G6-SYSTEM-MIB
MICROSENS GmbH & Co. KGMicrosens private MIB for Generation 6 Ethernet Switches
snmptranslate -m G6-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m G6-SYSTEM-MIB <host> 1.3.6.1.4.1.3181.10.6.1Imports
| MICROSENS-G6-MIB | g6 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Idevice | 1.3.6.1.4.1.3181.10.6.1 | ||||||||||||
identity Microsens private MIB for Generation 6 Ethernet Switches | |||||||||||||
| Nsystem | 1.3.6.1.4.1.3181.10.6.1.30 | ||||||||||||
| SsystemShowTimeDate | 1.3.6.1.4.1.3181.10.6.1.30.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Show system time and date. | |||||||||||||
| SsystemSetTime | 1.3.6.1.4.1.3181.10.6.1.30.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sets the system clock (time only). Syntax: 12:30:00 | |||||||||||||
| SsystemSetDate | 1.3.6.1.4.1.3181.10.6.1.30.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sets the system clock (date only). Syntax: 2012-12-24 | |||||||||||||
| SsystemShowUtilization | 1.3.6.1.4.1.3181.10.6.1.30.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Show CPU status information | |||||||||||||
| SsystemRebootDevice | 1.3.6.1.4.1.3181.10.6.1.30.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current This command will restart the device. All communication will be disrupted! Syntax: reboot_device = CONFIRM. | |||||||||||||
| SsystemCreateSnapshot | 1.3.6.1.4.1.3181.10.6.1.30.6 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Creates a snapshot of all relevant configuration and status information packaged as a single tar archive. This file can be found in service/snapshot. | |||||||||||||
| SsystemSendWakeOnLanPacket | 1.3.6.1.4.1.3181.10.6.1.30.7 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current This command will send a magic packet to wake up a selected sleeping device. The device is identified by its MAC address. Syntax: send_wake_on_lan_packet = 00:11:22:44:55:66. | |||||||||||||
| SsystemAlternativeMacAddress | 1.3.6.1.4.1.3181.10.6.1.30.8 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current This field is usually empty. This field may be used to override the MAC address fixed in the factory setting. NOTE: This value is only activated after a reset! | |||||||||||||
| SsystemBootPreference | 1.3.6.1.4.1.3181.10.6.1.30.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This feature only applies to devices that feature internal memory plus plugged-in SD cards. It defines which software is used after reboot.
| |||||||||||||
| SsystemInventory | 1.3.6.1.4.1.3181.10.6.1.30.10 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Inventory string free for customer use. Up to 512 character are accepted. Note this config is linked to the SD card and may change when config or SD card is exchanged. For an inventory information that is fixed to the hardware use Device.Factory.custom_info command. | |||||||||||||
| SsystemAutorunCliScript | 1.3.6.1.4.1.3181.10.6.1.30.11 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Optional cli scripts executed after power sequence is completed. Several scripts may be assigned, with comma or blank separation. | |||||||||||||
| SsystemSerialPort | 1.3.6.1.4.1.3181.10.6.1.30.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When set to DISABLED the local serial console port is disabled. Local access via serial cable is blocked. While this enhances local protection it also closes the emergency access should the device become inaccessible over the network due to misconfiguration. Other setting permit use of the serial port as TERMINAL_SERVER to attach a foreign device for management or to SMART_SENSOR to attach a local hardware extension for use with smart office solutions.
| |||||||||||||
| SsystemPermitDebugAccess | 1.3.6.1.4.1.3181.10.6.1.30.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When enabled it is possible to log into the system for debug purposes. This includes telnet/ssh, as well as web and file transfer protocols. To protect the system from unauthorized access it is advised to disable this feature unless instructed by authorized service personnel. NOTE: To ensure that any possibly pending debug access is terminated reboot the device after setting this parameter to disabled.
| |||||||||||||
| SsystemPermitIncomingAlerts | 1.3.6.1.4.1.3181.10.6.1.30.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When enabled it is possible receive alerts via from external devices via SNMP or HTTP(S). This feature may be used in combination with custom scripting to react to external events. To protect the system from unauthorized spam it is advised to disable this feature unless there is an application for it.
| |||||||||||||
| SsystemCharacterSet | 1.3.6.1.4.1.3181.10.6.1.30.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This parameter can be set to support languages with characters not found the normal Western European character set. Be sure to set your CLI terminal to the matching setting.
| |||||||||||||
| SsystemConfigurationSaveMode | 1.3.6.1.4.1.3181.10.6.1.30.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current In most cases the configuration of the device should be permanently saved and automatically be applied after a power up. In some cases, however, where public access to the device is granted it can be desirable to only save changes temporarily. In this mode all configuration changes that occurred after setting this mode will be saved in RAM only and will be forgotten on the next system reboot. Important: When this parameter changed to PERMANENTLY all outstanding changes are committed to SD card immediately. When this parameter is changed to temporarily, this already is not saved permanently. Use Management.Files.configuration.commit_config to save this setting before proceeding.
| |||||||||||||
| TcompatibilityTable | 1.3.6.1.4.1.3181.10.6.1.30.17 | NA | |||||||||||
table · not-accessible · current This section contains parameter that may be required to select certain compatibility functions that cannot be auto-detected by the system. | |||||||||||||
| RcompatibilityEntry | 1.3.6.1.4.1.3181.10.6.1.30.17.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CcompatibilityIndex | 1.3.6.1.4.1.3181.10.6.1.30.17.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CcompatibilityLinkDetection | 1.3.6.1.4.1.3181.10.6.1.30.17.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Usually the default setting POLL_AND_INTERRUPT should be selected. To attain fastest possible link change detection, as required by the RING protocols, select INT_ONLY. However, some older devices do not offer the faster interrupt only mode and cannot be used in this mode.
| |||||||||||||
| TscriptScheduleTable | 1.3.6.1.4.1.3181.10.6.1.30.18 | NA | |||||||||||
table · not-accessible · current This dynamic table permits the setup of automated script execution based on precise time scheduling definition. Any number of scripts may be executed at any desired interval or at selected dates. Please ensure the time and date are properly set (via NTP) when using this feature. | |||||||||||||
| RscriptScheduleEntry | 1.3.6.1.4.1.3181.10.6.1.30.18.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CscriptScheduleIndex | 1.3.6.1.4.1.3181.10.6.1.30.18.1.1 | INTEGER (0..31) | NA | ||||||||||
column · INTEGER (0..31) · not-accessible · current Automatically generated | |||||||||||||
| CscriptScheduleName | 1.3.6.1.4.1.3181.10.6.1.30.18.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Unique name to reference this entry and to remember whose MAC address is entered. | |||||||||||||
| CscriptScheduleMode | 1.3.6.1.4.1.3181.10.6.1.30.18.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When set to disabled this entry is ignored. It is recommended to first set the mode to disabled before the associated time values are modified. When all values are properly set re-enable the entry.
| |||||||||||||
| CscriptScheduleCliScript | 1.3.6.1.4.1.3181.10.6.1.30.18.1.4 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Enter the name of the cli script that should be executed when the defined time occurs. Ensure that the script name selects a valid file. Several scripts may be assigned, with comma or blank separation. | |||||||||||||
| CscriptScheduleMinutes | 1.3.6.1.4.1.3181.10.6.1.30.18.1.5 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Format: 3,14 select exact minutes hour:03 and hour:14. * is every minute. */5 defines every five minutes. | |||||||||||||
| CscriptScheduleHours | 1.3.6.1.4.1.3181.10.6.1.30.18.1.6 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Format: 0-23. Range and comma separation is permitted. * is every hour. | |||||||||||||
| CscriptScheduleDays | 1.3.6.1.4.1.3181.10.6.1.30.18.1.7 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Format: 1-31. Range and comma separation is permitted. * is every day. | |||||||||||||
| CscriptScheduleMonths | 1.3.6.1.4.1.3181.10.6.1.30.18.1.8 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Format: 1-12 or Jan-Dec. Range and comma separation is permitted. * is every month. | |||||||||||||
| CscriptScheduleWeekdays | 1.3.6.1.4.1.3181.10.6.1.30.18.1.9 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Format: 0-6 or Sun-Sat. Range and comma separation is permitted. * is every day. | |||||||||||||
| SsystemLastBootTime | 1.3.6.1.4.1.3181.10.6.1.30.100 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The time and date when this device has booted. | |||||||||||||
| SsystemUptime | 1.3.6.1.4.1.3181.10.6.1.30.101 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Uptime since last reboot in seconds. | |||||||||||||
| SsystemUsedMacAddress | 1.3.6.1.4.1.3181.10.6.1.30.102 | MacAddress | RO | ||||||||||
scalar · MacAddress · read-only · current Contains the mac address used by this unit. Usually follows to MAC defined in the factory setting, but may be overwritten by the alternative_mac_address. | |||||||||||||
| SsystemUsedBootMedia | 1.3.6.1.4.1.3181.10.6.1.30.103 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current
| |||||||||||||
| SsystemTemperature | 1.3.6.1.4.1.3181.10.6.1.30.104 | Integer32 (0..255) | RO | 53 | |||||||||
scalar · Integer32 (0..255) · read-only · current Temperature value in centigrade. Example values from LibreNMS test devices
| |||||||||||||
| SsystemClimateLevel | 1.3.6.1.4.1.3181.10.6.1.30.105 | INTEGER | RO | normal(3) | |||||||||
scalar · INTEGER · read-only · current Annotated temperature level.
Example values from LibreNMS test devices
| |||||||||||||
| TfirmwareTable | 1.3.6.1.4.1.3181.10.6.1.30.106 | NA | |||||||||||
table · not-accessible · current This section provides details about the running firmware. | |||||||||||||
| RfirmwareEntry | 1.3.6.1.4.1.3181.10.6.1.30.106.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CfirmwareIndex | 1.3.6.1.4.1.3181.10.6.1.30.106.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CfirmwareRunningVersion | 1.3.6.1.4.1.3181.10.6.1.30.106.1.2 | DisplayString | RO | 10.8.1 | |||||||||
column · DisplayString · read-only · current Running firmware version. Example values from LibreNMS test devices
| |||||||||||||
| CfirmwareBuildDate | 1.3.6.1.4.1.3181.10.6.1.30.106.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Build date of the running firmware. Format: 2012-01-18 12:00:22. | |||||||||||||
| CfirmwareBuildNumber | 1.3.6.1.4.1.3181.10.6.1.30.106.1.4 | DisplayString | RO | 11293 | |||||||||
column · DisplayString · read-only · current Build number of the running firmware retrieved from the repository. Example values from LibreNMS test devices
| |||||||||||||
| CfirmwarePatchVersion | 1.3.6.1.4.1.3181.10.6.1.30.106.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current If extra patches are installed, their version(s) are indicated here. | |||||||||||||
| TsaveInfoTable | 1.3.6.1.4.1.3181.10.6.1.30.107 | NA | |||||||||||
table · not-accessible · current This section provided status information about the internal parameter saving process. | |||||||||||||
| RsaveInfoEntry | 1.3.6.1.4.1.3181.10.6.1.30.107.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CsaveInfoIndex | 1.3.6.1.4.1.3181.10.6.1.30.107.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CsaveInfoLastSavedParameter | 1.3.6.1.4.1.3181.10.6.1.30.107.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Records the last written parameter. | |||||||||||||
| CsaveInfoSaveMode | 1.3.6.1.4.1.3181.10.6.1.30.107.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reflects Device.system.configuration_save_mode setting.
| |||||||||||||
| CsaveInfoWriteStatus | 1.3.6.1.4.1.3181.10.6.1.30.107.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates if last parameter was written to SD card or temporary RAM.
| |||||||||||||
| CsaveInfoTimeStamp | 1.3.6.1.4.1.3181.10.6.1.30.107.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Records the time the write status was last changed. | |||||||||||||