.1.1 | INTEGER (1..32) | RO | mandatory | |||||||||
column · INTEGER (1..32) · read-only · mandatory Performance History Variable Index. | |||||||||||||
| CmnPrPerfHistConfVarName | 1.3.6.1.4.1.3323.13.1.6.14.2.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory This object displays the Performance History variable name for this record. | |||||||||||||
| CmnPrPerfHistConfVarEnable | 1.3.6.1.4.1.3323.13.1.6.14.2.1.3 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory This object provides a means to administratively enable or disable the collection of Performance History data for the selected performance variable. | |||||||||||||
| TmnPrTribE1ConfTable | 1.3.6.1.4.1.3323.13.1.6.15 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration information about each E1/DS1 tributary within this link. | |||||||||||||
| RmnPrTribE1ConfEntry | 1.3.6.1.4.1.3323.13.1.6.15.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration information about a single E1/DS1 tributary within this link.
| |||||||||||||
| CmnPrTribE1ConfLineType | 1.3.6.1.4.1.3323.13.1.6.15.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to administratively
configure the E1/DS1 line encoding state of this
tributary.
encodeHdb3B8zs(1) - Use HDB3 (E1) or B8ZS (DS1) line
encoding for the specified tributary.
encodeAmi(2) - Use AMI (E1 or DS1) line encoding for
the specified tributary.
Currently, all tributaries on a LIM are encoded as
specified for the first tributary on that LIM (trib 1 for
LIM A, trib 17 for LIM B). This will change in the future
when the hardware is capable of per tributary encoding.
| |||||||||||||
| TmnPrAuxConfTable | 1.3.6.1.4.1.3323.13.1.6.16 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters for the Auxiliary channels in the link | |||||||||||||
| RmnPrAuxConfEntry | 1.3.6.1.4.1.3323.13.1.6.16.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single Auxiliary channel within the link. Can be used to configure other similar ports in the Link, like the OW port in data mode.
| |||||||||||||
| CmnPrAuxIndex | 1.3.6.1.4.1.3323.13.1.6.16.1.1 | INTEGER (1..10) | RO | mandatory | |||||||||
column · INTEGER (1..10) · read-only · mandatory Auxiliary Channel Index. AUX1 = 1, AUX2 = 2, OW(data) = 3 | |||||||||||||
| CmnPrAuxConfBaudRate | 1.3.6.1.4.1.3323.13.1.6.16.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the baud rate used for this auxiliary channel. AUX1/AUX2 support only baud9600 and baud19200.
| |||||||||||||
| CmnPrAuxConfParity | 1.3.6.1.4.1.3323.13.1.6.16.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the parity checking for this auxiliary channel.
| |||||||||||||
| CmnPrAuxConfInversion | 1.3.6.1.4.1.3323.13.1.6.16.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the signal inversion for this auxiliary channel.
| |||||||||||||
| CmnPrAuxConfStopBits | 1.3.6.1.4.1.3323.13.1.6.16.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the number of stop bits used for this auxiliary channel.
| |||||||||||||
| TmnPrEthPortConfTable | 1.3.6.1.4.1.3323.13.1.6.17 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters for Ethernet ports in the link, particularly the auxilliary non-LIM ports. | |||||||||||||
| RmnPrEthPortConfEntry | 1.3.6.1.4.1.3323.13.1.6.17.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single Ethernet port within the link.
| |||||||||||||
| CmnPrEthPortIndex | 1.3.6.1.4.1.3323.13.1.6.17.1.1 | INTEGER (0..9999) | RO | mandatory | |||||||||
column · INTEGER (0..9999) · read-only · mandatory NMS Port Configuration Index: 1 = NMS 1 2 = NMS 2 3 = Integral Ethernet 1 4 = Integral Ethernet 2 Range potentially allows tributaries to be indexed. | |||||||||||||
| CmnPrEthPortConfSpeed | 1.3.6.1.4.1.3323.13.1.6.17.1.2 | LanSpeed | RW | mandatory | |||||||||
column · LanSpeed · read-write · mandatory This object provides a means to configure the LAN speed settings for the Ethernet ports. It allows the user to enable auto-negotiation or set the speed and duplex settings to a fixed value. | |||||||||||||
| TmnPrSwitchPlaneConfTable | 1.3.6.1.4.1.3323.13.1.6.18 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters (and control and status variables) for the switching planes in the link. A protected link contains pairs of redundant components (generally in a primary and associated secondary SPU). The pair defines a switching plane. This table has a row for every redundant component in the link. | |||||||||||||
| RmnPrSwitchPlaneConfEntry | 1.3.6.1.4.1.3323.13.1.6.18.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single redundant component within the link. | |||||||||||||
| CmnPrSwitchPlaneIndex | 1.3.6.1.4.1.3323.13.1.6.18.1.1 | INTEGER (0..9999) | RO | mandatory | |||||||||
column · INTEGER (0..9999) · read-only · mandatory Switch Configuration Index. 1 = TxMux 2 = TxMod 3 = RxDMux 4 = RxDMod etc. Range sized to allow tributaries to be indexed. | |||||||||||||
| CmnPrSwitchPlaneConfStatus | 1.3.6.1.4.1.3323.13.1.6.18.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory ..... Bit 2 (00100): 1=IS (0=OOS) Bit 3 (01000): 1=ALM Bit 4 (10000): 1=OLR
| |||||||||||||
| CmnPrSwitchPlaneConfOnlineReq | 1.3.6.1.4.1.3323.13.1.6.18.1.3 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory ..... | |||||||||||||
| TmnPrDpmCiConfTable | 1.3.6.1.4.1.3323.13.1.6.19 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters (and status variables) for DPM Channel Interfaces. | |||||||||||||
| RmnPrDpmCiConfEntry | 1.3.6.1.4.1.3323.13.1.6.19.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single DPM Channel Interface within the link.
| |||||||||||||
| CmnPrDpmCiIndex | 1.3.6.1.4.1.3323.13.1.6.19.1.1 | INTEGER (10001..42999) | RO | mandatory | |||||||||
| CmnPrDpmCiConfType | 1.3.6.1.4.1.3323.13.1.6.19.1.2 | INTEGER | RO | mandatory | |||||||||
| CmnPrDpmCiConfFullName | 1.3.6.1.4.1.3323.13.1.6.19.1.3 | DisplayString | RO | mandatory | |||||||||
| CmnPrDpmCiConfSharpCapable | 1.3.6.1.4.1.3323.13.1.6.19.1.4 | TruthValue | RO | mandatory | |||||||||
| CmnPrDpmCiConfActCgName | 1.3.6.1.4.1.3323.13.1.6.19.1.5 | DisplayString | RO | mandatory | |||||||||
| CmnPrDpmCiConfActSharpEnabled | 1.3.6.1.4.1.3323.13.1.6.19.1.6 | TruthValue | RO | mandatory | |||||||||
| CmnPrDpmCiConfActOtherIntf | 1.3.6.1.4.1.3323.13.1.6.19.1.7 | DisplayString | RO | mandatory | |||||||||
| CmnPrDpmCiConfPropAvailable | 1.3.6.1.4.1.3323.13.1.6.19.1.8 | TruthValue | RO | mandatory | |||||||||
| CmnPrDpmCiConfPropCgName | 1.3.6.1.4.1.3323.13.1.6.19.1.9 | DisplayString | RW | mandatory | |||||||||
| CmnPrDpmCiConfPropSharpEnabled | 1.3.6.1.4.1.3323.13.1.6.19.1.10 | TruthValue | RW | mandatory | |||||||||
| CmnPrDpmCiConfPropOtherIntf | 1.3.6.1.4.1.3323.13.1.6.19.1.11 | DisplayString | RW | mandatory | |||||||||
| TmnPrDpmCgConfTable | 1.3.6.1.4.1.3323.13.1.6.20 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters (and status variables) for DPM Channel Groups. | |||||||||||||
| RmnPrDpmCgConfEntry | 1.3.6.1.4.1.3323.13.1.6.20.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single DPM Channel Group within the link.
| |||||||||||||
| CmnPrDpmCgIndex | 1.3.6.1.4.1.3323.13.1.6.20.1.1 | INTEGER (1..1999) | RO | mandatory | |||||||||
| CmnPrDpmCgConfName | 1.3.6.1.4.1.3323.13.1.6.20.1.2 | DisplayString | RW | mandatory | |||||||||
| CmnPrDpmCgConfType | 1.3.6.1.4.1.3323.13.1.6.20.1.3 | INTEGER | RW | mandatory | |||||||||
| CmnPrDpmCgConfCount | 1.3.6.1.4.1.3323.13.1.6.20.1.4 | INTEGER | RW | mandatory | |||||||||
| CmnPrDpmCgConfChMinRate | 1.3.6.1.4.1.3323.13.1.6.20.1.6 | INTEGER | RO | mandatory | |||||||||
| CmnPrDpmCgConfChMaxRate | 1.3.6.1.4.1.3323.13.1.6.20.1.7 | INTEGER | RO | mandatory | |||||||||
| CmnPrDpmCgConfChAllocRate | 1.3.6.1.4.1.3323.13.1.6.20.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Capacity of the channels in this channel group (bits/sec) | |||||||||||||
| CmnPrDpmCgConfIntf1 | 1.3.6.1.4.1.3323.13.1.6.20.1.9 | DisplayString | RO | mandatory | |||||||||
| CmnPrDpmCgConfSharpEnabled1 | 1.3.6.1.4.1.3323.13.1.6.20.1.10 | TruthValue | RW | mandatory | |||||||||
| CmnPrDpmCgConfIntf2 | 1.3.6.1.4.1.3323.13.1.6.20.1.11 | DisplayString | RO | mandatory | |||||||||
| CmnPrDpmCgConfSharpEnabled2 | 1.3.6.1.4.1.3323.13.1.6.20.1.12 | TruthValue | RW | mandatory | |||||||||
| CmnPrDpmCgConfRowStatus | 1.3.6.1.4.1.3323.13.1.6.20.1.13 | RowStatus | RW | mandatory | |||||||||
| TmnPrSHARPChanTable | 1.3.6.1.4.1.3323.13.1.6.21 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters (and status variables) for SHARP Channels. | |||||||||||||
| RmnPrSHARPChanEntry | 1.3.6.1.4.1.3323.13.1.6.21.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single SHARP Channel within the link.
| |||||||||||||
| CmnPrSHARPChanStatus | 1.3.6.1.4.1.3323.13.1.6.21.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||
| CmnPrSHARPChanActiveChan | 1.3.6.1.4.1.3323.13.1.6.21.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||
| CmnPrSHARPChanMasterBER | 1.3.6.1.4.1.3323.13.1.6.21.1.3 | SHARPBERStatus | RO | mandatory | |||||||||
| CmnPrSHARPChanSlaveBER | 1.3.6.1.4.1.3323.13.1.6.21.1.4 | SHARPBERStatus | RO | mandatory | |||||||||
| CmnPrSHARPChanEnable | 1.3.6.1.4.1.3323.13.1.6.21.1.6 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||
| CmnPrSHARPChanSwitchMode | 1.3.6.1.4.1.3323.13.1.6.21.1.7 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||
| CmnPrSHARPChanMasterThresh | 1.3.6.1.4.1.3323.13.1.6.21.1.8 | SHARPBERThresh | RW | mandatory | |||||||||
| CmnPrSHARPChanSlaveThresh | 1.3.6.1.4.1.3323.13.1.6.21.1.9 | SHARPBERThresh | RW | mandatory | |||||||||
| CmnPrSHARPChanManualForce | 1.3.6.1.4.1.3323.13.1.6.21.1.10 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory (The 'OperNA' values don't generate alarms. For cases when a channel needs to be forced long-term, for operational (not diagnostic) reasons.)
| |||||||||||||
| CmnPrSHARPChanSwitchPref | 1.3.6.1.4.1.3323.13.1.6.21.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||
| TmnPrTribXConfTable | 1.3.6.1.4.1.3323.13.1.6.22 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration and other information about each tributary within this link. This table uses DPM CI (RLTTT) indexing, to allow access to more than 99 tributaries. Some of the objects in this table are expanded versions of other tributary-related objects in the MIB, inserted here to allow access to tributaries beyond #99. | |||||||||||||
| RmnPrTribXConfEntry | 1.3.6.1.4.1.3323.13.1.6.22.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration information about a single tributary within this link.
| |||||||||||||
| CmnPrTribXConfAdminEquipped | 1.3.6.1.4.1.3323.13.1.6.22.1.1 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory This object provides a means to administratively configure the provisioned equipment state of this tributary. If the tributary is not equipped, it will generate no alarms. | |||||||||||||
| CmnPrTribXConfLineType | 1.3.6.1.4.1.3323.13.1.6.22.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to administratively
configure the E1/DS1 line encoding state of this
tributary.
encodeHdb3B8zs(1) - Use HDB3 (E1) or B8ZS (DS1) line
encoding for the specified tributary.
encodeAmi(2) - Use AMI (E1 or DS1) line encoding for
the specified tributary.
| |||||||||||||
| CmnPrTribXConfLocalLoopback | 1.3.6.1.4.1.3323.13.1.6.22.1.3 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory If set to 'True', enables tributary local loopback (loops incoming tributary signal back out to customer equipment.) | |||||||||||||
| CmnPrTribXConfRemoteLoopback | 1.3.6.1.4.1.3323.13.1.6.22.1.4 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory If set to 'True', enables tributary remote loopback (loops outgoing tributary signal back into tributary.) | |||||||||||||
| CmnPrTribXConfTribStatus | 1.3.6.1.4.1.3323.13.1.6.22.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Tributary Status bits. Bit 0: ... Bit 14 - 31: reserved | |||||||||||||
| TmnPrEthSwTable | 1.3.6.1.4.1.3323.13.1.6.23 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing information about each Ethernet switch within the link. | |||||||||||||
| RmnPrEthSwEntry | 1.3.6.1.4.1.3323.13.1.6.23.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The information for a single Ethernet switch within the link.
| |||||||||||||
| CmnPrEthSwIndex | 1.3.6.1.4.1.3323.13.1.6.23.1.1 | INTEGER (1..9) | RO | mandatory | |||||||||
| CmnPrEthSwStatRRPStatus | 1.3.6.1.4.1.3323.13.1.6.23.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||
| CmnPrEthSwConfRRPMode | 1.3.6.1.4.1.3323.13.1.6.23.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||
| CmnPrEthSwConfRRPPollInterval | 1.3.6.1.4.1.3323.13.1.6.23.1.4 | INTEGER (10..10000) | RW | mandatory | |||||||||
| CmnPrEthSwConfRRPThreshold | 1.3.6.1.4.1.3323.13.1.6.23.1.5 | INTEGER (50..50000) | RW | mandatory | |||||||||
| CmnPrEthSwConfRRPFwdDelay | 1.3.6.1.4.1.3323.13.1.6.23.1.6 | INTEGER (10..10000) | RW | mandatory | |||||||||
| CmnPrEthSwConfRRPRingID | 1.3.6.1.4.1.3323.13.1.6.23.1.7 | DisplayString | RW | mandatory | |||||||||
| TmnPrAcmTable | 1.3.6.1.4.1.3323.13.1.6.24 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration parameters and other information related to the ACM facility on each radio. | |||||||||||||
| RmnPrAcmEntry | 1.3.6.1.4.1.3323.13.1.6.24.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The ACM paramters/information for a single radio within the link.
| |||||||||||||
| CmnPrAcmModeProp | 1.3.6.1.4.1.3323.13.1.6.24.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Proposed ACM Mode
| |||||||||||||
| CmnPrAcmModeConf | 1.3.6.1.4.1.3323.13.1.6.24.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Current ACM Mode
| |||||||||||||
| CmnPrAcmMaxCapProp | 1.3.6.1.4.1.3323.13.1.6.24.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Proposed Maximum ACM Capacity (in kbps). After a sucessful evaluation, a subsequent activation sets mnPrAcmMaxCapConf to the value of mnPrAcmMaxCapProp. | |||||||||||||
| CmnPrAcmMaxCapConf | 1.3.6.1.4.1.3323.13.1.6.24.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Current Maximum ACM Capacity (in kbps). Ignored if ACM is off. If ACM is on, this value, if greater than Station License Capacity, takes precedence over Station License Capacity and can result in a total capacity that is GREATER than SL Capacity. | |||||||||||||
| CmnPrAcmMinEthThreshProp | 1.3.6.1.4.1.3323.13.1.6.24.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Proposed ACM Minimum Ethernet Threshold (in kbps): PDH traffic is dropped if necessary to keep Ethernet capacity at this level. | |||||||||||||
| CmnPrAcmMinEthThreshConf | 1.3.6.1.4.1.3323.13.1.6.24.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Current ACM Minimum Ethernet Threshold (in kbps): PDH traffic is dropped if necessary to keep Ethernet capacity at this level. | |||||||||||||
| CmnPrAcmTxPower | 1.3.6.1.4.1.3323.13.1.6.24.1.7 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory ACM Tx Power | |||||||||||||
| CmnPrAcmMaxTxPower | 1.3.6.1.4.1.3323.13.1.6.24.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory ACM Maximum Tx Power | |||||||||||||
| CmnPrAcmProfileHeader | 1.3.6.1.4.1.3323.13.1.6.24.1.9 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The column headers that line up with the textual columns embedded in the mnPrAcmProfileText column in the ACM Profile Table. | |||||||||||||
| TmnPrAcmProfileTable | 1.3.6.1.4.1.3323.13.1.6.25 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing information about each current ACM profile for each radio within the link. | |||||||||||||
| RmnPrAcmProfileEntry | 1.3.6.1.4.1.3323.13.1.6.25.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The information for a single ACM Profile on a single radio. | |||||||||||||
| CmnPrAcmProfileIndex | 1.3.6.1.4.1.3323.13.1.6.25.1.1 | INTEGER (1..1024) | RO | mandatory | |||||||||
column · INTEGER (1..1024) · read-only · mandatory The index for this entry. | |||||||||||||
| CmnPrAcmProfileText | 1.3.6.1.4.1.3323.13.1.6.25.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory All the information about the profile as one text string. | |||||||||||||
| TmnPrRADSrvConfTable | 1.3.6.1.4.1.3323.13.1.6.26 | NA | mandatory | ||||||||||
table · not-accessible · mandatory RADIUS Servers for this radio. | |||||||||||||
| RmnPrRADSrvConfEntry | 1.3.6.1.4.1.3323.13.1.6.26.1 | NA | mandatory | ||||||||||
| CmnPrRADSrvIndex | 1.3.6.1.4.1.3323.13.1.6.26.1.1 | INTEGER (1..8) | RO | mandatory | |||||||||
column · INTEGER (1..8) · read-only · mandatory The index of the RADIUS Server configuration entry. | |||||||||||||
| CmnPrRADSrvConfName | 1.3.6.1.4.1.3323.13.1.6.26.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The name of the RADIUS Server. Initially IPv4 address but other formats may be supported in the future. | |||||||||||||
| CmnPrRADSrvConfAuthPort | 1.3.6.1.4.1.3323.13.1.6.26.1.3 | INTEGER (1024..65535) | RW | mandatory | |||||||||
column · INTEGER (1024..65535) · read-write · mandatory The UDP port to use for the RADIUS authentication service. The default is 1812. | |||||||||||||
| CmnPrRADSrvConfSecret | 1.3.6.1.4.1.3323.13.1.6.26.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The shared secret to use to authenticate the radio with the RADIUS Server. | |||||||||||||
| TmnPrRRPPTable | 1.3.6.1.4.1.3323.13.1.6.27 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing information about each RRP+ ring supported by this link. | |||||||||||||
| RmnPrRRPPEntry | 1.3.6.1.4.1.3323.13.1.6.27.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The information for a single RRP+ ring supported by this link.
| |||||||||||||
| CmnPrRRPPIndex | 1.3.6.1.4.1.3323.13.1.6.27.1.1 | INTEGER (1..10) | RO | mandatory | |||||||||
column · INTEGER (1..10) · read-only · mandatory This is also the ring number... | |||||||||||||
| CmnPrRRPPRowStatus | 1.3.6.1.4.1.3323.13.1.6.27.1.2 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory The status of this conceptual row in the mnPrRRPPTable:
active (1)
notInService (2)
notReady (3) (not setable, result of failure to go active)
createAndGo (4) (can be set, but not supported by this table)
createAndWait(5)
destroy (6)
A row is not qualified for activation until
instances of all columns of the row
have an appropriate value. | |||||||||||||
| CmnPrRRPPStatus | 1.3.6.1.4.1.3323.13.1.6.27.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||
| CmnPrRRPPConfMode | 1.3.6.1.4.1.3323.13.1.6.27.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||
| CmnPrRRPPConfPollInterval | 1.3.6.1.4.1.3323.13.1.6.27.1.5 | INTEGER (10..10000) | RW | mandatory | |||||||||
| CmnPrRRPPConfThreshold | 1.3.6.1.4.1.3323.13.1.6.27.1.6 | INTEGER (50..50000) | RW | mandatory | |||||||||
| CmnPrRRPPConfFwdDelay | 1.3.6.1.4.1.3323.13.1.6.27.1.7 | INTEGER (10..10000) | RW | mandatory | |||||||||
| CmnPrRRPPConfLdpVlan | 1.3.6.1.4.1.3323.13.1.6.27.1.8 | INTEGER (1..4094) | RW | mandatory | |||||||||
column · INTEGER (1..4094) · read-write · mandatory The VLAN ID used for this ring's LDP packets. | |||||||||||||
| CmnPrRRPPConfRingPort1 | 1.3.6.1.4.1.3323.13.1.6.27.1.9 | INTEGER (1..21) | RW | mandatory | |||||||||
column · INTEGER (1..21) · read-write · mandatory 1-based port number of the lower-numbered ring port. | |||||||||||||
| CmnPrRRPPConfRingPort2 | 1.3.6.1.4.1.3323.13.1.6.27.1.10 | INTEGER (1..21) | RW | mandatory | |||||||||
column · INTEGER (1..21) · read-write · mandatory 1-based port number of the higher-numbered ring port. | |||||||||||||
| CmnPrRRPPConfProtVlans | 1.3.6.1.4.1.3323.13.1.6.27.1.11 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Human-readable list of protected VLAN IDs for this ring, separated by commas. Sample: '101,102' | |||||||||||||
| CmnPrRRPPConfADPorts | 1.3.6.1.4.1.3323.13.1.6.27.1.12 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Human-readable list of Add-Drop ports for this ring on this terminal, separated by commas. Sample: 'E2-A(101),N1-A(101),N2-A(102)' where E2=Eth2, A=Access (T=trunk), 101=VLAN ID. | |||||||||||||
| CmnPrRRPPADPortAvailability | 1.3.6.1.4.1.3323.13.1.6.27.1.13 | Display64 | RO | mandatory | |||||||||
column · Display64 · read-only · mandatory 64-bit unsigned integer that consists of 32 2-bit fields where each field represents how a particular Ethernet port can be used as an Add/Drop port for the ring in question. The least-significant field (bits 1 and 0) corresponds to port 1 (Eth1). Conventional 1-based port numbers (indexes) are used, so the first 7 ports are: 1: Eth1 2: Eth2 3: NMS1 4: NMS2 5: Xover 6: CPU 7: Link The values within the 2-bit fields have the following meanings: 0: Port is unavailable for this ring 1: Port can be used only as a trunk mode A/D port for this ring 2: Port can be used only as an access mode A/D port for this ring (not used) 3: Port can be used as either a trunk mode or access mode A/D port As with other read-only 64-bit unsigned objects, the object is an ASCII string representation of a decimal number representing a 64-bit unsigned number. | |||||||||||||
| TmnPrCUConfTable | 1.3.6.1.4.1.3323.13.1.6.28 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing various general configuration parameters for each channel unit (radio) within the link. For MX objects only. | |||||||||||||
| RmnPrCUConfEntry | 1.3.6.1.4.1.3323.13.1.6.28.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of general configuration information for a single channel unit (radio) within the link.
| |||||||||||||
| CmnPrCUConfRRPPLLFHysterSetTime | 1.3.6.1.4.1.3323.13.1.6.28.1.1 | INTEGER (0..3600) | RW | mandatory | |||||||||
column · INTEGER (0..3600) · read-write · mandatory Number of seconds to require that BER 10^-6 condition must be true before the associated alarm is set, thus affecting LLF and thus RRP+. Can be used to keep a fluttering BER 10^-6 condition from causing frequent RRP+ ring changes. Note that if there is a hard break elsewhere in the ring, we will not let fluttering BER break the ring at a second place. | |||||||||||||
| CmnPrCUConfRRPPLLFHysterClrTime | 1.3.6.1.4.1.3323.13.1.6.28.1.2 | INTEGER (0..3600) | RW | mandatory | |||||||||
column · INTEGER (0..3600) · read-write · mandatory Number of seconds to require that BER 10^-6 condition must be false before the associated alarm is cleared, thus affecting LLF and thus RRP+. Can be used to keep a fluttering BER 10^-6 condition from causing frequent RRP+ ring changes. Note that if there is a hard break elsewhere in the ring, we will not let fluttering BER break the ring at a second place. | |||||||||||||
| NmnPrUtilityObjects | 1.3.6.1.4.1.3323.13.1.7 | ||||||||||||
| TmnPrSCPCtlTable | 1.3.6.1.4.1.3323.13.1.7.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table that controls the System Command Processor for each radio in the link. | |||||||||||||
| RmnPrSCPCtlEntry | 1.3.6.1.4.1.3323.13.1.7.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of System Command Processor control information for a single radio within the link.
| |||||||||||||
| CmnPrSCPCtlCmd | 1.3.6.1.4.1.3323.13.1.7.1.1.1 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The system command control object for this radio. Setting this object to a value other than `idle' (1) has the side effect of invoking the associated system command. When read, the value of this object provides an indication of the currently invoked system control command, if any. The value of this object returns to `idle' (1) when the invoked command has completed execution. Writing 'idle' to the object will cancel the command that is in progress. Whenever the value of this object is not `idle', attempts to write a value to this object other than 'idle' will return an error.
| |||||||||||||
| CmnPrSCPCtlCmdStringArg | 1.3.6.1.4.1.3323.13.1.7.1.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory A string argument used by the System Command Processor. Can be used for a filename, for example. | |||||||||||||
| CmnPrSCPCtlCmdNumArg | 1.3.6.1.4.1.3323.13.1.7.1.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory A numeric argument used by the System Command Processor. | |||||||||||||
| CmnPrSCPCtlCmdProgress | 1.3.6.1.4.1.3323.13.1.7.1.1.4 | INTEGER (0..100) | RO | mandatory | |||||||||
column · INTEGER (0..100) · read-only · mandatory This object provides an indication of the progress of the current system command. The value returned by this object is a percentage representing the approximate percentage of the estimated total command time that has elapsed. If the current value of the mnPrSCPCtlCmd object is `idle' the value of this object is zero(0). | |||||||||||||
| CmnPrSCPCtlCmdResult | 1.3.6.1.4.1.3323.13.1.7.1.1.5 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The system control command result. The enumerated values are interpreted as follows: `inProgress' - The system command is still in progress. `success' - The system command completed successfully. `failure' - The system command did not complete, or completed with errors. `aborted' - The system command was cancelled by the user (by writing 'idle' to mnPrSCPCtlCmd).
| |||||||||||||
| TmnPrDiagSnapTable | 1.3.6.1.4.1.3323.13.1.7.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table that allows management applications to dump binary diagnostic snapshot data from various sources in the modem (and potentially from non-modem sources in the future). | |||||||||||||
| RmnPrDiagSnapEntry | 1.3.6.1.4.1.3323.13.1.7.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of Diagnostic Snapshot objects for a single radio within the link.
| |||||||||||||
| CmnPrDiagSnapBuffer | 1.3.6.1.4.1.3323.13.1.7.2.1.1 | OCTET STRING (SIZE (512)) | RO | mandatory | |||||||||
column · OCTET STRING (SIZE (512)) · read-only · mandatory This is the object that returns the snapshot data.
If mnPrDiagSnapSource's value is the default ('none(1)'), then
this object returns an octet string containing two zero bytes,
with no other side-effects. This ensures that get-nexting
through the table will not cause any diagnostic snapshotting and
will not result in SNMP failures.
If mnPrDiagSnapSource's value is not 'none(1)', then a get to
the object will return the next 512 bytes of the entire snapshot
(or less, if there is not at least 512 bytes left to transfer.)
When there is no more data to transfer, a get will result in
an SNMP error, and mnPrDiagSnapSource will then be set back to
'none(1)'. | |||||||||||||
| CmnPrDiagSnapSource | 1.3.6.1.4.1.3323.13.1.7.2.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object selects the source of the diagnostic snapshot (and also implicitly activates the diagnostic snapshot facility). An application seeking to do a diagnostic snapshot should first confirm that this object is set to 'none(1)', which means that no other application/user is using the facility. Then the application should attempt to set this object to specify the requested source. If the result of that set operation is successful, then the application can continue and read data from mnPrDiagSnapBuffer. If the result of the set operation is a failure, the application should back off and wait until this object is 'none(1)' again. If the diagnostic snapshot facility is activated, but there is no get or set activity to its object for 10 seconds, this object will return to 'none(1)'. To cancel a diagnostic snapshot, an application can set this object to 'none(1)'.
| |||||||||||||
| CmnPrDiagSnapOverride | 1.3.6.1.4.1.3323.13.1.7.2.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Under some circumstances, a snapshot dump can have side-effects that affect customer traffic on the link. By default, the diagnostic snapshot facility will reject snapshot requests that will have these negative effects. If an application wants to perform the snapshot anyway, it must set this object to 'override(2)'. Doing so will also set the minor 'Modem DSP Sample Override' alarm.
| |||||||||||||
| NmnPrVlanObjects | 1.3.6.1.4.1.3323.13.1.8 | ||||||||||||
| TmnPrVlanDeviceConfTable | 1.3.6.1.4.1.3323.13.1.8.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration information about each VLAN-capable device within this link. | |||||||||||||
| RmnPrVlanDeviceConfEntry | 1.3.6.1.4.1.3323.13.1.8.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration information about a single Vlan device within this link.
| |||||||||||||
| CmnPrVlanDeviceCapabilities | 1.3.6.1.4.1.3323.13.1.8.1.1.1 | OCTET STRING | RO | mandatory | |||||||||
column · OCTET STRING · read-only · mandatory Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in mnPrPortCapabilities. This maps directly to dot1dDeviceCapabilities. | |||||||||||||
| CmnPrVlanDeviceTfcClsEnabled | 1.3.6.1.4.1.3323.13.1.8.1.1.2 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic. Maps directly to dot1dTrafficClassesEnabled. | |||||||||||||
| CmnPrVlanDeviceNumTrafficClasses | 1.3.6.1.4.1.3323.13.1.8.1.1.3 | INTEGER (1..8) | RO | mandatory | |||||||||
column · INTEGER (1..8) · read-only · mandatory The number of egress traffic classes supported on this device. This object may optionally be read-only. On this device, it is set to 4. Maps to dot1dPortNumTrafficClasses, but is reported per device instead of per port. | |||||||||||||
| CmnPrVlanTrafficClassOrder | 1.3.6.1.4.1.3323.13.1.8.1.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory When mnPrVlanDeviceTrafficClassesEnabled is true, this will tell the device in what order to look at incomming packets for sorting into traffic classes. For example, if option 1 is selected, the device will first look at the VLAN tag containing IEEE 802.1p information if present, else it will look at the IPv4 Type of Service field or the IPv6 Traffic Classes field if present, else it will use the default priority determined by mnPrVLANPortDefaultUserPriority. If option 5 is selected, the device will only look at the default priority for the port.
| |||||||||||||
| CmnPrVlanTrafficClassWieghted | 1.3.6.1.4.1.3323.13.1.8.1.1.5 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory When mnPrVlanDeviceTrafficClassesEnabled is true, this will tell the device how to handle egressing packets based upon traffic class. When false(2), it will output all high priority packets before outputing any lower priority packets. When true(1), it will output based on an 8-4-2-1 packet wieghting scheme based upon traffic class. | |||||||||||||
| CmnPrVlanDeviceVlanVersionNumber | 1.3.6.1.4.1.3323.13.1.8.1.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The version number of IEEE 802.1Q that this device supports. Maps directly to dot1qVlanVersionNumber.
| |||||||||||||
| CmnPrVlanDeviceMaxVlanId | 1.3.6.1.4.1.3323.13.1.8.1.1.7 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The maximum IEEE 802.1Q VLAN ID that this device supports. Maps directly to dot1qMaxVlanId. | |||||||||||||
| CmnPrVlanDeviceMaxSupportedVlans | 1.3.6.1.4.1.3323.13.1.8.1.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The maximum number of IEEE 802.1Q VLANs that this device supports. Maps directly to dot1qMaxSupportedVlans | |||||||||||||
| CmnPrVlanDeviceNumVlans | 1.3.6.1.4.1.3323.13.1.8.1.1.9 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The current number of IEEE 802.1Q VLANs that are configured in this device. Maps directly to dot1qNumVlans | |||||||||||||
| CmnPrVlanDeviceNumDeletes | 1.3.6.1.4.1.3323.13.1.8.1.1.10 | Counter32 | RO | mandatory | |||||||||
column · Counter32 · read-only · mandatory The number of times a VLAN entry has been deleted from the mnPr1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. Maps directly to dot1qVlanNumDeletes. | |||||||||||||
| CmnPrVlanDeviceLinkLossForwarding | 1.3.6.1.4.1.3323.13.1.8.1.1.11 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Determines how the device ports should behave when the microwave link is lost. If no_llf(1) is selected, then the device will continue to operate. If total_llf(2) is selected, then all ports on the device will be disabled. If link_port_only(3) is selected, then data will no longer be sent to the link port, but the other ports will remain active. This is useful if you are switching data locally. totalLlfFeLos(4) is like totalLlf(2), but also acts if the far end LIM sees a LOS (if all ports are in LOS state).
| |||||||||||||
| CmnPrVlanDevice1qEnabled | 1.3.6.1.4.1.3323.13.1.8.1.1.12 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory Enables the device for 802.1Q VLANS. If it is false(2), the device operates as a simple transperant bridge. | |||||||||||||
| CmnPrVlanDeviceIgnoreTags | 1.3.6.1.4.1.3323.13.1.8.1.1.13 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory Tells the device to ignore any incoming tags. All tags will have the default VLAN-Id for its ingress port associcated with it. The original tag will be kept in tact, and a second tag will be added. | |||||||||||||
| CmnPrVlanDeviceRateLimitUnit | 1.3.6.1.4.1.3323.13.1.8.1.1.14 | INTEGER (0..100000) | RO | mandatory | |||||||||
column · INTEGER (0..100000) · read-only · mandatory ... | |||||||||||||
| CmnPrVlanDeviceLinkUntagEnable | 1.3.6.1.4.1.3323.13.1.8.1.1.15 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory ... | |||||||||||||
| CmnPrVlanDeviceLinkFrameMode | 1.3.6.1.4.1.3323.13.1.8.1.1.16 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Normal (Customer Port, Single VLAN tagging) Provider (Q-in-Q) ...
| |||||||||||||
| TmnPrVlanPortConfTable | 1.3.6.1.4.1.3323.13.1.8.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing configuration information about each VLAN-capable port within this link. | |||||||||||||
| RmnPrVlanPortConfEntry | 1.3.6.1.4.1.3323.13.1.8.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration information about a single VLAN port within this link.
| |||||||||||||
| CmnPrVlanPortCapabilities | 1.3.6.1.4.1.3323.13.1.8.2.1.1 | OCTET STRING | RO | mandatory | |||||||||
column · OCTET STRING · read-only · mandatory Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB. Maps directly to dot1dPortCapabilities. | |||||||||||||
| CmnPrVlanPortDefaultUserPriority | 1.3.6.1.4.1.3323.13.1.8.2.1.2 | INTEGER (0..7) | RW | mandatory | |||||||||
column · INTEGER (0..7) · read-write · mandatory The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. Maps directly to dot1dPortDefaultUserPriority | |||||||||||||
| CmnPrVlanPortPvid | 1.3.6.1.4.1.3323.13.1.8.2.1.3 | INTEGER (1..4094) | RW | mandatory | |||||||||
column · INTEGER (1..4094) · read-write · mandatory The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. Maps directly to dot1qPvid. | |||||||||||||
| CmnPrVlanPortAcceptableFrameTypes | 1.3.6.1.4.1.3323.13.1.8.2.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for this port. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP. On Proteus AMT, this can only be set to admitAll(1). Maps directly to dot1qPortAcceptableFrameTypes.
| |||||||||||||
| CmnPrVlanPortIngressFiltering | 1.3.6.1.4.1.3323.13.1.8.2.1.5 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP. Maps directly to dot1qPortIngressFiltering | |||||||||||||
| CmnPrVlanPortGvrpStatus | 1.3.6.1.4.1.3323.13.1.8.2.1.6 | TruthValue | RO | mandatory | |||||||||
column · TruthValue · read-only · mandatory The state of GVRP operation on this port. The value true(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When false(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from false(2) to true(1) will cause a reset of all GVRP state machines on this port. On Proteus AMT, this is always false(2). | |||||||||||||
| CmnPrVlanPortLineSpeed | 1.3.6.1.4.1.3323.13.1.8.2.1.9 | LanSpeed | RW | mandatory | |||||||||
column · LanSpeed · read-write · mandatory The speed of this port. It can either Auto-negotiate with the link partner (1), be set to half-duplex 10 BaseT(2), half-duplex 100 BaseT(3), full-duplex 100 BaseT(4), full-duplex 10 BaseT(6), full-duplex 1000 BaseT(7) or powered down (5). | |||||||||||||
| CmnPrVlanPortRateLimitPri0 | 1.3.6.1.4.1.3323.13.1.8.2.1.10 | RateLimit | RW | mandatory | |||||||||
column · RateLimit · read-write · mandatory The ingress rate limit for priority 0 frames on this port. Note that the valid values are 100 Mbps (no limiting), 128 kbps, 256 kbps, 512 kbps, 1 mbps, 2 mbps, 4 mbps, or 8 mbps are the only valid values. 16, 32, and 64 mbps are not available for priority 0 packets. | |||||||||||||
| CmnPrVlanPortRateLimitPri1 | 1.3.6.1.4.1.3323.13.1.8.2.1.11 | RateLimit | RW | mandatory | |||||||||
column · RateLimit · read-write · mandatory The rate limit for priority 1 frames on this port. Note that the valid values are either the same value as priority 0 packets or twice the value of priority 0 packets. All other set attempts will be rejected. Also, this value will change if mnPrVlanPortRateLimitPri0 changes. | |||||||||||||
| CmnPrVlanPortRateLimitPri2 | 1.3.6.1.4.1.3323.13.1.8.2.1.12 | RateLimit | RW | mandatory | |||||||||
column · RateLimit · read-write · mandatory The rate limit for priority 2 frames on this port. Note that the valid values are either the same value as priority 1 packets or twice the value of priority 1 packets. All other set attempts will be rejected. Also, this value will change if mnPrVlanPortRateLimitPri1 changes. | |||||||||||||
| CmnPrVlanPortRateLimitPri3 | 1.3.6.1.4.1.3323.13.1.8.2.1.13 | RateLimit | RW | mandatory | |||||||||
column · RateLimit · read-write · mandatory The rate limit for priority 3 frames on this port. Note that the valid values are either the same value as priority 2 packets or twice the value of priority 2 packets. All other set attempts will be rejected. Also, this value will change if mnPrVlanPortRateLimitPri2 changes. | |||||||||||||
| CmnPrVlanPortUntagEnable | 1.3.6.1.4.1.3323.13.1.8.2.1.14 | TruthValue | RW | mandatory | |||||||||
column · TruthValue · read-write · mandatory ... | |||||||||||||
| CmnPrVlanPortMaxFrameSize | 1.3.6.1.4.1.3323.13.1.8.2.1.15 | INTEGER (1518..10240) | RW | mandatory | |||||||||
column · INTEGER (1518..10240) · read-write · mandatory ... | |||||||||||||
| CmnPrVlanPortRateLimitMult | 1.3.6.1.4.1.3323.13.1.8.2.1.16 | INTEGER (0..31) | RW | mandatory | |||||||||
column · INTEGER (0..31) · read-write · mandatory ... | |||||||||||||
| CmnPrVlanPortRateControlMode | 1.3.6.1.4.1.3323.13.1.8.2.1.17 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory ...
| |||||||||||||
| CmnPrVlanPortFrameMode | 1.3.6.1.4.1.3323.13.1.8.2.1.18 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Normal (Customer Port, Single VLAN tagging) Provider (Q-in-Q) ...
| |||||||||||||
| CmnPrVlanPortIngressFilterMode | 1.3.6.1.4.1.3323.13.1.8.2.1.20 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory ...
| |||||||||||||
| CmnPrVlanPortIngressRateLimit | 1.3.6.1.4.1.3323.13.1.8.2.1.21 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Port Ingress Rate Limit (in kbps) for MX ports. If set to 0, there is no ingress rate limiting. This is the 'leaky bucket' leak rate. | |||||||||||||
| CmnPrVlanPortIngressBurstAlloc | 1.3.6.1.4.1.3323.13.1.8.2.1.22 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Size of allowable traffic burst (in kbits) for MX ports. This is the size of the 'leaky bucket'. If set to 0, default ingress buffers still allow some burstiness. | |||||||||||||
| CmnPrVlanPortLearningMode | 1.3.6.1.4.1.3323.13.1.8.2.1.23 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Learning Mode for MX Ethernet port. Originally, learning was always enabled. This object allows learning to be disabled in the rare cases where that might be useful.
| |||||||||||||
| CmnPrVlanPortFloodMode | 1.3.6.1.4.1.3323.13.1.8.2.1.24 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Flood Mode for MX Ethernet port. Allows flood mode for each Ethernet port to be set to non-default values in the rare cases where that might be useful.
| |||||||||||||
| CmnPrVlanPortEthertype | 1.3.6.1.4.1.3323.13.1.8.2.1.25 | INTEGER (0..65535) | RW | mandatory | |||||||||
| TmnPr1qVlanCurrentTable | 1.3.6.1.4.1.3323.13.1.8.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. Maps directly to dot1qVlanCurrentTable. | |||||||||||||
| RmnPr1qVlanCurrentEntry | 1.3.6.1.4.1.3323.13.1.8.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. Maps directly to dot1qVlanCurrentEntry, but is indexed on a (1..64) basis instead of VlanId
| |||||||||||||
| CmnPr1qVlanIndex | 1.3.6.1.4.1.3323.13.1.8.3.1.1 | INTEGER (1..4094) | NA | mandatory | |||||||||
column · INTEGER (1..4094) · not-accessible · mandatory The identifier refering to this VLAN. Maps directly to dot1qVlanIndex, but is not equivalent to the VLAN-ID. | |||||||||||||
| CmnPr1qVlanId | 1.3.6.1.4.1.3323.13.1.8.3.1.2 | INTEGER (1..4094) | RO | mandatory | |||||||||
column · INTEGER (1..4094) · read-only · mandatory The VLAN-ID associated with this VLAN. | |||||||||||||
| CmnPr1qVlanFdbId | 1.3.6.1.4.1.3323.13.1.8.3.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in dot1qLearningConstraintsTable. Since ther is only one filtering database on Proteus AMT, this value will always be 1. Maps directly to dot1qVlanFdbId. | |||||||||||||
| CmnPr1qVlanCurrentEgressPorts | 1.3.6.1.4.1.3323.13.1.8.3.1.4 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. Maps directly to dot1qVlanCurrentEgressPorts. String representation of a hexadecimal number, where the bits represent the following ports: 0 (LSB): Eth1 1: Eth2 2: NMS1 3: NMS2 4: CPU (Xover in all other contexts) 5: Xover (CPU in all other contexts) 6: Link The swap of the CPU and Xover ports is a compromise for backwards compatibility. The CPU port was added first, and at that time, room was not reserved for the Xover port where it should be. | |||||||||||||
| CmnPr1qVlanCurrentUntaggedPorts | 1.3.6.1.4.1.3323.13.1.8.3.1.5 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory The set of ports which are transmitting traffic for this VLAN as untagged frames. Maps directly to dot1qVlanCurrentUntaggedPorts. | |||||||||||||
| CmnPr1qVlanStatus | 1.3.6.1.4.1.3323.13.1.8.3.1.6 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This object indicates the status of this entry.
other(1) - this entry is currently in use but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in dot1qVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent dot1qVlanStaticTable
entry and ports learnt dynamically.
dynamicGvrp(3) - this entry is currently in use
and will remain so until removed by GVRP. There
is no static entry for this VLAN and it will be
removed when the last port leaves the VLAN.
Maps directly to dot1qVlanStatus.
| |||||||||||||
| CmnPr1qVlanCreationTime | 1.3.6.1.4.1.3323.13.1.8.3.1.7 | TimeTicks | RO | mandatory | |||||||||
column · TimeTicks · read-only · mandatory The value of sysUpTime when this VLAN was created. Maps directly to dot1qVlanCreationTime. | |||||||||||||
| TmnPr1qVlanStaticTable | 1.3.6.1.4.1.3323.13.1.8.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset. Maps directly to dot1qVlanStaticTable. | |||||||||||||
| RmnPr1qVlanStaticEntry | 1.3.6.1.4.1.3323.13.1.8.4.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Static information for a VLAN configured into the device by (local or network) management. Maps directly to dot1qVlanStaticEntry
| |||||||||||||
| CmnPr1qVlanStaticId | 1.3.6.1.4.1.3323.13.1.8.4.1.1 | INTEGER (1..4094) | RW | mandatory | |||||||||
column · INTEGER (1..4094) · read-write · mandatory The VLAN-ID associated with this VLAN. | |||||||||||||
| CmnPr1qVlanStaticName | 1.3.6.1.4.1.3323.13.1.8.4.1.2 | DisplayString (SIZE (0..16)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..16)) · read-write · mandatory An administratively assigned string, which may be used to identify the VLAN. Maps directly to dot1qVlanStaticName. | |||||||||||||
| CmnPr1qVlanStaticEgressPorts | 1.3.6.1.4.1.3323.13.1.8.4.1.3 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in mnPr1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed.
Maps directly to dot1qVlanStaticEgressPorts.
FORMAT: This object is a ASCII string representation of
a hexadecimal number. The bits in this number
represent ports as follows:
Std Port # Port Name Object Value
---------- --------- -------
1 ETH1 1
2 ETH2 2
3 NMS1 4
4 NMS2 8
5 Xover 20 (note: not in order)
6 NMS to CPU 10 (note: not in order)
7 Link 40
8 ETH3 80
9 ETH4 100
10 ETH5 200
11 ETH6 400
12 ETH7 800
13 ETH8 1000
14 ETH9 2000
15 ETH10 4000
16 GB1 8000
17 GB2 10000
18 SW1 Down 20000
19 SW1 Up 40000
20 SW2 Down 80000
21 SW2 Up 100000
Example: Ports Link and ETH3 would be represented as 'C0'. | |||||||||||||
| CmnPr1qVlanForbiddenEgressPorts | 1.3.6.1.4.1.3323.13.1.8.4.1.4 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in mnPrVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set. FORMAT: same as mnPr1qVlanStaticEgressPorts, above. Maps directly to dot1qVlanForbiddenEgressPorts. | |||||||||||||
| CmnPr1qVlanStaticUntaggedPorts | 1.3.6.1.4.1.3323.13.1.8.4.1.5 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The set of ports which should transmit traffic for this VLAN as untagged frames. Maps directly to dot1qVlanStaticUntaggedPorts. | |||||||||||||
| CmnPr1qVlanStaticRowStatus | 1.3.6.1.4.1.3323.13.1.8.4.1.6 | RowStatus | RW | mandatory | |||||||||
column · RowStatus · read-write · mandatory This object indicates the status of this entry. Maps directly to dot1qVlanStaticRowStatus. | |||||||||||||
| CmnPr1qVlanStaticFID | 1.3.6.1.4.1.3323.13.1.8.4.1.7 | INTEGER (0..4094) | RW | mandatory | |||||||||
| CmnPr1qVlanStaticRingID | 1.3.6.1.4.1.3323.13.1.8.4.1.8 | INTEGER (0..10) | RW | mandatory | |||||||||
| TmnPrVlanDeviceTrafficClassTable | 1.3.6.1.4.1.3323.13.1.8.5 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table mapping evaluated User Priority (802.1p) to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(mnPrVLANPortNumTrafficClasses-1)). Maps directly to dot1dTrafficClassTable. Used by 'VLAN Priorities' for all Ethernet LIs. | |||||||||||||
| RmnPrVlanDeviceTrafficClassEntry | 1.3.6.1.4.1.3323.13.1.8.5.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory User Priority to Traffic Class mapping. Maps directly to dot1dTrafficClassEntry, only it is indexed on per-device basis rather than per-port. | |||||||||||||
| CmnPrVlanDeviceTrafficClassIndex | 1.3.6.1.4.1.3323.13.1.8.5.1.1 | INTEGER (1..8) | RO | mandatory | |||||||||
column · INTEGER (1..8) · read-only · mandatory The index into the traffic class mapping table. | |||||||||||||
| CmnPrVlanDeviceTfcClsPriority | 1.3.6.1.4.1.3323.13.1.8.5.1.2 | INTEGER (0..7) | RO | mandatory | |||||||||
column · INTEGER (0..7) · read-only · mandatory The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. For untagged frames received from non-Ethernet media, this value is equal to the dot1dRegenUserPriority value for the ingress port and media-specific user priority. Maps directly to dot1dTrafficClassPriority. | |||||||||||||
| CmnPrVlanDeviceTrafficClass | 1.3.6.1.4.1.3323.13.1.8.5.1.3 | INTEGER (0..3) | RW | mandatory | |||||||||
column · INTEGER (0..3) · read-write · mandatory The Traffic Class the received frame is mapped to. Maps directly to dot1dTrafficClass. | |||||||||||||
| TmnPrVlanDeviceTosTable | 1.3.6.1.4.1.3323.13.1.8.6 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table mapping evaluated Type of Service (IPv4) or Traffic Class (IPv6) to Traffic Class, for forwarding by the bridge. Used by 'Diff Serve' for all Marvell Ethernet LIs. | |||||||||||||
| RmnPrVlanDeviceTosEntry | 1.3.6.1.4.1.3323.13.1.8.6.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory TOS to Traffic Class mapping. | |||||||||||||
| CmnPrVlanDeviceTosIndex | 1.3.6.1.4.1.3323.13.1.8.6.1.1 | INTEGER (1..4) | RO | mandatory | |||||||||
column · INTEGER (1..4) · read-only · mandatory The index into the TOS transalation table. | |||||||||||||
| CmnPrVlanDeviceTosTrafficClass | 1.3.6.1.4.1.3323.13.1.8.6.1.2 | INTEGER (0..3) | RO | mandatory | |||||||||
column · INTEGER (0..3) · read-only · mandatory The Traffic Class the received framer are mapped to. | |||||||||||||
| CmnPrVlanDeviceTos | 1.3.6.1.4.1.3323.13.1.8.6.1.3 | INTEGER (0..255) | RW | mandatory | |||||||||
column · INTEGER (0..255) · read-write · mandatory The Priority value determined for the received frame, based upon bits (7:2) of the IP TOS/DiffServ/Traffic Class feild. This values assumes that bits (1:0) are always zero. Therefore, values of 0, 4, 8, 12, ..., 248, and 252 are allowed. Any recieved frame with a value equal to or below this value and above the value of the next lower traffic class will be mapped to this traffic class. | |||||||||||||
| TmnPrVlanDeviceDscpTable | 1.3.6.1.4.1.3323.13.1.8.7 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table mapping DSCP to Traffic Class. Used by 'Diff Serve' for all Vitesse Ethernet LIs. | |||||||||||||
| RmnPrVlanDeviceDscpEntry | 1.3.6.1.4.1.3323.13.1.8.7.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory DSCP to Traffic Class mapping. | |||||||||||||
| CmnPrVlanDeviceDscpIndex | 1.3.6.1.4.1.3323.13.1.8.7.1.1 | INTEGER (1..8) | RO | mandatory | |||||||||
column · INTEGER (1..8) · read-only · mandatory ... | |||||||||||||
| CmnPrVlanDeviceDscpValueToMap | 1.3.6.1.4.1.3323.13.1.8.7.1.2 | INTEGER (0..63) | RO | mandatory | |||||||||
column · INTEGER (0..63) · read-only · mandatory ... | |||||||||||||
| CmnPrVlanDeviceDscpQosClass | 1.3.6.1.4.1.3323.13.1.8.7.1.3 | INTEGER (0..3) | RW | mandatory | |||||||||
column · INTEGER (0..3) · read-write · mandatory ... | |||||||||||||
| NmnPrSecurityObjects | 1.3.6.1.4.1.3323.13.1.9 | ||||||||||||
| TmnPrProtocolConfTable | 1.3.6.1.4.1.3323.13.1.9.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table containing management-protocol-specific configuration parameters for the management agents in the radios of the link. | |||||||||||||
| RmnPrProtocolConfEntry | 1.3.6.1.4.1.3323.13.1.9.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A set of configuration parameters for a single management protocol within one radio of the link. | |||||||||||||
| CmnPrProtocolIndex | 1.3.6.1.4.1.3323.13.1.9.3.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Management Protocol Configuration Index
| |||||||||||||
| CmnPrProtocolConfAccess | 1.3.6.1.4.1.3323.13.1.9.3.1.2 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object provides a means to configure the maximum level of access that the radio's agent will give to clients using a particular management protocol.
| |||||||||||||
| NmnCapabilities | 1.3.6.1.4.1.3323.14 | ||||||||||||
| NmnExperimental | 1.3.6.1.4.1.3323.15 | ||||||||||||
Traps / Notifications
- mnPrFNotificationAlarmClear
1.3.6.1.4.1.3323.13.1.0.2 - mnPrFNotificationInfoAlarmSet
1.3.6.1.4.1.3323.13.1.0.4 - mnPrFNotificationMajorAlarmSet
1.3.6.1.4.1.3323.13.1.0.1 - mnPrFNotificationMinorAlarmSet
1.3.6.1.4.1.3323.13.1.0.3 - mnPrNotificationAlarmClear
1.3.6.1.4.1.3323.11.1.1.0.2 - mnPrNotificationInfoAlarmSet
1.3.6.1.4.1.3323.11.1.1.0.4 - mnPrNotificationMajorAlarmSet
1.3.6.1.4.1.3323.11.1.1.0.1 - mnPrNotificationMinorAlarmSet
1.3.6.1.4.1.3323.11.1.1.0.3