SSU2000-MIB
BancommPrivate MIB module for management of SSU2000. This SSU2000 private MIB supports all existing functions of the SSU2000 thus achieving full system control via this software interface. All reports, queries, autonomous messages, control, provisioning and administration (except for Set User ID/password/level, Set IP assignments, Reset Connection and SNMP Community Settings) will be addressable via SNMP.
snmptranslate -m SSU2000-MIB -Tpsnmpwalk -v2c -c <community> -m SSU2000-MIB <host> 1.3.6.1.4.1.601.3.1.1Imports
| DATUM-MIB | austron |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, private |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Issu2000 | 1.3.6.1.4.1.601.3.1.1 | ||||||||||||
identity Private MIB module for management of SSU2000. This SSU2000 private MIB supports all existing functions of the SSU2000 thus achieving full system control via this software interface. All reports, queries, autonomous messages, control, provisioning and administration (except for Set User ID/password/level, Set IP assignments, Reset Connection and SNMP Community Settings) will be addressable via SNMP. | |||||||||||||
| Ninventory | 1.3.6.1.4.1.601.3.1.1.1 | ||||||||||||
| TinventoryTable | 1.3.6.1.4.1.601.3.1.1.1.1 | NA | |||||||||||
table · not-accessible · current A list containing the system inventory of installed hardware and software components contained in the SSU-2000. The number of entries is given by the values of inChassis and inSlot. | |||||||||||||
| RinEntry | 1.3.6.1.4.1.601.3.1.1.1.1.1 | NA | |||||||||||
| CinChassis | 1.3.6.1.4.1.601.3.1.1.1.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CinSlot | 1.3.6.1.4.1.601.3.1.1.1.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CinModCode | 1.3.6.1.4.1.601.3.1.1.1.1.1.3 | TModuleCode | RO | ||||||||||
column · TModuleCode · read-only · current Reports module type is identified with a Hex value. | |||||||||||||
| CinName | 1.3.6.1.4.1.601.3.1.1.1.1.1.4 | DisplayString (SIZE (0..20)) | RO | Communication | |||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports module type is identified with a Name. Example values from LibreNMS test devices
| |||||||||||||
| CinSerial | 1.3.6.1.4.1.601.3.1.1.1.1.1.5 | DisplayString (SIZE (0..20)) | RO | R04334 | |||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports module's serial number. Example values from LibreNMS test devices
| |||||||||||||
| CinService | 1.3.6.1.4.1.601.3.1.1.1.1.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Reports module's in-service time. | |||||||||||||
| CinHwPart | 1.3.6.1.4.1.601.3.1.1.1.1.1.7 | DisplayString (SIZE (0..14)) | RO | 23413012-000-0 | |||||||||
column · DisplayString (SIZE (0..14)) · read-only · current Reports module's hardware part number. Example values from LibreNMS test devices
| |||||||||||||
| CinHwRev | 1.3.6.1.4.1.601.3.1.1.1.1.1.8 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current Reports module's hardware revision. | |||||||||||||
| CinHwDate | 1.3.6.1.4.1.601.3.1.1.1.1.1.9 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Reports module's date of manufacture. | |||||||||||||
| CinSwPart | 1.3.6.1.4.1.601.3.1.1.1.1.1.10 | DisplayString (SIZE (0..14)) | RO | 14313012-003-5 | |||||||||
column · DisplayString (SIZE (0..14)) · read-only · current Reports module's software part number. Example values from LibreNMS test devices
| |||||||||||||
| CinSwRev | 1.3.6.1.4.1.601.3.1.1.1.1.1.11 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current Reports module's main software revision. | |||||||||||||
| CinRevision | 1.3.6.1.4.1.601.3.1.1.1.1.1.12 | DisplayString (SIZE (0..60)) | RO | ||||||||||
column · DisplayString (SIZE (0..60)) · read-only · current Reports module's software and PLD revisions. | |||||||||||||
| CinShelfDesc | 1.3.6.1.4.1.601.3.1.1.1.1.1.13 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports shelf type description. | |||||||||||||
| CinShelfPart | 1.3.6.1.4.1.601.3.1.1.1.1.1.14 | DisplayString (SIZE (0..14)) | RO | ||||||||||
column · DisplayString (SIZE (0..14)) · read-only · current Reports shelf part number. | |||||||||||||
| CinInstalled | 1.3.6.1.4.1.601.3.1.1.1.1.1.15 | YesValue | RO | ||||||||||
column · YesValue · read-only · current Reports if this module is physically installed in the system or not. 1 = module is installed. 2 = module is physically absent, but the configuration data is still there. | |||||||||||||
| CinAction | 1.3.6.1.4.1.601.3.1.1.1.1.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User Action: ENABLE (1), enables the module. DISABLE (2), marks a module as inactive to be removed from the system. REMOVE (3), if physically absent, the module is removed from the registry. Note: This field only is meaningful during the write operation. When read, it always displayed as 1.
| |||||||||||||
| CinAdapterPart | 1.3.6.1.4.1.601.3.1.1.1.1.1.17 | DisplayString (SIZE (0..14)) | RO | ||||||||||
column · DisplayString (SIZE (0..14)) · read-only · current Reports the Symmetricom input adapter part number. Note: If this field is an empty string, it means the input adapter identification is not applicable for this module. | |||||||||||||
| TinFeatureTable | 1.3.6.1.4.1.601.3.1.1.1.2 | NA | |||||||||||
table · not-accessible · current The SSU-2000 has two optional features, NTP and SNMP. The Feature Presence table provides presence of these features. | |||||||||||||
| RinFeatureEntry | 1.3.6.1.4.1.601.3.1.1.1.2.1 | NA | |||||||||||
row · not-accessible · current inFeatureIndex The index to identify the feature inFeature The setting of the feature
| |||||||||||||
| CinFeatureIndex | 1.3.6.1.4.1.601.3.1.1.1.2.1.1 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current A unique value for each feature table. 1 = NTP 2 = SNMP | |||||||||||||
| CinFeature | 1.3.6.1.4.1.601.3.1.1.1.2.1.2 | EnaValue | RO | 1 | |||||||||
column · EnaValue · read-only · current Reports SSU-2000 feature set: 1 = Enabled 2 = Disabled Example values from LibreNMS test devices
| |||||||||||||
| Nmstatus | 1.3.6.1.4.1.601.3.1.1.2 | ||||||||||||
| NstatusCom | 1.3.6.1.4.1.601.3.1.1.2.1 | ||||||||||||
| NstatusClk | 1.3.6.1.4.1.601.3.1.1.2.2 | ||||||||||||
| TstaClkTable | 1.3.6.1.4.1.601.3.1.1.2.2.1 | NA | |||||||||||
table · not-accessible · current Reports Clock Module Status, loop mode, tau, and system-level priority quality level (pql). | |||||||||||||
| RstaCkEntry | 1.3.6.1.4.1.601.3.1.1.2.2.1.1 | NA | |||||||||||
| CstaCkChassis | 1.3.6.1.4.1.601.3.1.1.2.2.1.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstaCkSlot | 1.3.6.1.4.1.601.3.1.1.2.2.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This slot number and chassis number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for Clocks are slot 1 and slot 12. | |||||||||||||
| CstaCkStatus | 1.3.6.1.4.1.601.3.1.1.2.2.1.1.3 | INTEGER | RO | selected(2) | |||||||||
column · INTEGER · read-only · current Reports the clock module status. ok(1), -- module is enabled and operating without faults selected(2), -- module is enabled and selected as primary local oscillator disable(3), -- module is disabled fault(4) -- module is enabled and operating with fault(s)
| |||||||||||||
| CstaCkPLLMode | 1.3.6.1.4.1.601.3.1.1.2.2.1.1.4 | INTEGER | RO | lock(5) | |||||||||
column · INTEGER · read-only · current Reports the clock software Phase Locked Loop (PLL) Mode. failed(1), -- pll hardware failure, pll unlocked warmup(2), -- local oscillator is initialized and warming up acquire(3), -- LO is operating in acquire or fast locked mode holdover(4), -- LO is operating in holdover due to lose or reference input lock(5) -- LO is operating in normal mode
Example values from LibreNMS test devices
| |||||||||||||
| CstaCkTau | 1.3.6.1.4.1.601.3.1.1.2.2.1.1.5 | Counter32 | RO | 4563 | |||||||||
| CstaCkPql | 1.3.6.1.4.1.601.3.1.1.2.2.1.1.6 | INTEGER (0 | 1..16) | RO | 2 | |||||||||
column · INTEGER (0 | 1..16) · read-only · current Reports the system Priority Quality Level (PQL). The PQL indicates the Stratum Level of the clock. Zero indicates an invalid SSM was read. Example values from LibreNMS test devices
| |||||||||||||
| CstaCkUtc | 1.3.6.1.4.1.601.3.1.1.2.2.1.1.7 | YesValue | RO | 1 | |||||||||
column · YesValue · read-only · current Reports the clock has been TOD synced with GPS or PackeTime.. Example values from LibreNMS test devices
| |||||||||||||
| NstatusGps | 1.3.6.1.4.1.601.3.1.1.2.5 | ||||||||||||
| TstaGpsTable | 1.3.6.1.4.1.601.3.1.1.2.5.1 | NA | |||||||||||
table · not-accessible · current The GPS Input Module Status reports the module's current status, input port phase data, time status, MTIE threshold status, frequency threshold status, and TIE measurement statistics status. | |||||||||||||
| RstaGpsEntry | 1.3.6.1.4.1.601.3.1.1.2.5.1.1 | NA | |||||||||||
row · not-accessible · current GPS Status Attributes:
staGpsChassis
Identifies which chassis is being addressed
stGpskSlot
Identifies which slot is being addressed
staGpsMStatus
Reports module status
staGpsStatus
Reports gps input port status
staGpsPhaseA
Reports phase value versus clock A in nano-seconds.
staGpsPhaseB
Reports phase value versus clock B in nano-seconds.
staGpsUtc
Reports number tells us whether the GPS module has UTC time or not.
staGpsMtie1A
Reports which MTIE limit 1 threshold was exceeded on clock A.
staGpsMtie2A
Reports which MTIE limit 2 threshold was exceeded on clock A.
staGpsMtie1B
Reports which MTIE limit 1 threshold was exceeded on clock B.
staGpsMtie2B
Reports which MTIE limit 2 threshold was exceeded on clock B.
staGpsFreqA
Reports input port frequency threshold exceeded on clock A.
staGpsFreqB
Reports input port frequency threshold exceeded on clock B.
staGpsPpsSigma
Reports sigma (statistical) calculation representing noise variation on the GPS 1PPS
staGps3Sigma
Reports 3sigma (statistical) calculation representing noise variation on the GPS 1PPS
| |||||||||||||
| CstaGpsChassis | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstaGpsSlot | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for GPS are slot 3 and slot 5. | |||||||||||||
| CstaGpsStatus | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.3 | INTEGER | RO | selected(2) | |||||||||
column · INTEGER · read-only · current The GPS port status. ok(1), -- module is enabled and operating without faults selected(2), -- module is enabled and selected as input reference disable(3), -- module is disabled fault(4), -- module is enabled and operating with faults reject(5) -- module is rejected due to antenna failure
| |||||||||||||
| CstaGpsPhaseA | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.4 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | 123 | |||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current The phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaGpsPhaseB | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.5 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | 12 | |||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaGpsUtc | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.6 | YesValue | RO | 1 | |||||||||
column · YesValue · read-only · current Reports the GPS module has been set to UTC time (or not). 1 = time is available 2 = time is not available Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsMStatus | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.7 | INTEGER | RO | ok(1) | |||||||||
column · INTEGER · read-only · current Reports the GPS module status. ok(1), -- module is enabled and operating normally disable(2), -- module is disabled fault(3) -- module is enabled, but not operational due to faults
Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsMtie1A | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.8 | INTEGER | RO | ok(1) | |||||||||
column · INTEGER · read-only · current Reports which MTIE limit 1 threshold was exceeded on clock A. If ok, it means no error for MTIE limit 1 on clock A. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 1 threshold was exceeded on clock A.
Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsMtie2A | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.9 | INTEGER | RO | ok(1) | |||||||||
column · INTEGER · read-only · current Reports which MTIE limit 2 threshold was exceeded on clock A. If ok, it means no error for MTIE limit 2 on clock A. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 2 threshold was exceeded on clock A.
Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsMtie1B | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.10 | INTEGER | RO | ok(1) | |||||||||
column · INTEGER · read-only · current Reports which MTIE limit 1 threshold was exceeded on clock B. If ok, it means no error for MTIE limit 1 on clock B. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 1 threshold was exceeded on clock B.
Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsMtie2B | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.11 | INTEGER | RO | ok(1) | |||||||||
column · INTEGER · read-only · current Reports which MTIE limit 2 threshold was exceeded on clock B. If ok, it means no error for MTIE limit 2 on clock B. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 2 threshold was exceeded on clock B.
Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsFreqA | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.12 | OkValue | RO | 1 | |||||||||
column · OkValue · read-only · current Reports the input port frequency threshold exceeded on clock A. Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsFreqB | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.13 | OkValue | RO | 1 | |||||||||
column · OkValue · read-only · current Reports the input port frequency threshold exceeded on clock B. Example values from LibreNMS test devices
| |||||||||||||
| CstaGpsPpsSigma | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.14 | DisplayString (SIZE (0..32)) | RO | 3.60E-17 | |||||||||
| CstaGps3Sigma | 1.3.6.1.4.1.601.3.1.1.2.5.1.1.15 | DisplayString (SIZE (0..32)) | RO | 2.03E-15 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports current 3 Sigma Threshold. Example values from LibreNMS test devices
| |||||||||||||
| TstGpsPosTable | 1.3.6.1.4.1.601.3.1.1.2.5.2 | NA | |||||||||||
table · not-accessible · current The GPS attributes that report the status of the GPS engine's position and status | |||||||||||||
| RstGpsPosEntry | 1.3.6.1.4.1.601.3.1.1.2.5.2.1 | NA | |||||||||||
row · not-accessible · current The GPS position attributes:
stGpsPosChassis
Identifies which chassis is being addressed
stGpsPosSlot
Identifies which slot is being addressed
stGpsPosValid
Reports if the GPS position is valid or not.
stGpsPosLat
Reports antenna latitude position of the GPS module.
stGpsPosLon
Reports antenna longitude position of the GPS module.
stGpsPosHgt
Reports antenna height (meter) position of the GPS module.
stGpsPosAccurate
Reports antenna position accuracy
stGpsPosPdop
Reports PDOP assigns a value of accuracy to the calculated position.
stGpsPosAvg
Reports position averaging value indicates how many position values are used to determine position.
| |||||||||||||
| CstGpsPosChassis | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which shelf is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstGpsPosSlot | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for GPS are slot 3 and slot 5. | |||||||||||||
| CstGpsPosValid | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.3 | ValidValue | RO | ||||||||||
column · ValidValue · read-only · current Reports if the GPS position is valid or not. 1 = valid 2 = invalid | |||||||||||||
| CstGpsPosLat | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.4 | TLatAndLon | RO | ||||||||||
column · TLatAndLon · read-only · current Reports antenna latitude position of the GPS module. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The latitude is +/- 90 deg. | |||||||||||||
| CstGpsPosLon | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.5 | TLatAndLon | RO | ||||||||||
column · TLatAndLon · read-only · current Reports antenna longitude position of the GPS module. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The longitude is +/- 180 deg. | |||||||||||||
| CstGpsPosHgt | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.6 | TAntHeight | RO | ||||||||||
column · TAntHeight · read-only · current Reports antenna height (meter) position of the GPS module. The format is +hh.hh or -hh.hh The height is +/- 10000.0 meters. | |||||||||||||
| CstGpsPosAccurate | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports antenna position accuracy APPROX - position is not accurate D2 - position is accurate, 2D, height is not valid D3 - position is accurate, 3D, height is valid
| |||||||||||||
| CstGpsPosPdop | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.8 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current Reports PDOP indicates position precision as an integer representation of value in tenths. For example, the value 19 means 1.9 pdop. if zero, it means invalid. | |||||||||||||
| CstGpsPosAvg | 1.3.6.1.4.1.601.3.1.1.2.5.2.1.9 | INTEGER (0..3600) | RO | ||||||||||
column · INTEGER (0..3600) · read-only · current Reports satellite position averaging value. If zero, the satellite position is user entered. | |||||||||||||
| TstGpsAvailTable | 1.3.6.1.4.1.601.3.1.1.2.5.3 | NA | |||||||||||
table · not-accessible · current A list of GPS satellite availability, reports the location of visible satellites. | |||||||||||||
| RstGpsAvEntry | 1.3.6.1.4.1.601.3.1.1.2.5.3.1 | NA | |||||||||||
row · not-accessible · current GPS Availability attributes:
| |||||||||||||
| CstGpsAvChassis | 1.3.6.1.4.1.601.3.1.1.2.5.3.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstGpsAvSlot | 1.3.6.1.4.1.601.3.1.1.2.5.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for GPS are slot 3 and slot 5. | |||||||||||||
| CstGpsAvChnl | 1.3.6.1.4.1.601.3.1.1.2.5.3.1.3 | INTEGER (1..32) | NA | ||||||||||
column · INTEGER (1..32) · not-accessible · current Reports satellite channel number. | |||||||||||||
| CstGpsAvPNCode | 1.3.6.1.4.1.601.3.1.1.2.5.3.1.4 | INTEGER (0..99) | RO | ||||||||||
column · INTEGER (0..99) · read-only · current Reports satellite PN code. | |||||||||||||
| CstGpsAvElevation | 1.3.6.1.4.1.601.3.1.1.2.5.3.1.5 | INTEGER (0..90) | RO | ||||||||||
column · INTEGER (0..90) · read-only · current Reports calculated elevation (in degrees) of the satellite. | |||||||||||||
| CstGpsAvAzimuth | 1.3.6.1.4.1.601.3.1.1.2.5.3.1.6 | INTEGER (0..360) | RO | ||||||||||
column · INTEGER (0..360) · read-only · current Reports calculated Azimuth (in degrees) of the satellite. | |||||||||||||
| CstGpsAvHealthy | 1.3.6.1.4.1.601.3.1.1.2.5.3.1.7 | YesValue | RO | ||||||||||
column · YesValue · read-only · current Reports current health of the satellite. 1 = healthy 2 = unhealthy | |||||||||||||
| TstGpsTrackTable | 1.3.6.1.4.1.601.3.1.1.2.5.5 | NA | |||||||||||
table · not-accessible · current A list of GPS satellites being tracked show with visibility, signal strength, & health information. | |||||||||||||
| RstGpsTkEntry | 1.3.6.1.4.1.601.3.1.1.2.5.5.1 | NA | |||||||||||
| CstGpsTkChassis | 1.3.6.1.4.1.601.3.1.1.2.5.5.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstGpsTkSlot | 1.3.6.1.4.1.601.3.1.1.2.5.5.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for GPS are slot 3 and slot 5. | |||||||||||||
| CstGpsTkChnl | 1.3.6.1.4.1.601.3.1.1.2.5.5.1.3 | INTEGER (1..32) | NA | ||||||||||
column · INTEGER (1..32) · not-accessible · current Reports satellite channel number. | |||||||||||||
| CstGpsTkSv | 1.3.6.1.4.1.601.3.1.1.2.5.5.1.4 | INTEGER (0 | 1..32) | RO | ||||||||||
column · INTEGER (0 | 1..32) · read-only · current Reports satellite vehicle number being tracked. if zero, it is invalid | |||||||||||||
| CstGpsTkSnr | 1.3.6.1.4.1.601.3.1.1.2.5.5.1.5 | INTEGER (0 | 1..255) | RO | ||||||||||
column · INTEGER (0 | 1..255) · read-only · current Reports signal-to-noise ration number being reported if zero, it is invalid | |||||||||||||
| CstGpsTkStatus | 1.3.6.1.4.1.601.3.1.1.2.5.5.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports tracking status. src (1), -- search acq (2), -- acquire agc (3), -- automatic gain control frq (4), -- frequency locking cod (5), -- code locking msg (6), -- messaging tim (7), -- setting time eph (8), -- retriving ephemeris data ok (9) -- satellite being used in the timing solution
| |||||||||||||
| NstatusDs1E1Inp | 1.3.6.1.4.1.601.3.1.1.2.7 | ||||||||||||
| TstaDs1E1InpTable | 1.3.6.1.4.1.601.3.1.1.2.7.2 | NA | |||||||||||
table · not-accessible · current A list of DS1/E1 Input status entries. | |||||||||||||
| RstaDiEntry | 1.3.6.1.4.1.601.3.1.1.2.7.2.1 | NA | |||||||||||
| CstaDiChassis | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstaDiSlot | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaDiPort | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaDiStatus | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports input port status. ok(1), -- port is enabled & operating without faults selected(2), -- port is selected as system reference disable(3), -- port is diabled fault(4) -- port is enabled & operating with fault(s)
| |||||||||||||
| CstaDiPhaseA | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.5 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaDiPhaseB | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.6 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaDiPql | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.7 | INTEGER (0 | 1..16) | RO | ||||||||||
column · INTEGER (0 | 1..16) · read-only · current Reports input port Priority Quality Level (PQL). The PQL is the current stratum level (read or provisioned) being reported by the port. If zero, it is invalid. | |||||||||||||
| CstaDiPqlRcv | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.8 | YesValue | RO | ||||||||||
column · YesValue · read-only · current Reports receiving Sync Status Message (SSM) for the input port state. 1 = enabled 2 = disabled | |||||||||||||
| CstaDiLOS | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.9 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has LOS fault. | |||||||||||||
| CstaDiAIS | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.10 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has AIS fault. | |||||||||||||
| CstaDiOOF | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.11 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has OOF fault. | |||||||||||||
| CstaDiBPV | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.12 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has BPV fault. | |||||||||||||
| CstaDiCRC | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.13 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port CRC fault. | |||||||||||||
| CstaDiMtie1A | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 1 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 1 on clock A. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 1 threshold was exceeded versus clock A.
| |||||||||||||
| CstaDiMtie2A | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 2 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 2 versus clock A. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 2 threshold was exceeded versus clock A.
| |||||||||||||
| CstaDiMtie1B | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 1 threshold was exceeded verus clock B. If ok, it means no error for MTIE limit 1 versus clock B. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 1 threshold was exceeded versus clock B.
| |||||||||||||
| CstaDiMtie2B | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.17 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 2 threshold was exceeded versus clock B. If ok, it means no error for MTIE limit 2 versus clock B. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 2 threshold was exceeded versus clock B.
| |||||||||||||
| CstaDiFreqA | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.18 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port frequency threshold exceeded versus clock A. | |||||||||||||
| CstaDiFreqB | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.19 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port frequency threshold exceeded versus clock B. | |||||||||||||
| CstaLOSErCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port LOS error count. | |||||||||||||
| CstaLOSClCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port LOS clear count. | |||||||||||||
| CstaAISErCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.22 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port AIS error count. | |||||||||||||
| CstaAISClCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.23 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port AIS clear count. | |||||||||||||
| CstaOOFErCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port OOF error count. | |||||||||||||
| CstaOOFClCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port OOF clear count. | |||||||||||||
| CstaBPVErCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port BPV error count. | |||||||||||||
| CstaBPVClCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.27 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port BPV clear count. | |||||||||||||
| CstaCRCErCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.28 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port CRC error count. | |||||||||||||
| CstaCRCClCnt | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.29 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port CRC clear count. | |||||||||||||
| CstaDiMStatus | 1.3.6.1.4.1.601.3.1.1.2.7.2.1.30 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The input module status. ok(1), -- module is enabled and operating without faults disable(2), -- module is disabled fault(3) -- module is enabled and operating with fault(s)
| |||||||||||||
| NstatusCcInp | 1.3.6.1.4.1.601.3.1.1.2.8 | ||||||||||||
| TstaCcInpTable | 1.3.6.1.4.1.601.3.1.1.2.8.2 | NA | |||||||||||
table · not-accessible · current A list of Composite Clock Input status information. | |||||||||||||
| RstaCiEntry | 1.3.6.1.4.1.601.3.1.1.2.8.2.1 | NA | |||||||||||
| CstaCiChassis | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstaCiSlot | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaCiPort | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaCiStatus | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports input port status. ok(1), -- port is enabled & operating without faults selected(2), -- port is selected as system reference disable(3), -- port is diabled fault(4) -- port is enabled & operating with fault(s)
| |||||||||||||
| CstaCiPhaseA | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.5 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaCiPhaseB | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.6 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaCiLOS | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.9 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has LOS fault. | |||||||||||||
| CstaCiBPV | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.12 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has BPV fault. | |||||||||||||
| CstaCiLOSErCnt | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port LOS error count. | |||||||||||||
| CstaCiLOSClCnt | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port LOS clear count. | |||||||||||||
| CstaCiBPVErCnt | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port BPV error count. | |||||||||||||
| CstaCiBPVClCnt | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports input port BPV clear count. | |||||||||||||
| CstaCiMStatus | 1.3.6.1.4.1.601.3.1.1.2.8.2.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports input module status. ok(1), -- module is enabled and operating without faults disable(2), -- module is disabled fault(3) -- module is enabled and operating with fault(s)
| |||||||||||||
| NstatusOut | 1.3.6.1.4.1.601.3.1.1.2.10 | ||||||||||||
| TstaOutTable | 1.3.6.1.4.1.601.3.1.1.2.10.2 | NA | |||||||||||
table · not-accessible · current The list of Generic Output status information. | |||||||||||||
| RstaOtEntry | 1.3.6.1.4.1.601.3.1.1.2.10.2.1 | NA | |||||||||||
| CstaOtChassis | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which shelf is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on any chassis (1-5). | |||||||||||||
| CstaOtSlot | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaOtStatus | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports output port status. ok(1), -- modlule is enabled & operating without faults disable(3), -- module is diabled fault(4) -- module is enabled & operating with fault(s) reject(5) -- module type is mismatched with redundant module
| |||||||||||||
| CstaOtClkSel | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which clock is selected for generating the output. clka(1), -- Clock A is selected as the Primary clock clkb(2), -- Clock B is selected as the Primary clock clkc(3), -- Clock C is selected as the Primary clock clkd(4), -- Clock D is selected as the Primary clock none(5) -- no clock is selected
| |||||||||||||
| CstaOtClka | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.5 | ActiveValue | RO | ||||||||||
column · ActiveValue · read-only · current Reports that clock A is available. | |||||||||||||
| CstaOtClkb | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.6 | ActiveValue | RO | ||||||||||
column · ActiveValue · read-only · current Reports that clock B is available. | |||||||||||||
| CstaOtClkc | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.7 | ActiveValue | RO | ||||||||||
column · ActiveValue · read-only · current Reports that clock C is available. | |||||||||||||
| CstaOtClkd | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.8 | ActiveValue | RO | ||||||||||
column · ActiveValue · read-only · current Reports that clock D is available. | |||||||||||||
| CstaOtRednt | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.9 | INTEGER (0..20) | RO | ||||||||||
column · INTEGER (0..20) · read-only · current Reports the adjacent slot number if this module is the output module redundant pair. If this module is not redundant, zero is reported. | |||||||||||||
| CstaOtPql | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.10 | INTEGER (0 | 1..16) | RO | ||||||||||
column · INTEGER (0 | 1..16) · read-only · current Reports the Priority Quality Level (PQL) being generated. If zero, it is invalid or Not Applicable. | |||||||||||||
| CstaOtPortSta | 1.3.6.1.4.1.601.3.1.1.2.10.2.1.11 | OCTET STRING (SIZE (20)) | RO | ||||||||||
column · OCTET STRING (SIZE (20)) · read-only · current Reports the status for ports 1-20. 1st digit represents port 1, 20th digit represents port 20 1 = ok 2 = not used 3 = internal port fault 4 = external port fault 5 = fault 6 = squelch | |||||||||||||
| NstatusLrm | 1.3.6.1.4.1.601.3.1.1.2.11 | ||||||||||||
| TstaLrmMTable | 1.3.6.1.4.1.601.3.1.1.2.11.2 | NA | |||||||||||
table · not-accessible · current A list of DS1 LRM module status information. | |||||||||||||
| RstaLrmMEntry | 1.3.6.1.4.1.601.3.1.1.2.11.2.1 | NA | |||||||||||
| CstaLrmMChassis | 1.3.6.1.4.1.601.3.1.1.2.11.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which shelf is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on any chassis (1-5). | |||||||||||||
| CstaLrmMSlot | 1.3.6.1.4.1.601.3.1.1.2.11.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaLrmMStatus | 1.3.6.1.4.1.601.3.1.1.2.11.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the LRM module state. enable(1), -- module is enabled disable(2), -- module is disabled
| |||||||||||||
| CstaLrmMRefSrc | 1.3.6.1.4.1.601.3.1.1.2.11.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which clock is selected for generating the output and status. clka(1), -- clock A is selected clkb(2), -- clock B is selected clkc(3), -- clock C is selected clkd(4), -- clock D is selected none(5), -- no clock is selected pllflt(6) -- clock selected, but module's clock PLL is unlocked
| |||||||||||||
| CstaLrmMCtaId | 1.3.6.1.4.1.601.3.1.1.2.11.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports if CTA is installed or not, if installed it reports which type, 2 ports or quad (4) ports. If not installed, none is shown. If id is not recognized, unknown is shown.
| |||||||||||||
| TstaLrmPTable | 1.3.6.1.4.1.601.3.1.1.2.11.3 | NA | |||||||||||
table · not-accessible · current A list of DS1 LRM port status information. | |||||||||||||
| RstaLrmPEntry | 1.3.6.1.4.1.601.3.1.1.2.11.3.1 | NA | |||||||||||
row · not-accessible · current DS1 LRM module status attributes.
| |||||||||||||
| CstaLrmPChassis | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on any chassis (1-5). | |||||||||||||
| CstaLrmPSlot | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaLrmPPort | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.3 | INTEGER (1..4) | NA | ||||||||||
column · INTEGER (1..4) · not-accessible · current Identifies which port is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaLrmPStatus | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports LRM Port status. ok(1), -- port is functioning cut(2), -- port is in cut-through mode disable(3) -- port is disabled
| |||||||||||||
| CstaLrmPFrame | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports LRM Port frame status. d4(1), -- D4 signal esf(2), -- ESF signal none(3) -- indicate Loss Of Frame
| |||||||||||||
| CstaLrmPLos | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.6 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port LOS status. | |||||||||||||
| CstaLrmPAis | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.7 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port AIS status. | |||||||||||||
| CstaLrmPLof | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.8 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port LOF status. | |||||||||||||
| CstaLrmPBpv | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.9 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port BPV status. | |||||||||||||
| CstaLrmPSlip | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.10 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port SLIP status. If over the past 24 hours period, the slip count exceeds the threshold, the slip alarm is set. | |||||||||||||
| CstaLrmPSlips | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports LRM Port slip counts. | |||||||||||||
| CstaLrmPLosSide2 | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.12 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port LOS on SIDE2 status. | |||||||||||||
| CstaLrmPBpvTestTime | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports length of time (in seconds) the BPV has been under tested. | |||||||||||||
| CstaLrmPBpv60SRate | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.14 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports BPV Error Rate per second in 60-second window. The format is an ascii text string in float number. | |||||||||||||
| CstaLrmPBpv24HRate | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.15 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports BPV Error Rate per second in 86400-second (24 hours) window. The format is an ascii text string in float number. | |||||||||||||
| CstaLrmPBpvErrSecs | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports accumulated BPV Errored Seconds. | |||||||||||||
| CstaLrmPBpvSevErrSecs | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.17 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports accumulated BPV Severely Errored Seconds. | |||||||||||||
| CstaLrmPBpvSevErrRatio | 1.3.6.1.4.1.601.3.1.1.2.11.3.1.18 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports BPV Severely Error Ratio. The format is an ascii text string in float number. | |||||||||||||
| NstatusSineInp | 1.3.6.1.4.1.601.3.1.1.2.12 | ||||||||||||
| TstaSineInpTable | 1.3.6.1.4.1.601.3.1.1.2.12.2 | NA | |||||||||||
table · not-accessible · current A list of Sine Input status information. | |||||||||||||
| RstaSineiEntry | 1.3.6.1.4.1.601.3.1.1.2.12.2.1 | NA | |||||||||||
row · not-accessible · current Input port status attributes. | |||||||||||||
| CstaSineiChassis | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstaSineiSlot | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaSineiPort | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaSineiStatus | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports input port status. ok(1), -- port is enabled & operating without faults selected(2), -- port is selected as system reference disable(3), -- port is diabled fault(4) -- port is enabled & operating with fault(s)
| |||||||||||||
| CstaSineiPhaseA | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.5 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaSineiPhaseB | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.6 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaSineiLOS | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.7 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has LOS fault. | |||||||||||||
| CstaSineiMStatus | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports input module status. ok(1), -- module is enabled and operating without faults disable(2), -- module is disabled fault(3) -- module is enabled and operating with fault(s)
| |||||||||||||
| CstaSineiPql | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.9 | INTEGER (0 | 1..16) | RO | ||||||||||
column · INTEGER (0 | 1..16) · read-only · current Reports input port Priority Quality Level (PQL). The PQL is the current stratum level (read or provisioned) being reported by the port. If zero, it is invalid. | |||||||||||||
| CstaSineiMtie1A | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 1 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 1 on clock A. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 1 threshold was exceeded versus clock A.
| |||||||||||||
| CstaSineiMtie2A | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 2 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 2 versus clock A. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 2 threshold was exceeded versus clock A.
| |||||||||||||
| CstaSineiMtie1B | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 1 threshold was exceeded verus clock B. If ok, it means no error for MTIE limit 1 versus clock B. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 1 threshold was exceeded versus clock B.
| |||||||||||||
| CstaSineiMtie2B | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which MTIE limit 2 threshold was exceeded versus clock B. If ok, it means no error for MTIE limit 2 versus clock B. If not, one of the 10/ 100/ 1000/ 10000/ 100000 seconds MTIE limit 2 threshold was exceeded versus clock B.
| |||||||||||||
| CstaSineiFreqA | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.14 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port frequency threshold exceeded versus clock A. | |||||||||||||
| CstaSineiFreqB | 1.3.6.1.4.1.601.3.1.1.2.12.2.1.15 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port frequency threshold exceeded versus clock B. | |||||||||||||
| NstatusJccInp | 1.3.6.1.4.1.601.3.1.1.2.13 | ||||||||||||
| TstaJccInpTable | 1.3.6.1.4.1.601.3.1.1.2.13.2 | NA | |||||||||||
table · not-accessible · current A list of Composite Clock Input status information. | |||||||||||||
| RstaJcciEntry | 1.3.6.1.4.1.601.3.1.1.2.13.2.1 | NA | |||||||||||
| CstaJcciChassis | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CstaJcciSlot | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaJcciPort | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CstaJcciStatus | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports input port status. ok(1), -- port is enabled & operating without faults selected(2), -- port is selected as system reference disable(3), -- port is diabled fault(4) -- port is enabled & operating with fault(s)
| |||||||||||||
| CstaJcciPhaseA | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.5 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaJcciPhaseB | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.6 | INTEGER (-1999999998..1999999998 | 1999999999) | RO | ||||||||||
column · INTEGER (-1999999998..1999999998 | 1999999999) · read-only · current Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. | |||||||||||||
| CstaJcciLOS | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.7 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has LOS fault. | |||||||||||||
| CstaJcciBPV | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.8 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports input port has BPV fault. | |||||||||||||
| CstaJcci400Hz | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.9 | OnValue | RO | ||||||||||
column · OnValue · read-only · current Reports input port has 400Hz Sync Signal or not. | |||||||||||||
| CstaJcciMStatus | 1.3.6.1.4.1.601.3.1.1.2.13.2.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports input module status. ok(1), -- module is enabled and operating without faults disable(2), -- module is disabled fault(3) -- module is enabled and operating with fault(s)
| |||||||||||||
| NstatusLrmE1 | 1.3.6.1.4.1.601.3.1.1.2.14 | ||||||||||||
| TstaLrme1MTable | 1.3.6.1.4.1.601.3.1.1.2.14.2 | NA | |||||||||||
table · not-accessible · current A list of E1 LRM port status information. | |||||||||||||
| RstaLrme1MEntry | 1.3.6.1.4.1.601.3.1.1.2.14.2.1 | NA | |||||||||||
| CstaLrme1MChassis | 1.3.6.1.4.1.601.3.1.1.2.14.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on any chassis (1-5). | |||||||||||||
| CstaLrme1MSlot | 1.3.6.1.4.1.601.3.1.1.2.14.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaLrme1MStatus | 1.3.6.1.4.1.601.3.1.1.2.14.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the LRM module state. enable(1), -- module is enabled disable(2), -- module is disabled
| |||||||||||||
| CstaLrme1MRefSrc | 1.3.6.1.4.1.601.3.1.1.2.14.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports which clock is selected for generating the output and status. clka(1), -- clock A is selected clkb(2), -- clock B is selected clkc(3), -- clock C is selected clkd(4), -- clock D is selected none(5), -- no clock is selected pllflt(6) -- clock selected, but module's clock PLL is unlocked
| |||||||||||||
| CstaLrme1MCtaId | 1.3.6.1.4.1.601.3.1.1.2.14.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports if CTA is installed or not. If installed it reports which type, 2 ports or quad (4) ports. If not installed, none is shown. If id is not recognized, unknown is shown.
| |||||||||||||
| TstaLrme1PTable | 1.3.6.1.4.1.601.3.1.1.2.14.3 | NA | |||||||||||
table · not-accessible · current A list of E1 LRM port status information. | |||||||||||||
| RstaLrme1PEntry | 1.3.6.1.4.1.601.3.1.1.2.14.3.1 | NA | |||||||||||
row · not-accessible · current E1 LRM module status attributes. | |||||||||||||
| CstaLrme1PChassis | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on any chassis (1-5). | |||||||||||||
| CstaLrme1PSlot | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaLrme1PPort | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.3 | INTEGER (1..4) | NA | ||||||||||
column · INTEGER (1..4) · not-accessible · current Identifies which port is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaLrme1PStatus | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports LRM Port status. ok(1), -- port is functioning cut(2), -- port is in cut-through mode disable(3) -- port is disabled
| |||||||||||||
| CstaLrme1PFrame | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.5 | OnValue | RO | ||||||||||
column · OnValue · read-only · current Reports LRM Port frame status. cas(1), -- CAS signal ccs(2), -- CCS signal none(3) -- indicate Loss Of Frame | |||||||||||||
| CstaLrme1PLos | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.6 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port LOS status. | |||||||||||||
| CstaLrme1PAis | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.7 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port AIS status. | |||||||||||||
| CstaLrme1PLof | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.8 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port LOF status. | |||||||||||||
| CstaLrme1PBpv | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.9 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port BPV status. | |||||||||||||
| CstaLrme1PSlip | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.10 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port SLIP status. If over the past 24 hours period, the slip count exceeds the threshold, the slip alarm is set. | |||||||||||||
| CstaLrme1PSlips | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports LRM Port slip counts. | |||||||||||||
| CstaLrme1PLosSide2 | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.12 | OkValue | RO | ||||||||||
column · OkValue · read-only · current Reports LRM Port LOS on SIDE2 status. | |||||||||||||
| CstaLrme1PBpv60SRate | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.13 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports length of time (in seconds) the BPV has been under tested. The format is an ascii text string in float number. | |||||||||||||
| CstaLrme1PBpv24HRate | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.14 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports BPV Error Rate per second in 86400-second (24 hours) window. The format is an ascii text string in float number. | |||||||||||||
| CstaLrme1PBpvErrSecs | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports accumulated BPV Errored Seconds. | |||||||||||||
| CstaLrme1PBpvSevErrSecs | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.16 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports accumulated BPV Severely Errored Seconds. | |||||||||||||
| CstaLrme1PBpvSevErrRatio | 1.3.6.1.4.1.601.3.1.1.2.14.3.1.17 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports BPV Severely Error Ratio. The format is an ascii text string in float number. | |||||||||||||
| NstatusPtNtp | 1.3.6.1.4.1.601.3.1.1.2.15 | ||||||||||||
| TstaPtNtpTable | 1.3.6.1.4.1.601.3.1.1.2.15.1 | NA | |||||||||||
table · not-accessible · current A list of PackeTime NTP status information. | |||||||||||||
| RstaPtNtpEntry | 1.3.6.1.4.1.601.3.1.1.2.15.1.1 | NA | |||||||||||
| CstaPtNtpChassis | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaPtNtpSlot | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaPtNtpStatus | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.3 | INTEGER | RO | ok(1) | |||||||||
column · INTEGER · read-only · current The PackeTime NTP module status. ok(1), -- module is enabled and operating without faults disable(3), -- module is disabled fault(4), -- module is enabled and operating with fault(s) reject(5) -- module type between redundant modules do not agree
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpClkSel | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.4 | INTEGER | RO | clka(1) | |||||||||
column · INTEGER · read-only · current Reports which clock reference is selected to generate the output reference. clka(1), -- Clock A is selected as the Primary clock clkb(2), -- Clock B is selected as the Primary clock clkc(3), -- Clock C is selected as the Primary clock clkd(4), -- Clock D is selected as the Primary clock none(5) -- no clock is selected
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpClka | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.5 | ActiveValue | RO | 1 | |||||||||
column · ActiveValue · read-only · current Reports that clock A is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpClkb | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.6 | ActiveValue | RO | 1 | |||||||||
column · ActiveValue · read-only · current Reports that clock B is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpClkc | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.7 | ActiveValue | RO | 2 | |||||||||
column · ActiveValue · read-only · current Reports that clock C is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpClkd | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.8 | ActiveValue | RO | 1 | |||||||||
column · ActiveValue · read-only · current Reports that clock D is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpRednt | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.9 | INTEGER (0..20) | RO | 0 | |||||||||
column · INTEGER (0..20) · read-only · current Reports the adjacent slot number if this module is the redundant pair. If this module is not redundant, zero is reported. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpModState | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.10 | INTEGER | RO | stdalone(4) | |||||||||
column · INTEGER · read-only · current Reports the current operational mode. active(1), --If the module is in redundant pair and selected, it shall return active. stdby(2), --If the module is in redundant pair but not selected, it shall return stdby (standby). fault(3), --If the module disabled, it will return fault. stdalone(4) --If the module is not redundant pair, it shall return stdalone (standalone).
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpPAState | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.11 | INTEGER | RO | stdalone(4) | |||||||||
column · INTEGER · read-only · current Reports the current operational mode. active(1), --If service ports are bonded and selected, it shall return active. stdby(2), --If service ports are bonded but not selected, it shall return stdby (standby). fault(3), --Service port is faulted. stdalone(4) --If service ports are not bonded , it shall return stdalone (standalone).
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpPBState | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.12 | INTEGER | RO | stdalone(4) | |||||||||
column · INTEGER · read-only · current Reports the current operational mode. active(1), --If service ports are bonded and selected, it shall return active. stdby(2), --If service ports are bonded but not selected, it shall return stdby (standby). fault(3), --Service port is faulted. stdalone(4) --If service ports are not bonded , it shall return stdalone (standalone).
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpTod | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.13 | OnValue | RO | 1 | |||||||||
column · OnValue · read-only · current Reports if the NTP Time of Day is valid or invalid. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtNtpCommit | 1.3.6.1.4.1.601.3.1.1.2.15.1.1.14 | INTEGER | RO | done(1) | |||||||||
column · INTEGER · read-only · current Reports the Commit command status. 1 = done 2 = in progress
Example values from LibreNMS test devices
| |||||||||||||
| NstatusPtPtp | 1.3.6.1.4.1.601.3.1.1.2.16 | ||||||||||||
| TstaPtPtpTable | 1.3.6.1.4.1.601.3.1.1.2.16.1 | NA | |||||||||||
table · not-accessible · current List of PackeTime PTP status information. | |||||||||||||
| RstaPtPtpEntry | 1.3.6.1.4.1.601.3.1.1.2.16.1.1 | NA | |||||||||||
row · not-accessible · current The entries of PackeTime PTP status attributes.
| |||||||||||||
| CstaPtPtpChassis | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaPtPtpSlot | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaPtPtpStatus | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.3 | INTEGER | RO | ok(1) | |||||||||
column · INTEGER · read-only · current Reports PackeTime PTP module status. ok(1), -- module is enabled and operating without faults disable(3), -- module is disabled fault(4), -- module is enabled and operating with fault(s) reject(5) -- module type between redundant modules do not agree
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpClkSel | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.4 | INTEGER | RO | clka(1) | |||||||||
column · INTEGER · read-only · current Reports which clock reference is selected to generate the output reference. clka(1), -- Clock A is selected as the Primary clock clkb(2), -- Clock B is selected as the Primary clock clkc(3), -- Clock C is selected as the Primary clock clkd(4), -- Clock D is selected as the Primary clock none(5) -- no clock is selected
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpClka | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.5 | ActiveValue | RO | 1 | |||||||||
column · ActiveValue · read-only · current Reports that clock A is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpClkb | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.6 | ActiveValue | RO | 1 | |||||||||
column · ActiveValue · read-only · current Reports that clock B is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpClkc | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.7 | ActiveValue | RO | 2 | |||||||||
column · ActiveValue · read-only · current Reports that clock C is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpClkd | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.8 | ActiveValue | RO | 2 | |||||||||
column · ActiveValue · read-only · current Reports that clock D is available. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpRednt | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.9 | INTEGER (0..20) | RO | 11 | |||||||||
| CstaPtPtpModState | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.10 | INTEGER | RO | active(1) | |||||||||
column · INTEGER · read-only · current Reports the current operational mode. active(1), --If the module is in redundant pair and selected, it shall return active. stdby(2), --If the module is in redundant pair but not selected, it shall return stdby (standby). fault(3), --If the module disabled, it will return fault. stdalone(4) --If the module is not redundant pair, it shall return stdalone (standalone).
| |||||||||||||
| CstaPtPtpPAState | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.11 | INTEGER | RO | stdalone(4) | |||||||||
column · INTEGER · read-only · current Reports the current operational mode. active(1), --If service ports are bonded and selected, it shall return active. stdby(2), --If service ports are bonded but not selected, it shall return stdby (standby). fault(3), --Service port is faulted. stdalone(4) --If service ports are not bonded , it shall return stdalone (standalone).
Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpTod | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.12 | OnValue | RO | 1 | |||||||||
column · OnValue · read-only · current Reports if the PTP Time of Day is valid or invalid. Example values from LibreNMS test devices
| |||||||||||||
| CstaPtPtpCommit | 1.3.6.1.4.1.601.3.1.1.2.16.1.1.13 | INTEGER | RO | done(1) | |||||||||
column · INTEGER · read-only · current Reports the Commit command status. 1 = done 2 = in progress
Example values from LibreNMS test devices
| |||||||||||||
| TptpDfltDataSetTable | 1.3.6.1.4.1.601.3.1.1.2.16.2 | NA | |||||||||||
table · not-accessible · current List of the PackeTime PTP Management Messages: ptpDefaultDataSet | |||||||||||||
| RptpDfltDataSetEntry | 1.3.6.1.4.1.601.3.1.1.2.16.2.1 | NA | |||||||||||
row · not-accessible · current The entries of PackeTime PTP Management Messages: ptpDefaultDataSet attributes. | |||||||||||||
| CptpDfltDataSetChassis | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpDfltDataSetSlot | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpDfltDataSetClockId | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.3 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current Reports the PTP Clock Identity (64-bit value). The clock id is a hexadecimal format. | |||||||||||||
| CptpDfltDataSetClockClass | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.4 | INTEGER (0..255) | RO | ||||||||||
column · INTEGER (0..255) · read-only · current Reports the PTP Master Clock Class | |||||||||||||
| CptpDfltDataSetClockAccuracy | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the PTP Master Clock Accuracy Following is the Clock Accuracy Table 32 = within 25 ns 33 = within 100 ns 34 = within 250 ns 35 = within 1000 ns 36 = within 2.5 us 37 = within 10 us 38 = within 25 us 39 = within 100 us 40 = within 250 us 41 = within 1 ms 42 = within 2.5 ms 43 = within 10 ms 44 = within 25 ms 45 = within 100 ms 46 = within 250 ms 47 = within 1 sec 48 = within 10 sec 49 = beyond 10 sec 254 = unknown
| |||||||||||||
| CptpDfltDataSetTimeTraceable | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.6 | TrueValue | RO | ||||||||||
column · TrueValue · read-only · current Reports the PTP Master Time Traceability 1 = true, time traceable 2 = false, time not traceable | |||||||||||||
| CptpDfltDataSetFreqTraceable | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.7 | TrueValue | RO | ||||||||||
column · TrueValue · read-only · current Reports the PTP Master Frequency Traceability 1 = true, frequency traceable 2 = false, frequency not traceable | |||||||||||||
| CptpDfltDataSetDomainNumber | 1.3.6.1.4.1.601.3.1.1.2.16.2.1.8 | INTEGER (0..255) | RO | ||||||||||
column · INTEGER (0..255) · read-only · current Reports the PTP domain number. | |||||||||||||
| TptpClockDescrTable | 1.3.6.1.4.1.601.3.1.1.2.16.3 | NA | |||||||||||
table · not-accessible · current List of the PackeTime PTP Management Messages: ptpClockDescription. | |||||||||||||
| RptpClockDescrEntry | 1.3.6.1.4.1.601.3.1.1.2.16.3.1 | NA | |||||||||||
row · not-accessible · current Entries of the PackeTime PTP Management Messages: ptpClockDescription attributes. | |||||||||||||
| CptpClockDescrChassis | 1.3.6.1.4.1.601.3.1.1.2.16.3.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpClockDescrSlot | 1.3.6.1.4.1.601.3.1.1.2.16.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpClockDescrClockType | 1.3.6.1.4.1.601.3.1.1.2.16.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the PTP Clock Type The value 0x8000 meant Ordinary Clock
| |||||||||||||
| CptpClockDescrProtocolAddress | 1.3.6.1.4.1.601.3.1.1.2.16.3.1.4 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Reports the PTP IP Address of PTP port. | |||||||||||||
| CptpClockDescrManufacturerId | 1.3.6.1.4.1.601.3.1.1.2.16.3.1.5 | OCTET STRING (SIZE (3)) | RO | ||||||||||
column · OCTET STRING (SIZE (3)) · read-only · current Reports the PTP Manufacturer Id. The format is a 3 bytes array. The Manufacturer Id is 00 B0 AE | |||||||||||||
| CptpClockDescrProfileId | 1.3.6.1.4.1.601.3.1.1.2.16.3.1.6 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current Reports the PTP Profile ID.
The format is 6 bytes array.
If Telecom-2008, the profile_id is: 00 00 00 00 00 00
If ITU G8265.1, the profile_id is: 00 19 A7 00 01 00 | |||||||||||||
| TptpTimeMessageTable | 1.3.6.1.4.1.601.3.1.1.2.16.4 | NA | |||||||||||
table · not-accessible · current List of the PackeTime PTP Management Messages: ptpTimeMessage. | |||||||||||||
| RptpTimeMessageEntry | 1.3.6.1.4.1.601.3.1.1.2.16.4.1 | NA | |||||||||||
row · not-accessible · current The entries of PackeTime PTP Management Messages: ptpTimeMessage attributes | |||||||||||||
| CptpTimeMessageChassis | 1.3.6.1.4.1.601.3.1.1.2.16.4.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpTimeMessageSlot | 1.3.6.1.4.1.601.3.1.1.2.16.4.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpTimeMessageCurrentTimeSec | 1.3.6.1.4.1.601.3.1.1.2.16.4.1.3 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current Reports the PTP Current Time of seconds. The current is a 6-byte a hexadecimal format. | |||||||||||||
| CptpTimeMessageCurrentTimeNSec | 1.3.6.1.4.1.601.3.1.1.2.16.4.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports the PTP fractional Current Time of nanoseconds | |||||||||||||
| TptpPortDataSetTable | 1.3.6.1.4.1.601.3.1.1.2.16.5 | NA | |||||||||||
table · not-accessible · current List of the PackeTime PTP Management Messages: ptpPortDataSet | |||||||||||||
| RptpPortDataSetEntry | 1.3.6.1.4.1.601.3.1.1.2.16.5.1 | NA | |||||||||||
row · not-accessible · current The entries of PackeTime PTP Management Messages: ptpPortDataSet attributes | |||||||||||||
| CptpPortDataSetChassis | 1.3.6.1.4.1.601.3.1.1.2.16.5.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpPortDataSetSlot | 1.3.6.1.4.1.601.3.1.1.2.16.5.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CptpPortDataSetClockId | 1.3.6.1.4.1.601.3.1.1.2.16.5.1.3 | OCTET STRING (SIZE (8)) | RO | ||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current Reports the PTP Clock Identity (64-bit value). The port clock id is a hexadecimal format. | |||||||||||||
| CptpPortDataSetPortNumber | 1.3.6.1.4.1.601.3.1.1.2.16.5.1.4 | INTEGER (0..65535) | RO | ||||||||||
column · INTEGER (0..65535) · read-only · current Reports the PTP Port Number | |||||||||||||
| CptpPortDataSetPortState | 1.3.6.1.4.1.601.3.1.1.2.16.5.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the PTP Port State Following is the PTP Port State Table 0 = notdefined 1 = initializing 2 = faulty 3 = disabled 4 = listening 5 = premaster, it is a state before becoming a Master 6 = master 7 = passive 8 = uncalibrated 9 = slave
| |||||||||||||
| NstatusSynce | 1.3.6.1.4.1.601.3.1.1.2.17 | ||||||||||||
| TstaSynceTable | 1.3.6.1.4.1.601.3.1.1.2.17.1 | NA | |||||||||||
table · not-accessible · current List of SyncE status information: port_direction, ethernet_mode, rx_ssm, and tx_ssm | |||||||||||||
| RstaSynceEntry | 1.3.6.1.4.1.601.3.1.1.2.17.1.1 | NA | |||||||||||
row · not-accessible · current The entries of SyncE status attributes.
| |||||||||||||
| CstaSynceChassis | 1.3.6.1.4.1.601.3.1.1.2.17.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaSynceSlot | 1.3.6.1.4.1.601.3.1.1.2.17.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CstaSyncePortDirection | 1.3.6.1.4.1.601.3.1.1.2.17.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports SyncE Port Direction to be either Output or Input. The output port is a SyncE master port, and input port is a SyncE slave port.
| |||||||||||||
| CstaSynceEthernetMode | 1.3.6.1.4.1.601.3.1.1.2.17.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports SyncE operated on Ethernet to be either synchronous or asynchronous. It is synchronous mode, when an optical SFP is detected at an Ethernet port. It is an asynchronous mode, when an electrical SFP is detected at an Ethernet port, or there is no SFP detected.
| |||||||||||||
| CstaSynceRxSsm | 1.3.6.1.4.1.601.3.1.1.2.17.1.1.5 | INTEGER (0..15 | 255) | RO | ||||||||||
column · INTEGER (0..15 | 255) · read-only · current Reports SyncE the current rx ssm value (0 .. 15). If 255, SyncE does not receive ESMC messages | |||||||||||||
| CstaSynceTxSsm | 1.3.6.1.4.1.601.3.1.1.2.17.1.1.6 | INTEGER (0..15 | 255) | RO | ||||||||||
column · INTEGER (0..15 | 255) · read-only · current Reports SyncE the current tx ssm value (0 .. 15). If 255, SyncE does not transmit ESMC messages | |||||||||||||
| Nmsetup | 1.3.6.1.4.1.601.3.1.1.3 | ||||||||||||
| NsetupCom | 1.3.6.1.4.1.601.3.1.1.3.1 | ||||||||||||
| SsetCmId | 1.3.6.1.4.1.601.3.1.1.3.1.1 | DisplayString (SIZE (7)) | RO | ||||||||||
scalar · DisplayString (SIZE (7)) · read-only · current The system identifier, the value is always 'SSU2000'. | |||||||||||||
| SsetCmInfo | 1.3.6.1.4.1.601.3.1.1.3.1.2 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current Symmetricom contact information. This displays the Symmetricom address, phone, and fax numbers. | |||||||||||||
| SsetCmVer | 1.3.6.1.4.1.601.3.1.1.3.1.3 | DisplayString (SIZE (0..100)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Reports Communication module's software version | |||||||||||||
| SsetCmName | 1.3.6.1.4.1.601.3.1.1.3.1.4 | DisplayString (SIZE (1..20)) | RW | ||||||||||
scalar · DisplayString (SIZE (1..20)) · read-write · current Set the user assigned name for the SSU2000. Note: Use caution when changing this, TL1 sessions use the unit name as the target id (tid). | |||||||||||||
| NsetupClk | 1.3.6.1.4.1.601.3.1.1.3.2 | ||||||||||||
| TsetClkTable | 1.3.6.1.4.1.601.3.1.1.3.2.1 | NA | |||||||||||
table · not-accessible · current A list of clock status and setting information. | |||||||||||||
| RsetCkEntry | 1.3.6.1.4.1.601.3.1.1.3.2.1.1 | NA | |||||||||||
| CsetCkChassis | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CsetCkSlot | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This slot number and chassis number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for Clocks are slot 1 and slot 12. | |||||||||||||
| CsetCkWarmup | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.3 | INTEGER (900..3600) | RW | ||||||||||
column · INTEGER (900..3600) · read-write · current Set the clock warmup time in seconds. | |||||||||||||
| CsetCkMinTau | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.4 | INTEGER (150..10000) | RW | ||||||||||
column · INTEGER (150..10000) · read-write · current Set the clock minimum tau. The mintau is the starting time constant value during Locked mode. | |||||||||||||
| CsetCkMaxTau | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.5 | INTEGER (150..10000) | RW | ||||||||||
column · INTEGER (150..10000) · read-write · current Set the clock max tau. The maxtau is the final time constant value during Locked mode. | |||||||||||||
| CsetCkPLLMode | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the clock operating mode to ACQ/ LOCK/ HOLD.
Note: When WRITE is to request Clock to change its operating mode, but
when READ, it returns status of current operating mode. If current is
operating mode is Warmup, it will return as HOLD.
| |||||||||||||
| CsetCkTodTimeout | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.7 | INTEGER (60..10000) | RW | ||||||||||
column · INTEGER (60..10000) · read-write · current Set the TODSRC Timeout. The TOD Traceability Timeout shall allow the system to operate without a valid TOD source for some amount of time before indicating the ToD source is invalid. The timer shall have a user settable range from 60 to 10000 minutes, with a default value of 1440. | |||||||||||||
| CsetCkFreqTimeout | 1.3.6.1.4.1.601.3.1.1.3.2.1.1.8 | INTEGER (60..10000) | RW | ||||||||||
column · INTEGER (60..10000) · read-write · current Set the Frequency Timeout. The Frequency Traceability Timeout shall allow the system to operate without a valid input reference for some amount of time before indicating the frequency source is invalid. The timer shall have a user settable range from 60 to 10000 minutes, with a default value of 1440. | |||||||||||||
| NsetupGps | 1.3.6.1.4.1.601.3.1.1.3.5 | ||||||||||||
| TsetGpsTable | 1.3.6.1.4.1.601.3.1.1.3.5.1 | NA | |||||||||||
table · not-accessible · current A list of GPS status and setting information. | |||||||||||||
| RsetGpsEntry | 1.3.6.1.4.1.601.3.1.1.3.5.1.1 | NA | |||||||||||
| CsetGpsChassis | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CsetGpsSlot | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for GPS are slot 3 and slot 5. | |||||||||||||
| CsetGpsEngine | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the GPS engine manufacturer. na(1), -- not available unknown(2), -- unknown mot(3) -- motorola (or motorola compatible) nvs(4) -- NVS engine (or GLONASS compatible)
| |||||||||||||
| CsetGpsProvPql | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.4 | INTEGER (1..9) | RW | ||||||||||
column · INTEGER (1..9) · read-write · current Set the input port provisioned Priority Quality Level (PQL) value. Note: Valid values are 1 - 9. | |||||||||||||
| CsetGpsPriority | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.5 | INTEGER (0..10) | RW | ||||||||||
column · INTEGER (0..10) · read-write · current Set the input port priority level. The 0 is for monitor-only mode. The 1 is the highest priority. The 10 is the lowest priority. | |||||||||||||
| CsetGpsPdop | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.6 | INTEGER (3..10) | RW | ||||||||||
column · INTEGER (3..10) · read-write · current Set the PDOP mask [3 to 10]. | |||||||||||||
| CsetGpsPosel | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.7 | INTEGER (0..90) | RW | ||||||||||
column · INTEGER (0..90) · read-write · current Set the minimum satellite elevation mask for positioning [0 to 90 deg]. | |||||||||||||
| CsetGpsTimel | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.8 | INTEGER (0..90) | RW | ||||||||||
column · INTEGER (0..90) · read-write · current Set the minimum satellite elevation mask for timing [0 to 90 deg]. | |||||||||||||
| CsetGpsAvg | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.9 | INTEGER (20..3600) | RW | ||||||||||
column · INTEGER (20..3600) · read-write · current Set satellite position averaging value [20-3600]. Mot GPS: (20 - 3600) of averages for the calculated position fixes NVS GNSS: (20 - 1440) of averaging minutes | |||||||||||||
| CsetGpsLat | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.10 | TLatAndLon | RW | ||||||||||
column · TLatAndLon · read-write · current Set the antenna latitude of the GPS antenna. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The latitude is +/- 90 deg. | |||||||||||||
| CsetGpsLon | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.11 | TLatAndLon | RW | ||||||||||
column · TLatAndLon · read-write · current Set the antenna longitude of the GPS antenna. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The longitude is +/- 180 deg. | |||||||||||||
| CsetGpsHgt | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.12 | TAntHeight | RW | ||||||||||
column · TAntHeight · read-write · current Set the antenna height (meter) of the GPS antenna. The format is +hh.hh or -hh.hh The height is +/- 10000.0 meters. | |||||||||||||
| CsetGpsZeroPhase | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set phase error to zero for this GPS port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero. Note: This field only is meaningful during the write operation.
| |||||||||||||
| CsetGpsTodsrcPriority | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.14 | INTEGER (0..8) | RW | ||||||||||
column · INTEGER (0..8) · read-write · current Set the TODSRC (Time-Of-Day Source) priority. The priority is the for the specified module as the TOD Source, default is 0, range can be 0 through 8. Value 1 is the highest and 8 is the lowest. If the value is zero, the specified module cannot be TOD Source. | |||||||||||||
| CsetGpsTodsrcCompensation | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.15 | INTEGER (0..250) | RW | ||||||||||
column · INTEGER (0..250) · read-write · current Set the Antenna cable delay compensation {0 250} in the case of GPS
TOD Source(s) or the delay induced by the cable(s) used to connect
expansion shelves where the PackeTime ToD Source(s) is located in
relationship to the Main shelf. The time offset shall have a 100nS
resolution, thus the Delay value shall be multiplied by 100nS to
provide 1PPS compensation.
Valid user compensation values range is 0 thru 250 for a total compensation range of 0 to 25000nS (25uS). | |||||||||||||
| CsetGnssConsMode | 1.3.6.1.4.1.601.3.1.1.3.5.1.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set constellation mode of GNSS engine. gps(1), -- The constellation mode of gnss engine is gps. glonass(2), -- The constellation mode of gnss engine is glonass gpsGlonass(3), -- The constellation mode of gnss engine is gps+glonass.
| |||||||||||||
| TsetAlmThGpsInpTable | 1.3.6.1.4.1.601.3.1.1.3.5.2 | NA | |||||||||||
table · not-accessible · current A list of GPS input alarm attribute setup information. | |||||||||||||
| RsetMgEntry | 1.3.6.1.4.1.601.3.1.1.3.5.2.1 | NA | |||||||||||
row · not-accessible · current Input alarm attributes and settings.
setMgChassis
Identifies which chassis is being addressed.
setMgSlot
Identifies which slot position is being addressed.
setMgMtieStd
Set the input port setting of the MTIE limits to predefined values.
setMgMtie10EL1
Set the input port MTIE 10 seconds error threshold for the first limit setting.
setMgMtie10EL2
Set the input port MTIE 10 seconds error threshold for the second limit setting.
setMgMtie10CL1
Set the input port MTIE 10 seconds clear threshold for the first limit setting.
setMgMtie10CL2
Set the input port MTIE 10 seconds clear threshold for the second limit setting.
setMgMtie100EL1
Set the input port MTIE 100 seconds error threshold for the first limit setting.
setMgMtie100EL2
Set the input port MTIE 100 seconds error threshold for the second limit setting.
setMgMtie100CL1
Set the input port MTIE 100 seconds clear threshold for the first limit setting.
setMgMtie100CL2
Set the input port MTIE 100 seconds clear threshold for the second limit setting.
setMgMtie1000EL1
Set the input port MTIE 1000 seconds error threshold for the first limit setting.
setMgMtie1000EL2
Set the input port MTIE 1000 seconds error threshold for the second limit setting.
setMgMtie1000CL1
Set the input port MTIE 1000 seconds clear threshold for the first limit setting.
setMgMtie1000CL2
Set the input port MTIE 1000 seconds clear threshold for the second limit setting.
setMgMtie10000EL1
Set the input port MTIE 10000 seconds error threshold for the first limit setting.
setMgMtie10000EL2
Set the input port MTIE 10000 seconds error threshold for the second limit setting.
setMgMtie10000CL1
Set the input port MTIE 10000 seconds clear threshold for the first limit setting.
setMgMtie10000CL2
Set the input port MTIE 10000 seconds clear threshold for the second limit setting.
setMgMtie100000EL1
Set the input port MTIE 100000 seconds error threshold for the first limit setting.
setMgMtie100000EL2
Set the input port MTIE 100000 seconds error threshold for the second limit setting.
setMgMtie100000CL1
Set the input port MTIE 100000 seconds clear threshold for the first limit setting.
setMgMtie100000CL2
Set the input port MTIE 100000 seconds clear threshold for the second limit setting.
setMgFreqAErrLmt
Set the input port frequency error threshold for clock A.
setMgFreqAClrLmt
Set the input port frequency clear threshold for clock A.
setMgFreqATau
Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock A.
setMgFreqBErrLmt
Set the input port frequency error threshold for clock B.
setMgFreqBClrLmt
Set the input port frequency clear threshold for clock B.
setMgFreqBTau
Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock B.
| |||||||||||||
| CsetMgChassis | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CsetMgSlot | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for GPS are slot 3 and slot 5. | |||||||||||||
| CsetMgMtieStd | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the input port setting of the MTIE limits to predefined values. prs(1), -- ANSI T1.101 PRS MTIE MASK ds1(2), -- ANSI T1.101 DS1 MTIE MASK g811(3), -- G.811 (PRC) MTIE MASK g823(4) -- G.823 (SSU) MTIE MASK This field is only meaningful for a write operation.
| |||||||||||||
| CsetMgMtie10EL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.4 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMgMtie10EL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.5 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMgMtie10CL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.6 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMgMtie10CL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.7 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMgMtie100EL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.8 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMgMtie100EL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.9 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMgMtie100CL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.10 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMgMtie100CL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.11 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMgMtie1000EL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.12 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMgMtie1000EL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.13 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMgMtie1000CL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.14 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMgMtie1000CL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.15 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMgMtie10000EL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.16 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMgMtie10000EL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.17 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMgMtie10000CL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.18 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMgMtie10000CL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.19 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMgMtie100000EL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.20 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMgMtie100000EL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.21 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMgMtie100000CL1 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.22 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMgMtie100000CL2 | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.23 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMgFreqAErrLmt | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.24 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency error threshold for clock A. | |||||||||||||
| CsetMgFreqAClrLmt | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.25 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency clear threshold for clock A. | |||||||||||||
| CsetMgFreqATau | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.26 | INTEGER (10..1000) | RW | ||||||||||
column · INTEGER (10..1000) · read-write · current Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock A. | |||||||||||||
| CsetMgFreqBErrLmt | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.27 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency error threshold for clock B. | |||||||||||||
| CsetMgFreqBClrLmt | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.28 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency clear threshold for clock B. | |||||||||||||
| CsetMgFreqBTau | 1.3.6.1.4.1.601.3.1.1.3.5.2.1.29 | INTEGER (10..1000) | RW | ||||||||||
column · INTEGER (10..1000) · read-write · current Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock B. | |||||||||||||
| NsetupDs1E1Inp | 1.3.6.1.4.1.601.3.1.1.3.7 | ||||||||||||
| TsetDs1E1InpTable | 1.3.6.1.4.1.601.3.1.1.3.7.2 | NA | |||||||||||
table · not-accessible · current The list of DS1/E1 attribute setup information. | |||||||||||||
| RsetDiEntry | 1.3.6.1.4.1.601.3.1.1.3.7.2.1 | NA | |||||||||||
row · not-accessible · current Input status and settings attributes.
| |||||||||||||
| CsetDiChassis | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside in chassis 1 (main chassis). | |||||||||||||
| CsetDiSlot | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetDiPort | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetDiEnable | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the input port to enabled or disabled. | |||||||||||||
| CsetDiFrame | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the input framing type or clock frequency. esf(1), -- T1 ESF d4(2), -- T1 D4 ccs(3), -- E1 CCS cas(4), -- E1 CAS mhz1(5), -- Clock 1MHz khz1544(6), -- Clock 1544kHz khz2048(7), -- Clock 2048kHz mhz5(8), -- Clock 5MHz mhz10(9) -- Clock 10MHz
| |||||||||||||
| CsetDiZS | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.6 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Zero Supression (ZS) on the input port to enabled or disabled. | |||||||||||||
| CsetDiCRC | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.7 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set CRC verificaiton on the input port to enabled or disabled. | |||||||||||||
| CsetDiSSM | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.8 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Sync Status Messaging (SSM) on the input port to enabled or disabled.. | |||||||||||||
| CsetDiProvPql | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.9 | INTEGER (1..9) | RW | ||||||||||
column · INTEGER (1..9) · read-write · current Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. | |||||||||||||
| CsetDiPriority | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.10 | INTEGER (0..10) | RW | ||||||||||
column · INTEGER (0..10) · read-write · current Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. | |||||||||||||
| CsetDiGain | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.11 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the input port gain setting to enabled or disabled. | |||||||||||||
| CsetDiCSFlt | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set input Port 1 for external Cesium (CS) fault alarm logic level. off(1), -- function is disabled low(2), -- function is enabled, will trigger on low (0V) level high(3), -- function is enabled, will trigger on high (+5v) level na(4) -- not applicable Note: only available for port one.
| |||||||||||||
| CsetDiE1SsmBit | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.13 | INTEGER (4..8) | RW | ||||||||||
column · INTEGER (4..8) · read-write · current Set the input port E1 Sync Status Message (SSM) bit position. This command is only meaningful for the E1 input module. For DS1, this value is always 4, and has no meaning (i.e. not used). | |||||||||||||
| CsetDiZeroPhase | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero. Note: This field only is meaningful during the write operation.
| |||||||||||||
| CsetDiMtieCalc | 1.3.6.1.4.1.601.3.1.1.3.7.2.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Reports MTIE calculator (40Hz or 1Hz) being used The number represents the input port setting for MTIE Calculator measurement. - 40Hz - Selects the 40Hz MTIE values to set/clear MTIE alarms - 1Hz - Selects the 1Hz MTIE values to set/clear MTIE alarms Note: only available for port one.
| |||||||||||||
| TsetAlmThDs1E1InpTable | 1.3.6.1.4.1.601.3.1.1.3.7.4 | NA | |||||||||||
table · not-accessible · current A list of DS1/E1 input alarm attributes and settings information. | |||||||||||||
| RsetMiEntry | 1.3.6.1.4.1.601.3.1.1.3.7.4.1 | NA | |||||||||||
row · not-accessible · current Input alarm attributes and settings.
setMiChassis
Identifies which chassis is being addressed.
setMiSlot
Identifies which slot position is being addressed.
setMiPort
Identifies which port position is being addressed.
setMiMtieStd
Set the input port setting of the MTIE limits to predefined values.
setMiMtie10EL1
Set the input port MTIE 10 seconds error threshold for the first limit setting.
setMiMtie10EL2
Set the input port MTIE 10 seconds error threshold for the second limit setting.
setMiMtie10CL1
Set the input port MTIE 10 seconds clear threshold for the first limit setting.
setMiMtie10CL2
Set the input port MTIE 10 seconds clear threshold for the second limit setting.
setMiMtie100EL1
Set the input port MTIE 100 seconds error threshold for the first limit setting.
setMiMtie100EL2
Set the input port MTIE 100 seconds error threshold for the second limit setting.
setMiMtie100CL1
Set the input port MTIE 100 seconds clear threshold for the first limit setting.
setMiMtie100CL2
Set the input port MTIE 100 seconds clear threshold for the second limit setting.
setMiMtie1000EL1
Set the input port MTIE 1000 seconds error threshold for the first limit setting.
setMiMtie1000EL2
Set the input port MTIE 1000 seconds error threshold for the second limit setting.
setMiMtie1000CL1
Set the input port MTIE 1000 seconds clear threshold for the first limit setting.
setMiMtie1000CL2
Set the input port MTIE 1000 seconds clear threshold for the second limit setting.
setMiMtie10000EL1
Set the input port MTIE 10000 seconds error threshold for the first limit setting.
setMiMtie10000EL2
Set the input port MTIE 10000 seconds error threshold for the second limit setting.
setMiMtie10000CL1
Set the input port MTIE 10000 seconds clear threshold for the first limit setting.
setMiMtie10000CL2
Set the input port MTIE 10000 seconds clear threshold for the second limit setting.
setMiMtie100000EL1
Set the input port MTIE 100000 seconds error threshold for the first limit setting.
setMiMtie100000EL2
Set the input port MTIE 100000 seconds error threshold for the second limit setting.
setMiMtie100000CL1
Set the input port MTIE 100000 seconds clear threshold for the first limit setting.
setMiMtie100000CL2
Set the input port MTIE 100000 seconds clear threshold for the second limit setting.
setMiFreqAErrLmt
Set the input port frequency error threshold for clock A.
setMiFreqAClrLmt
Set the input port frequency clear threshold for clock A.
setMiFreqATau
Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock A.
setMiFreqBErrLmt
Set the input port frequency error threshold for clock B.
setMiFreqBClrLmt
Set the input port frequency clear threshold for clock B.
setMiFreqBTau
Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock B.
setMiLOSErrCnt
Set the input port error count threshold for LOS signal faults.
setMiLOSClrCnt
Set the input port clear count threshold for LOS signal faults.
setMiAISErrCnt
Set the input port error count threshold for AIS signal faults.
setMiAISClrCnt
Set the input port clear count threshold for AIS signal faults.
setMiOOFErrCnt
Set the input port error count threshold for OOF signal faults.
setMiOOFClrCnt
Set the input port clear count threshold for OOF signal faults.
setMiBPVErrCnt
Set the input port error count threshold for BPV signal faults.
setMiBPVClrCnt
Set the input port clear count threshold for BPV signal faults.
setMiCRCErrCnt
Set the input port error count threshold for CRC signal faults.
setMiCRCClrCnt
Set the input port clear count threshold for CRC signal faults.
| |||||||||||||
| CsetMiChassis | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CsetMiSlot | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetMiPort | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetMiMtieStd | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the input port setting of the MTIE limits to predefined values. prs(1), -- ANSI T1.101 PRS MTIE MASK ds1(2), -- ANSI T1.101 DS1 MTIE MASK g811(3), -- G.811 (PRC) MTIE MASK g823(4) -- G.823 (SSU) MTIE MASK This field is only meaningful for a write operation.
| |||||||||||||
| CsetMiMtie10EL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.5 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMiMtie10EL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.6 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMiMtie10CL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.7 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMiMtie10CL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.8 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMiMtie100EL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.9 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMiMtie100EL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.10 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMiMtie100CL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.11 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMiMtie100CL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.12 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMiMtie1000EL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.13 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMiMtie1000EL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.14 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMiMtie1000CL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.15 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMiMtie1000CL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.16 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMiMtie10000EL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.17 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMiMtie10000EL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.18 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMiMtie10000CL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.19 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMiMtie10000CL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.20 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMiMtie100000EL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.21 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMiMtie100000EL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.22 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMiMtie100000CL1 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.23 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMiMtie100000CL2 | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.24 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMiFreqAErrLmt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.25 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency error threshold for clock A. | |||||||||||||
| CsetMiFreqAClrLmt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.26 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency clear threshold for clock A. | |||||||||||||
| CsetMiFreqATau | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.27 | INTEGER (10..1000) | RW | ||||||||||
column · INTEGER (10..1000) · read-write · current Set the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock A. | |||||||||||||
| CsetMiFreqBErrLmt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.28 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency error threshold for clock B. | |||||||||||||
| CsetMiFreqBClrLmt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.29 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Set the input port frequency clear threshold for clock B. | |||||||||||||
| CsetMiFreqBTau | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.30 | INTEGER (10..1000) | RW | ||||||||||
column · INTEGER (10..1000) · read-write · current Set the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock B. | |||||||||||||
| CsetMiLOSErrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.31 | INTEGER (1..100) | RW | ||||||||||
column · INTEGER (1..100) · read-write · current Set the input port error count threshold for LOS signal faults. | |||||||||||||
| CsetMiLOSClrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.32 | INTEGER (1..100) | RW | ||||||||||
column · INTEGER (1..100) · read-write · current Set the input port clear count threshold for LOS signal faults. | |||||||||||||
| CsetMiAISErrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.33 | INTEGER (1..100) | RW | ||||||||||
column · INTEGER (1..100) · read-write · current Set the input port error count threshold for AIS signal faults. | |||||||||||||
| CsetMiAISClrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.34 | INTEGER (1..100) | RW | ||||||||||
column · INTEGER (1..100) · read-write · current Set the input port clear count threshold for AIS signal faults. | |||||||||||||
| CsetMiOOFErrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.35 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port error count threshold for OOF signal faults. | |||||||||||||
| CsetMiOOFClrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.36 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port clear count threshold for OOF signal faults. | |||||||||||||
| CsetMiBPVErrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.37 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port error count threshold for BPV signal faults. | |||||||||||||
| CsetMiBPVClrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.38 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port clear count threshold for BPV signal faults. | |||||||||||||
| CsetMiCRCErrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.39 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port error count hreshold for CRC signal faults. | |||||||||||||
| CsetMiCRCClrCnt | 1.3.6.1.4.1.601.3.1.1.3.7.4.1.40 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port clear count threshold for CRC signal faults. | |||||||||||||
| NsetupCcInp | 1.3.6.1.4.1.601.3.1.1.3.8 | ||||||||||||
| TsetCcInpTable | 1.3.6.1.4.1.601.3.1.1.3.8.2 | NA | |||||||||||
table · not-accessible · current The list of CC Input attribute setup information. | |||||||||||||
| RsetCiEntry | 1.3.6.1.4.1.601.3.1.1.3.8.2.1 | NA | |||||||||||
row · not-accessible · current Input status and settings attributes.
| |||||||||||||
| CsetCiChassis | 1.3.6.1.4.1.601.3.1.1.3.8.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside in chassis 1 (main chassis). | |||||||||||||
| CsetCiSlot | 1.3.6.1.4.1.601.3.1.1.3.8.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetCiPort | 1.3.6.1.4.1.601.3.1.1.3.8.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetCiEnable | 1.3.6.1.4.1.601.3.1.1.3.8.2.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the input port to enabled or disabled. | |||||||||||||
| CsetCiProvPql | 1.3.6.1.4.1.601.3.1.1.3.8.2.1.7 | INTEGER (1..9) | RW | ||||||||||
column · INTEGER (1..9) · read-write · current Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. | |||||||||||||
| CsetCiPriority | 1.3.6.1.4.1.601.3.1.1.3.8.2.1.8 | INTEGER (0..10) | RW | ||||||||||
column · INTEGER (0..10) · read-write · current Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. | |||||||||||||
| CsetCiZeroPhase | 1.3.6.1.4.1.601.3.1.1.3.8.2.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero. Note: This field only is meaningful during the write operation.
| |||||||||||||
| TsetAlmThCcInpTable | 1.3.6.1.4.1.601.3.1.1.3.8.4 | NA | |||||||||||
table · not-accessible · current A list of CC input alarm attributes and settings information. | |||||||||||||
| RsetCimEntry | 1.3.6.1.4.1.601.3.1.1.3.8.4.1 | NA | |||||||||||
row · not-accessible · current Input alarm attributes and settings.
setMiChassis
Identifies which chassis is being addressed.
setMiSlot
Identifies which slot position is being addressed.
setMiPort
Identifies which port position is being addressed.
setCimLOSErrCnt
Set the input port error count threshold for LOS signal faults.
setCimLOSClrCnt
Set the input port clear count threshold for LOS signal faults.
setCimBPVErrCnt
Set the input port error count threshold for BPV signal faults.
setCimBPVClrCnt
Set the input port clear count threshold for BPV signal faults.
| |||||||||||||
| CsetCimChassis | 1.3.6.1.4.1.601.3.1.1.3.8.4.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CsetCimSlot | 1.3.6.1.4.1.601.3.1.1.3.8.4.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetCimPort | 1.3.6.1.4.1.601.3.1.1.3.8.4.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetCimLOSErrCnt | 1.3.6.1.4.1.601.3.1.1.3.8.4.1.4 | INTEGER (1..100) | RW | ||||||||||
column · INTEGER (1..100) · read-write · current Set the input port error count threshold for LOS signal faults. | |||||||||||||
| CsetCimLOSClrCnt | 1.3.6.1.4.1.601.3.1.1.3.8.4.1.5 | INTEGER (1..100) | RW | ||||||||||
column · INTEGER (1..100) · read-write · current Set the input port clear count threshold for LOS signal faults. | |||||||||||||
| CsetCimBPVErrCnt | 1.3.6.1.4.1.601.3.1.1.3.8.4.1.10 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port error count threshold for BPV signal faults. | |||||||||||||
| CsetCimBPVClrCnt | 1.3.6.1.4.1.601.3.1.1.3.8.4.1.11 | INTEGER (1..10000) | RW | ||||||||||
column · INTEGER (1..10000) · read-write · current Set the input port clear count threshold for BPV signal faults. | |||||||||||||
| NsetupDs1Out | 1.3.6.1.4.1.601.3.1.1.3.10 | ||||||||||||
| TsetDsTable | 1.3.6.1.4.1.601.3.1.1.3.10.2 | NA | |||||||||||
table · not-accessible · current A list of DS1 output module status and settings. | |||||||||||||
| RsetDsEntry | 1.3.6.1.4.1.601.3.1.1.3.10.2.1 | NA | |||||||||||
| CsetDsChassis | 1.3.6.1.4.1.601.3.1.1.3.10.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetDsSlot | 1.3.6.1.4.1.601.3.1.1.3.10.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetDsFrame | 1.3.6.1.4.1.601.3.1.1.3.10.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the output signal framing mode. The T1 framing mode is ESF or D4.
| |||||||||||||
| CsetDsBypass | 1.3.6.1.4.1.601.3.1.1.3.10.2.1.4 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| CsetDsZs | 1.3.6.1.4.1.601.3.1.1.3.10.2.1.5 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the Zero Suppression to enable or disable. | |||||||||||||
| CsetDsEnable | 1.3.6.1.4.1.601.3.1.1.3.10.2.1.6 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetDsLength | 1.3.6.1.4.1.601.3.1.1.3.10.2.1.7 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the cable length compensation for the output port. Cable length definitions: 1 = 133 ft 2 = 266 ft 3 = 399 ft 4 = 533 ft 5 = 655 ft Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| NsetupE1Out | 1.3.6.1.4.1.601.3.1.1.3.11 | ||||||||||||
| TsetE1Table | 1.3.6.1.4.1.601.3.1.1.3.11.2 | NA | |||||||||||
table · not-accessible · current A list of DS1 output module status and settings. | |||||||||||||
| RsetE1Entry | 1.3.6.1.4.1.601.3.1.1.3.11.2.1 | NA | |||||||||||
| CsetE1Chassis | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetE1Slot | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetE1Frame | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the output signal framing mode. 1=ccs 2=cas
| |||||||||||||
| CsetE1Bypass | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.4 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| CsetE1Zs | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.5 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the Zero Suppression to enable or disable. | |||||||||||||
| CsetE1Crc | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.6 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the CRC error checking to enable or disable. | |||||||||||||
| CsetE1SsmBit | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.7 | INTEGER (4..8) | RW | ||||||||||
column · INTEGER (4..8) · read-write · current Set output module E1 SSM bit position. bit=4 - 8 Note: This field is only valid for E1 output module. | |||||||||||||
| CsetE1Enable | 1.3.6.1.4.1.601.3.1.1.3.11.2.1.8 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| Nsetup2048Out | 1.3.6.1.4.1.601.3.1.1.3.12 | ||||||||||||
| TsetCoTable | 1.3.6.1.4.1.601.3.1.1.3.12.2 | NA | |||||||||||
table · not-accessible · current A list of 2048kHz output module status and settings. | |||||||||||||
| RsetCoEntry | 1.3.6.1.4.1.601.3.1.1.3.12.2.1 | NA | |||||||||||
| CsetCoChassis | 1.3.6.1.4.1.601.3.1.1.3.12.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetCoSlot | 1.3.6.1.4.1.601.3.1.1.3.12.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetCoBypass | 1.3.6.1.4.1.601.3.1.1.3.12.2.1.3 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| CsetCoFltMode | 1.3.6.1.4.1.601.3.1.1.3.12.2.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the signal fault mode for low level output signals off(1), -- will turn off the output and requires user issued command to turn it back on on(2), -- will not turn off when fault detected auto(3) -- will turn off the output and automatically turn back on when fault clears
| |||||||||||||
| CsetCoEnable | 1.3.6.1.4.1.601.3.1.1.3.12.2.1.5 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetCoSquelch | 1.3.6.1.4.1.601.3.1.1.3.12.2.1.6 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set PQL threshold to turn port off. If the system PQL is below the PWL threshold the port is turned off (i.e. squelched). Note: Byte 1 = port 1, byte 20 = port 20. The PQL value of each byte defined as follows: 0 = disabled 1-16 = Provision PQL value | |||||||||||||
| NsetupCCOut | 1.3.6.1.4.1.601.3.1.1.3.13 | ||||||||||||
| TsetCcTable | 1.3.6.1.4.1.601.3.1.1.3.13.2 | NA | |||||||||||
table · not-accessible · current A list of Composite Clock (CC) output module status and settings. | |||||||||||||
| RsetCcEntry | 1.3.6.1.4.1.601.3.1.1.3.13.2.1 | NA | |||||||||||
| CsetCcChassis | 1.3.6.1.4.1.601.3.1.1.3.13.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each CC Output entry. | |||||||||||||
| CsetCcSlot | 1.3.6.1.4.1.601.3.1.1.3.13.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each CC Output entry. | |||||||||||||
| CsetCcBypass | 1.3.6.1.4.1.601.3.1.1.3.13.2.1.3 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| CsetCcEnable | 1.3.6.1.4.1.601.3.1.1.3.13.2.1.4 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetCcDuty | 1.3.6.1.4.1.601.3.1.1.3.13.2.1.5 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output duty cycle for the output ports. 1 = 63/37 duty cycle. 2 = 50/50 duty cycle. Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetCcComp | 1.3.6.1.4.1.601.3.1.1.3.13.2.1.6 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output phase (cable) compensation for the output ports. The equivalent cable length: 1 = 2200 ft, 2 = 1925 ft, 3 = 1650 ft, 4 = 1375 ft, 5 = 1100 ft, 6 = 825 ft, 7 = 550 ft, 8 = 275 ft. Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| Nsetup422Out | 1.3.6.1.4.1.601.3.1.1.3.14 | ||||||||||||
| Tset422oTable | 1.3.6.1.4.1.601.3.1.1.3.14.2 | NA | |||||||||||
table · not-accessible · current A list of 2048kHz output module status and settings. | |||||||||||||
| Rset422oEntry | 1.3.6.1.4.1.601.3.1.1.3.14.2.1 | NA | |||||||||||
| Cset422oChassis | 1.3.6.1.4.1.601.3.1.1.3.14.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| Cset422oSlot | 1.3.6.1.4.1.601.3.1.1.3.14.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| Cset422oBypass | 1.3.6.1.4.1.601.3.1.1.3.14.2.1.3 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| Cset422oFltMode | 1.3.6.1.4.1.601.3.1.1.3.14.2.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the signal fault mode for low level output signals off(1), -- will turn off the output and requires user issued command to turn it back on on(2), -- will not turn off when fault detected auto(3) -- will turn off the output and automatically turn back on when fault clears
| |||||||||||||
| Cset422oEnable | 1.3.6.1.4.1.601.3.1.1.3.14.2.1.5 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| Cset422oFrequency | 1.3.6.1.4.1.601.3.1.1.3.14.2.1.6 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set frequency for each port on an RS422 output module. word 1 = port 1, word 10 = port 10. The frequency value of each port defined as follows: 0 = 4kHz, 1-512 = 8kHz to 4096kHz with 8kHz per step. Note: each port use 2-bytes to set frequency. User can only set frequency on port 1 thru port 10. The port 1 and 11, port 2 and 12,.., port 10 and 20 have the same frequency setting. For example, when you set port1, you are set the same frequency for port 11. | |||||||||||||
| NsetupE12048Out | 1.3.6.1.4.1.601.3.1.1.3.15 | ||||||||||||
| TsetE12048oTable | 1.3.6.1.4.1.601.3.1.1.3.15.2 | NA | |||||||||||
table · not-accessible · current A list of E1/2048 output module status and settings. | |||||||||||||
| RsetE12048oEntry | 1.3.6.1.4.1.601.3.1.1.3.15.2.1 | NA | |||||||||||
| CsetE12048oChassis | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetE12048oSlot | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetE12048oBypass | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.3 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| CsetE12048oZs | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.4 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the Zero Suppression to enable or disable. | |||||||||||||
| CsetE12048oSignal | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.5 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to E1 or 2048kHz. 1 = E1 2 = 2048 kHz Note: byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetE12048oEnable | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.6 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetE12048oSquelch | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.7 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the PQL squelch threshold for each port. If a PQL threshold is below the system PQL, this port is turned off (i.e. squelched). 0 = disabled 1-16 = Provision PQL value Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetE12048oFrame | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set E1 output signal framer mode. 1 = CCS 2 = CAS
| |||||||||||||
| CsetE12048oCrc | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.9 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set E1 output CRC error checking to on or off. | |||||||||||||
| CsetE12048oSsm | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.10 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set E1 output SSM generation to on or off. | |||||||||||||
| CsetE12048oSsmBit | 1.3.6.1.4.1.601.3.1.1.3.15.2.1.11 | INTEGER (4..8) | RW | ||||||||||
column · INTEGER (4..8) · read-write · current Set E1 output SSM bit position. bit position = 4 - 8 Note: This field is only valid for E1 output module. | |||||||||||||
| NsetupLrm | 1.3.6.1.4.1.601.3.1.1.3.16 | ||||||||||||
| TsetLrmPTable | 1.3.6.1.4.1.601.3.1.1.3.16.2 | NA | |||||||||||
table · not-accessible · current A list of DS1 LRM ports status and settings. | |||||||||||||
| RsetLrmPEntry | 1.3.6.1.4.1.601.3.1.1.3.16.2.1 | NA | |||||||||||
| CsetLrmPChassis | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. | |||||||||||||
| CsetLrmPSlot | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetLrmPPort | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.3 | INTEGER (1..4) | NA | ||||||||||
column · INTEGER (1..4) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetLrmPEnable | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.4 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the LRM ports to enabled or disabled. | |||||||||||||
| CsetLrmPLbo | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the Line Build-Out for the LRM port. 1=lbo133ft 2=lbo266ft 3=lbo399ft 4=lbo533ft 5=lbo655ft
| |||||||||||||
| CsetLrmPSlip | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.6 | INTEGER (0..255) | RW | ||||||||||
column · INTEGER (0..255) · read-write · current Set the slip error threshold in 24 hours period and the value zero shall clear the slip accumulated errors. | |||||||||||||
| CsetLrmPBpv | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Clear the accumulated BPV errors clr(1), -- clear the accumulated BPV errors nop(2) -- no operation Note: This field only has meaning for a write operation.
| |||||||||||||
| CsetLrmPFlt | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the Side 1 fault strategy
| |||||||||||||
| CsetLrmPCid | 1.3.6.1.4.1.601.3.1.1.3.16.2.1.9 | DisplayString (SIZE (0..43)) | RW | ||||||||||
column · DisplayString (SIZE (0..43)) · read-write · current Set the circuit id for LRM port The circuit id is an 0-43 character string with all ascii printable characters. | |||||||||||||
| NsetupSineOut | 1.3.6.1.4.1.601.3.1.1.3.17 | ||||||||||||
| TsetSineoTable | 1.3.6.1.4.1.601.3.1.1.3.17.2 | NA | |||||||||||
table · not-accessible · current A list of Sine output status and settings. | |||||||||||||
| RsetSineoEntry | 1.3.6.1.4.1.601.3.1.1.3.17.2.1 | NA | |||||||||||
| CsetSineoChassis | 1.3.6.1.4.1.601.3.1.1.3.17.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetSineoSlot | 1.3.6.1.4.1.601.3.1.1.3.17.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetSineoBypass | 1.3.6.1.4.1.601.3.1.1.3.17.2.1.3 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| CsetSineoFrequency | 1.3.6.1.4.1.601.3.1.1.3.17.2.1.4 | INTEGER (1544 | 6312) | RW | ||||||||||
column · INTEGER (1544 | 6312) · read-write · current Set the output frequency 1.544 or 6.312 MHz. | |||||||||||||
| CsetSineoEnable | 1.3.6.1.4.1.601.3.1.1.3.17.2.1.5 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetSineoSquelch | 1.3.6.1.4.1.601.3.1.1.3.17.2.1.6 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set PQL threshold to turn port off. If the system PQL is below the PWL threshold the port is turned off (i.e. squelched). Note: Byte 1 = port 1, byte 20 = port 20. The PQL value of each byte defined as follows: 0 = disabled 1-16 = Provision PQL value | |||||||||||||
| NsetupSineInp | 1.3.6.1.4.1.601.3.1.1.3.18 | ||||||||||||
| TsetSineInpTable | 1.3.6.1.4.1.601.3.1.1.3.18.2 | NA | |||||||||||
table · not-accessible · current The list of Sine Input attribute setup information. | |||||||||||||
| RsetSineiEntry | 1.3.6.1.4.1.601.3.1.1.3.18.2.1 | NA | |||||||||||
row · not-accessible · current Input status and settings attributes. | |||||||||||||
| CsetSineiChassis | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside in chassis 1 (main chassis). | |||||||||||||
| CsetSineiSlot | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetSineiPort | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetSineiEnable | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the input port to enabled or disabled. | |||||||||||||
| CsetSineiFrequency | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.5 | INTEGER (1544 | 6312) | RW | ||||||||||
column · INTEGER (1544 | 6312) · read-write · current Set input signal frequency. The frequency can be set: 1.544MHZ/ 6.312MHz. | |||||||||||||
| CsetSineiProvPql | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.6 | INTEGER (1..9) | RW | ||||||||||
column · INTEGER (1..9) · read-write · current Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. | |||||||||||||
| CsetSineiPriority | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.7 | INTEGER (0..10) | RW | ||||||||||
column · INTEGER (0..10) · read-write · current Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. | |||||||||||||
| CsetSineiCSFlt | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set input Port 1 for external Cesium (CS) fault alarm logic level. off(1), -- function is disabled low(2), -- function is enabled, will trigger on low (0V) level high(3), -- function is enabled, will trigger on high (+5v) level na(4) -- not applicable Note: only available for port one.
| |||||||||||||
| CsetSineiZeroPhase | 1.3.6.1.4.1.601.3.1.1.3.18.2.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero. Note: This field only is meaningful during the write operation.
| |||||||||||||
| TsetAlmThSineInpTable | 1.3.6.1.4.1.601.3.1.1.3.18.4 | NA | |||||||||||
table · not-accessible · current A list of Sine input alarm attributes and settings information. | |||||||||||||
| RsetMsiEntry | 1.3.6.1.4.1.601.3.1.1.3.18.4.1 | NA | |||||||||||
row · not-accessible · current Input alarm attributes and settings.
setMsiChassis
Identifies which chassis is being addressed.
setMsiSlot
Identifies which slot position is being addressed.
setMsiPort
Identifies which port position is being addressed.
setMsiMtieStd
Set the input port setting of the MTIE limits to predefined values.
setMsiMtie10EL1
Set the input port MTIE 10 seconds error threshold for the first limit setting.
setMsiMtie10EL2
Set the input port MTIE 10 seconds error threshold for the second limit setting.
setMsiMtie10CL1
Set the input port MTIE 10 seconds clear threshold for the first limit setting.
setMsiMtie10CL2
Set the input port MTIE 10 seconds clear threshold for the second limit setting.
setMsiMtie100EL1
Set the input port MTIE 100 seconds error threshold for the first limit setting.
setMsiMtie100EL2
Set the input port MTIE 100 seconds error threshold for the second limit setting.
setMsiMtie100CL1
Set the input port MTIE 100 seconds clear threshold for the first limit setting.
setMsiMtie100CL2
Set the input port MTIE 100 seconds clear threshold for the second limit setting.
setMsiMtie1000EL1
Set the input port MTIE 1000 seconds error threshold for the first limit setting.
setMsiMtie1000EL2
Set the input port MTIE 1000 seconds error threshold for the second limit setting.
setMsiMtie1000CL1
Set the input port MTIE 1000 seconds clear threshold for the first limit setting.
setMsiMtie1000CL2
Set the input port MTIE 1000 seconds clear threshold for the second limit setting.
setMsiMtie10000EL1
Set the input port MTIE 10000 seconds error threshold for the first limit setting.
setMsiMtie10000EL2
Set the input port MTIE 10000 seconds error threshold for the second limit setting.
setMsiMtie10000CL1
Set the input port MTIE 10000 seconds clear threshold for the first limit setting.
setMsiMtie10000CL2
Set the input port MTIE 10000 seconds clear threshold for the second limit setting.
setMsiMtie100000EL1
Set the input port MTIE 100000 seconds error threshold for the first limit setting.
setMsiMtie100000EL2
Set the input port MTIE 100000 seconds error threshold for the second limit setting.
setMsiMtie100000CL1
Set the input port MTIE 100000 seconds clear threshold for the first limit setting.
setMsiMtie100000CL2
Set the input port MTIE 100000 seconds clear threshold for the second limit setting.
setMsiFreqAErrLmt
Set the input port frequency error threshold for clock A.
setMsiFreqAClrLmt
Set the input port frequency clear threshold for clock A.
setMsiFreqATau
Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock A.
setMsiFreqBErrLmt
Set the input port frequency error threshold for clock B.
setMsiFreqBClrLmt
Set the input port frequency clear threshold for clock B.
setMsiFreqBTau
Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock B.
| |||||||||||||
| CsetMsiChassis | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, this number is always one. (i.e. in the main chassis) | |||||||||||||
| CsetMsiSlot | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetMsiPort | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. | |||||||||||||
| CsetMsiMtieStd | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the input port setting of the MTIE limits to predefined values. prs(1), -- ANSI T1.101 PRS MTIE MASK ds1(2), -- ANSI T1.101 DS1 MTIE MASK g811(3), -- G.811 (PRC) MTIE MASK g823(4) -- G.823 (SSU) MTIE MASK This field is only meaningful for a write operation.
| |||||||||||||
| CsetMsiMtie10EL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.5 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie10EL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.6 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie10CL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.7 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie10CL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.8 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie100EL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.9 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie100EL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.10 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie100CL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.11 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie100CL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.12 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie1000EL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.13 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie1000EL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.14 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie1000CL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.15 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie1000CL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.16 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 1000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie10000EL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.17 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie10000EL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.18 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie10000CL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.19 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie10000CL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.20 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 10000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie100000EL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.21 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds error threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie100000EL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.22 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds error threshold for the second limit setting. | |||||||||||||
| CsetMsiMtie100000CL1 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.23 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds clear threshold for the first limit setting. | |||||||||||||
| CsetMsiMtie100000CL2 | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.24 | INTEGER (0..60000) | RW | ||||||||||
column · INTEGER (0..60000) · read-write · current Set the input port MTIE 100000 seconds clear threshold for the second limit setting. | |||||||||||||
| CsetMsiFreqAErrLmt | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.25 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Sets input port frequency error threshold for clock A. | |||||||||||||
| CsetMsiFreqAClrLmt | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.26 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Sets input port frequency clear threshold for clock A. | |||||||||||||
| CsetMsiFreqATau | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.27 | INTEGER (10..1000) | RW | ||||||||||
column · INTEGER (10..1000) · read-write · current Sets the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock A. | |||||||||||||
| CsetMsiFreqBErrLmt | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.28 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Sets input port frequency error threshold for clock B. | |||||||||||||
| CsetMsiFreqBClrLmt | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.29 | INTEGER (0..10000000) | RW | ||||||||||
column · INTEGER (0..10000000) · read-write · current Sets input port frequency clear threshold for clock B. | |||||||||||||
| CsetMsiFreqBTau | 1.3.6.1.4.1.601.3.1.1.3.18.4.1.30 | INTEGER (10..1000) | RW | ||||||||||
column · INTEGER (10..1000) · read-write · current Sets the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock B. | |||||||||||||
| NsetupJccOut | 1.3.6.1.4.1.601.3.1.1.3.19 | ||||||||||||
| TsetJccoTable | 1.3.6.1.4.1.601.3.1.1.3.19.2 | NA | |||||||||||
table · not-accessible · current A list of JCC output status and settings. | |||||||||||||
| RsetJccoEntry | 1.3.6.1.4.1.601.3.1.1.3.19.2.1 | NA | |||||||||||
| CsetJccoChassis | 1.3.6.1.4.1.601.3.1.1.3.19.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each JCC Output entry. | |||||||||||||
| CsetJccoSlot | 1.3.6.1.4.1.601.3.1.1.3.19.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each JCC Output entry. | |||||||||||||
| CsetJccoBypass | 1.3.6.1.4.1.601.3.1.1.3.19.2.1.3 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set Clock C, or bypass mode, to enable or disable. | |||||||||||||
| CsetJcco400Hz | 1.3.6.1.4.1.601.3.1.1.3.19.2.1.4 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the 400Hz BPV removal. A setting OFF removes this 400Hz component, and a setting ON includes it. | |||||||||||||
| CsetJccoEnable | 1.3.6.1.4.1.601.3.1.1.3.19.2.1.5 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current Set the JCC output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. | |||||||||||||
| CsetJccoComp | 1.3.6.1.4.1.601.3.1.1.3.19.2.1.6 | OCTET STRING (SIZE (20)) | RW | ||||||||||
column · OCTET STRING (SIZE (20)) · read-write · current The array represents the output phase compensation for all ports on an output module. Note: Byte 1 = port 1, byte 20 = port 20. The specifed byte value is 1 thru 8. 1 = no delay, 8 = highest delay. The equivalent cable length: 1 = 2200 ft, 2 = 1925 ft, 3 = 1650 ft, 4 = 1375 ft, 5 = 1100 ft, 6 = 825 ft, 7 = 550 ft, 8 = 275 ft. | |||||||||||||
| NsetupJccInp | 1.3.6.1.4.1.601.3.1.1.3.20 | ||||||||||||
| TsetJccInpTable | 1.3.6.1.4.1.601.3.1.1.3.20.2 | NA | |||||||||||
table · not-accessible · current The list of CC Input attribute setup information. | |||||||||||||
| RsetJcciEntry | 1.3.6.1.4.1.601.3.1.1.3.20.2.1 | NA | |||||||||||
row · not-accessible · current Input status and settings attributes.
| |||||||||||||
| CsetJcciChassis | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside in chassis 1 (main chassis). | |||||||||||||
| CsetJcciSlot | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetJcciPort | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port position is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CsetJcciEnable | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the input port to enabled or disabled. | |||||||||||||
| CsetJcciProvPql | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.5 | INTEGER (1..9) | RW | ||||||||||
column · INTEGER (1..9) · read-write · current Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. | |||||||||||||
| CsetJcciPriority | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.6 | INTEGER (0..10) | RW | ||||||||||
column · INTEGER (0..10) · read-write · current Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. | |||||||||||||
| CsetJcci400Hz | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.7 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the input port 400Hz signal attribute. | |||||||||||||
| CsetJcciZeroPhase | 1.3.6.1.4.1.601.3.1.1.3.20.2.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero. Note: This field only is meaningful during the write operation.
| |||||||||||||
| NsetupLrmE1 | 1.3.6.1.4.1.601.3.1.1.3.21 | ||||||||||||
| TsetLrme1PTable | 1.3.6.1.4.1.601.3.1.1.3.21.2 | NA | |||||||||||
table · not-accessible · current A list of E1 LRM ports status and settings. | |||||||||||||
| RsetLrme1PEntry | 1.3.6.1.4.1.601.3.1.1.3.21.2.1 | NA | |||||||||||
row · not-accessible · current Set E1 LRM attributes. | |||||||||||||
| CsetLrme1PChassis | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. | |||||||||||||
| CsetLrme1PSlot | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. | |||||||||||||
| CsetLrme1PPort | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.3 | INTEGER (1..4) | NA | ||||||||||
column · INTEGER (1..4) · not-accessible · current Identifies which port is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. | |||||||||||||
| CsetLrme1PEnable | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.4 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the LRM ports to enabled or disabled. | |||||||||||||
| CsetLrme1PSlip | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.5 | INTEGER (0..255) | RW | ||||||||||
column · INTEGER (0..255) · read-write · current Set the slip error threshold in 24 hours period and the value zero shall clear the slip accumulated errors. | |||||||||||||
| CsetLrme1PBpv | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Clear the accumulated BPV errors clr(1), -- clear the accumulated BPV errors nop(2) -- no operation Note: This field only has meaning for a write operation.
| |||||||||||||
| CsetLrme1PFlt | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the Side 1 fault strategy
| |||||||||||||
| CsetLrme1PCid | 1.3.6.1.4.1.601.3.1.1.3.21.2.1.8 | DisplayString (SIZE (0..43)) | RW | ||||||||||
column · DisplayString (SIZE (0..43)) · read-write · current Set the circuit id for LRM port The circuit id is an 0-43 character string with all ascii printable characters. | |||||||||||||
| NsetupPtNtp | 1.3.6.1.4.1.601.3.1.1.3.22 | ||||||||||||
| TsetPtNtpTable | 1.3.6.1.4.1.601.3.1.1.3.22.1 | NA | |||||||||||
table · not-accessible · current A list of PackeTime NTP status and settings. | |||||||||||||
| RsetPtNtpEntry | 1.3.6.1.4.1.601.3.1.1.3.22.1.1 | NA | |||||||||||
row · not-accessible · current PackeTime NTP settings and attributes.
| |||||||||||||
| CsetPtNtpChassis | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each entry. | |||||||||||||
| CsetPtNtpSlot | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each entry. | |||||||||||||
| CsetPtNtpCommit | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Commit all provisioned parameters, this action makes the parameters active. This command will also store the parameters to non-volatile memory. Note: This field only has meaning for a writing (1).
| |||||||||||||
| CsetPtNtpProbe | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the PackeTime Maintenance Port state; Enable or Disable. This node is obsolete, The setting is NOP. | |||||||||||||
| CsetPtNtpBond | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.5 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set Service port bonding state. 1 = Enabled 2 = Disabled | |||||||||||||
| CsetPtNtpNTPd | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.6 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the NTP daemon state. 1 = Enabled 2 = Disabled | |||||||||||||
| CsetPtNtpTodsrcPrefer | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the module's preferred time-source to be either TODSRC (1) or PEER (2). TOD Source, either the TODSRC (GPS) or a NTP Peer if operating in Client mode
| |||||||||||||
| CsetPtNtpTodsrcPriority | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.8 | INTEGER (0..8) | RW | ||||||||||
column · INTEGER (0..8) · read-write · current Set the Todsrc priority. The priority is the for the specified module as the TOD Source, default is 0, range can be 0 through 8. Value 1 is the highest, and 8 is the lowest. If the value is zero, the specified module cannot be TOD Source. | |||||||||||||
| CsetPtNtpWeight | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.9 | INTEGER (-1..100) | RW | ||||||||||
column · INTEGER (-1..100) · read-write · current Set the load distribution between portA/B in percent. For example, 70 means port-A get 70% of total bandwidth, port-B gets remaining 30%. If port-A reaches 70% of total bandwidth but port-B has no traffic, the 30% of bandwidth will be wasted, port-A cannot use it. To allow either port to use all the bandwidth, portAWeight can be set to -1, indicating no limit between port-A and port-B (either port-A or port-B can get all the bandwidth, based on first come first serve). Thus the range of this parameter -1 to 100. For bonding mode, this parameter must be forced to -1, so the active port can use 100% of the bandwidth. For non-bonding mode, user can set any value between -1 to 100. | |||||||||||||
| CsetPtNtpCompensation | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.10 | INTEGER (0..250) | RW | ||||||||||
column · INTEGER (0..250) · read-write · current Set the Antenna cable delay compensation in the case of GPS ToD Source(s) or the delay induced by the cable(s) used to connect expansion shelves where the PackeTime ToD Source(s) is located in relationship to the Main shelf. The time offset shall have a 100nS resolution, thus the Delay value shall be multiplied by 100nS to provide 1PPS compensation. Valid user compensation values range is 0 thru 250 for a total compensation range of 0 to 25000nS (25uS). | |||||||||||||
| CsetPtNtpPeerTimeout | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.11 | INTEGER (60..10000) | RW | ||||||||||
column · INTEGER (60..10000) · read-write · current Set the Peer Availability Timeout The timer shall have a user settable range from 60 minutes to 10000 minutes, with a default value of 1440 minutes | |||||||||||||
| CsetPtNtpPeerPrefer | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.12 | INTEGER (0..8) | RW | ||||||||||
column · INTEGER (0..8) · read-write · current Set the preferred peer from the peer list. The valid value is 0-8. The value zero means, there is no prefer. This value has meaning, only when the specified peer is in the peer list. | |||||||||||||
| CsetPtNtpBypass | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.13 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the clock C state, or bypass clock, to enabled or disabled. | |||||||||||||
| CsetPtNtpModActive | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.14 | YesValue | RW | ||||||||||
column · YesValue · read-write · current Set the specified module in the redundant pair to be Active. Note1: This command only applies when the module in the redundant pair. Note2: This field only has meaning for a writing (1). Note3: Don't apply COMMIT after this command. | |||||||||||||
| CsetPtNtpPAActive | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.15 | YesValue | RW | ||||||||||
column · YesValue · read-write · current Set Port A is being manually selected as the active port. Note1: This command only applies when the bonding mode is enabled and both ports are in network and Ethernet link up. Note2: This field only has meaning for a writing (1). Note3: Don't apply COMMIT after this command. | |||||||||||||
| CsetPtNtpPBActive | 1.3.6.1.4.1.601.3.1.1.3.22.1.1.16 | YesValue | RW | ||||||||||
column · YesValue · read-write · current Set Port B is being manually selected as the active port. Note1: This command only applies when the bonding mode is enabled and both ports are in network and Ethernet link up. Note2: This field only has meaning for a writing (1). Note3: Don't apply COMMIT after this command. | |||||||||||||
| TsetPtNtpPortTable | 1.3.6.1.4.1.601.3.1.1.3.22.2 | NA | |||||||||||
table · not-accessible · current PackeTime NTP ethernet port information. | |||||||||||||
| RsetPtNtpPortEntry | 1.3.6.1.4.1.601.3.1.1.3.22.2.1 | NA | |||||||||||
row · not-accessible · current PackeTime NTP ethernet port state and settings information.
setPtNtpPortChassis
Identifies which chassis is being addressed.
setPtNtpPortSlot
Identifies which slot is being addressed.
setPtNtpPortNum
Identifies which port is being addressed.
setPtNtpPortAddr
Set the port IP address
setPtNtpPortMask
Set the port network mask
setPtNtpPortGate
Set the port gateway address | |||||||||||||
| CsetPtNtpPortChassis | 1.3.6.1.4.1.601.3.1.1.3.22.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis, slot, and port number uniquely identify each entry. | |||||||||||||
| CsetPtNtpPortSlot | 1.3.6.1.4.1.601.3.1.1.3.22.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis, slot, and port number uniquely identify each entry. | |||||||||||||
| CsetPtNtpPortNum | 1.3.6.1.4.1.601.3.1.1.3.22.2.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis, slot, and port number uniquely identify each entry. PTNTP ethernet interface number. 1 = Service Port A 2 = Service Port B 3 = Maintenance Port | |||||||||||||
| CsetPtNtpPortAddr | 1.3.6.1.4.1.601.3.1.1.3.22.2.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the port IP address | |||||||||||||
| CsetPtNtpPortMask | 1.3.6.1.4.1.601.3.1.1.3.22.2.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the port network mask | |||||||||||||
| CsetPtNtpPortGate | 1.3.6.1.4.1.601.3.1.1.3.22.2.1.6 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the port gateway address | |||||||||||||
| TsetPtNtpPeerTable | 1.3.6.1.4.1.601.3.1.1.3.22.3 | NA | |||||||||||
table · not-accessible · current List of PackeTime NTP Peer entries. Entries are indexed by the values of setPtNtpPeerChassis, setPtNtpPeerSlot and setPtNtpPortNum. | |||||||||||||
| RsetPtNtpPeerEntry | 1.3.6.1.4.1.601.3.1.1.3.22.3.1 | NA | |||||||||||
row · not-accessible · current Set PackeTime NTP peer state and settings.
setPtNtpPeerChassis
Identifies which chassis is being addressed.
setPtNtpPeerSlot
Identifies which slot is being addressed.
setPtNtpPeerNum
Identifies which ntp peer is being addressed.
setPtNtpPeerAddr
Set Peer IP address in peer table.
setPtNtpPeerPmin
Set the minimum request rate in seconds for CLIENT mode.
setPtNtpPeerPmax
Set the maximum request rate in seconds for CLIENT mode.
setPtNtpPeerKeyId
Set keyId to be used to lookup authentication key, | |||||||||||||
| CsetPtNtpPeerChassis | 1.3.6.1.4.1.601.3.1.1.3.22.3.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis, slot, and peer number uniquely identify each entry. | |||||||||||||
| CsetPtNtpPeerSlot | 1.3.6.1.4.1.601.3.1.1.3.22.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis, slot, and peer number uniquely identify each entry. | |||||||||||||
| CsetPtNtpPeerNum | 1.3.6.1.4.1.601.3.1.1.3.22.3.1.3 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Identifies which ntp peer is being addressed. This chassis, slot, and peer number uniquely identify each entry. | |||||||||||||
| CsetPtNtpPeerAddr | 1.3.6.1.4.1.601.3.1.1.3.22.3.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set Peer IP address in peer table. Write zero IP address will delete this IP address from peer table. | |||||||||||||
| CsetPtNtpPeerPmin | 1.3.6.1.4.1.601.3.1.1.3.22.3.1.5 | INTEGER (16 | 32 | 64 | 128 | 256 | 512 | 1024) | RW | ||||||||||
column · INTEGER (16 | 32 | 64 | 128 | 256 | 512 | 1024) · read-write · current Set the minimum request rate in seconds for CLIENT mode, the default is 16, the range is 16, 32, 64, 128, 256, 512, and 1024. | |||||||||||||
| CsetPtNtpPeerPmax | 1.3.6.1.4.1.601.3.1.1.3.22.3.1.6 | INTEGER (16 | 32 | 64 | 128 | 256 | 512 | 1024) | RW | ||||||||||
column · INTEGER (16 | 32 | 64 | 128 | 256 | 512 | 1024) · read-write · current Set the maximum request rate in seconds for CLIENT mode, the default is 64, the range is 16, 32, 64, 128, 256, 512, and 1024. | |||||||||||||
| CsetPtNtpPeerKeyId | 1.3.6.1.4.1.601.3.1.1.3.22.3.1.7 | INTEGER (0..65534) | RW | ||||||||||
column · INTEGER (0..65534) · read-write · current Set keyId to be used to lookup authentication key, the default is 0 (no authentication), the range is 0 through 65534 | |||||||||||||
| TsetPtNtpAuthTable | 1.3.6.1.4.1.601.3.1.1.3.22.4 | NA | |||||||||||
table · not-accessible · current A list of PackeTime NTP authentication entries. The number of entries are given by the values of setPtNtpAuthChassis, setPtNtpAuthSlot and setPtNtpAuthNum. | |||||||||||||
| RsetPtNtpAuthEntry | 1.3.6.1.4.1.601.3.1.1.3.22.4.1 | NA | |||||||||||
row · not-accessible · current Set PackeTime NTP authentication state and settings.
PackeTime NTP authentication attributes.
setPtNtpAuthChassis
Identifies which chassis is being addressed.
setPtNtpAuthSlot
Identifies which slot is being addressed.
setPtNtpAuthNum
Identifies which authentication key is being addressed.
setPtNtpAuthKeyId
Set the authentication key ID,
setPtNtpAuthKeyValue
Set the NTP authentication key used to create the MD5 hash associated with the keyid. | |||||||||||||
| CsetPtNtpAuthChassis | 1.3.6.1.4.1.601.3.1.1.3.22.4.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis, slot, and authentication key number uniquely identify each entry. | |||||||||||||
| CsetPtNtpAuthSlot | 1.3.6.1.4.1.601.3.1.1.3.22.4.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis, slot, and authentication key number uniquely identify each entry. | |||||||||||||
| CsetPtNtpAuthNum | 1.3.6.1.4.1.601.3.1.1.3.22.4.1.3 | INTEGER (1..16) | NA | ||||||||||
column · INTEGER (1..16) · not-accessible · current Identifies which authentication key is being addressed. This chassis, slot, and authentication key number uniquely identify each entry. | |||||||||||||
| CsetPtNtpAuthKeyId | 1.3.6.1.4.1.601.3.1.1.3.22.4.1.4 | INTEGER (0..65534) | RW | ||||||||||
column · INTEGER (0..65534) · read-write · current Set KeyId is the authentication key ID, default is 0 (no authentication), range 0 to 65534. Note: If this value is zero, no authentication is used. | |||||||||||||
| CsetPtNtpAuthKeyValue | 1.3.6.1.4.1.601.3.1.1.3.22.4.1.5 | DisplayString (SIZE (0 | 8..32)) | RW | ||||||||||
column · DisplayString (SIZE (0 | 8..32)) · read-write · current Set the key is the NTP authentication key used to create the MD5 hash associated with the keyid. The key is a comprised of up to 32 ASCII characters, a minimum of 8 characters is required. Note: the key value will not display and it is always displayed as null string. | |||||||||||||
| TsetPtNtpRouteTable | 1.3.6.1.4.1.601.3.1.1.3.22.5 | NA | |||||||||||
table · not-accessible · current A list of PackeTime NTP route table entries. Static routing describes a system that does not implement adaptive routing. In these systems routes through a data network are described by fixed paths (statically). These routes are usually entered into the host by the system administrator. | |||||||||||||
| RsetPtNtpRouteEntry | 1.3.6.1.4.1.601.3.1.1.3.22.5.1 | NA | |||||||||||
row · not-accessible · current A PackeTime NTP route attributes and settings.
setPtNtpRouteChassis
Identifies which chassis is being addressed.
setPtNtpRouteSlot
Identifies which slot is being addressed.
setPtNtpRouteNum
Identifies which route number (index) is being addressed.
setPtNtpRouteAddr
Set the route destination network or destination host.
setPtNtpRouteMask
Set the netmask for the destination network.
setPtNtpRouteGate
Set the gateway ip for the destination network.
setPtNtpRouteIface
Set the module's network interface number. | |||||||||||||
| CsetPtNtpRouteChassis | 1.3.6.1.4.1.601.3.1.1.3.22.5.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis, slot, and route number (index) uniquely identify each entry. | |||||||||||||
| CsetPtNtpRouteSlot | 1.3.6.1.4.1.601.3.1.1.3.22.5.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis, slot, and route number (index) uniquely identify each entry. | |||||||||||||
| CsetPtNtpRouteNum | 1.3.6.1.4.1.601.3.1.1.3.22.5.1.3 | INTEGER (1..6) | NA | ||||||||||
column · INTEGER (1..6) · not-accessible · current Identifies which route number is being addressed. This chassis, slot, and route number (index) uniquely identify each entry. | |||||||||||||
| CsetPtNtpRouteAddr | 1.3.6.1.4.1.601.3.1.1.3.22.5.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the route destination network or destination host. Write a new Route IP address will put this new IP into table. Write zero IP address will delete this IP address from table. | |||||||||||||
| CsetPtNtpRouteMask | 1.3.6.1.4.1.601.3.1.1.3.22.5.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the netmask for the destination network; '255.255.255.255' for a host destination and '0.0.0.0' for the default route | |||||||||||||
| CsetPtNtpRouteGate | 1.3.6.1.4.1.601.3.1.1.3.22.5.1.6 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the gateway for the destination network. | |||||||||||||
| CsetPtNtpRouteIface | 1.3.6.1.4.1.601.3.1.1.3.22.5.1.7 | INTEGER (1..3) | RW | ||||||||||
column · INTEGER (1..3) · read-write · current Set the module's network interface number: 1 = Service Port A 2 = Service Port B 3 = Bond0 (bonding of PortA and Port B) | |||||||||||||
| TsetPtNtpVlanTable | 1.3.6.1.4.1.601.3.1.1.3.22.6 | NA | |||||||||||
table · not-accessible · current List of PackeTime NTP vlan attributes. The Virtural Local Area Network is implemented per IEEE 802.1Q. | |||||||||||||
| RsetPtNtpVlanEntry | 1.3.6.1.4.1.601.3.1.1.3.22.6.1 | NA | |||||||||||
row · not-accessible · current A PackeTime NTP vlan attributes and settings:
setPtNtpVlanChassis
Identifies which chassis is being addressed.
setPtNtpVlanSlot
Identifies which slot is being addressed.
setPtNtpVlan
Set the VLAN state.
setPtNtpVlanPAId
Set the VLAN ID for Service Port A.
setPtNtpVlanPAPriority
Set the VLAN priority for Service Port A.
setPtNtpVlanPBId
Set the VLAN ID for Service Port B.
setPtNtpVlanPBPriority
Set the VLAN priority for Service Port B.
setPtNtpVlanBondId
Set the VLAN ID for Bonding of Service Ports of A and B
setPtNtpVlanBondPriority
Set the VLAN priority for Bonding of Service Ports of A and B | |||||||||||||
| CsetPtNtpVlanChassis | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis and slot number uniquely identify each entry. | |||||||||||||
| CsetPtNtpVlanSlot | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis and slot number uniquely identify each entry. | |||||||||||||
| CsetPtNtpVlan | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.3 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the VLAN state. 1 = Enabled 2 = Disabled | |||||||||||||
| CsetPtNtpVlanPAId | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.4 | INTEGER (0..4094) | RW | ||||||||||
column · INTEGER (0..4094) · read-write · current Set the VLAN ID for Service Port A, [0 - 4094] Note: The value has no meaning, only when the VLAN is enabled | |||||||||||||
| CsetPtNtpVlanPAPriority | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.5 | INTEGER (0..7) | RW | ||||||||||
column · INTEGER (0..7) · read-write · current Set the VLAN Priority for Service Port A, [0 - 7] Note: The value has no meaning, only when the VLAN is enabled | |||||||||||||
| CsetPtNtpVlanPBId | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.6 | INTEGER (0..4094) | RW | ||||||||||
column · INTEGER (0..4094) · read-write · current Set the VLAN ID for Service Port B, [0 - 4094] Note: The value has no meaning, only when the VLAN is enabled | |||||||||||||
| CsetPtNtpVlanPBPriority | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.7 | INTEGER (0..7) | RW | ||||||||||
column · INTEGER (0..7) · read-write · current Set the VLAN Priority for Service Port B, [0 - 7] Note: The value has no meaning, only when the VLAN is enabled | |||||||||||||
| CsetPtNtpVlanBondId | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.8 | INTEGER (0..4094) | RW | ||||||||||
column · INTEGER (0..4094) · read-write · current Set the VLAN ID for Bonding of Service Ports of A and B, [0 - 4094] Note: The value has no meaning, only when the VLAN is enabled | |||||||||||||
| CsetPtNtpVlanBondPriority | 1.3.6.1.4.1.601.3.1.1.3.22.6.1.9 | INTEGER (0..7) | RW | ||||||||||
column · INTEGER (0..7) · read-write · current Set the VLAN Priority for Bonding of Service Ports of A and B, [0 - 7] Note: The value has no meaning, only when the VLAN is enabled | |||||||||||||
| NsetupPtPtp | 1.3.6.1.4.1.601.3.1.1.3.23 | ||||||||||||
| TsetPtPtpTable | 1.3.6.1.4.1.601.3.1.1.3.23.1 | NA | |||||||||||
table · not-accessible · current A list of PackeTime PTP status and settings. | |||||||||||||
| RsetPtPtpEntry | 1.3.6.1.4.1.601.3.1.1.3.23.1.1 | NA | |||||||||||
row · not-accessible · current The enties of the PackeTime PTP settings and attributes.
| |||||||||||||
| CsetPtPtpChassis | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each entry. | |||||||||||||
| CsetPtPtpSlot | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each entry. | |||||||||||||
| CsetPtPtpCommit | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Commit all provisioned parameters, this action makes the parameters active. This command will also store the parameters to non-volatile memory. Note: This field only has meaning for a writing (1).
| |||||||||||||
| CsetPtPtpService | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the PTP service (daemon) to enable or disable. This command is applied to both modules if redundant cards installed. 1 = Enabled 2 = Disabled | |||||||||||||
| CsetPtPtpClockId | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.5 | OCTET STRING (SIZE (8)) | RW | ||||||||||
column · OCTET STRING (SIZE (8)) · read-write · current Set the clockId is the PTP Port Clock Identity (64-bit value). The clockid is a hexadecimal format. Note: users shall enter command COMMIT to take changes into effect | |||||||||||||
| CsetPtPtpDomain | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.6 | INTEGER (0..255) | RW | ||||||||||
column · INTEGER (0..255) · read-write · current Set the PTP port domain. Note: users shall enter command COMMIT to take changes into effect | |||||||||||||
| CsetPtPtpTimescale | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set timescale to 'PTP' or 'ARB'. Note: users shall enter command COMMIT to take changes into effect
| |||||||||||||
| CsetPtPtpSyncLimit | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.8 | INTEGER (-7..7) | RW | ||||||||||
column · INTEGER (-7..7) · read-write · current Set the unicast Sync message rate (2^y).
The range of the rate value is {-7 to 7}.
For example, the configurable range is -7, means 128 per second | |||||||||||||
| CsetPtPtpAnnounceLimit | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.9 | INTEGER (-3..4) | RW | ||||||||||
column · INTEGER (-3..4) · read-write · current Set unicast announce message rate (2^y).
The range of the rate value is {-3 to 4}.
For example, the configurable range is -3, means 8 per second | |||||||||||||
| CsetPtPtpDelayLimit | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.10 | INTEGER (-7..7) | RW | ||||||||||
column · INTEGER (-7..7) · read-write · current Set unicast delay resp message rate (2^y).
The range of the rate value is {-7 to 7}.
For example, the configurable range is -6, means 64 per second | |||||||||||||
| CsetPtPtpDscpState | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.11 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the DSCP state to enable or disable. | |||||||||||||
| CsetPtPtpDscpValue | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.12 | INTEGER (0..63) | RW | ||||||||||
column · INTEGER (0..63) · read-write · current Set DSCP value. | |||||||||||||
| CsetPtPtpMaxClient | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.13 | INTEGER (64..400) | RW | ||||||||||
column · INTEGER (64..400) · read-write · current Set the PTP max clients. | |||||||||||||
| CsetPtPtpPortPriority1 | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.14 | INTEGER (0..255) | RW | ||||||||||
column · INTEGER (0..255) · read-write · current Set the PTP Port Priority 1 {0 to 255}. | |||||||||||||
| CsetPtPtpPortPriority2 | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.15 | INTEGER (0..255) | RW | ||||||||||
column · INTEGER (0..255) · read-write · current Set the PTP Port Priority 2 {0 to 255}. | |||||||||||||
| CsetPtPtpUniLeaseDuration | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.16 | INTEGER (10..1000) | RW | ||||||||||
column · INTEGER (10..1000) · read-write · current Set the PTP Max Dynamic Unicast Lease Interval, {10 to 1000} | |||||||||||||
| CsetPtPtpUniNegotiation | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.17 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the PTP Unicast Negotiation state: Enable or Disable | |||||||||||||
| CsetPtPtpTwostep | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.18 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the PTP Two-Step clock state: Enable or Disable Note: users shall enter command COMMIT to take changes into effect | |||||||||||||
| CsetPtPtpProfile | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set PTP profile telecom_2008 or itu_g8265_1. Note: users shall enter command COMMIT to take changes into effect
| |||||||||||||
| CsetPtPtpSsmOption | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set PTP ssm-option in Option 1 or Option 2.
| |||||||||||||
| CsetPtPtpBypass | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.30 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Set the clock C state, or bypass clock, to enabled or disabled. | |||||||||||||
| CsetPtPtpModActive | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.31 | YesValue | RW | ||||||||||
column · YesValue · read-write · current Set the specified module in the redundant pair to be Active. Note1: This command only applies when the module in the redundant pair. Note2: This field only has meaning for a writing (1). Note3: Don't apply COMMIT after this command. | |||||||||||||
| CsetPtPtpEthRate | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.32 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the PTP port transmission rate. all - means auto negotiation capable of both 100M and 1000Mbits/s rate. r100 - means auto negotiation capable of only 100Mbit/s rate. r1000 - means auto negotiation capable of only 1000Mbit/s rate Note: this setting is only applied to the copper SFP, not fiber. If fiber SFP installed, this setting is ignored.
| |||||||||||||
| CsetPtPtpVlan | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.33 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the VLAN state. 1 = Enabled 2 = Disabled Users must COMMIT for changes into effect. | |||||||||||||
| CsetPtPtpRmvClient | 1.3.6.1.4.1.601.3.1.1.3.23.1.1.34 | OCTET STRING (SIZE (8)) | RW | ||||||||||
column · OCTET STRING (SIZE (8)) · read-write · current This is an action command and not a configuration command. This command remove a client from a ptp client list. The clockid is a hexadecimal format. Note: this field only has meansing for write action with proper clock id. When it read, it always returns as all zero octet string. | |||||||||||||
| TsetPtpPortTable | 1.3.6.1.4.1.601.3.1.1.3.23.2 | NA | |||||||||||
table · not-accessible · current Set PackeTime PTP ethernet port information. | |||||||||||||
| RsetPtpPortEntry | 1.3.6.1.4.1.601.3.1.1.3.23.2.1 | NA | |||||||||||
row · not-accessible · current PackeTime PTP ethernet port state and settings information.
setPtPtpPortChassis
Identifies which chassis is being addressed.
setPtPtpPortSlot
Identifies which slot is being addressed.
setPtPtpPortNum
Identifies which port is being addressed.
setPtPtpPortAddr
Set the port IP address
setPtPtpPortMask
Set the port network mask
setPtPtpPortGate
Set the port gateway address | |||||||||||||
| CsetPtpPortChassis | 1.3.6.1.4.1.601.3.1.1.3.23.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis, slot, and port number uniquely identify each entry. | |||||||||||||
| CsetPtpPortSlot | 1.3.6.1.4.1.601.3.1.1.3.23.2.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis, slot, and port number uniquely identify each entry. | |||||||||||||
| CsetPtpPortNum | 1.3.6.1.4.1.601.3.1.1.3.23.2.1.3 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current Identifies which port is being addressed. This chassis, slot, and port number uniquely identify each entry. PTPTP ethernet interface number. 1 = Service Port A 2 = Maintenance Port | |||||||||||||
| CsetPtpPortAddr | 1.3.6.1.4.1.601.3.1.1.3.23.2.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the port IP address | |||||||||||||
| CsetPtpPortMask | 1.3.6.1.4.1.601.3.1.1.3.23.2.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the port network mask | |||||||||||||
| CsetPtpPortGate | 1.3.6.1.4.1.601.3.1.1.3.23.2.1.6 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the port gateway address | |||||||||||||
| TsetPtpVlanTable | 1.3.6.1.4.1.601.3.1.1.3.23.3 | NA | |||||||||||
table · not-accessible · current List of PackeTime PTP vlan attributes. The Virtural Local Area Network is implemented per IEEE 802.1Q. | |||||||||||||
| RsetPtpVlanEntry | 1.3.6.1.4.1.601.3.1.1.3.23.3.1 | NA | |||||||||||
row · not-accessible · current A PackeTime PTP vlan attributes and settings:
setPtPtpVlanChassis
Identifies which chassis is being addressed.
setPtPtpVlanSlot
Identifies which slot is being addressed.
setPtpVlanIndex
Set the VLAN index number for PTPTP.
setPtpVlanState
Enable or Disable of a given VLAN Entry
setPtpVlanAddr
VLAN IP Address (If 0.0.0.0, and then SET, this will delete this entry)
note: This field has to set first with a valid non-zero IP address, if you want to add a new entry
setPtpVlanMask
VLAN Network Mask
setPtpVlanGate
VLAN Gateway
setPtpVlanId
VLAN ID
setPtpVlanPriority
VLAN Priority
Note: The module setPtPtpVlan set must be enabled, and each of the enabled entires
has meaning. | |||||||||||||
| CsetPtpVlanChassis | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis and slot number uniquely identify each entry. | |||||||||||||
| CsetPtpVlanSlot | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis and slot number uniquely identify each entry. | |||||||||||||
| CsetPtpVlanIndex | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.3 | INTEGER (1..4) | NA | ||||||||||
column · INTEGER (1..4) · not-accessible · current Set the VLAN index number for PTP. | |||||||||||||
| CsetPtpVlanState | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Enable or Disable of a given VLAN entry Note: The value has meaning, only when the VLAN is enabled | |||||||||||||
| CsetPtpVlanAddr | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Ethernet VLAN Port IP Address Note: you must have IP address in order to add or change other fields. This field has to set first with a valid non-zero IP address, if you want to add a new entry If the IP is 0.0.0.0, and use the SET operation, this mean delete this entry. | |||||||||||||
| CsetPtpVlanMask | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.6 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Ethernet VLAN Port Network Mask | |||||||||||||
| CsetPtpVlanGate | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.7 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Ethernet VLAN Port Gateway Address | |||||||||||||
| CsetPtpVlanId | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.8 | INTEGER (2..4094) | RW | ||||||||||
column · INTEGER (2..4094) · read-write · current Set the VLAN ID (2..4094) for Service Port A Note: The value has meaning, only when the VLAN is enabled | |||||||||||||
| CsetPtpVlanPriority | 1.3.6.1.4.1.601.3.1.1.3.23.3.1.9 | INTEGER (0..7) | RW | ||||||||||
column · INTEGER (0..7) · read-write · current VLAN Priority (0..7) for Service Port A Note: The value has meaning, only when the VLAN is enabled | |||||||||||||
| NsetupSynce | 1.3.6.1.4.1.601.3.1.1.3.24 | ||||||||||||
| TsetSynceTable | 1.3.6.1.4.1.601.3.1.1.3.24.1 | NA | |||||||||||
table · not-accessible · current A list of SyncE settings. | |||||||||||||
| RsetSynceEntry | 1.3.6.1.4.1.601.3.1.1.3.24.1.1 | NA | |||||||||||
row · not-accessible · current The enties of the SyncE settings and attributes.
| |||||||||||||
| CsetSynceChassis | 1.3.6.1.4.1.601.3.1.1.3.24.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each entry. | |||||||||||||
| CsetSynceSlot | 1.3.6.1.4.1.601.3.1.1.3.24.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each entry. | |||||||||||||
| CsetSyncePortDirection | 1.3.6.1.4.1.601.3.1.1.3.24.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set SyncE Port Direction to be either Output or Input. The output port is a SyncE master port, and input port is a SyncE slave port.
| |||||||||||||
| CsetSynceEsmc | 1.3.6.1.4.1.601.3.1.1.3.24.1.1.4 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the Ethernet Synchronization Message Channel (ESMC) state is either Enable or Disable. If ESMC is enabled, the ESMC is used; otherwise, it shall not be used. | |||||||||||||
| CsetSynceQl | 1.3.6.1.4.1.601.3.1.1.3.24.1.1.5 | EnaValue | RW | ||||||||||
column · EnaValue · read-write · current Set the Quality Level (QL, i.e. SSM) in the ESMC is either Enabled or Disabled. If QL is enabled, the SSM in the ESMC is used; otherwise, it shall not be used. | |||||||||||||
| CsetSynceOutQl | 1.3.6.1.4.1.601.3.1.1.3.24.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the Output QL mode is either unidirectional or bidirectional. In the unidirectional mode, the rx ESMC from the downstream NE is ignored. The tx SSM will be determined by the system clock state only. In the bidirectional mode, the rx ESMC from the downstream NE is not ignored but is used for testing purposes and some interoperability cases.
| |||||||||||||
| Ngeneral | 1.3.6.1.4.1.601.3.1.1.4 | ||||||||||||
| TinfoTable | 1.3.6.1.4.1.601.3.1.1.4.1 | NA | |||||||||||
table · not-accessible · current A list of general information entries. | |||||||||||||
| RgiEntry | 1.3.6.1.4.1.601.3.1.1.4.1.1 | NA | |||||||||||
| CgiChassis | 1.3.6.1.4.1.601.3.1.1.4.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CgiSlot | 1.3.6.1.4.1.601.3.1.1.4.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. | |||||||||||||
| CgiSystime | 1.3.6.1.4.1.601.3.1.1.4.1.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports length of time (in seconds) a specified module has been operational since last reboot. Only apply to the CPU-based module. zero means Not Applicable. | |||||||||||||
| CgiElevation | 1.3.6.1.4.1.601.3.1.1.4.1.1.4 | INTEGER (0 | 60..500000) | RW | ||||||||||
column · INTEGER (0 | 60..500000) · read-write · current The module alarm elevation time (in seconds). Each module in the system can be set for elevation time from 60 seconds to 500,000 seconds. A setting of 0 (zero) means no elevation for the alarm. For example, when an alarm has been at MINOR level ontinuously for elevtime seconds, then it is elevated to the next level (MAJOR). Note: 0 = disabled. | |||||||||||||
| CgiSetup | 1.3.6.1.4.1.601.3.1.1.4.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Saves or restores the configuration of the specified module. FACTORY - restores the module configuration to factory defaults. SAVE - will save the current configuration as User. USER - will restore the saved User configuration. Note: This field only has meaning for a write operation. Only apply to the CPU-based module.
| |||||||||||||
| CgiRestart | 1.3.6.1.4.1.601.3.1.1.4.1.1.6 | YesValue | RW | ||||||||||
column · YesValue · read-write · current Restarts a module. Writing a '1' to this variable restarts (reboots) the module. Note: This field only has meaning for a write operation. Only apply to the CPU-based module. | |||||||||||||
| Nevent | 1.3.6.1.4.1.601.3.1.1.5 | ||||||||||||
| SevCount | 1.3.6.1.4.1.601.3.1.1.5.1 | INTEGER (1..1000) | RW | ||||||||||
scalar · INTEGER (1..1000) · read-write · current Reports total number of events to display. The number represents total number of events we want to display. Its value ranges between 1 and 1000. | |||||||||||||
| SevType | 1.3.6.1.4.1.601.3.1.1.5.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reports which event type we want to display (functions as a display filter). Set these values to the desired type you want to display: ALARM - for alarm type REPORT - for event type ALL - for all (alarm and event) type.
| |||||||||||||
| TeventTable | 1.3.6.1.4.1.601.3.1.1.5.3 | NA | |||||||||||
table · not-accessible · current Report of system event entries. The number of entries is given by the value of evNumber. The total entries are up to 1000. | |||||||||||||
| RevEntry | 1.3.6.1.4.1.601.3.1.1.5.3.1 | NA | |||||||||||
| CevIndex | 1.3.6.1.4.1.601.3.1.1.5.3.1.1 | INTEGER (1..1000) | NA | ||||||||||
column · INTEGER (1..1000) · not-accessible · current A unique value for each event. This value range from 1 to 1000. | |||||||||||||
| CevT | 1.3.6.1.4.1.601.3.1.1.5.3.1.2 | OCTET STRING (SIZE (36..116)) | RO | ||||||||||
column · OCTET STRING (SIZE (36..116)) · read-only · current A OCTET STRING containing information about the event.
The string is in the TLV format, and contains
following information:
INTEGER - event id
INTEGER - module hex code
DateAndTime - timestamp
INTEGER - chassis number
INTEGER - slot number
INTEGER - port number
INTEGER - alarm code
INTEGER - notification code
INTEGER - Elevated
DisplayString - ascii string description of the event
event id:
INTEGER (0..255)
Alarm Code:
minor(1),
major(2),
critical(3),
ignore(4),
report(5),
Notification Code:
minor(1),
major(2),
critical(3),
ignore(4),
report(5),
clear(6)
Elevated:
Yes(1),
No(2) | |||||||||||||
| Nalarm | 1.3.6.1.4.1.601.3.1.1.6 | ||||||||||||
| TalarmTable | 1.3.6.1.4.1.601.3.1.1.6.1 | NA | |||||||||||
table · not-accessible · current A list of alarm entries. | |||||||||||||
| RalmEntry | 1.3.6.1.4.1.601.3.1.1.6.1.1 | NA | |||||||||||
| CalmChassis | 1.3.6.1.4.1.601.3.1.1.6.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CalmSlot | 1.3.6.1.4.1.601.3.1.1.6.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CalmPort | 1.3.6.1.4.1.601.3.1.1.6.1.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CalmIndex | 1.3.6.1.4.1.601.3.1.1.6.1.1.4 | INTEGER (1..32) | NA | ||||||||||
column · INTEGER (1..32) · not-accessible · current Reports the alarm index value. Note: The alarm id is allowed for number zero; therefore, the OID for this index is alarm id plus 1 to avoid the zero number for OID. | |||||||||||||
| CalmId | 1.3.6.1.4.1.601.3.1.1.6.1.1.5 | INTEGER (0..31) | RO | ||||||||||
column · INTEGER (0..31) · read-only · current Reports the alarm id. Note: This is the actual alarm id range 0 thru 31. | |||||||||||||
| CalmName | 1.3.6.1.4.1.601.3.1.1.6.1.1.6 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports the text string to describe this alarm. | |||||||||||||
| CalmLevel | 1.3.6.1.4.1.601.3.1.1.6.1.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports current state of alarm indications on the units. minor(1), major(2), critical(3), ignore(4), report(5), clear(6)
| |||||||||||||
| CalmElevate | 1.3.6.1.4.1.601.3.1.1.6.1.1.8 | YesValue | RO | ||||||||||
column · YesValue · read-only · current Report alarm elevation state 1 = alarm elevated 2 = alarm not elevated | |||||||||||||
| CalmStatus | 1.3.6.1.4.1.601.3.1.1.6.1.1.9 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports the text string to describe this alarm status condition. | |||||||||||||
| SsetAlmLoc | 1.3.6.1.4.1.601.3.1.1.6.2 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Set the module slot location. It should be one module, multiple module is not allowed where x is the chassis number: the range is 1 to 5, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number. range is [1 to 20]. For example: 1A3-1 for module located in chassis 1 and slot 3, port 1. Note: The slot location must be physically installed in the unit. | |||||||||||||
| TsetAlmTable | 1.3.6.1.4.1.601.3.1.1.6.3 | NA | |||||||||||
table · not-accessible · current A list of alarm entries. | |||||||||||||
| RsalEntry | 1.3.6.1.4.1.601.3.1.1.6.3.1 | NA | |||||||||||
| CsalChassis | 1.3.6.1.4.1.601.3.1.1.6.3.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CsalSlot | 1.3.6.1.4.1.601.3.1.1.6.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CsalPort | 1.3.6.1.4.1.601.3.1.1.6.3.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CsalIndex | 1.3.6.1.4.1.601.3.1.1.6.3.1.4 | INTEGER (1..32) | NA | ||||||||||
column · INTEGER (1..32) · not-accessible · current Index value for the alarm. Note: The alarm id is allowed for number zero; therefore, the OID for this index is alarm id plus 1 to avoid the zero number for OID. | |||||||||||||
| CsalId | 1.3.6.1.4.1.601.3.1.1.6.3.1.5 | INTEGER (0..31) | RO | ||||||||||
column · INTEGER (0..31) · read-only · current ID value for the alarm. Note: This is the actual alarm id range 0 thru 31. | |||||||||||||
| CsalName | 1.3.6.1.4.1.601.3.1.1.6.3.1.6 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Name/Description for the alarm. | |||||||||||||
| CsalSet | 1.3.6.1.4.1.601.3.1.1.6.3.1.7 | YesValue | RO | ||||||||||
column · YesValue · read-only · current Alarm state for the alarm: 1 = alarm set 2 = no alarm | |||||||||||||
| CsalElevate | 1.3.6.1.4.1.601.3.1.1.6.3.1.8 | YesValue | RO | ||||||||||
column · YesValue · read-only · current Alarm elevation status: 1 = alarm elevated 2 = alarm not elevated | |||||||||||||
| CsalLevel | 1.3.6.1.4.1.601.3.1.1.6.3.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Sets alarm severe level are: MINOR - sets alarm level to MINOR MAJOR - set alarm level to MAJOR CRITICAL - sets alarm level to CRITICAL IGNORE - ignore any alarm indication REPORT - report only any alarm indication
| |||||||||||||
| CsalDelay | 1.3.6.1.4.1.601.3.1.1.6.3.1.10 | INTEGER (-1 | 0..86400) | RW | ||||||||||
column · INTEGER (-1 | 0..86400) · read-write · current Sets the length of time in seconds an alarm must be active before generating an alarm. Note: 0 = user selected immediate indication -1 (when read) = forced immediate indication (i.e. not user selectable) | |||||||||||||
| Nref | 1.3.6.1.4.1.601.3.1.1.7 | ||||||||||||
| SrefClk | 1.3.6.1.4.1.601.3.1.1.7.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Report/Set which clk is currently selected. clka(1), clkb(2), none(3) Note: When read, it shows which clock is currently selected. When write, only clka or clkb are valid.
| |||||||||||||
| SrefInp | 1.3.6.1.4.1.601.3.1.1.7.2 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Report/Set the input reference port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) - is the constant letter '-', and is slot/port sepearator z is the port number (1 to 3). For example: 1A3-1 means this input port located at chassis 1, slot 3, and port 1. The NULL string means there is no input reference. | |||||||||||||
| SrefBypass | 1.3.6.1.4.1.601.3.1.1.7.3 | DisplayString (SIZE (0..10)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-only · current Report/Set input port designated as the input bypass clock. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) - is the constant letter '-', and is slot/port sepearator z is the port number (1 to 3). For example: 1A3-1 means this input port located at chassis 1, slot 3, and port 1. The NULL string means there is no bypass clock. Note: In the SSU2000, the input module always resides in the main chassis (i.e. 'x' is one). | |||||||||||||
| SrefClkSwitch | 1.3.6.1.4.1.601.3.1.1.7.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Report/Set Clock auto-return (AR) mode. ar(1), off(2) The AR option changes the current clock selection mode to revertive operation.
| |||||||||||||
| SrefInpSwitch | 1.3.6.1.4.1.601.3.1.1.7.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Report/Set input switch mode. The InpSwitch settings are: AR = Auto Return (revertive) AS = Auto Switch (but not revertive) OFF = No auto switching
| |||||||||||||
| SrefInpSelection | 1.3.6.1.4.1.601.3.1.1.7.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Report/Set input selection mode.
The input reference selection can be PRIORITY/ PQL.
PRIORITY - the user assigned priority number is used to
pick the best input port as an input reference.
PQL - the input Priority Quality Level (PQL) is used to
select which is the best input port reference.
| |||||||||||||
| SrefClkTodsrc | 1.3.6.1.4.1.601.3.1.1.7.7 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Report/Set TOD Source. The value can be any TOD source candidate (GPS or PackeTime) indicates the TODSRC of the selected clock. The text string of the todsrc reference port. The format is defined as xAy. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) For example: 1A3 means this reference located at chassis 1, slot 3. The NULL string means there is no reference. | |||||||||||||
| Nphase | 1.3.6.1.4.1.601.3.1.1.8 | ||||||||||||
| TphaseTable | 1.3.6.1.4.1.601.3.1.1.8.1 | NA | |||||||||||
table · not-accessible · current A list of phase data entries. | |||||||||||||
| RphEntry | 1.3.6.1.4.1.601.3.1.1.8.1.1 | NA | |||||||||||
| CphChassis | 1.3.6.1.4.1.601.3.1.1.8.1.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CphSlot | 1.3.6.1.4.1.601.3.1.1.8.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CphPort | 1.3.6.1.4.1.601.3.1.1.8.1.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CphA | 1.3.6.1.4.1.601.3.1.1.8.1.1.4 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 1-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| CphB | 1.3.6.1.4.1.601.3.1.1.8.1.1.5 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 1-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| Cph100A | 1.3.6.1.4.1.601.3.1.1.8.1.1.6 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 100-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| Cph100B | 1.3.6.1.4.1.601.3.1.1.8.1.1.7 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 100-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| Cph1000A | 1.3.6.1.4.1.601.3.1.1.8.1.1.8 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 1000-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| Cph1000B | 1.3.6.1.4.1.601.3.1.1.8.1.1.9 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 1000-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| Cph10000A | 1.3.6.1.4.1.601.3.1.1.8.1.1.10 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 10000-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| Cph10000B | 1.3.6.1.4.1.601.3.1.1.8.1.1.11 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current 10000-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains following information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| SphHisInpLoc | 1.3.6.1.4.1.601.3.1.1.8.2 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Select input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) - is the constant letter '-', and is slot/port sepearator z is the port number (1 to 3). For example: 1A3-1 means this input port located at chassis 1, slot 3, and port 1 Note: the user must specify valid input port address. The valid port must be physically installed in the system. Note: In the SSU2000, the input is located at main chassis, the 'x' number is always one. | |||||||||||||
| SphHisTimeAvg | 1.3.6.1.4.1.601.3.1.1.8.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reports time (seconds) interval of phase value. t1 (4000 second time interval), t100 (1000 second time interval), t1000 (1000 second time interval), t10000 (10000 second time interval) Note: T1 data is only available for ports configured for this function, maximum of 5 ports.
| |||||||||||||
| SphHisClk | 1.3.6.1.4.1.601.3.1.1.8.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reports which clock is used as the reference in the phase measurement.
| |||||||||||||
| SphHisCnt | 1.3.6.1.4.1.601.3.1.1.8.5 | INTEGER (1..7000) | RW | ||||||||||
scalar · INTEGER (1..7000) · read-write · current Count of phase measurement history requested from the phase history buffer. The maximum phase history in buffer are: T100 = 7000, T1000 = 700, T10000 = 70, Default value = 10. | |||||||||||||
| TphHisTable | 1.3.6.1.4.1.601.3.1.1.8.6 | NA | |||||||||||
table · not-accessible · current A list of phase history entries. The number of entries is given by the value of phHisCnt. The total entries are up to 7000. Note: this table is based upon the following values: phHisInpLoc - the location of the input port phHisTimeAvg - the time (seconds) interval of phase value phHisCnt - total amount of phase history to return. | |||||||||||||
| RphHisEntry | 1.3.6.1.4.1.601.3.1.1.8.6.1 | NA | |||||||||||
row · not-accessible · current A phase entry attributes:
phHisChassis
Identifies which chassis is being addressed.
phHisSlot
Identifies which slot is being addressed.
phHisPort
Identifies which port is being addressed.
phHisIndex
Count/ID value for each phase.
phHisV
Phase value in nanoseconds defined in phHisTimeAvg.
| |||||||||||||
| CphHisChassis | 1.3.6.1.4.1.601.3.1.1.8.6.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CphHisSlot | 1.3.6.1.4.1.601.3.1.1.8.6.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CphHisPort | 1.3.6.1.4.1.601.3.1.1.8.6.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CphHisIndex | 1.3.6.1.4.1.601.3.1.1.8.6.1.4 | INTEGER (1..7000) | NA | ||||||||||
column · INTEGER (1..7000) · not-accessible · current Count/ID value for each phase. Valid range : 1 - 7000. | |||||||||||||
| CphHisV | 1.3.6.1.4.1.601.3.1.1.8.6.1.5 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Phase value in nanoseconds defined in phHisTimeAvg. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and containsfollowing information: DateAndTime - timestamp INTEGER - phase value | |||||||||||||
| Nfreq | 1.3.6.1.4.1.601.3.1.1.9 | ||||||||||||
| TfreqTable | 1.3.6.1.4.1.601.3.1.1.9.1 | NA | |||||||||||
table · not-accessible · current A list of frequency entries for each input port. | |||||||||||||
| RfqEntry | 1.3.6.1.4.1.601.3.1.1.9.1.1 | NA | |||||||||||
| CfqChassis | 1.3.6.1.4.1.601.3.1.1.9.1.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CfqSlot | 1.3.6.1.4.1.601.3.1.1.9.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CfqPort | 1.3.6.1.4.1.601.3.1.1.9.1.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CfqA | 1.3.6.1.4.1.601.3.1.1.9.1.1.4 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current frequency measurement versus clock A. The 1,999,999,999 is designated for invalid frequency value. DateAndTime - timestamp INTEGER - frequency value | |||||||||||||
| CfqB | 1.3.6.1.4.1.601.3.1.1.9.1.1.5 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Current frequency measurement versus clock B. The 1,999,999,999 is designated for invalid frequency value. DateAndTime - timestamp INTEGER - frequency value | |||||||||||||
| Nntp | 1.3.6.1.4.1.601.3.1.1.10 | ||||||||||||
| SntpMode | 1.3.6.1.4.1.601.3.1.1.10.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Current NTP mode in the system.
SERVER - The system has a GPS module installed and has UTC time.
CLIENT - The system has a valid Client peer entry in the NTP Table,
and is synced with its associated Server.
LOCAL - The sytem is running its own clock and has its own time.
| |||||||||||||
| SntpSysPeer | 1.3.6.1.4.1.601.3.1.1.10.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current This is the system peer IP address. | |||||||||||||
| SntpSysPeerOffset | 1.3.6.1.4.1.601.3.1.1.10.3 | DisplayString (SIZE (0..32)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current This is the system peer offset. | |||||||||||||
| TpeerStaTable | 1.3.6.1.4.1.601.3.1.1.10.4 | NA | |||||||||||
table · not-accessible · current This is the peer statistics table. | |||||||||||||
| RpeerStaEntry | 1.3.6.1.4.1.601.3.1.1.10.4.1 | NA | |||||||||||
row · not-accessible · current A peer statistics attributes:
peerStaIndex
Reports index for each peer statistics table.
peerStaAddress
Reports the peer IP address.
peerStaHomeMode
Reports the peer NTP mode.
peerStaParentMode
Reports the parent NTP mode.
peerStaLeap
Reports leap indicator state.
peerStaStratum
Reports peer stratum level.
peerStaPrecision
Reports peer precision.
peerStaDelay
Reports peer delay.
peerStaDispersion
Reports peer dispersion.
peerStaOffset
Reports peer offset.
peerStaSentCnt
Reports peer sent counter.
peerStaProcessCnt
Reports peer process counter.
peerStaSanity
Reports status of peer sanity.
| |||||||||||||
| CpeerStaIndex | 1.3.6.1.4.1.601.3.1.1.10.4.1.1 | INTEGER (1..8) | NA | ||||||||||
column · INTEGER (1..8) · not-accessible · current Reports index for each peer statistics table. This value ranges from 1 to 8. | |||||||||||||
| CpeerStaAddress | 1.3.6.1.4.1.601.3.1.1.10.4.1.2 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Reports the peer IP address. | |||||||||||||
| CpeerStaHomeMode | 1.3.6.1.4.1.601.3.1.1.10.4.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the peer NTP mode. unspect(0), active(1), passive(2), client(3), server(4), broadcast(5), control(6), private(7), bclient(8)
| |||||||||||||
| CpeerStaParentMode | 1.3.6.1.4.1.601.3.1.1.10.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports the peer parent NTP mode. unspect(0), active(1), passive(2), client(3), server(4), broadcast(5), control(6), private(7), bclient(8)
| |||||||||||||
| CpeerStaLeap | 1.3.6.1.4.1.601.3.1.1.10.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Reports leap indicator state. Valid values are: 0 = sync'd, no warning 1 = 1 second will be added 2 = 1 second will be subtracted 3 = not sync'd
| |||||||||||||
| CpeerStaStratum | 1.3.6.1.4.1.601.3.1.1.10.4.1.6 | INTEGER (0 | 1..16) | RO | ||||||||||
column · INTEGER (0 | 1..16) · read-only · current Reports peer stratum level. If zero, it is invalid. | |||||||||||||
| CpeerStaPrecision | 1.3.6.1.4.1.601.3.1.1.10.4.1.7 | INTEGER (-1000..1000) | RO | ||||||||||
column · INTEGER (-1000..1000) · read-only · current Reports peer precision. | |||||||||||||
| CpeerStaDelay | 1.3.6.1.4.1.601.3.1.1.10.4.1.8 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports peer delay. | |||||||||||||
| CpeerStaDispersion | 1.3.6.1.4.1.601.3.1.1.10.4.1.9 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports peer dispersion. | |||||||||||||
| CpeerStaOffset | 1.3.6.1.4.1.601.3.1.1.10.4.1.10 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Reports peer offset. | |||||||||||||
| CpeerStaSentCnt | 1.3.6.1.4.1.601.3.1.1.10.4.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports peer sent counter. | |||||||||||||
| CpeerStaProcessCnt | 1.3.6.1.4.1.601.3.1.1.10.4.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Reports peer process counter. | |||||||||||||
| CpeerStaSanity | 1.3.6.1.4.1.601.3.1.1.10.4.1.13 | YesValue | RO | ||||||||||
column · YesValue · read-only · current Reports status of peer sanity: 1 = passed 2 = rejected | |||||||||||||
| TntpTable | 1.3.6.1.4.1.601.3.1.1.10.5 | NA | |||||||||||
table · not-accessible · current This table provides the NTP peer statistics. | |||||||||||||
| RntpEntry | 1.3.6.1.4.1.601.3.1.1.10.5.1 | NA | |||||||||||
row · not-accessible · current NTP peer attributes. ntpIndex Index for each NTP peer entry. ntpPeer Reports NTP peer IP address. ntpPeerType Report NTP peer mode. ntpBrdTimer Report NTP broadcast timer
| |||||||||||||
| CntpIndex | 1.3.6.1.4.1.601.3.1.1.10.5.1.1 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Index for each NTP peer entry. This value ranges from 1 to 3. | |||||||||||||
| CntpPeer | 1.3.6.1.4.1.601.3.1.1.10.5.1.2 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Reports NTP peer IP address. If the ip address is zero for this entry, the whole entry has no meaning. | |||||||||||||
| CntpPeerType | 1.3.6.1.4.1.601.3.1.1.10.5.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Report NTP peer mode. CLIENT - The IP for NTP server in client mode. BROADCAST - The subnet mask for broadcasting mode. BCLIENT - The IP for NTP server in broadcast client mode.
| |||||||||||||
| CntpBrdTimer | 1.3.6.1.4.1.601.3.1.1.10.5.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Report NTP broadcast timer in notuse(0), t32 (32), t64 (64), t128 (128), t256 (256), t512 (512), t1024 (1024)
| |||||||||||||
| SntpAddClient | 1.3.6.1.4.1.601.3.1.1.10.6 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Set NTP peers to enable client mode. This field has meaning only during 'write' operations. | |||||||||||||
| SntpAddBrd | 1.3.6.1.4.1.601.3.1.1.10.7 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Set NTP servers to enable broadcast mode. This field has meaning only during 'write' operations. | |||||||||||||
| SntpAddBclient | 1.3.6.1.4.1.601.3.1.1.10.8 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Set NTP peers to enable broadcast client mode. This field has meaning only during 'write' operations. | |||||||||||||
| SntpDelPeer | 1.3.6.1.4.1.601.3.1.1.10.9 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Delete NTP servers from the peer table. This field has meaning only during 'write' operations. | |||||||||||||
| SntpClr | 1.3.6.1.4.1.601.3.1.1.10.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clear all the NTP peer addresses in the unit. This field has meaning only during 'write' operations.
| |||||||||||||
| SntpBTimer | 1.3.6.1.4.1.601.3.1.1.10.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reports/Set the broadcast timer t32 (32), t64 (64), t128 (128), t256 (256), t512 (512), t1024 (1024)
| |||||||||||||
| SntpPrefer | 1.3.6.1.4.1.601.3.1.1.10.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Report/Set the SSU time-of-day source from GPS or NTP Client.
| |||||||||||||
| Ntime | 1.3.6.1.4.1.601.3.1.1.11 | ||||||||||||
| StmCurTime | 1.3.6.1.4.1.601.3.1.1.11.1 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current Reports the current system time. Note: user can change the system time only when the system is in LOCAL mode. If the system is SERVER or NTP CLIENT, changing system time is not allowed. | |||||||||||||
| StmLocalOffset | 1.3.6.1.4.1.601.3.1.1.11.2 | TLocalTimeOffset | RW | ||||||||||
scalar · TLocalTimeOffset · read-write · current Report/Set local time offset. Note: This allow the users to set a local time offset. The local time offset limits are (+/-)13 hours. This is primarily used in systems with GPS or NTP time-of-day references. where users' prefer system time to be set to local time. | |||||||||||||
| NpqlTable | 1.3.6.1.4.1.601.3.1.1.12 | ||||||||||||
| TpqlDs1Table | 1.3.6.1.4.1.601.3.1.1.12.1 | NA | |||||||||||
table · not-accessible · current A list of PQL entries. The total entries are 16. | |||||||||||||
| RpqlDs1Entry | 1.3.6.1.4.1.601.3.1.1.12.1.1 | NA | |||||||||||
| CpqlDs1Index | 1.3.6.1.4.1.601.3.1.1.12.1.1.1 | INTEGER (1..16) | NA | ||||||||||
column · INTEGER (1..16) · not-accessible · current A unique value for each PQL table. This value ranges from 1 to 16. | |||||||||||||
| CpqlDs1Ssm | 1.3.6.1.4.1.601.3.1.1.12.1.1.2 | TSsm | RW | ||||||||||
column · TSsm · read-write · current This DS1 Sync Status Message (SSM) value for that Priority Quality Level (PQL) entry. Note: If value of this entry is 0xff, the entry is not used. This is the 8-bit value. If the 8th bit is set, this SSM value is not telcom standard. Use caution when modifying as system characteristics will be altered. | |||||||||||||
| CpqlDs1Descr | 1.3.6.1.4.1.601.3.1.1.12.1.1.3 | DisplayString (SIZE (0..14)) | RW | ||||||||||
column · DisplayString (SIZE (0..14)) · read-write · current Report description for the DS1 Priority Quality Level (PQL) entry. | |||||||||||||
| TpqlE1Table | 1.3.6.1.4.1.601.3.1.1.12.2 | NA | |||||||||||
table · not-accessible · current A list of PQL entries. The total entries are 16. | |||||||||||||
| RpqlE1Entry | 1.3.6.1.4.1.601.3.1.1.12.2.1 | NA | |||||||||||
row · not-accessible · current A PQL entry attributes. pqlE1Index Index value for each PQL table. pqlE1Ssm Report/Set the E1 Sync Status Message (SSM) value for that Priority Quality Level (PQL) entry. pqlE1Descr Report/Set description for the E1 Priority Quality Level (PQL) entry.
| |||||||||||||
| CpqlE1Index | 1.3.6.1.4.1.601.3.1.1.12.2.1.1 | INTEGER (1..16) | NA | ||||||||||
column · INTEGER (1..16) · not-accessible · current Index value for each PQL table. This value ranges from 1 to 16. | |||||||||||||
| CpqlE1Ssm | 1.3.6.1.4.1.601.3.1.1.12.2.1.2 | TSsm | RW | ||||||||||
column · TSsm · read-write · current Report/Set the E1 Sync Status Message (SSM) value for that Priority Quality Level (PQL) entry. Note: If value of this entry is 0xff, this entry is not used. This is the 8-bits value. If the 8th bit is set, this SSM value is not telcom standard. Use caution when modifying as system characteristics will be altered. | |||||||||||||
| CpqlE1Descr | 1.3.6.1.4.1.601.3.1.1.12.2.1.3 | DisplayString (SIZE (0..14)) | RW | ||||||||||
column · DisplayString (SIZE (0..14)) · read-write · current Report/Set description for the E1 Priority Quality Level (PQL) entry. | |||||||||||||
| SpqlReset | 1.3.6.1.4.1.601.3.1.1.12.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set DS1/E1 Priority Quality Level(PQL) tables into factory defaults. Note: It only has meaning for 'write' operations.
| |||||||||||||
| Nioname | 1.3.6.1.4.1.601.3.1.1.13 | ||||||||||||
| TionameTable | 1.3.6.1.4.1.601.3.1.1.13.1 | NA | |||||||||||
table · not-accessible · current A list of input/output name entries. | |||||||||||||
| RionEntry | 1.3.6.1.4.1.601.3.1.1.13.1.1 | NA | |||||||||||
row · not-accessible · current An io name entry attributes. ionChassis Identifies which chassis is being addressed. ionSlot Identifies which slot is being addressed. ionPort Identifies which port is being addressed. ionName Report/Set port ioname field.
| |||||||||||||
| CionChassis | 1.3.6.1.4.1.601.3.1.1.13.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CionSlot | 1.3.6.1.4.1.601.3.1.1.13.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CionPort | 1.3.6.1.4.1.601.3.1.1.13.1.1.3 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CionName | 1.3.6.1.4.1.601.3.1.1.13.1.1.4 | DisplayString (SIZE (0..20)) | RW | ||||||||||
column · DisplayString (SIZE (0..20)) · read-write · current Report/Set port ioname field. If the name is a null string (zero length), this i/o name s cleared from the port. | |||||||||||||
| SionameLoc | 1.3.6.1.4.1.601.3.1.1.13.2 | DisplayString (SIZE (3..20)) | RW | ||||||||||
scalar · DisplayString (SIZE (3..20)) · read-write · current The text string of the input/output port.
The format is defined as xAy-z or xAy-z&&z (if specified the range of ports)
where
x is the chassis number: in this case is 1,
A is the constant letter 'A', and is chassis/slot sepearator.
y is the slot number: (range is 3 to 11)
- is the constant letter '-', and is slot/port sepearator
z is the port number (1 to 3, if input) or
(1 to 20, if output port).
&& is the two constant letters '&&', and is port range sepearator
z is the ending port number (1 to 3, if input) or
(1 to 20, if output port).
For example:
1A3-1 means this port located at chassis 1, slot 3, and port 1.
2A5-2&&5 means this ports located at chassis 2, slot 5, and ports 2 thru 5.
Note: the user must specify valid port address.
The valid port must be physically installed in the system. | |||||||||||||
| SionameSet | 1.3.6.1.4.1.601.3.1.1.13.3 | DisplayString (SIZE (0..20)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..20)) · read-write · current Report/Set name associated input/output ports. If the name is a null string, this i/o name is cleared from the ports. Note: You must specify the i/o port range first, and then provide the i/o name. | |||||||||||||
| Ncomm | 1.3.6.1.4.1.601.3.1.1.14 | ||||||||||||
| Tcom232Table | 1.3.6.1.4.1.601.3.1.1.14.1 | NA | |||||||||||
table · not-accessible · current A list of RS232 port entries. The total entries are 3. | |||||||||||||
| RcomEntry | 1.3.6.1.4.1.601.3.1.1.14.1.1 | NA | |||||||||||
row · not-accessible · current An RS232 communication entry attributes.
comIndex
Index for each communication table.
comMode
Set the specified RS232 port command parser to ICS or TL1.
comEcho
Enable/disable echo on the specified RS232 port.
comEol
Set the specified RS232 port End Of Line (EOL) terminator.
comBaud
Set the specified RS232 port baud rate.
| |||||||||||||
| CcomIndex | 1.3.6.1.4.1.601.3.1.1.14.1.1.1 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Index for each communication table. This value ranges from 1 to 3. | |||||||||||||
| CcomMode | 1.3.6.1.4.1.601.3.1.1.14.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the specified RS232 port command parser to ICS or TL1.
| |||||||||||||
| CcomEcho | 1.3.6.1.4.1.601.3.1.1.14.1.1.3 | OnValue | RW | ||||||||||
column · OnValue · read-write · current Enable/disable echo on the specified RS232 port. Note: This only affects the ICS command mode. | |||||||||||||
| CcomEol | 1.3.6.1.4.1.601.3.1.1.14.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the specified RS232 port End Of Line (EOL) terminator. cr (1), lf (2), crlf (3)
| |||||||||||||
| CcomBaud | 1.3.6.1.4.1.601.3.1.1.14.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the specified RS232 port baud rate.
Valid baud rates are:
baud1200 (1200),
baud2400 (2400),
baud4800 (4800),
baud9600 (9600),
baud19200 (19200)
| |||||||||||||
| TcomParmTable | 1.3.6.1.4.1.601.3.1.1.14.2 | NA | |||||||||||
table · not-accessible · current A list of communication port setting entries (such as timeout). The total entries are 5. | |||||||||||||
| RcomParmEntry | 1.3.6.1.4.1.601.3.1.1.14.2.1 | NA | |||||||||||
row · not-accessible · current Communication setting entry for each logical port.
comParmIndex
Index for each communication parameter table.
comType
Specify the communication port.
comTimeout
Report/Set communication port session timeout (in seconds).
| |||||||||||||
| CcomParmIndex | 1.3.6.1.4.1.601.3.1.1.14.2.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Index for each communication parameter table. This value ranges from 1 to 5. | |||||||||||||
| CcomType | 1.3.6.1.4.1.601.3.1.1.14.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Specify the communication port.
Valid values are:
1 = local (RS232)
2 = com A (RS232)
3 = com B (RS232)
4 = telnet
5 = telnet TL1 port
| |||||||||||||
| CcomTimeout | 1.3.6.1.4.1.601.3.1.1.14.2.1.3 | INTEGER (0 | 5..43200) | RW | ||||||||||
column · INTEGER (0 | 5..43200) · read-write · current Report/Set communication port session timeout (in seconds). Note: 0 = NEVER timeout. | |||||||||||||
| ScomLogoff | 1.3.6.1.4.1.601.3.1.1.14.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Logoff user on another logical communication port.
The valid communication port are:
local (1),
coma (2),
comb (3),
telneta (4),
telnetb (5),
telnetc (6),
telnetd (7),
etl1a (8),
etl1b (9),
etl1c (10),
etl1d (11)
Note: This field only has meaning for 'write' operations.
| |||||||||||||
| Nsnmpman | 1.3.6.1.4.1.601.3.1.1.15 | ||||||||||||
| Tsnmpv2manTable | 1.3.6.1.4.1.601.3.1.1.15.1 | NA | |||||||||||
table · not-accessible · current Reports the SNMPv2 manager(s) IP address. | |||||||||||||
| Rsnmpv2manEntry | 1.3.6.1.4.1.601.3.1.1.15.1.1 | NA | |||||||||||
row · not-accessible · current SNMPv2 manager table attributes.
snmpv2manIndex
Index for each SNMPv2 manager table entry.
snmpv2manIp
Set the snmpv2 manager IP address.
| |||||||||||||
| Csnmpv2manIndex | 1.3.6.1.4.1.601.3.1.1.15.1.1.1 | INTEGER (1..4) | NA | ||||||||||
column · INTEGER (1..4) · not-accessible · current Index for each SNMPv2 manager table entry. This value range from 1 to 4. | |||||||||||||
| Csnmpv2manIp | 1.3.6.1.4.1.601.3.1.1.15.1.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the snmpv2 manager IP address. Write a new IP address will put this new IP into table. Write zero IP address will delete this IP address from table. Note: The above only apply to SNMPv2. | |||||||||||||
| SsnmpmanInit | 1.3.6.1.4.1.601.3.1.1.15.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Initializes the SNMP Manager Table to null IP addresses. Note: This field only has meaning when 'write' operations
| |||||||||||||
| SsnmpmanTrap | 1.3.6.1.4.1.601.3.1.1.15.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the SNMP trap filter to SNMP Manager. The trap filter can be set to be 'alarm' only or all traps. 1 = alarm 2 = all If 'alarm' trap, only events with ID less than 32 (i.e. alarms) will be sent to the SNMP Manager. All other traps will be filtered out. The purpose of this command is to reduce the traffic, if desired.
| |||||||||||||
| SsnmpNotification | 1.3.6.1.4.1.601.3.1.1.15.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set SNMPv3 traps format to use.
v2 (1), -- traps in v2 form, address from v2 manager table
v3 (2), -- traps in v3 form, address from v2 manager table
all(3) -- traps in v2/v3, address from v2/v3 table accordingly
It can V2, V3, or both forms. Each v2/v3 traps sent out are viaits own manager table accordingly.
Note: The above only apply to SNMPv3 load.
| |||||||||||||
| SsnmpEnable | 1.3.6.1.4.1.601.3.1.1.15.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Activate/deactivate SNMPv2. Note: The above only apply to SNMPv3 load.
| |||||||||||||
| Tsnmpv2userTable | 1.3.6.1.4.1.601.3.1.1.15.6 | NA | |||||||||||
table · not-accessible · current SNMPv2 User Table. | |||||||||||||
| Rsnmpv2userEntry | 1.3.6.1.4.1.601.3.1.1.15.6.1 | NA | |||||||||||
row · not-accessible · current SNMPv2 user table entry attributes. snmpv2userIndex Index for each SNMPv2 user table entry. snmpv2user Reports SNMPv2 user
| |||||||||||||
| Csnmpv2userIndex | 1.3.6.1.4.1.601.3.1.1.15.6.1.1 | INTEGER (1..6) | NA | ||||||||||
column · INTEGER (1..6) · not-accessible · current Index for each SNMPv2 user entry. | |||||||||||||
| Csnmpv2user | 1.3.6.1.4.1.601.3.1.1.15.6.1.2 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports SNMPv2 user entry It is the read community string of an SNMPv2 user | |||||||||||||
| Tsnmpv3userTable | 1.3.6.1.4.1.601.3.1.1.15.7 | NA | |||||||||||
table · not-accessible · current SNMPv3 User Table. | |||||||||||||
| Rsnmpv3userEntry | 1.3.6.1.4.1.601.3.1.1.15.7.1 | NA | |||||||||||
row · not-accessible · current SNMPv3 user table entry attributes. snmpv3userIndex Index for each SNMPv3 user table entry. snmpv3user Reports SNMPv3 user
| |||||||||||||
| Csnmpv3userIndex | 1.3.6.1.4.1.601.3.1.1.15.7.1.1 | INTEGER (1..6) | NA | ||||||||||
column · INTEGER (1..6) · not-accessible · current Index for each SNMPv3 user table entry. | |||||||||||||
| Csnmpv3user | 1.3.6.1.4.1.601.3.1.1.15.7.1.2 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports SNMPv3 user | |||||||||||||
| Tsnmpv3manTable | 1.3.6.1.4.1.601.3.1.1.15.8 | NA | |||||||||||
table · not-accessible · current Reports SNMPv3 manager IP address. | |||||||||||||
| Rsnmpv3manEntry | 1.3.6.1.4.1.601.3.1.1.15.8.1 | NA | |||||||||||
row · not-accessible · current SNMPv3 manager entry attributes. snmpv3manIndex Index for each SNMPv3 manager entry. snmpv3manIp Report/Set snmpv3 manager IP address. snmpv3manUser Report/Set the SNMPv3 user
| |||||||||||||
| Csnmpv3manIndex | 1.3.6.1.4.1.601.3.1.1.15.8.1.1 | INTEGER (1..4) | NA | ||||||||||
column · INTEGER (1..4) · not-accessible · current Index for each SNMPv3 manager entry. This value range from 1 to 4. | |||||||||||||
| Csnmpv3manIp | 1.3.6.1.4.1.601.3.1.1.15.8.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Report/Set snmpv3 manager IP address. Note: No action shall be taken at this time. Action shall be taken when the next field 'snmpv3manUser'is written. The above only apply to SNMPv3. | |||||||||||||
| Csnmpv3manUser | 1.3.6.1.4.1.601.3.1.1.15.8.1.3 | DisplayString (SIZE (0..20)) | RW | ||||||||||
column · DisplayString (SIZE (0..20)) · read-write · current Report/Set the SNMPv3 user Note1: All user names are uppercase except the built-in user. Write username will put this user along with ip into table. Writing a null string will delete this entry from table. Any previouly written IP has no meaning (i.e. the writing the null string of username shall trigger the delete action of that entry from table. Note2: There is no modify action. User need to delete an entry and then add an new entry. Note3: The above only apply to SNMPv3. | |||||||||||||
| Nsys | 1.3.6.1.4.1.601.3.1.1.16 | ||||||||||||
| SsysPbo | 1.3.6.1.4.1.601.3.1.1.16.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The input port Phase Built-Out ode (PBO).
1 = EVENT : PBO enabled, PBO sent out, and stored
in the event buffer.
2 = REPORT : PBO enabled, PBO sent out, but not stored
in the event buffer.
3 = NONE : PBO enabled, but PBO event not sent out.
4 = DISABLE : PBO disabled.
Note: This is a system-wide command.
When the user writes this field, it will affect all DS1/E1 input modules in the system.
| |||||||||||||
| SsysResetClk | 1.3.6.1.4.1.601.3.1.1.16.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reset the specified clock. Restarts clock without maintaining current servo control values.
| |||||||||||||
| TsysKeepAliveTable | 1.3.6.1.4.1.601.3.1.1.16.3 | NA | |||||||||||
table · not-accessible · current Set system 'keep alive' mode where a trap is generated automatically on a period specified by the customer This is intended to verify the upstream support that the SSU2000 and the associated communication path is functional | |||||||||||||
| RsysAliveEntry | 1.3.6.1.4.1.601.3.1.1.16.3.1 | NA | |||||||||||
row · not-accessible · current System 'keepalive' attributes for TL1 or SNMP.
sysAliveIndex
Index value for each 'keepalive' table.
sysAliveType
Keep Alive session type:
sysAliveTime
Keep alive message interval.
| |||||||||||||
| CsysAliveIndex | 1.3.6.1.4.1.601.3.1.1.16.3.1.1 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current Index value for each 'keepalive' table. This range of the value is from 1 to 2. | |||||||||||||
| CsysAliveType | 1.3.6.1.4.1.601.3.1.1.16.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Keep Alive session type: 1 = TL1 session 2 = SNMP session
| |||||||||||||
| CsysAliveTime | 1.3.6.1.4.1.601.3.1.1.16.3.1.3 | INTEGER (0..60) | RW | ||||||||||
column · INTEGER (0..60) · read-write · current Keep alive message interval. Valid range = 1 - 60 (minutes). 0 = disabled (default) | |||||||||||||
| SsysOpmode | 1.3.6.1.4.1.601.3.1.1.16.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the operational mode in the SSU-2000. normal(1), -- Non-Subtending subtending(2), -- Domestic Subtending japanese(3) -- Japanese Subtending
| |||||||||||||
| SsysTl1Format | 1.3.6.1.4.1.601.3.1.1.16.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the TL1 format in the SSU-2000. Allows the system to generate GR-831 compliant or GR-833 compliant autonomous events. All SSU-2000 TL1 sessions will generate either GR-831 or GR-833 autonomous events. Refer to TL1 Specification 12613127-001-2 for event formats
| |||||||||||||
| SsysEvtLogin | 1.3.6.1.4.1.601.3.1.1.16.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set LOGIN and LOGOUT events from being stored in the event log. disable(1), -- not store login and logout in the event log enable(2) -- store login and logout in the event log
| |||||||||||||
| SsysAco | 1.3.6.1.4.1.601.3.1.1.16.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set ACO when writing with active. It has NOP when write with inactive. When read, it returns the current state of ACO.
| |||||||||||||
| Nusers | 1.3.6.1.4.1.601.3.1.1.17 | ||||||||||||
| TuserTable | 1.3.6.1.4.1.601.3.1.1.17.1 | NA | |||||||||||
table · not-accessible · current Report valid user names and their associated user access level. This user list is used for connecting the ICS and TL1 command parser via RS232 or Ethernet port (telnet or TL1 port). Note: the password is not reported. | |||||||||||||
| RuserEntry | 1.3.6.1.4.1.601.3.1.1.17.1.1 | NA | |||||||||||
row · not-accessible · current User table attributes:
userIndex
Index for each user entry.
userlevel
Reports user access level.
username
Reports user name.
| |||||||||||||
| CuserIndex | 1.3.6.1.4.1.601.3.1.1.17.1.1.1 | INTEGER (1..25) | NA | ||||||||||
column · INTEGER (1..25) · not-accessible · current Reports index for each user entry. This value ranges from 1 to 25. | |||||||||||||
| Cuserlevel | 1.3.6.1.4.1.601.3.1.1.17.1.1.2 | INTEGER (1..4) | RO | ||||||||||
column · INTEGER (1..4) · read-only · current Reports user access level. The user level: (1) USER - Read Only - can retrieve status information only. (2) TECHNICIAN - Read and limited set ability for fault isolating and installation setup of the unit. (3) SUPERVISORY - For configuration modifications. (4) ADMINISTRATOR - Setup or change user access. | |||||||||||||
| Cusername | 1.3.6.1.4.1.601.3.1.1.17.1.1.3 | DisplayString (SIZE (1..10)) | RO | ||||||||||
column · DisplayString (SIZE (1..10)) · read-only · current Reports user name. | |||||||||||||
| Nwho | 1.3.6.1.4.1.601.3.1.1.18 | ||||||||||||
| TwhoTable | 1.3.6.1.4.1.601.3.1.1.18.1 | NA | |||||||||||
table · not-accessible · current Reports which users are logged into all active communication ports (RS232, TL1, or telnet). It displays the username and the communication port. | |||||||||||||
| RwhoEntry | 1.3.6.1.4.1.601.3.1.1.18.1.1 | NA | |||||||||||
row · not-accessible · current Report 'who' table attributes.
whoIndex
Report index of the 'who' entry.
whoPort
Report logical communication port.
whoName
Report user name.
| |||||||||||||
| CwhoIndex | 1.3.6.1.4.1.601.3.1.1.18.1.1.1 | INTEGER (1..12) | NA | ||||||||||
column · INTEGER (1..12) · not-accessible · current Report index of the 'who' entry. This value ranges from 1 to 11. | |||||||||||||
| CwhoPort | 1.3.6.1.4.1.601.3.1.1.18.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Report logical communication port. local(1), -- serial local (craft) port coma(2), -- serial port A comb(3), -- serial port B telneta(4), -- telnet session A telnetb(5), -- telnet session B telnetc(6), -- telnet session C telnetd(7), -- telnet session D etl1a(8), -- TL1 session A etl1b(9), -- TL1 session B etl1c(10), -- TL1 session C etl1d(11) -- TL1 session D
| |||||||||||||
| CwhoName | 1.3.6.1.4.1.601.3.1.1.18.1.1.3 | DisplayString (SIZE (1..10)) | RO | ||||||||||
column · DisplayString (SIZE (1..10)) · read-only · current Report user name. | |||||||||||||
| Nntpq | 1.3.6.1.4.1.601.3.1.1.19 | ||||||||||||
| SntpqXeq | 1.3.6.1.4.1.601.3.1.1.19.1 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Report/Set the PackeTime Module. The format is defined as xAy. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) For example: 1A6 means this PackeTime located at chassis 1, slot 6 Note: the user must specify valid PackeTime address. The valid module must be physically installed in the system. Note: Writing operation causes the system to execute the ntpq. The ntpq returned value may take 2 seconds. | |||||||||||||
| TntpqTable | 1.3.6.1.4.1.601.3.1.1.19.3 | NA | |||||||||||
table · not-accessible · current PackeTime NTPQ entries. | |||||||||||||
| RntpqEntry | 1.3.6.1.4.1.601.3.1.1.19.3.1 | NA | |||||||||||
row · not-accessible · current Report NTPQ attributes. ntpqChassis Identifies which chassis is being addressed. ntpqSlot Identifies which slot is being addressed. ntpqIndex Identifies which index is being addressed. ntpqValid Reports validity of entry. ntpqPeer Reports address of NTP peer ntpqRefid Reports NTP peer reference ID ntpqStratum Reports NTP peer stratum level ntpqPoll Reports NTP peer poll interval ntpqReach Reports NTP peer reachability ntpqDelay Reports NTP peer delay ntpqOffset Reports NTP peer offset ntpqJitter Report NTP peer jitter
| |||||||||||||
| CntpqChassis | 1.3.6.1.4.1.601.3.1.1.19.3.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis, slot, and index number uniquely identify each entry. | |||||||||||||
| CntpqSlot | 1.3.6.1.4.1.601.3.1.1.19.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis, slot, and index number uniquely identify each entry. | |||||||||||||
| CntpqIndex | 1.3.6.1.4.1.601.3.1.1.19.3.1.3 | INTEGER (1..9) | NA | ||||||||||
column · INTEGER (1..9) · not-accessible · current Identifies which index is being addressed. This chassis, slot, and index number uniquely identify each entry. | |||||||||||||
| CntpqValid | 1.3.6.1.4.1.601.3.1.1.19.3.1.4 | ValidValue | RO | ||||||||||
column · ValidValue · read-only · current Reports validity of entry. If this entry is not valid, all info in this entry has no meaning. | |||||||||||||
| CntpqPeer | 1.3.6.1.4.1.601.3.1.1.19.3.1.5 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports address of NTP peer | |||||||||||||
| CntpqRefid | 1.3.6.1.4.1.601.3.1.1.19.3.1.6 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports NTP system Reference | |||||||||||||
| CntpqStratum | 1.3.6.1.4.1.601.3.1.1.19.3.1.7 | INTEGER (0..16) | RO | ||||||||||
column · INTEGER (0..16) · read-only · current Reports NTP server stratum level | |||||||||||||
| CntpqPoll | 1.3.6.1.4.1.601.3.1.1.19.3.1.8 | INTEGER (0..1024) | RO | ||||||||||
column · INTEGER (0..1024) · read-only · current Reports NTP server poll interval | |||||||||||||
| CntpqReach | 1.3.6.1.4.1.601.3.1.1.19.3.1.9 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports NTP server reachability | |||||||||||||
| CntpqDelay | 1.3.6.1.4.1.601.3.1.1.19.3.1.10 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports calculated root delay value to primary source | |||||||||||||
| CntpqOffset | 1.3.6.1.4.1.601.3.1.1.19.3.1.11 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Reports client's calculated time offset value for the specified server | |||||||||||||
| CntpqJitter | 1.3.6.1.4.1.601.3.1.1.19.3.1.12 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Report jitter value | |||||||||||||
| SntpqSyspeer | 1.3.6.1.4.1.601.3.1.1.19.4 | DisplayString (SIZE (0..20)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current Report syspeer is the IP address of peer selected by server as most likely to provide best timing information. | |||||||||||||
| SntpqSysleap | 1.3.6.1.4.1.601.3.1.1.19.5 | INTEGER (-1..2) | RO | ||||||||||
scalar · INTEGER (-1..2) · read-only · current Report system leap indicator The NTP server leap indicator (0, +1, -1, or NOSYNC). 2 = NOSYNC | |||||||||||||
| SntpqSysstratum | 1.3.6.1.4.1.601.3.1.1.19.6 | INTEGER (0..16) | RO | ||||||||||
scalar · INTEGER (0..16) · read-only · current Report system NTP server stratum level | |||||||||||||
| SntpqSysprecision | 1.3.6.1.4.1.601.3.1.1.19.7 | INTEGER (-100..0) | RO | ||||||||||
scalar · INTEGER (-100..0) · read-only · current Report measurement of a number of significant bits in NTP timestamp | |||||||||||||
| SntpqRootdelay | 1.3.6.1.4.1.601.3.1.1.19.8 | DisplayString (SIZE (0..20)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current Report calculated root delay value to primary source | |||||||||||||
| SntpqRootdispersion | 1.3.6.1.4.1.601.3.1.1.19.9 | DisplayString (SIZE (0..20)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current Report NTP system Root Dispersion (max error relative to the primary reference source at the root of the synchronization subnet, in seconds) | |||||||||||||
| SntpqSysoffset | 1.3.6.1.4.1.601.3.1.1.19.10 | DisplayString (SIZE (0..20)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current Report clients calculated time offset value for the specified server | |||||||||||||
| SntpqReftime | 1.3.6.1.4.1.601.3.1.1.19.11 | DisplayString (SIZE (0..60)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..60)) · read-only · current Report local reference time | |||||||||||||
| Nroute | 1.3.6.1.4.1.601.3.1.1.20 | ||||||||||||
| SrtXeq | 1.3.6.1.4.1.601.3.1.1.20.1 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Write access level: level 1 or above The text string of the PackeTime Module. The format is defined as xAy. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) For example: 1A6 means this PackeTime located at chassis 1, slot 6 Note1: the user must specify valid PackeTime address. The valid module must be physically installed in the system. Note2: Writing operation causes the system to execute the route table. The route table returned value may take 2 seconds. | |||||||||||||
| TrouteTable | 1.3.6.1.4.1.601.3.1.1.20.3 | NA | |||||||||||
table · not-accessible · current PackeTime route entries. | |||||||||||||
| RrtEntry | 1.3.6.1.4.1.601.3.1.1.20.3.1 | NA | |||||||||||
row · not-accessible · current PackeTime route table attributes:
rtChassis
Identifies which chassis is being addressed.
rtSlot
Identifies which slot is being addressed.
rtIndex
Identifies which index is being addressed.
rtValid
Reports validity of entry.
rtDest
Reports destination network/host
rtGate
Reports destination gateway
rtMask
Reports destination network mask
rtFlags
Reports route flags
rtMetric
Reports the 'distance' to the target (router hops).
rtRef
Reports number of references to this route.
rtUse
Report number of lookups for the route.
rtIface
Report interface associated with this route. | |||||||||||||
| CrtChassis | 1.3.6.1.4.1.601.3.1.1.20.3.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis, slot, and index number uniquely identify each entry. | |||||||||||||
| CrtSlot | 1.3.6.1.4.1.601.3.1.1.20.3.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis, slot, and index number uniquely identify each entry. | |||||||||||||
| CrtIndex | 1.3.6.1.4.1.601.3.1.1.20.3.1.3 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which index is being addressed. This chassis, slot, and index number uniquely identify each entry. | |||||||||||||
| CrtValid | 1.3.6.1.4.1.601.3.1.1.20.3.1.4 | ValidValue | RO | ||||||||||
column · ValidValue · read-only · current Reports validity of entry. If this entry is not valid, all info in this entry has no meaning. | |||||||||||||
| CrtDest | 1.3.6.1.4.1.601.3.1.1.20.3.1.5 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Reports destination network/host or 0.0.0.0 is default. | |||||||||||||
| CrtGate | 1.3.6.1.4.1.601.3.1.1.20.3.1.6 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Reports gateway address or 0.0.0.0 if none set | |||||||||||||
| CrtMask | 1.3.6.1.4.1.601.3.1.1.20.3.1.7 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Reports netmask for the destination net; '255.255.255.255' for a host destination and '0.0.0.0' for the default route. | |||||||||||||
| CrtFlags | 1.3.6.1.4.1.601.3.1.1.20.3.1.8 | DisplayString (SIZE (0..6)) | RO | ||||||||||
column · DisplayString (SIZE (0..6)) · read-only · current Reports route table flags U (route is up) H (target is a host) G (use gateway) R (reinstate route for dynamic routing) D (dynamically installed by daemon or redirect) M (modified from routing daemon or redirect) A (installed by addrconf) C (cache entry) ! (reject route) | |||||||||||||
| CrtMetric | 1.3.6.1.4.1.601.3.1.1.20.3.1.9 | INTEGER (0..4) | RO | ||||||||||
column · INTEGER (0..4) · read-only · current Reports the 'distance' to the target (router hops). | |||||||||||||
| CrtRef | 1.3.6.1.4.1.601.3.1.1.20.3.1.10 | INTEGER (0..4) | RO | ||||||||||
column · INTEGER (0..4) · read-only · current Reports number of references to this route. | |||||||||||||
| CrtUse | 1.3.6.1.4.1.601.3.1.1.20.3.1.11 | INTEGER (0..1) | RO | ||||||||||
column · INTEGER (0..1) · read-only · current Report number of lookups for the route. | |||||||||||||
| CrtIface | 1.3.6.1.4.1.601.3.1.1.20.3.1.12 | INTEGER (0..34094) | RO | ||||||||||
column · INTEGER (0..34094) · read-only · current Report interface associated with this route. 0 = eth0 (Maintenance Port) 1 = eth1 (Service Port A) 2 = eth2 (Service Port B) 3 = bond0 (Service Port Bonding) 10000-14094 = eth1.xxxx 20000-24094 = eth2.xxxx 30000-34094 = bond0.xxxx where xxxx is the VLAN ID. | |||||||||||||
| Nmtie | 1.3.6.1.4.1.601.3.1.1.30 | ||||||||||||
| SmtInpLoc | 1.3.6.1.4.1.601.3.1.1.30.1 | DisplayString (SIZE (3..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (3..10)) · read-write · current Select input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) - is the constant letter '-', and is slot/port sepearator z is the port number (1 to 3). For example: 1A3-1 means this input port located at chassis 1, slot 3, and port 1. For example: 1A3 means this input port located at chassis 1, slot 3, with all port specified. | |||||||||||||
| SmtFrTime | 1.3.6.1.4.1.601.3.1.1.30.2 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current Select starting time to measure the MTIE from. Note: the default time is defined as last 24 hours from current time. The default start-time is the current time minus 24 hours, and the default stop-time is the current time. | |||||||||||||
| SmtToTime | 1.3.6.1.4.1.601.3.1.1.30.3 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current Select the stop-time to measure the MTIE. If the 'year' field of DateAndTime is specified as zero, the default time is used. The default mtToTime is the current time. | |||||||||||||
| TmtTable | 1.3.6.1.4.1.601.3.1.1.30.5 | NA | |||||||||||
table · not-accessible · current Report the MTIE measurement. | |||||||||||||
| RmtEntry | 1.3.6.1.4.1.601.3.1.1.30.5.1 | NA | |||||||||||
row · not-accessible · current A mtie record attributes:
mtChassis
Identifies which chassis is being addressed.
mtSlot
Identifies which slot is being addressed.
mtPort
Identifies which port is being addressed.
mtA
MTIE record versus clock A.
mtB
MTIE record versus clock B. | |||||||||||||
| CmtChassis | 1.3.6.1.4.1.601.3.1.1.30.5.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CmtSlot | 1.3.6.1.4.1.601.3.1.1.30.5.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CmtPort | 1.3.6.1.4.1.601.3.1.1.30.5.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CmtA | 1.3.6.1.4.1.601.3.1.1.30.5.1.4 | OCTET STRING (SIZE (76)) | RO | ||||||||||
column · OCTET STRING (SIZE (76)) · read-only · current MTIE record versus clock A.
The MTIE record attributes:
INTEGER - entry valid ?, 1=valid, 2=invalid
DateAndTime - the staring timestamp
DateAndTime - the ending timestamp
INTEGER - which clock, 1=clka, 2=clkb
INTEGER - 0.05 second measurement value
INTEGER - 0.1 second measurement value
INTEGER - 1 second measurement value
INTEGER - 10 second measurement value
INTEGER - 100 second measurement value
INTEGER - 1000 second measurement value
INTEGER - 10000 second measurement value
INTEGER - 100000 second measurement value
note: if a non-deterministic value is used in this field, a
mtie value will be displayed as -1 (i.e. invalid value). | |||||||||||||
| CmtB | 1.3.6.1.4.1.601.3.1.1.30.5.1.5 | OCTET STRING (SIZE (76)) | RO | ||||||||||
column · OCTET STRING (SIZE (76)) · read-only · current MTIE record versus clock B.
The MTIE record attributes:
INTEGER - entry valid ?, 1=valid, 2=invalid
DateAndTime - the staring timestamp
DateAndTime - the ending timestamp
INTEGER - which clock, 1=clka, 2=clkb
INTEGER - 0.05 second measurement value
INTEGER - 0.1 second measurement value
INTEGER - 1 second measurement value
INTEGER - 10 second measurement value
INTEGER - 100 second measurement value
INTEGER - 1000 second measurement value
INTEGER - 10000 second measurement value
INTEGER - 100000 second measurement value
note: if a non-deterministic value is used in this field, a
mtie value will be displayed as -1 (i.e. invalid value). | |||||||||||||
| SmtHisInpLoc | 1.3.6.1.4.1.601.3.1.1.30.6 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Select the input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) - is the constant letter '-', and is slot/port sepearator z is the port number (1 to 3). For example: 1A3-1 means this input port located at chassis 1, slot 3, and port 1. Note: the user must specify valid input port address. The valid port is single port and must be physically installed in the system. Multiple ports are not valid. | |||||||||||||
| SmtHisClk | 1.3.6.1.4.1.601.3.1.1.30.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clock reference used for reporting of MTIE History.
| |||||||||||||
| SmtHisCnt | 1.3.6.1.4.1.601.3.1.1.30.8 | INTEGER (1..100) | RW | ||||||||||
scalar · INTEGER (1..100) · read-write · current Number of days of MTIE History to report. The range = 1 - 100. Default value for this field = 1. | |||||||||||||
| TmtHisTable | 1.3.6.1.4.1.601.3.1.1.30.9 | NA | |||||||||||
table · not-accessible · current A list of mtie history entries. Note: this table is based upon the following values: mtHisInpLoc - the location of the input port mtHisCnt - total number of mtie hostory want to query. | |||||||||||||
| RmtHisEntry | 1.3.6.1.4.1.601.3.1.1.30.9.1 | NA | |||||||||||
row · not-accessible · current MTIE 24-hours history attributes.
mtHisChassis
Identifies which chassis is being addressed.
mtHisSlot
Identifies which slot is being addressed.
mtHisPort
Identifies which port is being addressed.
mtHisIndex
Index for the MTIE record.
mtHisV
MTIE record versus selected clock.
| |||||||||||||
| CmtHisChassis | 1.3.6.1.4.1.601.3.1.1.30.9.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CmtHisSlot | 1.3.6.1.4.1.601.3.1.1.30.9.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CmtHisPort | 1.3.6.1.4.1.601.3.1.1.30.9.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CmtHisIndex | 1.3.6.1.4.1.601.3.1.1.30.9.1.4 | INTEGER (1..100) | NA | ||||||||||
column · INTEGER (1..100) · not-accessible · current Index for the MTIE record. Valid range = 1 - 100. | |||||||||||||
| CmtHisV | 1.3.6.1.4.1.601.3.1.1.30.9.1.5 | OCTET STRING (SIZE (76)) | RO | ||||||||||
column · OCTET STRING (SIZE (76)) · read-only · current MTIE record versus selected clock.
The MTIE record attributes:
INTEGER - entry valid ?, 1=valid, 2=invalid
DateAndTime - the staring timestamp
DateAndTime - the ending timestamp
INTEGER - which clock, 1=clka, 2=clkb
INTEGER - 0.05 second measurement value
INTEGER - 0.1 second measurement value
INTEGER - 1 second measurement value
INTEGER - 10 second measurement value
INTEGER - 100 second measurement value
INTEGER - 1000 second measurement value
INTEGER - 10000 second measurement value
INTEGER - 100000 second measurement value
note: if a non-deterministic value is used in this field, a
mtie value will be displayed as -1 (i.e. invalid value). | |||||||||||||
| Ntdev | 1.3.6.1.4.1.601.3.1.1.31 | ||||||||||||
| StdInpLoc | 1.3.6.1.4.1.601.3.1.1.31.1 | DisplayString (SIZE (3..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (3..10)) · read-write · current Select input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) - is the constant letter '-', and is slot/port sepearator z is the port number (1 to 3). For example: 1A3-1 means this input port located at chassis 1, slot 3, and port 1. For example: 1A3 means this input port located at hassis 1, slot 3, with all port specified. | |||||||||||||
| StdFrTime | 1.3.6.1.4.1.601.3.1.1.31.2 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current Select starting time to measure the TDEV from. Note: the default time is defined as last 24 hours from current time. The default start-time is the current time minus 24 hours, and the default stop-time is the current time. | |||||||||||||
| StdToTime | 1.3.6.1.4.1.601.3.1.1.31.3 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current Select stop time to measure the TDEV from. Note: the default time is the current time. | |||||||||||||
| TtdTable | 1.3.6.1.4.1.601.3.1.1.31.5 | NA | |||||||||||
table · not-accessible · current Report the TDEV measurement. | |||||||||||||
| RtdEntry | 1.3.6.1.4.1.601.3.1.1.31.5.1 | NA | |||||||||||
row · not-accessible · current A mtie record attributes:
tdChassis
Identifies which chassis is being addressed.
tdSlot
Identifies which slot is being addressed.
tdPort
Identifies which port is being addressed.
tdA
TDEV record versus clock A.
tdB
TDEV record versus clock B. | |||||||||||||
| CtdChassis | 1.3.6.1.4.1.601.3.1.1.31.5.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CtdSlot | 1.3.6.1.4.1.601.3.1.1.31.5.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CtdPort | 1.3.6.1.4.1.601.3.1.1.31.5.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CtdA | 1.3.6.1.4.1.601.3.1.1.31.5.1.4 | OCTET STRING (SIZE (124)) | RO | ||||||||||
column · OCTET STRING (SIZE (124)) · read-only · current TDEV record versus clock A: TDEV record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - the ending timestamp INTEGER - which clock, 1=clka, 2=clkb INTEGER - 0.1 second measurement value INTEGER - 0.3 second measurement value INTEGER - 0.6 second measurement value INTEGER - 1 second measurement value INTEGER - 3 second measurement value INTEGER - 6 second measurement value INTEGER - 10 second measurement value INTEGER - 30 second measurement value INTEGER - 60 second measurement value INTEGER - 100 second measurement value INTEGER - 300 second measurement value INTEGER - 600 second measurement value INTEGER - 1000 second measurement value INTEGER - 3000 second measurement value INTEGER - 6000 second measurement value INTEGER - 10000 second measurement value Note: The value are for the time period, the value provided are multpled by 100 times, to avoid floating number representaion. | |||||||||||||
| CtdB | 1.3.6.1.4.1.601.3.1.1.31.5.1.5 | OCTET STRING (SIZE (124)) | RO | ||||||||||
column · OCTET STRING (SIZE (124)) · read-only · current TDEV record versus clock B: TDEV record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - the ending timestamp INTEGER - which clock, 1=clka, 2=clkb INTEGER - 0.1 second measurement value INTEGER - 0.3 second measurement value INTEGER - 0.6 second measurement value INTEGER - 1 second measurement value INTEGER - 3 second measurement value INTEGER - 6 second measurement value INTEGER - 10 second measurement value INTEGER - 30 second measurement value INTEGER - 60 second measurement value INTEGER - 100 second measurement value INTEGER - 300 second measurement value INTEGER - 600 second measurement value INTEGER - 1000 second measurement value INTEGER - 3000 second measurement value INTEGER - 6000 second measurement value INTEGER - 10000 second measurement value Note: The value are for the time period, the value provided are multpled by 100 times, to avoid floating number representaion. | |||||||||||||
| StdHisInpLoc | 1.3.6.1.4.1.601.3.1.1.31.6 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Selected input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 3 to 11) - is the constant letter '-', and is slot/port sepearator z is the port number (1 to 3). For example: 1A3-1 means this input port located at chassis 1, slot 3, and port 1 Note: the user must specify valid input port address. The valid port is single port and must be physically installed in the system. Multiple ports are not valid. | |||||||||||||
| StdHisClk | 1.3.6.1.4.1.601.3.1.1.31.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Report/Set which clock is used to make the TDEV measurement.
| |||||||||||||
| StdHisCnt | 1.3.6.1.4.1.601.3.1.1.31.8 | INTEGER (1..100) | RW | ||||||||||
scalar · INTEGER (1..100) · read-write · current Report/Set the number of days of TDEV History to report. The range = 1 - 100. Default value for this field = 1. | |||||||||||||
| TtdHisTable | 1.3.6.1.4.1.601.3.1.1.31.9 | NA | |||||||||||
table · not-accessible · current A list of tdev history entries. Note: this table is based upon the following values: tdHisInpLoc - the location of the input port tdHisCnt - total number of tdev hostory want to query. | |||||||||||||
| RtdHisEntry | 1.3.6.1.4.1.601.3.1.1.31.9.1 | NA | |||||||||||
row · not-accessible · current TDEV 24-hours history attributes.
tdHisChassis
Identifies which chassis is being addressed.
tdHisSlot
Identifies which slot is being addressed.
tdHisPort
Identifies which port is being addressed.
tdHisIndex
Index for the TDEV record.
tdHisV
TDEV record versus selected clock.
| |||||||||||||
| CtdHisChassis | 1.3.6.1.4.1.601.3.1.1.31.9.1.1 | INTEGER (1) | NA | ||||||||||
column · INTEGER (1) · not-accessible · current Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CtdHisSlot | 1.3.6.1.4.1.601.3.1.1.31.9.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CtdHisPort | 1.3.6.1.4.1.601.3.1.1.31.9.1.3 | INTEGER (1..3) | NA | ||||||||||
column · INTEGER (1..3) · not-accessible · current Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. | |||||||||||||
| CtdHisIndex | 1.3.6.1.4.1.601.3.1.1.31.9.1.4 | INTEGER (1..100) | NA | ||||||||||
column · INTEGER (1..100) · not-accessible · current Index value for the TDEV history record. Valid range = 1 - 100. | |||||||||||||
| CtdHisV | 1.3.6.1.4.1.601.3.1.1.31.9.1.5 | OCTET STRING (SIZE (124)) | RO | ||||||||||
column · OCTET STRING (SIZE (124)) · read-only · current TDEV record versus selected clock. The TDEV record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - the ending timestamp INTEGER - which clock, 1=clka, 2=clkb INTEGER - 0.1 second measurement value INTEGER - 0.3 second measurement value INTEGER - 0.6 second measurement value INTEGER - 1 second measurement value INTEGER - 3 second measurement value INTEGER - 6 second measurement value INTEGER - 10 second measurement value INTEGER - 30 second measurement value INTEGER - 60 second measurement value INTEGER - 100 second measurement value INTEGER - 300 second measurement value INTEGER - 600 second measurement value INTEGER - 1000 second measurement value INTEGER - 3000 second measurement value INTEGER - 6000 second measurement value INTEGER - 10000 second measurement value Note: The value are for the time period, the value provided are multpled by 100 times, to avoid floating number representaion. | |||||||||||||
| Nptpclient | 1.3.6.1.4.1.601.3.1.1.36 | ||||||||||||
| TptpclientTable | 1.3.6.1.4.1.601.3.1.1.36.1 | NA | |||||||||||
table · not-accessible · current Reports PackeTime PTP client list entries. Usage: you need to specify a PTP blade address in ptpclientParmLoc, and then execute the command ptpclientCmdXeq first. The PTP client list will be saved. This ptpclientTable will display all the PTP client list contents of this saved information. | |||||||||||||
| RptpclientEntry | 1.3.6.1.4.1.601.3.1.1.36.1.1 | NA | |||||||||||
row · not-accessible · current Reports PackeTime PTP client list containing each PTP client status value.
ptpclientChassis
Identifies which chassis is being addressed.
ptpclientSlot
Identifies which slot is being addressed.
ptpclientData
Reports the contents of the Client data TLV: | |||||||||||||
| CptpclientChassis | 1.3.6.1.4.1.601.3.1.1.36.1.1.1 | INTEGER (1..5) | NA | ||||||||||
column · INTEGER (1..5) · not-accessible · current Identifies which chassis is being addressed. This chassis and slot number uniquely identify each entry. | |||||||||||||
| CptpclientSlot | 1.3.6.1.4.1.601.3.1.1.36.1.1.2 | INTEGER (1..20) | NA | ||||||||||
column · INTEGER (1..20) · not-accessible · current Identifies which slot is being addressed. This chassis and slot number uniquely identify each entry. | |||||||||||||
| CptpclientData | 1.3.6.1.4.1.601.3.1.1.36.1.1.3 | OCTET STRING (SIZE (40)) | RO | ||||||||||
column · OCTET STRING (SIZE (40)) · read-only · current Reports the contents of the Client data TLV: INTEGER - mode, 0:dynamic, 1:static INTEGER - ip address OCTET - clock id INTEGER - VLAN ID, if 0xffff, then there is no vlan INTEGER - VLAN Priority INTEGER - Sync Limit (signed value), if 99, the disable INTEGER - Announce Limit (signed value), if 99, the disable INTEGER - Delay Limit (signed value), if 99, the disable | |||||||||||||
| SptpclientParmLoc | 1.3.6.1.4.1.601.3.1.1.36.2 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Set the ports VLAN address. where x is the chassis number: in this case is 1-5, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot number: (range is 1 to 14) For example: 1A6 means this port located at chassis 1, slot 6 Note: the user must specify valid PTP address. The valid port must be physically installed in the system. | |||||||||||||
| SptpclientCmdXeq | 1.3.6.1.4.1.601.3.1.1.36.3 | YesValue | RW | ||||||||||
scalar · YesValue · read-write · current Reports the current client list in the module. The max number of client is 400 | |||||||||||||
| NmTrapReq | 1.3.6.1.4.1.601.3.1.1.50 | ||||||||||||
| StprTag | 1.3.6.1.4.1.601.3.1.1.50.1 | INTEGER (1..2147483647) | RW | ||||||||||
scalar · INTEGER (1..2147483647) · read-write · current This command is to ask the agent to resend a lost trap. The lost trap is specified by its trap tag number. The trap tag number is a 32-bit positive integer. It will rollover to one, when it reaches the maximum number 2147483647. If the tag number is beyond the agent's abilities to handle, it will respond with an error. Otherwise, the requested trap will be sent to the manager. Note: When resending a trap, the 'tpEvt' field of trap is set to 2 (RE-SEND). In the normal trap, the'tpEvt' field of trap is set to 1 (AUTONOMOUS). | |||||||||||||
| NmTrapObjs | 1.3.6.1.4.1.601.3.1.1.51 | ||||||||||||
| StpTag | 1.3.6.1.4.1.601.3.1.1.51.1 | INTEGER (1..2147483647) | RO | ||||||||||
scalar · INTEGER (1..2147483647) · read-only · current The trap counter which increments for each trap. | |||||||||||||
| StpEvt | 1.3.6.1.4.1.601.3.1.1.51.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indication of whether trap is an autonomous event or resend by user request.
| |||||||||||||
| StpId | 1.3.6.1.4.1.601.3.1.1.51.3 | INTEGER (0..255) | RO | ||||||||||
scalar · INTEGER (0..255) · read-only · current The trap ID number. | |||||||||||||
| StpMCode | 1.3.6.1.4.1.601.3.1.1.51.4 | TModuleCode | RO | ||||||||||
scalar · TModuleCode · read-only · current The trap module hex code (16-bits). | |||||||||||||
| StpTimestamp | 1.3.6.1.4.1.601.3.1.1.51.5 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current This DateAndTime string contains the event timestamp. | |||||||||||||
| StpChassis | 1.3.6.1.4.1.601.3.1.1.51.6 | INTEGER (1..5) | RO | ||||||||||
scalar · INTEGER (1..5) · read-only · current The trap chassis number. In SSU2000, there are some modules have to inserted in the main chassis: COMM, CLOCK, INPUT, GPS modules. | |||||||||||||
| StpSlot | 1.3.6.1.4.1.601.3.1.1.51.7 | INTEGER (1..20) | RO | ||||||||||
scalar · INTEGER (1..20) · read-only · current The trap slot number. In SSU2000, there are some modules have to inserted in the fixed locations: COMM - 1A2 CLOCK - 1A1 or 1A17 (physical slot address) GPS - 1A3 or 1A5. | |||||||||||||
| StpPort | 1.3.6.1.4.1.601.3.1.1.51.8 | INTEGER (0..20) | RO | ||||||||||
scalar · INTEGER (0..20) · read-only · current The trap port number. If value 0, it means (DON'T CARE) whole module. In SSU2000, most of the DS1/E1 input module alarms specify the port number (1-3). The remaining modules specify the port number as either '0' or '1'. | |||||||||||||
| StpAlmCode | 1.3.6.1.4.1.601.3.1.1.51.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The trap alarm code. Relationship between tpAlmCode and tpNtfCode. For example: If for the set MINOR alarm, the tpAlmCode is MINOR and the tpNtfCode is MINOR. If the MINIR alarm is cleared, the tpAlmCode is MINOR and the tpNtfCode is CLEAR. For all events: The tpAlmCode and tpNtfCode are REPORT.
| |||||||||||||
| StpNtfCode | 1.3.6.1.4.1.601.3.1.1.51.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The trap alarm notification code. Relationship between tpAlmCode and tpNtfCode. For example for alarms: If for the set MINOR alarm, the tpAlmCode is MINOR and the tpNtfCode is MINOR. If the MINOR alarm is cleared, the tpAlmCode is MINOR and the tpNtfCode is CLEAR. For all events: The tpAlmCode and tpNtfCode are REPORT.
| |||||||||||||
| StpElevated | 1.3.6.1.4.1.601.3.1.1.51.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This alarm if elevated.
| |||||||||||||
| StpDescr | 1.3.6.1.4.1.601.3.1.1.51.12 | DisplayString (SIZE (0..255)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · current The text string description of the event. | |||||||||||||
| NmTraps | 1.3.6.1.4.1.601.3.1.1.52 | ||||||||||||
| NssuTraps | 1.3.6.1.4.1.601.3.1.1.52.0 | ||||||||||||
node · current The SSU2000 traps | |||||||||||||
| !ssuEvent | 1.3.6.1.4.1.601.3.1.1.52.0.1 | ||||||||||||
notification · current SSU2000 trap object which specifies trap tag number, trap id number, module hex code, timestamp, chassis number, slot number, port number, alarm code, alarm notification code, and the text string description. | |||||||||||||
| NsInterfaces | 1.3.6.1.4.1.601.3.1.1.60 | ||||||||||||
| SsifNtpNumber | 1.3.6.1.4.1.601.3.1.1.60.1 | INTEGER (0..1) | RO | ||||||||||
scalar · INTEGER (0..1) · read-only · current 0 = if no NTP resource present 1 = if NTP presentt | |||||||||||||
| SsifSnmpv2Number | 1.3.6.1.4.1.601.3.1.1.60.2 | INTEGER (0..1) | RO | ||||||||||
scalar · INTEGER (0..1) · read-only · current 0 = if no SNMPv2 resource present (note: it is load resource, not enable/disable) 1 = if SNMPv2 present | |||||||||||||
| SsifSnmpv3Number | 1.3.6.1.4.1.601.3.1.1.60.3 | INTEGER (0..1) | RO | ||||||||||
scalar · INTEGER (0..1) · read-only · current 0 = if no SNMPv3 resource present (note: it is load resource, not enable/disable) 1 = if SNMPv3 present | |||||||||||||
| SsifClkNumber | 1.3.6.1.4.1.601.3.1.1.60.10 | INTEGER (0..2) | RO | ||||||||||
scalar · INTEGER (0..2) · read-only · current 0 = if no Clock Module present x = number of Clock Modules present | |||||||||||||
| SsifGpsNumber | 1.3.6.1.4.1.601.3.1.1.60.11 | INTEGER (0..2) | RO | ||||||||||
scalar · INTEGER (0..2) · read-only · current 0 = if no GPS Module present x = number of GPS Modules present | |||||||||||||
| SsifInpDs1Number | 1.3.6.1.4.1.601.3.1.1.60.12 | INTEGER (0..10) | RO | ||||||||||
scalar · INTEGER (0..10) · read-only · current 0 = if no DS1 Input Module present x = number of DS1 Input Modules present | |||||||||||||
| SsifInpE1Number | 1.3.6.1.4.1.601.3.1.1.60.13 | INTEGER (0..10) | RO | ||||||||||
scalar · INTEGER (0..10) · read-only · current 0 = if no E1 Input Module present x = number of E1 Input Modules present | |||||||||||||
| SsifInpCcNumber | 1.3.6.1.4.1.601.3.1.1.60.14 | INTEGER (0..10) | RO | ||||||||||
scalar · INTEGER (0..10) · read-only · current 0 = if no ANSI CC Input Module present x = number of ANSI CC Input Modules present | |||||||||||||
| SsifOutDs1Number | 1.3.6.1.4.1.601.3.1.1.60.15 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no DS1 Output Module present x = number of DS1 Output Modules present | |||||||||||||
| SsifOutE1Number | 1.3.6.1.4.1.601.3.1.1.60.16 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no E1 Output Module present x = number of E1 Output Modules present | |||||||||||||
| SsifOut2048Number | 1.3.6.1.4.1.601.3.1.1.60.17 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no 2048 Output Module present x = number of 2048 Output Modules present | |||||||||||||
| SsifOutCcNumber | 1.3.6.1.4.1.601.3.1.1.60.18 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no ANSI CC Output Module present x = number of ANSI CC Output Modules present | |||||||||||||
| SsifOutE12048Number | 1.3.6.1.4.1.601.3.1.1.60.19 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no E1/2048KHZ Output Module present x = number of E1/2048KHZ Output Modules present | |||||||||||||
| SsifOut422Number | 1.3.6.1.4.1.601.3.1.1.60.20 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no RS422 Output Module present x = number of RS422 Output Modules present | |||||||||||||
| SsifLrmDs1Number | 1.3.6.1.4.1.601.3.1.1.60.21 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no DS1 LRM Module present x = number of DS1 LRM Modules present | |||||||||||||
| SsifOutJsineNumber | 1.3.6.1.4.1.601.3.1.1.60.22 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no Japanese Sine (J/SW) Output Module present x = number of Sine (J/SW) Output Modules present | |||||||||||||
| SsifInpJsineNumber | 1.3.6.1.4.1.601.3.1.1.60.23 | INTEGER (0..10) | RO | ||||||||||
scalar · INTEGER (0..10) · read-only · current 0 = if no Japanese Sine (J/SW) Input Module present x = number of Sine (J/SW) Input Modules present | |||||||||||||
| SsifOutJccNumber | 1.3.6.1.4.1.601.3.1.1.60.24 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no Japanese CC (J/CC) Output Module present x = number of Japanese CC (J/CC) Output Modules present | |||||||||||||
| SsifInpJccNumber | 1.3.6.1.4.1.601.3.1.1.60.25 | INTEGER (0..10) | RO | ||||||||||
scalar · INTEGER (0..10) · read-only · current 0 = if no Japanese CC (J/CC) Input Module present x = number of Japanese CC (J/CC) Input Modules present | |||||||||||||
| SsifLrmE1Number | 1.3.6.1.4.1.601.3.1.1.60.26 | INTEGER (0..100) | RO | ||||||||||
scalar · INTEGER (0..100) · read-only · current 0 = if no E1 LRM Module present x = number of E1 LRM Modules present | |||||||||||||
Textual conventions
DateAndTimeOCTET STRING (SIZE (8 | 11))Display hint:
2d-1d-1d,1d:1d:1d.1d,1a1d:1dA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.TAntHeightOCTET STRING (SIZE (4))Display hint:
1a2d.1dantenna height specification. field octets contents range ----- ------ -------- ----- 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh
TLatAndLonOCTET STRING (SIZE (5))Display hint:
1a1d:1d:1d.1dantenna latitude and longitude specification. field octets contents range ----- ------ -------- ----- 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss
TLocalTimeOffsetOCTET STRING (SIZE (3))Display hint:
1a1d:1dA local time offset specification. field octets contents range ----- ------ -------- ----- 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours range is 0..13 For example, the -6 local time offset would be displayed as: -6:0
TModuleCodeINTEGER (0..65535)Display hint:
xThe module hex code 1001 Input 3 Port 1002 Input 1 Port 1003 Input DS1 3 Port 1004 Input DS1 1 Port 1005 Input E1 3 Port 1006 Input E1 1 Port 1008 Input GPS 1010 Input Composite Clock (1 Port) 1012 Input Japanese CC (1 Port) 1013 Input Japanese Sine (3 Port) 2001 Clock Stratum 2E Rubidium 2002 Clock Stratum 3E 2003 Clock Type I 3001 Communication Module 4001 Output DS1 4002 Output E1 4003 Output Composite Clock 4004 Output 2048 kHz 4007 Output EIA 422 4008 Output E1/2048 kHz 4009 DS1 Line Retiming Module 4 Ports 400A DS1 Line Retiming Module 2 Ports 400B Output Japanese CC 400C Output Japanese Sine 400D E1 Line Retiming Module 4 Ports 4021 NTP Blade 4022 PTP Blade 5001 Buffer Card
TSsmINTEGER (0..255)Display hint:
xThe ssm hex code
Traps / Notifications
- ssuEvent
1.3.6.1.4.1.601.3.1.1.52.0.1