MIB Browser

LINKSYS-HWENVIROMENT

Linksys
The private MIB module definition for environment of Linksys devices.
Organization
Linksys LLC.
Root OID
1.3.6.1.4.1.3955.1000.201.83
Last updated
Objects
23
Source
Show full MIB
snmptranslate -m LINKSYS-HWENVIROMENT -Tp
snmpwalk -v2c -c <community> -m LINKSYS-HWENVIROMENT <host> 1.3.6.1.4.1.3955.1000.201.83

Imports

LINKSYS-MIBrnd
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
IrlEnv1.3.6.1.4.1.3955.1000.201.83
NrlEnvPhysicalDescription1.3.6.1.4.1.3955.1000.201.83.1
TrlEnvMonFanStatusTable1.3.6.1.4.1.3955.1000.201.83.1.1NA
RrlEnvMonFanStatusEntry1.3.6.1.4.1.3955.1000.201.83.1.1.1NA
CrlEnvMonFanStatusIndex1.3.6.1.4.1.3955.1000.201.83.1.1.1.1INTEGERNA
CrlEnvMonFanStatusDescr1.3.6.1.4.1.3955.1000.201.83.1.1.1.2DisplayString (SIZE (0..32))RO
CrlEnvMonFanState1.3.6.1.4.1.3955.1000.201.83.1.1.1.3RlEnvMonStateRO
TrlEnvMonSupplyStatusTable1.3.6.1.4.1.3955.1000.201.83.1.2NA
RrlEnvMonSupplyStatusEntry1.3.6.1.4.1.3955.1000.201.83.1.2.1NA
CrlEnvMonSupplyStatusIndex1.3.6.1.4.1.3955.1000.201.83.1.2.1.1INTEGER (0..2147483647)NA
CrlEnvMonSupplyStatusDescr1.3.6.1.4.1.3955.1000.201.83.1.2.1.2DisplayString (SIZE (0..32))RO
CrlEnvMonSupplyState1.3.6.1.4.1.3955.1000.201.83.1.2.1.3RlEnvMonStateRO
CrlEnvMonSupplySource1.3.6.1.4.1.3955.1000.201.83.1.2.1.4INTEGERRO
CrlEnvMonSupplyFanDirection1.3.6.1.4.1.3955.1000.201.83.1.2.1.5RlEnvMonDirectionRO
NrlEnvFanData1.3.6.1.4.1.3955.1000.201.83.5
TrlEnvFanDataTable1.3.6.1.4.1.3955.1000.201.83.5.1NA
RrlEnvFanDataEntry1.3.6.1.4.1.3955.1000.201.83.5.1.1NA
CrlEnvFanDataStackUnit1.3.6.1.4.1.3955.1000.201.83.5.1.1.1INTEGERRO
CrlEnvFanDataTemp1.3.6.1.4.1.3955.1000.201.83.5.1.1.2INTEGERRO
CrlEnvFanDataSpeed1.3.6.1.4.1.3955.1000.201.83.5.1.1.3INTEGERRO
CrlEnvFanDataOperLevel1.3.6.1.4.1.3955.1000.201.83.5.1.1.4INTEGERRO
CrlEnvFanDataAdminLevel1.3.6.1.4.1.3955.1000.201.83.5.1.1.5INTEGERRW
CrlEnvFanDataDirection1.3.6.1.4.1.3955.1000.201.83.5.1.1.6RlEnvMonDirectionRO

Textual conventions

RlEnvMonDirection INTEGER

backToFront(3) clockwise(4) frontToBack(2) insideOut(6) leftToRight(9) outsideIn(7) rightToLeft(8) unClockwise(5) unKnown(1)

Represents the state of a device being monitored.
Valid values are:

unKnown(1):        if the board not support air flow direction.

frontToBack(2):    the air flow direction of the fan is front to back.

backToFront(3):    the air flow direction of the fan is back to front.

clockwise(4):      the air flow direction of the fan is clock wise

unClockwise(5):    the air flow direction of the fan is unclock wise

insideOutside(6):  the air flow direction of the fan is inside outside

outsideInside(7):  the air flow direction of the fan is outside inside

rightToLeft(8):    the air flow direction of the fan is from right to left

leftToRight(9):    the air flow direction of the fan is from left to right
RlEnvMonState INTEGER

critical(3) normal(1) notFunctioning(6) notPresent(5) shutdown(4) warning(2)

Represents the state of a device being monitored.
Valid values are:

normal(1):         the environment is good, such as low
                   temperature.

warning(2):        the environment is bad, such as temperature
                   above normal operation range but not too
                   high.

critical(3):       the environment is very bad, such as
                   temperature much higher than normal
                   operation limit.

shutdown(4):       the environment is the worst, the system
                   should be shutdown immediately.

notPresent(5):     the environmental monitor is not present,
                   such as temperature sensors do not exist.

notFunctioning(6): the environmental monitor does not
                   function properly, such as a temperature
                   sensor generates a abnormal data like
                   1000 C.

Used by