G6-SFP-MIB
MICROSENS GmbH & Co. KGMicrosens private MIB for Generation 6 Ethernet Switches
snmptranslate -m G6-SFP-MIB -Tpsnmpwalk -v2c -c <community> -m G6-SFP-MIB <host> 1.3.6.1.4.1.3181.10.6.1Imports
| MICROSENS-G6-MIB | g6 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Idevice | 1.3.6.1.4.1.3181.10.6.1 | ||||||||||||||||||||
identity Microsens private MIB for Generation 6 Ethernet Switches | |||||||||||||||||||||
| Nsfp | 1.3.6.1.4.1.3181.10.6.1.34 | ||||||||||||||||||||
| TconfigTable | 1.3.6.1.4.1.3181.10.6.1.34.1 | NA | |||||||||||||||||||
table · not-accessible · current These setting apply to each SFP in the system. | |||||||||||||||||||||
| RconfigEntry | 1.3.6.1.4.1.3181.10.6.1.34.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CconfigIndex | 1.3.6.1.4.1.3181.10.6.1.34.1.1.1 | INTEGER (0) | NA | ||||||||||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||||||||||
| CconfigLossOfSignalEvent | 1.3.6.1.4.1.3181.10.6.1.34.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled a loss of optical signal or the return of the signal will create an event.
| |||||||||||||||||||||
| CconfigOpticalDeltaDetect | 1.3.6.1.4.1.3181.10.6.1.34.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current An optical receive power level change of more than delta_threshold between two successive read cycles generates an event.
| |||||||||||||||||||||
| CconfigDeltaThreshold | 1.3.6.1.4.1.3181.10.6.1.34.1.1.4 | Integer32 (0..255) | RW | ||||||||||||||||||
column · Integer32 (0..255) · read-write · current Defines the dB difference required to trigger an event. Only 1 dB steps are permitted. A value of 0 detects any change. This setting is only for testing. Recommended value: 2. | |||||||||||||||||||||
| TinformationTable | 1.3.6.1.4.1.3181.10.6.1.34.100 | NA | |||||||||||||||||||
table · not-accessible · current This table displays data which are read from the inserted SFPs. | |||||||||||||||||||||
| RinformationEntry | 1.3.6.1.4.1.3181.10.6.1.34.100.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CinformationPortIndex | 1.3.6.1.4.1.3181.10.6.1.34.100.1.1 | INTEGER (0..47) | NA | ||||||||||||||||||
column · INTEGER (0..47) · not-accessible · current Automatically generated | |||||||||||||||||||||
| CinformationPort | 1.3.6.1.4.1.3181.10.6.1.34.100.1.2 | OCTET STRING (SIZE (0..4)) | RO | 8 | |||||||||||||||||
column · OCTET STRING (SIZE (0..4)) · read-only · current Indicates the physical port in which this SFP is inserted. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationLocation | 1.3.6.1.4.1.3181.10.6.1.34.100.1.3 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current Textual description of SFP location. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationStatus | 1.3.6.1.4.1.3181.10.6.1.34.100.1.4 | Bits | RO | laserDisabled(1) | |||||||||||||||||
column · Bits · read-only · current Should indicate OK. LOSS_OF_SIGNAL is shown when the optical receive power level is below the critical lower limit.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationType | 1.3.6.1.4.1.3181.10.6.1.34.100.1.5 | INTEGER | RO | sfp(2) | |||||||||||||||||
column · INTEGER · read-only · current This parameter shows which type of optics are installed
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationConnector | 1.3.6.1.4.1.3181.10.6.1.34.100.1.6 | INTEGER | RO | lc(1) | |||||||||||||||||
column · INTEGER · read-only · current Shows which connector is used with this SFP.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationWavelength | 1.3.6.1.4.1.3181.10.6.1.34.100.1.7 | DisplayString | RO | 1310 nm | |||||||||||||||||
column · DisplayString · read-only · current Nominal wavelength if this SFP. May also indicate ITU channel for DWDM optics. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationTxTechnology | 1.3.6.1.4.1.3181.10.6.1.34.100.1.8 | DisplayString | RO | Single Mode | |||||||||||||||||
column · DisplayString · read-only · current Distinguishes between multimode and single mode SFP. For DWDM SFP more details including grid are shown. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationRxTechnology | 1.3.6.1.4.1.3181.10.6.1.34.100.1.9 | DisplayString | RO | PIN diode | |||||||||||||||||
column · DisplayString · read-only · current Distinguishes between normal PIN receivers and more sensitive APD receivers. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationNominalBitrate | 1.3.6.1.4.1.3181.10.6.1.34.100.1.10 | DisplayString | RO | 1300 MBit/s | |||||||||||||||||
column · DisplayString · read-only · current Nominal bitrate rounded to nearest 100Mbit. Usually the SFP can be operated at lower speed as well. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationManufacturer | 1.3.6.1.4.1.3181.10.6.1.34.100.1.11 | DisplayString | RO | CISCO-Skylane | |||||||||||||||||
column · DisplayString · read-only · current Shows the manufacturer of this SFP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationPartNumber | 1.3.6.1.4.1.3181.10.6.1.34.100.1.12 | DisplayString | RO | SFP13020GE0BAA6 | |||||||||||||||||
column · DisplayString · read-only · current Shows the part number of this SFP. This will differ from the MICROSENS order code unless also MICROSENS is indicated as manufacturer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationRevision | 1.3.6.1.4.1.3181.10.6.1.34.100.1.13 | DisplayString | RO | D | |||||||||||||||||
column · DisplayString · read-only · current Internal revision code of this SFP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationSerialNumber | 1.3.6.1.4.1.3181.10.6.1.34.100.1.14 | DisplayString | RO | 2B7BD10810 | |||||||||||||||||
column · DisplayString · read-only · current Serial number of the SFP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationMfgDateCode | 1.3.6.1.4.1.3181.10.6.1.34.100.1.15 | DisplayString | RO | 220419 | |||||||||||||||||
column · DisplayString · read-only · current Manufacturing date code. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationWarnings | 1.3.6.1.4.1.3181.10.6.1.34.100.1.16 | Bits | RO | txPowerLow(0) | |||||||||||||||||
column · Bits · read-only · current
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationAlarms | 1.3.6.1.4.1.3181.10.6.1.34.100.1.17 | Bits | RO | txPowerTooLow(0) | |||||||||||||||||
column · Bits · read-only · current
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationTxPower | 1.3.6.1.4.1.3181.10.6.1.34.100.1.18 | DisplayString | RO | -5.8 dBm | |||||||||||||||||
column · DisplayString · read-only · current Indicates the optical output in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationRxPower | 1.3.6.1.4.1.3181.10.6.1.34.100.1.19 | DisplayString | RO | -7.0 dBm | |||||||||||||||||
column · DisplayString · read-only · current Indicates the optical input in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationTemperature | 1.3.6.1.4.1.3181.10.6.1.34.100.1.20 | DisplayString | RO | 63.5C / 146.7F | |||||||||||||||||
column · DisplayString · read-only · current Displays the temperature inside the SFP. This is usually higher than the system temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationMaxLength9Um | 1.3.6.1.4.1.3181.10.6.1.34.100.1.21 | DisplayString | RO | 10 km | |||||||||||||||||
column · DisplayString · read-only · current Displays nominal maximum reach of this SFP on a standard single mode fiber. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationMaxLength50Um | 1.3.6.1.4.1.3181.10.6.1.34.100.1.22 | DisplayString | RO | 550 m | |||||||||||||||||
column · DisplayString · read-only · current Displays nominal maximum reach of this SFP on a 50 micro meter multimode fiber. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationMaxLength62Um | 1.3.6.1.4.1.3181.10.6.1.34.100.1.23 | DisplayString | RO | 550 m | |||||||||||||||||
column · DisplayString · read-only · current Displays nominal maximum reach of this SFP on a 62.5 micro meter multimode fiber. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationMaxLengthCopper | 1.3.6.1.4.1.3181.10.6.1.34.100.1.24 | DisplayString | RO | 0 m | |||||||||||||||||
column · DisplayString · read-only · current Displays nominal maximum reach of this SFP on a copper cable. Only applies to electrical SFP. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationTuningRange | 1.3.6.1.4.1.3181.10.6.1.34.100.1.25 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current For wavelength tunable optics additional details are shown here. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationPowerConsumption | 1.3.6.1.4.1.3181.10.6.1.34.100.1.26 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current Typical power consumption values are shown if available from the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CinformationAdditionalInformation | 1.3.6.1.4.1.3181.10.6.1.34.100.1.27 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current Some special SFP can supply additional measurement data. For example OTDR reflection data can be listed here. Example values from LibreNMS test devices
| |||||||||||||||||||||