LIGO-WIRELESS-MIB
LigoWaveThe LigoWave Wireless MIB.
snmptranslate -m LIGO-WIRELESS-MIB -Tpsnmpwalk -v2c -c <community> -m LIGO-WIRELESS-MIB <host> 1.3.6.1.4.1.32750.3.10Imports
| IF-MIB | ifIndex, ifPhysAddress |
|---|---|
| LIGOWAVE-MIB | ligoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | sysLocation |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IligoWirelessMIB | 1.3.6.1.4.1.32750.3.10 | ||||||||||||
identity The LigoWave Wireless MIB. | |||||||||||||
| NligoWirelessMIBObjects | 1.3.6.1.4.1.32750.3.10.1 | ||||||||||||
| NligoWiNotifs | 1.3.6.1.4.1.32750.3.10.1.0 | ||||||||||||
| !ligoWiFrequencyChange | 1.3.6.1.4.1.32750.3.10.1.0.1 | ||||||||||||
notification · current This notification is sent on frequency change.
| |||||||||||||
| !ligoWiNoiseThresholdReached | 1.3.6.1.4.1.32750.3.10.1.0.2 | ||||||||||||
notification · current This notification is sent when noise becomes bigger than threshold.
| |||||||||||||
| !ligoWiRemoteNodeConnected | 1.3.6.1.4.1.32750.3.10.1.0.3 | ||||||||||||
notification · current This notification is sent when remote node associates. | |||||||||||||
| !ligoWiRemoteNodeDisconnected | 1.3.6.1.4.1.32750.3.10.1.0.4 | ||||||||||||
notification · current This notification is sent when remote node dissasociates. | |||||||||||||
| !ligoWiLinkQualThresholdReached | 1.3.6.1.4.1.32750.3.10.1.0.5 | ||||||||||||
notification · current This notification is sent when link quality crosses the specified threshold.
| |||||||||||||
| !ligoWiRxErrorsThreshold | 1.3.6.1.4.1.32750.3.10.1.0.6 | ||||||||||||
notification · current This notification is sent when percentage of erroneous frames in relation to number of frames received over the same time period reaches the threshold.
| |||||||||||||
| !ligoWiTxRetriesThreshold | 1.3.6.1.4.1.32750.3.10.1.0.7 | ||||||||||||
notification · current This notification is sent when percentage of transmission retries in relation to number of frames transmitted over the same time period reaches the threshold. | |||||||||||||
| NligoWiInfo | 1.3.6.1.4.1.32750.3.10.1.1 | ||||||||||||
| NligoWiConf | 1.3.6.1.4.1.32750.3.10.1.2 | ||||||||||||
| TligoWiIfConfTable | 1.3.6.1.4.1.32750.3.10.1.2.1 | NA | |||||||||||
table · not-accessible · current Wireless interface configuration table. | |||||||||||||
| RligoWiIfConfEntry | 1.3.6.1.4.1.32750.3.10.1.2.1.1 | NA | |||||||||||
| CligoWiIfMacAddress | 1.3.6.1.4.1.32750.3.10.1.2.1.1.1 | MacAddress | RO | 00:19:3b:0e:b3:78 | |||||||||
column · MacAddress · read-only · current Interface MAC address. Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfProtocol | 1.3.6.1.4.1.32750.3.10.1.2.1.1.2 | OCTET STRING (SIZE (0..15)) | RO | iPoll 3 | |||||||||
column · OCTET STRING (SIZE (0..15)) · read-only · current Protocol string, for example 'IEEE 802.11g'. Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfMode | 1.3.6.1.4.1.32750.3.10.1.2.1.1.3 | INTEGER | RO | master(3) | |||||||||
column · INTEGER · read-only · current Wireless interface operation mode.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfESSID | 1.3.6.1.4.1.32750.3.10.1.2.1.1.4 | OCTET STRING (SIZE (0..32)) | RO | 7012MH7013 | |||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current ESSID. Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfCountryCode | 1.3.6.1.4.1.32750.3.10.1.2.1.1.5 | OCTET STRING (SIZE (2..3)) | RO | CT | |||||||||
column · OCTET STRING (SIZE (2..3)) · read-only · current Country code. Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfFrequency | 1.3.6.1.4.1.32750.3.10.1.2.1.1.6 | Integer32 | RO | 5520 | |||||||||
column · Integer32 · read-only · current Current operating frequency.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfChannel | 1.3.6.1.4.1.32750.3.10.1.2.1.1.7 | Integer32 | RO | 104 | |||||||||
column · Integer32 · read-only · current Channel number. Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfChannelBandwidth | 1.3.6.1.4.1.32750.3.10.1.2.1.1.8 | Integer32 | RO | 20 | |||||||||
column · Integer32 · read-only · current Channel bandwidth.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfEncryption | 1.3.6.1.4.1.32750.3.10.1.2.1.1.9 | INTEGER | RO | personalWpa2(8) | |||||||||
column · INTEGER · read-only · current Encryption type.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfTxPower | 1.3.6.1.4.1.32750.3.10.1.2.1.1.10 | Gauge32 | RO | 25 | |||||||||
column · Gauge32 · read-only · current Transmit power in dBm.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfBitRate | 1.3.6.1.4.1.32750.3.10.1.2.1.1.11 | Gauge32 | RO | 173000 | |||||||||
column · Gauge32 · read-only · current Transmission bitrate.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfLinkQuality | 1.3.6.1.4.1.32750.3.10.1.2.1.1.12 | Gauge32 | RO | 45 | |||||||||
column · Gauge32 · read-only · current Link quality value. Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfMaxLinkQuality | 1.3.6.1.4.1.32750.3.10.1.2.1.1.13 | Gauge32 | RO | 98 | |||||||||
column · Gauge32 · read-only · current Maximum possible link quality value for current wireless card. Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfSignalLevel | 1.3.6.1.4.1.32750.3.10.1.2.1.1.14 | Integer32 | RO | -53 | |||||||||
column · Integer32 · read-only · current Signal level.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfNoiseLevel | 1.3.6.1.4.1.32750.3.10.1.2.1.1.15 | Integer32 | RO | -98 | |||||||||
column · Integer32 · read-only · current Noise level.
Example values from LibreNMS test devices
| |||||||||||||
| CligoWiIfAssocNodeCount | 1.3.6.1.4.1.32750.3.10.1.2.1.1.16 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current Number of associated nodes when working in access point mode. 1 - if associated to remote access point in client mode. Example values from LibreNMS test devices
| |||||||||||||
| NligoWiStats | 1.3.6.1.4.1.32750.3.10.1.3 | ||||||||||||
| TligoWiIfStatsTable | 1.3.6.1.4.1.32750.3.10.1.3.1 | NA | |||||||||||
table · not-accessible · current Wireless interface statistics table. | |||||||||||||
| RligoWiIfStatsEntry | 1.3.6.1.4.1.32750.3.10.1.3.1.1 | NA | |||||||||||
| CligoWiIfRxTotal | 1.3.6.1.4.1.32750.3.10.1.3.1.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of total received packets. | |||||||||||||
| CligoWiIfRxErrors | 1.3.6.1.4.1.32750.3.10.1.3.1.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of reception errors. | |||||||||||||
| CligoWiIfTxTotal | 1.3.6.1.4.1.32750.3.10.1.3.1.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of total transmitted packets. | |||||||||||||
| CligoWiIfTxRetries | 1.3.6.1.4.1.32750.3.10.1.3.1.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of transmission retries. | |||||||||||||
| TligoWiRemoteNodeStatsTable | 1.3.6.1.4.1.32750.3.10.1.3.2 | NA | |||||||||||
table · not-accessible · current Remote node statistics table. This table shows statistics for associated or already disconnected clients on wireless interfaces which are operating in access point mode. For interfaces operating in client mode and associated to remote access point information about access point is shown. | |||||||||||||
| RligoWiRemoteNodeStatsEntry | 1.3.6.1.4.1.32750.3.10.1.3.2.1 | NA | |||||||||||
row · not-accessible · current Wireless remote node statistics table entry. | |||||||||||||
| CligoWiRmtNodeMacAddress | 1.3.6.1.4.1.32750.3.10.1.3.2.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current Remote node MAC address. | |||||||||||||
| CligoWiRmtNodeAssociated | 1.3.6.1.4.1.32750.3.10.1.3.2.1.2 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Remote node is currently associated. | |||||||||||||
| CligoWiRmtNodeTxBytes | 1.3.6.1.4.1.32750.3.10.1.3.2.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Bytes transmitted to remote node.
| |||||||||||||
| CligoWiRmtNodeRxBytes | 1.3.6.1.4.1.32750.3.10.1.3.2.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Bytes received from remote node.
| |||||||||||||
| CligoWiRmtNodeSignalLevel | 1.3.6.1.4.1.32750.3.10.1.3.2.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Signal level reported by remote node.
| |||||||||||||
| CligoWiRmtNodeNoiseLevel | 1.3.6.1.4.1.32750.3.10.1.3.2.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Noise level reported by remote node.
| |||||||||||||
Traps / Notifications
- ligoWiFrequencyChange
1.3.6.1.4.1.32750.3.10.1.0.1 - ligoWiLinkQualThresholdReached
1.3.6.1.4.1.32750.3.10.1.0.5 - ligoWiNoiseThresholdReached
1.3.6.1.4.1.32750.3.10.1.0.2 - ligoWiRemoteNodeConnected
1.3.6.1.4.1.32750.3.10.1.0.3 - ligoWiRemoteNodeDisconnected
1.3.6.1.4.1.32750.3.10.1.0.4 - ligoWiRxErrorsThreshold
1.3.6.1.4.1.32750.3.10.1.0.6 - ligoWiTxRetriesThreshold
1.3.6.1.4.1.32750.3.10.1.0.7