SYMM-SMI
SymmetricomThis is the MIB Module for Symmetricom's enterprise specific parameters.
snmptranslate -m SYMM-SMI -Tpsnmpwalk -v2c -c <community> -m SYMM-SMI <host> 1.3.6.1.4.1.9070Imports
| RFC-1212 | MODULE-IDENTITY, OBJECT-IDENTITY |
|---|---|
| RFC1155-SMI | Integer32, Unsigned32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Isymmetricom | 1.3.6.1.4.1.9070 | ||||||||||||
identity This is the MIB Module for Symmetricom's enterprise specific parameters. | |||||||||||||
| !etcAlarm | 1.3.6.1.4.1.9070.0.0 | ||||||||||||
notification The trap provides notification of Hardware Clock, NTP, system, and network alarms events. The user can configure which alarms send traps on the ADMIN - Alarms page.
| |||||||||||||
| NsymmNetworkManagement | 1.3.6.1.4.1.9070.1 | ||||||||||||
node · current This is the root object identifier for all MIBS under the Symmetricom tree. | |||||||||||||
| NsymmCmipManagement | 1.3.6.1.4.1.9070.1.1 | ||||||||||||
node · current This is the root object identifier for CMIP based objects. | |||||||||||||
| NsymmSnmpManagement | 1.3.6.1.4.1.9070.1.2 | ||||||||||||
node · current This is the root object identifier for SNMP based objects. | |||||||||||||
| NsymmTimePictra | 1.3.6.1.4.1.9070.1.2.1 | ||||||||||||
node · current This is reserved for objects related to Symmetricom's TimePictra products. | |||||||||||||
| NsymmBroadband | 1.3.6.1.4.1.9070.1.2.2 | ||||||||||||
node · current The subtree that contains objects related to Symmetricom's GoWide products. | |||||||||||||
| NsymmTTM | 1.3.6.1.4.1.9070.1.2.3 | ||||||||||||
node · current The subtree that contains objects related to Symmetricom's Timing, Test and Measurement products. | |||||||||||||
| Nproducts | 1.3.6.1.4.1.9070.1.2.3.1 | ||||||||||||
| Nts2000 | 1.3.6.1.4.1.9070.1.2.3.1.1 | ||||||||||||
| Nnts | 1.3.6.1.4.1.9070.1.2.3.1.2 | ||||||||||||
| Nts2100 | 1.3.6.1.4.1.9070.1.2.3.1.3 | ||||||||||||
| Ns100 | 1.3.6.1.4.1.9070.1.2.3.1.4 | ||||||||||||
| Nsyncserver | 1.3.6.1.4.1.9070.1.2.3.1.5 | ||||||||||||
| Nversion | 1.3.6.1.4.1.9070.1.2.3.1.5.1 | ||||||||||||
| NntpSystem | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1 | ||||||||||||
| SntpSysLeap | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current NTP Leap Indicator. This is a two-bit code warning of an impending leap second to be inserted into the NTP timescale. The bits are set before 23:59 on the day of insertion and reset after 00:00 on the following day. This causes the number of seconds (rollover interval) in the day of insertion to be increased or decreased by one. In the case of primary servers the bits are set by operator intervention, while in the case of secondary servers the bits are set by the protocol. The two bits, bit 0 and bit 1, respectively, are coded as follows: =================================================== 00 no warning 01 last minute has 61 seconds 10 last minute has 59 seconds 11 alarm condition(clock not synchronized) =================================================== In all except the alarm condition(11), NTP itself does nothing with these bits, except pass them on to the time-conversion routines that are not part of NTP. The alarm condition occurs when, for whatever reason, the local clock is not synchronized, such as when first coming up or after an extended period when no primary reference source is available.
| |||||||||||||
| SntpSysStratum | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.2 | Integer32 (0..255) | RO | ||||||||||
scalar · Integer32 (0..255) · read-only · current Current NTP stratum level. This is an integer
indicating the stratum of the local clock with
values defined as follows:
================================================
0 unspecified
1 primary reference (e.g., calibrated atomic
clock, radio clock)
2-255 secondary reference (via NTP)
================================================ | |||||||||||||
| SntpSysPrecision | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Current NTP precision value. This is a signed integer indicating the precision of the various clocks, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20ms) or 60-Hz (16.17ms) power-frequency clock would be assigned the value -5 (31.25ms), while a 1000-Hz (1ms) crystal-controlled clock would be assigned the value -9 (1.95ms). | |||||||||||||
| SntpSysRootDelay | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.4 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current Total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds. Also known as root distance. | |||||||||||||
| SntpSysRootDispersion | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.5 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current Maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive values greater than zero are possible. | |||||||||||||
| SntpSysRefID | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.6 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current NTP Reference Clock Identifier. This is a
32 bit code identifying the particular reference
clock. In the case of stratum 0 (unspecified) or
stratum 1 (primary reference), this is a four-
octet, left-justified, zero-padded ASCII string.
While not enumerated as part of the NTP spec, the
following are suggested ASCII identifiers:
==============================================
DCN DCN routing protocol
NIST NIST public modem
TSP TSP time protocol
DTS Digital Time Service
ATOM Atomic clock (calibrated)
VLF VLF radio (OMEGA,etc.)
callsign Generic radio
LORC LORAN-C radionavigation
GOES GOES UHF environment satellite
GPS GPS UHF satellite positioning
==============================================
The following ref ids are used by the SyncServer:
==============================================
GPS GPS satellite)
IRIG IRIG B timecode
PPS Ext. 1 PPS input
E10M Ext. 10 MHz input
FREE Internal Clock
FLY Internal Clock after the Hardware
Clock reference is lost
============================================== | |||||||||||||
| SntpSysRefTime | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.7 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current NTP Reference Timestamp. This is the time, in timestamp format (converted to DisplayString), when the local clock was last updated. If the local clock has never been synchronized, the value is zero. | |||||||||||||
| SntpSysPoll | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.8 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum interval of 64 seconds. | |||||||||||||
| SntpSysPeer | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.9 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Current synchronization source. In stratum > 1 this variable returns the decimal representation of the IPv4 address of its current peer. In stratum = 1 this variable returns the decimal representation of the hardware clock which is 2981759. | |||||||||||||
| SntpSysPhase | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.10 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current System clock offset from the selected source. | |||||||||||||
| SntpSysFreq | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.11 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current System clock frequency correction from ntpd. | |||||||||||||
| SntpSysError | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.12 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current Current system error from ntpd. | |||||||||||||
| SntpSysClock | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.13 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current Current system time from ntpd. This is usually derived from the hardware clock but could be from any other ntp source. | |||||||||||||
| SntpSysSystem | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.14 | DisplayString (SIZE (1..80)) | RO | Symmetricom SyncServer | |||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current Description of the current system. Example values from LibreNMS test devices
| |||||||||||||
| SntpSysProcessor | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.15 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current Type of local processor. | |||||||||||||
| SntpSysNotrust | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.16 | INTEGER (0..1) | RO | mandatory | |||||||||
scalar · INTEGER (0..1) · read-only · mandatory Force authentication. | |||||||||||||
| SntpSysPktsReceived | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.17 | INTEGER (0..32768) | RO | mandatory | |||||||||
scalar · INTEGER (0..32768) · read-only · mandatory This variable is a rollover counter which reflects the number of ntp packets received by the SyncServer. It is valid for all versions of the SyncServer. | |||||||||||||
| SntpSysMode | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.18 | INTEGER | RO | mandatory | client(3) | ||||||||
scalar · INTEGER · read-only · mandatory An integer indicating the NTP association mode and are coded as follows: ============================================ 0 unspecified 1 symmetric active 2 symmetric passive 3 client 4 server 5 broadcast 6 reserved for NTP control messages 7 reserved for private use ============================================
Example values from LibreNMS test devices
| |||||||||||||
| SntpSysVersion | 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.19 | DisplayString (SIZE (1..80)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current The version of the NTP daemon on the system. | |||||||||||||
| Ntyming | 1.3.6.1.4.1.9070.1.2.3.1.5.1.2 | ||||||||||||
| StymingStatus | 1.3.6.1.4.1.9070.1.2.3.1.5.1.2.1 | DisplayString (SIZE (1..80)) | RO | Bad | |||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current Indicates what status the Hardware Clock considers itself to be as a timing source defined as follows: ============================================ Good HW Clock has a valid time reference. Bad HW Clock has no valid time reference. ============================================ Example values from LibreNMS test devices
| |||||||||||||
| StymingSource | 1.3.6.1.4.1.9070.1.2.3.1.5.1.2.2 | DisplayString (SIZE (1..40)) | RO | 4 | |||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current The time or frequency source currently in use
by the Hardware Clock defined as follows:
============================================
0 None
1 GPS
8 IRIG
16 External 1PPS
24 External 10 MHz
31 Freerun
============================================Example values from LibreNMS test devices
| |||||||||||||
| StymingTime | 1.3.6.1.4.1.9070.1.2.3.1.5.1.2.3 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current The time according to the Hardware Clock in
the format of:
WWW MMM dd hh:mm:ss yyyy
defined as follows:
============================================
WWW weekday
MMM character month
dd day of month
hh:mm:ss time
yyyy year
Example Thu Sep 21 23:46:09 2006
============================================ | |||||||||||||
| StymingVersion | 1.3.6.1.4.1.9070.1.2.3.1.5.1.2.4 | DisplayString (SIZE (1..40)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current The version of the software on the SyncServer's Hardware Clock. | |||||||||||||
| StymingFlyPeriod | 1.3.6.1.4.1.9070.1.2.3.1.5.1.2.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This variable is not currently used and returns zero. | |||||||||||||
| Ngps | 1.3.6.1.4.1.9070.1.2.3.1.5.1.3 | ||||||||||||
| SgpsPosition | 1.3.6.1.4.1.9070.1.2.3.1.5.1.3.1 | DisplayString (SIZE (1..80)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current Returns the current position in the format of:
A BB CC DD EEE F GGG HH II JJJ KK
defined as follows:
===============================================
A sign of the latitude
(1 = North, -1 = South)
BB degrees of the latitude
CC minutes of the latitude
DD seconds of the latitude
EEE milliseconds of the latitude
F sign of the longitude
(1 = East, -1 = West)
GGG degrees of the longitude
HH minutes of the longitude
II seconds of the longitude
JJJ milliseconds of the longitude
KK altitude in meters
=============================================== | |||||||||||||
| SgpsUTCOffset | 1.3.6.1.4.1.9070.1.2.3.1.5.1.3.2 | INTEGER (0..127) | RO | 18 | |||||||||
scalar · INTEGER (0..127) · read-only · current This variable is reserved for future use. Example values from LibreNMS test devices
| |||||||||||||
| SgpsHealth | 1.3.6.1.4.1.9070.1.2.3.1.5.1.3.3 | DisplayString (SIZE (1..80)) | RO | Receiver Health: 8 | |||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current This is the GPS receiver health status defined as
follows:
======================================================
0 = Receiver Down The Hardware Clock can't
communicate with the receiver.
1 = Unknown Mode An undefined mode of the GPS
receiver.
2 = Acquiring Signal The receiver is attempting to
track a GPS signal.
3 = Bad Geometry The geometry of the tracked
satellites is unsatisfactory for
a position solution.
4 = Propagate Mode A position estimation mode used
in highly dynamic environments.
5 = 2d Solution The receiver is able to perform
position fixes for latitude and
longitude but does not have
enough satellites for altitude.
6 = 3d Solution The receiver is now able to
perform position fixes for
latitude, longitude and altitude.
7 = Position Hold Position fixes are no longer
attempted, and the user entered
or surveyed position is used.
8 = Time Valid The receiver has valid timing
information from GPS satellites
(including current leap second
information). This is the final
state for all configured GPS modes.
======================================================Example values from LibreNMS test devices
| |||||||||||||
| SgpsSatlist | 1.3.6.1.4.1.9070.1.2.3.1.5.1.3.4 | DisplayString (SIZE (1..128)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..128)) · read-only · current Displays the GPS satellite tracking information in the
format of:
N,X1,Y1,Z1,...,XN,YN,ZN
defined as follows:
======================================================
N Number of satellites. If one or more satellites
are available, Xi,Yi,Zi follows N.
Xi Satellite vehicle number.
Yi Satellite signal strength in dBW where less
than -200 dBW means no signal.
Zi Zi can be either T or C. T(racking) means the
SyncServer receives the information from the
satellite but the information is not used in its
timing solution. C(urrent) means the SyncServer
currently uses satellite information in its
timing solution.
Examples
For no satellites:
0
For one satellite with vehicle number 16:
1,16,C,-158
For six satellites:
6,12,C,-156,14,C,-155,8,T,-162,24,C,-158,18,C,161,6,C,-160
====================================================== | |||||||||||||
| SgpsMode | 1.3.6.1.4.1.9070.1.2.3.1.5.1.3.5 | DisplayString (SIZE (1..80)) | RO | Receiver Mode: Hold | |||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current The mode of the GPS receiver defined as follows: ====================================================== Receiver Mode: Survey. The receiver is surveying and averaging its position. When it has finished surveying, the receiver switches to Position Hold mode. Survey mode and Position Hold mode are appropriate for static applications, such as a typical server room environment. This is the default mode when the SyncServer starts. Receiver Mode: Dynamic. The GPS receiver surveys continuously to determine its position and doesn't switch to another mode. This mode must be initiated by a user, and is appropriate for mobile applications such as ships, land vehicles, and aircraft. The degree of accuracy this mode offers is fine for NTP time over networks, but is less than optimal for the IRIG-B, 1 PPS, 10 MHz outputs available on some SyncServer models. Receiver Mode: Hold. The GPS receiver has completed Survey mode and switched to this mode, or the user has manually entered a position and forced it into this mode. The accuracy and stability of the SyncServer's timing outputs are optimal when the receiver has its exact position and is in this mode. ====================================================== Example values from LibreNMS test devices
| |||||||||||||
| Ndialup | 1.3.6.1.4.1.9070.1.2.3.1.5.1.4 | ||||||||||||
| Nnet | 1.3.6.1.4.1.9070.1.2.3.1.5.1.5 | ||||||||||||
| Netc | 1.3.6.1.4.1.9070.1.2.3.1.5.1.6 | ||||||||||||
| SetcVersion | 1.3.6.1.4.1.9070.1.2.3.1.5.1.6.1 | DisplayString (SIZE (1..80)) | RO | 2.83.2 | |||||||||
scalar · DisplayString (SIZE (1..80)) · read-only · current Version info for SyncServer system. Example values from LibreNMS test devices
| |||||||||||||
| SetcSerialNbr | 1.3.6.1.4.1.9070.1.2.3.1.5.1.6.2 | DisplayString (SIZE (1..40)) | RO | 1126A67238 | |||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current Unique serial number factory programmed into each unit. Example values from LibreNMS test devices
| |||||||||||||
| SetcModel | 1.3.6.1.4.1.9070.1.2.3.1.5.1.6.3 | DisplayString (SIZE (1..40)) | RO | S350 | |||||||||
scalar · DisplayString (SIZE (1..40)) · read-only · current Model type factory programmed into each unit. Example values from LibreNMS test devices
| |||||||||||||
| SetcUpgrade | 1.3.6.1.4.1.9070.1.2.3.1.5.1.6.4 | DisplayString (SIZE (1..1024)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..1024)) · read-only · current Describes whether or not an upgrade is available from the upgrade server described as follows: ====================================================== 0 No upgrade is available. 1 An upgrade is available. ====================================================== | |||||||||||||
| SetcUpgradeServer | 1.3.6.1.4.1.9070.1.2.3.1.5.1.6.5 | DisplayString (SIZE (1..1024)) | RO | ||||||||||
scalar · DisplayString (SIZE (1..1024)) · read-only · current Address of the server where new upgrades can be downloaded. | |||||||||||||
| SetcAlarmString | 1.3.6.1.4.1.9070.1.2.3.1.5.1.6.6 | DisplayString (SIZE (0..1024)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..1024)) · read-only · current Defines the format for the system alarm traps. This is only valid embedded in a trap message. | |||||||||||||
| Nxli | 1.3.6.1.4.1.9070.1.2.3.1.6 | ||||||||||||
| Nexperiment | 1.3.6.1.4.1.9070.1.2.3.99 | ||||||||||||
| NsymmCommonModelV1 | 1.3.6.1.4.1.9070.1.2.5 | ||||||||||||
node · current Symmetricom Common MIB subsets for multiple projects. | |||||||||||||
| NsymmDeviceDependent | 1.3.6.1.4.1.9070.1.2.5.7 | ||||||||||||
node · current Device-specific MIBs for Symmetricom/Microsemi products. | |||||||||||||
Traps / Notifications
- etcAlarm
1.3.6.1.4.1.9070.0.0