LINKSYS-TRUNK-MIB
LinksysThe private MIB module definition for trunk support in Linksys devices.
snmptranslate -m LINKSYS-TRUNK-MIB -Tpsnmpwalk -v2c -c <community> -m LINKSYS-TRUNK-MIB <host> 1.3.6.1.4.1.3955.1000.201.65Imports
| IEEE8023-LAG-MIB | dot3adAggIndex, dot3adAggPortIndex |
|---|---|
| LINKSYS-MIB | rnd |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlDot3adAgg | 1.3.6.1.4.1.3955.1000.201.65 | |||
identity The private MIB module definition for trunk support in Linksys devices. | ||||
| SrlDot3adAggMibVersion | 1.3.6.1.4.1.3955.1000.201.65.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current MIB's version, the current version is 1. | ||||
| TrlDot3adAggBalanceTable | 1.3.6.1.4.1.3955.1000.201.65.2 | NA | ||
table · not-accessible · current An entry of this table specifies a balancing criterion used for the corresponding dot3adAggIndex. | ||||
| RrlDot3adAggBalanceEntry | 1.3.6.1.4.1.3955.1000.201.65.2.1 | NA | ||
row · not-accessible · current A list of information for each dot3adAggIndex. | ||||
| CrlDot3adAggBalanceForwardType | 1.3.6.1.4.1.3955.1000.201.65.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current A Forwarding type: Bridging or Routing.
| ||||
| CrlDot3adAggBalanceLayer | 1.3.6.1.4.1.3955.1000.201.65.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current A Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3. | ||||
| CrlDot3adAggBalanceUsedAddresses | 1.3.6.1.4.1.3955.1000.201.65.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).
| ||||
| CrlDot3adAggBalanceBroadcastType | 1.3.6.1.4.1.3955.1000.201.65.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies a balancing criterion used for L2 broadcast and unknown
frames:
common:
a link allocated for broadcast and unknown frames is used
for unicast frames too
dedicated:
a link allocated for broadcast and unknown frames is not used
for unicast frames
| ||||
| SrlDot3adAggNumOfTrunks | 1.3.6.1.4.1.3955.1000.201.65.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The number of trunks supported by the device. | ||||
| SrlDot3adAggMaxPortsInTrunks | 1.3.6.1.4.1.3955.1000.201.65.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximun number of ports in a trunk. | ||||
| SrlDot3adAggTrunkCreationSupport | 1.3.6.1.4.1.3955.1000.201.65.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies if there is support to rldot3adAggCreationTable, and the type of the support: supportedTrunkOrLacp - ports that are members in some trunk are belongs to it by manual configuration or by lacp, but not togther. notSupported - there is not support to rldot3adAggCreationTable.
| ||||
| TrlDot3adAggCreationTable | 1.3.6.1.4.1.3955.1000.201.65.6 | NA | ||
table · not-accessible · current An entry of this table is for creation of an aggregator for the corresponding dot3adAggIndex, when the value of the rlDot3adAggCreationSupport is diffrent from notSupported. | ||||
| RrlDot3adAggCreationEntry | 1.3.6.1.4.1.3955.1000.201.65.6.1 | NA | ||
| CrlDot3adAggCreationTrunk | 1.3.6.1.4.1.3955.1000.201.65.6.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The aggregator can aggregate ports in manual configuration. | ||||
| CrlDot3adAggCreationLacp | 1.3.6.1.4.1.3955.1000.201.65.6.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current The aggregator can aggregate ports by lacp. | ||||
| SrlDot3adAggLoadBalancingPerTrunk | 1.3.6.1.4.1.3955.1000.201.65.7 | TruthValue | RO | |
scalar · TruthValue · read-only · current Specifies if load balancing is defined per trunk or per device. | ||||
| TrlDot3adAggPortLacpTable | 1.3.6.1.4.1.3955.1000.201.65.8 | NA | ||
table · not-accessible · current An entry of this table specifies lacp protocol state and statistics for the corresponding dot3adAggPortIndex. | ||||
| RrlDot3adAggPortLacpEntry | 1.3.6.1.4.1.3955.1000.201.65.8.1 | NA | ||
row · not-accessible · current A list of information for each dot3adAggPortIndex.
| ||||
| CrlDot3adAggPortLacpPdusRx | 1.3.6.1.4.1.3955.1000.201.65.8.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The number of valid LACPDUs received on this Aggregation Port. This value is read-only. | ||||
| CrlDot3adAggPortLacpPDUsTx | 1.3.6.1.4.1.3955.1000.201.65.8.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The number of LACPDUs transmitted on this Aggregation Port. This value is read-only. | ||||
| CrlDot3adAggPortLacpRxState | 1.3.6.1.4.1.3955.1000.201.65.8.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'portDisabled' if the Receive state machine is in the PORT_DISABLED state, or 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state. This value is read-only.
| ||||
| CrlDot3adAggPortLacpMuxState | 1.3.6.1.4.1.3955.1000.201.65.8.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, 'collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, 'distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and 'collecting_ distributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
| ||||
| CrlDot3adAggPortLacpPeriodicState | 1.3.6.1.4.1.3955.1000.201.65.8.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state machine for the Aggregation Port is in the SLOW_PERIODIC state, or 'periodicTx' if the Periodic state machine for the Aggregation Port is in the PERIODIC_TX state. This value is read-only.
| ||||
| CrlDot3adAggPortLacpSelected | 1.3.6.1.4.1.3955.1000.201.65.8.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the Aggregation Port is set to SELECTED, or 'waiting' if the Selected variable for the Aggregation Port is set to WAITING. This value is read-only.
| ||||
| CrlDot3adAggPortLacpReady | 1.3.6.1.4.1.3955.1000.201.65.8.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current A read-only Boolean value indicating whether the
Aggregation Port is in the WAITING state in the Mux state machine
and its wait_while_timer has expired ('TRUE').
otherwise, its valus is 'FALSE'. | ||||
| CrlDot3adAggPortLacpPortMoved | 1.3.6.1.4.1.3955.1000.201.65.8.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current A read-only Boolean value indicating whether the
Partner_Oper_System or Partner_Oper_Port_Number in use by the
Aggregation Port has been changed in an incoming LACPDU ('TRUE').
otherwise, its valus is 'FALSE'. | ||||
| CrlDot3adAggPortLacpNNT | 1.3.6.1.4.1.3955.1000.201.65.8.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current A read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be reminded of the old information. otherwise, its valus is 'FALSE'. | ||||
| CrlDot3adAggPortLacpPeriodicTxTimer | 1.3.6.1.4.1.3955.1000.201.65.8.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only. | ||||
| CrlDot3adAggPortLacpCurrentWhileTimer | 1.3.6.1.4.1.3955.1000.201.65.8.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The amount of time in seconds remaining before the Current While timer will expire. This value is read-only. | ||||
| CrlDot3adAggPortLacpWaitWhileTimer | 1.3.6.1.4.1.3955.1000.201.65.8.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The amount of time in seconds remaining before the Wait While timer will expire. This value is read-only. | ||||
| SrlDot3adAggLacpMembershipRestrictionsSupport | 1.3.6.1.4.1.3955.1000.201.65.9 | TruthValue | RW | |
scalar · TruthValue · read-write · current Specifies if there is support to rlDot3adAggLacpMembershipRestrictionsTable. | ||||
| TrlDot3adAggLacpMembershipRestrictionsTable | 1.3.6.1.4.1.3955.1000.201.65.10 | NA | ||
table · not-accessible · current An entry of this table specifies membership restrictions for ports that lacp is enbaled on them, and try to attach to the corresponding dot3adAggIndex. | ||||
| RrlDot3adAggLacpMembershipRestrictionsEntry | 1.3.6.1.4.1.3955.1000.201.65.10.1 | NA | ||
| CrlDot3adAggLacpMembershipRestrictionsPartnerAdminKey | 1.3.6.1.4.1.3955.1000.201.65.10.1.1 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. | ||||
| CrlDot3adAggLacpMembershipRestrictionsSpeedAdminMode | 1.3.6.1.4.1.3955.1000.201.65.10.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set. | ||||
| CrlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId | 1.3.6.1.4.1.3955.1000.201.65.10.1.3 | PhysAddress | RW | |
column · PhysAddress · read-write · current This variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been set. | ||||
| CrlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority | 1.3.6.1.4.1.3955.1000.201.65.10.1.4 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current This variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. | ||||
| CrlDot3adAggLacpMembershipRestrictionsIndividualAggregator | 1.3.6.1.4.1.3955.1000.201.65.10.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current This variable specifies if the lacp aggregator represents an
Aggregate ('FALSE') or an Individual link ('TRUE'). | ||||