G6-RING-MIB
MICROSENS GmbH & Co. KGMicrosens private MIB for Generation 6 Ethernet Switches
snmptranslate -m G6-RING-MIB -Tpsnmpwalk -v2c -c <community> -m G6-RING-MIB <host> 1.3.6.1.4.1.3181.10.6.2Imports
| MICROSENS-G6-MIB | g6 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Iprotocol | 1.3.6.1.4.1.3181.10.6.2 | ||||||||||||
identity Microsens private MIB for Generation 6 Ethernet Switches | |||||||||||||
| Nring | 1.3.6.1.4.1.3181.10.6.2.45 | ||||||||||||
| TconfigTable | 1.3.6.1.4.1.3181.10.6.2.45.1 | NA | |||||||||||
table · not-accessible · current This section is used to configure the MICROSENS ring protocol which provides fast network redundancy. | |||||||||||||
| RconfigEntry | 1.3.6.1.4.1.3181.10.6.2.45.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CconfigIndex | 1.3.6.1.4.1.3181.10.6.2.45.1.1.1 | INTEGER (0..3) | NA | ||||||||||
column · INTEGER (0..3) · not-accessible · current Automatically generated | |||||||||||||
| CconfigName | 1.3.6.1.4.1.3181.10.6.2.45.1.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current User defined ring name is purely informational. | |||||||||||||
| CconfigEnableRing | 1.3.6.1.4.1.3181.10.6.2.45.1.1.3 | INTEGER | RW | disabled(0) | |||||||||
column · INTEGER · read-write · current Used to enable the redundant ring function.
Example values from LibreNMS test devices
| |||||||||||||
| CconfigRingMaster | 1.3.6.1.4.1.3181.10.6.2.45.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When enabled this unit is designated as ring master. There can only be one master in a ring.
| |||||||||||||
| CconfigNumber | 1.3.6.1.4.1.3181.10.6.2.45.1.1.5 | Integer32 (0..255) | RW | ||||||||||
column · Integer32 (0..255) · read-write · current Ring number must be set identical for each member of a ring. When left unassigned the default setting 1 for index 1 and 2 for index 2 and so on is used. | |||||||||||||
| CconfigPortA | 1.3.6.1.4.1.3181.10.6.2.45.1.1.6 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current Port number for ring side A | |||||||||||||
| CconfigPortB | 1.3.6.1.4.1.3181.10.6.2.45.1.1.7 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current Port number for ring side B. Ring master blocks port B when ring is ok. | |||||||||||||
| CconfigFailureDetection | 1.3.6.1.4.1.3181.10.6.2.45.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current For normal ring applications set detection to BOTH_PORTS. Other settings are required when two rings are coupled with 2 parallel links for redundant inter-ring traffic. In this case not all links should be monitored in order to avoid a possible loop condition. Careful planning is advised.
| |||||||||||||
| TmrpConfigTable | 1.3.6.1.4.1.3181.10.6.2.45.2 | NA | |||||||||||
table · not-accessible · current This section is used to configure the MRP ring protocol. | |||||||||||||
| RmrpConfigEntry | 1.3.6.1.4.1.3181.10.6.2.45.2.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmrpConfigIndex | 1.3.6.1.4.1.3181.10.6.2.45.2.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CmrpConfigEnableMrp | 1.3.6.1.4.1.3181.10.6.2.45.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Used to enable the MRP ring function. Only enable when all MRP and VLAN settings have been set. Only close cable connections of the ring when all nodes have been enabled.
| |||||||||||||
| CmrpConfigDomainName | 1.3.6.1.4.1.3181.10.6.2.45.2.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current User defined ring name is purely informational. When specified, the name will be inserted in all MRP related events. When left blank, the UUID of the MRP ring is inserted instead. | |||||||||||||
| CmrpConfigExpectedRole | 1.3.6.1.4.1.3181.10.6.2.45.2.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Determines role of this node in the ring. Configure only one master per ring.
| |||||||||||||
| CmrpConfigReactOnLinkChange | 1.3.6.1.4.1.3181.10.6.2.45.2.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When enabled the manager reacts to link change messages from a client. Disable this feature only when any member of the ring does not support react on link change feature. Also known as Advanced Mode. Only applies to manager role.
| |||||||||||||
| CmrpConfigRecoveryTime | 1.3.6.1.4.1.3181.10.6.2.45.2.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the guaranteed maximum recovery time (i.e. Time from the fault event to the time when the network regains its required communication function). Only applies to manager role.
| |||||||||||||
| CmrpConfigPort1 | 1.3.6.1.4.1.3181.10.6.2.45.2.1.7 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current Port number for ring side 1 | |||||||||||||
| CmrpConfigPort2 | 1.3.6.1.4.1.3181.10.6.2.45.2.1.8 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current Port number for ring side 2. Ring master blocks B when ring is ok | |||||||||||||
| CmrpConfigVlanId | 1.3.6.1.4.1.3181.10.6.2.45.2.1.9 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current When using a VLAN ensure that the rings ports are configured as member of the VLAN in the vlan settings. Leave this field blank or set to 0 when no VLAN is used. | |||||||||||||
| CmrpConfigResetRoundTripDelays | 1.3.6.1.4.1.3181.10.6.2.45.2.1.10 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current When executed the min_round_trip_delay and max_round_trip_delay values are reset to 0. This has no service implications. | |||||||||||||
| CmrpConfigResetStatistics | 1.3.6.1.4.1.3181.10.6.2.45.2.1.11 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current When executed statistics related to this MRP ring are cleared. This has no service implications. | |||||||||||||
| TstatusTable | 1.3.6.1.4.1.3181.10.6.2.45.100 | NA | |||||||||||
table · not-accessible · current Status values display the current condition of the ring network. | |||||||||||||
| RstatusEntry | 1.3.6.1.4.1.3181.10.6.2.45.100.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CstatusIndex | 1.3.6.1.4.1.3181.10.6.2.45.100.1.1 | INTEGER (0..3) | NA | ||||||||||
column · INTEGER (0..3) · not-accessible · current Automatically generated | |||||||||||||
| CstatusState | 1.3.6.1.4.1.3181.10.6.2.45.100.1.2 | INTEGER | RO | unused(0) | |||||||||
column · INTEGER · read-only · current
Example values from LibreNMS test devices
| |||||||||||||
| CstatusLastStateChange | 1.3.6.1.4.1.3181.10.6.2.45.100.1.3 | DisplayString | RO | | |||||||||
column · DisplayString · read-only · current Time and date string indication when the state of the ring protocol has last changed to the state now indicated. Example values from LibreNMS test devices
| |||||||||||||
| CstatusRingInterrupt | 1.3.6.1.4.1.3181.10.6.2.45.100.1.4 | INTEGER | RO | false(0) | |||||||||
column · INTEGER · read-only · current This indicates that at least one of the two ring ports is blocked. It is an OR of the port_a and port_b interrupt status fields. Note that the name may be misleading. Interrupted is to be understood as the port being actively blocked by the protocol to interrupt the traffic to prevent a network loop. This is part of normal operation.
Example values from LibreNMS test devices
| |||||||||||||
| CstatusGlobalRingAlarm | 1.3.6.1.4.1.3181.10.6.2.45.100.1.5 | INTEGER | RO | false(0) | |||||||||
column · INTEGER · read-only · current This indicates that somewhere in the overall ring a failure exists. It does not neccessarily indicate loss of data. Observe the overall state to determine this.
Example values from LibreNMS test devices
| |||||||||||||
| CstatusErrorDetected | 1.3.6.1.4.1.3181.10.6.2.45.100.1.6 | INTEGER | RO | false(0) | |||||||||
column · INTEGER · read-only · current Applies to the ring master. Indicates that the master has detected an error on one of the ports.
Example values from LibreNMS test devices
| |||||||||||||
| CstatusRingPortAInterrupted | 1.3.6.1.4.1.3181.10.6.2.45.100.1.7 | INTEGER | RO | false(0) | |||||||||
column · INTEGER · read-only · current Indicates that ring port_a is blocked. See parameter ring_interrupt for details.
Example values from LibreNMS test devices
| |||||||||||||
| CstatusRingPortBInterrupted | 1.3.6.1.4.1.3181.10.6.2.45.100.1.8 | INTEGER | RO | false(0) | |||||||||
column · INTEGER · read-only · current Indicates that ring port_a is blocked. See parameter ring_interrupt for details.
Example values from LibreNMS test devices
| |||||||||||||
| CstatusRingPortANeighbor | 1.3.6.1.4.1.3181.10.6.2.45.100.1.9 | INTEGER | RO | unused(0) | |||||||||
column · INTEGER · read-only · current This field indicates problems associated with the device connect to ring port_a. The issue may be located in the connected device, not locally!
Example values from LibreNMS test devices
| |||||||||||||
| CstatusRingPortBNeighbor | 1.3.6.1.4.1.3181.10.6.2.45.100.1.10 | INTEGER | RO | unused(0) | |||||||||
column · INTEGER · read-only · current This field indicates problems associated with the device connect to ring port_b. The issue may be located in the connected device, not locally!
Example values from LibreNMS test devices
| |||||||||||||
| TstatisticsTable | 1.3.6.1.4.1.3181.10.6.2.45.101 | NA | |||||||||||
table · not-accessible · current Statistics of the ring network performance. | |||||||||||||
| RstatisticsEntry | 1.3.6.1.4.1.3181.10.6.2.45.101.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CstatisticsIndex | 1.3.6.1.4.1.3181.10.6.2.45.101.1.1 | INTEGER (0..3) | NA | ||||||||||
column · INTEGER (0..3) · not-accessible · current Automatically generated | |||||||||||||
| CstatisticsNumberOfBackups | 1.3.6.1.4.1.3181.10.6.2.45.101.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Counts the number of backups engaged since the last power up. | |||||||||||||
| CstatisticsCurrentBackupDuration | 1.3.6.1.4.1.3181.10.6.2.45.101.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Indicates since how long a currently active backup is established. When no backup is active a 0 is displayed. | |||||||||||||
| CstatisticsLastBackupDuration | 1.3.6.1.4.1.3181.10.6.2.45.101.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Indicates since how long the last backup was established. Indicates 0 if there was no backup since last reboot. | |||||||||||||
| CstatisticsTotalBackupDuration | 1.3.6.1.4.1.3181.10.6.2.45.101.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Total time the ring was in backup since last reboot. | |||||||||||||
| TcouplingStatusTable | 1.3.6.1.4.1.3181.10.6.2.45.102 | NA | |||||||||||
table · not-accessible · current Indicates status of ring coupling function. | |||||||||||||
| RcouplingStatusEntry | 1.3.6.1.4.1.3181.10.6.2.45.102.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CcouplingStatusIndex | 1.3.6.1.4.1.3181.10.6.2.45.102.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CcouplingStatusControllerState | 1.3.6.1.4.1.3181.10.6.2.45.102.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Data transmission state.
| |||||||||||||
| CcouplingStatusCportLink | 1.3.6.1.4.1.3181.10.6.2.45.102.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Coupling port is in linkup condition.
| |||||||||||||
| CcouplingStatusCportForward | 1.3.6.1.4.1.3181.10.6.2.45.102.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Coupling port is in forwarding state.
| |||||||||||||
| CcouplingStatusCportTimeout | 1.3.6.1.4.1.3181.10.6.2.45.102.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates that no ring coupling frames were received within defined period.
| |||||||||||||
| CcouplingStatusConnectionValid | 1.3.6.1.4.1.3181.10.6.2.45.102.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates that source ip address of received frame matches configured partner ip.
| |||||||||||||
| CcouplingStatusValidPartnerIp | 1.3.6.1.4.1.3181.10.6.2.45.102.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates that received ring number matches expected locally configured ring number.
| |||||||||||||
| CcouplingStatusValidPartnerId | 1.3.6.1.4.1.3181.10.6.2.45.102.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current
| |||||||||||||
| TmrpStatusTable | 1.3.6.1.4.1.3181.10.6.2.45.103 | NA | |||||||||||
table · not-accessible · current Status common to manager and client | |||||||||||||
| RmrpStatusEntry | 1.3.6.1.4.1.3181.10.6.2.45.103.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmrpStatusIndex | 1.3.6.1.4.1.3181.10.6.2.45.103.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CmrpStatusOperation | 1.3.6.1.4.1.3181.10.6.2.45.103.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates if MRP function is enabled.
| |||||||||||||
| CmrpStatusAdminRole | 1.3.6.1.4.1.3181.10.6.2.45.103.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Mirrors expected role configuration.
| |||||||||||||
| CmrpStatusOperationalRole | 1.3.6.1.4.1.3181.10.6.2.45.103.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current real_role ??
| |||||||||||||
| CmrpStatusPort1State | 1.3.6.1.4.1.3181.10.6.2.45.103.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current
| |||||||||||||
| CmrpStatusPort2State | 1.3.6.1.4.1.3181.10.6.2.45.103.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current
| |||||||||||||
| CmrpStatusDomainId | 1.3.6.1.4.1.3181.10.6.2.45.103.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current When left blank the default id of all bits 1 is used. | |||||||||||||
| CmrpStatusDomainError | 1.3.6.1.4.1.3181.10.6.2.45.103.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current
| |||||||||||||
| TmrpManagerStatusTable | 1.3.6.1.4.1.3181.10.6.2.45.104 | NA | |||||||||||
table · not-accessible · current Status that applies to manager only. Invalid when in client mode. | |||||||||||||
| RmrpManagerStatusEntry | 1.3.6.1.4.1.3181.10.6.2.45.104.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CmrpManagerStatusIndex | 1.3.6.1.4.1.3181.10.6.2.45.104.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CmrpManagerStatusRingState | 1.3.6.1.4.1.3181.10.6.2.45.104.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates of MRP is enabled on this device.
| |||||||||||||
| CmrpManagerStatusManagerPriority | 1.3.6.1.4.1.3181.10.6.2.45.104.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The priority of this MRP entity. | |||||||||||||
| CmrpManagerStatusRingOpenCount | 1.3.6.1.4.1.3181.10.6.2.45.104.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Counts how many times was the ring broken. | |||||||||||||
| CmrpManagerStatusTimeSinceLastRingOpen | 1.3.6.1.4.1.3181.10.6.2.45.104.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Seconds since the ring was last opened. | |||||||||||||
| CmrpManagerStatusMaxRoundTripDelay | 1.3.6.1.4.1.3181.10.6.2.45.104.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The longest round trip delay that was measured since value reset. Value in microseconds | |||||||||||||
| CmrpManagerStatusMinRoundTripDelay | 1.3.6.1.4.1.3181.10.6.2.45.104.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The shortest round trip delay that was measured since value reset. Value in microseconds | |||||||||||||
| CmrpManagerStatusTopologyChangeInterval | 1.3.6.1.4.1.3181.10.6.2.45.104.1.8 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current Interval for sending of MRP_TopologyChange messages | |||||||||||||
| CmrpManagerStatusTopoChangeRepeatCount | 1.3.6.1.4.1.3181.10.6.2.45.104.1.9 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current Topology change repeat count for repeated transmission of MRP_TopologyChange messages | |||||||||||||
| CmrpManagerStatusShortTestInterval | 1.3.6.1.4.1.3181.10.6.2.45.104.1.10 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current Short interval for sending of MRP_Test messages after link changes on the ring | |||||||||||||
| CmrpManagerStatusDefaultTestInterval | 1.3.6.1.4.1.3181.10.6.2.45.104.1.11 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current Default interval for sending of MRP_Test messages on the ring | |||||||||||||
| CmrpManagerStatusTestMonitorCount | 1.3.6.1.4.1.3181.10.6.2.45.104.1.12 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current Count for monitoring the reception of MRP_Test messages | |||||||||||||
| CmrpManagerStatusTestMonitorExtCount | 1.3.6.1.4.1.3181.10.6.2.45.104.1.13 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The extended interval count for monitoring the reception of MRP_Test messages | |||||||||||||
| CmrpManagerStatusNonblockingSupport | 1.3.6.1.4.1.3181.10.6.2.45.104.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current False indicates that the manager requires ring clients that support port blocking. This is standard behavior of any modern switch.
| |||||||||||||
| TmrpClientStatusTable | 1.3.6.1.4.1.3181.10.6.2.45.105 | NA | |||||||||||
table · not-accessible · current Status that applies to client only. Invalid when in manager mode. | |||||||||||||
| RmrpClientStatusEntry | 1.3.6.1.4.1.3181.10.6.2.45.105.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmrpClientStatusIndex | 1.3.6.1.4.1.3181.10.6.2.45.105.1.1 | INTEGER (0) | NA | ||||||||||
column · INTEGER (0) · not-accessible · current Automatically generated | |||||||||||||
| CmrpClientStatusLinkDownTimer | 1.3.6.1.4.1.3181.10.6.2.45.105.1.2 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The interval for sending of MRP_linkDown messages | |||||||||||||
| CmrpClientStatusLinkUpTimer | 1.3.6.1.4.1.3181.10.6.2.45.105.1.3 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The interval for sending of MRP_linkUp messages | |||||||||||||
| CmrpClientStatusLinkChangeCount | 1.3.6.1.4.1.3181.10.6.2.45.105.1.4 | Integer32 (0..65535) | RO | ||||||||||
column · Integer32 (0..65535) · read-only · current The count for repeated transmission of MRP_LinkChange messages | |||||||||||||
| CmrpClientStatusBlockedSupport | 1.3.6.1.4.1.3181.10.6.2.45.105.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current True indicates that this client supports port blocking. The value is always true.
| |||||||||||||