LINKSYS-MODEL-MIB
Linksyssnmptranslate -m LINKSYS-MODEL-MIB -Tpsnmpwalk -v2c -c <community> -m LINKSYS-MODEL-MIB <host> 1.3.6.1Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ninternet | 1.3.6.1 | |||
| Ndirectory | 1.3.6.1.1 | |||
| Nmgmt | 1.3.6.1.2 | |||
| Nexperimental | 1.3.6.1.3 | |||
| Nprivate | 1.3.6.1.4 | |||
| Nenterprises | 1.3.6.1.4.1 | |||
| Nlinksys | 1.3.6.1.4.1.3955 | |||
| Ncommon | 1.3.6.1.4.1.3955.1 | |||
| ScommonFirmwareVer | 1.3.6.1.4.1.3955.1.1 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The firmware version of this managed node. | ||||
| ScommonMIBfileVer | 1.3.6.1.4.1.3955.1.2 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Defines the current version of Linksys MIB definition. Initially the version number is 1.00.00. | ||||
| ScommonDevType | 1.3.6.1.4.1.3955.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The hardware type of this managed node.
| ||||
| ScommonModelId | 1.3.6.1.4.1.3955.1.4 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The hardware model ID of this managed node. | ||||
| TcommonTable | 1.3.6.1.4.1.3955.1.5 | NA | mandatory | |
table · not-accessible · mandatory Table of basic information that can be used to identify this managed node. | ||||
| RcommonEntry | 1.3.6.1.4.1.3955.1.5.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table, containing read only identification information.
| ||||
| CcommonIfIndex | 1.3.6.1.4.1.3955.1.5.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | ||||
| CcommonFunIndex | 1.3.6.1.4.1.3955.1.5.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of function, distinguished according to hardware model of this managed node.
| ||||
| CcommonNote | 1.3.6.1.4.1.3955.1.5.1.3 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Notification for the specified function. | ||||
| Nmanagement | 1.3.6.1.4.1.3955.2 | |||
| NbasicMgt | 1.3.6.1.4.1.3955.2.1 | |||
| SmgtSystemReset | 1.3.6.1.4.1.3955.2.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates whether to set the managed node to do warm start or cold start. Definition refers to RFC1215.
| ||||
| SmgtFactoryReset | 1.3.6.1.4.1.3955.2.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates whether to set the managed node to restore factory default settings or not.
| ||||
| SmgtAdministrator | 1.3.6.1.4.1.3955.2.1.3 | DisplayString (SIZE (0..64)) | RW | mandatory |
scalar · DisplayString (SIZE (0..64)) · read-write · mandatory The authorized password used to access the system. | ||||
| SmgtAdminUsername | 1.3.6.1.4.1.3955.2.1.4 | DisplayString (SIZE (0..64)) | RW | mandatory |
scalar · DisplayString (SIZE (0..64)) · read-write · mandatory The user name used to access the system. | ||||
| SmgtSaveConfiguration | 1.3.6.1.4.1.3955.2.1.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates whether to store Enterprise MIB objects value in non-volatile RAM and reinitializing the managed node.
| ||||
| SmgtHostName | 1.3.6.1.4.1.3955.2.1.6 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory Supply a host name for the router. Some ISPs require this name as identification. Leaving this field will work. | ||||
| SmgtDomainName | 1.3.6.1.4.1.3955.2.1.7 | DisplayString (SIZE (0..64)) | RW | mandatory |
scalar · DisplayString (SIZE (0..64)) · read-write · mandatory Supply a domain name for the router. Some ISPs require this name as identification. Leaving this field will work. | ||||
| SmgtNodeNetAddress | 1.3.6.1.4.1.3955.2.1.8 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The IP address to which identifies this managed node from internal networking. | ||||
| SmgtNodeSubnetMask | 1.3.6.1.4.1.3955.2.1.9 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The subnet mask associated with the IP address of this system. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | ||||
| SmgtDhcpStatus | 1.3.6.1.4.1.3955.2.1.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates whether to configure the managed node to automatically assign IP address to each of LAN clients.
| ||||
| SmgtDhcpStartNetAddr | 1.3.6.1.4.1.3955.2.1.11 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory Specifies a start IP address to which DHCP will issue to | ||||
| SmgtDhcpNumberUsers | 1.3.6.1.4.1.3955.2.1.12 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The number of clients to which plan on networking to this managed node. | ||||
| TmgtCommunityTable | 1.3.6.1.4.1.3955.2.1.13 | NA | mandatory | |
table · not-accessible · mandatory Table of access community. | ||||
| RmgtCommunityEntry | 1.3.6.1.4.1.3955.2.1.13.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table, containing read/write community names.
| ||||
| CmgtCommunityIndex | 1.3.6.1.4.1.3955.2.1.13.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each community. | ||||
| CmgtCommunityName | 1.3.6.1.4.1.3955.2.1.13.1.2 | DisplayString (SIZE (0..32)) | RW | mandatory |
column · DisplayString (SIZE (0..32)) · read-write · mandatory The name used to manage the SNMP protocol entity. | ||||
| CmgtCommunityType | 1.3.6.1.4.1.3955.2.1.13.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the privilege for this community name.
| ||||
| NadvanceMgt | 1.3.6.1.4.1.3955.2.2 | |||
| SadvMgtRefreshMIB | 1.3.6.1.4.1.3955.2.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Refresh Enterprise MIB object data from RAM NV.
| ||||
| SadvMgtWanReqBlockStatus | 1.3.6.1.4.1.3955.2.2.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Set to enable(1) will prevent local network from being 'pinged' or detected and also can reinforce local network security by hiding the network port.
| ||||
| SadvMgtIpSecPassThroughStatus | 1.3.6.1.4.1.3955.2.2.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies to enable(1) or disable(0) IPSec Pass Through ability.
| ||||
| SadvMgtPptpPassThroughStatus | 1.3.6.1.4.1.3955.2.2.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Point-to-Point Tunneling Protocol is the method used to enable VPN tunnels. This object can be used to specify the PPTP pass through ability.
| ||||
| SadvMgtL2TPPassThroughStatus | 1.3.6.1.4.1.3955.2.2.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies to enable(1) or disable(0) Layer Two Tunneling Protocol Pass Through ability.
| ||||
| SadvMgtRemoteMgtStatus | 1.3.6.1.4.1.3955.2.2.6 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether allow this managed node to be managed from a remote location.
| ||||
| SadvMgtRemoteUpgradeStatus | 1.3.6.1.4.1.3955.2.2.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether allow the managed node's firmware to be upgraded from a remote location.
| ||||
| SadvMgtAccessLogStatus | 1.3.6.1.4.1.3955.2.2.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether to send access log messages to specific management entities.
| ||||
| SadvMgtMulticastPassStatus | 1.3.6.1.4.1.3955.2.2.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether allow for multiple transmissions to specific receptions at the same time.
| ||||
| SadvMgtMtuStatus | 1.3.6.1.4.1.3955.2.2.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates whether to use specific MTU size, refer to advMgtMtuSize object, as the largest packet size.
| ||||
| SadvMgtMtuSize | 1.3.6.1.4.1.3955.2.2.11 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the largest packet size permitted for network transmission. | ||||
| SadvMgtLocalTimeZone | 1.3.6.1.4.1.3955.2.2.12 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates local time zone for this managed node. | ||||
| TroutingMethodTable | 1.3.6.1.4.1.3955.2.2.13 | NA | mandatory | |
table · not-accessible · mandatory The table of dynamic routing settings which can automatically adjust to physical changes in the network's layout. | ||||
| RroutingMethodEntry | 1.3.6.1.4.1.3955.2.2.13.1 | NA | mandatory | |
row · not-accessible · mandatory The protocol information for one of this entity's routing method.
| ||||
| CroutingMethodIndex | 1.3.6.1.4.1.3955.2.2.13.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each routing method. | ||||
| CdynamicRoutingTX | 1.3.6.1.4.1.3955.2.2.13.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the protocol to which transmit data on the network.
| ||||
| CdynamicRoutingRX | 1.3.6.1.4.1.3955.2.2.13.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the protocol to which receive data on the network.
| ||||
| TdmzTable | 1.3.6.1.4.1.3955.2.2.14 | NA | mandatory | |
table · not-accessible · mandatory The table of DMZ settings which allow one local user to be exposed to the Internet to use a special-purpose service. | ||||
| RdmzEntry | 1.3.6.1.4.1.3955.2.2.14.1 | NA | mandatory | |
| CdmzIndex | 1.3.6.1.4.1.3955.2.2.14.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each DMZ setting. | ||||
| CdmzRemoteIPAddress | 1.3.6.1.4.1.3955.2.2.14.1.2 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Specifies the remote host IP address to which maps to the local host specified by dmzHostIPAddress object. | ||||
| CdmzHostIPAddress | 1.3.6.1.4.1.3955.2.2.14.1.3 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Specifies the local host IP address which will be exposed to the Internet. | ||||
| TstaticRoutingTable | 1.3.6.1.4.1.3955.2.2.15 | NA | mandatory | |
table · not-accessible · mandatory The table of static routing methods which specifies pre-determined pathway that network information must travel to reach a specific host or network. | ||||
| RstaticRoutingEntry | 1.3.6.1.4.1.3955.2.2.15.1 | NA | mandatory | |
row · not-accessible · mandatory The configuration information for one of static routing.
| ||||
| CstaticRoutingIndex | 1.3.6.1.4.1.3955.2.2.15.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each static routing method. | ||||
| CdestinationNetAddress | 1.3.6.1.4.1.3955.2.2.15.1.2 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address of the remote network or host to which will be assigned a static route. | ||||
| CroutingSubnetMask | 1.3.6.1.4.1.3955.2.2.15.1.3 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Determines which portion of an IP address is the network portion, and which portion is the host portion. | ||||
| CroutingDefaultGateway | 1.3.6.1.4.1.3955.2.2.15.1.4 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Specifies the IP address of the gateway device that allows for contact between the managed node and the remote network or host. | ||||
| CroutingHopCount | 1.3.6.1.4.1.3955.2.2.15.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the maximun number of hops that packets to the destination specified by this route entry should be forwarded. | ||||
| CroutingInterface | 1.3.6.1.4.1.3955.2.2.15.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the physical interface to which will apply this routing configuration.
| ||||
| CnFlagStatus | 1.3.6.1.4.1.3955.2.2.15.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the operation status for this routing entry.
| ||||
| TtrapManagerTable | 1.3.6.1.4.1.3955.2.2.16 | NA | mandatory | |
table · not-accessible · mandatory Table of SNMP Trap message receivers. | ||||
| RtrapManagerEntry | 1.3.6.1.4.1.3955.2.2.16.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table contains the host IP address which will receive trap messages.
| ||||
| CtrapManagerIndex | 1.3.6.1.4.1.3955.2.2.16.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each trap receiver. | ||||
| CtrapMgrNetAddress | 1.3.6.1.4.1.3955.2.2.16.1.2 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address to which will receive the Log message sent via trap protocol. | ||||
| SadvMgtUPnPStatus | 1.3.6.1.4.1.3955.2.2.17 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether allow Windows XP to automatically confiure the managed node for various Internet applications.
| ||||
| SadvMgtUPnPControl | 1.3.6.1.4.1.3955.2.2.18 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether allow Windows XP to read and write the UPnP Forwarding of managed node using UPnP.
| ||||
| SadvMgtUPnPConnectControl | 1.3.6.1.4.1.3955.2.2.19 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether allow Windows XP to read and write the UPnP WAN Connection of managed node using UPnP.
| ||||
| NwanMgt | 1.3.6.1.4.1.3955.2.3 | |||
| TwanConnectionTable | 1.3.6.1.4.1.3955.2.3.1 | NA | mandatory | |
table · not-accessible · mandatory Table of WAN connection management. | ||||
| RwanConnectionEntry | 1.3.6.1.4.1.3955.2.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table specifies the connection configuration for WAN interface.
| ||||
| CwanIndex | 1.3.6.1.4.1.3955.2.3.1.1.1 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated An unique value for each WAN connection configuration. | ||||
| CwanIfIndex | 1.3.6.1.4.1.3955.2.3.1.1.2 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | ||||
| CwanConnectionType | 1.3.6.1.4.1.3955.2.3.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the protocol to which adopted by this WAN connection.
| ||||
| CwanNetAddress | 1.3.6.1.4.1.3955.2.3.1.1.4 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address that this managed node has, when seen from the external WAN, or the Internet. | ||||
| CwanPhysicalAddr | 1.3.6.1.4.1.3955.2.3.1.1.5 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory The physical address that this managed node has, when seen from the external WAN, or the Internet. | ||||
| CwanSubnetMask | 1.3.6.1.4.1.3955.2.3.1.1.6 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The subnet mask seen by external users on the Internet. | ||||
| CwanDefaultGateway | 1.3.6.1.4.1.3955.2.3.1.1.7 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address of remote host to which in respect to the forwarding of datagrams received by, but not addressed to, this managed node. | ||||
| CwanDHCPStatus | 1.3.6.1.4.1.3955.2.3.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates to release or renew the IP address of this managed node which seen from the external WAN, or the Internet.
| ||||
| CwanLoginStatus | 1.3.6.1.4.1.3955.2.3.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies to cut the connection to ISP, set to disable(0), or to build up a PPPoE or RAS connection.
| ||||
| CwanLoginUserName | 1.3.6.1.4.1.3955.2.3.1.1.10 | DisplayString (SIZE (0..64)) | RW | mandatory |
column · DisplayString (SIZE (0..64)) · read-write · mandatory The authorized user name used to access the ISP. | ||||
| CwanLoginPassword | 1.3.6.1.4.1.3955.2.3.1.1.11 | DisplayString (SIZE (0..64)) | RW | mandatory |
column · DisplayString (SIZE (0..64)) · read-write · mandatory The authorized password used to access the ISP. | ||||
| CwanRasPlan | 1.3.6.1.4.1.3955.2.3.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the type of Remote Access Service plan used to connect with the ISP.
| ||||
| CwanWorkingMode | 1.3.6.1.4.1.3955.2.3.1.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the working mode for this managed node. Gateway mode should be used if this node is hosting local network's connection to the Internet. Router mode should be used if this node exists on a network with other routers.
| ||||
| CwanConnectedState | 1.3.6.1.4.1.3955.2.3.1.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the state to keepAlive(0) will keep the PPPoE-enabled Internet access connected indefinitely, even when it sits idle. Otherwise the connection to the ISP will be cutted after a preiod of time specified in wanConnectedIdleTime object.
| ||||
| CwanConnectedIdleTime | 1.3.6.1.4.1.3955.2.3.1.1.15 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the number of minutes that want to have elapsed before Internet access disconnects. A zero value indicates to remain the Internet connection on at all times. | ||||
| CwanConnectedRedialPeriod | 1.3.6.1.4.1.3955.2.3.1.1.16 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory PPPoE retry to dial to ISP, due to ISP equipment bug in HK | ||||
| TwanDnsNetAddressTable | 1.3.6.1.4.1.3955.2.3.2 | NA | mandatory | |
table · not-accessible · mandatory Table of DNS Server IP addresses. | ||||
| RwanDnsNetAddressEntry | 1.3.6.1.4.1.3955.2.3.2.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table contains one DNS server IP address. | ||||
| CwanDnsNetAddressIndex | 1.3.6.1.4.1.3955.2.3.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each DNS server. | ||||
| CwanDnsIfIndex | 1.3.6.1.4.1.3955.2.3.2.1.2 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index isthe same interface as identified by the same value of ifIndex. | ||||
| CwanDnsNetAddress | 1.3.6.1.4.1.3955.2.3.2.1.3 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Specifies the IP address of DNS server to which will translate domain or website names into Internet addresses or URLs. | ||||
| NvpnMgt | 1.3.6.1.4.1.3955.2.4 | |||
| TvpnIpsecTable | 1.3.6.1.4.1.3955.2.4.1 | NA | mandatory | |
table · not-accessible · mandatory Table of VPN Tunnel configuration. | ||||
| RvpnIpsecEntry | 1.3.6.1.4.1.3955.2.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table contains configuration for each tunnel.
| ||||
| CvpnTunnelIndex | 1.3.6.1.4.1.3955.2.4.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each independent tunnel. | ||||
| CvpnTunnelState | 1.3.6.1.4.1.3955.2.4.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Status of selected tunnel, disable or enable.
| ||||
| CvpnTunnelName | 1.3.6.1.4.1.3955.2.4.1.1.3 | DisplayString (SIZE (0..15)) | RW | mandatory |
column · DisplayString (SIZE (0..15)) · read-write · mandatory Name of selected tunnel. | ||||
| CvpnLocalIdType | 1.3.6.1.4.1.3955.2.4.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Select the local LAN user(s) behind the router that can use this VPN tunnel. This may be a single IP address, a Sub-network or a range of addresses. Notice that the Local Secure Group must match the other router's Remote Secure Group.
| ||||
| CvpnLocalIp | 1.3.6.1.4.1.3955.2.4.1.1.5 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address if vpnLocalIdType is ip(0). | ||||
| CvpnLocalSubnet | 1.3.6.1.4.1.3955.2.4.1.1.6 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The Sub-network IP if vpnLocalIdType is subnet(1). | ||||
| CvpnLocalSubnetMask | 1.3.6.1.4.1.3955.2.4.1.1.7 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The Sub-network mask if vpnLocalIdType is subnet(1). | ||||
| CvpnLocalRangeBeg | 1.3.6.1.4.1.3955.2.4.1.1.8 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The start address of IP range if vpnLocalIdType is range(2). | ||||
| CvpnLocalRangeEnd | 1.3.6.1.4.1.3955.2.4.1.1.9 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The end address of IP range if vpnLocalIdType is range(2). | ||||
| CvpnRemoteIdType | 1.3.6.1.4.1.3955.2.4.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Select the remote LAN user(s) behind the remote gateway can use this VPN tunnel. This may be a single IP address, a Sub-network, range of addresses or any addresses. If [Any] is set, the router acts as responder and accepts request from any remote user. In this case, the pre-shared key of this tunnel should be set as a different string from other tunnels'. Notice that Remote Secure Group must match the other router's Local Secure Group.
| ||||
| CvpnRemoteIp | 1.3.6.1.4.1.3955.2.4.1.1.11 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address if vpnRemoteIdType is ip(0). | ||||
| CvpnRemoteSubnet | 1.3.6.1.4.1.3955.2.4.1.1.12 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The Sub-network IP if vpnRemoteIdType is subnet(1). | ||||
| CvpnRemoteSubnetMask | 1.3.6.1.4.1.3955.2.4.1.1.13 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The Sub-network mask if vpnRemoteIdType is subnet(1). | ||||
| CvpnRemoteRangeBeg | 1.3.6.1.4.1.3955.2.4.1.1.14 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The start address of IP range if vpnRemoteIdType is range(2). | ||||
| CvpnRemoteRangeEnd | 1.3.6.1.4.1.3955.2.4.1.1.15 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The end address of IP range if vpnRemoteIdType is range(2). | ||||
| CvpnRemoteSecurityGateway | 1.3.6.1.4.1.3955.2.4.1.1.16 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address in this field must match the public IP address (i.e. WAN IP Address) of the remote gateway at the other end of this tunnel. If the remote gateway has a dynamic IP address, select [Any] in this field. In this case, the pre-shared key of this tunnel should be set as a different string from other tunnels'. Another type is [FQDN]. It allows you to enter a fully-qualified domain name of the remote gateway. | ||||
| CvpnEspEncrypt | 1.3.6.1.4.1.3955.2.4.1.1.17 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Encryption method determines the length of the key used to encrypt/decrypt ESP packets. Either DES or 3DES may be selected. Notice that both sides must use the same Encryption method.
| ||||
| CvpnEspAuth | 1.3.6.1.4.1.3955.2.4.1.1.18 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Authentication, determines a method to authenticate the ESP packets. Either MD5 or SHA may be selected. Notice that both sides must use the same Authentication method.
| ||||
| CvpnKeyMethod | 1.3.6.1.4.1.3955.2.4.1.1.19 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The router supports both automatic and manual key management. When choosing automatic key management, IKE(Internet Key Exchange) protocols are used to negotiate key material for SA. If manual key management is selected, no key negotiation is needed. Basically, manual key management is used in small static environments or for troubleshooting purpose. Notice that both sides must use the same Key Management method.
| ||||
| CvpnIsakmpPfs | 1.3.6.1.4.1.3955.2.4.1.1.20 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory If PFS is enabled, IKE Phase 2 negotiation will generate a new key material for IP traffic encryption and authentication. Note: that both sides must have this selected.
| ||||
| CvpnIsakmpPreSharedKey | 1.3.6.1.4.1.3955.2.4.1.1.21 | DisplayString (SIZE (0..23)) | RO | mandatory |
column · DisplayString (SIZE (0..23)) · read-only · mandatory IKE uses the Pre-shared Key field to authenticate the remote IKE peer. Both character and hexadecimal value are acceptable in this field. e.g. [My-@123] or [0x4d795f40313233] Note: that both sides must use the same Pre-shared Key. | ||||
| CvpnManualEncryptKey | 1.3.6.1.4.1.3955.2.4.1.1.22 | DisplayString (SIZE (0..23)) | RO | mandatory |
column · DisplayString (SIZE (0..23)) · read-only · mandatory This field specifies a key used to encrypt and decrypt IP traffic. Both character and hexadecimal value are acceptable in this field. Note: that both sides must use the same Encryption Key. | ||||
| CvpnManualAuthKey | 1.3.6.1.4.1.3955.2.4.1.1.23 | DisplayString (SIZE (0..19)) | RO | mandatory |
column · DisplayString (SIZE (0..19)) · read-only · mandatory This field specifies a key used to authenticate IP traffic.Both character and hexadecimal value are acceptable in this field. Note: that both sides must use the same Authentication Key. | ||||
| CvpnManualInboundSpi | 1.3.6.1.4.1.3955.2.4.1.1.24 | DisplayString (SIZE (0..9)) | RW | mandatory |
column · DisplayString (SIZE (0..9)) · read-write · mandatory The SPI(Security Parameter Index) is carried in the ESP header. This enables the receiver to select the SA, under which a packet should be processed. The SPI is a 32-bit value. Both decimal and hexadecimal values are acceptable. e.g. [987654321] or [0x3ade68b1]. Each tunnel must have unique an Inbound SPI and Outbound SPI. No two tunnels share the same SPI. Notice that Inbound SPI must match the other router's Outbound SPI, and vice versa. | ||||
| CvpnManualOutboundSpi | 1.3.6.1.4.1.3955.2.4.1.1.25 | DisplayString (SIZE (0..9)) | RW | mandatory |
column · DisplayString (SIZE (0..9)) · read-write · mandatory The SPI(Security Parameter Index) is carried in the ESP header. This enables the receiver to select the SA, under which a packet should be processed. The SPI is a 32-bit value. Both decimal and hexadecimal values are acceptable. e.g. [987654321] or [0x3ade68b1]. Each tunnel must have unique an Inbound SPI and Outbound SPI. No two tunnels share the same SPI. Notice that Inbound SPI must match the other router's Outbound SPI, and vice versa. | ||||
| CvpnTunnelStatus | 1.3.6.1.4.1.3955.2.4.1.1.26 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the connection status of the selected tunnel. The state is either connected(0) or disconnected(1).
| ||||
| NfirewallMgt | 1.3.6.1.4.1.3955.2.5 | |||
| SfwProtection | 1.3.6.1.4.1.3955.2.5.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Set to disable or enable the firewall function utilized on this managed node.
| ||||
| NwirelessMgt | 1.3.6.1.4.1.3955.2.6 | |||
| NwirelessCommon | 1.3.6.1.4.1.3955.2.6.1 | |||
| SstationMacFilter | 1.3.6.1.4.1.3955.2.6.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Set to disable(0) or enable(1) the wireless station physical address filter.
| ||||
| SapClientModeEnable | 1.3.6.1.4.1.3955.2.6.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get enable or disable AP client mode
| ||||
| SapClientMacNum | 1.3.6.1.4.1.3955.2.6.1.3 | INTEGER (1..20) | RW | mandatory |
scalar · INTEGER (1..20) · read-write · mandatory set/get the numbers of AP Client MAC address list | ||||
| TapClientMacTable | 1.3.6.1.4.1.3955.2.6.1.4 | NA | mandatory | |
table · not-accessible · mandatory set/get the MAC address list of AP Client | ||||
| RapClientMacEntry | 1.3.6.1.4.1.3955.2.6.1.4.1 | NA | mandatory | |
| CapClientMacIndex | 1.3.6.1.4.1.3955.2.6.1.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A index value for each MAC address. | ||||
| CapClientMacAddress | 1.3.6.1.4.1.3955.2.6.1.4.1.2 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory The MAC address. | ||||
| SapBridgeModeEnable | 1.3.6.1.4.1.3955.2.6.1.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get enable or disable Bridge mode
| ||||
| SapBridgeMacNum | 1.3.6.1.4.1.3955.2.6.1.6 | INTEGER (1..20) | RW | mandatory |
scalar · INTEGER (1..20) · read-write · mandatory set/get the numbers of Bridge MAC address list | ||||
| TapBridgeMacTable | 1.3.6.1.4.1.3955.2.6.1.7 | NA | mandatory | |
table · not-accessible · mandatory set/get the MAC address list of Bridge | ||||
| RapBridgeMacEntry | 1.3.6.1.4.1.3955.2.6.1.7.1 | NA | mandatory | |
| CapBridgeMacIndex | 1.3.6.1.4.1.3955.2.6.1.7.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A index value for each MAC address. | ||||
| CapBridgeMacAddress | 1.3.6.1.4.1.3955.2.6.1.7.1.2 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory The MAC address. | ||||
| SapRepeatorModeEnable | 1.3.6.1.4.1.3955.2.6.1.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get enable or disable repeater mode
| ||||
| SapRepeatorMacNum | 1.3.6.1.4.1.3955.2.6.1.9 | INTEGER (1..20) | RW | mandatory |
scalar · INTEGER (1..20) · read-write · mandatory set/get the numbers of repeater MAC address list | ||||
| TapRepeatorMacTable | 1.3.6.1.4.1.3955.2.6.1.10 | NA | mandatory | |
table · not-accessible · mandatory set/get the MAC address list of repeater | ||||
| RapRepeatorMacEntry | 1.3.6.1.4.1.3955.2.6.1.10.1 | NA | mandatory | |
| CapRepeatorMacIndex | 1.3.6.1.4.1.3955.2.6.1.10.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A index value for each MAC address. | ||||
| CapRepeatorMacAddress | 1.3.6.1.4.1.3955.2.6.1.10.1.2 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory The MAC address. | ||||
| Nieee80211b | 1.3.6.1.4.1.3955.2.6.2 | |||
| Sieee80211bBroadcastSSID | 1.3.6.1.4.1.3955.2.6.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The attribute is only valid for Access Point and the master of IBSS. When the attribute is enable, the SSID field in beacon frames is blank, also the device will not response the Probe Request with unspecified SSID.
| ||||
| Sieee80211bSSIDString | 1.3.6.1.4.1.3955.2.6.2.2 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory When in read access, this attribute reflects the Service Set ID of the current wireless connection. When in write access, it is the desired Service Set ID. | ||||
| Sieee80211bChannel | 1.3.6.1.4.1.3955.2.6.2.3 | INTEGER (1..14) | RW | mandatory |
scalar · INTEGER (1..14) · read-write · mandatory When in read access, this attribute reflects the channel number of the current wireless connection. When in write access, it is the desired channel to connect. | ||||
| Sieee80211bWep | 1.3.6.1.4.1.3955.2.6.2.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specify the WEP status of device. If the attribute is set as enable, the WEP mechanism is used for transmitting data frames.
| ||||
| Sieee80211bWepAuthMethod | 1.3.6.1.4.1.3955.2.6.2.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specify the authentication algorithms supported by the station or AP.
| ||||
| Sieee80211bWepBits | 1.3.6.1.4.1.3955.2.6.2.6 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory When WEP is enabled, this attribute specifies whether 64-bit or 128-bit encryption/decryption algorithm is used.
| ||||
| Sieee80211bDefaultKey | 1.3.6.1.4.1.3955.2.6.2.7 | INTEGER (1..4) | RW | mandatory |
scalar · INTEGER (1..4) · read-write · mandatory The index of default WEP encryption key for transmission. It can be 1 to 4. | ||||
| Sieee80211bWep64bitkey1 | 1.3.6.1.4.1.3955.2.6.2.8 | OCTET STRING (SIZE (0..10)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..10)) · read-write · mandatory The WEP key #1 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bWep64bitkey2 | 1.3.6.1.4.1.3955.2.6.2.9 | OCTET STRING (SIZE (0..10)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..10)) · read-write · mandatory The WEP key #2 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bWep64bitkey3 | 1.3.6.1.4.1.3955.2.6.2.10 | OCTET STRING (SIZE (0..10)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..10)) · read-write · mandatory The WEP key #3 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bWep64bitkey4 | 1.3.6.1.4.1.3955.2.6.2.11 | OCTET STRING (SIZE (0..10)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..10)) · read-write · mandatory The WEP key #4 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bWep128bitkey1 | 1.3.6.1.4.1.3955.2.6.2.12 | OCTET STRING (SIZE (0..26)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..26)) · read-write · mandatory The WEP key #1 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bWep128bitkey2 | 1.3.6.1.4.1.3955.2.6.2.13 | OCTET STRING (SIZE (0..26)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..26)) · read-write · mandatory The WEP key #2 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bWep128bitkey3 | 1.3.6.1.4.1.3955.2.6.2.14 | OCTET STRING (SIZE (0..26)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..26)) · read-write · mandatory The WEP key #3 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bWep128bitkey4 | 1.3.6.1.4.1.3955.2.6.2.15 | OCTET STRING (SIZE (0..26)) | RW | mandatory |
scalar · OCTET STRING (SIZE (0..26)) · read-write · mandatory The WEP key #4 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. | ||||
| Sieee80211bBeaconInterval | 1.3.6.1.4.1.3955.2.6.2.16 | INTEGER (0..65535) | RW | mandatory |
scalar · INTEGER (0..65535) · read-write · mandatory This value specifies the beacon interval duration in miliseconds. | ||||
| Sieee80211bRTSThreshold | 1.3.6.1.4.1.3955.2.6.2.17 | INTEGER (0..2347) | RW | mandatory |
scalar · INTEGER (0..2347) · read-write · mandatory This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the address1 field, and the length of the MPDU is greater than this threshold. Setting this attribute to be larger than the maximum MSDU size shall have the effect of turnning off the RTS/CTS handshake for frames of Data and Management type transmitted by this device. Setting this attribute to zero shall have the effect of turnning on the RTS/CTS handshake for all frames of Data and Management type transmitted by the device. | ||||
| Sieee80211bFragmentThreshold | 1.3.6.1.4.1.3955.2.6.2.18 | INTEGER (256..2346) | RW | mandatory |
scalar · INTEGER (256..2346) · read-write · mandatory This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in Address1 field, and the length of frame is larger than this threshold. | ||||
| Sieee80211bDTIMInterval | 1.3.6.1.4.1.3955.2.6.2.19 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory Specify the number of beacon intervals that shall elapse between transmission of Beacon frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. | ||||
| Sieee80211bBasicRate | 1.3.6.1.4.1.3955.2.6.2.20 | INTEGER (1..15) | RW | mandatory |
scalar · INTEGER (1..15) · read-write · mandatory The value is a bit-map of basic data rates. It specifies the basic rates used and reported for this BSS by the AP. The highest rate specified is the rate that the AP uses when transmitting broadcast/multicast and management frames. Bit0 = 1Mbps, Bit1 = 2Mbps, Bit2 = 5.5Mbps, and Bit3 = 11Mbps. The basic data rates also specifies the rates that must be supported by all stations to join this BSS. | ||||
| Sieee80211bTXRate | 1.3.6.1.4.1.3955.2.6.2.21 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The default transmission rate of the staion or access point. When set as auto-fallback, the tx rate auto-fallback between 11, 5.5, 2, and 1Mbps.
| ||||
| Sieee80211bPreambleType | 1.3.6.1.4.1.3955.2.6.2.22 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory For wireless stations, this attribute specifies whether frames are transmitted with the short or long preamble. For access points, when set to shortPreamble, it force the AP to disallow associations from stations that do not support short preamble. In longPreamble mode, it allow all stations to associate, which carries the risk that legacy systems may associate with the BSS and then proceed to interfere with the short preamble packets.
| ||||
| Sieee80211bRadioFunction | 1.3.6.1.4.1.3955.2.6.2.23 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable/Disable the RF radio function. When disable, no RF signal will be generated on the air, also no RF signal will be received. But the MAC function of the wireless interface is still working. When enable, the interface is working normally.
| ||||
| Sieee80211bDeviceFunction | 1.3.6.1.4.1.3955.2.6.2.24 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable/Disable the function of the device. When disable, not only the RF radio is turned off, but also the MAC function of wireless interface is also turned off. When enable, the interface is working normally.
| ||||
| Sieee80211bDomain | 1.3.6.1.4.1.3955.2.6.2.25 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The attribute describe the regulatory domain the PLCP and PMD support in this wireless interface.
| ||||
| Sieee80211bSignalStrength | 1.3.6.1.4.1.3955.2.6.2.26 | INTEGER (0..100) | RO | mandatory |
scalar · INTEGER (0..100) · read-only · mandatory The signal strength of the current wireless connection. The unit is percentage. It's only valid for wireless station in infrastructure mode. When the link is disconnected, the value should be 0. | ||||
| Sieee80211bOperationMode | 1.3.6.1.4.1.3955.2.6.2.27 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specify the type of BSS the station shall use when scanning for a BSS with which to connect. When set to infrastructure, the station shall only connect to an Access Point. When set to adhoc, the station shall only connect to an IBSS network.
| ||||
| Sieee80211bPassPhrase | 1.3.6.1.4.1.3955.2.6.2.28 | DisplayString (SIZE (0..30)) | RW | mandatory |
scalar · DisplayString (SIZE (0..30)) · read-write · mandatory The ASCII string used to generate the actual 4 WEP keys. The length of the attribute can be 0 to 30. The algorithm of the WEP key generation is based on the algorithm proposed by Intersil. The algorithm to generate 64-bit WEP key and 128-bit WEP key are different. When in 64-bit mode, it uses Intersil's proprietary algorithm to generate 4 different WEP keys. When in 128-bit mode, it uses MD5 to generate 4 WEP keys with identical key value. | ||||
| Sieee80211bLinkQuality | 1.3.6.1.4.1.3955.2.6.2.29 | INTEGER (0..100) | RO | mandatory |
scalar · INTEGER (0..100) · read-only · mandatory The link quality of the current wireless connection. The unit is percentage. If the link is disconnected, the value should be 0. | ||||
| Nieee80211a | 1.3.6.1.4.1.3955.2.6.3 | |||
| Sieee80211aBroadcastSSID | 1.3.6.1.4.1.3955.2.6.3.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get enable or disable broadcast SSID
| ||||
| Sieee80211aSSIDString | 1.3.6.1.4.1.3955.2.6.3.2 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory set/get SSID String | ||||
| Sieee80211aChannel | 1.3.6.1.4.1.3955.2.6.3.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get Current Channel, 42/50/58 channel is for turbo mode
| ||||
| Sieee80211aWep | 1.3.6.1.4.1.3955.2.6.3.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get enable or disable WEP encryption
| ||||
| Sieee80211aWepauthmethod | 1.3.6.1.4.1.3955.2.6.3.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get Authentication method
| ||||
| Sieee80211aDefaultKey | 1.3.6.1.4.1.3955.2.6.3.6 | INTEGER (1..4) | RW | mandatory |
scalar · INTEGER (1..4) · read-write · mandatory set/get the default WEP KEY ID | ||||
| Sieee80211aWepbits | 1.3.6.1.4.1.3955.2.6.3.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get WEP encryption bit length
| ||||
| Sieee80211aWep64bitkey1 | 1.3.6.1.4.1.3955.2.6.3.8 | DisplayString (SIZE (0..10)) | RW | mandatory |
scalar · DisplayString (SIZE (0..10)) · read-write · mandatory set/get 64bit key 1 | ||||
| Sieee80211aWep64bitkey2 | 1.3.6.1.4.1.3955.2.6.3.9 | DisplayString (SIZE (0..10)) | RW | mandatory |
scalar · DisplayString (SIZE (0..10)) · read-write · mandatory set/get 64bit key 2 | ||||
| Sieee80211aWep64bitkey3 | 1.3.6.1.4.1.3955.2.6.3.10 | DisplayString (SIZE (0..10)) | RW | mandatory |
scalar · DisplayString (SIZE (0..10)) · read-write · mandatory set/get 64bit key 3 | ||||
| Sieee80211aWep64bitkey4 | 1.3.6.1.4.1.3955.2.6.3.11 | DisplayString (SIZE (0..10)) | RW | mandatory |
scalar · DisplayString (SIZE (0..10)) · read-write · mandatory set/get 64bit key 4 | ||||
| Sieee80211aWep128bitkey1 | 1.3.6.1.4.1.3955.2.6.3.12 | DisplayString (SIZE (0..26)) | RW | mandatory |
scalar · DisplayString (SIZE (0..26)) · read-write · mandatory set/get 128 bit key 1 | ||||
| Sieee80211aWep128bitkey2 | 1.3.6.1.4.1.3955.2.6.3.13 | DisplayString (SIZE (0..26)) | RW | mandatory |
scalar · DisplayString (SIZE (0..26)) · read-write · mandatory set/get 128 bit key 2 | ||||
| Sieee80211aWep128bitkey3 | 1.3.6.1.4.1.3955.2.6.3.14 | DisplayString (SIZE (0..26)) | RW | mandatory |
scalar · DisplayString (SIZE (0..26)) · read-write · mandatory set/get 128 bit key 3 | ||||
| Sieee80211aWep128bitkey4 | 1.3.6.1.4.1.3955.2.6.3.15 | DisplayString (SIZE (0..26)) | RW | mandatory |
scalar · DisplayString (SIZE (0..26)) · read-write · mandatory set/get 128 bit key 4 | ||||
| Sieee80211aWep152bitkey1 | 1.3.6.1.4.1.3955.2.6.3.16 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory set/get 152 bit key 1 | ||||
| Sieee80211aWep152bitkey2 | 1.3.6.1.4.1.3955.2.6.3.17 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory set/get 152 bit key 2 | ||||
| Sieee80211aWep152bitkey3 | 1.3.6.1.4.1.3955.2.6.3.18 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory set/get 152 bit key 3 | ||||
| Sieee80211aWep152bitkey4 | 1.3.6.1.4.1.3955.2.6.3.19 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory set/get 152 bit key 4 | ||||
| Sieee80211aBeaconInterval | 1.3.6.1.4.1.3955.2.6.3.20 | INTEGER (0..65535) | RW | mandatory |
scalar · INTEGER (0..65535) · read-write · mandatory set/get Beacon Interval | ||||
| Sieee80211aRTSThreshold | 1.3.6.1.4.1.3955.2.6.3.21 | INTEGER (0..2432) | RW | mandatory |
scalar · INTEGER (0..2432) · read-write · mandatory set/get RTS Threshold | ||||
| Sieee80211aFragmentThreshold | 1.3.6.1.4.1.3955.2.6.3.22 | INTEGER (0..2346) | RW | mandatory |
scalar · INTEGER (0..2346) · read-write · mandatory set/get Fragmentation Threshold | ||||
| Sieee80211aDTIMInterval | 1.3.6.1.4.1.3955.2.6.3.23 | INTEGER (0..255) | RW | mandatory |
scalar · INTEGER (0..255) · read-write · mandatory set/get DTIM Interval | ||||
| Sieee80211aBasicRate | 1.3.6.1.4.1.3955.2.6.3.24 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get Basic rate
| ||||
| Sieee80211aTXRate | 1.3.6.1.4.1.3955.2.6.3.25 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get Transmit rate
| ||||
| Sieee80211aTurboMode | 1.3.6.1.4.1.3955.2.6.3.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current set/get enable or disable turbo mode
| ||||
| Sieee80211aPhyOFDMEnable | 1.3.6.1.4.1.3955.2.6.3.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current set/get enable or disable OFDM modulation
| ||||
| Sieee80211aPhyOFDMAutoChannelSelect | 1.3.6.1.4.1.3955.2.6.3.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current set/get enable or disable auto find the channel with less interference
| ||||
| Sieee80211aRadioFunction | 1.3.6.1.4.1.3955.2.6.3.29 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get enable or disable radio function
| ||||
| Sieee80211aDeviceFunction | 1.3.6.1.4.1.3955.2.6.3.30 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get enable or disable device
| ||||
| Sieee80211aDomain | 1.3.6.1.4.1.3955.2.6.3.31 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Get regular domain
| ||||
| Sieee80211aSignalStrength | 1.3.6.1.4.1.3955.2.6.3.32 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Get signal strength (for NIC) | ||||
| Sieee80211aOperationMode | 1.3.6.1.4.1.3955.2.6.3.33 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory set/get The operation mode of this NIC.
| ||||
| Sieee80211aLinkQuality | 1.3.6.1.4.1.3955.2.6.3.34 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Get the link quality of this NIC. | ||||
| NadslRemoteNode | 1.3.6.1.4.1.3955.2.7 | |||
| SremoteNodeNumber | 1.3.6.1.4.1.3955.2.7.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of network interfaces (regardless of their current state) present on this system. | ||||
| SremoteNodeErrString | 1.3.6.1.4.1.3955.2.7.2 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The error status of saving one remote node settings. The string will clear once it is accessed from the SNMP server. | ||||
| TremoteNodeStatusTable | 1.3.6.1.4.1.3955.2.7.3 | NA | mandatory | |
table · not-accessible · mandatory A list of remote node status entries. | ||||
| RremoteNodeStatusEntry | 1.3.6.1.4.1.3955.2.7.3.1 | NA | mandatory | |
row · not-accessible · mandatory An remote node status entry containing comment object for a remote node status. | ||||
| CremoteNodeStatusIndex | 1.3.6.1.4.1.3955.2.7.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index of remote node status entry. | ||||
| CremoteNodeStatusIfIndex | 1.3.6.1.4.1.3955.2.7.3.1.2 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | ||||
| CremoteNodeStatus | 1.3.6.1.4.1.3955.2.7.3.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object allows you to activate/deactivate/delete this remote node.
| ||||
| CremoteNodeISPnode | 1.3.6.1.4.1.3955.2.7.3.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The object allows you to set the remote node to ISP node.
| ||||
| TremoteNodeGeneralTable | 1.3.6.1.4.1.3955.2.7.4 | NA | mandatory | |
table · not-accessible · mandatory A list of remote node general entries. | ||||
| RremoteNodeGeneralEntry | 1.3.6.1.4.1.3955.2.7.4.1 | NA | mandatory | |
row · not-accessible · mandatory An remote node general entry containing comment object for a remote node general information. | ||||
| CremoteNodeGeneralIndex | 1.3.6.1.4.1.3955.2.7.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index of remote node general entry. | ||||
| CremoteNodeGeneralIfIndex | 1.3.6.1.4.1.3955.2.7.4.1.2 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | ||||
| CremoteNodeName | 1.3.6.1.4.1.3955.2.7.4.1.3 | DisplayString (SIZE (0..10)) | RW | mandatory |
column · DisplayString (SIZE (0..10)) · read-write · mandatory The name of the Internet service provider. This information is for identification purpose only. | ||||
| CremoteNodeEncap | 1.3.6.1.4.1.3955.2.7.4.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This if the method of encapsulation used by the ISP.
| ||||
| CremoteNodeMultiplex | 1.3.6.1.4.1.3955.2.7.4.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This if the methos of multiplexing used by the ISP. Choices are vc-based or llc-based
| ||||
| CremoteNodeServiceName | 1.3.6.1.4.1.3955.2.7.4.1.6 | DisplayString (SIZE (0..32)) | RW | mandatory |
column · DisplayString (SIZE (0..32)) · read-write · mandatory The PPPoE service name. This is valid only when PPPoE encapsulation is chosen. | ||||
| CremoteNodeAuthen | 1.3.6.1.4.1.3955.2.7.4.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object sets the authentication protocol used for outgoing calls. Options for this object are : chap/pap - Your Device will accept CHAP or PAP. chap - Your Device will accept CHAP. PAP - Your Device will accept PAP.
| ||||
| CremoteNodeRoute | 1.3.6.1.4.1.3955.2.7.4.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object determines the protocol that your Device will route. Choices are IP or none.
| ||||
| CremoteNodeBridge | 1.3.6.1.4.1.3955.2.7.4.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Bridging is used for protocols that the Device does not route, e.g. SNA, or not truned on in the previous Route object. When bridging is enabled, your Device will forward any packet that it does not route to this remote node; otherwise, the packets are discarded. Choose Yes to enable or No to disable the Bridge field.
| ||||
| TremoteNodeATMTable | 1.3.6.1.4.1.3955.2.7.5 | NA | mandatory | |
table · not-accessible · mandatory A list of remote node ATM entries. | ||||
| RremoteNodeATMEntry | 1.3.6.1.4.1.3955.2.7.5.1 | NA | mandatory | |
row · not-accessible · mandatory An remote node ATM entry containing comment object for a remote node ATM information.
| ||||
| CremoteNodeATMIndex | 1.3.6.1.4.1.3955.2.7.5.1.1 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The index of remote node ATM entry. | ||||
| CremoteNodeATMIfIndex | 1.3.6.1.4.1.3955.2.7.5.1.2 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. | ||||
| CremoteNodeVPI | 1.3.6.1.4.1.3955.2.7.5.1.3 | INTEGER (0..255) | RW | mandatory |
column · INTEGER (0..255) · read-write · mandatory The Virtual Path Identifier(VPI) is supplied by your telephone company. The valid range for the VPI is 0 to 255. | ||||
| CremoteNodeVCI | 1.3.6.1.4.1.3955.2.7.5.1.4 | INTEGER (32..65535) | RW | mandatory |
column · INTEGER (32..65535) · read-write · mandatory The Virtual Channel Identifier(VCI) number is supplied by your telephone company. The valid range is 32 to 65535. | ||||
| CremoteNodeQosType | 1.3.6.1.4.1.3955.2.7.5.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the ATM Qos Type. There are 2 options: cbr and ubr. cbr (Continuous Bit Rate) specifys fixed (always-on) bandwidth. UBR (Unspecified Bit Rage) is for applications that are non-time senstive, such as e-mail.
| ||||
| CremoteNodePCR | 1.3.6.1.4.1.3955.2.7.5.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the maximum rate at shich the sender can send cells. | ||||
| CremoteNodeSCR | 1.3.6.1.4.1.3955.2.7.5.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Sustained Cell Rate (SCR) is the mean cell rate of a bursty, on-off traffic source that can be sent at the peak rate, and a parameter for burst-type traffic. The SCR must be less than the PCR. | ||||
| CremoteNodeMBS | 1.3.6.1.4.1.3955.2.7.5.1.8 | INTEGER (0..65535) | RW | mandatory |
column · INTEGER (0..65535) · read-write · mandatory MBS is the Maximum Burst Size of cells that can be sent at the peak rate. The MBS must be less than 65535 | ||||
| Ncontrol | 1.3.6.1.4.1.3955.3 | |||
| TfilterIPRangeTable | 1.3.6.1.4.1.3955.3.1 | NA | mandatory | |
table · not-accessible · mandatory A list of filter IP range entry. | ||||
| RfilterIPRangeEntry | 1.3.6.1.4.1.3955.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Filter IP range entry can be used to block specific internal users from accessing the Internet. Each entry has start IP and end IP settings, if user's IP is in this range, he will be blocked.
| ||||
| CfilterIPRangeIndex | 1.3.6.1.4.1.3955.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Index of filter IP range table. | ||||
| CfilterIPStart | 1.3.6.1.4.1.3955.3.1.1.2 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Start IP address of filter IP range entry. | ||||
| CfilterIPEnd | 1.3.6.1.4.1.3955.3.1.1.3 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory End IP address of filter IP range entry. | ||||
| TfilterPortRangeTable | 1.3.6.1.4.1.3955.3.2 | NA | mandatory | |
table · not-accessible · mandatory A list of filter port range entry. | ||||
| RfilterPortRangeEntry | 1.3.6.1.4.1.3955.3.2.1 | NA | mandatory | |
row · not-accessible · mandatory Filter port range entry can be used to block specific packets from going out to Internet. Each entry has protocol and port range settings, if out-going packet's destination port is in this port range and protocol is identical, then it will be blocked.
| ||||
| CfilterPortRangeIndex | 1.3.6.1.4.1.3955.3.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Index of filter port range table. | ||||
| CfilterPortProto | 1.3.6.1.4.1.3955.3.2.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Protocol setting of FilterPortRangeEntry, it can be TCP, UDP or both (TCP and UDP).
| ||||
| CfilterPortStart | 1.3.6.1.4.1.3955.3.2.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Start port setting of FilterPortRangeEntry | ||||
| CfilterPortEnd | 1.3.6.1.4.1.3955.3.2.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory End port setting of FilterPortRangeEntry | ||||
| TfilterMACTable | 1.3.6.1.4.1.3955.3.3 | NA | mandatory | |
table · not-accessible · mandatory A list of filter Mac entry. | ||||
| RfilterMACEntry | 1.3.6.1.4.1.3955.3.3.1 | NA | mandatory | |
row · not-accessible · mandatory Filter MAC range entry can be used to block specific internal users from accessing the Internet. Each entry has a MAC setting, if user's MAC is identical with this setting, he will be blocked.
| ||||
| CfilterMACIndex | 1.3.6.1.4.1.3955.3.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Index of filterMACTable. | ||||
| CfilterMAC | 1.3.6.1.4.1.3955.3.3.1.2 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory The MAC setting of filterMACEntry. | ||||
| TforwardTable | 1.3.6.1.4.1.3955.3.4 | NA | mandatory | |
table · not-accessible · mandatory A list of forwardEntry. | ||||
| RforwardEntry | 1.3.6.1.4.1.3955.3.4.1 | NA | mandatory | |
row · not-accessible · mandatory You can use Forwarding to set up public services on your network. When user send this type of request to your network via the Internet, the router will forward those requests to the appropriate PC.
| ||||
| CforwardIndex | 1.3.6.1.4.1.3955.3.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Index of forwardTable | ||||
| CservicePortStart | 1.3.6.1.4.1.3955.3.4.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The start port setting of forward public service port range. | ||||
| CservicePortEnd | 1.3.6.1.4.1.3955.3.4.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The end port setting of forward public service port range. | ||||
| CservicePortProto | 1.3.6.1.4.1.3955.3.4.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The protocol setting of forward public service port range.
| ||||
| CforwardIPAddress | 1.3.6.1.4.1.3955.3.4.1.5 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The LAN side forward server IP address. | ||||
| TportTriggeringTable | 1.3.6.1.4.1.3955.3.5 | NA | mandatory | |
table · not-accessible · mandatory A list of portTriggeringEntry | ||||
| RportTriggeringEntry | 1.3.6.1.4.1.3955.3.5.1 | NA | mandatory | |
row · not-accessible · mandatory Port triggering allows the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that when the requested data returns through the firewall, the data is pulled back to the proper computer by way of IP address and port mapping rules.
| ||||
| CportTriggeringIndex | 1.3.6.1.4.1.3955.3.5.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Index of portTriggeringTable. | ||||
| CappName | 1.3.6.1.4.1.3955.3.5.1.2 | DisplayString (SIZE (0..12)) | RW | mandatory |
column · DisplayString (SIZE (0..12)) · read-write · mandatory Name description of this portTriggeringEntry. | ||||
| CtriggerPortStart | 1.3.6.1.4.1.3955.3.5.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The start port of triggering port range. | ||||
| CtriggerPortEnd | 1.3.6.1.4.1.3955.3.5.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The end port of triggering port range. | ||||
| CincomingPortStart | 1.3.6.1.4.1.3955.3.5.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The start port of incoming port range. | ||||
| CincomingPortEnd | 1.3.6.1.4.1.3955.3.5.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The end port of incoming port range. | ||||
| TwlanAccessMACTable | 1.3.6.1.4.1.3955.3.6 | NA | mandatory | |
table · not-accessible · mandatory Table of wireless station physical addresses that will put under control. | ||||
| RwlanAccessMACEntry | 1.3.6.1.4.1.3955.3.6.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table controls the assocaition with access point for each wireless station.
| ||||
| CwlanAccessMACIndex | 1.3.6.1.4.1.3955.3.6.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each wireless station. | ||||
| CwlanAccessMAC | 1.3.6.1.4.1.3955.3.6.1.2 | PhysAddress | RW | mandatory |
column · PhysAddress · read-write · mandatory Specifies the physical address to which will be controlled the association state with the access point. | ||||
| CwlanAccessStatus | 1.3.6.1.4.1.3955.3.6.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the association state with the access point for the specified wireless client.
| ||||
| TuPnPforwardTable | 1.3.6.1.4.1.3955.3.7 | NA | mandatory | |
table · not-accessible · mandatory A list of UPnP forwarding application setting entry. | ||||
| RuPnPforwardEntry | 1.3.6.1.4.1.3955.3.7.1 | NA | mandatory | |
row · not-accessible · mandatory UPnP forwarding entry can be used to preset application setting as well as options for customization of port services for other applications.
| ||||
| CuPnPforwardIndex | 1.3.6.1.4.1.3955.3.7.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An unique value for each UPnP forwarding setting. | ||||
| CuPnPserviceName | 1.3.6.1.4.1.3955.3.7.1.2 | DisplayString (SIZE (0..11)) | RW | mandatory |
column · DisplayString (SIZE (0..11)) · read-write · mandatory Indicates the most widely used Internet applicaiton name. Such as FTP, Telnet, SMTP and DNS. | ||||
| CuPnPExtPort | 1.3.6.1.4.1.3955.3.7.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the external port number used by Internet application server. Check with the Internet application software documentation for more information. | ||||
| CuPnPservicePortProto | 1.3.6.1.4.1.3955.3.7.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the Transport layer protocol to which this Internet application will use.
| ||||
| CuPnPIntPort | 1.3.6.1.4.1.3955.3.7.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Specifies the internal port number used by Internet application server. Check with the Internet application software documentation for more information. | ||||
| CuPnPforwardIPAddress | 1.3.6.1.4.1.3955.3.7.1.6 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory Specifies the IP address of Internet application server to which the Internet users can access. | ||||
| CuPnPforwardStatus | 1.3.6.1.4.1.3955.3.7.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates whether to enable the defined service.
| ||||
| Ninformation | 1.3.6.1.4.1.3955.4 | |||
| NstatusInfo | 1.3.6.1.4.1.3955.4.1 | |||
| TdhcpActiveTable | 1.3.6.1.4.1.3955.4.1.1 | NA | mandatory | |
table · not-accessible · mandatory A list of dhcpActiveEntry. | ||||
| RdhcpActiveEntry | 1.3.6.1.4.1.3955.4.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory The dhcpActiveEntry shows out the information of DHCP client PCs.
| ||||
| CdhcpActiveIndex | 1.3.6.1.4.1.3955.4.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index of dhcpActiveTable. | ||||
| CdhcpClientHostName | 1.3.6.1.4.1.3955.4.1.1.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory The host name of DHCP client PC. | ||||
| CdhcpNetAddress | 1.3.6.1.4.1.3955.4.1.1.1.3 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP address of DHCP client PC. | ||||
| CdhcpPhysicalAddress | 1.3.6.1.4.1.3955.4.1.1.1.4 | PhysAddress | RO | mandatory |
column · PhysAddress · read-only · mandatory The MAC address of DHCP client PC. | ||||
| ToutgoingLogTable | 1.3.6.1.4.1.3955.4.1.2 | NA | mandatory | |
table · not-accessible · mandatory A list of outgoingLogEntry. | ||||
| RoutgoingLogEntry | 1.3.6.1.4.1.3955.4.1.2.1 | NA | mandatory | |
row · not-accessible · mandatory The outgoing log entry lists the IP address of Internet site that users on your network have accessed.
| ||||
| CoutgoingLogIndex | 1.3.6.1.4.1.3955.4.1.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index of outgoingLogTable | ||||
| CsourceIPLAN | 1.3.6.1.4.1.3955.4.1.2.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The source IP address of the outgoing log entry. | ||||
| CdestinationIP | 1.3.6.1.4.1.3955.4.1.2.1.3 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The destination IP address of the outgoing log entry. | ||||
| CservicePortNumber | 1.3.6.1.4.1.3955.4.1.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The destination port number of the outgoing log entry. | ||||
| TincomingLogTable | 1.3.6.1.4.1.3955.4.1.3 | NA | mandatory | |
table · not-accessible · mandatory A list of incomingLogEntry. | ||||
| RincomingLogEntry | 1.3.6.1.4.1.3955.4.1.3.1 | NA | mandatory | |
row · not-accessible · mandatory The incoming log entry shows out the log of incoming Internet traffic.
| ||||
| CincomingLogIndex | 1.3.6.1.4.1.3955.4.1.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Index of incomingLogTable. | ||||
| CsourceIP | 1.3.6.1.4.1.3955.4.1.3.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The source IP address of incoming log entry. | ||||
| CdestinationPortNumber | 1.3.6.1.4.1.3955.4.1.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The destination port number of incoming log entry. | ||||
| TinfWANStatusTable | 1.3.6.1.4.1.3955.4.1.4 | NA | mandatory | |
table · not-accessible · mandatory Table of WAN connection status. | ||||
| RinfWANStatusEntry | 1.3.6.1.4.1.3955.4.1.4.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the table, containing connection status of one WAN interface.
| ||||
| CinfWANStatusIndex | 1.3.6.1.4.1.3955.4.1.4.1.1 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated Index of infWANStatusTable. | ||||
| CinfWANPortStatus | 1.3.6.1.4.1.3955.4.1.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Show the WAN Port physical link status
| ||||
| CinfWANPPPoEFailureCode | 1.3.6.1.4.1.3955.4.1.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Show out the WAN PPPoE connection status.
| ||||
| CinfWANPPPoEDetailErrorCode | 1.3.6.1.4.1.3955.4.1.4.1.4 | DisplayString (SIZE (0..4)) | RO | mandatory |
column · DisplayString (SIZE (0..4)) · read-only · mandatory Detail error code of the current PPPoE connection. | ||||
| CinfWANDHCPStatus | 1.3.6.1.4.1.3955.4.1.4.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Show out the status of WAN DHCP.
| ||||
| CinfWANDHCPDetailErrorCode | 1.3.6.1.4.1.3955.4.1.4.1.6 | DisplayString (SIZE (0..4)) | RO | mandatory |
column · DisplayString (SIZE (0..4)) · read-only · mandatory Detail error code of the current DHCP connection. | ||||
| CinfWANDNSStatus | 1.3.6.1.4.1.3955.4.1.4.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Show the WAN DNS status.
| ||||
| CinfWANPPTPFailureCode | 1.3.6.1.4.1.3955.4.1.4.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Show the WAN PPTP connection status.
| ||||
| CinfWANPPTPDetailErrorCode | 1.3.6.1.4.1.3955.4.1.4.1.9 | DisplayString (SIZE (0..4)) | RO | mandatory |
column · DisplayString (SIZE (0..4)) · read-only · mandatory Detail error code of the current PPTP connection. | ||||
| SinfNodeWLANStatus | 1.3.6.1.4.1.3955.4.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Show the WLAN status.
| ||||
| SnicDevicePresent | 1.3.6.1.4.1.3955.4.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The target device is present on the system or not.
| ||||
| SnicDriverInstallation | 1.3.6.1.4.1.3955.4.1.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The driver was installed or not.
| ||||
| SnicDriverStatus | 1.3.6.1.4.1.3955.4.1.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The working status of the driver.
| ||||
| SnicConnectionStatus | 1.3.6.1.4.1.3955.4.1.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The connection status of the device.
| ||||
| SnicOSVersion | 1.3.6.1.4.1.3955.4.1.10 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The version number of the Windows OS. | ||||
| SnicDriverVersion | 1.3.6.1.4.1.3955.4.1.11 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The version number of the device driver | ||||
| SnicFirmwareVersion | 1.3.6.1.4.1.3955.4.1.12 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The version number of the device firmware | ||||
| SnicUtilityVersion | 1.3.6.1.4.1.3955.4.1.13 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The version number of the configure Utility | ||||
| NstatisticsInfo | 1.3.6.1.4.1.3955.4.2 | |||
| Nproducts | 1.3.6.1.4.1.3955.5 | |||
| NprintServer | 1.3.6.1.4.1.3955.5.1 | |||
| NnetworkStorageServer | 1.3.6.1.4.1.3955.5.2 | |||