ARHANGELSK-GLOBAL-REG
Majorpower Corporationsnmptranslate -m ARHANGELSK-GLOBAL-REG -Tpsnmpwalk -v2c -c <community> -m ARHANGELSK-GLOBAL-REG <host> 1.3.6.1.4.1.40865Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nmts-com | 1.3.6.1.4.1.40865 | ||||||||||||
| Nmts | 1.3.6.1.4.1.40865.1 | ||||||||||||
| Smanufacturer | 1.3.6.1.4.1.40865.1.1 | OCTET STRING | RO | mandatory | |||||||||
scalar · OCTET STRING · read-only · mandatory The name of the equipment manufacturer. | |||||||||||||
| Smodelname | 1.3.6.1.4.1.40865.1.2 | OCTET STRING | RO | mandatory | MTS-COM | ||||||||
scalar · OCTET STRING · read-only · mandatory The controller name used in the equipment. Example values from LibreNMS test devices
| |||||||||||||
| Scontrollerswversion | 1.3.6.1.4.1.40865.1.3 | OCTET STRING | RO | mandatory | 0041 | ||||||||
scalar · OCTET STRING · read-only · mandatory The firmware version of the controller. Example values from LibreNMS test devices
| |||||||||||||
| Ssitename | 1.3.6.1.4.1.40865.1.4 | OCTET STRING (SIZE (0..30)) | RW | mandatory | |||||||||
scalar · OCTET STRING (SIZE (0..30)) · read-write · mandatory The location of the equipment, this object should be set by the administrator not more than 30 characters. | |||||||||||||
| Ssystemstatus | 1.3.6.1.4.1.40865.1.5 | INTEGER | RO | mandatory | normal(1) | ||||||||
scalar · INTEGER · read-only · mandatory Status of the equipment: normal(1)----there is no active alarm minoralarm(2)----minor alarm occurs majoralarm(3)----major alarm occurs
Example values from LibreNMS test devices
| |||||||||||||
| Ssystemvoltage | 1.3.6.1.4.1.40865.1.6 | INTEGER | RO | mandatory | 53616 | ||||||||
scalar · INTEGER · read-only · mandatory System voltage output, get in mV. Example values from LibreNMS test devices
| |||||||||||||
| Ssystemcurrent | 1.3.6.1.4.1.40865.1.7 | INTEGER | RO | mandatory | 8453 | ||||||||
scalar · INTEGER · read-only · mandatory System current (load current) output, get in mA. Example values from LibreNMS test devices
| |||||||||||||
| Sacvoltage | 1.3.6.1.4.1.40865.1.8 | INTEGER | RO | mandatory | 243904 | ||||||||
scalar · INTEGER · read-only · mandatory 1phase AC voltage, get from rectifier in mV. Example values from LibreNMS test devices
| |||||||||||||
| Sbatterynumber | 1.3.6.1.4.1.40865.1.9 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the number of battery in the power system. | |||||||||||||
| Ssystemcapacityavailable | 1.3.6.1.4.1.40865.1.10 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Battery capacity available, get in % of the total capacity. | |||||||||||||
| Sbatterycurrent | 1.3.6.1.4.1.40865.1.11 | INTEGER | RO | mandatory | 17 | ||||||||
scalar · INTEGER · read-only · mandatory Battery current, get in A, including positive and negative sign. Positive indicates charge whereas negative discharge. Example values from LibreNMS test devices
| |||||||||||||
| Stemperature1 | 1.3.6.1.4.1.40865.1.12 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The first route temperature, stored as 1 Celsius degree. for example,25000 is 25 Celsius degree | |||||||||||||
| Sbatterymode | 1.3.6.1.4.1.40865.1.13 | INTEGER | RO | mandatory | floatcharge(1) | ||||||||
scalar · INTEGER · read-only · mandatory The status of battery work: floatcharge(1)----battery in float charge mode equalizecharge(2)----battery in equalize charge mode
Example values from LibreNMS test devices
| |||||||||||||
| Srectnumsum | 1.3.6.1.4.1.40865.1.14 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the number of rectifiers which communicate with the monitor successfully return the integer | |||||||||||||
| Sreccommunicationstatus | 1.3.6.1.4.1.40865.1.15 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The communication status between agent and rectifiers: normal(1)----communication normal interrupt(2)----communication interrupt occurs
| |||||||||||||
| Srectoutputvoltage | 1.3.6.1.4.1.40865.1.16 | INTEGER | RO | mandatory | 53476 | ||||||||
scalar · INTEGER · read-only · mandatory the output of the rectifier. get from rectifier in mV. Example values from LibreNMS test devices
| |||||||||||||
| Srectoutputcurrent | 1.3.6.1.4.1.40865.1.17 | INTEGER | RO | mandatory | 4388 | ||||||||
scalar · INTEGER · read-only · mandatory the current of the rectifier, get from rectifier in mA Example values from LibreNMS test devices
| |||||||||||||
| Srectcurrentref | 1.3.6.1.4.1.40865.1.18 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the current reference of the rectifier which limits the output current of the rectifier. get in (mA) | |||||||||||||
| Srectinputvoltage | 1.3.6.1.4.1.40865.1.19 | INTEGER | RO | mandatory | 243840 | ||||||||
scalar · INTEGER · read-only · mandatory the input ac voltage of the rectifier. get in (mV) Example values from LibreNMS test devices
| |||||||||||||
| Srectopenstate | 1.3.6.1.4.1.40865.1.20 | INTEGER | RO | mandatory | 1 | ||||||||
scalar · INTEGER · read-only · mandatory the open status of the rectifier. rectopenstate(0)--rectifier shutdown rectopenstate(1)--rectifier power on. Example values from LibreNMS test devices
| |||||||||||||
| Srectpluginnotok | 1.3.6.1.4.1.40865.1.21 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory rectifier plug in the power system whether ok or not. rectpluginnotok(0)--normal rectpluginnotok(1)--alarm . Example values from LibreNMS test devices
| |||||||||||||
| Shvsdflag | 1.3.6.1.4.1.40865.1.22 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory HVSD flag--output over voltage shutdown. hvsdflag(0)--normal hvsdflag(1)--alarm. Example values from LibreNMS test devices
| |||||||||||||
| Soutputundervol | 1.3.6.1.4.1.40865.1.23 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory the status of the output of the rectifier. outputundervol(0)--normal outputundervol(1)--the output voltage low makes alarm Example values from LibreNMS test devices
| |||||||||||||
| Sinputovervol | 1.3.6.1.4.1.40865.1.24 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the status of rectifier's input voltage. inputovervol(0)-- normal inputovervol(1)--the input voltage is over than standard voltage. | |||||||||||||
| Sinputundervol | 1.3.6.1.4.1.40865.1.25 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of rectifier's input voltage. inputundervol(0)-- normal inputundervol(1)--the input voltage is lower than standard voltage. Example values from LibreNMS test devices
| |||||||||||||
| Sfanisnotrotate | 1.3.6.1.4.1.40865.1.26 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the rectifier's fan is whether ok or not. fanisnotrotate(0)--normal fanisnotrotate(1)--alarm Example values from LibreNMS test devices
| |||||||||||||
| Sambientovertemp | 1.3.6.1.4.1.40865.1.27 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of the ambient temperature. ambientovertemp(0)--normal ambientovertemp(1)--the ambient temperature is higher than standard temperature. Example values from LibreNMS test devices
| |||||||||||||
| Sambientundertemp | 1.3.6.1.4.1.40865.1.28 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of the ambient temperature. ambientundertemp(0)--normal ambientundertemp(1)--the ambient temperature is lower than standard temperature.. Example values from LibreNMS test devices
| |||||||||||||
| Spfcovertemp | 1.3.6.1.4.1.40865.1.29 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of the rectifier 's PFC temperature. pfcovertemp(0)--normal pfcovertemp(1)--the temperature of the PFC is higher than standard temperature. Example values from LibreNMS test devices
| |||||||||||||
| Sdcdcovertemp | 1.3.6.1.4.1.40865.1.30 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of the rectifier's DCDC temperature. dcdcovertemp(0)--normal dcdcovertemp(1)--the temperature of the DCDC is higher than standard temperature.. Example values from LibreNMS test devices
| |||||||||||||
| Scommunicationnotok | 1.3.6.1.4.1.40865.1.31 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the status of the communication between the rectifiers. communicationnotok(0)--normal communicationnotok(1)--the communication is unsuccessful. | |||||||||||||
| Sdcdceepromfault | 1.3.6.1.4.1.40865.1.32 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of the DCDC eeprom dcdceepromfault(0)--normal dcdceepromfault(1)--fault Example values from LibreNMS test devices
| |||||||||||||
| Spowderatedbyacvol | 1.3.6.1.4.1.40865.1.33 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the output power is derated by the ac voltage. powderatedbyacvol(0)--normal powderatedbyacvol(1)--alarm Example values from LibreNMS test devices
| |||||||||||||
| Spowderatedbytemp | 1.3.6.1.4.1.40865.1.34 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the output power derated by the temperature. powderatedbytemp(0)--normal powderatedbytemp(1)--alarm. Example values from LibreNMS test devices
| |||||||||||||
| Scurrentsharenotok | 1.3.6.1.4.1.40865.1.35 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of the rectifier current shared with other rectifier whether ok or not. currentsharenotok(0)--normal currentsharenotok(1)--alarm Example values from LibreNMS test devices
| |||||||||||||
| Spfceepromfault | 1.3.6.1.4.1.40865.1.36 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the status of the pfc eeprom
pfceepromfault(0)--normal
pfceepromfault(1)--faultExample values from LibreNMS test devices
| |||||||||||||
| Scommwithmonitorlost | 1.3.6.1.4.1.40865.1.37 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the status of the communication between the rectifiers and the monitor.
commwithmonitorlost(0)--normal
commwithmonitorlost(1)--alarm | |||||||||||||
| Sacstopflag | 1.3.6.1.4.1.40865.1.38 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory whether the AC voltage is normal or not, acstopflag(0)--AC voltage is normal acstopflag(2)--AC voltage is out of the range Example values from LibreNMS test devices
| |||||||||||||
| Sdcvoltagealarm | 1.3.6.1.4.1.40865.1.39 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory whether the output of the rectifier is normal or not. dcvoltagealarm(0)--normal. dcvoltagealarm(1)--alarm. Example values from LibreNMS test devices
| |||||||||||||
| Sbattcurralarm | 1.3.6.1.4.1.40865.1.40 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory whether the current of the battery is higher than the standard current which set up. battcurralarm(0)--normal. battcurralarm(1)--alarm. | |||||||||||||
| Sbatttempalarm | 1.3.6.1.4.1.40865.1.41 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory whether the temperature of the battery is normal or not. batttemperaturealarm(0)--normal. batttemperaturealarm(1)--alarm. | |||||||||||||
| Sbattfusebreak | 1.3.6.1.4.1.40865.1.42 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory the fuse of the battery loop. battfusebreak(0)--the battery is well. battfusebreak(1)--the battery is broken. Example values from LibreNMS test devices
| |||||||||||||
| Sloadfusenum | 1.3.6.1.4.1.40865.1.43 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the number of the load in the system. | |||||||||||||
| Sloadfusebreak | 1.3.6.1.4.1.40865.1.44 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory the fuse of the load loop. loadfusebreak(0)--the load is well. loadfusebreak(1)--the load is broken. Example values from LibreNMS test devices
| |||||||||||||
| Sbatteryprotectflag | 1.3.6.1.4.1.40865.1.45 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory BLVD --the battery low voltage disconnected batteryprotectflag(0)--connected load batteryprotectflag(1)--disconnected load Example values from LibreNMS test devices
| |||||||||||||
| Sdigitalinput | 1.3.6.1.4.1.40865.1.46 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The digital input status of the DI port,0x01 indicates DI0 and 0x02 indicates DI1, and so on. | |||||||||||||
| Sactivealarmsum | 1.3.6.1.4.1.40865.1.47 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory the sum of active alarms. | |||||||||||||
| Sdateyear | 1.3.6.1.4.1.40865.1.48 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the current date of year. | |||||||||||||
| Sdatemonth | 1.3.6.1.4.1.40865.1.49 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the current date of month. | |||||||||||||
| Sdateday | 1.3.6.1.4.1.40865.1.50 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the current date of day. | |||||||||||||
| Stimehour | 1.3.6.1.4.1.40865.1.51 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the current time of hour. | |||||||||||||
| Stimeminute | 1.3.6.1.4.1.40865.1.52 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the current time of minute. | |||||||||||||
| Stimesecond | 1.3.6.1.4.1.40865.1.53 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the current time of second. | |||||||||||||
| Sfloatchargevol | 1.3.6.1.4.1.40865.1.54 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the float voltage of the battery,get in mV. | |||||||||||||
| Seqchargevol | 1.3.6.1.4.1.40865.1.55 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the EQ voltage of the battery,get in mV. | |||||||||||||
| Sbattovercurr | 1.3.6.1.4.1.40865.1.56 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the maximum of the battery current which make alarm. get in (A). | |||||||||||||
| Sllvdvolt | 1.3.6.1.4.1.40865.1.57 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory LLVD the voltage which the power system unload get in mV. | |||||||||||||
| Slblvdvolt | 1.3.6.1.4.1.40865.1.58 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory BLVD--the protected voltage which the power system unload the battery get in mV. | |||||||||||||
| Schargecurrlimit | 1.3.6.1.4.1.40865.1.59 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the limit current of the battery in EQ charge mode. get in A. | |||||||||||||
| Seqchargeperiod | 1.3.6.1.4.1.40865.1.60 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the period of the next EQ charge time. get in day. | |||||||||||||
| Sbattovertemp | 1.3.6.1.4.1.40865.1.61 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the battery temperature which make alarm. get in Celsius degree. For example, 40000 is 40 Celsius degree | |||||||||||||
| Sbattstdcapacity | 1.3.6.1.4.1.40865.1.62 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the capacity of the battery in the power system. get in Ah. | |||||||||||||
| Seqprotecttime | 1.3.6.1.4.1.40865.1.63 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the in all time of the battery in EQ charge mode. get in minute. | |||||||||||||
| Sstableeqtime | 1.3.6.1.4.1.40865.1.64 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the total time of the stable current in EQ charge mode. get in minute. | |||||||||||||
| Sturneqcurrent | 1.3.6.1.4.1.40865.1.65 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the charge current in EQ charge mode. get in (A). | |||||||||||||
| Sturneqcaprate | 1.3.6.1.4.1.40865.1.66 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the percent of the battery capacity which the battery charge mode turn from the float charge into the EQ charge mode . get in(%),for example,800 is 80% | |||||||||||||
| Schargeefficient | 1.3.6.1.4.1.40865.1.67 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the efficient of battery charge .get in(%),for example,860 is 86% | |||||||||||||
| Sautoecenable | 1.3.6.1.4.1.40865.1.68 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory the battery control mode,auto EC enable flag. autoecenable(0)--disable the battery in auto EC mode. autoecenable(1)--enable the battery in auto EC mode. | |||||||||||||